From 43309f3b521302bb66c4c9e66704dd3675e4d725 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:22 +0800 Subject: i2c: imx: check busy bit when START/STOP The controller can't do anything else before it actually generates START/STOP. So we check busy bit to make sure START/STOP is successfully finished. If we don't check busy bit, START/STOP may fail on some fast CPUs. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 62 +++++++++++++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 4afba3ec2a61..6055e92f0ac8 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -120,19 +120,25 @@ struct imx_i2c_struct { wait_queue_head_t queue; unsigned long i2csr; unsigned int disable_delay; + int stopped; }; /** Functions for IMX I2C adapter driver *************************************** *******************************************************************************/ -static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) { unsigned long orig_jiffies = jiffies; + unsigned int temp; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* wait for bus not busy */ - while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) { + while (1) { + temp = readb(i2c_imx->base + IMX_I2C_I2SR); + if (for_busy && (temp & I2SR_IBB)) + break; + if (!for_busy && !(temp & I2SR_IBB)) + break; if (signal_pending(current)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C Interrupted\n", __func__); @@ -179,39 +185,55 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) return 0; } -static void i2c_imx_start(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; + int result; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); /* Enable I2C controller */ + writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); + + /* Wait controller to be stable */ + udelay(50); + /* Start I2C transaction */ temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_MSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + return result; + i2c_imx->stopped = 0; + temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + return result; } static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; - /* Stop I2C transaction */ - dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); - /* setup chip registers to defaults */ - writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); - writeb(0, i2c_imx->base + IMX_I2C_I2SR); + if (!i2c_imx->stopped) { + /* Stop I2C transaction */ + dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp &= ~(I2CR_MSTA | I2CR_MTX); + writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx->stopped = 1; + } /* * This delay caused by an i.MXL hardware bug. * If no (or too short) delay, no "STOP" bit will be generated. */ udelay(i2c_imx->disable_delay); + + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0); + /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); } @@ -341,11 +363,15 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) if (result) return result; if (i == (msgs->len - 1)) { + /* It must generate STOP before read I2DR to prevent + controller from generating another clock cycle */ dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; + temp &= ~(I2CR_MSTA | I2CR_MTX); writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx->stopped = 1; } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> set TXAK\n", __func__); @@ -370,14 +396,11 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* Check if i2c bus is not busy */ - result = i2c_imx_bus_busy(i2c_imx); + /* Start I2C transfer */ + result = i2c_imx_start(i2c_imx); if (result) goto fail0; - /* Start I2C transfer */ - i2c_imx_start(i2c_imx); - /* read/write data */ for (i = 0; i < num; i++) { if (i) { @@ -386,6 +409,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_RSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + goto fail0; } dev_dbg(&i2c_imx->adapter.dev, "<%s> transfer message: %d\n", __func__, i); -- cgit v1.2.3-58-ga151 From a4094a76e6a45691b8f9108060b750a48b4c4563 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:23 +0800 Subject: i2c: imx: only imx1 needs disable delay check cpu_is_mx1() when disable delay. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 6055e92f0ac8..671d37c23f4c 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -225,11 +225,13 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) writeb(temp, i2c_imx->base + IMX_I2C_I2CR); i2c_imx->stopped = 1; } - /* - * This delay caused by an i.MXL hardware bug. - * If no (or too short) delay, no "STOP" bit will be generated. - */ - udelay(i2c_imx->disable_delay); + if (cpu_is_mx1()) { + /* + * This delay caused by an i.MXL hardware bug. + * If no (or too short) delay, no "STOP" bit will be generated. + */ + udelay(i2c_imx->disable_delay); + } if (!i2c_imx->stopped) i2c_imx_bus_busy(i2c_imx, 0); -- cgit v1.2.3-58-ga151 From db3a3d4ef7f676501325ae9c7ce0c193c2c1b28f Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:24 +0800 Subject: i2c: imx: disable clock when it's possible to save power. Enable clock before START, disable it after STOP. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 671d37c23f4c..e3654d683e15 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -121,6 +121,7 @@ struct imx_i2c_struct { unsigned long i2csr; unsigned int disable_delay; int stopped; + unsigned int ifdr; /* IMX_I2C_IFDR */ }; /** Functions for IMX I2C adapter driver *************************************** @@ -192,6 +193,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + clk_enable(i2c_imx->clk); + writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); /* Enable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); @@ -238,6 +241,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); + clk_disable(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, @@ -257,8 +261,8 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, else for (i = 0; i2c_clk_div[i][0] < div; i++); - /* Write divider value to register */ - writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR); + /* Store divider value */ + i2c_imx->ifdr = i2c_clk_div[i][1]; /* * There dummy delay is calculated. @@ -528,7 +532,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get I2C clock\n"); goto fail3; } - clk_enable(i2c_imx->clk); /* Request IRQ */ ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); @@ -577,7 +580,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) fail5: free_irq(i2c_imx->irq, i2c_imx); fail4: - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); fail3: release_mem_region(i2c_imx->res->start, resource_size(res)); @@ -614,8 +616,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) if (pdata && pdata->exit) pdata->exit(&pdev->dev); - /* Disable I2C clock */ - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); -- cgit v1.2.3-58-ga151 From 45da790ebe746bb29f7e4adf806c020db6ff7755 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 13 Oct 2009 10:12:03 +0200 Subject: i2c-mpc: Do not generate STOP after read. The driver always ends a read with a STOP condition which breaks subsequent I2C reads/writes in the same transaction as these expect to do a repeated START(ReSTART). This will also help I2C multimaster as the bus will not be released after the first read, but when the whole transaction ends. Signed-off-by: Joakim Tjernlund Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-mpc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index d325e86e3103..f627001108b8 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -365,9 +365,6 @@ static int mpc_write(struct mpc_i2c *i2c, int target, unsigned timeout = i2c->adap.timeout; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Start as master */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target byte */ @@ -396,9 +393,6 @@ static int mpc_read(struct mpc_i2c *i2c, int target, int i, result; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Switch to read - restart */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target address byte - this time with the read flag set */ @@ -425,9 +419,9 @@ static int mpc_read(struct mpc_i2c *i2c, int target, /* Generate txack on next to last byte */ if (i == length - 2) writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX); data[i] = readb(i2c->base + MPC_I2C_DR); } -- cgit v1.2.3-58-ga151