From 1db0287ab186637488e51ae43109692624f2d5a3 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 16 Oct 2013 21:10:54 +0200 Subject: ARM: s3c64xx: Add support for DMA using generic amba-pl08x driver This patch adds all required platform-specific data and initialization code to support the generic amba-pl08x driver on S3C64xx SoCs. Also some compatibility definitions are added to make the transition from legacy API to DMA engine easier. The biggest hack here is passing const char * pointers through DMA resource, casted to unsigned long, but this is how Samsung DMA wrappers (used to support both s3c-dma and DMA engine in drivers) are designed. Signed-off-by: Tomasz Figa Signed-off-by: Mark Brown --- arch/arm/Kconfig | 1 + arch/arm/mach-s3c64xx/Kconfig | 8 +- arch/arm/mach-s3c64xx/Makefile | 1 + arch/arm/mach-s3c64xx/common.h | 5 + arch/arm/mach-s3c64xx/include/mach/dma.h | 63 ++++++++ arch/arm/mach-s3c64xx/pl080.c | 244 +++++++++++++++++++++++++++++++ arch/arm/plat-samsung/devs.c | 10 +- arch/arm/plat-samsung/dma-ops.c | 8 +- 8 files changed, 336 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-s3c64xx/pl080.c (limited to 'arch') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c1f1a7eee953..ba0e23234ecf 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -723,6 +723,7 @@ config ARCH_S3C64XX bool "Samsung S3C64XX" select ARCH_HAS_CPUFREQ select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 2cb8dc55b50e..d8e0288bf2bf 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -17,9 +17,15 @@ config CPU_S3C6410 help Enable S3C6410 CPU support +config S3C64XX_PL080 + bool "S3C64XX DMA using generic PL08x driver" + select AMBA_PL08X + select SAMSUNG_DMADEV + config S3C64XX_DMA - bool "S3C64XX DMA" + bool "S3C64XX DMA using legacy S3C DMA API" select S3C_DMA + depends on !S3C64XX_PL080 config S3C64XX_SETUP_SDHCI bool diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 6faedcffce04..e8e9a468cbc9 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support obj-$(CONFIG_S3C64XX_DMA) += dma.o +obj-$(CONFIG_S3C64XX_PL080) += pl080.o # Device support diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index bd3bd562011e..7043e7a3a67e 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void); static inline int s3c64xx_pm_late_initcall(void) { return 0; } #endif +#ifdef CONFIG_S3C64XX_PL080 +extern struct pl08x_platform_data s3c64xx_dma0_plat_data; +extern struct pl08x_platform_data s3c64xx_dma1_plat_data; +#endif + #endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index fe1a98cf0e4c..26a6bc300589 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ +#ifdef CONFIG_S3C64XX_DMA + #define S3C_DMA_CHANNELS (16) /* see mach-s3c2410/dma.h for notes on dma channel numbers */ @@ -128,4 +130,65 @@ struct s3c2410_dma_chan { #include +#else + +#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) + +/* DMA0/SDMA0 */ +#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx") +#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx") +#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx") +#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx") +#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx") +#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx") +#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx") +#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx") +#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx") +#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx") +#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx") +#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx") +#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx") +#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx") +#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx") +#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx") + +/* DMA1/SDMA1 */ +#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx") +#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx") +#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx") +#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx") +#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx") +#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx") +#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out") +#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in") +#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic") +#define DMACH_PWM S3C64XX_DMA_CHAN("pwm") +#define DMACH_IRDA S3C64XX_DMA_CHAN("irda") +#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external") +#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx") +#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx") + +enum dma_ch { + DMACH_MAX = 32 +}; + +struct s3c2410_dma_client { + char *name; +}; + +static inline bool samsung_dma_has_circular(void) +{ + return true; +} + +static inline bool samsung_dma_is_dmadev(void) +{ + return true; +} + +#include +#include + +#endif + #endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c new file mode 100644 index 000000000000..901a984bddc2 --- /dev/null +++ b/arch/arm/mach-s3c64xx/pl080.c @@ -0,0 +1,244 @@ +/* + * Samsung's S3C64XX generic DMA support using amba-pl08x driver. + * + * Copyright (c) 2013 Tomasz Figa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "regs-sys.h" + +static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd) +{ + return cd->min_signal; +} + +static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch) +{ +} + +/* + * DMA0 + */ + +static struct pl08x_channel_data s3c64xx_dma0_info[] = { + { + .bus_id = "uart0_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart0_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_tx", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart3_rx", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_tx", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm0_rx", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_tx", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s0_rx", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_tx", + .min_signal = 12, + .max_signal = 12, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi0_rx", + .min_signal = 13, + .max_signal = 13, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_tx", + .min_signal = 14, + .max_signal = 14, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s2_rx", + .min_signal = 15, + .max_signal = 15, + .periph_buses = PL08X_AHB2, + } +}; + +struct pl08x_platform_data s3c64xx_dma0_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma0_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0, + 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data); + +/* + * DMA1 + */ + +static struct pl08x_channel_data s3c64xx_dma1_info[] = { + { + .bus_id = "pcm1_tx", + .min_signal = 0, + .max_signal = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pcm1_rx", + .min_signal = 1, + .max_signal = 1, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_tx", + .min_signal = 2, + .max_signal = 2, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s1_rx", + .min_signal = 3, + .max_signal = 3, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_tx", + .min_signal = 4, + .max_signal = 4, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "spi1_rx", + .min_signal = 5, + .max_signal = 5, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_out", + .min_signal = 6, + .max_signal = 6, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_in", + .min_signal = 7, + .max_signal = 7, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ac97_mic", + .min_signal = 8, + .max_signal = 8, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "pwm", + .min_signal = 9, + .max_signal = 9, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "irda", + .min_signal = 10, + .max_signal = 10, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "external", + .min_signal = 11, + .max_signal = 11, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data s3c64xx_dma1_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT | + PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl08x_get_xfer_signal, + .put_xfer_signal = pl08x_put_xfer_signal, + .slave_channels = s3c64xx_dma1_info, + .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info), +}; + +static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0, + 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data); + +static int __init s3c64xx_pl080_init(void) +{ + /* Set all DMA configuration to be DMA, not SDMA */ + writel(0xffffff, S3C64XX_SDMA_SEL); + + if (of_have_populated_dt()) + return 0; + + amba_device_register(&s3c64xx_dma0_device, &iomem_resource); + amba_device_register(&s3c64xx_dma1_device, &iomem_resource); + + return 0; +} +arch_initcall(s3c64xx_pl080_init); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 99a3590f0349..ac07e871f6a7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -1468,6 +1468,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; #if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #elif defined(CONFIG_S3C24XX_DMAC) pd.filter = s3c24xx_dma_filter; #endif @@ -1509,8 +1511,10 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1); @@ -1550,8 +1554,10 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C64XX_PL080) + pd.filter = pl08x_filter_id; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2); diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c index ec0d731b0e7b..886326ee6f6c 100644 --- a/arch/arm/plat-samsung/dma-ops.c +++ b/arch/arm/plat-samsung/dma-ops.c @@ -18,6 +18,12 @@ #include +#if defined(CONFIG_PL330_DMA) +#define dma_filter pl330_filter +#elif defined(CONFIG_S3C64XX_PL080) +#define dma_filter pl08x_filter_id +#endif + static unsigned samsung_dmadev_request(enum dma_ch dma_ch, struct samsung_dma_req *param, struct device *dev, char *ch_name) @@ -30,7 +36,7 @@ static unsigned samsung_dmadev_request(enum dma_ch dma_ch, if (dev->of_node) return (unsigned)dma_request_slave_channel(dev, ch_name); else - return (unsigned)dma_request_channel(mask, pl330_filter, + return (unsigned)dma_request_channel(mask, dma_filter, (void *)dma_ch); } -- cgit v1.2.3-58-ga151 From 15469ed37f8a9c004ac537495f9f7c51790a80c0 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 16 Oct 2013 21:10:56 +0200 Subject: ARM: s3c64xx: Remove legacy DMA driver Since support for generic PL08x DMA engine driver has been added, there is no need to keep the old legacy driver, so this patch removes it. Signed-off-by: Tomasz Figa Signed-off-by: Mark Brown --- arch/arm/mach-s3c64xx/Kconfig | 5 - arch/arm/mach-s3c64xx/Makefile | 1 - arch/arm/mach-s3c64xx/dma.c | 762 ------------------------------- arch/arm/mach-s3c64xx/include/mach/dma.h | 123 ----- 4 files changed, 891 deletions(-) delete mode 100644 arch/arm/mach-s3c64xx/dma.c (limited to 'arch') diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index d8e0288bf2bf..7094bccbae91 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -22,11 +22,6 @@ config S3C64XX_PL080 select AMBA_PL08X select SAMSUNG_DMADEV -config S3C64XX_DMA - bool "S3C64XX DMA using legacy S3C DMA API" - select S3C_DMA - depends on !S3C64XX_PL080 - config S3C64XX_SETUP_SDHCI bool select S3C64XX_SETUP_SDHCI_GPIO diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index e8e9a468cbc9..58069a702a43 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o # DMA support -obj-$(CONFIG_S3C64XX_DMA) += dma.o obj-$(CONFIG_S3C64XX_PL080) += pl080.o # Device support diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c deleted file mode 100644 index 7e22c2113816..000000000000 --- a/arch/arm/mach-s3c64xx/dma.c +++ /dev/null @@ -1,762 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/dma.c - * - * Copyright 2009 Openmoko, Inc. - * Copyright 2009 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * S3C64XX DMA core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* - * NOTE: Code in this file is not used when booting with Device Tree support. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "regs-sys.h" - -/* dma channel state information */ - -struct s3c64xx_dmac { - struct device dev; - struct clk *clk; - void __iomem *regs; - struct s3c2410_dma_chan *channels; - enum dma_ch chanbase; -}; - -/* pool to provide LLI buffers */ -static struct dma_pool *dma_pool; - -/* Debug configuration and code */ - -static unsigned char debug_show_buffs = 0; - -static void dbg_showchan(struct s3c2410_dma_chan *chan) -{ - pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n", - chan->number, - readl(chan->regs + PL080_CH_SRC_ADDR), - readl(chan->regs + PL080_CH_DST_ADDR), - readl(chan->regs + PL080_CH_LLI), - readl(chan->regs + PL080_CH_CONTROL), - readl(chan->regs + PL080S_CH_CONTROL2), - readl(chan->regs + PL080S_CH_CONFIG)); -} - -static void show_lli(struct pl080s_lli *lli) -{ - pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n", - lli, lli->src_addr, lli->dst_addr, lli->next_lli, - lli->control0, lli->control1); -} - -static void dbg_showbuffs(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *ptr; - struct s3c64xx_dma_buff *end; - - pr_debug("DMA%d: buffs next %p, curr %p, end %p\n", - chan->number, chan->next, chan->curr, chan->end); - - ptr = chan->next; - end = chan->end; - - if (debug_show_buffs) { - for (; ptr != NULL; ptr = ptr->next) { - pr_debug("DMA%d: %08x ", - chan->number, ptr->lli_dma); - show_lli(ptr->lli); - } - } -} - -/* End of Debug */ - -static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel) -{ - struct s3c2410_dma_chan *chan; - unsigned int start, offs; - - start = 0; - - if (channel >= DMACH_PCM1_TX) - start = 8; - - for (offs = 0; offs < 8; offs++) { - chan = &s3c2410_chans[start + offs]; - if (!chan->in_use) - goto found; - } - - return NULL; - -found: - s3c_dma_chan_map[channel] = chan; - return chan; -} - -int s3c2410_dma_config(enum dma_ch channel, int xferunit) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - if (chan == NULL) - return -EINVAL; - - switch (xferunit) { - case 1: - chan->hw_width = 0; - break; - case 2: - chan->hw_width = 1; - break; - case 4: - chan->hw_width = 2; - break; - default: - printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_config); - -static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli, - dma_addr_t data, int size) -{ - dma_addr_t src, dst; - u32 control0, control1; - - switch (chan->source) { - case DMA_FROM_DEVICE: - src = chan->dev_addr; - dst = data; - control0 = PL080_CONTROL_SRC_AHB2; - control0 |= PL080_CONTROL_DST_INCR; - break; - - case DMA_TO_DEVICE: - src = data; - dst = chan->dev_addr; - control0 = PL080_CONTROL_DST_AHB2; - control0 |= PL080_CONTROL_SRC_INCR; - break; - default: - BUG(); - } - - /* note, we do not currently setup any of the burst controls */ - - control1 = size >> chan->hw_width; /* size in no of xfers */ - control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ - control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - - lli->src_addr = src; - lli->dst_addr = dst; - lli->next_lli = 0; - lli->control0 = control0; - lli->control1 = control1; -} - -static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan, - struct pl080s_lli *lli) -{ - void __iomem *regs = chan->regs; - - pr_debug("%s: LLI %p => regs\n", __func__, lli); - show_lli(lli); - - writel(lli->src_addr, regs + PL080_CH_SRC_ADDR); - writel(lli->dst_addr, regs + PL080_CH_DST_ADDR); - writel(lli->next_lli, regs + PL080_CH_LLI); - writel(lli->control0, regs + PL080_CH_CONTROL); - writel(lli->control1, regs + PL080S_CH_CONTROL2); -} - -static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dmac *dmac = chan->dmac; - u32 config; - u32 bit = chan->bit; - - dbg_showchan(chan); - - pr_debug("%s: clearing interrupts\n", __func__); - - /* clear interrupts */ - writel(bit, dmac->regs + PL080_TC_CLEAR); - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - pr_debug("%s: starting channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_ENABLE; - config &= ~PL080_CONFIG_HALT; - - pr_debug("%s: writing config %08x\n", __func__, config); - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan) -{ - u32 config; - int timeout; - - pr_debug("%s: stopping channel\n", __func__); - - dbg_showchan(chan); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config |= PL080_CONFIG_HALT; - writel(config, chan->regs + PL080S_CH_CONFIG); - - timeout = 1000; - do { - config = readl(chan->regs + PL080S_CH_CONFIG); - pr_debug("%s: %d - config %08x\n", __func__, timeout, config); - if (config & PL080_CONFIG_ACTIVE) - udelay(10); - else - break; - } while (--timeout > 0); - - if (config & PL080_CONFIG_ACTIVE) { - printk(KERN_ERR "%s: channel still active\n", __func__); - return -EFAULT; - } - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} - -static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan, - struct s3c64xx_dma_buff *buf, - enum s3c2410_dma_buffresult result) -{ - if (chan->callback_fn != NULL) - (chan->callback_fn)(chan, buf->pw, 0, result); -} - -static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff) -{ - dma_pool_free(dma_pool, buff->lli, buff->lli_dma); - kfree(buff); -} - -static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) -{ - struct s3c64xx_dma_buff *buff, *next; - u32 config; - - dbg_showchan(chan); - - pr_debug("%s: flushing channel\n", __func__); - - config = readl(chan->regs + PL080S_CH_CONFIG); - config &= ~PL080_CONFIG_ENABLE; - writel(config, chan->regs + PL080S_CH_CONFIG); - - /* dump all the buffers associated with this channel */ - - for (buff = chan->curr; buff != NULL; buff = next) { - next = buff->next; - pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next); - - s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT); - s3c64xx_dma_freebuff(buff); - } - - chan->curr = chan->next = chan->end = NULL; - - return 0; -} - -int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - switch (op) { - case S3C2410_DMAOP_START: - return s3c64xx_dma_start(chan); - - case S3C2410_DMAOP_STOP: - return s3c64xx_dma_stop(chan); - - case S3C2410_DMAOP_FLUSH: - return s3c64xx_dma_flush(chan); - - /* believe PAUSE/RESUME are no-ops */ - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - case S3C2410_DMAOP_STARTED: - case S3C2410_DMAOP_TIMEOUT: - return 0; - } - - return -ENOENT; -} -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -/* s3c2410_dma_enque - * - */ - -int s3c2410_dma_enqueue(enum dma_ch channel, void *id, - dma_addr_t data, int size) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - struct s3c64xx_dma_buff *next; - struct s3c64xx_dma_buff *buff; - struct pl080s_lli *lli; - unsigned long flags; - int ret; - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC); - if (!buff) { - printk(KERN_ERR "%s: no memory for buffer\n", __func__); - return -ENOMEM; - } - - lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma); - if (!lli) { - printk(KERN_ERR "%s: no memory for lli\n", __func__); - ret = -ENOMEM; - goto err_buff; - } - - pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n", - __func__, buff, data, lli, (u32)buff->lli_dma, size); - - buff->lli = lli; - buff->pw = id; - - s3c64xx_dma_fill_lli(chan, lli, data, size); - - local_irq_save(flags); - - if ((next = chan->next) != NULL) { - struct s3c64xx_dma_buff *end = chan->end; - struct pl080s_lli *endlli = end->lli; - - pr_debug("enquing onto channel\n"); - - end->next = buff; - endlli->next_lli = buff->lli_dma; - - if (chan->flags & S3C2410_DMAF_CIRCULAR) { - struct s3c64xx_dma_buff *curr = chan->curr; - lli->next_lli = curr->lli_dma; - } - - if (next == chan->curr) { - writel(buff->lli_dma, chan->regs + PL080_CH_LLI); - chan->next = buff; - } - - show_lli(endlli); - chan->end = buff; - } else { - pr_debug("enquing onto empty channel\n"); - - chan->curr = buff; - chan->next = buff; - chan->end = buff; - - s3c64xx_lli_to_regs(chan, lli); - } - - local_irq_restore(flags); - - show_lli(lli); - - dbg_showchan(chan); - dbg_showbuffs(chan); - return 0; - -err_buff: - kfree(buff); - return ret; -} - -EXPORT_SYMBOL(s3c2410_dma_enqueue); - - -int s3c2410_dma_devconfig(enum dma_ch channel, - enum dma_data_direction source, - unsigned long devaddr) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - u32 peripheral; - u32 config = 0; - - pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n", - __func__, channel, source, devaddr, chan); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - peripheral = (chan->peripheral & 0xf); - chan->source = source; - chan->dev_addr = devaddr; - - pr_debug("%s: peripheral %d\n", __func__, peripheral); - - switch (source) { - case DMA_FROM_DEVICE: - config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; - break; - case DMA_TO_DEVICE: - config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; - config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; - break; - default: - printk(KERN_ERR "%s: bad source\n", __func__); - return -EINVAL; - } - - /* allow TC and ERR interrupts */ - config |= PL080_CONFIG_TC_IRQ_MASK; - config |= PL080_CONFIG_ERR_IRQ_MASK; - - pr_debug("%s: config %08x\n", __func__, config); - - writel(config, chan->regs + PL080S_CH_CONFIG); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_devconfig); - - -int s3c2410_dma_getposition(enum dma_ch channel, - dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - - WARN_ON(!chan); - if (!chan) - return -EINVAL; - - if (src != NULL) - *src = readl(chan->regs + PL080_CH_SRC_ADDR); - - if (dst != NULL) - *dst = readl(chan->regs + PL080_CH_DST_ADDR); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_getposition); - -/* s3c2410_request_dma - * - * get control of an dma channel -*/ - -int s3c2410_dma_request(enum dma_ch channel, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c2410_dma_chan *chan; - unsigned long flags; - - pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", - channel, client->name, dev); - - local_irq_save(flags); - - chan = s3c64xx_dma_map_channel(channel); - if (chan == NULL) { - local_irq_restore(flags); - return -EBUSY; - } - - dbg_showchan(chan); - - chan->client = client; - chan->in_use = 1; - chan->peripheral = channel; - chan->flags = 0; - - local_irq_restore(flags); - - /* need to setup */ - - pr_debug("%s: channel initialised, %p\n", __func__, chan); - - return chan->number | DMACH_LOW_LEVEL; -} - -EXPORT_SYMBOL(s3c2410_dma_request); - -/* s3c2410_dma_free - * - * release the given channel back to the system, will stop and flush - * any outstanding transfers, and ensure the channel is ready for the - * next claimant. - * - * Note, although a warning is currently printed if the freeing client - * info is not the same as the registrant's client info, the free is still - * allowed to go through. -*/ - -int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) -{ - struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); - unsigned long flags; - - if (chan == NULL) - return -EINVAL; - - local_irq_save(flags); - - if (chan->client != client) { - printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", - channel, chan->client, client); - } - - /* sort out stopping and freeing the channel */ - - - chan->client = NULL; - chan->in_use = 0; - - if (!(channel & DMACH_LOW_LEVEL)) - s3c_dma_chan_map[channel] = NULL; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_dma_free); - -static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) -{ - struct s3c64xx_dmac *dmac = pw; - struct s3c2410_dma_chan *chan; - enum s3c2410_dma_buffresult res; - u32 tcstat, errstat; - u32 bit; - int offs; - - tcstat = readl(dmac->regs + PL080_TC_STATUS); - errstat = readl(dmac->regs + PL080_ERR_STATUS); - - for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { - struct s3c64xx_dma_buff *buff; - - if (!(errstat & bit) && !(tcstat & bit)) - continue; - - chan = dmac->channels + offs; - res = S3C2410_RES_ERR; - - if (tcstat & bit) { - writel(bit, dmac->regs + PL080_TC_CLEAR); - res = S3C2410_RES_OK; - } - - if (errstat & bit) - writel(bit, dmac->regs + PL080_ERR_CLEAR); - - /* 'next' points to the buffer that is next to the - * currently active buffer. - * For CIRCULAR queues, 'next' will be same as 'curr' - * when 'end' is the active buffer. - */ - buff = chan->curr; - while (buff && buff != chan->next - && buff->next != chan->next) - buff = buff->next; - - if (!buff) - BUG(); - - if (buff == chan->next) - buff = chan->end; - - s3c64xx_dma_bufffdone(chan, buff, res); - - /* Free the node and update curr, if non-circular queue */ - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { - chan->curr = buff->next; - s3c64xx_dma_freebuff(buff); - } - - /* Update 'next' */ - buff = chan->next; - if (chan->next == chan->end) { - chan->next = chan->curr; - if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) - chan->end = NULL; - } else { - chan->next = buff->next; - } - } - - return IRQ_HANDLED; -} - -static struct bus_type dma_subsys = { - .name = "s3c64xx-dma", - .dev_name = "s3c64xx-dma", -}; - -static int s3c64xx_dma_init1(int chno, enum dma_ch chbase, - int irq, unsigned int base) -{ - struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno]; - struct s3c64xx_dmac *dmac; - char clkname[16]; - void __iomem *regs; - void __iomem *regptr; - int err, ch; - - dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL); - if (!dmac) { - printk(KERN_ERR "%s: failed to alloc mem\n", __func__); - return -ENOMEM; - } - - dmac->dev.id = chno / 8; - dmac->dev.bus = &dma_subsys; - - err = device_register(&dmac->dev); - if (err) { - printk(KERN_ERR "%s: failed to register device\n", __func__); - goto err_alloc; - } - - regs = ioremap(base, 0x200); - if (!regs) { - printk(KERN_ERR "%s: failed to ioremap()\n", __func__); - err = -ENXIO; - goto err_dev; - } - - snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id); - - dmac->clk = clk_get(NULL, clkname); - if (IS_ERR(dmac->clk)) { - printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname); - err = PTR_ERR(dmac->clk); - goto err_map; - } - - clk_prepare_enable(dmac->clk); - - dmac->regs = regs; - dmac->chanbase = chbase; - dmac->channels = chptr; - - err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac); - if (err < 0) { - printk(KERN_ERR "%s: failed to get irq\n", __func__); - goto err_clk; - } - - regptr = regs + PL080_Cx_BASE(0); - - for (ch = 0; ch < 8; ch++, chptr++) { - pr_debug("%s: registering DMA %d (%p)\n", - __func__, chno + ch, regptr); - - chptr->bit = 1 << ch; - chptr->number = chno + ch; - chptr->dmac = dmac; - chptr->regs = regptr; - regptr += PL080_Cx_STRIDE; - } - - /* for the moment, permanently enable the controller */ - writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG); - - printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n", - irq, regs, chno, chno+8); - - return 0; - -err_clk: - clk_disable_unprepare(dmac->clk); - clk_put(dmac->clk); -err_map: - iounmap(regs); -err_dev: - device_unregister(&dmac->dev); -err_alloc: - kfree(dmac); - return err; -} - -static int __init s3c64xx_dma_init(void) -{ - int ret; - - /* This driver is not supported when booting with device tree. */ - if (of_have_populated_dt()) - return -ENODEV; - - printk(KERN_INFO "%s: Registering DMA channels\n", __func__); - - dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0); - if (!dma_pool) { - printk(KERN_ERR "%s: failed to create pool\n", __func__); - return -ENOMEM; - } - - ret = subsys_system_register(&dma_subsys, NULL); - if (ret) { - printk(KERN_ERR "%s: failed to create subsys\n", __func__); - return -ENOMEM; - } - - /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C64XX_SDMA_SEL); - - /* Register standard DMA controllers */ - s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); - s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000); - - return 0; -} - -arch_initcall(s3c64xx_dma_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 26a6bc300589..059b1fc85037 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -11,127 +11,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#ifdef CONFIG_S3C64XX_DMA - -#define S3C_DMA_CHANNELS (16) - -/* see mach-s3c2410/dma.h for notes on dma channel numbers */ - -/* Note, for the S3C64XX architecture we keep the DMACH_ - * defines in the order they are allocated to [S]DMA0/[S]DMA1 - * so that is easy to do DHACH_ -> DMA controller conversion - */ -enum dma_ch { - /* DMA0/SDMA0 */ - DMACH_UART0 = 0, - DMACH_UART0_SRC2, - DMACH_UART1, - DMACH_UART1_SRC2, - DMACH_UART2, - DMACH_UART2_SRC2, - DMACH_UART3, - DMACH_UART3_SRC2, - DMACH_PCM0_TX, - DMACH_PCM0_RX, - DMACH_I2S0_OUT, - DMACH_I2S0_IN, - DMACH_SPI0_TX, - DMACH_SPI0_RX, - DMACH_HSI_I2SV40_TX, - DMACH_HSI_I2SV40_RX, - - /* DMA1/SDMA1 */ - DMACH_PCM1_TX = 16, - DMACH_PCM1_RX, - DMACH_I2S1_OUT, - DMACH_I2S1_IN, - DMACH_SPI1_TX, - DMACH_SPI1_RX, - DMACH_AC97_PCMOUT, - DMACH_AC97_PCMIN, - DMACH_AC97_MICIN, - DMACH_PWM, - DMACH_IRDA, - DMACH_EXTERNAL, - DMACH_RES1, - DMACH_RES2, - DMACH_SECURITY_RX, /* SDMA1 only */ - DMACH_SECURITY_TX, /* SDMA1 only */ - DMACH_MAX /* the end */ -}; - -static inline bool samsung_dma_has_circular(void) -{ - return true; -} - -static inline bool samsung_dma_is_dmadev(void) -{ - return false; -} -#define S3C2410_DMAF_CIRCULAR (1 << 0) - -#include - -#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ - -struct s3c64xx_dma_buff; - -/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor - * @next: Pointer to next buffer in queue or ring. - * @pw: Client provided identifier - * @lli: Pointer to hardware descriptor this buffer is associated with. - * @lli_dma: Hardare address of the descriptor. - */ -struct s3c64xx_dma_buff { - struct s3c64xx_dma_buff *next; - - void *pw; - struct pl080s_lli *lli; - dma_addr_t lli_dma; -}; - -struct s3c64xx_dmac; - -struct s3c2410_dma_chan { - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char bit; /* bit for enable/disable/etc */ - unsigned char hw_width; - unsigned char peripheral; - - unsigned int flags; - enum dma_data_direction source; - - - dma_addr_t dev_addr; - - struct s3c2410_dma_client *client; - struct s3c64xx_dmac *dmac; /* pointer to controller */ - - void __iomem *regs; - - /* cdriver callbacks */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel op callback */ - - /* buffer list and information */ - struct s3c64xx_dma_buff *curr; /* current dma buffer */ - struct s3c64xx_dma_buff *next; /* next buffer to load */ - struct s3c64xx_dma_buff *end; /* end of queue */ - - /* note, when channel is running in circular mode, curr is the - * first buffer enqueued, end is the last and curr is where the - * last buffer-done event is set-at. The buffers are not freed - * and the last buffer hardware descriptor points back to the - * first. - */ -}; - -#include - -#else - #define S3C64XX_DMA_CHAN(name) ((unsigned long)(name)) /* DMA0/SDMA0 */ @@ -189,6 +68,4 @@ static inline bool samsung_dma_is_dmadev(void) #include #include -#endif - #endif /* __ASM_ARCH_IRQ_H */ -- cgit v1.2.3-58-ga151 From 0475680b5c2ef4bbdc3af1f6cfd014ea08c8d981 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 19 Dec 2013 15:54:58 +0000 Subject: ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion Signed-off-by: Lee Jones Acked-by: Linus Walleij Signed-off-by: Mark Brown --- arch/arm/mach-ux500/board-mop500-audio.c | 8 ++++---- include/linux/platform_data/asoc-ux500-msp.h | 9 +-------- sound/soc/ux500/ux500_msp_i2s.h | 2 +- 3 files changed, 6 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 154e15f59702..43d6cb8c381d 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -31,7 +31,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = { }; struct msp_i2s_platform_data msp0_platform_data = { - .id = MSP_I2S_0, + .id = 0, .msp_i2s_dma_rx = &msp0_dma_rx, .msp_i2s_dma_tx = &msp0_dma_tx, }; @@ -49,7 +49,7 @@ static struct stedma40_chan_cfg msp1_dma_tx = { }; struct msp_i2s_platform_data msp1_platform_data = { - .id = MSP_I2S_1, + .id = 1, .msp_i2s_dma_rx = NULL, .msp_i2s_dma_tx = &msp1_dma_tx, }; @@ -69,13 +69,13 @@ static struct stedma40_chan_cfg msp2_dma_tx = { }; struct msp_i2s_platform_data msp2_platform_data = { - .id = MSP_I2S_2, + .id = 2, .msp_i2s_dma_rx = &msp2_dma_rx, .msp_i2s_dma_tx = &msp2_dma_tx, }; struct msp_i2s_platform_data msp3_platform_data = { - .id = MSP_I2S_3, + .id = 3, .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, }; diff --git a/include/linux/platform_data/asoc-ux500-msp.h b/include/linux/platform_data/asoc-ux500-msp.h index 9991aea3d577..2f34bb98fe2a 100644 --- a/include/linux/platform_data/asoc-ux500-msp.h +++ b/include/linux/platform_data/asoc-ux500-msp.h @@ -10,16 +10,9 @@ #include -enum msp_i2s_id { - MSP_I2S_0 = 0, - MSP_I2S_1, - MSP_I2S_2, - MSP_I2S_3, -}; - /* Platform data structure for a MSP I2S-device */ struct msp_i2s_platform_data { - enum msp_i2s_id id; + int id; struct stedma40_chan_cfg *msp_i2s_dma_rx; struct stedma40_chan_cfg *msp_i2s_dma_tx; }; diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h index 258d0bcee0bd..875de0f68b85 100644 --- a/sound/soc/ux500/ux500_msp_i2s.h +++ b/sound/soc/ux500/ux500_msp_i2s.h @@ -475,7 +475,7 @@ struct ux500_msp_dma_params { }; struct ux500_msp { - enum msp_i2s_id id; + int id; void __iomem *registers; struct device *dev; struct ux500_msp_dma_params playback_dma_data; -- cgit v1.2.3-58-ga151