From 221fe3a4be6aa742693f3a82824235c82d41846f Mon Sep 17 00:00:00 2001 From: Joachim Foerster Date: Thu, 8 Nov 2007 03:14:15 +1100 Subject: [POWERPC] Xilinx: Register AC97 Controller Reference with the platform bus Add AC97 platform bus registration for Xilinx Virtex platforms. Signed-off-by: Joachim Foerster Signed-off-by: Grant Likely Signed-off-by: Josh Boyer --- arch/ppc/syslib/virtex_devices.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'arch/ppc') diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c index ace4ec08de51..f658ff3b3890 100644 --- a/arch/ppc/syslib/virtex_devices.c +++ b/arch/ppc/syslib/virtex_devices.c @@ -87,6 +87,29 @@ }, \ } +#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \ + .name = "ml403_ac97cr", \ + .id = num, \ + .num_resources = 3, \ + .resource = (struct resource[]) { \ + { \ + .start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \ + .end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \ + .end = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_PLAYBACK_INTERRUPT_INTR, \ + .flags = IORESOURCE_IRQ, \ + }, \ + { \ + .start = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \ + .end = XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_##num##_RECORD_INTERRUPT_INTR, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ +} + /* UART 8250 driver platform data table */ struct plat_serial8250_port virtex_serial_platform_data[] = { #if defined(XPAR_UARTNS550_0_BASEADDR) @@ -173,6 +196,14 @@ struct platform_device virtex_platform_devices[] = { #if defined(XPAR_TFT_3_BASEADDR) XPAR_TFT(3), #endif + + /* AC97 Controller Reference instances */ +#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR) + XPAR_AC97_CONTROLLER_REFERENCE(0), +#endif +#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR) + XPAR_AC97_CONTROLLER_REFERENCE(1), +#endif }; /* Early serial support functions */ -- cgit v1.2.3-58-ga151 From 2ae24c521a9793e36b1a2311fa64915c2e7b1b7b Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Thu, 8 Nov 2007 09:22:48 +1100 Subject: [POWERPC] 4xx: balance ioremap/ioumap calls for Yucca Call iounmap before returning from an error case. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Josh Boyer --- arch/ppc/platforms/4xx/yucca.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/ppc') diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c index a83b0baea011..66a44ff0d926 100644 --- a/arch/ppc/platforms/4xx/yucca.c +++ b/arch/ppc/platforms/4xx/yucca.c @@ -211,6 +211,7 @@ static void __init yucca_setup_pcie_fpga_rootpoint(int port) break; default: + iounmap(pcie_reg_fpga_base); return; } -- cgit v1.2.3-58-ga151 From 3d1d662ef423adf6947a37e230f4d7e8ed7c9544 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Sat, 17 Nov 2007 04:29:56 +1100 Subject: [POWERPC] 4xx: Use virtual PVR value to init FPU on arch/ppc 440EP This fixes arch/ppc 440EP platforms to setup the FPU correctly. A virtual PVR is used, as 440GR platforms share an identical hardware PVR value and do not have an FPU. Signed-off-by: Josh Boyer --- arch/ppc/kernel/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/ppc') diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index aac88c2f3db9..5255bd80aa6b 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -312,7 +312,14 @@ early_init(int r3, int r4, int r5) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ +#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU) + /* We pass the virtual PVR here for 440EP as 440EP and 440GR have + * identical PVRs and there is no reliable way to check for the FPU + */ + spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8)); +#else spec = identify_cpu(offset, mfspr(SPRN_PVR)); +#endif do_feature_fixups(spec->cpu_features, PTRRELOC(&__start___ftr_fixup), PTRRELOC(&__stop___ftr_fixup)); -- cgit v1.2.3-58-ga151