From 5e3644a95db11e2e582ae3765ffad6e0cce5376e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 23 Mar 2010 10:30:08 +0100 Subject: MIPS: BCM63xx: Fix build failure in board_bcm963xx.c Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered in the board_prom_init callback, but it references variables and functions which are declared below. Move the variables and functions above board_prom_init. Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1077/ Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 140 +++++++++++++++--------------- 1 file changed, 70 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 5addb9c6fb0b..8dba8cfb752f 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -618,6 +618,76 @@ static const struct board_info __initdata *bcm963xx_boards[] = { #endif }; +/* + * Register a sane SPROMv2 to make the on-board + * bcm4318 WLAN work + */ +#ifdef CONFIG_SSB_PCIHOST +static struct ssb_sprom bcm63xx_sprom = { + .revision = 0x02, + .board_rev = 0x17, + .country_code = 0x0, + .ant_available_bg = 0x3, + .pa0b0 = 0x15ae, + .pa0b1 = 0xfa85, + .pa0b2 = 0xfe8d, + .pa1b0 = 0xffff, + .pa1b1 = 0xffff, + .pa1b2 = 0xffff, + .gpio0 = 0xff, + .gpio1 = 0xff, + .gpio2 = 0xff, + .gpio3 = 0xff, + .maxpwr_bg = 0x004c, + .itssi_bg = 0x00, + .boardflags_lo = 0x2848, + .boardflags_hi = 0x0000, +}; +#endif + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + u8 *p; + int count; + + if (mac_addr_used >= nvram.mac_addr_count) { + printk(KERN_ERR PFX "not enough mac address\n"); + return -ENODEV; + } + + memcpy(mac, nvram.mac_addr_base, ETH_ALEN); + p = mac + ETH_ALEN - 1; + count = mac_addr_used; + + while (count--) { + do { + (*p)++; + if (*p != 0) + break; + p--; + } while (p != mac); + } + + if (p == mac) { + printk(KERN_ERR PFX "unable to fetch mac address\n"); + return -ENODEV; + } + + mac_addr_used++; + return 0; +} + /* * early init callback, read nvram data from flash and checksum it */ @@ -744,49 +814,6 @@ void __init board_setup(void) panic("unexpected CPU for bcm963xx board"); } -/* - * return board name for /proc/cpuinfo - */ -const char *board_get_name(void) -{ - return board.name; -} - -/* - * register & return a new board mac address - */ -static int board_get_mac_address(u8 *mac) -{ - u8 *p; - int count; - - if (mac_addr_used >= nvram.mac_addr_count) { - printk(KERN_ERR PFX "not enough mac address\n"); - return -ENODEV; - } - - memcpy(mac, nvram.mac_addr_base, ETH_ALEN); - p = mac + ETH_ALEN - 1; - count = mac_addr_used; - - while (count--) { - do { - (*p)++; - if (*p != 0) - break; - p--; - } while (p != mac); - } - - if (p == mac) { - printk(KERN_ERR PFX "unable to fetch mac address\n"); - return -ENODEV; - } - - mac_addr_used++; - return 0; -} - static struct mtd_partition mtd_partitions[] = { { .name = "cfe", @@ -818,33 +845,6 @@ static struct platform_device mtd_dev = { }, }; -/* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work - */ -#ifdef CONFIG_SSB_PCIHOST -static struct ssb_sprom bcm63xx_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, - .ant_available_bg = 0x3, - .pa0b0 = 0x15ae, - .pa0b1 = 0xfa85, - .pa0b2 = 0xfe8d, - .pa1b0 = 0xffff, - .pa1b1 = 0xffff, - .pa1b2 = 0xffff, - .gpio0 = 0xff, - .gpio1 = 0xff, - .gpio2 = 0xff, - .gpio3 = 0xff, - .maxpwr_bg = 0x004c, - .itssi_bg = 0x00, - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, -}; -#endif - static struct gpio_led_platform_data bcm63xx_led_data; static struct platform_device bcm63xx_gpio_leds = { -- cgit v1.2.3-58-ga151