From 575753e3bea3b67eef8e454fb87f719e3f7da599 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:04:53 +0200 Subject: OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +-- arch/arm/mach-omap2/board-omap4panda.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e1fe304ce361..7bbe23ee3e35 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -614,8 +614,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3e1c507fb01f..aeb9e88e0a2a 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -497,8 +497,7 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } static struct omap_dss_device omap4_panda_hdmi_device = { -- cgit v1.2.3-58-ga151 From 3932a32fcf5393f8be70ac99dc718ad7ad0a415b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:49:38 +0200 Subject: OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/board-omap4panda.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7bbe23ee3e35..02a4d5f3e8c8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,7 +52,7 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -596,7 +596,7 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index aeb9e88e0a2a..844e285b40a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,7 +51,7 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ @@ -479,7 +479,7 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; -- cgit v1.2.3-58-ga151 From 7bb122d155f742fe2d79849090c825be7b4a247e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:59:00 +0200 Subject: OMAPDSS: remove wrong HDMI HPD muxing "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/display.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index ffd9bd983023..d6e65e29d83d 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -102,12 +102,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", -- cgit v1.2.3-58-ga151 From 78a1ad8f12db70b8b0a4548b90704de08ee216ce Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:02:36 +0200 Subject: OMAP: 4430SDP/Panda: setup HDMI GPIO muxes The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 02a4d5f3e8c8..95766cdfc57f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 844e285b40a3..982397269360 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -538,6 +538,9 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } static void __init omap4_panda_init(void) -- cgit v1.2.3-58-ga151 From aa74274b464d4aa24703963ac89a0ee942d5d267 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:05:32 +0200 Subject: OMAP: 4430SDP/Panda: add HDMI HPD gpio Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 95766cdfc57f..cd6ec517a929 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -54,6 +54,7 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -598,6 +599,7 @@ static void __init omap_sfh7741prox_init(void) static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -824,6 +826,7 @@ static void omap_4430sdp_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982397269360..e1b196361f95 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -53,6 +53,7 @@ #define GPIO_WIFI_IRQ 53 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -481,6 +482,7 @@ int __init omap4_panda_dvi_init(void) static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -541,6 +543,7 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) -- cgit v1.2.3-58-ga151 From c49d005b6cc8491fad5b24f82805be2d6bcbd3dd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:09:57 +0200 Subject: OMAPDSS: HDMI: PHY burnout fix A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 5 +++ arch/arm/mach-omap2/board-omap4panda.c | 5 +++ drivers/video/omap2/dss/hdmi.c | 3 ++ drivers/video/omap2/dss/ti_hdmi.h | 4 ++ drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++++++++++-- include/video/omapdss.h | 5 +++ 6 files changed, 86 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index cd6ec517a929..0ce758edaad2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -732,6 +732,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -739,6 +743,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e1b196361f95..370c4b428888 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -502,6 +502,10 @@ static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -509,6 +513,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index c39f9c3a92cf..d7aa3b056529 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -497,6 +497,7 @@ bool omapdss_hdmi_detect(void) int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) { + struct omap_dss_hdmi_data *priv = dssdev->data; int r = 0; DSSDBG("ENTER hdmi_display_enable\n"); @@ -509,6 +510,8 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } + hdmi.ip_data.hpd_gpio = priv->hpd_gpio; + r = omap_dss_start_device(dssdev); if (r) { DSSERR("failed to start device\n"); diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index 7503f7f619a7..50dadba5070a 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -126,6 +126,10 @@ struct hdmi_ip_data { const struct ti_hdmi_ip_ops *ops; struct hdmi_config cfg; struct hdmi_pll_info pll_data; + + /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */ + int hpd_gpio; + bool phy_tx_enabled; }; int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data); void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data); diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f18f163..2d72334ca3da 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -223,6 +224,49 @@ void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data) hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF); } +static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data) +{ + unsigned long flags; + bool hpd; + int r; + /* this should be in ti_hdmi_4xxx_ip private data */ + static DEFINE_SPINLOCK(phy_tx_lock); + + spin_lock_irqsave(&phy_tx_lock, flags); + + hpd = gpio_get_value(ip_data->hpd_gpio); + + if (hpd == ip_data->phy_tx_enabled) { + spin_unlock_irqrestore(&phy_tx_lock, flags); + return 0; + } + + if (hpd) + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); + else + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON); + + if (r) { + DSSERR("Failed to %s PHY TX power\n", + hpd ? "enable" : "disable"); + goto err; + } + + ip_data->phy_tx_enabled = hpd; +err: + spin_unlock_irqrestore(&phy_tx_lock, flags); + return r; +} + +static irqreturn_t hpd_irq_handler(int irq, void *data) +{ + struct hdmi_ip_data *ip_data = data; + + hdmi_check_hpd_state(ip_data); + + return IRQ_HANDLED; +} + int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) { u16 r = 0; @@ -232,10 +276,6 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) if (r) return r; - r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); - if (r) - return r; - /* * Read address 0 in order to get the SCP reset done completed * Dummy access performed to make sure reset is done @@ -257,12 +297,32 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) /* Write to phy address 3 to change the polarity control */ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio), + NULL, hpd_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "hpd", ip_data); + if (r) { + DSSERR("HPD IRQ request failed\n"); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + + r = hdmi_check_hpd_state(ip_data); + if (r) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + return 0; } void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + ip_data->phy_tx_enabled = false; } static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data) diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 062b3b24ff10..483f67caa7ad 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -590,6 +590,11 @@ struct omap_dss_device { int (*get_backlight)(struct omap_dss_device *dssdev); }; +struct omap_dss_hdmi_data +{ + int hpd_gpio; +}; + struct omap_dss_driver { struct device_driver driver; -- cgit v1.2.3-58-ga151