From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/um/drivers/Makefile | 46 ++ arch/um/drivers/chan_kern.c | 577 +++++++++++++ arch/um/drivers/chan_user.c | 210 +++++ arch/um/drivers/cow.h | 42 + arch/um/drivers/cow_sys.h | 48 ++ arch/um/drivers/cow_user.c | 378 +++++++++ arch/um/drivers/daemon.h | 35 + arch/um/drivers/daemon_kern.c | 108 +++ arch/um/drivers/daemon_user.c | 197 +++++ arch/um/drivers/fd.c | 108 +++ arch/um/drivers/harddog_kern.c | 190 +++++ arch/um/drivers/harddog_user.c | 143 ++++ arch/um/drivers/hostaudio_kern.c | 352 ++++++++ arch/um/drivers/line.c | 681 ++++++++++++++++ arch/um/drivers/mcast.h | 30 + arch/um/drivers/mcast_kern.c | 143 ++++ arch/um/drivers/mcast_user.c | 177 ++++ arch/um/drivers/mconsole_kern.c | 619 ++++++++++++++ arch/um/drivers/mconsole_user.c | 215 +++++ arch/um/drivers/mmapper_kern.c | 150 ++++ arch/um/drivers/net_kern.c | 896 ++++++++++++++++++++ arch/um/drivers/net_user.c | 255 ++++++ arch/um/drivers/null.c | 56 ++ arch/um/drivers/pcap_kern.c | 123 +++ arch/um/drivers/pcap_user.c | 143 ++++ arch/um/drivers/pcap_user.h | 31 + arch/um/drivers/port.h | 30 + arch/um/drivers/port_kern.c | 309 +++++++ arch/um/drivers/port_user.c | 225 +++++ arch/um/drivers/pty.c | 162 ++++ arch/um/drivers/random.c | 122 +++ arch/um/drivers/slip.h | 39 + arch/um/drivers/slip_kern.c | 109 +++ arch/um/drivers/slip_proto.h | 93 +++ arch/um/drivers/slip_user.c | 280 +++++++ arch/um/drivers/slirp.h | 51 ++ arch/um/drivers/slirp_kern.c | 135 +++ arch/um/drivers/slirp_user.c | 201 +++++ arch/um/drivers/ssl.c | 251 ++++++ arch/um/drivers/ssl.h | 23 + arch/um/drivers/stderr_console.c | 45 + arch/um/drivers/stdio_console.c | 205 +++++ arch/um/drivers/stdio_console.h | 21 + arch/um/drivers/tty.c | 92 +++ arch/um/drivers/ubd_kern.c | 1669 ++++++++++++++++++++++++++++++++++++++ arch/um/drivers/ubd_user.c | 75 ++ arch/um/drivers/xterm.c | 225 +++++ arch/um/drivers/xterm.h | 22 + arch/um/drivers/xterm_kern.c | 93 +++ 49 files changed, 10430 insertions(+) create mode 100644 arch/um/drivers/Makefile create mode 100644 arch/um/drivers/chan_kern.c create mode 100644 arch/um/drivers/chan_user.c create mode 100644 arch/um/drivers/cow.h create mode 100644 arch/um/drivers/cow_sys.h create mode 100644 arch/um/drivers/cow_user.c create mode 100644 arch/um/drivers/daemon.h create mode 100644 arch/um/drivers/daemon_kern.c create mode 100644 arch/um/drivers/daemon_user.c create mode 100644 arch/um/drivers/fd.c create mode 100644 arch/um/drivers/harddog_kern.c create mode 100644 arch/um/drivers/harddog_user.c create mode 100644 arch/um/drivers/hostaudio_kern.c create mode 100644 arch/um/drivers/line.c create mode 100644 arch/um/drivers/mcast.h create mode 100644 arch/um/drivers/mcast_kern.c create mode 100644 arch/um/drivers/mcast_user.c create mode 100644 arch/um/drivers/mconsole_kern.c create mode 100644 arch/um/drivers/mconsole_user.c create mode 100644 arch/um/drivers/mmapper_kern.c create mode 100644 arch/um/drivers/net_kern.c create mode 100644 arch/um/drivers/net_user.c create mode 100644 arch/um/drivers/null.c create mode 100644 arch/um/drivers/pcap_kern.c create mode 100644 arch/um/drivers/pcap_user.c create mode 100644 arch/um/drivers/pcap_user.h create mode 100644 arch/um/drivers/port.h create mode 100644 arch/um/drivers/port_kern.c create mode 100644 arch/um/drivers/port_user.c create mode 100644 arch/um/drivers/pty.c create mode 100644 arch/um/drivers/random.c create mode 100644 arch/um/drivers/slip.h create mode 100644 arch/um/drivers/slip_kern.c create mode 100644 arch/um/drivers/slip_proto.h create mode 100644 arch/um/drivers/slip_user.c create mode 100644 arch/um/drivers/slirp.h create mode 100644 arch/um/drivers/slirp_kern.c create mode 100644 arch/um/drivers/slirp_user.c create mode 100644 arch/um/drivers/ssl.c create mode 100644 arch/um/drivers/ssl.h create mode 100644 arch/um/drivers/stderr_console.c create mode 100644 arch/um/drivers/stdio_console.c create mode 100644 arch/um/drivers/stdio_console.h create mode 100644 arch/um/drivers/tty.c create mode 100644 arch/um/drivers/ubd_kern.c create mode 100644 arch/um/drivers/ubd_user.c create mode 100644 arch/um/drivers/xterm.c create mode 100644 arch/um/drivers/xterm.h create mode 100644 arch/um/drivers/xterm_kern.c (limited to 'arch/um/drivers') diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile new file mode 100644 index 000000000000..323f72c64cd2 --- /dev/null +++ b/arch/um/drivers/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2000, 2002, 2003 Jeff Dike (jdike@karaya.com) +# Licensed under the GPL +# + +# pcap is broken in 2.5 because kbuild doesn't allow pcap.a to be linked +# in to pcap.o + +slip-objs := slip_kern.o slip_user.o +slirp-objs := slirp_kern.o slirp_user.o +daemon-objs := daemon_kern.o daemon_user.o +mcast-objs := mcast_kern.o mcast_user.o +#pcap-objs := pcap_kern.o pcap_user.o $(PCAP) +net-objs := net_kern.o net_user.o +mconsole-objs := mconsole_kern.o mconsole_user.o +hostaudio-objs := hostaudio_kern.o +ubd-objs := ubd_kern.o ubd_user.o +port-objs := port_kern.o port_user.o +harddog-objs := harddog_kern.o harddog_user.o + +obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o +obj-$(CONFIG_SSL) += ssl.o +obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o + +obj-$(CONFIG_UML_NET_SLIP) += slip.o +obj-$(CONFIG_UML_NET_SLIRP) += slirp.o +obj-$(CONFIG_UML_NET_DAEMON) += daemon.o +obj-$(CONFIG_UML_NET_MCAST) += mcast.o +#obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP) +obj-$(CONFIG_UML_NET) += net.o +obj-$(CONFIG_MCONSOLE) += mconsole.o +obj-$(CONFIG_MMAPPER) += mmapper_kern.o +obj-$(CONFIG_BLK_DEV_UBD) += ubd.o +obj-$(CONFIG_HOSTAUDIO) += hostaudio.o +obj-$(CONFIG_NULL_CHAN) += null.o +obj-$(CONFIG_PORT_CHAN) += port.o +obj-$(CONFIG_PTY_CHAN) += pty.o +obj-$(CONFIG_TTY_CHAN) += tty.o +obj-$(CONFIG_XTERM_CHAN) += xterm.o xterm_kern.o +obj-$(CONFIG_UML_WATCHDOG) += harddog.o +obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o +obj-$(CONFIG_UML_RANDOM) += random.o + +USER_OBJS := fd.o null.o pty.o tty.o xterm.o + +include arch/um/scripts/Makefile.rules diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c new file mode 100644 index 000000000000..1f77deb3fd23 --- /dev/null +++ b/arch/um/drivers/chan_kern.c @@ -0,0 +1,577 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "chan_kern.h" +#include "user_util.h" +#include "kern.h" +#include "irq_user.h" +#include "sigio.h" +#include "line.h" +#include "os.h" + +#ifdef CONFIG_NOCONFIG_CHAN +static void *not_configged_init(char *str, int device, struct chan_opts *opts) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(NULL); +} + +static int not_configged_open(int input, int output, int primary, void *data, + char **dev_out) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(-ENODEV); +} + +static void not_configged_close(int fd, void *data) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); +} + +static int not_configged_read(int fd, char *c_out, void *data) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(-EIO); +} + +static int not_configged_write(int fd, const char *buf, int len, void *data) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(-EIO); +} + +static int not_configged_console_write(int fd, const char *buf, int len, + void *data) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(-EIO); +} + +static int not_configged_window_size(int fd, void *data, unsigned short *rows, + unsigned short *cols) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); + return(-ENODEV); +} + +static void not_configged_free(void *data) +{ + printk(KERN_ERR "Using a channel type which is configured out of " + "UML\n"); +} + +static struct chan_ops not_configged_ops = { + .init = not_configged_init, + .open = not_configged_open, + .close = not_configged_close, + .read = not_configged_read, + .write = not_configged_write, + .console_write = not_configged_console_write, + .window_size = not_configged_window_size, + .free = not_configged_free, + .winch = 0, +}; +#endif /* CONFIG_NOCONFIG_CHAN */ + +void generic_close(int fd, void *unused) +{ + os_close_file(fd); +} + +int generic_read(int fd, char *c_out, void *unused) +{ + int n; + + n = os_read_file(fd, c_out, sizeof(*c_out)); + + if(n == -EAGAIN) + return(0); + else if(n == 0) + return(-EIO); + return(n); +} + +/* XXX Trivial wrapper around os_write_file */ + +int generic_write(int fd, const char *buf, int n, void *unused) +{ + return(os_write_file(fd, buf, n)); +} + +int generic_window_size(int fd, void *unused, unsigned short *rows_out, + unsigned short *cols_out) +{ + int rows, cols; + int ret; + + ret = os_window_size(fd, &rows, &cols); + if(ret < 0) + return(ret); + + ret = ((*rows_out != rows) || (*cols_out != cols)); + + *rows_out = rows; + *cols_out = cols; + + return(ret); +} + +void generic_free(void *data) +{ + kfree(data); +} + +static void tty_receive_char(struct tty_struct *tty, char ch) +{ + if(tty == NULL) return; + + if(I_IXON(tty) && !I_IXOFF(tty) && !tty->raw) { + if(ch == STOP_CHAR(tty)){ + stop_tty(tty); + return; + } + else if(ch == START_CHAR(tty)){ + start_tty(tty); + return; + } + } + + if((tty->flip.flag_buf_ptr == NULL) || + (tty->flip.char_buf_ptr == NULL)) + return; + tty_insert_flip_char(tty, ch, TTY_NORMAL); +} + +static int open_one_chan(struct chan *chan, int input, int output, int primary) +{ + int fd; + + if(chan->opened) return(0); + if(chan->ops->open == NULL) fd = 0; + else fd = (*chan->ops->open)(input, output, primary, chan->data, + &chan->dev); + if(fd < 0) return(fd); + chan->fd = fd; + + chan->opened = 1; + return(0); +} + +int open_chan(struct list_head *chans) +{ + struct list_head *ele; + struct chan *chan; + int ret, err = 0; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + ret = open_one_chan(chan, chan->input, chan->output, + chan->primary); + if(chan->primary) err = ret; + } + return(err); +} + +void chan_enable_winch(struct list_head *chans, struct tty_struct *tty) +{ + struct list_head *ele; + struct chan *chan; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(chan->primary && chan->output && chan->ops->winch){ + register_winch(chan->fd, tty); + return; + } + } +} + +void enable_chan(struct list_head *chans, struct tty_struct *tty) +{ + struct list_head *ele; + struct chan *chan; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(!chan->opened) continue; + + line_setup_irq(chan->fd, chan->input, chan->output, tty); + } +} + +void close_chan(struct list_head *chans) +{ + struct chan *chan; + + /* Close in reverse order as open in case more than one of them + * refers to the same device and they save and restore that device's + * state. Then, the first one opened will have the original state, + * so it must be the last closed. + */ + list_for_each_entry_reverse(chan, chans, list) { + if(!chan->opened) continue; + if(chan->ops->close != NULL) + (*chan->ops->close)(chan->fd, chan->data); + chan->opened = 0; + chan->fd = -1; + } +} + +int write_chan(struct list_head *chans, const char *buf, int len, + int write_irq) +{ + struct list_head *ele; + struct chan *chan = NULL; + int n, ret = 0; + + list_for_each(ele, chans) { + chan = list_entry(ele, struct chan, list); + if (!chan->output || (chan->ops->write == NULL)) + continue; + n = chan->ops->write(chan->fd, buf, len, chan->data); + if (chan->primary) { + ret = n; + if ((ret == -EAGAIN) || ((ret >= 0) && (ret < len))) + reactivate_fd(chan->fd, write_irq); + } + } + return(ret); +} + +int console_write_chan(struct list_head *chans, const char *buf, int len) +{ + struct list_head *ele; + struct chan *chan; + int n, ret = 0; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(!chan->output || (chan->ops->console_write == NULL)) + continue; + n = chan->ops->console_write(chan->fd, buf, len, chan->data); + if(chan->primary) ret = n; + } + return(ret); +} + +int console_open_chan(struct line *line, struct console *co, struct chan_opts *opts) +{ + if (!list_empty(&line->chan_list)) + return 0; + + if (0 != parse_chan_pair(line->init_str, &line->chan_list, + line->init_pri, co->index, opts)) + return -1; + if (0 != open_chan(&line->chan_list)) + return -1; + printk("Console initialized on /dev/%s%d\n",co->name,co->index); + return 0; +} + +int chan_window_size(struct list_head *chans, unsigned short *rows_out, + unsigned short *cols_out) +{ + struct list_head *ele; + struct chan *chan; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(chan->primary){ + if(chan->ops->window_size == NULL) return(0); + return(chan->ops->window_size(chan->fd, chan->data, + rows_out, cols_out)); + } + } + return(0); +} + +void free_one_chan(struct chan *chan) +{ + list_del(&chan->list); + if(chan->ops->free != NULL) + (*chan->ops->free)(chan->data); + free_irq_by_fd(chan->fd); + if(chan->primary && chan->output) ignore_sigio_fd(chan->fd); + kfree(chan); +} + +void free_chan(struct list_head *chans) +{ + struct list_head *ele, *next; + struct chan *chan; + + list_for_each_safe(ele, next, chans){ + chan = list_entry(ele, struct chan, list); + free_one_chan(chan); + } +} + +static int one_chan_config_string(struct chan *chan, char *str, int size, + char **error_out) +{ + int n = 0; + + if(chan == NULL){ + CONFIG_CHUNK(str, size, n, "none", 1); + return(n); + } + + CONFIG_CHUNK(str, size, n, chan->ops->type, 0); + + if(chan->dev == NULL){ + CONFIG_CHUNK(str, size, n, "", 1); + return(n); + } + + CONFIG_CHUNK(str, size, n, ":", 0); + CONFIG_CHUNK(str, size, n, chan->dev, 0); + + return(n); +} + +static int chan_pair_config_string(struct chan *in, struct chan *out, + char *str, int size, char **error_out) +{ + int n; + + n = one_chan_config_string(in, str, size, error_out); + str += n; + size -= n; + + if(in == out){ + CONFIG_CHUNK(str, size, n, "", 1); + return(n); + } + + CONFIG_CHUNK(str, size, n, ",", 1); + n = one_chan_config_string(out, str, size, error_out); + str += n; + size -= n; + CONFIG_CHUNK(str, size, n, "", 1); + + return(n); +} + +int chan_config_string(struct list_head *chans, char *str, int size, + char **error_out) +{ + struct list_head *ele; + struct chan *chan, *in = NULL, *out = NULL; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(!chan->primary) + continue; + if(chan->input) + in = chan; + if(chan->output) + out = chan; + } + + return(chan_pair_config_string(in, out, str, size, error_out)); +} + +struct chan_type { + char *key; + struct chan_ops *ops; +}; + +struct chan_type chan_table[] = { + { "fd", &fd_ops }, + +#ifdef CONFIG_NULL_CHAN + { "null", &null_ops }, +#else + { "null", ¬_configged_ops }, +#endif + +#ifdef CONFIG_PORT_CHAN + { "port", &port_ops }, +#else + { "port", ¬_configged_ops }, +#endif + +#ifdef CONFIG_PTY_CHAN + { "pty", &pty_ops }, + { "pts", &pts_ops }, +#else + { "pty", ¬_configged_ops }, + { "pts", ¬_configged_ops }, +#endif + +#ifdef CONFIG_TTY_CHAN + { "tty", &tty_ops }, +#else + { "tty", ¬_configged_ops }, +#endif + +#ifdef CONFIG_XTERM_CHAN + { "xterm", &xterm_ops }, +#else + { "xterm", ¬_configged_ops }, +#endif +}; + +static struct chan *parse_chan(char *str, int pri, int device, + struct chan_opts *opts) +{ + struct chan_type *entry; + struct chan_ops *ops; + struct chan *chan; + void *data; + int i; + + ops = NULL; + data = NULL; + for(i = 0; i < sizeof(chan_table)/sizeof(chan_table[0]); i++){ + entry = &chan_table[i]; + if(!strncmp(str, entry->key, strlen(entry->key))){ + ops = entry->ops; + str += strlen(entry->key); + break; + } + } + if(ops == NULL){ + printk(KERN_ERR "parse_chan couldn't parse \"%s\"\n", + str); + return(NULL); + } + if(ops->init == NULL) return(NULL); + data = (*ops->init)(str, device, opts); + if(data == NULL) return(NULL); + + chan = kmalloc(sizeof(*chan), GFP_KERNEL); + if(chan == NULL) return(NULL); + *chan = ((struct chan) { .list = LIST_HEAD_INIT(chan->list), + .primary = 1, + .input = 0, + .output = 0, + .opened = 0, + .fd = -1, + .pri = pri, + .ops = ops, + .data = data }); + return(chan); +} + +int parse_chan_pair(char *str, struct list_head *chans, int pri, int device, + struct chan_opts *opts) +{ + struct chan *new, *chan; + char *in, *out; + + if(!list_empty(chans)){ + chan = list_entry(chans->next, struct chan, list); + if(chan->pri >= pri) return(0); + free_chan(chans); + INIT_LIST_HEAD(chans); + } + + out = strchr(str, ','); + if(out != NULL){ + in = str; + *out = '\0'; + out++; + new = parse_chan(in, pri, device, opts); + if(new == NULL) return(-1); + new->input = 1; + list_add(&new->list, chans); + + new = parse_chan(out, pri, device, opts); + if(new == NULL) return(-1); + list_add(&new->list, chans); + new->output = 1; + } + else { + new = parse_chan(str, pri, device, opts); + if(new == NULL) return(-1); + list_add(&new->list, chans); + new->input = 1; + new->output = 1; + } + return(0); +} + +int chan_out_fd(struct list_head *chans) +{ + struct list_head *ele; + struct chan *chan; + + list_for_each(ele, chans){ + chan = list_entry(ele, struct chan, list); + if(chan->primary && chan->output) + return(chan->fd); + } + return(-1); +} + +void chan_interrupt(struct list_head *chans, struct work_struct *task, + struct tty_struct *tty, int irq) +{ + struct list_head *ele, *next; + struct chan *chan; + int err; + char c; + + list_for_each_safe(ele, next, chans){ + chan = list_entry(ele, struct chan, list); + if(!chan->input || (chan->ops->read == NULL)) continue; + do { + if((tty != NULL) && + (tty->flip.count >= TTY_FLIPBUF_SIZE)){ + schedule_work(task); + goto out; + } + err = chan->ops->read(chan->fd, &c, chan->data); + if(err > 0) + tty_receive_char(tty, c); + } while(err > 0); + + if(err == 0) reactivate_fd(chan->fd, irq); + if(err == -EIO){ + if(chan->primary){ + if(tty != NULL) + tty_hangup(tty); + line_disable(tty, irq); + close_chan(chans); + free_chan(chans); + return; + } + else { + if(chan->ops->close != NULL) + chan->ops->close(chan->fd, chan->data); + free_one_chan(chan); + } + } + } + out: + if(tty) tty_flip_buffer_push(tty); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c new file mode 100644 index 000000000000..583b8e137c33 --- /dev/null +++ b/arch/um/drivers/chan_user.c @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "kern_util.h" +#include "user_util.h" +#include "chan_user.h" +#include "user.h" +#include "helper.h" +#include "os.h" +#include "choose-mode.h" +#include "mode.h" + +int generic_console_write(int fd, const char *buf, int n, void *unused) +{ + struct termios save, new; + int err; + + if(isatty(fd)){ + CATCH_EINTR(err = tcgetattr(fd, &save)); + if (err) + goto error; + new = save; + /* The terminal becomes a bit less raw, to handle \n also as + * "Carriage Return", not only as "New Line". Otherwise, the new + * line won't start at the first column.*/ + new.c_oflag |= OPOST; + CATCH_EINTR(err = tcsetattr(fd, TCSAFLUSH, &new)); + if (err) + goto error; + } + err = generic_write(fd, buf, n, NULL); + /* Restore raw mode, in any case; we *must* ignore any error apart + * EINTR, except for debug.*/ + if(isatty(fd)) + CATCH_EINTR(tcsetattr(fd, TCSAFLUSH, &save)); + return(err); +error: + return(-errno); +} + +/* + * UML SIGWINCH handling + * + * The point of this is to handle SIGWINCH on consoles which have host ttys and + * relay them inside UML to whatever might be running on the console and cares + * about the window size (since SIGWINCH notifies about terminal size changes). + * + * So, we have a separate thread for each host tty attached to a UML device + * (side-issue - I'm annoyed that one thread can't have multiple controlling + * ttys for purposed of handling SIGWINCH, but I imagine there are other reasons + * that doesn't make any sense). + * + * SIGWINCH can't be received synchronously, so you have to set up to receive it + * as a signal. That being the case, if you are going to wait for it, it is + * convenient to sit in a pause() and wait for the signal to bounce you out of + * it (see below for how we make sure to exit only on SIGWINCH). + */ + +static void winch_handler(int sig) +{ +} + +struct winch_data { + int pty_fd; + int pipe_fd; + int close_me; +}; + +static int winch_thread(void *arg) +{ + struct winch_data *data = arg; + sigset_t sigs; + int pty_fd, pipe_fd; + int count, err; + char c = 1; + + os_close_file(data->close_me); + pty_fd = data->pty_fd; + pipe_fd = data->pipe_fd; + count = os_write_file(pipe_fd, &c, sizeof(c)); + if(count != sizeof(c)) + printk("winch_thread : failed to write synchronization " + "byte, err = %d\n", -count); + + /* We are not using SIG_IGN on purpose, so don't fix it as I thought to + * do! If using SIG_IGN, the pause() call below would not stop on + * SIGWINCH. */ + + signal(SIGWINCH, winch_handler); + sigfillset(&sigs); + sigdelset(&sigs, SIGWINCH); + /* Block anything else than SIGWINCH. */ + if(sigprocmask(SIG_SETMASK, &sigs, NULL) < 0){ + printk("winch_thread : sigprocmask failed, errno = %d\n", + errno); + exit(1); + } + + if(setsid() < 0){ + printk("winch_thread : setsid failed, errno = %d\n", errno); + exit(1); + } + + err = os_new_tty_pgrp(pty_fd, os_getpid()); + if(err < 0){ + printk("winch_thread : new_tty_pgrp failed, err = %d\n", -err); + exit(1); + } + + /* These are synchronization calls between various UML threads on the + * host - since they are not different kernel threads, we cannot use + * kernel semaphores. We don't use SysV semaphores because they are + * persistant. */ + count = os_read_file(pipe_fd, &c, sizeof(c)); + if(count != sizeof(c)) + printk("winch_thread : failed to read synchronization byte, " + "err = %d\n", -count); + + while(1){ + /* This will be interrupted by SIGWINCH only, since other signals + * are blocked.*/ + pause(); + + count = os_write_file(pipe_fd, &c, sizeof(c)); + if(count != sizeof(c)) + printk("winch_thread : write failed, err = %d\n", + -count); + } +} + +static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out) +{ + struct winch_data data; + unsigned long stack; + int fds[2], pid, n, err; + char c; + + err = os_pipe(fds, 1, 1); + if(err < 0){ + printk("winch_tramp : os_pipe failed, err = %d\n", -err); + return(err); + } + + data = ((struct winch_data) { .pty_fd = fd, + .pipe_fd = fds[1], + .close_me = fds[0] } ); + pid = run_helper_thread(winch_thread, &data, 0, &stack, 0); + if(pid < 0){ + printk("fork of winch_thread failed - errno = %d\n", errno); + return(pid); + } + + os_close_file(fds[1]); + *fd_out = fds[0]; + n = os_read_file(fds[0], &c, sizeof(c)); + if(n != sizeof(c)){ + printk("winch_tramp : failed to read synchronization byte\n"); + printk("read failed, err = %d\n", -n); + printk("fd %d will not support SIGWINCH\n", fd); + *fd_out = -1; + } + return(pid); +} + +void register_winch(int fd, struct tty_struct *tty) +{ + int pid, thread, thread_fd; + int count; + char c = 1; + + if(!isatty(fd)) + return; + + pid = tcgetpgrp(fd); + if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd, + tty) && (pid == -1)){ + thread = winch_tramp(fd, tty, &thread_fd); + if(fd != -1){ + register_winch_irq(thread_fd, fd, thread, tty); + + count = os_write_file(thread_fd, &c, sizeof(c)); + if(count != sizeof(c)) + printk("register_winch : failed to write " + "synchronization byte, err = %d\n", + -count); + } + } +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h new file mode 100644 index 000000000000..4fcbe8b1b77e --- /dev/null +++ b/arch/um/drivers/cow.h @@ -0,0 +1,42 @@ +#ifndef __COW_H__ +#define __COW_H__ + +#include + +#if __BYTE_ORDER == __BIG_ENDIAN +# define ntohll(x) (x) +# define htonll(x) (x) +#elif __BYTE_ORDER == __LITTLE_ENDIAN +# define ntohll(x) bswap_64(x) +# define htonll(x) bswap_64(x) +#else +#error "__BYTE_ORDER not defined" +#endif + +extern int init_cow_file(int fd, char *cow_file, char *backing_file, + int sectorsize, int alignment, int *bitmap_offset_out, + unsigned long *bitmap_len_out, int *data_offset_out); + +extern int file_reader(__u64 offset, char *buf, int len, void *arg); +extern int read_cow_header(int (*reader)(__u64, char *, int, void *), + void *arg, __u32 *version_out, + char **backing_file_out, time_t *mtime_out, + unsigned long long *size_out, int *sectorsize_out, + __u32 *align_out, int *bitmap_offset_out); + +extern int write_cow_header(char *cow_file, int fd, char *backing_file, + int sectorsize, int alignment, + unsigned long long *size); + +extern void cow_sizes(int version, __u64 size, int sectorsize, int align, + int bitmap_offset, unsigned long *bitmap_len_out, + int *data_offset_out); + +#endif + +/* + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h new file mode 100644 index 000000000000..c83fc5d68936 --- /dev/null +++ b/arch/um/drivers/cow_sys.h @@ -0,0 +1,48 @@ +#ifndef __COW_SYS_H__ +#define __COW_SYS_H__ + +#include "kern_util.h" +#include "user_util.h" +#include "os.h" +#include "user.h" + +static inline void *cow_malloc(int size) +{ + return(um_kmalloc(size)); +} + +static inline void cow_free(void *ptr) +{ + kfree(ptr); +} + +#define cow_printf printk + +static inline char *cow_strdup(char *str) +{ + return(uml_strdup(str)); +} + +static inline int cow_seek_file(int fd, unsigned long long offset) +{ + return(os_seek_file(fd, offset)); +} + +static inline int cow_file_size(char *file, unsigned long long *size_out) +{ + return(os_file_size(file, size_out)); +} + +static inline int cow_write_file(int fd, char *buf, int size) +{ + return(os_write_file(fd, buf, size)); +} + +#endif + +/* + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c new file mode 100644 index 000000000000..a8ce6fc3ef26 --- /dev/null +++ b/arch/um/drivers/cow_user.c @@ -0,0 +1,378 @@ +#include +#include +#include +/* _XOPEN_SOURCE is needed for pread, but we define _GNU_SOURCE, which defines + * that. + */ +#include +#include +#include +#include +#include +#include + +#include "os.h" + +#include "cow.h" +#include "cow_sys.h" + +#define PATH_LEN_V1 256 + +struct cow_header_v1 { + int magic; + int version; + char backing_file[PATH_LEN_V1]; + time_t mtime; + __u64 size; + int sectorsize; +}; + +#define PATH_LEN_V2 MAXPATHLEN + +struct cow_header_v2 { + __u32 magic; + __u32 version; + char backing_file[PATH_LEN_V2]; + time_t mtime; + __u64 size; + int sectorsize; +}; + +/* Define PATH_LEN_V3 as the usual value of MAXPATHLEN, just hard-code it in + * case other systems have different values for MAXPATHLEN + */ +#define PATH_LEN_V3 4096 + +/* Changes from V2 - + * PATH_LEN_V3 as described above + * Explicitly specify field bit lengths for systems with different + * lengths for the usual C types. Not sure whether char or + * time_t should be changed, this can be changed later without + * breaking compatibility + * Add alignment field so that different alignments can be used for the + * bitmap and data + * Add cow_format field to allow for the possibility of different ways + * of specifying the COW blocks. For now, the only value is 0, + * for the traditional COW bitmap. + * Move the backing_file field to the end of the header. This allows + * for the possibility of expanding it into the padding required + * by the bitmap alignment. + * The bitmap and data portions of the file will be aligned as specified + * by the alignment field. This is to allow COW files to be + * put on devices with restrictions on access alignments, such as + * /dev/raw, with a 512 byte alignment restriction. This also + * allows the data to be more aligned more strictly than on + * sector boundaries. This is needed for ubd-mmap, which needs + * the data to be page aligned. + * Fixed (finally!) the rounding bug + */ + +struct cow_header_v3 { + __u32 magic; + __u32 version; + __u32 mtime; + __u64 size; + __u32 sectorsize; + __u32 alignment; + __u32 cow_format; + char backing_file[PATH_LEN_V3]; +}; + +/* COW format definitions - for now, we have only the usual COW bitmap */ +#define COW_BITMAP 0 + +union cow_header { + struct cow_header_v1 v1; + struct cow_header_v2 v2; + struct cow_header_v3 v3; +}; + +#define COW_MAGIC 0x4f4f4f4d /* MOOO */ +#define COW_VERSION 3 + +#define DIV_ROUND(x, len) (((x) + (len) - 1) / (len)) +#define ROUND_UP(x, align) DIV_ROUND(x, align) * (align) + +void cow_sizes(int version, __u64 size, int sectorsize, int align, + int bitmap_offset, unsigned long *bitmap_len_out, + int *data_offset_out) +{ + if(version < 3){ + *bitmap_len_out = (size + sectorsize - 1) / (8 * sectorsize); + + *data_offset_out = bitmap_offset + *bitmap_len_out; + *data_offset_out = (*data_offset_out + sectorsize - 1) / + sectorsize; + *data_offset_out *= sectorsize; + } + else { + *bitmap_len_out = DIV_ROUND(size, sectorsize); + *bitmap_len_out = DIV_ROUND(*bitmap_len_out, 8); + + *data_offset_out = bitmap_offset + *bitmap_len_out; + *data_offset_out = ROUND_UP(*data_offset_out, align); + } +} + +static int absolutize(char *to, int size, char *from) +{ + char save_cwd[256], *slash; + int remaining; + + if(getcwd(save_cwd, sizeof(save_cwd)) == NULL) { + cow_printf("absolutize : unable to get cwd - errno = %d\n", + errno); + return(-1); + } + slash = strrchr(from, '/'); + if(slash != NULL){ + *slash = '\0'; + if(chdir(from)){ + *slash = '/'; + cow_printf("absolutize : Can't cd to '%s' - " + "errno = %d\n", from, errno); + return(-1); + } + *slash = '/'; + if(getcwd(to, size) == NULL){ + cow_printf("absolutize : unable to get cwd of '%s' - " + "errno = %d\n", from, errno); + return(-1); + } + remaining = size - strlen(to); + if(strlen(slash) + 1 > remaining){ + cow_printf("absolutize : unable to fit '%s' into %d " + "chars\n", from, size); + return(-1); + } + strcat(to, slash); + } + else { + if(strlen(save_cwd) + 1 + strlen(from) + 1 > size){ + cow_printf("absolutize : unable to fit '%s' into %d " + "chars\n", from, size); + return(-1); + } + strcpy(to, save_cwd); + strcat(to, "/"); + strcat(to, from); + } + chdir(save_cwd); + return(0); +} + +int write_cow_header(char *cow_file, int fd, char *backing_file, + int sectorsize, int alignment, unsigned long long *size) +{ + struct cow_header_v3 *header; + unsigned long modtime; + int err; + + err = cow_seek_file(fd, 0); + if(err < 0){ + cow_printf("write_cow_header - lseek failed, err = %d\n", -err); + goto out; + } + + err = -ENOMEM; + header = cow_malloc(sizeof(*header)); + if(header == NULL){ + cow_printf("Failed to allocate COW V3 header\n"); + goto out; + } + header->magic = htonl(COW_MAGIC); + header->version = htonl(COW_VERSION); + + err = -EINVAL; + if(strlen(backing_file) > sizeof(header->backing_file) - 1){ + cow_printf("Backing file name \"%s\" is too long - names are " + "limited to %d characters\n", backing_file, + sizeof(header->backing_file) - 1); + goto out_free; + } + + if(absolutize(header->backing_file, sizeof(header->backing_file), + backing_file)) + goto out_free; + + err = os_file_modtime(header->backing_file, &modtime); + if(err < 0){ + cow_printf("Backing file '%s' mtime request failed, " + "err = %d\n", header->backing_file, -err); + goto out_free; + } + + err = cow_file_size(header->backing_file, size); + if(err < 0){ + cow_printf("Couldn't get size of backing file '%s', " + "err = %d\n", header->backing_file, -err); + goto out_free; + } + + header->mtime = htonl(modtime); + header->size = htonll(*size); + header->sectorsize = htonl(sectorsize); + header->alignment = htonl(alignment); + header->cow_format = COW_BITMAP; + + err = os_write_file(fd, header, sizeof(*header)); + if(err != sizeof(*header)){ + cow_printf("Write of header to new COW file '%s' failed, " + "err = %d\n", cow_file, -err); + goto out_free; + } + err = 0; + out_free: + cow_free(header); + out: + return(err); +} + +int file_reader(__u64 offset, char *buf, int len, void *arg) +{ + int fd = *((int *) arg); + + return(pread(fd, buf, len, offset)); +} + +/* XXX Need to sanity-check the values read from the header */ + +int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, + __u32 *version_out, char **backing_file_out, + time_t *mtime_out, unsigned long long *size_out, + int *sectorsize_out, __u32 *align_out, + int *bitmap_offset_out) +{ + union cow_header *header; + char *file; + int err, n; + unsigned long version, magic; + + header = cow_malloc(sizeof(*header)); + if(header == NULL){ + cow_printf("read_cow_header - Failed to allocate header\n"); + return(-ENOMEM); + } + err = -EINVAL; + n = (*reader)(0, (char *) header, sizeof(*header), arg); + if(n < offsetof(typeof(header->v1), backing_file)){ + cow_printf("read_cow_header - short header\n"); + goto out; + } + + magic = header->v1.magic; + if(magic == COW_MAGIC) { + version = header->v1.version; + } + else if(magic == ntohl(COW_MAGIC)){ + version = ntohl(header->v1.version); + } + /* No error printed because the non-COW case comes through here */ + else goto out; + + *version_out = version; + + if(version == 1){ + if(n < sizeof(header->v1)){ + cow_printf("read_cow_header - failed to read V1 " + "header\n"); + goto out; + } + *mtime_out = header->v1.mtime; + *size_out = header->v1.size; + *sectorsize_out = header->v1.sectorsize; + *bitmap_offset_out = sizeof(header->v1); + *align_out = *sectorsize_out; + file = header->v1.backing_file; + } + else if(version == 2){ + if(n < sizeof(header->v2)){ + cow_printf("read_cow_header - failed to read V2 " + "header\n"); + goto out; + } + *mtime_out = ntohl(header->v2.mtime); + *size_out = ntohll(header->v2.size); + *sectorsize_out = ntohl(header->v2.sectorsize); + *bitmap_offset_out = sizeof(header->v2); + *align_out = *sectorsize_out; + file = header->v2.backing_file; + } + else if(version == 3){ + if(n < sizeof(header->v3)){ + cow_printf("read_cow_header - failed to read V2 " + "header\n"); + goto out; + } + *mtime_out = ntohl(header->v3.mtime); + *size_out = ntohll(header->v3.size); + *sectorsize_out = ntohl(header->v3.sectorsize); + *align_out = ntohl(header->v3.alignment); + *bitmap_offset_out = ROUND_UP(sizeof(header->v3), *align_out); + file = header->v3.backing_file; + } + else { + cow_printf("read_cow_header - invalid COW version\n"); + goto out; + } + err = -ENOMEM; + *backing_file_out = cow_strdup(file); + if(*backing_file_out == NULL){ + cow_printf("read_cow_header - failed to allocate backing " + "file\n"); + goto out; + } + err = 0; + out: + cow_free(header); + return(err); +} + +int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, + int alignment, int *bitmap_offset_out, + unsigned long *bitmap_len_out, int *data_offset_out) +{ + unsigned long long size, offset; + char zero = 0; + int err; + + err = write_cow_header(cow_file, fd, backing_file, sectorsize, + alignment, &size); + if(err) + goto out; + + *bitmap_offset_out = ROUND_UP(sizeof(struct cow_header_v3), alignment); + cow_sizes(COW_VERSION, size, sectorsize, alignment, *bitmap_offset_out, + bitmap_len_out, data_offset_out); + + offset = *data_offset_out + size - sizeof(zero); + err = cow_seek_file(fd, offset); + if(err < 0){ + cow_printf("cow bitmap lseek failed : err = %d\n", -err); + goto out; + } + + /* does not really matter how much we write it is just to set EOF + * this also sets the entire COW bitmap + * to zero without having to allocate it + */ + err = cow_write_file(fd, &zero, sizeof(zero)); + if(err != sizeof(zero)){ + cow_printf("Write of bitmap to new COW file '%s' failed, " + "err = %d\n", cow_file, -err); + err = -EINVAL; + goto out; + } + + return(0); + + out: + return(err); +} + +/* + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/daemon.h b/arch/um/drivers/daemon.h new file mode 100644 index 000000000000..7326c42f7ef9 --- /dev/null +++ b/arch/um/drivers/daemon.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "net_user.h" + +#define SWITCH_VERSION 3 + +struct daemon_data { + char *sock_type; + char *ctl_sock; + void *ctl_addr; + void *data_addr; + void *local_addr; + int fd; + int control; + void *dev; +}; + +extern struct net_user_info daemon_user_info; + +extern int daemon_user_write(int fd, void *buf, int len, + struct daemon_data *pri); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/daemon_kern.c b/arch/um/drivers/daemon_kern.c new file mode 100644 index 000000000000..30d285b266af --- /dev/null +++ b/arch/um/drivers/daemon_kern.c @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * Licensed under the GPL. + */ + +#include "linux/kernel.h" +#include "linux/init.h" +#include "linux/netdevice.h" +#include "linux/etherdevice.h" +#include "net_kern.h" +#include "net_user.h" +#include "daemon.h" + +struct daemon_init { + char *sock_type; + char *ctl_sock; +}; + +void daemon_init(struct net_device *dev, void *data) +{ + struct uml_net_private *pri; + struct daemon_data *dpri; + struct daemon_init *init = data; + + pri = dev->priv; + dpri = (struct daemon_data *) pri->user; + dpri->sock_type = init->sock_type; + dpri->ctl_sock = init->ctl_sock; + dpri->fd = -1; + dpri->control = -1; + dpri->dev = dev; + + printk("daemon backend (uml_switch version %d) - %s:%s", + SWITCH_VERSION, dpri->sock_type, dpri->ctl_sock); + printk("\n"); +} + +static int daemon_read(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER); + if(*skb == NULL) return(-ENOMEM); + return(net_recvfrom(fd, (*skb)->mac.raw, + (*skb)->dev->mtu + ETH_HEADER_OTHER)); +} + +static int daemon_write(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return(daemon_user_write(fd, (*skb)->data, (*skb)->len, + (struct daemon_data *) &lp->user)); +} + +static struct net_kern_info daemon_kern_info = { + .init = daemon_init, + .protocol = eth_protocol, + .read = daemon_read, + .write = daemon_write, +}; + +int daemon_setup(char *str, char **mac_out, void *data) +{ + struct daemon_init *init = data; + char *remain; + + *init = ((struct daemon_init) + { .sock_type = "unix", + .ctl_sock = "/tmp/uml.ctl" }); + + remain = split_if_spec(str, mac_out, &init->sock_type, &init->ctl_sock, + NULL); + if(remain != NULL) + printk(KERN_WARNING "daemon_setup : Ignoring data socket " + "specification\n"); + + return(1); +} + +static struct transport daemon_transport = { + .list = LIST_HEAD_INIT(daemon_transport.list), + .name = "daemon", + .setup = daemon_setup, + .user = &daemon_user_info, + .kern = &daemon_kern_info, + .private_size = sizeof(struct daemon_data), + .setup_size = sizeof(struct daemon_init), +}; + +static int register_daemon(void) +{ + register_transport(&daemon_transport); + return(1); +} + +__initcall(register_daemon); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c new file mode 100644 index 000000000000..cf15b4a8b517 --- /dev/null +++ b/arch/um/drivers/daemon_user.c @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * Licensed under the GPL. + */ + +#include +#include +#include +#include +#include +#include +#include "net_user.h" +#include "daemon.h" +#include "kern_util.h" +#include "user_util.h" +#include "user.h" +#include "os.h" + +#define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) + +enum request_type { REQ_NEW_CONTROL }; + +#define SWITCH_MAGIC 0xfeedface + +struct request_v3 { + uint32_t magic; + uint32_t version; + enum request_type type; + struct sockaddr_un sock; +}; + +static struct sockaddr_un *new_addr(void *name, int len) +{ + struct sockaddr_un *sun; + + sun = um_kmalloc(sizeof(struct sockaddr_un)); + if(sun == NULL){ + printk("new_addr: allocation of sockaddr_un failed\n"); + return(NULL); + } + sun->sun_family = AF_UNIX; + memcpy(sun->sun_path, name, len); + return(sun); +} + +static int connect_to_switch(struct daemon_data *pri) +{ + struct sockaddr_un *ctl_addr = pri->ctl_addr; + struct sockaddr_un *local_addr = pri->local_addr; + struct sockaddr_un *sun; + struct request_v3 req; + int fd, n, err; + + pri->control = socket(AF_UNIX, SOCK_STREAM, 0); + if(pri->control < 0){ + printk("daemon_open : control socket failed, errno = %d\n", + errno); + return(-errno); + } + + if(connect(pri->control, (struct sockaddr *) ctl_addr, + sizeof(*ctl_addr)) < 0){ + printk("daemon_open : control connect failed, errno = %d\n", + errno); + err = -errno; + goto out; + } + + fd = socket(AF_UNIX, SOCK_DGRAM, 0); + if(fd < 0){ + printk("daemon_open : data socket failed, errno = %d\n", + errno); + err = -errno; + goto out; + } + if(bind(fd, (struct sockaddr *) local_addr, sizeof(*local_addr)) < 0){ + printk("daemon_open : data bind failed, errno = %d\n", + errno); + err = -errno; + goto out_close; + } + + sun = um_kmalloc(sizeof(struct sockaddr_un)); + if(sun == NULL){ + printk("new_addr: allocation of sockaddr_un failed\n"); + err = -ENOMEM; + goto out_close; + } + + req.magic = SWITCH_MAGIC; + req.version = SWITCH_VERSION; + req.type = REQ_NEW_CONTROL; + req.sock = *local_addr; + n = os_write_file(pri->control, &req, sizeof(req)); + if(n != sizeof(req)){ + printk("daemon_open : control setup request failed, err = %d\n", + -n); + err = -ENOTCONN; + goto out; + } + + n = os_read_file(pri->control, sun, sizeof(*sun)); + if(n != sizeof(*sun)){ + printk("daemon_open : read of data socket failed, err = %d\n", + -n); + err = -ENOTCONN; + goto out_close; + } + + pri->data_addr = sun; + return(fd); + + out_close: + os_close_file(fd); + out: + os_close_file(pri->control); + return(err); +} + +static void daemon_user_init(void *data, void *dev) +{ + struct daemon_data *pri = data; + struct timeval tv; + struct { + char zero; + int pid; + int usecs; + } name; + + if(!strcmp(pri->sock_type, "unix")) + pri->ctl_addr = new_addr(pri->ctl_sock, + strlen(pri->ctl_sock) + 1); + name.zero = 0; + name.pid = os_getpid(); + gettimeofday(&tv, NULL); + name.usecs = tv.tv_usec; + pri->local_addr = new_addr(&name, sizeof(name)); + pri->dev = dev; + pri->fd = connect_to_switch(pri); + if(pri->fd < 0){ + kfree(pri->local_addr); + pri->local_addr = NULL; + } +} + +static int daemon_open(void *data) +{ + struct daemon_data *pri = data; + return(pri->fd); +} + +static void daemon_remove(void *data) +{ + struct daemon_data *pri = data; + + os_close_file(pri->fd); + os_close_file(pri->control); + if(pri->data_addr != NULL) kfree(pri->data_addr); + if(pri->ctl_addr != NULL) kfree(pri->ctl_addr); + if(pri->local_addr != NULL) kfree(pri->local_addr); +} + +int daemon_user_write(int fd, void *buf, int len, struct daemon_data *pri) +{ + struct sockaddr_un *data_addr = pri->data_addr; + + return(net_sendto(fd, buf, len, data_addr, sizeof(*data_addr))); +} + +static int daemon_set_mtu(int mtu, void *data) +{ + return(mtu); +} + +struct net_user_info daemon_user_info = { + .init = daemon_user_init, + .open = daemon_open, + .close = NULL, + .remove = daemon_remove, + .set_mtu = daemon_set_mtu, + .add_address = NULL, + .delete_address = NULL, + .max_packet = MAX_PACKET - ETH_HEADER_OTHER +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c new file mode 100644 index 000000000000..f0b888f66e05 --- /dev/null +++ b/arch/um/drivers/fd.c @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include "user.h" +#include "user_util.h" +#include "chan_user.h" + +struct fd_chan { + int fd; + int raw; + struct termios tt; + char str[sizeof("1234567890\0")]; +}; + +static void *fd_init(char *str, int device, struct chan_opts *opts) +{ + struct fd_chan *data; + char *end; + int n; + + if(*str != ':'){ + printk("fd_init : channel type 'fd' must specify a file " + "descriptor\n"); + return(NULL); + } + str++; + n = strtoul(str, &end, 0); + if((*end != '\0') || (end == str)){ + printk("fd_init : couldn't parse file descriptor '%s'\n", str); + return(NULL); + } + data = um_kmalloc(sizeof(*data)); + if(data == NULL) return(NULL); + *data = ((struct fd_chan) { .fd = n, + .raw = opts->raw }); + return(data); +} + +static int fd_open(int input, int output, int primary, void *d, char **dev_out) +{ + struct fd_chan *data = d; + int err; + + if(data->raw && isatty(data->fd)){ + CATCH_EINTR(err = tcgetattr(data->fd, &data->tt)); + if(err) + return(err); + + err = raw(data->fd); + if(err) + return(err); + } + sprintf(data->str, "%d", data->fd); + *dev_out = data->str; + return(data->fd); +} + +static void fd_close(int fd, void *d) +{ + struct fd_chan *data = d; + int err; + + if(data->raw && isatty(fd)){ + CATCH_EINTR(err = tcsetattr(fd, TCSAFLUSH, &data->tt)); + if(err) + printk("Failed to restore terminal state - " + "errno = %d\n", -err); + data->raw = 0; + } +} + +static int fd_console_write(int fd, const char *buf, int n, void *d) +{ + struct fd_chan *data = d; + + return(generic_console_write(fd, buf, n, &data->tt)); +} + +struct chan_ops fd_ops = { + .type = "fd", + .init = fd_init, + .open = fd_open, + .close = fd_close, + .read = generic_read, + .write = generic_write, + .console_write = fd_console_write, + .window_size = generic_window_size, + .free = generic_free, + .winch = 1, +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/harddog_kern.c b/arch/um/drivers/harddog_kern.c new file mode 100644 index 000000000000..147ec19f6bb9 --- /dev/null +++ b/arch/um/drivers/harddog_kern.c @@ -0,0 +1,190 @@ +/* UML hardware watchdog, shamelessly stolen from: + * + * SoftDog 0.05: A Software Watchdog Device + * + * (c) Copyright 1996 Alan Cox , All Rights Reserved. + * http://www.redhat.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + * + * (c) Copyright 1995 Alan Cox + * + * Software only watchdog driver. Unlike its big brother the WDT501P + * driver this won't always recover a failed machine. + * + * 03/96: Angelo Haritsis : + * Modularised. + * Added soft_margin; use upon insmod to change the timer delay. + * NB: uses same minor as wdt (WATCHDOG_MINOR); we could use separate + * minors. + * + * 19980911 Alan Cox + * Made SMP safe for 2.3.x + * + * 20011127 Joel Becker (jlbec@evilplan.org> + * Added soft_noboot; Allows testing the softdog trigger without + * requiring a recompile. + * Added WDIOC_GETTIMEOUT and WDIOC_SETTIMOUT. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "helper.h" +#include "mconsole.h" + +MODULE_LICENSE("GPL"); + +/* Locked by the BKL in harddog_open and harddog_release */ +static int timer_alive; +static int harddog_in_fd = -1; +static int harddog_out_fd = -1; + +/* + * Allow only one person to hold it open + */ + +extern int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock); + +static int harddog_open(struct inode *inode, struct file *file) +{ + int err; + char *sock = NULL; + + lock_kernel(); + if(timer_alive) + return -EBUSY; +#ifdef CONFIG_HARDDOG_NOWAYOUT + __module_get(THIS_MODULE); +#endif + +#ifdef CONFIG_MCONSOLE + sock = mconsole_notify_socket(); +#endif + err = start_watchdog(&harddog_in_fd, &harddog_out_fd, sock); + if(err) return(err); + + timer_alive = 1; + unlock_kernel(); + return nonseekable_open(inode, file); +} + +extern void stop_watchdog(int in_fd, int out_fd); + +static int harddog_release(struct inode *inode, struct file *file) +{ + /* + * Shut off the timer. + */ + lock_kernel(); + + stop_watchdog(harddog_in_fd, harddog_out_fd); + harddog_in_fd = -1; + harddog_out_fd = -1; + + timer_alive=0; + unlock_kernel(); + return 0; +} + +extern int ping_watchdog(int fd); + +static ssize_t harddog_write(struct file *file, const char *data, size_t len, + loff_t *ppos) +{ + /* + * Refresh the timer. + */ + if(len) + return(ping_watchdog(harddog_out_fd)); + return 0; +} + +static int harddog_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + static struct watchdog_info ident = { + WDIOC_SETTIMEOUT, + 0, + "UML Hardware Watchdog" + }; + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + if(copy_to_user((struct harddog_info *)arg, &ident, + sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0,(int *)arg); + case WDIOC_KEEPALIVE: + return(ping_watchdog(harddog_out_fd)); + } +} + +static struct file_operations harddog_fops = { + .owner = THIS_MODULE, + .write = harddog_write, + .ioctl = harddog_ioctl, + .open = harddog_open, + .release = harddog_release, +}; + +static struct miscdevice harddog_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &harddog_fops, +}; + +static char banner[] __initdata = KERN_INFO "UML Watchdog Timer\n"; + +static int __init harddog_init(void) +{ + int ret; + + ret = misc_register(&harddog_miscdev); + + if (ret) + return ret; + + printk(banner); + + return(0); +} + +static void __exit harddog_exit(void) +{ + misc_deregister(&harddog_miscdev); +} + +module_init(harddog_init); +module_exit(harddog_exit); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/harddog_user.c b/arch/um/drivers/harddog_user.c new file mode 100644 index 000000000000..d934181b8d4c --- /dev/null +++ b/arch/um/drivers/harddog_user.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include "user_util.h" +#include "user.h" +#include "helper.h" +#include "mconsole.h" +#include "os.h" +#include "choose-mode.h" +#include "mode.h" + +struct dog_data { + int stdin; + int stdout; + int close_me[2]; +}; + +static void pre_exec(void *d) +{ + struct dog_data *data = d; + + dup2(data->stdin, 0); + dup2(data->stdout, 1); + dup2(data->stdout, 2); + os_close_file(data->stdin); + os_close_file(data->stdout); + os_close_file(data->close_me[0]); + os_close_file(data->close_me[1]); +} + +int start_watchdog(int *in_fd_ret, int *out_fd_ret, char *sock) +{ + struct dog_data data; + int in_fds[2], out_fds[2], pid, n, err; + char pid_buf[sizeof("nnnnn\0")], c; + char *pid_args[] = { "/usr/bin/uml_watchdog", "-pid", pid_buf, NULL }; + char *mconsole_args[] = { "/usr/bin/uml_watchdog", "-mconsole", NULL, + NULL }; + char **args = NULL; + + err = os_pipe(in_fds, 1, 0); + if(err < 0){ + printk("harddog_open - os_pipe failed, err = %d\n", -err); + goto out; + } + + err = os_pipe(out_fds, 1, 0); + if(err < 0){ + printk("harddog_open - os_pipe failed, err = %d\n", -err); + goto out_close_in; + } + + data.stdin = out_fds[0]; + data.stdout = in_fds[1]; + data.close_me[0] = out_fds[1]; + data.close_me[1] = in_fds[0]; + + if(sock != NULL){ + mconsole_args[2] = sock; + args = mconsole_args; + } + else { + /* XXX The os_getpid() is not SMP correct */ + sprintf(pid_buf, "%d", CHOOSE_MODE(tracing_pid, os_getpid())); + args = pid_args; + } + + pid = run_helper(pre_exec, &data, args, NULL); + + os_close_file(out_fds[0]); + os_close_file(in_fds[1]); + + if(pid < 0){ + err = -pid; + printk("harddog_open - run_helper failed, errno = %d\n", -err); + goto out_close_out; + } + + n = os_read_file(in_fds[0], &c, sizeof(c)); + if(n == 0){ + printk("harddog_open - EOF on watchdog pipe\n"); + helper_wait(pid); + err = -EIO; + goto out_close_out; + } + else if(n < 0){ + printk("harddog_open - read of watchdog pipe failed, " + "err = %d\n", -n); + helper_wait(pid); + err = n; + goto out_close_out; + } + *in_fd_ret = in_fds[0]; + *out_fd_ret = out_fds[1]; + return(0); + + out_close_in: + os_close_file(in_fds[0]); + os_close_file(in_fds[1]); + out_close_out: + os_close_file(out_fds[0]); + os_close_file(out_fds[1]); + out: + return(err); +} + +void stop_watchdog(int in_fd, int out_fd) +{ + os_close_file(in_fd); + os_close_file(out_fd); +} + +int ping_watchdog(int fd) +{ + int n; + char c = '\n'; + + n = os_write_file(fd, &c, sizeof(c)); + if(n != sizeof(c)){ + printk("ping_watchdog - write failed, err = %d\n", -n); + if(n < 0) + return(n); + return(-EIO); + } + return 1; + +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c new file mode 100644 index 000000000000..d5742783e19d --- /dev/null +++ b/arch/um/drivers/hostaudio_kern.c @@ -0,0 +1,352 @@ +/* + * Copyright (C) 2002 Steve Schmidtke + * Licensed under the GPL + */ + +#include "linux/config.h" +#include "linux/module.h" +#include "linux/init.h" +#include "linux/slab.h" +#include "linux/fs.h" +#include "linux/sound.h" +#include "linux/soundcard.h" +#include "asm/uaccess.h" +#include "kern_util.h" +#include "init.h" +#include "os.h" + +struct hostaudio_state { + int fd; +}; + +struct hostmixer_state { + int fd; +}; + +#define HOSTAUDIO_DEV_DSP "/dev/sound/dsp" +#define HOSTAUDIO_DEV_MIXER "/dev/sound/mixer" + +/* Only changed from linux_main at boot time */ +char *dsp = HOSTAUDIO_DEV_DSP; +char *mixer = HOSTAUDIO_DEV_MIXER; + +#define DSP_HELP \ +" This is used to specify the host dsp device to the hostaudio driver.\n" \ +" The default is \"" HOSTAUDIO_DEV_DSP "\".\n\n" + +#define MIXER_HELP \ +" This is used to specify the host mixer device to the hostaudio driver.\n"\ +" The default is \"" HOSTAUDIO_DEV_MIXER "\".\n\n" + +#ifndef MODULE +static int set_dsp(char *name, int *add) +{ + dsp = name; + return(0); +} + +__uml_setup("dsp=", set_dsp, "dsp=\n" DSP_HELP); + +static int set_mixer(char *name, int *add) +{ + mixer = name; + return(0); +} + +__uml_setup("mixer=", set_mixer, "mixer=\n" MIXER_HELP); + +#else /*MODULE*/ + +MODULE_PARM(dsp, "s"); +MODULE_PARM_DESC(dsp, DSP_HELP); + +MODULE_PARM(mixer, "s"); +MODULE_PARM_DESC(mixer, MIXER_HELP); + +#endif + +/* /dev/dsp file operations */ + +static ssize_t hostaudio_read(struct file *file, char *buffer, size_t count, + loff_t *ppos) +{ + struct hostaudio_state *state = file->private_data; + void *kbuf; + int err; + +#ifdef DEBUG + printk("hostaudio: read called, count = %d\n", count); +#endif + + kbuf = kmalloc(count, GFP_KERNEL); + if(kbuf == NULL) + return(-ENOMEM); + + err = os_read_file(state->fd, kbuf, count); + if(err < 0) + goto out; + + if(copy_to_user(buffer, kbuf, err)) + err = -EFAULT; + + out: + kfree(kbuf); + return(err); +} + +static ssize_t hostaudio_write(struct file *file, const char *buffer, + size_t count, loff_t *ppos) +{ + struct hostaudio_state *state = file->private_data; + void *kbuf; + int err; + +#ifdef DEBUG + printk("hostaudio: write called, count = %d\n", count); +#endif + + kbuf = kmalloc(count, GFP_KERNEL); + if(kbuf == NULL) + return(-ENOMEM); + + err = -EFAULT; + if(copy_from_user(kbuf, buffer, count)) + goto out; + + err = os_write_file(state->fd, kbuf, count); + if(err < 0) + goto out; + *ppos += err; + + out: + kfree(kbuf); + return(err); +} + +static unsigned int hostaudio_poll(struct file *file, + struct poll_table_struct *wait) +{ + unsigned int mask = 0; + +#ifdef DEBUG + printk("hostaudio: poll called (unimplemented)\n"); +#endif + + return(mask); +} + +static int hostaudio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct hostaudio_state *state = file->private_data; + unsigned long data = 0; + int err; + +#ifdef DEBUG + printk("hostaudio: ioctl called, cmd = %u\n", cmd); +#endif + switch(cmd){ + case SNDCTL_DSP_SPEED: + case SNDCTL_DSP_STEREO: + case SNDCTL_DSP_GETBLKSIZE: + case SNDCTL_DSP_CHANNELS: + case SNDCTL_DSP_SUBDIVIDE: + case SNDCTL_DSP_SETFRAGMENT: + if(get_user(data, (int *) arg)) + return(-EFAULT); + break; + default: + break; + } + + err = os_ioctl_generic(state->fd, cmd, (unsigned long) &data); + + switch(cmd){ + case SNDCTL_DSP_SPEED: + case SNDCTL_DSP_STEREO: + case SNDCTL_DSP_GETBLKSIZE: + case SNDCTL_DSP_CHANNELS: + case SNDCTL_DSP_SUBDIVIDE: + case SNDCTL_DSP_SETFRAGMENT: + if(put_user(data, (int *) arg)) + return(-EFAULT); + break; + default: + break; + } + + return(err); +} + +static int hostaudio_open(struct inode *inode, struct file *file) +{ + struct hostaudio_state *state; + int r = 0, w = 0; + int ret; + +#ifdef DEBUG + printk("hostaudio: open called (host: %s)\n", dsp); +#endif + + state = kmalloc(sizeof(struct hostaudio_state), GFP_KERNEL); + if(state == NULL) + return(-ENOMEM); + + if(file->f_mode & FMODE_READ) r = 1; + if(file->f_mode & FMODE_WRITE) w = 1; + + ret = os_open_file(dsp, of_set_rw(OPENFLAGS(), r, w), 0); + if(ret < 0){ + kfree(state); + return(ret); + } + + state->fd = ret; + file->private_data = state; + return(0); +} + +static int hostaudio_release(struct inode *inode, struct file *file) +{ + struct hostaudio_state *state = file->private_data; + +#ifdef DEBUG + printk("hostaudio: release called\n"); +#endif + + os_close_file(state->fd); + kfree(state); + + return(0); +} + +/* /dev/mixer file operations */ + +static int hostmixer_ioctl_mixdev(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct hostmixer_state *state = file->private_data; + +#ifdef DEBUG + printk("hostmixer: ioctl called\n"); +#endif + + return(os_ioctl_generic(state->fd, cmd, arg)); +} + +static int hostmixer_open_mixdev(struct inode *inode, struct file *file) +{ + struct hostmixer_state *state; + int r = 0, w = 0; + int ret; + +#ifdef DEBUG + printk("hostmixer: open called (host: %s)\n", mixer); +#endif + + state = kmalloc(sizeof(struct hostmixer_state), GFP_KERNEL); + if(state == NULL) return(-ENOMEM); + + if(file->f_mode & FMODE_READ) r = 1; + if(file->f_mode & FMODE_WRITE) w = 1; + + ret = os_open_file(mixer, of_set_rw(OPENFLAGS(), r, w), 0); + + if(ret < 0){ + printk("hostaudio_open_mixdev failed to open '%s', err = %d\n", + dsp, -ret); + kfree(state); + return(ret); + } + + file->private_data = state; + return(0); +} + +static int hostmixer_release(struct inode *inode, struct file *file) +{ + struct hostmixer_state *state = file->private_data; + +#ifdef DEBUG + printk("hostmixer: release called\n"); +#endif + + os_close_file(state->fd); + kfree(state); + + return(0); +} + + +/* kernel module operations */ + +static struct file_operations hostaudio_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = hostaudio_read, + .write = hostaudio_write, + .poll = hostaudio_poll, + .ioctl = hostaudio_ioctl, + .mmap = NULL, + .open = hostaudio_open, + .release = hostaudio_release, +}; + +static struct file_operations hostmixer_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .ioctl = hostmixer_ioctl_mixdev, + .open = hostmixer_open_mixdev, + .release = hostmixer_release, +}; + +struct { + int dev_audio; + int dev_mixer; +} module_data; + +MODULE_AUTHOR("Steve Schmidtke"); +MODULE_DESCRIPTION("UML Audio Relay"); +MODULE_LICENSE("GPL"); + +static int __init hostaudio_init_module(void) +{ + printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n", + dsp, mixer); + + module_data.dev_audio = register_sound_dsp(&hostaudio_fops, -1); + if(module_data.dev_audio < 0){ + printk(KERN_ERR "hostaudio: couldn't register DSP device!\n"); + return -ENODEV; + } + + module_data.dev_mixer = register_sound_mixer(&hostmixer_fops, -1); + if(module_data.dev_mixer < 0){ + printk(KERN_ERR "hostmixer: couldn't register mixer " + "device!\n"); + unregister_sound_dsp(module_data.dev_audio); + return -ENODEV; + } + + return 0; +} + +static void __exit hostaudio_cleanup_module (void) +{ + unregister_sound_mixer(module_data.dev_mixer); + unregister_sound_dsp(module_data.dev_audio); +} + +module_init(hostaudio_init_module); +module_exit(hostaudio_cleanup_module); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c new file mode 100644 index 000000000000..6924f273ced9 --- /dev/null +++ b/arch/um/drivers/line.c @@ -0,0 +1,681 @@ +/* + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/sched.h" +#include "linux/slab.h" +#include "linux/list.h" +#include "linux/kd.h" +#include "linux/interrupt.h" +#include "linux/devfs_fs_kernel.h" +#include "asm/uaccess.h" +#include "chan_kern.h" +#include "irq_user.h" +#include "line.h" +#include "kern.h" +#include "user_util.h" +#include "kern_util.h" +#include "os.h" +#include "irq_kern.h" + +#define LINE_BUFSIZE 4096 + +static irqreturn_t line_interrupt(int irq, void *data, struct pt_regs *unused) +{ + struct tty_struct *tty = data; + struct line *line = tty->driver_data; + + if (line) + chan_interrupt(&line->chan_list, &line->task, tty, irq); + return IRQ_HANDLED; +} + +static void line_timer_cb(void *arg) +{ + struct tty_struct *tty = arg; + struct line *line = tty->driver_data; + + line_interrupt(line->driver->read_irq, arg, NULL); +} + +static int write_room(struct line *dev) +{ + int n; + + if (dev->buffer == NULL) + return (LINE_BUFSIZE - 1); + + n = dev->head - dev->tail; + if (n <= 0) + n = LINE_BUFSIZE + n; + return (n - 1); +} + +static int buffer_data(struct line *line, const char *buf, int len) +{ + int end, room; + + if(line->buffer == NULL){ + line->buffer = kmalloc(LINE_BUFSIZE, GFP_ATOMIC); + if (line->buffer == NULL) { + printk("buffer_data - atomic allocation failed\n"); + return(0); + } + line->head = line->buffer; + line->tail = line->buffer; + } + + room = write_room(line); + len = (len > room) ? room : len; + + end = line->buffer + LINE_BUFSIZE - line->tail; + if(len < end){ + memcpy(line->tail, buf, len); + line->tail += len; + } + else { + memcpy(line->tail, buf, end); + buf += end; + memcpy(line->buffer, buf, len - end); + line->tail = line->buffer + len - end; + } + + return(len); +} + +static int flush_buffer(struct line *line) +{ + int n, count; + + if ((line->buffer == NULL) || (line->head == line->tail)) + return(1); + + if (line->tail < line->head) { + count = line->buffer + LINE_BUFSIZE - line->head; + n = write_chan(&line->chan_list, line->head, count, + line->driver->write_irq); + if (n < 0) + return(n); + if (n == count) + line->head = line->buffer; + else { + line->head += n; + return(0); + } + } + + count = line->tail - line->head; + n = write_chan(&line->chan_list, line->head, count, + line->driver->write_irq); + if(n < 0) return(n); + + line->head += n; + return(line->head == line->tail); +} + +int line_write(struct tty_struct *tty, const unsigned char *buf, int len) +{ + struct line *line = tty->driver_data; + unsigned long flags; + int n, err, ret = 0; + + if(tty->stopped) return 0; + + down(&line->sem); + if(line->head != line->tail){ + local_irq_save(flags); + ret = buffer_data(line, buf, len); + err = flush_buffer(line); + local_irq_restore(flags); + if(err <= 0 && (err != -EAGAIN || !ret)) + ret = err; + } + else { + n = write_chan(&line->chan_list, buf, len, + line->driver->write_irq); + if(n < 0){ + ret = n; + goto out_up; + } + + len -= n; + ret += n; + if(len > 0) + ret += buffer_data(line, buf + n, len); + } + out_up: + up(&line->sem); + return(ret); +} + +void line_put_char(struct tty_struct *tty, unsigned char ch) +{ + line_write(tty, &ch, sizeof(ch)); +} + +void line_set_termios(struct tty_struct *tty, struct termios * old) +{ + /* nothing */ +} + +int line_chars_in_buffer(struct tty_struct *tty) +{ + return 0; +} + +static struct { + int cmd; + char *level; + char *name; +} tty_ioctls[] = { + /* don't print these, they flood the log ... */ + { TCGETS, NULL, "TCGETS" }, + { TCSETS, NULL, "TCSETS" }, + { TCSETSW, NULL, "TCSETSW" }, + { TCFLSH, NULL, "TCFLSH" }, + { TCSBRK, NULL, "TCSBRK" }, + + /* general tty stuff */ + { TCSETSF, KERN_DEBUG, "TCSETSF" }, + { TCGETA, KERN_DEBUG, "TCGETA" }, + { TIOCMGET, KERN_DEBUG, "TIOCMGET" }, + { TCSBRKP, KERN_DEBUG, "TCSBRKP" }, + { TIOCMSET, KERN_DEBUG, "TIOCMSET" }, + + /* linux-specific ones */ + { TIOCLINUX, KERN_INFO, "TIOCLINUX" }, + { KDGKBMODE, KERN_INFO, "KDGKBMODE" }, + { KDGKBTYPE, KERN_INFO, "KDGKBTYPE" }, + { KDSIGACCEPT, KERN_INFO, "KDSIGACCEPT" }, +}; + +int line_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int ret; + int i; + + ret = 0; + switch(cmd) { +#ifdef TIOCGETP + case TIOCGETP: + case TIOCSETP: + case TIOCSETN: +#endif +#ifdef TIOCGETC + case TIOCGETC: + case TIOCSETC: +#endif +#ifdef TIOCGLTC + case TIOCGLTC: + case TIOCSLTC: +#endif + case TCGETS: + case TCSETSF: + case TCSETSW: + case TCSETS: + case TCGETA: + case TCSETAF: + case TCSETAW: + case TCSETA: + case TCXONC: + case TCFLSH: + case TIOCOUTQ: + case TIOCINQ: + case TIOCGLCKTRMIOS: + case TIOCSLCKTRMIOS: + case TIOCPKT: + case TIOCGSOFTCAR: + case TIOCSSOFTCAR: + return -ENOIOCTLCMD; +#if 0 + case TCwhatever: + /* do something */ + break; +#endif + default: + for (i = 0; i < ARRAY_SIZE(tty_ioctls); i++) + if (cmd == tty_ioctls[i].cmd) + break; + if (i < ARRAY_SIZE(tty_ioctls)) { + if (NULL != tty_ioctls[i].level) + printk("%s%s: %s: ioctl %s called\n", + tty_ioctls[i].level, __FUNCTION__, + tty->name, tty_ioctls[i].name); + } else { + printk(KERN_ERR "%s: %s: unknown ioctl: 0x%x\n", + __FUNCTION__, tty->name, cmd); + } + ret = -ENOIOCTLCMD; + break; + } + return(ret); +} + +static irqreturn_t line_write_interrupt(int irq, void *data, + struct pt_regs *unused) +{ + struct tty_struct *tty = data; + struct line *line = tty->driver_data; + int err; + + err = flush_buffer(line); + if(err == 0) + return(IRQ_NONE); + else if(err < 0){ + line->head = line->buffer; + line->tail = line->buffer; + } + + if(tty == NULL) + return(IRQ_NONE); + + if(test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && + (tty->ldisc.write_wakeup != NULL)) + (tty->ldisc.write_wakeup)(tty); + + /* BLOCKING mode + * In blocking mode, everything sleeps on tty->write_wait. + * Sleeping in the console driver would break non-blocking + * writes. + */ + + if(waitqueue_active(&tty->write_wait)) + wake_up_interruptible(&tty->write_wait); + return(IRQ_HANDLED); +} + +int line_setup_irq(int fd, int input, int output, struct tty_struct *tty) +{ + struct line *line = tty->driver_data; + struct line_driver *driver = line->driver; + int err = 0, flags = SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM; + + if(input) err = um_request_irq(driver->read_irq, fd, IRQ_READ, + line_interrupt, flags, + driver->read_irq_name, tty); + if(err) return(err); + if(output) err = um_request_irq(driver->write_irq, fd, IRQ_WRITE, + line_write_interrupt, flags, + driver->write_irq_name, tty); + line->have_irq = 1; + return(err); +} + +void line_disable(struct tty_struct *tty, int current_irq) +{ + struct line *line = tty->driver_data; + + if(!line->have_irq) + return; + + if(line->driver->read_irq == current_irq) + free_irq_later(line->driver->read_irq, tty); + else { + free_irq_by_irq_and_dev(line->driver->read_irq, tty); + free_irq(line->driver->read_irq, tty); + } + + if(line->driver->write_irq == current_irq) + free_irq_later(line->driver->write_irq, tty); + else { + free_irq_by_irq_and_dev(line->driver->write_irq, tty); + free_irq(line->driver->write_irq, tty); + } + + line->have_irq = 0; +} + +int line_open(struct line *lines, struct tty_struct *tty, + struct chan_opts *opts) +{ + struct line *line; + int err = 0; + + line = &lines[tty->index]; + tty->driver_data = line; + + down(&line->sem); + if (tty->count == 1) { + if (!line->valid) { + err = -ENODEV; + goto out; + } + if (list_empty(&line->chan_list)) { + err = parse_chan_pair(line->init_str, &line->chan_list, + line->init_pri, tty->index, opts); + if(err) goto out; + err = open_chan(&line->chan_list); + if(err) goto out; + } + enable_chan(&line->chan_list, tty); + INIT_WORK(&line->task, line_timer_cb, tty); + } + + if(!line->sigio){ + chan_enable_winch(&line->chan_list, tty); + line->sigio = 1; + } + chan_window_size(&line->chan_list, &tty->winsize.ws_row, + &tty->winsize.ws_col); + line->count++; + +out: + up(&line->sem); + return(err); +} + +void line_close(struct tty_struct *tty, struct file * filp) +{ + struct line *line = tty->driver_data; + + down(&line->sem); + line->count--; + if (tty->count == 1) { + line_disable(tty, -1); + tty->driver_data = NULL; + } + up(&line->sem); +} + +void close_lines(struct line *lines, int nlines) +{ + int i; + + for(i = 0; i < nlines; i++) + close_chan(&lines[i].chan_list); +} + +int line_setup(struct line *lines, int num, char *init, int all_allowed) +{ + int i, n; + char *end; + + if(*init == '=') n = -1; + else { + n = simple_strtoul(init, &end, 0); + if(*end != '='){ + printk(KERN_ERR "line_setup failed to parse \"%s\"\n", + init); + return(0); + } + init = end; + } + init++; + if((n >= 0) && (n >= num)){ + printk("line_setup - %d out of range ((0 ... %d) allowed)\n", + n, num - 1); + return(0); + } + else if (n >= 0){ + if (lines[n].count > 0) { + printk("line_setup - device %d is open\n", n); + return(0); + } + if (lines[n].init_pri <= INIT_ONE){ + lines[n].init_pri = INIT_ONE; + if (!strcmp(init, "none")) + lines[n].valid = 0; + else { + lines[n].init_str = init; + lines[n].valid = 1; + } + } + } + else if(!all_allowed){ + printk("line_setup - can't configure all devices from " + "mconsole\n"); + return(0); + } + else { + for(i = 0; i < num; i++){ + if(lines[i].init_pri <= INIT_ALL){ + lines[i].init_pri = INIT_ALL; + if(!strcmp(init, "none")) lines[i].valid = 0; + else { + lines[i].init_str = init; + lines[i].valid = 1; + } + } + } + } + return(1); +} + +int line_config(struct line *lines, int num, char *str) +{ + char *new = uml_strdup(str); + + if(new == NULL){ + printk("line_config - uml_strdup failed\n"); + return(-ENOMEM); + } + return(!line_setup(lines, num, new, 0)); +} + +int line_get_config(char *name, struct line *lines, int num, char *str, + int size, char **error_out) +{ + struct line *line; + char *end; + int dev, n = 0; + + dev = simple_strtoul(name, &end, 0); + if((*end != '\0') || (end == name)){ + *error_out = "line_get_config failed to parse device number"; + return(0); + } + + if((dev < 0) || (dev >= num)){ + *error_out = "device number of of range"; + return(0); + } + + line = &lines[dev]; + + down(&line->sem); + if(!line->valid) + CONFIG_CHUNK(str, size, n, "none", 1); + else if(line->count == 0) + CONFIG_CHUNK(str, size, n, line->init_str, 1); + else n = chan_config_string(&line->chan_list, str, size, error_out); + up(&line->sem); + + return(n); +} + +int line_remove(struct line *lines, int num, char *str) +{ + char config[sizeof("conxxxx=none\0")]; + + sprintf(config, "%s=none", str); + return(!line_setup(lines, num, config, 0)); +} + +int line_write_room(struct tty_struct *tty) +{ + struct line *dev = tty->driver_data; + int room; + + if (tty->stopped) + return 0; + room = write_room(dev); + if (0 == room) + printk(KERN_DEBUG "%s: %s: no room left in buffer\n", + __FUNCTION__,tty->name); + return room; +} + +struct tty_driver *line_register_devfs(struct lines *set, + struct line_driver *line_driver, + struct tty_operations *ops, struct line *lines, + int nlines) +{ + int i; + struct tty_driver *driver = alloc_tty_driver(nlines); + + if (!driver) + return NULL; + + driver->driver_name = line_driver->name; + driver->name = line_driver->device_name; + driver->devfs_name = line_driver->devfs_name; + driver->major = line_driver->major; + driver->minor_start = line_driver->minor_start; + driver->type = line_driver->type; + driver->subtype = line_driver->subtype; + driver->flags = TTY_DRIVER_REAL_RAW; + driver->init_termios = tty_std_termios; + tty_set_operations(driver, ops); + + if (tty_register_driver(driver)) { + printk("%s: can't register %s driver\n", + __FUNCTION__,line_driver->name); + put_tty_driver(driver); + return NULL; + } + + for(i = 0; i < nlines; i++){ + if(!lines[i].valid) + tty_unregister_device(driver, i); + } + + mconsole_register_dev(&line_driver->mc); + return driver; +} + +void lines_init(struct line *lines, int nlines) +{ + struct line *line; + int i; + + for(i = 0; i < nlines; i++){ + line = &lines[i]; + INIT_LIST_HEAD(&line->chan_list); + sema_init(&line->sem, 1); + if(line->init_str != NULL){ + line->init_str = uml_strdup(line->init_str); + if(line->init_str == NULL) + printk("lines_init - uml_strdup returned " + "NULL\n"); + } + } +} + +struct winch { + struct list_head list; + int fd; + int tty_fd; + int pid; + struct tty_struct *tty; +}; + +irqreturn_t winch_interrupt(int irq, void *data, struct pt_regs *unused) +{ + struct winch *winch = data; + struct tty_struct *tty; + struct line *line; + int err; + char c; + + if(winch->fd != -1){ + err = generic_read(winch->fd, &c, NULL); + if(err < 0){ + if(err != -EAGAIN){ + printk("winch_interrupt : read failed, " + "errno = %d\n", -err); + printk("fd %d is losing SIGWINCH support\n", + winch->tty_fd); + return(IRQ_HANDLED); + } + goto out; + } + } + tty = winch->tty; + if (tty != NULL) { + line = tty->driver_data; + chan_window_size(&line->chan_list, + &tty->winsize.ws_row, + &tty->winsize.ws_col); + kill_pg(tty->pgrp, SIGWINCH, 1); + } + out: + if(winch->fd != -1) + reactivate_fd(winch->fd, WINCH_IRQ); + return(IRQ_HANDLED); +} + +DECLARE_MUTEX(winch_handler_sem); +LIST_HEAD(winch_handlers); + +void register_winch_irq(int fd, int tty_fd, int pid, struct tty_struct *tty) +{ + struct winch *winch; + + down(&winch_handler_sem); + winch = kmalloc(sizeof(*winch), GFP_KERNEL); + if (winch == NULL) { + printk("register_winch_irq - kmalloc failed\n"); + goto out; + } + *winch = ((struct winch) { .list = LIST_HEAD_INIT(winch->list), + .fd = fd, + .tty_fd = tty_fd, + .pid = pid, + .tty = tty }); + list_add(&winch->list, &winch_handlers); + if(um_request_irq(WINCH_IRQ, fd, IRQ_READ, winch_interrupt, + SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, + "winch", winch) < 0) + printk("register_winch_irq - failed to register IRQ\n"); + out: + up(&winch_handler_sem); +} + +static void winch_cleanup(void) +{ + struct list_head *ele; + struct winch *winch; + + list_for_each(ele, &winch_handlers){ + winch = list_entry(ele, struct winch, list); + if(winch->fd != -1){ + deactivate_fd(winch->fd, WINCH_IRQ); + os_close_file(winch->fd); + } + if(winch->pid != -1) + os_kill_process(winch->pid, 1); + } +} +__uml_exitcall(winch_cleanup); + +char *add_xterm_umid(char *base) +{ + char *umid, *title; + int len; + + umid = get_umid(1); + if(umid == NULL) return(base); + + len = strlen(base) + strlen(" ()") + strlen(umid) + 1; + title = kmalloc(len, GFP_KERNEL); + if(title == NULL){ + printk("Failed to allocate buffer for xterm title\n"); + return(base); + } + + snprintf(title, len, "%s (%s)", base, umid); + return(title); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mcast.h b/arch/um/drivers/mcast.h new file mode 100644 index 000000000000..a2c6db243458 --- /dev/null +++ b/arch/um/drivers/mcast.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "net_user.h" + +struct mcast_data { + char *addr; + unsigned short port; + void *mcast_addr; + int ttl; + void *dev; +}; + +extern struct net_user_info mcast_user_info; + +extern int mcast_user_write(int fd, void *buf, int len, + struct mcast_data *pri); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c new file mode 100644 index 000000000000..faf714e87b5b --- /dev/null +++ b/arch/um/drivers/mcast_kern.c @@ -0,0 +1,143 @@ +/* + * user-mode-linux networking multicast transport + * Copyright (C) 2001 by Harald Welte + * + * based on the existing uml-networking code, which is + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * + * Licensed under the GPL. + */ + +#include "linux/kernel.h" +#include "linux/init.h" +#include "linux/netdevice.h" +#include "linux/etherdevice.h" +#include "linux/in.h" +#include "linux/inet.h" +#include "net_kern.h" +#include "net_user.h" +#include "mcast.h" + +struct mcast_init { + char *addr; + int port; + int ttl; +}; + +void mcast_init(struct net_device *dev, void *data) +{ + struct uml_net_private *pri; + struct mcast_data *dpri; + struct mcast_init *init = data; + + pri = dev->priv; + dpri = (struct mcast_data *) pri->user; + dpri->addr = init->addr; + dpri->port = init->port; + dpri->ttl = init->ttl; + dpri->dev = dev; + + printk("mcast backend "); + printk("multicast adddress: %s:%u, TTL:%u ", + dpri->addr, dpri->port, dpri->ttl); + + printk("\n"); +} + +static int mcast_read(int fd, struct sk_buff **skb, struct uml_net_private *lp) +{ + *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER); + if(*skb == NULL) return(-ENOMEM); + return(net_recvfrom(fd, (*skb)->mac.raw, + (*skb)->dev->mtu + ETH_HEADER_OTHER)); +} + +static int mcast_write(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return mcast_user_write(fd, (*skb)->data, (*skb)->len, + (struct mcast_data *) &lp->user); +} + +static struct net_kern_info mcast_kern_info = { + .init = mcast_init, + .protocol = eth_protocol, + .read = mcast_read, + .write = mcast_write, +}; + +int mcast_setup(char *str, char **mac_out, void *data) +{ + struct mcast_init *init = data; + char *port_str = NULL, *ttl_str = NULL, *remain; + char *last; + int n; + + *init = ((struct mcast_init) + { .addr = "239.192.168.1", + .port = 1102, + .ttl = 1 }); + + remain = split_if_spec(str, mac_out, &init->addr, &port_str, &ttl_str, + NULL); + if(remain != NULL){ + printk(KERN_ERR "mcast_setup - Extra garbage on " + "specification : '%s'\n", remain); + return(0); + } + + if(port_str != NULL){ + n = simple_strtoul(port_str, &last, 10); + if((*last != '\0') || (last == port_str)){ + printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", + port_str); + return(0); + } + init->port = htons(n); + } + + if(ttl_str != NULL){ + init->ttl = simple_strtoul(ttl_str, &last, 10); + if((*last != '\0') || (last == ttl_str)){ + printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n", + ttl_str); + return(0); + } + } + + printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr, + init->port, init->ttl); + + return(1); +} + +static struct transport mcast_transport = { + .list = LIST_HEAD_INIT(mcast_transport.list), + .name = "mcast", + .setup = mcast_setup, + .user = &mcast_user_info, + .kern = &mcast_kern_info, + .private_size = sizeof(struct mcast_data), + .setup_size = sizeof(struct mcast_init), +}; + +static int register_mcast(void) +{ + register_transport(&mcast_transport); + return(1); +} + +__initcall(register_mcast); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c new file mode 100644 index 000000000000..0fe1d9fa9139 --- /dev/null +++ b/arch/um/drivers/mcast_user.c @@ -0,0 +1,177 @@ +/* + * user-mode-linux networking multicast transport + * Copyright (C) 2001 by Harald Welte + * + * based on the existing uml-networking code, which is + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * + * Licensed under the GPL. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include "net_user.h" +#include "mcast.h" +#include "kern_util.h" +#include "user_util.h" +#include "user.h" +#include "os.h" + +#define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) + +static struct sockaddr_in *new_addr(char *addr, unsigned short port) +{ + struct sockaddr_in *sin; + + sin = um_kmalloc(sizeof(struct sockaddr_in)); + if(sin == NULL){ + printk("new_addr: allocation of sockaddr_in failed\n"); + return(NULL); + } + sin->sin_family = AF_INET; + sin->sin_addr.s_addr = in_aton(addr); + sin->sin_port = port; + return(sin); +} + +static void mcast_user_init(void *data, void *dev) +{ + struct mcast_data *pri = data; + + pri->mcast_addr = new_addr(pri->addr, pri->port); + pri->dev = dev; +} + +static int mcast_open(void *data) +{ + struct mcast_data *pri = data; + struct sockaddr_in *sin = pri->mcast_addr; + struct ip_mreq mreq; + int fd, yes = 1; + + + if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) { + fd = -EINVAL; + goto out; + } + + fd = socket(AF_INET, SOCK_DGRAM, 0); + if (fd < 0){ + printk("mcast_open : data socket failed, errno = %d\n", + errno); + fd = -ENOMEM; + goto out; + } + + if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { + printk("mcast_open: SO_REUSEADDR failed, errno = %d\n", + errno); + os_close_file(fd); + fd = -EINVAL; + goto out; + } + + /* set ttl according to config */ + if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, + sizeof(pri->ttl)) < 0) { + printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n", + errno); + os_close_file(fd); + fd = -EINVAL; + goto out; + } + + /* set LOOP, so data does get fed back to local sockets */ + if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { + printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n", + errno); + os_close_file(fd); + fd = -EINVAL; + goto out; + } + + /* bind socket to mcast address */ + if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { + printk("mcast_open : data bind failed, errno = %d\n", errno); + os_close_file(fd); + fd = -EINVAL; + goto out; + } + + /* subscribe to the multicast group */ + mreq.imr_multiaddr.s_addr = sin->sin_addr.s_addr; + mreq.imr_interface.s_addr = 0; + if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, + &mreq, sizeof(mreq)) < 0) { + printk("mcast_open: IP_ADD_MEMBERSHIP failed, error = %d\n", + errno); + printk("There appears not to be a multicast-capable network " + "interface on the host.\n"); + printk("eth0 should be configured in order to use the " + "multicast transport.\n"); + os_close_file(fd); + fd = -EINVAL; + } + + out: + return(fd); +} + +static void mcast_close(int fd, void *data) +{ + struct ip_mreq mreq; + struct mcast_data *pri = data; + struct sockaddr_in *sin = pri->mcast_addr; + + mreq.imr_multiaddr.s_addr = sin->sin_addr.s_addr; + mreq.imr_interface.s_addr = 0; + if (setsockopt(fd, SOL_IP, IP_DROP_MEMBERSHIP, + &mreq, sizeof(mreq)) < 0) { + printk("mcast_open: IP_DROP_MEMBERSHIP failed, error = %d\n", + errno); + } + + os_close_file(fd); +} + +int mcast_user_write(int fd, void *buf, int len, struct mcast_data *pri) +{ + struct sockaddr_in *data_addr = pri->mcast_addr; + + return(net_sendto(fd, buf, len, data_addr, sizeof(*data_addr))); +} + +static int mcast_set_mtu(int mtu, void *data) +{ + return(mtu); +} + +struct net_user_info mcast_user_info = { + .init = mcast_user_init, + .open = mcast_open, + .close = mcast_close, + .remove = NULL, + .set_mtu = mcast_set_mtu, + .add_address = NULL, + .delete_address = NULL, + .max_packet = MAX_PACKET - ETH_HEADER_OTHER +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c new file mode 100644 index 000000000000..d7c7adcc0a67 --- /dev/null +++ b/arch/um/drivers/mconsole_kern.c @@ -0,0 +1,619 @@ +/* + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) + * Copyright (C) 2001 - 2003 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include "linux/kernel.h" +#include "linux/slab.h" +#include "linux/init.h" +#include "linux/notifier.h" +#include "linux/reboot.h" +#include "linux/utsname.h" +#include "linux/ctype.h" +#include "linux/interrupt.h" +#include "linux/sysrq.h" +#include "linux/workqueue.h" +#include "linux/module.h" +#include "linux/file.h" +#include "linux/fs.h" +#include "linux/namei.h" +#include "linux/proc_fs.h" +#include "linux/syscalls.h" +#include "asm/irq.h" +#include "asm/uaccess.h" +#include "user_util.h" +#include "kern_util.h" +#include "kern.h" +#include "mconsole.h" +#include "mconsole_kern.h" +#include "irq_user.h" +#include "init.h" +#include "os.h" +#include "umid.h" +#include "irq_kern.h" + +static int do_unlink_socket(struct notifier_block *notifier, + unsigned long what, void *data) +{ + return(mconsole_unlink_socket()); +} + + +static struct notifier_block reboot_notifier = { + .notifier_call = do_unlink_socket, + .priority = 0, +}; + +/* Safe without explicit locking for now. Tasklets provide their own + * locking, and the interrupt handler is safe because it can't interrupt + * itself and it can only happen on CPU 0. + */ + +LIST_HEAD(mc_requests); + +static void mc_work_proc(void *unused) +{ + struct mconsole_entry *req; + unsigned long flags; + + while(!list_empty(&mc_requests)){ + local_save_flags(flags); + req = list_entry(mc_requests.next, struct mconsole_entry, + list); + list_del(&req->list); + local_irq_restore(flags); + req->request.cmd->handler(&req->request); + kfree(req); + } +} + +DECLARE_WORK(mconsole_work, mc_work_proc, NULL); + +static irqreturn_t mconsole_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + /* long to avoid size mismatch warnings from gcc */ + long fd; + struct mconsole_entry *new; + struct mc_request req; + + fd = (long) dev_id; + while (mconsole_get_request(fd, &req)){ + if(req.cmd->context == MCONSOLE_INTR) + (*req.cmd->handler)(&req); + else { + new = kmalloc(sizeof(*new), GFP_ATOMIC); + if(new == NULL) + mconsole_reply(&req, "Out of memory", 1, 0); + else { + new->request = req; + list_add(&new->list, &mc_requests); + } + } + } + if(!list_empty(&mc_requests)) + schedule_work(&mconsole_work); + reactivate_fd(fd, MCONSOLE_IRQ); + return(IRQ_HANDLED); +} + +void mconsole_version(struct mc_request *req) +{ + char version[256]; + + sprintf(version, "%s %s %s %s %s", system_utsname.sysname, + system_utsname.nodename, system_utsname.release, + system_utsname.version, system_utsname.machine); + mconsole_reply(req, version, 0, 0); +} + +void mconsole_log(struct mc_request *req) +{ + int len; + char *ptr = req->request.data; + + ptr += strlen("log "); + + len = req->len - (ptr - req->request.data); + printk("%.*s", len, ptr); + mconsole_reply(req, "", 0, 0); +} + +/* This is a more convoluted version of mconsole_proc, which has some stability + * problems; however, we need it fixed, because it is expected that UML users + * mount HPPFS instead of procfs on /proc. And we want mconsole_proc to still + * show the real procfs content, not the ones from hppfs.*/ +#if 0 +void mconsole_proc(struct mc_request *req) +{ + struct nameidata nd; + struct file_system_type *proc; + struct super_block *super; + struct file *file; + int n, err; + char *ptr = req->request.data, *buf; + + ptr += strlen("proc"); + while(isspace(*ptr)) ptr++; + + proc = get_fs_type("proc"); + if(proc == NULL){ + mconsole_reply(req, "procfs not registered", 1, 0); + goto out; + } + + super = (*proc->get_sb)(proc, 0, NULL, NULL); + put_filesystem(proc); + if(super == NULL){ + mconsole_reply(req, "Failed to get procfs superblock", 1, 0); + goto out; + } + up_write(&super->s_umount); + + nd.dentry = super->s_root; + nd.mnt = NULL; + nd.flags = O_RDONLY + 1; + nd.last_type = LAST_ROOT; + + /* START: it was experienced that the stability problems are closed + * if commenting out these two calls + the below read cycle. To + * make UML crash again, it was enough to readd either one.*/ + err = link_path_walk(ptr, &nd); + if(err){ + mconsole_reply(req, "Failed to look up file", 1, 0); + goto out_kill; + } + + file = dentry_open(nd.dentry, nd.mnt, O_RDONLY); + if(IS_ERR(file)){ + mconsole_reply(req, "Failed to open file", 1, 0); + goto out_kill; + } + /*END*/ + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if(buf == NULL){ + mconsole_reply(req, "Failed to allocate buffer", 1, 0); + goto out_fput; + } + + if((file->f_op != NULL) && (file->f_op->read != NULL)){ + do { + n = (*file->f_op->read)(file, buf, PAGE_SIZE - 1, + &file->f_pos); + if(n >= 0){ + buf[n] = '\0'; + mconsole_reply(req, buf, 0, (n > 0)); + } + else { + mconsole_reply(req, "Read of file failed", + 1, 0); + goto out_free; + } + } while(n > 0); + } + else mconsole_reply(req, "", 0, 0); + + out_free: + kfree(buf); + out_fput: + fput(file); + out_kill: + deactivate_super(super); + out: ; +} +#endif + +void mconsole_proc(struct mc_request *req) +{ + char path[64]; + char *buf; + int len; + int fd; + int first_chunk = 1; + char *ptr = req->request.data; + + ptr += strlen("proc"); + while(isspace(*ptr)) ptr++; + snprintf(path, sizeof(path), "/proc/%s", ptr); + + fd = sys_open(path, 0, 0); + if (fd < 0) { + mconsole_reply(req, "Failed to open file", 1, 0); + printk("open %s: %d\n",path,fd); + goto out; + } + + buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if(buf == NULL){ + mconsole_reply(req, "Failed to allocate buffer", 1, 0); + goto out_close; + } + + for (;;) { + len = sys_read(fd, buf, PAGE_SIZE-1); + if (len < 0) { + mconsole_reply(req, "Read of file failed", 1, 0); + goto out_free; + } + /*Begin the file content on his own line.*/ + if (first_chunk) { + mconsole_reply(req, "\n", 0, 1); + first_chunk = 0; + } + if (len == PAGE_SIZE-1) { + buf[len] = '\0'; + mconsole_reply(req, buf, 0, 1); + } else { + buf[len] = '\0'; + mconsole_reply(req, buf, 0, 0); + break; + } + } + + out_free: + kfree(buf); + out_close: + sys_close(fd); + out: + /* nothing */; +} + +#define UML_MCONSOLE_HELPTEXT \ +"Commands: \n\ + version - Get kernel version \n\ + help - Print this message \n\ + halt - Halt UML \n\ + reboot - Reboot UML \n\ + config = - Add a new device to UML; \n\ + same syntax as command line \n\ + config - Query the configuration of a device \n\ + remove - Remove a device from UML \n\ + sysrq - Performs the SysRq action controlled by the letter \n\ + cad - invoke the Ctl-Alt-Del handler \n\ + stop - pause the UML; it will do nothing until it receives a 'go' \n\ + go - continue the UML after a 'stop' \n\ + log - make UML enter into the kernel log\n\ + proc - returns the contents of the UML's /proc/\n\ +" + +void mconsole_help(struct mc_request *req) +{ + mconsole_reply(req, UML_MCONSOLE_HELPTEXT, 0, 0); +} + +void mconsole_halt(struct mc_request *req) +{ + mconsole_reply(req, "", 0, 0); + machine_halt(); +} + +void mconsole_reboot(struct mc_request *req) +{ + mconsole_reply(req, "", 0, 0); + machine_restart(NULL); +} + +extern void ctrl_alt_del(void); + +void mconsole_cad(struct mc_request *req) +{ + mconsole_reply(req, "", 0, 0); + ctrl_alt_del(); +} + +void mconsole_go(struct mc_request *req) +{ + mconsole_reply(req, "Not stopped", 1, 0); +} + +void mconsole_stop(struct mc_request *req) +{ + deactivate_fd(req->originating_fd, MCONSOLE_IRQ); + os_set_fd_block(req->originating_fd, 1); + mconsole_reply(req, "", 0, 0); + while(mconsole_get_request(req->originating_fd, req)){ + if(req->cmd->handler == mconsole_go) break; + (*req->cmd->handler)(req); + } + os_set_fd_block(req->originating_fd, 0); + reactivate_fd(req->originating_fd, MCONSOLE_IRQ); + mconsole_reply(req, "", 0, 0); +} + +/* This list is populated by __initcall routines. */ + +LIST_HEAD(mconsole_devices); + +void mconsole_register_dev(struct mc_device *new) +{ + list_add(&new->list, &mconsole_devices); +} + +static struct mc_device *mconsole_find_dev(char *name) +{ + struct list_head *ele; + struct mc_device *dev; + + list_for_each(ele, &mconsole_devices){ + dev = list_entry(ele, struct mc_device, list); + if(!strncmp(name, dev->name, strlen(dev->name))) + return(dev); + } + return(NULL); +} + +#define CONFIG_BUF_SIZE 64 + +static void mconsole_get_config(int (*get_config)(char *, char *, int, + char **), + struct mc_request *req, char *name) +{ + char default_buf[CONFIG_BUF_SIZE], *error, *buf; + int n, size; + + if(get_config == NULL){ + mconsole_reply(req, "No get_config routine defined", 1, 0); + return; + } + + error = NULL; + size = sizeof(default_buf)/sizeof(default_buf[0]); + buf = default_buf; + + while(1){ + n = (*get_config)(name, buf, size, &error); + if(error != NULL){ + mconsole_reply(req, error, 1, 0); + goto out; + } + + if(n <= size){ + mconsole_reply(req, buf, 0, 0); + goto out; + } + + if(buf != default_buf) + kfree(buf); + + size = n; + buf = kmalloc(size, GFP_KERNEL); + if(buf == NULL){ + mconsole_reply(req, "Failed to allocate buffer", 1, 0); + return; + } + } + out: + if(buf != default_buf) + kfree(buf); + +} + +void mconsole_config(struct mc_request *req) +{ + struct mc_device *dev; + char *ptr = req->request.data, *name; + int err; + + ptr += strlen("config"); + while(isspace(*ptr)) ptr++; + dev = mconsole_find_dev(ptr); + if(dev == NULL){ + mconsole_reply(req, "Bad configuration option", 1, 0); + return; + } + + name = &ptr[strlen(dev->name)]; + ptr = name; + while((*ptr != '=') && (*ptr != '\0')) + ptr++; + + if(*ptr == '='){ + err = (*dev->config)(name); + mconsole_reply(req, "", err, 0); + } + else mconsole_get_config(dev->get_config, req, name); +} + +void mconsole_remove(struct mc_request *req) +{ + struct mc_device *dev; + char *ptr = req->request.data; + int err; + + ptr += strlen("remove"); + while(isspace(*ptr)) ptr++; + dev = mconsole_find_dev(ptr); + if(dev == NULL){ + mconsole_reply(req, "Bad remove option", 1, 0); + return; + } + err = (*dev->remove)(&ptr[strlen(dev->name)]); + mconsole_reply(req, "", err, 0); +} + +#ifdef CONFIG_MAGIC_SYSRQ +void mconsole_sysrq(struct mc_request *req) +{ + char *ptr = req->request.data; + + ptr += strlen("sysrq"); + while(isspace(*ptr)) ptr++; + + mconsole_reply(req, "", 0, 0); + handle_sysrq(*ptr, ¤t->thread.regs, NULL); +} +#else +void mconsole_sysrq(struct mc_request *req) +{ + mconsole_reply(req, "Sysrq not compiled in", 1, 0); +} +#endif + +/* Changed by mconsole_setup, which is __setup, and called before SMP is + * active. + */ +static char *notify_socket = NULL; + +int mconsole_init(void) +{ + /* long to avoid size mismatch warnings from gcc */ + long sock; + int err; + char file[256]; + + if(umid_file_name("mconsole", file, sizeof(file))) return(-1); + snprintf(mconsole_socket_name, sizeof(file), "%s", file); + + sock = os_create_unix_socket(file, sizeof(file), 1); + if (sock < 0){ + printk("Failed to initialize management console\n"); + return(1); + } + + register_reboot_notifier(&reboot_notifier); + + err = um_request_irq(MCONSOLE_IRQ, sock, IRQ_READ, mconsole_interrupt, + SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, + "mconsole", (void *)sock); + if (err){ + printk("Failed to get IRQ for management console\n"); + return(1); + } + + if(notify_socket != NULL){ + notify_socket = uml_strdup(notify_socket); + if(notify_socket != NULL) + mconsole_notify(notify_socket, MCONSOLE_SOCKET, + mconsole_socket_name, + strlen(mconsole_socket_name) + 1); + else printk(KERN_ERR "mconsole_setup failed to strdup " + "string\n"); + } + + printk("mconsole (version %d) initialized on %s\n", + MCONSOLE_VERSION, mconsole_socket_name); + return(0); +} + +__initcall(mconsole_init); + +static int write_proc_mconsole(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + char *buf; + + buf = kmalloc(count + 1, GFP_KERNEL); + if(buf == NULL) + return(-ENOMEM); + + if(copy_from_user(buf, buffer, count)){ + count = -EFAULT; + goto out; + } + + buf[count] = '\0'; + + mconsole_notify(notify_socket, MCONSOLE_USER_NOTIFY, buf, count); + out: + kfree(buf); + return(count); +} + +static int create_proc_mconsole(void) +{ + struct proc_dir_entry *ent; + + if(notify_socket == NULL) return(0); + + ent = create_proc_entry("mconsole", S_IFREG | 0200, NULL); + if(ent == NULL){ + printk("create_proc_mconsole : create_proc_entry failed\n"); + return(0); + } + + ent->read_proc = NULL; + ent->write_proc = write_proc_mconsole; + return(0); +} + +static DEFINE_SPINLOCK(notify_spinlock); + +void lock_notify(void) +{ + spin_lock(¬ify_spinlock); +} + +void unlock_notify(void) +{ + spin_unlock(¬ify_spinlock); +} + +__initcall(create_proc_mconsole); + +#define NOTIFY "=notify:" + +static int mconsole_setup(char *str) +{ + if(!strncmp(str, NOTIFY, strlen(NOTIFY))){ + str += strlen(NOTIFY); + notify_socket = str; + } + else printk(KERN_ERR "mconsole_setup : Unknown option - '%s'\n", str); + return(1); +} + +__setup("mconsole", mconsole_setup); + +__uml_help(mconsole_setup, +"mconsole=notify:\n" +" Requests that the mconsole driver send a message to the named Unix\n" +" socket containing the name of the mconsole socket. This also serves\n" +" to notify outside processes when UML has booted far enough to respond\n" +" to mconsole requests.\n\n" +); + +static int notify_panic(struct notifier_block *self, unsigned long unused1, + void *ptr) +{ + char *message = ptr; + + if(notify_socket == NULL) return(0); + + mconsole_notify(notify_socket, MCONSOLE_PANIC, message, + strlen(message) + 1); + return(0); +} + +static struct notifier_block panic_exit_notifier = { + .notifier_call = notify_panic, + .next = NULL, + .priority = 1 +}; + +static int add_notifier(void) +{ + notifier_chain_register(&panic_notifier_list, &panic_exit_notifier); + return(0); +} + +__initcall(add_notifier); + +char *mconsole_notify_socket(void) +{ + return(notify_socket); +} + +EXPORT_SYMBOL(mconsole_notify_socket); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c new file mode 100644 index 000000000000..fe5afb13252c --- /dev/null +++ b/arch/um/drivers/mconsole_user.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) + * Copyright (C) 2001 - 2003 Jeff Dike (jdike@addtoit.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user.h" +#include "mconsole.h" +#include "umid.h" + +static struct mconsole_command commands[] = { + { "version", mconsole_version, MCONSOLE_INTR }, + { "halt", mconsole_halt, MCONSOLE_PROC }, + { "reboot", mconsole_reboot, MCONSOLE_PROC }, + { "config", mconsole_config, MCONSOLE_PROC }, + { "remove", mconsole_remove, MCONSOLE_PROC }, + { "sysrq", mconsole_sysrq, MCONSOLE_INTR }, + { "help", mconsole_help, MCONSOLE_INTR }, + { "cad", mconsole_cad, MCONSOLE_INTR }, + { "stop", mconsole_stop, MCONSOLE_PROC }, + { "go", mconsole_go, MCONSOLE_INTR }, + { "log", mconsole_log, MCONSOLE_INTR }, + { "proc", mconsole_proc, MCONSOLE_PROC }, +}; + +/* Initialized in mconsole_init, which is an initcall */ +char mconsole_socket_name[256]; + +int mconsole_reply_v0(struct mc_request *req, char *reply) +{ + struct iovec iov; + struct msghdr msg; + + iov.iov_base = reply; + iov.iov_len = strlen(reply); + + msg.msg_name = &(req->origin); + msg.msg_namelen = req->originlen; + msg.msg_iov = &iov; + msg.msg_iovlen = 1; + msg.msg_control = NULL; + msg.msg_controllen = 0; + msg.msg_flags = 0; + + return sendmsg(req->originating_fd, &msg, 0); +} + +static struct mconsole_command *mconsole_parse(struct mc_request *req) +{ + struct mconsole_command *cmd; + int i; + + for(i=0;irequest.data, cmd->command, + strlen(cmd->command))){ + return(cmd); + } + } + return(NULL); +} + +#define MIN(a,b) ((a)<(b) ? (a):(b)) + +#define STRINGX(x) #x +#define STRING(x) STRINGX(x) + +int mconsole_get_request(int fd, struct mc_request *req) +{ + int len; + + req->originlen = sizeof(req->origin); + req->len = recvfrom(fd, &req->request, sizeof(req->request), 0, + (struct sockaddr *) req->origin, &req->originlen); + if (req->len < 0) + return 0; + + req->originating_fd = fd; + + if(req->request.magic != MCONSOLE_MAGIC){ + /* Unversioned request */ + len = MIN(sizeof(req->request.data) - 1, + strlen((char *) &req->request)); + memmove(req->request.data, &req->request, len); + req->request.data[len] = '\0'; + + req->request.magic = MCONSOLE_MAGIC; + req->request.version = 0; + req->request.len = len; + + mconsole_reply_v0(req, "ERR Version 0 mconsole clients are " + "not supported by this driver"); + return(0); + } + + if(req->request.len >= MCONSOLE_MAX_DATA){ + mconsole_reply(req, "Request too large", 1, 0); + return(0); + } + if(req->request.version != MCONSOLE_VERSION){ + mconsole_reply(req, "This driver only supports version " + STRING(MCONSOLE_VERSION) " clients", 1, 0); + } + + req->request.data[req->request.len] = '\0'; + req->cmd = mconsole_parse(req); + if(req->cmd == NULL){ + mconsole_reply(req, "Unknown command", 1, 0); + return(0); + } + + return(1); +} + +int mconsole_reply(struct mc_request *req, char *str, int err, int more) +{ + struct mconsole_reply reply; + int total, len, n; + + total = strlen(str); + do { + reply.err = err; + + /* err can only be true on the first packet */ + err = 0; + + len = MIN(total, MCONSOLE_MAX_DATA - 1); + + if(len == total) reply.more = more; + else reply.more = 1; + + memcpy(reply.data, str, len); + reply.data[len] = '\0'; + total -= len; + str += len; + reply.len = len + 1; + + len = sizeof(reply) + reply.len - sizeof(reply.data); + + n = sendto(req->originating_fd, &reply, len, 0, + (struct sockaddr *) req->origin, req->originlen); + + if(n < 0) return(-errno); + } while(total > 0); + return(0); +} + +int mconsole_unlink_socket(void) +{ + unlink(mconsole_socket_name); + return 0; +} + +static int notify_sock = -1; + +int mconsole_notify(char *sock_name, int type, const void *data, int len) +{ + struct sockaddr_un target; + struct mconsole_notify packet; + int n, err = 0; + + lock_notify(); + if(notify_sock < 0){ + notify_sock = socket(PF_UNIX, SOCK_DGRAM, 0); + if(notify_sock < 0){ + printk("mconsole_notify - socket failed, errno = %d\n", + errno); + err = -errno; + } + } + unlock_notify(); + + if(err) + return(err); + + target.sun_family = AF_UNIX; + strcpy(target.sun_path, sock_name); + + packet.magic = MCONSOLE_MAGIC; + packet.version = MCONSOLE_VERSION; + packet.type = type; + len = (len > sizeof(packet.data)) ? sizeof(packet.data) : len; + packet.len = len; + memcpy(packet.data, data, len); + + err = 0; + len = sizeof(packet) + packet.len - sizeof(packet.data); + n = sendto(notify_sock, &packet, len, 0, (struct sockaddr *) &target, + sizeof(target)); + if(n < 0){ + printk("mconsole_notify - sendto failed, errno = %d\n", errno); + err = -errno; + } + return(err); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c new file mode 100644 index 000000000000..a63231dffe05 --- /dev/null +++ b/arch/um/drivers/mmapper_kern.c @@ -0,0 +1,150 @@ +/* + * arch/um/drivers/mmapper_kern.c + * + * BRIEF MODULE DESCRIPTION + * + * Copyright (C) 2000 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * Greg Lonnon glonnon@ridgerun.com or info@ridgerun.com + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mem_user.h" +#include "user_util.h" + +/* These are set in mmapper_init, which is called at boot time */ +static unsigned long mmapper_size; +static unsigned long p_buf = 0; +static char *v_buf = NULL; + +static ssize_t +mmapper_read(struct file *file, char *buf, size_t count, loff_t *ppos) +{ + if(*ppos > mmapper_size) + return -EINVAL; + + if(count + *ppos > mmapper_size) + count = count + *ppos - mmapper_size; + + if(count < 0) + return -EINVAL; + + copy_to_user(buf,&v_buf[*ppos],count); + + return count; +} + +static ssize_t +mmapper_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +{ + if(*ppos > mmapper_size) + return -EINVAL; + + if(count + *ppos > mmapper_size) + count = count + *ppos - mmapper_size; + + if(count < 0) + return -EINVAL; + + copy_from_user(&v_buf[*ppos],buf,count); + + return count; +} + +static int +mmapper_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + return(-ENOIOCTLCMD); +} + +static int +mmapper_mmap(struct file *file, struct vm_area_struct * vma) +{ + int ret = -EINVAL; + int size; + + lock_kernel(); + if (vma->vm_pgoff != 0) + goto out; + + size = vma->vm_end - vma->vm_start; + if(size > mmapper_size) return(-EFAULT); + + /* XXX A comment above remap_pfn_range says it should only be + * called when the mm semaphore is held + */ + if (remap_pfn_range(vma, vma->vm_start, p_buf >> PAGE_SHIFT, size, + vma->vm_page_prot)) + goto out; + ret = 0; +out: + unlock_kernel(); + return ret; +} + +static int +mmapper_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int +mmapper_release(struct inode *inode, struct file *file) +{ + return 0; +} + +static struct file_operations mmapper_fops = { + .owner = THIS_MODULE, + .read = mmapper_read, + .write = mmapper_write, + .ioctl = mmapper_ioctl, + .mmap = mmapper_mmap, + .open = mmapper_open, + .release = mmapper_release, +}; + +static int __init mmapper_init(void) +{ + printk(KERN_INFO "Mapper v0.1\n"); + + v_buf = (char *) find_iomem("mmapper", &mmapper_size); + if(mmapper_size == 0){ + printk(KERN_ERR "mmapper_init - find_iomem failed\n"); + return(0); + } + + p_buf = __pa(v_buf); + + devfs_mk_cdev(MKDEV(30, 0), S_IFCHR|S_IRUGO|S_IWUGO, "mmapper"); + return(0); +} + +static void mmapper_exit(void) +{ +} + +module_init(mmapper_init); +module_exit(mmapper_exit); + +MODULE_AUTHOR("Greg Lonnon "); +MODULE_DESCRIPTION("DSPLinux simulator mmapper driver"); +/* + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c new file mode 100644 index 000000000000..4eeaf88c1e97 --- /dev/null +++ b/arch/um/drivers/net_kern.c @@ -0,0 +1,896 @@ +/* + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * Licensed under the GPL. + */ + +#include "linux/config.h" +#include "linux/kernel.h" +#include "linux/netdevice.h" +#include "linux/rtnetlink.h" +#include "linux/skbuff.h" +#include "linux/socket.h" +#include "linux/spinlock.h" +#include "linux/module.h" +#include "linux/init.h" +#include "linux/etherdevice.h" +#include "linux/list.h" +#include "linux/inetdevice.h" +#include "linux/ctype.h" +#include "linux/bootmem.h" +#include "linux/ethtool.h" +#include "asm/uaccess.h" +#include "user_util.h" +#include "kern_util.h" +#include "net_kern.h" +#include "net_user.h" +#include "mconsole_kern.h" +#include "init.h" +#include "irq_user.h" +#include "irq_kern.h" + +#define DRIVER_NAME "uml-netdev" + +static DEFINE_SPINLOCK(opened_lock); +LIST_HEAD(opened); + +static int uml_net_rx(struct net_device *dev) +{ + struct uml_net_private *lp = dev->priv; + int pkt_len; + struct sk_buff *skb; + + /* If we can't allocate memory, try again next round. */ + skb = dev_alloc_skb(dev->mtu); + if (skb == NULL) { + lp->stats.rx_dropped++; + return 0; + } + + skb->dev = dev; + skb_put(skb, dev->mtu); + skb->mac.raw = skb->data; + pkt_len = (*lp->read)(lp->fd, &skb, lp); + + if (pkt_len > 0) { + skb_trim(skb, pkt_len); + skb->protocol = (*lp->protocol)(skb); + netif_rx(skb); + + lp->stats.rx_bytes += skb->len; + lp->stats.rx_packets++; + return pkt_len; + } + + kfree_skb(skb); + return pkt_len; +} + +irqreturn_t uml_net_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct uml_net_private *lp = dev->priv; + int err; + + if(!netif_running(dev)) + return(IRQ_NONE); + + spin_lock(&lp->lock); + while((err = uml_net_rx(dev)) > 0) ; + if(err < 0) { + printk(KERN_ERR + "Device '%s' read returned %d, shutting it down\n", + dev->name, err); + dev_close(dev); + goto out; + } + reactivate_fd(lp->fd, UM_ETH_IRQ); + + out: + spin_unlock(&lp->lock); + return(IRQ_HANDLED); +} + +static int uml_net_open(struct net_device *dev) +{ + struct uml_net_private *lp = dev->priv; + char addr[sizeof("255.255.255.255\0")]; + int err; + + spin_lock(&lp->lock); + + if(lp->fd >= 0){ + err = -ENXIO; + goto out; + } + + if(!lp->have_mac){ + dev_ip_addr(dev, addr, &lp->mac[2]); + set_ether_mac(dev, lp->mac); + } + + lp->fd = (*lp->open)(&lp->user); + if(lp->fd < 0){ + err = lp->fd; + goto out; + } + + err = um_request_irq(dev->irq, lp->fd, IRQ_READ, uml_net_interrupt, + SA_INTERRUPT | SA_SHIRQ, dev->name, dev); + if(err != 0){ + printk(KERN_ERR "uml_net_open: failed to get irq(%d)\n", err); + if(lp->close != NULL) (*lp->close)(lp->fd, &lp->user); + lp->fd = -1; + err = -ENETUNREACH; + } + + lp->tl.data = (unsigned long) &lp->user; + netif_start_queue(dev); + + /* clear buffer - it can happen that the host side of the interface + * is full when we get here. In this case, new data is never queued, + * SIGIOs never arrive, and the net never works. + */ + while((err = uml_net_rx(dev)) > 0) ; + + out: + spin_unlock(&lp->lock); + return(err); +} + +static int uml_net_close(struct net_device *dev) +{ + struct uml_net_private *lp = dev->priv; + + netif_stop_queue(dev); + spin_lock(&lp->lock); + + free_irq_by_irq_and_dev(dev->irq, dev); + free_irq(dev->irq, dev); + if(lp->close != NULL) + (*lp->close)(lp->fd, &lp->user); + lp->fd = -1; + + spin_unlock(&lp->lock); + return 0; +} + +static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct uml_net_private *lp = dev->priv; + unsigned long flags; + int len; + + netif_stop_queue(dev); + + spin_lock_irqsave(&lp->lock, flags); + + len = (*lp->write)(lp->fd, &skb, lp); + + if(len == skb->len) { + lp->stats.tx_packets++; + lp->stats.tx_bytes += skb->len; + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* this is normally done in the interrupt when tx finishes */ + netif_wake_queue(dev); + } + else if(len == 0){ + netif_start_queue(dev); + lp->stats.tx_dropped++; + } + else { + netif_start_queue(dev); + printk(KERN_ERR "uml_net_start_xmit: failed(%d)\n", len); + } + + spin_unlock_irqrestore(&lp->lock, flags); + + dev_kfree_skb(skb); + + return 0; +} + +static struct net_device_stats *uml_net_get_stats(struct net_device *dev) +{ + struct uml_net_private *lp = dev->priv; + return &lp->stats; +} + +static void uml_net_set_multicast_list(struct net_device *dev) +{ + if (dev->flags & IFF_PROMISC) return; + else if (dev->mc_count) dev->flags |= IFF_ALLMULTI; + else dev->flags &= ~IFF_ALLMULTI; +} + +static void uml_net_tx_timeout(struct net_device *dev) +{ + dev->trans_start = jiffies; + netif_wake_queue(dev); +} + +static int uml_net_set_mac(struct net_device *dev, void *addr) +{ + struct uml_net_private *lp = dev->priv; + struct sockaddr *hwaddr = addr; + + spin_lock(&lp->lock); + memcpy(dev->dev_addr, hwaddr->sa_data, ETH_ALEN); + spin_unlock(&lp->lock); + + return(0); +} + +static int uml_net_change_mtu(struct net_device *dev, int new_mtu) +{ + struct uml_net_private *lp = dev->priv; + int err = 0; + + spin_lock(&lp->lock); + + new_mtu = (*lp->set_mtu)(new_mtu, &lp->user); + if(new_mtu < 0){ + err = new_mtu; + goto out; + } + + dev->mtu = new_mtu; + + out: + spin_unlock(&lp->lock); + return err; +} + +static int uml_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + static const struct ethtool_drvinfo info = { + .cmd = ETHTOOL_GDRVINFO, + .driver = DRIVER_NAME, + .version = "42", + }; + void *useraddr; + u32 ethcmd; + + switch (cmd) { + case SIOCETHTOOL: + useraddr = ifr->ifr_data; + if (copy_from_user(ðcmd, useraddr, sizeof(ethcmd))) + return -EFAULT; + switch (ethcmd) { + case ETHTOOL_GDRVINFO: + if (copy_to_user(useraddr, &info, sizeof(info))) + return -EFAULT; + return 0; + default: + return -EOPNOTSUPP; + } + default: + return -EINVAL; + } +} + +void uml_net_user_timer_expire(unsigned long _conn) +{ +#ifdef undef + struct connection *conn = (struct connection *)_conn; + + dprintk(KERN_INFO "uml_net_user_timer_expire [%p]\n", conn); + do_connect(conn); +#endif +} + +static DEFINE_SPINLOCK(devices_lock); +static struct list_head devices = LIST_HEAD_INIT(devices); + +static struct device_driver uml_net_driver = { + .name = DRIVER_NAME, + .bus = &platform_bus_type, +}; +static int driver_registered; + +static int eth_configure(int n, void *init, char *mac, + struct transport *transport) +{ + struct uml_net *device; + struct net_device *dev; + struct uml_net_private *lp; + int save, err, size; + + size = transport->private_size + sizeof(struct uml_net_private) + + sizeof(((struct uml_net_private *) 0)->user); + + device = kmalloc(sizeof(*device), GFP_KERNEL); + if (device == NULL) { + printk(KERN_ERR "eth_configure failed to allocate uml_net\n"); + return(1); + } + + memset(device, 0, sizeof(*device)); + INIT_LIST_HEAD(&device->list); + device->index = n; + + spin_lock(&devices_lock); + list_add(&device->list, &devices); + spin_unlock(&devices_lock); + + if (setup_etheraddr(mac, device->mac)) + device->have_mac = 1; + + printk(KERN_INFO "Netdevice %d ", n); + if (device->have_mac) + printk("(%02x:%02x:%02x:%02x:%02x:%02x) ", + device->mac[0], device->mac[1], + device->mac[2], device->mac[3], + device->mac[4], device->mac[5]); + printk(": "); + dev = alloc_etherdev(size); + if (dev == NULL) { + printk(KERN_ERR "eth_configure: failed to allocate device\n"); + return 1; + } + + /* sysfs register */ + if (!driver_registered) { + driver_register(¨_net_driver); + driver_registered = 1; + } + device->pdev.id = n; + device->pdev.name = DRIVER_NAME; + platform_device_register(&device->pdev); + SET_NETDEV_DEV(dev,&device->pdev.dev); + + /* If this name ends up conflicting with an existing registered + * netdevice, that is OK, register_netdev{,ice}() will notice this + * and fail. + */ + snprintf(dev->name, sizeof(dev->name), "eth%d", n); + device->dev = dev; + + (*transport->kern->init)(dev, init); + + dev->mtu = transport->user->max_packet; + dev->open = uml_net_open; + dev->hard_start_xmit = uml_net_start_xmit; + dev->stop = uml_net_close; + dev->get_stats = uml_net_get_stats; + dev->set_multicast_list = uml_net_set_multicast_list; + dev->tx_timeout = uml_net_tx_timeout; + dev->set_mac_address = uml_net_set_mac; + dev->change_mtu = uml_net_change_mtu; + dev->do_ioctl = uml_net_ioctl; + dev->watchdog_timeo = (HZ >> 1); + dev->irq = UM_ETH_IRQ; + + rtnl_lock(); + err = register_netdevice(dev); + rtnl_unlock(); + if (err) { + device->dev = NULL; + /* XXX: should we call ->remove() here? */ + free_netdev(dev); + return 1; + } + lp = dev->priv; + + /* lp.user is the first four bytes of the transport data, which + * has already been initialized. This structure assignment will + * overwrite that, so we make sure that .user gets overwritten with + * what it already has. + */ + save = lp->user[0]; + *lp = ((struct uml_net_private) + { .list = LIST_HEAD_INIT(lp->list), + .dev = dev, + .fd = -1, + .mac = { 0xfe, 0xfd, 0x0, 0x0, 0x0, 0x0}, + .have_mac = device->have_mac, + .protocol = transport->kern->protocol, + .open = transport->user->open, + .close = transport->user->close, + .remove = transport->user->remove, + .read = transport->kern->read, + .write = transport->kern->write, + .add_address = transport->user->add_address, + .delete_address = transport->user->delete_address, + .set_mtu = transport->user->set_mtu, + .user = { save } }); + + init_timer(&lp->tl); + spin_lock_init(&lp->lock); + lp->tl.function = uml_net_user_timer_expire; + if (lp->have_mac) + memcpy(lp->mac, device->mac, sizeof(lp->mac)); + + if (transport->user->init) + (*transport->user->init)(&lp->user, dev); + + if (device->have_mac) + set_ether_mac(dev, device->mac); + + spin_lock(&opened_lock); + list_add(&lp->list, &opened); + spin_unlock(&opened_lock); + + return(0); +} + +static struct uml_net *find_device(int n) +{ + struct uml_net *device; + struct list_head *ele; + + spin_lock(&devices_lock); + list_for_each(ele, &devices){ + device = list_entry(ele, struct uml_net, list); + if(device->index == n) + goto out; + } + device = NULL; + out: + spin_unlock(&devices_lock); + return(device); +} + +static int eth_parse(char *str, int *index_out, char **str_out) +{ + char *end; + int n; + + n = simple_strtoul(str, &end, 0); + if(end == str){ + printk(KERN_ERR "eth_setup: Failed to parse '%s'\n", str); + return(1); + } + if(n < 0){ + printk(KERN_ERR "eth_setup: device %d is negative\n", n); + return(1); + } + str = end; + if(*str != '='){ + printk(KERN_ERR + "eth_setup: expected '=' after device number\n"); + return(1); + } + str++; + if(find_device(n)){ + printk(KERN_ERR "eth_setup: Device %d already configured\n", + n); + return(1); + } + if(index_out) *index_out = n; + *str_out = str; + return(0); +} + +struct eth_init { + struct list_head list; + char *init; + int index; +}; + +/* Filled in at boot time. Will need locking if the transports become + * modular. + */ +struct list_head transports = LIST_HEAD_INIT(transports); + +/* Filled in during early boot */ +struct list_head eth_cmd_line = LIST_HEAD_INIT(eth_cmd_line); + +static int check_transport(struct transport *transport, char *eth, int n, + void **init_out, char **mac_out) +{ + int len; + + len = strlen(transport->name); + if(strncmp(eth, transport->name, len)) + return(0); + + eth += len; + if(*eth == ',') + eth++; + else if(*eth != '\0') + return(0); + + *init_out = kmalloc(transport->setup_size, GFP_KERNEL); + if(*init_out == NULL) + return(1); + + if(!transport->setup(eth, mac_out, *init_out)){ + kfree(*init_out); + *init_out = NULL; + } + return(1); +} + +void register_transport(struct transport *new) +{ + struct list_head *ele, *next; + struct eth_init *eth; + void *init; + char *mac = NULL; + int match; + + list_add(&new->list, &transports); + + list_for_each_safe(ele, next, ð_cmd_line){ + eth = list_entry(ele, struct eth_init, list); + match = check_transport(new, eth->init, eth->index, &init, + &mac); + if(!match) + continue; + else if(init != NULL){ + eth_configure(eth->index, init, mac, new); + kfree(init); + } + list_del(ð->list); + } +} + +static int eth_setup_common(char *str, int index) +{ + struct list_head *ele; + struct transport *transport; + void *init; + char *mac = NULL; + + list_for_each(ele, &transports){ + transport = list_entry(ele, struct transport, list); + if(!check_transport(transport, str, index, &init, &mac)) + continue; + if(init != NULL){ + eth_configure(index, init, mac, transport); + kfree(init); + } + return(1); + } + return(0); +} + +static int eth_setup(char *str) +{ + struct eth_init *new; + int n, err; + + err = eth_parse(str, &n, &str); + if(err) return(1); + + new = alloc_bootmem(sizeof(new)); + if (new == NULL){ + printk("eth_init : alloc_bootmem failed\n"); + return(1); + } + + INIT_LIST_HEAD(&new->list); + new->index = n; + new->init = str; + + list_add_tail(&new->list, ð_cmd_line); + return(1); +} + +__setup("eth", eth_setup); +__uml_help(eth_setup, +"eth[0-9]+=,\n" +" Configure a network device.\n\n" +); + +#if 0 +static int eth_init(void) +{ + struct list_head *ele, *next; + struct eth_init *eth; + + list_for_each_safe(ele, next, ð_cmd_line){ + eth = list_entry(ele, struct eth_init, list); + + if(eth_setup_common(eth->init, eth->index)) + list_del(ð->list); + } + + return(1); +} +__initcall(eth_init); +#endif + +static int net_config(char *str) +{ + int n, err; + + err = eth_parse(str, &n, &str); + if(err) return(err); + + str = uml_strdup(str); + if(str == NULL){ + printk(KERN_ERR "net_config failed to strdup string\n"); + return(-1); + } + err = !eth_setup_common(str, n); + if(err) + kfree(str); + return(err); +} + +static int net_remove(char *str) +{ + struct uml_net *device; + struct net_device *dev; + struct uml_net_private *lp; + char *end; + int n; + + n = simple_strtoul(str, &end, 0); + if((*end != '\0') || (end == str)) + return(-1); + + device = find_device(n); + if(device == NULL) + return(0); + + dev = device->dev; + lp = dev->priv; + if(lp->fd > 0) return(-1); + if(lp->remove != NULL) (*lp->remove)(&lp->user); + unregister_netdev(dev); + platform_device_unregister(&device->pdev); + + list_del(&device->list); + kfree(device); + free_netdev(dev); + return(0); +} + +static struct mc_device net_mc = { + .name = "eth", + .config = net_config, + .get_config = NULL, + .remove = net_remove, +}; + +static int uml_inetaddr_event(struct notifier_block *this, unsigned long event, + void *ptr) +{ + struct in_ifaddr *ifa = ptr; + u32 addr = ifa->ifa_address; + u32 netmask = ifa->ifa_mask; + struct net_device *dev = ifa->ifa_dev->dev; + struct uml_net_private *lp; + void (*proc)(unsigned char *, unsigned char *, void *); + unsigned char addr_buf[4], netmask_buf[4]; + + if(dev->open != uml_net_open) return(NOTIFY_DONE); + + lp = dev->priv; + + proc = NULL; + switch (event){ + case NETDEV_UP: + proc = lp->add_address; + break; + case NETDEV_DOWN: + proc = lp->delete_address; + break; + } + if(proc != NULL){ + addr_buf[0] = addr & 0xff; + addr_buf[1] = (addr >> 8) & 0xff; + addr_buf[2] = (addr >> 16) & 0xff; + addr_buf[3] = addr >> 24; + netmask_buf[0] = netmask & 0xff; + netmask_buf[1] = (netmask >> 8) & 0xff; + netmask_buf[2] = (netmask >> 16) & 0xff; + netmask_buf[3] = netmask >> 24; + (*proc)(addr_buf, netmask_buf, &lp->user); + } + return(NOTIFY_DONE); +} + +struct notifier_block uml_inetaddr_notifier = { + .notifier_call = uml_inetaddr_event, +}; + +static int uml_net_init(void) +{ + struct list_head *ele; + struct uml_net_private *lp; + struct in_device *ip; + struct in_ifaddr *in; + + mconsole_register_dev(&net_mc); + register_inetaddr_notifier(¨_inetaddr_notifier); + + /* Devices may have been opened already, so the uml_inetaddr_notifier + * didn't get a chance to run for them. This fakes it so that + * addresses which have already been set up get handled properly. + */ + list_for_each(ele, &opened){ + lp = list_entry(ele, struct uml_net_private, list); + ip = lp->dev->ip_ptr; + if(ip == NULL) continue; + in = ip->ifa_list; + while(in != NULL){ + uml_inetaddr_event(NULL, NETDEV_UP, in); + in = in->ifa_next; + } + } + + return(0); +} + +__initcall(uml_net_init); + +static void close_devices(void) +{ + struct list_head *ele; + struct uml_net_private *lp; + + list_for_each(ele, &opened){ + lp = list_entry(ele, struct uml_net_private, list); + if((lp->close != NULL) && (lp->fd >= 0)) + (*lp->close)(lp->fd, &lp->user); + if(lp->remove != NULL) (*lp->remove)(&lp->user); + } +} + +__uml_exitcall(close_devices); + +int setup_etheraddr(char *str, unsigned char *addr) +{ + char *end; + int i; + + if(str == NULL) + return(0); + for(i=0;i<6;i++){ + addr[i] = simple_strtoul(str, &end, 16); + if((end == str) || + ((*end != ':') && (*end != ',') && (*end != '\0'))){ + printk(KERN_ERR + "setup_etheraddr: failed to parse '%s' " + "as an ethernet address\n", str); + return(0); + } + str = end + 1; + } + if(addr[0] & 1){ + printk(KERN_ERR + "Attempt to assign a broadcast ethernet address to a " + "device disallowed\n"); + return(0); + } + return(1); +} + +void dev_ip_addr(void *d, char *buf, char *bin_buf) +{ + struct net_device *dev = d; + struct in_device *ip = dev->ip_ptr; + struct in_ifaddr *in; + u32 addr; + + if((ip == NULL) || ((in = ip->ifa_list) == NULL)){ + printk(KERN_WARNING "dev_ip_addr - device not assigned an " + "IP address\n"); + return; + } + addr = in->ifa_address; + sprintf(buf, "%d.%d.%d.%d", addr & 0xff, (addr >> 8) & 0xff, + (addr >> 16) & 0xff, addr >> 24); + if(bin_buf){ + bin_buf[0] = addr & 0xff; + bin_buf[1] = (addr >> 8) & 0xff; + bin_buf[2] = (addr >> 16) & 0xff; + bin_buf[3] = addr >> 24; + } +} + +void set_ether_mac(void *d, unsigned char *addr) +{ + struct net_device *dev = d; + + memcpy(dev->dev_addr, addr, ETH_ALEN); +} + +struct sk_buff *ether_adjust_skb(struct sk_buff *skb, int extra) +{ + if((skb != NULL) && (skb_tailroom(skb) < extra)){ + struct sk_buff *skb2; + + skb2 = skb_copy_expand(skb, 0, extra, GFP_ATOMIC); + dev_kfree_skb(skb); + skb = skb2; + } + if(skb != NULL) skb_put(skb, extra); + return(skb); +} + +void iter_addresses(void *d, void (*cb)(unsigned char *, unsigned char *, + void *), + void *arg) +{ + struct net_device *dev = d; + struct in_device *ip = dev->ip_ptr; + struct in_ifaddr *in; + unsigned char address[4], netmask[4]; + + if(ip == NULL) return; + in = ip->ifa_list; + while(in != NULL){ + address[0] = in->ifa_address & 0xff; + address[1] = (in->ifa_address >> 8) & 0xff; + address[2] = (in->ifa_address >> 16) & 0xff; + address[3] = in->ifa_address >> 24; + netmask[0] = in->ifa_mask & 0xff; + netmask[1] = (in->ifa_mask >> 8) & 0xff; + netmask[2] = (in->ifa_mask >> 16) & 0xff; + netmask[3] = in->ifa_mask >> 24; + (*cb)(address, netmask, arg); + in = in->ifa_next; + } +} + +int dev_netmask(void *d, void *m) +{ + struct net_device *dev = d; + struct in_device *ip = dev->ip_ptr; + struct in_ifaddr *in; + __u32 *mask_out = m; + + if(ip == NULL) + return(1); + + in = ip->ifa_list; + if(in == NULL) + return(1); + + *mask_out = in->ifa_mask; + return(0); +} + +void *get_output_buffer(int *len_out) +{ + void *ret; + + ret = (void *) __get_free_pages(GFP_KERNEL, 0); + if(ret) *len_out = PAGE_SIZE; + else *len_out = 0; + return(ret); +} + +void free_output_buffer(void *buffer) +{ + free_pages((unsigned long) buffer, 0); +} + +int tap_setup_common(char *str, char *type, char **dev_name, char **mac_out, + char **gate_addr) +{ + char *remain; + + remain = split_if_spec(str, dev_name, mac_out, gate_addr, NULL); + if(remain != NULL){ + printk("tap_setup_common - Extra garbage on specification : " + "'%s'\n", remain); + return(1); + } + + return(0); +} + +unsigned short eth_protocol(struct sk_buff *skb) +{ + return(eth_type_trans(skb, skb->dev)); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c new file mode 100644 index 000000000000..47229fe4a813 --- /dev/null +++ b/arch/um/drivers/net_user.c @@ -0,0 +1,255 @@ +/* + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user.h" +#include "user_util.h" +#include "kern_util.h" +#include "net_user.h" +#include "helper.h" +#include "os.h" + +int tap_open_common(void *dev, char *gate_addr) +{ + int tap_addr[4]; + + if(gate_addr == NULL) return(0); + if(sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0], + &tap_addr[1], &tap_addr[2], &tap_addr[3]) != 4){ + printk("Invalid tap IP address - '%s'\n", gate_addr); + return(-EINVAL); + } + return(0); +} + +void tap_check_ips(char *gate_addr, char *eth_addr) +{ + int tap_addr[4]; + + if((gate_addr != NULL) && + (sscanf(gate_addr, "%d.%d.%d.%d", &tap_addr[0], + &tap_addr[1], &tap_addr[2], &tap_addr[3]) == 4) && + (eth_addr[0] == tap_addr[0]) && + (eth_addr[1] == tap_addr[1]) && + (eth_addr[2] == tap_addr[2]) && + (eth_addr[3] == tap_addr[3])){ + printk("The tap IP address and the UML eth IP address" + " must be different\n"); + } +} + +void read_output(int fd, char *output, int len) +{ + int remain, n, actual; + char c; + + if(output == NULL){ + output = &c; + len = sizeof(c); + } + + *output = '\0'; + n = os_read_file(fd, &remain, sizeof(remain)); + if(n != sizeof(remain)){ + printk("read_output - read of length failed, err = %d\n", -n); + return; + } + + while(remain != 0){ + n = (remain < len) ? remain : len; + actual = os_read_file(fd, output, n); + if(actual != n){ + printk("read_output - read of data failed, " + "err = %d\n", -actual); + return; + } + remain -= actual; + } + return; +} + +int net_read(int fd, void *buf, int len) +{ + int n; + + n = os_read_file(fd, buf, len); + + if(n == -EAGAIN) + return(0); + else if(n == 0) + return(-ENOTCONN); + return(n); +} + +int net_recvfrom(int fd, void *buf, int len) +{ + int n; + + while(((n = recvfrom(fd, buf, len, 0, NULL, NULL)) < 0) && + (errno == EINTR)) ; + + if(n < 0){ + if(errno == EAGAIN) return(0); + return(-errno); + } + else if(n == 0) return(-ENOTCONN); + return(n); +} + +int net_write(int fd, void *buf, int len) +{ + int n; + + n = os_write_file(fd, buf, len); + + if(n == -EAGAIN) + return(0); + else if(n == 0) + return(-ENOTCONN); + return(n); +} + +int net_send(int fd, void *buf, int len) +{ + int n; + + while(((n = send(fd, buf, len, 0)) < 0) && (errno == EINTR)) ; + if(n < 0){ + if(errno == EAGAIN) return(0); + return(-errno); + } + else if(n == 0) return(-ENOTCONN); + return(n); +} + +int net_sendto(int fd, void *buf, int len, void *to, int sock_len) +{ + int n; + + while(((n = sendto(fd, buf, len, 0, (struct sockaddr *) to, + sock_len)) < 0) && (errno == EINTR)) ; + if(n < 0){ + if(errno == EAGAIN) return(0); + return(-errno); + } + else if(n == 0) return(-ENOTCONN); + return(n); +} + +struct change_pre_exec_data { + int close_me; + int stdout; +}; + +static void change_pre_exec(void *arg) +{ + struct change_pre_exec_data *data = arg; + + os_close_file(data->close_me); + dup2(data->stdout, 1); +} + +static int change_tramp(char **argv, char *output, int output_len) +{ + int pid, fds[2], err; + struct change_pre_exec_data pe_data; + + err = os_pipe(fds, 1, 0); + if(err < 0){ + printk("change_tramp - pipe failed, err = %d\n", -err); + return(err); + } + pe_data.close_me = fds[0]; + pe_data.stdout = fds[1]; + pid = run_helper(change_pre_exec, &pe_data, argv, NULL); + + read_output(fds[0], output, output_len); + os_close_file(fds[0]); + os_close_file(fds[1]); + + if (pid > 0) + CATCH_EINTR(err = waitpid(pid, NULL, 0)); + return(pid); +} + +static void change(char *dev, char *what, unsigned char *addr, + unsigned char *netmask) +{ + char addr_buf[sizeof("255.255.255.255\0")]; + char netmask_buf[sizeof("255.255.255.255\0")]; + char version[sizeof("nnnnn\0")]; + char *argv[] = { "uml_net", version, what, dev, addr_buf, + netmask_buf, NULL }; + char *output; + int output_len, pid; + + sprintf(version, "%d", UML_NET_VERSION); + sprintf(addr_buf, "%d.%d.%d.%d", addr[0], addr[1], addr[2], addr[3]); + sprintf(netmask_buf, "%d.%d.%d.%d", netmask[0], netmask[1], + netmask[2], netmask[3]); + + output_len = page_size(); + output = um_kmalloc(output_len); + if(output == NULL) + printk("change : failed to allocate output buffer\n"); + + pid = change_tramp(argv, output, output_len); + if(pid < 0) return; + + if(output != NULL){ + printk("%s", output); + kfree(output); + } +} + +void open_addr(unsigned char *addr, unsigned char *netmask, void *arg) +{ + change(arg, "add", addr, netmask); +} + +void close_addr(unsigned char *addr, unsigned char *netmask, void *arg) +{ + change(arg, "del", addr, netmask); +} + +char *split_if_spec(char *str, ...) +{ + char **arg, *end; + va_list ap; + + va_start(ap, str); + while((arg = va_arg(ap, char **)) != NULL){ + if(*str == '\0') + return(NULL); + end = strchr(str, ','); + if(end != str) + *arg = str; + if(end == NULL) + return(NULL); + *end++ = '\0'; + str = end; + } + va_end(ap); + return(str); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/null.c b/arch/um/drivers/null.c new file mode 100644 index 000000000000..14cc5f78398a --- /dev/null +++ b/arch/um/drivers/null.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include "chan_user.h" +#include "os.h" + +static int null_chan; + +static void *null_init(char *str, int device, struct chan_opts *opts) +{ + return(&null_chan); +} + +static int null_open(int input, int output, int primary, void *d, + char **dev_out) +{ + *dev_out = NULL; + return(os_open_file(DEV_NULL, of_rdwr(OPENFLAGS()), 0)); +} + +static int null_read(int fd, char *c_out, void *unused) +{ + return(-ENODEV); +} + +static void null_free(void *data) +{ +} + +struct chan_ops null_ops = { + .type = "null", + .init = null_init, + .open = null_open, + .close = generic_close, + .read = null_read, + .write = generic_write, + .console_write = generic_console_write, + .window_size = generic_window_size, + .free = null_free, + .winch = 0, +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/pcap_kern.c b/arch/um/drivers/pcap_kern.c new file mode 100644 index 000000000000..07c80f2156ef --- /dev/null +++ b/arch/um/drivers/pcap_kern.c @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2002 Jeff Dike + * Licensed under the GPL. + */ + +#include "linux/init.h" +#include "linux/netdevice.h" +#include "linux/etherdevice.h" +#include "net_kern.h" +#include "net_user.h" +#include "pcap_user.h" + +struct pcap_init { + char *host_if; + int promisc; + int optimize; + char *filter; +}; + +void pcap_init(struct net_device *dev, void *data) +{ + struct uml_net_private *pri; + struct pcap_data *ppri; + struct pcap_init *init = data; + + pri = dev->priv; + ppri = (struct pcap_data *) pri->user; + ppri->host_if = init->host_if; + ppri->promisc = init->promisc; + ppri->optimize = init->optimize; + ppri->filter = init->filter; +} + +static int pcap_read(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + *skb = ether_adjust_skb(*skb, ETH_HEADER_OTHER); + if(*skb == NULL) return(-ENOMEM); + return(pcap_user_read(fd, (*skb)->mac.raw, + (*skb)->dev->mtu + ETH_HEADER_OTHER, + (struct pcap_data *) &lp->user)); +} + +static int pcap_write(int fd, struct sk_buff **skb, struct uml_net_private *lp) +{ + return(-EPERM); +} + +static struct net_kern_info pcap_kern_info = { + .init = pcap_init, + .protocol = eth_protocol, + .read = pcap_read, + .write = pcap_write, +}; + +int pcap_setup(char *str, char **mac_out, void *data) +{ + struct pcap_init *init = data; + char *remain, *host_if = NULL, *options[2] = { NULL, NULL }; + int i; + + *init = ((struct pcap_init) + { .host_if = "eth0", + .promisc = 1, + .optimize = 0, + .filter = NULL }); + + remain = split_if_spec(str, &host_if, &init->filter, + &options[0], &options[1], NULL); + if(remain != NULL){ + printk(KERN_ERR "pcap_setup - Extra garbage on " + "specification : '%s'\n", remain); + return(0); + } + + if(host_if != NULL) + init->host_if = host_if; + + for(i = 0; i < sizeof(options)/sizeof(options[0]); i++){ + if(options[i] == NULL) + continue; + if(!strcmp(options[i], "promisc")) + init->promisc = 1; + else if(!strcmp(options[i], "nopromisc")) + init->promisc = 0; + else if(!strcmp(options[i], "optimize")) + init->optimize = 1; + else if(!strcmp(options[i], "nooptimize")) + init->optimize = 0; + else printk("pcap_setup : bad option - '%s'\n", options[i]); + } + + return(1); +} + +static struct transport pcap_transport = { + .list = LIST_HEAD_INIT(pcap_transport.list), + .name = "pcap", + .setup = pcap_setup, + .user = &pcap_user_info, + .kern = &pcap_kern_info, + .private_size = sizeof(struct pcap_data), + .setup_size = sizeof(struct pcap_init), +}; + +static int register_pcap(void) +{ + register_transport(&pcap_transport); + return(1); +} + +__initcall(register_pcap); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c new file mode 100644 index 000000000000..edfcb29273e1 --- /dev/null +++ b/arch/um/drivers/pcap_user.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2002 Jeff Dike + * Licensed under the GPL. + */ + +#include +#include +#include +#include +#include +#include +#include "net_user.h" +#include "pcap_user.h" +#include "user.h" + +#define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) + +#define PCAP_FD(p) (*(int *)(p)) + +static void pcap_user_init(void *data, void *dev) +{ + struct pcap_data *pri = data; + pcap_t *p; + char errors[PCAP_ERRBUF_SIZE]; + + p = pcap_open_live(pri->host_if, MAX_PACKET, pri->promisc, 0, errors); + if(p == NULL){ + printk("pcap_user_init : pcap_open_live failed - '%s'\n", + errors); + return; + } + + pri->dev = dev; + pri->pcap = p; +} + +static int pcap_open(void *data) +{ + struct pcap_data *pri = data; + __u32 netmask; + int err; + + if(pri->pcap == NULL) + return(-ENODEV); + + if(pri->filter != NULL){ + err = dev_netmask(pri->dev, &netmask); + if(err < 0){ + printk("pcap_open : dev_netmask failed\n"); + return(-EIO); + } + + pri->compiled = um_kmalloc(sizeof(struct bpf_program)); + if(pri->compiled == NULL){ + printk("pcap_open : kmalloc failed\n"); + return(-ENOMEM); + } + + err = pcap_compile(pri->pcap, + (struct bpf_program *) pri->compiled, + pri->filter, pri->optimize, netmask); + if(err < 0){ + printk("pcap_open : pcap_compile failed - '%s'\n", + pcap_geterr(pri->pcap)); + return(-EIO); + } + + err = pcap_setfilter(pri->pcap, pri->compiled); + if(err < 0){ + printk("pcap_open : pcap_setfilter failed - '%s'\n", + pcap_geterr(pri->pcap)); + return(-EIO); + } + } + + return(PCAP_FD(pri->pcap)); +} + +static void pcap_remove(void *data) +{ + struct pcap_data *pri = data; + + if(pri->compiled != NULL) + pcap_freecode(pri->compiled); + + pcap_close(pri->pcap); +} + +struct pcap_handler_data { + char *buffer; + int len; +}; + +static void handler(u_char *data, const struct pcap_pkthdr *header, + const u_char *packet) +{ + int len; + + struct pcap_handler_data *hdata = (struct pcap_handler_data *) data; + + len = hdata->len < header->caplen ? hdata->len : header->caplen; + memcpy(hdata->buffer, packet, len); + hdata->len = len; +} + +int pcap_user_read(int fd, void *buffer, int len, struct pcap_data *pri) +{ + struct pcap_handler_data hdata = ((struct pcap_handler_data) + { .buffer = buffer, + .len = len }); + int n; + + n = pcap_dispatch(pri->pcap, 1, handler, (u_char *) &hdata); + if(n < 0){ + printk("pcap_dispatch failed - %s\n", pcap_geterr(pri->pcap)); + return(-EIO); + } + else if(n == 0) + return(0); + return(hdata.len); +} + +struct net_user_info pcap_user_info = { + .init = pcap_user_init, + .open = pcap_open, + .close = NULL, + .remove = pcap_remove, + .set_mtu = NULL, + .add_address = NULL, + .delete_address = NULL, + .max_packet = MAX_PACKET - ETH_HEADER_OTHER +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/pcap_user.h b/arch/um/drivers/pcap_user.h new file mode 100644 index 000000000000..58f9f6a1420f --- /dev/null +++ b/arch/um/drivers/pcap_user.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "net_user.h" + +struct pcap_data { + char *host_if; + int promisc; + int optimize; + char *filter; + void *compiled; + void *pcap; + void *dev; +}; + +extern struct net_user_info pcap_user_info; + +extern int pcap_user_read(int fd, void *buf, int len, struct pcap_data *pri); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/port.h b/arch/um/drivers/port.h new file mode 100644 index 000000000000..9117609a575d --- /dev/null +++ b/arch/um/drivers/port.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __PORT_H__ +#define __PORT_H__ + +extern void *port_data(int port); +extern int port_wait(void *data); +extern void port_kern_close(void *d); +extern int port_connection(int fd, int *socket_out, int *pid_out); +extern int port_listen_fd(int port); +extern void port_read(int fd, void *data); +extern void port_kern_free(void *d); +extern int port_rcv_fd(int fd); +extern void port_remove_dev(void *d); + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/port_kern.c b/arch/um/drivers/port_kern.c new file mode 100644 index 000000000000..b5ee07472f79 --- /dev/null +++ b/arch/um/drivers/port_kern.c @@ -0,0 +1,309 @@ +/* + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/list.h" +#include "linux/sched.h" +#include "linux/slab.h" +#include "linux/interrupt.h" +#include "linux/irq.h" +#include "linux/spinlock.h" +#include "linux/errno.h" +#include "asm/atomic.h" +#include "asm/semaphore.h" +#include "asm/errno.h" +#include "kern_util.h" +#include "kern.h" +#include "irq_user.h" +#include "irq_kern.h" +#include "port.h" +#include "init.h" +#include "os.h" + +struct port_list { + struct list_head list; + atomic_t wait_count; + int has_connection; + struct completion done; + int port; + int fd; + spinlock_t lock; + struct list_head pending; + struct list_head connections; +}; + +struct port_dev { + struct port_list *port; + int helper_pid; + int telnetd_pid; +}; + +struct connection { + struct list_head list; + int fd; + int helper_pid; + int socket[2]; + int telnetd_pid; + struct port_list *port; +}; + +static irqreturn_t pipe_interrupt(int irq, void *data, struct pt_regs *regs) +{ + struct connection *conn = data; + int fd; + + fd = os_rcv_fd(conn->socket[0], &conn->helper_pid); + if(fd < 0){ + if(fd == -EAGAIN) + return(IRQ_NONE); + + printk(KERN_ERR "pipe_interrupt : os_rcv_fd returned %d\n", + -fd); + os_close_file(conn->fd); + } + + list_del(&conn->list); + + conn->fd = fd; + list_add(&conn->list, &conn->port->connections); + + complete(&conn->port->done); + return(IRQ_HANDLED); +} + +#define NO_WAITER_MSG \ + "****\n" \ + "There are currently no UML consoles waiting for port connections.\n" \ + "Either disconnect from one to make it available or activate some more\n" \ + "by enabling more consoles in the UML /etc/inittab.\n" \ + "****\n" + +static int port_accept(struct port_list *port) +{ + struct connection *conn; + int fd, socket[2], pid, ret = 0; + + fd = port_connection(port->fd, socket, &pid); + if(fd < 0){ + if(fd != -EAGAIN) + printk(KERN_ERR "port_accept : port_connection " + "returned %d\n", -fd); + goto out; + } + + conn = kmalloc(sizeof(*conn), GFP_ATOMIC); + if(conn == NULL){ + printk(KERN_ERR "port_accept : failed to allocate " + "connection\n"); + goto out_close; + } + *conn = ((struct connection) + { .list = LIST_HEAD_INIT(conn->list), + .fd = fd, + .socket = { socket[0], socket[1] }, + .telnetd_pid = pid, + .port = port }); + + if(um_request_irq(TELNETD_IRQ, socket[0], IRQ_READ, pipe_interrupt, + SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, + "telnetd", conn)){ + printk(KERN_ERR "port_accept : failed to get IRQ for " + "telnetd\n"); + goto out_free; + } + + if(atomic_read(&port->wait_count) == 0){ + os_write_file(fd, NO_WAITER_MSG, sizeof(NO_WAITER_MSG)); + printk("No one waiting for port\n"); + } + list_add(&conn->list, &port->pending); + return(1); + + out_free: + kfree(conn); + out_close: + os_close_file(fd); + if(pid != -1) + os_kill_process(pid, 1); + out: + return(ret); +} + +DECLARE_MUTEX(ports_sem); +struct list_head ports = LIST_HEAD_INIT(ports); + +void port_work_proc(void *unused) +{ + struct port_list *port; + struct list_head *ele; + unsigned long flags; + + local_irq_save(flags); + list_for_each(ele, &ports){ + port = list_entry(ele, struct port_list, list); + if(!port->has_connection) + continue; + reactivate_fd(port->fd, ACCEPT_IRQ); + while(port_accept(port)) ; + port->has_connection = 0; + } + local_irq_restore(flags); +} + +DECLARE_WORK(port_work, port_work_proc, NULL); + +static irqreturn_t port_interrupt(int irq, void *data, struct pt_regs *regs) +{ + struct port_list *port = data; + + port->has_connection = 1; + schedule_work(&port_work); + return(IRQ_HANDLED); +} + +void *port_data(int port_num) +{ + struct list_head *ele; + struct port_list *port; + struct port_dev *dev = NULL; + int fd; + + down(&ports_sem); + list_for_each(ele, &ports){ + port = list_entry(ele, struct port_list, list); + if(port->port == port_num) goto found; + } + port = kmalloc(sizeof(struct port_list), GFP_KERNEL); + if(port == NULL){ + printk(KERN_ERR "Allocation of port list failed\n"); + goto out; + } + + fd = port_listen_fd(port_num); + if(fd < 0){ + printk(KERN_ERR "binding to port %d failed, errno = %d\n", + port_num, -fd); + goto out_free; + } + if(um_request_irq(ACCEPT_IRQ, fd, IRQ_READ, port_interrupt, + SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, "port", + port)){ + printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num); + goto out_close; + } + + *port = ((struct port_list) + { .list = LIST_HEAD_INIT(port->list), + .wait_count = ATOMIC_INIT(0), + .has_connection = 0, + .port = port_num, + .fd = fd, + .pending = LIST_HEAD_INIT(port->pending), + .connections = LIST_HEAD_INIT(port->connections) }); + spin_lock_init(&port->lock); + init_completion(&port->done); + list_add(&port->list, &ports); + + found: + dev = kmalloc(sizeof(struct port_dev), GFP_KERNEL); + if(dev == NULL){ + printk(KERN_ERR "Allocation of port device entry failed\n"); + goto out; + } + + *dev = ((struct port_dev) { .port = port, + .helper_pid = -1, + .telnetd_pid = -1 }); + goto out; + + out_free: + kfree(port); + out_close: + os_close_file(fd); + out: + up(&ports_sem); + return(dev); +} + +int port_wait(void *data) +{ + struct port_dev *dev = data; + struct connection *conn; + struct port_list *port = dev->port; + int fd; + + atomic_inc(&port->wait_count); + while(1){ + fd = -ERESTARTSYS; + if(wait_for_completion_interruptible(&port->done)) + goto out; + + spin_lock(&port->lock); + + conn = list_entry(port->connections.next, struct connection, + list); + list_del(&conn->list); + spin_unlock(&port->lock); + + os_shutdown_socket(conn->socket[0], 1, 1); + os_close_file(conn->socket[0]); + os_shutdown_socket(conn->socket[1], 1, 1); + os_close_file(conn->socket[1]); + + /* This is done here because freeing an IRQ can't be done + * within the IRQ handler. So, pipe_interrupt always ups + * the semaphore regardless of whether it got a successful + * connection. Then we loop here throwing out failed + * connections until a good one is found. + */ + free_irq_by_irq_and_dev(TELNETD_IRQ, conn); + free_irq(TELNETD_IRQ, conn); + + if(conn->fd >= 0) break; + os_close_file(conn->fd); + kfree(conn); + } + + fd = conn->fd; + dev->helper_pid = conn->helper_pid; + dev->telnetd_pid = conn->telnetd_pid; + kfree(conn); + out: + atomic_dec(&port->wait_count); + return fd; +} + +void port_remove_dev(void *d) +{ + struct port_dev *dev = d; + + if(dev->helper_pid != -1) + os_kill_process(dev->helper_pid, 0); + if(dev->telnetd_pid != -1) + os_kill_process(dev->telnetd_pid, 1); + dev->helper_pid = -1; + dev->telnetd_pid = -1; +} + +void port_kern_free(void *d) +{ + struct port_dev *dev = d; + + port_remove_dev(dev); + kfree(dev); +} + +static void free_port(void) +{ + struct list_head *ele; + struct port_list *port; + + list_for_each(ele, &ports){ + port = list_entry(ele, struct port_list, list); + free_irq_by_fd(port->fd); + os_close_file(port->fd); + } +} + +__uml_exitcall(free_port); diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c new file mode 100644 index 000000000000..14dd2002d2da --- /dev/null +++ b/arch/um/drivers/port_user.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "chan_user.h" +#include "port.h" +#include "helper.h" +#include "os.h" + +struct port_chan { + int raw; + struct termios tt; + void *kernel_data; + char dev[sizeof("32768\0")]; +}; + +static void *port_init(char *str, int device, struct chan_opts *opts) +{ + struct port_chan *data; + void *kern_data; + char *end; + int port; + + if(*str != ':'){ + printk("port_init : channel type 'port' must specify a " + "port number\n"); + return(NULL); + } + str++; + port = strtoul(str, &end, 0); + if((*end != '\0') || (end == str)){ + printk("port_init : couldn't parse port '%s'\n", str); + return(NULL); + } + + kern_data = port_data(port); + if(kern_data == NULL) + return(NULL); + + data = um_kmalloc(sizeof(*data)); + if(data == NULL) + goto err; + + *data = ((struct port_chan) { .raw = opts->raw, + .kernel_data = kern_data }); + sprintf(data->dev, "%d", port); + + return(data); + err: + port_kern_free(kern_data); + return(NULL); +} + +static void port_free(void *d) +{ + struct port_chan *data = d; + + port_kern_free(data->kernel_data); + kfree(data); +} + +static int port_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct port_chan *data = d; + int fd, err; + + fd = port_wait(data->kernel_data); + if((fd >= 0) && data->raw){ + CATCH_EINTR(err = tcgetattr(fd, &data->tt)); + if(err) + return(err); + + err = raw(fd); + if(err) + return(err); + } + *dev_out = data->dev; + return(fd); +} + +static void port_close(int fd, void *d) +{ + struct port_chan *data = d; + + port_remove_dev(data->kernel_data); + os_close_file(fd); +} + +static int port_console_write(int fd, const char *buf, int n, void *d) +{ + struct port_chan *data = d; + + return(generic_console_write(fd, buf, n, &data->tt)); +} + +struct chan_ops port_ops = { + .type = "port", + .init = port_init, + .open = port_open, + .close = port_close, + .read = generic_read, + .write = generic_write, + .console_write = port_console_write, + .window_size = generic_window_size, + .free = port_free, + .winch = 1, +}; + +int port_listen_fd(int port) +{ + struct sockaddr_in addr; + int fd, err, arg; + + fd = socket(PF_INET, SOCK_STREAM, 0); + if(fd == -1) + return(-errno); + + arg = 1; + if(setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &arg, sizeof(arg)) < 0){ + err = -errno; + goto out; + } + + addr.sin_family = AF_INET; + addr.sin_port = htons(port); + addr.sin_addr.s_addr = htonl(INADDR_ANY); + if(bind(fd, (struct sockaddr *) &addr, sizeof(addr)) < 0){ + err = -errno; + goto out; + } + + if(listen(fd, 1) < 0){ + err = -errno; + goto out; + } + + err = os_set_fd_block(fd, 0); + if(err < 0) + goto out; + + return(fd); + out: + os_close_file(fd); + return(err); +} + +struct port_pre_exec_data { + int sock_fd; + int pipe_fd; +}; + +void port_pre_exec(void *arg) +{ + struct port_pre_exec_data *data = arg; + + dup2(data->sock_fd, 0); + dup2(data->sock_fd, 1); + dup2(data->sock_fd, 2); + os_close_file(data->sock_fd); + dup2(data->pipe_fd, 3); + os_shutdown_socket(3, 1, 0); + os_close_file(data->pipe_fd); +} + +int port_connection(int fd, int *socket, int *pid_out) +{ + int new, err; + char *argv[] = { "/usr/sbin/in.telnetd", "-L", + "/usr/lib/uml/port-helper", NULL }; + struct port_pre_exec_data data; + + new = os_accept_connection(fd); + if(new < 0) + return(new); + + err = os_pipe(socket, 0, 0); + if(err < 0) + goto out_close; + + data = ((struct port_pre_exec_data) + { .sock_fd = new, + .pipe_fd = socket[1] }); + + err = run_helper(port_pre_exec, &data, argv, NULL); + if(err < 0) + goto out_shutdown; + + *pid_out = err; + return(new); + + out_shutdown: + os_shutdown_socket(socket[0], 1, 1); + os_close_file(socket[0]); + os_shutdown_socket(socket[1], 1, 1); + os_close_file(socket[1]); + out_close: + os_close_file(new); + return(err); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c new file mode 100644 index 000000000000..ed84d01df6cc --- /dev/null +++ b/arch/um/drivers/pty.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include "chan_user.h" +#include "user.h" +#include "user_util.h" +#include "kern_util.h" +#include "os.h" + +struct pty_chan { + void (*announce)(char *dev_name, int dev); + int dev; + int raw; + struct termios tt; + char dev_name[sizeof("/dev/pts/0123456\0")]; +}; + +static void *pty_chan_init(char *str, int device, struct chan_opts *opts) +{ + struct pty_chan *data; + + data = um_kmalloc(sizeof(*data)); + if(data == NULL) return(NULL); + *data = ((struct pty_chan) { .announce = opts->announce, + .dev = device, + .raw = opts->raw }); + return(data); +} + +static int pts_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct pty_chan *data = d; + char *dev; + int fd, err; + + fd = get_pty(); + if(fd < 0){ + printk("open_pts : Failed to open pts\n"); + return(-errno); + } + if(data->raw){ + CATCH_EINTR(err = tcgetattr(fd, &data->tt)); + if(err) + return(err); + + err = raw(fd); + if(err) + return(err); + } + + dev = ptsname(fd); + sprintf(data->dev_name, "%s", dev); + *dev_out = data->dev_name; + if (data->announce) + (*data->announce)(dev, data->dev); + return(fd); +} + +static int getmaster(char *line) +{ + char *pty, *bank, *cp; + int master, err; + + pty = &line[strlen("/dev/ptyp")]; + for (bank = "pqrs"; *bank; bank++) { + line[strlen("/dev/pty")] = *bank; + *pty = '0'; + if (os_stat_file(line, NULL) < 0) + break; + for (cp = "0123456789abcdef"; *cp; cp++) { + *pty = *cp; + master = os_open_file(line, of_rdwr(OPENFLAGS()), 0); + if (master >= 0) { + char *tp = &line[strlen("/dev/")]; + + /* verify slave side is usable */ + *tp = 't'; + err = os_access(line, OS_ACC_RW_OK); + *tp = 'p'; + if(err == 0) return(master); + (void) os_close_file(master); + } + } + } + return(-1); +} + +static int pty_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct pty_chan *data = d; + int fd, err; + char dev[sizeof("/dev/ptyxx\0")] = "/dev/ptyxx"; + + fd = getmaster(dev); + if(fd < 0) + return(-errno); + + if(data->raw){ + err = raw(fd); + if(err) + return(err); + } + + if(data->announce) (*data->announce)(dev, data->dev); + + sprintf(data->dev_name, "%s", dev); + *dev_out = data->dev_name; + return(fd); +} + +static int pty_console_write(int fd, const char *buf, int n, void *d) +{ + struct pty_chan *data = d; + + return(generic_console_write(fd, buf, n, &data->tt)); +} + +struct chan_ops pty_ops = { + .type = "pty", + .init = pty_chan_init, + .open = pty_open, + .close = generic_close, + .read = generic_read, + .write = generic_write, + .console_write = pty_console_write, + .window_size = generic_window_size, + .free = generic_free, + .winch = 0, +}; + +struct chan_ops pts_ops = { + .type = "pts", + .init = pty_chan_init, + .open = pts_open, + .close = generic_close, + .read = generic_read, + .write = generic_write, + .console_write = pty_console_write, + .window_size = generic_window_size, + .free = generic_free, + .winch = 0, +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c new file mode 100644 index 000000000000..d43e9fab05a7 --- /dev/null +++ b/arch/um/drivers/random.c @@ -0,0 +1,122 @@ +/* Much of this ripped from hw_random.c */ + +#include +#include +#include +#include +#include +#include "os.h" + +/* + * core module and version information + */ +#define RNG_VERSION "1.0.0" +#define RNG_MODULE_NAME "random" +#define RNG_DRIVER_NAME RNG_MODULE_NAME " virtual driver " RNG_VERSION +#define PFX RNG_MODULE_NAME ": " + +#define RNG_MISCDEV_MINOR 183 /* official */ + +static int random_fd = -1; + +static int rng_dev_open (struct inode *inode, struct file *filp) +{ + /* enforce read-only access to this chrdev */ + if ((filp->f_mode & FMODE_READ) == 0) + return -EINVAL; + if (filp->f_mode & FMODE_WRITE) + return -EINVAL; + + return 0; +} + +static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size, + loff_t * offp) +{ + u32 data; + int n, ret = 0, have_data; + + while(size){ + n = os_read_file(random_fd, &data, sizeof(data)); + if(n > 0){ + have_data = n; + while (have_data && size) { + if (put_user((u8)data, buf++)) { + ret = ret ? : -EFAULT; + break; + } + size--; + ret++; + have_data--; + data>>=8; + } + } + else if(n == -EAGAIN){ + if (filp->f_flags & O_NONBLOCK) + return ret ? : -EAGAIN; + + if(need_resched()){ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(1); + } + } + else return n; + if (signal_pending (current)) + return ret ? : -ERESTARTSYS; + } + return ret; +} + +static struct file_operations rng_chrdev_ops = { + .owner = THIS_MODULE, + .open = rng_dev_open, + .read = rng_dev_read, +}; + +static struct miscdevice rng_miscdev = { + RNG_MISCDEV_MINOR, + RNG_MODULE_NAME, + &rng_chrdev_ops, +}; + +/* + * rng_init - initialize RNG module + */ +static int __init rng_init (void) +{ + int err; + + err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0); + if(err < 0) + goto out; + + random_fd = err; + + err = os_set_fd_block(random_fd, 0); + if(err) + goto err_out_cleanup_hw; + + err = misc_register (&rng_miscdev); + if (err) { + printk (KERN_ERR PFX "misc device register failed\n"); + goto err_out_cleanup_hw; + } + + out: + return err; + + err_out_cleanup_hw: + random_fd = -1; + goto out; +} + +/* + * rng_cleanup - shutdown RNG module + */ +static void __exit rng_cleanup (void) +{ + misc_deregister (&rng_miscdev); +} + +module_init (rng_init); +module_exit (rng_cleanup); diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h new file mode 100644 index 000000000000..495f2f1b1420 --- /dev/null +++ b/arch/um/drivers/slip.h @@ -0,0 +1,39 @@ +#ifndef __UM_SLIP_H +#define __UM_SLIP_H + +#define BUF_SIZE 1500 + /* two bytes each for a (pathological) max packet of escaped chars + * + * terminating END char + initial END char */ +#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) + +struct slip_data { + void *dev; + char name[sizeof("slnnnnn\0")]; + char *addr; + char *gate_addr; + int slave; + char ibuf[ENC_BUF_SIZE]; + char obuf[ENC_BUF_SIZE]; + int more; /* more data: do not read fd until ibuf has been drained */ + int pos; + int esc; +}; + +extern struct net_user_info slip_user_info; + +extern int set_umn_addr(int fd, char *addr, char *ptp_addr); +extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri); +extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri); + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c new file mode 100644 index 000000000000..0886eedba213 --- /dev/null +++ b/arch/um/drivers/slip_kern.c @@ -0,0 +1,109 @@ +#include "linux/config.h" +#include "linux/kernel.h" +#include "linux/stddef.h" +#include "linux/init.h" +#include "linux/netdevice.h" +#include "linux/if_arp.h" +#include "net_kern.h" +#include "net_user.h" +#include "kern.h" +#include "slip.h" + +struct slip_init { + char *gate_addr; +}; + +void slip_init(struct net_device *dev, void *data) +{ + struct uml_net_private *private; + struct slip_data *spri; + struct slip_init *init = data; + + private = dev->priv; + spri = (struct slip_data *) private->user; + *spri = ((struct slip_data) + { .name = { '\0' }, + .addr = NULL, + .gate_addr = init->gate_addr, + .slave = -1, + .ibuf = { '\0' }, + .obuf = { '\0' }, + .pos = 0, + .esc = 0, + .dev = dev }); + + dev->init = NULL; + dev->hard_header_len = 0; + dev->addr_len = 4; + dev->type = ARPHRD_ETHER; + dev->tx_queue_len = 256; + dev->flags = IFF_NOARP; + printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr); +} + +static unsigned short slip_protocol(struct sk_buff *skbuff) +{ + return(htons(ETH_P_IP)); +} + +static int slip_read(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return(slip_user_read(fd, (*skb)->mac.raw, (*skb)->dev->mtu, + (struct slip_data *) &lp->user)); +} + +static int slip_write(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return(slip_user_write(fd, (*skb)->data, (*skb)->len, + (struct slip_data *) &lp->user)); +} + +struct net_kern_info slip_kern_info = { + .init = slip_init, + .protocol = slip_protocol, + .read = slip_read, + .write = slip_write, +}; + +static int slip_setup(char *str, char **mac_out, void *data) +{ + struct slip_init *init = data; + + *init = ((struct slip_init) + { .gate_addr = NULL }); + + if(str[0] != '\0') + init->gate_addr = str; + return(1); +} + +static struct transport slip_transport = { + .list = LIST_HEAD_INIT(slip_transport.list), + .name = "slip", + .setup = slip_setup, + .user = &slip_user_info, + .kern = &slip_kern_info, + .private_size = sizeof(struct slip_data), + .setup_size = sizeof(struct slip_init), +}; + +static int register_slip(void) +{ + register_transport(&slip_transport); + return(1); +} + +__initcall(register_slip); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_proto.h new file mode 100644 index 000000000000..7206361ace45 --- /dev/null +++ b/arch/um/drivers/slip_proto.h @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __UM_SLIP_PROTO_H__ +#define __UM_SLIP_PROTO_H__ + +/* SLIP protocol characters. */ +#define SLIP_END 0300 /* indicates end of frame */ +#define SLIP_ESC 0333 /* indicates byte stuffing */ +#define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */ +#define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */ + +static inline int slip_unesc(unsigned char c,char *buf,int *pos, int *esc) +{ + int ret; + + switch(c){ + case SLIP_END: + *esc = 0; + ret=*pos; + *pos=0; + return(ret); + case SLIP_ESC: + *esc = 1; + return(0); + case SLIP_ESC_ESC: + if(*esc){ + *esc = 0; + c = SLIP_ESC; + } + break; + case SLIP_ESC_END: + if(*esc){ + *esc = 0; + c = SLIP_END; + } + break; + } + buf[(*pos)++] = c; + return(0); +} + +static inline int slip_esc(unsigned char *s, unsigned char *d, int len) +{ + unsigned char *ptr = d; + unsigned char c; + + /* + * Send an initial END character to flush out any + * data that may have accumulated in the receiver + * due to line noise. + */ + + *ptr++ = SLIP_END; + + /* + * For each byte in the packet, send the appropriate + * character sequence, according to the SLIP protocol. + */ + + while (len-- > 0) { + switch(c = *s++) { + case SLIP_END: + *ptr++ = SLIP_ESC; + *ptr++ = SLIP_ESC_END; + break; + case SLIP_ESC: + *ptr++ = SLIP_ESC; + *ptr++ = SLIP_ESC_ESC; + break; + default: + *ptr++ = c; + break; + } + } + *ptr++ = SLIP_END; + return (ptr - d); +} + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c new file mode 100644 index 000000000000..d94846b1b4cf --- /dev/null +++ b/arch/um/drivers/slip_user.c @@ -0,0 +1,280 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "net_user.h" +#include "slip.h" +#include "slip_proto.h" +#include "helper.h" +#include "os.h" + +void slip_user_init(void *data, void *dev) +{ + struct slip_data *pri = data; + + pri->dev = dev; +} + +static int set_up_tty(int fd) +{ + int i; + struct termios tios; + + if (tcgetattr(fd, &tios) < 0) { + printk("could not get initial terminal attributes\n"); + return(-1); + } + + tios.c_cflag = CS8 | CREAD | HUPCL | CLOCAL; + tios.c_iflag = IGNBRK | IGNPAR; + tios.c_oflag = 0; + tios.c_lflag = 0; + for (i = 0; i < NCCS; i++) + tios.c_cc[i] = 0; + tios.c_cc[VMIN] = 1; + tios.c_cc[VTIME] = 0; + + cfsetospeed(&tios, B38400); + cfsetispeed(&tios, B38400); + + if (tcsetattr(fd, TCSAFLUSH, &tios) < 0) { + printk("failed to set terminal attributes\n"); + return(-1); + } + return(0); +} + +struct slip_pre_exec_data { + int stdin; + int stdout; + int close_me; +}; + +static void slip_pre_exec(void *arg) +{ + struct slip_pre_exec_data *data = arg; + + if(data->stdin >= 0) dup2(data->stdin, 0); + dup2(data->stdout, 1); + if(data->close_me >= 0) os_close_file(data->close_me); +} + +static int slip_tramp(char **argv, int fd) +{ + struct slip_pre_exec_data pe_data; + char *output; + int status, pid, fds[2], err, output_len; + + err = os_pipe(fds, 1, 0); + if(err < 0){ + printk("slip_tramp : pipe failed, err = %d\n", -err); + return(err); + } + + err = 0; + pe_data.stdin = fd; + pe_data.stdout = fds[1]; + pe_data.close_me = fds[0]; + pid = run_helper(slip_pre_exec, &pe_data, argv, NULL); + + if(pid < 0) err = pid; + else { + output_len = page_size(); + output = um_kmalloc(output_len); + if(output == NULL) + printk("slip_tramp : failed to allocate output " + "buffer\n"); + + os_close_file(fds[1]); + read_output(fds[0], output, output_len); + if(output != NULL){ + printk("%s", output); + kfree(output); + } + CATCH_EINTR(err = waitpid(pid, &status, 0)); + if(err < 0) + err = errno; + else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){ + printk("'%s' didn't exit with status 0\n", argv[0]); + err = -EINVAL; + } + } + + os_close_file(fds[0]); + + return(err); +} + +static int slip_open(void *data) +{ + struct slip_data *pri = data; + char version_buf[sizeof("nnnnn\0")]; + char gate_buf[sizeof("nnn.nnn.nnn.nnn\0")]; + char *argv[] = { "uml_net", version_buf, "slip", "up", gate_buf, + NULL }; + int sfd, mfd, err; + + mfd = get_pty(); + if(mfd < 0){ + printk("umn : Failed to open pty, err = %d\n", -mfd); + return(mfd); + } + sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0); + if(sfd < 0){ + printk("Couldn't open tty for slip line, err = %d\n", -sfd); + os_close_file(mfd); + return(sfd); + } + if(set_up_tty(sfd)) return(-1); + pri->slave = sfd; + pri->pos = 0; + pri->esc = 0; + if(pri->gate_addr != NULL){ + sprintf(version_buf, "%d", UML_NET_VERSION); + strcpy(gate_buf, pri->gate_addr); + + err = slip_tramp(argv, sfd); + + if(err < 0){ + printk("slip_tramp failed - err = %d\n", -err); + return(err); + } + err = os_get_ifname(pri->slave, pri->name); + if(err < 0){ + printk("get_ifname failed, err = %d\n", -err); + return(err); + } + iter_addresses(pri->dev, open_addr, pri->name); + } + else { + err = os_set_slip(sfd); + if(err < 0){ + printk("Failed to set slip discipline encapsulation - " + "err = %d\n", -err); + return(err); + } + } + return(mfd); +} + +static void slip_close(int fd, void *data) +{ + struct slip_data *pri = data; + char version_buf[sizeof("nnnnn\0")]; + char *argv[] = { "uml_net", version_buf, "slip", "down", pri->name, + NULL }; + int err; + + if(pri->gate_addr != NULL) + iter_addresses(pri->dev, close_addr, pri->name); + + sprintf(version_buf, "%d", UML_NET_VERSION); + + err = slip_tramp(argv, pri->slave); + + if(err != 0) + printk("slip_tramp failed - errno = %d\n", -err); + os_close_file(fd); + os_close_file(pri->slave); + pri->slave = -1; +} + +int slip_user_read(int fd, void *buf, int len, struct slip_data *pri) +{ + int i, n, size, start; + + if(pri->more>0) { + i = 0; + while(i < pri->more) { + size = slip_unesc(pri->ibuf[i++], + pri->ibuf, &pri->pos, &pri->esc); + if(size){ + memcpy(buf, pri->ibuf, size); + memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); + pri->more=pri->more-i; + return(size); + } + } + pri->more=0; + } + + n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); + if(n <= 0) return(n); + + start = pri->pos; + for(i = 0; i < n; i++){ + size = slip_unesc(pri->ibuf[start + i], + pri->ibuf, &pri->pos, &pri->esc); + if(size){ + memcpy(buf, pri->ibuf, size); + memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); + pri->more=n-(i+1); + return(size); + } + } + return(0); +} + +int slip_user_write(int fd, void *buf, int len, struct slip_data *pri) +{ + int actual, n; + + actual = slip_esc(buf, pri->obuf, len); + n = net_write(fd, pri->obuf, actual); + if(n < 0) return(n); + else return(len); +} + +static int slip_set_mtu(int mtu, void *data) +{ + return(mtu); +} + +static void slip_add_addr(unsigned char *addr, unsigned char *netmask, + void *data) +{ + struct slip_data *pri = data; + + if(pri->slave < 0) return; + open_addr(addr, netmask, pri->name); +} + +static void slip_del_addr(unsigned char *addr, unsigned char *netmask, + void *data) +{ + struct slip_data *pri = data; + + if(pri->slave < 0) return; + close_addr(addr, netmask, pri->name); +} + +struct net_user_info slip_user_info = { + .init = slip_user_init, + .open = slip_open, + .close = slip_close, + .remove = NULL, + .set_mtu = slip_set_mtu, + .add_address = slip_add_addr, + .delete_address = slip_del_addr, + .max_packet = BUF_SIZE +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h new file mode 100644 index 000000000000..04e407d1e44a --- /dev/null +++ b/arch/um/drivers/slirp.h @@ -0,0 +1,51 @@ +#ifndef __UM_SLIRP_H +#define __UM_SLIRP_H + +#define BUF_SIZE 1500 + /* two bytes each for a (pathological) max packet of escaped chars + * + * terminating END char + initial END char */ +#define ENC_BUF_SIZE (2 * BUF_SIZE + 2) + +#define SLIRP_MAX_ARGS 100 +/* + * XXX this next definition is here because I don't understand why this + * initializer doesn't work in slirp_kern.c: + * + * argv : { init->argv[ 0 ... SLIRP_MAX_ARGS-1 ] }, + * + * or why I can't typecast like this: + * + * argv : (char* [SLIRP_MAX_ARGS])(init->argv), + */ +struct arg_list_dummy_wrapper { char *argv[SLIRP_MAX_ARGS]; }; + +struct slirp_data { + void *dev; + struct arg_list_dummy_wrapper argw; + int pid; + int slave; + char ibuf[ENC_BUF_SIZE]; + char obuf[ENC_BUF_SIZE]; + int more; /* more data: do not read fd until ibuf has been drained */ + int pos; + int esc; +}; + +extern struct net_user_info slirp_user_info; + +extern int set_umn_addr(int fd, char *addr, char *ptp_addr); +extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri); +extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri); + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c new file mode 100644 index 000000000000..c9d6b52a831d --- /dev/null +++ b/arch/um/drivers/slirp_kern.c @@ -0,0 +1,135 @@ +#include "linux/kernel.h" +#include "linux/stddef.h" +#include "linux/init.h" +#include "linux/netdevice.h" +#include "linux/if_arp.h" +#include "net_kern.h" +#include "net_user.h" +#include "kern.h" +#include "slirp.h" + +struct slirp_init { + struct arg_list_dummy_wrapper argw; /* XXX should be simpler... */ +}; + +void slirp_init(struct net_device *dev, void *data) +{ + struct uml_net_private *private; + struct slirp_data *spri; + struct slirp_init *init = data; + int i; + + private = dev->priv; + spri = (struct slirp_data *) private->user; + *spri = ((struct slirp_data) + { .argw = init->argw, + .pid = -1, + .slave = -1, + .ibuf = { '\0' }, + .obuf = { '\0' }, + .pos = 0, + .esc = 0, + .dev = dev }); + + dev->init = NULL; + dev->hard_header_len = 0; + dev->header_cache_update = NULL; + dev->hard_header_cache = NULL; + dev->hard_header = NULL; + dev->addr_len = 0; + dev->type = ARPHRD_SLIP; + dev->tx_queue_len = 256; + dev->flags = IFF_NOARP; + printk("SLIRP backend - command line:"); + for(i=0;spri->argw.argv[i]!=NULL;i++) { + printk(" '%s'",spri->argw.argv[i]); + } + printk("\n"); +} + +static unsigned short slirp_protocol(struct sk_buff *skbuff) +{ + return(htons(ETH_P_IP)); +} + +static int slirp_read(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return(slirp_user_read(fd, (*skb)->mac.raw, (*skb)->dev->mtu, + (struct slirp_data *) &lp->user)); +} + +static int slirp_write(int fd, struct sk_buff **skb, + struct uml_net_private *lp) +{ + return(slirp_user_write(fd, (*skb)->data, (*skb)->len, + (struct slirp_data *) &lp->user)); +} + +struct net_kern_info slirp_kern_info = { + .init = slirp_init, + .protocol = slirp_protocol, + .read = slirp_read, + .write = slirp_write, +}; + +static int slirp_setup(char *str, char **mac_out, void *data) +{ + struct slirp_init *init = data; + int i=0; + + *init = ((struct slirp_init) + { argw : { { "slirp", NULL } } }); + + str = split_if_spec(str, mac_out, NULL); + + if(str == NULL) { /* no command line given after MAC addr */ + return(1); + } + + do { + if(i>=SLIRP_MAX_ARGS-1) { + printk("slirp_setup: truncating slirp arguments\n"); + break; + } + init->argw.argv[i++] = str; + while(*str && *str!=',') { + if(*str=='_') *str=' '; + str++; + } + if(*str!=',') + break; + *str++='\0'; + } while(1); + init->argw.argv[i]=NULL; + return(1); +} + +static struct transport slirp_transport = { + .list = LIST_HEAD_INIT(slirp_transport.list), + .name = "slirp", + .setup = slirp_setup, + .user = &slirp_user_info, + .kern = &slirp_kern_info, + .private_size = sizeof(struct slirp_data), + .setup_size = sizeof(struct slirp_init), +}; + +static int register_slirp(void) +{ + register_transport(&slirp_transport); + return(1); +} + +__initcall(register_slirp); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c new file mode 100644 index 000000000000..c322515c71cc --- /dev/null +++ b/arch/um/drivers/slirp_user.c @@ -0,0 +1,201 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "net_user.h" +#include "slirp.h" +#include "slip_proto.h" +#include "helper.h" +#include "os.h" + +void slirp_user_init(void *data, void *dev) +{ + struct slirp_data *pri = data; + + pri->dev = dev; +} + +struct slirp_pre_exec_data { + int stdin; + int stdout; +}; + +static void slirp_pre_exec(void *arg) +{ + struct slirp_pre_exec_data *data = arg; + + if(data->stdin != -1) dup2(data->stdin, 0); + if(data->stdout != -1) dup2(data->stdout, 1); +} + +static int slirp_tramp(char **argv, int fd) +{ + struct slirp_pre_exec_data pe_data; + int pid; + + pe_data.stdin = fd; + pe_data.stdout = fd; + pid = run_helper(slirp_pre_exec, &pe_data, argv, NULL); + + return(pid); +} + +/* XXX This is just a trivial wrapper around os_pipe */ +static int slirp_datachan(int *mfd, int *sfd) +{ + int fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err < 0){ + printk("slirp_datachan: Failed to open pipe, err = %d\n", -err); + return(err); + } + + *mfd = fds[0]; + *sfd = fds[1]; + return(0); +} + +static int slirp_open(void *data) +{ + struct slirp_data *pri = data; + int sfd, mfd, pid, err; + + err = slirp_datachan(&mfd, &sfd); + if(err) + return(err); + + pid = slirp_tramp(pri->argw.argv, sfd); + + if(pid < 0){ + printk("slirp_tramp failed - errno = %d\n", -pid); + os_close_file(sfd); + os_close_file(mfd); + return(pid); + } + + pri->slave = sfd; + pri->pos = 0; + pri->esc = 0; + + pri->pid = pid; + + return(mfd); +} + +static void slirp_close(int fd, void *data) +{ + struct slirp_data *pri = data; + int status,err; + + os_close_file(fd); + os_close_file(pri->slave); + + pri->slave = -1; + + if(pri->pid<1) { + printk("slirp_close: no child process to shut down\n"); + return; + } + +#if 0 + if(kill(pri->pid, SIGHUP)<0) { + printk("slirp_close: sending hangup to %d failed (%d)\n", + pri->pid, errno); + } +#endif + + CATCH_EINTR(err = waitpid(pri->pid, &status, WNOHANG)); + if(err < 0) { + printk("slirp_close: waitpid returned %d\n", errno); + return; + } + + if(err == 0) { + printk("slirp_close: process %d has not exited\n"); + return; + } + + pri->pid = -1; +} + +int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri) +{ + int i, n, size, start; + + if(pri->more>0) { + i = 0; + while(i < pri->more) { + size = slip_unesc(pri->ibuf[i++], + pri->ibuf,&pri->pos,&pri->esc); + if(size){ + memcpy(buf, pri->ibuf, size); + memmove(pri->ibuf, &pri->ibuf[i], pri->more-i); + pri->more=pri->more-i; + return(size); + } + } + pri->more=0; + } + + n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos); + if(n <= 0) return(n); + + start = pri->pos; + for(i = 0; i < n; i++){ + size = slip_unesc(pri->ibuf[start + i], + pri->ibuf,&pri->pos,&pri->esc); + if(size){ + memcpy(buf, pri->ibuf, size); + memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1)); + pri->more=n-(i+1); + return(size); + } + } + return(0); +} + +int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri) +{ + int actual, n; + + actual = slip_esc(buf, pri->obuf, len); + n = net_write(fd, pri->obuf, actual); + if(n < 0) return(n); + else return(len); +} + +static int slirp_set_mtu(int mtu, void *data) +{ + return(mtu); +} + +struct net_user_info slirp_user_info = { + .init = slirp_user_init, + .open = slirp_open, + .close = slirp_close, + .remove = NULL, + .set_mtu = slirp_set_mtu, + .add_address = NULL, + .delete_address = NULL, + .max_packet = BUF_SIZE +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c new file mode 100644 index 000000000000..c5839c3141f8 --- /dev/null +++ b/arch/um/drivers/ssl.c @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2000, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/config.h" +#include "linux/fs.h" +#include "linux/tty.h" +#include "linux/tty_driver.h" +#include "linux/major.h" +#include "linux/mm.h" +#include "linux/init.h" +#include "linux/console.h" +#include "asm/termbits.h" +#include "asm/irq.h" +#include "line.h" +#include "ssl.h" +#include "chan_kern.h" +#include "user_util.h" +#include "kern_util.h" +#include "kern.h" +#include "init.h" +#include "irq_user.h" +#include "mconsole_kern.h" +#include "2_5compat.h" + +static int ssl_version = 1; + +/* Referenced only by tty_driver below - presumably it's locked correctly + * by the tty driver. + */ + +static struct tty_driver *ssl_driver; + +#define NR_PORTS 64 + +void ssl_announce(char *dev_name, int dev) +{ + printk(KERN_INFO "Serial line %d assigned device '%s'\n", dev, + dev_name); +} + +static struct chan_opts opts = { + .announce = ssl_announce, + .xterm_title = "Serial Line #%d", + .raw = 1, + .tramp_stack = 0, + .in_kernel = 1, +}; + +static int ssl_config(char *str); +static int ssl_get_config(char *dev, char *str, int size, char **error_out); +static int ssl_remove(char *str); + +static struct line_driver driver = { + .name = "UML serial line", + .device_name = "ttyS", + .devfs_name = "tts/", + .major = TTY_MAJOR, + .minor_start = 64, + .type = TTY_DRIVER_TYPE_SERIAL, + .subtype = 0, + .read_irq = SSL_IRQ, + .read_irq_name = "ssl", + .write_irq = SSL_WRITE_IRQ, + .write_irq_name = "ssl-write", + .symlink_from = "serial", + .symlink_to = "tts", + .mc = { + .name = "ssl", + .config = ssl_config, + .get_config = ssl_get_config, + .remove = ssl_remove, + }, +}; + +/* The array is initialized by line_init, which is an initcall. The + * individual elements are protected by individual semaphores. + */ +static struct line serial_lines[NR_PORTS] = + { [0 ... NR_PORTS - 1] = LINE_INIT(CONFIG_SSL_CHAN, &driver) }; + +static struct lines lines = LINES_INIT(NR_PORTS); + +static int ssl_config(char *str) +{ + return(line_config(serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0]), str)); +} + +static int ssl_get_config(char *dev, char *str, int size, char **error_out) +{ + return(line_get_config(dev, serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0]), + str, size, error_out)); +} + +static int ssl_remove(char *str) +{ + return(line_remove(serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0]), str)); +} + +int ssl_open(struct tty_struct *tty, struct file *filp) +{ + return line_open(serial_lines, tty, &opts); +} + +#if 0 +static int ssl_chars_in_buffer(struct tty_struct *tty) +{ + return(0); +} + +static void ssl_flush_buffer(struct tty_struct *tty) +{ + return; +} + +static void ssl_throttle(struct tty_struct * tty) +{ + printk(KERN_ERR "Someone should implement ssl_throttle\n"); +} + +static void ssl_unthrottle(struct tty_struct * tty) +{ + printk(KERN_ERR "Someone should implement ssl_unthrottle\n"); +} + +static void ssl_stop(struct tty_struct *tty) +{ + printk(KERN_ERR "Someone should implement ssl_stop\n"); +} + +static void ssl_start(struct tty_struct *tty) +{ + printk(KERN_ERR "Someone should implement ssl_start\n"); +} + +void ssl_hangup(struct tty_struct *tty) +{ +} +#endif + +static struct tty_operations ssl_ops = { + .open = ssl_open, + .close = line_close, + .write = line_write, + .put_char = line_put_char, + .write_room = line_write_room, + .chars_in_buffer = line_chars_in_buffer, + .set_termios = line_set_termios, + .ioctl = line_ioctl, +#if 0 + .flush_chars = ssl_flush_chars, + .flush_buffer = ssl_flush_buffer, + .throttle = ssl_throttle, + .unthrottle = ssl_unthrottle, + .stop = ssl_stop, + .start = ssl_start, + .hangup = ssl_hangup, +#endif +}; + +/* Changed by ssl_init and referenced by ssl_exit, which are both serialized + * by being an initcall and exitcall, respectively. + */ +static int ssl_init_done = 0; + +static void ssl_console_write(struct console *c, const char *string, + unsigned len) +{ + struct line *line = &serial_lines[c->index]; + + down(&line->sem); + console_write_chan(&line->chan_list, string, len); + up(&line->sem); +} + +static struct tty_driver *ssl_console_device(struct console *c, int *index) +{ + *index = c->index; + return ssl_driver; +} + +static int ssl_console_setup(struct console *co, char *options) +{ + struct line *line = &serial_lines[co->index]; + + return console_open_chan(line,co,&opts); +} + +static struct console ssl_cons = { + .name = "ttyS", + .write = ssl_console_write, + .device = ssl_console_device, + .setup = ssl_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +int ssl_init(void) +{ + char *new_title; + + printk(KERN_INFO "Initializing software serial port version %d\n", + ssl_version); + ssl_driver = line_register_devfs(&lines, &driver, &ssl_ops, + serial_lines, ARRAY_SIZE(serial_lines)); + + lines_init(serial_lines, sizeof(serial_lines)/sizeof(serial_lines[0])); + + new_title = add_xterm_umid(opts.xterm_title); + if (new_title != NULL) + opts.xterm_title = new_title; + + ssl_init_done = 1; + register_console(&ssl_cons); + return(0); +} +late_initcall(ssl_init); + +static void ssl_exit(void) +{ + if (!ssl_init_done) + return; + close_lines(serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0])); +} +__uml_exitcall(ssl_exit); + +static int ssl_chan_setup(char *str) +{ + return(line_setup(serial_lines, + sizeof(serial_lines)/sizeof(serial_lines[0]), + str, 1)); +} + +__setup("ssl", ssl_chan_setup); +__channel_help(ssl_chan_setup, "ssl"); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ssl.h b/arch/um/drivers/ssl.h new file mode 100644 index 000000000000..98412aa66607 --- /dev/null +++ b/arch/um/drivers/ssl.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __SSL_H__ +#define __SSL_H__ + +extern int ssl_read(int fd, int line); +extern void ssl_receive_char(int line, char ch); + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c new file mode 100644 index 000000000000..98565b53d170 --- /dev/null +++ b/arch/um/drivers/stderr_console.c @@ -0,0 +1,45 @@ +#include +#include + +#include "chan_user.h" + +/* ----------------------------------------------------------------------------- */ +/* trivial console driver -- simply dump everything to stderr */ + +/* + * Don't register by default -- as this registeres very early in the + * boot process it becomes the default console. And as this isn't a + * real tty driver init isn't able to open /dev/console then. + * + * In most cases this isn't what you want ... + */ +static int use_stderr_console = 0; + +static void stderr_console_write(struct console *console, const char *string, + unsigned len) +{ + generic_write(2 /* stderr */, string, len, NULL); +} + +static struct console stderr_console = { + .name "stderr", + .write stderr_console_write, + .flags CON_PRINTBUFFER, +}; + +static int __init stderr_console_init(void) +{ + if (use_stderr_console) + register_console(&stderr_console); + return 0; +} +console_initcall(stderr_console_init); + +static int stderr_setup(char *str) +{ + if (!str) + return 0; + use_stderr_console = simple_strtoul(str,&str,0); + return 1; +} +__setup("stderr=", stderr_setup); diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c new file mode 100644 index 000000000000..e604d7c87695 --- /dev/null +++ b/arch/um/drivers/stdio_console.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/config.h" +#include "linux/posix_types.h" +#include "linux/tty.h" +#include "linux/tty_flip.h" +#include "linux/types.h" +#include "linux/major.h" +#include "linux/kdev_t.h" +#include "linux/console.h" +#include "linux/string.h" +#include "linux/sched.h" +#include "linux/list.h" +#include "linux/init.h" +#include "linux/interrupt.h" +#include "linux/slab.h" +#include "linux/hardirq.h" +#include "asm/current.h" +#include "asm/irq.h" +#include "stdio_console.h" +#include "line.h" +#include "chan_kern.h" +#include "user_util.h" +#include "kern_util.h" +#include "irq_user.h" +#include "mconsole_kern.h" +#include "init.h" +#include "2_5compat.h" + +#define MAX_TTYS (16) + +/* ----------------------------------------------------------------------------- */ + +/* Referenced only by tty_driver below - presumably it's locked correctly + * by the tty driver. + */ + +static struct tty_driver *console_driver; + +void stdio_announce(char *dev_name, int dev) +{ + printk(KERN_INFO "Virtual console %d assigned device '%s'\n", dev, + dev_name); +} + +static struct chan_opts opts = { + .announce = stdio_announce, + .xterm_title = "Virtual Console #%d", + .raw = 1, + .tramp_stack = 0, + .in_kernel = 1, +}; + +static int con_config(char *str); +static int con_get_config(char *dev, char *str, int size, char **error_out); +static int con_remove(char *str); + +static struct line_driver driver = { + .name = "UML console", + .device_name = "tty", + .devfs_name = "vc/", + .major = TTY_MAJOR, + .minor_start = 0, + .type = TTY_DRIVER_TYPE_CONSOLE, + .subtype = SYSTEM_TYPE_CONSOLE, + .read_irq = CONSOLE_IRQ, + .read_irq_name = "console", + .write_irq = CONSOLE_WRITE_IRQ, + .write_irq_name = "console-write", + .symlink_from = "ttys", + .symlink_to = "vc", + .mc = { + .name = "con", + .config = con_config, + .get_config = con_get_config, + .remove = con_remove, + }, +}; + +static struct lines console_lines = LINES_INIT(MAX_TTYS); + +/* The array is initialized by line_init, which is an initcall. The + * individual elements are protected by individual semaphores. + */ +struct line vts[MAX_TTYS] = { LINE_INIT(CONFIG_CON_ZERO_CHAN, &driver), + [ 1 ... MAX_TTYS - 1 ] = + LINE_INIT(CONFIG_CON_CHAN, &driver) }; + +static int con_config(char *str) +{ + return(line_config(vts, sizeof(vts)/sizeof(vts[0]), str)); +} + +static int con_get_config(char *dev, char *str, int size, char **error_out) +{ + return(line_get_config(dev, vts, sizeof(vts)/sizeof(vts[0]), str, + size, error_out)); +} + +static int con_remove(char *str) +{ + return(line_remove(vts, sizeof(vts)/sizeof(vts[0]), str)); +} + +static int con_open(struct tty_struct *tty, struct file *filp) +{ + return line_open(vts, tty, &opts); +} + +static int con_init_done = 0; + +static struct tty_operations console_ops = { + .open = con_open, + .close = line_close, + .write = line_write, + .write_room = line_write_room, + .chars_in_buffer = line_chars_in_buffer, + .set_termios = line_set_termios, + .ioctl = line_ioctl, +}; + +static void uml_console_write(struct console *console, const char *string, + unsigned len) +{ + struct line *line = &vts[console->index]; + + down(&line->sem); + console_write_chan(&line->chan_list, string, len); + up(&line->sem); +} + +static struct tty_driver *uml_console_device(struct console *c, int *index) +{ + *index = c->index; + return console_driver; +} + +static int uml_console_setup(struct console *co, char *options) +{ + struct line *line = &vts[co->index]; + + return console_open_chan(line,co,&opts); +} + +static struct console stdiocons = { + .name = "tty", + .write = uml_console_write, + .device = uml_console_device, + .setup = uml_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &vts, +}; + +int stdio_init(void) +{ + char *new_title; + + console_driver = line_register_devfs(&console_lines, &driver, + &console_ops, vts, + ARRAY_SIZE(vts)); + if (NULL == console_driver) + return -1; + printk(KERN_INFO "Initialized stdio console driver\n"); + + lines_init(vts, sizeof(vts)/sizeof(vts[0])); + + new_title = add_xterm_umid(opts.xterm_title); + if(new_title != NULL) + opts.xterm_title = new_title; + + con_init_done = 1; + register_console(&stdiocons); + return(0); +} +late_initcall(stdio_init); + +static void console_exit(void) +{ + if (!con_init_done) + return; + close_lines(vts, sizeof(vts)/sizeof(vts[0])); +} +__uml_exitcall(console_exit); + +static int console_chan_setup(char *str) +{ + return(line_setup(vts, sizeof(vts)/sizeof(vts[0]), str, 1)); +} +__setup("con", console_chan_setup); +__channel_help(console_chan_setup, "con"); + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/stdio_console.h b/arch/um/drivers/stdio_console.h new file mode 100644 index 000000000000..505a3d5bea5e --- /dev/null +++ b/arch/um/drivers/stdio_console.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __STDIO_CONSOLE_H +#define __STDIO_CONSOLE_H + +extern void save_console_flags(void); +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c new file mode 100644 index 000000000000..6fbb670ee274 --- /dev/null +++ b/arch/um/drivers/tty.c @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2001 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include "chan_user.h" +#include "user_util.h" +#include "user.h" +#include "os.h" + +struct tty_chan { + char *dev; + int raw; + struct termios tt; +}; + +static void *tty_chan_init(char *str, int device, struct chan_opts *opts) +{ + struct tty_chan *data; + + if(*str != ':'){ + printk("tty_init : channel type 'tty' must specify " + "a device\n"); + return(NULL); + } + str++; + + data = um_kmalloc(sizeof(*data)); + if(data == NULL) + return(NULL); + *data = ((struct tty_chan) { .dev = str, + .raw = opts->raw }); + + return(data); +} + +static int tty_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct tty_chan *data = d; + int fd, err; + + fd = os_open_file(data->dev, of_set_rw(OPENFLAGS(), input, output), 0); + if(fd < 0) return(fd); + if(data->raw){ + CATCH_EINTR(err = tcgetattr(fd, &data->tt)); + if(err) + return(err); + + err = raw(fd); + if(err) + return(err); + } + + *dev_out = data->dev; + return(fd); +} + +static int tty_console_write(int fd, const char *buf, int n, void *d) +{ + struct tty_chan *data = d; + + return(generic_console_write(fd, buf, n, &data->tt)); +} + +struct chan_ops tty_ops = { + .type = "tty", + .init = tty_chan_init, + .open = tty_open, + .close = generic_close, + .read = generic_read, + .write = generic_write, + .console_write = tty_console_write, + .window_size = generic_window_size, + .free = generic_free, + .winch = 0, +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c new file mode 100644 index 000000000000..4d8b165bfa48 --- /dev/null +++ b/arch/um/drivers/ubd_kern.c @@ -0,0 +1,1669 @@ +/* + * Copyright (C) 2000 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +/* 2001-09-28...2002-04-17 + * Partition stuff by James_McMechan@hotmail.com + * old style ubd by setting UBD_SHIFT to 0 + * 2002-09-27...2002-10-18 massive tinkering for 2.5 + * partitions have changed in 2.5 + * 2003-01-29 more tinkering for 2.5.59-1 + * This should now address the sysfs problems and has + * the symlink for devfs to allow for booting with + * the common /dev/ubd/discX/... names rather than + * only /dev/ubdN/discN this version also has lots of + * clean ups preparing for ubd-many. + * James McMechan + */ + +#define MAJOR_NR UBD_MAJOR +#define UBD_SHIFT 4 + +#include "linux/config.h" +#include "linux/module.h" +#include "linux/blkdev.h" +#include "linux/hdreg.h" +#include "linux/init.h" +#include "linux/devfs_fs_kernel.h" +#include "linux/cdrom.h" +#include "linux/proc_fs.h" +#include "linux/ctype.h" +#include "linux/capability.h" +#include "linux/mm.h" +#include "linux/vmalloc.h" +#include "linux/blkpg.h" +#include "linux/genhd.h" +#include "linux/spinlock.h" +#include "asm/segment.h" +#include "asm/uaccess.h" +#include "asm/irq.h" +#include "asm/types.h" +#include "asm/tlbflush.h" +#include "user_util.h" +#include "mem_user.h" +#include "kern_util.h" +#include "kern.h" +#include "mconsole_kern.h" +#include "init.h" +#include "irq_user.h" +#include "irq_kern.h" +#include "ubd_user.h" +#include "2_5compat.h" +#include "os.h" +#include "mem.h" +#include "mem_kern.h" +#include "cow.h" + +enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP }; + +struct io_thread_req { + enum ubd_req op; + int fds[2]; + unsigned long offsets[2]; + unsigned long long offset; + unsigned long length; + char *buffer; + int sectorsize; + unsigned long sector_mask; + unsigned long long cow_offset; + unsigned long bitmap_words[2]; + int map_fd; + unsigned long long map_offset; + int error; +}; + +extern int open_ubd_file(char *file, struct openflags *openflags, + char **backing_file_out, int *bitmap_offset_out, + unsigned long *bitmap_len_out, int *data_offset_out, + int *create_cow_out); +extern int create_cow_file(char *cow_file, char *backing_file, + struct openflags flags, int sectorsize, + int alignment, int *bitmap_offset_out, + unsigned long *bitmap_len_out, + int *data_offset_out); +extern int read_cow_bitmap(int fd, void *buf, int offset, int len); +extern void do_io(struct io_thread_req *req); + +static inline int ubd_test_bit(__u64 bit, unsigned char *data) +{ + __u64 n; + int bits, off; + + bits = sizeof(data[0]) * 8; + n = bit / bits; + off = bit % bits; + return((data[n] & (1 << off)) != 0); +} + +static inline void ubd_set_bit(__u64 bit, unsigned char *data) +{ + __u64 n; + int bits, off; + + bits = sizeof(data[0]) * 8; + n = bit / bits; + off = bit % bits; + data[n] |= (1 << off); +} +/*End stuff from ubd_user.h*/ + +#define DRIVER_NAME "uml-blkdev" + +static DEFINE_SPINLOCK(ubd_io_lock); +static DEFINE_SPINLOCK(ubd_lock); + +static void (*do_ubd)(void); + +static int ubd_open(struct inode * inode, struct file * filp); +static int ubd_release(struct inode * inode, struct file * file); +static int ubd_ioctl(struct inode * inode, struct file * file, + unsigned int cmd, unsigned long arg); + +#define MAX_DEV (8) + +/* Changed in early boot */ +static int ubd_do_mmap = 0; +#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE + +static struct block_device_operations ubd_blops = { + .owner = THIS_MODULE, + .open = ubd_open, + .release = ubd_release, + .ioctl = ubd_ioctl, +}; + +/* Protected by the queue_lock */ +static request_queue_t *ubd_queue; + +/* Protected by ubd_lock */ +static int fake_major = MAJOR_NR; + +static struct gendisk *ubd_gendisk[MAX_DEV]; +static struct gendisk *fake_gendisk[MAX_DEV]; + +#ifdef CONFIG_BLK_DEV_UBD_SYNC +#define OPEN_FLAGS ((struct openflags) { .r = 1, .w = 1, .s = 1, .c = 0, \ + .cl = 1 }) +#else +#define OPEN_FLAGS ((struct openflags) { .r = 1, .w = 1, .s = 0, .c = 0, \ + .cl = 1 }) +#endif + +/* Not protected - changed only in ubd_setup_common and then only to + * to enable O_SYNC. + */ +static struct openflags global_openflags = OPEN_FLAGS; + +struct cow { + char *file; + int fd; + unsigned long *bitmap; + unsigned long bitmap_len; + int bitmap_offset; + int data_offset; +}; + +struct ubd { + char *file; + int count; + int fd; + __u64 size; + struct openflags boot_openflags; + struct openflags openflags; + int no_cow; + struct cow cow; + struct platform_device pdev; + + int map_writes; + int map_reads; + int nomap_writes; + int nomap_reads; + int write_maps; +}; + +#define DEFAULT_COW { \ + .file = NULL, \ + .fd = -1, \ + .bitmap = NULL, \ + .bitmap_offset = 0, \ + .data_offset = 0, \ +} + +#define DEFAULT_UBD { \ + .file = NULL, \ + .count = 0, \ + .fd = -1, \ + .size = -1, \ + .boot_openflags = OPEN_FLAGS, \ + .openflags = OPEN_FLAGS, \ + .no_cow = 0, \ + .cow = DEFAULT_COW, \ + .map_writes = 0, \ + .map_reads = 0, \ + .nomap_writes = 0, \ + .nomap_reads = 0, \ + .write_maps = 0, \ +} + +struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; + +static int ubd0_init(void) +{ + struct ubd *dev = &ubd_dev[0]; + + if(dev->file == NULL) + dev->file = "root_fs"; + return(0); +} + +__initcall(ubd0_init); + +/* Only changed by fake_ide_setup which is a setup */ +static int fake_ide = 0; +static struct proc_dir_entry *proc_ide_root = NULL; +static struct proc_dir_entry *proc_ide = NULL; + +static void make_proc_ide(void) +{ + proc_ide_root = proc_mkdir("ide", NULL); + proc_ide = proc_mkdir("ide0", proc_ide_root); +} + +static int proc_ide_read_media(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int len; + + strcpy(page, "disk\n"); + len = strlen("disk\n"); + len -= off; + if (len < count){ + *eof = 1; + if (len <= 0) return 0; + } + else len = count; + *start = page + off; + return len; +} + +static void make_ide_entries(char *dev_name) +{ + struct proc_dir_entry *dir, *ent; + char name[64]; + + if(proc_ide_root == NULL) make_proc_ide(); + + dir = proc_mkdir(dev_name, proc_ide); + if(!dir) return; + + ent = create_proc_entry("media", S_IFREG|S_IRUGO, dir); + if(!ent) return; + ent->nlink = 1; + ent->data = NULL; + ent->read_proc = proc_ide_read_media; + ent->write_proc = NULL; + sprintf(name,"ide0/%s", dev_name); + proc_symlink(dev_name, proc_ide_root, name); +} + +static int fake_ide_setup(char *str) +{ + fake_ide = 1; + return(1); +} + +__setup("fake_ide", fake_ide_setup); + +__uml_help(fake_ide_setup, +"fake_ide\n" +" Create ide0 entries that map onto ubd devices.\n\n" +); + +static int parse_unit(char **ptr) +{ + char *str = *ptr, *end; + int n = -1; + + if(isdigit(*str)) { + n = simple_strtoul(str, &end, 0); + if(end == str) + return(-1); + *ptr = end; + } + else if (('a' <= *str) && (*str <= 'h')) { + n = *str - 'a'; + str++; + *ptr = str; + } + return(n); +} + +static int ubd_setup_common(char *str, int *index_out) +{ + struct ubd *dev; + struct openflags flags = global_openflags; + char *backing_file; + int n, err, i; + + if(index_out) *index_out = -1; + n = *str; + if(n == '='){ + char *end; + int major; + + str++; + if(!strcmp(str, "mmap")){ + CHOOSE_MODE(printk("mmap not supported by the ubd " + "driver in tt mode\n"), + ubd_do_mmap = 1); + return(0); + } + + if(!strcmp(str, "sync")){ + global_openflags = of_sync(global_openflags); + return(0); + } + major = simple_strtoul(str, &end, 0); + if((*end != '\0') || (end == str)){ + printk(KERN_ERR + "ubd_setup : didn't parse major number\n"); + return(1); + } + + err = 1; + spin_lock(&ubd_lock); + if(fake_major != MAJOR_NR){ + printk(KERN_ERR "Can't assign a fake major twice\n"); + goto out1; + } + + fake_major = major; + + printk(KERN_INFO "Setting extra ubd major number to %d\n", + major); + err = 0; + out1: + spin_unlock(&ubd_lock); + return(err); + } + + n = parse_unit(&str); + if(n < 0){ + printk(KERN_ERR "ubd_setup : couldn't parse unit number " + "'%s'\n", str); + return(1); + } + if(n >= MAX_DEV){ + printk(KERN_ERR "ubd_setup : index %d out of range " + "(%d devices, from 0 to %d)\n", n, MAX_DEV, MAX_DEV - 1); + return(1); + } + + err = 1; + spin_lock(&ubd_lock); + + dev = &ubd_dev[n]; + if(dev->file != NULL){ + printk(KERN_ERR "ubd_setup : device already configured\n"); + goto out; + } + + if (index_out) + *index_out = n; + + for (i = 0; i < 4; i++) { + switch (*str) { + case 'r': + flags.w = 0; + break; + case 's': + flags.s = 1; + break; + case 'd': + dev->no_cow = 1; + break; + case '=': + str++; + goto break_loop; + default: + printk(KERN_ERR "ubd_setup : Expected '=' or flag letter (r,s or d)\n"); + goto out; + } + str++; + } + + if (*str == '=') + printk(KERN_ERR "ubd_setup : Too many flags specified\n"); + else + printk(KERN_ERR "ubd_setup : Expected '='\n"); + goto out; + +break_loop: + err = 0; + backing_file = strchr(str, ','); + + if (!backing_file) { + backing_file = strchr(str, ':'); + } + + if(backing_file){ + if(dev->no_cow) + printk(KERN_ERR "Can't specify both 'd' and a " + "cow file\n"); + else { + *backing_file = '\0'; + backing_file++; + } + } + dev->file = str; + dev->cow.file = backing_file; + dev->boot_openflags = flags; +out: + spin_unlock(&ubd_lock); + return(err); +} + +static int ubd_setup(char *str) +{ + ubd_setup_common(str, NULL); + return(1); +} + +__setup("ubd", ubd_setup); +__uml_help(ubd_setup, +"ubd=[(:|,)]\n" +" This is used to associate a device with a file in the underlying\n" +" filesystem. When specifying two filenames, the first one is the\n" +" COW name and the second is the backing file name. As separator you can\n" +" use either a ':' or a ',': the first one allows writing things like;\n" +" ubd0=~/Uml/root_cow:~/Uml/root_backing_file\n" +" while with a ',' the shell would not expand the 2nd '~'.\n" +" When using only one filename, UML will detect whether to thread it like\n" +" a COW file or a backing file. To override this detection, add the 'd'\n" +" flag:\n" +" ubd0d=BackingFile\n" +" Usually, there is a filesystem in the file, but \n" +" that's not required. Swap devices containing swap files can be\n" +" specified like this. Also, a file which doesn't contain a\n" +" filesystem can have its contents read in the virtual \n" +" machine by running 'dd' on the device. must be in the range\n" +" 0 to 7. Appending an 'r' to the number will cause that device\n" +" to be mounted read-only. For example ubd1r=./ext_fs. Appending\n" +" an 's' will cause data to be written to disk on the host immediately.\n\n" +); + +static int udb_setup(char *str) +{ + printk("udb%s specified on command line is almost certainly a ubd -> " + "udb TYPO\n", str); + return(1); +} + +__setup("udb", udb_setup); +__uml_help(udb_setup, +"udb\n" +" This option is here solely to catch ubd -> udb typos, which can be\n\n" +" to impossible to catch visually unless you specifically look for\n\n" +" them. The only result of any option starting with 'udb' is an error\n\n" +" in the boot output.\n\n" +); + +static int fakehd_set = 0; +static int fakehd(char *str) +{ + printk(KERN_INFO "fakehd : Changing ubd name to \"hd\".\n"); + fakehd_set = 1; + return 1; +} + +__setup("fakehd", fakehd); +__uml_help(fakehd, +"fakehd\n" +" Change the ubd device name to \"hd\".\n\n" +); + +static void do_ubd_request(request_queue_t * q); + +/* Only changed by ubd_init, which is an initcall. */ +int thread_fd = -1; + +/* Changed by ubd_handler, which is serialized because interrupts only + * happen on CPU 0. + */ +int intr_count = 0; + +/* call ubd_finish if you need to serialize */ +static void __ubd_finish(struct request *req, int error) +{ + int nsect; + + if(error){ + end_request(req, 0); + return; + } + nsect = req->current_nr_sectors; + req->sector += nsect; + req->buffer += nsect << 9; + req->errors = 0; + req->nr_sectors -= nsect; + req->current_nr_sectors = 0; + end_request(req, 1); +} + +static inline void ubd_finish(struct request *req, int error) +{ + spin_lock(&ubd_io_lock); + __ubd_finish(req, error); + spin_unlock(&ubd_io_lock); +} + +/* Called without ubd_io_lock held */ +static void ubd_handler(void) +{ + struct io_thread_req req; + struct request *rq = elv_next_request(ubd_queue); + int n, err; + + do_ubd = NULL; + intr_count++; + n = os_read_file(thread_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " + "err = %d\n", os_getpid(), -n); + spin_lock(&ubd_io_lock); + end_request(rq, 0); + spin_unlock(&ubd_io_lock); + return; + } + + if((req.op != UBD_MMAP) && + ((req.offset != ((__u64) (rq->sector)) << 9) || + (req.length != (rq->current_nr_sectors) << 9))) + panic("I/O op mismatch"); + + if(req.map_fd != -1){ + err = physmem_subst_mapping(req.buffer, req.map_fd, + req.map_offset, 1); + if(err) + printk("ubd_handler - physmem_subst_mapping failed, " + "err = %d\n", -err); + } + + ubd_finish(rq, req.error); + reactivate_fd(thread_fd, UBD_IRQ); + do_ubd_request(ubd_queue); +} + +static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused) +{ + ubd_handler(); + return(IRQ_HANDLED); +} + +/* Only changed by ubd_init, which is an initcall. */ +static int io_pid = -1; + +void kill_io_thread(void) +{ + if(io_pid != -1) + os_kill_process(io_pid, 1); +} + +__uml_exitcall(kill_io_thread); + +static int ubd_file_size(struct ubd *dev, __u64 *size_out) +{ + char *file; + + file = dev->cow.file ? dev->cow.file : dev->file; + return(os_file_size(file, size_out)); +} + +static void ubd_close(struct ubd *dev) +{ + if(ubd_do_mmap) + physmem_forget_descriptor(dev->fd); + os_close_file(dev->fd); + if(dev->cow.file == NULL) + return; + + if(ubd_do_mmap) + physmem_forget_descriptor(dev->cow.fd); + os_close_file(dev->cow.fd); + vfree(dev->cow.bitmap); + dev->cow.bitmap = NULL; +} + +static int ubd_open_dev(struct ubd *dev) +{ + struct openflags flags; + char **back_ptr; + int err, create_cow, *create_ptr; + + dev->openflags = dev->boot_openflags; + create_cow = 0; + create_ptr = (dev->cow.file != NULL) ? &create_cow : NULL; + back_ptr = dev->no_cow ? NULL : &dev->cow.file; + dev->fd = open_ubd_file(dev->file, &dev->openflags, back_ptr, + &dev->cow.bitmap_offset, &dev->cow.bitmap_len, + &dev->cow.data_offset, create_ptr); + + if((dev->fd == -ENOENT) && create_cow){ + dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->openflags, 1 << 9, PAGE_SIZE, + &dev->cow.bitmap_offset, + &dev->cow.bitmap_len, + &dev->cow.data_offset); + if(dev->fd >= 0){ + printk(KERN_INFO "Creating \"%s\" as COW file for " + "\"%s\"\n", dev->file, dev->cow.file); + } + } + + if(dev->fd < 0){ + printk("Failed to open '%s', errno = %d\n", dev->file, + -dev->fd); + return(dev->fd); + } + + if(dev->cow.file != NULL){ + err = -ENOMEM; + dev->cow.bitmap = (void *) vmalloc(dev->cow.bitmap_len); + if(dev->cow.bitmap == NULL){ + printk(KERN_ERR "Failed to vmalloc COW bitmap\n"); + goto error; + } + flush_tlb_kernel_vm(); + + err = read_cow_bitmap(dev->fd, dev->cow.bitmap, + dev->cow.bitmap_offset, + dev->cow.bitmap_len); + if(err < 0) + goto error; + + flags = dev->openflags; + flags.w = 0; + err = open_ubd_file(dev->cow.file, &flags, NULL, NULL, NULL, + NULL, NULL); + if(err < 0) goto error; + dev->cow.fd = err; + } + return(0); + error: + os_close_file(dev->fd); + return(err); +} + +static int ubd_new_disk(int major, u64 size, int unit, + struct gendisk **disk_out) + +{ + struct gendisk *disk; + char from[sizeof("ubd/nnnnn\0")], to[sizeof("discnnnnn/disc\0")]; + int err; + + disk = alloc_disk(1 << UBD_SHIFT); + if(disk == NULL) + return(-ENOMEM); + + disk->major = major; + disk->first_minor = unit << UBD_SHIFT; + disk->fops = &ubd_blops; + set_capacity(disk, size / 512); + if(major == MAJOR_NR){ + sprintf(disk->disk_name, "ubd%c", 'a' + unit); + sprintf(disk->devfs_name, "ubd/disc%d", unit); + sprintf(from, "ubd/%d", unit); + sprintf(to, "disc%d/disc", unit); + err = devfs_mk_symlink(from, to); + if(err) + printk("ubd_new_disk failed to make link from %s to " + "%s, error = %d\n", from, to, err); + } + else { + sprintf(disk->disk_name, "ubd_fake%d", unit); + sprintf(disk->devfs_name, "ubd_fake/disc%d", unit); + } + + /* sysfs register (not for ide fake devices) */ + if (major == MAJOR_NR) { + ubd_dev[unit].pdev.id = unit; + ubd_dev[unit].pdev.name = DRIVER_NAME; + platform_device_register(&ubd_dev[unit].pdev); + disk->driverfs_dev = &ubd_dev[unit].pdev.dev; + } + + disk->private_data = &ubd_dev[unit]; + disk->queue = ubd_queue; + add_disk(disk); + + *disk_out = disk; + return 0; +} + +#define ROUND_BLOCK(n) ((n + ((1 << 9) - 1)) & (-1 << 9)) + +static int ubd_add(int n) +{ + struct ubd *dev = &ubd_dev[n]; + int err; + + if(dev->file == NULL) + return(-ENODEV); + + if (ubd_open_dev(dev)) + return(-ENODEV); + + err = ubd_file_size(dev, &dev->size); + if(err < 0) + return(err); + + dev->size = ROUND_BLOCK(dev->size); + + err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); + if(err) + return(err); + + if(fake_major != MAJOR_NR) + ubd_new_disk(fake_major, dev->size, n, + &fake_gendisk[n]); + + /* perhaps this should also be under the "if (fake_major)" above */ + /* using the fake_disk->disk_name and also the fakehd_set name */ + if (fake_ide) + make_ide_entries(ubd_gendisk[n]->disk_name); + + ubd_close(dev); + return 0; +} + +static int ubd_config(char *str) +{ + int n, err; + + str = uml_strdup(str); + if(str == NULL){ + printk(KERN_ERR "ubd_config failed to strdup string\n"); + return(1); + } + err = ubd_setup_common(str, &n); + if(err){ + kfree(str); + return(-1); + } + if(n == -1) return(0); + + spin_lock(&ubd_lock); + err = ubd_add(n); + if(err) + ubd_dev[n].file = NULL; + spin_unlock(&ubd_lock); + + return(err); +} + +static int ubd_get_config(char *name, char *str, int size, char **error_out) +{ + struct ubd *dev; + int n, len = 0; + + n = parse_unit(&name); + if((n >= MAX_DEV) || (n < 0)){ + *error_out = "ubd_get_config : device number out of range"; + return(-1); + } + + dev = &ubd_dev[n]; + spin_lock(&ubd_lock); + + if(dev->file == NULL){ + CONFIG_CHUNK(str, size, len, "", 1); + goto out; + } + + CONFIG_CHUNK(str, size, len, dev->file, 0); + + if(dev->cow.file != NULL){ + CONFIG_CHUNK(str, size, len, ",", 0); + CONFIG_CHUNK(str, size, len, dev->cow.file, 1); + } + else CONFIG_CHUNK(str, size, len, "", 1); + + out: + spin_unlock(&ubd_lock); + return(len); +} + +static int ubd_remove(char *str) +{ + struct ubd *dev; + int n, err = -ENODEV; + + n = parse_unit(&str); + + if((n < 0) || (n >= MAX_DEV)) + return(err); + + dev = &ubd_dev[n]; + if(dev->count > 0) + return(-EBUSY); /* you cannot remove a open disk */ + + err = 0; + spin_lock(&ubd_lock); + + if(ubd_gendisk[n] == NULL) + goto out; + + del_gendisk(ubd_gendisk[n]); + put_disk(ubd_gendisk[n]); + ubd_gendisk[n] = NULL; + + if(fake_gendisk[n] != NULL){ + del_gendisk(fake_gendisk[n]); + put_disk(fake_gendisk[n]); + fake_gendisk[n] = NULL; + } + + platform_device_unregister(&dev->pdev); + *dev = ((struct ubd) DEFAULT_UBD); + err = 0; + out: + spin_unlock(&ubd_lock); + return(err); +} + +static struct mc_device ubd_mc = { + .name = "ubd", + .config = ubd_config, + .get_config = ubd_get_config, + .remove = ubd_remove, +}; + +static int ubd_mc_init(void) +{ + mconsole_register_dev(&ubd_mc); + return 0; +} + +__initcall(ubd_mc_init); + +static struct device_driver ubd_driver = { + .name = DRIVER_NAME, + .bus = &platform_bus_type, +}; + +int ubd_init(void) +{ + int i; + + devfs_mk_dir("ubd"); + if (register_blkdev(MAJOR_NR, "ubd")) + return -1; + + ubd_queue = blk_init_queue(do_ubd_request, &ubd_io_lock); + if (!ubd_queue) { + unregister_blkdev(MAJOR_NR, "ubd"); + return -1; + } + + if (fake_major != MAJOR_NR) { + char name[sizeof("ubd_nnn\0")]; + + snprintf(name, sizeof(name), "ubd_%d", fake_major); + devfs_mk_dir(name); + if (register_blkdev(fake_major, "ubd")) + return -1; + } + driver_register(&ubd_driver); + for (i = 0; i < MAX_DEV; i++) + ubd_add(i); + return 0; +} + +late_initcall(ubd_init); + +int ubd_driver_init(void){ + unsigned long stack; + int err; + + /* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/ + if(global_openflags.s){ + printk(KERN_INFO "ubd: Synchronous mode\n"); + /* Letting ubd=sync be like using ubd#s= instead of ubd#= is + * enough. So use anyway the io thread. */ + } + stack = alloc_stack(0, 0); + io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), + &thread_fd); + if(io_pid < 0){ + printk(KERN_ERR + "ubd : Failed to start I/O thread (errno = %d) - " + "falling back to synchronous I/O\n", -io_pid); + io_pid = -1; + return(0); + } + err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, + SA_INTERRUPT, "ubd", ubd_dev); + if(err != 0) + printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); + return(err); +} + +device_initcall(ubd_driver_init); + +static int ubd_open(struct inode *inode, struct file *filp) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct ubd *dev = disk->private_data; + int err = 0; + + if(dev->count == 0){ + err = ubd_open_dev(dev); + if(err){ + printk(KERN_ERR "%s: Can't open \"%s\": errno = %d\n", + disk->disk_name, dev->file, -err); + goto out; + } + } + dev->count++; + if((filp->f_mode & FMODE_WRITE) && !dev->openflags.w){ + if(--dev->count == 0) ubd_close(dev); + err = -EROFS; + } + out: + return(err); +} + +static int ubd_release(struct inode * inode, struct file * file) +{ + struct gendisk *disk = inode->i_bdev->bd_disk; + struct ubd *dev = disk->private_data; + + if(--dev->count == 0) + ubd_close(dev); + return(0); +} + +static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask, + __u64 *cow_offset, unsigned long *bitmap, + __u64 bitmap_offset, unsigned long *bitmap_words, + __u64 bitmap_len) +{ + __u64 sector = io_offset >> 9; + int i, update_bitmap = 0; + + for(i = 0; i < length >> 9; i++){ + if(cow_mask != NULL) + ubd_set_bit(i, (unsigned char *) cow_mask); + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + continue; + + update_bitmap = 1; + ubd_set_bit(sector + i, (unsigned char *) bitmap); + } + + if(!update_bitmap) + return; + + *cow_offset = sector / (sizeof(unsigned long) * 8); + + /* This takes care of the case where we're exactly at the end of the + * device, and *cow_offset + 1 is off the end. So, just back it up + * by one word. Thanks to Lynn Kerby for the fix and James McMechan + * for the original diagnosis. + */ + if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) / + sizeof(unsigned long) - 1)) + (*cow_offset)--; + + bitmap_words[0] = bitmap[*cow_offset]; + bitmap_words[1] = bitmap[*cow_offset + 1]; + + *cow_offset *= sizeof(unsigned long); + *cow_offset += bitmap_offset; +} + +static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, + __u64 bitmap_offset, __u64 bitmap_len) +{ + __u64 sector = req->offset >> 9; + int i; + + if(req->length > (sizeof(req->sector_mask) * 8) << 9) + panic("Operation too long"); + + if(req->op == UBD_READ) { + for(i = 0; i < req->length >> 9; i++){ + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + ubd_set_bit(i, (unsigned char *) + &req->sector_mask); + } + } + else cowify_bitmap(req->offset, req->length, &req->sector_mask, + &req->cow_offset, bitmap, bitmap_offset, + req->bitmap_words, bitmap_len); +} + +static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset) +{ + __u64 sector; + unsigned char *bitmap; + int bit, i; + + /* mmap must have been requested on the command line */ + if(!ubd_do_mmap) + return(-1); + + /* The buffer must be page aligned */ + if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0) + return(-1); + + /* The request must be a page long */ + if((req->current_nr_sectors << 9) != PAGE_SIZE) + return(-1); + + if(dev->cow.file == NULL) + return(dev->fd); + + sector = offset >> 9; + bitmap = (unsigned char *) dev->cow.bitmap; + bit = ubd_test_bit(sector, bitmap); + + for(i = 1; i < req->current_nr_sectors; i++){ + if(ubd_test_bit(sector + i, bitmap) != bit) + return(-1); + } + + if(bit || (rq_data_dir(req) == WRITE)) + offset += dev->cow.data_offset; + + /* The data on disk must be page aligned */ + if((offset % UBD_MMAP_BLOCK_SIZE) != 0) + return(-1); + + return(bit ? dev->fd : dev->cow.fd); +} + +static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset, + struct request *req, + struct io_thread_req *io_req) +{ + int err; + + if(rq_data_dir(req) == WRITE){ + /* Writes are almost no-ops since the new data is already in the + * host page cache + */ + dev->map_writes++; + if(dev->cow.file != NULL) + cowify_bitmap(io_req->offset, io_req->length, + &io_req->sector_mask, &io_req->cow_offset, + dev->cow.bitmap, dev->cow.bitmap_offset, + io_req->bitmap_words, + dev->cow.bitmap_len); + } + else { + int w; + + if((dev->cow.file != NULL) && (fd == dev->cow.fd)) + w = 0; + else w = dev->openflags.w; + + if((dev->cow.file != NULL) && (fd == dev->fd)) + offset += dev->cow.data_offset; + + err = physmem_subst_mapping(req->buffer, fd, offset, w); + if(err){ + printk("physmem_subst_mapping failed, err = %d\n", + -err); + return(1); + } + dev->map_reads++; + } + io_req->op = UBD_MMAP; + io_req->buffer = req->buffer; + return(0); +} + +/* Called with ubd_io_lock held */ +static int prepare_request(struct request *req, struct io_thread_req *io_req) +{ + struct gendisk *disk = req->rq_disk; + struct ubd *dev = disk->private_data; + __u64 offset; + int len, fd; + + if(req->rq_status == RQ_INACTIVE) return(1); + + if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ + printk("Write attempted on readonly ubd device %s\n", + disk->disk_name); + end_request(req, 0); + return(1); + } + + offset = ((__u64) req->sector) << 9; + len = req->current_nr_sectors << 9; + + io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; + io_req->fds[1] = dev->fd; + io_req->map_fd = -1; + io_req->cow_offset = -1; + io_req->offset = offset; + io_req->length = len; + io_req->error = 0; + io_req->sector_mask = 0; + + fd = mmap_fd(req, dev, io_req->offset); + if(fd > 0){ + /* If mmapping is otherwise OK, but the first access to the + * page is a write, then it's not mapped in yet. So we have + * to write the data to disk first, then we can map the disk + * page in and continue normally from there. + */ + if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){ + io_req->map_fd = dev->fd; + io_req->map_offset = io_req->offset + + dev->cow.data_offset; + dev->write_maps++; + } + else return(prepare_mmap_request(dev, fd, io_req->offset, req, + io_req)); + } + + if(rq_data_dir(req) == READ) + dev->nomap_reads++; + else dev->nomap_writes++; + + io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; + io_req->offsets[0] = 0; + io_req->offsets[1] = dev->cow.data_offset; + io_req->buffer = req->buffer; + io_req->sectorsize = 1 << 9; + + if(dev->cow.file != NULL) + cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset, + dev->cow.bitmap_len); + + return(0); +} + +/* Called with ubd_io_lock held */ +static void do_ubd_request(request_queue_t *q) +{ + struct io_thread_req io_req; + struct request *req; + int err, n; + + if(thread_fd == -1){ + while((req = elv_next_request(q)) != NULL){ + err = prepare_request(req, &io_req); + if(!err){ + do_io(&io_req); + __ubd_finish(req, io_req.error); + } + } + } + else { + if(do_ubd || (req = elv_next_request(q)) == NULL) + return; + err = prepare_request(req, &io_req); + if(!err){ + do_ubd = ubd_handler; + n = os_write_file(thread_fd, (char *) &io_req, + sizeof(io_req)); + if(n != sizeof(io_req)) + printk("write to io thread failed, " + "errno = %d\n", -n); + } + } +} + +static int ubd_ioctl(struct inode * inode, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct hd_geometry __user *loc = (struct hd_geometry __user *) arg; + struct ubd *dev = inode->i_bdev->bd_disk->private_data; + struct hd_driveid ubd_id = { + .cyls = 0, + .heads = 128, + .sectors = 32, + }; + + switch (cmd) { + struct hd_geometry g; + struct cdrom_volctrl volume; + case HDIO_GETGEO: + if(!loc) return(-EINVAL); + g.heads = 128; + g.sectors = 32; + g.cylinders = dev->size / (128 * 32 * 512); + g.start = get_start_sect(inode->i_bdev); + return(copy_to_user(loc, &g, sizeof(g)) ? -EFAULT : 0); + + case HDIO_GET_IDENTITY: + ubd_id.cyls = dev->size / (128 * 32 * 512); + if(copy_to_user((char __user *) arg, (char *) &ubd_id, + sizeof(ubd_id))) + return(-EFAULT); + return(0); + + case CDROMVOLREAD: + if(copy_from_user(&volume, (char __user *) arg, sizeof(volume))) + return(-EFAULT); + volume.channel0 = 255; + volume.channel1 = 255; + volume.channel2 = 255; + volume.channel3 = 255; + if(copy_to_user((char __user *) arg, &volume, sizeof(volume))) + return(-EFAULT); + return(0); + } + return(-EINVAL); +} + +static int ubd_check_remapped(int fd, unsigned long address, int is_write, + __u64 offset) +{ + __u64 bitmap_offset; + unsigned long new_bitmap[2]; + int i, err, n; + + /* If it's not a write access, we can't do anything about it */ + if(!is_write) + return(0); + + /* We have a write */ + for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){ + struct ubd *dev = &ubd_dev[i]; + + if((dev->fd != fd) && (dev->cow.fd != fd)) + continue; + + /* It's a write to a ubd device */ + + if(!dev->openflags.w){ + /* It's a write access on a read-only device - probably + * shouldn't happen. If the kernel is trying to change + * something with no intention of writing it back out, + * then this message will clue us in that this needs + * fixing + */ + printk("Write access to mapped page from readonly ubd " + "device %d\n", i); + return(0); + } + + /* It's a write to a writeable ubd device - it must be COWed + * because, otherwise, the page would have been mapped in + * writeable + */ + + if(!dev->cow.file) + panic("Write fault on writeable non-COW ubd device %d", + i); + + /* It should also be an access to the backing file since the + * COW pages should be mapped in read-write + */ + + if(fd == dev->fd) + panic("Write fault on a backing page of ubd " + "device %d\n", i); + + /* So, we do the write, copying the backing data to the COW + * file... + */ + + err = os_seek_file(dev->fd, offset + dev->cow.data_offset); + if(err < 0) + panic("Couldn't seek to %lld in COW file of ubd " + "device %d, err = %d", + offset + dev->cow.data_offset, i, -err); + + n = os_write_file(dev->fd, (void *) address, PAGE_SIZE); + if(n != PAGE_SIZE) + panic("Couldn't copy data to COW file of ubd " + "device %d, err = %d", i, -n); + + /* ... updating the COW bitmap... */ + + cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset, + dev->cow.bitmap, dev->cow.bitmap_offset, + new_bitmap, dev->cow.bitmap_len); + + err = os_seek_file(dev->fd, bitmap_offset); + if(err < 0) + panic("Couldn't seek to %lld in COW file of ubd " + "device %d, err = %d", bitmap_offset, i, -err); + + n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap)); + if(n != sizeof(new_bitmap)) + panic("Couldn't update bitmap of ubd device %d, " + "err = %d", i, -n); + + /* Maybe we can map the COW page in, and maybe we can't. If + * it is a pre-V3 COW file, we can't, since the alignment will + * be wrong. If it is a V3 or later COW file which has been + * moved to a system with a larger page size, then maybe we + * can't, depending on the exact location of the page. + */ + + offset += dev->cow.data_offset; + + /* Remove the remapping, putting the original anonymous page + * back. If the COW file can be mapped in, that is done. + * Otherwise, the COW page is read in. + */ + + if(!physmem_remove_mapping((void *) address)) + panic("Address 0x%lx not remapped by ubd device %d", + address, i); + if((offset % UBD_MMAP_BLOCK_SIZE) == 0) + physmem_subst_mapping((void *) address, dev->fd, + offset, 1); + else { + err = os_seek_file(dev->fd, offset); + if(err < 0) + panic("Couldn't seek to %lld in COW file of " + "ubd device %d, err = %d", offset, i, + -err); + + n = os_read_file(dev->fd, (void *) address, PAGE_SIZE); + if(n != PAGE_SIZE) + panic("Failed to read page from offset %llx of " + "COW file of ubd device %d, err = %d", + offset, i, -n); + } + + return(1); + } + + /* It's not a write on a ubd device */ + return(0); +} + +static struct remapper ubd_remapper = { + .list = LIST_HEAD_INIT(ubd_remapper.list), + .proc = ubd_check_remapped, +}; + +static int ubd_remapper_setup(void) +{ + if(ubd_do_mmap) + register_remapper(&ubd_remapper); + + return(0); +} + +__initcall(ubd_remapper_setup); + +static int same_backing_files(char *from_cmdline, char *from_cow, char *cow) +{ + struct uml_stat buf1, buf2; + int err; + + if(from_cmdline == NULL) return(1); + if(!strcmp(from_cmdline, from_cow)) return(1); + + err = os_stat_file(from_cmdline, &buf1); + if(err < 0){ + printk("Couldn't stat '%s', err = %d\n", from_cmdline, -err); + return(1); + } + err = os_stat_file(from_cow, &buf2); + if(err < 0){ + printk("Couldn't stat '%s', err = %d\n", from_cow, -err); + return(1); + } + if((buf1.ust_dev == buf2.ust_dev) && (buf1.ust_ino == buf2.ust_ino)) + return(1); + + printk("Backing file mismatch - \"%s\" requested,\n" + "\"%s\" specified in COW header of \"%s\"\n", + from_cmdline, from_cow, cow); + return(0); +} + +static int backing_file_mismatch(char *file, __u64 size, time_t mtime) +{ + unsigned long modtime; + long long actual; + int err; + + err = os_file_modtime(file, &modtime); + if(err < 0){ + printk("Failed to get modification time of backing file " + "\"%s\", err = %d\n", file, -err); + return(err); + } + + err = os_file_size(file, &actual); + if(err < 0){ + printk("Failed to get size of backing file \"%s\", " + "err = %d\n", file, -err); + return(err); + } + + if(actual != size){ + /*__u64 can be a long on AMD64 and with %lu GCC complains; so + * the typecast.*/ + printk("Size mismatch (%llu vs %llu) of COW header vs backing " + "file\n", (unsigned long long) size, actual); + return(-EINVAL); + } + if(modtime != mtime){ + printk("mtime mismatch (%ld vs %ld) of COW header vs backing " + "file\n", mtime, modtime); + return(-EINVAL); + } + return(0); +} + +int read_cow_bitmap(int fd, void *buf, int offset, int len) +{ + int err; + + err = os_seek_file(fd, offset); + if(err < 0) + return(err); + + err = os_read_file(fd, buf, len); + if(err < 0) + return(err); + + return(0); +} + +int open_ubd_file(char *file, struct openflags *openflags, + char **backing_file_out, int *bitmap_offset_out, + unsigned long *bitmap_len_out, int *data_offset_out, + int *create_cow_out) +{ + time_t mtime; + unsigned long long size; + __u32 version, align; + char *backing_file; + int fd, err, sectorsize, same, mode = 0644; + + fd = os_open_file(file, *openflags, mode); + if(fd < 0){ + if((fd == -ENOENT) && (create_cow_out != NULL)) + *create_cow_out = 1; + if(!openflags->w || + ((fd != -EROFS) && (fd != -EACCES))) return(fd); + openflags->w = 0; + fd = os_open_file(file, *openflags, mode); + if(fd < 0) + return(fd); + } + + err = os_lock_file(fd, openflags->w); + if(err < 0){ + printk("Failed to lock '%s', err = %d\n", file, -err); + goto out_close; + } + + if(backing_file_out == NULL) return(fd); + + err = read_cow_header(file_reader, &fd, &version, &backing_file, &mtime, + &size, §orsize, &align, bitmap_offset_out); + if(err && (*backing_file_out != NULL)){ + printk("Failed to read COW header from COW file \"%s\", " + "errno = %d\n", file, -err); + goto out_close; + } + if(err) return(fd); + + if(backing_file_out == NULL) return(fd); + + same = same_backing_files(*backing_file_out, backing_file, file); + + if(!same && !backing_file_mismatch(*backing_file_out, size, mtime)){ + printk("Switching backing file to '%s'\n", *backing_file_out); + err = write_cow_header(file, fd, *backing_file_out, + sectorsize, align, &size); + if(err){ + printk("Switch failed, errno = %d\n", -err); + return(err); + } + } + else { + *backing_file_out = backing_file; + err = backing_file_mismatch(*backing_file_out, size, mtime); + if(err) goto out_close; + } + + cow_sizes(version, size, sectorsize, align, *bitmap_offset_out, + bitmap_len_out, data_offset_out); + + return(fd); + out_close: + os_close_file(fd); + return(err); +} + +int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, + int sectorsize, int alignment, int *bitmap_offset_out, + unsigned long *bitmap_len_out, int *data_offset_out) +{ + int err, fd; + + flags.c = 1; + fd = open_ubd_file(cow_file, &flags, NULL, NULL, NULL, NULL, NULL); + if(fd < 0){ + err = fd; + printk("Open of COW file '%s' failed, errno = %d\n", cow_file, + -err); + goto out; + } + + err = init_cow_file(fd, cow_file, backing_file, sectorsize, alignment, + bitmap_offset_out, bitmap_len_out, + data_offset_out); + if(!err) + return(fd); + os_close_file(fd); + out: + return(err); +} + +static int update_bitmap(struct io_thread_req *req) +{ + int n; + + if(req->cow_offset == -1) + return(0); + + n = os_seek_file(req->fds[1], req->cow_offset); + if(n < 0){ + printk("do_io - bitmap lseek failed : err = %d\n", -n); + return(1); + } + + n = os_write_file(req->fds[1], &req->bitmap_words, + sizeof(req->bitmap_words)); + if(n != sizeof(req->bitmap_words)){ + printk("do_io - bitmap update failed, err = %d fd = %d\n", -n, + req->fds[1]); + return(1); + } + + return(0); +} + +void do_io(struct io_thread_req *req) +{ + char *buf; + unsigned long len; + int n, nsectors, start, end, bit; + int err; + __u64 off; + + if(req->op == UBD_MMAP){ + /* Touch the page to force the host to do any necessary IO to + * get it into memory + */ + n = *((volatile int *) req->buffer); + req->error = update_bitmap(req); + return; + } + + nsectors = req->length / req->sectorsize; + start = 0; + do { + bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask); + end = start; + while((end < nsectors) && + (ubd_test_bit(end, (unsigned char *) + &req->sector_mask) == bit)) + end++; + + off = req->offset + req->offsets[bit] + + start * req->sectorsize; + len = (end - start) * req->sectorsize; + buf = &req->buffer[start * req->sectorsize]; + + err = os_seek_file(req->fds[bit], off); + if(err < 0){ + printk("do_io - lseek failed : err = %d\n", -err); + req->error = 1; + return; + } + if(req->op == UBD_READ){ + n = 0; + do { + buf = &buf[n]; + len -= n; + n = os_read_file(req->fds[bit], buf, len); + if (n < 0) { + printk("do_io - read failed, err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } while((n < len) && (n != 0)); + if (n < len) memset(&buf[n], 0, len - n); + } + else { + n = os_write_file(req->fds[bit], buf, len); + if(n != len){ + printk("do_io - write failed err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } + + start = end; + } while(start < nsectors); + + req->error = update_bitmap(req); +} + +/* Changed in start_io_thread, which is serialized by being called only + * from ubd_init, which is an initcall. + */ +int kernel_fd = -1; + +/* Only changed by the io thread */ +int io_count = 0; + +int io_thread(void *arg) +{ + struct io_thread_req req; + int n; + + ignore_sigwinch_sig(); + while(1){ + n = os_read_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + if(n < 0) + printk("io_thread - read failed, fd = %d, " + "err = %d\n", kernel_fd, -n); + else { + printk("io_thread - short read, fd = %d, " + "length = %d\n", kernel_fd, n); + } + continue; + } + io_count++; + do_io(&req); + n = os_write_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)) + printk("io_thread - write failed, fd = %d, err = %d\n", + kernel_fd, -n); + } +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c new file mode 100644 index 000000000000..b94d2bc4fe06 --- /dev/null +++ b/arch/um/drivers/ubd_user.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "asm/types.h" +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "ubd_user.h" +#include "os.h" +#include "cow.h" + +#include +#include + +void ignore_sigwinch_sig(void) +{ + signal(SIGWINCH, SIG_IGN); +} + +int start_io_thread(unsigned long sp, int *fd_out) +{ + int pid, fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err < 0){ + printk("start_io_thread - os_pipe failed, err = %d\n", -err); + goto out; + } + + kernel_fd = fds[0]; + *fd_out = fds[1]; + + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, + NULL); + if(pid < 0){ + printk("start_io_thread - clone failed : errno = %d\n", errno); + err = -errno; + goto out_close; + } + + return(pid); + + out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); + kernel_fd = -1; + *fd_out = -1; + out: + return(err); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c new file mode 100644 index 000000000000..93dc1911363f --- /dev/null +++ b/arch/um/drivers/xterm.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "kern_util.h" +#include "chan_user.h" +#include "helper.h" +#include "user_util.h" +#include "user.h" +#include "os.h" +#include "xterm.h" + +struct xterm_chan { + int pid; + int helper_pid; + char *title; + int device; + int raw; + struct termios tt; + unsigned long stack; + int direct_rcv; +}; + +/* Not static because it's called directly by the tt mode gdb code */ +void *xterm_init(char *str, int device, struct chan_opts *opts) +{ + struct xterm_chan *data; + + data = malloc(sizeof(*data)); + if(data == NULL) return(NULL); + *data = ((struct xterm_chan) { .pid = -1, + .helper_pid = -1, + .device = device, + .title = opts->xterm_title, + .raw = opts->raw, + .stack = opts->tramp_stack, + .direct_rcv = !opts->in_kernel } ); + return(data); +} + +/* Only changed by xterm_setup, which is a setup */ +static char *terminal_emulator = "xterm"; +static char *title_switch = "-T"; +static char *exec_switch = "-e"; + +static int __init xterm_setup(char *line, int *add) +{ + *add = 0; + terminal_emulator = line; + + line = strchr(line, ','); + if(line == NULL) return(0); + *line++ = '\0'; + if(*line) title_switch = line; + + line = strchr(line, ','); + if(line == NULL) return(0); + *line++ = '\0'; + if(*line) exec_switch = line; + + return(0); +} + +__uml_setup("xterm=", xterm_setup, +"xterm=,,<exec switch>\n" +" Specifies an alternate terminal emulator to use for the debugger,\n" +" consoles, and serial lines when they are attached to the xterm channel.\n" +" The values are the terminal emulator binary, the switch it uses to set\n" +" its title, and the switch it uses to execute a subprocess,\n" +" respectively. The title switch must have the form '<switch> title',\n" +" not '<switch>=title'. Similarly, the exec switch must have the form\n" +" '<switch> command arg1 arg2 ...'.\n" +" The default values are 'xterm=xterm,-T,-e'. Values for gnome-terminal\n" +" are 'xterm=gnome-terminal,-t,-x'.\n\n" +); + +/* XXX This badly needs some cleaning up in the error paths + * Not static because it's called directly by the tt mode gdb code + */ +int xterm_open(int input, int output, int primary, void *d, + char **dev_out) +{ + struct xterm_chan *data = d; + unsigned long stack; + int pid, fd, new, err; + char title[256], file[] = "/tmp/xterm-pipeXXXXXX"; + char *argv[] = { terminal_emulator, title_switch, title, exec_switch, + "/usr/lib/uml/port-helper", "-uml-socket", + file, NULL }; + + if(os_access(argv[4], OS_ACC_X_OK) < 0) + argv[4] = "port-helper"; + + /* Check that DISPLAY is set, this doesn't guarantee the xterm + * will work but w/o it we can be pretty sure it won't. */ + if (!getenv("DISPLAY")) { + printk("xterm_open: $DISPLAY not set.\n"); + return -ENODEV; + } + + fd = mkstemp(file); + if(fd < 0){ + printk("xterm_open : mkstemp failed, errno = %d\n", errno); + return(-errno); + } + + if(unlink(file)){ + printk("xterm_open : unlink failed, errno = %d\n", errno); + return(-errno); + } + os_close_file(fd); + + fd = os_create_unix_socket(file, sizeof(file), 1); + if(fd < 0){ + printk("xterm_open : create_unix_socket failed, errno = %d\n", + -fd); + return(fd); + } + + sprintf(title, data->title, data->device); + stack = data->stack; + pid = run_helper(NULL, NULL, argv, &stack); + if(pid < 0){ + printk("xterm_open : run_helper failed, errno = %d\n", -pid); + return(pid); + } + + if(data->stack == 0) free_stack(stack, 0); + + if (data->direct_rcv) { + new = os_rcv_fd(fd, &data->helper_pid); + } else { + err = os_set_fd_block(fd, 0); + if(err < 0){ + printk("xterm_open : failed to set descriptor " + "non-blocking, err = %d\n", -err); + return(err); + } + new = xterm_fd(fd, &data->helper_pid); + } + if(new < 0){ + printk("xterm_open : os_rcv_fd failed, err = %d\n", -new); + goto out; + } + + CATCH_EINTR(err = tcgetattr(new, &data->tt)); + if(err){ + new = err; + goto out; + } + + if(data->raw){ + err = raw(new); + if(err){ + new = err; + goto out; + } + } + + data->pid = pid; + *dev_out = NULL; + out: + unlink(file); + return(new); +} + +/* Not static because it's called directly by the tt mode gdb code */ +void xterm_close(int fd, void *d) +{ + struct xterm_chan *data = d; + + if(data->pid != -1) + os_kill_process(data->pid, 1); + data->pid = -1; + if(data->helper_pid != -1) + os_kill_process(data->helper_pid, 0); + data->helper_pid = -1; + os_close_file(fd); +} + +static void xterm_free(void *d) +{ + free(d); +} + +static int xterm_console_write(int fd, const char *buf, int n, void *d) +{ + struct xterm_chan *data = d; + + return(generic_console_write(fd, buf, n, &data->tt)); +} + +struct chan_ops xterm_ops = { + .type = "xterm", + .init = xterm_init, + .open = xterm_open, + .close = xterm_close, + .read = generic_read, + .write = generic_write, + .console_write = xterm_console_write, + .window_size = generic_window_size, + .free = xterm_free, + .winch = 1, +}; + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/xterm.h b/arch/um/drivers/xterm.h new file mode 100644 index 000000000000..f33a6e77b186 --- /dev/null +++ b/arch/um/drivers/xterm.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#ifndef __XTERM_H__ +#define __XTERM_H__ + +extern int xterm_fd(int socket, int *pid_out); + +#endif + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/xterm_kern.c b/arch/um/drivers/xterm_kern.c new file mode 100644 index 000000000000..7917b9d1cec8 --- /dev/null +++ b/arch/um/drivers/xterm_kern.c @@ -0,0 +1,93 @@ +/* + * Copyright (C) 2002 Jeff Dike (jdike@karaya.com) + * Licensed under the GPL + */ + +#include "linux/errno.h" +#include "linux/slab.h" +#include "linux/signal.h" +#include "linux/interrupt.h" +#include "asm/semaphore.h" +#include "asm/irq.h" +#include "irq_user.h" +#include "irq_kern.h" +#include "kern_util.h" +#include "os.h" +#include "xterm.h" + +struct xterm_wait { + struct completion ready; + int fd; + int pid; + int new_fd; +}; + +static irqreturn_t xterm_interrupt(int irq, void *data, struct pt_regs *regs) +{ + struct xterm_wait *xterm = data; + int fd; + + fd = os_rcv_fd(xterm->fd, &xterm->pid); + if(fd == -EAGAIN) + return(IRQ_NONE); + + xterm->new_fd = fd; + complete(&xterm->ready); + return(IRQ_HANDLED); +} + +int xterm_fd(int socket, int *pid_out) +{ + struct xterm_wait *data; + int err, ret; + + data = kmalloc(sizeof(*data), GFP_KERNEL); + if(data == NULL){ + printk(KERN_ERR "xterm_fd : failed to allocate xterm_wait\n"); + return(-ENOMEM); + } + + /* This is a locked semaphore... */ + *data = ((struct xterm_wait) + { .fd = socket, + .pid = -1, + .new_fd = -1 }); + init_completion(&data->ready); + + err = um_request_irq(XTERM_IRQ, socket, IRQ_READ, xterm_interrupt, + SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM, + "xterm", data); + if (err){ + printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, " + "err = %d\n", err); + ret = err; + goto out; + } + + /* ... so here we wait for an xterm interrupt. + * + * XXX Note, if the xterm doesn't work for some reason (eg. DISPLAY + * isn't set) this will hang... */ + wait_for_completion(&data->ready); + + free_irq_by_irq_and_dev(XTERM_IRQ, data); + free_irq(XTERM_IRQ, data); + + ret = data->new_fd; + *pid_out = data->pid; + out: + kfree(data); + + return(ret); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ -- cgit v1.2.3-58-ga151