From 6b617e224dfac0b64ed70dacdac50be6eb78a6a1 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 15 Feb 2011 00:13:31 +0800 Subject: x86/platform: Add a wallclock_init func to x86_init.timers ops Some wall clock devices use MMIO based HW register, this new function will give them a chance to do some initialization work before their get/set_time service get called, which is usually in early kernel boot phase. Signed-off-by: Feng Tang Signed-off-by: Jacob Pan Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/x86_init.h | 2 ++ arch/x86/kernel/setup.c | 2 ++ arch/x86/kernel/x86_init.c | 1 + 3 files changed, 5 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 64642ad019fb..643ebf2e2ad8 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -83,11 +83,13 @@ struct x86_init_paging { * boot cpu * @tsc_pre_init: platform function called before TSC init * @timer_init: initialize the platform timer (default PIT/HPET) + * @wallclock_init: init the wallclock device */ struct x86_init_timers { void (*setup_percpu_clockev)(void); void (*tsc_pre_init)(void); void (*timer_init)(void); + void (*wallclock_init)(void); }; /** diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 21c6746338af..68d535a77df0 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1059,6 +1059,8 @@ void __init setup_arch(char **cmdline_p) #endif x86_init.oem.banner(); + x86_init.timers.wallclock_init(); + mcheck_init(); local_irq_save(flags); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ceb2911aa439..c11514e9128b 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -70,6 +70,7 @@ struct x86_init_ops x86_init __initdata = { .setup_percpu_clockev = setup_boot_APIC_clock, .tsc_pre_init = x86_init_noop, .timer_init = hpet_time_init, + .wallclock_init = x86_init_noop, }, .iommu = { -- cgit v1.2.3-58-ga151 From 168202c7bf89d7a2abaf8deaf4bbed18a1f7b3a3 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 15 Feb 2011 00:13:32 +0800 Subject: mrst/vrtc: Avoid using cmos rtc ops If we don't assign Moorestown specific wallclock init and ops function the rtc/persisent clock code will use cmos rtc for access, this will crash Moorestown in that the ioports are not present. Also in vrtc driver, should avoid using cmos access to check UIP status. [feng.tang@intel.com: use set_fixmap_offset_nocache() to simplify code] Signed-off-by: Jacob Pan Signed-off-by: Feng Tang Signed-off-by: Alan Cox Signed-off-by: Thomas Gleixner --- arch/x86/platform/mrst/mrst.c | 2 ++ arch/x86/platform/mrst/vrtc.c | 16 ++++------------ drivers/rtc/rtc-mrst.c | 13 ++++++++++++- 3 files changed, 18 insertions(+), 13 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index fee0b4914e07..4c542c757cb4 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -294,6 +295,7 @@ void __init x86_mrst_early_setup(void) x86_platform.calibrate_tsc = mrst_calibrate_tsc; x86_platform.i8042_detect = mrst_i8042_detect; + x86_init.timers.wallclock_init = mrst_rtc_init; x86_init.pci.init = pci_mrst_init; x86_init.pci.fixup_irqs = x86_init_noop; diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 32cd7edd71a0..04cf645feb92 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -100,22 +100,14 @@ int vrtc_set_mmss(unsigned long nowtime) void __init mrst_rtc_init(void) { - unsigned long rtc_paddr; - void __iomem *virt_base; + unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr; sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); - if (!sfi_mrtc_num) + if (!sfi_mrtc_num || !vrtc_paddr) return; - rtc_paddr = sfi_mrtc_array[0].phys_addr; - - /* vRTC's register address may not be page aligned */ - set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); - - virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); - virt_base += rtc_paddr & ~PAGE_MASK; - vrtc_virt_base = virt_base; - + vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC, + vrtc_paddr); x86_platform.get_wallclock = vrtc_get_time; x86_platform.set_wallclock = vrtc_set_mmss; } diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index bcd0cf63eb16..28e02e7580f4 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -62,6 +62,17 @@ static inline int is_intr(u8 rtc_intr) return rtc_intr & RTC_IRQMASK; } +static inline unsigned char vrtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + /* * rtc_time's year contains the increment over 1900, but vRTC's YEAR * register can't be programmed to value larger than 0x64, so vRTC @@ -76,7 +87,7 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time) { unsigned long flags; - if (rtc_is_updating()) + if (vrtc_is_updating()) mdelay(20); spin_lock_irqsave(&rtc_lock, flags); -- cgit v1.2.3-58-ga151 From 13884c6680973f0ce3483dc59b636b4962d6dafe Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 17 Dec 2010 16:33:53 +0100 Subject: x86/pci: Remove unused variable |arch/x86/pci/ce4100.c: In function `ce4100_conf_read': |arch/x86/pci/ce4100.c:257:9: warning: unused variable `retval' Signed-off-by: Sebastian Andrzej Siewior Cc: dirk.brandewie@gmail.com LKML-Reference: <1292600033-12271-16-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/pci/ce4100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c index 85b68ef5e809..c63c6d3dd8e8 100644 --- a/arch/x86/pci/ce4100.c +++ b/arch/x86/pci/ce4100.c @@ -254,7 +254,7 @@ int bridge_read(unsigned int devfn, int reg, int len, u32 *value) static int ce4100_conf_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { - int i, retval = 1; + int i; if (bus == 1) { for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { -- cgit v1.2.3-58-ga151 From 5df91509d324d44cfb11e55d9cb02fe18b53b045 Mon Sep 17 00:00:00 2001 From: "jacob.jun.pan@linux.intel.com" Date: Fri, 18 Feb 2011 13:42:54 -0800 Subject: x86: mrst: Remove apb timer read workaround APB timer current count was unreliable in the earlier silicon, which could result in time going backwards. This problem has been fixed in the current silicon stepping. This patch removes the workaround which was used to check and prevent timer rolling back when APB timer is used as clocksource device. The workaround code was also flawed by potential race condition around the cached read value last_read. Though a fix can be done by assigning last_read to a local variable at the beginning of apbt_read_clocksource(), but this is not necessary anymore. [ tglx: A sane timer on an Intel chip - I can't believe it ] Signed-off-by: Jacob Pan Cc: Arjan van de Ven Cc: Alan Cox LKML-Reference: <1298065374-25532-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apb_timer.c | 60 +++------------------------------------------ 1 file changed, 4 insertions(+), 56 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 7c9ab59653e8..afc406498c9d 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -506,64 +506,12 @@ static int apbt_next_event(unsigned long delta, return 0; } -/* - * APB timer clock is not in sync with pclk on Langwell, which translates to - * unreliable read value caused by sampling error. the error does not add up - * overtime and only happens when sampling a 0 as a 1 by mistake. so the time - * would go backwards. the following code is trying to prevent time traveling - * backwards. little bit paranoid. - */ static cycle_t apbt_read_clocksource(struct clocksource *cs) { - unsigned long t0, t1, t2; - static unsigned long last_read; - -bad_count: - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if (unlikely(t1 < t2)) { - pr_debug("APBT: read current count error %lx:%lx:%lx\n", - t1, t2, t2 - t1); - goto bad_count; - } - /* - * check against cached last read, makes sure time does not go back. - * it could be a normal rollover but we will do tripple check anyway - */ - if (unlikely(t2 > last_read)) { - /* check if we have a normal rollover */ - unsigned long raw_intr_status = - apbt_readl_reg(APBTMRS_RAW_INT_STATUS); - /* - * cs timer interrupt is masked but raw intr bit is set if - * rollover occurs. then we read EOI reg to clear it. - */ - if (raw_intr_status & (1 << phy_cs_timer_id)) { - apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); - goto out; - } - pr_debug("APB CS going back %lx:%lx:%lx ", - t2, last_read, t2 - last_read); -bad_count_x3: - pr_debug("triple check enforced\n"); - t0 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if ((t2 > t1) || (t1 > t0)) { - printk(KERN_ERR "Error: APB CS tripple check failed\n"); - goto bad_count_x3; - } - } -out: - last_read = t2; - return (cycle_t)~t2; + unsigned long current_count; + + current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE); + return (cycle_t)~current_count; } static int apbt_clocksource_register(void) -- cgit v1.2.3-58-ga151 From 540089798d2ae115fc9bff7ed3823c8c32249607 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 09:50:15 +0100 Subject: x86: OLPC: Remove redundant !X64_64 config dependency OLPC is under if X86_32 already. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d30aad..e327f96b8805 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2068,7 +2068,7 @@ config OLPC bool "One Laptop Per Child support" select GPIOLIB select OLPC_OPENFIRMWARE - depends on !X86_64 && !X86_PAE + depends on !X86_PAE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2081,7 +2081,7 @@ config OLPC_XO1 config OLPC_OPENFIRMWARE bool "Support for OLPC's Open Firmware" - depends on !X86_64 && !X86_PAE + depends on !X86_PAE default n select OF help -- cgit v1.2.3-58-ga151 From fe239545a1eed57a60c5d4063f0b56f6cd1811ff Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:05:53 +0100 Subject: x86: OLPC: Hide OLPC_OPENFIRMWARE config switch OLPC selects OLPC_OPENFIRMWARE unconditionally. If OLPC=n then the OLPC_OPENFIRMWARE functionality is pointless. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e327f96b8805..dbc10fce6665 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2080,18 +2080,12 @@ config OLPC_XO1 Add support for non-essential features of the OLPC XO-1 laptop. config OLPC_OPENFIRMWARE - bool "Support for OLPC's Open Firmware" - depends on !X86_PAE - default n + bool select OF - help - This option adds support for the implementation of Open Firmware - that is used on the OLPC XO-1 Children's Machine. - If unsure, say N here. + select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE config OLPC_OPENFIRMWARE_DT bool - default y if OLPC_OPENFIRMWARE && PROC_DEVICETREE select OF_PROMTREE endif # X86_32 -- cgit v1.2.3-58-ga151 From dc3119e700216a70e82fe07a79f1618852058354 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:08:31 +0100 Subject: x86: OLPC: Cleanup config maze completely Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are really necessary. OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select OF" part under OLPC config option and fixup the dependencies in Makefiles and code. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 10 +++------- arch/x86/include/asm/olpc_ofw.h | 11 ----------- arch/x86/kernel/head_32.S | 2 +- arch/x86/platform/olpc/Makefile | 2 +- 4 files changed, 5 insertions(+), 20 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dbc10fce6665..677501d061a3 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2066,9 +2066,10 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" - select GPIOLIB - select OLPC_OPENFIRMWARE depends on !X86_PAE + select GPIOLIB + select OF + select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2079,11 +2080,6 @@ config OLPC_XO1 ---help--- Add support for non-essential features of the OLPC XO-1 laptop. -config OLPC_OPENFIRMWARE - bool - select OF - select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE - config OLPC_OPENFIRMWARE_DT bool select OF_PROMTREE diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 641988efe063..1fff2de124e5 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -6,8 +6,6 @@ #define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ -#ifdef CONFIG_OLPC_OPENFIRMWARE - extern bool olpc_ofw_is_installed(void); /* run an OFW command by calling into the firmware */ @@ -26,15 +24,6 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); -#else /* !CONFIG_OLPC_OPENFIRMWARE */ - -static inline bool olpc_ofw_is_installed(void) { return false; } -static inline void olpc_ofw_detect(void) { } -static inline void setup_olpc_ofw_pgd(void) { } -static inline bool olpc_ofw_present(void) { return false; } - -#endif /* !CONFIG_OLPC_OPENFIRMWARE */ - #ifdef CONFIG_OLPC_OPENFIRMWARE_DT extern void olpc_dt_build_devicetree(void); #else diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 767d6c43de37..d8cc18a83260 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -137,7 +137,7 @@ ENTRY(startup_32) movsl 1: -#ifdef CONFIG_OLPC_OPENFIRMWARE +#ifdef CONFIG_OLPC /* save OFW's pgdir table for later use when calling into OFW */ movl %cr3, %eax movl %eax, pa(olpc_ofw_pgd) diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index e797428b163b..e18e641ae7bd 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o -obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o +obj-$(CONFIG_OLPC) += olpc_ofw.o obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o -- cgit v1.2.3-58-ga151 From c2a941fadb57d157d59eec424674bd0c3a28788c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 10:32:42 +0100 Subject: x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE instead. Signed-off-by: Thomas Gleixner Cc: Andres Salomon --- arch/x86/Kconfig | 6 +----- arch/x86/include/asm/olpc_ofw.h | 4 ++-- arch/x86/platform/olpc/Makefile | 2 +- 3 files changed, 4 insertions(+), 8 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 677501d061a3..4f3d3d432bad 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2069,7 +2069,7 @@ config OLPC depends on !X86_PAE select GPIOLIB select OF - select OLPC_OPENFIRMWARE_DT if PROC_DEVICETREE + select OF_PROMTREE if PROC_DEVICETREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2080,10 +2080,6 @@ config OLPC_XO1 ---help--- Add support for non-essential features of the OLPC XO-1 laptop. -config OLPC_OPENFIRMWARE_DT - bool - select OF_PROMTREE - endif # X86_32 config AMD_NB diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 1fff2de124e5..28a7fec01100 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -24,10 +24,10 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); -#ifdef CONFIG_OLPC_OPENFIRMWARE_DT +#ifdef CONFIG_OF_PROMTREE extern void olpc_dt_build_devicetree(void); #else static inline void olpc_dt_build_devicetree(void) { } -#endif /* CONFIG_OLPC_OPENFIRMWARE_DT */ +#endif #endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index e18e641ae7bd..c2a8cab65e5d 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o obj-$(CONFIG_OLPC) += olpc_ofw.o -obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o +obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o -- cgit v1.2.3-58-ga151 From 939d578ecc62b07efeb186576ab190fe0b766501 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 23 Feb 2011 11:46:01 +0100 Subject: x86: OLPC: Make OLPC=n build again Stupid me missed the functions called from setup.c. Add the stubs back for OLPC=n Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/olpc_ofw.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 28a7fec01100..c5d3a5abbb9f 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -6,6 +6,8 @@ #define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ +#ifdef CONFIG_OLPC + extern bool olpc_ofw_is_installed(void); /* run an OFW command by calling into the firmware */ @@ -24,6 +26,11 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); +#else /* !CONFIG_OLPC */ +static inline void olpc_ofw_detect(void) { } +static inline void setup_olpc_ofw_pgd(void) { } +#endif /* !CONFIG_OLPC */ + #ifdef CONFIG_OF_PROMTREE extern void olpc_dt_build_devicetree(void); #else -- cgit v1.2.3-58-ga151 From f1c2b357148ec27fcc6ce0992211209a0ea20d8f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:36 +0100 Subject: x86: e820: Remove conditional early mapping in parse_e820_ext This patch ensures that the memory passed from parse_setup_data() is large enough to cover the complete data structure. That means that the conditional mapping in parse_e820_ext() can go. While here, I also attempt not to map two pages if the address is not aligned to a page boundary. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-2-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/e820.h | 2 +- arch/x86/kernel/e820.c | 8 +------- arch/x86/kernel/setup.c | 17 ++++++++++++++--- 3 files changed, 16 insertions(+), 11 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index e99d55d74df5..908b96957d88 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -96,7 +96,7 @@ extern void e820_setup_gap(void); extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize, unsigned long start_addr, unsigned long long end_addr); struct setup_data; -extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data); +extern void parse_e820_ext(struct setup_data *data); #if defined(CONFIG_X86_64) || \ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 294f26da0c0c..5fad62684651 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -667,21 +667,15 @@ __init void e820_setup_gap(void) * boot_params.e820_map, others are passed via SETUP_E820_EXT node of * linked list of struct setup_data, which is parsed here. */ -void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data) +void __init parse_e820_ext(struct setup_data *sdata) { - u32 map_len; int entries; struct e820entry *extmap; entries = sdata->len / sizeof(struct e820entry); - map_len = sdata->len + sizeof(struct setup_data); - if (map_len > PAGE_SIZE) - sdata = early_ioremap(pa_data, map_len); extmap = (struct e820entry *)(sdata->data); __append_e820_map(extmap, entries); sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - if (map_len > PAGE_SIZE) - early_iounmap(sdata, map_len); printk(KERN_INFO "extended physical RAM map:\n"); e820_print_map("extended"); } diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index ca2f10622a79..9521483ce58c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -429,16 +429,27 @@ static void __init parse_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_memremap(pa_data, PAGE_SIZE); + u32 data_len, map_len; + + map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK), + (u64)sizeof(struct setup_data)); + data = early_memremap(pa_data, map_len); + data_len = data->len + sizeof(struct setup_data); + if (data_len > map_len) { + early_iounmap(data, map_len); + data = early_memremap(pa_data, data_len); + map_len = data_len; + } + switch (data->type) { case SETUP_E820_EXT: - parse_e820_ext(data, pa_data); + parse_e820_ext(data); break; default: break; } pa_data = data->next; - early_iounmap(data, PAGE_SIZE); + early_iounmap(data, map_len); } } -- cgit v1.2.3-58-ga151 From da6b737b9ab768dd06bb4b0395131d10e524cf83 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:37 +0100 Subject: x86: Add device tree support This patch adds minimal support for device tree on x86. The device tree blob is passed to the kernel via setup_data which requires at least boot protocol 2.09. Memory size, restricted memory regions, boot arguments are gathered the traditional way so things like cmd_line are just here to let the code compile. The current plan is use the device tree as an extension and to gather information which can not be enumerated and would have to be hardcoded otherwise. This includes things like - which devices are on this I2C/SPI bus? - how are the interrupts wired to IO APIC? - where could my hpet be? Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-3-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- Documentation/devicetree/booting-without-of.txt | 20 ++++++++++ arch/x86/Kconfig | 2 + arch/x86/include/asm/bootparam.h | 1 + arch/x86/include/asm/irq.h | 3 -- arch/x86/include/asm/prom.h | 48 ++++++++++++++++++++++- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/devicetree.c | 51 +++++++++++++++++++++++++ arch/x86/kernel/irq.c | 9 ----- arch/x86/kernel/setup.c | 4 ++ 9 files changed, 126 insertions(+), 13 deletions(-) create mode 100644 arch/x86/kernel/devicetree.c (limited to 'arch/x86') diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 28b1c9d3d351..55fd2623445b 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -13,6 +13,7 @@ Table of Contents I - Introduction 1) Entry point for arch/powerpc + 2) Entry point for arch/x86 II - The DT block format 1) Header @@ -225,6 +226,25 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. +2) Entry point for arch/x86 +------------------------------- + + There is one single 32bit entry point to the kernel at code32_start, + the decompressor (the real mode entry point goes to the same 32bit + entry point once it switched into protected mode). That entry point + supports one calling convention which is documented in + Documentation/x86/boot.txt + The physical pointer to the device-tree block (defined in chapter II) + is passed via setup_data which requires at least boot protocol 2.09. + The type filed is defined as + + #define SETUP_DTB 2 + + This device-tree is used as an extension to the "boot page". As such it + does not parse / consider data which is already covered by the boot + page. This includes memory size, reserved ranges, command line arguments + or initrd address. It simply holds information which can not be retrieved + otherwise like interrupt routing or a list of devices behind an I2C bus. II - The DT block format ======================== diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index efbae0c7521f..b4c2e9c67623 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -382,6 +382,8 @@ config X86_INTEL_CE depends on X86_32 depends on X86_EXTENDED_PLATFORM select X86_REBOOTFIXUPS + select OF + select OF_EARLY_FLATTREE ---help--- Select for the Intel CE media processor (CE4100) SOC. This option compiles in support for the CE4100 SOC for settop diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index c8bfe63a06de..e020d88ec02d 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -12,6 +12,7 @@ /* setup data types */ #define SETUP_NONE 0 #define SETUP_E820_EXT 1 +#define SETUP_DTB 2 /* extensible setup data list node */ struct setup_data { diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index c704b38c57a2..ba870bb6dd8e 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -10,9 +10,6 @@ #include #include -/* Even though we don't support this, supply it to appease OF */ -static inline void irq_dispose_mapping(unsigned int virq) { } - static inline int irq_canonicalize(int irq) { return ((irq == 2) ? 9 : irq); diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index b4ec95f07518..e46f2a2b57a1 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -1 +1,47 @@ -/* dummy prom.h; here to make linux/of.h's #includes happy */ +/* + * Definitions for Device tree / OpenFirmware handling on X86 + * + * based on arch/powerpc/include/asm/prom.h which is + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_X86_PROM_H +#define _ASM_X86_PROM_H +#ifndef __ASSEMBLY__ + +#include +#include + +#include +#include +#include + +#ifdef CONFIG_OF +extern void add_dtb(u64 data); +#else +static inline void add_dtb(u64 data) { } +#endif + +extern char cmd_line[COMMAND_LINE_SIZE]; + +#define pci_address_to_pio pci_address_to_pio +unsigned long pci_address_to_pio(phys_addr_t addr); + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + * + * FIXME: We really should implement proper virq handling like power, + * but that's going to be major surgery. + */ +static inline void irq_dispose_mapping(unsigned int virq) { } + +#define HAVE_ARCH_DEVTREE_FIXUPS + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 34244b2cd880..6ac5036adf42 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +obj-$(CONFIG_OF) += devicetree.o ### # 64 bit specific files diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c new file mode 100644 index 000000000000..0b8f0daef933 --- /dev/null +++ b/arch/x86/kernel/devicetree.c @@ -0,0 +1,51 @@ +/* + * Architecture specific OF callbacks. + */ +#include +#include +#include +#include +#include +#include +#include + +char __initdata cmd_line[COMMAND_LINE_SIZE]; + +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; + +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + /* + * The ioport address can be directly used by inX / outX + */ + BUG_ON(address >= (1 << 16)); + return (unsigned long)address; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +void __init early_init_dt_scan_chosen_arch(unsigned long node) +{ + BUG(); +} + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + BUG(); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS)); +} + +void __init add_dtb(u64 data) +{ + initial_boot_params = phys_to_virt((u64) (u32) data + + offsetof(struct setup_data, data)); +} diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 387b6a0c9e81..753136003af1 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -276,15 +276,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs) EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq); -#ifdef CONFIG_OF -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) -{ - return intspec[0]; -} -EXPORT_SYMBOL_GPL(irq_create_of_mapping); -#endif - #ifdef CONFIG_HOTPLUG_CPU /* A cpu has been removed from cpu_online_mask. Reset irq affinities. */ void fixup_irqs(void) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9521483ce58c..33dcbce1ab0f 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -113,6 +113,7 @@ #endif #include #include +#include /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. @@ -445,6 +446,9 @@ static void __init parse_setup_data(void) case SETUP_E820_EXT: parse_e820_ext(data); break; + case SETUP_DTB: + add_dtb(pa_data); + break; default: break; } -- cgit v1.2.3-58-ga151 From df2634f43f5106947f3735a0b61a6527a4b278cd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:38 +0100 Subject: x86: dtb: Add a device tree for CE4100 History: v1..v2: - dropped device_type except for cpu & pci. I have the compatible string for pci so I can drop the device_type once it is possible - I lowercased all compatible types. I will need to resend some patches which have upper case intel - The cpu had the same compatible string as the soc node. So I added to the soc node -immr for internel memory mapped registers. - I added generic names for all parts. - I reworked the i2c bars matching the way you suggested. I added a compatible node for the PCI device which only the PCI ids in its compatible string. The bars (each represents a complete i2c controller) have a "intel,ce4100-i2c-controller" compatible node. It is not used by the driver. The driver is probed via PCI ids (by the pci subsystem not OF) and matches the bar address against the ressource in the child node. Once there is a hit the node is attached. - The SPI driver is also probed via pci. However I also attached a compatible property based on PCI ids v2..v3: - intel,ce4100-immr become intel,ce4100-cp. cp stands for core peripherals. The Atom data sheet talks here about ACPI devices. Since we don't have ACPI this does not apply here. - The interrupt map is gone. There are now plenty of device nodes. - The "unit address string" got fixed, it uses not DD,V format. v3..v4: - added descriptions for compatible nodes introduced here: - intel,ce4100-ioapic - intel,ce4100-lapic - intel,ce4100-hpet - intel,ce4100 - intel,ce4100-cp - intel,ce4100-pci - added a description about I2C controller magic. - Added gpio-controller and gpio-cells property to gpio devices. Those properties are not (yet) used. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- .../devicetree/bindings/i2c/ce4100-i2c.txt | 93 +++++ Documentation/devicetree/bindings/x86/ce4100.txt | 38 ++ .../devicetree/bindings/x86/interrupt.txt | 29 ++ Documentation/devicetree/bindings/x86/timer.txt | 6 + arch/x86/platform/ce4100/falconfalls.dts | 428 +++++++++++++++++++++ 5 files changed, 594 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/ce4100-i2c.txt create mode 100644 Documentation/devicetree/bindings/x86/ce4100.txt create mode 100644 Documentation/devicetree/bindings/x86/interrupt.txt create mode 100644 Documentation/devicetree/bindings/x86/timer.txt create mode 100644 arch/x86/platform/ce4100/falconfalls.dts (limited to 'arch/x86') diff --git a/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt new file mode 100644 index 000000000000..569b16248514 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt @@ -0,0 +1,93 @@ +CE4100 I2C +---------- + +CE4100 has one PCI device which is described as the I2C-Controller. This +PCI device has three PCI-bars, each bar contains a complete I2C +controller. So we have a total of three independent I2C-Controllers +which share only an interrupt line. +The driver is probed via the PCI-ID and is gathering the information of +attached devices from the devices tree. +Grant Likely recommended to use the ranges property to map the PCI-Bar +number to its physical address and to use this to find the child nodes +of the specific I2C controller. This were his exact words: + + Here's where the magic happens. Each entry in + ranges describes how the parent pci address space + (middle group of 3) is translated to the local + address space (first group of 2) and the size of + each range (last cell). In this particular case, + the first cell of the local address is chosen to be + 1:1 mapped to the BARs, and the second is the + offset from be base of the BAR (which would be + non-zero if you had 2 or more devices mapped off + the same BAR) + + ranges allows the address mapping to be described + in a way that the OS can interpret without + requiring custom device driver code. + +This is an example which is used on FalconFalls: +------------------------------------------------ + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + + /* as described by Grant, the first number in the group of + * three is the bar number followed by the 64bit bar address + * followed by size of the mapping. The bar address + * requires also a valid translation in parents ranges + * property. + */ + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + + /* The first number in the reg property is the + * number of the bar + */ + reg = <0 0 0x100>; + + /* This I2C controller has no devices */ + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + /* This I2C controller has one gpio controller */ + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt new file mode 100644 index 000000000000..b49ae593a60b --- /dev/null +++ b/Documentation/devicetree/bindings/x86/ce4100.txt @@ -0,0 +1,38 @@ +CE4100 Device Tree Bindings +--------------------------- + +The CE4100 SoC uses for in core peripherals the following compatible +format: ,-. +Many of the "generic" devices like HPET or IO APIC have the ce4100 +name in their compatible property because they first appeared in this +SoC. + +The CPU node +------------ + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + +The reg property describes the CPU number. The lapic property points to +the local APIC timer. + +The SoC node +------------ + +This node describes the in-core peripherals. Required property: + compatible = "intel,ce4100-cp"; + +The PCI node +------------ +This node describes the PCI bus on the SoC. Its property should be + compatible = "intel,ce4100-pci", "pci"; + +If the OS is using the IO-APIC for interrupt routing then the reported +interrupt numbers for devices is no longer true. In order to obtain the +correct interrupt number, the child node which represents the device has +to contain the interrupt property. Besides the interrupt property it has +to contain at least the reg property containing the PCI bus address and +compatible property according to "PCI Bus Binding Revision 2.1". diff --git a/Documentation/devicetree/bindings/x86/interrupt.txt b/Documentation/devicetree/bindings/x86/interrupt.txt new file mode 100644 index 000000000000..8b0efb097e60 --- /dev/null +++ b/Documentation/devicetree/bindings/x86/interrupt.txt @@ -0,0 +1,29 @@ +Interrupt chips +--------------- + +* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) + + Required properties: + -------------------- + compatible = "intel,ce4100-ioapic"; + #interrupt-cells = <2>; + + Device's interrupt property: + + interrupts =

; + + The first number (P) represents the interrupt pin which is wired to the + IO APIC. The second number (S) represents the sense of interrupt which + should be configured and can be one of: + 0 - Edge Rising + 1 - Level Low + 2 - Level High + 3 - Edge Falling + +* Local APIC + Required property: + + compatible = "intel,ce4100-lapic"; + + This node is currently unused by Linux as the address of the local APIC + read from a MSR. diff --git a/Documentation/devicetree/bindings/x86/timer.txt b/Documentation/devicetree/bindings/x86/timer.txt new file mode 100644 index 000000000000..c688af58e3bd --- /dev/null +++ b/Documentation/devicetree/bindings/x86/timer.txt @@ -0,0 +1,6 @@ +Timers +------ + +* High Precision Event Timer (HPET) + Required property: + compatible = "intel,ce4100-hpet"; diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts new file mode 100644 index 000000000000..dc701ea58546 --- /dev/null +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -0,0 +1,428 @@ +/* + * CE4100 on Falcon Falls + * + * (c) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ +/dts-v1/; +/ { + model = "intel,falconfalls"; + compatible = "intel,falconfalls"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,ce4100-cp"; + ranges; + + ioapic1: interrupt-controller@fec00000 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0xfec00000 0x1000>; + }; + + timer@fed00000 { + compatible = "intel,ce4100-hpet"; + reg = <0xfed00000 0x200>; + }; + + lapic0: interrupt-controller@fee00000 { + compatible = "intel,ce4100-lapic"; + reg = <0xfee00000 0x1000>; + }; + + pci@3fc { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <0 0>; + ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000 + 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000 + 0x0000000 0 0x0 0x0 0 0x100>; + + /* Secondary IO-APIC */ + ioapic2: interrupt-controller@0,1 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0x100 0x0 0x0 0x0 0x0>; + assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>; + }; + + pci@1,0 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <1 1>; + ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; + + interrupt-parent = <&ioapic2>; + + display@2,0 { + compatible = "pci8086,2e5b.2", + "pci8086,2e5b", + "pciclass038000", + "pciclass0380"; + + reg = <0x11000 0x0 0x0 0x0 0x0>; + interrupts = <0 1>; + }; + + multimedia@3,0 { + compatible = "pci8086,2e5c.2", + "pci8086,2e5c", + "pciclass048000", + "pciclass0480"; + + reg = <0x11800 0x0 0x0 0x0 0x0>; + interrupts = <2 1>; + }; + + multimedia@4,0 { + compatible = "pci8086,2e5d.2", + "pci8086,2e5d", + "pciclass048000", + "pciclass0480"; + + reg = <0x12000 0x0 0x0 0x0 0x0>; + interrupts = <4 1>; + }; + + multimedia@4,1 { + compatible = "pci8086,2e5e.2", + "pci8086,2e5e", + "pciclass048000", + "pciclass0480"; + + reg = <0x12100 0x0 0x0 0x0 0x0>; + interrupts = <5 1>; + }; + + sound@6,0 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13000 0x0 0x0 0x0 0x0>; + interrupts = <6 1>; + }; + + sound@6,1 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13100 0x0 0x0 0x0 0x0>; + interrupts = <7 1>; + }; + + sound@6,2 { + compatible = "pci8086,2e60.2", + "pci8086,2e60", + "pciclass040100", + "pciclass0401"; + + reg = <0x13200 0x0 0x0 0x0 0x0>; + interrupts = <8 1>; + }; + + display@8,0 { + compatible = "pci8086,2e61.2", + "pci8086,2e61", + "pciclass038000", + "pciclass0380"; + + reg = <0x14000 0x0 0x0 0x0 0x0>; + interrupts = <9 1>; + }; + + display@8,1 { + compatible = "pci8086,2e62.2", + "pci8086,2e62", + "pciclass038000", + "pciclass0380"; + + reg = <0x14100 0x0 0x0 0x0 0x0>; + interrupts = <10 1>; + }; + + multimedia@8,2 { + compatible = "pci8086,2e63.2", + "pci8086,2e63", + "pciclass048000", + "pciclass0480"; + + reg = <0x14200 0x0 0x0 0x0 0x0>; + interrupts = <11 1>; + }; + + entertainment-encryption@9,0 { + compatible = "pci8086,2e64.2", + "pci8086,2e64", + "pciclass101000", + "pciclass1010"; + + reg = <0x14800 0x0 0x0 0x0 0x0>; + interrupts = <12 1>; + }; + + localbus@a,0 { + compatible = "pci8086,2e65.2", + "pci8086,2e65", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15000 0x0 0x0 0x0 0x0>; + }; + + serial@b,0 { + compatible = "pci8086,2e66.2", + "pci8086,2e66", + "pciclass070003", + "pciclass0700"; + + reg = <0x15800 0x0 0x0 0x0 0x0>; + interrupts = <14 1>; + }; + + gpio@b,1 { + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + #gpio-cells = <2>; + reg = <0x15900 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + gpio-controller; + }; + + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <0 0 0x100>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; + + smard-card@b,3 { + compatible = "pci8086,2e69.2", + "pci8086,2e69", + "pciclass070500", + "pciclass0705"; + + reg = <0x15b00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + }; + + spi-controller@b,4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = + "pci8086,2e6a.2", + "pci8086,2e6a", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15c00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + + dac@0 { + compatible = "ti,pcm1755"; + reg = <0>; + spi-max-frequency = <115200>; + }; + + dac@1 { + compatible = "ti,pcm1609a"; + reg = <1>; + spi-max-frequency = <115200>; + }; + + eeprom@2 { + compatible = "atmel,at93c46"; + reg = <2>; + spi-max-frequency = <115200>; + }; + }; + + multimedia@b,7 { + compatible = "pci8086,2e6d.2", + "pci8086,2e6d", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15f00 0x0 0x0 0x0 0x0>; + }; + + ethernet@c,0 { + compatible = "pci8086,2e6e.2", + "pci8086,2e6e", + "pciclass020000", + "pciclass0200"; + + reg = <0x16000 0x0 0x0 0x0 0x0>; + interrupts = <21 1>; + }; + + clock@c,1 { + compatible = "pci8086,2e6f.2", + "pci8086,2e6f", + "pciclassff0000", + "pciclassff00"; + + reg = <0x16100 0x0 0x0 0x0 0x0>; + interrupts = <3 1>; + }; + + usb@d,0 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16800 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + usb@d,1 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16900 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + sata@e,0 { + compatible = "pci8086,2e71.0", + "pci8086,2e71", + "pciclass010601", + "pciclass0106"; + + reg = <0x17000 0x0 0x0 0x0 0x0>; + interrupts = <23 3>; + }; + + flash@f,0 { + compatible = "pci8086,701.1", + "pci8086,701", + "pciclass050100", + "pciclass0501"; + + reg = <0x17800 0x0 0x0 0x0 0x0>; + interrupts = <13 1>; + }; + + entertainment-encryption@10,0 { + compatible = "pci8086,702.1", + "pci8086,702", + "pciclass101000", + "pciclass1010"; + + reg = <0x18000 0x0 0x0 0x0 0x0>; + }; + + co-processor@11,0 { + compatible = "pci8086,703.1", + "pci8086,703", + "pciclass0b4000", + "pciclass0b40"; + + reg = <0x18800 0x0 0x0 0x0 0x0>; + interrupts = <1 1>; + }; + + multimedia@12,0 { + compatible = "pci8086,704.0", + "pci8086,704", + "pciclass048000", + "pciclass0480"; + + reg = <0x19000 0x0 0x0 0x0 0x0>; + }; + }; + + isa@1f,0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "isa"; + ranges = <1 0 0 0 0 0x100>; + + rtc@70 { + compatible = "intel,ce4100-rtc", "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; + }; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 19c4f5f7f7e9c5db89a91627af2a426cfb5568de Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:39 +0100 Subject: x86: dtb: Add irq domain abstraction The here introduced irq_domain abstraction represents a generic irq controller. It is a subset of powerpc's irq_host which is going to be renamed to irq_domain and then become generic. This implementation will be removed once it is generic. The xlate callback is resposible to parse irq informations like irq type and number and returns the hardware irq number which is reported by the hardware as active. Signed-off-by: Sebastian Andrzej Siewior Tested-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-5-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/irq_controller.h | 12 +++++++++ arch/x86/include/asm/prom.h | 2 ++ arch/x86/kernel/devicetree.c | 46 ++++++++++++++++++++++++++++++++++- 3 files changed, 59 insertions(+), 1 deletion(-) create mode 100644 arch/x86/include/asm/irq_controller.h (limited to 'arch/x86') diff --git a/arch/x86/include/asm/irq_controller.h b/arch/x86/include/asm/irq_controller.h new file mode 100644 index 000000000000..423bbbddf36d --- /dev/null +++ b/arch/x86/include/asm/irq_controller.h @@ -0,0 +1,12 @@ +#ifndef __IRQ_CONTROLLER__ +#define __IRQ_CONTROLLER__ + +struct irq_domain { + int (*xlate)(struct irq_domain *h, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type); + void *priv; + struct device_node *controller; + struct list_head l; +}; + +#endif diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index e46f2a2b57a1..83833ac33dd1 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -20,9 +20,11 @@ #include #include #include +#include #ifdef CONFIG_OF extern void add_dtb(u64 data); +void add_interrupt_host(struct irq_domain *ih); #else static inline void add_dtb(u64 data) { } #endif diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 0b8f0daef933..ef98e4edada1 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -3,19 +3,63 @@ */ #include #include +#include #include #include #include #include #include +#include + char __initdata cmd_line[COMMAND_LINE_SIZE]; +static LIST_HEAD(irq_domains); +static DEFINE_RAW_SPINLOCK(big_irq_lock); + +void add_interrupt_host(struct irq_domain *ih) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_add(&ih->l, &irq_domains); + raw_spin_unlock_irqrestore(&big_irq_lock, flags); +} + +static struct irq_domain *get_ih_from_node(struct device_node *controller) +{ + struct irq_domain *ih, *found = NULL; + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_for_each_entry(ih, &irq_domains, l) { + if (ih->controller == controller) { + found = ih; + break; + } + } + raw_spin_unlock_irqrestore(&big_irq_lock, flags); + return found; +} unsigned int irq_create_of_mapping(struct device_node *controller, const u32 *intspec, unsigned int intsize) { - return intspec[0]; + struct irq_domain *ih; + u32 virq, type; + int ret; + ih = get_ih_from_node(controller); + if (!ih) + return 0; + ret = ih->xlate(ih, intspec, intsize, &virq, &type); + if (ret) + return ret; + if (type == IRQ_TYPE_NONE) + return virq; + /* set the mask if it is different from current */ + if (type == (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK)) + set_irq_type(virq, type); + return virq; } EXPORT_SYMBOL_GPL(irq_create_of_mapping); -- cgit v1.2.3-58-ga151 From 3879a6f32948330782889cebc4d74c4f2316c676 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:40 +0100 Subject: x86: dtb: Add early parsing of IO_APIC APIC and IO_APIC have to be added to the system early because native_init_IRQ() requires it. In order to obtain the address of the ioapic the device tree has to be unflattened so of_address_to_resource() works. The device tree is relocated to ensure it is always covered by the kernel mapping. That way the boot loader does not have to make any assumptions about kernel's memory layout. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: Dirk Brandewie LKML-Reference: <1298405266-1624-6-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 7 +++ arch/x86/kernel/devicetree.c | 110 ++++++++++++++++++++++++++++++++++++++++++- arch/x86/kernel/irqinit.c | 3 +- 3 files changed, 117 insertions(+), 3 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 83833ac33dd1..35ec32b47500 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -23,10 +23,17 @@ #include #ifdef CONFIG_OF +extern int of_ioapic; +extern u64 initial_dtb; extern void add_dtb(u64 data); +void x86_dtb_find_config(void); +void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); #else static inline void add_dtb(u64 data) { } +#define x86_dtb_find_config x86_init_noop +#define x86_dtb_get_config x86_init_uint_noop +#define of_ioapic 0 #endif extern char cmd_line[COMMAND_LINE_SIZE]; diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index ef98e4edada1..2739d5613a38 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -7,15 +7,20 @@ #include #include #include +#include #include #include #include +#include +__initdata u64 initial_dtb; char __initdata cmd_line[COMMAND_LINE_SIZE]; static LIST_HEAD(irq_domains); static DEFINE_RAW_SPINLOCK(big_irq_lock); +int __initdata of_ioapic; + void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -90,6 +95,107 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) void __init add_dtb(u64 data) { - initial_boot_params = phys_to_virt((u64) (u32) data + - offsetof(struct setup_data, data)); + initial_dtb = data + offsetof(struct setup_data, data); +} + +static void __init dtb_lapic_setup(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + if (apic_force_enable()) + return; + + smp_found_config = 1; + pic_mode = 1; + /* Required for ioapic registration */ + set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); + if (boot_cpu_physical_apicid == -1U) + boot_cpu_physical_apicid = read_apic_id(); + + generic_processor_info(boot_cpu_physical_apicid, + GET_APIC_VERSION(apic_read(APIC_LVR))); +#endif +} + +#ifdef CONFIG_X86_IO_APIC +static unsigned int ioapic_id; + +static void __init dtb_add_ioapic(struct device_node *dn) +{ + struct resource r; + int ret; + + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + printk(KERN_ERR "Can't obtain address from node %s.\n", + dn->full_name); + return; + } + mp_register_ioapic(++ioapic_id, r.start, gsi_top); +} + +static void __init dtb_ioapic_setup(void) +{ + struct device_node *dn; + + if (!smp_found_config) + return; + + for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic") + dtb_add_ioapic(dn); + + if (nr_ioapics) { + of_ioapic = 1; + return; + } + printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); + smp_found_config = 0; +} +#else +static void __init dtb_ioapic_setup(void) {} +#endif + +static void __init dtb_apic_setup(void) +{ + dtb_lapic_setup(); + dtb_ioapic_setup(); +} + +void __init x86_dtb_find_config(void) +{ + if (initial_dtb) + smp_found_config = 1; + else + printk(KERN_ERR "Missing device tree!.\n"); +} + +void __init x86_dtb_get_config(unsigned int unused) +{ + u32 size, map_len; + void *new_dtb; + + if (!initial_dtb) + return; + + map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), + (u64)sizeof(struct boot_param_header)); + + initial_boot_params = early_memremap(initial_dtb, map_len); + size = be32_to_cpu(initial_boot_params->totalsize); + if (map_len < size) { + early_iounmap(initial_boot_params, map_len); + initial_boot_params = early_memremap(initial_dtb, size); + map_len = size; + } + + new_dtb = alloc_bootmem(size); + memcpy(new_dtb, initial_boot_params, size); + early_iounmap(initial_boot_params, map_len); + + initial_boot_params = new_dtb; + + /* root level address cells */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + + unflatten_device_tree(); + dtb_apic_setup(); } diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index c752e973958d..4cadf8688dbd 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -25,6 +25,7 @@ #include #include #include +#include /* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: @@ -243,7 +244,7 @@ void __init native_init_IRQ(void) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } - if (!acpi_ioapic) + if (!acpi_ioapic && !of_ioapic) setup_irq(2, &irq2); #ifdef CONFIG_X86_32 -- cgit v1.2.3-58-ga151 From ffb9fc68dff38f811eeb24c15aba0418b6a8ee53 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:41 +0100 Subject: x86: dtb: Add device tree support for HPET Set hpet_address based on information provied form DTB Signed-off-by: Sebastian Andrzej Siewior Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: Dirk Brandewie LKML-Reference: <1298405266-1624-7-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/devicetree.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 2739d5613a38..dbb3bda40af9 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -11,6 +11,7 @@ #include #include +#include #include #include @@ -98,6 +99,23 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +static void __init dtb_setup_hpet(void) +{ + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-hpet"); + if (!dn) + return; + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + WARN_ON(1); + return; + } + hpet_address = r.start; +} + static void __init dtb_lapic_setup(void) { #ifdef CONFIG_X86_LOCAL_APIC @@ -197,5 +215,6 @@ void __init x86_dtb_get_config(unsigned int unused) of_scan_flat_dt(early_init_dt_scan_root, NULL); unflatten_device_tree(); + dtb_setup_hpet(); dtb_apic_setup(); } -- cgit v1.2.3-58-ga151 From 96e0a0797eba35b5420c710b928f19094b2d5c45 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:42 +0100 Subject: x86: dtb: Add support for PCI devices backed by dtb nodes x86_of_pci_init() does two things: - it provides a generic irq enable and disable function. enable queries the device tree for the interrupt information, calls ->xlate on the irq host and updates the pci->irq information for the device. - it walks through PCI bus(es) in the device tree and adds its children (device) nodes to appropriate pci_dev nodes in kernel. So the dtb node information is available at probe time of the PCI device. Adding a PCI bus based on the information in the device tree is currently not supported. Right now direct access via ioports is used. Signed-off-by: Sebastian Andrzej Siewior Tested-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-8-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 14 ++++++++ arch/x86/kernel/devicetree.c | 83 ++++++++++++++++++++++++++++++++++++++++++++ drivers/of/Kconfig | 2 +- drivers/of/of_pci.c | 1 + 4 files changed, 99 insertions(+), 1 deletion(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 35ec32b47500..8fcd519a44dc 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -16,6 +16,7 @@ #include #include +#include #include #include @@ -29,8 +30,21 @@ extern void add_dtb(u64 data); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); +void __cpuinit x86_of_pci_init(void); + +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) +{ + return pdev ? pdev->dev.of_node : NULL; +} + +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + return pci_device_to_OF_node(bus->self); +} + #else static inline void add_dtb(u64 data) { } +static inline void x86_of_pci_init(void) { } #define x86_dtb_find_config x86_init_noop #define x86_dtb_get_config x86_init_uint_noop #define of_ioapic 0 diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index dbb3bda40af9..7b574226e0a8 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -9,11 +9,15 @@ #include #include #include +#include #include +#include +#include #include #include #include +#include __initdata u64 initial_dtb; char __initdata cmd_line[COMMAND_LINE_SIZE]; @@ -99,6 +103,85 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +#ifdef CONFIG_PCI +static int x86_of_pci_irq_enable(struct pci_dev *dev) +{ + struct of_irq oirq; + u32 virq; + int ret; + u8 pin; + + ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (ret) + return ret; + if (!pin) + return 0; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) + return ret; + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + if (virq == 0) + return -EINVAL; + dev->irq = virq; + return 0; +} + +static void x86_of_pci_irq_disable(struct pci_dev *dev) +{ +} + +void __cpuinit x86_of_pci_init(void) +{ + struct device_node *np; + + pcibios_enable_irq = x86_of_pci_irq_enable; + pcibios_disable_irq = x86_of_pci_irq_disable; + + for_each_node_by_type(np, "pci") { + const void *prop; + struct pci_bus *bus; + unsigned int bus_min; + struct device_node *child; + + prop = of_get_property(np, "bus-range", NULL); + if (!prop) + continue; + bus_min = be32_to_cpup(prop); + + bus = pci_find_bus(0, bus_min); + if (!bus) { + printk(KERN_ERR "Can't find a node for bus %s.\n", + np->full_name); + continue; + } + + if (bus->self) + bus->self->dev.of_node = np; + else + bus->dev.of_node = np; + + for_each_child_of_node(np, child) { + struct pci_dev *dev; + u32 devfn; + + prop = of_get_property(child, "reg", NULL); + if (!prop) + continue; + + devfn = (be32_to_cpup(prop) >> 8) & 0xff; + dev = pci_get_slot(bus, devfn); + if (!dev) + continue; + dev->dev.of_node = child; + pci_dev_put(dev); + } + } +} +#endif + static void __init dtb_setup_hpet(void) { struct device_node *dn; diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index efabbf9dd607..d06a6374ed6c 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -71,7 +71,7 @@ config OF_MDIO config OF_PCI def_tristate PCI - depends on PCI && (PPC || MICROBLAZE) + depends on PCI && (PPC || MICROBLAZE || X86) help OpenFirmware PCI bus accessors diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c index 314535fa32c1..ac1ec54e4fd5 100644 --- a/drivers/of/of_pci.c +++ b/drivers/of/of_pci.c @@ -1,5 +1,6 @@ #include #include +#include #include /** -- cgit v1.2.3-58-ga151 From 9079b35364e75ce6b968a179f861d2f819f33e61 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:43 +0100 Subject: x86: dtb: Add generic bus probe For now we probe these busses and we change this to board dependent probes once we have to. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-9-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/devicetree.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 7b574226e0a8..0bc83bfa4ead 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -103,6 +103,25 @@ void __init add_dtb(u64 data) initial_dtb = data + offsetof(struct setup_data, data); } +/* + * CE4100 ids. Will be moved to machine_device_initcall() once we have it. + */ +static struct of_device_id __initdata ce4100_ids[] = { + { .compatible = "intel,ce4100-cp", }, + { .compatible = "isa", }, + { .compatible = "pci", }, + {}, +}; + +static int __init add_bus_probe(void) +{ + if (!initial_boot_params) + return 0; + + return of_platform_bus_probe(NULL, ce4100_ids, NULL); +} +module_init(add_bus_probe); + #ifdef CONFIG_PCI static int x86_of_pci_irq_enable(struct pci_dev *dev) { -- cgit v1.2.3-58-ga151 From bcc7c1244fcfd852b9f4590935491057e1cab9dd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:44 +0100 Subject: x86: ioapic: Add OF bindings for IO_APIC ioapic_xlate provides a translation from the information in device tree to ioapic related informations. This includes - obtaining hw irq which is the vector number "=> pin number + gsi" - obtaining type (level/edge/..) - programming this information into ioapic ioapic_add_ofnode adds an irq_domain based on informations from the device tree. This information (irq_domain) is required in order to map a device to its proper interrupt controller. [ tglx: Adapted to the io_apic changes, which let us move that whole code to devicetree.c ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-10-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 2 + arch/x86/kernel/devicetree.c | 104 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irqinit.c | 6 +++ 3 files changed, 112 insertions(+) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index 8fcd519a44dc..ae50131ad766 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -27,6 +27,7 @@ extern int of_ioapic; extern u64 initial_dtb; extern void add_dtb(u64 data); +extern void x86_add_irq_domains(void); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); void add_interrupt_host(struct irq_domain *ih); @@ -44,6 +45,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) #else static inline void add_dtb(u64 data) { } +static inline void x86_add_irq_domains(void) { } static inline void x86_of_pci_init(void) { } #define x86_dtb_find_config x86_init_noop #define x86_dtb_get_config x86_init_uint_noop diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 0bc83bfa4ead..2d65897a39d0 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -320,3 +320,107 @@ void __init x86_dtb_get_config(unsigned int unused) dtb_setup_hpet(); dtb_apic_setup(); } + +#ifdef CONFIG_X86_IO_APIC + +struct of_ioapic_type { + u32 out_type; + u32 trigger; + u32 polarity; +}; + +static struct of_ioapic_type of_ioapic_type[] = +{ + { + .out_type = IRQ_TYPE_EDGE_RISING, + .trigger = IOAPIC_EDGE, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_LEVEL_LOW, + .trigger = IOAPIC_LEVEL, + .polarity = 0, + }, + { + .out_type = IRQ_TYPE_LEVEL_HIGH, + .trigger = IOAPIC_LEVEL, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_EDGE_FALLING, + .trigger = IOAPIC_EDGE, + .polarity = 0, + }, +}; + +static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type) +{ + struct io_apic_irq_attr attr; + struct of_ioapic_type *it; + u32 line, idx, type; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + idx = (u32) id->priv; + *out_hwirq = line + mp_gsi_routing[idx].gsi_base; + + intspec++; + type = *intspec; + + if (type >= ARRAY_SIZE(of_ioapic_type)) + return -EINVAL; + + it = of_ioapic_type + type; + *out_type = it->out_type; + + set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); + + return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); +} + +static void __init ioapic_add_ofnode(struct device_node *np) +{ + struct resource r; + int i, ret; + + ret = of_address_to_resource(np, 0, &r); + if (ret) { + printk(KERN_ERR "Failed to obtain address for %s\n", + np->full_name); + return; + } + + for (i = 0; i < nr_ioapics; i++) { + if (r.start == mp_ioapics[i].apicaddr) { + struct irq_domain *id; + + id = kzalloc(sizeof(*id), GFP_KERNEL); + BUG_ON(!id); + id->controller = np; + id->xlate = ioapic_xlate; + id->priv = (void *)i; + add_interrupt_host(id); + return; + } + } + printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name); +} + +void __init x86_add_irq_domains(void) +{ + struct device_node *dp; + + if (!initial_boot_params) + return; + + for_each_node_with_property(dp, "interrupt-controller") { + if (of_device_is_compatible(dp, "intel,ce4100-ioapic")) + ioapic_add_ofnode(dp); + } +} +#else +void __init x86_add_irq_domains(void) { } +#endif diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 4cadf8688dbd..9f76f89f43a4 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -118,6 +118,12 @@ void __init init_IRQ(void) { int i; + /* + * We probably need a better place for this, but it works for + * now ... + */ + x86_add_irq_domains(); + /* * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15. * If these IRQ's are handled by legacy interrupt-controllers like PIC, -- cgit v1.2.3-58-ga151 From 1fa4163bdc199a0b80f9e333d718b3f65e901593 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:45 +0100 Subject: x86: ce4100: Use OF to setup devices Use device tree information to setup IO_APIC configuration, interrupt routing, HPET and everything else which cannot be enumerated by other means. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- arch/x86/platform/ce4100/ce4100.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index d2c0d51a7178..b3436d344b41 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -15,21 +15,19 @@ #include #include +#include #include +#include #include +#include static int ce4100_i8042_detect(void) { return 0; } -static void __init sdv_find_smp_config(void) -{ -} - #ifdef CONFIG_SERIAL_8250 - static unsigned int mem_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -118,6 +116,15 @@ static void __init sdv_arch_setup(void) sdv_serial_fixup(); } +#ifdef CONFIG_X86_IO_APIC +static void __cpuinit sdv_pci_init(void) +{ + x86_of_pci_init(); + /* We can't set this earlier, because we need to calibrate the timer */ + legacy_pic = &null_legacy_pic; +} +#endif + /* * CE4100 specific x86_init function overrides and early setup * calls. @@ -127,6 +134,11 @@ void __init x86_ce4100_early_setup(void) x86_init.oem.arch_setup = sdv_arch_setup; x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; - x86_init.mpparse.get_smp_config = x86_init_uint_noop; - x86_init.mpparse.find_smp_config = sdv_find_smp_config; + x86_init.mpparse.get_smp_config = x86_dtb_get_config; + x86_init.mpparse.find_smp_config = x86_dtb_find_config; + +#ifdef CONFIG_X86_IO_APIC + x86_init.pci.init_irq = sdv_pci_init; + x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; +#endif } -- cgit v1.2.3-58-ga151 From 3bcbaf6e08d8d82cde781997bd2c56dda87049b5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 22 Feb 2011 21:07:46 +0100 Subject: rtc: cmos: Add OF bindings This allows to load the OF driver based informations from the device tree. Systems without BIOS may need to perform some initialization. PowerPC creates a PNP device from the OF information and performs this kind of initialization in their private PCI quirk. This looks more generic. This patch also avoids registering the platform RTC driver on X86 if we have a device tree blob. Otherwise we would setup the device based on the hardcoded information in arch/x86 rather than the device tree based one. [ tglx: Changed "int of_have_populated_dt()" to bool as recommended by Grant ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dirk Brandewie Acked-by: Grant Likely Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org Cc: rtc-linux@googlegroups.com Cc: Alessandro Zummo LKML-Reference: <1298405266-1624-12-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner --- Documentation/devicetree/bindings/rtc/rtc-cmos.txt | 28 ++++++++++++++ arch/x86/kernel/rtc.c | 3 ++ drivers/rtc/rtc-cmos.c | 45 ++++++++++++++++++++++ include/linux/of.h | 12 ++++++ 4 files changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-cmos.txt (limited to 'arch/x86') diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt new file mode 100644 index 000000000000..7382989b3052 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt @@ -0,0 +1,28 @@ + Motorola mc146818 compatible RTC +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: + - compatible : "motorola,mc146818" + - reg : should contain registers location and length. + +Optional properties: + - interrupts : should contain interrupt. + - interrupt-parent : interrupt source phandle. + - ctrl-reg : Contains the initial value of the control register also + called "Register B". + - freq-reg : Contains the initial value of the frequency register also + called "Regsiter A". + +"Register A" and "B" are usually initialized by the firmware (BIOS for +instance). If this is not done, it can be performed by the driver. + +ISA Example: + + rtc@70 { + compatible = "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 6f39cab052d5..3f2ad2640d85 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -236,6 +237,8 @@ static __init int add_rtc_cmos(void) } } #endif + if (of_have_populated_dt()) + return 0; platform_device_register(&rtc_device); dev_info(&rtc_device.dev, diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index c7ff8df347e7..159b95e4b420 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -37,6 +37,8 @@ #include #include #include +#include +#include /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include @@ -1123,6 +1125,47 @@ static struct pnp_driver cmos_pnp_driver = { #endif /* CONFIG_PNP */ +#ifdef CONFIG_OF +static const struct of_device_id of_cmos_match[] = { + { + .compatible = "motorola,mc146818", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cmos_match); + +static __init void cmos_of_init(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct rtc_time time; + int ret; + const __be32 *val; + + if (!node) + return; + + val = of_get_property(node, "ctrl-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL); + + val = of_get_property(node, "freq-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); + + get_rtc_time(&time); + ret = rtc_valid_tm(&time); + if (ret) { + struct rtc_time def_time = { + .tm_year = 1, + .tm_mday = 1, + }; + set_rtc_time(&def_time); + } +} +#else +static inline void cmos_of_init(struct platform_device *pdev) {} +#define of_cmos_match NULL +#endif /*----------------------------------------------------------------*/ /* Platform setup should have set up an RTC device, when PNP is @@ -1131,6 +1174,7 @@ static struct pnp_driver cmos_pnp_driver = { static int __init cmos_platform_probe(struct platform_device *pdev) { + cmos_of_init(pdev); cmos_wake_setup(&pdev->dev); return cmos_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_IO, 0), @@ -1162,6 +1206,7 @@ static struct platform_driver cmos_platform_driver = { #ifdef CONFIG_PM .pm = &cmos_pm_ops, #endif + .of_match_table = of_cmos_match, } }; diff --git a/include/linux/of.h b/include/linux/of.h index d9dd664a6a9c..266db1d0baa9 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -70,6 +70,11 @@ extern struct device_node *allnodes; extern struct device_node *of_chosen; extern rwlock_t devtree_lock; +static inline bool of_have_populated_dt(void) +{ + return allnodes != NULL; +} + static inline bool of_node_is_root(const struct device_node *node) { return node && (node->parent == NULL); @@ -222,5 +227,12 @@ extern void of_attach_node(struct device_node *); extern void of_detach_node(struct device_node *); #endif +#else + +static inline bool of_have_populated_dt(void) +{ + return false; +} + #endif /* CONFIG_OF */ #endif /* _LINUX_OF_H */ -- cgit v1.2.3-58-ga151 From 4a66b1d95ad8baf6ab884a1c64461449b463eb78 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 24 Feb 2011 09:52:42 +0100 Subject: x86: dt: Fix OLPC=y/INTEL_CE=n build Both OLPC and CE4100 activate CONFIG_OF. OLPC uses PROMTREE while CE uses FLATTREE. Compiling for OLPC only breaks due to missing flat tree functions and variables. Use proper wrappers and provide an empty x86_flattree_get_config() inline so OF=y FLATTREE=n builds and works. [ tglx: Make it work with HPET_TIMER=n and make a function static ] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/prom.h | 1 - arch/x86/kernel/devicetree.c | 23 +++++++++++++++++++---- 2 files changed, 19 insertions(+), 5 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index ae50131ad766..f58361ba7357 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -30,7 +30,6 @@ extern void add_dtb(u64 data); extern void x86_add_irq_domains(void); void x86_dtb_find_config(void); void x86_dtb_get_config(unsigned int unused); -void add_interrupt_host(struct irq_domain *ih); void __cpuinit x86_of_pci_init(void); static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 2d65897a39d0..06e5e91939c5 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -26,7 +26,7 @@ static DEFINE_RAW_SPINLOCK(big_irq_lock); int __initdata of_ioapic; -void add_interrupt_host(struct irq_domain *ih) +static void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -115,7 +115,7 @@ static struct of_device_id __initdata ce4100_ids[] = { static int __init add_bus_probe(void) { - if (!initial_boot_params) + if (!of_have_populated_dt()) return 0; return of_platform_bus_probe(NULL, ce4100_ids, NULL); @@ -203,6 +203,7 @@ void __cpuinit x86_of_pci_init(void) static void __init dtb_setup_hpet(void) { +#ifdef CONFIG_HPET_TIMER struct device_node *dn; struct resource r; int ret; @@ -216,6 +217,7 @@ static void __init dtb_setup_hpet(void) return; } hpet_address = r.start; +#endif } static void __init dtb_lapic_setup(void) @@ -288,7 +290,8 @@ void __init x86_dtb_find_config(void) printk(KERN_ERR "Missing device tree!.\n"); } -void __init x86_dtb_get_config(unsigned int unused) +#ifdef CONFIG_OF_FLATTREE +static void __init x86_flattree_get_config(void) { u32 size, map_len; void *new_dtb; @@ -317,6 +320,18 @@ void __init x86_dtb_get_config(unsigned int unused) of_scan_flat_dt(early_init_dt_scan_root, NULL); unflatten_device_tree(); +} +#else +static inline void x86_flattree_get_config(void) { } +#endif + +void __init x86_dtb_get_config(unsigned int unused) +{ + x86_flattree_get_config(); + + if (!of_have_populated_dt()) + return; + dtb_setup_hpet(); dtb_apic_setup(); } @@ -413,7 +428,7 @@ void __init x86_add_irq_domains(void) { struct device_node *dp; - if (!initial_boot_params) + if (!of_have_populated_dt()) return; for_each_node_with_property(dp, "interrupt-controller") { -- cgit v1.2.3-58-ga151 From a906fdaacca49917d83e5032dfc31f694249ad10 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 25 Feb 2011 16:09:31 +0100 Subject: x86: dt: Cleanup local apic setup Up to now we force enable the local apic in the devicetree setup uncoditionally and set smp_found_config unconditionally to 1 when a devicetree blob is available. This breaks, when local apic is disabled in the Kconfig. Make it consistent by initializing device tree explicitely before smp_get_config() so a non lapic configuration could be used as well. To be functional that would require to implement PIT as an interrupt host, but the only user of this code until now is ce4100 which requires apics to be available. So we leave this up to those who need it. Tested-by: Sebastian Siewior Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/apic.h | 2 +- arch/x86/include/asm/prom.h | 6 ++---- arch/x86/kernel/apic/apic.c | 6 +++--- arch/x86/kernel/devicetree.c | 40 +++++++++++++++++++-------------------- arch/x86/kernel/setup.c | 2 +- arch/x86/platform/ce4100/ce4100.c | 4 ++-- 6 files changed, 29 insertions(+), 31 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 3c896946f4cc..4afe512120a9 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -240,7 +240,7 @@ extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern int APIC_init_uniprocessor(void); extern void enable_NMI_through_LVT0(void); -extern int apic_force_enable(void); +extern int apic_force_enable(unsigned long addr); /* * On 32bit this is mach-xxx local diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index f58361ba7357..971e0b46446e 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -28,9 +28,8 @@ extern int of_ioapic; extern u64 initial_dtb; extern void add_dtb(u64 data); extern void x86_add_irq_domains(void); -void x86_dtb_find_config(void); -void x86_dtb_get_config(unsigned int unused); void __cpuinit x86_of_pci_init(void); +void x86_dtb_init(void); static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) { @@ -46,8 +45,7 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) static inline void add_dtb(u64 data) { } static inline void x86_add_irq_domains(void) { } static inline void x86_of_pci_init(void) { } -#define x86_dtb_find_config x86_init_noop -#define x86_dtb_get_config x86_init_uint_noop +static inline void x86_dtb_init(void) { } #define of_ioapic 0 #endif diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index f0e079823c43..4f43312cfbf8 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1563,7 +1563,7 @@ static int apic_verify(void) return 0; } -int apic_force_enable(void) +int apic_force_enable(unsigned long addr) { u32 h, l; @@ -1579,7 +1579,7 @@ int apic_force_enable(void) if (!(l & MSR_IA32_APICBASE_ENABLE)) { pr_info("Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; wrmsr(MSR_IA32_APICBASE, l, h); enabled_via_apicbase = 1; } @@ -1620,7 +1620,7 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - if (apic_force_enable()) + if (apic_force_enable(APIC_DEFAULT_PHYS_BASE)) return -1; } else { if (apic_verify()) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 06e5e91939c5..7a8cebc9ff29 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -26,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(big_irq_lock); int __initdata of_ioapic; +#ifdef CONFIG_X86_IO_APIC static void add_interrupt_host(struct irq_domain *ih) { unsigned long flags; @@ -34,6 +35,7 @@ static void add_interrupt_host(struct irq_domain *ih) list_add(&ih->l, &irq_domains); raw_spin_unlock_irqrestore(&big_irq_lock, flags); } +#endif static struct irq_domain *get_ih_from_node(struct device_node *controller) { @@ -223,18 +225,28 @@ static void __init dtb_setup_hpet(void) static void __init dtb_lapic_setup(void) { #ifdef CONFIG_X86_LOCAL_APIC - if (apic_force_enable()) + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-lapic"); + if (!dn) + return; + + ret = of_address_to_resource(dn, 0, &r); + if (WARN_ON(ret)) return; + /* Did the boot loader setup the local APIC ? */ + if (!cpu_has_apic) { + if (apic_force_enable(r.start)) + return; + } smp_found_config = 1; pic_mode = 1; - /* Required for ioapic registration */ - set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr); - if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = read_apic_id(); - + register_lapic_address(r.start); generic_processor_info(boot_cpu_physical_apicid, - GET_APIC_VERSION(apic_read(APIC_LVR))); + GET_APIC_VERSION(apic_read(APIC_LVR))); #endif } @@ -259,9 +271,6 @@ static void __init dtb_ioapic_setup(void) { struct device_node *dn; - if (!smp_found_config) - return; - for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic") dtb_add_ioapic(dn); @@ -270,7 +279,6 @@ static void __init dtb_ioapic_setup(void) return; } printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); - smp_found_config = 0; } #else static void __init dtb_ioapic_setup(void) {} @@ -282,14 +290,6 @@ static void __init dtb_apic_setup(void) dtb_ioapic_setup(); } -void __init x86_dtb_find_config(void) -{ - if (initial_dtb) - smp_found_config = 1; - else - printk(KERN_ERR "Missing device tree!.\n"); -} - #ifdef CONFIG_OF_FLATTREE static void __init x86_flattree_get_config(void) { @@ -325,7 +325,7 @@ static void __init x86_flattree_get_config(void) static inline void x86_flattree_get_config(void) { } #endif -void __init x86_dtb_get_config(unsigned int unused) +void __init x86_dtb_init(void) { x86_flattree_get_config(); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 33dcbce1ab0f..b3143bc74e6c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1044,8 +1044,8 @@ void __init setup_arch(char **cmdline_p) * Read APIC and some other early information from ACPI tables. */ acpi_boot_init(); - sfi_init(); + x86_dtb_init(); /* * get boot-time SMP configuration: diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index b3436d344b41..68c0dbcc95be 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -134,8 +134,8 @@ void __init x86_ce4100_early_setup(void) x86_init.oem.arch_setup = sdv_arch_setup; x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; - x86_init.mpparse.get_smp_config = x86_dtb_get_config; - x86_init.mpparse.find_smp_config = x86_dtb_find_config; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; + x86_init.mpparse.find_smp_config = x86_init_noop; #ifdef CONFIG_X86_IO_APIC x86_init.pci.init_irq = sdv_pci_init; -- cgit v1.2.3-58-ga151 From ec8df88f6bd808db47ac7a06c96dcc90d7ed6ecc Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Fri, 11 Mar 2011 08:02:35 +0100 Subject: x86: Remove superflous goal definition of tsc_sync The extra tsc_sync.o goal definition is superflous. CONFIG_X86_64_SMP depends on CONFIG_SMP and tsc_sync.o is already in the definition of CONFIG_SMP. Signed-off-by: Henrik Kretzschmar Acked-by: Cyrill Gorcunov LKML-Reference: <1299826956-8607-1-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 6ac5036adf42..62445ba2f8a8 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -66,9 +66,9 @@ obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o +obj-$(CONFIG_SMP) += smpboot.o +obj-$(CONFIG_SMP) += tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o -obj-$(CONFIG_X86_64_SMP) += tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ -- cgit v1.2.3-58-ga151 From 25874a299ef8037df03ce4ada570bc4e42f9748f Mon Sep 17 00:00:00 2001 From: Henrik Kretzschmar Date: Fri, 11 Mar 2011 08:02:36 +0100 Subject: x86: Clean up apic.c and apic.h This patch moves some functions and variables into init sections, makes a function static and removes some lines of cruft. Signed-off-by: Henrik Kretzschmar Acked-by: Cyrill Gorcunov LKML-Reference: <1299826956-8607-2-git-send-email-henne@nachtwindheim.de> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/apic.h | 4 --- arch/x86/kernel/apic/apic.c | 65 +++++++++++++++------------------------------ 2 files changed, 22 insertions(+), 47 deletions(-) (limited to 'arch/x86') diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 4afe512120a9..5b7d5137e167 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -220,7 +220,6 @@ extern void enable_IR_x2apic(void); extern int get_physical_broadcast(void); -extern void apic_disable(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); extern void connect_bsp_APIC(void); @@ -228,7 +227,6 @@ extern void disconnect_bsp_APIC(int virt_wire_setup); extern void disable_local_APIC(void); extern void lapic_shutdown(void); extern int verify_local_APIC(void); -extern void cache_APIC_registers(void); extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); @@ -239,7 +237,6 @@ void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern int APIC_init_uniprocessor(void); -extern void enable_NMI_through_LVT0(void); extern int apic_force_enable(unsigned long addr); /* @@ -261,7 +258,6 @@ static inline void lapic_shutdown(void) { } #define local_apic_timer_c2_ok 1 static inline void init_apic_mappings(void) { } static inline void disable_local_APIC(void) { } -static inline void apic_disable(void) { } # define setup_boot_APIC_clock x86_init_noop # define setup_secondary_APIC_clock x86_init_noop #endif /* !CONFIG_X86_LOCAL_APIC */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 4f43312cfbf8..ffbf7c21bbc6 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -84,7 +84,7 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); * * +1=force-enable */ -static int force_enable_local_apic; +static int force_enable_local_apic __initdata; /* * APIC command line parameters */ @@ -154,7 +154,7 @@ early_param("nox2apic", setup_nox2apic); unsigned long mp_lapic_addr; int disable_apic; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __initdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -178,29 +178,8 @@ static struct resource lapic_resource = { static unsigned int calibration_result; -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt); -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt); -static void lapic_timer_broadcast(const struct cpumask *mask); static void apic_pm_activate(void); -/* - * The local apic timer can be used for any function which is CPU local. - */ -static struct clock_event_device lapic_clockevent = { - .name = "lapic", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, - .shift = 32, - .set_mode = lapic_timer_setup, - .set_next_event = lapic_next_event, - .broadcast = lapic_timer_broadcast, - .rating = 100, - .irq = -1, -}; -static DEFINE_PER_CPU(struct clock_event_device, lapic_events); - static unsigned long apic_phys; /* @@ -239,7 +218,7 @@ static int modern_apic(void) * right after this call apic become NOOP driven * so apic->write/read doesn't do anything */ -void apic_disable(void) +static void __init apic_disable(void) { pr_info("APIC: switched to apic NOOP\n"); apic = &apic_noop; @@ -283,23 +262,6 @@ u64 native_apic_icr_read(void) return icr1 | ((u64)icr2 << 32); } -/** - * enable_NMI_through_LVT0 - enable NMI through local vector table 0 - */ -void __cpuinit enable_NMI_through_LVT0(void) -{ - unsigned int v; - - /* unmask and set to NMI */ - v = APIC_DM_NMI; - - /* Level triggered for 82489DX (32bit mode) */ - if (!lapic_is_integrated()) - v |= APIC_LVT_LEVEL_TRIGGER; - - apic_write(APIC_LVT0, v); -} - #ifdef CONFIG_X86_32 /** * get_physical_broadcast - Get number of physical broadcast IDs @@ -509,6 +471,23 @@ static void lapic_timer_broadcast(const struct cpumask *mask) #endif } + +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + /* * Setup the local APIC timer for this CPU. Copy the initialized values * of the boot CPU and register the clock event in the framework. @@ -1538,7 +1517,7 @@ static int __init detect_init_APIC(void) } #else -static int apic_verify(void) +static int __init apic_verify(void) { u32 features, h, l; @@ -1563,7 +1542,7 @@ static int apic_verify(void) return 0; } -int apic_force_enable(unsigned long addr) +int __init apic_force_enable(unsigned long addr) { u32 h, l; -- cgit v1.2.3-58-ga151