From b7af349b175af45f9d87b3bf3f0a221e1831ed39 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 21 Nov 2008 13:39:45 -0800 Subject: i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg If there is a signal pending and wait_for_completion_interruptible_timeout terminates with -ERESTARTSYS, we return and disable the i2c clocks in omap_i2c_xfer. If we terminate before sending last i2c message with a stop condition, the bus remains busy and we are not able to send new messages into bus with successive omap_i2c_xfer calls. Therefore a pending signal is not caught here and we return only because of timeout or i2c error. Signed-off-by: Jarkko Nikula Signed-off-by: Juha Yrjola Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 608038d64f81..17476ecd9782 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -328,8 +328,12 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, w |= OMAP_I2C_CON_STP; omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); - r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - OMAP_I2C_TIMEOUT); + /* + * REVISIT: We should abort the transfer on signals, but the bus goes + * into arbitration and we're currently unable to recover from it. + */ + r = wait_for_completion_timeout(&dev->cmd_complete, + OMAP_I2C_TIMEOUT); dev->buf_len = 0; if (r < 0) return r; -- cgit v1.2.3-58-ga151