From 79c157a3fbaacd6b327f0433957767fe053d0d78 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Mon, 17 Feb 2014 22:46:54 -0800
Subject: microblaze: Rename global function heartbeat()

microblaze:allmodconfig complains for some configurations that 'heartbeat'
is redefined as different kind of symbol. This is seen in test compiles
of watchdog drivers, which often use 'heartbeat' as ststic variable.

Since 'heartbeat' is an unfortunate name for a global function,
rename it to microblaze_heartbeat. Also rename the setup function
to microblaze_setup_heartbeat.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/asm/setup.h | 4 ++--
 arch/microblaze/kernel/heartbeat.c  | 4 ++--
 arch/microblaze/kernel/timer.c      | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index f05df5630c84..0990b436be51 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -25,8 +25,8 @@ int setup_early_printk(char *opt);
 void remap_early_printk(void);
 void disable_early_printk(void);
 
-void heartbeat(void);
-void setup_heartbeat(void);
+void microblaze_heartbeat(void);
+void microblaze_setup_heartbeat(void);
 
 #   ifdef CONFIG_MMU
 extern void mmu_reset(void);
diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c
index 1879a0527776..4643e3ab9414 100644
--- a/arch/microblaze/kernel/heartbeat.c
+++ b/arch/microblaze/kernel/heartbeat.c
@@ -17,7 +17,7 @@
 
 static unsigned int base_addr;
 
-void heartbeat(void)
+void microblaze_heartbeat(void)
 {
 	static unsigned int cnt, period, dist;
 
@@ -42,7 +42,7 @@ void heartbeat(void)
 	}
 }
 
-void setup_heartbeat(void)
+void microblaze_setup_heartbeat(void)
 {
 	struct device_node *gpio = NULL;
 	int *prop;
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index fb0c61443f19..717a3d90e1b8 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -140,7 +140,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_xilinx_timer;
 #ifdef CONFIG_HEART_BEAT
-	heartbeat();
+	microblaze_heartbeat();
 #endif
 	timer_ack();
 	evt->event_handler(evt);
@@ -274,7 +274,7 @@ static void __init xilinx_timer_init(struct device_node *timer)
 
 	setup_irq(irq, &timer_irqaction);
 #ifdef CONFIG_HEART_BEAT
-	setup_heartbeat();
+	microblaze_setup_heartbeat();
 #endif
 	xilinx_clocksource_init();
 	xilinx_clockevent_init();
-- 
cgit v1.2.3-58-ga151


From 1b3fe856bd53bc1290ef77a0cce75424b81bdc19 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <linux@roeck-us.net>
Date: Mon, 17 Feb 2014 09:44:19 -0800
Subject: microblaze: Drop architecture-specific declaration of early_printk

miceroblaze:allmodconfig fails to build, complaining that
early_printk is redeclared.

include/linux/printk.h:114:6: error: static declaration of 'early_printk'
		follows non-static declaration
 void early_printk(const char *s, ...) { }
      ^
In file included from arch/microblaze/include/asm/page.h:19:0,
                 from arch/microblaze/include/asm/io.h:15,
                 from include/linux/io.h:22,
                 from kernel/irq/generic-chip.c:6:
arch/microblaze/include/asm/setup.h:22:6:
		note: previous declaration of 'early_printk' was here
 void early_printk(const char *fmt, ...);

This happens because CONFIG_EARLY_PRINTK is not enabled in this
configuration.

The architecture-specific declaration is not needed; drop it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/asm/setup.h | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index 0990b436be51..be84a4d3917f 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -19,8 +19,6 @@ extern char cmd_line[COMMAND_LINE_SIZE];
 
 extern char *klimit;
 
-void early_printk(const char *fmt, ...);
-
 int setup_early_printk(char *opt);
 void remap_early_printk(void);
 void disable_early_printk(void);
-- 
cgit v1.2.3-58-ga151


From 052920a656adc94ab27ada8551a8798ca42cad5e Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 28 Feb 2014 13:25:12 +0100
Subject: microblaze: Enable pselect6 syscall

Enable this syscall and cleanup comments.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/uapi/asm/unistd.h | 4 ++--
 arch/microblaze/kernel/syscall_table.S    | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h
index 20043b67d158..06d82d6ae134 100644
--- a/arch/microblaze/include/uapi/asm/unistd.h
+++ b/arch/microblaze/include/uapi/asm/unistd.h
@@ -93,7 +93,7 @@
 #define __NR_settimeofday	79 /* ok */
 #define __NR_getgroups		80 /* ok */
 #define __NR_setgroups		81 /* ok */
-#define __NR_select		82 /* obsolete -> sys_pselect7 */
+#define __NR_select		82 /* obsolete -> sys_pselect6 */
 #define __NR_symlink		83 /* symlinkat */
 #define __NR_oldlstat		84 /* remove */
 #define __NR_readlink		85 /* obsolete -> sys_readlinkat */
@@ -320,7 +320,7 @@
 #define __NR_readlinkat		305 /* ok */
 #define __NR_fchmodat		306 /* ok */
 #define __NR_faccessat		307 /* ok */
-#define __NR_pselect6		308 /* obsolete -> sys_pselect7 */
+#define __NR_pselect6		308 /* ok */
 #define __NR_ppoll		309 /* ok */
 #define __NR_unshare		310 /* ok */
 #define __NR_set_robust_list	311 /* ok */
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index b882ad50535b..38fc472d4657 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -308,7 +308,7 @@ ENTRY(sys_call_table)
 	.long sys_readlinkat		/* 305 */
 	.long sys_fchmodat
 	.long sys_faccessat
-	.long sys_ni_syscall /* pselect6 */
+	.long sys_pselect6
 	.long sys_ppoll
 	.long sys_unshare		/* 310 */
 	.long sys_set_robust_list
-- 
cgit v1.2.3-58-ga151


From f1b6f8712aa27f1f6f8a1df1321c103b7d399e92 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 12 Mar 2014 10:13:38 +0100
Subject: microblaze: Wire-up preadv/pwritev in syscall table

Enable these two syscalls.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/syscall_table.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 38fc472d4657..c09d741f869f 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -363,8 +363,8 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 360 */
 	.long sys_recvmsg
 	.long sys_accept4
-	.long sys_ni_syscall
-	.long sys_ni_syscall
+	.long sys_preadv
+	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
 	.long sys_recvmmsg
-- 
cgit v1.2.3-58-ga151


From cff2ee046e063d887a3af432c23e7ec214b6d09d Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 12 Mar 2014 10:18:30 +0100
Subject: microblaze: Wire-up new system calls sched_setattr/getattr

Wire-up sched_setattr/getattr syscalls.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/uapi/asm/unistd.h | 2 ++
 arch/microblaze/kernel/syscall_table.S    | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/microblaze/include/uapi/asm/unistd.h b/arch/microblaze/include/uapi/asm/unistd.h
index 06d82d6ae134..8d0791b49b31 100644
--- a/arch/microblaze/include/uapi/asm/unistd.h
+++ b/arch/microblaze/include/uapi/asm/unistd.h
@@ -396,5 +396,7 @@
 #define __NR_process_vm_writev	378
 #define __NR_kcmp		379
 #define __NR_finit_module	380
+#define __NR_sched_setattr	381
+#define __NR_sched_getattr	382
 
 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index c09d741f869f..329dfbad810b 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -381,3 +381,5 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_writev
 	.long sys_kcmp
 	.long sys_finit_module
+	.long sys_sched_setattr
+	.long sys_sched_getattr
-- 
cgit v1.2.3-58-ga151


From 1aa1243c339d4c902c0f9c1ced45742729a86e6a Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 24 Feb 2014 14:56:32 +0100
Subject: microblaze: Make intc driver endian aware

Detect endianess directly on the hardware and use
ioread/iowrite functions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/intc.c | 51 ++++++++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index 581451ad4687..15c7c12ea0e7 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -32,6 +32,29 @@ static void __iomem *intc_baseaddr;
 #define MER_ME (1<<0)
 #define MER_HIE (1<<1)
 
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void intc_write32(u32 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+}
+
+static unsigned int intc_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static void intc_write32_be(u32 val, void __iomem *addr)
+{
+	iowrite32be(val, addr);
+}
+
+static unsigned int intc_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
 static void intc_enable_or_unmask(struct irq_data *d)
 {
 	unsigned long mask = 1 << d->hwirq;
@@ -43,21 +66,21 @@ static void intc_enable_or_unmask(struct irq_data *d)
 	 * acks the irq before calling the interrupt handler
 	 */
 	if (irqd_is_level_type(d))
-		out_be32(intc_baseaddr + IAR, mask);
+		write_fn(mask, intc_baseaddr + IAR);
 
-	out_be32(intc_baseaddr + SIE, mask);
+	write_fn(mask, intc_baseaddr + SIE);
 }
 
 static void intc_disable_or_mask(struct irq_data *d)
 {
 	pr_debug("disable: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + CIE, 1 << d->hwirq);
+	write_fn(1 << d->hwirq, intc_baseaddr + CIE);
 }
 
 static void intc_ack(struct irq_data *d)
 {
 	pr_debug("ack: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + IAR, 1 << d->hwirq);
+	write_fn(1 << d->hwirq, intc_baseaddr + IAR);
 }
 
 static void intc_mask_ack(struct irq_data *d)
@@ -65,8 +88,8 @@ static void intc_mask_ack(struct irq_data *d)
 	unsigned long mask = 1 << d->hwirq;
 
 	pr_debug("disable_and_ack: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + CIE, mask);
-	out_be32(intc_baseaddr + IAR, mask);
+	write_fn(mask, intc_baseaddr + CIE);
+	write_fn(mask, intc_baseaddr + IAR);
 }
 
 static struct irq_chip intc_dev = {
@@ -83,7 +106,7 @@ unsigned int get_irq(void)
 {
 	unsigned int hwirq, irq = -1;
 
-	hwirq = in_be32(intc_baseaddr + IVR);
+	hwirq = read_fn(intc_baseaddr + IVR);
 	if (hwirq != -1U)
 		irq = irq_find_mapping(root_domain, hwirq);
 
@@ -140,17 +163,25 @@ static int __init xilinx_intc_of_init(struct device_node *intc,
 	pr_info("%s: num_irq=%d, edge=0x%x\n",
 		intc->full_name, nr_irq, intr_mask);
 
+	write_fn = intc_write32;
+	read_fn = intc_read32;
+
 	/*
 	 * Disable all external interrupts until they are
 	 * explicity requested.
 	 */
-	out_be32(intc_baseaddr + IER, 0);
+	write_fn(0, intc_baseaddr + IER);
 
 	/* Acknowledge any pending interrupts just in case. */
-	out_be32(intc_baseaddr + IAR, 0xffffffff);
+	write_fn(0xffffffff, intc_baseaddr + IAR);
 
 	/* Turn on the Master Enable. */
-	out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+	write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+	if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) {
+		write_fn = intc_write32_be;
+		read_fn = intc_read32_be;
+		write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+	}
 
 	/* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
 	 * lazy and Michal can clean it up to something nicer when he tests
-- 
cgit v1.2.3-58-ga151


From a1715bb7ff2e09f580a1f2f7f0c34e832f54a5fe Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 24 Feb 2014 15:04:03 +0100
Subject: microblaze: Make timer driver endian aware

Detect endianess directly on the hardware and use
ioread/iowrite functions.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/timer.c | 62 ++++++++++++++++++++++++++++++++----------
 1 file changed, 47 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index 717a3d90e1b8..dd96f0e4bfa2 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -43,10 +43,33 @@ static unsigned int timer_clock_freq;
 #define TCSR_PWMA	(1<<9)
 #define TCSR_ENALL	(1<<10)
 
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void timer_write32(u32 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+}
+
+static unsigned int timer_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static void timer_write32_be(u32 val, void __iomem *addr)
+{
+	iowrite32be(val, addr);
+}
+
+static unsigned int timer_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
 static inline void xilinx_timer0_stop(void)
 {
-	out_be32(timer_baseaddr + TCSR0,
-		 in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT);
+	write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT,
+		 timer_baseaddr + TCSR0);
 }
 
 static inline void xilinx_timer0_start_periodic(unsigned long load_val)
@@ -54,10 +77,10 @@ static inline void xilinx_timer0_start_periodic(unsigned long load_val)
 	if (!load_val)
 		load_val = 1;
 	/* loading value to timer reg */
-	out_be32(timer_baseaddr + TLR0, load_val);
+	write_fn(load_val, timer_baseaddr + TLR0);
 
 	/* load the initial value */
-	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+	write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
 
 	/* see timer data sheet for detail
 	 * !ENALL - don't enable 'em all
@@ -72,8 +95,8 @@ static inline void xilinx_timer0_start_periodic(unsigned long load_val)
 	 * UDT - set the timer as down counter
 	 * !MDT0 - generate mode
 	 */
-	out_be32(timer_baseaddr + TCSR0,
-			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+	write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+		 timer_baseaddr + TCSR0);
 }
 
 static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
@@ -81,13 +104,13 @@ static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
 	if (!load_val)
 		load_val = 1;
 	/* loading value to timer reg */
-	out_be32(timer_baseaddr + TLR0, load_val);
+	write_fn(load_val, timer_baseaddr + TLR0);
 
 	/* load the initial value */
-	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+	write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
 
-	out_be32(timer_baseaddr + TCSR0,
-			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+	write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+		 timer_baseaddr + TCSR0);
 }
 
 static int xilinx_timer_set_next_event(unsigned long delta,
@@ -133,7 +156,7 @@ static struct clock_event_device clockevent_xilinx_timer = {
 
 static inline void timer_ack(void)
 {
-	out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0));
+	write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0);
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -169,7 +192,7 @@ static __init void xilinx_clockevent_init(void)
 
 static u64 xilinx_clock_read(void)
 {
-	return in_be32(timer_baseaddr + TCR1);
+	return read_fn(timer_baseaddr + TCR1);
 }
 
 static cycle_t xilinx_read(struct clocksource *cs)
@@ -217,10 +240,10 @@ static int __init xilinx_clocksource_init(void)
 		panic("failed to register clocksource");
 
 	/* stop timer1 */
-	out_be32(timer_baseaddr + TCSR1,
-		 in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT);
+	write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
+		 timer_baseaddr + TCSR1);
 	/* start timer1 - up counting without interrupt */
-	out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+	write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
 
 	/* register timecounter - for ftrace support */
 	init_xilinx_timecounter();
@@ -245,6 +268,15 @@ static void __init xilinx_timer_init(struct device_node *timer)
 		BUG();
 	}
 
+	write_fn = timer_write32;
+	read_fn = timer_read32;
+
+	write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
+	if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
+		write_fn = timer_write32_be;
+		read_fn = timer_read32_be;
+	}
+
 	irq = irq_of_parse_and_map(timer, 0);
 
 	of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
-- 
cgit v1.2.3-58-ga151


From 579907e622067b13f8c6134c1b311664e77743b5 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 28 Feb 2014 13:07:28 +0100
Subject: microblaze: Fix sparse warning because of missing cpu.h header

Warning:
arch/microblaze/kernel/process.c:164:6: warning: symbol 'arch_cpu_idle'
was not declared. Should it be static?

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/kernel/process.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 7d1a9c8b1f3d..b2dd37196b3b 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -8,6 +8,7 @@
  * for more details.
  */
 
+#include <linux/cpu.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-- 
cgit v1.2.3-58-ga151


From ace526eb24848bb97292124a9aad39776ccb60f6 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 28 Feb 2014 14:00:11 +0100
Subject: microblaze: Fix compilation failure because of release_thread

Warning log:
In file included from arch/microblaze/include/asm/thread_info.h:21:0,
                 from include/linux/thread_info.h:54,
                 from include/asm-generic/preempt.h:4,
                 from arch/microblaze/include/generated/asm/preempt.h:1,
                 from include/linux/preempt.h:18,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/sysfs.h:20,
                 from include/linux/kobject.h:21,
                 from include/linux/device.h:17,
                 from include/linux/node.h:17,
                 from include/linux/cpu.h:16,
                 from arch/microblaze/kernel/process.c:11:
arch/microblaze/include/asm/processor.h:125:20: warning: no previous prototype
for 'release_thread' [-Wmissing-prototypes]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/asm/processor.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index d6e0ffea28b6..9d31b057c355 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -122,7 +122,7 @@ struct thread_struct {
 }
 
 /* Free all resources held by a thread. */
-extern inline void release_thread(struct task_struct *dead_task)
+static inline void release_thread(struct task_struct *dead_task)
 {
 }
 
-- 
cgit v1.2.3-58-ga151


From 845e5ef1a671b8cbf2b1a38d86392126620776f6 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 7 Apr 2014 12:48:35 +0200
Subject: microblaze: Move DTS file to common location at boot/dts folder

Preparation step for arch/microblaze/platform/ cleanup.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/boot/dts/system.dts         | 367 +++++++++++++++++++++++++++-
 arch/microblaze/platform/generic/system.dts | 366 ---------------------------
 2 files changed, 366 insertions(+), 367 deletions(-)
 mode change 120000 => 100644 arch/microblaze/boot/dts/system.dts
 delete mode 100644 arch/microblaze/platform/generic/system.dts

(limited to 'arch')

diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
deleted file mode 120000
index 7cb657892f21..000000000000
--- a/arch/microblaze/boot/dts/system.dts
+++ /dev/null
@@ -1 +0,0 @@
-../../platform/generic/system.dts
\ No newline at end of file
diff --git a/arch/microblaze/boot/dts/system.dts b/arch/microblaze/boot/dts/system.dts
new file mode 100644
index 000000000000..b620da23febb
--- /dev/null
+++ b/arch/microblaze/boot/dts/system.dts
@@ -0,0 +1,366 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		linux,stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts
deleted file mode 100644
index b620da23febb..000000000000
--- a/arch/microblaze/platform/generic/system.dts
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;
-- 
cgit v1.2.3-58-ga151


From 252133887984b758bb817e3931075293f695fb91 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 7 Apr 2014 12:51:44 +0200
Subject: microblaze: Sort Kconfig options

Kconfig options should be sorted.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/Kconfig | 52 ++++++++++++++++++++++++-------------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 79b9bcdfe498..dc51ec80cf1a 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -1,38 +1,38 @@
 config MICROBLAZE
 	def_bool y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select HAVE_MEMBLOCK
-	select HAVE_MEMBLOCK_NODE_MAP
-	select HAVE_FUNCTION_TRACER
-	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_DYNAMIC_FTRACE
-	select HAVE_FTRACE_MCOUNT_RECORD
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select HAVE_OPROFILE
-	select HAVE_ARCH_KGDB
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_API_DEBUG
-	select TRACING_SUPPORT
-	select OF
-	select OF_EARLY_FLATTREE
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select HAVE_DEBUG_KMEMLEAK
-	select IRQ_DOMAIN
-	select VIRT_TO_BUS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BUILDTIME_EXTABLE_SORT
+	select CLKSRC_OF
+	select CLONE_BACKWARDS3
+	select COMMON_CLK
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_CPU_DEVICES
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_CPU_DEVICES
-	select GENERIC_ATOMIC64
-	select GENERIC_CLOCKEVENTS
-	select COMMON_CLK
 	select GENERIC_SCHED_CLOCK
-	select GENERIC_IDLE_POLL_SETUP
+	select HAVE_ARCH_KGDB
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FUNCTION_TRACER
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select HAVE_OPROFILE
+	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
-	select CLONE_BACKWARDS3
-	select CLKSRC_OF
-	select BUILDTIME_EXTABLE_SORT
+	select OF
+	select OF_EARLY_FLATTREE
+	select TRACING_SUPPORT
+	select VIRT_TO_BUS
 
 config SWAP
 	def_bool n
-- 
cgit v1.2.3-58-ga151


From ed85ed697d8d66f4b3284d7a8a3dc7002c966178 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 7 Apr 2014 13:03:24 +0200
Subject: microblaze: Remove generic platform

All microblaze platforms are using the same configuration
that's why there is no reason to use generic platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/platform/Kconfig.platform     | 55 +++++++++++++++++-------
 arch/microblaze/platform/Makefile             |  1 -
 arch/microblaze/platform/generic/Kconfig.auto | 61 ---------------------------
 arch/microblaze/platform/generic/Makefile     |  3 --
 4 files changed, 40 insertions(+), 80 deletions(-)
 delete mode 100644 arch/microblaze/platform/generic/Kconfig.auto
 delete mode 100644 arch/microblaze/platform/generic/Makefile

(limited to 'arch')

diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
index db1aa5c22cea..1b3d8c849101 100644
--- a/arch/microblaze/platform/Kconfig.platform
+++ b/arch/microblaze/platform/Kconfig.platform
@@ -5,18 +5,6 @@
 #
 
 menu "Platform options"
-choice
-	prompt "Platform"
-	default PLATFORM_MICROBLAZE_AUTO
-	help
-	  Choose which hardware board/platform you are targeting.
-
-config PLATFORM_GENERIC
-	bool "Generic"
-	help
-	  Choose this option for the Generic platform.
-
-endchoice
 
 config OPT_LIB_FUNCTION
 	bool "Optimalized lib function"
@@ -37,8 +25,45 @@ config OPT_LIB_ASM
 	  Allows turn on optimalized library function (memcpy and memmove).
 	  Function are written in asm code.
 
-if PLATFORM_GENERIC=y
-	source "arch/microblaze/platform/generic/Kconfig.auto"
-endif
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+	hex "Physical address where Linux Kernel is"
+	default "0x90000000"
+	help
+	  BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+	string "Targeted FPGA family"
+	default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+	int "USE_MSR_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+	int "USE_PCMP_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+	int "USE_BARREL range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+	int "USE_DIV range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+	default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+	string "Core version number"
+	default 7.10.d
 
 endmenu
diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile
index ea1b75cc5775..5bcb631b80b6 100644
--- a/arch/microblaze/platform/Makefile
+++ b/arch/microblaze/platform/Makefile
@@ -1,6 +1,5 @@
 #
 # Makefile for arch/microblaze/platform directory
 #
-#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
 
 obj-y	+= platform.o
diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto
deleted file mode 100644
index 25a6f019e94d..000000000000
--- a/arch/microblaze/platform/generic/Kconfig.auto
+++ /dev/null
@@ -1,61 +0,0 @@
-#
-# (C) Copyright 2007 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Definitions for MICROBLAZE0
-comment "Definitions for MICROBLAZE0"
-
-config KERNEL_BASE_ADDR
-	hex "Physical address where Linux Kernel is"
-	default "0x90000000"
-	help
-	  BASE Address for kernel
-
-config XILINX_MICROBLAZE0_FAMILY
-	string "Targeted FPGA family"
-	default "virtex5"
-
-config XILINX_MICROBLAZE0_USE_MSR_INSTR
-	int "USE_MSR_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_PCMP_INSTR
-	int "USE_PCMP_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_BARREL
-	int "USE_BARREL range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_DIV
-	int "USE_DIV range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_HW_MUL
-	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_FPU
-	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
-	default 0
-
-config XILINX_MICROBLAZE0_HW_VER
-	string "Core version number"
-	default 7.10.d
diff --git a/arch/microblaze/platform/generic/Makefile b/arch/microblaze/platform/generic/Makefile
deleted file mode 100644
index 9a8b1bd3fa6d..000000000000
--- a/arch/microblaze/platform/generic/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-#
-# Empty Makefile to keep make clean happy
-#
-- 
cgit v1.2.3-58-ga151


From c24cf712ac53ae8a7bedceb1c967da1667431d8e Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Mon, 7 Apr 2014 13:05:00 +0200
Subject: microblaze: Remove platform folder

There is no reason to use platform folder structure now.
Everything is OF driven.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/Kconfig                   |  2 +-
 arch/microblaze/Kconfig.platform          | 69 +++++++++++++++++++++++++++++++
 arch/microblaze/Makefile                  |  1 -
 arch/microblaze/kernel/Makefile           |  2 +-
 arch/microblaze/kernel/platform.c         | 30 ++++++++++++++
 arch/microblaze/platform/Kconfig.platform | 69 -------------------------------
 arch/microblaze/platform/Makefile         |  5 ---
 arch/microblaze/platform/platform.c       | 30 --------------
 8 files changed, 101 insertions(+), 107 deletions(-)
 create mode 100644 arch/microblaze/Kconfig.platform
 create mode 100644 arch/microblaze/kernel/platform.c
 delete mode 100644 arch/microblaze/platform/Kconfig.platform
 delete mode 100644 arch/microblaze/platform/Makefile
 delete mode 100644 arch/microblaze/platform/platform.c

(limited to 'arch')

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index dc51ec80cf1a..9ae08541e30d 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -74,7 +74,7 @@ source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
 
-source "arch/microblaze/platform/Kconfig.platform"
+source "arch/microblaze/Kconfig.platform"
 
 menu "Processor type and features"
 
diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform
new file mode 100644
index 000000000000..1b3d8c849101
--- /dev/null
+++ b/arch/microblaze/Kconfig.platform
@@ -0,0 +1,69 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+
+config OPT_LIB_FUNCTION
+	bool "Optimalized lib function"
+	default y
+	help
+	  Allows turn on optimalized library function (memcpy and memmove).
+	  They are optimized by using word alignment. This will work
+	  fine if both source and destination are aligned on the same
+	  boundary. However, if they are aligned on different boundaries
+	  shifts will be necessary. This might result in bad performance
+	  on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+	bool "Optimalized lib function ASM"
+	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+	default n
+	help
+	  Allows turn on optimalized library function (memcpy and memmove).
+	  Function are written in asm code.
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+	hex "Physical address where Linux Kernel is"
+	default "0x90000000"
+	help
+	  BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+	string "Targeted FPGA family"
+	default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+	int "USE_MSR_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+	int "USE_PCMP_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+	int "USE_BARREL range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+	int "USE_DIV range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+	default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+	string "Core version number"
+	default 7.10.d
+
+endmenu
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index a69eaf2ab130..740f2b82a182 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -48,7 +48,6 @@ head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/
 core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
-core-y += arch/microblaze/platform/
 core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index 5b0e512c78e5..08d50cc55e7d 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -16,7 +16,7 @@ extra-y := head.o vmlinux.lds
 
 obj-y += dma.o exceptions.o \
 	hw_exception_handler.o intc.o irq.o \
-	process.o prom.o prom_parse.o ptrace.o \
+	platform.o process.o prom.o prom_parse.o ptrace.o \
 	reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
 
 obj-y += cpu/
diff --git a/arch/microblaze/kernel/platform.c b/arch/microblaze/kernel/platform.c
new file mode 100644
index 000000000000..b9529caa507a
--- /dev/null
+++ b/arch/microblaze/kernel/platform.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on virtex.c file
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+#include <asm/setup.h>
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "xlnx,compound", },
+	{}
+};
+
+static int __init microblaze_device_probe(void)
+{
+	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+	of_platform_reset_gpio_probe();
+	return 0;
+}
+device_initcall(microblaze_device_probe);
diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform
deleted file mode 100644
index 1b3d8c849101..000000000000
--- a/arch/microblaze/platform/Kconfig.platform
+++ /dev/null
@@ -1,69 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Platform selection Kconfig menu for MicroBlaze targets
-#
-
-menu "Platform options"
-
-config OPT_LIB_FUNCTION
-	bool "Optimalized lib function"
-	default y
-	help
-	  Allows turn on optimalized library function (memcpy and memmove).
-	  They are optimized by using word alignment. This will work
-	  fine if both source and destination are aligned on the same
-	  boundary. However, if they are aligned on different boundaries
-	  shifts will be necessary. This might result in bad performance
-	  on MicroBlaze systems without a barrel shifter.
-
-config OPT_LIB_ASM
-	bool "Optimalized lib function ASM"
-	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
-	default n
-	help
-	  Allows turn on optimalized library function (memcpy and memmove).
-	  Function are written in asm code.
-
-# Definitions for MICROBLAZE0
-comment "Definitions for MICROBLAZE0"
-
-config KERNEL_BASE_ADDR
-	hex "Physical address where Linux Kernel is"
-	default "0x90000000"
-	help
-	  BASE Address for kernel
-
-config XILINX_MICROBLAZE0_FAMILY
-	string "Targeted FPGA family"
-	default "virtex5"
-
-config XILINX_MICROBLAZE0_USE_MSR_INSTR
-	int "USE_MSR_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_PCMP_INSTR
-	int "USE_PCMP_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_BARREL
-	int "USE_BARREL range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_DIV
-	int "USE_DIV range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_HW_MUL
-	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_FPU
-	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
-	default 0
-
-config XILINX_MICROBLAZE0_HW_VER
-	string "Core version number"
-	default 7.10.d
-
-endmenu
diff --git a/arch/microblaze/platform/Makefile b/arch/microblaze/platform/Makefile
deleted file mode 100644
index 5bcb631b80b6..000000000000
--- a/arch/microblaze/platform/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for arch/microblaze/platform directory
-#
-
-obj-y	+= platform.o
diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c
deleted file mode 100644
index b9529caa507a..000000000000
--- a/arch/microblaze/platform/platform.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright 2008 Michal Simek <monstr@monstr.eu>
- *
- * based on virtex.c file
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <asm/prom.h>
-#include <asm/setup.h>
-
-static struct of_device_id xilinx_of_bus_ids[] __initdata = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "xlnx,compound", },
-	{}
-};
-
-static int __init microblaze_device_probe(void)
-{
-	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
-	of_platform_reset_gpio_probe();
-	return 0;
-}
-device_initcall(microblaze_device_probe);
-- 
cgit v1.2.3-58-ga151


From a66a626538af65cbfc611e2b2fce500ed3f24518 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 7 Feb 2013 15:12:24 +0100
Subject: microblaze: Use asm-generic/io.h

Using generic io.h will narrow down code duplication
in architecture io.h.

- define PCI_IOBASE
- remove non existing pci_io_base extern

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 arch/microblaze/include/asm/io.h | 302 ++-------------------------------------
 arch/microblaze/kernel/signal.c  |   2 +-
 arch/microblaze/mm/consistent.c  |   2 +-
 arch/microblaze/mm/init.c        |   2 +-
 arch/microblaze/mm/pgtable.c     |   5 +-
 5 files changed, 19 insertions(+), 294 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 3fbb7f1db3bc..1e4c3329f62e 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -15,7 +15,6 @@
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
-#include <asm-generic/iomap.h>
 
 #ifndef CONFIG_PCI
 #define _IO_BASE	0
@@ -25,211 +24,32 @@
 #define _IO_BASE	isa_io_base
 #define _ISA_MEM_BASE	isa_mem_base
 #define PCI_DRAM_OFFSET	pci_dram_offset
-#endif
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
 
 extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
 extern unsigned long pci_dram_offset;
-
 extern resource_size_t isa_mem_base;
+#endif
 
+#define PCI_IOBASE	((void __iomem *)_IO_BASE)
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
-/* the following is needed to support PCI with some drivers */
-
-#define mmiowb()
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *)addr;
-}
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *)addr;
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = v;
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *)addr = v;
-}
-
-/*
- * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus little endian.
- * Linux 2.4 for Microblaze had this wrong.
- */
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
-	return le16_to_cpu(*(volatile unsigned short __force *)addr);
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
-	return le32_to_cpu(*(volatile unsigned int __force *)addr);
-}
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
-	return le64_to_cpu(__raw_readq(addr));
-}
-static inline void writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = cpu_to_le16(v);
-}
-static inline void writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = cpu_to_le32(v);
-}
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
-
-/* ioread and iowrite variants. thease are for now same as __raw_
- * variants of accessors. we might check for endianess in the feature
- */
-#define ioread8(addr)		__raw_readb((u8 *)(addr))
-#define ioread16(addr)		__raw_readw((u16 *)(addr))
-#define ioread32(addr)		__raw_readl((u32 *)(addr))
-#define iowrite8(v, addr)	__raw_writeb((u8)(v), (u8 *)(addr))
-#define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-#define ioread16be(addr)	__raw_readw((u16 *)(addr))
-#define ioread32be(addr)	__raw_readl((u32 *)(addr))
-#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-/* These are the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl, the "string" versions
- * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
- * inb_p/inw_p/...
- * The macros don't do byte-swapping.
- */
-#define inb(port)		readb((u8 *)((unsigned long)(port)))
-#define outb(val, port)		writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port)		readw((u16 *)((unsigned long)(port)))
-#define outw(val, port)		writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port)		readl((u32 *)((unsigned long)(port)))
-#define outl(val, port)		writel((val), (u32 *)((unsigned long)(port)))
-
-#define inb_p(port)		inb((port))
-#define outb_p(val, port)	outb((val), (port))
-#define inw_p(port)		inw((port))
-#define outw_p(val, port)	outw((val), (port))
-#define inl_p(port)		inl((port))
-#define outl_p(val, port)	outl((val), (port))
-
-#define memset_io(a, b, c)	memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
-
 #ifdef CONFIG_MMU
-
-#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
-#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
-#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
-
 #define page_to_bus(page)	(page_to_phys(page))
-#define bus_to_virt(addr)	(phys_to_virt(addr))
 
 extern void iounmap(void __iomem *addr);
-/*extern void *__ioremap(phys_addr_t address, unsigned long size,
-		unsigned long flags);*/
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
-#define ioremap_nocache(addr, size)      ioremap((addr), (size))
-#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
-
-#else /* CONFIG_MMU */
-
-/**
- *	virt_to_phys - map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline unsigned long __iomem virt_to_phys(volatile void *address)
-{
-	return __pa((unsigned long)address);
-}
-
-#define virt_to_bus virt_to_phys
-
-/**
- *	phys_to_virt - map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline void *phys_to_virt(unsigned long address)
-{
-	return (void *)__va(address);
-}
 
-#define bus_to_virt(a) phys_to_virt(a)
-
-static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
-			unsigned long flags)
-{
-	return (void *)address;
-}
-
-#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr)		((void)0)
-#define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size)	ioremap((addr), (size))
+#define ioremap_nocache(addr, size)		ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)		ioremap((addr), (size))
+#define ioremap_wc(addr, size)			ioremap((addr), (size))
 
 #endif /* CONFIG_MMU */
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Big Endian
- */
+/* Big Endian */
 #define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
 #define out_be16(a, v) __raw_writew((v), (a))
 
@@ -239,10 +59,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define writel_be(v, a)	out_be32((__force unsigned *)a, v)
 #define readl_be(a)	in_be32((__force unsigned *)a)
 
-/*
- * Little endian
- */
-
+/* Little endian */
 #define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
@@ -253,100 +70,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-#define mmiowb()
-
-#define ioport_map(port, nr)	((void __iomem *)(port))
-#define ioport_unmap(addr)
-
-/* from asm-generic/io.h */
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u8 *buf = buffer;
-		do {
-			u8 x = inb(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u16 *buf = buffer;
-		do {
-			u16 x = inw(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u32 *buf = buffer;
-		do {
-			u32 x = inl(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u8 *buf = buffer;
-		do {
-			outb(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u16 *buf = buffer;
-		do {
-			outw(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u32 *buf = buffer;
-		do {
-			outl(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#define ioread8_rep(p, dst, count) \
-	insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
-	insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
-	insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
-	outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
-	outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
-	outsl((unsigned long) (p), (src), (count))
+#include <asm-generic/io.h>
 
 #define readb_relaxed	readb
 #define readw_relaxed	readw
diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c
index d26d7e7a6913..49a07a4d76d0 100644
--- a/arch/microblaze/kernel/signal.c
+++ b/arch/microblaze/kernel/signal.c
@@ -216,7 +216,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		/* MS: I need add offset in page */
 		address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
 		/* MS address is virtual */
-		address = virt_to_phys(address);
+		address = __virt_to_phys(address);
 		invalidate_icache_range(address, address + 8);
 		flush_dcache_range(address, address + 8);
 	}
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
index dbbf2246a260..e10ad930895e 100644
--- a/arch/microblaze/mm/consistent.c
+++ b/arch/microblaze/mm/consistent.c
@@ -117,7 +117,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
 	ret = (void *)va;
 
 	/* This gives us the real physical address of the first page. */
-	*dma_handle = pa = virt_to_bus((void *)vaddr);
+	*dma_handle = pa = __virt_to_phys(vaddr);
 #endif
 
 	/*
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 89077d346714..77bc7c7e6522 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -369,7 +369,7 @@ asmlinkage void __init mmu_init(void)
 	if (initrd_start) {
 		unsigned long size;
 		size = initrd_end - initrd_start;
-		memblock_reserve(virt_to_phys(initrd_start), size);
+		memblock_reserve(__virt_to_phys(initrd_start), size);
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 
diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c
index 10b3bd0a980d..4f4520e779a5 100644
--- a/arch/microblaze/mm/pgtable.c
+++ b/arch/microblaze/mm/pgtable.c
@@ -69,10 +69,11 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
 	 *
 	 * However, allow remap of rootfs: TBD
 	 */
+
 	if (mem_init_done &&
 		p >= memory_start && p < virt_to_phys(high_memory) &&
-		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
-		p < virt_to_phys((unsigned long)__bss_stop))) {
+		!(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
+		p < __virt_to_phys((phys_addr_t)__bss_stop))) {
 		pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
 			(unsigned long)p, __builtin_return_address(0));
 		return NULL;
-- 
cgit v1.2.3-58-ga151