From 3d76be5b933e2a66d85a2f7444e68e99e8a48ad4 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Wed, 20 May 2015 10:00:10 -0700 Subject: ARM: dts: am335x-boneblack: disable RTC-only sleep Fixes: http://bugs.elinux.org/issues/143 Entering RTC-only sleep is only properly supported on early prototypes series (pre-A6) of the BeagleBone Black. Since rev (A6A), which include all production versions, it is not support at due to. (rev A6) enable of the 3v3b regulator moved from LDO2 to LDO4 (3v3a) side-effect: 3v3b rail remains on in sleep-mode (also in off-mode when battery-powered) (rev A6A) am335x vdds supply moved from LDO3 to LDO1 side-effect: vdds remains supplied in sleep-mode Reported-by: Matthijs van Duin Tested-by: Matthijs van Duin Signed-off-by: Robert Nelson Cc: Tony Lindgren Cc: Felipe Balbi Cc: Johan Hovold Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-boneblack.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d259fa68..901739fcb85a 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -80,7 +80,3 @@ status = "okay"; }; }; - -&rtc { - system-power-controller; -}; -- cgit v1.2.3-58-ga151 From ed38c6573b2ef34b3629989f7b6ac5894a010403 Mon Sep 17 00:00:00 2001 From: Anthoine Bourgeois Date: Wed, 20 May 2015 10:00:10 -0700 Subject: ARM: dts: omap3-devkit8000: Fix NAND DT node Add nand-ecc-opt and device-width properties to enable nand support on Devkit8000. Signed-off-by: Anthoine Bourgeois Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-devkit8000.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 134d3f27a8ec..921de6605f07 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -110,6 +110,8 @@ nand@0,0 { reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "sw"; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; -- cgit v1.2.3-58-ga151 From f25bf74c8862efdc30453d16d60cf22958a4873e Mon Sep 17 00:00:00 2001 From: Romain Izard Date: Wed, 20 May 2015 10:00:10 -0700 Subject: ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK While Sitara AM335x SoCs are very close to OMAP SoCs, the 32-line GPIO controllers are numbered from 0 on AM335x and from 1 on OMAP. But when the configuration for the TI WLAN controllers was converted from platform data to device tree, this detail was overlooked, as 10 boards were using OMAP with the WL12xx and WL18xx controllers, and only one was based on AM335x. This invalid configuration prevents the WL1271 module on the AM335x EVM-SK from notifying interrupts to the SoC, and breaks the wlan driver. The DTS must be corrected to use the correct GPIO controller. Signed-off-by: Romain Izard Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 87fc7a35e802..156d05efcb70 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -654,7 +654,7 @@ wlcore: wlcore@2 { compatible = "ti,wl1271"; reg = <2>; - interrupt-parent = <&gpio1>; + interrupt-parent = <&gpio0>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */ ref-clock-frequency = <38400000>; }; -- cgit v1.2.3-58-ga151