From c5af5451fcf97f38f0c79cbb9f929af2779f234d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 16 Jun 2010 19:29:51 +0000 Subject: Blackfin: boards: fix num_chipselect values for on-chip SPI buses The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 4 ++-- arch/blackfin/mach-bf518/boards/tcm-bf518.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/blackfin/mach-bf518') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 44d6d5299022..46cb5d410b62 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -312,7 +312,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 5, + .num_chipselect = 6, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; @@ -347,7 +347,7 @@ static struct platform_device bfin_spi0_device = { /* SPI (1) */ static struct bfin5xx_spi_master bfin_spi1_info = { - .num_chipselect = 5, + .num_chipselect = 6, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; diff --git a/arch/blackfin/mach-bf518/boards/tcm-bf518.c b/arch/blackfin/mach-bf518/boards/tcm-bf518.c index 9b72e5cb21fe..bead810a6546 100644 --- a/arch/blackfin/mach-bf518/boards/tcm-bf518.c +++ b/arch/blackfin/mach-bf518/boards/tcm-bf518.c @@ -291,7 +291,7 @@ static struct platform_device bfin_spi0_device = { /* SPI (1) */ static struct bfin5xx_spi_master bfin_spi1_info = { - .num_chipselect = 5, + .num_chipselect = 6, .enable_dma = 1, /* master has the ability to do dma transfer */ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; -- cgit v1.2.3-58-ga151