From 8e140c8e64d20ac17b003c0f5607d782f5c1f5b0 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 5 Jun 2015 15:52:25 -0700 Subject: ARM: dts: qcom: Replace gpio node with pinctrl node Replace the standalone gpio driver with pinctrl-msm as we now have msm8660 support there. Signed-off-by: Bjorn Andersson Acked-by: Linus Walleij Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8660.dtsi | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e0b2ce2910e0..ef2fe72b54c9 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -67,15 +67,16 @@ cpu-offset = <0x40000>; }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + gpio-controller; #gpio-cells = <2>; - ngpio = <173>; interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; + }; gcc: clock-controller@900000 { @@ -115,7 +116,7 @@ pmicintc: pmic@0 { compatible = "qcom,pm8058"; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <88 8>; #interrupt-cells = <2>; interrupt-controller; -- cgit v1.2.3-58-ga151 From 2a39c9b3962402b2bbe530686858b906a6bddd0e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 13:31:12 -0700 Subject: ARM: dts: qcom: Replace gpio node with pinctrl node Now that we have a proper pinctrl driver for the gpio block we can change the compatible field here and configure the pinmux on msm8960 devices. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8960.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a02b984cc68d..1ae3fe828e59 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -73,11 +73,10 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; gpio-controller; #gpio-cells = <2>; - ngpio = <150>; interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3-58-ga151 From 9de4bc97b33822df28886668d27d6ddc0fd241c7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 13:31:13 -0700 Subject: ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes Add the basic RPM and RPM regulator nodes that boards can fill in with their board specific details. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8960.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 1ae3fe828e59..fcf4bb5f9c3f 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -4,6 +4,7 @@ #include #include +#include #include / { @@ -104,6 +105,24 @@ #reset-cells = <1>; }; + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + }; + }; + acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; -- cgit v1.2.3-58-ga151 From fe9ad1679c313f76fdf94a712b0dd91275e839d3 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 13:31:14 -0700 Subject: ARM: dts: qcom: Add MSM8960 CDP RPM regulators Add RPM regulators and configure their constraints on the MSM8960 CDP so that we can control these supplies. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 236 +++++++++++++++++++++++++++++++++ 1 file changed, 236 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7f70fae90959..be241f14246d 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -26,6 +26,242 @@ status = "okay"; }; }; + + rpm@108000 { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = ; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; }; }; -- cgit v1.2.3-58-ga151 From 724cde479dafcd4a6ee1e39e820ac94c0c7c04c5 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 13:31:15 -0700 Subject: ARM: dts: qcom: Add ks8851 node for wired ethernet The micrel ks8851 device is present on MSM8960 CDP boards. It is connected to two regulators, one controlled via a gpio and another controlled via the RPM. Add the gsbi, spi, gpio regulator, and micrel ks8851 nodes so that ethernet works properly. Signed-off-by: Stephen Boyd Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 66 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/qcom-msm8960.dtsi | 25 +++++++++++++ 2 files changed, 91 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index be241f14246d..fad71d5527b0 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -262,6 +262,72 @@ }; }; }; + + gsbi@16000000 { + status = "ok"; + qcom,mode = ; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_default>; + spi@16080000 { + status = "ok"; + eth@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 8>; + spi-max-frequency = <5400000>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; + }; + }; + + pinctrl@800000 { + spi1_default: spi1_default { + mux { + pins = "gpio6", "gpio7", "gpio9"; + function = "gsbi1"; + }; + + mosi { + pins = "gpio6"; + drive-strength = <12>; + bias-disable; + }; + + miso { + pins = "gpio7"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio8"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk { + pins = "gpio9"; + drive-strength = <12>; + bias-disable; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + ext_l2: gpio-regulator@91 { + compatible = "regulator-fixed"; + regulator-name = "ext_l2"; + gpio = <&msmgpio 91 0>; + startup-delay-us = <10000>; + enable-active-high; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index fcf4bb5f9c3f..2096a94c9b52 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -271,5 +271,30 @@ compatible = "qcom,tcsr-msm8960", "syscon"; reg = <0x1a400000 0x100>; }; + + gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16080000 0x1000>; + interrupts = <0 147 0>; + spi-max-frequency = <24000000>; + cs-gpios = <&msmgpio 8 0>; + + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; }; }; -- cgit v1.2.3-58-ga151 From b4e745e135e3b036cbf3399a0477abac280f4d35 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 26 Jun 2015 14:50:16 -0700 Subject: ARM: dts: msm8974: Add tcsr mutex node Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 37b47b5538b8..7c7b7dc91e32 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -220,6 +220,11 @@ reg = <0xfc400000 0x4000>; }; + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + mmcc: clock-controller@fd8c0000 { compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; @@ -227,6 +232,13 @@ reg = <0xfd8c0000 0x6000>; }; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; + serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; -- cgit v1.2.3-58-ga151 From 6297c4b242f5b1e3d2089291b8788d900aecbce1 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 26 Jun 2015 14:50:17 -0700 Subject: ARM: dts: msm8974: Add smem reservation and node Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 7c7b7dc91e32..d7c99b894a49 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -9,6 +9,17 @@ compatible = "qcom,msm8974"; interrupt-parent = <&intc>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -239,6 +250,15 @@ #hwlock-cells = <1>; }; + smem@fa00000 { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + reg = <0xfc428000 0x4000>; + + hwlocks = <&tcsr_mutex 3>; + }; + serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; -- cgit v1.2.3-58-ga151 From 874443fe9e339378d973f8752d6b4ad2ab9fe364 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 14:51:52 +0100 Subject: ARM: dts: apq8064: Add pm8921 mfd and its gpio node This patch adds pmic gpio node to the device tree, this node is necessary for devices like wlan to control reset gpio. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index df2061ec630d..a55974fbe1ec 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -6,7 +6,6 @@ #include #include #include - / { model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; @@ -287,6 +286,41 @@ compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <74 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio"; + reg = <0x150>; + interrupts = <192 1>, <193 1>, <194 1>, + <195 1>, <196 1>, <197 1>, + <198 1>, <199 1>, <200 1>, + <201 1>, <202 1>, <203 1>, + <204 1>, <205 1>, <206 1>, + <207 1>, <208 1>, <209 1>, + <210 1>, <211 1>, <212 1>, + <213 1>, <214 1>, <215 1>, + <216 1>, <217 1>, <218 1>, + <219 1>, <220 1>, <221 1>, + <222 1>, <223 1>, <224 1>, + <225 1>, <226 1>, <227 1>, + <228 1>, <229 1>, <230 1>, + <231 1>, <232 1>, <233 1>, + <234 1>, <235 1>; + + gpio-controller; + #gpio-cells = <2>; + + }; + }; }; gcc: clock-controller@900000 { -- cgit v1.2.3-58-ga151 From bce3604696769afd4ec575f15499aad174e14a74 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 14:52:02 +0100 Subject: ARM: dts: apq8064: add pm8921 mpp support This patch adds pmic pm8921 mpp gpio controller node. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index a55974fbe1ec..d17c399a1060 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -320,6 +320,18 @@ #gpio-cells = <2>; }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + interrupts = + <128 1>, <129 1>, <130 1>, <131 1>, + <132 1>, <133 1>, <134 1>, <135 1>, + <136 1>, <137 1>, <138 1>, <139 1>; + }; + }; }; -- cgit v1.2.3-58-ga151 From 86e252a4f850a525ad5514163e14a36f1f1d19a4 Mon Sep 17 00:00:00 2001 From: Pramod Gurav Date: Mon, 27 Jul 2015 14:52:10 +0100 Subject: ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux This change adds DT support for GSBI6 and muxes the gpio pins as UART lines. Also defines a alias for serial port on these lines. Signed-off-by: Pramod Gurav [Srinivas Kandagatla]: fix pinctrl location and rename alias correctly Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 13 +++++++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 30 +++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index a7c939ba8873..4cf967f5fb3d 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -7,6 +7,7 @@ aliases { serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; }; soc { @@ -115,6 +116,18 @@ }; }; + gsbi@16500000 { + status = "ok"; + qcom,mode = ; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart_pins>; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = ; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d17c399a1060..e631b5822660 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -126,6 +126,13 @@ function = "gsbi3"; }; }; + + uart_pins: uart_pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -248,7 +255,6 @@ #address-cells = <1>; #size-cells = <1>; ranges; - i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16280000 0x1000>; @@ -259,6 +265,28 @@ }; }; + gsbi6: gsbi@16500000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <6>; + reg = <0x16500000 0x03>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x100>, + <0x16500000 0x03>; + interrupts = <0 156 0x0>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; -- cgit v1.2.3-58-ga151 From 504155cafffbe35d5678c10af7777303ead01928 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 27 Jul 2015 14:52:19 +0100 Subject: ARM: dts: apq8064: fix missing gsbi cell-index Without this i2c instance for missing cell-index nodes would fail, fix it by adding correct cell-index. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index e631b5822660..b9edc4e0de0b 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -249,6 +249,7 @@ gsbi3: gsbi@16200000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; reg = <0x16200000 0x100>; clocks = <&gcc GSBI3_H_CLK>; clock-names = "iface"; -- cgit v1.2.3-58-ga151 From c37e995807bde0fa20ec8f9a29c01dd29e2eaa74 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 28 Jul 2015 09:12:51 +0100 Subject: ARM: dts: apq8064: remove temporary fixed regulator for mmc This patch removes temporary fixed regluator use for mmc. Board files should use the regulators which are wiredup appropriately. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index b9edc4e0de0b..d2e94d647c27 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -523,14 +523,6 @@ }; /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; - sdcc1bam:dma@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; @@ -580,7 +572,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; }; @@ -599,7 +590,6 @@ cap-mmc-highspeed; max-frequency = <192000000>; no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; }; @@ -617,8 +607,6 @@ cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <48000000>; - vmmc-supply = <&vsdcc_fixed>; - vqmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; -- cgit v1.2.3-58-ga151 From 2736bbaccbbb4e4e96f2560d0990f25ed531cfe7 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 28 Jul 2015 09:12:58 +0100 Subject: ARM: dts: ifc6410: add real regulators for sdcc nodes. This patch adds real regulators for all the three sdcc nodes. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 4cf967f5fb3d..88d6655ddaf6 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -74,6 +74,12 @@ bias-pull-down; }; + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; @@ -85,9 +91,25 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; }; }; + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = ; @@ -188,11 +210,14 @@ /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; pinctrl-0 = <&card_detect>; cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; @@ -200,6 +225,8 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; }; }; }; -- cgit v1.2.3-58-ga151 From baff39e6708e099261bac73a46377cffc9257388 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 28 Jul 2015 09:13:05 +0100 Subject: ARM: dts: qs600: Add real regulators to sdcc This patch adds real regulators to sdcc nodes. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 71512b3ca444..34ccb260f12a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -67,6 +67,12 @@ bias-pull-down; }; + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -140,19 +146,33 @@ status = "okay"; }; + /* on board fixed 3.3v supply */ + v3p3_fixed: v3p3 { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&v3p3_fixed>; }; /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&v3p3_fixed>; + vqmmc-supply = <&v3p3_fixed>; }; }; }; -- cgit v1.2.3-58-ga151 From 10bfcfea9bbe91adf79cc4efc9c764edd0cbadda Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:44 -0700 Subject: ARM: dts: qcom: Label serial nodes for aliasing and stdout-path Add a label to the serial nodes that are being used for the console. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084.dtsi | 2 +- arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8660.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8960.dtsi | 2 +- arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 7084010ee61b..0554fbd72c40 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -234,7 +234,7 @@ interrupts = <0 208 0>; }; - serial@f995e000 { + blsp2_uart2: serial@f995e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf995e000 0x1000>; interrupts = <0 114 0x0>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 9f727d8eadf6..fa698635eea0 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -197,7 +197,7 @@ syscon-tcsr = <&tcsr>; - serial@16340000 { + gsbi4_serial: serial@16340000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16340000 0x1000>, <0x16300000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ef2fe72b54c9..e5f7f33aa467 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -98,7 +98,7 @@ syscon-tcsr = <&tcsr>; - serial@19c40000 { + gsbi12_serial: serial@19c40000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 2096a94c9b52..134cd91d68ec 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -157,7 +157,7 @@ syscon-tcsr = <&tcsr>; - serial@16440000 { + gsbi5_serial: serial@16440000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index d7c99b894a49..ab8e57250468 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -259,7 +259,7 @@ hwlocks = <&tcsr_mutex 3>; }; - serial@f991e000 { + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <0 108 0x0>; -- cgit v1.2.3-58-ga151 From 4e19db11e99b27bdd4817c3d58a7ead7af8d7d7c Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:45 -0700 Subject: ARM: dts: qcom: apq8064-cm-qs600: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Mike Rapoport Cc: Igor Grinberg Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 34ccb260f12a..47c0282bdfca 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -4,6 +4,14 @@ model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { i2c1_pins: i2c1 { -- cgit v1.2.3-58-ga151 From 7f9e28b61057da3a4aa56a79436916a821e63a35 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:46 -0700 Subject: ARM: dts: qcom: apq8064-ifc6410: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 88d6655ddaf6..f3100da082b2 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -10,6 +10,10 @@ serial1 = &gsbi6_serial; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinctrl@800000 { card_detect: card_detect { -- cgit v1.2.3-58-ga151 From 5f769789bdec38c1d5b19a8743924daf87f5d023 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:47 -0700 Subject: ARM: dts: qcom: apq8074-dragonboard: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8074-dragonboard.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index d484d08163e9..835bdc71c5ba 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -6,6 +6,14 @@ model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f991e000 { status = "ok"; -- cgit v1.2.3-58-ga151 From d92c945d854f9d973d3a0836548c93ed249b8f3a Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:48 -0700 Subject: ARM: dts: qcom: apq8084-ifc6540: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index f7725b96612c..c9c2b769554f 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ8084/IFC6540"; compatible = "qcom,apq8084-ifc6540", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; -- cgit v1.2.3-58-ga151 From ccfdf7cd7dfaa4140702ff43d760d0eb1578d725 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:49 -0700 Subject: ARM: dts: qcom: apq8084-mtp: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-apq8084-mtp.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts index cb43acfc5d1d..3016c7048d44 100644 --- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -5,6 +5,14 @@ model = "Qualcomm APQ 8084-MTP"; compatible = "qcom,apq8084-mtp", "qcom,apq8084"; + aliases { + serial0 = &blsp2_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { serial@f995e000 { status = "okay"; -- cgit v1.2.3-58-ga151 From 9a61b3a39a88b955d89c5f19e01b0b19185ebce6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:50 -0700 Subject: ARM: dts: qcom: ipq8064-ap148: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Mathieu Olivari Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 55b2910efd87..d501382493e3 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -4,6 +4,14 @@ model = "Qualcomm IPQ8064/AP148"; compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3-58-ga151 From a96731089e8e0d550f017359dacaee19463517c7 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:51 -0700 Subject: ARM: dts: qcom: msm8660-surf: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8660-surf.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index e0883c376248..b17f379e8c2a 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@19c00000 { status = "ok"; -- cgit v1.2.3-58-ga151 From c0ed595961c44beea0d0dc3b0e2b1ef354931bdf Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:52 -0700 Subject: ARM: dts: qcom: msm8960-cdp: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8960-cdp.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index fad71d5527b0..b72a55462caf 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -6,6 +6,14 @@ model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + aliases { + serial0 = &gsbi5_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { gsbi@16400000 { status = "ok"; -- cgit v1.2.3-58-ga151 From 8f1dc3cf8f1e617ec888bcdb69111aae9bf4a9e0 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 16 Jun 2015 14:31:53 -0700 Subject: ARM: dts: qcom: msm8974-sony-xperia-honami: Use stdout-path Use stdout-path so that we don't have to put the console on the kernel command line. Cc: Tim Bird Cc: Bjorn Andersson Signed-off-by: Stephen Boyd --- arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index bd35b0674ff6..eb547f1f6a60 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -6,6 +6,14 @@ model = "Sony Xperia Z1"; compatible = "sony,xperia-honami", "qcom,msm8974"; + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { reg = <0 0x40000000>, <0x40000000 0x40000000>; device_type = "memory"; -- cgit v1.2.3-58-ga151