From c934b3612747bde6c81cf10c2bbde956c6690aec Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 17 Jul 2015 16:47:22 +0300 Subject: phy: ti-pipe3: i783 workaround for SATA lockup after dpll unlock/relock SATA_PLL_SOFT_RESET bit of CTRL_CORE_SMA_SW_0 must be toggled between a SATA DPLL unlock and re-lock to prevent SATA lockup. Introduce a new DT parameter 'syscon-pllreset' to provide the syscon regmap access to this register which sits in the control module. If the register is not provided we fallback to the old behaviour i.e. SATA DPLL refclk will not be disabled and we prevent SoC low power states. Signed-off-by: Roger Quadros Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/ti-phy.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 305e3df3d9b1..9cf9446eaf2e 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -82,6 +82,9 @@ Optional properties: - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. This is usually a subnode of ocp2scp to which it is connected. @@ -100,3 +103,16 @@ usb3phy@4a084400 { "sysclk", "refclk"; }; + +sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; -- cgit v1.2.3-58-ga151