From 129622672d70711c6c844fb529381ff0dad9085a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Sat, 7 Apr 2012 17:10:17 -0400 Subject: arch/tile: tilegx PCI root complex support This change implements PCIe root complex support for tilegx using the kernel support layer for accessing the TRIO hardware shim. Reviewed-by: Bjorn Helgaas [changes in 07487f3] Signed-off-by: Chris Metcalf --- arch/tile/kernel/Makefile | 4 + arch/tile/kernel/pci_gx.c | 1544 +++++++++++++++++++++++++++++++++++++++++++++ arch/tile/kernel/setup.c | 6 + 3 files changed, 1554 insertions(+) create mode 100644 arch/tile/kernel/pci_gx.c (limited to 'arch/tile/kernel') diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index 5de99248d8df..49d4ce3cd7f4 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -14,4 +14,8 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel_$(BITS).o +ifdef CONFIG_TILEGX +obj-$(CONFIG_PCI) += pci_gx.o +else obj-$(CONFIG_PCI) += pci.o +endif diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c new file mode 100644 index 000000000000..1b996bb628f1 --- /dev/null +++ b/arch/tile/kernel/pci_gx.c @@ -0,0 +1,1544 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +/* + * Initialization flow and process + * ------------------------------- + * + * This files containes the routines to search for PCI buses, + * enumerate the buses, and configure any attached devices. + * + * There are two entry points here: + * 1) tile_pci_init + * This sets up the pci_controller structs, and opens the + * FDs to the hypervisor. This is called from setup_arch() early + * in the boot process. + * 2) pcibios_init + * This probes the PCI bus(es) for any attached hardware. It's + * called by subsys_initcall. All of the real work is done by the + * generic Linux PCI layer. + * + */ + +#define DEBUG_PCI_CFG 0 + +#if DEBUG_PCI_CFG +#define TRACE_CFG_WR(size, val, bus, dev, func, offset) \ + pr_info("CFG WR %d-byte VAL %#x to bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#define TRACE_CFG_RD(size, val, bus, dev, func, offset) \ + pr_info("CFG RD %d-byte VAL %#x from bus %d dev %d func %d addr %u\n", \ + size, val, bus, dev, func, offset & 0xFFF); +#else +#define TRACE_CFG_WR(...) +#define TRACE_CFG_RD(...) +#endif + +static int __devinitdata pci_probe = 1; + +/* Information on the PCIe RC ports configuration. */ +static int __devinitdata pcie_rc[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* + * On some platforms with one or more Gx endpoint ports, we need to + * delay the PCIe RC port probe for a few seconds to work around + * a HW PCIe link-training bug. The exact delay is specified with + * a kernel boot argument in the form of "pcie_rc_delay=T,P,S", + * where T is the TRIO instance number, P is the port number and S is + * the delay in seconds. If the delay is not provided, the value + * will be DEFAULT_RC_DELAY. + */ +static int __devinitdata rc_delay[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* Default number of seconds that the PCIe RC port probe can be delayed. */ +#define DEFAULT_RC_DELAY 10 + +/* Max number of seconds that the PCIe RC port probe can be delayed. */ +#define MAX_RC_DELAY 20 + +/* Array of the PCIe ports configuration info obtained from the BIB. */ +struct pcie_port_property pcie_ports[TILEGX_NUM_TRIO][TILEGX_TRIO_PCIES]; + +/* All drivers share the TRIO contexts defined here. */ +gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; + +/* Pointer to an array of PCIe RC controllers. */ +struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; +int num_rc_controllers; +static int num_ep_controllers; + +static struct pci_ops tile_cfg_ops; + +/* Mask of CPUs that should receive PCIe interrupts. */ +static struct cpumask intr_cpus_map; + +/* + * We don't need to worry about the alignment of resources. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} +EXPORT_SYMBOL(pcibios_align_resource); + + +/* + * Pick a CPU to receive and handle the PCIe interrupts, based on the IRQ #. + * For now, we simply send interrupts to non-dataplane CPUs. + * We may implement methods to allow user to specify the target CPUs, + * e.g. via boot arguments. + */ +static int tile_irq_cpu(int irq) +{ + unsigned int count; + int i = 0; + int cpu; + + count = cpumask_weight(&intr_cpus_map); + if (unlikely(count == 0)) { + pr_warning("intr_cpus_map empty, interrupts will be" + " delievered to dataplane tiles\n"); + return irq % (smp_height * smp_width); + } + + count = irq % count; + for_each_cpu(cpu, &intr_cpus_map) { + if (i++ == count) + break; + } + return cpu; +} + +/* + * Open a file descriptor to the TRIO shim. + */ +static int __devinit tile_pcie_open(int trio_index) +{ + gxio_trio_context_t *context = &trio_contexts[trio_index]; + int ret; + + /* + * This opens a file descriptor to the TRIO shim. + */ + ret = gxio_trio_init(context, trio_index); + if (ret < 0) + return ret; + + /* + * Allocate an ASID for the kernel. + */ + ret = gxio_trio_alloc_asids(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: ASID alloc failure on TRIO %d, give up\n", + trio_index); + goto asid_alloc_failure; + } + + context->asid = ret; + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + /* + * Alloc a PIO region for config access, shared by all MACs per TRIO. + * This shouldn't fail since the kernel is supposed to the first + * client of the TRIO's PIO regions. + */ + ret = gxio_trio_alloc_pio_regions(context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: CFG PIO alloc failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } + + context->pio_cfg_index = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. The mac parameter + * is also 0 because it is specified in PIO_REGION_SETUP_CFG_ADDR. + */ + ret = gxio_trio_init_pio_region_aux(context, context->pio_cfg_index, + 0, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: CFG PIO init failure on TRIO %d, give up\n", + trio_index); + goto pio_alloc_failure; + } +#endif + + return ret; + +asid_alloc_failure: +#ifdef USE_SHARED_PCIE_CONFIG_REGION +pio_alloc_failure: +#endif + hv_dev_close(context->fd); + + return ret; +} + +static void +tilegx_legacy_irq_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_mask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_legacy_irq_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); +} + +static struct irq_chip tilegx_legacy_irq_chip = { + .name = "tilegx_legacy_irq", + .irq_ack = tilegx_legacy_irq_ack, + .irq_mask = tilegx_legacy_irq_mask, + .irq_unmask = tilegx_legacy_irq_unmask, + + /* TBD: support set_affinity. */ +}; + +/* + * This is a wrapper function of the kernel level-trigger interrupt + * handler handle_level_irq() for PCI legacy interrupts. The TRIO + * is configured such that only INTx Assert interrupts are proxied + * to Linux which just calls handle_level_irq() after clearing the + * MAC INTx Assert status bit associated with this interrupt. + */ +static void +trio_handle_level_irq(unsigned int irq, struct irq_desc *desc) +{ + struct pci_controller *controller = irq_desc_get_handler_data(desc); + gxio_trio_context_t *trio_context = controller->trio; + uint64_t intx = (uint64_t)irq_desc_get_chip_data(desc); + int mac = controller->mac; + unsigned int reg_offset; + uint64_t level_mask; + + handle_level_irq(irq, desc); + + /* + * Clear the INTx Level status, otherwise future interrupts are + * not sent. + */ + reg_offset = (TRIO_PCIE_INTFC_MAC_INT_STS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + level_mask = TRIO_PCIE_INTFC_MAC_INT_STS__INT_LEVEL_MASK << intx; + + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, level_mask); +} + +/* + * Create kernel irqs and set up the handlers for the legacy interrupts. + * Also some minimum initialization for the MSI support. + */ +static int __devinit tile_init_irqs(struct pci_controller *controller) +{ + int i; + int j; + int irq; + int result; + + cpumask_copy(&intr_cpus_map, cpu_online_mask); + + + for (i = 0; i < 4; i++) { + gxio_trio_context_t *context = controller->trio; + int cpu; + + /* Ask the kernel to allocate an IRQ. */ + irq = create_irq(); + if (irq < 0) { + pr_err("PCI: no free irq vectors, failed for %d\n", i); + + goto free_irqs; + } + controller->irq_intx_table[i] = irq; + + /* Distribute the 4 IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* Configure the TRIO intr binding for this IRQ. */ + result = gxio_trio_config_legacy_intr(context, cpu_x(cpu), + cpu_y(cpu), KERNEL_PL, + irq, controller->mac, i); + if (result < 0) { + pr_err("PCI: MAC intx config failed for %d\n", i); + + goto free_irqs; + } + + /* + * Register the IRQ handler with the kernel. + */ + irq_set_chip_and_handler(irq, &tilegx_legacy_irq_chip, + trio_handle_level_irq); + irq_set_chip_data(irq, (void *)(uint64_t)i); + irq_set_handler_data(irq, controller); + } + + return 0; + +free_irqs: + for (j = 0; j < i; j++) + destroy_irq(controller->irq_intx_table[j]); + + return -1; +} + +/* + * First initialization entry point, called from setup_arch(). + * + * Find valid controllers and fill in pci_controller structs for each + * of them. + * + * Returns the number of controllers discovered. + */ +int __init tile_pci_init(void) +{ + int num_trio_shims = 0; + int ctl_index = 0; + int i, j; + + if (!pci_probe) { + pr_info("PCI: disabled by boot argument\n"); + return 0; + } + + pr_info("PCI: Searching for controllers...\n"); + + /* + * We loop over all the TRIO shims. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + int ret; + + ret = tile_pcie_open(i); + if (ret < 0) + continue; + + num_trio_shims++; + } + + if (num_trio_shims == 0 || sim_is_simulator()) + return 0; + + /* + * Now determine which PCIe ports are configured to operate in RC mode. + * We look at the Board Information Block first and then see if there + * are any overriding configuration by the HW strapping pin. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + int ret; + + if (context->fd < 0) + continue; + + ret = hv_dev_pread(context->fd, 0, + (HV_VirtAddr)&pcie_ports[i][0], + sizeof(struct pcie_port_property) * TILEGX_TRIO_PCIES, + GXIO_TRIO_OP_GET_PORT_PROPERTY); + if (ret < 0) { + pr_err("PCI: PCIE_GET_PORT_PROPERTY failure, error %d," + " on TRIO %d\n", ret, i); + continue; + } + + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_ports[i][j].allow_rc) { + pcie_rc[i][j] = 1; + num_rc_controllers++; + } + else if (pcie_ports[i][j].allow_ep) { + num_ep_controllers++; + } + } + } + + /* + * Return if no PCIe ports are configured to operate in RC mode. + */ + if (num_rc_controllers == 0) + return 0; + + /* + * Set the TRIO pointer and MAC index for each PCIe RC port. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + for (j = 0; j < TILEGX_TRIO_PCIES; j++) { + if (pcie_rc[i][j]) { + pci_controllers[ctl_index].trio = + &trio_contexts[i]; + pci_controllers[ctl_index].mac = j; + pci_controllers[ctl_index].trio_index = i; + ctl_index++; + if (ctl_index == num_rc_controllers) + goto out; + } + } + } + +out: + /* + * Configure each PCIe RC port. + */ + for (i = 0; i < num_rc_controllers; i++) { + /* + * Configure the PCIe MAC to run in RC mode. + */ + + struct pci_controller *controller = &pci_controllers[i]; + + controller->index = i; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; + + } + + return num_rc_controllers; +} + +/* + * (pin - 1) converts from the PCI standard's [1:4] convention to + * a normal [0:3] range. + */ +static int tile_map_irq(const struct pci_dev *dev, u8 device, u8 pin) +{ + struct pci_controller *controller = + (struct pci_controller *)dev->sysdata; + return controller->irq_intx_table[pin - 1]; +} + + +static void __devinit fixup_read_and_payload_sizes(struct pci_controller * + controller) +{ + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = controller->root_bus; + TRIO_PCIE_RC_DEVICE_CONTROL_t dev_control; + TRIO_PCIE_RC_DEVICE_CAP_t rc_dev_cap; + unsigned int reg_offset; + struct pci_bus *child; + int mac; + int err; + + mac = controller->mac; + + /* + * Set our max read request size to be 4KB. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + dev_control.max_read_req_sz = 5; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + dev_control.word); + + /* + * Set the max payload size supported by this Gx PCIe MAC. + * Though Gx PCIe supports Max Payload Size of up to 1024 bytes, + * experiments have shown that setting MPS to 256 yields the + * best performance. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CAP << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + rc_dev_cap.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + rc_dev_cap.mps_sup = 1; + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + rc_dev_cap.word); + + /* Configure PCI Express MPS setting. */ + list_for_each_entry(child, &root_bus->children, node) { + struct pci_dev *self = child->self; + if (!self) + continue; + + pcie_bus_configure_settings(child, self->pcie_mpss); + } + + /* + * Set the mac_config register in trio based on the MPS/MRS of the link. + */ + reg_offset = + (TRIO_PCIE_RC_DEVICE_CONTROL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + dev_control.word = __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + + err = gxio_trio_set_mps_mrs(trio_context, + dev_control.max_payload_size, + dev_control.max_read_req_sz, + mac); + if (err < 0) { + pr_err("PCI: PCIE_CONFIGURE_MAC_MPS_MRS failure, " + "MAC %d on TRIO %d\n", + mac, controller->trio_index); + } +} + +static int __devinit setup_pcie_rc_delay(char *str) +{ + unsigned long delay = 0; + unsigned long trio_index; + unsigned long mac; + + if (str == NULL || !isdigit(*str)) + return -EINVAL; + trio_index = simple_strtoul(str, (char **)&str, 10); + if (trio_index >= TILEGX_NUM_TRIO) + return -EINVAL; + + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + mac = simple_strtoul(str, (char **)&str, 10); + if (mac >= TILEGX_TRIO_PCIES) + return -EINVAL; + + if (*str != '\0') { + if (*str != ',') + return -EINVAL; + + str++; + if (!isdigit(*str)) + return -EINVAL; + delay = simple_strtoul(str, (char **)&str, 10); + if (delay > MAX_RC_DELAY) + return -EINVAL; + } + + rc_delay[trio_index][mac] = delay ? : DEFAULT_RC_DELAY; + pr_info("Delaying PCIe RC link training for %u sec" + " on MAC %lu on TRIO %lu\n", rc_delay[trio_index][mac], + mac, trio_index); + return 0; +} +early_param("pcie_rc_delay", setup_pcie_rc_delay); + +/* + * Second PCI initialization entry point, called by subsys_initcall. + * + * The controllers have been set up by the time we get here, by a call to + * tile_pci_init. + */ +int __init pcibios_init(void) +{ + resource_size_t offset; + LIST_HEAD(resources); + int i; + + if (num_rc_controllers == 0 && num_ep_controllers == 0) + return 0; + + pr_info("PCI: Probing PCI hardware\n"); + + /* + * We loop over all the TRIO shims and set up the MMIO mappings. + * This step can't be done in tile_pci_init because the MM subsystem + * hasn't been initialized then. + */ + for (i = 0; i < TILEGX_NUM_TRIO; i++) { + gxio_trio_context_t *context = &trio_contexts[i]; + + if (context->fd < 0) + continue; + + /* + * Map in the MMIO space for the MAC. + */ + offset = 0; + context->mmio_base_mac = + iorpc_ioremap(context->fd, offset, + HV_TRIO_CONFIG_IOREMAP_SIZE); + if (context->mmio_base_mac == NULL) { + pr_err("PCI: MAC map failure on TRIO %d\n", i); + + hv_dev_close(context->fd); + context->fd = -1; + continue; + } + } + + /* + * Delay a bit in case devices aren't ready. Some devices are + * known to require at least 20ms here, but we use a more + * conservative value. + */ + msleep(250); + + /* Scan all of the recorded PCI controllers. */ + for (i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + TRIO_PCIE_INTFC_PORT_CONFIG_t port_config; + TRIO_PCIE_INTFC_PORT_STATUS_t port_status; + TRIO_PCIE_INTFC_TX_FIFO_CTL_t tx_fifo_ctl; + struct pci_bus *bus; + unsigned int reg_offset; + unsigned int class_code_revision; + int trio_index; + int mac; +#ifndef USE_SHARED_PCIE_CONFIG_REGION + int ret; +#endif + + if (trio_context->fd < 0) + continue; + + trio_index = controller->trio_index; + mac = controller->mac; + + /* + * Check the port strap state which will override the BIB + * setting. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_CONFIG << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_config.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + + if ((port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC) && + (port_config.strap_state != + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_RC_G1)) { + /* + * If this is really intended to be an EP port, + * record it so that the endpoint driver will know about it. + */ + if (port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT || + port_config.strap_state == + TRIO_PCIE_INTFC_PORT_CONFIG__STRAP_STATE_VAL_AUTO_CONFIG_ENDPOINT_G1) + pcie_ports[trio_index][mac].allow_ep = 1; + + continue; + } + + /* + * Delay the RC link training if needed. + */ + if (rc_delay[trio_index][mac]) + msleep(rc_delay[trio_index][mac] * 1000); + + ret = gxio_trio_force_rc_link_up(trio_context, mac); + if (ret < 0) + pr_err("PCI: PCIE_FORCE_LINK_UP failure, " + "MAC %d on TRIO %d\n", mac, trio_index); + + pr_info("PCI: Found PCI controller #%d on TRIO %d MAC %d\n", i, + trio_index, controller->mac); + + /* + * Wait a bit here because some EP devices take longer + * to come up. + */ + msleep(1000); + + /* + * Check for PCIe link-up status. + */ + + reg_offset = + (TRIO_PCIE_INTFC_PORT_STATUS << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + port_status.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + if (!port_status.dl_up) { + pr_err("PCI: link is down, MAC %d on TRIO %d\n", + mac, trio_index); + continue; + } + + /* + * Ensure that the link can come out of L1 power down state. + * Strictly speaking, this is needed only in the case of + * heavy RC-initiated DMAs. + */ + reg_offset = + (TRIO_PCIE_INTFC_TX_FIFO_CTL << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_INTERFACE << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + tx_fifo_ctl.word = + __gxio_mmio_read(trio_context->mmio_base_mac + + reg_offset); + tx_fifo_ctl.min_p_credits = 0; + __gxio_mmio_write(trio_context->mmio_base_mac + reg_offset, + tx_fifo_ctl.word); + + /* + * Change the device ID so that Linux bus crawl doesn't confuse + * the internal bridge with any Tilera endpoints. + */ + + reg_offset = + (TRIO_PCIE_RC_DEVICE_ID_VEN_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, + (TILERA_GX36_RC_DEV_ID << + TRIO_PCIE_RC_DEVICE_ID_VEN_ID__DEV_ID_SHIFT) | + TILERA_VENDOR_ID); + + /* + * Set the internal P2P bridge class code. + */ + + reg_offset = + (TRIO_PCIE_RC_REVISION_ID << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_STANDARD << + TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (mac << TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + class_code_revision = + __gxio_mmio_read32(trio_context->mmio_base_mac + + reg_offset); + class_code_revision = (class_code_revision & 0xff ) | + (PCI_CLASS_BRIDGE_PCI << 16); + + __gxio_mmio_write32(trio_context->mmio_base_mac + + reg_offset, class_code_revision); + +#ifdef USE_SHARED_PCIE_CONFIG_REGION + + /* + * Map in the MMIO space for the PIO region. + */ + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#else + + /* + * Alloc a PIO region for PCI config access per MAC. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO alloc failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + trio_context->pio_cfg_index[mac] = ret; + + /* + * For PIO CFG, the bus_address_hi parameter is 0. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + trio_context->pio_cfg_index[mac], + mac, 0, HV_TRIO_PIO_FLAG_CONFIG_SPACE); + if (ret < 0) { + pr_err("PCI: PCI CFG PIO init failure for mac %d " + "on TRIO %d, give up\n", mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + offset = HV_TRIO_PIO_OFFSET(trio_context->pio_cfg_index[mac]) | + (((unsigned long long)mac) << + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT); + +#endif + + trio_context->mmio_base_pio_cfg[mac] = + iorpc_ioremap(trio_context->fd, offset, + (1 << TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR__MAC_SHIFT)); + if (trio_context->mmio_base_pio_cfg[mac] == NULL) { + pr_err("PCI: PIO map failure for mac %d on TRIO %d\n", + mac, trio_index); + + /* TBD: cleanup ... */ + + continue; + } + + /* + * Initialize the PCIe interrupts. + */ + if (tile_init_irqs(controller)) { + pr_err("PCI: IRQs init failure for mac %d on TRIO %d\n", + mac, trio_index); + + continue; + } + + pci_add_resource(&resources, &iomem_resource); + bus = pci_scan_root_bus(NULL, 0, controller->ops, + controller, &resources); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + + } + + /* Do machine dependent PCI interrupt routing */ + pci_fixup_irqs(pci_common_swizzle, tile_map_irq); + + /* + * This comes from the generic Linux PCI driver. + * + * It allocates all of the resources (I/O memory, etc) + * associated with the devices read in above. + */ + + pci_assign_unassigned_resources(); + + /* Record the I/O resources in the PCI controller structure. */ + for (i = 0; i < num_rc_controllers; i++) { + struct pci_controller *controller = &pci_controllers[i]; + gxio_trio_context_t *trio_context = controller->trio; + struct pci_bus *root_bus = pci_controllers[i].root_bus; + struct pci_bus *next_bus; + uint32_t bus_address_hi; + struct pci_dev *dev; + int ret; + int j; + + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (root_bus == NULL) + continue; + + /* Configure the max_payload_size values for this domain. */ + fixup_read_and_payload_sizes(controller); + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* Find the PCI host controller, ie. the 1st bridge. */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + pci_controllers[i].mem_resources[0] = + *next_bus->resource[0]; + pci_controllers[i].mem_resources[1] = + *next_bus->resource[1]; + pci_controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + break; + } + } + + if (pci_controllers[i].mem_resources[1].flags & IORESOURCE_MEM) + bus_address_hi = + pci_controllers[i].mem_resources[1].start >> 32; + else if (pci_controllers[i].mem_resources[2].flags & IORESOURCE_PREFETCH) + bus_address_hi = + pci_controllers[i].mem_resources[2].start >> 32; + else { + /* This is unlikely. */ + pr_err("PCI: no memory resources on TRIO %d mac %d\n", + controller->trio_index, controller->mac); + continue; + } + + /* + * We always assign 32-bit PCI bus BAR ranges. + */ + BUG_ON(bus_address_hi != 0); + + /* + * Alloc a PIO region for PCI memory access for each RC port. + */ + ret = gxio_trio_alloc_pio_regions(trio_context, 1, 0, 0); + if (ret < 0) { + pr_err("PCI: MEM PIO alloc failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + /* TBD: cleanup ... */ + + continue; + } + + controller->pio_mem_index = ret; + + /* + * For PIO MEM, the bus_address_hi parameter is hard-coded 0 + * because we always assign 32-bit PCI bus BAR ranges. + */ + ret = gxio_trio_init_pio_region_aux(trio_context, + controller->pio_mem_index, + controller->mac, + bus_address_hi, + 0); + if (ret < 0) { + pr_err("PCI: MEM PIO init failure on TRIO %d mac %d, " + "give up\n", controller->trio_index, + controller->mac); + + /* TBD: cleanup ... */ + + continue; + } + + /* + * Configure a Mem-Map region for each memory controller so + * that Linux can map all of its PA space to the PCI bus. + * Use the IOMMU to handle hash-for-home memory. + */ + for_each_online_node(j) { + unsigned long start_pfn = node_start_pfn[j]; + unsigned long end_pfn = node_end_pfn[j]; + unsigned long nr_pages = end_pfn - start_pfn; + + ret = gxio_trio_alloc_memory_maps(trio_context, 1, 0, + 0); + if (ret < 0) { + pr_err("PCI: Mem-Map alloc failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + /* TBD: cleanup ... */ + + goto alloc_mem_map_failed; + } + + controller->mem_maps[j] = ret; + + /* + * Initialize the Mem-Map and the I/O MMU so that all + * the physical memory can be accessed by the endpoint + * devices. The base bus address is set to the base CPA + * of this memory controller, so is the base VA. The + * I/O MMU table essentially translates the CPA to + * the real PA. + */ + ret = gxio_trio_init_memory_map_mmu_aux(trio_context, + controller->mem_maps[j], + start_pfn << PAGE_SHIFT, + nr_pages << PAGE_SHIFT, + trio_context->asid, + controller->mac, + start_pfn << PAGE_SHIFT, + j, + GXIO_TRIO_ORDER_MODE_UNORDERED); + if (ret < 0) { + pr_err("PCI: Mem-Map init failure on TRIO %d " + "mac %d for MC %d, give up\n", + controller->trio_index, + controller->mac, j); + + /* TBD: cleanup ... */ + + goto alloc_mem_map_failed; + } + + continue; + +alloc_mem_map_failed: + break; + } + + } + + return 0; +} +subsys_initcall(pcibios_init); + +/* + * No bus fixups needed. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + /* Nothing needs to be done. */ +} + +/* + * This can be called from the generic PCI layer, but doesn't need to + * do anything. + */ +char __devinit *pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + return str; +} + +/* + * This is called from the generic Linux layer. + */ +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * Enable memory address decoding, as appropriate, for the + * device described by the 'dev' struct. The I/O decoding + * is disabled, though the TILE-Gx supports I/O addressing. + * + * This is called from the generic PCI layer, and can be called + * for bridges or endpoints. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + return pci_enable_resources(dev, mask); +} + +/* Map a PCI MMIO bus address into VA space. */ +void __iomem *ioremap(resource_size_t phys_addr, unsigned long size) +{ + struct pci_controller *controller = NULL; + resource_size_t bar_start; + resource_size_t bar_end; + resource_size_t offset; + resource_size_t start; + resource_size_t end; + int trio_fd; + int i, j; + + start = phys_addr; + end = phys_addr + size - 1; + + /* + * In the following, each PCI controller's mem_resources[1] + * represents its (non-prefetchable) PCI memory resource and + * mem_resources[2] refers to its prefetchable PCI memory resource. + * By searching phys_addr in each controller's mem_resources[], we can + * determine the controller that should accept the PCI memory access. + */ + + for (i = 0; i < num_rc_controllers; i++) { + /* + * Skip controllers that are not properly initialized or + * have down links. + */ + if (pci_controllers[i].root_bus == NULL) + continue; + + for (j = 1; j < 3; j++) { + bar_start = + pci_controllers[i].mem_resources[j].start; + bar_end = + pci_controllers[i].mem_resources[j].end; + + if ((start >= bar_start) && (end <= bar_end)) { + + controller = &pci_controllers[i]; + + goto got_it; + } + } + } + + if (controller == NULL) + return NULL; + +got_it: + trio_fd = controller->trio->fd; + + offset = HV_TRIO_PIO_OFFSET(controller->pio_mem_index) + phys_addr; + + /* + * We need to keep the PCI bus address's in-page offset in the VA. + */ + return iorpc_ioremap(trio_fd, offset, size) + + (phys_addr & (PAGE_SIZE - 1)); +} +EXPORT_SYMBOL(ioremap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +/**************************************************************** + * + * Tile PCI config space read/write routines + * + ****************************************************************/ + +/* + * These are the normal read and write ops + * These are expanded with macros from pci_bus_read_config_byte() etc. + * + * devfn is the combined PCI device & function. + * + * offset is in bytes, from the start of config space for the + * specified bus & device. + */ + +static int __devinit tile_cfg_read(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 *val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + + /* + * Map all accesses to the local device (bus == 0) into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (busnum == 0) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device (bus == 1) have to be + * sent as type-0 configs. + */ + + if (busnum == 1) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + *val = __gxio_mmio_read32(mmio_addr); + break; + + case 2: + *val = __gxio_mmio_read16(mmio_addr); + break; + + case 1: + *val = __gxio_mmio_read8(mmio_addr); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + TRACE_CFG_RD(size, *val, busnum, device, function, offset); + + return 0; + +invalid_device: + + switch (size) { + case 4: + *val = 0xFFFFFFFF; + break; + + case 2: + *val = 0xFFFF; + break; + + case 1: + *val = 0xFF; + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + + return 0; +} + + +/* + * See tile_cfg_read() for relevent comments. + * Note that "val" is the value to write, not a pointer to that value. + */ +static int __devinit tile_cfg_write(struct pci_bus *bus, + unsigned int devfn, + int offset, + int size, + u32 val) +{ + struct pci_controller *controller = bus->sysdata; + gxio_trio_context_t *trio_context = controller->trio; + int busnum = bus->number & 0xff; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + int config_type = 1; + TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR_t cfg_addr; + void *mmio_addr; + u32 val_32 = (u32)val; + u16 val_16 = (u16)val; + u8 val_8 = (u8)val; + + /* + * Map all accesses to the local device (bus == 0) into the + * MMIO space of the MAC. Accesses to the downstream devices + * go to the PIO space. + */ + if (busnum == 0) { + if (device == 0) { + /* + * This is the internal downstream P2P bridge, + * access directly. + */ + unsigned int reg_offset; + + reg_offset = ((offset & 0xFFF) << + TRIO_CFG_REGION_ADDR__REG_SHIFT) | + (TRIO_CFG_REGION_ADDR__INTFC_VAL_MAC_PROTECTED + << TRIO_CFG_REGION_ADDR__INTFC_SHIFT ) | + (controller->mac << + TRIO_CFG_REGION_ADDR__MAC_SEL_SHIFT); + + mmio_addr = trio_context->mmio_base_mac + reg_offset; + + goto valid_device; + + } else { + /* + * We fake an empty device for (device > 0), + * since there is only one device on bus 0. + */ + goto invalid_device; + } + } + + /* + * Accesses to the directly attached device (bus == 1) have to be + * sent as type-0 configs. + */ + + if (busnum == 1) { + /* + * There is only one device off of our built-in P2P bridge. + */ + if (device != 0) + goto invalid_device; + + config_type = 0; + } + + cfg_addr.word = 0; + cfg_addr.reg_addr = (offset & 0xFFF); + cfg_addr.fn = function; + cfg_addr.dev = device; + cfg_addr.bus = busnum; + cfg_addr.type = config_type; + + /* + * Note that we don't set the mac field in cfg_addr because the + * mapping is per port. + */ + + mmio_addr = trio_context->mmio_base_pio_cfg[controller->mac] + + cfg_addr.word; + +valid_device: + + switch (size) { + case 4: + __gxio_mmio_write32(mmio_addr, val_32); + TRACE_CFG_WR(size, val_32, busnum, device, function, offset); + break; + + case 2: + __gxio_mmio_write16(mmio_addr, val_16); + TRACE_CFG_WR(size, val_16, busnum, device, function, offset); + break; + + case 1: + __gxio_mmio_write8(mmio_addr, val_8); + TRACE_CFG_WR(size, val_8, busnum, device, function, offset); + break; + + default: + return PCIBIOS_FUNC_NOT_SUPPORTED; + } + +invalid_device: + + return 0; +} + + +static struct pci_ops tile_cfg_ops = { + .read = tile_cfg_read, + .write = tile_cfg_write, +}; + + +/* + * MSI support starts here. + */ +static unsigned int +tilegx_msi_startup(struct irq_data *d) +{ + if (d->msi_desc) + unmask_msi_irq(d); + + return 0; +} + +static void +tilegx_msi_ack(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_EVENT_RESET_K, 1UL << d->irq); +} + +static void +tilegx_msi_mask(struct irq_data *d) +{ + mask_msi_irq(d); + __insn_mtspr(SPR_IPI_MASK_SET_K, 1UL << d->irq); +} + +static void +tilegx_msi_unmask(struct irq_data *d) +{ + __insn_mtspr(SPR_IPI_MASK_RESET_K, 1UL << d->irq); + unmask_msi_irq(d); +} + +static struct irq_chip tilegx_msi_chip = { + .name = "tilegx_msi", + .irq_startup = tilegx_msi_startup, + .irq_ack = tilegx_msi_ack, + .irq_mask = tilegx_msi_mask, + .irq_unmask = tilegx_msi_unmask, + + /* TBD: support set_affinity. */ +}; + +int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) +{ + struct pci_controller *controller; + gxio_trio_context_t *trio_context; + struct msi_msg msg; + int default_irq; + uint64_t mem_map_base; + uint64_t mem_map_limit; + u64 msi_addr; + int mem_map; + int cpu; + int irq; + int ret; + + irq = create_irq(); + if (irq < 0) + return irq; + + /* + * Since we use a 64-bit Mem-Map to accept the MSI write, we fail + * devices that are not capable of generating a 64-bit message address. + * These devices will fall back to using the legacy interrupts. + * Most PCIe endpoint devices do support 64-bit message addressing. + */ + if (desc->msi_attrib.is_64 == 0) { + dev_printk(KERN_INFO, &pdev->dev, + "64-bit MSI message address not supported, " + "falling back to legacy interrupts.\n"); + + ret = -ENOMEM; + goto is_64_failure; + } + + default_irq = desc->msi_attrib.default_irq; + controller = irq_get_handler_data(default_irq); + + BUG_ON(!controller); + + trio_context = controller->trio; + + /* + * Allocate the Mem-Map that will accept the MSI write and + * trigger the TILE-side interrupts. + */ + mem_map = gxio_trio_alloc_memory_maps(trio_context, 1, 0, 0); + if (mem_map < 0) { + dev_printk(KERN_INFO, &pdev->dev, + "%s Mem-Map alloc failure. " + "Failed to initialize MSI interrupts. " + "Falling back to legacy interrupts.\n", + desc->msi_attrib.is_msix ? "MSI-X" : "MSI"); + + ret = -ENOMEM; + goto msi_mem_map_alloc_failure; + } + + /* We try to distribute different IRQs to different tiles. */ + cpu = tile_irq_cpu(irq); + + /* + * Now call up to the HV to configure the Mem-Map interrupt and + * set up the IPI binding. + */ + mem_map_base = MEM_MAP_INTR_REGIONS_BASE + + mem_map * MEM_MAP_INTR_REGION_SIZE; + mem_map_limit = mem_map_base + MEM_MAP_INTR_REGION_SIZE - 1; + + ret = gxio_trio_config_msi_intr(trio_context, cpu_x(cpu), cpu_y(cpu), + KERNEL_PL, irq, controller->mac, + mem_map, mem_map_base, mem_map_limit, + trio_context->asid); + if (ret < 0) { + dev_printk(KERN_INFO, &pdev->dev, "HV MSI config failed.\n"); + + goto hv_msi_config_failure; + } + + irq_set_msi_desc(irq, desc); + + msi_addr = mem_map_base + TRIO_MAP_MEM_REG_INT3 - TRIO_MAP_MEM_REG_INT0; + + msg.address_hi = msi_addr >> 32; + msg.address_lo = msi_addr & 0xffffffff; + + msg.data = mem_map; + + write_msi_msg(irq, &msg); + irq_set_chip_and_handler(irq, &tilegx_msi_chip, handle_level_irq); + irq_set_handler_data(irq, controller); + + return 0; + +hv_msi_config_failure: + /* Free mem-map */ +msi_mem_map_alloc_failure: +is_64_failure: + destroy_irq(irq); + return ret; +} + +void arch_teardown_msi_irq(unsigned int irq) +{ + destroy_irq(irq); +} diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index dd87f3420390..6d179dfcc15e 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -1344,6 +1344,7 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_PCI +#if !defined (__tilegx__) /* * Initialize the PCI structures. This is done before memory * setup so that we know whether or not a pci_reserve region @@ -1351,6 +1352,7 @@ void __init setup_arch(char **cmdline_p) */ if (tile_pci_init() == 0) pci_reserve_mb = 0; +#endif /* PCI systems reserve a region just below 4GB for mapping iomem. */ pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT)); @@ -1379,6 +1381,10 @@ void __init setup_arch(char **cmdline_p) setup_cpu(1); setup_clock(); load_hv_initrd(); + +#if defined(CONFIG_PCI) && defined (__tilegx__) + tile_pci_init(); +#endif } -- cgit v1.2.3-58-ga151