From 0d9a693cc8619b28f0eeb689a554647d42848fde Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 29 Oct 2014 15:41:01 +0100 Subject: gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg Acked-by: Linus Walleij Acked-by: Grant Likely Signed-off-by: Rafael J. Wysocki --- Documentation/acpi/gpio-properties.txt | 52 ++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/acpi/gpio-properties.txt (limited to 'Documentation') diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt new file mode 100644 index 000000000000..3e45b8b7e4f2 --- /dev/null +++ b/Documentation/acpi/gpio-properties.txt @@ -0,0 +1,52 @@ +_DSD Device Properties Related to GPIO +-------------------------------------- + +With the release of ACPI 5.1 and the _DSD configuration objecte names +can finally be given to GPIOs (and other things as well) returned by +_CRS. Previously, we were only able to use an integer index to find +the corresponding GPIO, which is pretty error prone (it depends on +the _CRS output ordering, for example). + +With _DSD we can now query GPIOs using a name instead of an integer +index, like the ASL example below shows: + + // Bluetooth device with reset and shutdown GPIOs + Device (BTH) + { + Name (_HID, ...) + + Name (_CRS, ResourceTemplate () + { + GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, + "\\_SB.GPO0", 0, ResourceConsumer) {15} + GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, + "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} + }) + + Name (_DSD, Package () + { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, + Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, + } + }) + } + +The format of the supported GPIO property is: + + Package () { "name", Package () { ref, index, pin, active_low }} + + ref - The device that has _CRS containing GpioIo()/GpioInt() resources, + typically this is the device itself (BTH in our case). + index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. + pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. + active_low - If 1 the GPIO is marked as active_low. + +Since ACPI GpioIo() resource does not have a field saying whether it is +active low or high, the "active_low" argument can be used here. Setting +it to 1 marks the GPIO as active low. + +In our Bluetooth example the "reset-gpio" refers to the second GpioIo() +resource, second pin in that resource with the GPIO number of 31. -- cgit v1.2.3-58-ga151 From e36d453e98c57dda0f8ba68585676ac4ba36631e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 3 Nov 2014 23:39:57 +0100 Subject: ACPI / GPIO: Document ACPI GPIO mappings API Document the previously introduced method that can be used by device drivers to provide the GPIO subsystem with mappings between GPIO names (connection IDs) and GpioIo()/GpioInt() resources in _CRS. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg --- Documentation/acpi/gpio-properties.txt | 44 ++++++++++++++++++++++++++++++++++ Documentation/gpio/consumer.txt | 18 ++++++++++++++ 2 files changed, 62 insertions(+) (limited to 'Documentation') diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt index 3e45b8b7e4f2..ae36fcf86dc7 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/acpi/gpio-properties.txt @@ -50,3 +50,47 @@ it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. + +ACPI GPIO Mappings Provided by Drivers +-------------------------------------- + +There are systems in which the ACPI tables do not contain _DSD but provide _CRS +with GpioIo()/GpioInt() resources and device drivers still need to work with +them. + +In those cases ACPI device identification objects, _HID, _CID, _CLS, _SUB, _HRV, +available to the driver can be used to identify the device and that is supposed +to be sufficient to determine the meaning and purpose of all of the GPIO lines +listed by the GpioIo()/GpioInt() resources returned by _CRS. In other words, +the driver is supposed to know what to use the GpioIo()/GpioInt() resources for +once it has identified the device. Having done that, it can simply assign names +to the GPIO lines it is going to use and provide the GPIO subsystem with a +mapping between those names and the ACPI GPIO resources corresponding to them. + +To do that, the driver needs to define a mapping table as a NULL-terminated +array of struct acpi_gpio_mapping objects that each contain a name, a pointer +to an array of line data (struct acpi_gpio_params) objects and the size of that +array. Each struct acpi_gpio_params object consists of three fields, +crs_entry_index, line_index, active_low, representing the index of the target +GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target +line in that resource starting from zero, and the active-low flag for that line, +respectively, in analogy with the _DSD GPIO property format specified above. + +For the example Bluetooth device discussed previously the data structures in +question would look like this: + +static const struct acpi_gpio_params reset_gpio = { 1, 1, false }; +static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false }; + +static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = { + { "reset-gpio", &reset_gpio, 1 }, + { "shutdown-gpio", &shutdown_gpio, 1 }, + { }, +}; + +Next, the mapping table needs to be passed as the second argument to +acpi_dev_add_driver_gpios() that will register it with the ACPI device object +pointed to by its first argument. That should be done in the driver's .probe() +routine. On removal, the driver should unregister its GPIO mapping table by +calling acpi_dev_remove_driver_gpios() on the ACPI device object where that +table was previously registered. diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index 6ce544191ca6..859918db36b8 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -219,6 +219,24 @@ part of the IRQ interface, e.g. IRQF_TRIGGER_FALLING, as are system wakeup capabilities. +GPIOs and ACPI +============== + +On ACPI systems, GPIOs are described by GpioIo()/GpioInt() resources listed by +the _CRS configuration objects of devices. Those resources do not provide +connection IDs (names) for GPIOs, so it is necessary to use an additional +mechanism for this purpose. + +Systems compliant with ACPI 5.1 or newer may provide a _DSD configuration object +which, among other things, may be used to provide connection IDs for specific +GPIOs described by the GpioIo()/GpioInt() resources in _CRS. If that is the +case, it will be handled by the GPIO subsystem automatically. However, if the +_DSD is not present, the mappings between GpioIo()/GpioInt() resources and GPIO +connection IDs need to be provided by device drivers. + +For details refer to Documentation/acpi/gpio-properties.txt + + Interacting With the Legacy GPIO Subsystem ========================================== Many kernel subsystems still handle GPIOs using the legacy integer-based -- cgit v1.2.3-58-ga151 From 2f86dc4cddcb21290ca099e1dce2a53533c86e0b Mon Sep 17 00:00:00 2001 From: Dirk Brandewie Date: Thu, 6 Nov 2014 09:40:47 -0800 Subject: intel_pstate: Add support for HWP Add support of Hardware Managed Performance States (HWP) described in Volume 3 section 14.4 of the SDM. With HWP enbaled intel_pstate will no longer be responsible for selecting P states for the processor. intel_pstate will continue to register to the cpufreq core as the scaling driver for CPUs implementing HWP. In HWP mode intel_pstate provides three functions reporting frequency to the cpufreq core, support for the set_policy() interface from the core and maintaining the intel_pstate sysfs interface in /sys/devices/system/cpu/intel_pstate. User preferences expressed via the set_policy() interface or the sysfs interface are forwared to the CPU via the HWP MSR interface. Signed-off-by: Dirk Brandewie Signed-off-by: Rafael J. Wysocki --- Documentation/cpu-freq/intel-pstate.txt | 37 ++++++++---- Documentation/kernel-parameters.txt | 3 + arch/x86/include/uapi/asm/msr-index.h | 41 +++++++++++++ drivers/cpufreq/intel_pstate.c | 100 +++++++++++++++++++++++++++++++- 4 files changed, 167 insertions(+), 14 deletions(-) (limited to 'Documentation') diff --git a/Documentation/cpu-freq/intel-pstate.txt b/Documentation/cpu-freq/intel-pstate.txt index a69ffe1d54d5..765d7fc0e692 100644 --- a/Documentation/cpu-freq/intel-pstate.txt +++ b/Documentation/cpu-freq/intel-pstate.txt @@ -1,17 +1,28 @@ Intel P-state driver -------------------- -This driver implements a scaling driver with an internal governor for -Intel Core processors. The driver follows the same model as the -Transmeta scaling driver (longrun.c) and implements the setpolicy() -instead of target(). Scaling drivers that implement setpolicy() are -assumed to implement internal governors by the cpufreq core. All the -logic for selecting the current P state is contained within the -driver; no external governor is used by the cpufreq core. - -Intel SandyBridge+ processors are supported. - -New sysfs files for controlling P state selection have been added to +This driver provides an interface to control the P state selection for +SandyBridge+ Intel processors. The driver can operate two different +modes based on the processor model legacy and Hardware P state (HWP) +mode. + +In legacy mode the driver implements a scaling driver with an internal +governor for Intel Core processors. The driver follows the same model +as the Transmeta scaling driver (longrun.c) and implements the +setpolicy() instead of target(). Scaling drivers that implement +setpolicy() are assumed to implement internal governors by the cpufreq +core. All the logic for selecting the current P state is contained +within the driver; no external governor is used by the cpufreq core. + +In HWP mode P state selection is implemented in the processor +itself. The driver provides the interfaces between the cpufreq core and +the processor to control P state selection based on user preferences +and reporting frequency to the cpufreq core. In this mode the +internal governor code is disabled. + +In addtion to the interfaces provided by the cpufreq core for +controlling frequency the driver provides sysfs files for +controlling P state selection. These files have been added to /sys/devices/system/cpu/intel_pstate/ max_perf_pct: limits the maximum P state that will be requested by @@ -33,7 +44,9 @@ frequency is fiction for Intel Core processors. Even if the scaling driver selects a single P state the actual frequency the processor will run at is selected by the processor itself. -New debugfs files have also been added to /sys/kernel/debug/pstate_snb/ +For legacy mode debugfs files have also been added to allow tuning of +the internal governor algorythm. These files are located at +/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode. deadband d_gain_pct diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4c81a860cc2b..907a0f119bee 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1446,6 +1446,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. disable Do not enable intel_pstate as the default scaling driver for the supported processors + no_hwp + Do not enable hardware P state control (HWP) + if available. intremap= [X86-64, Intel-IOMMU] on enable Interrupt Remapping (default) diff --git a/arch/x86/include/uapi/asm/msr-index.h b/arch/x86/include/uapi/asm/msr-index.h index e21331ce368f..62838e54947d 100644 --- a/arch/x86/include/uapi/asm/msr-index.h +++ b/arch/x86/include/uapi/asm/msr-index.h @@ -152,6 +152,45 @@ #define MSR_CC6_DEMOTION_POLICY_CONFIG 0x00000668 #define MSR_MC6_DEMOTION_POLICY_CONFIG 0x00000669 +/* Hardware P state interface */ +#define MSR_PPERF 0x0000064e +#define MSR_PERF_LIMIT_REASONS 0x0000064f +#define MSR_PM_ENABLE 0x00000770 +#define MSR_HWP_CAPABILITIES 0x00000771 +#define MSR_HWP_REQUEST_PKG 0x00000772 +#define MSR_HWP_INTERRUPT 0x00000773 +#define MSR_HWP_REQUEST 0x00000774 +#define MSR_HWP_STATUS 0x00000777 + +/* CPUID.6.EAX */ +#define HWP_BASE_BIT (1<<7) +#define HWP_NOTIFICATIONS_BIT (1<<8) +#define HWP_ACTIVITY_WINDOW_BIT (1<<9) +#define HWP_ENERGY_PERF_PREFERENCE_BIT (1<<10) +#define HWP_PACKAGE_LEVEL_REQUEST_BIT (1<<11) + +/* IA32_HWP_CAPABILITIES */ +#define HWP_HIGHEST_PERF(x) (x & 0xff) +#define HWP_GUARANTEED_PERF(x) ((x & (0xff << 8)) >>8) +#define HWP_MOSTEFFICIENT_PERF(x) ((x & (0xff << 16)) >>16) +#define HWP_LOWEST_PERF(x) ((x & (0xff << 24)) >>24) + +/* IA32_HWP_REQUEST */ +#define HWP_MIN_PERF(x) (x & 0xff) +#define HWP_MAX_PERF(x) ((x & 0xff) << 8) +#define HWP_DESIRED_PERF(x) ((x & 0xff) << 16) +#define HWP_ENERGY_PERF_PREFERENCE(x) ((x & 0xff) << 24) +#define HWP_ACTIVITY_WINDOW(x) ((x & 0xff3) << 32) +#define HWP_PACKAGE_CONTROL(x) ((x & 0x1) << 42) + +/* IA32_HWP_STATUS */ +#define HWP_GUARANTEED_CHANGE(x) (x & 0x1) +#define HWP_EXCURSION_TO_MINIMUM(x) (x & 0x4) + +/* IA32_HWP_INTERRUPT */ +#define HWP_CHANGE_TO_GUARANTEED_INT(x) (x & 0x1) +#define HWP_EXCURSION_TO_MINIMUM_INT(x) (x & 0x2) + #define MSR_AMD64_MC0_MASK 0xc0010044 #define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x)) @@ -345,6 +384,8 @@ #define MSR_IA32_TEMPERATURE_TARGET 0x000001a2 +#define MSR_MISC_PWR_MGMT 0x000001aa + #define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0 #define ENERGY_PERF_BIAS_PERFORMANCE 0 #define ENERGY_PERF_BIAS_NORMAL 6 diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 27bb6d3877ed..ba35db092239 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -137,6 +137,7 @@ struct cpu_defaults { static struct pstate_adjust_policy pid_params; static struct pstate_funcs pstate_funcs; +static int hwp_active; struct perf_limits { int no_turbo; @@ -244,6 +245,34 @@ static inline void update_turbo_state(void) cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); } +#define PCT_TO_HWP(x) (x * 255 / 100) +static void intel_pstate_hwp_set(void) +{ + int min, max, cpu; + u64 value, freq; + + get_online_cpus(); + + for_each_online_cpu(cpu) { + rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); + min = PCT_TO_HWP(limits.min_perf_pct); + value &= ~HWP_MIN_PERF(~0L); + value |= HWP_MIN_PERF(min); + + max = PCT_TO_HWP(limits.max_perf_pct); + if (limits.no_turbo) { + rdmsrl( MSR_HWP_CAPABILITIES, freq); + max = HWP_GUARANTEED_PERF(freq); + } + + value &= ~HWP_MAX_PERF(~0L); + value |= HWP_MAX_PERF(max); + wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); + } + + put_online_cpus(); +} + /************************** debugfs begin ************************/ static int pid_param_set(void *data, u64 val) { @@ -279,6 +308,8 @@ static void __init intel_pstate_debug_expose_params(void) struct dentry *debugfs_parent; int i = 0; + if (hwp_active) + return; debugfs_parent = debugfs_create_dir("pstate_snb", NULL); if (IS_ERR_OR_NULL(debugfs_parent)) return; @@ -329,8 +360,12 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b, pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); return -EPERM; } + limits.no_turbo = clamp_t(int, input, 0, 1); + if (hwp_active) + intel_pstate_hwp_set(); + return count; } @@ -348,6 +383,8 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b, limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); + if (hwp_active) + intel_pstate_hwp_set(); return count; } @@ -363,6 +400,8 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b, limits.min_perf_pct = clamp_t(int, input, 0 , 100); limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); + if (hwp_active) + intel_pstate_hwp_set(); return count; } @@ -395,8 +434,16 @@ static void __init intel_pstate_sysfs_expose_params(void) rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group); BUG_ON(rc); } - /************************** sysfs end ************************/ + +static void intel_pstate_hwp_enable(void) +{ + hwp_active++; + pr_info("intel_pstate HWP enabled\n"); + + wrmsrl( MSR_PM_ENABLE, 0x1); +} + static int byt_get_min_pstate(void) { u64 value; @@ -648,6 +695,14 @@ static inline void intel_pstate_sample(struct cpudata *cpu) cpu->prev_mperf = mperf; } +static inline void intel_hwp_set_sample_time(struct cpudata *cpu) +{ + int delay; + + delay = msecs_to_jiffies(50); + mod_timer_pinned(&cpu->timer, jiffies + delay); +} + static inline void intel_pstate_set_sample_time(struct cpudata *cpu) { int delay; @@ -694,6 +749,14 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu) intel_pstate_set_pstate(cpu, cpu->pstate.current_pstate - ctl); } +static void intel_hwp_timer_func(unsigned long __data) +{ + struct cpudata *cpu = (struct cpudata *) __data; + + intel_pstate_sample(cpu); + intel_hwp_set_sample_time(cpu); +} + static void intel_pstate_timer_func(unsigned long __data) { struct cpudata *cpu = (struct cpudata *) __data; @@ -737,6 +800,11 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = { }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); +static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = { + ICPU(0x56, core_params), + {} +}; + static int intel_pstate_init_cpu(unsigned int cpunum) { struct cpudata *cpu; @@ -753,9 +821,14 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_get_cpu_pstates(cpu); init_timer_deferrable(&cpu->timer); - cpu->timer.function = intel_pstate_timer_func; cpu->timer.data = (unsigned long)cpu; cpu->timer.expires = jiffies + HZ/100; + + if (!hwp_active) + cpu->timer.function = intel_pstate_timer_func; + else + cpu->timer.function = intel_hwp_timer_func; + intel_pstate_busy_pid_reset(cpu); intel_pstate_sample(cpu); @@ -792,6 +865,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.no_turbo = 0; return 0; } + limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq; limits.min_perf_pct = clamp_t(int, limits.min_perf_pct, 0 , 100); limits.min_perf = div_fp(int_tofp(limits.min_perf_pct), int_tofp(100)); @@ -801,6 +875,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits.max_perf_pct = min(limits.max_policy_pct, limits.max_sysfs_pct); limits.max_perf = div_fp(int_tofp(limits.max_perf_pct), int_tofp(100)); + if (hwp_active) + intel_pstate_hwp_set(); + return 0; } @@ -823,6 +900,9 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) pr_info("intel_pstate CPU %d exiting\n", cpu_num); del_timer_sync(&all_cpu_data[cpu_num]->timer); + if (hwp_active) + return; + intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); } @@ -866,6 +946,7 @@ static struct cpufreq_driver intel_pstate_driver = { }; static int __initdata no_load; +static int __initdata no_hwp; static int intel_pstate_msrs_not_valid(void) { @@ -959,6 +1040,15 @@ static bool intel_pstate_platform_pwr_mgmt_exists(void) { struct acpi_table_header hdr; struct hw_vendor_info *v_info; + const struct x86_cpu_id *id; + u64 misc_pwr; + + id = x86_match_cpu(intel_pstate_cpu_oob_ids); + if (id) { + rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); + if ( misc_pwr & (1 << 8)) + return true; + } if (acpi_disabled || ACPI_FAILURE(acpi_get_table_header(ACPI_SIG_FADT, 0, &hdr))) @@ -982,6 +1072,7 @@ static int __init intel_pstate_init(void) int cpu, rc = 0; const struct x86_cpu_id *id; struct cpu_defaults *cpu_info; + struct cpuinfo_x86 *c = &boot_cpu_data; if (no_load) return -ENODEV; @@ -1011,6 +1102,9 @@ static int __init intel_pstate_init(void) if (!all_cpu_data) return -ENOMEM; + if (cpu_has(c,X86_FEATURE_HWP) && !no_hwp) + intel_pstate_hwp_enable(); + rc = cpufreq_register_driver(&intel_pstate_driver); if (rc) goto out; @@ -1041,6 +1135,8 @@ static int __init intel_pstate_setup(char *str) if (!strcmp(str, "disable")) no_load = 1; + if (!strcmp(str, "no_hwp")) + no_hwp = 1; return 0; } early_param("intel_pstate", intel_pstate_setup); -- cgit v1.2.3-58-ga151 From 97735da074fdd3fe39d975cad8760807df0d4388 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 15 Oct 2014 16:50:52 +0100 Subject: drivers: cpuidle: Add status property to ARM idle states On some platforms the device tree bindings must provide the kernel with a status flag for idle states, that defines whether the idle state is operational or not in the current configuration. This patch adds a status property to the ARM idle states compliant with ePAPR v1.1 and updates the DT parsing code accordingly. Acked-by: Kevin Hilman Signed-off-by: Lorenzo Pieralisi Signed-off-by: Daniel Lezcano --- Documentation/devicetree/bindings/arm/idle-states.txt | 14 ++++++++++++++ drivers/cpuidle/dt_idle_states.c | 3 +++ 2 files changed, 17 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 37375c7f3ccc..5e5151130c20 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -317,6 +317,20 @@ follows: In such systems entry-latency-us + exit-latency-us will exceed wakeup-latency-us by this duration. + - status: + Usage: Optional + Value type: + Definition: A standard device tree property [5] that indicates + the operational status of an idle-state. + If present, it shall be: + "okay": to indicate that the idle state is + operational. + "disabled": to indicate that the idle state has + been disabled in firmware so it is not + operational. + If the property is not present the idle-state must + be considered operational. + In addition to the properties listed above, a state node may require additional properties specifics to the entry-method defined in the idle-states node, please refer to the entry-method bindings diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index 52f4d11bbf3f..22840f40283c 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -169,6 +169,9 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, if (!state_node) break; + if (!of_device_is_available(state_node)) + continue; + if (!idle_state_valid(state_node, i, cpumask)) { pr_warn("%s idle state not valid, bailing out\n", state_node->full_name); -- cgit v1.2.3-58-ga151 From c00bc5df7c01a189843cb048cf29e2a445e0037a Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 15 Oct 2014 16:57:34 +0100 Subject: drivers: cpuidle: Add idle-state-name description to ARM idle states On ARM machines, where generally speaking the idle state numbering has no fixed and standard meaning it is useful to provide a description of the idle state inner workings for benchmarking and monitoring purposes. This patch adds a property to the idle states bindings that if present gives platform firmware a means of describing the idle state and export the string description to user space. The patch updates the DT parsing code accordingly to take the description, if present, into consideration. Acked-by: Kevin Hilman Signed-off-by: Lorenzo Pieralisi Signed-off-by: Daniel Lezcano --- Documentation/devicetree/bindings/arm/idle-states.txt | 6 ++++++ drivers/cpuidle/dt_idle_states.c | 7 ++++++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt index 5e5151130c20..a8274eabae2e 100644 --- a/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/Documentation/devicetree/bindings/arm/idle-states.txt @@ -331,6 +331,12 @@ follows: If the property is not present the idle-state must be considered operational. + - idle-state-name: + Usage: Optional + Value type: + Definition: A string used as a descriptive name for the idle + state. + In addition to the properties listed above, a state node may require additional properties specifics to the entry-method defined in the idle-states node, please refer to the entry-method bindings diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c index 22840f40283c..5301912cb84e 100644 --- a/drivers/cpuidle/dt_idle_states.c +++ b/drivers/cpuidle/dt_idle_states.c @@ -27,6 +27,7 @@ static int init_state_node(struct cpuidle_state *idle_state, { int err; const struct of_device_id *match_id; + const char *desc; match_id = of_match_node(matches, state_node); if (!match_id) @@ -73,6 +74,10 @@ static int init_state_node(struct cpuidle_state *idle_state, return -EINVAL; } + err = of_property_read_string(state_node, "idle-state-name", &desc); + if (err) + desc = state_node->name; + idle_state->flags = CPUIDLE_FLAG_TIME_VALID; if (of_property_read_bool(state_node, "local-timer-stop")) idle_state->flags |= CPUIDLE_FLAG_TIMER_STOP; @@ -82,7 +87,7 @@ static int init_state_node(struct cpuidle_state *idle_state, * and desc become string pointers */ strncpy(idle_state->name, state_node->name, CPUIDLE_NAME_LEN - 1); - strncpy(idle_state->desc, state_node->name, CPUIDLE_DESC_LEN - 1); + strncpy(idle_state->desc, desc, CPUIDLE_DESC_LEN - 1); return 0; } -- cgit v1.2.3-58-ga151 From ceb6c9c862c86423f41c1e20ecf8d454f837f519 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 29 Nov 2014 23:47:05 +0100 Subject: USB / PM: Drop CONFIG_PM_RUNTIME from the USB core After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Acked-by: Greg Kroah-Hartman --- Documentation/ABI/stable/sysfs-bus-usb | 14 ++++++-------- Documentation/ABI/testing/sysfs-bus-usb | 19 +++++++++---------- Documentation/usb/power-management.txt | 17 +++++++++-------- drivers/usb/core/driver.c | 6 +----- drivers/usb/core/hcd-pci.c | 11 ----------- drivers/usb/core/hcd.c | 12 ++++-------- drivers/usb/core/hub.c | 6 +++--- drivers/usb/core/port.c | 4 ++-- drivers/usb/core/sysfs.c | 13 ++++--------- drivers/usb/core/usb.c | 4 +--- drivers/usb/core/usb.h | 23 +++++++++-------------- drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/sl811-hcd.c | 5 ++--- drivers/usb/host/u132-hcd.c | 3 +-- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci.c | 29 ++++++++++++----------------- drivers/usb/phy/phy-msm-usb.c | 2 +- include/linux/usb.h | 2 +- include/linux/usb/hcd.h | 7 ++----- 19 files changed, 69 insertions(+), 112 deletions(-) (limited to 'Documentation') diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb index e2bc700a6f9c..831f15d9672f 100644 --- a/Documentation/ABI/stable/sysfs-bus-usb +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -32,10 +32,9 @@ Date: January 2008 KernelVersion: 2.6.25 Contact: Sarah Sharp Description: - If CONFIG_PM_RUNTIME is enabled then this file - is present. When read, it returns the total time (in msec) - that the USB device has been connected to the machine. This - file is read-only. + If CONFIG_PM is enabled, then this file is present. When read, + it returns the total time (in msec) that the USB device has been + connected to the machine. This file is read-only. Users: PowerTOP https://01.org/powertop/ @@ -45,10 +44,9 @@ Date: January 2008 KernelVersion: 2.6.25 Contact: Sarah Sharp Description: - If CONFIG_PM_RUNTIME is enabled then this file - is present. When read, it returns the total time (in msec) - that the USB device has been active, i.e. not in a suspended - state. This file is read-only. + If CONFIG_PM is enabled, then this file is present. When read, + it returns the total time (in msec) that the USB device has been + active, i.e. not in a suspended state. This file is read-only. Tools can use this file and the connected_duration file to compute the percentage of time that a device has been active. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 614d451cee41..e5cc7633d013 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -104,16 +104,15 @@ What: /sys/bus/usb/devices/.../power/usb2_hardware_lpm Date: September 2011 Contact: Andiry Xu Description: - If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device - is plugged in to a xHCI host which support link PM, it will - perform a LPM test; if the test is passed and host supports - USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will - be enabled for the device and the USB device directory will - contain a file named power/usb2_hardware_lpm. The file holds - a string value (enable or disable) indicating whether or not - USB2 hardware LPM is enabled for the device. Developer can - write y/Y/1 or n/N/0 to the file to enable/disable the - feature. + If CONFIG_PM is set and a USB 2.0 lpm-capable device is plugged + in to a xHCI host which support link PM, it will perform a LPM + test; if the test is passed and host supports USB2 hardware LPM + (xHCI 1.0 feature), USB2 hardware LPM will be enabled for the + device and the USB device directory will contain a file named + power/usb2_hardware_lpm. The file holds a string value (enable + or disable) indicating whether or not USB2 hardware LPM is + enabled for the device. Developer can write y/Y/1 or n/N/0 to + the file to enable/disable the feature. What: /sys/bus/usb/devices/.../removable Date: February 2012 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 7b90fe034c4b..b5f83911732a 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -47,14 +47,15 @@ dynamic PM is implemented in the USB subsystem, although system PM is covered to some extent (see Documentation/power/*.txt for more information about system PM). -Note: Dynamic PM support for USB is present only if the kernel was -built with CONFIG_USB_SUSPEND enabled (which depends on -CONFIG_PM_RUNTIME). System PM support is present only if the kernel -was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled. - -(Starting with the 3.10 kernel release, dynamic PM support for USB is -present whenever the kernel was built with CONFIG_PM_RUNTIME enabled. -The CONFIG_USB_SUSPEND option has been eliminated.) +System PM support is present only if the kernel was built with CONFIG_SUSPEND +or CONFIG_HIBERNATION enabled. Dynamic PM support for USB is present whenever +the kernel was built with CONFIG_PM enabled. + +[Historically, dynamic PM support for USB was present only if the +kernel had been built with CONFIG_USB_SUSPEND enabled (which depended on +CONFIG_PM_RUNTIME). Starting with the 3.10 kernel release, dynamic PM support +for USB was present whenever the kernel was built with CONFIG_PM_RUNTIME +enabled. The CONFIG_USB_SUSPEND option had been eliminated.] What is Remote Wakeup? diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 9bffd26cea05..874dec31a111 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1493,10 +1493,6 @@ int usb_resume(struct device *dev, pm_message_t msg) return status; } -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_RUNTIME - /** * usb_enable_autosuspend - allow a USB device to be autosuspended * @udev: the USB device which may be autosuspended @@ -1876,7 +1872,7 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) return ret; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ struct bus_type usb_bus_type = { .name = "usb", diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index efc953119ce2..9eb1cff28bd4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -429,7 +429,6 @@ static int check_root_hub_suspended(struct device *dev) return 0; } -#if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) static int suspend_common(struct device *dev, bool do_wakeup) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -528,7 +527,6 @@ static int resume_common(struct device *dev, int event) } return retval; } -#endif /* SLEEP || RUNTIME */ #ifdef CONFIG_PM_SLEEP @@ -607,8 +605,6 @@ static int hcd_pci_restore(struct device *dev) #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM_RUNTIME - static int hcd_pci_runtime_suspend(struct device *dev) { int retval; @@ -630,13 +626,6 @@ static int hcd_pci_runtime_resume(struct device *dev) return retval; } -#else - -#define hcd_pci_runtime_suspend NULL -#define hcd_pci_runtime_resume NULL - -#endif /* CONFIG_PM_RUNTIME */ - const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend = hcd_pci_suspend, .suspend_noirq = hcd_pci_suspend_noirq, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index a6efb4184f2b..278be0515e8e 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2258,10 +2258,6 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) return status; } -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_RUNTIME - /* Workqueue routine for root-hub remote wakeup */ static void hcd_resume_work(struct work_struct *work) { @@ -2293,7 +2289,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -2476,7 +2472,7 @@ struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif @@ -2790,7 +2786,7 @@ error_create_attr_group: hcd->rh_registered = 0; spin_unlock_irq(&hcd_root_hub_lock); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM cancel_work_sync(&hcd->wakeup_work); #endif mutex_lock(&usb_bus_list_lock); @@ -2858,7 +2854,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM cancel_work_sync(&hcd->wakeup_work); #endif diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b649fef2e35d..c9596525ba8c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1737,7 +1737,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) * - If user has indicated to prevent autosuspend by passing * usbcore.autosuspend = -1 then keep autosuspend disabled. */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM if (hdev->dev.power.autosuspend_delay >= 0) pm_runtime_set_autosuspend_delay(&hdev->dev, 0); #endif @@ -3449,7 +3449,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) return status; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM int usb_remote_wakeup(struct usb_device *udev) { @@ -4856,7 +4856,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, udev->state != USB_STATE_NOTATTACHED) { if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM } else if (udev->state == USB_STATE_SUSPENDED && udev->persist_enabled) { /* For a suspended device, treat this as a diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index cd3f9dc24a06..210618319f10 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -72,7 +72,7 @@ static void usb_port_device_release(struct device *dev) kfree(port_dev); } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int usb_port_runtime_resume(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); @@ -171,7 +171,7 @@ static int usb_port_runtime_suspend(struct device *dev) #endif static const struct dev_pm_ops usb_port_pm_ops = { -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM .runtime_suspend = usb_port_runtime_suspend, .runtime_resume = usb_port_runtime_resume, #endif diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 1236c6011c70..d26973844a4d 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -334,14 +334,6 @@ static void remove_persist_attributes(struct device *dev) &dev_attr_persist.attr, power_group_name); } -#else - -#define add_persist_attributes(dev) 0 -#define remove_persist_attributes(dev) do {} while (0) - -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_RUNTIME static ssize_t connected_duration_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -585,10 +577,13 @@ static void remove_power_attributes(struct device *dev) #else +#define add_persist_attributes(dev) 0 +#define remove_persist_attributes(dev) do {} while (0) + #define add_power_attributes(dev) 0 #define remove_power_attributes(dev) do {} while (0) -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ /* Descriptor fields */ diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2dd2362198d2..2a92b97f0144 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,7 +49,7 @@ const char *usbcore_name = "usbcore"; static bool nousb; /* Disable USB when built into kernel image */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ module_param_named(autosuspend, usb_autosuspend_delay, int, 0644); @@ -348,11 +348,9 @@ static const struct dev_pm_ops usb_device_pm_ops = { .thaw = usb_dev_thaw, .poweroff = usb_dev_poweroff, .restore = usb_dev_restore, -#ifdef CONFIG_PM_RUNTIME .runtime_suspend = usb_runtime_suspend, .runtime_resume = usb_runtime_resume, .runtime_idle = usb_runtime_idle, -#endif }; #endif /* CONFIG_PM */ diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index b1b34d0557c9..7eb1e26798e5 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -75,6 +75,14 @@ extern int usb_resume_complete(struct device *dev); extern int usb_port_suspend(struct usb_device *dev, pm_message_t msg); extern int usb_port_resume(struct usb_device *dev, pm_message_t msg); +extern void usb_autosuspend_device(struct usb_device *udev); +extern int usb_autoresume_device(struct usb_device *udev); +extern int usb_remote_wakeup(struct usb_device *dev); +extern int usb_runtime_suspend(struct device *dev); +extern int usb_runtime_resume(struct device *dev); +extern int usb_runtime_idle(struct device *dev); +extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable); + #else static inline int usb_port_suspend(struct usb_device *udev, pm_message_t msg) @@ -87,20 +95,6 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg) return 0; } -#endif - -#ifdef CONFIG_PM_RUNTIME - -extern void usb_autosuspend_device(struct usb_device *udev); -extern int usb_autoresume_device(struct usb_device *udev); -extern int usb_remote_wakeup(struct usb_device *dev); -extern int usb_runtime_suspend(struct device *dev); -extern int usb_runtime_resume(struct device *dev); -extern int usb_runtime_idle(struct device *dev); -extern int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable); - -#else - #define usb_autosuspend_device(udev) do {} while (0) static inline int usb_autoresume_device(struct usb_device *udev) { @@ -111,6 +105,7 @@ static inline int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable) { return 0; } + #endif extern struct bus_type usb_bus_type; diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index ca7b964124af..851006a0d97b 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -305,7 +305,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); #endif diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index ad0c348e68e9..25fb1da8d3d7 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -22,7 +22,7 @@ * and usb-storage. * * TODO: - * - usb suspend/resume triggered by sl811 (with PM_RUNTIME) + * - usb suspend/resume triggered by sl811 * - various issues noted in the code * - performance work; use both register banks; ... * - use urb->iso_frame_desc[] with ISO transfers @@ -1752,8 +1752,7 @@ sl811h_probe(struct platform_device *dev) #ifdef CONFIG_PM /* for this device there's no useful distinction between the controller - * and its root hub, except that the root hub only gets direct PM calls - * when CONFIG_PM_RUNTIME is enabled. + * and its root hub. */ static int diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index c0671750671f..bf86630b3cea 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3144,8 +3144,7 @@ static int u132_probe(struct platform_device *pdev) #ifdef CONFIG_PM /* * for this device there's no useful distinction between the controller - * and its root hub, except that the root hub only gets direct PM calls - * when CONFIG_PM_RUNTIME is enabled. + * and its root hub. */ static int u132_suspend(struct platform_device *pdev, pm_message_t state) { diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 696160d48ae8..f674abd76865 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1146,7 +1146,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) set_bit(port_index, &bus_state->bus_suspended); } /* USB core sets remote wake mask for USB 3.0 hubs, - * including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME + * including the USB 3.0 roothub, but only if CONFIG_PM * is enabled, so also enable remote wake here. */ if (hcd->self.root_hub->do_remote_wakeup diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2a5d45b4cb15..61173ca9cb8f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4024,7 +4024,7 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci, return ret; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM /* BESL to HIRD Encoding array for USB2 LPM */ static int xhci_besl_encoding[16] = {125, 150, 200, 300, 400, 500, 1000, 2000, @@ -4239,24 +4239,8 @@ int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) return 0; } -#else - -int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, - struct usb_device *udev, int enable) -{ - return 0; -} - -int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) -{ - return 0; -} - -#endif /* CONFIG_PM_RUNTIME */ - /*---------------------- USB 3.0 Link PM functions ------------------------*/ -#ifdef CONFIG_PM /* Service interval in nanoseconds = 2^(bInterval - 1) * 125us * 1000ns / 1us */ static unsigned long long xhci_service_interval_to_ns( struct usb_endpoint_descriptor *desc) @@ -4687,6 +4671,17 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd, } #else /* CONFIG_PM */ +int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd, + struct usb_device *udev, int enable) +{ + return 0; +} + +int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + return 0; +} + int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 7843ef7dd0ff..29be0e654ecc 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1761,7 +1761,7 @@ static int msm_otg_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM static int msm_otg_runtime_idle(struct device *dev) { struct msm_otg *motg = dev_get_drvdata(dev); diff --git a/include/linux/usb.h b/include/linux/usb.h index 447a7e2fc19b..f89c24a03bd9 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -637,7 +637,7 @@ static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index) #endif /* USB autosuspend and autoresume */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM extern void usb_enable_autosuspend(struct usb_device *udev); extern void usb_disable_autosuspend(struct usb_device *udev); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index cd96a2bc3388..668898e29d0e 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -93,7 +93,7 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ -#ifdef CONFIG_PM_RUNTIME +#ifdef CONFIG_PM struct work_struct wakeup_work; /* for remote wakeup */ #endif @@ -625,16 +625,13 @@ extern int usb_find_interface_driver(struct usb_device *dev, extern void usb_root_hub_lost_power(struct usb_device *rhdev); extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); -#endif /* CONFIG_PM */ - -#ifdef CONFIG_PM_RUNTIME extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); #else static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) { return; } -#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ -- cgit v1.2.3-58-ga151