From a2797beadfcb5a0974a30929b613b4d1adb023d1 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 4 Apr 2013 15:16:15 -0500 Subject: gpio/omap: force restore if context loss is not detectable When booting with device-tree the function pointer for detecting context loss is not populated. Ideally, the pm_runtime framework should be enhanced to allow a means for reporting context/state loss and we could avoid populating such function pointers altogether. In the interim until a generic non-device specific solution is in place, force a restore of the gpio bank when enabling the gpio controller. Adds a new device-tree property for the OMAP GPIO controller to indicate if the GPIO controller is located in a power-domain that never loses power and hence will always maintain its logic state. Signed-off-by: Jon Hunter Acked-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/gpio/gpio-omap.txt | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt index bff51a2fee1e..1b524c0c79fe 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt @@ -20,8 +20,11 @@ Required properties: 8 = active low level-sensitive. OMAP specific properties: -- ti,hwmods: Name of the hwmod associated to the GPIO: - "gpio", being the 1-based instance number from the HW spec +- ti,hwmods: Name of the hwmod associated to the GPIO: + "gpio", being the 1-based instance number + from the HW spec. +- ti,gpio-always-on: Indicates if a GPIO bank is always powered and + so will never lose its logic state. Example: -- cgit v1.2.3-58-ga151 From 97ddb1c88b4ebe057b63346660abfee165ddd468 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Thu, 4 Apr 2013 12:02:02 +0200 Subject: gpio: mcp23s08: convert driver to DT This converts the mcp23s08 driver to be able to be used with device tree. There is a "spi-present-mask" device tree property, that allows to use multiple of this spi chips on the same chipselect. v4: - removed the ability to specify the pullup from device tree - updated binding doc v3: - removed mcp,chips device tree property in favour of a mcp,spi-present-mask and a flag for the pullup of every gpio - seperated the match table. Now there is one for i2c and one for spi - do the of reading stuff on stack of the probe function - no devm any more v2: - squashed booth patches together - fixed build warning, when CONFIG_OF is not defined - use of_match_ptr macro for of_match_table Signed-off-by: Lars Poeschel Signed-off-by: Linus Walleij --- .../devicetree/bindings/gpio/gpio-mcp23s08.txt | 47 +++++++ drivers/gpio/gpio-mcp23s08.c | 137 ++++++++++++++++----- 2 files changed, 153 insertions(+), 31 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt new file mode 100644 index 000000000000..629d0ef17308 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -0,0 +1,47 @@ +Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for +8-/16-bit I/O expander with serial interface (I2C/SPI) + +Required properties: +- compatible : Should be + - "mcp,mcp23s08" for 8 GPIO SPI version + - "mcp,mcp23s17" for 16 GPIO SPI version + - "mcp,mcp23008" for 8 GPIO I2C version or + - "mcp,mcp23017" for 16 GPIO I2C version of the chip +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. Flags are currently unused. +- gpio-controller : Marks the device node as a GPIO controller. +- reg : For an address on its bus. I2C uses this a the I2C address of the chip. + SPI uses this to specify the chipselect line which the chip is + connected to. The driver and the SPI variant of the chip support + multiple chips on the same chipselect. Have a look at + mcp,spi-present-mask below. + +Required device specific properties (only for SPI chips): +- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI + chips - as the name suggests. Multiple SPI chips can share the same + SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a + chip connected with the corresponding spi address set. For example if + you have a chip with address 3 connected, you have to set bit3 to 1, + which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not + possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at + least one bit to 1 for SPI chips. +- spi-max-frequency = The maximum frequency this chip is able to handle + +Example I2C: +gpiom1: gpio@20 { + compatible = "mcp,mcp23017"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; +}; + +Example SPI: +gpiom1: gpio@0 { + compatible = "mcp,mcp23s17"; + gpio-controller; + #gpio-cells = <2>; + spi-present-mask = <0x01>; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c index 3cea0ea79e80..6a4470b84488 100644 --- a/drivers/gpio/gpio-mcp23s08.c +++ b/drivers/gpio/gpio-mcp23s08.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include /** * MCP types supported by driver @@ -383,6 +385,10 @@ static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, mcp->chip.direction_output = mcp23s08_direction_output; mcp->chip.set = mcp23s08_set; mcp->chip.dbg_show = mcp23s08_dbg_show; +#ifdef CONFIG_OF + mcp->chip.of_gpio_n_cells = 2; + mcp->chip.of_node = dev->of_node; +#endif switch (type) { #ifdef CONFIG_SPI_MASTER @@ -473,6 +479,35 @@ fail: /*----------------------------------------------------------------------*/ +#ifdef CONFIG_OF +#ifdef CONFIG_SPI_MASTER +static struct of_device_id mcp23s08_spi_of_match[] = { + { + .compatible = "mcp,mcp23s08", .data = (void *) MCP_TYPE_S08, + }, + { + .compatible = "mcp,mcp23s17", .data = (void *) MCP_TYPE_S17, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match); +#endif + +#if IS_ENABLED(CONFIG_I2C) +static struct of_device_id mcp23s08_i2c_of_match[] = { + { + .compatible = "mcp,mcp23008", .data = (void *) MCP_TYPE_008, + }, + { + .compatible = "mcp,mcp23017", .data = (void *) MCP_TYPE_017, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match); +#endif +#endif /* CONFIG_OF */ + + #if IS_ENABLED(CONFIG_I2C) static int mcp230xx_probe(struct i2c_client *client, @@ -480,12 +515,23 @@ static int mcp230xx_probe(struct i2c_client *client, { struct mcp23s08_platform_data *pdata; struct mcp23s08 *mcp; - int status; - - pdata = client->dev.platform_data; - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&client->dev, "invalid or missing platform data\n"); - return -EINVAL; + int status, base, pullups; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(mcp23s08_i2c_of_match), + &client->dev); + if (match) { + base = -1; + pullups = 0; + } else { + pdata = client->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&client->dev, + "invalid or missing platform data\n"); + return -EINVAL; + } + base = pdata->base; + pullups = pdata->chip[0].pullups; } mcp = kzalloc(sizeof *mcp, GFP_KERNEL); @@ -493,8 +539,7 @@ static int mcp230xx_probe(struct i2c_client *client, return -ENOMEM; status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr, - id->driver_data, pdata->base, - pdata->chip[0].pullups); + id->driver_data, base, pullups); if (status) goto fail; @@ -531,6 +576,7 @@ static struct i2c_driver mcp230xx_driver = { .driver = { .name = "mcp230xx", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mcp23s08_i2c_of_match), }, .probe = mcp230xx_probe, .remove = mcp230xx_remove, @@ -565,28 +611,55 @@ static int mcp23s08_probe(struct spi_device *spi) unsigned chips = 0; struct mcp23s08_driver_data *data; int status, type; - unsigned base; - - type = spi_get_device_id(spi)->driver_data; - - pdata = spi->dev.platform_data; - if (!pdata || !gpio_is_valid(pdata->base)) { - dev_dbg(&spi->dev, "invalid or missing platform data\n"); - return -EINVAL; - } + unsigned base = -1, + ngpio = 0, + pullups[ARRAY_SIZE(pdata->chip)]; + const struct of_device_id *match; + u32 spi_present_mask = 0; + + match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev); + if (match) { + type = (int)match->data; + status = of_property_read_u32(spi->dev.of_node, + "mcp,spi-present-mask", &spi_present_mask); + if (status) { + dev_err(&spi->dev, "DT has no spi-present-mask\n"); + return -ENODEV; + } + if ((spi_present_mask <= 0) || (spi_present_mask >= 256)) { + dev_err(&spi->dev, "invalid spi-present-mask\n"); + return -ENODEV; + } - for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { - if (!pdata->chip[addr].is_present) - continue; - chips++; - if ((type == MCP_TYPE_S08) && (addr > 3)) { - dev_err(&spi->dev, - "mcp23s08 only supports address 0..3\n"); + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) + pullups[addr] = 0; + } else { + type = spi_get_device_id(spi)->driver_data; + pdata = spi->dev.platform_data; + if (!pdata || !gpio_is_valid(pdata->base)) { + dev_dbg(&spi->dev, + "invalid or missing platform data\n"); return -EINVAL; } + + for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { + if (!pdata->chip[addr].is_present) + continue; + chips++; + if ((type == MCP_TYPE_S08) && (addr > 3)) { + dev_err(&spi->dev, + "mcp23s08 only supports address 0..3\n"); + return -EINVAL; + } + spi_present_mask |= 1 << addr; + pullups[addr] = pdata->chip[addr].pullups; + } + + if (!chips) + return -ENODEV; + + base = pdata->base; } - if (!chips) - return -ENODEV; data = kzalloc(sizeof *data + chips * sizeof(struct mcp23s08), GFP_KERNEL); @@ -594,21 +667,22 @@ static int mcp23s08_probe(struct spi_device *spi) return -ENOMEM; spi_set_drvdata(spi, data); - base = pdata->base; for (addr = 0; addr < ARRAY_SIZE(pdata->chip); addr++) { - if (!pdata->chip[addr].is_present) + if (!(spi_present_mask & (1 << addr))) continue; chips--; data->mcp[addr] = &data->chip[chips]; status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi, 0x40 | (addr << 1), type, base, - pdata->chip[addr].pullups); + pullups[addr]); if (status < 0) goto fail; - base += (type == MCP_TYPE_S17) ? 16 : 8; + if (base != -1) + base += (type == MCP_TYPE_S17) ? 16 : 8; + ngpio += (type == MCP_TYPE_S17) ? 16 : 8; } - data->ngpio = base - pdata->base; + data->ngpio = ngpio; /* NOTE: these chips have a relatively sane IRQ framework, with * per-signal masking and level/edge triggering. It's not yet @@ -668,6 +742,7 @@ static struct spi_driver mcp23s08_driver = { .driver = { .name = "mcp23s08", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(mcp23s08_spi_of_match), }, }; -- cgit v1.2.3-58-ga151 From 12028d2d216220618f76284af5f8ed510b11da55 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 3 Apr 2013 13:56:54 +0300 Subject: gpiolib-acpi: introduce acpi_get_gpio_by_index() helper Instead of open-coding ACPI GPIO resource lookup in each driver, we provide a helper function analogous to Device Tree version that allows drivers to specify which GPIO resource they are interested (using an index to the GPIO resources). The function then finds out the correct resource, translates the ACPI GPIO number to the corresponding Linux GPIO number and returns that. Signed-off-by: Mika Westerberg Acked-by: Rafael J. Wysocki Signed-off-by: Linus Walleij --- Documentation/acpi/enumeration.txt | 32 +++++++++++++++- drivers/gpio/gpiolib-acpi.c | 77 ++++++++++++++++++++++++++++++++++++++ include/linux/acpi_gpio.h | 17 +++++++++ 3 files changed, 125 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index 94a656131885..b0d541042ac6 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -199,6 +199,8 @@ the device to the driver. For example: { Name (SBUF, ResourceTemplate() { + ... + // Used to power on/off the device GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) @@ -206,10 +208,20 @@ the device to the driver. For example: // Pin List 0x0055 } + + // Interrupt for the device + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, + 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) + { + // Pin list + 0x0058 + } + ... - Return (SBUF) } + + Return (SBUF) } These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" @@ -220,6 +232,24 @@ The driver can do this by including and then calling acpi_get_gpio(path, gpio). This will return the Linux GPIO number or negative errno if there was no translation found. +In a simple case of just getting the Linux GPIO number from device +resources one can use acpi_get_gpio_by_index() helper function. It takes +pointer to the device and index of the GpioIo/GpioInt descriptor in the +device resources list. For example: + + int gpio_irq, gpio_power; + int ret; + + gpio_irq = acpi_get_gpio_by_index(dev, 1, NULL); + if (gpio_irq < 0) + /* handle error */ + + gpio_power = acpi_get_gpio_by_index(dev, 0, NULL); + if (gpio_power < 0) + /* handle error */ + + /* Now we can use the GPIO numbers */ + Other GpioIo parameters must be converted first by the driver to be suitable to the gpiolib before passing them. diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 89336c4f82cd..5c1ef2b3ef18 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -201,6 +201,83 @@ void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) } EXPORT_SYMBOL(acpi_gpiochip_request_interrupts); +struct acpi_gpio_lookup { + struct acpi_gpio_info info; + int index; + int gpio; + int n; +}; + +static int acpi_find_gpio(struct acpi_resource *ares, void *data) +{ + struct acpi_gpio_lookup *lookup = data; + + if (ares->type != ACPI_RESOURCE_TYPE_GPIO) + return 1; + + if (lookup->n++ == lookup->index && lookup->gpio < 0) { + const struct acpi_resource_gpio *agpio = &ares->data.gpio; + + lookup->gpio = acpi_get_gpio(agpio->resource_source.string_ptr, + agpio->pin_table[0]); + lookup->info.gpioint = + agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT; + } + + return 1; +} + +/** + * acpi_get_gpio_by_index() - get a GPIO number from device resources + * @dev: pointer to a device to get GPIO from + * @index: index of GpioIo/GpioInt resource (starting from %0) + * @info: info pointer to fill in (optional) + * + * Function goes through ACPI resources for @dev and based on @index looks + * up a GpioIo/GpioInt resource, translates it to the Linux GPIO number, + * and returns it. @index matches GpioIo/GpioInt resources only so if there + * are total %3 GPIO resources, the index goes from %0 to %2. + * + * If the GPIO cannot be translated or there is an error, negative errno is + * returned. + * + * Note: if the GPIO resource has multiple entries in the pin list, this + * function only returns the first. + */ +int acpi_get_gpio_by_index(struct device *dev, int index, + struct acpi_gpio_info *info) +{ + struct acpi_gpio_lookup lookup; + struct list_head resource_list; + struct acpi_device *adev; + acpi_handle handle; + int ret; + + if (!dev) + return -EINVAL; + + handle = ACPI_HANDLE(dev); + if (!handle || acpi_bus_get_device(handle, &adev)) + return -ENODEV; + + memset(&lookup, 0, sizeof(lookup)); + lookup.index = index; + lookup.gpio = -ENODEV; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(adev, &resource_list, acpi_find_gpio, + &lookup); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&resource_list); + + if (lookup.gpio >= 0 && info) + *info = lookup.info; + + return lookup.gpio; +} +EXPORT_SYMBOL_GPL(acpi_get_gpio_by_index); /** * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts. diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h index 213135f44333..4c120a1e0ca3 100644 --- a/include/linux/acpi_gpio.h +++ b/include/linux/acpi_gpio.h @@ -1,12 +1,23 @@ #ifndef _LINUX_ACPI_GPIO_H_ #define _LINUX_ACPI_GPIO_H_ +#include #include #include +/** + * struct acpi_gpio_info - ACPI GPIO specific information + * @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo + */ +struct acpi_gpio_info { + bool gpioint; +}; + #ifdef CONFIG_GPIO_ACPI int acpi_get_gpio(char *path, int pin); +int acpi_get_gpio_by_index(struct device *dev, int index, + struct acpi_gpio_info *info); void acpi_gpiochip_request_interrupts(struct gpio_chip *chip); void acpi_gpiochip_free_interrupts(struct gpio_chip *chip); @@ -17,6 +28,12 @@ static inline int acpi_get_gpio(char *path, int pin) return -ENODEV; } +static inline int acpi_get_gpio_by_index(struct device *dev, int index, + struct acpi_gpio_info *info) +{ + return -ENODEV; +} + static inline void acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { } static inline void acpi_gpiochip_free_interrupts(struct gpio_chip *chip) { } -- cgit v1.2.3-58-ga151 From ddb27f3bf771b53e0e7aa93d0186ea5c03381e23 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 17 Apr 2013 14:36:50 +0200 Subject: gpio: grgpio: Add device driver for GRGPIO cores This driver supports GRGPIO gpio cores available in the GRLIB VHDL IP core library from Aeroflex Gaisler. Signed-off-by: Andreas Larsson Signed-off-by: Linus Walleij --- .../devicetree/bindings/gpio/gpio-grgpio.txt | 21 +++ drivers/gpio/Kconfig | 9 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-grgpio.c | 149 +++++++++++++++++++++ 4 files changed, 180 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-grgpio.txt create mode 100644 drivers/gpio/gpio-grgpio.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt new file mode 100644 index 000000000000..1ec46fdf11d0 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt @@ -0,0 +1,21 @@ +Aeroflex Gaisler GRGPIO General Purpose I/O cores. + +The GRGPIO GPIO core is available in the GRLIB VHDL IP core library. + +Note: In the ordinary environment for the GRGPIO core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_GPIO" or "01_01a" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- nbits : The number of gpio lines. If not present driver assumes 32 lines. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 704d01d67522..345c6672709c 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -309,6 +309,15 @@ config GPIO_LYNXPOINT driver for GPIO functionality on Intel Lynxpoint PCH chipset Requires ACPI device enumeration code to set up a platform device. +config GPIO_GRGPIO + tristate "Aeroflex Gaisler GRGPIO support" + depends on OF + select GPIO_GENERIC + select IRQ_DOMAIN + help + Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB + VHDL IP core library. + comment "I2C GPIO expanders:" config GPIO_ARIZONA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 22e07bc9fcb5..3e6be5134122 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_EM) += gpio-em.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o +obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o obj-$(CONFIG_GPIO_ICH) += gpio-ich.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c new file mode 100644 index 000000000000..466a1c757fae --- /dev/null +++ b/drivers/gpio/gpio-grgpio.c @@ -0,0 +1,149 @@ +/* + * Driver for Aeroflex Gaisler GRGPIO General Purpose I/O cores. + * + * 2013 (c) Aeroflex Gaisler AB + * + * This driver supports the GRGPIO GPIO core available in the GRLIB VHDL + * IP core library. + * + * Full documentation of the GRGPIO core can be found here: + * http://www.gaisler.com/products/grlib/grip.pdf + * + * See "Documentation/devicetree/bindings/gpio/gpio-grgpio.txt" for + * information on open firmware properties. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Contributors: Andreas Larsson + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GRGPIO_MAX_NGPIO 32 + +#define GRGPIO_DATA 0x00 +#define GRGPIO_OUTPUT 0x04 +#define GRGPIO_DIR 0x08 +#define GRGPIO_IMASK 0x0c +#define GRGPIO_IPOL 0x10 +#define GRGPIO_IEDGE 0x14 +#define GRGPIO_BYPASS 0x18 +#define GRGPIO_IMAP_BASE 0x20 + +struct grgpio_priv { + struct bgpio_chip bgc; + void __iomem *regs; + struct device *dev; +}; + +static inline struct grgpio_priv *grgpio_gc_to_priv(struct gpio_chip *gc) +{ + struct bgpio_chip *bgc = to_bgpio_chip(gc); + + return container_of(bgc, struct grgpio_priv, bgc); +} + +static int grgpio_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + void __iomem *regs; + struct gpio_chip *gc; + struct bgpio_chip *bgc; + struct grgpio_priv *priv; + struct resource *res; + int err; + u32 prop; + + priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(&ofdev->dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + bgc = &priv->bgc; + err = bgpio_init(bgc, &ofdev->dev, 4, regs + GRGPIO_DATA, + regs + GRGPIO_OUTPUT, NULL, regs + GRGPIO_DIR, NULL, + BGPIOF_BIG_ENDIAN_BYTE_ORDER); + if (err) { + dev_err(&ofdev->dev, "bgpio_init() failed\n"); + return err; + } + + priv->regs = regs; + priv->dev = &ofdev->dev; + + gc = &bgc->gc; + gc->of_node = np; + gc->owner = THIS_MODULE; + gc->label = np->full_name; + gc->base = -1; + + err = of_property_read_u32(np, "nbits", &prop); + if (err || prop <= 0 || prop > GRGPIO_MAX_NGPIO) { + gc->ngpio = GRGPIO_MAX_NGPIO; + dev_dbg(&ofdev->dev, + "No or invalid nbits property: assume %d\n", gc->ngpio); + } else { + gc->ngpio = prop; + } + + platform_set_drvdata(ofdev, priv); + + err = gpiochip_add(gc); + if (err) { + dev_err(&ofdev->dev, "Could not add gpiochip\n"); + return err; + } + + dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d\n", + priv->regs, gc->base, gc->ngpio); + + return 0; +} + +static int grgpio_remove(struct platform_device *ofdev) +{ + struct grgpio_priv *priv = platform_get_drvdata(ofdev); + + return gpiochip_remove(&priv->bgc.gc); +} + +static struct of_device_id grgpio_match[] = { + {.name = "GAISLER_GPIO"}, + {.name = "01_01a"}, + {}, +}; + +MODULE_DEVICE_TABLE(of, grgpio_match); + +static struct platform_driver grgpio_driver = { + .driver = { + .name = "grgpio", + .owner = THIS_MODULE, + .of_match_table = grgpio_match, + }, + .probe = grgpio_probe, + .remove = grgpio_remove, +}; +module_platform_driver(grgpio_driver); + +MODULE_AUTHOR("Aeroflex Gaisler AB."); +MODULE_DESCRIPTION("Driver for Aeroflex Gaisler GRGPIO"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-58-ga151 From 08ffb2229fafc2c3a696b325a74bf4198d6b91d7 Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 17 Apr 2013 14:36:51 +0200 Subject: gpio: grgpio: Add irq support The drivers sets up an irq domain and hands out unique irqs to irq capable gpio lines regardless of how underlying irq maps to gpio lines. Any gpio line can map to any one or none of the irqs of the core, independently of each other. Signed-off-by: Andreas Larsson Signed-off-by: Linus Walleij --- .../devicetree/bindings/gpio/gpio-grgpio.txt | 5 + drivers/gpio/gpio-grgpio.c | 362 ++++++++++++++++++++- 2 files changed, 364 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt index 1ec46fdf11d0..e466598105fc 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-grgpio.txt @@ -17,5 +17,10 @@ Optional properties: - nbits : The number of gpio lines. If not present driver assumes 32 lines. +- irqmap : An array with an index for each gpio line. An index is either a valid + index into the interrupts property array, or 0xffffffff that indicates + no irq for that line. Driver provides no interrupt support if not + present. + For further information look in the documentation for the GLIB IP core library: http://www.gaisler.com/products/grlib/grip.pdf diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c index 466a1c757fae..8e08b8647655 100644 --- a/drivers/gpio/gpio-grgpio.c +++ b/drivers/gpio/gpio-grgpio.c @@ -32,6 +32,9 @@ #include #include #include +#include +#include +#include #define GRGPIO_MAX_NGPIO 32 @@ -44,10 +47,49 @@ #define GRGPIO_BYPASS 0x18 #define GRGPIO_IMAP_BASE 0x20 +/* Structure for an irq of the core - called an underlying irq */ +struct grgpio_uirq { + u8 refcnt; /* Reference counter to manage requesting/freeing of uirq */ + u8 uirq; /* Underlying irq of the gpio driver */ +}; + +/* + * Structure for an irq of a gpio line handed out by this driver. The index is + * used to map to the corresponding underlying irq. + */ +struct grgpio_lirq { + s8 index; /* Index into struct grgpio_priv's uirqs, or -1 */ + u8 irq; /* irq for the gpio line */ +}; + struct grgpio_priv { struct bgpio_chip bgc; void __iomem *regs; struct device *dev; + + u32 imask; /* irq mask shadow register */ + + /* + * The grgpio core can have multiple "underlying" irqs. The gpio lines + * can be mapped to any one or none of these underlying irqs + * independently of each other. This driver sets up an irq domain and + * hands out separate irqs to each gpio line + */ + struct irq_domain *domain; + + /* + * This array contains information on each underlying irq, each + * irq of the grgpio core itself. + */ + struct grgpio_uirq uirqs[GRGPIO_MAX_NGPIO]; + + /* + * This array contains information for each gpio line on the irqs + * obtains from this driver. An index value of -1 for a certain gpio + * line indicates that the line has no irq. Otherwise the index connects + * the irq to the underlying irq by pointing into the uirqs array. + */ + struct grgpio_lirq lirqs[GRGPIO_MAX_NGPIO]; }; static inline struct grgpio_priv *grgpio_gc_to_priv(struct gpio_chip *gc) @@ -57,6 +99,246 @@ static inline struct grgpio_priv *grgpio_gc_to_priv(struct gpio_chip *gc) return container_of(bgc, struct grgpio_priv, bgc); } +static void grgpio_set_imask(struct grgpio_priv *priv, unsigned int offset, + int val) +{ + struct bgpio_chip *bgc = &priv->bgc; + unsigned long mask = bgc->pin2mask(bgc, offset); + unsigned long flags; + + spin_lock_irqsave(&bgc->lock, flags); + + if (val) + priv->imask |= mask; + else + priv->imask &= ~mask; + bgc->write_reg(priv->regs + GRGPIO_IMASK, priv->imask); + + spin_unlock_irqrestore(&bgc->lock, flags); +} + +static int grgpio_to_irq(struct gpio_chip *gc, unsigned offset) +{ + struct grgpio_priv *priv = grgpio_gc_to_priv(gc); + + if (offset > gc->ngpio) + return -ENXIO; + + if (priv->lirqs[offset].index < 0) + return -ENXIO; + + return irq_create_mapping(priv->domain, offset); +} + +/* -------------------- IRQ chip functions -------------------- */ + +static int grgpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + unsigned long flags; + u32 mask = BIT(d->hwirq); + u32 ipol; + u32 iedge; + u32 pol; + u32 edge; + + switch (type) { + case IRQ_TYPE_LEVEL_LOW: + pol = 0; + edge = 0; + break; + case IRQ_TYPE_LEVEL_HIGH: + pol = mask; + edge = 0; + break; + case IRQ_TYPE_EDGE_FALLING: + pol = 0; + edge = mask; + break; + case IRQ_TYPE_EDGE_RISING: + pol = mask; + edge = mask; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&priv->bgc.lock, flags); + + ipol = priv->bgc.read_reg(priv->regs + GRGPIO_IPOL) & ~mask; + iedge = priv->bgc.read_reg(priv->regs + GRGPIO_IEDGE) & ~mask; + + priv->bgc.write_reg(priv->regs + GRGPIO_IPOL, ipol | pol); + priv->bgc.write_reg(priv->regs + GRGPIO_IEDGE, iedge | edge); + + spin_unlock_irqrestore(&priv->bgc.lock, flags); + + return 0; +} + +static void grgpio_irq_mask(struct irq_data *d) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + int offset = d->hwirq; + + grgpio_set_imask(priv, offset, 0); +} + +static void grgpio_irq_unmask(struct irq_data *d) +{ + struct grgpio_priv *priv = irq_data_get_irq_chip_data(d); + int offset = d->hwirq; + + grgpio_set_imask(priv, offset, 1); +} + +static struct irq_chip grgpio_irq_chip = { + .name = "grgpio", + .irq_mask = grgpio_irq_mask, + .irq_unmask = grgpio_irq_unmask, + .irq_set_type = grgpio_irq_set_type, +}; + +static irqreturn_t grgpio_irq_handler(int irq, void *dev) +{ + struct grgpio_priv *priv = dev; + int ngpio = priv->bgc.gc.ngpio; + unsigned long flags; + int i; + int match = 0; + + spin_lock_irqsave(&priv->bgc.lock, flags); + + /* + * For each gpio line, call its interrupt handler if it its underlying + * irq matches the current irq that is handled. + */ + for (i = 0; i < ngpio; i++) { + struct grgpio_lirq *lirq = &priv->lirqs[i]; + + if (priv->imask & BIT(i) && lirq->index >= 0 && + priv->uirqs[lirq->index].uirq == irq) { + generic_handle_irq(lirq->irq); + match = 1; + } + } + + spin_unlock_irqrestore(&priv->bgc.lock, flags); + + if (!match) + dev_warn(priv->dev, "No gpio line matched irq %d\n", irq); + + return IRQ_HANDLED; +} + +/* + * This function will be called as a consequence of the call to + * irq_create_mapping in grgpio_to_irq + */ +int grgpio_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct grgpio_priv *priv = d->host_data; + struct grgpio_lirq *lirq; + struct grgpio_uirq *uirq; + unsigned long flags; + int offset = hwirq; + int ret = 0; + + if (!priv) + return -EINVAL; + + lirq = &priv->lirqs[offset]; + if (lirq->index < 0) + return -EINVAL; + + dev_dbg(priv->dev, "Mapping irq %d for gpio line %d\n", + irq, offset); + + spin_lock_irqsave(&priv->bgc.lock, flags); + + /* Request underlying irq if not already requested */ + lirq->irq = irq; + uirq = &priv->uirqs[lirq->index]; + if (uirq->refcnt == 0) { + ret = request_irq(uirq->uirq, grgpio_irq_handler, 0, + dev_name(priv->dev), priv); + if (ret) { + dev_err(priv->dev, + "Could not request underlying irq %d\n", + uirq->uirq); + + spin_unlock_irqrestore(&priv->bgc.lock, flags); + + return ret; + } + } + uirq->refcnt++; + + spin_unlock_irqrestore(&priv->bgc.lock, flags); + + /* Setup irq */ + irq_set_chip_data(irq, priv); + irq_set_chip_and_handler(irq, &grgpio_irq_chip, + handle_simple_irq); + irq_clear_status_flags(irq, IRQ_NOREQUEST); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + irq_set_noprobe(irq); +#endif + + return ret; +} + +void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + struct grgpio_priv *priv = d->host_data; + int index; + struct grgpio_lirq *lirq; + struct grgpio_uirq *uirq; + unsigned long flags; + int ngpio = priv->bgc.gc.ngpio; + int i; + +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); + + spin_lock_irqsave(&priv->bgc.lock, flags); + + /* Free underlying irq if last user unmapped */ + index = -1; + for (i = 0; i < ngpio; i++) { + lirq = &priv->lirqs[i]; + if (lirq->irq == irq) { + grgpio_set_imask(priv, i, 0); + lirq->irq = 0; + index = lirq->index; + break; + } + } + WARN_ON(index < 0); + + if (index >= 0) { + uirq = &priv->uirqs[lirq->index]; + uirq->refcnt--; + if (uirq->refcnt == 0) + free_irq(uirq->uirq, priv); + } + + spin_unlock_irqrestore(&priv->bgc.lock, flags); +} + +static struct irq_domain_ops grgpio_irq_domain_ops = { + .map = grgpio_irq_map, + .unmap = grgpio_irq_unmap, +}; + +/* ------------------------------------------------------------ */ + static int grgpio_probe(struct platform_device *ofdev) { struct device_node *np = ofdev->dev.of_node; @@ -67,6 +349,9 @@ static int grgpio_probe(struct platform_device *ofdev) struct resource *res; int err; u32 prop; + s32 *irqmap; + int size; + int i; priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -87,11 +372,13 @@ static int grgpio_probe(struct platform_device *ofdev) } priv->regs = regs; + priv->imask = bgc->read_reg(regs + GRGPIO_IMASK); priv->dev = &ofdev->dev; gc = &bgc->gc; gc->of_node = np; gc->owner = THIS_MODULE; + gc->to_irq = grgpio_to_irq; gc->label = np->full_name; gc->base = -1; @@ -104,6 +391,51 @@ static int grgpio_probe(struct platform_device *ofdev) gc->ngpio = prop; } + /* + * The irqmap contains the index values indicating which underlying irq, + * if anyone, is connected to that line + */ + irqmap = (s32 *)of_get_property(np, "irqmap", &size); + if (irqmap) { + if (size < gc->ngpio) { + dev_err(&ofdev->dev, + "irqmap shorter than ngpio (%d < %d)\n", + size, gc->ngpio); + return -EINVAL; + } + + priv->domain = irq_domain_add_linear(np, gc->ngpio, + &grgpio_irq_domain_ops, + priv); + if (!priv->domain) { + dev_err(&ofdev->dev, "Could not add irq domain\n"); + return -EINVAL; + } + + for (i = 0; i < gc->ngpio; i++) { + struct grgpio_lirq *lirq; + int ret; + + lirq = &priv->lirqs[i]; + lirq->index = irqmap[i]; + + if (lirq->index < 0) + continue; + + ret = platform_get_irq(ofdev, lirq->index); + if (ret <= 0) { + /* + * Continue without irq functionality for that + * gpio line + */ + dev_err(priv->dev, + "Failed to get irq for offset %d\n", i); + continue; + } + priv->uirqs[lirq->index].uirq = ret; + } + } + platform_set_drvdata(ofdev, priv); err = gpiochip_add(gc); @@ -112,8 +444,8 @@ static int grgpio_probe(struct platform_device *ofdev) return err; } - dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d\n", - priv->regs, gc->base, gc->ngpio); + dev_info(&ofdev->dev, "regs=0x%p, base=%d, ngpio=%d, irqs=%s\n", + priv->regs, gc->base, gc->ngpio, priv->domain ? "on" : "off"); return 0; } @@ -121,8 +453,32 @@ static int grgpio_probe(struct platform_device *ofdev) static int grgpio_remove(struct platform_device *ofdev) { struct grgpio_priv *priv = platform_get_drvdata(ofdev); + unsigned long flags; + int i; + int ret = 0; + + spin_lock_irqsave(&priv->bgc.lock, flags); + + if (priv->domain) { + for (i = 0; i < GRGPIO_MAX_NGPIO; i++) { + if (priv->uirqs[i].refcnt != 0) { + ret = -EBUSY; + goto out; + } + } + } + + ret = gpiochip_remove(&priv->bgc.gc); + if (ret) + goto out; + + if (priv->domain) + irq_domain_remove(priv->domain); + +out: + spin_unlock_irqrestore(&priv->bgc.lock, flags); - return gpiochip_remove(&priv->bgc.gc); + return ret; } static struct of_device_id grgpio_match[] = { -- cgit v1.2.3-58-ga151