From 98f2a97f207a776603173ee96327d977e592579d Mon Sep 17 00:00:00 2001 From: Cedric Bregardis Date: Wed, 20 Feb 2008 12:05:13 +0100 Subject: [ALSA] Emagic Audiowerk 2 ALSA driver. Signed-off-by: Cedric Bregardis Signed-off-by: Jean-Christian Hassler Signed-off-by: Takashi Iwai --- sound/pci/Kconfig | 15 + sound/pci/Makefile | 1 + sound/pci/aw2/Makefile | 3 + sound/pci/aw2/aw2-alsa.c | 787 ++++++++++++++++++++++++++++++++++++++++++++ sound/pci/aw2/aw2-saa7146.c | 464 ++++++++++++++++++++++++++ sound/pci/aw2/aw2-saa7146.h | 105 ++++++ sound/pci/aw2/aw2-tsl.h | 116 +++++++ sound/pci/aw2/saa7146.h | 168 ++++++++++ 8 files changed, 1659 insertions(+) create mode 100644 sound/pci/aw2/Makefile create mode 100644 sound/pci/aw2/aw2-alsa.c create mode 100644 sound/pci/aw2/aw2-saa7146.c create mode 100644 sound/pci/aw2/aw2-saa7146.h create mode 100644 sound/pci/aw2/aw2-tsl.h create mode 100644 sound/pci/aw2/saa7146.h diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index b05435cfee1e..868183bef243 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -122,6 +122,21 @@ config SND_AU8830 To compile this driver as a module, choose M here: the module will be called snd-au8830. +config SND_AW2 + tristate "Emagic Audiowerk 2" + depends on SND + help + Say Y here to include support for Emagic Audiowerk 2 soundcards. + + Supported features: Analog and SPDIF output. Analog or SPDIF input. + Note: Switch between analog and digital input does not always work. + It can produce continuous noise. The workaround is to switch again + (and again) between digital and analog input until it works. + + To compile this driver as a module, choose M here: the module + will be called snd-aw2. + + config SND_AZT3328 tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)" depends on SND && EXPERIMENTAL diff --git a/sound/pci/Makefile b/sound/pci/Makefile index 2d42fd28f4e7..85ef14bc8056 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -58,6 +58,7 @@ obj-$(CONFIG_SND) += \ ac97/ \ ali5451/ \ au88x0/ \ + aw2/ \ ca0106/ \ cs46xx/ \ cs5535audio/ \ diff --git a/sound/pci/aw2/Makefile b/sound/pci/aw2/Makefile new file mode 100644 index 000000000000..842335d3b735 --- /dev/null +++ b/sound/pci/aw2/Makefile @@ -0,0 +1,3 @@ +snd-aw2-objs := aw2-alsa.o aw2-saa7146.o + +obj-$(CONFIG_SND_AW2) += snd-aw2.o diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c new file mode 100644 index 000000000000..74af639b9132 --- /dev/null +++ b/sound/pci/aw2/aw2-alsa.c @@ -0,0 +1,787 @@ +/***************************************************************************** + * + * Copyright (C) 2008 Cedric Bregardis and + * Jean-Christian Hassler + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "saa7146.h" +#include "aw2-saa7146.h" + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cedric Bregardis , " + "Jean-Christian Hassler "); +MODULE_DESCRIPTION("Emagic Audiowerk 2 sound driver"); +MODULE_LICENSE("GPL"); + +/********************************* + * DEFINES + ********************************/ +#define PCI_VENDOR_ID_SAA7146 0x1131 +#define PCI_DEVICE_ID_SAA7146 0x7146 + +#define CTL_ROUTE_ANALOG 0 +#define CTL_ROUTE_DIGITAL 1 + +/********************************* + * TYPEDEFS + ********************************/ + /* hardware definition */ +static struct snd_pcm_hardware snd_aw2_playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .channels_min = 2, + .channels_max = 4, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, +}; + +static struct snd_pcm_hardware snd_aw2_capture_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP_VALID), + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 32768, + .period_bytes_min = 4096, + .period_bytes_max = 32768, + .periods_min = 1, + .periods_max = 1024, +}; + +struct aw2_pcm_device { + struct snd_pcm *pcm; + unsigned int stream_number; + struct aw2 *chip; +}; + +struct aw2 { + struct snd_aw2_saa7146 saa7146; + + struct pci_dev *pci; + int irq; + spinlock_t reg_lock; + struct mutex mtx; + + unsigned long iobase_phys; + void __iomem *iobase_virt; + + struct snd_card *card; + + struct aw2_pcm_device device_playback[NB_STREAM_PLAYBACK]; + struct aw2_pcm_device device_capture[NB_STREAM_CAPTURE]; +}; + +/********************************* + * FUNCTION DECLARATIONS + ********************************/ +static int __init alsa_card_aw2_init(void); +static void __exit alsa_card_aw2_exit(void); +static int snd_aw2_dev_free(struct snd_device *device); +static int __devinit snd_aw2_create(struct snd_card *card, + struct pci_dev *pci, struct aw2 **rchip); +static int __devinit snd_aw2_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id); +static void __devexit snd_aw2_remove(struct pci_dev *pci); +static int snd_aw2_pcm_playback_open(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_playback_close(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_capture_open(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_capture_close(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params); +static int snd_aw2_pcm_hw_free(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_prepare_playback(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_prepare_capture(struct snd_pcm_substream *substream); +static int snd_aw2_pcm_trigger_playback(struct snd_pcm_substream *substream, + int cmd); +static int snd_aw2_pcm_trigger_capture(struct snd_pcm_substream *substream, + int cmd); +static snd_pcm_uframes_t snd_aw2_pcm_pointer_playback(struct snd_pcm_substream + *substream); +static snd_pcm_uframes_t snd_aw2_pcm_pointer_capture(struct snd_pcm_substream + *substream); +static int __devinit snd_aw2_new_pcm(struct aw2 *chip); + +static int snd_aw2_control_switch_capture_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +static int snd_aw2_control_switch_capture_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol); +static int snd_aw2_control_switch_capture_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol); + +/********************************* + * VARIABLES + ********************************/ +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; +static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +static struct pci_device_id snd_aw2_ids[] = { + {PCI_VENDOR_ID_SAA7146, PCI_DEVICE_ID_SAA7146, PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, snd_aw2_ids); + +/* pci_driver definition */ +static struct pci_driver driver = { + .name = "Emagic Audiowerk 2", + .id_table = snd_aw2_ids, + .probe = snd_aw2_probe, + .remove = __devexit_p(snd_aw2_remove), +}; + +/* operators for playback PCM alsa interface */ +static struct snd_pcm_ops snd_aw2_playback_ops = { + .open = snd_aw2_pcm_playback_open, + .close = snd_aw2_pcm_playback_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_aw2_pcm_hw_params, + .hw_free = snd_aw2_pcm_hw_free, + .prepare = snd_aw2_pcm_prepare_playback, + .trigger = snd_aw2_pcm_trigger_playback, + .pointer = snd_aw2_pcm_pointer_playback, +}; + +/* operators for capture PCM alsa interface */ +static struct snd_pcm_ops snd_aw2_capture_ops = { + .open = snd_aw2_pcm_capture_open, + .close = snd_aw2_pcm_capture_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_aw2_pcm_hw_params, + .hw_free = snd_aw2_pcm_hw_free, + .prepare = snd_aw2_pcm_prepare_capture, + .trigger = snd_aw2_pcm_trigger_capture, + .pointer = snd_aw2_pcm_pointer_capture, +}; + +static struct snd_kcontrol_new aw2_control __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .private_value = 0xffff, + .info = snd_aw2_control_switch_capture_info, + .get = snd_aw2_control_switch_capture_get, + .put = snd_aw2_control_switch_capture_put +}; + +/********************************* + * FUNCTION IMPLEMENTATIONS + ********************************/ + +/* initialization of the module */ +static int __init alsa_card_aw2_init(void) +{ + snd_printdd(KERN_DEBUG "aw2: Load aw2 module\n"); + return pci_register_driver(&driver); +} + +/* clean up the module */ +static void __exit alsa_card_aw2_exit(void) +{ + snd_printdd(KERN_DEBUG "aw2: Unload aw2 module\n"); + pci_unregister_driver(&driver); +} + +module_init(alsa_card_aw2_init); +module_exit(alsa_card_aw2_exit); + +/* component-destructor */ +static int snd_aw2_dev_free(struct snd_device *device) +{ + struct aw2 *chip = device->device_data; + + /* Free hardware */ + snd_aw2_saa7146_free(&chip->saa7146); + + /* release the irq */ + if (chip->irq >= 0) + free_irq(chip->irq, (void *)chip); + /* release the i/o ports & memory */ + if (chip->iobase_virt) + iounmap(chip->iobase_virt); + + pci_release_regions(chip->pci); + /* disable the PCI entry */ + pci_disable_device(chip->pci); + /* release the data */ + kfree(chip); + + return 0; +} + +/* chip-specific constructor */ +static int __devinit snd_aw2_create(struct snd_card *card, + struct pci_dev *pci, struct aw2 **rchip) +{ + struct aw2 *chip; + int err; + static struct snd_device_ops ops = { + .dev_free = snd_aw2_dev_free, + }; + + *rchip = NULL; + + /* initialize the PCI entry */ + err = pci_enable_device(pci); + if (err < 0) + return err; + pci_set_master(pci); + + /* check PCI availability (32bit DMA) */ + if ((pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0) || + (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0)) { + printk(KERN_ERR "aw2: Impossible to set 32bit mask DMA\n"); + pci_disable_device(pci); + return -ENXIO; + } + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (chip == NULL) { + pci_disable_device(pci); + return -ENOMEM; + } + + /* initialize the stuff */ + chip->card = card; + chip->pci = pci; + chip->irq = -1; + + /* (1) PCI resource allocation */ + err = pci_request_regions(pci, "Audiowerk2"); + if (err < 0) { + pci_disable_device(pci); + kfree(chip); + return err; + } + chip->iobase_phys = pci_resource_start(pci, 0); + chip->iobase_virt = + ioremap_nocache(chip->iobase_phys, + pci_resource_len(pci, 0)); + + if (chip->iobase_virt == NULL) { + printk(KERN_ERR "aw2: unable to remap memory region"); + pci_release_regions(pci); + pci_disable_device(pci); + kfree(chip); + return -ENOMEM; + } + + + if (request_irq(pci->irq, snd_aw2_saa7146_interrupt, + IRQF_SHARED, "Audiowerk2", chip)) { + printk(KERN_ERR "aw2: Cannot grab irq %d\n", pci->irq); + + iounmap(chip->iobase_virt); + pci_release_regions(chip->pci); + pci_disable_device(chip->pci); + kfree(chip); + return -EBUSY; + } + chip->irq = pci->irq; + + /* (2) initialization of the chip hardware */ + snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt); + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) { + free_irq(chip->irq, (void *)chip); + iounmap(chip->iobase_virt); + pci_release_regions(chip->pci); + pci_disable_device(chip->pci); + kfree(chip); + return err; + } + + snd_card_set_dev(card, &pci->dev); + *rchip = chip; + + printk(KERN_INFO + "Audiowerk 2 sound card (saa7146 chipset) detected and " + "managed\n"); + return 0; +} + +/* constructor */ +static int __devinit snd_aw2_probe(struct pci_dev *pci, + const struct pci_device_id *pci_id) +{ + static int dev; + struct snd_card *card; + struct aw2 *chip; + int err; + + /* (1) Continue if device is not enabled, else inc dev */ + if (dev >= SNDRV_CARDS) + return -ENODEV; + if (!enable[dev]) { + dev++; + return -ENOENT; + } + + /* (2) Create card instance */ + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); + if (card == NULL) + return -ENOMEM; + + /* (3) Create main component */ + err = snd_aw2_create(card, pci, &chip); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* initialize mutex */ + mutex_init(&chip->mtx); + /* init spinlock */ + spin_lock_init(&chip->reg_lock); + /* (4) Define driver ID and name string */ + strcpy(card->driver, "aw2"); + strcpy(card->shortname, "Audiowerk2"); + + sprintf(card->longname, "%s with SAA7146 irq %i", + card->shortname, chip->irq); + + /* (5) Create other components */ + snd_aw2_new_pcm(chip); + + /* (6) Register card instance */ + err = snd_card_register(card); + if (err < 0) { + snd_card_free(card); + return err; + } + + /* (7) Set PCI driver data */ + pci_set_drvdata(pci, card); + + dev++; + return 0; +} + +/* destructor */ +static void __devexit snd_aw2_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +/* open callback */ +static int snd_aw2_pcm_playback_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + snd_printdd(KERN_DEBUG "aw2: Playback_open \n"); + runtime->hw = snd_aw2_playback_hw; + return 0; +} + +/* close callback */ +static int snd_aw2_pcm_playback_close(struct snd_pcm_substream *substream) +{ + return 0; + +} + +static int snd_aw2_pcm_capture_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + snd_printdd(KERN_DEBUG "aw2: Capture_open \n"); + runtime->hw = snd_aw2_capture_hw; + return 0; +} + +/* close callback */ +static int snd_aw2_pcm_capture_close(struct snd_pcm_substream *substream) +{ + /* TODO: something to do ? */ + return 0; +} + + /* hw_params callback */ +static int snd_aw2_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + return snd_pcm_lib_malloc_pages(substream, + params_buffer_bytes(hw_params)); +} + +/* hw_free callback */ +static int snd_aw2_pcm_hw_free(struct snd_pcm_substream *substream) +{ + return snd_pcm_lib_free_pages(substream); +} + +/* prepare callback for playback */ +static int snd_aw2_pcm_prepare_playback(struct snd_pcm_substream *substream) +{ + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long period_size, buffer_size; + + mutex_lock(&chip->mtx); + + period_size = snd_pcm_lib_period_bytes(substream); + buffer_size = snd_pcm_lib_buffer_bytes(substream); + + snd_aw2_saa7146_pcm_init_playback(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_addr, period_size, + buffer_size); + + /* Define Interrupt callback */ + snd_aw2_saa7146_define_it_playback_callback(pcm_device->stream_number, + (snd_aw2_saa7146_it_cb) + snd_pcm_period_elapsed, + (void *)substream); + + mutex_unlock(&chip->mtx); + + return 0; +} + +/* prepare callback for capture */ +static int snd_aw2_pcm_prepare_capture(struct snd_pcm_substream *substream) +{ + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned long period_size, buffer_size; + + mutex_lock(&chip->mtx); + + period_size = snd_pcm_lib_period_bytes(substream); + buffer_size = snd_pcm_lib_buffer_bytes(substream); + + snd_aw2_saa7146_pcm_init_capture(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_addr, period_size, + buffer_size); + + /* Define Interrupt callback */ + snd_aw2_saa7146_define_it_capture_callback(pcm_device->stream_number, + (snd_aw2_saa7146_it_cb) + snd_pcm_period_elapsed, + (void *)substream); + + mutex_unlock(&chip->mtx); + + return 0; +} + +/* playback trigger callback */ +static int snd_aw2_pcm_trigger_playback(struct snd_pcm_substream *substream, + int cmd) +{ + int status = 0; + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + spin_lock(&chip->reg_lock); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + snd_aw2_saa7146_pcm_trigger_start_playback(&chip->saa7146, + pcm_device-> + stream_number); + break; + case SNDRV_PCM_TRIGGER_STOP: + snd_aw2_saa7146_pcm_trigger_stop_playback(&chip->saa7146, + pcm_device-> + stream_number); + break; + default: + status = -EINVAL; + } + spin_unlock(&chip->reg_lock); + return status; +} + +/* capture trigger callback */ +static int snd_aw2_pcm_trigger_capture(struct snd_pcm_substream *substream, + int cmd) +{ + int status = 0; + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + spin_lock(&chip->reg_lock); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + snd_aw2_saa7146_pcm_trigger_start_capture(&chip->saa7146, + pcm_device-> + stream_number); + break; + case SNDRV_PCM_TRIGGER_STOP: + snd_aw2_saa7146_pcm_trigger_stop_capture(&chip->saa7146, + pcm_device-> + stream_number); + break; + default: + status = -EINVAL; + } + spin_unlock(&chip->reg_lock); + return status; +} + +/* playback pointer callback */ +static snd_pcm_uframes_t snd_aw2_pcm_pointer_playback(struct snd_pcm_substream + *substream) +{ + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + unsigned int current_ptr; + + /* get the current hardware pointer */ + struct snd_pcm_runtime *runtime = substream->runtime; + current_ptr = + snd_aw2_saa7146_get_hw_ptr_playback(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_area, + runtime->buffer_size); + + return bytes_to_frames(substream->runtime, current_ptr); +} + +/* capture pointer callback */ +static snd_pcm_uframes_t snd_aw2_pcm_pointer_capture(struct snd_pcm_substream + *substream) +{ + struct aw2_pcm_device *pcm_device = snd_pcm_substream_chip(substream); + struct aw2 *chip = pcm_device->chip; + unsigned int current_ptr; + + /* get the current hardware pointer */ + struct snd_pcm_runtime *runtime = substream->runtime; + current_ptr = + snd_aw2_saa7146_get_hw_ptr_capture(&chip->saa7146, + pcm_device->stream_number, + runtime->dma_area, + runtime->buffer_size); + + return bytes_to_frames(substream->runtime, current_ptr); +} + +/* create a pcm device */ +static int __devinit snd_aw2_new_pcm(struct aw2 *chip) +{ + struct snd_pcm *pcm_playback_ana; + struct snd_pcm *pcm_playback_num; + struct snd_pcm *pcm_capture; + struct aw2_pcm_device *pcm_device; + int err = 0; + + /* Create new Alsa PCM device */ + + err = snd_pcm_new(chip->card, "Audiowerk2 analog playback", 0, 1, 0, + &pcm_playback_ana); + if (err < 0) { + printk(KERN_ERR "aw2: snd_pcm_new error (0x%X)\n", err); + return err; + } + + /* Creation ok */ + pcm_device = &chip->device_playback[NUM_STREAM_PLAYBACK_ANA]; + + /* Set PCM device name */ + strcpy(pcm_playback_ana->name, "Analog playback"); + /* Associate private data to PCM device */ + pcm_playback_ana->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_playback_ana, SNDRV_PCM_STREAM_PLAYBACK, + &snd_aw2_playback_ops); + /* store PCM device */ + pcm_device->pcm = pcm_playback_ana; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_PLAYBACK_ANA; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = snd_pcm_lib_preallocate_pages_for_all(pcm_playback_ana, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->pci), + 64 * 1024, 64 * 1024); + if (err) + printk(KERN_ERR "aw2: snd_pcm_lib_preallocate_pages_for_all " + "error (0x%X)\n", err); + + err = snd_pcm_new(chip->card, "Audiowerk2 digital playback", 1, 1, 0, + &pcm_playback_num); + + if (err < 0) { + printk(KERN_ERR "aw2: snd_pcm_new error (0x%X)\n", err); + return err; + } + /* Creation ok */ + pcm_device = &chip->device_playback[NUM_STREAM_PLAYBACK_DIG]; + + /* Set PCM device name */ + strcpy(pcm_playback_num->name, "Digital playback"); + /* Associate private data to PCM device */ + pcm_playback_num->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_playback_num, SNDRV_PCM_STREAM_PLAYBACK, + &snd_aw2_playback_ops); + /* store PCM device */ + pcm_device->pcm = pcm_playback_num; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_PLAYBACK_DIG; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = snd_pcm_lib_preallocate_pages_for_all(pcm_playback_num, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->pci), + 64 * 1024, 64 * 1024); + if (err) + printk(KERN_ERR + "aw2: snd_pcm_lib_preallocate_pages_for_all error " + "(0x%X)\n", err); + + + + err = snd_pcm_new(chip->card, "Audiowerk2 capture", 2, 0, 1, + &pcm_capture); + + if (err < 0) { + printk(KERN_ERR "aw2: snd_pcm_new error (0x%X)\n", err); + return err; + } + + /* Creation ok */ + pcm_device = &chip->device_capture[NUM_STREAM_CAPTURE_ANA]; + + /* Set PCM device name */ + strcpy(pcm_capture->name, "Capture"); + /* Associate private data to PCM device */ + pcm_capture->private_data = pcm_device; + /* set operators of PCM device */ + snd_pcm_set_ops(pcm_capture, SNDRV_PCM_STREAM_CAPTURE, + &snd_aw2_capture_ops); + /* store PCM device */ + pcm_device->pcm = pcm_capture; + /* give base chip pointer to our internal pcm device + structure */ + pcm_device->chip = chip; + /* Give stream number to PCM device */ + pcm_device->stream_number = NUM_STREAM_CAPTURE_ANA; + + /* pre-allocation of buffers */ + /* Preallocate continuous pages. */ + err = snd_pcm_lib_preallocate_pages_for_all(pcm_capture, + SNDRV_DMA_TYPE_DEV, + snd_dma_pci_data + (chip->pci), + 64 * 1024, 64 * 1024); + if (err) + printk(KERN_ERR + "aw2: snd_pcm_lib_preallocate_pages_for_all error " + "(0x%X)\n", err); + + + /* Create control */ + err = snd_ctl_add(chip->card, snd_ctl_new1(&aw2_control, chip)); + if (err < 0) { + printk(KERN_ERR "aw2: snd_ctl_add error (0x%X)\n", err); + return err; + } + + return 0; +} + +static int snd_aw2_control_switch_capture_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static char *texts[2] = { + "Analog", "Digital" + }; + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + uinfo->value.enumerated.items = 2; + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) { + uinfo->value.enumerated.item = + uinfo->value.enumerated.items - 1; + } + strcpy(uinfo->value.enumerated.name, + texts[uinfo->value.enumerated.item]); + return 0; +} + +static int snd_aw2_control_switch_capture_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol) +{ + struct aw2 *chip = snd_kcontrol_chip(kcontrol); + if (snd_aw2_saa7146_is_using_digital_input(&chip->saa7146)) + ucontrol->value.enumerated.item[0] = CTL_ROUTE_DIGITAL; + else + ucontrol->value.enumerated.item[0] = CTL_ROUTE_ANALOG; + return 0; +} + +static int snd_aw2_control_switch_capture_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value + *ucontrol) +{ + struct aw2 *chip = snd_kcontrol_chip(kcontrol); + int changed = 0; + int is_disgital = + snd_aw2_saa7146_is_using_digital_input(&chip->saa7146); + + if (((ucontrol->value.integer.value[0] == CTL_ROUTE_DIGITAL) + && !is_disgital) + || ((ucontrol->value.integer.value[0] == CTL_ROUTE_ANALOG) + && is_disgital)) { + snd_aw2_saa7146_use_digital_input(&chip->saa7146, !is_disgital); + changed = 1; + } + return changed; +} diff --git a/sound/pci/aw2/aw2-saa7146.c b/sound/pci/aw2/aw2-saa7146.c new file mode 100644 index 000000000000..f20f213489a3 --- /dev/null +++ b/sound/pci/aw2/aw2-saa7146.c @@ -0,0 +1,464 @@ +/***************************************************************************** + * + * Copyright (C) 2008 Cedric Bregardis and + * Jean-Christian Hassler + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#define AW2_SAA7146_M + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "aw2-tsl.h" +#include "saa7146.h" +#include "aw2-saa7146.h" + +#define WRITEREG(value, addr) writel((value), chip->base_addr + (addr)) +#define READREG(addr) readl(chip->base_addr + (addr)) + +static struct snd_aw2_saa7146_cb_param + arr_substream_it_playback_cb[NB_STREAM_PLAYBACK]; +static struct snd_aw2_saa7146_cb_param + arr_substream_it_capture_cb[NB_STREAM_CAPTURE]; + +static int snd_aw2_saa7146_get_limit(int size); + +/* chip-specific destructor */ +int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip) +{ + /* disable all irqs */ + WRITEREG(0, IER); + + /* reset saa7146 */ + WRITEREG((MRST_N << 16), MC1); + + /* Unset base addr */ + chip->base_addr = NULL; + + return 0; +} + +void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip, + void __iomem *pci_base_addr) +{ + /* set PCI burst/threshold + + Burst length definition + VALUE BURST LENGTH + 000 1 Dword + 001 2 Dwords + 010 4 Dwords + 011 8 Dwords + 100 16 Dwords + 101 32 Dwords + 110 64 Dwords + 111 128 Dwords + + Threshold definition + VALUE WRITE MODE READ MODE + 00 1 Dword of valid data 1 empty Dword + 01 4 Dwords of valid data 4 empty Dwords + 10 8 Dwords of valid data 8 empty Dwords + 11 16 Dwords of valid data 16 empty Dwords */ + + unsigned int acon2; + unsigned int acon1 = 0; + int i; + + /* Set base addr */ + chip->base_addr = pci_base_addr; + + /* disable all irqs */ + WRITEREG(0, IER); + + /* reset saa7146 */ + WRITEREG((MRST_N << 16), MC1); + + /* enable audio interface */ +#ifdef __BIG_ENDIAN + acon1 |= A1_SWAP; + acon1 |= A2_SWAP; +#endif + /* WS0_CTRL, WS0_SYNC: input TSL1, I2S */ + + /* At initialization WS1 and WS2 are disbaled (configured as input */ + acon1 |= 0 * WS1_CTRL; + acon1 |= 0 * WS2_CTRL; + + /* WS4 is not used. So it must not restart A2. + This is why it is configured as output (force to low) */ + acon1 |= 3 * WS4_CTRL; + + /* WS3_CTRL, WS3_SYNC: output TSL2, I2S */ + acon1 |= 2 * WS3_CTRL; + + /* A1 and A2 are active and asynchronous */ + acon1 |= 3 * AUDIO_MODE; + WRITEREG(acon1, ACON1); + + /* The following comes from original windows driver. + It is needed to have a correct behavior of input and output + simultenously, but I don't know why ! */ + WRITEREG(3 * (BurstA1_in) + 3 * (ThreshA1_in) + + 3 * (BurstA1_out) + 3 * (ThreshA1_out) + + 3 * (BurstA2_out) + 3 * (ThreshA2_out), PCI_BT_A); + + /* enable audio port pins */ + WRITEREG((EAP << 16) | EAP, MC1); + + /* enable I2C */ + WRITEREG((EI2C << 16) | EI2C, MC1); + /* enable interrupts */ + WRITEREG(A1_out | A2_out | A1_in | IIC_S | IIC_E, IER); + + /* audio configuration */ + acon2 = A2_CLKSRC | BCLK1_OEN; + WRITEREG(acon2, ACON2); + + /* By default use analog input */ + snd_aw2_saa7146_use_digital_input(chip, 0); + + /* TSL setup */ + for (i = 0; i < 8; ++i) { + WRITEREG(tsl1[i], TSL1 + (i * 4)); + WRITEREG(tsl2[i], TSL2 + (i * 4)); + } + +} + +void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size) +{ + unsigned long dw_page, dw_limit; + + /* Configure DMA for substream + Configuration informations: ALSA has allocated continuous memory + pages. So we don't need to use MMU of saa7146. + */ + + /* No MMU -> nothing to do with PageA1, we only configure the limit of + PageAx_out register */ + /* Disable MMU */ + dw_page = (0L << 11); + + /* Configure Limit for DMA access. + The limit register defines an address limit, which generates + an interrupt if passed by the actual PCI address pointer. + '0001' means an interrupt will be generated if the lower + 6 bits (64 bytes) of the PCI address are zero. '0010' + defines a limit of 128 bytes, '0011' one of 256 bytes, and + so on up to 1 Mbyte defined by '1111'. This interrupt range + can be calculated as follows: + Range = 2^(5 + Limit) bytes. + */ + dw_limit = snd_aw2_saa7146_get_limit(period_size); + dw_page |= (dw_limit << 4); + + if (stream_number == 0) { + WRITEREG(dw_page, PageA2_out); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA2_out); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA2_out); + + } else if (stream_number == 1) { + WRITEREG(dw_page, PageA1_out); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA1_out); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA1_out); + } else { + printk(KERN_ERR + "aw2: snd_aw2_saa7146_pcm_init_playback: " + "Substream number is not 0 or 1 -> not managed\n"); + } +} + +void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip, + int stream_number, unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size) +{ + unsigned long dw_page, dw_limit; + + /* Configure DMA for substream + Configuration informations: ALSA has allocated continuous memory + pages. So we don't need to use MMU of saa7146. + */ + + /* No MMU -> nothing to do with PageA1, we only configure the limit of + PageAx_out register */ + /* Disable MMU */ + dw_page = (0L << 11); + + /* Configure Limit for DMA access. + The limit register defines an address limit, which generates + an interrupt if passed by the actual PCI address pointer. + '0001' means an interrupt will be generated if the lower + 6 bits (64 bytes) of the PCI address are zero. '0010' + defines a limit of 128 bytes, '0011' one of 256 bytes, and + so on up to 1 Mbyte defined by '1111'. This interrupt range + can be calculated as follows: + Range = 2^(5 + Limit) bytes. + */ + dw_limit = snd_aw2_saa7146_get_limit(period_size); + dw_page |= (dw_limit << 4); + + if (stream_number == 0) { + WRITEREG(dw_page, PageA1_in); + + /* Base address for DMA transfert. */ + /* This address has been reserved by ALSA. */ + /* This is a physical address */ + WRITEREG(dma_addr, BaseA1_in); + + /* Define upper limit for DMA access */ + WRITEREG(dma_addr + buffer_size, ProtA1_in); + } else { + printk(KERN_ERR + "aw2: snd_aw2_saa7146_pcm_init_capture: " + "Substream number is not 0 -> not managed\n"); + } +} + +void snd_aw2_saa7146_define_it_playback_callback(unsigned int stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param) +{ + if (stream_number < NB_STREAM_PLAYBACK) { + arr_substream_it_playback_cb[stream_number].p_it_callback = + (snd_aw2_saa7146_it_cb) p_it_callback; + arr_substream_it_playback_cb[stream_number].p_callback_param = + (void *)p_callback_param; + } +} + +void snd_aw2_saa7146_define_it_capture_callback(unsigned int stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param) +{ + if (stream_number < NB_STREAM_CAPTURE) { + arr_substream_it_capture_cb[stream_number].p_it_callback = + (snd_aw2_saa7146_it_cb) p_it_callback; + arr_substream_it_capture_cb[stream_number].p_callback_param = + (void *)p_callback_param; + } +} + +void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146 *chip, + int stream_number) +{ + unsigned int acon1 = 0; + /* In aw8 driver, dma transfert is always active. It is + started and stopped in a larger "space" */ + acon1 = READREG(ACON1); + if (stream_number == 0) { + WRITEREG((TR_E_A2_OUT << 16) | TR_E_A2_OUT, MC1); + + /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */ + acon1 |= 2 * WS2_CTRL; + WRITEREG(acon1, ACON1); + + } else if (stream_number == 1) { + WRITEREG((TR_E_A1_OUT << 16) | TR_E_A1_OUT, MC1); + + /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */ + acon1 |= 1 * WS1_CTRL; + WRITEREG(acon1, ACON1); + } +} + +void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146 *chip, + int stream_number) +{ + unsigned int acon1 = 0; + acon1 = READREG(ACON1); + if (stream_number == 0) { + /* WS2_CTRL, WS2_SYNC: output TSL2, I2S */ + acon1 &= ~(3 * WS2_CTRL); + WRITEREG(acon1, ACON1); + + WRITEREG((TR_E_A2_OUT << 16), MC1); + } else if (stream_number == 1) { + /* WS1_CTRL, WS1_SYNC: output TSL1, I2S */ + acon1 &= ~(3 * WS1_CTRL); + WRITEREG(acon1, ACON1); + + WRITEREG((TR_E_A1_OUT << 16), MC1); + } +} + +void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146 *chip, + int stream_number) +{ + /* In aw8 driver, dma transfert is always active. It is + started and stopped in a larger "space" */ + if (stream_number == 0) + WRITEREG((TR_E_A1_IN << 16) | TR_E_A1_IN, MC1); +} + +void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146 *chip, + int stream_number) +{ + if (stream_number == 0) + WRITEREG((TR_E_A1_IN << 16), MC1); +} + +irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id) +{ + unsigned int isr; + unsigned int iicsta; + struct snd_aw2_saa7146 *chip = dev_id; + + isr = READREG(ISR); + if (!isr) + return IRQ_NONE; + + WRITEREG(isr, ISR); + + if (isr & (IIC_S | IIC_E)) { + iicsta = READREG(IICSTA); + WRITEREG(0x100, IICSTA); + } + + if (isr & A1_out) { + if (arr_substream_it_playback_cb[1].p_it_callback != NULL) { + arr_substream_it_playback_cb[1]. + p_it_callback(arr_substream_it_playback_cb[1]. + p_callback_param); + } + } + if (isr & A2_out) { + if (arr_substream_it_playback_cb[0].p_it_callback != NULL) { + arr_substream_it_playback_cb[0]. + p_it_callback(arr_substream_it_playback_cb[0]. + p_callback_param); + } + + } + if (isr & A1_in) { + if (arr_substream_it_capture_cb[0].p_it_callback != NULL) { + arr_substream_it_capture_cb[0]. + p_it_callback(arr_substream_it_capture_cb[0]. + p_callback_param); + } + } + return IRQ_HANDLED; +} + +unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146 *chip, + int stream_number, + unsigned char *start_addr, + unsigned int buffer_size) +{ + long pci_adp = 0; + size_t ptr = 0; + + if (stream_number == 0) { + pci_adp = READREG(PCI_ADP3); + ptr = pci_adp - (long)start_addr; + + if (ptr == buffer_size) + ptr = 0; + } + if (stream_number == 1) { + pci_adp = READREG(PCI_ADP1); + ptr = pci_adp - (size_t) start_addr; + + if (ptr == buffer_size) + ptr = 0; + } + return ptr; +} + +unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146 *chip, + int stream_number, + unsigned char *start_addr, + unsigned int buffer_size) +{ + size_t pci_adp = 0; + size_t ptr = 0; + if (stream_number == 0) { + pci_adp = READREG(PCI_ADP2); + ptr = pci_adp - (size_t) start_addr; + + if (ptr == buffer_size) + ptr = 0; + } + return ptr; +} + +void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip, + int use_digital) +{ + /* FIXME: switch between analog and digital input does not always work. + It can produce a kind of white noise. It seams that received data + are inverted sometime (endian inversion). Why ? I don't know, maybe + a problem of synchronization... However for the time being I have + not found the problem. Workaround: switch again (and again) between + digital and analog input until it works. */ + if (use_digital) + WRITEREG(0x40, GPIO_CTRL); + else + WRITEREG(0x50, GPIO_CTRL); +} + +int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146 *chip) +{ + unsigned int reg_val = READREG(GPIO_CTRL); + if ((reg_val & 0xFF) == 0x40) + return 1; + else + return 0; +} + + +static int snd_aw2_saa7146_get_limit(int size) +{ + int limitsize = 32; + int limit = 0; + while (limitsize < size) { + limitsize *= 2; + limit++; + } + return limit; +} diff --git a/sound/pci/aw2/aw2-saa7146.h b/sound/pci/aw2/aw2-saa7146.h new file mode 100644 index 000000000000..5b35e358937f --- /dev/null +++ b/sound/pci/aw2/aw2-saa7146.h @@ -0,0 +1,105 @@ +/***************************************************************************** + * + * Copyright (C) 2008 Cedric Bregardis and + * Jean-Christian Hassler + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#ifndef AW2_SAA7146_H +#define AW2_SAA7146_H + +#define NB_STREAM_PLAYBACK 2 +#define NB_STREAM_CAPTURE 1 + +#define NUM_STREAM_PLAYBACK_ANA 0 +#define NUM_STREAM_PLAYBACK_DIG 1 + +#define NUM_STREAM_CAPTURE_ANA 0 + +typedef void (*snd_aw2_saa7146_it_cb) (void *); + +struct snd_aw2_saa7146_cb_param { + snd_aw2_saa7146_it_cb p_it_callback; + void *p_callback_param; +}; + +/* definition of the chip-specific record */ + +struct snd_aw2_saa7146 { + void __iomem *base_addr; +}; + +extern void snd_aw2_saa7146_setup(struct snd_aw2_saa7146 *chip, + void __iomem *pci_base_addr); +extern int snd_aw2_saa7146_free(struct snd_aw2_saa7146 *chip); + +extern void snd_aw2_saa7146_pcm_init_playback(struct snd_aw2_saa7146 *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size); +extern void snd_aw2_saa7146_pcm_init_capture(struct snd_aw2_saa7146 *chip, + int stream_number, + unsigned long dma_addr, + unsigned long period_size, + unsigned long buffer_size); +extern void snd_aw2_saa7146_define_it_playback_callback(unsigned int + stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param); +extern void snd_aw2_saa7146_define_it_capture_callback(unsigned int + stream_number, + snd_aw2_saa7146_it_cb + p_it_callback, + void *p_callback_param); +extern void snd_aw2_saa7146_pcm_trigger_start_capture(struct snd_aw2_saa7146 + *chip, int stream_number); +extern void snd_aw2_saa7146_pcm_trigger_stop_capture(struct snd_aw2_saa7146 + *chip, int stream_number); + +extern void snd_aw2_saa7146_pcm_trigger_start_playback(struct snd_aw2_saa7146 + *chip, + int stream_number); +extern void snd_aw2_saa7146_pcm_trigger_stop_playback(struct snd_aw2_saa7146 + *chip, int stream_number); + +extern irqreturn_t snd_aw2_saa7146_interrupt(int irq, void *dev_id); +extern unsigned int snd_aw2_saa7146_get_hw_ptr_playback(struct snd_aw2_saa7146 + *chip, + int stream_number, + unsigned char + *start_addr, + unsigned int + buffer_size); +extern unsigned int snd_aw2_saa7146_get_hw_ptr_capture(struct snd_aw2_saa7146 + *chip, + int stream_number, + unsigned char + *start_addr, + unsigned int + buffer_size); + +extern void snd_aw2_saa7146_use_digital_input(struct snd_aw2_saa7146 *chip, + int use_digital); + +extern int snd_aw2_saa7146_is_using_digital_input(struct snd_aw2_saa7146 + *chip); + +#endif diff --git a/sound/pci/aw2/aw2-tsl.h b/sound/pci/aw2/aw2-tsl.h new file mode 100644 index 000000000000..e8afaa0a468a --- /dev/null +++ b/sound/pci/aw2/aw2-tsl.h @@ -0,0 +1,116 @@ +/***************************************************************************** + * + * Copyright (C) 2008 Cedric Bregardis and + * Jean-Christian Hassler + * Copyright 1998 Emagic Soft- und Hardware GmbH + * Copyright 2002 Martijn Sipkema + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +#define TSL_WS0 (1UL << 31) +#define TSL_WS1 (1UL << 30) +#define TSL_WS2 (1UL << 29) +#define TSL_WS3 (1UL << 28) +#define TSL_WS4 (1UL << 27) +#define TSL_DIS_A1 (1UL << 24) +#define TSL_SDW_A1 (1UL << 23) +#define TSL_SIB_A1 (1UL << 22) +#define TSL_SF_A1 (1UL << 21) +#define TSL_LF_A1 (1UL << 20) +#define TSL_BSEL_A1 (1UL << 17) +#define TSL_DOD_A1 (1UL << 15) +#define TSL_LOW_A1 (1UL << 14) +#define TSL_DIS_A2 (1UL << 11) +#define TSL_SDW_A2 (1UL << 10) +#define TSL_SIB_A2 (1UL << 9) +#define TSL_SF_A2 (1UL << 8) +#define TSL_LF_A2 (1UL << 7) +#define TSL_BSEL_A2 (1UL << 4) +#define TSL_DOD_A2 (1UL << 2) +#define TSL_LOW_A2 (1UL << 1) +#define TSL_EOS (1UL << 0) + + /* Audiowerk8 hardware setup: */ + /* WS0, SD4, TSL1 - Analog/ digital in */ + /* WS1, SD0, TSL1 - Analog out #1, digital out */ + /* WS2, SD2, TSL1 - Analog out #2 */ + /* WS3, SD1, TSL2 - Analog out #3 */ + /* WS4, SD3, TSL2 - Analog out #4 */ + + /* Audiowerk8 timing: */ + /* Timeslot: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | ... */ + + /* A1_INPUT: */ + /* SD4: <_ADC-L_>-------<_ADC-R_>-------< */ + /* WS0: _______________/---------------\_ */ + + /* A1_OUTPUT: */ + /* SD0: <_1-L___>-------<_1-R___>-------< */ + /* WS1: _______________/---------------\_ */ + /* SD2: >-------<_2-L___>-------<_2-R___> */ + /* WS2: -------\_______________/--------- */ + + /* A2_OUTPUT: */ + /* SD1: <_3-L___>-------<_3-R___>-------< */ + /* WS3: _______________/---------------\_ */ + /* SD3: >-------<_4-L___>-------<_4-R___> */ + /* WS4: -------\_______________/--------- */ + +#ifdef __BIG_ENDIAN + /* TODO: not yet implemented */ +#else /* */ + +static int tsl1[8] = { + 1 * TSL_SDW_A1 | 3 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_LF_A1, + + 1 * TSL_SDW_A1 | 2 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 0 * TSL_SDW_A1 | 3 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 0 * TSL_SDW_A1 | 2 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1, + + 1 * TSL_SDW_A1 | 1 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 1 * TSL_SDW_A1 | 0 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 0 * TSL_SDW_A1 | 1 * TSL_BSEL_A1 | + 0 * TSL_DIS_A1 | 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0, + + 0 * TSL_SDW_A1 | 0 * TSL_BSEL_A1 | 0 * TSL_DIS_A1 | + 0 * TSL_DOD_A1 | TSL_WS1 | TSL_WS0 | TSL_SF_A1 | TSL_EOS, +}; + +static int tsl2[8] = { + 0 * TSL_SDW_A2 | 3 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_LF_A2, + 0 * TSL_SDW_A2 | 2 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 3 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 2 * TSL_BSEL_A2 | 2 * TSL_DOD_A2, + 0 * TSL_SDW_A2 | 1 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 0 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 1 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2, + 0 * TSL_SDW_A2 | 0 * TSL_BSEL_A2 | 2 * TSL_DOD_A2 | TSL_WS2 | TSL_EOS +}; + +#endif /* */ diff --git a/sound/pci/aw2/saa7146.h b/sound/pci/aw2/saa7146.h new file mode 100644 index 000000000000..ce0ab5f9ee9c --- /dev/null +++ b/sound/pci/aw2/saa7146.h @@ -0,0 +1,168 @@ +/***************************************************************************** + * + * Copyright (C) 2008 Cedric Bregardis and + * Jean-Christian Hassler + * + * This file is part of the Audiowerk2 ALSA driver + * + * The Audiowerk2 ALSA driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2. + * + * The Audiowerk2 ALSA driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with the Audiowerk2 ALSA driver; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, + * USA. + * + *****************************************************************************/ + +/* SAA7146 registers */ +#define PCI_BT_A 0x4C +#define IICTFR 0x8C +#define IICSTA 0x90 +#define BaseA1_in 0x94 +#define ProtA1_in 0x98 +#define PageA1_in 0x9C +#define BaseA1_out 0xA0 +#define ProtA1_out 0xA4 +#define PageA1_out 0xA8 +#define BaseA2_in 0xAC +#define ProtA2_in 0xB0 +#define PageA2_in 0xB4 +#define BaseA2_out 0xB8 +#define ProtA2_out 0xBC +#define PageA2_out 0xC0 +#define IER 0xDC +#define GPIO_CTRL 0xE0 +#define ACON1 0xF4 +#define ACON2 0xF8 +#define MC1 0xFC +#define MC2 0x100 +#define ISR 0x10C +#define PSR 0x110 +#define SSR 0x114 +#define PCI_ADP1 0x12C +#define PCI_ADP2 0x130 +#define PCI_ADP3 0x134 +#define PCI_ADP4 0x138 +#define LEVEL_REP 0x140 +#define FB_BUFFER1 0x144 +#define FB_BUFFER2 0x148 +#define TSL1 0x180 +#define TSL2 0x1C0 + +#define ME (1UL << 11) +#define LIMIT (1UL << 4) +#define PV (1UL << 3) + +/* PSR/ISR/IER */ +#define PPEF (1UL << 31) +#define PABO (1UL << 30) +#define IIC_S (1UL << 17) +#define IIC_E (1UL << 16) +#define A2_in (1UL << 15) +#define A2_out (1UL << 14) +#define A1_in (1UL << 13) +#define A1_out (1UL << 12) +#define AFOU (1UL << 11) +#define PIN3 (1UL << 6) +#define PIN2 (1UL << 5) +#define PIN1 (1UL << 4) +#define PIN0 (1UL << 3) +#define ECS (1UL << 2) +#define EC3S (1UL << 1) +#define EC0S (1UL << 0) + +/* SSR */ +#define PRQ (1UL << 31) +#define PMA (1UL << 30) +#define IIC_EA (1UL << 21) +#define IIC_EW (1UL << 20) +#define IIC_ER (1UL << 19) +#define IIC_EL (1UL << 18) +#define IIC_EF (1UL << 17) +#define AF2_in (1UL << 10) +#define AF2_out (1UL << 9) +#define AF1_in (1UL << 8) +#define AF1_out (1UL << 7) +#define EC5S (1UL << 3) +#define EC4S (1UL << 2) +#define EC2S (1UL << 1) +#define EC1S (1UL << 0) + +/* PCI_BT_A */ +#define BurstA1_in (1UL << 26) +#define ThreshA1_in (1UL << 24) +#define BurstA1_out (1UL << 18) +#define ThreshA1_out (1UL << 16) +#define BurstA2_in (1UL << 10) +#define ThreshA2_in (1UL << 8) +#define BurstA2_out (1UL << 2) +#define ThreshA2_out (1UL << 0) + +/* MC1 */ +#define MRST_N (1UL << 15) +#define EAP (1UL << 9) +#define EI2C (1UL << 8) +#define TR_E_A2_OUT (1UL << 3) +#define TR_E_A2_IN (1UL << 2) +#define TR_E_A1_OUT (1UL << 1) +#define TR_E_A1_IN (1UL << 0) + +/* MC2 */ +#define UPLD_IIC (1UL << 0) + +/* ACON1 */ +#define AUDIO_MODE (1UL << 29) +#define MAXLEVEL (1UL << 22) +#define A1_SWAP (1UL << 21) +#define A2_SWAP (1UL << 20) +#define WS0_CTRL (1UL << 18) +#define WS0_SYNC (1UL << 16) +#define WS1_CTRL (1UL << 14) +#define WS1_SYNC (1UL << 12) +#define WS2_CTRL (1UL << 10) +#define WS2_SYNC (1UL << 8) +#define WS3_CTRL (1UL << 6) +#define WS3_SYNC (1UL << 4) +#define WS4_CTRL (1UL << 2) +#define WS4_SYNC (1UL << 0) + +/* ACON2 */ +#define A1_CLKSRC (1UL << 27) +#define A2_CLKSRC (1UL << 22) +#define INVERT_BCLK1 (1UL << 21) +#define INVERT_BCLK2 (1UL << 20) +#define BCLK1_OEN (1UL << 19) +#define BCLK2_OEN (1UL << 18) + +/* IICSTA */ +#define IICCC (1UL << 8) +#define ABORT (1UL << 7) +#define SPERR (1UL << 6) +#define APERR (1UL << 5) +#define DTERR (1UL << 4) +#define DRERR (1UL << 3) +#define AL (1UL << 2) +#define ERR (1UL << 1) +#define BUSY (1UL << 0) + +/* IICTFR */ +#define BYTE2 (1UL << 24) +#define BYTE1 (1UL << 16) +#define BYTE0 (1UL << 8) +#define ATRR2 (1UL << 6) +#define ATRR1 (1UL << 4) +#define ATRR0 (1UL << 2) +#define ERR (1UL << 1) +#define BUSY (1UL << 0) + +#define START 3 +#define CONT 2 +#define STOP 1 +#define NOP 0 -- cgit v1.2.3-58-ga151