From f79643787e0a0762d2409b7b8334e83f22d85695 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 17 Nov 2020 16:59:12 +1100 Subject: powerpc/64s: flush L1D on kernel entry IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache on kernel entry. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/exception-64s.h | 9 ++++- arch/powerpc/include/asm/feature-fixups.h | 10 +++++ arch/powerpc/include/asm/security_features.h | 4 ++ arch/powerpc/include/asm/setup.h | 3 ++ arch/powerpc/kernel/exceptions-64s.S | 37 +++++++++++++++++ arch/powerpc/kernel/setup_64.c | 60 +++++++++++++++++++++++++++- arch/powerpc/kernel/vmlinux.lds.S | 7 ++++ arch/powerpc/lib/feature-fixups.c | 54 +++++++++++++++++++++++++ arch/powerpc/platforms/powernv/setup.c | 11 +++++ arch/powerpc/platforms/pseries/setup.c | 4 ++ 10 files changed, 197 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index ebe95aa04d53..83fa88bc9935 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -57,11 +57,18 @@ nop; \ nop +#define ENTRY_FLUSH_SLOT \ + ENTRY_FLUSH_FIXUP_SECTION; \ + nop; \ + nop; \ + nop; + /* * r10 must be free to use, r13 must be paca */ #define INTERRUPT_TO_KERNEL \ - STF_ENTRY_BARRIER_SLOT + STF_ENTRY_BARRIER_SLOT; \ + ENTRY_FLUSH_SLOT /* * Macros for annotating the expected destination of (h)rfid diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h index b0af97add751..06a48219bbf2 100644 --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -205,6 +205,14 @@ label##3: \ FTR_ENTRY_OFFSET 955b-956b; \ .popsection; +#define ENTRY_FLUSH_FIXUP_SECTION \ +957: \ + .pushsection __entry_flush_fixup,"a"; \ + .align 2; \ +958: \ + FTR_ENTRY_OFFSET 957b-958b; \ + .popsection; + #define RFI_FLUSH_FIXUP_SECTION \ 951: \ .pushsection __rfi_flush_fixup,"a"; \ @@ -237,8 +245,10 @@ label##3: \ #include extern long stf_barrier_fallback; +extern long entry_flush_fallback; extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup; extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup; +extern long __start___entry_flush_fixup, __stop___entry_flush_fixup; extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup; extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup; extern long __start__btb_flush_fixup, __stop__btb_flush_fixup; diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index fbb8fa32150f..9e7459d2edca 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -86,12 +86,16 @@ static inline bool security_ftr_enabled(u64 feature) // Software required to flush link stack on context switch #define SEC_FTR_FLUSH_LINK_STACK 0x0000000000001000ull +// The L1-D cache should be flushed when entering the kernel +#define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull + // Features enabled by default #define SEC_FTR_DEFAULT \ (SEC_FTR_L1D_FLUSH_HV | \ SEC_FTR_L1D_FLUSH_PR | \ SEC_FTR_BNDS_CHK_SPEC_BAR | \ + SEC_FTR_L1D_FLUSH_ENTRY | \ SEC_FTR_FAVOUR_SECURITY) #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */ diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index 9efbddee2bca..e2fcd3e874f8 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -52,12 +52,15 @@ enum l1d_flush_type { }; void setup_rfi_flush(enum l1d_flush_type, bool enable); +void setup_entry_flush(bool enable); +void setup_uaccess_flush(bool enable); void do_rfi_flush_fixups(enum l1d_flush_type types); #ifdef CONFIG_PPC_BARRIER_NOSPEC void setup_barrier_nospec(void); #else static inline void setup_barrier_nospec(void) { }; #endif +void do_entry_flush_fixups(enum l1d_flush_type types); void do_barrier_nospec_fixups(bool enable); extern bool barrier_nospec_enabled; diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index f7d748b88705..5577dd887d37 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -2951,6 +2951,43 @@ TRAMP_REAL_BEGIN(stf_barrier_fallback) .endr blr +TRAMP_REAL_BEGIN(entry_flush_fallback) + std r9,PACA_EXRFI+EX_R9(r13) + std r10,PACA_EXRFI+EX_R10(r13) + std r11,PACA_EXRFI+EX_R11(r13) + mfctr r9 + ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) + ld r11,PACA_L1D_FLUSH_SIZE(r13) + srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ + mtctr r11 + DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ + + /* order ld/st prior to dcbt stop all streams with flushing */ + sync + + /* + * The load addresses are at staggered offsets within cachelines, + * which suits some pipelines better (on others it should not + * hurt). + */ +1: + ld r11,(0x80 + 8)*0(r10) + ld r11,(0x80 + 8)*1(r10) + ld r11,(0x80 + 8)*2(r10) + ld r11,(0x80 + 8)*3(r10) + ld r11,(0x80 + 8)*4(r10) + ld r11,(0x80 + 8)*5(r10) + ld r11,(0x80 + 8)*6(r10) + ld r11,(0x80 + 8)*7(r10) + addi r10,r10,0x80*8 + bdnz 1b + + mtctr r9 + ld r9,PACA_EXRFI+EX_R9(r13) + ld r10,PACA_EXRFI+EX_R10(r13) + ld r11,PACA_EXRFI+EX_R11(r13) + blr + TRAMP_REAL_BEGIN(rfi_flush_fallback) SET_SCRATCH0(r13); GET_PACA(r13); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index bb9cab3641d7..7d447b43ad13 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -945,7 +945,9 @@ early_initcall(disable_hardlockup_detector); static enum l1d_flush_type enabled_flush_types; static void *l1d_flush_fallback_area; static bool no_rfi_flush; +static bool no_entry_flush; bool rfi_flush; +bool entry_flush; static int __init handle_no_rfi_flush(char *p) { @@ -955,6 +957,14 @@ static int __init handle_no_rfi_flush(char *p) } early_param("no_rfi_flush", handle_no_rfi_flush); +static int __init handle_no_entry_flush(char *p) +{ + pr_info("entry-flush: disabled on command line."); + no_entry_flush = true; + return 0; +} +early_param("no_entry_flush", handle_no_entry_flush); + /* * The RFI flush is not KPTI, but because users will see doco that says to use * nopti we hijack that option here to also disable the RFI flush. @@ -986,6 +996,18 @@ void rfi_flush_enable(bool enable) rfi_flush = enable; } +void entry_flush_enable(bool enable) +{ + if (enable) { + do_entry_flush_fixups(enabled_flush_types); + on_each_cpu(do_nothing, NULL, 1); + } else { + do_entry_flush_fixups(L1D_FLUSH_NONE); + } + + entry_flush = enable; +} + static void __ref init_fallback_flush(void) { u64 l1d_size, limit; @@ -1044,10 +1066,19 @@ void setup_rfi_flush(enum l1d_flush_type types, bool enable) enabled_flush_types = types; - if (!no_rfi_flush && !cpu_mitigations_off()) + if (!cpu_mitigations_off() && !no_rfi_flush) rfi_flush_enable(enable); } +void setup_entry_flush(bool enable) +{ + if (cpu_mitigations_off()) + return; + + if (!no_entry_flush) + entry_flush_enable(enable); +} + #ifdef CONFIG_DEBUG_FS static int rfi_flush_set(void *data, u64 val) { @@ -1075,9 +1106,36 @@ static int rfi_flush_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(fops_rfi_flush, rfi_flush_get, rfi_flush_set, "%llu\n"); +static int entry_flush_set(void *data, u64 val) +{ + bool enable; + + if (val == 1) + enable = true; + else if (val == 0) + enable = false; + else + return -EINVAL; + + /* Only do anything if we're changing state */ + if (enable != entry_flush) + entry_flush_enable(enable); + + return 0; +} + +static int entry_flush_get(void *data, u64 *val) +{ + *val = entry_flush ? 1 : 0; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n"); + static __init int rfi_flush_debugfs_init(void) { debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush); + debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush); return 0; } device_initcall(rfi_flush_debugfs_init); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index e0548b4950de..715ec4d4614a 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -131,6 +131,13 @@ SECTIONS __stop___stf_entry_barrier_fixup = .; } + . = ALIGN(8); + __entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) { + __start___entry_flush_fixup = .; + *(__entry_flush_fixup) + __stop___entry_flush_fixup = .; + } + . = ALIGN(8); __stf_exit_barrier_fixup : AT(ADDR(__stf_exit_barrier_fixup) - LOAD_OFFSET) { __start___stf_exit_barrier_fixup = .; diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 4c0a7ee9fa00..70e83cfd74aa 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -234,6 +234,60 @@ void do_stf_barrier_fixups(enum stf_barrier_type types) do_stf_exit_barrier_fixups(types); } +void do_entry_flush_fixups(enum l1d_flush_type types) +{ + unsigned int instrs[3], *dest; + long *start, *end; + int i; + + start = PTRRELOC(&__start___entry_flush_fixup); + end = PTRRELOC(&__stop___entry_flush_fixup); + + instrs[0] = 0x60000000; /* nop */ + instrs[1] = 0x60000000; /* nop */ + instrs[2] = 0x60000000; /* nop */ + + i = 0; + if (types == L1D_FLUSH_FALLBACK) { + instrs[i++] = 0x7d4802a6; /* mflr r10 */ + instrs[i++] = 0x60000000; /* branch patched below */ + instrs[i++] = 0x7d4803a6; /* mtlr r10 */ + } + + if (types & L1D_FLUSH_ORI) { + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */ + instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/ + } + + if (types & L1D_FLUSH_MTTRIG) + instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */ + + for (i = 0; start < end; start++, i++) { + dest = (void *)start + *start; + + pr_devel("patching dest %lx\n", (unsigned long)dest); + + patch_instruction((struct ppc_inst *)dest, ppc_inst(instrs[0])); + + if (types == L1D_FLUSH_FALLBACK) + patch_branch((struct ppc_inst *)(dest + 1), (unsigned long)&entry_flush_fallback, + BRANCH_SET_LINK); + else + patch_instruction((struct ppc_inst *)(dest + 1), ppc_inst(instrs[1])); + + patch_instruction((struct ppc_inst *)(dest + 2), ppc_inst(instrs[2])); + } + + printk(KERN_DEBUG "entry-flush: patched %d locations (%s flush)\n", i, + (types == L1D_FLUSH_NONE) ? "no" : + (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" : + (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG) + ? "ori+mttrig type" + : "ori type" : + (types & L1D_FLUSH_MTTRIG) ? "mttrig type" + : "unknown"); +} + void do_rfi_flush_fixups(enum l1d_flush_type types) { unsigned int instrs[3], *dest; diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 9acaa0f131b9..d04a085c423d 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -122,12 +122,23 @@ static void pnv_setup_rfi_flush(void) type = L1D_FLUSH_ORI; } + /* + * If we are non-Power9 bare metal, we don't need to flush on kernel + * entry: it fixes a P9 specific vulnerability. + */ + if (!pvr_version_is(PVR_POWER9)) + security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY); + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \ security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV)); setup_rfi_flush(type, enable); setup_count_cache_flush(); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); + setup_entry_flush(enable); } static void __init pnv_check_guarded_cores(void) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 633c45ec406d..8136c5368ee4 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -579,6 +579,10 @@ void pseries_setup_rfi_flush(void) setup_rfi_flush(types, enable); setup_count_cache_flush(); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); + setup_entry_flush(enable); } #ifdef CONFIG_PCI_IOV -- cgit v1.2.3-58-ga151 From 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 17 Nov 2020 16:59:13 +1100 Subject: powerpc/64s: flush L1D after user accesses IBM Power9 processors can speculatively operate on data in the L1 cache before it has been completely validated, via a way-prediction mechanism. It is not possible for an attacker to determine the contents of impermissible memory using this method, since these systems implement a combination of hardware and software security measures to prevent scenarios where protected data could be leaked. However these measures don't address the scenario where an attacker induces the operating system to speculatively execute instructions using data that the attacker controls. This can be used for example to speculatively bypass "kernel user access prevention" techniques, as discovered by Anthony Steinhauser of Google's Safeside Project. This is not an attack by itself, but there is a possibility it could be used in conjunction with side-channels or other weaknesses in the privileged code to construct an attack. This issue can be mitigated by flushing the L1 cache between privilege boundaries of concern. This patch flushes the L1 cache after user accesses. This is part of the fix for CVE-2020-4788. Signed-off-by: Nicholas Piggin Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman --- Documentation/admin-guide/kernel-parameters.txt | 4 ++ arch/powerpc/include/asm/book3s/64/kup-radix.h | 66 ++++++++++++------- arch/powerpc/include/asm/exception-64s.h | 3 + arch/powerpc/include/asm/feature-fixups.h | 9 +++ arch/powerpc/include/asm/kup.h | 19 ++++-- arch/powerpc/include/asm/security_features.h | 3 + arch/powerpc/include/asm/setup.h | 1 + arch/powerpc/kernel/exceptions-64s.S | 85 ++++++++----------------- arch/powerpc/kernel/setup_64.c | 62 ++++++++++++++++++ arch/powerpc/kernel/vmlinux.lds.S | 7 ++ arch/powerpc/lib/feature-fixups.c | 50 +++++++++++++++ arch/powerpc/platforms/powernv/setup.c | 10 ++- arch/powerpc/platforms/pseries/setup.c | 4 ++ 13 files changed, 233 insertions(+), 90 deletions(-) (limited to 'arch') diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 383889fe771f..44fde25bb221 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2859,6 +2859,7 @@ tsx_async_abort=off [X86] kvm.nx_huge_pages=off [X86] no_entry_flush [PPC] + no_uaccess_flush [PPC] Exceptions: This does not have any effect on @@ -3238,6 +3239,9 @@ nospec_store_bypass_disable [HW] Disable all mitigations for the Speculative Store Bypass vulnerability + no_uaccess_flush + [PPC] Don't flush the L1-D cache after accessing user data. + noxsave [BUGS=X86] Disables x86 extended register state save and restore using xsave. The kernel will fallback to enabling legacy floating-point and sse state. diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h index 3ee1ec60be84..97c2394e7dea 100644 --- a/arch/powerpc/include/asm/book3s/64/kup-radix.h +++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h @@ -61,6 +61,8 @@ #else /* !__ASSEMBLY__ */ +DECLARE_STATIC_KEY_FALSE(uaccess_flush_key); + #ifdef CONFIG_PPC_KUAP #include @@ -103,8 +105,16 @@ static inline void kuap_check_amr(void) static inline unsigned long get_kuap(void) { + /* + * We return AMR_KUAP_BLOCKED when we don't support KUAP because + * prevent_user_access_return needs to return AMR_KUAP_BLOCKED to + * cause restore_user_access to do a flush. + * + * This has no effect in terms of actually blocking things on hash, + * so it doesn't break anything. + */ if (!early_mmu_has_feature(MMU_FTR_RADIX_KUAP)) - return 0; + return AMR_KUAP_BLOCKED; return mfspr(SPRN_AMR); } @@ -123,6 +133,31 @@ static inline void set_kuap(unsigned long value) isync(); } +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) && + (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)), + "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read"); +} +#else /* CONFIG_PPC_KUAP */ +static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) { } + +static inline unsigned long kuap_get_and_check_amr(void) +{ + return 0UL; +} + +static inline void kuap_check_amr(void) { } + +static inline unsigned long get_kuap(void) +{ + return AMR_KUAP_BLOCKED; +} + +static inline void set_kuap(unsigned long value) { } +#endif /* !CONFIG_PPC_KUAP */ + static __always_inline void allow_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { @@ -142,6 +177,8 @@ static inline void prevent_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { set_kuap(AMR_KUAP_BLOCKED); + if (static_branch_unlikely(&uaccess_flush_key)) + do_uaccess_flush(); } static inline unsigned long prevent_user_access_return(void) @@ -149,6 +186,8 @@ static inline unsigned long prevent_user_access_return(void) unsigned long flags = get_kuap(); set_kuap(AMR_KUAP_BLOCKED); + if (static_branch_unlikely(&uaccess_flush_key)) + do_uaccess_flush(); return flags; } @@ -156,30 +195,9 @@ static inline unsigned long prevent_user_access_return(void) static inline void restore_user_access(unsigned long flags) { set_kuap(flags); + if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED) + do_uaccess_flush(); } - -static inline bool -bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) -{ - return WARN(mmu_has_feature(MMU_FTR_RADIX_KUAP) && - (regs->kuap & (is_write ? AMR_KUAP_BLOCK_WRITE : AMR_KUAP_BLOCK_READ)), - "Bug: %s fault blocked by AMR!", is_write ? "Write" : "Read"); -} -#else /* CONFIG_PPC_KUAP */ -static inline void kuap_restore_amr(struct pt_regs *regs, unsigned long amr) -{ -} - -static inline void kuap_check_amr(void) -{ -} - -static inline unsigned long kuap_get_and_check_amr(void) -{ - return 0; -} -#endif /* CONFIG_PPC_KUAP */ - #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */ diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 83fa88bc9935..1d32b174ab6a 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -144,6 +144,9 @@ RFSCV; \ b rfscv_flush_fallback +#else /* __ASSEMBLY__ */ +/* Prototype for function defined in exceptions-64s.S */ +void do_uaccess_flush(void); #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_EXCEPTION_H */ diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h index 06a48219bbf2..fbd406cd6916 100644 --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -205,6 +205,14 @@ label##3: \ FTR_ENTRY_OFFSET 955b-956b; \ .popsection; +#define UACCESS_FLUSH_FIXUP_SECTION \ +959: \ + .pushsection __uaccess_flush_fixup,"a"; \ + .align 2; \ +960: \ + FTR_ENTRY_OFFSET 959b-960b; \ + .popsection; + #define ENTRY_FLUSH_FIXUP_SECTION \ 957: \ .pushsection __entry_flush_fixup,"a"; \ @@ -248,6 +256,7 @@ extern long stf_barrier_fallback; extern long entry_flush_fallback; extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup; extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup; +extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup; extern long __start___entry_flush_fixup, __stop___entry_flush_fixup; extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup; extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup; diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h index 1d0f7d838b2e..0f5c606ae057 100644 --- a/arch/powerpc/include/asm/kup.h +++ b/arch/powerpc/include/asm/kup.h @@ -53,17 +53,26 @@ static inline void setup_kuep(bool disabled) { } void setup_kuap(bool disabled); #else static inline void setup_kuap(bool disabled) { } + +static inline bool +bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) +{ + return false; +} + +/* + * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush + * the L1D cache after user accesses. Only include the empty stubs for other + * platforms. + */ +#ifndef CONFIG_PPC64 static inline void allow_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { } static inline void prevent_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { } static inline unsigned long prevent_user_access_return(void) { return 0UL; } static inline void restore_user_access(unsigned long flags) { } -static inline bool -bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) -{ - return false; -} +#endif /* CONFIG_PPC64 */ #endif /* CONFIG_PPC_KUAP */ static inline void allow_read_from_user(const void __user *from, unsigned long size) diff --git a/arch/powerpc/include/asm/security_features.h b/arch/powerpc/include/asm/security_features.h index 9e7459d2edca..b774a4477d5f 100644 --- a/arch/powerpc/include/asm/security_features.h +++ b/arch/powerpc/include/asm/security_features.h @@ -89,6 +89,8 @@ static inline bool security_ftr_enabled(u64 feature) // The L1-D cache should be flushed when entering the kernel #define SEC_FTR_L1D_FLUSH_ENTRY 0x0000000000004000ull +// The L1-D cache should be flushed after user accesses from the kernel +#define SEC_FTR_L1D_FLUSH_UACCESS 0x0000000000008000ull // Features enabled by default #define SEC_FTR_DEFAULT \ @@ -96,6 +98,7 @@ static inline bool security_ftr_enabled(u64 feature) SEC_FTR_L1D_FLUSH_PR | \ SEC_FTR_BNDS_CHK_SPEC_BAR | \ SEC_FTR_L1D_FLUSH_ENTRY | \ + SEC_FTR_L1D_FLUSH_UACCESS | \ SEC_FTR_FAVOUR_SECURITY) #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */ diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h index e2fcd3e874f8..a466749703f1 100644 --- a/arch/powerpc/include/asm/setup.h +++ b/arch/powerpc/include/asm/setup.h @@ -60,6 +60,7 @@ void setup_barrier_nospec(void); #else static inline void setup_barrier_nospec(void) { }; #endif +void do_uaccess_flush_fixups(enum l1d_flush_type types); void do_entry_flush_fixups(enum l1d_flush_type types); void do_barrier_nospec_fixups(bool enable); extern bool barrier_nospec_enabled; diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 5577dd887d37..f63a3d3bca3d 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -2951,11 +2951,8 @@ TRAMP_REAL_BEGIN(stf_barrier_fallback) .endr blr -TRAMP_REAL_BEGIN(entry_flush_fallback) - std r9,PACA_EXRFI+EX_R9(r13) - std r10,PACA_EXRFI+EX_R10(r13) - std r11,PACA_EXRFI+EX_R11(r13) - mfctr r9 +/* Clobbers r10, r11, ctr */ +.macro L1D_DISPLACEMENT_FLUSH ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) ld r11,PACA_L1D_FLUSH_SIZE(r13) srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ @@ -2981,7 +2978,14 @@ TRAMP_REAL_BEGIN(entry_flush_fallback) ld r11,(0x80 + 8)*7(r10) addi r10,r10,0x80*8 bdnz 1b +.endm +TRAMP_REAL_BEGIN(entry_flush_fallback) + std r9,PACA_EXRFI+EX_R9(r13) + std r10,PACA_EXRFI+EX_R10(r13) + std r11,PACA_EXRFI+EX_R11(r13) + mfctr r9 + L1D_DISPLACEMENT_FLUSH mtctr r9 ld r9,PACA_EXRFI+EX_R9(r13) ld r10,PACA_EXRFI+EX_R10(r13) @@ -2997,32 +3001,7 @@ TRAMP_REAL_BEGIN(rfi_flush_fallback) std r10,PACA_EXRFI+EX_R10(r13) std r11,PACA_EXRFI+EX_R11(r13) mfctr r9 - ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) - ld r11,PACA_L1D_FLUSH_SIZE(r13) - srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ - mtctr r11 - DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ - - /* order ld/st prior to dcbt stop all streams with flushing */ - sync - - /* - * The load adresses are at staggered offsets within cachelines, - * which suits some pipelines better (on others it should not - * hurt). - */ -1: - ld r11,(0x80 + 8)*0(r10) - ld r11,(0x80 + 8)*1(r10) - ld r11,(0x80 + 8)*2(r10) - ld r11,(0x80 + 8)*3(r10) - ld r11,(0x80 + 8)*4(r10) - ld r11,(0x80 + 8)*5(r10) - ld r11,(0x80 + 8)*6(r10) - ld r11,(0x80 + 8)*7(r10) - addi r10,r10,0x80*8 - bdnz 1b - + L1D_DISPLACEMENT_FLUSH mtctr r9 ld r9,PACA_EXRFI+EX_R9(r13) ld r10,PACA_EXRFI+EX_R10(r13) @@ -3040,32 +3019,7 @@ TRAMP_REAL_BEGIN(hrfi_flush_fallback) std r10,PACA_EXRFI+EX_R10(r13) std r11,PACA_EXRFI+EX_R11(r13) mfctr r9 - ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13) - ld r11,PACA_L1D_FLUSH_SIZE(r13) - srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */ - mtctr r11 - DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */ - - /* order ld/st prior to dcbt stop all streams with flushing */ - sync - - /* - * The load adresses are at staggered offsets within cachelines, - * which suits some pipelines better (on others it should not - * hurt). - */ -1: - ld r11,(0x80 + 8)*0(r10) - ld r11,(0x80 + 8)*1(r10) - ld r11,(0x80 + 8)*2(r10) - ld r11,(0x80 + 8)*3(r10) - ld r11,(0x80 + 8)*4(r10) - ld r11,(0x80 + 8)*5(r10) - ld r11,(0x80 + 8)*6(r10) - ld r11,(0x80 + 8)*7(r10) - addi r10,r10,0x80*8 - bdnz 1b - + L1D_DISPLACEMENT_FLUSH mtctr r9 ld r9,PACA_EXRFI+EX_R9(r13) ld r10,PACA_EXRFI+EX_R10(r13) @@ -3116,8 +3070,21 @@ TRAMP_REAL_BEGIN(rfscv_flush_fallback) RFSCV USE_TEXT_SECTION() - MASKED_INTERRUPT - MASKED_INTERRUPT hsrr=1 + +_GLOBAL(do_uaccess_flush) + UACCESS_FLUSH_FIXUP_SECTION + nop + nop + nop + blr + L1D_DISPLACEMENT_FLUSH + blr +_ASM_NOKPROBE_SYMBOL(do_uaccess_flush) +EXPORT_SYMBOL(do_uaccess_flush) + + +MASKED_INTERRUPT +MASKED_INTERRUPT hsrr=1 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER kvmppc_skip_interrupt: diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 7d447b43ad13..74fd47f46fa5 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -946,8 +946,12 @@ static enum l1d_flush_type enabled_flush_types; static void *l1d_flush_fallback_area; static bool no_rfi_flush; static bool no_entry_flush; +static bool no_uaccess_flush; bool rfi_flush; bool entry_flush; +bool uaccess_flush; +DEFINE_STATIC_KEY_FALSE(uaccess_flush_key); +EXPORT_SYMBOL(uaccess_flush_key); static int __init handle_no_rfi_flush(char *p) { @@ -965,6 +969,14 @@ static int __init handle_no_entry_flush(char *p) } early_param("no_entry_flush", handle_no_entry_flush); +static int __init handle_no_uaccess_flush(char *p) +{ + pr_info("uaccess-flush: disabled on command line."); + no_uaccess_flush = true; + return 0; +} +early_param("no_uaccess_flush", handle_no_uaccess_flush); + /* * The RFI flush is not KPTI, but because users will see doco that says to use * nopti we hijack that option here to also disable the RFI flush. @@ -1008,6 +1020,20 @@ void entry_flush_enable(bool enable) entry_flush = enable; } +void uaccess_flush_enable(bool enable) +{ + if (enable) { + do_uaccess_flush_fixups(enabled_flush_types); + static_branch_enable(&uaccess_flush_key); + on_each_cpu(do_nothing, NULL, 1); + } else { + static_branch_disable(&uaccess_flush_key); + do_uaccess_flush_fixups(L1D_FLUSH_NONE); + } + + uaccess_flush = enable; +} + static void __ref init_fallback_flush(void) { u64 l1d_size, limit; @@ -1079,6 +1105,15 @@ void setup_entry_flush(bool enable) entry_flush_enable(enable); } +void setup_uaccess_flush(bool enable) +{ + if (cpu_mitigations_off()) + return; + + if (!no_uaccess_flush) + uaccess_flush_enable(enable); +} + #ifdef CONFIG_DEBUG_FS static int rfi_flush_set(void *data, u64 val) { @@ -1132,10 +1167,37 @@ static int entry_flush_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n"); +static int uaccess_flush_set(void *data, u64 val) +{ + bool enable; + + if (val == 1) + enable = true; + else if (val == 0) + enable = false; + else + return -EINVAL; + + /* Only do anything if we're changing state */ + if (enable != uaccess_flush) + uaccess_flush_enable(enable); + + return 0; +} + +static int uaccess_flush_get(void *data, u64 *val) +{ + *val = uaccess_flush ? 1 : 0; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n"); + static __init int rfi_flush_debugfs_init(void) { debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush); debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush); + debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL, &fops_uaccess_flush); return 0; } device_initcall(rfi_flush_debugfs_init); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 715ec4d4614a..6db90cdf11da 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -131,6 +131,13 @@ SECTIONS __stop___stf_entry_barrier_fixup = .; } + . = ALIGN(8); + __uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) { + __start___uaccess_flush_fixup = .; + *(__uaccess_flush_fixup) + __stop___uaccess_flush_fixup = .; + } + . = ALIGN(8); __entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) { __start___entry_flush_fixup = .; diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 70e83cfd74aa..321c12a9ef6b 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -234,6 +234,56 @@ void do_stf_barrier_fixups(enum stf_barrier_type types) do_stf_exit_barrier_fixups(types); } +void do_uaccess_flush_fixups(enum l1d_flush_type types) +{ + unsigned int instrs[4], *dest; + long *start, *end; + int i; + + start = PTRRELOC(&__start___uaccess_flush_fixup); + end = PTRRELOC(&__stop___uaccess_flush_fixup); + + instrs[0] = 0x60000000; /* nop */ + instrs[1] = 0x60000000; /* nop */ + instrs[2] = 0x60000000; /* nop */ + instrs[3] = 0x4e800020; /* blr */ + + i = 0; + if (types == L1D_FLUSH_FALLBACK) { + instrs[3] = 0x60000000; /* nop */ + /* fallthrough to fallback flush */ + } + + if (types & L1D_FLUSH_ORI) { + instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */ + instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/ + } + + if (types & L1D_FLUSH_MTTRIG) + instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */ + + for (i = 0; start < end; start++, i++) { + dest = (void *)start + *start; + + pr_devel("patching dest %lx\n", (unsigned long)dest); + + patch_instruction((struct ppc_inst *)dest, ppc_inst(instrs[0])); + + patch_instruction((struct ppc_inst *)(dest + 1), ppc_inst(instrs[1])); + patch_instruction((struct ppc_inst *)(dest + 2), ppc_inst(instrs[2])); + patch_instruction((struct ppc_inst *)(dest + 3), ppc_inst(instrs[3])); + } + + printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i, + (types == L1D_FLUSH_NONE) ? "no" : + (types == L1D_FLUSH_FALLBACK) ? "fallback displacement" : + (types & L1D_FLUSH_ORI) ? (types & L1D_FLUSH_MTTRIG) + ? "ori+mttrig type" + : "ori type" : + (types & L1D_FLUSH_MTTRIG) ? "mttrig type" + : "unknown"); +} + void do_entry_flush_fixups(enum l1d_flush_type types) { unsigned int instrs[3], *dest; diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index d04a085c423d..087ec92acfc4 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -124,10 +124,12 @@ static void pnv_setup_rfi_flush(void) /* * If we are non-Power9 bare metal, we don't need to flush on kernel - * entry: it fixes a P9 specific vulnerability. + * entry or after user access: they fix a P9 specific vulnerability. */ - if (!pvr_version_is(PVR_POWER9)) + if (!pvr_version_is(PVR_POWER9)) { security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY); + security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS); + } enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) || \ @@ -139,6 +141,10 @@ static void pnv_setup_rfi_flush(void) enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); setup_entry_flush(enable); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); + setup_uaccess_flush(enable); } static void __init pnv_check_guarded_cores(void) diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 8136c5368ee4..3617cdb079f6 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -583,6 +583,10 @@ void pseries_setup_rfi_flush(void) enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); setup_entry_flush(enable); + + enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && + security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); + setup_uaccess_flush(enable); } #ifdef CONFIG_PCI_IOV -- cgit v1.2.3-58-ga151 From 178d52c6e89c38d0553b0ac8b99927b11eb995b0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 19 Nov 2020 23:43:53 +1100 Subject: powerpc: Only include kup-radix.h for 64-bit Book3S In kup.h we currently include kup-radix.h for all 64-bit builds, which includes Book3S and Book3E. The latter doesn't make sense, Book3E never uses the Radix MMU. This has worked up until now, but almost by accident, and the recent uaccess flush changes introduced a build breakage on Book3E because of the bad structure of the code. So disentangle things so that we only use kup-radix.h for Book3S. This requires some more stubs in kup.h and fixing an include in syscall_64.c. Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/book3s/64/kup-radix.h | 4 ++-- arch/powerpc/include/asm/kup.h | 11 ++++++++--- arch/powerpc/kernel/syscall_64.c | 2 +- 3 files changed, 11 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/include/asm/book3s/64/kup-radix.h b/arch/powerpc/include/asm/book3s/64/kup-radix.h index 97c2394e7dea..28716e2f13e3 100644 --- a/arch/powerpc/include/asm/book3s/64/kup-radix.h +++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h @@ -27,6 +27,7 @@ #endif .endm +#ifdef CONFIG_PPC_KUAP .macro kuap_check_amr gpr1, gpr2 #ifdef CONFIG_PPC_KUAP_DEBUG BEGIN_MMU_FTR_SECTION_NESTED(67) @@ -38,6 +39,7 @@ END_MMU_FTR_SECTION_NESTED_IFSET(MMU_FTR_RADIX_KUAP, 67) #endif .endm +#endif .macro kuap_save_amr_and_lock gpr1, gpr2, use_cr, msr_pr_cr #ifdef CONFIG_PPC_KUAP @@ -148,8 +150,6 @@ static inline unsigned long kuap_get_and_check_amr(void) return 0UL; } -static inline void kuap_check_amr(void) { } - static inline unsigned long get_kuap(void) { return AMR_KUAP_BLOCKED; diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h index 0f5c606ae057..0d93331d0fab 100644 --- a/arch/powerpc/include/asm/kup.h +++ b/arch/powerpc/include/asm/kup.h @@ -14,7 +14,7 @@ #define KUAP_CURRENT_WRITE 8 #define KUAP_CURRENT (KUAP_CURRENT_READ | KUAP_CURRENT_WRITE) -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_BOOK3S_64 #include #endif #ifdef CONFIG_PPC_8xx @@ -35,6 +35,9 @@ .macro kuap_check current, gpr .endm +.macro kuap_check_amr gpr1, gpr2 +.endm + #endif #else /* !__ASSEMBLY__ */ @@ -60,19 +63,21 @@ bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write) return false; } +static inline void kuap_check_amr(void) { } + /* * book3s/64/kup-radix.h defines these functions for the !KUAP case to flush * the L1D cache after user accesses. Only include the empty stubs for other * platforms. */ -#ifndef CONFIG_PPC64 +#ifndef CONFIG_PPC_BOOK3S_64 static inline void allow_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { } static inline void prevent_user_access(void __user *to, const void __user *from, unsigned long size, unsigned long dir) { } static inline unsigned long prevent_user_access_return(void) { return 0UL; } static inline void restore_user_access(unsigned long flags) { } -#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC_BOOK3S_64 */ #endif /* CONFIG_PPC_KUAP */ static inline void allow_read_from_user(const void __user *from, unsigned long size) diff --git a/arch/powerpc/kernel/syscall_64.c b/arch/powerpc/kernel/syscall_64.c index 8e50818aa50b..310bcd768cd5 100644 --- a/arch/powerpc/kernel/syscall_64.c +++ b/arch/powerpc/kernel/syscall_64.c @@ -2,7 +2,7 @@ #include #include -#include +#include #include #include #include -- cgit v1.2.3-58-ga151 From da631f7fd623b6c180c8d93a93040d1e0d61291f Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 17 Nov 2020 16:59:16 +1100 Subject: powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations pseries|pnv_setup_rfi_flush already does the count cache flush setup, and we just added entry and uaccess flushes. So the name is not very accurate any more. In both platforms we then also immediately setup the STF flush. Rename them to _setup_security_mitigations and fold the STF flush in. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman --- arch/powerpc/platforms/powernv/setup.c | 7 ++++--- arch/powerpc/platforms/pseries/mobility.c | 4 ++-- arch/powerpc/platforms/pseries/pseries.h | 2 +- arch/powerpc/platforms/pseries/setup.c | 7 ++++--- 4 files changed, 11 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 087ec92acfc4..46115231a3b2 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -98,7 +98,7 @@ static void init_fw_feat_flags(struct device_node *np) security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); } -static void pnv_setup_rfi_flush(void) +static void pnv_setup_security_mitigations(void) { struct device_node *np, *fw_features; enum l1d_flush_type type; @@ -145,6 +145,8 @@ static void pnv_setup_rfi_flush(void) enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); setup_uaccess_flush(enable); + + setup_stf_barrier(); } static void __init pnv_check_guarded_cores(void) @@ -173,8 +175,7 @@ static void __init pnv_setup_arch(void) { set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT); - pnv_setup_rfi_flush(); - setup_stf_barrier(); + pnv_setup_security_mitigations(); /* Initialize SMP */ pnv_smp_init(); diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c index d6f4162478a5..2f73cb5bf12d 100644 --- a/arch/powerpc/platforms/pseries/mobility.c +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -349,8 +349,8 @@ void post_mobility_fixup(void) cpus_read_unlock(); - /* Possibly switch to a new RFI flush type */ - pseries_setup_rfi_flush(); + /* Possibly switch to a new L1 flush type */ + pseries_setup_security_mitigations(); /* Reinitialise system information for hv-24x7 */ read_24x7_sys_info(); diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 13fa370a87e4..593840847cd3 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -111,7 +111,7 @@ static inline unsigned long cmo_get_page_size(void) int dlpar_workqueue_init(void); -void pseries_setup_rfi_flush(void); +void pseries_setup_security_mitigations(void); void pseries_lpar_read_hblkrm_characteristics(void); #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 3617cdb079f6..090c13f6c881 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -542,7 +542,7 @@ static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); } -void pseries_setup_rfi_flush(void) +void pseries_setup_security_mitigations(void) { struct h_cpu_char_result result; enum l1d_flush_type types; @@ -587,6 +587,8 @@ void pseries_setup_rfi_flush(void) enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); setup_uaccess_flush(enable); + + setup_stf_barrier(); } #ifdef CONFIG_PCI_IOV @@ -776,8 +778,7 @@ static void __init pSeries_setup_arch(void) fwnmi_init(); - pseries_setup_rfi_flush(); - setup_stf_barrier(); + pseries_setup_security_mitigations(); pseries_lpar_read_hblkrm_characteristics(); /* By default, only probe PCI (can be overridden by rtas_pci) */ -- cgit v1.2.3-58-ga151