From d553e2ab0137ae489b41824b1e8283053c363ed1 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 8 Dec 2020 11:04:26 +0200 Subject: dmaengine: ti: k3-udma-glue: Configure the dma_dev for rings Rings in RING mode should be using the DMA device for DMA API as in this mode the ringacc will not access the ring memory in any ways, but the DMA is. Fix up the ring configuration and set the dma_dev unconditionally and let the ringacc driver to select the correct device to use for DMA API. Signed-off-by: Peter Ujfalusi Reviewed-by: Grygorii Strashko Link: https://lore.kernel.org/r/20201208090440.31792-7-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul --- drivers/dma/ti/k3-udma-glue.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/dma/ti/k3-udma-glue.c') diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c index 8a8988be4175..e6ebcd98c02a 100644 --- a/drivers/dma/ti/k3-udma-glue.c +++ b/drivers/dma/ti/k3-udma-glue.c @@ -276,6 +276,10 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, goto err; } + /* Set the dma_dev for the rings to be configured */ + cfg->tx_cfg.dma_dev = k3_udma_glue_tx_get_dma_device(tx_chn); + cfg->txcq_cfg.dma_dev = cfg->tx_cfg.dma_dev; + ret = k3_ringacc_ring_cfg(tx_chn->ringtx, &cfg->tx_cfg); if (ret) { dev_err(dev, "Failed to cfg ringtx %d\n", ret); @@ -591,6 +595,10 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn, goto err_rflow_put; } + /* Set the dma_dev for the rings to be configured */ + flow_cfg->rx_cfg.dma_dev = k3_udma_glue_rx_get_dma_device(rx_chn); + flow_cfg->rxfdq_cfg.dma_dev = flow_cfg->rx_cfg.dma_dev; + ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg); if (ret) { dev_err(dev, "Failed to cfg ringrx %d\n", ret); -- cgit v1.2.3-58-ga151