From 706546d02384b64e083bd9130c56eaa599c66038 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 9 Jun 2008 16:22:23 -0700 Subject: ACPI: change processors from array to per_cpu variable Change processors from an array sized by NR_CPUS to a per_cpu variable. Signed-off-by: Mike Travis Signed-off-by: Andrew Morton Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_throttling.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/acpi/processor_throttling.c') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index bb06738860c4..8728782aad3b 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -71,7 +71,7 @@ static int acpi_processor_update_tsd_coord(void) * coordination between all CPUs. */ for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -93,7 +93,7 @@ static int acpi_processor_update_tsd_coord(void) cpus_clear(covered_cpus); for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -119,7 +119,7 @@ static int acpi_processor_update_tsd_coord(void) if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -152,7 +152,7 @@ static int acpi_processor_update_tsd_coord(void) if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -172,7 +172,7 @@ static int acpi_processor_update_tsd_coord(void) err_ret: for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -214,7 +214,7 @@ static int acpi_processor_throttling_notifier(unsigned long event, void *data) struct acpi_processor_throttling *p_throttling; cpu = p_tstate->cpu; - pr = processors[cpu]; + pr = per_cpu(processors, cpu); if (!pr) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); return 0; @@ -1035,7 +1035,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) * cpus. */ for_each_cpu_mask(i, online_throttling_cpus) { - match_pr = processors[i]; + match_pr = per_cpu(processors, i); /* * If the pointer is invalid, we will report the * error message and continue. -- cgit v1.2.3-58-ga151 From 3d532d5e3882c1387a2722df2a368c4a9224b12f Mon Sep 17 00:00:00 2001 From: Yi Yang Date: Sat, 14 Jun 2008 00:54:37 -0400 Subject: ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_throttling.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) (limited to 'drivers/acpi/processor_throttling.c') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 8728782aad3b..53345dbc5027 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1232,7 +1232,10 @@ static ssize_t acpi_processor_write_throttling(struct file *file, int result = 0; struct seq_file *m = file->private_data; struct acpi_processor *pr = m->private; - char state_string[12] = { '\0' }; + char state_string[5] = ""; + char *charp = NULL; + size_t state_val = 0; + char tmpbuf[5] = ""; if (!pr || (count > sizeof(state_string) - 1)) return -EINVAL; @@ -1241,10 +1244,23 @@ static ssize_t acpi_processor_write_throttling(struct file *file, return -EFAULT; state_string[count] = '\0'; + if ((count > 0) && (state_string[count-1] == '\n')) + state_string[count-1] = '\0'; - result = acpi_processor_set_throttling(pr, - simple_strtoul(state_string, - NULL, 0)); + charp = state_string; + if ((state_string[0] == 't') || (state_string[0] == 'T')) + charp++; + + state_val = simple_strtoul(charp, NULL, 0); + if (state_val >= pr->throttling.state_count) + return -EINVAL; + + snprintf(tmpbuf, 5, "%d", state_val); + + if (strcmp(tmpbuf, charp) != 0) + return -EINVAL; + + result = acpi_processor_set_throttling(pr, state_val); if (result) return result; -- cgit v1.2.3-58-ga151 From 12b2b34e240a24bdbb2fdacf26a54b24ebf1ed81 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Jun 2008 09:43:41 -0700 Subject: acpi: fix printk format warning Fix printk format warning: linux-next-20080617/drivers/acpi/processor_throttling.c:1258: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/acpi/processor_throttling.c') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 53345dbc5027..0622ace05220 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1255,7 +1255,7 @@ static ssize_t acpi_processor_write_throttling(struct file *file, if (state_val >= pr->throttling.state_count) return -EINVAL; - snprintf(tmpbuf, 5, "%d", state_val); + snprintf(tmpbuf, 5, "%zu", state_val); if (strcmp(tmpbuf, charp) != 0) return -EINVAL; -- cgit v1.2.3-58-ga151