From cb1d93c98c49e268918e35e45e5c407fc4dc4e9f Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 14 May 2007 10:20:29 +0200
Subject: HID: input mapping for Chicony KU-0418 tactical pad

Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate
"tactical pad" with 11 non-functional buttons - they generate usage
codes from 0xff00 (MSVENDOR) usage page. Special case handling for
this keyboard added, so no later clash with MSVENDOR mappings is going
to occur.

Pointed out in bugzilla #7352

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 7f817897b178..ce6d7644e6a1 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -688,7 +688,28 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			break;
 
 		case HID_UP_MSVENDOR:
-			goto ignore;
+
+			/* special case - Chicony Chicony KU-0418 tactical pad */
+			if (device->vendor == 0x04f2 && device->product == 0x0418) {
+				set_bit(EV_REP, input->evbit);
+				switch(usage->hid & HID_USAGE) {
+					case 0xff01: map_key_clear(BTN_1);		break;
+					case 0xff02: map_key_clear(BTN_2);		break;
+					case 0xff03: map_key_clear(BTN_3);		break;
+					case 0xff04: map_key_clear(BTN_4);		break;
+					case 0xff05: map_key_clear(BTN_5);		break;
+					case 0xff06: map_key_clear(BTN_6);		break;
+					case 0xff07: map_key_clear(BTN_7);		break;
+					case 0xff08: map_key_clear(BTN_8);		break;
+					case 0xff09: map_key_clear(BTN_9);		break;
+					case 0xff0a: map_key_clear(BTN_A);		break;
+					case 0xff0b: map_key_clear(BTN_B);		break;
+					default:    goto ignore;
+				}
+			} else {
+				goto ignore;
+			}
+			break;
 
 		case HID_UP_CUSTOM: /* Reported on Logitech and Powerbook USB keyboards */
 
-- 
cgit v1.2.3-58-ga151


From defd208681b721dbf2b69347cca5302d60246405 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Sat, 19 May 2007 16:28:04 +0200
Subject: HID: force hid-input for Microsoft SideWinder GameVoice device

Microsoft SideWinder GameVoice driver is a trivial device with a few buttons
(0x09 HID usage) and an audio connector, which just forwards the audio input
into oridinary sound card present in the computer.

Despite this fact, the only interface of this device reports itself as a
Telephony/Headset type of HID device. This is apparently incorrect - the device
itself doesn't provide any audio/telephony functionality. This is achieved in
userland application which only needs to receive the button events from the HID
driver.

This patch establishes a new quirk which forces hid-input to claim a device it
will otherwise leave untouched.

Reported-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c         | 2 +-
 drivers/hid/usbhid/hid-quirks.c | 4 ++++
 include/linux/hid.h             | 1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index ce6d7644e6a1..70bf54167083 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -997,7 +997,7 @@ int hidinput_connect(struct hid_device *hid)
 			if (IS_INPUT_APPLICATION(hid->collection[i].usage))
 				break;
 
-	if (i == hid->maxcollection)
+	if (i == hid->maxcollection && (hid->quirks & HID_QUIRK_HIDINPUT) == 0)
 		return -1;
 
 	if (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS)
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index f6c4145dc202..62a7f1e9b58c 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -209,6 +209,9 @@
 #define USB_DEVICE_ID_MGE_UPS		0xffff
 #define USB_DEVICE_ID_MGE_UPS1		0x0001
 
+#define USB_VENDOR_ID_MICROSOFT		0x045e
+#define USB_DEVICE_ID_SIDEWINDER_GV	0x003b
+
 #define USB_VENDOR_ID_NEC		0x073e
 #define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
 
@@ -290,6 +293,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
 
 	{ USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM, HID_QUIRK_HIDDEV },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV, HID_QUIRK_HIDINPUT },
 
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_01, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_10, HID_QUIRK_IGNORE },
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 827ee748fd4c..6e45d1056e1b 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -276,6 +276,7 @@ struct hid_item {
 #define HID_QUIRK_DUPLICATE_USAGES		0x00200000
 #define HID_QUIRK_RESET_LEDS			0x00400000
 #define HID_QUIRK_SWAPPED_MIN_MAX		0x00800000
+#define HID_QUIRK_HIDINPUT			0x01000000
 
 /*
  * This is the global environment of the parser. This information is
-- 
cgit v1.2.3-58-ga151


From 3cd709866f639d24b0d0f38567c19662c98ea92e Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@linux01.gwdg.de>
Date: Mon, 30 Apr 2007 13:27:48 +0200
Subject: HID: Use menuconfig objects

Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/Kconfig | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 8fbe9fdac128..d96eb0865829 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1,8 +1,12 @@
 #
 # HID driver configuration
 #
-menu "HID Devices"
+menuconfig HID_SUPPORT
+	bool "HID Devices"
 	depends on INPUT
+	default y
+
+if HID_SUPPORT
 
 config HID
 	tristate "Generic HID support"
@@ -38,5 +42,4 @@ config HID_DEBUG
 
 source "drivers/hid/usbhid/Kconfig"
 
-endmenu
-
+endif # HID_SUPPORT
-- 
cgit v1.2.3-58-ga151


From 2fa45a4cffd0c4ab4e238e8ad3b4f9b0c10ac1f3 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 30 May 2007 11:11:12 -0400
Subject: USB HID: avoid flush_scheduled_work()

This patch (as914) replaces a call to flush_scheduled_work() with
cancel_work_sync(), in order to help avoid potential deadlocks.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index d91b9dac6dff..093abb5c9879 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -956,7 +956,7 @@ static void hid_disconnect(struct usb_interface *intf)
 	usb_kill_urb(usbhid->urbctrl);
 
 	del_timer_sync(&usbhid->io_retry);
-	flush_scheduled_work();
+	cancel_work_sync(&usbhid->reset_work);
 
 	if (hid->claimed & HID_CLAIMED_INPUT)
 		hidinput_disconnect(hid);
-- 
cgit v1.2.3-58-ga151


From 1b3ebe931195725cceee825c430a8bd5319c2566 Mon Sep 17 00:00:00 2001
From: Julien Eyries <jeyries@yahoo.fr>
Date: Tue, 12 Jun 2007 10:12:40 +0200
Subject: HID: support for Gameron dual psx adaptor

This patch provides support for the Gameron dual psx adaptor.  The
modification  is to add the quirk HID_QUIRK_MULTI_INPUT for this
specific USB device.

Signed-off-by: Julien Eyries <jeyries@yahoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 62a7f1e9b58c..a320c24ea6e8 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -105,6 +105,9 @@
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
+#define USB_VENDOR_ID_GAMERON		0x0810
+#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR	0x0001
+
 #define USB_VENDOR_ID_GLAB		0x06c2
 #define USB_DEVICE_ID_4_PHIDGETSERVO_30	0x0038
 #define USB_DEVICE_ID_1_PHIDGETSERVO_30	0x0039
@@ -281,6 +284,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
+	{ USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FLYING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
-- 
cgit v1.2.3-58-ga151


From 5fce620c0c7caa9e8d9588e8dcc66c52c456851a Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Tue, 12 Jun 2007 22:04:32 +0200
Subject: HID: fix mismatch between hid-input HUT find/search mapping and the
 HUT

When comparing usb vs ps2 / testing the keycodes generated for the easy access
keys on my trust (microsoft compatible) keyboard. I noticed the search key
generated the keycode for find when connected through USB. This lead me to
check the consumer page mappings in hid-input.c . And it turns out the the
mapping for ID 0x221 deviates from the HUT standard document:
http://www.usb.org/developers/devclass_docs/Hut1_12.pdf

Currently it is incorrectly mapped to find, whereas it should be mapped to
search. I also added missing bindings for ID 0x21f, the real find and for
0x222, goto.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 70bf54167083..6cb884638fda 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -598,7 +598,9 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x21b: map_key_clear(KEY_COPY);		break;
 				case 0x21c: map_key_clear(KEY_CUT);		break;
 				case 0x21d: map_key_clear(KEY_PASTE);		break;
-				case 0x221: map_key_clear(KEY_FIND);		break;
+				case 0x21f: map_key_clear(KEY_FIND);		break;
+				case 0x221: map_key_clear(KEY_SEARCH);		break;
+				case 0x222: map_key_clear(KEY_GOTO);		break;
 				case 0x223: map_key_clear(KEY_HOMEPAGE);	break;
 				case 0x224: map_key_clear(KEY_BACK);		break;
 				case 0x225: map_key_clear(KEY_FORWARD);		break;
-- 
cgit v1.2.3-58-ga151


From 92d9e6e607eb7f8f1d2a43935f45cf300cf6fdf8 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 18 Jun 2007 13:30:11 +0200
Subject: HID: support for Petalynx Maxter remote control

Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from
consumer page (reserved in HUT 1.12) for back and more keys. It also emits
a few usages from LOGIVENDOR page, which need adding.

Also, this device has broken report descriptor - the reported maximum is too
low - it doesn't contain the range for 'back' and 'more' keys, so we need to
bump it up before the report descriptor is being parsed.

Besides all this, it also requires NOGET quirk.

This patch does so.

[1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c         | 17 +++++++++++++++--
 drivers/hid/usbhid/hid-core.c   | 18 ++++++++++++++++++
 drivers/hid/usbhid/hid-quirks.c |  5 +++++
 include/linux/hid.h             |  1 +
 4 files changed, 39 insertions(+), 2 deletions(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 6cb884638fda..1b8b33341408 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -566,6 +566,11 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x0e5: map_key_clear(KEY_BASSBOOST);	break;
 				case 0x0e9: map_key_clear(KEY_VOLUMEUP);	break;
 				case 0x0ea: map_key_clear(KEY_VOLUMEDOWN);	break;
+
+				/* reserved in HUT 1.12. Reported on Petalynx remote */
+				case 0x0f6: map_key_clear(KEY_NEXT);		break;
+				case 0x0fa: map_key_clear(KEY_BACK);		break;
+
 				case 0x183: map_key_clear(KEY_CONFIG);		break;
 				case 0x184: map_key_clear(KEY_WORDPROCESSOR);	break;
 				case 0x185: map_key_clear(KEY_EDITOR);		break;
@@ -727,10 +732,10 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			}
 			break;
 
-		case HID_UP_LOGIVENDOR: /* Reported on Logitech Ultra X Media Remote */
-
+		case HID_UP_LOGIVENDOR:
 			set_bit(EV_REP, input->evbit);
 			switch(usage->hid & HID_USAGE) {
+				/* Reported on Logitech Ultra X Media Remote */
 				case 0x004: map_key_clear(KEY_AGAIN);		break;
 				case 0x00d: map_key_clear(KEY_HOME);		break;
 				case 0x024: map_key_clear(KEY_SHUFFLE);		break;
@@ -748,6 +753,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				case 0x04d: map_key_clear(KEY_SUBTITLE);	break;
 				case 0x051: map_key_clear(KEY_RED);		break;
 				case 0x052: map_key_clear(KEY_CLOSE);		break;
+
+				/* Reported on Petalynx Maxter remote */
+				case 0x05a: map_key_clear(KEY_TEXT);		break;
+				case 0x05b: map_key_clear(KEY_RED);		break;
+				case 0x05c: map_key_clear(KEY_GREEN);		break;
+				case 0x05d: map_key_clear(KEY_YELLOW);		break;
+				case 0x05e: map_key_clear(KEY_BLUE);		break;
+
 				default:    goto ignore;
 			}
 			break;
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 093abb5c9879..ef7b881aab3a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -688,6 +688,21 @@ static void hid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
 	}
 }
 
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void hid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+	if (rsize >= 60 && rdesc[39] == 0x2a
+			&& rdesc[40] == 0xf5
+			&& rdesc[41] == 0x00
+			&& rdesc[59] == 0x26
+			&& rdesc[60] == 0xf9
+			&& rdesc[61] == 0x00) {
+		info("Fixing up Petalynx Maxter Remote report descriptor");
+		rdesc[60] = 0xfa;
+		rdesc[40] = 0xfa;
+	}
+}
+
 /*
  * Some USB barcode readers from cypress have usage min and usage max in
  * the wrong order
@@ -781,6 +796,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 	if (quirks & HID_QUIRK_SWAPPED_MIN_MAX)
 		hid_fixup_cypress_descriptor(rdesc, rsize);
 
+	if (quirks & HID_QUIRK_PETALYNX_DESCRIPTOR)
+		hid_fixup_petalynx_descriptor(rdesc, rsize);
+
 #ifdef CONFIG_HID_DEBUG
 	printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
 	for (n = 0; n < rsize; n++)
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a320c24ea6e8..ad8a4ac8e43c 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -226,6 +226,9 @@
 #define USB_VENDOR_ID_PANTHERLORD	0x0810
 #define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK	0x0001
 
+#define USB_VENDOR_ID_PETALYNX		0x18b1
+#define USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE	0x0037
+
 #define USB_VENDOR_ID_PLAYDOTCOM	0x0b43
 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII	0x0003
 
@@ -426,6 +429,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 
+	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_PETALYNX_DESCRIPTOR | HID_QUIRK_NOGET },
+
 	{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
 
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 6e45d1056e1b..e41067951dd9 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -277,6 +277,7 @@ struct hid_item {
 #define HID_QUIRK_RESET_LEDS			0x00400000
 #define HID_QUIRK_SWAPPED_MIN_MAX		0x00800000
 #define HID_QUIRK_HIDINPUT			0x01000000
+#define HID_QUIRK_PETALYNX_DESCRIPTOR		0x02000000
 
 /*
  * This is the global environment of the parser. This information is
-- 
cgit v1.2.3-58-ga151


From b8e98f1c47b743e56f8ebe21006199cefd577ce5 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 18 Jun 2007 17:41:14 +0200
Subject: HID: Add NOGET quirk for all NCR devices

Devices manufactured by NCR have userspace hiddev-based drivers,
which do all the necessary device querying by themselves. The devices
must not be queried directly by the generic HID driver, as reported by
NCR engineers.

Cc: Petr Ostadal <postadal@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index ad8a4ac8e43c..a78f5187b6ef 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -215,6 +215,10 @@
 #define USB_VENDOR_ID_MICROSOFT		0x045e
 #define USB_DEVICE_ID_SIDEWINDER_GV	0x003b
 
+#define USB_VENDOR_ID_NCR		0x0404
+#define USB_DEVICE_ID_NCR_FIRST		0x0300
+#define USB_DEVICE_ID_NCR_LAST		0x03ff
+
 #define USB_VENDOR_ID_NEC		0x073e
 #define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
 
@@ -688,6 +692,12 @@ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct)
 				idProduct <= USB_DEVICE_ID_CODEMERCS_IOW_LAST)
 			return HID_QUIRK_IGNORE;
 
+	/* NCR devices must not be queried for reports */
+	if (idVendor == USB_VENDOR_ID_NCR &&
+			idProduct >= USB_DEVICE_ID_NCR_FIRST &&
+			idProduct <= USB_DEVICE_ID_NCR_LAST)
+			return HID_QUIRK_NOGET;
+
 	down_read(&dquirks_rwsem);
 	bl_entry = usbhid_exists_dquirk(idVendor, idProduct);
 	if (!bl_entry)
-- 
cgit v1.2.3-58-ga151


From ea9a4a8b0e5a34eca6613e39d21be879d92ecff5 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 19 Jun 2007 14:09:14 +0200
Subject: HID: separate quirks for report descriptor fixup

Lately there have been quite a lot of bug reports against broken devices
which require us to fix their report descriptor in the runtime, before it
is passed to the HID parser. Those devices have eaten quite an amount of
our quirks space, which isn't particularly necessary - the quirks are not
needed after the report descriptor is parsed, and they just consume bits.

Therefore this patch separates the quirks for report descriptor fixup, and
moves their handling into separate code. The quirks are then forgotten as
soon as the report descriptor has been parsed.

Module parameter 'rdesc_quirks' is introduced to be able to modify these
quirks in runtime in a similar way to 'quirks' parameter for ordinary HID
quirks.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c   |  89 +++--------------------
 drivers/hid/usbhid/hid-quirks.c | 155 +++++++++++++++++++++++++++++++++++++---
 include/linux/hid.h             |  36 ++++++----
 3 files changed, 174 insertions(+), 106 deletions(-)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ef7b881aab3a..3efc3734cec2 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -60,6 +60,12 @@ MODULE_PARM_DESC(quirks, "Add/modify USB HID quirks by specifying "
 		" quirks=vendorID:productID:quirks"
 		" where vendorID, productID, and quirks are all in"
 		" 0x-prefixed hex");
+static char *rdesc_quirks_param[MAX_USBHID_BOOT_QUIRKS] = { [ 0 ... (MAX_USBHID_BOOT_QUIRKS - 1) ] = NULL };
+module_param_array_named(rdesc_quirks, rdesc_quirks_param, charp, NULL, 0444);
+MODULE_PARM_DESC(rdesc_quirks, "Add/modify report descriptor quirks by specifying "
+		" rdesc_quirks=vendorID:productID:rdesc_quirks"
+		" where vendorID, productID, and rdesc_quirks are all in"
+		" 0x-prefixed hex");
 /*
  * Input submission and I/O error handler.
  */
@@ -632,20 +638,6 @@ static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid)
 	usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma);
 }
 
-/*
- * Cherry Cymotion keyboard have an invalid HID report descriptor,
- * that needs fixing before we can parse it.
- */
-
-static void hid_fixup_cymotion_descriptor(char *rdesc, int rsize)
-{
-	if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
-		info("Fixing up Cherry Cymotion report descriptor");
-		rdesc[11] = rdesc[16] = 0xff;
-		rdesc[12] = rdesc[17] = 0x03;
-	}
-}
-
 /*
  * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
  * to "operational".  Without this, the ps3 controller will not report any
@@ -672,61 +664,6 @@ static void hid_fixup_sony_ps3_controller(struct usb_device *dev, int ifnum)
 	kfree(buf);
 }
 
-/*
- * Certain Logitech keyboards send in report #3 keys which are far
- * above the logical maximum described in descriptor. This extends
- * the original value of 0x28c of logical maximum to 0x104d
- */
-static void hid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
-{
-	if (rsize >= 90 && rdesc[83] == 0x26
-			&& rdesc[84] == 0x8c
-			&& rdesc[85] == 0x02) {
-		info("Fixing up Logitech keyboard report descriptor");
-		rdesc[84] = rdesc[89] = 0x4d;
-		rdesc[85] = rdesc[90] = 0x10;
-	}
-}
-
-/* Petalynx Maxter Remote has maximum for consumer page set too low */
-static void hid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
-{
-	if (rsize >= 60 && rdesc[39] == 0x2a
-			&& rdesc[40] == 0xf5
-			&& rdesc[41] == 0x00
-			&& rdesc[59] == 0x26
-			&& rdesc[60] == 0xf9
-			&& rdesc[61] == 0x00) {
-		info("Fixing up Petalynx Maxter Remote report descriptor");
-		rdesc[60] = 0xfa;
-		rdesc[40] = 0xfa;
-	}
-}
-
-/*
- * Some USB barcode readers from cypress have usage min and usage max in
- * the wrong order
- */
-static void hid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
-{
-	short fixed = 0;
-	int i;
-
-	for (i = 0; i < rsize - 4; i++) {
-		if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
-			unsigned char tmp;
-
-			rdesc[i] = 0x19; rdesc[i+2] = 0x29;
-			tmp = rdesc[i+3];
-			rdesc[i+3] = rdesc[i+1];
-			rdesc[i+1] = tmp;
-		}
-	}
-
-	if (fixed)
-		info("Fixing up Cypress report descriptor");
-}
-
 static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 {
 	struct usb_host_interface *interface = intf->cur_altsetting;
@@ -787,17 +724,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 		return NULL;
 	}
 
-	if ((quirks & HID_QUIRK_CYMOTION))
-		hid_fixup_cymotion_descriptor(rdesc, rsize);
-
-	if (quirks & HID_QUIRK_LOGITECH_DESCRIPTOR)
-		hid_fixup_logitech_descriptor(rdesc, rsize);
-
-	if (quirks & HID_QUIRK_SWAPPED_MIN_MAX)
-		hid_fixup_cypress_descriptor(rdesc, rsize);
-
-	if (quirks & HID_QUIRK_PETALYNX_DESCRIPTOR)
-		hid_fixup_petalynx_descriptor(rdesc, rsize);
+	usbhid_fixup_report_descriptor(le16_to_cpu(dev->descriptor.idVendor),
+			le16_to_cpu(dev->descriptor.idProduct), rdesc,
+			rsize, rdesc_quirks_param);
 
 #ifdef CONFIG_HID_DEBUG
 	printk(KERN_DEBUG __FILE__ ": report descriptor (size %u, read %d) = ", rsize, n);
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a78f5187b6ef..a75c236fcafc 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -299,8 +299,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
 	
-	{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
-
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_DINOVO_EDGE, HID_QUIRK_DUPLICATE_USAGES },
 
 	{ USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM, HID_QUIRK_HIDDEV },
@@ -424,17 +422,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
 
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_LOGITECH_DESCRIPTOR },
-	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_LOGITECH_DESCRIPTOR },
-
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 
-	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_PETALYNX_DESCRIPTOR | HID_QUIRK_NOGET },
-
 	{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
 
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
@@ -443,6 +435,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WHEEL, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
@@ -466,8 +459,26 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
 
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_SWAPPED_MIN_MAX },
-	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_SWAPPED_MIN_MAX },
+	{ 0, 0 }
+};
+
+/* Quirks for devices which require report descriptor fixup go here */
+static const struct hid_rdesc_blacklist {
+	__u16 idVendor;
+	__u16 idProduct;
+	__u32 quirks;
+} hid_rdesc_blacklist[] = {
+
+	{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_RDESC_CYMOTION },
+
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER, HID_QUIRK_RDESC_LOGITECH },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2, HID_QUIRK_RDESC_LOGITECH },
+
+	{ USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE, HID_QUIRK_RDESC_PETALYNX },
+
+	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
+	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2, HID_QUIRK_RDESC_SWAPPED_MIN_MAX },
 
 	{ 0, 0 }
 };
@@ -576,7 +587,6 @@ int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct,
 	return 0;
 }
 
-
 /**
  * usbhid_remove_all_dquirks: remove all runtime HID quirks from memory
  *
@@ -709,3 +719,126 @@ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct)
 	return quirks;
 }
 
+/*
+ * Cherry Cymotion keyboard have an invalid HID report descriptor,
+ * that needs fixing before we can parse it.
+ */
+static void usbhid_fixup_cymotion_descriptor(char *rdesc, int rsize)
+{
+	if (rsize >= 17 && rdesc[11] == 0x3c && rdesc[12] == 0x02) {
+		printk(KERN_INFO "Fixing up Cherry Cymotion report descriptor\n");
+		rdesc[11] = rdesc[16] = 0xff;
+		rdesc[12] = rdesc[17] = 0x03;
+	}
+}
+
+
+/*
+ * Certain Logitech keyboards send in report #3 keys which are far
+ * above the logical maximum described in descriptor. This extends
+ * the original value of 0x28c of logical maximum to 0x104d
+ */
+static void usbhid_fixup_logitech_descriptor(unsigned char *rdesc, int rsize)
+{
+	if (rsize >= 90 && rdesc[83] == 0x26
+			&& rdesc[84] == 0x8c
+			&& rdesc[85] == 0x02) {
+		printk(KERN_INFO "Fixing up Logitech keyboard report descriptor\n");
+		rdesc[84] = rdesc[89] = 0x4d;
+		rdesc[85] = rdesc[90] = 0x10;
+	}
+}
+
+/* Petalynx Maxter Remote has maximum for consumer page set too low */
+static void usbhid_fixup_petalynx_descriptor(unsigned char *rdesc, int rsize)
+{
+	if (rsize >= 60 && rdesc[39] == 0x2a
+			&& rdesc[40] == 0xf5
+			&& rdesc[41] == 0x00
+			&& rdesc[59] == 0x26
+			&& rdesc[60] == 0xf9
+			&& rdesc[61] == 0x00) {
+		printk(KERN_INFO "Fixing up Petalynx Maxter Remote report descriptor\n");
+		rdesc[60] = 0xfa;
+		rdesc[40] = 0xfa;
+	}
+}
+
+/*
+ * Some USB barcode readers from cypress have usage min and usage max in
+ * the wrong order
+ */
+static void usbhid_fixup_cypress_descriptor(unsigned char *rdesc, int rsize)
+{
+	short fixed = 0;
+	int i;
+
+	for (i = 0; i < rsize - 4; i++) {
+		if (rdesc[i] == 0x29 && rdesc [i+2] == 0x19) {
+			unsigned char tmp;
+
+			rdesc[i] = 0x19; rdesc[i+2] = 0x29;
+			tmp = rdesc[i+3];
+			rdesc[i+3] = rdesc[i+1];
+			rdesc[i+1] = tmp;
+		}
+	}
+
+	if (fixed)
+		printk(KERN_INFO "Fixing up Cypress report descriptor\n");
+}
+
+
+static void __usbhid_fixup_report_descriptor(__u32 quirks, char *rdesc, unsigned rsize)
+{
+	if ((quirks & HID_QUIRK_RDESC_CYMOTION))
+		usbhid_fixup_cymotion_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_LOGITECH)
+		usbhid_fixup_logitech_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_SWAPPED_MIN_MAX)
+		usbhid_fixup_cypress_descriptor(rdesc, rsize);
+
+	if (quirks & HID_QUIRK_RDESC_PETALYNX)
+		usbhid_fixup_petalynx_descriptor(rdesc, rsize);
+}
+
+/**
+ * usbhid_fixup_report_descriptor: check if report descriptor needs fixup
+ *
+ * Description:
+ *	Walks the hid_rdesc_blacklist[] array and checks whether the device
+ *	is known to have broken report descriptor that needs to be fixed up
+ *	prior to entering the HID parser
+ *
+ * Returns: nothing
+ */
+void usbhid_fixup_report_descriptor(const u16 idVendor, const u16 idProduct,
+				    char *rdesc, unsigned rsize, char **quirks_param)
+{
+	int n, m;
+	u16 paramVendor, paramProduct;
+	u32 quirks;
+
+	/* static rdesc quirk entries */
+	for (n = 0; hid_rdesc_blacklist[n].idVendor; n++)
+		if (hid_rdesc_blacklist[n].idVendor == idVendor &&
+				hid_rdesc_blacklist[n].idProduct == idProduct)
+			__usbhid_fixup_report_descriptor(hid_rdesc_blacklist[n].quirks,
+					rdesc, rsize);
+
+	/* runtime rdesc quirk entries handling */
+	for (n = 0; quirks_param[n] && n < MAX_USBHID_BOOT_QUIRKS; n++) {
+		m = sscanf(quirks_param[n], "0x%hx:0x%hx:0x%x",
+				&paramVendor, &paramProduct, &quirks);
+
+		if (m != 3)
+			printk(KERN_WARNING
+				"Could not parse HID quirk module param %s\n",
+				quirks_param[n]);
+		else if (paramVendor == idVendor && paramProduct == idProduct)
+			__usbhid_fixup_report_descriptor(quirks, rdesc, rsize);
+	}
+
+}
diff --git a/include/linux/hid.h b/include/linux/hid.h
index e41067951dd9..4daf5eea78a1 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -263,21 +263,26 @@ struct hid_item {
 #define HID_QUIRK_2WHEEL_MOUSE_HACK_5		0x00000100
 #define HID_QUIRK_2WHEEL_MOUSE_HACK_ON		0x00000200
 #define HID_QUIRK_MIGHTYMOUSE			0x00000400
-#define HID_QUIRK_CYMOTION			0x00000800
-#define HID_QUIRK_POWERBOOK_HAS_FN		0x00001000
-#define HID_QUIRK_POWERBOOK_FN_ON		0x00002000
-#define HID_QUIRK_INVERT_HWHEEL			0x00004000
-#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD        0x00008000
-#define HID_QUIRK_BAD_RELATIVE_KEYS		0x00010000
-#define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00020000
-#define HID_QUIRK_IGNORE_MOUSE			0x00040000
-#define HID_QUIRK_SONY_PS3_CONTROLLER		0x00080000
-#define HID_QUIRK_LOGITECH_DESCRIPTOR		0x00100000
-#define HID_QUIRK_DUPLICATE_USAGES		0x00200000
-#define HID_QUIRK_RESET_LEDS			0x00400000
-#define HID_QUIRK_SWAPPED_MIN_MAX		0x00800000
-#define HID_QUIRK_HIDINPUT			0x01000000
-#define HID_QUIRK_PETALYNX_DESCRIPTOR		0x02000000
+#define HID_QUIRK_POWERBOOK_HAS_FN		0x00000800
+#define HID_QUIRK_POWERBOOK_FN_ON		0x00001000
+#define HID_QUIRK_INVERT_HWHEEL			0x00002000
+#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD        0x00004000
+#define HID_QUIRK_BAD_RELATIVE_KEYS		0x00008000
+#define HID_QUIRK_SKIP_OUTPUT_REPORTS		0x00010000
+#define HID_QUIRK_IGNORE_MOUSE			0x00020000
+#define HID_QUIRK_SONY_PS3_CONTROLLER		0x00040000
+#define HID_QUIRK_DUPLICATE_USAGES		0x00080000
+#define HID_QUIRK_RESET_LEDS			0x00100000
+#define HID_QUIRK_HIDINPUT			0x00200000
+
+/*
+ * Separate quirks for runtime report descriptor fixup
+ */
+
+#define HID_QUIRK_RDESC_CYMOTION		0x00000001
+#define HID_QUIRK_RDESC_LOGITECH		0x00000002
+#define HID_QUIRK_RDESC_SWAPPED_MIN_MAX		0x00000004
+#define HID_QUIRK_RDESC_PETALYNX		0x00000008
 
 /*
  * This is the global environment of the parser. This information is
@@ -508,6 +513,7 @@ u32 usbhid_lookup_quirk(const u16 idVendor, const u16 idProduct);
 int usbhid_modify_dquirk(const u16 idVendor, const u16 idProduct, const u32 quirks);
 int usbhid_quirks_init(char **quirks_param);
 void usbhid_quirks_exit(void);
+void usbhid_fixup_report_descriptor(const u16, const u16, char *, unsigned, char **);
 
 #ifdef CONFIG_HID_FF
 int hid_ff_init(struct hid_device *hid);
-- 
cgit v1.2.3-58-ga151


From 816cbfda8b5113629707f604660204701e93b7ce Mon Sep 17 00:00:00 2001
From: Diogo Kastrup <dk@bighost.com.br>
Date: Tue, 19 Jun 2007 14:16:15 +0200
Subject: HID: fix autocentering of PID devices

When setting the autocentering of PID devices, PID_DIRECTION_ENABLE is not
being explicitely set to 1. This results in autocentering working only on the
vertical axis when this field is preset to 0.

Fix that by setting it explicitely to 1 when preparing the set_effect report
for autocentering spring effect.

Signed-off-by: Diogo Kastrup <dk@bighost.com.br>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-pidff.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c
index f5a90e950e6b..011326178c06 100644
--- a/drivers/hid/usbhid/hid-pidff.c
+++ b/drivers/hid/usbhid/hid-pidff.c
@@ -738,6 +738,7 @@ static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude)
 	pidff->set_effect[PID_TRIGGER_BUTTON].value[0] = 0;
 	pidff->set_effect[PID_TRIGGER_REPEAT_INT].value[0] = 0;
 	pidff_set(&pidff->set_effect[PID_GAIN], magnitude);
+	pidff->set_effect[PID_DIRECTION_ENABLE].value[0] = 1;
 	pidff->set_effect[PID_START_DELAY].value[0] = 0;
 
 	usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT],
-- 
cgit v1.2.3-58-ga151


From 5f9c464aaa1ba3a773c47004e98eb1f3aa2ab2a4 Mon Sep 17 00:00:00 2001
From: Ryo Dairiki <ryo-dairiki@users.sourceforge.net>
Date: Mon, 25 Jun 2007 10:31:12 +0200
Subject: HID: support for logitech cordless desktop LX500 special mapping

This keyboard has wireless mouse which has left, middle, right buttons and
2-dimensional scrolling wheel.  Unfornetuly, this wheel reports side scrolling
events and 11 or 12 button events at the same time.

I've wrote a patch to fix this mapping.  I'm not sure if this mapping is proper
for buttons, because , for example, there is no entry for "burn cd" in input.h.

The patch also supress 11 and 12 button events from mouse when you scroll the
wheel left and right.  With this patch, only side scrolling events are
reported.  (This mouse has only 4 buttons and 2D wheel. There is no such
buttons like 11 and 12.)

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c         | 28 ++++++++++++++++++++++++++++
 drivers/hid/usbhid/hid-quirks.c |  3 +++
 include/linux/hid.h             |  2 ++
 3 files changed, 33 insertions(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 1b8b33341408..60de16a83c3e 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -60,6 +60,19 @@ static const unsigned char hid_keyboard[256] = {
 	150,158,159,128,136,177,178,176,142,152,173,140,unk,unk,unk,unk
 };
 
+/* extended mapping for certain Logitech hardware (Logitech cordless desktop LX500) */
+#define LOGITECH_EXPANDED_KEYMAP_SIZE 80
+static int logitech_expanded_keymap[LOGITECH_EXPANDED_KEYMAP_SIZE] = {
+	  0,216,  0,213,175,156,  0,  0,  0,  0,
+	144,  0,  0,  0,  0,  0,  0,  0,  0,212,
+	174,167,152,161,112,  0,  0,  0,154,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+	  0,  0,  0,  0,  0,183,184,185,186,187,
+	188,189,190,191,192,193,194,  0,  0,  0
+};
+
 static const struct {
 	__s32 x;
 	__s32 y;
@@ -378,6 +391,21 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 					}
 			}
 
+			/* Special handling for Logitech Cordless Desktop */
+			if (field->application != HID_GD_MOUSE) {
+				if (device->quirks & HID_QUIRK_LOGITECH_EXPANDED_KEYMAP) {
+					int hid = usage->hid & HID_USAGE;
+					if (hid < LOGITECH_EXPANDED_KEYMAP_SIZE && logitech_expanded_keymap[hid] != 0)
+						code = logitech_expanded_keymap[hid];
+				}
+			} else {
+				if (device->quirks & HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL) {
+					int hid = usage->hid & HID_USAGE;
+					if (hid == 7 || hid == 8)
+						goto ignore;
+				}
+			}
+
 			map_key(code);
 			break;
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index a75c236fcafc..5614a70f564f 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -201,6 +201,7 @@
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
 #define USB_DEVICE_ID_S510_RECEIVER	0xc50c
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
+#define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500	0xc512
 #define USB_DEVICE_ID_MX3000_RECEIVER	0xc513
 #define USB_DEVICE_ID_DINOVO_EDGE	0xc714
 
@@ -422,6 +423,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
 
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
+
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE, HID_QUIRK_MIGHTYMOUSE | HID_QUIRK_INVERT_HWHEEL },
 
 	{ USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 4daf5eea78a1..44b64f0d0555 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -274,6 +274,8 @@ struct hid_item {
 #define HID_QUIRK_DUPLICATE_USAGES		0x00080000
 #define HID_QUIRK_RESET_LEDS			0x00100000
 #define HID_QUIRK_HIDINPUT			0x00200000
+#define HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL	0x00400000
+#define HID_QUIRK_LOGITECH_EXPANDED_KEYMAP	0x00800000
 
 /*
  * Separate quirks for runtime report descriptor fixup
-- 
cgit v1.2.3-58-ga151


From 3c5f4b25f3552c9bcb52eb956753a3c8140480b7 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Thu, 28 Jun 2007 22:33:47 +0200
Subject: HID: Logitech keyboard 0xc311 needs reset leds quirk

The keyboard 0x046d/0xc311 needs reset leds quirk

Tested-by: Antonino Ingargiola <tritemio@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 5614a70f564f..ce6c970b5979 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -199,6 +199,7 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
+#define USB_DEVICE_ID_LOGITECH_KBD	0xc311
 #define USB_DEVICE_ID_S510_RECEIVER	0xc50c
 #define USB_DEVICE_ID_S510_RECEIVER_2	0xc517
 #define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500	0xc512
@@ -461,6 +462,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
 
 	{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
 
 	{ 0, 0 }
 };
-- 
cgit v1.2.3-58-ga151


From 2c1d8aea2ca76df1b1de2aed23e3ceda2a044ed1 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Wed, 4 Jul 2007 16:45:59 +0200
Subject: HID: handle cases of volume knobs generating relative values

There are some devices (for example Dell Multimedia Keyboard SK-8135) that have
a volume control knob which generates relative events instead of absolute.
hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute
values.

Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This
patch translates relative ABS_VOLUME events into appropriate number of series
of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the
correct values in the end.

kernel.org bugzilla 5233

Reported-by: Jochen Eisinger <jochen@penguin-breeder.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-input.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'drivers/hid')

diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 60de16a83c3e..bf7e307503cc 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -882,6 +882,16 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 			field->dpad = usage->code;
 	}
 
+	/* for those devices which produce Consumer volume usage as relative,
+	 * we emulate pressing volumeup/volumedown appropriate number of times
+	 * in hidinput_hid_event()
+	 */
+	if ((usage->type == EV_ABS) && (field->flags & HID_MAIN_ITEM_RELATIVE) &&
+			(usage->code == ABS_VOLUME)) {
+		set_bit(KEY_VOLUMEUP, input->keybit);
+		set_bit(KEY_VOLUMEDOWN, input->keybit);
+	}
+
 	hid_resolv_event(usage->type, usage->code);
 #ifdef CONFIG_HID_DEBUG
 	printk("\n");
@@ -972,6 +982,21 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 	if ((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */
 		return;
 
+	if ((usage->type == EV_ABS) && (field->flags & HID_MAIN_ITEM_RELATIVE) &&
+			(usage->code == ABS_VOLUME)) {
+		int count = abs(value);
+		int direction = value > 0 ? KEY_VOLUMEUP : KEY_VOLUMEDOWN;
+		int i;
+
+		for (i = 0; i < count; i++) {
+			input_event(input, EV_KEY, direction, 1);
+			input_sync(input);
+			input_event(input, EV_KEY, direction, 0);
+			input_sync(input);
+		}
+		return;
+	}
+
 	input_event(input, usage->type, usage->code, value);
 
 	if ((field->flags & HID_MAIN_ITEM_RELATIVE) && (usage->type == EV_KEY))
-- 
cgit v1.2.3-58-ga151