From 903e2bbda92e5a14f8050154046a14230abb800b Mon Sep 17 00:00:00 2001 From: Marc Singer Date: Tue, 16 May 2006 11:41:30 +0100 Subject: [ARM] 3404/1: lpd7a40x: AMBA CLCD support Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: Marc Singer Signed-off-by: Russell King --- arch/arm/mach-lh7a40x/clcd.c | 241 +++++++++++++++++++++++++++++++++++++++++++ drivers/video/Kconfig | 63 +++++++++++ 2 files changed, 304 insertions(+) create mode 100644 arch/arm/mach-lh7a40x/clcd.c diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c new file mode 100644 index 000000000000..93751fee793d --- /dev/null +++ b/arch/arm/mach-lh7a40x/clcd.c @@ -0,0 +1,241 @@ +/* + * arch/arm/mach-lh7a40x/clcd.c + * + * Copyright (C) 2004 Marc Singer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include + +//#include +//#include +//#include + +//#include +#include +#include + +#include +#include +#include +#include + +#define HRTFTC_HRSETUP __REG(HRTFTC_PHYS + 0x00) +#define HRTFTC_HRCON __REG(HRTFTC_PHYS + 0x04) +#define HRTFTC_HRTIMING1 __REG(HRTFTC_PHYS + 0x08) +#define HRTFTC_HRTIMING2 __REG(HRTFTC_PHYS + 0x0c) + +#define ALI_SETUP __REG(ALI_PHYS + 0x00) +#define ALI_CONTROL __REG(ALI_PHYS + 0x04) +#define ALI_TIMING1 __REG(ALI_PHYS + 0x08) +#define ALI_TIMING2 __REG(ALI_PHYS + 0x0c) + +#include "lcd-panel.h" + +static void lh7a40x_clcd_disable (struct clcd_fb *fb) +{ +#if defined (CONFIG_MACH_LPD7A400) + CPLD_CONTROL &= ~(1<<1); /* Disable LCD Vee */ +#endif + +#if defined (CONFIG_MACH_LPD7A404) + GPIO_PCD &= ~(1<<3); /* Disable LCD Vee */ +#endif + +#if defined (CONFIG_ARCH_LH7A400) + HRTFTC_HRSETUP &= ~(1<<13); /* Disable HRTFT controller */ +#endif + +#if defined (CONFIG_ARCH_LH7A404) + ALI_SETUP &= ~(1<<13); /* Disable ALI */ +#endif +} + +static void lh7a40x_clcd_enable (struct clcd_fb *fb) +{ + struct clcd_panel_extra* extra + = (struct clcd_panel_extra*) fb->board_data; + +#if defined (CONFIG_MACH_LPD7A400) + CPLD_CONTROL |= (1<<1); /* Enable LCD Vee */ +#endif + +#if defined (CONFIG_MACH_LPD7A404) + GPIO_PCDD &= ~(1<<3); /* Enable LCD Vee */ + GPIO_PCD |= (1<<3); +#endif + +#if defined (CONFIG_ARCH_LH7A400) + + if (extra) { + HRTFTC_HRSETUP + = (1 << 13) + | ((fb->fb.var.xres - 1) << 4) + | 0xc + | (extra->hrmode ? 1 : 0); + HRTFTC_HRCON + = ((extra->clsen ? 1 : 0) << 1) + | ((extra->spsen ? 1 : 0) << 0); + HRTFTC_HRTIMING1 + = (extra->pcdel << 8) + | (extra->revdel << 4) + | (extra->lpdel << 0); + HRTFTC_HRTIMING2 + = (extra->spldel << 9) + | (extra->pc2del << 0); + } + else + HRTFTC_HRSETUP + = (1 << 13) + | 0xc; +#endif + +#if defined (CONFIG_ARCH_LH7A404) + + if (extra) { + ALI_SETUP + = (1 << 13) + | ((fb->fb.var.xres - 1) << 4) + | 0xc + | (extra->hrmode ? 1 : 0); + ALI_CONTROL + = ((extra->clsen ? 1 : 0) << 1) + | ((extra->spsen ? 1 : 0) << 0); + ALI_TIMING1 + = (extra->pcdel << 8) + | (extra->revdel << 4) + | (extra->lpdel << 0); + ALI_TIMING2 + = (extra->spldel << 9) + | (extra->pc2del << 0); + } + else + ALI_SETUP + = (1 << 13) + | 0xc; +#endif + +} + +#define FRAMESIZE(s) (((s) + PAGE_SIZE - 1)&PAGE_MASK) + +static int lh7a40x_clcd_setup (struct clcd_fb *fb) +{ + dma_addr_t dma; + u32 len = FRAMESIZE (lcd_panel.mode.xres*lcd_panel.mode.yres + *(lcd_panel.bpp/8)); + + fb->panel = &lcd_panel; + + /* Enforce the sync polarity defaults */ + if (!(fb->panel->tim2 & TIM2_IHS)) + fb->fb.var.sync |= FB_SYNC_HOR_HIGH_ACT; + if (!(fb->panel->tim2 & TIM2_IVS)) + fb->fb.var.sync |= FB_SYNC_VERT_HIGH_ACT; + +#if defined (HAS_LCD_PANEL_EXTRA) + fb->board_data = &lcd_panel_extra; +#endif + + fb->fb.screen_base + = dma_alloc_writecombine (&fb->dev->dev, len, + &dma, GFP_KERNEL); + printk ("CLCD: LCD setup fb virt 0x%p phys 0x%p l %x io 0x%p \n", + fb->fb.screen_base, (void*) dma, len, + (void*) io_p2v (CLCDC_PHYS)); + printk ("CLCD: pixclock %d\n", lcd_panel.mode.pixclock); + + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + +#if defined (USE_RGB555) + fb->fb.var.green.length = 5; /* Panel uses RGB 5:5:5 */ +#endif + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = len; + + /* Drive PE4 high to prevent CPLD crash */ + GPIO_PEDD |= (1<<4); + GPIO_PED |= (1<<4); + + GPIO_PINMUX |= (1<<1) | (1<<0); /* LCDVD[15:4] */ + +// fb->fb.fbops->fb_check_var (&fb->fb.var, &fb->fb); +// fb->fb.fbops->fb_set_par (&fb->fb); + + return 0; +} + +static int lh7a40x_clcd_mmap (struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void lh7a40x_clcd_remove (struct clcd_fb *fb) +{ + dma_free_writecombine (&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +static struct clcd_board clcd_platform_data = { + .name = "lh7a40x FB", + .check = clcdfb_check, + .decode = clcdfb_decode, + .enable = lh7a40x_clcd_enable, + .setup = lh7a40x_clcd_setup, + .mmap = lh7a40x_clcd_mmap, + .remove = lh7a40x_clcd_remove, + .disable = lh7a40x_clcd_disable, +}; + +#define IRQ_CLCDC (IRQ_LCDINTR) + +#define AMBA_DEVICE(name,busid,base,plat,pid) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .bus_id = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = base##_PHYS, \ + .end = (base##_PHYS) + (4*1024) - 1, \ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = { IRQ_##base, }, \ + /* .dma = base##_DMA,*/ \ + .periphid = pid, \ +} + +AMBA_DEVICE(clcd, "cldc-lh7a40x", CLCDC, &clcd_platform_data, 0x41110); + +static struct amba_device *amba_devs[] __initdata = { + &clcd_device, +}; + +void __init lh7a40x_clcd_init (void) +{ + int i; + int result; + printk ("CLCD: registering amba devices\n"); + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + result = amba_device_register(d, &iomem_resource); + printk (" %d -> %d\n", i ,result); + } +} diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4587087d777a..a3024eb28dc5 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -167,6 +167,69 @@ config FB_ARMCLCD here and read . The module will be called amba-clcd. +choice + + depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X) + prompt "LCD Panel" + default FB_ARMCLCD_SHARP_LQ035Q7DB02 + +config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT + bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC" + help + This is an implementation of the Sharp LQ035Q7DB02, a 3.5" + color QVGA, HRTFT panel. The LogicPD device includes an + an integrated HRTFT controller IC. + The native resolution is 240x320. + +config FB_ARMCLCD_SHARP_LQ057Q3DC02 + bool "LogicPD LCD 5.7\" QVGA" + help + This is an implementation of the Sharp LQ057Q3DC02, a 5.7" + color QVGA, TFT panel. The LogicPD device includes an + The native resolution is 320x240. + +config FB_ARMCLCD_SHARP_LQ64D343 + bool "LogicPD LCD 6.4\" VGA" + help + This is an implementation of the Sharp LQ64D343, a 6.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + +config FB_ARMCLCD_SHARP_LQ10D368 + bool "LogicPD LCD 10.4\" VGA" + help + This is an implementation of the Sharp LQ10D368, a 10.4" + color VGA, TFT panel. The LogicPD device includes an + The native resolution is 640x480. + + +config FB_ARMCLCD_SHARP_LQ121S1DG41 + bool "LogicPD LCD 12.1\" SVGA" + help + This is an implementation of the Sharp LQ121S1DG41, a 12.1" + color SVGA, TFT panel. The LogicPD device includes an + The native resolution is 800x600. + + This panel requires a clock rate may be an integer fraction + of the base LCDCLK frequency. The driver will select the + highest frequency available that is lower than the maximum + allowed. The panel may flicker if the clock rate is + slower than the recommended minimum. + +config FB_ARMCLCD_AUO_A070VW01_WIDE + bool "AU Optronics A070VW01 LCD 7.0\" WIDE" + help + This is an implementation of the AU Optronics, a 7.0" + WIDE Color. The native resolution is 234x480. + +config FB_ARMCLCD_HITACHI + bool "Hitachi Wide Screen 800x480" + help + This is an implementation of the Hitachi 800x480. + +endchoice + + config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) -- cgit v1.2.3-58-ga151