From e73081d9afd4b5fe285d2a585a73d9c6f73ab0dd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 26 Mar 2013 10:26:15 +0000 Subject: ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT This fixes a regression introduced by commit: 05ec260 mfd:db8500-prcmu: update resource passing All DBx5x0 based SoCs have access to two Tightly Coupled Memory (TCM) locations based on the PRCMU itself. One area from program memory (TCPM) and one for data memory (TCDM). The PRCMU needs to know where these are in order to function correctly. However, these are currently passed though platform device resources, which can only be obtained if Device Tree booting isn't in use. Thus we must also support them in DT by supplying them through the PRCMU node. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/boot/dts/dbx5x0.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 9de93096601a..aaa63d0a8096 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -191,8 +191,8 @@ prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - reg-names = "prcmu"; + reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; + reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3-58-ga151 From 26135256d3e7d4d12c6268623edc1740888c041f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 10:47:38 +0000 Subject: ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back This fixes a regression introduced during the v3.9 merge window. Now MMCI on/off functionality is using the regulator framework from the MMCI driver, if we provide the ios_handler call-back we essentially duplicate functionality, which causes a large mess and lots of booting issues. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 051b62c27102..7f2cb6c5e2c1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { #endif struct mmci_platform_data mop500_sdi0_data = { - .ios_handler = mop500_sdi0_ios_handler, .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | -- cgit v1.2.3-58-ga151 From 265c3c0a64df50c0e8fe55cfe8af8851ed5feca5 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Mar 2013 14:13:53 +0000 Subject: ARM: ux500: Enable the clock controlling Ethernet on Snowball This fixes a regression introduced by common clk enablement. On some u8500 based boards, the FMSC clock which is usually used for flash, is wired up to the SMSC911x Ethernet driver. However, the SMSC911x doesn't have common clk support yet, rendering it unusable. Prior to the introduction of common clk the FMSC clock was default on; however, common clk disables all clocks by default and insists drivers take responsibility to enable theirs. This fix enables the FMSC clock on Snowball, subsequently turning on the SMSC911x Ethernet chip. It will be removed when the driver is compatible with common clk. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500.c | 12 ++++++++++++ arch/arm/mach-ux500/board-mop500.h | 1 + arch/arm/mach-ux500/cpu-db8500.c | 5 +++-- 3 files changed, 16 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index b03457881c4b..87d2d7b38ce9 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev) regulator_put(prox_regulator); } +void mop500_snowball_ethernet_clock_enable(void) +{ + struct clk *clk; + + clk = clk_get_sys("fsmc", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static struct cryp_platform_data u8500_cryp1_platform_data = { .mem_to_engine = { .dir = STEDMA40_MEM_TO_PERIPH, @@ -683,6 +693,8 @@ static void __init snowball_init_machine(void) mop500_audio_init(parent); mop500_uart_init(parent); + mop500_snowball_ethernet_clock_enable(); + /* This board has full regulator constraints */ regulator_has_full_constraints(); } diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eaa605f5d90d..d38951be70df 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); +void mop500_snowball_ethernet_clock_enable(void); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 19235cf7bbe3..f1a581844372 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -312,9 +312,10 @@ static void __init u8500_init_machine(void) /* Pinmaps must be in place before devices register */ if (of_machine_is_compatible("st-ericsson,mop500")) mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + mop500_snowball_ethernet_clock_enable(); + } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) hrefv60_pinmaps_init(); else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} /* TODO: Add pinmaps for ccu9540 board. */ -- cgit v1.2.3-58-ga151