From 2a8ac187e03027a958b289dd8701ca9c013ab096 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 8 Mar 2010 17:44:19 +0000 Subject: [ARM] pxa: fix for variables in uncompress.h being discarded Due to commit: 5de813b ARM: Eliminate decompressor -Dstatic= PIC hack The data section will be discarded for the decompressor, thus move the static variables into BSS section by initializing them at run time. Signed-off-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/uncompress.h | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5ef91d9d17e4..759b851ec985 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -16,9 +16,9 @@ #define BTUART_BASE (0x40200000) #define STUART_BASE (0x40700000) -static unsigned long uart_base = FFUART_BASE; -static unsigned int uart_shift = 2; -static unsigned int uart_is_pxa = 1; +static unsigned long uart_base; +static unsigned int uart_shift; +static unsigned int uart_is_pxa; static inline unsigned char uart_read(int offset) { @@ -56,6 +56,11 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* initialize to default */ + uart_base = FFUART_BASE; + uart_shift = 2; + uart_is_pxa = 1; + if (machine_is_littleton() || machine_is_intelmote2() || machine_is_csb726() || machine_is_stargate2() || machine_is_cm_x300() || machine_is_balloon3()) -- cgit v1.2.3-58-ga151 From 7471f46d74e0e2a668f4bc085ef486b1079b3466 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 22 Mar 2010 09:39:58 +0800 Subject: [ARM] mmp: fix for variables in uncompress.h being discarded Due to commit: 5de813b ARM: Eliminate decompressor -Dstatic= PIC hack The data section will be discarded for the decompressor, thus move the static variables into BSS section by initializing them at run time. Reported-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/uncompress.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index a7dcc5307216..85bd8a2d84b5 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -14,7 +14,7 @@ #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) -static volatile unsigned long *UART = (unsigned long *)UART2_BASE; +static volatile unsigned long *UART; static inline void putc(char c) { @@ -37,6 +37,9 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* default to UART2 */ + UART = (unsigned long *)UART2_BASE; + if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } -- cgit v1.2.3-58-ga151 From ef80936f99ce558a470c5379040abd0ece52c2ff Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Sun, 7 Mar 2010 21:59:16 +0000 Subject: [ARM] pxa: remove spi cs gpio direction to avoid clash with driver Signed-off-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/imote2.c | 4 ---- arch/arm/mach-pxa/stargate2.c | 5 ----- 2 files changed, 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index b2f878bd460b..5161dca8ccc0 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -559,10 +559,6 @@ static void __init imote2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* SPI chip select directions - all other directions should - * be handled by drivers.*/ - gpio_direction_output(37, 0); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a98a434f0111..2041eb1d90ba 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -764,11 +764,6 @@ static void __init stargate2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* spi chip selects */ - gpio_direction_output(37, 0); - gpio_direction_output(24, 0); - gpio_direction_output(39, 0); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); -- cgit v1.2.3-58-ga151 From 1fe2b6b527779ca966bc285dc27f84835bc1591a Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 9 Mar 2010 11:04:44 +0800 Subject: [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms Reported-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 38fbd0a0e402..c5b2f0abf456 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -272,7 +272,6 @@ config MACH_H5000 config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x - select FB_W100 config MACH_MAGICIAN bool "Enable HTC Magician Support" @@ -547,7 +546,6 @@ config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. @@ -556,7 +554,6 @@ config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. @@ -573,7 +570,6 @@ config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. -- cgit v1.2.3-58-ga151 From 6533be390b1210285854fb2fc7ea80c0ada60b13 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 9 Mar 2010 10:34:27 +0800 Subject: [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm sharpsl_pm.c actually depends on max1111 driver being built-in when not using legacy ssp code. Reported-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index c5b2f0abf456..5b6ee46fa7f6 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -453,6 +453,13 @@ config PXA_SHARPSL config SHARPSL_PM bool select APM_EMULATION + select SHARPSL_PM_MAX1111 + +config SHARPSL_PM_MAX1111 + bool + depends on !CORGI_SSP_DEPRECATED + select HWMON + select SENSORS_MAX1111 config CORGI_SSP_DEPRECATED bool -- cgit v1.2.3-58-ga151 From 1b0d76cb9d5a65567230097a2512046f09f30523 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 22 Mar 2010 10:33:58 +0800 Subject: [ARM] locomo: fix SPI register offset The locomo spi registers are all defined in locomo.h as offsets from the first spi register LOCOMO_SPI (0x60), which is itself an offset from the locomo base address. To correctly access these registers LOCOMO_SPI must always be included in the address calculation. There are two places in locomo.c where this is not done. The first one, in locomo_suspend, actually results in a write to LOCOMO_ST instead of LOCOMO_SPICT. The second is in __locomo_probe and results in a write to LOCOMO_MCSX2 instead of LOCOMO_SPIIE. Fix these by including LOCOMO_SPI in the calculation. Signed-off-by: H Hartley Sweeten Signed-off-by: Eric Miao --- arch/arm/common/locomo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 90ae00b631c2..4f9ccf60aac2 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ - locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ @@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ - locomo_writel(0, lchip->base + LOCOMO_SPIIE); + locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); -- cgit v1.2.3-58-ga151 From c8c3dcb9df8025ed48f8b14bf4b8a77801d88758 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Mon, 22 Mar 2010 11:09:20 +0800 Subject: [ARM] locomo: fix unpaired spin_lock_irqsave The function locomo_m62332_senddata sends a three byte i2c message to a M62332 DAC. This entire function is guarded with a spin_lock_irqsave at the start of the function and a spin_unlock_irqrestore at the end. As each byte is transferred, the i2c ACK from the DAC is checked. Currently, if the ACK is missing the function simply returns without the unlock. It also leaves the i2c bus in an invalid state since the last byte transferred did not have a "stop" condition and leave the bus idle. Fix this by adding an exit path using goto. Signed-off-by: H Hartley Sweeten Signed-off-by: Eric Miao --- arch/arm/common/locomo.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 4f9ccf60aac2..9dff07c80ddb 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); - return; + goto out; } /* Send Sub address (LSB is channel select) */ @@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); - return; + goto out; } /* Send DAC data */ @@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); - return; } +out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); -- cgit v1.2.3-58-ga151 From af089f517a1fea0af2053f105c9360df614be07c Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 22 Mar 2010 11:51:05 +0800 Subject: [ARM] pxa/raumfeld: remove duplicated #include Remove duplicated #include('s) in arch/arm/mach-pxa/raumfeld.c Signed-off-by: Huang Weiyi Signed-off-by: Eric Miao --- arch/arm/mach-pxa/raumfeld.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 3184bdc14526..9d23f6904441 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -37,8 +37,6 @@ #include #include #include -#include -#include #include #include #include -- cgit v1.2.3-58-ga151 From fe3ebaad3229c5e842e8b24cf2a24d7049a6481c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 18 Mar 2010 19:37:29 +0100 Subject: [ARM] pxa/raumfeld: fix button name This fixes a warning when booting 2.6.34-rc2: [ 26.619814] ------------[ cut here ]------------ [ 26.624604] WARNING: at fs/proc/generic.c:316 __xlate_proc_name+0xac/0xc0() [ 26.631555] name 'on/off button' [ 26.634753] Modules linked in: Signed-off-by: Daniel Mack Cc: Sven Neumann Signed-off-by: Eric Miao --- arch/arm/mach-pxa/raumfeld.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 9d23f6904441..44bb675e47f1 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -442,7 +442,7 @@ static struct gpio_keys_button gpio_keys_button[] = { .active_low = 0, .wakeup = 0, .debounce_interval = 5, /* ms */ - .desc = "on/off button", + .desc = "on_off button", }, }; -- cgit v1.2.3-58-ga151