From 9700e6befea505b03b6e625536a9a106811e9a14 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Sat, 7 Jul 2007 22:48:31 -0700 Subject: [BNX2]: Add remote PHY bit definitions. Add new fields in struct bnx2 and other bit definitions in shared memory to support remote PHY. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.h | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 49a5de253b17..14c0a1e25b15 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6537,6 +6537,7 @@ struct bnx2 { #define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 #define PHY_INT_MODE_LINK_READY_FLAG 0x200 #define PHY_DIS_EARLY_DAC_FLAG 0x400 +#define REMOTE_PHY_CAP_FLAG 0x800 u32 mii_bmcr; u32 mii_bmsr; @@ -6625,6 +6626,7 @@ struct bnx2 { u16 req_line_speed; u8 req_duplex; + u8 phy_port; u8 link_up; u16 line_speed; @@ -6770,7 +6772,7 @@ struct fw_info { * the firmware has timed out, the driver will assume there is no firmware * running and there won't be any firmware-driver synchronization during a * driver reset. */ -#define FW_ACK_TIME_OUT_MS 100 +#define FW_ACK_TIME_OUT_MS 1000 #define BNX2_DRV_RESET_SIGNATURE 0x00000000 @@ -6788,6 +6790,7 @@ struct fw_info { #define BNX2_DRV_MSG_CODE_DIAG 0x07000000 #define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 #define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000 +#define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000 #define BNX2_DRV_MSG_DATA 0x00ff0000 #define BNX2_DRV_MSG_DATA_WAIT0 0x00010000 @@ -6845,6 +6848,30 @@ struct fw_info { * This is used for debugging. */ #define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00080000 +#define BNX2_DRV_MB_ARG0 0x00000014 +#define BNX2_NETLINK_SET_LINK_SPEED_10HALF (1<<0) +#define BNX2_NETLINK_SET_LINK_SPEED_10FULL (1<<1) +#define BNX2_NETLINK_SET_LINK_SPEED_10 \ + (BNX2_NETLINK_SET_LINK_SPEED_10HALF | \ + BNX2_NETLINK_SET_LINK_SPEED_10FULL) +#define BNX2_NETLINK_SET_LINK_SPEED_100HALF (1<<2) +#define BNX2_NETLINK_SET_LINK_SPEED_100FULL (1<<3) +#define BNX2_NETLINK_SET_LINK_SPEED_100 \ + (BNX2_NETLINK_SET_LINK_SPEED_100HALF | \ + BNX2_NETLINK_SET_LINK_SPEED_100FULL) +#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF (1<<4) +#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL (1<<5) +#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF (1<<6) +#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL (1<<7) +#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF (1<<8) +#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL (1<<9) +#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG (1<<10) +#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE (1<<11) +#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE (1<<12) +#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE (1<<13) +#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED (1<<14) +#define BNX2_NETLINK_SET_LINK_PHY_RESET (1<<15) + #define BNX2_DEV_INFO_SIGNATURE 0x00000020 #define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900 #define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00 @@ -7065,6 +7092,28 @@ struct fw_info { #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff +#define BNX2_FW_EVT_CODE_MB 0x354 +#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000 +#define BNX2_FW_EVT_CODE_LINK_EVENT 0x00000001 + +#define BNX2_DRV_ACK_CAP_MB 0x364 +#define BNX2_DRV_ACK_CAP_SIGNATURE 0x35450000 +#define BNX2_CAPABILITY_SIGNATURE_MASK 0xFFFF0000 + +#define BNX2_FW_CAP_MB 0x368 +#define BNX2_FW_CAP_SIGNATURE 0xaa550000 +#define BNX2_FW_ACK_DRV_SIGNATURE 0x52500000 +#define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000 +#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001 +#define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002 + +#define BNX2_RPHY_SIGNATURE 0x36c +#define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a + +#define BNX2_RPHY_FLAGS 0x370 +#define BNX2_RPHY_SERDES_LINK 0x374 +#define BNX2_RPHY_COPPER_LINK 0x378 + #define HOST_VIEW_SHMEM_BASE 0x167c00 #endif -- cgit v1.2.3-58-ga151