From 035ee4282dc5ad19f0141821511346b8de1839af Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 21 Dec 2007 15:39:36 +1100 Subject: [POWERPC] 4xx: PCI-E Link setup improvements This improves the way the 4xx PCI-E code handles checking for a link and adds explicit testing of CRS result codes on config space accesses. This should make it more reliable. Also, bridges with no link are now still created, though config space accesses beyond the root complex are filtered. This is one step toward eventually supporting hotplug. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/ppc4xx_pci.c | 220 +++++++++++++++++++++++---------------- arch/powerpc/sysdev/ppc4xx_pci.h | 2 + 2 files changed, 133 insertions(+), 89 deletions(-) (limited to 'arch/powerpc/sysdev') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index b986eff09f6b..0538980ef89c 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -16,6 +16,8 @@ * */ +#undef DEBUG + #include #include #include @@ -531,10 +533,13 @@ struct ppc4xx_pciex_port struct device_node *node; unsigned int index; int endpoint; + int link; + int has_ibpre; unsigned int sdr_base; dcr_host_t dcrs; struct resource cfg_space; struct resource utl_regs; + void __iomem *utl_base; }; static struct ppc4xx_pciex_port *ppc4xx_pciex_ports; @@ -706,29 +711,44 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) return 0; } -static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) +static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + return ppc440spe_pciex_init_port_hw(port); +} + +static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port) { - void __iomem *utl_base; + int rc = ppc440spe_pciex_init_port_hw(port); + + port->has_ibpre = 1; + + return rc; +} +static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ /* XXX Check what that value means... I hate magic */ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800); - utl_base = ioremap(port->utl_regs.start, 0x100); - BUG_ON(utl_base == NULL); - /* * Set buffer allocations and then assert VRB and TXE. */ - out_be32(utl_base + PEUTL_OUTTR, 0x08000000); - out_be32(utl_base + PEUTL_INTR, 0x02000000); - out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000); - out_be32(utl_base + PEUTL_PBBSZ, 0x53000000); - out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000); - out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000); - out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(utl_base + PEUTL_PCTL, 0x80800066); + out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - iounmap(utl_base); + return 0; +} + +static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* Report CRS to the operating system */ + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); return 0; } @@ -736,14 +756,15 @@ static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = { .core_init = ppc440spe_pciex_core_init, - .port_init_hw = ppc440spe_pciex_init_port_hw, + .port_init_hw = ppc440speA_pciex_init_port_hw, .setup_utl = ppc440speA_pciex_init_utl, }; static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = { .core_init = ppc440spe_pciex_core_init, - .port_init_hw = ppc440spe_pciex_init_port_hw, + .port_init_hw = ppc440speB_pciex_init_port_hw, + .setup_utl = ppc440speB_pciex_init_utl, }; @@ -821,30 +842,21 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) { - void __iomem *utl_base; - dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); - utl_base = ioremap(port->utl_regs.start, 0x100); - BUG_ON(utl_base == NULL); - /* * Set buffer allocations and then assert VRB and TXE. */ - out_be32(utl_base + PEUTL_OUTTR, 0x02000000); - out_be32(utl_base + PEUTL_INTR, 0x02000000); - out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); - out_be32(utl_base + PEUTL_PBBSZ, 0x21000000); - out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000); - out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); - out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000); - out_be32(utl_base + PEUTL_PCTL, 0x80800066); + out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); - out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); - out_be32(utl_base + PEUTL_RCSTA, - in_be32(utl_base + PEUTL_RCSTA) | 0x000040000); - - iounmap(utl_base); + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); return 0; } @@ -926,17 +938,29 @@ static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0); } -static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) +static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, + unsigned int sdr_offset, + unsigned int mask, + unsigned int value, + int timeout_ms) { - int attempts, rc = 0; u32 val; - /* Check if it's endpoint or root complex - * - * XXX Do we want to use the device-tree instead ? --BenH. - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_DLPSET); - port->endpoint = (((val >> 20) & 0xf) != PTYPE_ROOT_PORT); + while(timeout_ms--) { + val = mfdcri(SDR0, port->sdr_base + sdr_offset); + if ((val & mask) == value) { + pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n", + port->index, sdr_offset, timeout_ms, val); + return 0; + } + msleep(1); + } + return -1; +} + +static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) +{ + int rc = 0; /* Init HW */ if (ppc4xx_pciex_hwops->port_init_hw) @@ -944,44 +968,40 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) if (rc != 0) return rc; - /* - * Notice: the following delay has critical impact on device - * initialization - if too short (<50ms) the link doesn't get up. - * - * XXX FIXME: There are various issues with that link up thingy, - * we could just wait for the link with a timeout but Stefan says - * some cards need more time even after the link is up. I'll - * investigate. For now, we keep a fixed 1s delay. - * - * Ultimately, it should be made asynchronous so all ports are - * brought up simultaneously though. - */ - printk(KERN_INFO "PCIE%d: Waiting for link to go up...\n", + printk(KERN_INFO "PCIE%d: Checking link...\n", port->index); - msleep(1000); - /* - * Check that we exited the reset state properly - */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS); - if (val & (1 << 20)) { - printk(KERN_WARNING "PCIE%d: PGRST failed %08x\n", - port->index, val); + /* Wait for reset to complete */ + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { + printk(KERN_WARNING "PCIE%d: PGRST failed\n", + port->index); return -1; } - /* - * Verify link is up + /* Check for card presence detect if supported, if not, just wait for + * link unconditionally. + * + * note that we don't fail if there is no link, we just filter out + * config space accesses. That way, it will be easier to implement + * hotplug later on. */ - val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); - if (!(val & 0x00001000)) { - printk(KERN_INFO "PCIE%d: link is not up !\n", + if (!port->has_ibpre || + !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 1 << 28, 1 << 28, 100)) { + printk(KERN_INFO + "PCIE%d: Device detected, waiting for link...\n", port->index); - return -1; - } - - printk(KERN_INFO "PCIE%d: link is up !\n", - port->index); + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 0x1000, 0x1000, 2000)) + printk(KERN_WARNING + "PCIE%d: Link up failed\n", port->index); + else { + printk(KERN_INFO + "PCIE%d: link is up !\n", port->index); + port->link = 1; + } + } else + printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); /* * Initialize mapping: disable all regions and configure @@ -990,12 +1010,13 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) ppc4xx_pciex_port_init_mapping(port); /* - * Setup UTL registers - but only on revA! - * We use default settings for revB chip. - * - * To be reworked. We may also be able to move that to - * before the link wait - * --BenH. + * Map UTL + */ + port->utl_base = ioremap(port->utl_regs.start, 0x100); + BUG_ON(port->utl_base == NULL); + + /* + * Setup UTL registers --BenH. */ if (ppc4xx_pciex_hwops->setup_utl) ppc4xx_pciex_hwops->setup_utl(port); @@ -1003,15 +1024,13 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) /* * Check for VC0 active and assert RDY. */ - attempts = 10; - while (!(mfdcri(SDR0, port->sdr_base + PESDRn_RCSSTS) & (1 << 16))) { - if (!(attempts--)) { - printk(KERN_INFO "PCIE%d: VC0 not active\n", - port->index); - return -1; - } - msleep(1000); + if (port->link && + ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, + 1 << 16, 1 << 16, 5000)) { + printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); + port->link = 0; } + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20); msleep(100); @@ -1048,6 +1067,10 @@ static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port, PCI_SLOT(devfn) != 0) return PCIBIOS_DEVICE_NOT_FOUND; + /* Check if we have a link */ + if ((bus->number != port->hose->first_busno) && !port->link) + return PCIBIOS_DEVICE_NOT_FOUND; + return 0; } @@ -1092,6 +1115,9 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn, gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG); dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA); + /* Make sure no CRS is recorded */ + out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000); + switch (len) { case 1: *val = in_8((u8 *)(addr + offset)); @@ -1109,6 +1135,14 @@ static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn, bus->number, hose->first_busno, hose->last_busno, devfn, offset, len, addr + offset, *val); + /* Check for CRS (440SPe rev B does that for us but heh ..) */ + if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) { + pr_debug("Got CRS !\n"); + if (len != 4 || offset != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + *val = 0xffff0001; + } + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg); return PCIBIOS_SUCCESSFUL; @@ -1278,8 +1312,11 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port) void __iomem *mbase = NULL, *cfg_data = NULL; /* XXX FIXME: Handle endpoint mode properly */ - if (port->endpoint) + if (port->endpoint) { + printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n", + port->index); return; + } /* Check if primary bridge */ if (of_get_property(port->node, "primary", NULL)) @@ -1424,6 +1461,9 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) } port->sdr_base = *pval; + /* XXX Currently, we only support root complex mode */ + port->endpoint = 0; + /* Fetch config space registers address */ if (of_address_to_resource(np, 0, &port->cfg_space)) { printk(KERN_ERR "%s: Can't get PCI-E config space !", @@ -1447,8 +1487,10 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0)); /* Initialize the port specific registers */ - if (ppc4xx_pciex_port_init(port)) + if (ppc4xx_pciex_port_init(port)) { + printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index); return; + } /* Setup the linux hose data structure */ ppc4xx_pciex_port_setup_hose(port); diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index 43e51ce5c477..1c07908dc6ef 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -330,6 +330,8 @@ /* * Config space register offsets */ +#define PECFG_ECRTCTL 0x074 + #define PECFG_BAR0LMPA 0x210 #define PECFG_BAR0HMPA 0x214 #define PECFG_BAR1MPA 0x218 -- cgit v1.2.3-58-ga151