From 562d897d15a6e2bab3cc9b4c172286b612834fe8 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 15 Sep 2015 10:50:14 -0600 Subject: net: Add documentation for VRF device Signed-off-by: David Ahern Signed-off-by: David S. Miller --- Documentation/networking/vrf.txt | 96 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/networking/vrf.txt (limited to 'Documentation') diff --git a/Documentation/networking/vrf.txt b/Documentation/networking/vrf.txt new file mode 100644 index 000000000000..031ef4a63485 --- /dev/null +++ b/Documentation/networking/vrf.txt @@ -0,0 +1,96 @@ +Virtual Routing and Forwarding (VRF) +==================================== +The VRF device combined with ip rules provides the ability to create virtual +routing and forwarding domains (aka VRFs, VRF-lite to be specific) in the +Linux network stack. One use case is the multi-tenancy problem where each +tenant has their own unique routing tables and in the very least need +different default gateways. + +Processes can be "VRF aware" by binding a socket to the VRF device. Packets +through the socket then use the routing table associated with the VRF +device. An important feature of the VRF device implementation is that it +impacts only Layer 3 and above so L2 tools (e.g., LLDP) are not affected +(ie., they do not need to be run in each VRF). The design also allows +the use of higher priority ip rules (Policy Based Routing, PBR) to take +precedence over the VRF device rules directing specific traffic as desired. + +In addition, VRF devices allow VRFs to be nested within namespaces. For +example network namespaces provide separation of network interfaces at L1 +(Layer 1 separation), VLANs on the interfaces within a namespace provide +L2 separation and then VRF devices provide L3 separation. + +Design +------ +A VRF device is created with an associated route table. Network interfaces +are then enslaved to a VRF device: + + +-----------------------------+ + | vrf-blue | ===> route table 10 + +-----------------------------+ + | | | + +------+ +------+ +-------------+ + | eth1 | | eth2 | ... | bond1 | + +------+ +------+ +-------------+ + | | + +------+ +------+ + | eth8 | | eth9 | + +------+ +------+ + +Packets received on an enslaved device and are switched to the VRF device +using an rx_handler which gives the impression that packets flow through +the VRF device. Similarly on egress routing rules are used to send packets +to the VRF device driver before getting sent out the actual interface. This +allows tcpdump on a VRF device to capture all packets into and out of the +VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied +using the VRF device to specify rules that apply to the VRF domain as a whole. + +[1] Packets in the forwarded state do not flow through the device, so those + packets are not seen by tcpdump. Will revisit this limitation in a + future release. + +[2] Iptables on ingress is limited to NF_INET_PRE_ROUTING only with skb->dev + set to real ingress device and egress is limited to NF_INET_POST_ROUTING. + Will revisit this limitation in a future release. + + +Setup +----- +1. VRF device is created with an association to a FIB table. + e.g, ip link add vrf-blue type vrf table 10 + ip link set dev vrf-blue up + +2. Rules are added that send lookups to the associated FIB table when the + iif or oif is the VRF device. e.g., + ip ru add oif vrf-blue table 10 + ip ru add iif vrf-blue table 10 + + Set the default route for the table (and hence default route for the VRF). + e.g, ip route add table 10 prohibit default + +3. Enslave L3 interfaces to a VRF device. + e.g, ip link set dev eth1 master vrf-blue + + Local and connected routes for enslaved devices are automatically moved to + the table associated with VRF device. Any additional routes depending on + the enslaved device will need to be reinserted following the enslavement. + +4. Additional VRF routes are added to associated table. + e.g., ip route add table 10 ... + + +Applications +------------ +Applications that are to work within a VRF need to bind their socket to the +VRF device: + + setsockopt(sd, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1); + +or to specify the output device using cmsg and IP_PKTINFO. + + +Limitations +----------- +VRF device currently only works for IPv4. Support for IPv6 is under development. + +Index of original ingress interface is not available via cmsg. Will address +soon. -- cgit v1.2.3-58-ga151 From 2e64126bb0fb581b55e52e51ec451ebb0d6769c8 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 15 Sep 2015 10:33:07 +0200 Subject: net: qdisc: enhance default_qdisc documentation Aside from some lingual cleanup, point out which interfaces are not or partly covered by this setting. Signed-off-by: Phil Sutter Acked-by: Cong Wang Signed-off-by: David S. Miller --- Documentation/sysctl/net.txt | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'Documentation') diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt index 6294b5186ae5..809ab6efcc74 100644 --- a/Documentation/sysctl/net.txt +++ b/Documentation/sysctl/net.txt @@ -54,13 +54,15 @@ default_qdisc -------------- The default queuing discipline to use for network devices. This allows -overriding the default queue discipline of pfifo_fast with an -alternative. Since the default queuing discipline is created with the -no additional parameters so is best suited to queuing disciplines that -work well without configuration like stochastic fair queue (sfq), -CoDel (codel) or fair queue CoDel (fq_codel). Don't use queuing disciplines -like Hierarchical Token Bucket or Deficit Round Robin which require setting -up classes and bandwidths. +overriding the default of pfifo_fast with an alternative. Since the default +queuing discipline is created without additional parameters so is best suited +to queuing disciplines that work well without configuration like stochastic +fair queue (sfq), CoDel (codel) or fair queue CoDel (fq_codel). Don't use +queuing disciplines like Hierarchical Token Bucket or Deficit Round Robin +which require setting up classes and bandwidths. Note that physical multiqueue +interfaces still use mq as root qdisc, which in turn uses this default for its +leaves. Virtual devices (like e.g. lo or veth) ignore this setting and instead +default to noqueue. Default: pfifo_fast busy_read -- cgit v1.2.3-58-ga151