From 08072dde333c2f09114a01b0bd32be52ecce195b Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 28 Oct 2013 17:49:20 +0100 Subject: HID: wiimote: add pro-controller analog stick calibration The analog sticks of the pro-controller might report slightly off values. To guarantee a uniform setup, we now calibrate analog-stick values during pro-controller setup. Unfortunately, the pro-controller fails during normal EEPROM reads and I couldn't figure out whether there are any calibration values stored on the device. Therefore, we now use the first values reported by the device (iff they are not _way_ off, which would indicate movement) to initialize the calibration values. To allow users to change this calibration data, we provide a pro_calib sysfs attribute. We also change the "flat" values so user-space correctly smoothes our data. It makes slightly off zero-positions less visible while still guaranteeing highly precise movement reports. Note that the pro controller reports zero-positions in a quite huge range (at least: -100 to +100). Reported-by: Rafael Brune Tested-by: Rafael Brune Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-driver-hid-wiimote | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote index ed5dd567d397..39dfa5cb1cc5 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote +++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote @@ -57,3 +57,21 @@ Description: This attribute is only provided if the device was detected as a Calibration data is already applied by the kernel to all input values but may be used by user-space to perform other transformations. + +What: /sys/bus/hid/drivers/wiimote//pro_calib +Date: October 2013 +KernelVersion: 3.13 +Contact: David Herrmann +Description: This attribute is only provided if the device was detected as a + pro-controller. It provides a single line with 4 calibration + values for all 4 analog sticks. Format is: "x1:y1 x2:y2". Data + is prefixed with a +/-. Each value is a signed 16bit number. + Data is encoded as decimal numbers and specifies the offsets of + the analog sticks of the pro-controller. + Calibration data is already applied by the kernel to all input + values but may be used by user-space to perform other + transformations. + Calibration data is detected by the kernel during device setup. + You can write "scan\n" into this file to re-trigger calibration. + You can also write data directly in the form "x1:y1 x2:y2" to + set the calibration values manually. -- cgit v1.2.3-58-ga151 From 6f3a19360545bf8c646a4d079a8c023ae06838de Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Mon, 28 Oct 2013 18:52:07 +0100 Subject: HID: roccat: add support for Ryos MK keyboards Added support for 3 keyboards with increasing illumination capabilities Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- .../ABI/testing/sysfs-driver-hid-roccat-ryos | 178 +++++++++++++++ drivers/hid/Makefile | 2 +- drivers/hid/hid-core.c | 3 + drivers/hid/hid-ids.h | 3 + drivers/hid/hid-roccat-ryos.c | 241 +++++++++++++++++++++ 5 files changed, 426 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos create mode 100644 drivers/hid/hid-roccat-ryos.c (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos b/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos new file mode 100644 index 000000000000..1d6a8cf9dc0a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-ryos @@ -0,0 +1,178 @@ +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/control +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/profile +Date: October 2013 +Contact: Stefan Achatz +Description: The mouse can store 5 profiles which can be switched by the + press of a button. profile holds index of actual profile. + This value is persistent, so its value determines the profile + that's active when the device is powered on next time. + When written, the device activates the set profile immediately. + The data has to be 3 bytes long. + The device will reject invalid data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_primary +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the default of all keys for + a specific profile. Profile index is included in written data. + The data has to be 125 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_function +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the function of the + function keys for a specific profile. Profile index is included + in written data. The data has to be 95 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_macro +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the function of the macro + keys for a specific profile. Profile index is included in + written data. The data has to be 35 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_thumbster +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the function of the + thumbster keys for a specific profile. Profile index is included + in written data. The data has to be 23 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_extra +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the function of the + capslock and function keys for a specific profile. Profile index + is included in written data. The data has to be 8 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/keys_easyzone +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the function of the + easyzone keys for a specific profile. Profile index is included + in written data. The data has to be 294 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/key_mask +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one deactivate certain keys like + windows and application keys, to prevent accidental presses. + Profile index for which this settings occur is included in + written data. The data has to be 6 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/light +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the backlight intensity for + a specific profile. Profile index is included in written data. + This attribute is only valid for the glow and pro variant. + The data has to be 16 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/macro +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one store macros with max 480 + keystrokes for a specific button for a specific profile. + Button and profile indexes are included in written data. + The data has to be 2002 bytes long. + Before reading this file, control has to be written to select + which profile and key to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/info +Date: October 2013 +Contact: Stefan Achatz +Description: When read, this file returns general data like firmware version. + The data is 8 bytes long. + This file is readonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/reset +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one reset the device. + The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/talk +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one trigger easyshift functionality + from the host. + The data has to be 16 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/light_control +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one switch between stored and custom + light settings. + This attribute is only valid for the pro variant. + The data has to be 8 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/stored_lights +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set per-key lighting for different + layers. + This attribute is only valid for the pro variant. + The data has to be 1382 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/custom_lights +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set the actual per-key lighting. + This attribute is only valid for the pro variant. + The data has to be 20 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./ryos/roccatryos/light_macro +Date: October 2013 +Contact: Stefan Achatz +Description: When written, this file lets one set a light macro that is looped + whenever the device gets in dimness mode. + This attribute is only valid for the pro variant. + The data has to be 2002 bytes long. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index a959f4aecaf5..30e44318f87f 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -95,7 +95,7 @@ obj-$(CONFIG_HID_PRIMAX) += hid-primax.o obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \ - hid-roccat-lua.o hid-roccat-pyra.o hid-roccat-savu.o + hid-roccat-lua.o hid-roccat-pyra.o hid-roccat-ryos.o hid-roccat-savu.o obj-$(CONFIG_HID_SAITEK) += hid-saitek.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e80da62363bc..00794229a2cf 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1811,6 +1811,9 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK_GLOW) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_SAVU) }, #endif { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f0296a50be5f..768fafc42c87 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -726,6 +726,9 @@ #define USB_DEVICE_ID_ROCCAT_LUA 0x2c2e #define USB_DEVICE_ID_ROCCAT_PYRA_WIRED 0x2c24 #define USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS 0x2cf6 +#define USB_DEVICE_ID_ROCCAT_RYOS_MK 0x3138 +#define USB_DEVICE_ID_ROCCAT_RYOS_MK_GLOW 0x31ce +#define USB_DEVICE_ID_ROCCAT_RYOS_MK_PRO 0x3232 #define USB_DEVICE_ID_ROCCAT_SAVU 0x2d5a #define USB_VENDOR_ID_SAITEK 0x06a3 diff --git a/drivers/hid/hid-roccat-ryos.c b/drivers/hid/hid-roccat-ryos.c new file mode 100644 index 000000000000..47cc8f30ff6d --- /dev/null +++ b/drivers/hid/hid-roccat-ryos.c @@ -0,0 +1,241 @@ +/* + * Roccat Ryos driver for Linux + * + * Copyright (c) 2013 Stefan Achatz + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "hid-ids.h" +#include "hid-roccat-common.h" + +enum { + RYOS_REPORT_NUMBER_SPECIAL = 3, + RYOS_USB_INTERFACE_PROTOCOL = 0, +}; + +struct ryos_report_special { + uint8_t number; /* RYOS_REPORT_NUMBER_SPECIAL */ + uint8_t data[4]; +} __packed; + +static struct class *ryos_class; + +ROCCAT_COMMON2_BIN_ATTRIBUTE_W(control, 0x04, 0x03); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(profile, 0x05, 0x03); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_primary, 0x06, 0x7d); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_function, 0x07, 0x5f); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_macro, 0x08, 0x23); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_thumbster, 0x09, 0x17); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_extra, 0x0a, 0x08); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(keys_easyzone, 0x0b, 0x126); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(key_mask, 0x0c, 0x06); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(light, 0x0d, 0x10); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(macro, 0x0e, 0x7d2); +ROCCAT_COMMON2_BIN_ATTRIBUTE_R(info, 0x0f, 0x08); +ROCCAT_COMMON2_BIN_ATTRIBUTE_W(reset, 0x11, 0x03); +ROCCAT_COMMON2_BIN_ATTRIBUTE_W(light_control, 0x13, 0x08); +ROCCAT_COMMON2_BIN_ATTRIBUTE_W(talk, 0x16, 0x10); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(stored_lights, 0x17, 0x0566); +ROCCAT_COMMON2_BIN_ATTRIBUTE_W(custom_lights, 0x18, 0x14); +ROCCAT_COMMON2_BIN_ATTRIBUTE_RW(light_macro, 0x19, 0x07d2); + +static struct bin_attribute *ryos_bin_attrs[] = { + &bin_attr_control, + &bin_attr_profile, + &bin_attr_keys_primary, + &bin_attr_keys_function, + &bin_attr_keys_macro, + &bin_attr_keys_thumbster, + &bin_attr_keys_extra, + &bin_attr_keys_easyzone, + &bin_attr_key_mask, + &bin_attr_light, + &bin_attr_macro, + &bin_attr_info, + &bin_attr_reset, + &bin_attr_light_control, + &bin_attr_talk, + &bin_attr_stored_lights, + &bin_attr_custom_lights, + &bin_attr_light_macro, + NULL, +}; + +static const struct attribute_group ryos_group = { + .bin_attrs = ryos_bin_attrs, +}; + +static const struct attribute_group *ryos_groups[] = { + &ryos_group, + NULL, +}; + +static int ryos_init_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct usb_device *usb_dev = interface_to_usbdev(intf); + struct roccat_common2_device *ryos; + int retval; + + if (intf->cur_altsetting->desc.bInterfaceProtocol + != RYOS_USB_INTERFACE_PROTOCOL) { + hid_set_drvdata(hdev, NULL); + return 0; + } + + ryos = kzalloc(sizeof(*ryos), GFP_KERNEL); + if (!ryos) { + hid_err(hdev, "can't alloc device descriptor\n"); + return -ENOMEM; + } + hid_set_drvdata(hdev, ryos); + + retval = roccat_common2_device_init_struct(usb_dev, ryos); + if (retval) { + hid_err(hdev, "couldn't init Ryos device\n"); + goto exit_free; + } + + retval = roccat_connect(ryos_class, hdev, + sizeof(struct ryos_report_special)); + if (retval < 0) { + hid_err(hdev, "couldn't init char dev\n"); + } else { + ryos->chrdev_minor = retval; + ryos->roccat_claimed = 1; + } + + return 0; +exit_free: + kfree(ryos); + return retval; +} + +static void ryos_remove_specials(struct hid_device *hdev) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct roccat_common2_device *ryos; + + if (intf->cur_altsetting->desc.bInterfaceProtocol + != RYOS_USB_INTERFACE_PROTOCOL) + return; + + ryos = hid_get_drvdata(hdev); + if (ryos->roccat_claimed) + roccat_disconnect(ryos->chrdev_minor); + kfree(ryos); +} + +static int ryos_probe(struct hid_device *hdev, + const struct hid_device_id *id) +{ + int retval; + + retval = hid_parse(hdev); + if (retval) { + hid_err(hdev, "parse failed\n"); + goto exit; + } + + retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (retval) { + hid_err(hdev, "hw start failed\n"); + goto exit; + } + + retval = ryos_init_specials(hdev); + if (retval) { + hid_err(hdev, "couldn't install mouse\n"); + goto exit_stop; + } + + return 0; + +exit_stop: + hid_hw_stop(hdev); +exit: + return retval; +} + +static void ryos_remove(struct hid_device *hdev) +{ + ryos_remove_specials(hdev); + hid_hw_stop(hdev); +} + +static int ryos_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + struct usb_interface *intf = to_usb_interface(hdev->dev.parent); + struct roccat_common2_device *ryos = hid_get_drvdata(hdev); + + if (intf->cur_altsetting->desc.bInterfaceProtocol + != RYOS_USB_INTERFACE_PROTOCOL) + return 0; + + if (data[0] != RYOS_REPORT_NUMBER_SPECIAL) + return 0; + + if (ryos != NULL && ryos->roccat_claimed) + roccat_report_event(ryos->chrdev_minor, data); + + return 0; +} + +static const struct hid_device_id ryos_devices[] = { + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK_GLOW) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_RYOS_MK_PRO) }, + { } +}; + +MODULE_DEVICE_TABLE(hid, ryos_devices); + +static struct hid_driver ryos_driver = { + .name = "ryos", + .id_table = ryos_devices, + .probe = ryos_probe, + .remove = ryos_remove, + .raw_event = ryos_raw_event +}; + +static int __init ryos_init(void) +{ + int retval; + + ryos_class = class_create(THIS_MODULE, "ryos"); + if (IS_ERR(ryos_class)) + return PTR_ERR(ryos_class); + ryos_class->dev_groups = ryos_groups; + + retval = hid_register_driver(&ryos_driver); + if (retval) + class_destroy(ryos_class); + return retval; +} + +static void __exit ryos_exit(void) +{ + hid_unregister_driver(&ryos_driver); + class_destroy(ryos_class); +} + +module_init(ryos_init); +module_exit(ryos_exit); + +MODULE_AUTHOR("Stefan Achatz"); +MODULE_DESCRIPTION("USB Roccat Ryos MK/Glow/Pro driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-58-ga151