From f71b10be4c8a24fcb3d17f3161e31cf09c66ea2f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 12 Feb 2015 09:38:40 +0100 Subject: of: Add vendor prefix for Arasan PATA(pata_arasan_cf.c) and SDHCI(sdhci-of-arasan.c) drivers are already using this prefix. Signed-off-by: Michal Simek Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389ca1347a77..db0e94f26149 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -20,6 +20,7 @@ amlogic Amlogic, Inc. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) +arasan Arasan Chip Systems arm ARM Ltd. armadeus ARMadeus Systems SARL asahi-kasei Asahi Kasei Corp. -- cgit v1.2.3-58-ga151 From 25e8f336e535d10c30216e1ba330fbea98dfccc5 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Wed, 18 Feb 2015 23:29:38 +0100 Subject: serial: add device tree binding documentation for ETRAX FS UART Signed-off-by: Niklas Cassel Signed-off-by: Rob Herring --- .../devicetree/bindings/serial/axis,etraxfs-uart.txt | 19 +++++++++++++++++++ Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt new file mode 100644 index 000000000000..ebcbb62c0a76 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -0,0 +1,19 @@ +ETRAX FS UART + +Required properties: +- compatible : "axis,etraxfs-uart" +- reg: offset and length of the register set for the device. +- interrupts: device interrupt + +Optional properties: +- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD + line respectively. + +Example: + +serial@b00260000 { + compatible = "axis,etraxfs-uart"; + reg = <0xb0026000 0x1000>; + interrupts = <68>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index db0e94f26149..fae26d014aaf 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -28,6 +28,7 @@ atmel Atmel Corporation auo AU Optronics Corporation avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. +axis Axis Communications AB bosch Bosch Sensortec GmbH brcm Broadcom Corporation buffalo Buffalo, Inc. -- cgit v1.2.3-58-ga151 From 20aa4d8ae8d2ada8f959364ebc096b8841245456 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Fri, 16 Jan 2015 18:00:07 +0800 Subject: Documentation: DT: Renamed of-serial.txt to 8250.txt The file of-serial.txt was only for 8250 compatible UART implementations, so renamed it to 8250.txt to avoid confusing other persons. This is suggested by Arnd, see: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291455.html Signed-off-by: Chunyan Zhang Acked-by: Mark Rutland Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/serial/8250.txt | 66 ++++++++++++++++++++++ .../devicetree/bindings/serial/of-serial.txt | 66 ---------------------- 2 files changed, 66 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/8250.txt delete mode 100644 Documentation/devicetree/bindings/serial/of-serial.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/serial/8250.txt b/Documentation/devicetree/bindings/serial/8250.txt new file mode 100644 index 000000000000..91d5ab0e60fc --- /dev/null +++ b/Documentation/devicetree/bindings/serial/8250.txt @@ -0,0 +1,66 @@ +* UART (Universal Asynchronous Receiver/Transmitter) + +Required properties: +- compatible : one of: + - "ns8250" + - "ns16450" + - "ns16550a" + - "ns16550" + - "ns16750" + - "ns16850" + - For Tegra20, must contain "nvidia,tegra20-uart" + - For other Tegra, must contain '"nvidia,-uart", + "nvidia,tegra20-uart"' where is tegra30, tegra114, tegra124, + tegra132, or tegra210. + - "nxp,lpc3220-uart" + - "ralink,rt2880-uart" + - "ibm,qpace-nwp-serial" + - "altr,16550-FIFO32" + - "altr,16550-FIFO64" + - "altr,16550-FIFO128" + - "fsl,16550-FIFO64" + - "fsl,ns16550" + - "serial" if the port type is unknown. +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clock-frequency : the input clock frequency for the UART + or + clocks phandle to refer to the clk used as per Documentation/devicetree + /bindings/clock/clock-bindings.txt + +Optional properties: +- current-speed : the current active speed of the UART. +- reg-offset : offset to apply to the mapbase from the start of the registers. +- reg-shift : quantity to shift the register offsets by. +- reg-io-width : the size (in bytes) of the IO accesses that should be + performed on the device. There are some systems that require 32-bit + accesses to the UART (e.g. TI davinci). +- used-by-rtas : set to indicate that the port is in use by the OpenFirmware + RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode +- fifo-size: the fifo size of the UART. +- auto-flow-control: one way to enable automatic flow control support. The + driver is allowed to detect support for the capability even without this + property. + +Note: +* fsl,ns16550: + ------------ + Freescale DUART is very similar to the PC16552D (and to a + pair of NS16550A), albeit with some nonstandard behavior such as + erratum A-004737 (relating to incorrect BRK handling). + + Represents a single port that is compatible with the DUART found + on many Freescale chips (examples include mpc8349, mpc8548, + mpc8641d, p4080 and ls2085a). + +Example: + + uart@80230000 { + compatible = "ns8250"; + reg = <0x80230000 0x100>; + clock-frequency = <3686400>; + interrupts = <10>; + reg-shift = <2>; + }; diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt deleted file mode 100644 index 91d5ab0e60fc..000000000000 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ /dev/null @@ -1,66 +0,0 @@ -* UART (Universal Asynchronous Receiver/Transmitter) - -Required properties: -- compatible : one of: - - "ns8250" - - "ns16450" - - "ns16550a" - - "ns16550" - - "ns16750" - - "ns16850" - - For Tegra20, must contain "nvidia,tegra20-uart" - - For other Tegra, must contain '"nvidia,-uart", - "nvidia,tegra20-uart"' where is tegra30, tegra114, tegra124, - tegra132, or tegra210. - - "nxp,lpc3220-uart" - - "ralink,rt2880-uart" - - "ibm,qpace-nwp-serial" - - "altr,16550-FIFO32" - - "altr,16550-FIFO64" - - "altr,16550-FIFO128" - - "fsl,16550-FIFO64" - - "fsl,ns16550" - - "serial" if the port type is unknown. -- reg : offset and length of the register set for the device. -- interrupts : should contain uart interrupt. -- clock-frequency : the input clock frequency for the UART - or - clocks phandle to refer to the clk used as per Documentation/devicetree - /bindings/clock/clock-bindings.txt - -Optional properties: -- current-speed : the current active speed of the UART. -- reg-offset : offset to apply to the mapbase from the start of the registers. -- reg-shift : quantity to shift the register offsets by. -- reg-io-width : the size (in bytes) of the IO accesses that should be - performed on the device. There are some systems that require 32-bit - accesses to the UART (e.g. TI davinci). -- used-by-rtas : set to indicate that the port is in use by the OpenFirmware - RTAS and should not be registered. -- no-loopback-test: set to indicate that the port does not implements loopback - test mode -- fifo-size: the fifo size of the UART. -- auto-flow-control: one way to enable automatic flow control support. The - driver is allowed to detect support for the capability even without this - property. - -Note: -* fsl,ns16550: - ------------ - Freescale DUART is very similar to the PC16552D (and to a - pair of NS16550A), albeit with some nonstandard behavior such as - erratum A-004737 (relating to incorrect BRK handling). - - Represents a single port that is compatible with the DUART found - on many Freescale chips (examples include mpc8349, mpc8548, - mpc8641d, p4080 and ls2085a). - -Example: - - uart@80230000 { - compatible = "ns8250"; - reg = <0x80230000 0x100>; - clock-frequency = <3686400>; - interrupts = <10>; - reg-shift = <2>; - }; -- cgit v1.2.3-58-ga151 From d1e9fa98387549a24633fb6b00a26edb34382488 Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Thu, 5 Mar 2015 10:53:11 -0500 Subject: dt: submitting-patches: clarify that DT maintainers are to be cced on bindings The exact steps provided for submitting binding patches can be read as requiring the bindings to be sent only to the devicetree@vger.kernel.org list. Since the DT maintainers would like to be Cced on any binding submissions, make this requirement explicit in step 2. Signed-off-by: Matt Porter Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/submitting-patches.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt index 56742bc70218..7d44eae7ab0b 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.txt @@ -12,6 +12,9 @@ I. For patch submitters devicetree@vger.kernel.org + and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify + all of the DT maintainers. + 3) The Documentation/ portion of the patch should come in the series before the code implementing the binding. -- cgit v1.2.3-58-ga151