From 79ef91493f5494e9ddbad85bf571ec03940a7f5c Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Mon, 13 Jan 2020 12:26:53 +0200 Subject: iio: adc: ad7124: Set IRQ type to falling Ad7124 data-sheet specifies that the falling edge of the DOUT line should be used for an interrupt. The current irq flag (IRQF_TRIGGER_LOW) used will cause unwanted behaviour. When enabling the interrupt it will fire once because the DOUT line is already low. This will make the driver to read an unfinished conversion from the chip. This patch sets the irq type to the one specified in the data-sheet. Signed-off-by: Alexandru Tachici Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ad7124.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/iio') diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index 63df2e2a8caf..52f45b13da4a 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -225,7 +225,7 @@ static const struct ad_sigma_delta_info ad7124_sigma_delta_info = { .addr_shift = 0, .read_mask = BIT(6), .data_reg = AD7124_DATA, - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, }; static int ad7124_set_channel_odr(struct ad7124_state *st, -- cgit v1.2.3-58-ga151