From be5f7befbd75ec95f0d444813ae85e26851eff3b Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Feb 2017 22:41:45 +0100 Subject: ARM64: dts: meson-gxbb-wetek-hub: add the ethernet PHY's reset GPIO This resets the ethernet PHY during boot to get the PHY into a "clean" state. While here also specify the phy-handle of the ethmac node to make the PHY configuration similar to the one we have on GXL devices. This will allow us to specify OF-properties for the PHY itself. Signed-off-by: Martin Blumenstingl Reviewed-by: Jerome Brunet Signed-off-by: Kevin Hilman --- .../boot/dts/amlogic/meson-gxbb-wetek-hub.dts | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 56f855901262..50eb8f06d35b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -64,3 +64,27 @@ status = "disabled"; }; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; -- cgit v1.2.3-58-ga151