From 18aecc2b645bbb07851b196452a2af314222069b Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 4 May 2011 14:38:26 -0400 Subject: arch/tile: finish enabling support for TILE-Gx 64-bit chip This support was partially present in the existing code (look for "__tilegx__" ifdefs) but with this change you can build a working kernel using the TILE-Gx toolchain and ARCH=tilegx. Most of these files are new, generally adding a foo_64.c file where previously there was just a foo_32.c file. The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx, using the existing SRCARCH mechanism in the top-level Makefile. Changes to existing files: - and changed to factor the include of in the common header. - and arch/tile/kernel/compat.c changed to remove the "const" markers I had put on compat_sys_execve() when trying to match some recent similar changes to the non-compat execve. It turns out the compat version wasn't "upgraded" to use const. - and were previously included accidentally, with the 32-bit contents. Now they have the proper 64-bit contents. Finally, I had to hack the existing hacky drivers/input/input-compat.h to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64). Signed-off-by: Chris Metcalf Acked-by: Dmitry Torokhov [drivers/input] --- arch/tile/mm/migrate_64.S | 187 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 arch/tile/mm/migrate_64.S (limited to 'arch/tile/mm') diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S new file mode 100644 index 000000000000..e76fea688beb --- /dev/null +++ b/arch/tile/mm/migrate_64.S @@ -0,0 +1,187 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * This routine is a helper for migrating the home of a set of pages to + * a new cpu. See the documentation in homecache.c for more information. + */ + +#include +#include +#include +#include +#include +#include +#include + + .text + +/* + * First, some definitions that apply to all the code in the file. + */ + +/* Locals (caller-save) */ +#define r_tmp r10 +#define r_save_sp r11 + +/* What we save where in the stack frame; must include all callee-saves. */ +#define FRAME_SP 8 +#define FRAME_R30 16 +#define FRAME_R31 24 +#define FRAME_R32 32 +#define FRAME_R33 40 +#define FRAME_SIZE 48 + + + + +/* + * On entry: + * + * r0 the new context PA to install (moved to r_context) + * r1 PTE to use for context access (moved to r_access) + * r2 ASID to use for new context (moved to r_asid) + * r3 pointer to cpumask with just this cpu set in it (r_my_cpumask) + */ + +/* Arguments (caller-save) */ +#define r_context_in r0 +#define r_access_in r1 +#define r_asid_in r2 +#define r_my_cpumask r3 + +/* Locals (callee-save); must not be more than FRAME_xxx above. */ +#define r_save_ics r30 +#define r_context r31 +#define r_access r32 +#define r_asid r33 + +/* + * Caller-save locals and frame constants are the same as + * for homecache_migrate_stack_and_flush. + */ + +STD_ENTRY(flush_and_install_context) + /* + * Create a stack frame; we can't touch it once we flush the + * cache until we install the new page table and flush the TLB. + */ + { + move r_save_sp, sp + st sp, lr + addi sp, sp, -FRAME_SIZE + } + addi r_tmp, sp, FRAME_SP + { + st r_tmp, r_save_sp + addi r_tmp, sp, FRAME_R30 + } + { + st r_tmp, r30 + addi r_tmp, sp, FRAME_R31 + } + { + st r_tmp, r31 + addi r_tmp, sp, FRAME_R32 + } + { + st r_tmp, r32 + addi r_tmp, sp, FRAME_R33 + } + st r_tmp, r33 + + /* Move some arguments to callee-save registers. */ + { + move r_context, r_context_in + move r_access, r_access_in + } + move r_asid, r_asid_in + + /* Disable interrupts, since we can't use our stack. */ + { + mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION + movei r_tmp, 1 + } + mtspr INTERRUPT_CRITICAL_SECTION, r_tmp + + /* First, flush our L2 cache. */ + { + move r0, zero /* cache_pa */ + moveli r1, hw2_last(HV_FLUSH_EVICT_L2) /* cache_control */ + } + { + shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2) + move r2, r_my_cpumask /* cache_cpumask */ + } + { + shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) + move r3, zero /* tlb_va */ + } + { + move r4, zero /* tlb_length */ + move r5, zero /* tlb_pgsize */ + } + { + move r6, zero /* tlb_cpumask */ + move r7, zero /* asids */ + } + { + move r8, zero /* asidcount */ + jal hv_flush_remote + } + bnez r0, 1f + + /* Now install the new page table. */ + { + move r0, r_context + move r1, r_access + } + { + move r2, r_asid + movei r3, HV_CTX_DIRECTIO + } + jal hv_install_context + bnez r0, 1f + + /* Finally, flush the TLB. */ + { + movei r0, 0 /* preserve_global */ + jal hv_flush_all + } + +1: /* Reset interrupts back how they were before. */ + mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics + + /* Restore the callee-saved registers and return. */ + addli lr, sp, FRAME_SIZE + { + ld lr, lr + addli r_tmp, sp, FRAME_R30 + } + { + ld r30, r_tmp + addli r_tmp, sp, FRAME_R31 + } + { + ld r31, r_tmp + addli r_tmp, sp, FRAME_R32 + } + { + ld r32, r_tmp + addli r_tmp, sp, FRAME_R33 + } + { + ld r33, r_tmp + addi sp, sp, FRAME_SIZE + } + jrp lr + STD_ENDPROC(flush_and_install_context) -- cgit v1.2.3-58-ga151