From c12abc012e18b362204345c323536f228d65c4db Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 7 Aug 2009 09:59:47 +0300 Subject: ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of omap_mcbsp_start/stop Simultaneous audio playback and capture on OMAP1510 can cause that second stream is stalled if there is enough delay between startup of the audio streams. Current implementation of the omap_mcbsp_start is starting both transmitter and receiver at the same time and it is called only for firstly started audio stream from the OMAP McBSP based ASoC DAI driver. Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is missed if there is no DMA transfer set up at that time when the first word after McBSP startup is transmitted. The problem hasn't noted before since later OMAPs are using level sensitive DMA request lines. Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by allowing to start and stop individually McBSP transmitter and receiver logics. Then call those functions individually for both audio playback and capture streams. This ensures that DMA transfer is setup before transmitter or receiver is started. Thanks to Janusz Krzysztofik for detailed problem analysis and Peter Ujfalusi for info about DMA request line behavior differences between the OMAP generations. Reported-and-tested-by: Janusz Krzysztofik Signed-off-by: Jarkko Nikula Acked-by: Tony Lindgren Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 4 +-- arch/arm/plat-omap/mcbsp.c | 50 +++++++++++++++++++++------------ 2 files changed, 34 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index bb154ea76769..57249bb1e9bc 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -387,8 +387,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id); -void omap_mcbsp_stop(unsigned int id); +void omap_mcbsp_start(unsigned int id, int tx, int rx); +void omap_mcbsp_stop(unsigned int id, int tx, int rx); void omap_mcbsp_xmit_word(unsigned int id, u32 word); u32 omap_mcbsp_recv_word(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index efa0e0111f38..a3d2313460b3 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -328,14 +328,15 @@ void omap_mcbsp_free(unsigned int id) EXPORT_SYMBOL(omap_mcbsp_free); /* - * Here we start the McBSP, by enabling the sample - * generator, both transmitter and receivers, - * and the frame sync. + * Here we start the McBSP, by enabling transmitter, receiver or both. + * If no transmitter or receiver is active prior calling, then sample-rate + * generator and frame sync are started. */ -void omap_mcbsp_start(unsigned int id) +void omap_mcbsp_start(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; void __iomem *io_base; + int idle; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -348,32 +349,40 @@ void omap_mcbsp_start(unsigned int id) mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7; mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7; - /* Start the sample generator */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); + idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | + OMAP_MCBSP_READ(io_base, SPCR1)) & 1); + + if (idle) { + /* Start the sample generator */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); + } /* Enable transmitter and receiver */ w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1)); w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1); + OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1)); udelay(100); - /* Start frame sync */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); + if (idle) { + /* Start frame sync */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); + } /* Dump McBSP Regs */ omap_mcbsp_dump_reg(id); } EXPORT_SYMBOL(omap_mcbsp_start); -void omap_mcbsp_stop(unsigned int id) +void omap_mcbsp_stop(unsigned int id, int tx, int rx) { struct omap_mcbsp *mcbsp; void __iomem *io_base; + int idle; u16 w; if (!omap_mcbsp_check_valid_id(id)) { @@ -386,15 +395,20 @@ void omap_mcbsp_stop(unsigned int id) /* Reset transmitter */ w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1)); + OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1)); /* Reset receiver */ w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1)); + OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1)); - /* Reset the sample rate generator */ - w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); + idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | + OMAP_MCBSP_READ(io_base, SPCR1)) & 1); + + if (idle) { + /* Reset the sample rate generator */ + w = OMAP_MCBSP_READ(io_base, SPCR2); + OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); + } } EXPORT_SYMBOL(omap_mcbsp_stop); -- cgit v1.2.3-58-ga151 From 4ac0478f2afaf8e778b4190d6218459a9dbf2a8f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 30 Jul 2009 02:55:01 +0200 Subject: ALSA: Allow passing platform_data for pxa2xx-ac97 This patch adds support for passing platform data to ac97 bus devices from PXA2xx-AC97 driver.. Signed-off-by: Marek Vasut Signed-off-by: Mark Brown --- arch/arm/mach-pxa/include/mach/audio.h | 3 +++ include/sound/ac97_codec.h | 3 +++ sound/arm/pxa2xx-ac97.c | 10 ++++++++++ sound/soc/pxa/pxa2xx-ac97.c | 12 +++++++++++- 4 files changed, 27 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index 16eb02552d5d..a3449e35a6f5 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -3,10 +3,12 @@ #include #include +#include /* * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) * a -1 value means no gpio will be used for reset + * @codec_pdata: AC97 codec platform_data * reset_gpio should only be specified for pxa27x CPUs where a silicon * bug prevents correct operation of the reset line. If not specified, @@ -20,6 +22,7 @@ typedef struct { void (*resume)(void *); void *priv; int reset_gpio; + void *codec_pdata[AC97_BUS_MAX_DEVICES]; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 9b1c0985480c..3dae3f799b9b 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -32,6 +32,9 @@ #include "control.h" #include "info.h" +/* maximum number of devices on the AC97 bus */ +#define AC97_BUS_MAX_DEVICES 4 + /* * AC'97 codec registers */ diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index c570ebd9d177..6c00ea45d5cb 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -170,6 +170,13 @@ static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) struct snd_ac97_bus *ac97_bus; struct snd_ac97_template ac97_template; int ret; + pxa2xx_audio_ops_t *pdata = dev->dev.platform_data; + + if (dev->id >= 0) { + dev_err(&dev->dev, "PXA2xx has only one AC97 port.\n"); + ret = -ENXIO; + goto err_dev; + } ret = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, THIS_MODULE, 0, &card); @@ -200,6 +207,8 @@ static int __devinit pxa2xx_ac97_probe(struct platform_device *dev) snprintf(card->longname, sizeof(card->longname), "%s (%s)", dev->dev.driver->name, card->mixername); + if (pdata && pdata->codec_data) + snd_ac97_dev_add_pdata(ac97_bus->codec[0], pdata->codec_pdata); snd_card_set_dev(card, &dev->dev); ret = snd_card_register(card); if (ret == 0) { @@ -212,6 +221,7 @@ err_remove: err: if (card) snd_card_free(card); +err_dev: return ret; } diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index d9c94d71fa61..7330e5c5b9df 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -22,6 +22,7 @@ #include #include #include +#include #include "pxa2xx-pcm.h" #include "pxa2xx-ac97.h" @@ -241,9 +242,18 @@ EXPORT_SYMBOL_GPL(soc_ac97_ops); static int __devinit pxa2xx_ac97_dev_probe(struct platform_device *pdev) { int i; + pxa2xx_audio_ops_t *pdata = pdev->dev.platform_data; - for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++) + if (pdev->id >= 0) { + dev_err(&pdev->dev, "PXA2xx has only one AC97 port.\n"); + return -ENXIO; + } + + for (i = 0; i < ARRAY_SIZE(pxa_ac97_dai); i++) { pxa_ac97_dai[i].dev = &pdev->dev; + if (pdata && pdata->codec_pdata) + pxa_ac97_dai[i].ac97_pdata = pdata->codec_pdata; + } /* Punt most of the init to the SoC probe; we may need the machine * driver to do interesting things with the clocking to get us up -- cgit v1.2.3-58-ga151 From 0914b93f4f36d1a0233bd64da9a35e37e72304ec Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Tue, 18 Aug 2009 21:56:19 +0900 Subject: ASoC: Fix data format configuration for S3C64XX IISv2 The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD register. This patch changes to the defined values it. And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14. Signed-off-by: Joonyoung Shim Signed-off-by: Mark Brown --- arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 5 +++++ sound/soc/s3c24xx/s3c-i2s-v2.c | 6 +++--- 2 files changed, 8 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h index 0fad7571030e..07659dad1748 100644 --- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h +++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h @@ -33,6 +33,11 @@ #define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) #define S3C2412_IISCON_IIS_ACTIVE (1 << 0) +#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) +#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) +#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) +#define S3C64XX_IISMOD_BLC_MASK (3 << 13) + #define S3C64XX_IISMOD_IMS_PCLK (0 << 10) #define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c index 1a283170ca92..ebfb2f631054 100644 --- a/sound/soc/s3c24xx/s3c-i2s-v2.c +++ b/sound/soc/s3c24xx/s3c-i2s-v2.c @@ -357,19 +357,19 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream, #endif #ifdef CONFIG_PLAT_S3C64XX - iismod &= ~0x606; + iismod &= ~(S3C64XX_IISMOD_BLC_MASK | S3C2412_IISMOD_BCLK_MASK); /* Sample size */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S8: /* 8 bit sample, 16fs BCLK */ - iismod |= 0x2004; + iismod |= (S3C64XX_IISMOD_BLC_8BIT | S3C2412_IISMOD_BCLK_16FS); break; case SNDRV_PCM_FORMAT_S16_LE: /* 16 bit sample, 32fs BCLK */ break; case SNDRV_PCM_FORMAT_S24_LE: /* 24 bit sample, 48fs BCLK */ - iismod |= 0x4002; + iismod |= (S3C64XX_IISMOD_BLC_24BIT | S3C2412_IISMOD_BCLK_48FS); break; } #endif -- cgit v1.2.3-58-ga151 From 9abea08e43c6cfc18399e42cbc6028d111532f61 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Thu, 20 Aug 2009 16:18:07 +0300 Subject: OMAP: McBSP: Provide functions for ASoC frame syncronization ASoC has an annoying bug letting either L or R channel to be played on L channel. In other words, L and R channels can switch at random. This provides McBSP funtionality that may be used to fix this feature. Signed-off-by: Eero Nurkkala Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 2 ++ arch/arm/plat-omap/mcbsp.c | 52 +++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 57249bb1e9bc..b85e6e600ed6 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -389,6 +389,8 @@ int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); +void omap_mcbsp_xmit_enable(unsigned int id, u8 enable); +void omap_mcbsp_recv_enable(unsigned int id, u8 enable); void omap_mcbsp_xmit_word(unsigned int id, u32 word); u32 omap_mcbsp_recv_word(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index a3d2313460b3..0aa2524186fb 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -412,6 +412,58 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) } EXPORT_SYMBOL(omap_mcbsp_stop); +void omap_mcbsp_xmit_enable(unsigned int id, u8 enable) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + u16 w; + + if (!(cpu_is_omap2430() || cpu_is_omap34xx())) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + w = OMAP_MCBSP_READ(io_base, XCCR); + + if (enable) + OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE)); + else + OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE); +} +EXPORT_SYMBOL(omap_mcbsp_xmit_enable); + +void omap_mcbsp_recv_enable(unsigned int id, u8 enable) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + u16 w; + + if (!(cpu_is_omap2430() || cpu_is_omap34xx())) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + w = OMAP_MCBSP_READ(io_base, RCCR); + + if (enable) + OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE)); + else + OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE); +} +EXPORT_SYMBOL(omap_mcbsp_recv_enable); + /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { -- cgit v1.2.3-58-ga151 From 946a49a95dabc9dd10344ae9ab4db9f14c5ad502 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:08 +0300 Subject: OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers. Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index b85e6e600ed6..ceaf9eee61b9 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -134,6 +134,10 @@ #define OMAP_MCBSP_REG_XCERG 0x74 #define OMAP_MCBSP_REG_XCERH 0x78 #define OMAP_MCBSP_REG_SYSCON 0x8C +#define OMAP_MCBSP_REG_THRSH2 0x90 +#define OMAP_MCBSP_REG_THRSH1 0x94 +#define OMAP_MCBSP_REG_IRQST 0xA0 +#define OMAP_MCBSP_REG_IRQEN 0xA4 #define OMAP_MCBSP_REG_XCCR 0xAC #define OMAP_MCBSP_REG_RCCR 0xB0 -- cgit v1.2.3-58-ga151 From 44a6311c0a83f682bcf18fae389a1b270df29314 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:09 +0300 Subject: OMAP: McBSP: Use appropriate value for startup delay Increasing startup delay value as worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec Although, 100us may give enough time for two CLKSRG, due to some unknown PM related, clock gating etc. reason, this patch increases it to 500us. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 0aa2524186fb..e9dd70320f7d 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -365,7 +365,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) w = OMAP_MCBSP_READ(io_base, SPCR1); OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1)); - udelay(100); + /* + * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec + * REVISIT: 100us may give enough time for two CLKSRG, however + * due to some unknown PM related, clock gating etc. reason it + * is now at 500us. + */ + udelay(500); if (idle) { /* Start frame sync */ -- cgit v1.2.3-58-ga151 From 7aa9ff56cae7a6a4fa2e1a503cc5f8bbd887d6e3 Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:10 +0300 Subject: OMAP: McBSP: Add transmit/receive threshold handler This patch adds a way to handle transmit/receive threshold. It export to mcbsp users a callback registration procedure. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 9 ++++++ arch/arm/plat-omap/mcbsp.c | 50 +++++++++++++++++++++++++++++++++ 2 files changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index ceaf9eee61b9..2544aa5bccd3 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -389,6 +389,15 @@ int omap_mcbsp_init(void); void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, int size); void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); +#ifdef CONFIG_ARCH_OMAP34XX +void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); +void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); +#else +static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) +{ } +static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) +{ } +#endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e9dd70320f7d..081f2eace92d 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -198,6 +198,56 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) } EXPORT_SYMBOL(omap_mcbsp_config); +#ifdef CONFIG_ARCH_OMAP34XX +/* + * omap_mcbsp_set_tx_threshold configures how to deal + * with transmit threshold. the threshold value and handler can be + * configure in here. + */ +void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + + if (!cpu_is_omap34xx()) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + OMAP_MCBSP_WRITE(io_base, THRSH2, threshold); +} +EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); + +/* + * omap_mcbsp_set_rx_threshold configures how to deal + * with receive threshold. the threshold value and handler can be + * configure in here. + */ +void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) +{ + struct omap_mcbsp *mcbsp; + void __iomem *io_base; + + if (!cpu_is_omap34xx()) + return; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return; + } + mcbsp = id_to_mcbsp_ptr(id); + io_base = mcbsp->io_base; + + OMAP_MCBSP_WRITE(io_base, THRSH1, threshold); +} +EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); +#endif + /* * We can choose between IRQ based or polled IO. * This needs to be called before omap_mcbsp_request(). -- cgit v1.2.3-58-ga151 From a1a56f5faa41327116bf960a8e79f21a8ea35dce Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:11 +0300 Subject: OMAP: McBSP: Create and export max_(r|t)x_thres property This patch export through sysfs two properties to configure maximum threshold for transmission and reception on each mcbsp instance. Also, it exports two helper functions to allow mcbsp users to read this values. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/mach-omap2/mcbsp.c | 5 ++ arch/arm/plat-omap/include/mach/mcbsp.h | 11 +++ arch/arm/plat-omap/mcbsp.c | 122 ++++++++++++++++++++++++++++++++ 3 files changed, 138 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index a5c0f0435cd6..f837114d1d69 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -129,6 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x7F, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -137,6 +138,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP2_IRQ_RX, .tx_irq = INT_24XX_MCBSP2_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x3FF, }, { .phys_base = OMAP34XX_MCBSP3_BASE, @@ -145,6 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x7F, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -153,6 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x7F, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -161,6 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, + .buffer_size = 0x7F, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 2544aa5bccd3..832330d7cb39 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -348,6 +348,9 @@ struct omap_mcbsp_platform_data { u8 dma_rx_sync, dma_tx_sync; u16 rx_irq, tx_irq; struct omap_mcbsp_ops *ops; +#ifdef CONFIG_ARCH_OMAP34XX + u16 buffer_size; +#endif }; struct omap_mcbsp { @@ -381,6 +384,10 @@ struct omap_mcbsp { struct omap_mcbsp_platform_data *pdata; struct clk *iclk; struct clk *fclk; +#ifdef CONFIG_ARCH_OMAP34XX + u16 max_tx_thres; + u16 max_rx_thres; +#endif }; extern struct omap_mcbsp **mcbsp_ptr; extern int omap_mcbsp_count; @@ -392,11 +399,15 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config #ifdef CONFIG_ARCH_OMAP34XX void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); +u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); +u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); #else static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { } static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { } +static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } +static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } #endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 081f2eace92d..0bbc912e548d 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -246,6 +246,42 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) OMAP_MCBSP_WRITE(io_base, THRSH1, threshold); } EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); + +/* + * omap_mcbsp_get_max_tx_thres just return the current configured + * maximum threshold for transmission + */ +u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + return mcbsp->max_tx_thres; +} +EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); + +/* + * omap_mcbsp_get_max_rx_thres just return the current configured + * maximum threshold for reception + */ +u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + return mcbsp->max_rx_thres; +} +EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); #endif /* @@ -1005,6 +1041,86 @@ void omap_mcbsp_set_spi_mode(unsigned int id, } EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); +#ifdef CONFIG_ARCH_OMAP34XX +#define max_thres(m) (mcbsp->pdata->buffer_size) +#define valid_threshold(m, val) ((val) <= max_thres(m)) +#define THRESHOLD_PROP_BUILDER(prop) \ +static ssize_t prop##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + \ + return sprintf(buf, "%u\n", mcbsp->prop); \ +} \ + \ +static ssize_t prop##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *buf, size_t size) \ +{ \ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ + unsigned long val; \ + int status; \ + \ + status = strict_strtoul(buf, 0, &val); \ + if (status) \ + return status; \ + \ + if (!valid_threshold(mcbsp, val)) \ + return -EDOM; \ + \ + mcbsp->prop = val; \ + return size; \ +} \ + \ +static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); + +THRESHOLD_PROP_BUILDER(max_tx_thres); +THRESHOLD_PROP_BUILDER(max_rx_thres); + +static const struct attribute *threshold_attrs[] = { + &dev_attr_max_tx_thres.attr, + &dev_attr_max_rx_thres.attr, + NULL, +}; + +static const struct attribute_group threshold_attr_group = { + .attrs = (struct attribute **)threshold_attrs, +}; + +static inline int __devinit omap_thres_add(struct device *dev) +{ + return sysfs_create_group(&dev->kobj, &threshold_attr_group); +} + +static inline void __devexit omap_thres_remove(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &threshold_attr_group); +} + +static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) +{ + if (cpu_is_omap34xx()) { + mcbsp->max_tx_thres = max_thres(mcbsp); + mcbsp->max_rx_thres = max_thres(mcbsp); + if (omap_thres_add(mcbsp->dev)) + dev_warn(mcbsp->dev, + "Unable to create threshold controls\n"); + } else { + mcbsp->max_tx_thres = -EINVAL; + mcbsp->max_rx_thres = -EINVAL; + } +} + +static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) +{ + if (cpu_is_omap34xx()) + omap_thres_remove(mcbsp->dev); +} +#else +static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} +static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {} +#endif /* CONFIG_ARCH_OMAP34XX */ + /* * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. * 730 has only 2 McBSP, and both of them are MPU peripherals. @@ -1075,6 +1191,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) mcbsp->dev = &pdev->dev; mcbsp_ptr[id] = mcbsp; platform_set_drvdata(pdev, mcbsp); + + /* Initialize mcbsp properties for OMAP34XX if needed / applicable */ + omap34xx_device_init(mcbsp); + return 0; err_fclk: @@ -1098,6 +1218,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev) mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(mcbsp->id); + omap34xx_device_exit(mcbsp); + clk_disable(mcbsp->fclk); clk_disable(mcbsp->iclk); clk_put(mcbsp->fclk); -- cgit v1.2.3-58-ga151 From 7e4f943b725008272d5c50e676a89d642232a4e3 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 20 Aug 2009 16:18:12 +0300 Subject: OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5 Do not allow applications to use the full buffer found on McBSP1,3,4,5. Using the full buffer in threshold mode causes the McBSP buffer to run dry, which can be observed as channels are switching (in reality the channels are shifting). Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/mach-omap2/mcbsp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index f837114d1d69..7d22caf60090 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -129,7 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP1_IRQ_RX, .tx_irq = INT_24XX_MCBSP1_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x7F, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP2_BASE, @@ -147,7 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP3_IRQ_RX, .tx_irq = INT_24XX_MCBSP3_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x7F, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP4_BASE, @@ -156,7 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP4_IRQ_RX, .tx_irq = INT_24XX_MCBSP4_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x7F, + .buffer_size = 0x6F, }, { .phys_base = OMAP34XX_MCBSP5_BASE, @@ -165,7 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = { .rx_irq = INT_24XX_MCBSP5_IRQ_RX, .tx_irq = INT_24XX_MCBSP5_IRQ_TX, .ops = &omap2_mcbsp_ops, - .buffer_size = 0x7F, + .buffer_size = 0x6F, }, }; #define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata) -- cgit v1.2.3-58-ga151 From 4c8200aeb04b8aeaf8c7425f49caf761e2cda95a Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:13 +0300 Subject: OMAP: McBSP: Rename thres sysfs symbols This patch renames the symbols that handles threshold sysfs properties. This way we can add more sysfs properties to them. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 0bbc912e548d..ccaa9aedb0a2 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1077,24 +1077,24 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); THRESHOLD_PROP_BUILDER(max_tx_thres); THRESHOLD_PROP_BUILDER(max_rx_thres); -static const struct attribute *threshold_attrs[] = { +static const struct attribute *additional_attrs[] = { &dev_attr_max_tx_thres.attr, &dev_attr_max_rx_thres.attr, NULL, }; -static const struct attribute_group threshold_attr_group = { - .attrs = (struct attribute **)threshold_attrs, +static const struct attribute_group additional_attr_group = { + .attrs = (struct attribute **)additional_attrs, }; -static inline int __devinit omap_thres_add(struct device *dev) +static inline int __devinit omap_additional_add(struct device *dev) { - return sysfs_create_group(&dev->kobj, &threshold_attr_group); + return sysfs_create_group(&dev->kobj, &additional_attr_group); } -static inline void __devexit omap_thres_remove(struct device *dev) +static inline void __devexit omap_additional_remove(struct device *dev) { - sysfs_remove_group(&dev->kobj, &threshold_attr_group); + sysfs_remove_group(&dev->kobj, &additional_attr_group); } static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) @@ -1102,9 +1102,9 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) if (cpu_is_omap34xx()) { mcbsp->max_tx_thres = max_thres(mcbsp); mcbsp->max_rx_thres = max_thres(mcbsp); - if (omap_thres_add(mcbsp->dev)) + if (omap_additional_add(mcbsp->dev)) dev_warn(mcbsp->dev, - "Unable to create threshold controls\n"); + "Unable to create additional controls\n"); } else { mcbsp->max_tx_thres = -EINVAL; mcbsp->max_rx_thres = -EINVAL; @@ -1114,7 +1114,7 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) { if (cpu_is_omap34xx()) - omap_thres_remove(mcbsp->dev); + omap_additional_remove(mcbsp->dev); } #else static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {} -- cgit v1.2.3-58-ga151 From 98cb20e88957faf9c99e194242caac7f55dd47e4 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 20 Aug 2009 16:18:14 +0300 Subject: OMAP: McBSP: Add link DMA mode selection It adds a new sysfs file, where the user can configure the mcbsp mode to use. If the mcbsp channel is in use, it does not allow the change. Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode, store it, than use it to implement the different modes. Signed-off-by: Peter Ujfalusi Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 8 ++++ arch/arm/plat-omap/mcbsp.c | 84 +++++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 832330d7cb39..bd5b759991c8 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -255,6 +255,11 @@ /********************** McBSP SYSCONFIG bit definitions ********************/ #define SOFTRST 0x0002 +/********************** McBSP DMA operating modes **************************/ +#define MCBSP_DMA_MODE_ELEMENT 0 +#define MCBSP_DMA_MODE_THRESHOLD 1 +#define MCBSP_DMA_MODE_FRAME 2 + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; @@ -385,6 +390,7 @@ struct omap_mcbsp { struct clk *iclk; struct clk *fclk; #ifdef CONFIG_ARCH_OMAP34XX + int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; #endif @@ -401,6 +407,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +int omap_mcbsp_get_dma_op_mode(unsigned int id); #else static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { } @@ -408,6 +415,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { } static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } #endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index ccaa9aedb0a2..9e699947a693 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -282,6 +282,29 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) return mcbsp->max_rx_thres; } EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); + +/* + * omap_mcbsp_get_dma_op_mode just return the current configured + * operating mode for the mcbsp channel + */ +int omap_mcbsp_get_dma_op_mode(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + int dma_op_mode; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + return dma_op_mode; +} +EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); #endif /* @@ -1077,9 +1100,65 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); THRESHOLD_PROP_BUILDER(max_tx_thres); THRESHOLD_PROP_BUILDER(max_rx_thres); +static ssize_t dma_op_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + int dma_op_mode; + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + return sprintf(buf, "current mode: %d\n" + "possible mode values are:\n" + "%d - %s\n" + "%d - %s\n" + "%d - %s\n", + dma_op_mode, + MCBSP_DMA_MODE_ELEMENT, "element mode", + MCBSP_DMA_MODE_THRESHOLD, "threshold mode", + MCBSP_DMA_MODE_FRAME, "frame mode"); +} + +static ssize_t dma_op_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + unsigned long val; + int status; + + status = strict_strtoul(buf, 0, &val); + if (status) + return status; + + spin_lock_irq(&mcbsp->lock); + + if (!mcbsp->free) { + size = -EBUSY; + goto unlock; + } + + if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) { + size = -EINVAL; + goto unlock; + } + + mcbsp->dma_op_mode = val; + +unlock: + spin_unlock_irq(&mcbsp->lock); + + return size; +} + +static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); + static const struct attribute *additional_attrs[] = { &dev_attr_max_tx_thres.attr, &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, NULL, }; @@ -1099,9 +1178,14 @@ static inline void __devexit omap_additional_remove(struct device *dev) static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) { + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; if (cpu_is_omap34xx()) { mcbsp->max_tx_thres = max_thres(mcbsp); mcbsp->max_rx_thres = max_thres(mcbsp); + /* + * REVISIT: Set dmap_op_mode to THRESHOLD as default + * for mcbsp2 instances. + */ if (omap_additional_add(mcbsp->dev)) dev_warn(mcbsp->dev, "Unable to create additional controls\n"); -- cgit v1.2.3-58-ga151 From 2122fdc629f05634537e796c0630028e4db76953 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Thu, 20 Aug 2009 16:18:15 +0300 Subject: OMAP: McBSP: Wakeups utilized This patch enables the smart idle mode while McBPS is being utilized. Once it's done, force idle mode is taken instead. Apart of it, it also configures what signals will wake mcbsp up. Signed-off-by: Eero Nurkkala Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 17 ++++++++++++ arch/arm/plat-omap/mcbsp.c | 46 +++++++++++++++++++++++++++++++++ 2 files changed, 63 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index bd5b759991c8..333061d4f4a7 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -138,6 +138,7 @@ #define OMAP_MCBSP_REG_THRSH1 0x94 #define OMAP_MCBSP_REG_IRQST 0xA0 #define OMAP_MCBSP_REG_IRQEN 0xA4 +#define OMAP_MCBSP_REG_WAKEUPEN 0xA8 #define OMAP_MCBSP_REG_XCCR 0xAC #define OMAP_MCBSP_REG_RCCR 0xB0 @@ -253,6 +254,8 @@ #define RDISABLE 0x0001 /********************** McBSP SYSCONFIG bit definitions ********************/ +#define SIDLEMODE(value) ((value)<<3) +#define ENAWAKEUP 0x0004 #define SOFTRST 0x0002 /********************** McBSP DMA operating modes **************************/ @@ -260,6 +263,20 @@ #define MCBSP_DMA_MODE_THRESHOLD 1 #define MCBSP_DMA_MODE_FRAME 2 +/********************** McBSP WAKEUPEN bit definitions *********************/ +#define XEMPTYEOFEN 0x4000 +#define XRDYEN 0x0400 +#define XEOFEN 0x0200 +#define XFSXEN 0x0100 +#define XSYNCERREN 0x0080 +#define RRDYEN 0x0008 +#define REOFEN 0x0004 +#define RFSREN 0x0002 +#define RSYNCERREN 0x0001 +#define WAKEUPEN_ALL (XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \ + XSYNCERREN | RRDYEN | REOFEN | RFSREN | \ + RSYNCERREN) + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 9e699947a693..136f8c5d0dac 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -305,6 +305,46 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id) return dma_op_mode; } EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); + +static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) +{ + /* + * Enable wakup behavior, smart idle and all wakeups + * REVISIT: some wakeups may be unnecessary + */ + if (cpu_is_omap34xx()) { + u16 syscon; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); + syscon |= (ENAWAKEUP | SIDLEMODE(0x02)); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL); + } +} + +static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) +{ + /* + * Disable wakup behavior, smart idle and all wakeups + */ + if (cpu_is_omap34xx()) { + u16 syscon; + u16 wakeupen; + + syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN); + wakeupen &= ~WAKEUPEN_ALL; + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen); + } +} +#else +static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {} +static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {} #endif /* @@ -366,6 +406,9 @@ int omap_mcbsp_request(unsigned int id) clk_enable(mcbsp->iclk); clk_enable(mcbsp->fclk); + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_request(mcbsp); + /* * Make sure that transmitter, receiver and sample-rate generator are * not running before activating IRQs. @@ -414,6 +457,9 @@ void omap_mcbsp_free(unsigned int id) if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) mcbsp->pdata->ops->free(id); + /* Do procedure specific to omap34xx arch, if applicable */ + omap34xx_mcbsp_free(mcbsp); + clk_disable(mcbsp->fclk); clk_disable(mcbsp->iclk); -- cgit v1.2.3-58-ga151 From d9a9b3f5f7d4736cfe6fae95b9d63b07faeb702e Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:16 +0300 Subject: OMAP: McBSP: Change wakeup signals Configure only XRDYEN and RRDYEN wakeup signals in order to get better power consumption. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 3 --- arch/arm/plat-omap/mcbsp.c | 7 ++----- 2 files changed, 2 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 333061d4f4a7..fe10ae8b027b 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -273,9 +273,6 @@ #define REOFEN 0x0004 #define RFSREN 0x0002 #define RSYNCERREN 0x0001 -#define WAKEUPEN_ALL (XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \ - XSYNCERREN | RRDYEN | REOFEN | RFSREN | \ - RSYNCERREN) /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 136f8c5d0dac..86bfad88abdf 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -320,7 +320,7 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) syscon |= (ENAWAKEUP | SIDLEMODE(0x02)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); - OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL); + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN); } } @@ -331,15 +331,12 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) */ if (cpu_is_omap34xx()) { u16 syscon; - u16 wakeupen; syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); - wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN); - wakeupen &= ~WAKEUPEN_ALL; - OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen); + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0); } } #else -- cgit v1.2.3-58-ga151 From 2ba93f8fa77c0140de163e8a31bb9c09b5ded74c Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Thu, 20 Aug 2009 16:18:17 +0300 Subject: OMAP: McBSP: Retain McBSP FCLK clockactivity FCLK may get autogated so that it prevents the McBSP to work properly. It is the bit 9 that must be set for maintaining the McBSP FCLK. Signed-off-by: Eero Nurkkala Signed-off-by: Eduardo Valentin Acked-by: Jarkko Nikula Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 1 + arch/arm/plat-omap/mcbsp.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index fe10ae8b027b..70e950e295e1 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -254,6 +254,7 @@ #define RDISABLE 0x0001 /********************** McBSP SYSCONFIG bit definitions ********************/ +#define CLOCKACTIVITY(value) ((value)<<8) #define SIDLEMODE(value) ((value)<<3) #define ENAWAKEUP 0x0004 #define SOFTRST 0x0002 diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 86bfad88abdf..2c274e6f0de9 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -316,8 +316,8 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) u16 syscon; syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); - syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); - syscon |= (ENAWAKEUP | SIDLEMODE(0x02)); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); + syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN); @@ -333,7 +333,7 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) u16 syscon; syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); - syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03)); + syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0); -- cgit v1.2.3-58-ga151 From d99a7454e57d3dc9d04d6a77292a056f430a9ece Mon Sep 17 00:00:00 2001 From: Eduardo Valentin Date: Thu, 20 Aug 2009 16:18:18 +0300 Subject: OMAP: McBSP: Configure NO IDLE mode for DMA mode different of threshold Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs. Signed-off-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 2c274e6f0de9..85176a5f4148 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -317,7 +317,15 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); - syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02)); + + spin_lock_irq(&mcbsp->lock); + if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) + syscon |= SIDLEMODE(0x02); + else + syscon |= SIDLEMODE(0x01); + spin_unlock_irq(&mcbsp->lock); + + syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN); -- cgit v1.2.3-58-ga151 From fa3935ba34667ffd35fbb33958cd1d67035fdf82 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Thu, 20 Aug 2009 16:18:19 +0300 Subject: OMAP: McBSP: Do not enable wakeups for no-idle mode When no-idle mode is taken, wakeups need not to be enabled. Moreover, CLOCKACTIVITY bits are unnecessary with this mode also. Signed-off-by: Eero Nurkkala Acked-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 85176a5f4148..56a56887dedc 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -319,16 +319,17 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); spin_lock_irq(&mcbsp->lock); - if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) - syscon |= SIDLEMODE(0x02); - else + if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) { + syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | + CLOCKACTIVITY(0x02)); + OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, + XRDYEN | RRDYEN); + } else { syscon |= SIDLEMODE(0x01); + } spin_unlock_irq(&mcbsp->lock); - syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); - - OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN); } } -- cgit v1.2.3-58-ga151 From 72cc6d715d5b018e2cff4adb68966855850d4e77 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Thu, 20 Aug 2009 16:18:20 +0300 Subject: OMAP: McBSP: Let element DMA mode hit retention also The device no longer hits retention if element DMA mode is taken for at least the duration of the serial console timeout. Force element DMA mode to shut down through smartidle. Signed-off-by: Eero Nurkkala Acked-by: Eduardo Valentin Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 56a56887dedc..b63a7209b41c 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -343,6 +343,15 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON); syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03)); + /* + * HW bug workaround - If no_idle mode is taken, we need to + * go to smart_idle before going to always_idle, or the + * device will not hit retention anymore. + */ + syscon |= SIDLEMODE(0x02); + OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); + + syscon &= ~(SIDLEMODE(0x03)); OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon); OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0); -- cgit v1.2.3-58-ga151 From 14412acde5b57450b8afb3d4b03132419b6abebf Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 20 Aug 2009 22:50:40 +0100 Subject: ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks Signed-off-by: Mark Brown --- arch/arm/plat-s3c/include/plat/audio-simtec.h | 37 +++ sound/soc/s3c24xx/Kconfig | 12 + sound/soc/s3c24xx/Makefile | 4 + sound/soc/s3c24xx/s3c24xx_simtec.c | 394 +++++++++++++++++++++++++ sound/soc/s3c24xx/s3c24xx_simtec.h | 22 ++ sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c | 137 +++++++++ 6 files changed, 606 insertions(+) create mode 100644 arch/arm/plat-s3c/include/plat/audio-simtec.h create mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.c create mode 100644 sound/soc/s3c24xx/s3c24xx_simtec.h create mode 100644 sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h new file mode 100644 index 000000000000..0f440b9168db --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h @@ -0,0 +1,37 @@ +/* arch/arm/plat-s3c/include/plat/audio-simtec.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; + +extern int simtec_audio_add(const char *codec_name, + struct s3c24xx_audio_simtec_pdata *pdata); diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 2987239f1383..78cfd8d08e56 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -79,3 +79,15 @@ config SND_S3C24XX_SOC_S3C24XX_UDA134X select SND_S3C24XX_SOC_I2S select SND_SOC_L3 select SND_SOC_UDA134X + +config SND_S3C24XX_SOC_SIMTEC + tristate + help + Internal node for common S3C24XX/Simtec suppor + +config SND_S3C24XX_SOC_SIMTEC_TLV320AIC23 + tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" + depends on SND_S3C24XX_SOC + select SND_S3C24XX_SOC_I2S + select SND_SOC_TLV320AIC23 + select SND_S3C24XX_SOC_SIMTEC diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index eb219b016499..1ccbb877df3c 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -20,6 +20,8 @@ snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o +snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o +snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o @@ -27,3 +29,5 @@ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm87 obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o +obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o +obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c new file mode 100644 index 000000000000..1966e0d5652d --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec.c @@ -0,0 +1,394 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +static struct s3c24xx_audio_simtec_pdata *pdata; +static struct clk *xtal_clk; + +static int spk_gain; +static int spk_unmute; + +/** + * speaker_gain_get - read the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_gain_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_gain; + return 0; +} + +/** + * speaker_gain_set - set the value of the speaker amp gain + * @value: The value to write. + */ +static void speaker_gain_set(int value) +{ + gpio_set_value_cansleep(pdata->amp_gain[0], value & 1); + gpio_set_value_cansleep(pdata->amp_gain[1], value >> 1); +} + +/** + * speaker_gain_put - set the speaker gain setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + * + * Note, if the speaker amp is muted, then we do not set a gain value + * as at-least one of the ICs that is fitted will try and power up even + * if the main control is set to off. + */ +static int speaker_gain_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int value = ucontrol->value.integer.value[0]; + + spk_gain = value; + + if (!spk_unmute) + speaker_gain_set(value); + + return 0; +} + +static const struct snd_kcontrol_new amp_gain_controls[] = { + SOC_SINGLE_EXT("Speaker Gain", 0, 0, 3, 0, + speaker_gain_get, speaker_gain_put), +}; + +/** + * spk_unmute_state - set the unmute state of the speaker + * @to: zero to unmute, non-zero to ununmute. + */ +static void spk_unmute_state(int to) +{ + pr_debug("%s: to=%d\n", __func__, to); + + spk_unmute = to; + gpio_set_value(pdata->amp_gpio, to); + + /* if we're umuting, also re-set the gain */ + if (to && pdata->amp_gain[0] > 0) + speaker_gain_set(spk_gain); +} + +/** + * speaker_unmute_get - read the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be updated. + * + * Read the value for the AMP gain control. + */ +static int speaker_unmute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = spk_unmute; + return 0; +} + +/** + * speaker_unmute_put - set the speaker unmute setting. + * @kcontrol: The control for the speaker gain. + * @ucontrol: The value that needs to be set. + * + * Set the value of the speaker gain from the specified + * @ucontrol setting. + */ +static int speaker_unmute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + spk_unmute_state(ucontrol->value.integer.value[0]); + return 0; +} + +/* This is added as a manual control as the speaker amps create clicks + * when their power state is changed, which are far more noticeable than + * anything produced by the CODEC itself. + */ +static const struct snd_kcontrol_new amp_unmute_controls[] = { + SOC_SINGLE_EXT("Speaker Switch", 0, 0, 1, 0, + speaker_unmute_get, speaker_unmute_put), +}; + +void simtec_audio_init(struct snd_soc_codec *codec) +{ + if (pdata->amp_gpio > 0) { + pr_debug("%s: adding amp routes\n", __func__); + + snd_soc_add_controls(codec, amp_unmute_controls, + ARRAY_SIZE(amp_unmute_controls)); + } + + if (pdata->amp_gain[0] > 0) { + pr_debug("%s: adding amp controls\n", __func__); + snd_soc_add_controls(codec, amp_gain_controls, + ARRAY_SIZE(amp_gain_controls)); + } +} +EXPORT_SYMBOL_GPL(simtec_audio_init); + +#define CODEC_CLOCK 12000000 + +/** + * simtec_hw_params - update hardware parameters + * @substream: The audio substream instance. + * @params: The parameters requested. + * + * Update the codec data routing and configuration settings + * from the supplied data. + */ +static int simtec_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set the CODEC as the bus clock master, I2S */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set cpu dai format\n", __func__); + return ret; + } + + /* Set the CODEC as the bus clock master */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret) { + pr_err("%s: failed set codec dai format\n", __func__); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, + CODEC_CLOCK, SND_SOC_CLOCK_IN); + if (ret) { + pr_err( "%s: failed setting codec sysclk\n", __func__); + return ret; + } + + if (pdata->use_mpllin) { + ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_MPLL, + 0, SND_SOC_CLOCK_OUT); + + if (ret) { + pr_err("%s: failed to set MPLLin as clksrc\n", + __func__); + return ret; + } + } + + if (pdata->output_cdclk) { + int cdclk_scale; + + cdclk_scale = clk_get_rate(xtal_clk) / CODEC_CLOCK; + cdclk_scale--; + + ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER, + cdclk_scale); + } + + return 0; +} + +static int simtec_call_startup(struct s3c24xx_audio_simtec_pdata *pd) +{ + /* call any board supplied startup code, this currently only + * covers the bast/vr1000 which have a CPLD in the way of the + * LRCLK */ + if (pd->startup) + pd->startup(); + + return 0; +} + +static struct snd_soc_ops simtec_snd_ops = { + .hw_params = simtec_hw_params, +}; + +/** + * attach_gpio_amp - get and configure the necessary gpios + * @dev: The device we're probing. + * @pd: The platform data supplied by the board. + * + * If there is a GPIO based amplifier attached to the board, claim + * the necessary GPIO lines for it, and set default values. + */ +static int attach_gpio_amp(struct device *dev, + struct s3c24xx_audio_simtec_pdata *pd) +{ + int ret; + + /* attach gpio amp gain (if any) */ + if (pdata->amp_gain[0] > 0) { + ret = gpio_request(pd->amp_gain[0], "gpio-amp-gain0"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain0\n"); + return ret; + } + + ret = gpio_request(pd->amp_gain[1], "gpio-amp-gain1"); + if (ret) { + dev_err(dev, "cannot get amp gpio gain1\n"); + gpio_free(pdata->amp_gain[0]); + return ret; + } + + gpio_direction_output(pd->amp_gain[0], 0); + gpio_direction_output(pd->amp_gain[1], 0); + } + + /* note, curently we assume GPA0 isn't valid amp */ + if (pdata->amp_gpio > 0) { + ret = gpio_request(pd->amp_gpio, "gpio-amp"); + if (ret) { + dev_err(dev, "cannot get amp gpio %d (%d)\n", + pd->amp_gpio, ret); + goto err_amp; + } + + /* set the amp off at startup */ + spk_unmute_state(0); + } + + return 0; + +err_amp: + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + return ret; +} + +static void detach_gpio_amp(struct s3c24xx_audio_simtec_pdata *pd) +{ + if (pd->amp_gain[0] > 0) { + gpio_free(pd->amp_gain[0]); + gpio_free(pd->amp_gain[1]); + } + + if (pd->amp_gpio > 0) + gpio_free(pd->amp_gpio); +} + +#ifdef CONFIG_PM +int simtec_audio_resume(struct device *dev) +{ + simtec_call_startup(pdata); + return 0; +} + +struct dev_pm_ops simtec_audio_pmops = { + .resume = simtec_audio_resume, +}; +EXPORT_SYMBOL_GPL(simtec_audio_pmops); +#endif + +int __devinit simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_device *socdev) +{ + struct platform_device *snd_dev; + int ret; + + socdev->card->dai_link->ops = &simtec_snd_ops; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data supplied\n"); + return -EINVAL; + } + + simtec_call_startup(pdata); + + xtal_clk = clk_get(&pdev->dev, "xtal"); + if (IS_ERR(xtal_clk)) { + dev_err(&pdev->dev, "could not get clkout0\n"); + return -EINVAL; + } + + dev_info(&pdev->dev, "xtal rate is %ld\n", clk_get_rate(xtal_clk)); + + ret = attach_gpio_amp(&pdev->dev, pdata); + if (ret) + goto err_clk; + + snd_dev = platform_device_alloc("soc-audio", -1); + if (!snd_dev) { + dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n"); + ret = -ENOMEM; + goto err_gpio; + } + + platform_set_drvdata(snd_dev, socdev); + socdev->dev = &snd_dev->dev; + + ret = platform_device_add(snd_dev); + if (ret) { + dev_err(&pdev->dev, "failed to add soc-audio dev\n"); + goto err_pdev; + } + + platform_set_drvdata(pdev, snd_dev); + return 0; + +err_pdev: + platform_device_put(snd_dev); + +err_gpio: + detach_gpio_amp(pdata); + +err_clk: + clk_put(xtal_clk); + return ret; +} +EXPORT_SYMBOL_GPL(simtec_audio_core_probe); + +int __devexit simtec_audio_remove(struct platform_device *pdev) +{ + struct platform_device *snd_dev = platform_get_drvdata(pdev); + + platform_device_unregister(snd_dev); + + detach_gpio_amp(pdata); + clk_put(xtal_clk); + return 0; +} +EXPORT_SYMBOL_GPL(simtec_audio_remove); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio common support"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.h b/sound/soc/s3c24xx/s3c24xx_simtec.h new file mode 100644 index 000000000000..2714203af161 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec.h @@ -0,0 +1,22 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec.h + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern void simtec_audio_init(struct snd_soc_codec *codec); + +extern int simtec_audio_core_probe(struct platform_device *pdev, + struct snd_soc_device *socdev); + +extern int simtec_audio_remove(struct platform_device *pdev); + +#ifdef CONFIG_PM +extern struct dev_pm_ops simtec_audio_pmops; +#define simtec_audio_pm &simtec_audio_pmops +#else +#define simtec_audio_pm NULL +#endif diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c new file mode 100644 index 000000000000..25797e096175 --- /dev/null +++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c @@ -0,0 +1,137 @@ +/* sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c + * + * Copyright 2009 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "s3c24xx-pcm.h" +#include "s3c24xx-i2s.h" +#include "s3c24xx_simtec.h" + +#include "../codecs/tlv320aic23.h" + +/* supported machines: + * + * Machine Connections AMP + * ------- ----------- --- + * BAST MIC, HPOUT, LOUT, LIN TPA2001D1 (HPOUTL,R) (gain hardwired) + * VR1000 HPOUT, LIN None + * VR2000 LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * DePicture LIN, LOUT, MIC, HP LM4871 (HPOUTL,R) + * Anubis LIN, LOUT, MIC, HP TPA2001D1 (HPOUTL,R) + */ + +static const struct snd_soc_dapm_widget dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In", NULL), + SND_SOC_DAPM_LINE("Line Out", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), +}; + +static const struct snd_soc_dapm_route base_map[] = { + { "Headphone Jack", NULL, "LHPOUT"}, + { "Headphone Jack", NULL, "RHPOUT"}, + + { "Line Out", NULL, "LOUT" }, + { "Line Out", NULL, "ROUT" }, + + { "LLINEIN", NULL, "Line In"}, + { "RLINEIN", NULL, "Line In"}, + + { "MICIN", NULL, "Mic Jack"}, +}; + +/** + * simtec_tlv320aic23_init - initialise and add controls + * @codec; The codec instance to attach to. + * + * Attach our controls and configure the necessary codec + * mappings for our sound card instance. +*/ +static int simtec_tlv320aic23_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, dapm_widgets, + ARRAY_SIZE(dapm_widgets)); + + snd_soc_dapm_add_routes(codec, base_map, ARRAY_SIZE(base_map)); + + snd_soc_dapm_enable_pin(codec, "Headphone Jack"); + snd_soc_dapm_enable_pin(codec, "Line In"); + snd_soc_dapm_enable_pin(codec, "Line Out"); + snd_soc_dapm_enable_pin(codec, "Mic Jack"); + + simtec_audio_init(codec); + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link simtec_dai_aic23 = { + .name = "tlv320aic23", + .stream_name = "TLV320AIC23", + .cpu_dai = &s3c24xx_i2s_dai, + .codec_dai = &tlv320aic23_dai, + .init = simtec_tlv320aic23_init, +}; + +/* simtec audio machine driver */ +static struct snd_soc_card snd_soc_machine_simtec_aic23 = { + .name = "Simtec", + .platform = &s3c24xx_soc_platform, + .dai_link = &simtec_dai_aic23, + .num_links = 1, +}; + +/* simtec audio subsystem */ +static struct snd_soc_device simtec_snd_devdata_aic23 = { + .card = &snd_soc_machine_simtec_aic23, + .codec_dev = &soc_codec_dev_tlv320aic23, +}; + +static int __devinit simtec_audio_tlv320aic23_probe(struct platform_device *pd) +{ + return simtec_audio_core_probe(pd, &simtec_snd_devdata_aic23); +} + +static struct platform_driver simtec_audio_tlv320aic23_platdrv = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c24xx-simtec-tlv320aic23", + .pm = simtec_audio_pm, + }, + .probe = simtec_audio_tlv320aic23_probe, + .remove = __devexit_p(simtec_audio_remove), +}; + +MODULE_ALIAS("platform:s3c24xx-simtec-tlv320aic23"); + +static int __init simtec_tlv320aic23_modinit(void) +{ + return platform_driver_register(&simtec_audio_tlv320aic23_platdrv); +} + +static void __exit simtec_tlv320aic23_modexit(void) +{ + platform_driver_unregister(&simtec_audio_tlv320aic23_platdrv); +} + +module_init(simtec_tlv320aic23_modinit); +module_exit(simtec_tlv320aic23_modexit); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("ALSA SoC Simtec Audio support"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-58-ga151 From 9f0f4ae570a148c76be6e86c959c8d4ed912fb1f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sun, 23 Aug 2009 17:56:12 +0200 Subject: ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT flags of the DMA CCR register. Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/plat-omap/dma.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index def14ec265b3..da4cc5288db0 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1125,6 +1125,11 @@ int omap_dma_running(void) void omap_dma_link_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + dma_write(dma_read(CCR(lch_head)) | (3 << 8), + CCR(lch_head)); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; @@ -1147,6 +1152,11 @@ EXPORT_SYMBOL(omap_dma_link_lch); void omap_dma_unlink_lch(int lch_head, int lch_queue) { if (omap_dma_in_1510_mode()) { + if (lch_head == lch_queue) { + dma_write(dma_read(CCR(lch_head)) & ~(3 << 8), + CCR(lch_head)); + return; + } printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); BUG(); return; -- cgit v1.2.3-58-ga151 From 9b30050908fad96968497e73b88626056ea33c96 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 24 Aug 2009 17:45:50 +0300 Subject: OMAP: McBSP: Use textual values in DMA operating mode sysfs files Use more descriptive than numerical value when showing and storing the McBSP DMA operating mode. Show function is using similar syntax than e.g. the led triggers so that all possible values for store function are printed but with current value surrounded with square brackets. Signed-off-by: Jarkko Nikula Cc: Peter Ujfalusi Acked-by: Eduardo Valentin Signed-off-by: Mark Brown --- arch/arm/plat-omap/mcbsp.c | 48 ++++++++++++++++++++++++---------------------- 1 file changed, 25 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index b63a7209b41c..ee60ab68251d 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1161,25 +1161,31 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); THRESHOLD_PROP_BUILDER(max_tx_thres); THRESHOLD_PROP_BUILDER(max_rx_thres); +static const char *dma_op_modes[] = { + "element", "threshold", "frame", +}; + static ssize_t dma_op_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - int dma_op_mode; + int dma_op_mode, i = 0; + ssize_t len = 0; + const char * const *s; spin_lock_irq(&mcbsp->lock); dma_op_mode = mcbsp->dma_op_mode; spin_unlock_irq(&mcbsp->lock); - return sprintf(buf, "current mode: %d\n" - "possible mode values are:\n" - "%d - %s\n" - "%d - %s\n" - "%d - %s\n", - dma_op_mode, - MCBSP_DMA_MODE_ELEMENT, "element mode", - MCBSP_DMA_MODE_THRESHOLD, "threshold mode", - MCBSP_DMA_MODE_FRAME, "frame mode"); + for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { + if (dma_op_mode == i) + len += sprintf(buf + len, "[%s] ", *s); + else + len += sprintf(buf + len, "%s ", *s); + } + len += sprintf(buf + len, "\n"); + + return len; } static ssize_t dma_op_mode_store(struct device *dev, @@ -1187,26 +1193,22 @@ static ssize_t dma_op_mode_store(struct device *dev, const char *buf, size_t size) { struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - unsigned long val; - int status; + const char * const *s; + int i = 0; - status = strict_strtoul(buf, 0, &val); - if (status) - return status; + for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) + if (sysfs_streq(buf, *s)) + break; - spin_lock_irq(&mcbsp->lock); + if (i == ARRAY_SIZE(dma_op_modes)) + return -EINVAL; + spin_lock_irq(&mcbsp->lock); if (!mcbsp->free) { size = -EBUSY; goto unlock; } - - if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) { - size = -EINVAL; - goto unlock; - } - - mcbsp->dma_op_mode = val; + mcbsp->dma_op_mode = i; unlock: spin_unlock_irq(&mcbsp->lock); -- cgit v1.2.3-58-ga151 From d09a2afc9359407114b7062519101f1ee2d05388 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Sun, 23 Aug 2009 12:24:27 +0300 Subject: ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing to start and stop individually the transmitter and receiver. This cleans up the code in arch/arm/plat-omap/mcbsp.c and in sound/soc/omap/omap-mcbsp.c which was the only user for those removed functions. Signed-off-by: Jarkko Nikula Acked-by: Eero Nurkkala Cc: Peter Ujfalusi Signed-off-by: Mark Brown --- arch/arm/plat-omap/include/mach/mcbsp.h | 2 - arch/arm/plat-omap/mcbsp.c | 84 +++++++++++---------------------- sound/soc/omap/omap-mcbsp.c | 5 -- 3 files changed, 28 insertions(+), 63 deletions(-) (limited to 'arch') diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 70e950e295e1..63a3f254af7b 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -436,8 +436,6 @@ int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); -void omap_mcbsp_xmit_enable(unsigned int id, u8 enable); -void omap_mcbsp_recv_enable(unsigned int id, u8 enable); void omap_mcbsp_xmit_word(unsigned int id, u32 word); u32 omap_mcbsp_recv_word(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index ee60ab68251d..8dc7927906f1 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -529,11 +529,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) } /* Enable transmitter and receiver */ + tx &= 1; w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1)); + OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx); + rx &= 1; w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1)); + OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx); /* * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec @@ -549,6 +551,16 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); } + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + /* Release the transmitter and receiver */ + w = OMAP_MCBSP_READ(io_base, XCCR); + w &= ~(tx ? XDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, XCCR, w); + w = OMAP_MCBSP_READ(io_base, RCCR); + w &= ~(rx ? RDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, RCCR, w); + } + /* Dump McBSP Regs */ omap_mcbsp_dump_reg(id); } @@ -570,12 +582,24 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) io_base = mcbsp->io_base; /* Reset transmitter */ + tx &= 1; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + w = OMAP_MCBSP_READ(io_base, XCCR); + w |= (tx ? XDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, XCCR, w); + } w = OMAP_MCBSP_READ(io_base, SPCR2); - OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1)); + OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx); /* Reset receiver */ + rx &= 1; + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + w = OMAP_MCBSP_READ(io_base, RCCR); + w |= (tx ? RDISABLE : 0); + OMAP_MCBSP_WRITE(io_base, RCCR, w); + } w = OMAP_MCBSP_READ(io_base, SPCR1); - OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1)); + OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx); idle = !((OMAP_MCBSP_READ(io_base, SPCR2) | OMAP_MCBSP_READ(io_base, SPCR1)) & 1); @@ -588,58 +612,6 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) } EXPORT_SYMBOL(omap_mcbsp_stop); -void omap_mcbsp_xmit_enable(unsigned int id, u8 enable) -{ - struct omap_mcbsp *mcbsp; - void __iomem *io_base; - u16 w; - - if (!(cpu_is_omap2430() || cpu_is_omap34xx())) - return; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - io_base = mcbsp->io_base; - - w = OMAP_MCBSP_READ(io_base, XCCR); - - if (enable) - OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE)); - else - OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE); -} -EXPORT_SYMBOL(omap_mcbsp_xmit_enable); - -void omap_mcbsp_recv_enable(unsigned int id, u8 enable) -{ - struct omap_mcbsp *mcbsp; - void __iomem *io_base; - u16 w; - - if (!(cpu_is_omap2430() || cpu_is_omap34xx())) - return; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - io_base = mcbsp->io_base; - - w = OMAP_MCBSP_READ(io_base, RCCR); - - if (enable) - OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE)); - else - OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE); -} -EXPORT_SYMBOL(omap_mcbsp_recv_enable); - /* polled mcbsp i/o operations */ int omap_mcbsp_pollwrite(unsigned int id, u16 buf) { diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 89e8bce114af..0e173e7e0c3a 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -231,11 +231,6 @@ static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd, case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: mcbsp_data->active++; omap_mcbsp_start(mcbsp_data->bus_id, play, !play); - /* Make sure data transfer is frame synchronized */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - omap_mcbsp_xmit_enable(mcbsp_data->bus_id, 1); - else - omap_mcbsp_recv_enable(mcbsp_data->bus_id, 1); break; case SNDRV_PCM_TRIGGER_STOP: -- cgit v1.2.3-58-ga151