From 4f6627ac3ba6948a4aebec80edfd6565aec3a40c Mon Sep 17 00:00:00 2001 From: Rui Sousa Date: Sat, 15 Sep 2007 00:56:19 +0100 Subject: [ARM] 4568/1: fix l2x0 cache invalidate handling of unaligned addresses The l2x0_inv_range() function doesn't handle unaligned addresses correctly. It's necessary to clean the cache lines that are at the start and end of the invalidate range, if the addresses are not aligned, to prevent corruption of other data sharing the same cache line. Signed-off-by: Rui Sousa Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b4e9b734e0bd..76b800a95191 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -57,7 +57,17 @@ static void l2x0_inv_range(unsigned long start, unsigned long end) { unsigned long addr; - start &= ~(CACHE_LINE_SIZE - 1); + if (start & (CACHE_LINE_SIZE - 1)) { + start &= ~(CACHE_LINE_SIZE - 1); + sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1); + start += CACHE_LINE_SIZE; + } + + if (end & (CACHE_LINE_SIZE - 1)) { + end &= ~(CACHE_LINE_SIZE - 1); + sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1); + } + for (addr = start; addr < end; addr += CACHE_LINE_SIZE) sync_writel(addr, L2X0_INV_LINE_PA, 1); cache_sync(); -- cgit v1.2.3-58-ga151 From a21101c46ca5b4320e31408853cdcbf7cb1ce4ed Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 14 Sep 2007 11:46:22 +0800 Subject: ACPI: video: _DOS=0 by default to prevent hotkey hang In the past, the Linux/ACPI video driver invoked _DOS (Display Output Switch) with the parameter 1 to tell the BIOS to switch the video output display for us. But this conflicts with Linux native graphics drivers, and can cause all sorts of issues, including hanging the system. http://bugzilla.kernel.org/show_bug.cgi?id=6001 Here we change the Linux default to evaluate _DOS=0, which tells the BIOS to simply send us a hotkey event and not touch the graphics hardware. The acpi video driver sends the display switch hotkey event up through the intput layer, and X can interpret that and use its native graphics driver to switch the display. For the case where Linux has no native graphics driver running, or the graphics driver doesn't know how to switch video and the BIOS (safely) does, the previous behaviour can be restored with: # echo 1 > /proc/acpi/video/*/DOS Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 3c9bb85a6a93..6cb3e7b12145 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1754,7 +1754,7 @@ static int acpi_video_bus_put_devices(struct acpi_video_bus *video) static int acpi_video_bus_start_devices(struct acpi_video_bus *video) { - return acpi_video_bus_DOS(video, 1, 0); + return acpi_video_bus_DOS(video, 0, 0); } static int acpi_video_bus_stop_devices(struct acpi_video_bus *video) -- cgit v1.2.3-58-ga151 From 7f10cc4e838c2b2d7272031954c56c407569d497 Mon Sep 17 00:00:00 2001 From: Maik Broemme Date: Fri, 14 Sep 2007 22:12:34 +0200 Subject: ACPI: video: remove dmesg spam i am actually heavily using the ACPI video extension for my Thinkpad X61 Tablet. I have bound the input events triggered by the brightness up/down keys to a simple echo > /sys/class/backlight/acpi_video1/brightness but everytime the event is triggered and acpi_video_device_lcd_set_level() is called i got a notificication in my kernel log like: set_level status: 0 set_level status: 0 set_level status: 0 set_level status: 0 ... Signed-off-by: Maik Broemme Signed-off-by: Len Brown --- drivers/acpi/video.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6cb3e7b12145..d05891f16282 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -417,7 +417,6 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) arg0.integer.value = level; status = acpi_evaluate_object(device->dev->handle, "_BCM", &args, NULL); - printk(KERN_DEBUG "set_level status: %x\n", status); return status; } -- cgit v1.2.3-58-ga151 From 65d916d95314566f426cc40ff0f17b754a773b0b Mon Sep 17 00:00:00 2001 From: Edward Hsu Date: Fri, 17 Aug 2007 10:14:36 +0200 Subject: r8169: correct phy parameters for the 8110SC The phys of the 8110SC (RTL_GIGA_MAC_VER_{05/06}) act abnormally in gigabit mode if they are applied the parameters in rtl8169_hw_phy_config which actually aim the 8110S/SB. It is ok to return early from rtl8169_hw_phy_config as it does not apply to the 8101 and 8168 families. Signed-off-by: Edward Hsu Signed-off-by: Francois Romieu --- drivers/net/r8169.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b85ab4a8f2a3..d9bb51bb4b9d 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1228,7 +1228,10 @@ static void rtl8169_hw_phy_config(struct net_device *dev) return; } - /* phy config for RTL8169s mac_version C chip */ + if ((tp->mac_version != RTL_GIGA_MAC_VER_02) && + (tp->mac_version != RTL_GIGA_MAC_VER_03)) + return; + mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1 mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000 mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7 -- cgit v1.2.3-58-ga151 From d78ae2dcc2acebb9a1048278f47f762c069db75c Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Sun, 26 Aug 2007 20:08:19 +0200 Subject: r8169: workaround against ignored TxPoll writes (8168) The 8168 ignores the requests to fetch the Tx descriptors when the relevant TxPoll bit is already set. It easily kills the performances of the 8168. David Gundersen has noticed that it is enough to wait for the completion of the DMA transfer (NPQ bit is cleared) before writing the TxPoll register again. The extra IO traffic added by the proposed workaround could be minimalized but it is not a high-priority task. Fix for: http://bugzilla.kernel.org/show_bug.cgi?id=7924 http://bugzilla.kernel.org/show_bug.cgi?id=8688 (http://bugzilla.kernel.org/show_bug.cgi?id=7555 ?) Signed-off-by: Francois Romieu Cc: David Gundersen Cc: Edward Hsu --- drivers/net/r8169.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index d9bb51bb4b9d..c921ec32c232 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2570,6 +2570,15 @@ static void rtl8169_tx_interrupt(struct net_device *dev, (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) { netif_wake_queue(dev); } + /* + * 8168 hack: TxPoll requests are lost when the Tx packets are + * too close. Let's kick an extra TxPoll request when a burst + * of start_xmit activity is detected (if it is not detected, + * it is slow enough). -- FR + */ + smp_rmb(); + if (tp->cur_tx != dirty_tx) + RTL_W8(TxPoll, NPQ); } } -- cgit v1.2.3-58-ga151 From a07bc1ffaeee9f05490193f66915ac086c6ea5c9 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Fri, 14 Sep 2007 00:40:14 +0200 Subject: myri10ge: Add support for PCI device id 9 Add support for new Myri-10G boards with PCI device id 9. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 1c42266bf889..556962f9612d 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3094,9 +3094,12 @@ static void myri10ge_remove(struct pci_dev *pdev) } #define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008 +#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009 static struct pci_device_id myri10ge_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)}, + {PCI_DEVICE + (PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)}, {0}, }; -- cgit v1.2.3-58-ga151 From 1799e35d5baab6e06168b46cc78b968e728ea3d1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 19 Sep 2007 23:34:46 +0200 Subject: sched: add /proc/sys/kernel/sched_compat_yield add /proc/sys/kernel/sched_compat_yield to make sys_sched_yield() more agressive, by moving the yielding task to the last position in the rbtree. with sched_compat_yield=0: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2539 mingo 20 0 1576 252 204 R 50 0.0 0:02.03 loop_yield 2541 mingo 20 0 1576 244 196 R 50 0.0 0:02.05 loop with sched_compat_yield=1: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2584 mingo 20 0 1576 248 196 R 99 0.0 0:52.45 loop 2582 mingo 20 0 1576 256 204 R 0 0.0 0:00.00 loop_yield Signed-off-by: Ingo Molnar Signed-off-by: Peter Zijlstra --- include/linux/sched.h | 1 + kernel/sched.c | 5 +--- kernel/sched_fair.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++----- kernel/sysctl.c | 8 +++++++ 4 files changed, 67 insertions(+), 10 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 5445eaec6908..3de79016f2a6 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1406,6 +1406,7 @@ extern unsigned int sysctl_sched_wakeup_granularity; extern unsigned int sysctl_sched_batch_wakeup_granularity; extern unsigned int sysctl_sched_stat_granularity; extern unsigned int sysctl_sched_runtime_limit; +extern unsigned int sysctl_sched_compat_yield; extern unsigned int sysctl_sched_child_runs_first; extern unsigned int sysctl_sched_features; diff --git a/kernel/sched.c b/kernel/sched.c index deeb1f8e0c30..63e0971c8fbb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4550,10 +4550,7 @@ asmlinkage long sys_sched_yield(void) struct rq *rq = this_rq_lock(); schedstat_inc(rq, yld_cnt); - if (unlikely(rq->nr_running == 1)) - schedstat_inc(rq, yld_act_empty); - else - current->sched_class->yield_task(rq, current); + current->sched_class->yield_task(rq, current); /* * Since we are going to call schedule() anyway, there's diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 892616bf2c77..c9fbe8e73a45 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -42,6 +42,14 @@ unsigned int sysctl_sched_latency __read_mostly = 20000000ULL; */ unsigned int sysctl_sched_min_granularity __read_mostly = 2000000ULL; +/* + * sys_sched_yield() compat mode + * + * This option switches the agressive yield implementation of the + * old scheduler back on. + */ +unsigned int __read_mostly sysctl_sched_compat_yield; + /* * SCHED_BATCH wake-up granularity. * (default: 25 msec, units: nanoseconds) @@ -897,19 +905,62 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int sleep) } /* - * sched_yield() support is very simple - we dequeue and enqueue + * sched_yield() support is very simple - we dequeue and enqueue. + * + * If compat_yield is turned on then we requeue to the end of the tree. */ static void yield_task_fair(struct rq *rq, struct task_struct *p) { struct cfs_rq *cfs_rq = task_cfs_rq(p); + struct rb_node **link = &cfs_rq->tasks_timeline.rb_node; + struct sched_entity *rightmost, *se = &p->se; + struct rb_node *parent; - __update_rq_clock(rq); /* - * Dequeue and enqueue the task to update its - * position within the tree: + * Are we the only task in the tree? + */ + if (unlikely(cfs_rq->nr_running == 1)) + return; + + if (likely(!sysctl_sched_compat_yield)) { + __update_rq_clock(rq); + /* + * Dequeue and enqueue the task to update its + * position within the tree: + */ + dequeue_entity(cfs_rq, &p->se, 0); + enqueue_entity(cfs_rq, &p->se, 0); + + return; + } + /* + * Find the rightmost entry in the rbtree: */ - dequeue_entity(cfs_rq, &p->se, 0); - enqueue_entity(cfs_rq, &p->se, 0); + do { + parent = *link; + link = &parent->rb_right; + } while (*link); + + rightmost = rb_entry(parent, struct sched_entity, run_node); + /* + * Already in the rightmost position? + */ + if (unlikely(rightmost == se)) + return; + + /* + * Minimally necessary key value to be last in the tree: + */ + se->fair_key = rightmost->fair_key + 1; + + if (cfs_rq->rb_leftmost == &se->run_node) + cfs_rq->rb_leftmost = rb_next(&se->run_node); + /* + * Relink the task to the rightmost position: + */ + rb_erase(&se->run_node, &cfs_rq->tasks_timeline); + rb_link_node(&se->run_node, parent, link); + rb_insert_color(&se->run_node, &cfs_rq->tasks_timeline); } /* diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 6ace893c17c9..53a456ebf6d5 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -303,6 +303,14 @@ static ctl_table kern_table[] = { .proc_handler = &proc_dointvec, }, #endif + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sched_compat_yield", + .data = &sysctl_sched_compat_yield, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, #ifdef CONFIG_PROVE_LOCKING { .ctl_name = CTL_UNNUMBERED, -- cgit v1.2.3-58-ga151 From 9c95e7319ba98585ebb6d304eca2d56f401ed70c Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Wed, 19 Sep 2007 23:34:46 +0200 Subject: sched: fix invalid sched_class use When using rt_mutex, a NULL pointer dereference is occurred at enqueue_task_rt. Here is a scenario; 1) there are two threads, the thread A is fair_sched_class and thread B is rt_sched_class. 2) Thread A is boosted up to rt_sched_class, because the thread A has a rt_mutex lock and the thread B is waiting the lock. 3) At this time, when thread A create a new thread C, the thread C has a rt_sched_class. 4) When doing wake_up_new_task() for the thread C, the priority of the thread C is out of the RT priority range, because the normal priority of thread A is not the RT priority. It makes data corruption by overflowing the rt_prio_array. The new thread C should be fair_sched_class. The new thread should be valid scheduler class before queuing. This patch fixes to set the suitable scheduler class. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar Signed-off-by: Peter Zijlstra --- kernel/sched.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 63e0971c8fbb..6107a0cd6325 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1682,6 +1682,11 @@ void fastcall wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->prio = effective_prio(p); + if (rt_prio(p->prio)) + p->sched_class = &rt_sched_class; + else + p->sched_class = &fair_sched_class; + if (!p->sched_class->task_new || !sysctl_sched_child_runs_first || (clone_flags & CLONE_VM) || task_cpu(p) != this_cpu || !current->se.on_rq) { -- cgit v1.2.3-58-ga151 From 31e879309474d1666d645b96de99d0b682fa055f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 19 Sep 2007 17:19:12 -0400 Subject: SELinux: fix array out of bounds when mounting with selinux options Given an illegal selinux option it was possible for match_token to work in random memory at the end of the match_table_t array. Note that privilege is required to perform a context mount, so this issue is effectively limited to root only. Signed-off-by: Eric Paris Acked-by: Stephen Smalley Signed-off-by: James Morris --- security/selinux/hooks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 36946629b6ca..0753b20e23fe 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -316,6 +316,7 @@ static inline int inode_doinit(struct inode *inode) } enum { + Opt_error = -1, Opt_context = 1, Opt_fscontext = 2, Opt_defcontext = 4, @@ -327,6 +328,7 @@ static match_table_t tokens = { {Opt_fscontext, "fscontext=%s"}, {Opt_defcontext, "defcontext=%s"}, {Opt_rootcontext, "rootcontext=%s"}, + {Opt_error, NULL}, }; #define SEL_MOUNT_FAIL_MSG "SELinux: duplicate or incompatible mount options\n" -- cgit v1.2.3-58-ga151 From 81cfe79b9c577139a873483654640eb3f6e78c39 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Sep 2007 16:01:13 -0700 Subject: Linux 2.6.23-rc7 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index e0fdf499ef20..c265e41ec55a 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 23 -EXTRAVERSION =-rc6 -NAME = Pink Farting Weasel +EXTRAVERSION =-rc7 +NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v1.2.3-58-ga151 From 680e9fe9d69ea86e81c859932bfd751be91cc0e0 Mon Sep 17 00:00:00 2001 From: Domen Puncer Date: Mon, 17 Sep 2007 22:21:40 +0200 Subject: phy: export phy_mii_ioctl Export phy_mii_ioctl, so network drivers can use it when built as modules too. Signed-off-by: Domen Puncer Signed-off-by: Jeff Garzik --- drivers/net/phy/phy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0cc4369cacba..cb230f44d6fc 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -409,6 +409,7 @@ int phy_mii_ioctl(struct phy_device *phydev, return 0; } +EXPORT_SYMBOL(phy_mii_ioctl); /** * phy_start_aneg - start auto-negotiation for this PHY device -- cgit v1.2.3-58-ga151 From 8742bc92c36324ac4bac739ab413acc6630a875d Mon Sep 17 00:00:00 2001 From: Herbert Valerio Riedel Date: Sun, 16 Sep 2007 16:44:39 +0100 Subject: [ARM] 4569/1: ep93xx_gpio_irq_type(): fix spurious enumeration offset for FGPIO handling The EP93XX_GPIO_LINE_F() macro is supposed to be called with a line number between 0 and 7, but the current code causes it to get called with an spuriously offset number range {16..23}. Signed-off-by: Herbert Valerio Riedel Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 851cc7158ca3..70b2c7801110 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -336,7 +336,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) if (line >= 0 && line < 16) { gpio_line_config(line, GPIO_IN); } else { - gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN); + gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN); } port = line >> 3; -- cgit v1.2.3-58-ga151 From bcc7b445eff295664a3a3ab14e742b3c9d88e6e3 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 30 Aug 2007 17:21:38 +1000 Subject: [XFS] fix filestreams on 32-bit boxes xfs_filestream_mount() sets up an mru cache with: err = xfs_mru_cache_create(&mp->m_filestream, lifetime, grp_count, (xfs_mru_cache_free_func_t)xfs_fstrm_free_func); but that cast is causing problems... typedef void (*xfs_mru_cache_free_func_t)(unsigned long, void*); but: void xfs_fstrm_free_func( xfs_ino_t ino, fstrm_item_t *item) so on a 32-bit box, it's casting (32, 32) args into (64, 32) and I assume it's getting garbage for *item, which subsequently causes an explosion. With this change the filestreams xfsqa tests don't oops on my 32-bit box. SGI-PV: 967795 SGI-Modid: xfs-linux-melb:xfs-kern:29510a Signed-off-by: Eric Sandeen Signed-off-by: David Chinner Signed-off-by: Tim Shimmin --- fs/xfs/xfs_filestream.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c index 16f8e175167d..36d8f6aa11af 100644 --- a/fs/xfs/xfs_filestream.c +++ b/fs/xfs/xfs_filestream.c @@ -350,9 +350,10 @@ _xfs_filestream_update_ag( /* xfs_fstrm_free_func(): callback for freeing cached stream items. */ void xfs_fstrm_free_func( - xfs_ino_t ino, - fstrm_item_t *item) + unsigned long ino, + void *data) { + fstrm_item_t *item = (fstrm_item_t *)data; xfs_inode_t *ip = item->ip; int ref; @@ -438,7 +439,7 @@ xfs_filestream_mount( grp_count = 10; err = xfs_mru_cache_create(&mp->m_filestream, lifetime, grp_count, - (xfs_mru_cache_free_func_t)xfs_fstrm_free_func); + xfs_fstrm_free_func); return err; } -- cgit v1.2.3-58-ga151 From 1bc5858d0d40e07697b5eda47ed8628b8a934235 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 19 Sep 2007 15:27:30 +1000 Subject: [XFS] fix valid but harmless sparse warning The new xlog_recover_do_reg_buffer checks call be16_to_cpu on di_gen which is a 32bit value so sparse rightly complains. Fortunately the warning is harmless because we don't care for the value, but only whether it's non-NULL. Due to that fact we can simply kill the endian swaps on this and the previous di_mode check entirely. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29709a Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy Signed-off-by: Tim Shimmin --- fs/xfs/xfs_log_recover.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index dacb19739cc2..7174991f4bef 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1920,9 +1920,9 @@ xlog_recover_do_reg_buffer( stale_buf = 1; break; } - if (be16_to_cpu(dip->di_core.di_mode)) + if (dip->di_core.di_mode) mode_count++; - if (be16_to_cpu(dip->di_core.di_gen)) + if (dip->di_core.di_gen) gen_count++; } -- cgit v1.2.3-58-ga151 From 3f662b3f6e422a15fefcbaf4bdd21f97e6bcf32d Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 13 Sep 2007 14:14:29 -0700 Subject: [x86 setup] Present the canonical video mode number to the kernel Canonicalize the video mode number as presented to the kernel. The video mode number may be user-entered (e.g. ASK_VGA), an alias (e.g. NORMAL_VGA), or a size specification, and that confuses the suspend wakeup code. Signed-off-by: H. Peter Anvin --- arch/i386/boot/video.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/i386/boot/video.c b/arch/i386/boot/video.c index 693f20d3102e..e4ba897bf9a3 100644 --- a/arch/i386/boot/video.c +++ b/arch/i386/boot/video.c @@ -147,7 +147,7 @@ int mode_defined(u16 mode) } /* Set mode (without recalc) */ -static int raw_set_mode(u16 mode) +static int raw_set_mode(u16 mode, u16 *real_mode) { int nmode, i; struct card_info *card; @@ -165,8 +165,10 @@ static int raw_set_mode(u16 mode) if ((mode == nmode && visible) || mode == mi->mode || - mode == (mi->y << 8)+mi->x) + mode == (mi->y << 8)+mi->x) { + *real_mode = mi->mode; return card->set_mode(mi); + } if (visible) nmode++; @@ -178,7 +180,7 @@ static int raw_set_mode(u16 mode) if (mode >= card->xmode_first && mode < card->xmode_first+card->xmode_n) { struct mode_info mix; - mix.mode = mode; + *real_mode = mix.mode = mode; mix.x = mix.y = 0; return card->set_mode(&mix); } @@ -223,6 +225,7 @@ static void vga_recalc_vertical(void) static int set_mode(u16 mode) { int rv; + u16 real_mode; /* Very special mode numbers... */ if (mode == VIDEO_CURRENT_MODE) @@ -232,13 +235,16 @@ static int set_mode(u16 mode) else if (mode == EXTENDED_VGA) mode = VIDEO_8POINT; - rv = raw_set_mode(mode); + rv = raw_set_mode(mode, &real_mode); if (rv) return rv; if (mode & VIDEO_RECALC) vga_recalc_vertical(); + /* Save the canonical mode number for the kernel, not + an alias, size specification or menu position */ + boot_params.hdr.vid_mode = real_mode; return 0; } -- cgit v1.2.3-58-ga151 From 91c4b8cb5ab8cc3e8352739e35699c0487a6b6f3 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 13 Sep 2007 14:16:37 -0700 Subject: [acpi] Correct the decoding of video mode numbers in wakeup.S wakeup.S looks at the video mode number from the setup header and looks to see if it is a VESA mode. Unfortunately, the decoding is done incorrectly and it will attempt to frob the VESA BIOS for any mode number 0x0200 or larger. Correct this, and remove a bunch of #if 0'd code. Massive thanks to Jeff Chua for reporting the bug, and suffering though a large number of experiments in order to track this problem down. Cc: Pavel Machek Signed-off-by: H. Peter Anvin --- arch/i386/kernel/acpi/wakeup.S | 41 +++++++++-------------------------- arch/x86_64/kernel/acpi/wakeup.S | 47 +++++++++++----------------------------- 2 files changed, 23 insertions(+), 65 deletions(-) diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S index ed0a0f2c1597..f22ba8534d26 100644 --- a/arch/i386/kernel/acpi/wakeup.S +++ b/arch/i386/kernel/acpi/wakeup.S @@ -151,51 +151,30 @@ bogus_real_magic: #define VIDEO_FIRST_V7 0x0900 # Setting of user mode (AX=mode ID) => CF=success + +# For now, we only handle VESA modes (0x0200..0x03ff). To handle other +# modes, we should probably compile in the video code from the boot +# directory. mode_set: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif - - cmpb $VIDEO_FIRST_VESA>>8, %ah - jnc check_vesa -#if 0 - orb %ah, %ah - jz setmenu -#endif - - decb %ah -# jz setbios Add bios modes later + subb $VIDEO_FIRST_VESA>>8, %bh + cmpb $2, %bh + jb check_vesa -setbad: clc +setbad: + clc ret check_vesa: - subb $VIDEO_FIRST_VESA>>8, %bh orw $0x4000, %bx # Use linear frame buffer movw $0x4f02, %ax # VESA BIOS mode set call int $0x10 cmpw $0x004f, %ax # AL=4f if implemented - jnz _setbad # AH=0 if OK + jnz setbad # AH=0 if OK stc ret -_setbad: jmp setbad - .code32 ALIGN diff --git a/arch/x86_64/kernel/acpi/wakeup.S b/arch/x86_64/kernel/acpi/wakeup.S index 13f1480cbec9..a06f2bcabef9 100644 --- a/arch/x86_64/kernel/acpi/wakeup.S +++ b/arch/x86_64/kernel/acpi/wakeup.S @@ -81,7 +81,7 @@ wakeup_code: testl $2, realmode_flags - wakeup_code jz 1f mov video_mode - wakeup_code, %ax - call mode_seta + call mode_set 1: movw $0xb800, %ax @@ -291,52 +291,31 @@ no_longmode: #define VIDEO_FIRST_V7 0x0900 # Setting of user mode (AX=mode ID) => CF=success + +# For now, we only handle VESA modes (0x0200..0x03ff). To handle other +# modes, we should probably compile in the video code from the boot +# directory. .code16 -mode_seta: +mode_set: movw %ax, %bx -#if 0 - cmpb $0xff, %ah - jz setalias - - testb $VIDEO_RECALC>>8, %ah - jnz _setrec - - cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah - jnc setres - - cmpb $VIDEO_FIRST_SPECIAL>>8, %ah - jz setspc - - cmpb $VIDEO_FIRST_V7>>8, %ah - jz setv7 -#endif - - cmpb $VIDEO_FIRST_VESA>>8, %ah - jnc check_vesaa -#if 0 - orb %ah, %ah - jz setmenu -#endif - - decb %ah -# jz setbios Add bios modes later + subb $VIDEO_FIRST_VESA>>8, %bh + cmpb $2, %bh + jb check_vesa -setbada: clc +setbad: + clc ret -check_vesaa: - subb $VIDEO_FIRST_VESA>>8, %bh +check_vesa: orw $0x4000, %bx # Use linear frame buffer movw $0x4f02, %ax # VESA BIOS mode set call int $0x10 cmpw $0x004f, %ax # AL=4f if implemented - jnz _setbada # AH=0 if OK + jnz setbad # AH=0 if OK stc ret -_setbada: jmp setbada - wakeup_stack_begin: # Stack grows down .org 0xff0 -- cgit v1.2.3-58-ga151 From bbc15f46fe4dc2862325e2b4ba474a854162e1a1 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Mon, 10 Sep 2007 23:39:02 +0200 Subject: [x86 setup] Fix typo in arch/i386/boot/header.S There's an obvious typo in arch/i386/boot/header.S (in your linux-2.6-x86setup.git) that I noticed by just studying the code. Signed-off-by: Paul Bolle Signed-off-by: H. Peter Anvin --- arch/i386/boot/header.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/i386/boot/header.S b/arch/i386/boot/header.S index 7f4a2c53bd76..f3140e596d40 100644 --- a/arch/i386/boot/header.S +++ b/arch/i386/boot/header.S @@ -275,7 +275,7 @@ die: hlt jmp die - .size die, .-due + .size die, .-die .section ".initdata", "a" setup_corrupt: -- cgit v1.2.3-58-ga151 From 6d0b842d3bf0cc027dcff57a89fb8a6b1fd610e1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 20 Sep 2007 11:33:45 -0700 Subject: Fix CRLF line endings in Documentation/input/iforce-protocol.txt Emil Medve points out that this documentation file uses CRLF line endings, which means that if you use [core] autocrlf=input (which makes sense if you ever develop under Windows, for example, or if you use other broken tools) in your git config, git will always complain about the file being dirty. This removes the bogus DOS line endings, and removes whitespace at the end of line. Cc: Emil Medve Signed-off-by: Linus Torvalds --- Documentation/input/iforce-protocol.txt | 508 ++++++++++++++++---------------- 1 file changed, 254 insertions(+), 254 deletions(-) diff --git a/Documentation/input/iforce-protocol.txt b/Documentation/input/iforce-protocol.txt index 95df4ca70e71..8777d2d321e3 100644 --- a/Documentation/input/iforce-protocol.txt +++ b/Documentation/input/iforce-protocol.txt @@ -1,254 +1,254 @@ -** Introduction -This document describes what I managed to discover about the protocol used to -specify force effects to I-Force 2.0 devices. None of this information comes -from Immerse. That's why you should not trust what is written in this -document. This document is intended to help understanding the protocol. -This is not a reference. Comments and corrections are welcome. To contact me, -send an email to: deneux@ifrance.com - -** WARNING ** -I may not be held responsible for any dammage or harm caused if you try to -send data to your I-Force device based on what you read in this document. - -** Preliminary Notes: -All values are hexadecimal with big-endian encoding (msb on the left). Beware, -values inside packets are encoded using little-endian. Bytes whose roles are -unknown are marked ??? Information that needs deeper inspection is marked (?) - -** General form of a packet ** -This is how packets look when the device uses the rs232 to communicate. -2B OP LEN DATA CS -CS is the checksum. It is equal to the exclusive or of all bytes. - -When using USB: -OP DATA -The 2B, LEN and CS fields have disappeared, probably because USB handles frames and -data corruption is handled or unsignificant. - -First, I describe effects that are sent by the device to the computer - -** Device input state -This packet is used to indicate the state of each button and the value of each -axis -OP= 01 for a joystick, 03 for a wheel -LEN= Varies from device to device -00 X-Axis lsb -01 X-Axis msb -02 Y-Axis lsb, or gas pedal for a wheel -03 Y-Axis msb, or brake pedal for a wheel -04 Throttle -05 Buttons -06 Lower 4 bits: Buttons - Upper 4 bits: Hat -07 Rudder - -** Device effects states -OP= 02 -LEN= Varies -00 ? Bit 1 (Value 2) is the value of the deadman switch -01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id. -02 ?? -03 Address of parameter block changed (lsb) -04 Address of parameter block changed (msb) -05 Address of second parameter block changed (lsb) -... depending on the number of parameter blocks updated - -** Force effect ** -OP= 01 -LEN= 0e -00 Channel (when playing several effects at the same time, each must be assigned a channel) -01 Wave form - Val 00 Constant - Val 20 Square - Val 21 Triangle - Val 22 Sine - Val 23 Sawtooth up - Val 24 Sawtooth down - Val 40 Spring (Force = f(pos)) - Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration)) - - -02 Axes affected and trigger - Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction - Val 4 = X axis only. Byte 05 must contain 5a - Val 8 = Y axis only. Byte 05 must contain b4 - Val c = X and Y axes. Bytes 05 must contain 60 - Bits 0-3: Val 0 = No trigger - Val x+1 = Button x triggers the effect - When the whole byte is 0, cancel the previously set trigger - -03-04 Duration of effect (little endian encoding, in ms) - -05 Direction of effect, if applicable. Else, see 02 for value to assign. - -06-07 Minimum time between triggering. - -08-09 Address of periodicity or magnitude parameters -0a-0b Address of attack and fade parameters, or ffff if none. -*or* -08-09 Address of interactive parameters for X-axis, or ffff if not applicable -0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable - -0c-0d Delay before execution of effect (little endian encoding, in ms) - - -** Time based parameters ** - -*** Attack and fade *** -OP= 02 -LEN= 08 -00-01 Address where to store the parameteres -02-03 Duration of attack (little endian encoding, in ms) -04 Level at end of attack. Signed byte. -05-06 Duration of fade. -07 Level at end of fade. - -*** Magnitude *** -OP= 03 -LEN= 03 -00-01 Address -02 Level. Signed byte. - -*** Periodicity *** -OP= 04 -LEN= 07 -00-01 Address -02 Magnitude. Signed byte. -03 Offset. Signed byte. -04 Phase. Val 00 = 0 deg, Val 40 = 90 degs. -05-06 Period (little endian encoding, in ms) - -** Interactive parameters ** -OP= 05 -LEN= 0a -00-01 Address -02 Positive Coeff -03 Negative Coeff -04+05 Offset (center) -06+07 Dead band (Val 01F4 = 5000 (decimal)) -08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal)) -09 Negative saturation - -The encoding is a bit funny here: For coeffs, these are signed values. The -maximum value is 64 (100 decimal), the min is 9c. -For the offset, the minimum value is FE0C, the maximum value is 01F4. -For the deadband, the minimum value is 0, the max is 03E8. - -** Controls ** -OP= 41 -LEN= 03 -00 Channel -01 Start/Stop - Val 00: Stop - Val 01: Start and play once. - Val 41: Start and play n times (See byte 02 below) -02 Number of iterations n. - -** Init ** - -*** Querying features *** -OP= ff -Query command. Length varies according to the query type. -The general format of this packet is: -ff 01 QUERY [INDEX] CHECKSUM -reponses are of the same form: -FF LEN QUERY VALUE_QUERIED CHECKSUM2 -where LEN = 1 + length(VALUE_QUERIED) - -**** Query ram size **** -QUERY = 42 ('B'uffer size) -The device should reply with the same packet plus two additionnal bytes -containing the size of the memory: -ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available. - -**** Query number of effects **** -QUERY = 4e ('N'umber of effects) -The device should respond by sending the number of effects that can be played -at the same time (one byte) -ff 02 4e 14 CS would stand for 20 effects. - -**** Vendor's id **** -QUERY = 4d ('M'anufacturer) -Query the vendors'id (2 bytes) - -**** Product id ***** -QUERY = 50 ('P'roduct) -Query the product id (2 bytes) - -**** Open device **** -QUERY = 4f ('O'pen) -No data returned. - -**** Close device ***** -QUERY = 43 ('C')lose -No data returned. - -**** Query effect **** -QUERY = 45 ('E') -Send effect type. -Returns nonzero if supported (2 bytes) - -**** Firmware Version **** -QUERY = 56 ('V'ersion) -Sends back 3 bytes - major, minor, subminor - -*** Initialisation of the device *** - -**** Set Control **** -!!! Device dependent, can be different on different models !!! -OP= 40 [] -LEN= 2 or 3 -00 Idx - Idx 00 Set dead zone (0..2048) - Idx 01 Ignore Deadman sensor (0..1) - Idx 02 Enable comm watchdog (0..1) - Idx 03 Set the strength of the spring (0..100) - Idx 04 Enable or disable the spring (0/1) - Idx 05 Set axis saturation threshold (0..2048) - -**** Set Effect State **** -OP= 42 -LEN= 1 -00 State - Bit 3 Pause force feedback - Bit 2 Enable force feedback - Bit 0 Stop all effects - -**** Set overall gain **** -OP= 43 -LEN= 1 -00 Gain - Val 00 = 0% - Val 40 = 50% - Val 80 = 100% - -** Parameter memory ** - -Each device has a certain amount of memory to store parameters of effects. -The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below -is the amount of memory apparently needed for every set of parameters: - - period : 0c - - magnitude : 02 - - attack and fade : 0e - - interactive : 08 - -** Appendix: How to study the protocol ? ** - -1. Generate effects using the force editor provided with the DirectX SDK, or use Immersion Studio (freely available at their web site in the developer section: www.immersion.com) -2. Start a soft spying RS232 or USB (depending on where you connected your joystick/wheel). I used ComPortSpy from fCoder (alpha version!) -3. Play the effect, and watch what happens on the spy screen. - -A few words about ComPortSpy: -At first glance, this soft seems, hum, well... buggy. In fact, data appear with a few seconds latency. Personnaly, I restart it every time I play an effect. -Remember it's free (as in free beer) and alpha! - -** URLS ** -Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy. - -** Author of this document ** -Johann Deneux -Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/ - -Additions by Vojtech Pavlik. - -I-Force is trademark of Immersion Corp. +** Introduction +This document describes what I managed to discover about the protocol used to +specify force effects to I-Force 2.0 devices. None of this information comes +from Immerse. That's why you should not trust what is written in this +document. This document is intended to help understanding the protocol. +This is not a reference. Comments and corrections are welcome. To contact me, +send an email to: deneux@ifrance.com + +** WARNING ** +I may not be held responsible for any dammage or harm caused if you try to +send data to your I-Force device based on what you read in this document. + +** Preliminary Notes: +All values are hexadecimal with big-endian encoding (msb on the left). Beware, +values inside packets are encoded using little-endian. Bytes whose roles are +unknown are marked ??? Information that needs deeper inspection is marked (?) + +** General form of a packet ** +This is how packets look when the device uses the rs232 to communicate. +2B OP LEN DATA CS +CS is the checksum. It is equal to the exclusive or of all bytes. + +When using USB: +OP DATA +The 2B, LEN and CS fields have disappeared, probably because USB handles frames and +data corruption is handled or unsignificant. + +First, I describe effects that are sent by the device to the computer + +** Device input state +This packet is used to indicate the state of each button and the value of each +axis +OP= 01 for a joystick, 03 for a wheel +LEN= Varies from device to device +00 X-Axis lsb +01 X-Axis msb +02 Y-Axis lsb, or gas pedal for a wheel +03 Y-Axis msb, or brake pedal for a wheel +04 Throttle +05 Buttons +06 Lower 4 bits: Buttons + Upper 4 bits: Hat +07 Rudder + +** Device effects states +OP= 02 +LEN= Varies +00 ? Bit 1 (Value 2) is the value of the deadman switch +01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id. +02 ?? +03 Address of parameter block changed (lsb) +04 Address of parameter block changed (msb) +05 Address of second parameter block changed (lsb) +... depending on the number of parameter blocks updated + +** Force effect ** +OP= 01 +LEN= 0e +00 Channel (when playing several effects at the same time, each must be assigned a channel) +01 Wave form + Val 00 Constant + Val 20 Square + Val 21 Triangle + Val 22 Sine + Val 23 Sawtooth up + Val 24 Sawtooth down + Val 40 Spring (Force = f(pos)) + Val 41 Friction (Force = f(velocity)) and Inertia (Force = f(acceleration)) + + +02 Axes affected and trigger + Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction + Val 4 = X axis only. Byte 05 must contain 5a + Val 8 = Y axis only. Byte 05 must contain b4 + Val c = X and Y axes. Bytes 05 must contain 60 + Bits 0-3: Val 0 = No trigger + Val x+1 = Button x triggers the effect + When the whole byte is 0, cancel the previously set trigger + +03-04 Duration of effect (little endian encoding, in ms) + +05 Direction of effect, if applicable. Else, see 02 for value to assign. + +06-07 Minimum time between triggering. + +08-09 Address of periodicity or magnitude parameters +0a-0b Address of attack and fade parameters, or ffff if none. +*or* +08-09 Address of interactive parameters for X-axis, or ffff if not applicable +0a-0b Address of interactive parameters for Y-axis, or ffff if not applicable + +0c-0d Delay before execution of effect (little endian encoding, in ms) + + +** Time based parameters ** + +*** Attack and fade *** +OP= 02 +LEN= 08 +00-01 Address where to store the parameteres +02-03 Duration of attack (little endian encoding, in ms) +04 Level at end of attack. Signed byte. +05-06 Duration of fade. +07 Level at end of fade. + +*** Magnitude *** +OP= 03 +LEN= 03 +00-01 Address +02 Level. Signed byte. + +*** Periodicity *** +OP= 04 +LEN= 07 +00-01 Address +02 Magnitude. Signed byte. +03 Offset. Signed byte. +04 Phase. Val 00 = 0 deg, Val 40 = 90 degs. +05-06 Period (little endian encoding, in ms) + +** Interactive parameters ** +OP= 05 +LEN= 0a +00-01 Address +02 Positive Coeff +03 Negative Coeff +04+05 Offset (center) +06+07 Dead band (Val 01F4 = 5000 (decimal)) +08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal)) +09 Negative saturation + +The encoding is a bit funny here: For coeffs, these are signed values. The +maximum value is 64 (100 decimal), the min is 9c. +For the offset, the minimum value is FE0C, the maximum value is 01F4. +For the deadband, the minimum value is 0, the max is 03E8. + +** Controls ** +OP= 41 +LEN= 03 +00 Channel +01 Start/Stop + Val 00: Stop + Val 01: Start and play once. + Val 41: Start and play n times (See byte 02 below) +02 Number of iterations n. + +** Init ** + +*** Querying features *** +OP= ff +Query command. Length varies according to the query type. +The general format of this packet is: +ff 01 QUERY [INDEX] CHECKSUM +reponses are of the same form: +FF LEN QUERY VALUE_QUERIED CHECKSUM2 +where LEN = 1 + length(VALUE_QUERIED) + +**** Query ram size **** +QUERY = 42 ('B'uffer size) +The device should reply with the same packet plus two additionnal bytes +containing the size of the memory: +ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available. + +**** Query number of effects **** +QUERY = 4e ('N'umber of effects) +The device should respond by sending the number of effects that can be played +at the same time (one byte) +ff 02 4e 14 CS would stand for 20 effects. + +**** Vendor's id **** +QUERY = 4d ('M'anufacturer) +Query the vendors'id (2 bytes) + +**** Product id ***** +QUERY = 50 ('P'roduct) +Query the product id (2 bytes) + +**** Open device **** +QUERY = 4f ('O'pen) +No data returned. + +**** Close device ***** +QUERY = 43 ('C')lose +No data returned. + +**** Query effect **** +QUERY = 45 ('E') +Send effect type. +Returns nonzero if supported (2 bytes) + +**** Firmware Version **** +QUERY = 56 ('V'ersion) +Sends back 3 bytes - major, minor, subminor + +*** Initialisation of the device *** + +**** Set Control **** +!!! Device dependent, can be different on different models !!! +OP= 40 [] +LEN= 2 or 3 +00 Idx + Idx 00 Set dead zone (0..2048) + Idx 01 Ignore Deadman sensor (0..1) + Idx 02 Enable comm watchdog (0..1) + Idx 03 Set the strength of the spring (0..100) + Idx 04 Enable or disable the spring (0/1) + Idx 05 Set axis saturation threshold (0..2048) + +**** Set Effect State **** +OP= 42 +LEN= 1 +00 State + Bit 3 Pause force feedback + Bit 2 Enable force feedback + Bit 0 Stop all effects + +**** Set overall gain **** +OP= 43 +LEN= 1 +00 Gain + Val 00 = 0% + Val 40 = 50% + Val 80 = 100% + +** Parameter memory ** + +Each device has a certain amount of memory to store parameters of effects. +The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below +is the amount of memory apparently needed for every set of parameters: + - period : 0c + - magnitude : 02 + - attack and fade : 0e + - interactive : 08 + +** Appendix: How to study the protocol ? ** + +1. Generate effects using the force editor provided with the DirectX SDK, or use Immersion Studio (freely available at their web site in the developer section: www.immersion.com) +2. Start a soft spying RS232 or USB (depending on where you connected your joystick/wheel). I used ComPortSpy from fCoder (alpha version!) +3. Play the effect, and watch what happens on the spy screen. + +A few words about ComPortSpy: +At first glance, this soft seems, hum, well... buggy. In fact, data appear with a few seconds latency. Personnaly, I restart it every time I play an effect. +Remember it's free (as in free beer) and alpha! + +** URLS ** +Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy. + +** Author of this document ** +Johann Deneux +Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/ + +Additions by Vojtech Pavlik. + +I-Force is trademark of Immersion Corp. -- cgit v1.2.3-58-ga151 From 29c5d4afba51c71cfeadd3f74f3c42e064483fb0 Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Tue, 18 Sep 2007 13:07:15 -0700 Subject: [NETFILTER]: nfnetlink_log: fix sending of multipart messages The following patch fixes the handling of netlink packets containing multiple messages. As exposed during netfilter workshop, nfnetlink_log was overwritten the message type of the last message (setting it to MSG_DONE) in a multipart packet. The consequence was libnfnetlink to ignore the last message in the packet. The following patch adds a supplementary message (with type MSG_DONE) af the end of the netlink skb. Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nfnetlink_log.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index e185a5b55913..2351533a8507 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -58,7 +58,6 @@ struct nfulnl_instance { unsigned int qlen; /* number of nlmsgs in skb */ struct sk_buff *skb; /* pre-allocatd skb */ - struct nlmsghdr *lastnlh; /* netlink header of last msg in skb */ struct timer_list timer; int peer_pid; /* PID of the peer process */ @@ -345,10 +344,12 @@ static struct sk_buff *nfulnl_alloc_skb(unsigned int inst_size, static int __nfulnl_send(struct nfulnl_instance *inst) { - int status; + int status = -1; if (inst->qlen > 1) - inst->lastnlh->nlmsg_type = NLMSG_DONE; + NLMSG_PUT(inst->skb, 0, 0, + NLMSG_DONE, + sizeof(struct nfgenmsg)); status = nfnetlink_unicast(inst->skb, inst->peer_pid, MSG_DONTWAIT); if (status < 0) { @@ -358,8 +359,8 @@ __nfulnl_send(struct nfulnl_instance *inst) inst->qlen = 0; inst->skb = NULL; - inst->lastnlh = NULL; +nlmsg_failure: return status; } @@ -538,7 +539,6 @@ __build_packet_message(struct nfulnl_instance *inst, } nlh->nlmsg_len = inst->skb->tail - old_tail; - inst->lastnlh = nlh; return 0; nlmsg_failure: @@ -644,7 +644,8 @@ nfulnl_log_packet(unsigned int pf, } if (inst->qlen >= qthreshold || - (inst->skb && size > skb_tailroom(inst->skb))) { + (inst->skb && size > + skb_tailroom(inst->skb) - sizeof(struct nfgenmsg))) { /* either the queue len is too high or we don't have * enough room in the skb left. flush to userspace. */ UDEBUG("flushing old skb\n"); -- cgit v1.2.3-58-ga151 From 1a03b81db96aeaac0276224f25c0701a1ba37318 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 18 Sep 2007 13:19:26 -0700 Subject: [NETFILTER]: MAINTAINERS update Update netfilter list addresses and an old email address of myself. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9c54a5ef0ba7..9a91d9e3f1f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2622,8 +2622,8 @@ P: Harald Welte P: Jozsef Kadlecsik P: Patrick McHardy M: kaber@trash.net -L: netfilter-devel@lists.netfilter.org -L: netfilter@lists.netfilter.org (subscribers-only) +L: netfilter-devel@vger.kernel.org +L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ @@ -2676,7 +2676,7 @@ M: jmorris@namei.org P: Hideaki YOSHIFUJI M: yoshfuji@linux-ipv6.org P: Patrick McHardy -M: kaber@coreworks.de +M: kaber@trash.net L: netdev@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained -- cgit v1.2.3-58-ga151 From 5588b40d7c2bff75ee573ed42d1738c73ce24492 Mon Sep 17 00:00:00 2001 From: Alexey Kuznetsov Date: Wed, 19 Sep 2007 10:42:03 -0700 Subject: [PKT_SCHED]: Fix 'SFQ qdisc crashes with limit of 2 packets' Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_sfq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 957957309859..3a23e30bc79e 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -270,7 +270,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc* sch) q->tail = x; } } - if (++sch->q.qlen < q->limit-1) { + if (++sch->q.qlen <= q->limit) { sch->bstats.bytes += skb->len; sch->bstats.packets++; return 0; @@ -306,7 +306,7 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc* sch) q->tail = x; } } - if (++sch->q.qlen < q->limit - 1) { + if (++sch->q.qlen <= q->limit) { sch->qstats.requeues++; return 0; } @@ -391,10 +391,10 @@ static int sfq_change(struct Qdisc *sch, struct rtattr *opt) q->quantum = ctl->quantum ? : psched_mtu(sch->dev); q->perturb_period = ctl->perturb_period*HZ; if (ctl->limit) - q->limit = min_t(u32, ctl->limit, SFQ_DEPTH); + q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 2); qlen = sch->q.qlen; - while (sch->q.qlen >= q->limit-1) + while (sch->q.qlen > q->limit) sfq_drop(sch); qdisc_tree_decrease_qlen(sch, qlen - sch->q.qlen); @@ -423,7 +423,7 @@ static int sfq_init(struct Qdisc *sch, struct rtattr *opt) q->dep[i+SFQ_DEPTH].next = i+SFQ_DEPTH; q->dep[i+SFQ_DEPTH].prev = i+SFQ_DEPTH; } - q->limit = SFQ_DEPTH; + q->limit = SFQ_DEPTH - 2; q->max_depth = 0; q->tail = SFQ_DEPTH; if (opt == NULL) { -- cgit v1.2.3-58-ga151 From 21d0c83302fb742b7ffb6089d40196166102f5ed Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 19 Sep 2007 10:45:02 -0700 Subject: [PPP] pppoe: Fix double-free on skb after transmit failure When I got rid of the second packet in __pppoe_xmit I created a double-free on the skb because of the goto abort on failure. This patch removes that. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 0d7f570b9a54..9b30cd600a64 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -879,8 +879,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) dev->hard_header(skb, dev, ETH_P_PPP_SES, po->pppoe_pa.remote, NULL, data_len); - if (dev_queue_xmit(skb) < 0) - goto abort; + dev_queue_xmit(skb); return 1; -- cgit v1.2.3-58-ga151 From a14d6abc947a5504e8d0f934da57b5bc4cea59ca Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 18 Sep 2007 13:18:17 -0700 Subject: [PPP] L2TP: Disallow non-UDP datagram sockets With the addition of UDP-Lite we need to refine the socket check so that only genuine UDP sockets are allowed through. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 266e8b38fe10..ed8ead432d77 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1326,12 +1326,14 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id, goto err; } + sk = sock->sk; + /* Quick sanity checks */ - err = -ESOCKTNOSUPPORT; - if (sock->type != SOCK_DGRAM) { + err = -EPROTONOSUPPORT; + if (sk->sk_protocol != IPPROTO_UDP) { PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR, - "tunl %hu: fd %d wrong type, got %d, expected %d\n", - tunnel_id, fd, sock->type, SOCK_DGRAM); + "tunl %hu: fd %d wrong protocol, got %d, expected %d\n", + tunnel_id, fd, sk->sk_protocol, IPPROTO_UDP); goto err; } err = -EAFNOSUPPORT; @@ -1343,7 +1345,6 @@ static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id, } err = -ENOTCONN; - sk = sock->sk; /* Check if this socket has already been prepped */ tunnel = (struct pppol2tp_tunnel *)sk->sk_user_data; -- cgit v1.2.3-58-ga151 From 7a70e39b6633ad85936b029463134ee2599600f1 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 18 Sep 2007 13:18:42 -0700 Subject: [PPP] L2TP: Fix skb handling in pppol2tp_recv_core The function pppol2tp_recv_core doesn't handle non-linear packets properly. It also fails to check the remote offset field. This patch fixes these problems. It also removes an unnecessary check on the UDP header which has already been performed by the UDP layer. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 44 ++++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 20 deletions(-) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index ed8ead432d77..440e190778a1 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -491,44 +491,46 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) u16 hdrflags; u16 tunnel_id, session_id; int length; - struct udphdr *uh; + int offset; tunnel = pppol2tp_sock_to_tunnel(sock); if (tunnel == NULL) goto error; + /* UDP always verifies the packet length. */ + __skb_pull(skb, sizeof(struct udphdr)); + /* Short packet? */ - if (skb->len < sizeof(struct udphdr)) { + if (!pskb_may_pull(skb, 12)) { PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO, "%s: recv short packet (len=%d)\n", tunnel->name, skb->len); goto error; } /* Point to L2TP header */ - ptr = skb->data + sizeof(struct udphdr); + ptr = skb->data; /* Get L2TP header flags */ hdrflags = ntohs(*(__be16*)ptr); /* Trace packet contents, if enabled */ if (tunnel->debug & PPPOL2TP_MSG_DATA) { + length = min(16u, skb->len); + if (!pskb_may_pull(skb, length)) + goto error; + printk(KERN_DEBUG "%s: recv: ", tunnel->name); - for (length = 0; length < 16; length++) - printk(" %02X", ptr[length]); + offset = 0; + do { + printk(" %02X", ptr[offset]); + } while (++offset < length); + printk("\n"); } /* Get length of L2TP packet */ - uh = (struct udphdr *) skb_transport_header(skb); - length = ntohs(uh->len) - sizeof(struct udphdr); - - /* Too short? */ - if (length < 12) { - PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO, - "%s: recv short L2TP packet (len=%d)\n", tunnel->name, length); - goto error; - } + length = skb->len; /* If type is control packet, it is handled by userspace. */ if (hdrflags & L2TP_HDRFLAG_T) { @@ -606,7 +608,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) "%s: recv data has no seq numbers when required. " "Discarding\n", session->name); session->stats.rx_seq_discards++; - session->stats.rx_errors++; goto discard; } @@ -625,7 +626,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) "%s: recv data has no seq numbers when required. " "Discarding\n", session->name); session->stats.rx_seq_discards++; - session->stats.rx_errors++; goto discard; } @@ -634,10 +634,14 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) } /* If offset bit set, skip it. */ - if (hdrflags & L2TP_HDRFLAG_O) - ptr += 2 + ntohs(*(__be16 *) ptr); + if (hdrflags & L2TP_HDRFLAG_O) { + offset = ntohs(*(__be16 *)ptr); + skb->transport_header += 2 + offset; + if (!pskb_may_pull(skb, skb_transport_offset(skb) + 2)) + goto discard; + } - skb_pull(skb, ptr - skb->data); + __skb_pull(skb, skb_transport_offset(skb)); /* Skip PPP header, if present. In testing, Microsoft L2TP clients * don't send the PPP header (PPP header compression enabled), but @@ -673,7 +677,6 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) */ if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) { session->stats.rx_seq_discards++; - session->stats.rx_errors++; PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG, "%s: oos pkt %hu len %d discarded, " "waiting for %hu, reorder_q_len=%d\n", @@ -698,6 +701,7 @@ static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb) return 0; discard: + session->stats.rx_errors++; kfree_skb(skb); sock_put(session->sock); -- cgit v1.2.3-58-ga151 From f3d5e3a4155b6f42f6f6f0a2cc95ca0adbabe1af Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 19 Sep 2007 10:46:28 -0700 Subject: [PPP] L2TP: Fix skb handling in pppol2tp_xmit This patch makes pppol2tp_xmit call skb_cow_head so that we don't modify cloned skb data. It also gets rid of skb2 we only need to preserve the original skb for congestion notification, which is only applicable for ppp_async and ppp_sync. The other semantic change made here is the removal of socket accounting for data tranmitted out of pppol2tp_xmit. The original code leaked any existing socket skb accounting. We could fix this by dropping the original skb owner. However, this is undesirable as the packet has not physically left the host yet. In fact, all other tunnels in the kernel do not account skb's passing through to their own socket. In partciular, ESP over UDP does not do so and it is the closest tunnel type to PPPoL2TP. So this patch simply removes the socket accounting in pppol2tp_xmit. The accounting still applies to control packets of course. I've also added a reminder that the outgoing checksum here doesn't work. I suppose existing deployments don't actually enable checksums. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppol2tp.c | 63 ++++++++++++++++++-------------------------------- 1 file changed, 23 insertions(+), 40 deletions(-) diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 440e190778a1..abe91cb595f4 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -962,7 +962,6 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) int data_len = skb->len; struct inet_sock *inet; __wsum csum = 0; - struct sk_buff *skb2 = NULL; struct udphdr *uh; unsigned int len; @@ -993,41 +992,30 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) */ headroom = NET_SKB_PAD + sizeof(struct iphdr) + sizeof(struct udphdr) + hdr_len + sizeof(ppph); - if (skb_headroom(skb) < headroom) { - skb2 = skb_realloc_headroom(skb, headroom); - if (skb2 == NULL) - goto abort; - } else - skb2 = skb; - - /* Check that the socket has room */ - if (atomic_read(&sk_tun->sk_wmem_alloc) < sk_tun->sk_sndbuf) - skb_set_owner_w(skb2, sk_tun); - else - goto discard; + if (skb_cow_head(skb, headroom)) + goto abort; /* Setup PPP header */ - skb_push(skb2, sizeof(ppph)); - skb2->data[0] = ppph[0]; - skb2->data[1] = ppph[1]; + __skb_push(skb, sizeof(ppph)); + skb->data[0] = ppph[0]; + skb->data[1] = ppph[1]; /* Setup L2TP header */ - skb_push(skb2, hdr_len); - pppol2tp_build_l2tp_header(session, skb2->data); + pppol2tp_build_l2tp_header(session, __skb_push(skb, hdr_len)); /* Setup UDP header */ inet = inet_sk(sk_tun); - skb_push(skb2, sizeof(struct udphdr)); - skb_reset_transport_header(skb2); - uh = (struct udphdr *) skb2->data; + __skb_push(skb, sizeof(*uh)); + skb_reset_transport_header(skb); + uh = udp_hdr(skb); uh->source = inet->sport; uh->dest = inet->dport; uh->len = htons(sizeof(struct udphdr) + hdr_len + sizeof(ppph) + data_len); uh->check = 0; - /* Calculate UDP checksum if configured to do so */ + /* *BROKEN* Calculate UDP checksum if configured to do so */ if (sk_tun->sk_no_check != UDP_CSUM_NOXMIT) - csum = udp_csum_outgoing(sk_tun, skb2); + csum = udp_csum_outgoing(sk_tun, skb); /* Debug */ if (session->send_seq) @@ -1040,7 +1028,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) if (session->debug & PPPOL2TP_MSG_DATA) { int i; - unsigned char *datap = skb2->data; + unsigned char *datap = skb->data; printk(KERN_DEBUG "%s: xmit:", session->name); for (i = 0; i < data_len; i++) { @@ -1053,18 +1041,18 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) printk("\n"); } - memset(&(IPCB(skb2)->opt), 0, sizeof(IPCB(skb2)->opt)); - IPCB(skb2)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED | - IPSKB_REROUTED); - nf_reset(skb2); + memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); + IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED | + IPSKB_REROUTED); + nf_reset(skb); /* Get routing info from the tunnel socket */ - dst_release(skb2->dst); - skb2->dst = sk_dst_get(sk_tun); + dst_release(skb->dst); + skb->dst = sk_dst_get(sk_tun); /* Queue the packet to IP for output */ - len = skb2->len; - rc = ip_queue_xmit(skb2, 1); + len = skb->len; + rc = ip_queue_xmit(skb, 1); /* Update stats */ if (rc >= 0) { @@ -1077,17 +1065,12 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) session->stats.tx_errors++; } - /* Free the original skb */ - kfree_skb(skb); - return 1; -discard: - /* Free the new skb. Caller will free original skb. */ - if (skb2 != skb) - kfree_skb(skb2); abort: - return 0; + /* Free the original skb */ + kfree_skb(skb); + return 1; } /***************************************************************************** -- cgit v1.2.3-58-ga151 From cd46171c7297739dc7e46d885862e98023eab9c7 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Thu, 20 Sep 2007 11:04:58 -0700 Subject: [BNX2]: Add PHY workaround for 5709 A1. Add the DIS_EARLY_DAC PHY workaround for 5709 A1. Without it, link sometimes does not come up. Update version to 1.6.5. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 854d80c330ec..66eed22cbd21 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -54,8 +54,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.6.4" -#define DRV_MODULE_RELDATE "August 3, 2007" +#define DRV_MODULE_VERSION "1.6.5" +#define DRV_MODULE_RELDATE "September 20, 2007" #define RUN_AT(x) (jiffies + (x)) @@ -6727,7 +6727,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) } else if (CHIP_NUM(bp) == CHIP_NUM_5706 || CHIP_NUM(bp) == CHIP_NUM_5708) bp->phy_flags |= PHY_CRC_FIX_FLAG; - else if (CHIP_ID(bp) == CHIP_ID_5709_A0) + else if (CHIP_ID(bp) == CHIP_ID_5709_A0 || + CHIP_ID(bp) == CHIP_ID_5709_A1) bp->phy_flags |= PHY_DIS_EARLY_DAC_FLAG; if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || -- cgit v1.2.3-58-ga151 From be7963b7e7f08a149e247c0bf29a4abd174e0929 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 20 Sep 2007 21:17:33 +0200 Subject: ieee1394: ohci1394: fix initialization if built non-modular Initialization of ohci1394 was broken according to one reporter if the driver was statically linked, i.e. not built as loadable module. Dmesg: PCI: Device 0000:02:07.0 not available because of resource collisions ohci1394: Failed to enable OHCI hardware. This was reported for a Toshiba Satellite 5100-503. The cause is commit 8df4083c5291b3647e0381d3c69ab2196f5dd3b7 in Linux 2.6.19-rc1 which only served purposes of early remote debugging via FireWire. This functionality is better provided by the currently out-of-tree driver ohci1394_earlyinit. Reversal of the commit was OK'd by Andi Kleen. Signed-off-by: Stefan Richter --- drivers/ieee1394/ieee1394_core.c | 2 +- drivers/ieee1394/ohci1394.c | 4 +--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index ee45259573c8..98fd985a32ff 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -1273,7 +1273,7 @@ static void __exit ieee1394_cleanup(void) unregister_chrdev_region(IEEE1394_CORE_DEV, 256); } -fs_initcall(ieee1394_init); /* same as ohci1394 */ +module_init(ieee1394_init); module_exit(ieee1394_cleanup); /* Exported symbols */ diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 5667c8102efc..372c5c16eb31 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -3537,7 +3537,5 @@ static int __init ohci1394_init(void) return pci_register_driver(&ohci1394_pci_driver); } -/* Register before most other device drivers. - * Useful for remote debugging via physical DMA, e.g. using firescope. */ -fs_initcall(ohci1394_init); +module_init(ohci1394_init); module_exit(ohci1394_cleanup); -- cgit v1.2.3-58-ga151 From d6532232cd3de79c852685823a9c52f723816d0a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:42 -0700 Subject: sky2: fix VLAN receive processing (resend) The length check for truncated frames was not correctly handling the case where VLAN acceleration had already read the tag. Also, the Yukon EX has some features that use high bit of status as security tag. Signed-off-by: Pierre-Yves Ritschard Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 14 +++++++++++++- drivers/net/sky2.h | 2 +- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5d812de65d90..8b1565453f08 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2103,6 +2103,13 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sky2_port *sky2 = netdev_priv(dev); struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; + u16 count = (status & GMR_FS_LEN) >> 16; + +#ifdef SKY2_VLAN_TAG_USED + /* Account for vlan tag */ + if (sky2->vlgrp && (status & GMR_FS_VLAN)) + count -= VLAN_HLEN; +#endif if (unlikely(netif_msg_rx_status(sky2))) printk(KERN_DEBUG PFX "%s: rx slot %u status 0x%x len %d\n", @@ -2117,7 +2124,8 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (!(status & GMR_FS_RX_OK)) goto resubmit; - if (status >> 16 != length) + /* if length reported by DMA does not match PHY, packet was truncated */ + if (length != count) goto len_mismatch; if (length < copybreak) @@ -2133,6 +2141,10 @@ len_mismatch: /* Truncation of overlength packets causes PHY length to not match MAC length */ ++sky2->net_stats.rx_length_errors; + if (netif_msg_rx_err(sky2) && net_ratelimit()) + pr_info(PFX "%s: rx length mismatch: length %d status %#x\n", + dev->name, length, status); + goto resubmit; error: ++sky2->net_stats.rx_errors; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 72e12b7cfa40..3baae48f8042 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1668,7 +1668,7 @@ enum { /* Receive Frame Status Encoding */ enum { - GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_LEN = 0x7fff<<16, /* Bit 30..16: Rx Frame Length */ GMR_FS_VLAN = 1<<13, /* VLAN Packet */ GMR_FS_JABBER = 1<<12, /* Jabber Packet */ GMR_FS_UN_SIZE = 1<<11, /* Undersize Packet */ -- cgit v1.2.3-58-ga151 From c99210b50fe741026d86fdcb5f3f5a0c00c503cc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:43 -0700 Subject: sky2: ethtool speed report bug On 100mbit versions, the driver always reports gigabit speed available. The correct modes are already computed, then overwritten. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8b1565453f08..94552cc4c462 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2841,13 +2841,6 @@ static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) ecmd->supported = sky2_supported_modes(hw); ecmd->phy_address = PHY_ADDR_MARV; if (sky2_is_copper(hw)) { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg | SUPPORTED_TP; ecmd->port = PORT_TP; ecmd->speed = sky2->speed; } else { -- cgit v1.2.3-58-ga151 From ea76e63598eb312e5d33a782275be91038fc6df2 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:44 -0700 Subject: sky2: reorganize chip revision features This patch should cause no functional changes in driver behaviour. There are (too) many revisions of the Yukon 2 chip now. Instead of adding more conditionals based on chip revision; rerganize into a set of feature flags so adding new versions is less problematic. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 135 +++++++++++++++++++++++++++++++---------------------- drivers/net/sky2.h | 12 ++++- 2 files changed, 90 insertions(+), 57 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 94552cc4c462..060951a8022b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -217,8 +217,7 @@ static void sky2_power_on(struct sky2_hw *hw) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || - hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_ADV_POWER_CTL) { u32 reg; sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -311,10 +310,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(hw->dev[port]); u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; - if (sky2->autoneg == AUTONEG_ENABLE - && !(hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + if (sky2->autoneg == AUTONEG_ENABLE && + !(hw->flags & SKY2_HW_NEWER_PHY)) { u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | @@ -346,9 +343,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* downshift on PHY 88E1112 and 88E1149 is changed */ if (sky2->autoneg == AUTONEG_ENABLE - && (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX)) { + && (hw->flags & SKY2_HW_NEWER_PHY)) { /* set downshift counter to 3x and enable downshift */ ctrl &= ~PHY_M_PC_DSC_MSK; ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; @@ -364,7 +359,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); /* special setup for PHY 88E1112 Fiber */ - if (hw->chip_id == CHIP_ID_YUKON_XL && !sky2_is_copper(hw)) { + if (hw->chip_id == CHIP_ID_YUKON_XL && (hw->flags & SKY2_HW_FIBRE_PHY)) { pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); /* Fiber: select 1000BASE-X only mode MAC Specific Ctrl Reg. */ @@ -788,7 +783,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { + if (!(hw->flags & SKY2_HW_RAMBUFFER)) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -967,19 +962,15 @@ static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) */ static void rx_set_checksum(struct sky2_port *sky2) { - struct sky2_rx_le *le; - - if (sky2->hw->chip_id != CHIP_ID_YUKON_EX) { - le = sky2_next_rx(sky2); - le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); - le->ctrl = 0; - le->opcode = OP_TCPSTART | HW_OWNER; + struct sky2_rx_le *le = sky2_next_rx(sky2); - sky2_write32(sky2->hw, - Q_ADDR(rxqaddr[sky2->port], Q_CSR), - sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); - } + le->addr = cpu_to_le32((ETH_HLEN << 16) | ETH_HLEN); + le->ctrl = 0; + le->opcode = OP_TCPSTART | HW_OWNER; + sky2_write32(sky2->hw, + Q_ADDR(rxqaddr[sky2->port], Q_CSR), + sky2->rx_csum ? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM); } /* @@ -1175,7 +1166,8 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); - rx_set_checksum(sky2); + if (!(hw->flags & SKY2_HW_NEW_LE)) + rx_set_checksum(sky2); /* Space needed for frame data + headers rounded up */ size = roundup(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8); @@ -1246,7 +1238,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 ramsize, imask; + u32 imask; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1301,13 +1293,13 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - /* Register is number of 4K blocks on internal RAM buffer. */ - ramsize = sky2_read8(hw, B2_E_0) * 4; - printk(KERN_INFO PFX "%s: ram buffer %dK\n", dev->name, ramsize); - - if (ramsize > 0) { + if (hw->flags & SKY2_HW_RAMBUFFER) { + /* Register is number of 4K blocks on internal RAM buffer. */ + u32 ramsize = sky2_read8(hw, B2_E_0) * 4; u32 rxspace; + printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); + if (ramsize < 16) rxspace = ramsize / 2; else @@ -1436,13 +1428,15 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Check for TCP Segmentation Offload */ mss = skb_shinfo(skb)->gso_size; if (mss != 0) { - if (hw->chip_id != CHIP_ID_YUKON_EX) + + if (!(hw->flags & SKY2_HW_NEW_LE)) mss += ETH_HLEN + ip_hdrlen(skb) + tcp_hdrlen(skb); if (mss != sky2->tx_last_mss) { le = get_tx_le(sky2); le->addr = cpu_to_le32(mss); - if (hw->chip_id == CHIP_ID_YUKON_EX) + + if (hw->flags & SKY2_HW_NEW_LE) le->opcode = OP_MSS | HW_OWNER; else le->opcode = OP_LRGLEN | HW_OWNER; @@ -1468,8 +1462,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) /* Handle TCP checksum offload */ if (skb->ip_summed == CHECKSUM_PARTIAL) { /* On Yukon EX (some versions) encoding change. */ - if (hw->chip_id == CHIP_ID_YUKON_EX - && hw->chip_rev != CHIP_REV_YU_EX_B0) + if (hw->flags & SKY2_HW_AUTO_TX_SUM) ctrl |= CALSUM; /* auto checksum */ else { const unsigned offset = skb_transport_offset(skb); @@ -1708,7 +1701,7 @@ static int sky2_down(struct net_device *dev) static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) { - if (!sky2_is_copper(hw)) + if (hw->flags & SKY2_HW_FIBRE_PHY) return SPEED_1000; if (hw->chip_id == CHIP_ID_YUKON_FE) @@ -1753,9 +1746,7 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->chip_id == CHIP_ID_YUKON_XL - || hw->chip_id == CHIP_ID_YUKON_EC_U - || hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_NEWER_PHY) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ @@ -1847,7 +1838,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) /* Since the pause result bits seem to in different positions on * different chips. look at registers. */ - if (!sky2_is_copper(hw)) { + if (hw->flags & SKY2_HW_FIBRE_PHY) { /* Shift for bits in fiber PHY */ advert &= ~(ADVERTISE_PAUSE_CAP|ADVERTISE_PAUSE_ASYM); lpa &= ~(LPA_PAUSE_CAP|LPA_PAUSE_ASYM); @@ -2593,23 +2584,56 @@ static int __devinit sky2_init(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_RST_CLR); hw->chip_id = sky2_read8(hw, B2_CHIP_ID); - if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) { + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + + switch(hw->chip_id) { + case CHIP_ID_YUKON_XL: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_EC_U: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_ADV_POWER_CTL; + break; + + case CHIP_ID_YUKON_EX: + hw->flags = SKY2_HW_GIGABIT + | SKY2_HW_NEWER_PHY + | SKY2_HW_NEW_LE + | SKY2_HW_ADV_POWER_CTL; + + /* New transmit checksum */ + if (hw->chip_rev != CHIP_REV_YU_EX_B0) + hw->flags |= SKY2_HW_AUTO_TX_SUM; + break; + + case CHIP_ID_YUKON_EC: + /* This rev is really old, and requires untested workarounds */ + if (hw->chip_rev == CHIP_REV_YU_EC_A1) { + dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); + return -EOPNOTSUPP; + } + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + break; + + case CHIP_ID_YUKON_FE: + hw->flags = SKY2_HW_RAMBUFFER; + break; + + default: dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", hw->chip_id); return -EOPNOTSUPP; } - hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; + hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); + if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') + hw->flags |= SKY2_HW_FIBRE_PHY; - /* This rev is really old, and requires untested workarounds */ - if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) { - dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n", - yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL], - hw->chip_id, hw->chip_rev); - return -EOPNOTSUPP; - } - hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -2821,7 +2845,7 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw) | SUPPORTED_100baseT_Full | SUPPORTED_Autoneg | SUPPORTED_TP; - if (hw->chip_id != CHIP_ID_YUKON_FE) + if (hw->flags & SKY2_HW_GIGABIT) modes |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; return modes; @@ -3851,7 +3875,7 @@ static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id) return IRQ_NONE; if (status & Y2_IS_IRQ_SW) { - hw->msi = 1; + hw->flags |= SKY2_HW_USE_MSI; wake_up(&hw->msi_wait); sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ); } @@ -3879,9 +3903,9 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ); sky2_read8(hw, B0_CTST); - wait_event_timeout(hw->msi_wait, hw->msi, HZ/10); + wait_event_timeout(hw->msi_wait, (hw->flags & SKY2_HW_USE_MSI), HZ/10); - if (!hw->msi) { + if (!(hw->flags & SKY2_HW_USE_MSI)) { /* MSI test failed, go back to INTx mode */ dev_info(&pdev->dev, "No interrupt generated using MSI, " "switching to INTx mode.\n"); @@ -4014,7 +4038,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } - err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED, + err = request_irq(pdev->irq, sky2_intr, + (hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED, dev->name, hw); if (err) { dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq); @@ -4047,7 +4072,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev, return 0; err_out_unregister: - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); unregister_netdev(dev); err_out_free_netdev: @@ -4096,7 +4121,7 @@ static void __devexit sky2_remove(struct pci_dev *pdev) sky2_read8(hw, B0_CTST); free_irq(pdev->irq, hw); - if (hw->msi) + if (hw->flags & SKY2_HW_USE_MSI) pci_disable_msi(pdev); pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma); pci_release_regions(pdev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 3baae48f8042..af303496f9e2 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2040,6 +2040,15 @@ struct sky2_hw { void __iomem *regs; struct pci_dev *pdev; struct net_device *dev[2]; + unsigned long flags; +#define SKY2_HW_USE_MSI 0x00000001 +#define SKY2_HW_FIBRE_PHY 0x00000002 +#define SKY2_HW_GIGABIT 0x00000004 +#define SKY2_HW_NEWER_PHY 0x00000008 +#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ +#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ +#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ u8 chip_id; u8 chip_rev; @@ -2053,13 +2062,12 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; - int msi; wait_queue_head_t msi_wait; }; static inline int sky2_is_copper(const struct sky2_hw *hw) { - return !(hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P'); + return !(hw->flags & SKY2_HW_FIBRE_PHY); } /* Register accessor for memory mapped device */ -- cgit v1.2.3-58-ga151 From 05745c4ab1c58fbb6ab8e8d3a40e0e395d7e2b0e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:45 -0700 Subject: sky2: fe+ chip support Add support for newest Marvell chips. The Yukon FE plus chip is found in some not yet released laptops. Tested on hardware evaluation boards. This version of the patch is for 2.6.23. It supersedes the two previous patches that are sitting in netdev-2.6 (upstream branch). Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 136 ++++++++++++++++++++++++++++++++++++++++------------- drivers/net/sky2.h | 18 +++++-- 2 files changed, 117 insertions(+), 37 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 060951a8022b..d0e5875628e9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -118,12 +118,15 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4351) }, /* 88E8036 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4362) }, /* 88E8053 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4363) }, /* 88E8055 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4364) }, /* 88E8056 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4365) }, /* 88E8070 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */ @@ -147,6 +150,7 @@ static const char *yukon2_name[] = { "Extreme", /* 0xb5 */ "EC", /* 0xb6 */ "FE", /* 0xb7 */ + "FE+", /* 0xb8 */ }; static void sky2_set_multicast(struct net_device *dev); @@ -331,7 +335,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); if (sky2_is_copper(hw)) { - if (hw->chip_id == CHIP_ID_YUKON_FE) { + if (!(hw->flags & SKY2_HW_GIGABIT)) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; } else { @@ -450,7 +454,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gma_write16(hw, port, GM_GP_CTRL, reg); - if (hw->chip_id != CHIP_ID_YUKON_FE) + if (hw->flags & SKY2_HW_GIGABIT) gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); @@ -474,6 +478,23 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); break; + case CHIP_ID_YUKON_FE_P: + /* Enable Link Partner Next Page */ + ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); + ctrl |= PHY_M_PC_ENA_LIP_NP; + + /* disable Energy Detect and enable scrambler */ + ctrl &= ~(PHY_M_PC_ENA_ENE_DT | PHY_M_PC_DIS_SCRAMB); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); + + /* set LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED */ + ctrl = PHY_M_FELP_LED2_CTRL(LED_PAR_CTRL_ACT_BL) | + PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_LINK) | + PHY_M_FELP_LED0_CTRL(LED_PAR_CTRL_SPEED); + + gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, ctrl); + break; + case CHIP_ID_YUKON_XL: pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); @@ -543,7 +564,13 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* set page register to 0 */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0); + } else if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) { + /* apply workaround for integrated resistors calibration */ + gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17); + gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60); } else if (hw->chip_id != CHIP_ID_YUKON_EX) { + /* no effect on Yukon-XL */ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { @@ -664,25 +691,25 @@ static void sky2_wol_init(struct sky2_port *sky2) static void sky2_set_tx_stfwd(struct sky2_hw *hw, unsigned port) { - if (hw->chip_id == CHIP_ID_YUKON_EX && hw->chip_rev != CHIP_REV_YU_EX_A0) { + struct net_device *dev = hw->dev[port]; + + if (dev->mtu <= ETH_DATA_LEN) sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_STFW_ENA | - (hw->dev[port]->mtu > ETH_DATA_LEN) ? TX_JUMBO_ENA : TX_JUMBO_DIS); - } else { - if (hw->dev[port]->mtu > ETH_DATA_LEN) { - /* set Tx GMAC FIFO Almost Empty Threshold */ - sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), - (ECU_JUMBO_WM << 16) | ECU_AE_THR); + TX_JUMBO_DIS | TX_STFW_ENA); + + else if (hw->chip_id != CHIP_ID_YUKON_EC_U) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_STFW_ENA | TX_JUMBO_ENA); + else { + /* set Tx GMAC FIFO Almost Empty Threshold */ + sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), + (ECU_JUMBO_WM << 16) | ECU_AE_THR); - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_JUMBO_ENA | TX_STFW_DIS); + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_DIS); - /* Can't do offload because of lack of store/forward */ - hw->dev[port]->features &= ~(NETIF_F_TSO | NETIF_F_SG - | NETIF_F_ALL_CSUM); - } else - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - TX_JUMBO_DIS | TX_STFW_ENA); + /* Can't do offload because of lack of store/forward */ + dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_ALL_CSUM); } } @@ -768,7 +795,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) /* Configure Rx MAC FIFO */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); rx_reg = GMF_OPER_ON | GMF_RX_F_FL_ON; - if (hw->chip_id == CHIP_ID_YUKON_EX) + if (hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) rx_reg |= GMF_RX_OVER_ON; sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), rx_reg); @@ -777,7 +805,12 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write16(hw, SK_REG(port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR); /* Set threshold to 0xa (64 bytes) + 1 to workaround pause bug */ - sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1); + reg = RX_GMF_FL_THR_DEF + 1; + /* Another magic mystery workaround from sk98lin */ + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) + reg = 0x178; + sky2_write16(hw, SK_REG(port, RX_GMF_FL_THR), reg); /* Configure Tx MAC FIFO */ sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); @@ -1704,8 +1737,12 @@ static u16 sky2_phy_speed(const struct sky2_hw *hw, u16 aux) if (hw->flags & SKY2_HW_FIBRE_PHY) return SPEED_1000; - if (hw->chip_id == CHIP_ID_YUKON_FE) - return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + if (!(hw->flags & SKY2_HW_GIGABIT)) { + if (aux & PHY_M_PS_SPEED_100) + return SPEED_100; + else + return SPEED_10; + } switch (aux & PHY_M_PS_SPEED_MSK) { case PHY_M_PS_SPEED_1000: @@ -1949,7 +1986,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - if (new_mtu > ETH_DATA_LEN && hw->chip_id == CHIP_ID_YUKON_FE) + if (new_mtu > ETH_DATA_LEN && + (hw->chip_id == CHIP_ID_YUKON_FE || + hw->chip_id == CHIP_ID_YUKON_FE_P)) return -EINVAL; if (!netif_running(dev)) { @@ -1966,7 +2005,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) + if (!(hw->flags & SKY2_HW_RAMBUFFER)) sky2_set_tx_stfwd(hw, port); ctl = gma_read16(hw, port, GM_GP_CTRL); @@ -2205,7 +2244,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) } /* This chip reports checksum status differently */ - if (hw->chip_id == CHIP_ID_YUKON_EX) { + if (hw->flags & SKY2_HW_NEW_LE) { if (sky2->rx_csum && (le->css & (CSS_ISIPV4 | CSS_ISIPV6)) && (le->css & CSS_TCPUDPCSOK)) @@ -2246,8 +2285,14 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) if (!sky2->rx_csum) break; - if (hw->chip_id == CHIP_ID_YUKON_EX) + /* If this happens then driver assuming wrong format */ + if (unlikely(hw->flags & SKY2_HW_NEW_LE)) { + if (net_ratelimit()) + printk(KERN_NOTICE "%s: unexpected" + " checksum status\n", + dev->name); break; + } /* Both checksum counters are programmed to start at * the same offset, so unless there is a problem they @@ -2549,17 +2594,25 @@ static void sky2_netpoll(struct net_device *dev) #endif /* Chip internal frequency for clock calculations */ -static inline u32 sky2_mhz(const struct sky2_hw *hw) +static u32 sky2_mhz(const struct sky2_hw *hw) { switch (hw->chip_id) { case CHIP_ID_YUKON_EC: case CHIP_ID_YUKON_EC_U: case CHIP_ID_YUKON_EX: - return 125; /* 125 Mhz */ + return 125; + case CHIP_ID_YUKON_FE: - return 100; /* 100 Mhz */ - default: /* YUKON_XL */ - return 156; /* 156 Mhz */ + return 100; + + case CHIP_ID_YUKON_FE_P: + return 50; + + case CHIP_ID_YUKON_XL: + return 156; + + default: + BUG(); } } @@ -2623,6 +2676,12 @@ static int __devinit sky2_init(struct sky2_hw *hw) hw->flags = SKY2_HW_RAMBUFFER; break; + case CHIP_ID_YUKON_FE_P: + hw->flags = SKY2_HW_NEWER_PHY + | SKY2_HW_NEW_LE + | SKY2_HW_AUTO_TX_SUM + | SKY2_HW_ADV_POWER_CTL; + break; default: dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n", hw->chip_id); @@ -2827,7 +2886,9 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) sky2->wol = wol->wolopts; - if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_FE_P) sky2_write32(hw, B0_CTST, sky2->wol ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF); @@ -3820,6 +3881,13 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); + /* This chip has hardware problems that generates + * bogus PHY receive status so by default shut up the message. + */ + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) + sky2->msg_enable &= ~NETIF_MSG_RX_ERR; + /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->flow_mode = FC_BOTH; @@ -4189,7 +4257,9 @@ static int sky2_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D0, 0); /* Re-enable all clocks */ - if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U) + if (hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_FE_P) sky2_pci_write32(hw, PCI_DEV_REG3, 0); sky2_reset(hw); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index af303496f9e2..a05b30b68fa1 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -470,18 +470,24 @@ enum { CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ - + CHIP_ID_YUKON_FE_P = 0xb8, /* Chip ID for YUKON-2 FE+ */ +}; +enum yukon_ec_rev { CHIP_REV_YU_EC_A1 = 0, /* Chip Rev. for Yukon-EC A1/A0 */ CHIP_REV_YU_EC_A2 = 1, /* Chip Rev. for Yukon-EC A2 */ CHIP_REV_YU_EC_A3 = 2, /* Chip Rev. for Yukon-EC A3 */ - +}; +enum yukon_ec_u_rev { CHIP_REV_YU_EC_U_A0 = 1, CHIP_REV_YU_EC_U_A1 = 2, CHIP_REV_YU_EC_U_B0 = 3, - +}; +enum yukon_fe_rev { CHIP_REV_YU_FE_A1 = 1, CHIP_REV_YU_FE_A2 = 2, - +}; +enum yukon_fe_p_rev { + CHIP_REV_YU_FE2_A0 = 0, }; enum yukon_ex_rev { CHIP_REV_YU_EX_A0 = 1, @@ -1729,6 +1735,10 @@ enum { GMF_RX_CTRL_DEF = GMF_OPER_ON | GMF_RX_F_FL_ON, }; +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +enum { + TX_DYN_WM_ENA = 3, /* Yukon-FE+ specific */ +}; /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ enum { -- cgit v1.2.3-58-ga151 From 75e806838a3327d4ca9030e588d34de11b04f341 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:46 -0700 Subject: sky2: receive FIFO checking A driver writer from another operating system hinted that the versions of Yukon 2 chip with rambuffer (EC and XL) have a hardware bug that if the FIFO ever gets completely full it will hang. Sounds like a classic ring full vs ring empty wrap around bug. As a workaround, use the existing watchdog timer to check for ring full lockup. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 74 ++++++++++++++++++++++++++++++++++++++++++------------ drivers/net/sky2.h | 9 ++++++- 2 files changed, 66 insertions(+), 17 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index d0e5875628e9..2831f44e6270 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1648,9 +1648,6 @@ static int sky2_down(struct net_device *dev) if (netif_msg_ifdown(sky2)) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); - if (netif_carrier_ok(dev) && --hw->active == 0) - del_timer(&hw->watchdog_timer); - /* Stop more packets from being queued */ netif_stop_queue(dev); @@ -1775,9 +1772,7 @@ static void sky2_link_up(struct sky2_port *sky2) netif_carrier_on(sky2->netdev); - if (hw->active++ == 0) - mod_timer(&hw->watchdog_timer, jiffies + 1); - + mod_timer(&hw->watchdog_timer, jiffies + 1); /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), @@ -1828,11 +1823,6 @@ static void sky2_link_down(struct sky2_port *sky2) netif_carrier_off(sky2->netdev); - /* Stop watchdog if both ports are not active */ - if (--hw->active == 0) - del_timer(&hw->watchdog_timer); - - /* Turn on link LED */ sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); @@ -2484,20 +2474,72 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); } -/* Check for lost IRQ once a second */ +static int sky2_rx_hung(struct net_device *dev) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; + unsigned rxq = rxqaddr[port]; + u32 mac_rp = sky2_read32(hw, SK_REG(port, RX_GMF_RP)); + u8 mac_lev = sky2_read8(hw, SK_REG(port, RX_GMF_RLEV)); + u8 fifo_rp = sky2_read8(hw, Q_ADDR(rxq, Q_RP)); + u8 fifo_lev = sky2_read8(hw, Q_ADDR(rxq, Q_RL)); + + /* If idle and MAC or PCI is stuck */ + if (sky2->check.last == dev->last_rx && + ((mac_rp == sky2->check.mac_rp && + mac_lev != 0 && mac_lev >= sky2->check.mac_lev) || + /* Check if the PCI RX hang */ + (fifo_rp == sky2->check.fifo_rp && + fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) { + printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n", + dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp, + sky2_read8(hw, Q_ADDR(rxq, Q_WP))); + return 1; + } else { + sky2->check.last = dev->last_rx; + sky2->check.mac_rp = mac_rp; + sky2->check.mac_lev = mac_lev; + sky2->check.fifo_rp = fifo_rp; + sky2->check.fifo_lev = fifo_lev; + return 0; + } +} + static void sky2_watchdog(unsigned long arg) { struct sky2_hw *hw = (struct sky2_hw *) arg; + struct net_device *dev; + /* Check for lost IRQ once a second */ if (sky2_read32(hw, B0_ISRC)) { - struct net_device *dev = hw->dev[0]; - + dev = hw->dev[0]; if (__netif_rx_schedule_prep(dev)) __netif_rx_schedule(dev); + } else { + int i, active = 0; + + for (i = 0; i < hw->ports; i++) { + dev = hw->dev[i]; + if (!netif_running(dev)) + continue; + ++active; + + /* For chips with Rx FIFO, check if stuck */ + if ((hw->flags & SKY2_HW_RAMBUFFER) && + sky2_rx_hung(dev)) { + pr_info(PFX "%s: receiver hang detected\n", + dev->name); + schedule_work(&hw->restart_work); + return; + } + } + + if (active == 0) + return; } - if (hw->active > 0) - mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); + mod_timer(&hw->watchdog_timer, round_jiffies(jiffies + HZ)); } /* Hardware/software error handling */ diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index a05b30b68fa1..69cd98400fe6 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2027,6 +2027,14 @@ struct sky2_port { u16 rx_tag; struct vlan_group *vlgrp; #endif + struct { + unsigned long last; + u32 mac_rp; + u8 mac_lev; + u8 fifo_rp; + u8 fifo_lev; + } check; + dma_addr_t rx_le_map; dma_addr_t tx_le_map; @@ -2064,7 +2072,6 @@ struct sky2_hw { u8 chip_rev; u8 pmd_type; u8 ports; - u8 active; struct sky2_status_le *st_le; u32 st_idx; -- cgit v1.2.3-58-ga151 From faf60e72d07d163a623e47269680918fccaa789a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Sep 2007 15:36:47 -0700 Subject: sky2: version 1.18 Update version number Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2831f44e6270..eaffe551d1d8 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -51,7 +51,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.17" +#define DRV_VERSION "1.18" #define PFX DRV_NAME " " /* -- cgit v1.2.3-58-ga151 From 0e3dbc01d53940fe10e5a5cfec15ede3e929c918 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 20 Sep 2007 15:22:47 +0100 Subject: libata: Update the blacklist with a few more devices Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c43de9a710db..772be09b4689 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3778,6 +3778,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ }, { "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ }, + { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, }, + { "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI", ATA_HORKAGE_NONCQ }, /* NCQ hard hangs device under heavier load, needs hard power cycle */ @@ -3794,6 +3797,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, }, { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, }, + { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, }, { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, }, /* devices which puke on READ_NATIVE_MAX */ -- cgit v1.2.3-58-ga151 From e1cc9de8361f267101402a1181cff4d3d3225a6d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 20 Sep 2007 15:03:07 +0100 Subject: libata-sff: Fix documentation Code moved to ioread/iowrite but the comment didn't Also note a posting issue Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 1cce2198baaf..8023167bbbeb 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -297,7 +297,7 @@ void ata_bmdma_start (struct ata_queued_cmd *qc) dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - /* Strictly, one may wish to issue a readb() here, to + /* Strictly, one may wish to issue an ioread8() here, to * flush the mmio write. However, control also passes * to the hardware at this point, and it will interrupt * us when we are to resume control. So, in effect, @@ -307,6 +307,9 @@ void ata_bmdma_start (struct ata_queued_cmd *qc) * is expected, so I think it is best to not add a readb() * without first all the MMIO ATA cards/mobos. * Or maybe I'm just being paranoid. + * + * FIXME: The posting of this write means I/O starts are + * unneccessarily delayed for MMIO */ } -- cgit v1.2.3-58-ga151 From c69c0892d8dd68b01a9fced5cab8527f0698c15e Mon Sep 17 00:00:00 2001 From: henry su Date: Thu, 20 Sep 2007 16:07:33 -0400 Subject: [libata] ahci: add ATI SB800 PCI IDs ATI/AMD SB800 shares some device IDs with SB700, and SB800 adds two more device IDs:0x4394,0x4395. Signed-off-by: henry su Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 06f212ff2b4f..c16820325d7b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -418,10 +418,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ - { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */ - { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */ - { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */ - { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */ /* VIA */ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ -- cgit v1.2.3-58-ga151 From 9db619e66503494e41159de3c76fafabe80d016b Mon Sep 17 00:00:00 2001 From: Wolfgang Walter Date: Thu, 20 Sep 2007 15:51:46 -0400 Subject: rpc: fix garbage in printk in svc_tcp_accept() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit we upgraded the kernel of a nfs-server from 2.6.17.11 to 2.6.22.6. Since then we get the message lockd: too many open TCP sockets, consider increasing the number of nfsd threads lockd: last TCP connect from ^\\236^\É^D These random characters in the second line are caused by a bug in svc_tcp_accept. (Note: there are two previous __svc_print_addr(sin, buf, sizeof(buf)) calls in this function, either of which would initialize buf correctly; but both are inside "if"'s and are not necessarily executed. This is less obvious in the second case, which is inside a dprintk(), which is a macro which expands to an if statement.) Signed-off-by: Wolfgang Walter Signed-off-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- net/sunrpc/svcsock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 1a899924023f..036ab520df21 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1110,7 +1110,8 @@ svc_tcp_accept(struct svc_sock *svsk) serv->sv_name); printk(KERN_NOTICE "%s: last TCP connect from %s\n", - serv->sv_name, buf); + serv->sv_name, __svc_print_addr(sin, + buf, sizeof(buf))); } /* * Always select the oldest socket. It's not fair, -- cgit v1.2.3-58-ga151 From b8fceee17a310f189188599a8fa5e9beaff57eb0 Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Thu, 20 Sep 2007 12:40:16 -0700 Subject: signalfd simplification This simplifies signalfd code, by avoiding it to remain attached to the sighand during its lifetime. In this way, the signalfd remain attached to the sighand only during poll(2) (and select and epoll) and read(2). This also allows to remove all the custom "tsk == current" checks in kernel/signal.c, since dequeue_signal() will only be called by "current". I think this is also what Ben was suggesting time ago. The external effect of this, is that a thread can extract only its own private signals and the group ones. I think this is an acceptable behaviour, in that those are the signals the thread would be able to fetch w/out signalfd. Signed-off-by: Davide Libenzi Signed-off-by: Linus Torvalds --- fs/exec.c | 3 - fs/signalfd.c | 190 +++++++--------------------------------------- include/linux/init_task.h | 2 +- include/linux/sched.h | 2 +- include/linux/signalfd.h | 40 +--------- kernel/exit.c | 9 --- kernel/fork.c | 2 +- kernel/signal.c | 8 +- 8 files changed, 39 insertions(+), 217 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index c21a8cc06277..073b0b8c6d05 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include @@ -784,7 +783,6 @@ static int de_thread(struct task_struct *tsk) * and we can just re-use it all. */ if (atomic_read(&oldsighand->count) <= 1) { - signalfd_detach(tsk); exit_itimers(sig); return 0; } @@ -923,7 +921,6 @@ static int de_thread(struct task_struct *tsk) sig->flags = 0; no_thread_group: - signalfd_detach(tsk); exit_itimers(sig); if (leader) release_task(leader); diff --git a/fs/signalfd.c b/fs/signalfd.c index a8e293d30034..aefb0be07942 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -11,8 +11,10 @@ * Now using anonymous inode source. * Thanks to Oleg Nesterov for useful code review and suggestions. * More comments and suggestions from Arnd Bergmann. - * Sat May 19, 2007: Davi E. M. Arnaut + * Sat May 19, 2007: Davi E. M. Arnaut * Retrieve multiple signals with one read() call + * Sun Jul 15, 2007: Davide Libenzi + * Attach to the sighand only during read() and poll(). */ #include @@ -27,102 +29,12 @@ #include struct signalfd_ctx { - struct list_head lnk; - wait_queue_head_t wqh; sigset_t sigmask; - struct task_struct *tsk; }; -struct signalfd_lockctx { - struct task_struct *tsk; - unsigned long flags; -}; - -/* - * Tries to acquire the sighand lock. We do not increment the sighand - * use count, and we do not even pin the task struct, so we need to - * do it inside an RCU read lock, and we must be prepared for the - * ctx->tsk going to NULL (in signalfd_deliver()), and for the sighand - * being detached. We return 0 if the sighand has been detached, or - * 1 if we were able to pin the sighand lock. - */ -static int signalfd_lock(struct signalfd_ctx *ctx, struct signalfd_lockctx *lk) -{ - struct sighand_struct *sighand = NULL; - - rcu_read_lock(); - lk->tsk = rcu_dereference(ctx->tsk); - if (likely(lk->tsk != NULL)) - sighand = lock_task_sighand(lk->tsk, &lk->flags); - rcu_read_unlock(); - - if (!sighand) - return 0; - - if (!ctx->tsk) { - unlock_task_sighand(lk->tsk, &lk->flags); - return 0; - } - - if (lk->tsk->tgid == current->tgid) - lk->tsk = current; - - return 1; -} - -static void signalfd_unlock(struct signalfd_lockctx *lk) -{ - unlock_task_sighand(lk->tsk, &lk->flags); -} - -/* - * This must be called with the sighand lock held. - */ -void signalfd_deliver(struct task_struct *tsk, int sig) -{ - struct sighand_struct *sighand = tsk->sighand; - struct signalfd_ctx *ctx, *tmp; - - BUG_ON(!sig); - list_for_each_entry_safe(ctx, tmp, &sighand->signalfd_list, lnk) { - /* - * We use a negative signal value as a way to broadcast that the - * sighand has been orphaned, so that we can notify all the - * listeners about this. Remember the ctx->sigmask is inverted, - * so if the user is interested in a signal, that corresponding - * bit will be zero. - */ - if (sig < 0) { - if (ctx->tsk == tsk) { - ctx->tsk = NULL; - list_del_init(&ctx->lnk); - wake_up(&ctx->wqh); - } - } else { - if (!sigismember(&ctx->sigmask, sig)) - wake_up(&ctx->wqh); - } - } -} - -static void signalfd_cleanup(struct signalfd_ctx *ctx) -{ - struct signalfd_lockctx lk; - - /* - * This is tricky. If the sighand is gone, we do not need to remove - * context from the list, the list itself won't be there anymore. - */ - if (signalfd_lock(ctx, &lk)) { - list_del(&ctx->lnk); - signalfd_unlock(&lk); - } - kfree(ctx); -} - static int signalfd_release(struct inode *inode, struct file *file) { - signalfd_cleanup(file->private_data); + kfree(file->private_data); return 0; } @@ -130,23 +42,15 @@ static unsigned int signalfd_poll(struct file *file, poll_table *wait) { struct signalfd_ctx *ctx = file->private_data; unsigned int events = 0; - struct signalfd_lockctx lk; - poll_wait(file, &ctx->wqh, wait); + poll_wait(file, ¤t->sighand->signalfd_wqh, wait); - /* - * Let the caller get a POLLIN in this case, ala socket recv() when - * the peer disconnects. - */ - if (signalfd_lock(ctx, &lk)) { - if ((lk.tsk == current && - next_signal(&lk.tsk->pending, &ctx->sigmask) > 0) || - next_signal(&lk.tsk->signal->shared_pending, - &ctx->sigmask) > 0) - events |= POLLIN; - signalfd_unlock(&lk); - } else + spin_lock_irq(¤t->sighand->siglock); + if (next_signal(¤t->pending, &ctx->sigmask) || + next_signal(¤t->signal->shared_pending, + &ctx->sigmask)) events |= POLLIN; + spin_unlock_irq(¤t->sighand->siglock); return events; } @@ -219,59 +123,46 @@ static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info, int nonblock) { ssize_t ret; - struct signalfd_lockctx lk; DECLARE_WAITQUEUE(wait, current); - if (!signalfd_lock(ctx, &lk)) - return 0; - - ret = dequeue_signal(lk.tsk, &ctx->sigmask, info); + spin_lock_irq(¤t->sighand->siglock); + ret = dequeue_signal(current, &ctx->sigmask, info); switch (ret) { case 0: if (!nonblock) break; ret = -EAGAIN; default: - signalfd_unlock(&lk); + spin_unlock_irq(¤t->sighand->siglock); return ret; } - add_wait_queue(&ctx->wqh, &wait); + add_wait_queue(¤t->sighand->signalfd_wqh, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); - ret = dequeue_signal(lk.tsk, &ctx->sigmask, info); - signalfd_unlock(&lk); + ret = dequeue_signal(current, &ctx->sigmask, info); if (ret != 0) break; if (signal_pending(current)) { ret = -ERESTARTSYS; break; } + spin_unlock_irq(¤t->sighand->siglock); schedule(); - ret = signalfd_lock(ctx, &lk); - if (unlikely(!ret)) { - /* - * Let the caller read zero byte, ala socket - * recv() when the peer disconnect. This test - * must be done before doing a dequeue_signal(), - * because if the sighand has been orphaned, - * the dequeue_signal() call is going to crash - * because ->sighand will be long gone. - */ - break; - } + spin_lock_irq(¤t->sighand->siglock); } + spin_unlock_irq(¤t->sighand->siglock); - remove_wait_queue(&ctx->wqh, &wait); + remove_wait_queue(¤t->sighand->signalfd_wqh, &wait); __set_current_state(TASK_RUNNING); return ret; } /* - * Returns either the size of a "struct signalfd_siginfo", or zero if the - * sighand we are attached to, has been orphaned. The "count" parameter - * must be at least the size of a "struct signalfd_siginfo". + * Returns a multiple of the size of a "struct signalfd_siginfo", or a negative + * error code. The "count" parameter must be at least the size of a + * "struct signalfd_siginfo". */ static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) @@ -287,7 +178,6 @@ static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count, return -EINVAL; siginfo = (struct signalfd_siginfo __user *) buf; - do { ret = signalfd_dequeue(ctx, &info, nonblock); if (unlikely(ret <= 0)) @@ -300,7 +190,7 @@ static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count, nonblock = 1; } while (--count); - return total ? total : ret; + return total ? total: ret; } static const struct file_operations signalfd_fops = { @@ -309,20 +199,13 @@ static const struct file_operations signalfd_fops = { .read = signalfd_read, }; -/* - * Create a file descriptor that is associated with our signal - * state. We can pass it around to others if we want to, but - * it will always be _our_ signal state. - */ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask) { int error; sigset_t sigmask; struct signalfd_ctx *ctx; - struct sighand_struct *sighand; struct file *file; struct inode *inode; - struct signalfd_lockctx lk; if (sizemask != sizeof(sigset_t) || copy_from_user(&sigmask, user_mask, sizeof(sigmask))) @@ -335,17 +218,7 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas if (!ctx) return -ENOMEM; - init_waitqueue_head(&ctx->wqh); ctx->sigmask = sigmask; - ctx->tsk = current->group_leader; - - sighand = current->sighand; - /* - * Add this fd to the list of signal listeners. - */ - spin_lock_irq(&sighand->siglock); - list_add_tail(&ctx->lnk, &sighand->signalfd_list); - spin_unlock_irq(&sighand->siglock); /* * When we call this, the initialization must be complete, since @@ -364,23 +237,18 @@ asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemas fput(file); return -EINVAL; } - /* - * We need to be prepared of the fact that the sighand this fd - * is attached to, has been detched. In that case signalfd_lock() - * will return 0, and we'll just skip setting the new mask. - */ - if (signalfd_lock(ctx, &lk)) { - ctx->sigmask = sigmask; - signalfd_unlock(&lk); - } - wake_up(&ctx->wqh); + spin_lock_irq(¤t->sighand->siglock); + ctx->sigmask = sigmask; + spin_unlock_irq(¤t->sighand->siglock); + + wake_up(¤t->sighand->signalfd_wqh); fput(file); } return ufd; err_fdalloc: - signalfd_cleanup(ctx); + kfree(ctx); return error; } diff --git a/include/linux/init_task.h b/include/linux/init_task.h index cab741c2d603..f8abfa349ef9 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -86,7 +86,7 @@ extern struct nsproxy init_nsproxy; .count = ATOMIC_INIT(1), \ .action = { { { .sa_handler = NULL, } }, }, \ .siglock = __SPIN_LOCK_UNLOCKED(sighand.siglock), \ - .signalfd_list = LIST_HEAD_INIT(sighand.signalfd_list), \ + .signalfd_wqh = __WAIT_QUEUE_HEAD_INITIALIZER(sighand.signalfd_wqh), \ } extern struct group_info init_groups; diff --git a/include/linux/sched.h b/include/linux/sched.h index 3de79016f2a6..a01ac6dd5f5e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -438,7 +438,7 @@ struct sighand_struct { atomic_t count; struct k_sigaction action[_NSIG]; spinlock_t siglock; - struct list_head signalfd_list; + wait_queue_head_t signalfd_wqh; }; struct pacct_struct { diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index 510429495690..4c9ff0910ae0 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -45,49 +45,17 @@ struct signalfd_siginfo { #ifdef CONFIG_SIGNALFD /* - * Deliver the signal to listening signalfd. This must be called - * with the sighand lock held. Same are the following that end up - * calling signalfd_deliver(). - */ -void signalfd_deliver(struct task_struct *tsk, int sig); - -/* - * No need to fall inside signalfd_deliver() if no signal listeners - * are available. + * Deliver the signal to listening signalfd. */ static inline void signalfd_notify(struct task_struct *tsk, int sig) { - if (unlikely(!list_empty(&tsk->sighand->signalfd_list))) - signalfd_deliver(tsk, sig); -} - -/* - * The signal -1 is used to notify the signalfd that the sighand - * is on its way to be detached. - */ -static inline void signalfd_detach_locked(struct task_struct *tsk) -{ - if (unlikely(!list_empty(&tsk->sighand->signalfd_list))) - signalfd_deliver(tsk, -1); -} - -static inline void signalfd_detach(struct task_struct *tsk) -{ - struct sighand_struct *sighand = tsk->sighand; - - if (unlikely(!list_empty(&sighand->signalfd_list))) { - spin_lock_irq(&sighand->siglock); - signalfd_deliver(tsk, -1); - spin_unlock_irq(&sighand->siglock); - } + if (unlikely(waitqueue_active(&tsk->sighand->signalfd_wqh))) + wake_up(&tsk->sighand->signalfd_wqh); } #else /* CONFIG_SIGNALFD */ -#define signalfd_deliver(t, s) do { } while (0) -#define signalfd_notify(t, s) do { } while (0) -#define signalfd_detach_locked(t) do { } while (0) -#define signalfd_detach(t) do { } while (0) +static inline void signalfd_notify(struct task_struct *tsk, int sig) { } #endif /* CONFIG_SIGNALFD */ diff --git a/kernel/exit.c b/kernel/exit.c index 06b24b3aa370..993369ee94d1 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -86,14 +85,6 @@ static void __exit_signal(struct task_struct *tsk) sighand = rcu_dereference(tsk->sighand); spin_lock(&sighand->siglock); - /* - * Notify that this sighand has been detached. This must - * be called with the tsk->sighand lock held. Also, this - * access tsk->sighand internally, so it must be called - * before tsk->sighand is reset. - */ - signalfd_detach_locked(tsk); - posix_cpu_timers_exit(tsk); if (atomic_dec_and_test(&sig->count)) posix_cpu_timers_exit_group(tsk); diff --git a/kernel/fork.c b/kernel/fork.c index 7332e236d367..33f12f48684a 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1438,7 +1438,7 @@ static void sighand_ctor(void *data, struct kmem_cache *cachep, struct sighand_struct *sighand = data; spin_lock_init(&sighand->siglock); - INIT_LIST_HEAD(&sighand->signalfd_list); + init_waitqueue_head(&sighand->signalfd_wqh); } void __init proc_caches_init(void) diff --git a/kernel/signal.c b/kernel/signal.c index 3169bed0b4d0..9fb91a32edda 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -378,8 +378,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) /* We only dequeue private signals from ourselves, we don't let * signalfd steal them */ - if (likely(tsk == current)) - signr = __dequeue_signal(&tsk->pending, mask, info); + signr = __dequeue_signal(&tsk->pending, mask, info); if (!signr) { signr = __dequeue_signal(&tsk->signal->shared_pending, mask, info); @@ -407,8 +406,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) } } } - if (likely(tsk == current)) - recalc_sigpending(); + recalc_sigpending(); if (signr && unlikely(sig_kernel_stop(signr))) { /* * Set a marker that we have dequeued a stop signal. Our @@ -425,7 +423,7 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info) if (!(tsk->signal->flags & SIGNAL_GROUP_EXIT)) tsk->signal->flags |= SIGNAL_STOP_DEQUEUED; } - if (signr && likely(tsk == current) && + if (signr && ((info->si_code & __SI_MASK) == __SI_TIMER) && info->si_sys_private){ /* -- cgit v1.2.3-58-ga151 From ed2ba977d43a6031f78f9e49d739ef5094f512e4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 20 Sep 2007 12:06:10 -0700 Subject: [PATCH] missing null termination in power supply uevent Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: Stephen Hemminger --- drivers/power/power_supply_sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c7c4574729b1..de3155b21285 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -289,6 +289,7 @@ int power_supply_uevent(struct device *dev, char **envp, int num_envp, if (ret) goto out; } + envp[i] = NULL; out: free_page((unsigned long)prop_buf); -- cgit v1.2.3-58-ga151 From 415cb800375cc4e89fb5a6a454e484bd4adbffb4 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Sun, 16 Sep 2007 20:10:16 -0700 Subject: ocfs2: Allow smaller allocations during large writes The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 4 ++-- fs/ocfs2/localalloc.c | 4 +--- fs/ocfs2/localalloc.h | 2 +- fs/ocfs2/suballoc.c | 29 +++++++++++++++++++++-------- fs/ocfs2/suballoc.h | 11 +++++++++++ 5 files changed, 36 insertions(+), 14 deletions(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 7e34e66159c6..f3bc3658e7a5 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -491,8 +491,8 @@ int ocfs2_do_extend_allocation(struct ocfs2_super *osb, goto leave; } - status = ocfs2_claim_clusters(osb, handle, data_ac, 1, - &bit_off, &num_bits); + status = __ocfs2_claim_clusters(osb, handle, data_ac, 1, + clusters_to_add, &bit_off, &num_bits); if (status < 0) { if (status != -ENOSPC) mlog_errno(status); diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index 545f7892cdf3..de984d272576 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -524,13 +524,12 @@ bail: int ocfs2_claim_local_alloc_bits(struct ocfs2_super *osb, handle_t *handle, struct ocfs2_alloc_context *ac, - u32 min_bits, + u32 bits_wanted, u32 *bit_off, u32 *num_bits) { int status, start; struct inode *local_alloc_inode; - u32 bits_wanted; void *bitmap; struct ocfs2_dinode *alloc; struct ocfs2_local_alloc *la; @@ -538,7 +537,6 @@ int ocfs2_claim_local_alloc_bits(struct ocfs2_super *osb, mlog_entry_void(); BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL); - bits_wanted = ac->ac_bits_wanted - ac->ac_bits_given; local_alloc_inode = ac->ac_inode; alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; la = OCFS2_LOCAL_ALLOC(alloc); diff --git a/fs/ocfs2/localalloc.h b/fs/ocfs2/localalloc.h index 385a10152f9c..3f76631e110c 100644 --- a/fs/ocfs2/localalloc.h +++ b/fs/ocfs2/localalloc.h @@ -48,7 +48,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, int ocfs2_claim_local_alloc_bits(struct ocfs2_super *osb, handle_t *handle, struct ocfs2_alloc_context *ac, - u32 min_bits, + u32 bits_wanted, u32 *bit_off, u32 *num_bits); diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c index d9c5c9fcb30f..8f09f5235e3a 100644 --- a/fs/ocfs2/suballoc.c +++ b/fs/ocfs2/suballoc.c @@ -1486,21 +1486,21 @@ static inline void ocfs2_block_to_cluster_group(struct inode *inode, * contig. allocation, set to '1' to indicate we can deal with extents * of any size. */ -int ocfs2_claim_clusters(struct ocfs2_super *osb, - handle_t *handle, - struct ocfs2_alloc_context *ac, - u32 min_clusters, - u32 *cluster_start, - u32 *num_clusters) +int __ocfs2_claim_clusters(struct ocfs2_super *osb, + handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 min_clusters, + u32 max_clusters, + u32 *cluster_start, + u32 *num_clusters) { int status; - unsigned int bits_wanted = ac->ac_bits_wanted - ac->ac_bits_given; + unsigned int bits_wanted = max_clusters; u64 bg_blkno = 0; u16 bg_bit_off; mlog_entry_void(); - BUG_ON(!ac); BUG_ON(ac->ac_bits_given >= ac->ac_bits_wanted); BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL @@ -1557,6 +1557,19 @@ bail: return status; } +int ocfs2_claim_clusters(struct ocfs2_super *osb, + handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 min_clusters, + u32 *cluster_start, + u32 *num_clusters) +{ + unsigned int bits_wanted = ac->ac_bits_wanted - ac->ac_bits_given; + + return __ocfs2_claim_clusters(osb, handle, ac, min_clusters, + bits_wanted, cluster_start, num_clusters); +} + static inline int ocfs2_block_group_clear_bits(handle_t *handle, struct inode *alloc_inode, struct ocfs2_group_desc *bg, diff --git a/fs/ocfs2/suballoc.h b/fs/ocfs2/suballoc.h index f212dc01a84b..cafe93703095 100644 --- a/fs/ocfs2/suballoc.h +++ b/fs/ocfs2/suballoc.h @@ -85,6 +85,17 @@ int ocfs2_claim_clusters(struct ocfs2_super *osb, u32 min_clusters, u32 *cluster_start, u32 *num_clusters); +/* + * Use this variant of ocfs2_claim_clusters to specify a maxiumum + * number of clusters smaller than the allocation reserved. + */ +int __ocfs2_claim_clusters(struct ocfs2_super *osb, + handle_t *handle, + struct ocfs2_alloc_context *ac, + u32 min_clusters, + u32 max_clusters, + u32 *cluster_start, + u32 *num_clusters); int ocfs2_free_suballoc_bits(handle_t *handle, struct inode *alloc_inode, -- cgit v1.2.3-58-ga151 From db56246c6980e376b02d2da568d119da71f82fb9 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Mon, 17 Sep 2007 09:06:29 -0700 Subject: ocfs2: Fix pos/len passed to ocfs2_write_cluster This was broken for file systems whose cluster size is greater than page size. Pos needs to be incremented as we loop through the descriptors, and len needs to be capped to the size of a single cluster. Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 50cd8a209012..fa43810e5970 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -1211,18 +1211,33 @@ static int ocfs2_write_cluster_by_desc(struct address_space *mapping, loff_t pos, unsigned len) { int ret, i; + loff_t cluster_off; + unsigned int local_len = len; struct ocfs2_write_cluster_desc *desc; + struct ocfs2_super *osb = OCFS2_SB(mapping->host->i_sb); for (i = 0; i < wc->w_clen; i++) { desc = &wc->w_desc[i]; + /* + * We have to make sure that the total write passed in + * doesn't extend past a single cluster. + */ + local_len = len; + cluster_off = pos & (osb->s_clustersize - 1); + if ((cluster_off + local_len) > osb->s_clustersize) + local_len = osb->s_clustersize - cluster_off; + ret = ocfs2_write_cluster(mapping, desc->c_phys, desc->c_unwritten, data_ac, meta_ac, - wc, desc->c_cpos, pos, len); + wc, desc->c_cpos, pos, local_len); if (ret) { mlog_errno(ret); goto out; } + + len -= local_len; + pos += local_len; } ret = 0; -- cgit v1.2.3-58-ga151 From 5c26a7b70f89c36e8d9acc95cb896c3cd205fc8d Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Tue, 18 Sep 2007 17:49:29 -0700 Subject: ocfs2: Don't double set write parameters The target page offsets were being incorrectly set a second time in ocfs2_prepare_page_for_write(), which was causing problems on a 16k page size kernel. Additionally, ocfs2_write_failure() was incorrectly using those parameters instead of the parameters for the individual page being cleaned up. Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index fa43810e5970..f37f25c931f5 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -930,18 +930,11 @@ static void ocfs2_write_failure(struct inode *inode, loff_t user_pos, unsigned user_len) { int i; - unsigned from, to; + unsigned from = user_pos & (PAGE_CACHE_SIZE - 1), + to = user_pos + user_len; struct page *tmppage; - ocfs2_zero_new_buffers(wc->w_target_page, user_pos, user_len); - - if (wc->w_large_pages) { - from = wc->w_target_from; - to = wc->w_target_to; - } else { - from = 0; - to = PAGE_CACHE_SIZE; - } + ocfs2_zero_new_buffers(wc->w_target_page, from, to); for(i = 0; i < wc->w_num_pages; i++) { tmppage = wc->w_pages[i]; @@ -991,9 +984,6 @@ static int ocfs2_prepare_page_for_write(struct inode *inode, u64 *p_blkno, map_from = cluster_start; map_to = cluster_end; } - - wc->w_target_from = map_from; - wc->w_target_to = map_to; } else { /* * If we haven't allocated the new page yet, we -- cgit v1.2.3-58-ga151 From 813d974c53a2b353566a86bb127625b403696dae Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Thu, 20 Sep 2007 10:59:48 -0700 Subject: ocfs2: Pack vote message and response structures The ocfs2_vote_msg and ocfs2_response_msg structs needed to be packed to ensure similar sizeofs in 32-bit and 64-bit arches. Without this, we had inadvertantly broken 32/64 bit cross mounts. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/vote.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/vote.c b/fs/ocfs2/vote.c index 66a13ee63d4c..c05358538f2b 100644 --- a/fs/ocfs2/vote.c +++ b/fs/ocfs2/vote.c @@ -66,7 +66,7 @@ struct ocfs2_vote_msg { struct ocfs2_msg_hdr v_hdr; __be32 v_reserved1; -}; +} __attribute__ ((packed)); /* Responses are given these values to maintain backwards * compatibility with older ocfs2 versions */ @@ -78,7 +78,7 @@ struct ocfs2_response_msg { struct ocfs2_msg_hdr r_hdr; __be32 r_response; -}; +} __attribute__ ((packed)); struct ocfs2_vote_work { struct list_head w_list; -- cgit v1.2.3-58-ga151 From f216cc3748a3a22c2b99390fddcdafa0583791a2 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 20 Sep 2007 21:32:35 +0400 Subject: ACPI: suspend: consolidate handling of Sx states. Recent changes to sleep initialization in ACPI dropped reporting of supported Sx states above S3. Fix that and also move S5 init into same file as other Sx. The only functional change is adding printk() for S4 and S5 cases. Signed-off-by: Alexey Starikovskiy Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/Makefile | 2 +- drivers/acpi/sleep/main.c | 53 +++++++++++++++++++++++++++--- drivers/acpi/sleep/poweroff.c | 75 ------------------------------------------- 3 files changed, 49 insertions(+), 81 deletions(-) delete mode 100644 drivers/acpi/sleep/poweroff.c diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile index 195a4f69c0f7..ba9bd403d443 100644 --- a/drivers/acpi/sleep/Makefile +++ b/drivers/acpi/sleep/Makefile @@ -1,4 +1,4 @@ -obj-y := poweroff.o wakeup.o +obj-y := wakeup.o obj-$(CONFIG_ACPI_SLEEP) += main.o obj-$(CONFIG_ACPI_SLEEP) += proc.o diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index c52ade816fb4..638172fe6825 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -15,6 +15,9 @@ #include #include #include + +#include + #include #include #include "sleep.h" @@ -57,6 +60,27 @@ static int acpi_pm_set_target(suspend_state_t pm_state) return error; } +int acpi_sleep_prepare(u32 acpi_state) +{ +#ifdef CONFIG_ACPI_SLEEP + /* do we have a wakeup address for S2 and S3? */ + if (acpi_state == ACPI_STATE_S3) { + if (!acpi_wakeup_address) { + return -EFAULT; + } + acpi_set_firmware_waking_vector((acpi_physical_address) + virt_to_phys((void *) + acpi_wakeup_address)); + + } + ACPI_FLUSH_CPU_CACHE(); + acpi_enable_wakeup_device_prep(acpi_state); +#endif + acpi_gpe_sleep_prepare(acpi_state); + acpi_enter_sleep_state_prep(acpi_state); + return 0; +} + /** * acpi_pm_prepare - Do preliminary suspend work. * @pm_state: ignored @@ -350,6 +374,20 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) return d_max; } +static void acpi_power_off_prepare(void) +{ + /* Prepare to power off the system */ + acpi_sleep_prepare(ACPI_STATE_S5); +} + +static void acpi_power_off(void) +{ + /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ + printk("%s called\n", __FUNCTION__); + local_irq_disable(); + acpi_enter_sleep_state(ACPI_STATE_S5); +} + int __init acpi_sleep_init(void) { acpi_status status; @@ -363,8 +401,8 @@ int __init acpi_sleep_init(void) if (acpi_disabled) return 0; +printk(KERN_INFO PREFIX "(supports"); #ifdef CONFIG_SUSPEND - printk(KERN_INFO PREFIX "(supports"); for (i = ACPI_STATE_S0; i < ACPI_STATE_S4; i++) { status = acpi_get_sleep_type_data(i, &type_a, &type_b); if (ACPI_SUCCESS(status)) { @@ -372,7 +410,6 @@ int __init acpi_sleep_init(void) printk(" S%d", i); } } - printk(")\n"); pm_set_ops(&acpi_pm_ops); #endif @@ -382,10 +419,16 @@ int __init acpi_sleep_init(void) if (ACPI_SUCCESS(status)) { hibernation_set_ops(&acpi_hibernation_ops); sleep_states[ACPI_STATE_S4] = 1; + printk(" S4"); } -#else - sleep_states[ACPI_STATE_S4] = 0; #endif - + status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); + if (ACPI_SUCCESS(status)) { + sleep_states[ACPI_STATE_S5] = 1; + printk(" S5"); + pm_power_off_prepare = acpi_power_off_prepare; + pm_power_off = acpi_power_off; + } + printk(")\n"); return 0; } diff --git a/drivers/acpi/sleep/poweroff.c b/drivers/acpi/sleep/poweroff.c deleted file mode 100644 index 39e40d56b034..000000000000 --- a/drivers/acpi/sleep/poweroff.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * poweroff.c - ACPI handler for powering off the system. - * - * AKA S5, but it is independent of whether or not the kernel supports - * any other sleep support in the system. - * - * Copyright (c) 2005 Alexey Starikovskiy - * - * This file is released under the GPLv2. - */ - -#include -#include -#include -#include -#include -#include "sleep.h" - -int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - acpi_gpe_sleep_prepare(acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - -#ifdef CONFIG_PM - -static void acpi_power_off_prepare(void) -{ - /* Prepare to power off the system */ - acpi_sleep_prepare(ACPI_STATE_S5); -} - -static void acpi_power_off(void) -{ - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ - printk("%s called\n", __FUNCTION__); - local_irq_disable(); - /* Some SMP machines only can poweroff in boot CPU */ - acpi_enter_sleep_state(ACPI_STATE_S5); -} - -static int acpi_poweroff_init(void) -{ - if (!acpi_disabled) { - u8 type_a, type_b; - acpi_status status; - - status = - acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - pm_power_off_prepare = acpi_power_off_prepare; - pm_power_off = acpi_power_off; - } - } - return 0; -} - -late_initcall(acpi_poweroff_init); - -#endif /* CONFIG_PM */ -- cgit v1.2.3-58-ga151 From efe870f9f4ad74410a18ecbf0d9ba7c14b50a0fb Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 18 Sep 2007 22:00:52 -0500 Subject: [PATCH] softmac: Fix inability to associate with WEP networks Commit 4cf92a3c was submitted as a fix for bug #8686 at bugzilla.kernel.org (http://bugzilla.kernel.org/show_bug.cgi?id=8686). Unfortunately, the fix led to a new bug, reported by Yoshifuji Hideaki, that prevented association for WEP encrypted networks that use ifconfig to control the device. This patch effectively reverts the earlier commit and does a proper fix for bug #8686. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- net/ieee80211/softmac/ieee80211softmac_assoc.c | 2 - net/ieee80211/softmac/ieee80211softmac_wx.c | 54 ++++++++++---------------- 2 files changed, 20 insertions(+), 36 deletions(-) diff --git a/net/ieee80211/softmac/ieee80211softmac_assoc.c b/net/ieee80211/softmac/ieee80211softmac_assoc.c index afb6c6698b27..e475f2e1be13 100644 --- a/net/ieee80211/softmac/ieee80211softmac_assoc.c +++ b/net/ieee80211/softmac/ieee80211softmac_assoc.c @@ -273,8 +273,6 @@ ieee80211softmac_assoc_work(struct work_struct *work) ieee80211softmac_notify(mac->dev, IEEE80211SOFTMAC_EVENT_SCAN_FINISHED, ieee80211softmac_assoc_notify_scan, NULL); if (ieee80211softmac_start_scan(mac)) { dprintk(KERN_INFO PFX "Associate: failed to initiate scan. Is device up?\n"); - mac->associnfo.associating = 0; - mac->associnfo.associated = 0; } goto out; } else { diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c index d054e9224b3e..442b9875f3fb 100644 --- a/net/ieee80211/softmac/ieee80211softmac_wx.c +++ b/net/ieee80211/softmac/ieee80211softmac_wx.c @@ -70,44 +70,30 @@ ieee80211softmac_wx_set_essid(struct net_device *net_dev, char *extra) { struct ieee80211softmac_device *sm = ieee80211_priv(net_dev); - struct ieee80211softmac_network *n; struct ieee80211softmac_auth_queue_item *authptr; int length = 0; check_assoc_again: mutex_lock(&sm->associnfo.mutex); - /* Check if we're already associating to this or another network - * If it's another network, cancel and start over with our new network - * If it's our network, ignore the change, we're already doing it! - */ if((sm->associnfo.associating || sm->associnfo.associated) && (data->essid.flags && data->essid.length)) { - /* Get the associating network */ - n = ieee80211softmac_get_network_by_bssid(sm, sm->associnfo.bssid); - if(n && n->essid.len == data->essid.length && - !memcmp(n->essid.data, extra, n->essid.len)) { - dprintk(KERN_INFO PFX "Already associating or associated to "MAC_FMT"\n", - MAC_ARG(sm->associnfo.bssid)); - goto out; - } else { - dprintk(KERN_INFO PFX "Canceling existing associate request!\n"); - /* Cancel assoc work */ - cancel_delayed_work(&sm->associnfo.work); - /* We don't have to do this, but it's a little cleaner */ - list_for_each_entry(authptr, &sm->auth_queue, list) - cancel_delayed_work(&authptr->work); - sm->associnfo.bssvalid = 0; - sm->associnfo.bssfixed = 0; - sm->associnfo.associating = 0; - sm->associnfo.associated = 0; - /* We must unlock to avoid deadlocks with the assoc workqueue - * on the associnfo.mutex */ - mutex_unlock(&sm->associnfo.mutex); - flush_scheduled_work(); - /* Avoid race! Check assoc status again. Maybe someone started an - * association while we flushed. */ - goto check_assoc_again; - } + dprintk(KERN_INFO PFX "Canceling existing associate request!\n"); + /* Cancel assoc work */ + cancel_delayed_work(&sm->associnfo.work); + /* We don't have to do this, but it's a little cleaner */ + list_for_each_entry(authptr, &sm->auth_queue, list) + cancel_delayed_work(&authptr->work); + sm->associnfo.bssvalid = 0; + sm->associnfo.bssfixed = 0; + sm->associnfo.associating = 0; + sm->associnfo.associated = 0; + /* We must unlock to avoid deadlocks with the assoc workqueue + * on the associnfo.mutex */ + mutex_unlock(&sm->associnfo.mutex); + flush_scheduled_work(); + /* Avoid race! Check assoc status again. Maybe someone started an + * association while we flushed. */ + goto check_assoc_again; } sm->associnfo.static_essid = 0; @@ -153,13 +139,13 @@ ieee80211softmac_wx_get_essid(struct net_device *net_dev, data->essid.length = sm->associnfo.req_essid.len; data->essid.flags = 1; /* active */ memcpy(extra, sm->associnfo.req_essid.data, sm->associnfo.req_essid.len); - } - + dprintk(KERN_INFO PFX "Getting essid from req_essid\n"); + } else if (sm->associnfo.associated || sm->associnfo.associating) { /* If we're associating/associated, return that */ - if (sm->associnfo.associated || sm->associnfo.associating) { data->essid.length = sm->associnfo.associate_essid.len; data->essid.flags = 1; /* active */ memcpy(extra, sm->associnfo.associate_essid.data, sm->associnfo.associate_essid.len); + dprintk(KERN_INFO PFX "Getting essid from associate_essid\n"); } mutex_unlock(&sm->associnfo.mutex); -- cgit v1.2.3-58-ga151 From d59952d532ed8fc93ccb98186f73d9ce5cfcb93d Mon Sep 17 00:00:00 2001 From: Jean Tourrilhes Date: Thu, 20 Sep 2007 11:08:18 -0700 Subject: [PATCH] WE : Add missing auth compat-ioctl Johannes just found that we are missing a compat-ioctl declaration. The fix is trivial. As previous patches for compat-ioctl, this should also go to stable. More info : http://marc.info/?l=linux-wireless&m=119029667902588&w=2 Signed-off-by: Jean Tourrilhes Signed-off-by: John W. Linville --- fs/compat_ioctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 5a5b7116cefb..37310b0e8107 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -3190,6 +3190,8 @@ COMPATIBLE_IOCTL(SIOCSIWRETRY) COMPATIBLE_IOCTL(SIOCGIWRETRY) COMPATIBLE_IOCTL(SIOCSIWPOWER) COMPATIBLE_IOCTL(SIOCGIWPOWER) +COMPATIBLE_IOCTL(SIOCSIWAUTH) +COMPATIBLE_IOCTL(SIOCGIWAUTH) /* hiddev */ COMPATIBLE_IOCTL(HIDIOCGVERSION) COMPATIBLE_IOCTL(HIDIOCAPPLICATION) -- cgit v1.2.3-58-ga151 From 176df2457ef6207156ca1a40991c54ca01fef567 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 21 Sep 2007 16:16:18 +0200 Subject: x86_64: Zero extend all registers after ptrace in 32bit entry path. Strictly it's only needed for eax. It actually does a little more than strictly needed -- the other registers are already zero extended. Also remove the now unnecessary and non functional compat task check in ptrace. This is CVE-2007-4573 Found by Wojciech Purczynski Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/ia32/ia32entry.S | 18 +++++++++++++++--- arch/x86_64/kernel/ptrace.c | 4 ---- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S index 938278697e20..18b231810908 100644 --- a/arch/x86_64/ia32/ia32entry.S +++ b/arch/x86_64/ia32/ia32entry.S @@ -38,6 +38,18 @@ movq %rax,R8(%rsp) .endm + .macro LOAD_ARGS32 offset + movl \offset(%rsp),%r11d + movl \offset+8(%rsp),%r10d + movl \offset+16(%rsp),%r9d + movl \offset+24(%rsp),%r8d + movl \offset+40(%rsp),%ecx + movl \offset+48(%rsp),%edx + movl \offset+56(%rsp),%esi + movl \offset+64(%rsp),%edi + movl \offset+72(%rsp),%eax + .endm + .macro CFI_STARTPROC32 simple CFI_STARTPROC \simple CFI_UNDEFINED r8 @@ -152,7 +164,7 @@ sysenter_tracesys: movq $-ENOSYS,RAX(%rsp) /* really needed? */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST movl %ebp, %ebp /* no need to do an access_ok check here because rbp has been @@ -255,7 +267,7 @@ cstar_tracesys: movq $-ENOSYS,RAX(%rsp) /* really needed? */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST movl RSP-ARGOFFSET(%rsp), %r8d /* no need to do an access_ok check here because r8 has been @@ -334,7 +346,7 @@ ia32_tracesys: movq $-ENOSYS,RAX(%rsp) /* really needed? */ movq %rsp,%rdi /* &pt_regs -> arg1 */ call syscall_trace_enter - LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ + LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST jmp ia32_do_syscall END(ia32_syscall) diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c index e83cc67155ac..eea3702427b4 100644 --- a/arch/x86_64/kernel/ptrace.c +++ b/arch/x86_64/kernel/ptrace.c @@ -232,10 +232,6 @@ static int putreg(struct task_struct *child, { unsigned long tmp; - /* Some code in the 64bit emulation may not be 64bit clean. - Don't take any chances. */ - if (test_tsk_thread_flag(child, TIF_IA32)) - value &= 0xffffffff; switch (regno) { case offsetof(struct user_regs_struct,fs): if (value && (value & 3) != 3) -- cgit v1.2.3-58-ga151 From 339c3a6a12faf57c57a23f3d714ce89a831822fc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 21 Sep 2007 08:59:07 +0100 Subject: [MIPS] BCM1480: Export zbbus_mhz. Symbol is required by the ZBus profiler. Signed-off-by: Ralf Baechle --- arch/mips/sibyte/bcm1480/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c index bb28f28e8042..f2eefbe99916 100644 --- a/arch/mips/sibyte/bcm1480/setup.c +++ b/arch/mips/sibyte/bcm1480/setup.c @@ -35,6 +35,7 @@ unsigned int soc_type; EXPORT_SYMBOL(soc_type); unsigned int periph_rev; unsigned int zbbus_mhz; +EXPORT_SYMBOL(zbbus_mhz); static unsigned int part_type; -- cgit v1.2.3-58-ga151 From da51f9e10c48599bff498b378d040c4063adfe9d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 21 Sep 2007 09:01:15 +0100 Subject: [MIPS] BCM1480: include . Signed-off-by: Ralf Baechle --- arch/mips/sibyte/bcm1480/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c index f2eefbe99916..7e1aa348b8e0 100644 --- a/arch/mips/sibyte/bcm1480/setup.c +++ b/arch/mips/sibyte/bcm1480/setup.c @@ -15,6 +15,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ +#include #include #include #include -- cgit v1.2.3-58-ga151 From da8f153e51290e7438ba7da66234a864e5d3e1c1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Sep 2007 12:09:41 -0700 Subject: Revert "x86_64: Quicklist support for x86_64" This reverts commit 34feb2c83beb3bdf13535a36770f7e50b47ef299. Suresh Siddha points out that this one breaks the fundamental requirement that you cannot free page table pages before the TLB caches are flushed. The quicklists do not give the same kinds of guarantees that the mmu_gather structure does, at least not in NUMA configurations. Requested-by: Suresh Siddha Acked-by: Andi Kleen Cc: Andrew Morton Cc: Christoph Lameter Cc: Asit Mallick Cc: Tony Luck Signed-off-by: Linus Torvalds --- arch/x86_64/Kconfig | 8 ----- arch/x86_64/kernel/process.c | 1 - arch/x86_64/kernel/smp.c | 2 +- include/asm-x86_64/pgalloc.h | 73 +++++++++++++++----------------------------- include/asm-x86_64/pgtable.h | 1 + 5 files changed, 26 insertions(+), 59 deletions(-) diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index ffa036406289..b4d9089a6a06 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -60,14 +60,6 @@ config ZONE_DMA bool default y -config QUICKLIST - bool - default y - -config NR_QUICK - int - default 2 - config ISA bool diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 2842f50cbe3f..98956555450b 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -208,7 +208,6 @@ void cpu_idle (void) if (__get_cpu_var(cpu_idle_state)) __get_cpu_var(cpu_idle_state) = 0; - check_pgt_cache(); rmb(); idle = pm_idle; if (!idle) diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 673a300b5944..df4a82812adb 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -241,7 +241,7 @@ void flush_tlb_mm (struct mm_struct * mm) } if (!cpus_empty(cpu_mask)) flush_tlb_others(cpu_mask, mm, FLUSH_ALL); - check_pgt_cache(); + preempt_enable(); } EXPORT_SYMBOL(flush_tlb_mm); diff --git a/include/asm-x86_64/pgalloc.h b/include/asm-x86_64/pgalloc.h index b467be6d367f..8bb564687860 100644 --- a/include/asm-x86_64/pgalloc.h +++ b/include/asm-x86_64/pgalloc.h @@ -4,10 +4,6 @@ #include #include #include -#include - -#define QUICK_PGD 0 /* We preserve special mappings over free */ -#define QUICK_PT 1 /* Other page table pages that are zero on free */ #define pmd_populate_kernel(mm, pmd, pte) \ set_pmd(pmd, __pmd(_PAGE_TABLE | __pa(pte))) @@ -24,23 +20,23 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *p static inline void pmd_free(pmd_t *pmd) { BUG_ON((unsigned long)pmd & (PAGE_SIZE-1)); - quicklist_free(QUICK_PT, NULL, pmd); + free_page((unsigned long)pmd); } static inline pmd_t *pmd_alloc_one (struct mm_struct *mm, unsigned long addr) { - return (pmd_t *)quicklist_alloc(QUICK_PT, GFP_KERNEL|__GFP_REPEAT, NULL); + return (pmd_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); } static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { - return (pud_t *)quicklist_alloc(QUICK_PT, GFP_KERNEL|__GFP_REPEAT, NULL); + return (pud_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); } static inline void pud_free (pud_t *pud) { BUG_ON((unsigned long)pud & (PAGE_SIZE-1)); - quicklist_free(QUICK_PT, NULL, pud); + free_page((unsigned long)pud); } static inline void pgd_list_add(pgd_t *pgd) @@ -61,57 +57,41 @@ static inline void pgd_list_del(pgd_t *pgd) spin_unlock(&pgd_lock); } -static inline void pgd_ctor(void *x) +static inline pgd_t *pgd_alloc(struct mm_struct *mm) { unsigned boundary; - pgd_t *pgd = x; - struct page *page = virt_to_page(pgd); - + pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); + if (!pgd) + return NULL; + pgd_list_add(pgd); /* * Copy kernel pointers in from init. + * Could keep a freelist or slab cache of those because the kernel + * part never changes. */ boundary = pgd_index(__PAGE_OFFSET); + memset(pgd, 0, boundary * sizeof(pgd_t)); memcpy(pgd + boundary, - init_level4_pgt + boundary, - (PTRS_PER_PGD - boundary) * sizeof(pgd_t)); - - spin_lock(&pgd_lock); - list_add(&page->lru, &pgd_list); - spin_unlock(&pgd_lock); -} - -static inline void pgd_dtor(void *x) -{ - pgd_t *pgd = x; - struct page *page = virt_to_page(pgd); - - spin_lock(&pgd_lock); - list_del(&page->lru); - spin_unlock(&pgd_lock); -} - -static inline pgd_t *pgd_alloc(struct mm_struct *mm) -{ - pgd_t *pgd = (pgd_t *)quicklist_alloc(QUICK_PGD, - GFP_KERNEL|__GFP_REPEAT, pgd_ctor); + init_level4_pgt + boundary, + (PTRS_PER_PGD - boundary) * sizeof(pgd_t)); return pgd; } static inline void pgd_free(pgd_t *pgd) { BUG_ON((unsigned long)pgd & (PAGE_SIZE-1)); - quicklist_free(QUICK_PGD, pgd_dtor, pgd); + pgd_list_del(pgd); + free_page((unsigned long)pgd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - return (pte_t *)quicklist_alloc(QUICK_PT, GFP_KERNEL|__GFP_REPEAT, NULL); + return (pte_t *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); } static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address) { - void *p = (void *)quicklist_alloc(QUICK_PT, GFP_KERNEL|__GFP_REPEAT, NULL); - + void *p = (void *)get_zeroed_page(GFP_KERNEL|__GFP_REPEAT); if (!p) return NULL; return virt_to_page(p); @@ -123,22 +103,17 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm, unsigned long add static inline void pte_free_kernel(pte_t *pte) { BUG_ON((unsigned long)pte & (PAGE_SIZE-1)); - quicklist_free(QUICK_PT, NULL, pte); + free_page((unsigned long)pte); } static inline void pte_free(struct page *pte) { - quicklist_free_page(QUICK_PT, NULL, pte); -} + __free_page(pte); +} -#define __pte_free_tlb(tlb,pte) quicklist_free_page(QUICK_PT, NULL,(pte)) +#define __pte_free_tlb(tlb,pte) tlb_remove_page((tlb),(pte)) -#define __pmd_free_tlb(tlb,x) quicklist_free(QUICK_PT, NULL, (x)) -#define __pud_free_tlb(tlb,x) quicklist_free(QUICK_PT, NULL, (x)) +#define __pmd_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x)) +#define __pud_free_tlb(tlb,x) tlb_remove_page((tlb),virt_to_page(x)) -static inline void check_pgt_cache(void) -{ - quicklist_trim(QUICK_PGD, pgd_dtor, 25, 16); - quicklist_trim(QUICK_PT, NULL, 25, 16); -} #endif /* _X86_64_PGALLOC_H */ diff --git a/include/asm-x86_64/pgtable.h b/include/asm-x86_64/pgtable.h index c9d8764c89d1..57dd6b3107ea 100644 --- a/include/asm-x86_64/pgtable.h +++ b/include/asm-x86_64/pgtable.h @@ -411,6 +411,7 @@ pte_t *lookup_address(unsigned long addr); #define HAVE_ARCH_UNMAPPED_AREA #define pgtable_cache_init() do { } while (0) +#define check_pgt_cache() do { } while (0) #define PAGE_AGP PAGE_KERNEL_NOCACHE #define HAVE_PAGE_AGP 1 -- cgit v1.2.3-58-ga151 From 5a50fe709d527f31169263e36601dd83446d5744 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Thu, 20 Sep 2007 22:27:44 +0200 Subject: ACPI: suspend: consolidate handling of Sx states addendum Make the S0 state be always reported as supported Signed-off: Frans Pop Acked-by: Alexey Starikovskiy Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 638172fe6825..85633c585aab 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -401,9 +401,11 @@ int __init acpi_sleep_init(void) if (acpi_disabled) return 0; -printk(KERN_INFO PREFIX "(supports"); + sleep_states[ACPI_STATE_S0] = 1; + printk(KERN_INFO PREFIX "(supports S0"); + #ifdef CONFIG_SUSPEND - for (i = ACPI_STATE_S0; i < ACPI_STATE_S4; i++) { + for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { status = acpi_get_sleep_type_data(i, &type_a, &type_b); if (ACPI_SUCCESS(status)) { sleep_states[i] = 1; -- cgit v1.2.3-58-ga151 From 2302827c95fe0f441025acd5133e532d2eef322b Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sat, 22 Sep 2007 08:40:09 -0500 Subject: [SCSI] scsi_transport_spi: fix domain validation failure from incorrect width setting Domain Validation in the SPI transport class is failing on boxes with damaged cables (and failing to the extent that the box hangs). The problem is that the first test it does is a cable integrity test for wide transfers and if this fails, it turns the wide bit off. The problem is that the next set of tests it does turns wide back on again, with the result that it runs through the entirety of DV with a known bad setting and then hangs the system. The attached patch fixes the problem by physically nailing the wide setting to what it deduces it should be for the whole of Domain Validation. Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 6f56f8750635..4df21c92ff1e 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) struct scsi_target *starget = sdev->sdev_target; struct Scsi_Host *shost = sdev->host; int len = sdev->inquiry_len; + int min_period = spi_min_period(starget); + int max_width = spi_max_width(starget); /* first set us up for narrow async */ DV_SET(offset, 0); DV_SET(width, 0); - + if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n"); @@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) return; } + if (!scsi_device_wide(sdev)) { + spi_max_width(starget) = 0; + max_width = 0; + } + /* test width */ - if (i->f->set_width && spi_max_width(starget) && - scsi_device_wide(sdev)) { + if (i->f->set_width && max_width) { i->f->set_width(starget, 1); if (spi_dv_device_compare_inquiry(sdev, buffer, @@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n"); i->f->set_width(starget, 0); + /* Make sure we don't force wide back on by asking + * for a transfer period that requires it */ + max_width = 0; + if (min_period < 10) + min_period = 10; } } @@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) /* now set up to the maximum */ DV_SET(offset, spi_max_offset(starget)); - DV_SET(period, spi_min_period(starget)); + DV_SET(period, min_period); + /* try QAS requests; this should be harmless to set if the * target supports it */ if (scsi_device_qas(sdev)) { @@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) DV_SET(qas, 0); } - if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) { + if (scsi_device_ius(sdev) && min_period < 9) { /* This u320 (or u640). Set IU transfers */ DV_SET(iu, 1); /* Then set the optional parameters */ DV_SET(rd_strm, 1); DV_SET(wr_flow, 1); DV_SET(rti, 1); - if (spi_min_period(starget) == 8) + if (min_period == 8) DV_SET(pcomp_en, 1); } else { DV_SET(iu, 0); @@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) } else { DV_SET(dt, 1); } + /* set width last because it will pull all the other + * parameters down to required values */ + DV_SET(width, max_width); + /* Do the read only INQUIRY tests */ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len, spi_dv_device_compare_inquiry); -- cgit v1.2.3-58-ga151 From 36a740974129d7301054fa810adf22025896be78 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sat, 22 Sep 2007 14:43:45 +0200 Subject: KVM: Fix virtualization menu help text What guest drivers? Cc: Jan Engelhardt Signed-off-by: Avi Kivity Signed-off-by: Linus Torvalds --- drivers/kvm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/kvm/Kconfig b/drivers/kvm/Kconfig index 7b64fd4aa2f3..0a419a0de603 100644 --- a/drivers/kvm/Kconfig +++ b/drivers/kvm/Kconfig @@ -6,7 +6,8 @@ menuconfig VIRTUALIZATION depends on X86 default y ---help--- - Say Y here to get to see options for virtualization guest drivers. + Say Y here to get to see options for using your Linux host to run other + operating systems inside virtual machines (guests). This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. -- cgit v1.2.3-58-ga151 From b04e7bdb984e3b7f62fb7f44146a529f88cc7639 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 22 Sep 2007 22:29:05 +0000 Subject: ACPI: disable lower idle C-states across suspend/resume device_suspend() calls ACPI suspend functions, which seems to have undesired side effects on lower idle C-states. It took me some time to realize that especially the VAIO BIOSes (both Andrews jinxed UP and my elfstruck SMP one) show this effect. I'm quite sure that other bug reports against suspend/resume about turning the system into a brick have the same root cause. After fishing in the dark for quite some time, I realized that removing the ACPI processor module before suspend (this removes the lower C-state functionality) made the problem disappear. Interestingly enough the propability of having a bricked box is influenced by various factors (interrupts, size of the ram image, ...). Even adding a bunch of printks in the wrong places made the problem go away. The previous periodic tick implementation simply pampered over the problem, which explains why the dyntick / clockevents changes made this more prominent. We avoid complex functionality during the boot process and we have to do the same during suspend/resume. It is a similar scenario and equaly fragile. Add suspend / resume functions to the ACPI processor code and disable the lower idle C-states across suspend/resume. Fall back to the default idle implementation (halt) instead. Signed-off-by: Thomas Gleixner Tested-by: Andrew Morton Cc: Len Brown Cc: Venkatesh Pallipadi Cc: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/processor_core.c | 2 ++ drivers/acpi/processor_idle.c | 19 ++++++++++++++++++- include/acpi/processor.h | 2 ++ 3 files changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 2afb3d2086b3..9f11dc296cdd 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -102,6 +102,8 @@ static struct acpi_driver acpi_processor_driver = { .add = acpi_processor_add, .remove = acpi_processor_remove, .start = acpi_processor_start, + .suspend = acpi_processor_suspend, + .resume = acpi_processor_resume, }, }; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d9b8af763e1e..f18261368e76 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -325,6 +325,23 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, #endif +/* + * Suspend / resume control + */ +static int acpi_idle_suspend; + +int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) +{ + acpi_idle_suspend = 1; + return 0; +} + +int acpi_processor_resume(struct acpi_device * device) +{ + acpi_idle_suspend = 0; + return 0; +} + static void acpi_processor_idle(void) { struct acpi_processor *pr = NULL; @@ -355,7 +372,7 @@ static void acpi_processor_idle(void) } cx = pr->power.state; - if (!cx) { + if (!cx || acpi_idle_suspend) { if (pm_idle_save) pm_idle_save(); else diff --git a/include/acpi/processor.h b/include/acpi/processor.h index ec3ffdadb4d2..99934a999e66 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -320,6 +320,8 @@ int acpi_processor_power_init(struct acpi_processor *pr, int acpi_processor_cst_has_changed(struct acpi_processor *pr); int acpi_processor_power_exit(struct acpi_processor *pr, struct acpi_device *device); +int acpi_processor_suspend(struct acpi_device * device, pm_message_t state); +int acpi_processor_resume(struct acpi_device * device); /* in processor_thermal.c */ int acpi_processor_get_limit_info(struct acpi_processor *pr); -- cgit v1.2.3-58-ga151 From b7e113dc9d52c4a37d2da6fafe77959f3a28eccf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 22 Sep 2007 22:29:06 +0000 Subject: clockevents: remove the suspend/resume workaround^Wthinko In a desparate attempt to fix the suspend/resume problem on Andrews VAIO I added a workaround which enforced the broadcast of the oneshot timer on resume. This was actually resolving the problem on the VAIO but was just a stupid workaround, which was not tackling the root cause: the assignement of lower idle C-States in the ACPI processor_idle code. The cpuidle patches, which utilize the dynamic tick feature and go faster into deeper C-states exposed the problem again. The correct solution is the previous patch, which prevents lower C-states across the suspend/resume. Remove the enforcement code, including the conditional broadcast timer arming, which helped to pamper over the real problem for quite a time. The oneshot broadcast flag for the cpu, which runs the resume code can never be set at the time when this code is executed. It only gets set, when the CPU is entering a lower idle C-State. Signed-off-by: Thomas Gleixner Tested-by: Andrew Morton Cc: Len Brown Cc: Venkatesh Pallipadi Cc: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- kernel/time/tick-broadcast.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index aab881c86a1a..0962e0577660 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -382,23 +382,8 @@ static int tick_broadcast_set_event(ktime_t expires, int force) int tick_resume_broadcast_oneshot(struct clock_event_device *bc) { - int cpu = smp_processor_id(); - - /* - * If the CPU is marked for broadcast, enforce oneshot - * broadcast mode. The jinxed VAIO does not resume otherwise. - * No idea why it ends up in a lower C State during resume - * without notifying the clock events layer. - */ - if (cpu_isset(cpu, tick_broadcast_mask)) - cpu_set(cpu, tick_broadcast_oneshot_mask); - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); - - if(!cpus_empty(tick_broadcast_oneshot_mask)) - tick_broadcast_set_event(ktime_get(), 1); - - return cpu_isset(cpu, tick_broadcast_oneshot_mask); + return 0; } /* -- cgit v1.2.3-58-ga151 From 6e694ea33e7a7fad908d188c46f441f04fb633d4 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 19 Sep 2007 09:52:25 -0700 Subject: IB/mlx4: Fix data corruption triggered by wrong headroom marking order This is an addendum to commit 0e6e7416 ("IB/mlx4: Handle new FW requirement for send request prefetching"). We also need to handle prefetch marking properly for S/G segments, or else the HCA may end up processing S/G segments that are not fully written and end up sending the wrong data. This can actually cause data corruption in practice, especially on systems with relatively slow CPUs (where the HCA is more likely to prefetch while the CPU is in the middle of writing a work request into memory). We write S/G segments in reverse order into the WQE, in order to guarantee that the first dword of all cachelines containing S/G segments is written last (overwriting the headroom invalidation pattern). The entire cacheline will thus contain valid data when the invalidation pattern is overwritten. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 62 ++++++++++++++++++++++++++++++++--------- 1 file changed, 49 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index ba0428d872aa..85c51bdc36f1 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1211,12 +1211,42 @@ static void set_datagram_seg(struct mlx4_wqe_datagram_seg *dseg, dseg->qkey = cpu_to_be32(wr->wr.ud.remote_qkey); } -static void set_data_seg(struct mlx4_wqe_data_seg *dseg, - struct ib_sge *sg) +static void set_mlx_icrc_seg(void *dseg) +{ + u32 *t = dseg; + struct mlx4_wqe_inline_seg *iseg = dseg; + + t[1] = 0; + + /* + * Need a barrier here before writing the byte_count field to + * make sure that all the data is visible before the + * byte_count field is set. Otherwise, if the segment begins + * a new cacheline, the HCA prefetcher could grab the 64-byte + * chunk and get a valid (!= * 0xffffffff) byte count but + * stale data, and end up sending the wrong data. + */ + wmb(); + + iseg->byte_count = cpu_to_be32((1 << 31) | 4); +} + +static void set_data_seg(struct mlx4_wqe_data_seg *dseg, struct ib_sge *sg) { - dseg->byte_count = cpu_to_be32(sg->length); dseg->lkey = cpu_to_be32(sg->lkey); dseg->addr = cpu_to_be64(sg->addr); + + /* + * Need a barrier here before writing the byte_count field to + * make sure that all the data is visible before the + * byte_count field is set. Otherwise, if the segment begins + * a new cacheline, the HCA prefetcher could grab the 64-byte + * chunk and get a valid (!= * 0xffffffff) byte count but + * stale data, and end up sending the wrong data. + */ + wmb(); + + dseg->byte_count = cpu_to_be32(sg->length); } int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, @@ -1225,6 +1255,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, struct mlx4_ib_qp *qp = to_mqp(ibqp); void *wqe; struct mlx4_wqe_ctrl_seg *ctrl; + struct mlx4_wqe_data_seg *dseg; unsigned long flags; int nreq; int err = 0; @@ -1324,22 +1355,27 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, break; } - for (i = 0; i < wr->num_sge; ++i) { - set_data_seg(wqe, wr->sg_list + i); + /* + * Write data segments in reverse order, so as to + * overwrite cacheline stamp last within each + * cacheline. This avoids issues with WQE + * prefetching. + */ - wqe += sizeof (struct mlx4_wqe_data_seg); - size += sizeof (struct mlx4_wqe_data_seg) / 16; - } + dseg = wqe; + dseg += wr->num_sge - 1; + size += wr->num_sge * (sizeof (struct mlx4_wqe_data_seg) / 16); /* Add one more inline data segment for ICRC for MLX sends */ - if (qp->ibqp.qp_type == IB_QPT_SMI || qp->ibqp.qp_type == IB_QPT_GSI) { - ((struct mlx4_wqe_inline_seg *) wqe)->byte_count = - cpu_to_be32((1 << 31) | 4); - ((u32 *) wqe)[1] = 0; - wqe += sizeof (struct mlx4_wqe_data_seg); + if (unlikely(qp->ibqp.qp_type == IB_QPT_SMI || + qp->ibqp.qp_type == IB_QPT_GSI)) { + set_mlx_icrc_seg(dseg + 1); size += sizeof (struct mlx4_wqe_data_seg) / 16; } + for (i = wr->num_sge - 1; i >= 0; --i, --dseg) + set_data_seg(dseg, wr->sg_list + i); + ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ? MLX4_WQE_CTRL_FENCE : 0) | size; -- cgit v1.2.3-58-ga151 From ccec6e2c4a74adf76ed4e2478091a311b1806212 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 17 Sep 2007 21:55:10 +0200 Subject: Convert snd-page-alloc proc file to use seq_file Use seq_file for the proc file read/write of snd-page-alloc module. This automatically fixes bugs in the old proc code. Signed-off-by: Takashi Iwai Signed-off-by: Linus Torvalds --- sound/core/memalloc.c | 68 +++++++++++++++++++++++++++++---------------------- 1 file changed, 39 insertions(+), 29 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index f057430db0d0..9b5656d8bcca 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -481,53 +482,54 @@ static void free_all_reserved_pages(void) #define SND_MEM_PROC_FILE "driver/snd-page-alloc" static struct proc_dir_entry *snd_mem_proc; -static int snd_mem_proc_read(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int snd_mem_proc_read(struct seq_file *seq, void *offset) { - int len = 0; long pages = snd_allocated_pages >> (PAGE_SHIFT-12); struct snd_mem_list *mem; int devno; static char *types[] = { "UNKNOWN", "CONT", "DEV", "DEV-SG", "SBUS" }; mutex_lock(&list_mutex); - len += snprintf(page + len, count - len, - "pages : %li bytes (%li pages per %likB)\n", - pages * PAGE_SIZE, pages, PAGE_SIZE / 1024); + seq_printf(seq, "pages : %li bytes (%li pages per %likB)\n", + pages * PAGE_SIZE, pages, PAGE_SIZE / 1024); devno = 0; list_for_each_entry(mem, &mem_list_head, list) { devno++; - len += snprintf(page + len, count - len, - "buffer %d : ID %08x : type %s\n", - devno, mem->id, types[mem->buffer.dev.type]); - len += snprintf(page + len, count - len, - " addr = 0x%lx, size = %d bytes\n", - (unsigned long)mem->buffer.addr, (int)mem->buffer.bytes); + seq_printf(seq, "buffer %d : ID %08x : type %s\n", + devno, mem->id, types[mem->buffer.dev.type]); + seq_printf(seq, " addr = 0x%lx, size = %d bytes\n", + (unsigned long)mem->buffer.addr, + (int)mem->buffer.bytes); } mutex_unlock(&list_mutex); - return len; + return 0; +} + +static int snd_mem_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, snd_mem_proc_read, NULL); } /* FIXME: for pci only - other bus? */ #ifdef CONFIG_PCI #define gettoken(bufp) strsep(bufp, " \t\n") -static int snd_mem_proc_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t snd_mem_proc_write(struct file *file, const char __user * buffer, + size_t count, loff_t * ppos) { char buf[128]; char *token, *p; - if (count > ARRAY_SIZE(buf) - 1) - count = ARRAY_SIZE(buf) - 1; + if (count > sizeof(buf) - 1) + return -EINVAL; if (copy_from_user(buf, buffer, count)) return -EFAULT; - buf[ARRAY_SIZE(buf) - 1] = '\0'; + buf[count] = '\0'; p = buf; token = gettoken(&p); if (! token || *token == '#') - return (int)count; + return count; if (strcmp(token, "add") == 0) { char *endp; int vendor, device, size, buffers; @@ -548,7 +550,7 @@ static int snd_mem_proc_write(struct file *file, const char __user *buffer, (buffers = simple_strtol(token, NULL, 0)) <= 0 || buffers > 4) { printk(KERN_ERR "snd-page-alloc: invalid proc write format\n"); - return (int)count; + return count; } vendor &= 0xffff; device &= 0xffff; @@ -560,7 +562,7 @@ static int snd_mem_proc_write(struct file *file, const char __user *buffer, if (pci_set_dma_mask(pci, mask) < 0 || pci_set_consistent_dma_mask(pci, mask) < 0) { printk(KERN_ERR "snd-page-alloc: cannot set DMA mask %lx for pci %04x:%04x\n", mask, vendor, device); - return (int)count; + return count; } } for (i = 0; i < buffers; i++) { @@ -570,7 +572,7 @@ static int snd_mem_proc_write(struct file *file, const char __user *buffer, size, &dmab) < 0) { printk(KERN_ERR "snd-page-alloc: cannot allocate buffer pages (size = %d)\n", size); pci_dev_put(pci); - return (int)count; + return count; } snd_dma_reserve_buf(&dmab, snd_dma_pci_buf_id(pci)); } @@ -596,9 +598,21 @@ static int snd_mem_proc_write(struct file *file, const char __user *buffer, free_all_reserved_pages(); else printk(KERN_ERR "snd-page-alloc: invalid proc cmd\n"); - return (int)count; + return count; } #endif /* CONFIG_PCI */ + +static const struct file_operations snd_mem_proc_fops = { + .owner = THIS_MODULE, + .open = snd_mem_proc_open, + .read = seq_read, +#ifdef CONFIG_PCI + .write = snd_mem_proc_write, +#endif + .llseek = seq_lseek, + .release = single_release, +}; + #endif /* CONFIG_PROC_FS */ /* @@ -609,12 +623,8 @@ static int __init snd_mem_init(void) { #ifdef CONFIG_PROC_FS snd_mem_proc = create_proc_entry(SND_MEM_PROC_FILE, 0644, NULL); - if (snd_mem_proc) { - snd_mem_proc->read_proc = snd_mem_proc_read; -#ifdef CONFIG_PCI - snd_mem_proc->write_proc = snd_mem_proc_write; -#endif - } + if (snd_mem_proc) + snd_mem_proc->proc_fops = &snd_mem_proc_fops; #endif return 0; } -- cgit v1.2.3-58-ga151 From 1146fe30504a1edd8a434f500e1be139492570c9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 21 Sep 2007 17:13:55 +0100 Subject: [MIPS] SMTC: Make ack_bad_irq() safe with no IM backstop. Issue reported and original patch by Kevin Kissel, cleaner (imho) implementation by me. Signed-off-by: Ralf Baechle --- arch/mips/kernel/i8259.c | 5 +---- arch/mips/kernel/irq-msc01.c | 10 ++-------- arch/mips/kernel/irq.c | 10 +--------- arch/mips/kernel/smtc.c | 5 ++++- include/asm-mips/irq.h | 32 ++++++++++++++++++++++++-------- 5 files changed, 32 insertions(+), 30 deletions(-) diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index b6c30800c667..3a2d255361bc 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -177,10 +177,7 @@ handle_real_irq: outb(cached_master_mask, PIC_MASTER_IMR); outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ } -#ifdef CONFIG_MIPS_MT_SMTC - if (irq_hwmask[irq] & ST0_IM) - set_c0_status(irq_hwmask[irq] & ST0_IM); -#endif /* CONFIG_MIPS_MT_SMTC */ + smtc_im_ack_irq(irq); spin_unlock_irqrestore(&i8259A_lock, flags); return; diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index 410868b5ea5f..1ecdd50bfc60 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -52,11 +52,8 @@ static void level_mask_and_ack_msc_irq(unsigned int irq) mask_msc_irq(irq); if (!cpu_has_veic) MSCIC_WRITE(MSC01_IC_EOI, 0); -#ifdef CONFIG_MIPS_MT_SMTC /* This actually needs to be a call into platform code */ - if (irq_hwmask[irq] & ST0_IM) - set_c0_status(irq_hwmask[irq] & ST0_IM); -#endif /* CONFIG_MIPS_MT_SMTC */ + smtc_im_ack_irq(irq); } /* @@ -73,10 +70,7 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq) MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT); MSCIC_WRITE(MSC01_IC_SUP+irq*8, r); } -#ifdef CONFIG_MIPS_MT_SMTC - if (irq_hwmask[irq] & ST0_IM) - set_c0_status(irq_hwmask[irq] & ST0_IM); -#endif /* CONFIG_MIPS_MT_SMTC */ + smtc_im_ack_irq(irq); } /* diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index aeded6c17de5..a990aad2f049 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -74,20 +74,12 @@ EXPORT_SYMBOL_GPL(free_irqno); */ void ack_bad_irq(unsigned int irq) { + smtc_im_ack_irq(irq); printk("unexpected IRQ # %d\n", irq); } atomic_t irq_err_count; -#ifdef CONFIG_MIPS_MT_SMTC -/* - * SMTC Kernel needs to manipulate low-level CPU interrupt mask - * in do_IRQ. These are passed in setup_irq_smtc() and stored - * in this table. - */ -unsigned long irq_hwmask[NR_IRQS]; -#endif /* CONFIG_MIPS_MT_SMTC */ - /* * Generic, controller-independent functions: */ diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 43826c16101d..f09404377ef1 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -25,8 +25,11 @@ #include /* - * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. + * SMTC Kernel needs to manipulate low-level CPU interrupt mask + * in do_IRQ. These are passed in setup_irq_smtc() and stored + * in this table. */ +unsigned long irq_hwmask[NR_IRQS]; #define LOCK_MT_PRA() \ local_irq_save(flags); \ diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h index 97102ebc54b1..2cb52cf8bd4e 100644 --- a/include/asm-mips/irq.h +++ b/include/asm-mips/irq.h @@ -24,7 +24,30 @@ static inline int irq_canonicalize(int irq) #define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */ #endif +#ifdef CONFIG_MIPS_MT_SMTC + +struct irqaction; + +extern unsigned long irq_hwmask[]; +extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, + unsigned long hwmask); + +static inline void smtc_im_ack_irq(unsigned int irq) +{ + if (irq_hwmask[irq] & ST0_IM) + set_c0_status(irq_hwmask[irq] & ST0_IM); +} + +#else + +static inline void smtc_im_ack_irq(unsigned int irq) +{ +} + +#endif /* CONFIG_MIPS_MT_SMTC */ + #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP + /* * Clear interrupt mask handling "backstop" if irq_hwmask * entry so indicates. This implies that the ack() or end() @@ -38,6 +61,7 @@ do { \ ~(irq_hwmask[irq] & 0x0000ff00)); \ } while (0) #else + #define __DO_IRQ_SMTC_HOOK(irq) do { } while (0) #endif @@ -60,14 +84,6 @@ do { \ extern void arch_init_irq(void); extern void spurious_interrupt(void); -#ifdef CONFIG_MIPS_MT_SMTC -struct irqaction; - -extern unsigned long irq_hwmask[]; -extern int setup_irq_smtc(unsigned int irq, struct irqaction * new, - unsigned long hwmask); -#endif /* CONFIG_MIPS_MT_SMTC */ - extern int allocate_irqno(void); extern void alloc_legacy_irqno(void); extern void free_irqno(unsigned int irq); -- cgit v1.2.3-58-ga151 From c5d2b9f444b8d9f5ad7c5e583686c119ba3a9ba7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 20 Sep 2007 15:49:08 -0700 Subject: async_tx: usage documentation and developer notes (v2) Changes in v2: * cleanups from Randy and Shannon Reviewed-by: Randy Dunlap Reviewed-by: Shannon Nelson Signed-off-by: Dan Williams --- Documentation/crypto/async-tx-api.txt | 219 ++++++++++++++++++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 Documentation/crypto/async-tx-api.txt diff --git a/Documentation/crypto/async-tx-api.txt b/Documentation/crypto/async-tx-api.txt new file mode 100644 index 000000000000..c1e9545c59bd --- /dev/null +++ b/Documentation/crypto/async-tx-api.txt @@ -0,0 +1,219 @@ + Asynchronous Transfers/Transforms API + +1 INTRODUCTION + +2 GENEALOGY + +3 USAGE +3.1 General format of the API +3.2 Supported operations +3.3 Descriptor management +3.4 When does the operation execute? +3.5 When does the operation complete? +3.6 Constraints +3.7 Example + +4 DRIVER DEVELOPER NOTES +4.1 Conformance points +4.2 "My application needs finer control of hardware channels" + +5 SOURCE + +--- + +1 INTRODUCTION + +The async_tx API provides methods for describing a chain of asynchronous +bulk memory transfers/transforms with support for inter-transactional +dependencies. It is implemented as a dmaengine client that smooths over +the details of different hardware offload engine implementations. Code +that is written to the API can optimize for asynchronous operation and +the API will fit the chain of operations to the available offload +resources. + +2 GENEALOGY + +The API was initially designed to offload the memory copy and +xor-parity-calculations of the md-raid5 driver using the offload engines +present in the Intel(R) Xscale series of I/O processors. It also built +on the 'dmaengine' layer developed for offloading memory copies in the +network stack using Intel(R) I/OAT engines. The following design +features surfaced as a result: +1/ implicit synchronous path: users of the API do not need to know if + the platform they are running on has offload capabilities. The + operation will be offloaded when an engine is available and carried out + in software otherwise. +2/ cross channel dependency chains: the API allows a chain of dependent + operations to be submitted, like xor->copy->xor in the raid5 case. The + API automatically handles cases where the transition from one operation + to another implies a hardware channel switch. +3/ dmaengine extensions to support multiple clients and operation types + beyond 'memcpy' + +3 USAGE + +3.1 General format of the API: +struct dma_async_tx_descriptor * +async_(, + enum async_tx_flags flags, + struct dma_async_tx_descriptor *dependency, + dma_async_tx_callback callback_routine, + void *callback_parameter); + +3.2 Supported operations: +memcpy - memory copy between a source and a destination buffer +memset - fill a destination buffer with a byte value +xor - xor a series of source buffers and write the result to a + destination buffer +xor_zero_sum - xor a series of source buffers and set a flag if the + result is zero. The implementation attempts to prevent + writes to memory + +3.3 Descriptor management: +The return value is non-NULL and points to a 'descriptor' when the operation +has been queued to execute asynchronously. Descriptors are recycled +resources, under control of the offload engine driver, to be reused as +operations complete. When an application needs to submit a chain of +operations it must guarantee that the descriptor is not automatically recycled +before the dependency is submitted. This requires that all descriptors be +acknowledged by the application before the offload engine driver is allowed to +recycle (or free) the descriptor. A descriptor can be acked by one of the +following methods: +1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted +2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent + descriptor of a new operation. +3/ calling async_tx_ack() on the descriptor. + +3.4 When does the operation execute? +Operations do not immediately issue after return from the +async_ call. Offload engine drivers batch operations to +improve performance by reducing the number of mmio cycles needed to +manage the channel. Once a driver-specific threshold is met the driver +automatically issues pending operations. An application can force this +event by calling async_tx_issue_pending_all(). This operates on all +channels since the application has no knowledge of channel to operation +mapping. + +3.5 When does the operation complete? +There are two methods for an application to learn about the completion +of an operation. +1/ Call dma_wait_for_async_tx(). This call causes the CPU to spin while + it polls for the completion of the operation. It handles dependency + chains and issuing pending operations. +2/ Specify a completion callback. The callback routine runs in tasklet + context if the offload engine driver supports interrupts, or it is + called in application context if the operation is carried out + synchronously in software. The callback can be set in the call to + async_, or when the application needs to submit a chain of + unknown length it can use the async_trigger_callback() routine to set a + completion interrupt/callback at the end of the chain. + +3.6 Constraints: +1/ Calls to async_ are not permitted in IRQ context. Other + contexts are permitted provided constraint #2 is not violated. +2/ Completion callback routines cannot submit new operations. This + results in recursion in the synchronous case and spin_locks being + acquired twice in the asynchronous case. + +3.7 Example: +Perform a xor->copy->xor operation where each operation depends on the +result from the previous operation: + +void complete_xor_copy_xor(void *param) +{ + printk("complete\n"); +} + +int run_xor_copy_xor(struct page **xor_srcs, + int xor_src_cnt, + struct page *xor_dest, + size_t xor_len, + struct page *copy_src, + struct page *copy_dest, + size_t copy_len) +{ + struct dma_async_tx_descriptor *tx; + + tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, + ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL); + tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, + ASYNC_TX_DEP_ACK, tx, NULL, NULL); + tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, + ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, + tx, complete_xor_copy_xor, NULL); + + async_tx_issue_pending_all(); +} + +See include/linux/async_tx.h for more information on the flags. See the +ops_run_* and ops_complete_* routines in drivers/md/raid5.c for more +implementation examples. + +4 DRIVER DEVELOPMENT NOTES +4.1 Conformance points: +There are a few conformance points required in dmaengine drivers to +accommodate assumptions made by applications using the async_tx API: +1/ Completion callbacks are expected to happen in tasklet context +2/ dma_async_tx_descriptor fields are never manipulated in IRQ context +3/ Use async_tx_run_dependencies() in the descriptor clean up path to + handle submission of dependent operations + +4.2 "My application needs finer control of hardware channels" +This requirement seems to arise from cases where a DMA engine driver is +trying to support device-to-memory DMA. The dmaengine and async_tx +implementations were designed for offloading memory-to-memory +operations; however, there are some capabilities of the dmaengine layer +that can be used for platform-specific channel management. +Platform-specific constraints can be handled by registering the +application as a 'dma_client' and implementing a 'dma_event_callback' to +apply a filter to the available channels in the system. Before showing +how to implement a custom dma_event callback some background of +dmaengine's client support is required. + +The following routines in dmaengine support multiple clients requesting +use of a channel: +- dma_async_client_register(struct dma_client *client) +- dma_async_client_chan_request(struct dma_client *client) + +dma_async_client_register takes a pointer to an initialized dma_client +structure. It expects that the 'event_callback' and 'cap_mask' fields +are already initialized. + +dma_async_client_chan_request triggers dmaengine to notify the client of +all channels that satisfy the capability mask. It is up to the client's +event_callback routine to track how many channels the client needs and +how many it is currently using. The dma_event_callback routine returns a +dma_state_client code to let dmaengine know the status of the +allocation. + +Below is the example of how to extend this functionality for +platform-specific filtering of the available channels beyond the +standard capability mask: + +static enum dma_state_client +my_dma_client_callback(struct dma_client *client, + struct dma_chan *chan, enum dma_state state) +{ + struct dma_device *dma_dev; + struct my_platform_specific_dma *plat_dma_dev; + + dma_dev = chan->device; + plat_dma_dev = container_of(dma_dev, + struct my_platform_specific_dma, + dma_dev); + + if (!plat_dma_dev->platform_specific_capability) + return DMA_DUP; + + . . . +} + +5 SOURCE +include/linux/dmaengine.h: core header file for DMA drivers and clients +drivers/dma/dmaengine.c: offload engine channel management routines +drivers/dma/: location for offload engine drivers +include/linux/async_tx.h: core header file for the async_tx api +crypto/async_tx/async_tx.c: async_tx interface to dmaengine and common code +crypto/async_tx/async_memcpy.c: copy offload +crypto/async_tx/async_memset.c: memory fill offload +crypto/async_tx/async_xor.c: xor and xor zero sum offload -- cgit v1.2.3-58-ga151 From 6247cdc2cd334dad0ea5428245a7d8f4b075f21e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 21 Sep 2007 13:27:04 -0700 Subject: async_tx: fix dma_wait_for_async_tx Fix dma_wait_for_async_tx to not loop forever in the case where a dependency chain is longer than two entries. This condition will not happen with current in-kernel drivers, but fix it for future drivers. Found-by: Saeed Bishara Signed-off-by: Dan Williams --- crypto/async_tx/async_tx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c index 035007145e78..bc18cbb8ea79 100644 --- a/crypto/async_tx/async_tx.c +++ b/crypto/async_tx/async_tx.c @@ -80,6 +80,7 @@ dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) { enum dma_status status; struct dma_async_tx_descriptor *iter; + struct dma_async_tx_descriptor *parent; if (!tx) return DMA_SUCCESS; @@ -87,8 +88,15 @@ dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) /* poll through the dependency chain, return when tx is complete */ do { iter = tx; - while (iter->cookie == -EBUSY) - iter = iter->parent; + + /* find the root of the unsubmitted dependency chain */ + while (iter->cookie == -EBUSY) { + parent = iter->parent; + if (parent && parent->cookie == -EBUSY) + iter = iter->parent; + else + break; + } status = dma_sync_wait(iter->chan, iter->cookie); } while (status == DMA_IN_PROGRESS || (iter != tx)); -- cgit v1.2.3-58-ga151 From e4d84909dd48b5e5806a5d18b881e1ca1610ba9b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 24 Sep 2007 10:06:13 -0700 Subject: raid5: fix 2 bugs in ops_complete_biofill 1/ ops_complete_biofill tried to avoid calling handle_stripe since all the state necessary to return read completions is available. However the process of determining whether more read requests are pending requires locking the stripe (to block add_stripe_bio from updating dev->toead). ops_complete_biofill can run in tasklet context, so rather than upgrading all the stripe locks from spin_lock to spin_lock_bh this patch just unconditionally reschedules handle_stripe after completing the read request. 2/ ops_complete_biofill needlessly qualified processing R5_Wantfill with dev->toread. The result being that the 'biofill' pending bit is cleared before handling the pending read-completions on dev->read. R5_Wantfill can be unconditionally handled because the 'biofill' pending bit prevents new R5_Wantfill requests from being seen by ops_run_biofill and ops_complete_biofill. Found-by: Yuri Tikhonov [neilb@suse.de: simpler fix for bug 1 than moving code] Signed-off-by: NeilBrown Signed-off-by: Dan Williams --- drivers/md/raid5.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4d63773ee73a..f96dea975fa5 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -514,7 +514,7 @@ static void ops_complete_biofill(void *stripe_head_ref) struct stripe_head *sh = stripe_head_ref; struct bio *return_bi = NULL; raid5_conf_t *conf = sh->raid_conf; - int i, more_to_read = 0; + int i; pr_debug("%s: stripe %llu\n", __FUNCTION__, (unsigned long long)sh->sector); @@ -522,16 +522,14 @@ static void ops_complete_biofill(void *stripe_head_ref) /* clear completed biofills */ for (i = sh->disks; i--; ) { struct r5dev *dev = &sh->dev[i]; - /* check if this stripe has new incoming reads */ - if (dev->toread) - more_to_read++; /* acknowledge completion of a biofill operation */ - /* and check if we need to reply to a read request - */ - if (test_bit(R5_Wantfill, &dev->flags) && !dev->toread) { + /* and check if we need to reply to a read request, + * new R5_Wantfill requests are held off until + * !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending) + */ + if (test_and_clear_bit(R5_Wantfill, &dev->flags)) { struct bio *rbi, *rbi2; - clear_bit(R5_Wantfill, &dev->flags); /* The access to dev->read is outside of the * spin_lock_irq(&conf->device_lock), but is protected @@ -558,8 +556,7 @@ static void ops_complete_biofill(void *stripe_head_ref) return_io(return_bi); - if (more_to_read) - set_bit(STRIPE_HANDLE, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); } -- cgit v1.2.3-58-ga151 From 4942de4a0e914f205d351a81873f4f63986bcc3c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 24 Sep 2007 17:33:10 -0700 Subject: Linux 2.6.23-rc8 Getting there... --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index c265e41ec55a..4dac25301d5f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 23 -EXTRAVERSION =-rc7 +EXTRAVERSION =-rc8 NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* -- cgit v1.2.3-58-ga151 From 6d3105d5388c359882068b161b431ab3db4b3721 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 24 Sep 2007 19:34:51 -0700 Subject: sky2: FE+ Phy initialization One more snippet of PHY initialization required for FE+ chips. Discovered in latest sk98lin 10.21.1.3 driver. Please apply to 2.6.23. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eaffe551d1d8..f3a8243219ae 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -338,6 +338,16 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (!(hw->flags & SKY2_HW_GIGABIT)) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; + + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) { + u16 spec; + + /* Enable Class A driver for FE+ A0 */ + spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); + spec |= PHY_M_FESC_SEL_CL_A; + gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); + } } else { /* disable energy detect */ ctrl &= ~PHY_M_PC_EN_DET_MSK; -- cgit v1.2.3-58-ga151 From e0c281163d634e2982a81b55fc974a6663afde65 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 20 Sep 2007 13:03:49 -0700 Subject: sky2: be more selective about FIFO watchdog Be more selective about when to enable the ram buffer watchdog code. It is unnecessary on XL A3 or later revs, and with Yukon FE the buffer is so small (4K) that the watchdog detects false positives. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 27 ++++++++++++++------------- drivers/net/sky2.h | 2 +- 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f3a8243219ae..0792031a5cf9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -826,7 +826,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) { + /* On chips without ram buffer, pause is controled by MAC level */ + if (sky2_read8(hw, B2_E_0) == 0) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -1281,7 +1282,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 imask; + u32 imask, ramsize; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1336,13 +1337,12 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - if (hw->flags & SKY2_HW_RAMBUFFER) { - /* Register is number of 4K blocks on internal RAM buffer. */ - u32 ramsize = sky2_read8(hw, B2_E_0) * 4; + /* Register is number of 4K blocks on internal RAM buffer. */ + ramsize = sky2_read8(hw, B2_E_0) * 4; + if (ramsize > 0) { u32 rxspace; - printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); - + pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize); if (ramsize < 16) rxspace = ramsize / 2; else @@ -2005,7 +2005,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) + if (sky2_read8(hw, B2_E_0) == 0) sky2_set_tx_stfwd(hw, port); ctl = gma_read16(hw, port, GM_GP_CTRL); @@ -2536,7 +2536,7 @@ static void sky2_watchdog(unsigned long arg) ++active; /* For chips with Rx FIFO, check if stuck */ - if ((hw->flags & SKY2_HW_RAMBUFFER) && + if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) && sky2_rx_hung(dev)) { pr_info(PFX "%s: receiver hang detected\n", dev->name); @@ -2694,8 +2694,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) switch(hw->chip_id) { case CHIP_ID_YUKON_XL: hw->flags = SKY2_HW_GIGABIT - | SKY2_HW_NEWER_PHY - | SKY2_HW_RAMBUFFER; + | SKY2_HW_NEWER_PHY; + if (hw->chip_rev < 3) + hw->flags |= SKY2_HW_FIFO_HANG_CHECK; + break; case CHIP_ID_YUKON_EC_U: @@ -2721,11 +2723,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); return -EOPNOTSUPP; } - hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK; break; case CHIP_ID_YUKON_FE: - hw->flags = SKY2_HW_RAMBUFFER; break; case CHIP_ID_YUKON_FE_P: diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 69cd98400fe6..8bc5c54e3efa 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2063,7 +2063,7 @@ struct sky2_hw { #define SKY2_HW_FIBRE_PHY 0x00000002 #define SKY2_HW_GIGABIT 0x00000004 #define SKY2_HW_NEWER_PHY 0x00000008 -#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_FIFO_HANG_CHECK 0x00000010 #define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ #define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ #define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ -- cgit v1.2.3-58-ga151 From cb560737676260ac15b68d426305ad5e755417ea Mon Sep 17 00:00:00 2001 From: Thomas Rohwer Date: Tue, 25 Sep 2007 00:06:25 -0400 Subject: Input: appletouch - fix idle reset logic Idle count should only be incremented when touchpad button is not pressed, otherwise reset may happen at a wrong time and touchpad will never report button release event. Signed-off-by: Thomas Rohwer Acked-by: Matthew Garrett Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/appletouch.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 2bea1b2c631c..a1804bfdbb8c 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -328,6 +328,7 @@ static void atp_complete(struct urb* urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; + int key; struct atp *dev = urb->context; switch (urb->status) { @@ -468,6 +469,7 @@ static void atp_complete(struct urb* urb) ATP_XFACT, &x_z, &x_f); y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, ATP_YFACT, &y_z, &y_f); + key = dev->data[dev->datalen - 1] & 1; if (x && y) { if (dev->x_old != -1) { @@ -505,7 +507,7 @@ static void atp_complete(struct urb* urb) the first touch unless reinitialised. Do so if it's been idle for a while in order to avoid waking the kernel up several hundred times a second */ - if (atp_is_geyser_3(dev)) { + if (!key && atp_is_geyser_3(dev)) { dev->idlecount++; if (dev->idlecount == 10) { dev->valid = 0; @@ -514,7 +516,7 @@ static void atp_complete(struct urb* urb) } } - input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1); + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); exit: -- cgit v1.2.3-58-ga151 From 21c0f275085e5b884a409d75a7deb73ece6477fb Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 25 Sep 2007 00:11:34 -0400 Subject: Revert "drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo" This reverts commit fadacb1b80e35e0b36a90d43e21ef91eec4b889b. The change being reverted made the driver consistent with include/linux/netdevice.h, but then inconsistent with the other PCMCIA ethernet drivers. Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/3c589_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index c06cae3f0b56..503f2685fb73 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -116,7 +116,7 @@ struct el3_private { spinlock_t lock; }; -static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" }; +static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; /*====================================================================*/ -- cgit v1.2.3-58-ga151 From 474f81967217f3bec2389ae913da72641f2c40e3 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 24 Sep 2007 16:52:44 -0700 Subject: [POWERPC] Ensure FULL_REGS on exec When PTRACE_O_TRACEEXEC is used, a ptrace call to fetch the registers at the PTRACE_EVENT_EXEC stop (PTRACE_PEEKUSR) will oops in CHECK_FULL_REGS. With recent versions, "gdb --args /bin/sh -c 'exec /bin/true'" and "run" at the (gdb) prompt is sufficient to produce this. I also have written an isolated test case, see https://bugzilla.redhat.com/show_bug.cgi?id=301791#c15. This change fixes the problem by clearing the low bit of pt_regs.trap in start_thread so that FULL_REGS is true again. This is correct since all of the GPRs that "full" refers to are cleared in start_thread. Signed-off-by: Roland McGrath Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/process.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e477c9d0498b..8a1b001d0b11 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -605,6 +605,13 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) regs->ccr = 0; regs->gpr[1] = sp; + /* + * We have just cleared all the nonvolatile GPRs, so make + * FULL_REGS(regs) return true. This is necessary to allow + * ptrace to examine the thread immediately after exec. + */ + regs->trap &= ~1UL; + #ifdef CONFIG_PPC32 regs->mq = 0; regs->nip = start; -- cgit v1.2.3-58-ga151 From f9b7cba1b8a74c10b0771ca28d4c554aeb9803fc Mon Sep 17 00:00:00 2001 From: Evgeniy Dushistov Date: Mon, 24 Sep 2007 21:24:39 -0700 Subject: ufs: fix sun state Different types of ufs hold state in different places, to hide complexity of this, there is ufs_get_fs_state, it returns state according to "UFS_SB(sb)->s_flags", but during mount ufs_get_fs_state is called, before setting s_flags, this cause message for ufs types like sun ufs: "fs need fsck", and remount in readonly state. Signed-off-by: Evgeniy Dushistov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ufs/super.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 73402c5eeb8a..38eb0b7a1f3d 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -894,7 +894,7 @@ magic_found: goto again; } - + sbi->s_flags = flags;/*after that line some functions use s_flags*/ ufs_print_super_stuff(sb, usb1, usb2, usb3); /* @@ -1025,8 +1025,6 @@ magic_found: UFS_MOUNT_UFSTYPE_44BSD) uspi->s_maxsymlinklen = fs32_to_cpu(sb, usb3->fs_un2.fs_44.fs_maxsymlinklen); - - sbi->s_flags = flags; inode = iget(sb, UFS_ROOTINO); if (!inode || is_bad_inode(inode)) -- cgit v1.2.3-58-ga151 From afa684f6fda6086b229348f0ea21df7c8ad17964 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Mon, 24 Sep 2007 21:24:41 -0700 Subject: fix "mspec: handle shrinking virtual memory areas" The vma_data structure may be shared by vma's from multiple tasks, with no way of knowing which areas are shared or not shared, so release/clear pages only when the refcount (of vma's) goes to zero. Signed-off-by: Cliff Wickman Cc: Jes Sorensen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mspec.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 049a46cc9f87..04ac155d3a07 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -155,23 +155,22 @@ mspec_open(struct vm_area_struct *vma) * mspec_close * * Called when unmapping a device mapping. Frees all mspec pages - * belonging to the vma. + * belonging to all the vma's sharing this vma_data structure. */ static void mspec_close(struct vm_area_struct *vma) { struct vma_data *vdata; - int index, last_index, result; + int index, last_index; unsigned long my_page; vdata = vma->vm_private_data; - BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end); + if (!atomic_dec_and_test(&vdata->refcnt)) + return; - spin_lock(&vdata->lock); - index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT; - last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT; - for (; index < last_index; index++) { + last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT; + for (index = 0; index < last_index; index++) { if (vdata->maddr[index] == 0) continue; /* @@ -180,20 +179,12 @@ mspec_close(struct vm_area_struct *vma) */ my_page = vdata->maddr[index]; vdata->maddr[index] = 0; - spin_unlock(&vdata->lock); - result = mspec_zero_block(my_page, PAGE_SIZE); - if (!result) + if (!mspec_zero_block(my_page, PAGE_SIZE)) uncached_free_page(my_page); else printk(KERN_WARNING "mspec_close(): " - "failed to zero page %i\n", - result); - spin_lock(&vdata->lock); + "failed to zero page %ld\n", my_page); } - spin_unlock(&vdata->lock); - - if (!atomic_dec_and_test(&vdata->refcnt)) - return; if (vdata->flags & VMD_VMALLOCED) vfree(vdata); @@ -201,7 +192,6 @@ mspec_close(struct vm_area_struct *vma) kfree(vdata); } - /* * mspec_nopfn * -- cgit v1.2.3-58-ga151 From d1cf16c91605d051d36360f70858b06b103b4aed Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 24 Sep 2007 21:24:42 -0700 Subject: missing null termination in one wire uevent Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: Stephen Hemminger Cc: Greg Kroah-Hartman Acked-by: Evgeniy Polyakov Cc: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/w1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 8d7ab74170d5..a593f900eff4 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -431,6 +431,7 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp, err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_SLAVE_ID=%024LX", (unsigned long long)sl->reg_num.id); + envp[cur_index] = NULL; if (err) return err; -- cgit v1.2.3-58-ga151 From fdfb870f8e34e77567043b388051df14f7d33482 Mon Sep 17 00:00:00 2001 From: Danny ter Haar Date: Mon, 24 Sep 2007 21:24:43 -0700 Subject: typo fix Kernel config option Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 50a94eee4d92..495863a500cd 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -284,7 +284,7 @@ config LOCKDEP select KALLSYMS_ALL config LOCK_STAT - bool "Lock usage statisitics" + bool "Lock usage statistics" depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select LOCKDEP select DEBUG_SPINLOCK -- cgit v1.2.3-58-ga151 From bbbd2bf00bab467cff7b1f418b2cb24c71291f59 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 24 Sep 2007 21:24:44 -0700 Subject: fix modules oopsing in lguest guests The assembly templates for lguest guest patching are in the .init.text section. This means that modules get patched with "cc cc cc cc" or similar junk. Signed-off-by: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/lguest/lguest_asm.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/lguest/lguest_asm.S b/drivers/lguest/lguest_asm.S index f182c6a36209..1ddcd5cd20f6 100644 --- a/drivers/lguest/lguest_asm.S +++ b/drivers/lguest/lguest_asm.S @@ -22,8 +22,9 @@ jmp lguest_init /*G:055 We create a macro which puts the assembler code between lgstart_ and - * lgend_ markers. These templates end up in the .init.text section, so they - * are discarded after boot. */ + * lgend_ markers. These templates are put in the .text section: they can't be + * discarded after boot as we may need to patch modules, too. */ +.text #define LGUEST_PATCH(name, insns...) \ lgstart_##name: insns; lgend_##name:; \ .globl lgstart_##name; .globl lgend_##name @@ -34,7 +35,6 @@ LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled) LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax) /*:*/ -.text /* These demark the EIP range where host should never deliver interrupts. */ .global lguest_noirq_start .global lguest_noirq_end -- cgit v1.2.3-58-ga151 From 2f3f22269bdf702311342c5d106dfdd7347d1c3e Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 24 Sep 2007 14:33:21 +0200 Subject: ACPI: suspend: build-fix for CONFIG_SUSPEND=n and CONFIG_HIBERNATION=y This fixes compilation with CONFIG_SUSPEND unset and CONFIG_HIBERNATION set (raf. http://marc.info/?l=linux-acpi&m=119055289723895&w=4). Signed-off-by: Alexey Starikovskiy Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 85633c585aab..c79edcb8e842 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -26,6 +26,27 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; static u32 acpi_target_sleep_state = ACPI_STATE_S0; +int acpi_sleep_prepare(u32 acpi_state) +{ +#ifdef CONFIG_ACPI_SLEEP + /* do we have a wakeup address for S2 and S3? */ + if (acpi_state == ACPI_STATE_S3) { + if (!acpi_wakeup_address) { + return -EFAULT; + } + acpi_set_firmware_waking_vector((acpi_physical_address) + virt_to_phys((void *) + acpi_wakeup_address)); + + } + ACPI_FLUSH_CPU_CACHE(); + acpi_enable_wakeup_device_prep(acpi_state); +#endif + acpi_gpe_sleep_prepare(acpi_state); + acpi_enter_sleep_state_prep(acpi_state); + return 0; +} + #ifdef CONFIG_SUSPEND static struct pm_ops acpi_pm_ops; @@ -60,27 +81,6 @@ static int acpi_pm_set_target(suspend_state_t pm_state) return error; } -int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - acpi_gpe_sleep_prepare(acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - /** * acpi_pm_prepare - Do preliminary suspend work. * @pm_state: ignored -- cgit v1.2.3-58-ga151 From 853298bc03ef65e3eb392f5d61265605214ee8fb Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 25 Sep 2007 18:45:15 +0400 Subject: ACPI: CONFIG_ACPI_SLEEP=n power off regression in 2.6.23-rc8 (NOT in rc7) Signed-off-by: Alexey Starikovskiy Acked-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/Makefile | 2 +- drivers/acpi/sleep/main.c | 4 ++++ include/acpi/acpi_drivers.h | 4 ---- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile index ba9bd403d443..f1fb888c2d29 100644 --- a/drivers/acpi/sleep/Makefile +++ b/drivers/acpi/sleep/Makefile @@ -1,5 +1,5 @@ obj-y := wakeup.o -obj-$(CONFIG_ACPI_SLEEP) += main.o +obj-y += main.o obj-$(CONFIG_ACPI_SLEEP) += proc.o EXTRA_CFLAGS += $(ACPI_CFLAGS) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index c79edcb8e842..2cbb9aabd00e 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,7 +24,9 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; +#ifdef CONFIG_PM_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +#endif int acpi_sleep_prepare(u32 acpi_state) { @@ -299,6 +301,7 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } +#ifdef CONFIG_PM_SLEEP /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state @@ -373,6 +376,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) *d_min_p = d_min; return d_max; } +#endif static void acpi_power_off_prepare(void) { diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 202acb9ff4d0..f85f77a538aa 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -147,10 +147,6 @@ static inline void unregister_hotplug_dock_device(acpi_handle handle) /*-------------------------------------------------------------------------- Suspend/Resume -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_SLEEP extern int acpi_sleep_init(void); -#else -static inline int acpi_sleep_init(void) { return 0; } -#endif #endif /*__ACPI_DRIVERS_H__*/ -- cgit v1.2.3-58-ga151 From 78e1ca49c7ead5cd00882ed0c776260857613122 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Thu, 20 Sep 2007 21:23:13 -0400 Subject: ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 If hpet has been initialized before registering hpet driver, the callback function of hpet_resources will return the status code of -EBUSY, which is not defined in the ACPI exception table. So when ACPI checks the status code of callback function, it will report the unknown exception code. So the status code in ACPI is used instead of the generic error code in the ACPI callback function of hpet_resources. For example: -EBUSY is replaced by AE_ALREADY_EXISTS -EINVAL is replaced by AE_NO_MEMORY http://bugzilla.kernel.org/show_bug.cgi?id=8630 Signed-off-by: Zhao Yakui Signed-off-by: Len Brown --- drivers/char/hpet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 7ecffc9c738f..fd51554ab081 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -943,14 +943,14 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { struct acpi_resource_fixed_memory32 *fixmem32; fixmem32 = &res->data.fixed_memory32; if (!fixmem32) - return -EINVAL; + return AE_NO_MEMORY; hdp->hd_phys_address = fixmem32->address; hdp->hd_address = ioremap(fixmem32->address, @@ -960,7 +960,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { struct acpi_resource_extended_irq *irqp; -- cgit v1.2.3-58-ga151 From 228f47b959a0cf2e24c9696757c7e6510334e499 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 23 Sep 2007 12:37:05 +0900 Subject: sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is used When PCIX_IRQ_WOC is used, sil24 has an inherent race condition between clearing IRQ pending and reading IRQ status. If IRQ pending is cleared after reading IRQ status, there's possibility of lost IRQ. If IRQ pending is cleared before reading IRQ status, spurious IRQs will occur. sata_sil24 till now cleared IRQ pending after reading IRQ status thus losing IRQs on machines where PCIX_IRQ_WOC was used. Reverse the order and ignore spurious IRQs if PCIX_IRQ_WOC. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index ef83e6b1e314..233e88693395 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap) u32 slot_stat, qc_active; int rc; + /* If PCIX_IRQ_WOC, there's an inherent race window between + * clearing IRQ pending status and reading PORT_SLOT_STAT + * which may cause spurious interrupts afterwards. This is + * unavoidable and much better than losing interrupts which + * happens if IRQ pending is cleared after reading + * PORT_SLOT_STAT. + */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + slot_stat = readl(port + PORT_SLOT_STAT); if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { @@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - qc_active = slot_stat & ~HOST_SSTAT_ATTN; rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); if (rc > 0) @@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ata_ratelimit()) + /* spurious interrupts are expected if PCIX_IRQ_WOC */ + if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", slot_stat, ap->active_tag, ap->sactive); -- cgit v1.2.3-58-ga151 From edeb614c1c8388b354d93ff7790317cc5d6a38ec Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 21 Sep 2007 16:29:05 +0900 Subject: pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode() sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is missing udma timing value for UDMA100. According to sis5513, this should be 0x8000. This caused UDMA100 device to fail on pata_sis till it downgrades to UDMA66 while it works fine on sis5513 at UDMA100. Reported by Adam Blech. Signed-off-by: Tejun Heo Cc: Adam Blech Signed-off-by: Jeff Garzik --- drivers/ata/pata_sis.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 2bd7645f1a88..cce2834b2b60 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; + /* MWDMA 0-2 and UDMA 0-5 */ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); -- cgit v1.2.3-58-ga151 From ff4abd6cfacf0bb23a077f615d3a5cd17359db1b Mon Sep 17 00:00:00 2001 From: David Miller Date: Fri, 24 Aug 2007 22:25:58 -0700 Subject: [SCSI] esp: fix instance numbering. Because the ->unique_id is set too late, the ESP scsi host instance numbers in the kernel log during probing are wrong. Bug reported by Meelis Roos. Signed-off-by: David S. Miller Signed-off-by: James Bottomley --- drivers/scsi/esp_scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 77b06a983fa7..95cf7b6cd622 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2314,6 +2314,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev) esp->host->transportt = esp_transport_template; esp->host->max_lun = ESP_MAX_LUN; esp->host->cmd_per_lun = 2; + esp->host->unique_id = instance; esp_set_clock_params(esp); @@ -2337,7 +2338,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev) if (err) return err; - esp->host->unique_id = instance++; + instance++; scsi_scan_host(esp->host); -- cgit v1.2.3-58-ga151 From 744551cceb73acd62189cb4afe0a336b2c9684d8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 25 Sep 2007 22:49:37 -0700 Subject: [SUNSAB]: Fix broken SYSRQ. Include SYSRQ support for SUNSAB if SUNSAB_CONSOLE is selected Signed-off-by: Thomas Bogendoerfer Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e348ba684050..ff610c23314b 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -38,7 +38,7 @@ #include #include -#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif -- cgit v1.2.3-58-ga151 From 7b5ee3a038c869e773092834abaa8174e0d77514 Mon Sep 17 00:00:00 2001 From: Satyam Sharma Date: Mon, 3 Sep 2007 01:41:34 +0530 Subject: [PATCH] net/wireless/sysfs.c: Shut up build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/wireless/sysfs.c:108: warning: ‘wiphy_uevent’ defined but not used when CONFIG_HOTPLUG=n is because the only usage site of this function is #ifdef'ed as such, so let's #ifdef the definition also. Signed-off-by: Satyam Sharma Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index 88aaacd9f822..2d5d2255a27c 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -52,12 +52,14 @@ static void wiphy_dev_release(struct device *dev) cfg80211_dev_free(rdev); } +#ifdef CONFIG_HOTPLUG static int wiphy_uevent(struct device *dev, char **envp, int num_envp, char *buf, int size) { /* TODO, we probably need stuff here */ return 0; } +#endif struct class ieee80211_class = { .name = "ieee80211", -- cgit v1.2.3-58-ga151 From 3a4624652e68ee897145ac698a85bfd2603367c3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Sep 2007 13:44:45 +0200 Subject: [PATCH] cfg80211: fix initialisation if built-in When cfg80211 is built into the kernel it needs to init earlier so that device registrations are run after it has initialised. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 7eabd55417a5..9771451eae21 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -213,7 +213,7 @@ out_fail_notifier: out_fail_sysfs: return err; } -module_init(cfg80211_init); +subsys_initcall(cfg80211_init); static void cfg80211_exit(void) { -- cgit v1.2.3-58-ga151 From 136e83d6b8999f4ef680ff9cf2a67e1e1ccbd94e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Sep 2007 13:55:08 +0200 Subject: [PATCH] net/mac80211/wme.c: fix sparse warning wme.c triggers a sparse warning; it wasn't noticed before because until recently ARRAY_SIZE triggered a sparse error. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/wme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 89ce81529694..7ab82b376e1b 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -424,7 +424,7 @@ static int wme_qdiscop_init(struct Qdisc *qd, struct rtattr *opt) skb_queue_head_init(&q->requeued[i]); q->queues[i] = qdisc_create_dflt(qd->dev, &pfifo_qdisc_ops, qd->handle); - if (q->queues[i] == 0) { + if (!q->queues[i]) { q->queues[i] = &noop_qdisc; printk(KERN_ERR "%s child qdisc %i creation failed", dev->name, i); } -- cgit v1.2.3-58-ga151 From ca9938fea576ebbb8d8c4fbe8a5bcc937e49e1ca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Sep 2007 12:50:32 +0200 Subject: [PATCH] mac80211: fix initialisation when built-in When mac80211 is built into the kernel it needs to init earlier so that device registrations are run after it has initialised. The same applies to rate control algorithms. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211.c | 2 +- net/mac80211/rc80211_simple.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c index 7286c389a4d0..ff2172ffd861 100644 --- a/net/mac80211/ieee80211.c +++ b/net/mac80211/ieee80211.c @@ -5259,7 +5259,7 @@ static void __exit ieee80211_exit(void) } -module_init(ieee80211_init); +subsys_initcall(ieee80211_init); module_exit(ieee80211_exit); MODULE_DESCRIPTION("IEEE 802.11 subsystem"); diff --git a/net/mac80211/rc80211_simple.c b/net/mac80211/rc80211_simple.c index f6780d63b342..17b9f46bbf2b 100644 --- a/net/mac80211/rc80211_simple.c +++ b/net/mac80211/rc80211_simple.c @@ -431,7 +431,7 @@ static void __exit rate_control_simple_exit(void) } -module_init(rate_control_simple_init); +subsys_initcall(rate_control_simple_init); module_exit(rate_control_simple_exit); MODULE_DESCRIPTION("Simple rate control algorithm for ieee80211"); -- cgit v1.2.3-58-ga151 From a09c83847b664dcd67a72613374061c900afb799 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 5 Sep 2007 15:53:58 -0400 Subject: SCTP: Validate buffer room when processing sequential chunks When we process bundled chunks, we need to make sure that the skb has the buffer for each header since we assume it's always there. Some malicious node can send us something like DATA + 2 bytes and we'll try to walk off the end refrencing potentially uninitialized memory. Signed-off-by: Vlad Yasevich --- net/sctp/inqueue.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c index 88aa22407549..e4ea7fdf36ed 100644 --- a/net/sctp/inqueue.c +++ b/net/sctp/inqueue.c @@ -130,6 +130,14 @@ struct sctp_chunk *sctp_inq_pop(struct sctp_inq *queue) /* Force chunk->skb->data to chunk->chunk_end. */ skb_pull(chunk->skb, chunk->chunk_end - chunk->skb->data); + + /* Verify that we have at least chunk headers + * worth of buffer left. + */ + if (skb_headlen(chunk->skb) < sizeof(sctp_chunkhdr_t)) { + sctp_chunk_free(chunk); + chunk = queue->in_progress = NULL; + } } } -- cgit v1.2.3-58-ga151 From 02c4e12c6400b6dccdc6b5c2c18325551e4b2dc9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 31 Aug 2007 10:03:58 +0800 Subject: SCTP: Send ABORT chunk with correct tag in response to INIT ACK When SCTP client received an INIT ACK chunk with missing mandatory parameter such as "cookie parameter", it will send back a ABORT with T-bit not set and verification tag is set to 0. This is because before we accept this INIT ACK chunk, we do not know the peer's tag. This patch change to reflect vtag when responding to INIT ACK with missing mandatory parameter. Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich --- net/sctp/sm_statefuns.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 177528ed3e1b..385f1757158a 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -5176,7 +5176,22 @@ static struct sctp_packet *sctp_ootb_pkt_new(const struct sctp_association *asoc * association exists, otherwise, use the peer's vtag. */ if (asoc) { - vtag = asoc->peer.i.init_tag; + /* Special case the INIT-ACK as there is no peer's vtag + * yet. + */ + switch(chunk->chunk_hdr->type) { + case SCTP_CID_INIT_ACK: + { + sctp_initack_chunk_t *initack; + + initack = (sctp_initack_chunk_t *)chunk->chunk_hdr; + vtag = ntohl(initack->init_hdr.init_tag); + break; + } + default: + vtag = asoc->peer.i.init_tag; + break; + } } else { /* Special case the INIT and stale COOKIE_ECHO as there is no * vtag yet. -- cgit v1.2.3-58-ga151 From d3f259687fd248aa4de477149481478c122ba48b Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 7 Sep 2007 11:47:45 -0400 Subject: SCTP: Explicitely discard OOTB chunks Explicitely discard OOTB chunks, whether the result is a SHUTDOWN COMPLETE or an ABORT. We need to discard the OOTB SHUTDOWN ACK to prevent bombing attackes since responsed MUST NOT be bundled. We also explicietely discard in the ABORT case since that function is widely used internally. Signed-off-by: Vlad Yasevich Acked-by: Neil Horman --- net/sctp/sm_statefuns.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 385f1757158a..5e7fb0f54b88 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -2965,6 +2965,7 @@ sctp_disposition_t sctp_sf_tabort_8_4_8(const struct sctp_endpoint *ep, SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); + sctp_sf_pdiscard(ep, asoc, type, arg, commands); return SCTP_DISPOSITION_CONSUME; } @@ -3148,11 +3149,9 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep, } while (ch_end < skb_tail_pointer(skb)); if (ootb_shut_ack) - sctp_sf_shut_8_4_5(ep, asoc, type, arg, commands); + return sctp_sf_shut_8_4_5(ep, asoc, type, arg, commands); else - sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands); - - return sctp_sf_pdiscard(ep, asoc, type, arg, commands); + return sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands); } /* @@ -3218,7 +3217,11 @@ static sctp_disposition_t sctp_sf_shut_8_4_5(const struct sctp_endpoint *ep, if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) return sctp_sf_pdiscard(ep, asoc, type, arg, commands); - return SCTP_DISPOSITION_CONSUME; + /* We need to discard the rest of the packet to prevent + * potential bomming attacks from additional bundled chunks. + * This is documented in SCTP Threats ID. + */ + return sctp_sf_pdiscard(ep, asoc, type, arg, commands); } return SCTP_DISPOSITION_NOMEM; -- cgit v1.2.3-58-ga151 From ece25dfa0991f65c4e1d26beb1c3c45bda4239b8 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 7 Sep 2007 16:30:54 -0400 Subject: SCTP: Clean up OOTB handling and fix infinite loop processing While processing OOTB chunks as well as chunks with an invalid length of 0, it was possible to SCTP to get wedged inside an infinite loop because we didn't catch the condition correctly, or didn't mark the packet for discard correctly. This work is based on original findings and work by Wei Yongjun Signed-off-by: Vlad Yasevich --- include/net/sctp/sm.h | 1 - net/sctp/sm_statefuns.c | 163 +++++++++++++++++++++++++++++++++++++---------- net/sctp/sm_statetable.c | 16 ++--- 3 files changed, 138 insertions(+), 42 deletions(-) diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 991c85bb9e36..cc71f366d1cd 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -114,7 +114,6 @@ sctp_state_fn_t sctp_sf_do_4_C; sctp_state_fn_t sctp_sf_eat_data_6_2; sctp_state_fn_t sctp_sf_eat_data_fast_4_4; sctp_state_fn_t sctp_sf_eat_sack_6_2; -sctp_state_fn_t sctp_sf_tabort_8_4_8; sctp_state_fn_t sctp_sf_operr_notify; sctp_state_fn_t sctp_sf_t1_init_timer_expire; sctp_state_fn_t sctp_sf_t1_cookie_timer_expire; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 5e7fb0f54b88..caed19d90d06 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -90,6 +90,11 @@ static sctp_disposition_t sctp_sf_shut_8_4_5(const struct sctp_endpoint *ep, const sctp_subtype_t type, void *arg, sctp_cmd_seq_t *commands); +static sctp_disposition_t sctp_sf_tabort_8_4_8(const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands); static struct sctp_sackhdr *sctp_sm_pull_sack(struct sctp_chunk *chunk); static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands, @@ -98,6 +103,7 @@ static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands, struct sctp_transport *transport); static sctp_disposition_t sctp_sf_abort_violation( + const struct sctp_endpoint *ep, const struct sctp_association *asoc, void *arg, sctp_cmd_seq_t *commands, @@ -118,6 +124,13 @@ static sctp_disposition_t sctp_sf_violation_ctsn( void *arg, sctp_cmd_seq_t *commands); +static sctp_disposition_t sctp_sf_violation_chunk( + const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands); + /* Small helper function that checks if the chunk length * is of the appropriate length. The 'required_length' argument * is set to be the size of a specific chunk we are testing. @@ -181,16 +194,21 @@ sctp_disposition_t sctp_sf_do_4_C(const struct sctp_endpoint *ep, struct sctp_chunk *chunk = arg; struct sctp_ulpevent *ev; + if (!sctp_vtag_verify_either(chunk, asoc)) + return sctp_sf_pdiscard(ep, asoc, type, arg, commands); + /* RFC 2960 6.10 Bundling * * An endpoint MUST NOT bundle INIT, INIT ACK or * SHUTDOWN COMPLETE with any other chunks. */ if (!chunk->singleton) - return SCTP_DISPOSITION_VIOLATION; + return sctp_sf_violation_chunk(ep, asoc, type, arg, commands); - if (!sctp_vtag_verify_either(chunk, asoc)) - return sctp_sf_pdiscard(ep, asoc, type, arg, commands); + /* Make sure that the SHUTDOWN_COMPLETE chunk has a valid length. */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); /* RFC 2960 10.2 SCTP-to-ULP * @@ -450,17 +468,17 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep, if (!sctp_vtag_verify(chunk, asoc)) return sctp_sf_pdiscard(ep, asoc, type, arg, commands); - /* Make sure that the INIT-ACK chunk has a valid length */ - if (!sctp_chunk_length_valid(chunk, sizeof(sctp_initack_chunk_t))) - return sctp_sf_violation_chunklen(ep, asoc, type, arg, - commands); /* 6.10 Bundling * An endpoint MUST NOT bundle INIT, INIT ACK or * SHUTDOWN COMPLETE with any other chunks. */ if (!chunk->singleton) - return SCTP_DISPOSITION_VIOLATION; + return sctp_sf_violation_chunk(ep, asoc, type, arg, commands); + /* Make sure that the INIT-ACK chunk has a valid length */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_initack_chunk_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); /* Grab the INIT header. */ chunk->subh.init_hdr = (sctp_inithdr_t *) chunk->skb->data; @@ -585,7 +603,7 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(const struct sctp_endpoint *ep, * control endpoint, respond with an ABORT. */ if (ep == sctp_sk((sctp_get_ctl_sock()))->ep) - return sctp_sf_ootb(ep, asoc, type, arg, commands); + return sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands); /* Make sure that the COOKIE_ECHO chunk has a valid length. * In this case, we check that we have enough for at least a @@ -2496,6 +2514,11 @@ sctp_disposition_t sctp_sf_do_9_2_reshutack(const struct sctp_endpoint *ep, struct sctp_chunk *chunk = (struct sctp_chunk *) arg; struct sctp_chunk *reply; + /* Make sure that the chunk has a valid length */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + /* Since we are not going to really process this INIT, there * is no point in verifying chunk boundries. Just generate * the SHUTDOWN ACK. @@ -2929,7 +2952,7 @@ sctp_disposition_t sctp_sf_eat_sack_6_2(const struct sctp_endpoint *ep, * * The return value is the disposition of the chunk. */ -sctp_disposition_t sctp_sf_tabort_8_4_8(const struct sctp_endpoint *ep, +static sctp_disposition_t sctp_sf_tabort_8_4_8(const struct sctp_endpoint *ep, const struct sctp_association *asoc, const sctp_subtype_t type, void *arg, @@ -3126,14 +3149,14 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep, ch = (sctp_chunkhdr_t *) chunk->chunk_hdr; do { - /* Break out if chunk length is less then minimal. */ + /* Report violation if the chunk is less then minimal */ if (ntohs(ch->length) < sizeof(sctp_chunkhdr_t)) - break; - - ch_end = ((__u8 *)ch) + WORD_ROUND(ntohs(ch->length)); - if (ch_end > skb_tail_pointer(skb)) - break; + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + /* Now that we know we at least have a chunk header, + * do things that are type appropriate. + */ if (SCTP_CID_SHUTDOWN_ACK == ch->type) ootb_shut_ack = 1; @@ -3145,6 +3168,12 @@ sctp_disposition_t sctp_sf_ootb(const struct sctp_endpoint *ep, if (SCTP_CID_ABORT == ch->type) return sctp_sf_pdiscard(ep, asoc, type, arg, commands); + /* Report violation if chunk len overflows */ + ch_end = ((__u8 *)ch) + WORD_ROUND(ntohs(ch->length)); + if (ch_end > skb_tail_pointer(skb)) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + ch = (sctp_chunkhdr_t *) ch_end; } while (ch_end < skb_tail_pointer(skb)); @@ -3244,6 +3273,13 @@ sctp_disposition_t sctp_sf_do_8_5_1_E_sa(const struct sctp_endpoint *ep, void *arg, sctp_cmd_seq_t *commands) { + struct sctp_chunk *chunk = arg; + + /* Make sure that the SHUTDOWN_ACK chunk has a valid length. */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + /* Although we do have an association in this case, it corresponds * to a restarted association. So the packet is treated as an OOTB * packet and the state function that handles OOTB SHUTDOWN_ACK is @@ -3658,6 +3694,16 @@ sctp_disposition_t sctp_sf_discard_chunk(const struct sctp_endpoint *ep, void *arg, sctp_cmd_seq_t *commands) { + struct sctp_chunk *chunk = arg; + + /* Make sure that the chunk has a valid length. + * Since we don't know the chunk type, we use a general + * chunkhdr structure to make a comparison. + */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + SCTP_DEBUG_PRINTK("Chunk %d is discarded\n", type.chunk); return SCTP_DISPOSITION_DISCARD; } @@ -3713,6 +3759,13 @@ sctp_disposition_t sctp_sf_violation(const struct sctp_endpoint *ep, void *arg, sctp_cmd_seq_t *commands) { + struct sctp_chunk *chunk = arg; + + /* Make sure that the chunk has a valid length. */ + if (!sctp_chunk_length_valid(chunk, sizeof(sctp_chunkhdr_t))) + return sctp_sf_violation_chunklen(ep, asoc, type, arg, + commands); + return SCTP_DISPOSITION_VIOLATION; } @@ -3720,12 +3773,14 @@ sctp_disposition_t sctp_sf_violation(const struct sctp_endpoint *ep, * Common function to handle a protocol violation. */ static sctp_disposition_t sctp_sf_abort_violation( + const struct sctp_endpoint *ep, const struct sctp_association *asoc, void *arg, sctp_cmd_seq_t *commands, const __u8 *payload, const size_t paylen) { + struct sctp_packet *packet = NULL; struct sctp_chunk *chunk = arg; struct sctp_chunk *abort = NULL; @@ -3734,30 +3789,51 @@ static sctp_disposition_t sctp_sf_abort_violation( if (!abort) goto nomem; - sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); - SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); + if (asoc) { + sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort)); + SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); - if (asoc->state <= SCTP_STATE_COOKIE_ECHOED) { - sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP, - SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT)); - sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, - SCTP_ERROR(ECONNREFUSED)); - sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED, - SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); + if (asoc->state <= SCTP_STATE_COOKIE_ECHOED) { + sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP, + SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT)); + sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, + SCTP_ERROR(ECONNREFUSED)); + sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED, + SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); + } else { + sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, + SCTP_ERROR(ECONNABORTED)); + sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, + SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); + SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); + } } else { - sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, - SCTP_ERROR(ECONNABORTED)); - sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, - SCTP_PERR(SCTP_ERROR_PROTO_VIOLATION)); - SCTP_DEC_STATS(SCTP_MIB_CURRESTAB); + packet = sctp_ootb_pkt_new(asoc, chunk); + + if (!packet) + goto nomem_pkt; + + if (sctp_test_T_bit(abort)) + packet->vtag = ntohl(chunk->sctp_hdr->vtag); + + abort->skb->sk = ep->base.sk; + + sctp_packet_append_chunk(packet, abort); + + sctp_add_cmd_sf(commands, SCTP_CMD_SEND_PKT, + SCTP_PACKET(packet)); + + SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS); } - sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET, SCTP_NULL()); + sctp_sf_pdiscard(ep, asoc, SCTP_ST_CHUNK(0), arg, commands); SCTP_INC_STATS(SCTP_MIB_ABORTEDS); return SCTP_DISPOSITION_ABORT; +nomem_pkt: + sctp_chunk_free(abort); nomem: return SCTP_DISPOSITION_NOMEM; } @@ -3790,7 +3866,7 @@ static sctp_disposition_t sctp_sf_violation_chunklen( { char err_str[]="The following chunk had invalid length:"; - return sctp_sf_abort_violation(asoc, arg, commands, err_str, + return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, sizeof(err_str)); } @@ -3809,10 +3885,31 @@ static sctp_disposition_t sctp_sf_violation_ctsn( { char err_str[]="The cumulative tsn ack beyond the max tsn currently sent:"; - return sctp_sf_abort_violation(asoc, arg, commands, err_str, + return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, sizeof(err_str)); } +/* Handle protocol violation of an invalid chunk bundling. For example, + * when we have an association and we recieve bundled INIT-ACK, or + * SHUDOWN-COMPLETE, our peer is clearly violationg the "MUST NOT bundle" + * statement from the specs. Additinally, there might be an attacker + * on the path and we may not want to continue this communication. + */ +static sctp_disposition_t sctp_sf_violation_chunk( + const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands) +{ + char err_str[]="The following chunk violates protocol:"; + + if (!asoc) + return sctp_sf_violation(ep, asoc, type, arg, commands); + + return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, + sizeof(err_str)); +} /*************************************************************************** * These are the state functions for handling primitive (Section 10) events. ***************************************************************************/ diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c index 70a91ece3c49..ddb0ba3974b0 100644 --- a/net/sctp/sm_statetable.c +++ b/net/sctp/sm_statetable.c @@ -110,7 +110,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -173,7 +173,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -194,7 +194,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -216,7 +216,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_violation), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -258,7 +258,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -300,7 +300,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type, /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -499,7 +499,7 @@ static const sctp_sm_table_entry_t addip_chunk_event_table[SCTP_NUM_ADDIP_CHUNK_ /* SCTP_STATE_EMPTY */ \ TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_CLOSED */ \ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), \ + TYPE_SCTP_FUNC(sctp_sf_ootb), \ /* SCTP_STATE_COOKIE_WAIT */ \ TYPE_SCTP_FUNC(sctp_sf_discard_chunk), \ /* SCTP_STATE_COOKIE_ECHOED */ \ @@ -528,7 +528,7 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = { /* SCTP_STATE_EMPTY */ TYPE_SCTP_FUNC(sctp_sf_ootb), /* SCTP_STATE_CLOSED */ - TYPE_SCTP_FUNC(sctp_sf_tabort_8_4_8), + TYPE_SCTP_FUNC(sctp_sf_ootb), /* SCTP_STATE_COOKIE_WAIT */ TYPE_SCTP_FUNC(sctp_sf_unk_chunk), /* SCTP_STATE_COOKIE_ECHOED */ -- cgit v1.2.3-58-ga151 From 3c77f961b55b6060858c68a213d7f4470d7f3eb2 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 17 Sep 2007 15:14:28 -0400 Subject: SCTP: Discard OOTB packetes with bundled INIT early. RFC 4460 and future RFC 4960 (2960-bis) specify that packets with bundled INIT chunks need to be dropped. We currenlty do that only after processing any leading chunks. For OOTB chunks, since we already walk the entire packet, we should discard packets with bundled INITs. There are other chunks chunks that MUST NOT be bundled, but the spec is silent on theire treatment. Thus, we'll leave their teatment alone for the moment. Signed-off-by: Vlad Yasevich Acked-by: Wei Yongjun --- net/sctp/input.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/sctp/input.c b/net/sctp/input.c index 47e56017f4ce..f9a0c9276e3b 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -622,6 +622,14 @@ static int sctp_rcv_ootb(struct sk_buff *skb) if (SCTP_CID_SHUTDOWN_COMPLETE == ch->type) goto discard; + /* RFC 4460, 2.11.2 + * This will discard packets with INIT chunk bundled as + * subsequent chunks in the packet. When INIT is first, + * the normal INIT processing will discard the chunk. + */ + if (SCTP_CID_INIT == ch->type && (void *)ch != skb->data) + goto discard; + /* RFC 8.4, 7) If the packet contains a "Stale cookie" ERROR * or a COOKIE ACK the SCTP Packet should be silently * discarded. -- cgit v1.2.3-58-ga151 From 6f4c618ddb0e6b7e6d49cfc8134e694be1c0bc9b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 19 Sep 2007 17:19:52 +0800 Subject: SCTP : Add paramters validity check for ASCONF chunk If ADDIP is enabled, when an ASCONF chunk is received with ASCONF paramter length set to zero, this will cause infinite loop. By the way, if an malformed ASCONF chunk is received, will cause processing to access memory without verifying. This is because of not check the validity of parameters in ASCONF chunk. This patch fixed this. Signed-off-by: Wei Yongjun Signed-off-by: Vlad Yasevich --- include/net/sctp/sm.h | 3 +++ include/net/sctp/structs.h | 1 + net/sctp/sm_make_chunk.c | 46 ++++++++++++++++++++++++++++++++++++++++++ net/sctp/sm_statefuns.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 100 insertions(+) diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index cc71f366d1cd..e8e3a64eb322 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -246,6 +246,9 @@ struct sctp_chunk *sctp_make_asconf_update_ip(struct sctp_association *, int, __be16); struct sctp_chunk *sctp_make_asconf_set_prim(struct sctp_association *asoc, union sctp_addr *addr); +int sctp_verify_asconf(const struct sctp_association *asoc, + struct sctp_paramhdr *param_hdr, void *chunk_end, + struct sctp_paramhdr **errp); struct sctp_chunk *sctp_process_asconf(struct sctp_association *asoc, struct sctp_chunk *asconf); int sctp_process_asconf_ack(struct sctp_association *asoc, diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index c2fe2dcc9afc..490a2928817c 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -421,6 +421,7 @@ struct sctp_signed_cookie { * internally. */ union sctp_addr_param { + struct sctp_paramhdr p; struct sctp_ipv4addr_param v4; struct sctp_ipv6addr_param v6; }; diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 2e34220d94cd..23ae37ec8711 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -2499,6 +2499,52 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc, return SCTP_ERROR_NO_ERROR; } +/* Verify the ASCONF packet before we process it. */ +int sctp_verify_asconf(const struct sctp_association *asoc, + struct sctp_paramhdr *param_hdr, void *chunk_end, + struct sctp_paramhdr **errp) { + sctp_addip_param_t *asconf_param; + union sctp_params param; + int length, plen; + + param.v = (sctp_paramhdr_t *) param_hdr; + while (param.v <= chunk_end - sizeof(sctp_paramhdr_t)) { + length = ntohs(param.p->length); + *errp = param.p; + + if (param.v > chunk_end - length || + length < sizeof(sctp_paramhdr_t)) + return 0; + + switch (param.p->type) { + case SCTP_PARAM_ADD_IP: + case SCTP_PARAM_DEL_IP: + case SCTP_PARAM_SET_PRIMARY: + asconf_param = (sctp_addip_param_t *)param.v; + plen = ntohs(asconf_param->param_hdr.length); + if (plen < sizeof(sctp_addip_param_t) + + sizeof(sctp_paramhdr_t)) + return 0; + break; + case SCTP_PARAM_SUCCESS_REPORT: + case SCTP_PARAM_ADAPTATION_LAYER_IND: + if (length != sizeof(sctp_addip_param_t)) + return 0; + + break; + default: + break; + } + + param.v += WORD_ROUND(length); + } + + if (param.v != chunk_end) + return 0; + + return 1; +} + /* Process an incoming ASCONF chunk with the next expected serial no. and * return an ASCONF_ACK chunk to be sent in response. */ diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index caed19d90d06..a583d67cab63 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -117,6 +117,13 @@ static sctp_disposition_t sctp_sf_violation_chunklen( void *arg, sctp_cmd_seq_t *commands); +static sctp_disposition_t sctp_sf_violation_paramlen( + const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands); + static sctp_disposition_t sctp_sf_violation_ctsn( const struct sctp_endpoint *ep, const struct sctp_association *asoc, @@ -3296,8 +3303,11 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, { struct sctp_chunk *chunk = arg; struct sctp_chunk *asconf_ack = NULL; + struct sctp_paramhdr *err_param = NULL; sctp_addiphdr_t *hdr; + union sctp_addr_param *addr_param; __u32 serial; + int length; if (!sctp_vtag_verify(chunk, asoc)) { sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_BAD_TAG, @@ -3313,6 +3323,20 @@ sctp_disposition_t sctp_sf_do_asconf(const struct sctp_endpoint *ep, hdr = (sctp_addiphdr_t *)chunk->skb->data; serial = ntohl(hdr->serial); + addr_param = (union sctp_addr_param *)hdr->params; + length = ntohs(addr_param->p.length); + if (length < sizeof(sctp_paramhdr_t)) + return sctp_sf_violation_paramlen(ep, asoc, type, + (void *)addr_param, commands); + + /* Verify the ASCONF chunk before processing it. */ + if (!sctp_verify_asconf(asoc, + (sctp_paramhdr_t *)((void *)addr_param + length), + (void *)chunk->chunk_end, + &err_param)) + return sctp_sf_violation_paramlen(ep, asoc, type, + (void *)&err_param, commands); + /* ADDIP 4.2 C1) Compare the value of the serial number to the value * the endpoint stored in a new association variable * 'Peer-Serial-Number'. @@ -3367,6 +3391,7 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep, struct sctp_chunk *asconf_ack = arg; struct sctp_chunk *last_asconf = asoc->addip_last_asconf; struct sctp_chunk *abort; + struct sctp_paramhdr *err_param = NULL; sctp_addiphdr_t *addip_hdr; __u32 sent_serial, rcvd_serial; @@ -3384,6 +3409,14 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep, addip_hdr = (sctp_addiphdr_t *)asconf_ack->skb->data; rcvd_serial = ntohl(addip_hdr->serial); + /* Verify the ASCONF-ACK chunk before processing it. */ + if (!sctp_verify_asconf(asoc, + (sctp_paramhdr_t *)addip_hdr->params, + (void *)asconf_ack->chunk_end, + &err_param)) + return sctp_sf_violation_paramlen(ep, asoc, type, + (void *)&err_param, commands); + if (last_asconf) { addip_hdr = (sctp_addiphdr_t *)last_asconf->subh.addip_hdr; sent_serial = ntohl(addip_hdr->serial); @@ -3870,6 +3903,23 @@ static sctp_disposition_t sctp_sf_violation_chunklen( sizeof(err_str)); } +/* + * Handle a protocol violation when the parameter length is invalid. + * "Invalid" length is identified as smaller then the minimal length a + * given parameter can be. + */ +static sctp_disposition_t sctp_sf_violation_paramlen( + const struct sctp_endpoint *ep, + const struct sctp_association *asoc, + const sctp_subtype_t type, + void *arg, + sctp_cmd_seq_t *commands) { + char err_str[] = "The following parameter had invalid length:"; + + return sctp_sf_abort_violation(ep, asoc, arg, commands, err_str, + sizeof(err_str)); +} + /* Handle a protocol violation when the peer trying to advance the * cumulative tsn ack to a point beyond the max tsn currently sent. * -- cgit v1.2.3-58-ga151 From 45dfd5b5dd20f17fe23dafc5cfe921474d27f849 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Tue, 25 Sep 2007 23:05:39 -0700 Subject: [PPP_MPPE]: Don't put InterimKey on the stack Signed-off-by: Michal Schmidt Signed-off-by: David S. Miller --- drivers/net/ppp_mppe.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c index f79cf87a2bff..c0b6d19d1457 100644 --- a/drivers/net/ppp_mppe.c +++ b/drivers/net/ppp_mppe.c @@ -136,7 +136,7 @@ struct ppp_mppe_state { * Key Derivation, from RFC 3078, RFC 3079. * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079. */ -static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *InterimKey) +static void get_new_key_from_sha(struct ppp_mppe_state * state) { struct hash_desc desc; struct scatterlist sg[4]; @@ -153,8 +153,6 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I desc.flags = 0; crypto_hash_digest(&desc, sg, nbytes, state->sha1_digest); - - memcpy(InterimKey, state->sha1_digest, state->keylen); } /* @@ -163,21 +161,21 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I */ static void mppe_rekey(struct ppp_mppe_state * state, int initial_key) { - unsigned char InterimKey[MPPE_MAX_KEY_LEN]; struct scatterlist sg_in[1], sg_out[1]; struct blkcipher_desc desc = { .tfm = state->arc4 }; - get_new_key_from_sha(state, InterimKey); + get_new_key_from_sha(state); if (!initial_key) { - crypto_blkcipher_setkey(state->arc4, InterimKey, state->keylen); - setup_sg(sg_in, InterimKey, state->keylen); + crypto_blkcipher_setkey(state->arc4, state->sha1_digest, + state->keylen); + setup_sg(sg_in, state->sha1_digest, state->keylen); setup_sg(sg_out, state->session_key, state->keylen); if (crypto_blkcipher_encrypt(&desc, sg_out, sg_in, state->keylen) != 0) { printk(KERN_WARNING "mppe_rekey: cipher_encrypt failed\n"); } } else { - memcpy(state->session_key, InterimKey, state->keylen); + memcpy(state->session_key, state->sha1_digest, state->keylen); } if (state->keylen == 8) { /* See RFC 3078 */ -- cgit v1.2.3-58-ga151 From ae3ba4fd966e38d8d766d19f7a58b551df8ecc97 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Sep 2007 08:20:44 +0200 Subject: cdrom_open() forgets to unlock on -EROFS failure exits Signed-off-by: Al Viro Signed-off-by: Jens Axboe --- drivers/cdrom/cdrom.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 67ee3d4b2878..79245714f0a7 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -1032,6 +1032,10 @@ int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp) check_disk_change(ip->i_bdev); return 0; err_release: + if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) { + cdi->ops->lock_door(cdi, 0); + cdinfo(CD_OPEN, "door unlocked.\n"); + } cdi->ops->release(cdi); err: cdi->use_count--; -- cgit v1.2.3-58-ga151 From 603c461250b223ac42c10b8d1df653af1a361d44 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Wed, 26 Sep 2007 10:53:45 +1000 Subject: [POWERPC] spufs: fix mismerge, making context signal{1,2} files readable again The commit 8b6f50ef1d5cc86b278eb42bc91630fad455fb10 seems to have been affected by a mismerge of a duplicate patch (d054b36ffd302ec65aabec16a0c60ddd9e6b5a62) - both the spufs_dir_contents and spufs_dir_nosched_contents have been given write-only signal notification files. This change reverts the spufs_dir_contents array to use the readable signal notification file implementation. Signed-off-by: Jeremy Kerr Acked-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 4100ddc52f02..7de4e919687b 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -2177,8 +2177,8 @@ struct tree_descr spufs_dir_contents[] = { { "mbox_stat", &spufs_mbox_stat_fops, 0444, }, { "ibox_stat", &spufs_ibox_stat_fops, 0444, }, { "wbox_stat", &spufs_wbox_stat_fops, 0444, }, - { "signal1", &spufs_signal1_nosched_fops, 0222, }, - { "signal2", &spufs_signal2_nosched_fops, 0222, }, + { "signal1", &spufs_signal1_fops, 0666, }, + { "signal2", &spufs_signal2_fops, 0666, }, { "signal1_type", &spufs_signal1_type, 0666, }, { "signal2_type", &spufs_signal2_type, 0666, }, { "cntl", &spufs_cntl_fops, 0666, }, -- cgit v1.2.3-58-ga151 From 5309809129ca3ab14f8bd5e5ef66c1b7686eb639 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Sep 2007 09:16:21 -0700 Subject: Add explicit zeroing to "envp" array in device 'show' method As Stephen Hemminger says, this is a "belt and suspenders" patch that zeroes the envp array at allocation time, even though all the users should NULL-terminate it anyway (and we've hopefully fixed everybody that doesn't do that). And we'll apparently clean the whole envp thing up for 2.6.24 anyway. But let's just be robust, and do both this *and* make sure that all users are doing the right thing. Acked-by: Stephen Hemminger Acked-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/base/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 6de33d7a29ba..67c92582d6ef 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -284,6 +284,7 @@ static ssize_t show_uevent(struct device *dev, struct device_attribute *attr, /* let the kset specific function add its keys */ pos = data; + memset(envp, 0, sizeof(envp)); retval = kset->uevent_ops->uevent(kset, &dev->kobj, envp, ARRAY_SIZE(envp), pos, PAGE_SIZE); -- cgit v1.2.3-58-ga151 From ed4d6375a1498009a9e68d93661207351d36874f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Sep 2007 01:53:42 +0100 Subject: usbvision-video: buggered method tables duplicated .mmap in one, .vidioc_s_audio misspelled as .vidioc_g_audio in other Signed-off-by: Al Viro Acked-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/video/usbvision/usbvision-video.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index e3371f972240..0cb006f2943d 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1387,7 +1387,6 @@ static const struct file_operations usbvision_fops = { .ioctl = video_ioctl2, .llseek = no_llseek, /* .poll = video_poll, */ - .mmap = usbvision_v4l2_mmap, .compat_ioctl = v4l_compat_ioctl32, }; static struct video_device usbvision_video_template = { @@ -1413,7 +1412,7 @@ static struct video_device usbvision_video_template = { .vidioc_s_input = vidioc_s_input, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_audio = vidioc_g_audio, - .vidioc_g_audio = vidioc_s_audio, + .vidioc_s_audio = vidioc_s_audio, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, @@ -1459,7 +1458,7 @@ static struct video_device usbvision_radio_template= .vidioc_s_input = vidioc_s_input, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_audio = vidioc_g_audio, - .vidioc_g_audio = vidioc_s_audio, + .vidioc_s_audio = vidioc_s_audio, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_g_tuner = vidioc_g_tuner, -- cgit v1.2.3-58-ga151 From d8c4a2f9d9e7827362fd7ab0b5d9637c6af5ac5b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Sep 2007 01:53:52 +0100 Subject: mv643xx_eth: duplicate methods in initializer Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/mv643xx_eth.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 6a117e9968cb..456d1e1c98bd 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2768,8 +2768,6 @@ static const struct ethtool_ops mv643xx_ethtool_ops = { .get_stats_count = mv643xx_get_stats_count, .get_ethtool_stats = mv643xx_get_ethtool_stats, .get_strings = mv643xx_get_strings, - .get_stats_count = mv643xx_get_stats_count, - .get_ethtool_stats = mv643xx_get_ethtool_stats, .nway_reset = mv643xx_eth_nway_restart, }; -- cgit v1.2.3-58-ga151 From 459685c75b82a0431da102365d507fdb72858b84 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Sep 2007 01:54:12 +0100 Subject: hibernation doesn't even build on frv - tons of helpers are missing Signed-off-by: Al Viro Acked-By: David Howells Signed-off-by: Linus Torvalds --- kernel/power/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index c8580a1e6873..14b0e10dc95c 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -110,7 +110,7 @@ config SUSPEND config HIBERNATION_UP_POSSIBLE bool - depends on X86 || PPC64_SWSUSP || FRV || PPC32 + depends on X86 || PPC64_SWSUSP || PPC32 depends on !SMP default y -- cgit v1.2.3-58-ga151 From 78bd8fbbcd66fc977baa40e7fd838a4461b0f727 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 26 Sep 2007 01:54:32 +0100 Subject: fix sctp_del_bind_addr() last argument type It gets pointer to fastcall function, expects a pointer to normal one and calls the sucker. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- include/net/sctp/structs.h | 2 +- net/sctp/bind_addr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 490a2928817c..baff49dfcdbd 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1157,7 +1157,7 @@ int sctp_bind_addr_copy(struct sctp_bind_addr *dest, int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *, __u8 use_as_src, gfp_t gfp); int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *, - void (*rcu_call)(struct rcu_head *, + void fastcall (*rcu_call)(struct rcu_head *, void (*func)(struct rcu_head *))); int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *, struct sctp_sock *); diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index d35cbf5aae33..dfffa94fb9f6 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -181,7 +181,7 @@ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, * structure. */ int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr, - void (*rcu_call)(struct rcu_head *head, + void fastcall (*rcu_call)(struct rcu_head *head, void (*func)(struct rcu_head *head))) { struct sctp_sockaddr_entry *addr, *temp; -- cgit v1.2.3-58-ga151 From f6a592e8abd2f2394623ce5427cbb4c265495974 Mon Sep 17 00:00:00 2001 From: Chris Malley Date: Wed, 26 Sep 2007 14:19:18 +1000 Subject: lguest example launcher truncates block device file to 0 length on problems The function should also use ftruncate64() rather than ftruncate() to prevent files over 4GB (not uncommon for a root filesystem) being zeroed. Signed-off-by: Chris Malley Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- Documentation/lguest/lguest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index f7918401a007..73c5f1f3d5d2 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -882,7 +882,7 @@ static u32 handle_block_output(int fd, const struct iovec *iov, * of the block file (possibly extending it). */ if (off + len > device_len) { /* Trim it back to the correct length */ - ftruncate(dev->fd, device_len); + ftruncate64(dev->fd, device_len); /* Die, bad Guest, die. */ errx(1, "Write past end %llu+%u", off, len); } -- cgit v1.2.3-58-ga151 From 255129d1e9ca0ed3d69d5517fae3e03d7ab4b806 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 25 Sep 2007 15:55:03 -0400 Subject: NLM: Fix a circular lock dependency in lockd The problem is that the garbage collector for the 'host' structures nlm_gc_hosts(), holds nlm_host_mutex while calling down to nlmsvc_mark_resources, which, eventually takes the file->f_mutex. We cannot therefore call nlmsvc_lookup_host() from within nlmsvc_create_block, since the caller will already hold file->f_mutex, so the attempt to grab nlm_host_mutex may deadlock. Fix the problem by calling nlmsvc_lookup_host() outside the file->f_mutex. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- fs/lockd/svclock.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c index a21e4bc5444b..d098c7af0d22 100644 --- a/fs/lockd/svclock.c +++ b/fs/lockd/svclock.c @@ -171,19 +171,14 @@ found: * GRANTED_RES message by cookie, without having to rely on the client's IP * address. --okir */ -static inline struct nlm_block * -nlmsvc_create_block(struct svc_rqst *rqstp, struct nlm_file *file, - struct nlm_lock *lock, struct nlm_cookie *cookie) +static struct nlm_block * +nlmsvc_create_block(struct svc_rqst *rqstp, struct nlm_host *host, + struct nlm_file *file, struct nlm_lock *lock, + struct nlm_cookie *cookie) { struct nlm_block *block; - struct nlm_host *host; struct nlm_rqst *call = NULL; - /* Create host handle for callback */ - host = nlmsvc_lookup_host(rqstp, lock->caller, lock->len); - if (host == NULL) - return NULL; - call = nlm_alloc_call(host); if (call == NULL) return NULL; @@ -366,6 +361,7 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, struct nlm_lock *lock, int wait, struct nlm_cookie *cookie) { struct nlm_block *block = NULL; + struct nlm_host *host; int error; __be32 ret; @@ -377,6 +373,10 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, (long long)lock->fl.fl_end, wait); + /* Create host handle for callback */ + host = nlmsvc_lookup_host(rqstp, lock->caller, lock->len); + if (host == NULL) + return nlm_lck_denied_nolocks; /* Lock file against concurrent access */ mutex_lock(&file->f_mutex); @@ -385,7 +385,8 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, */ block = nlmsvc_lookup_block(file, lock); if (block == NULL) { - block = nlmsvc_create_block(rqstp, file, lock, cookie); + block = nlmsvc_create_block(rqstp, nlm_get_host(host), file, + lock, cookie); ret = nlm_lck_denied_nolocks; if (block == NULL) goto out; @@ -449,6 +450,7 @@ nlmsvc_lock(struct svc_rqst *rqstp, struct nlm_file *file, out: mutex_unlock(&file->f_mutex); nlmsvc_release_block(block); + nlm_release_host(host); dprintk("lockd: nlmsvc_lock returned %u\n", ret); return ret; } @@ -477,10 +479,15 @@ nlmsvc_testlock(struct svc_rqst *rqstp, struct nlm_file *file, if (block == NULL) { struct file_lock *conf = kzalloc(sizeof(*conf), GFP_KERNEL); + struct nlm_host *host; if (conf == NULL) return nlm_granted; - block = nlmsvc_create_block(rqstp, file, lock, cookie); + /* Create host handle for callback */ + host = nlmsvc_lookup_host(rqstp, lock->caller, lock->len); + if (host == NULL) + return nlm_lck_denied_nolocks; + block = nlmsvc_create_block(rqstp, host, file, lock, cookie); if (block == NULL) { kfree(conf); return nlm_granted; -- cgit v1.2.3-58-ga151 From 3dffec45c2742961dd27f55aba426cb9cf3f0dcd Mon Sep 17 00:00:00 2001 From: "S.Çağlar Onur" Date: Wed, 26 Sep 2007 12:15:33 +0300 Subject: Silent drivers/char/hpet.c build warnings on i386 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Following patch silents; ... drivers/char/hpet.c:72: warning: 'clocksource_hpet' defined but not used drivers/char/hpet.c:81: warning: 'hpet_clocksource' defined but not used ... build warnings on i386, they appeared after commit 3b2b64fd311c92f2137eb7cee7025794cd854057 Signed-off-by: S.Çağlar Onur Signed-off-by: Linus Torvalds -- drivers/char/hpet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) --- drivers/char/hpet.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index fd51554ab081..4c16778e3f84 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -62,6 +62,8 @@ static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ; +/* This clocksource driver currently only works on ia64 */ +#ifdef CONFIG_IA64 static void __iomem *hpet_mctr; static cycle_t read_hpet(void) @@ -79,6 +81,7 @@ static struct clocksource clocksource_hpet = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static struct clocksource *hpet_clocksource; +#endif /* A lock for concurrent access by app and isr hpet activity. */ static DEFINE_SPINLOCK(hpet_lock); -- cgit v1.2.3-58-ga151 From e66485d747505e9d960b864fc6c37f8b2afafaf0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 25 Sep 2007 21:37:01 +0200 Subject: x86-64: Disable local APIC timer use on AMD systems with C1E commit 3556ddfa9284a86a59a9b78fe5894430f6ab4eef titled [PATCH] x86-64: Disable local APIC timer use on AMD systems with C1E solves a problem with AMD dual core laptops e.g. HP nx6325 (Turion 64 X2) with C1E enabled: When both cores go into idle at the same time, then the system switches into C1E state, which is basically the same as C3. This stops the local apic timer. This was debugged right after the dyntick merge on i386 and despite the patch title it fixes only the 32 bit path. x86_64 is still missing this fix. It seems that mainline is not really affected by this issue, as the PIT is running and keeps jiffies incrementing, but that's just waiting for trouble. -mm suffers from this problem due to the x86_64 high resolution timer patches. This is a quick and dirty port of the i386 code to x86_64. I spent quite a time with Rafael to debug the -mm / hrt wreckage until someone pointed us to this. I really had forgotten that we debugged this half a year ago already. Sigh, is it just me or is there something yelling arch/x86 into my ear? Signed-off-by: Thomas Gleixner Tested-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 34 ++++++++++++++++++++++++++++++++++ include/asm-x86_64/apic.h | 1 + 2 files changed, 35 insertions(+) diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index af838f6b0b7f..32054bf5ba40 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -546,6 +546,37 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi; + u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} + static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -617,6 +648,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) /* Family 10 doesn't support C states in MWAIT so don't use it */ if (c->x86 == 0x10 && !force_mwait) clear_bit(X86_FEATURE_MWAIT, &c->x86_capability); + + if (amd_apic_timer_broken()) + disable_apic_timer = 1; } static void __cpuinit detect_ht(struct cpuinfo_x86 *c) diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h index 85125ef3c414..e4580203dde2 100644 --- a/include/asm-x86_64/apic.h +++ b/include/asm-x86_64/apic.h @@ -20,6 +20,7 @@ extern int apic_verbosity; extern int apic_runs_main_timer; extern int ioapic_force; extern int apic_mapped; +extern int disable_apic_timer; /* * Define the default level of output to be very little -- cgit v1.2.3-58-ga151 From df912ea4ae7233d1504fbd861ee127bd7ee5781d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 25 Sep 2007 11:50:00 -0700 Subject: xen: execve's error paths don't pin the mm before unpinning execve's error paths don't activate (and therefore pin) the mm before calling exit_mmap to free it up, so don't try to unpin unless it is actually pinned. This prevents a BUG_ON from triggering. Signed-off-by: Jeremy Fitzhardinge Cc: Christian Ostheimer Signed-off-by: Linus Torvalds --- arch/i386/xen/mmu.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/i386/xen/mmu.c b/arch/i386/xen/mmu.c index 4ae038aa6c24..874db0cd1d2a 100644 --- a/arch/i386/xen/mmu.c +++ b/arch/i386/xen/mmu.c @@ -559,6 +559,9 @@ void xen_exit_mmap(struct mm_struct *mm) put_cpu(); spin_lock(&mm->page_table_lock); - xen_pgd_unpin(mm->pgd); + + /* pgd may not be pinned in the error exit path of execve */ + if (PagePinned(virt_to_page(mm->pgd))) + xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); } -- cgit v1.2.3-58-ga151 From 2efa33f81ef56e7700c09a3d8a881c96692149e5 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 26 Sep 2007 14:11:43 -0700 Subject: [x86 setup] Handle case of improperly terminated E820 chain At least one system (a Geode system with a Digital Logic BIOS) has been found which suddenly stops reporting the SMAP signature when reading the E820 memory chain. We can't know what, exactly, broke in the BIOS, so if we detect this situation, declare the E820 data unusable and fall back to E801. Also, revert to original behavior of always probing all memory methods; that way all the memory information is available to the kernel. Signed-off-by: H. Peter Anvin Cc: Jordan Crouse Cc: Joerg Pommnitz --- arch/i386/boot/memory.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/arch/i386/boot/memory.c b/arch/i386/boot/memory.c index 1a2e62db8bed..bccaa1cf6645 100644 --- a/arch/i386/boot/memory.c +++ b/arch/i386/boot/memory.c @@ -20,6 +20,7 @@ static int detect_memory_e820(void) { + int count = 0; u32 next = 0; u32 size, id; u8 err; @@ -33,14 +34,24 @@ static int detect_memory_e820(void) "=m" (*desc) : "D" (desc), "a" (0xe820)); - if (err || id != SMAP) + /* Some BIOSes stop returning SMAP in the middle of + the search loop. We don't know exactly how the BIOS + screwed up the map at that point, we might have a + partial map, the full map, or complete garbage, so + just return failure. */ + if (id != SMAP) { + count = 0; break; + } - boot_params.e820_entries++; + if (err) + break; + + count++; desc++; - } while (next && boot_params.e820_entries < E820MAX); + } while (next && count < E820MAX); - return boot_params.e820_entries; + return boot_params.e820_entries = count; } static int detect_memory_e801(void) @@ -89,11 +100,16 @@ static int detect_memory_88(void) int detect_memory(void) { + int err = -1; + if (detect_memory_e820() > 0) - return 0; + err = 0; if (!detect_memory_e801()) - return 0; + err = 0; + + if (!detect_memory_88()) + err = 0; - return detect_memory_88(); + return err; } -- cgit v1.2.3-58-ga151 From f7f847b01571e86044dc77e03d92f43699652f8d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Sep 2007 15:21:33 -0700 Subject: Revert "x86-64: Disable local APIC timer use on AMD systems with C1E" This reverts commit e66485d747505e9d960b864fc6c37f8b2afafaf0, since Rafael Wysocki noticed that the change only works for his in -mm, not in mainline (and that both "noapictimer" _and_ "apicmaintimer" are broken on his hardware, but that's apparently not a regression, just a symptom of the same issue that causes the automatic apic timer disable to not work). It turns out that it really doesn't work correctly on x86-64, since x86-64 doesn't use the generic clock events for timers yet. Thanks to Rafal for testing, and here's the ugly details on x86-64 as per Thomas: "I just looked into the code and the logic vs. noapictimer on SMP is completely broken. On i386 the noapictimer option not only disables the local APIC timer, it also registers the CPUs for broadcasting via IPI on SMP systems. The x86-64 code uses the broadcast only when the local apic timer is active, i.e. "noapictimer" is not on the command line. This defeats the whole purpose of "noapictimer". It should be there to make boxen work, where the local APIC timer actually has a hardware problem, e.g. the nx6325. The current implementation of x86_64 only fixes the ACPI c-states related problem where the APIC timer stops in C3(2), nothing else. On nx6325 and other AMD X2 equipped systems which have the C1E enabled we run into the following: PIT keeps jiffies (and the system) running, but the local APIC timer interrupts can get out of sync due to this C1E effect. I don't think this is a critical problem, but it is wrong nevertheless. I think it's safe to revert the C1E patch and postpone the fix to the clock events conversion." On further reflection, Thomas noted: "It's even worse than I thought on the first check: "noapictimer" on the command line of an SMP box prevents _ONLY_ the boot CPU apic timer from being used. But the secondary CPU is still unconditionally setting up the APIC timer and uses the non calibrated variable calibration_result, which is of course 0, to setup the APIC timer. Wreckage guaranteed." so we'll just have to wait for the x86 merge to hopefully fix this up for x86-64. Tested-and-requested-by: Rafael J. Wysocki Acked-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/setup.c | 34 ---------------------------------- include/asm-x86_64/apic.h | 1 - 2 files changed, 35 deletions(-) diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 32054bf5ba40..af838f6b0b7f 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -546,37 +546,6 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c) #endif } -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi; - u32 eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -648,9 +617,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) /* Family 10 doesn't support C states in MWAIT so don't use it */ if (c->x86 == 0x10 && !force_mwait) clear_bit(X86_FEATURE_MWAIT, &c->x86_capability); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; } static void __cpuinit detect_ht(struct cpuinfo_x86 *c) diff --git a/include/asm-x86_64/apic.h b/include/asm-x86_64/apic.h index e4580203dde2..85125ef3c414 100644 --- a/include/asm-x86_64/apic.h +++ b/include/asm-x86_64/apic.h @@ -20,7 +20,6 @@ extern int apic_verbosity; extern int apic_runs_main_timer; extern int ioapic_force; extern int apic_mapped; -extern int disable_apic_timer; /* * Define the default level of output to be very little -- cgit v1.2.3-58-ga151 From ff0ce6845bc18292e80ea40d11c3d3a539a3fc5e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Sep 2007 15:52:17 -0700 Subject: Revert "[PATCH] x86-64: fix x86_64-mm-sched-clock-share" This reverts commit 184c44d2049c4db7ef6ec65794546954da2c6a0e. As noted by Dave Jones: "Linus, please revert the above cset. It doesn't seem to be necessary (it was added to fix a miscompile in 'make allnoconfig' which doesn't seem to be repeatable with it reverted) and actively breaks the ARM SA1100 framebuffer driver." Requested-by: Dave Jones Cc: Russell King Cc: Andrew Morton Cc: Andi Kleen Signed-off-by: Linus Torvalds --- include/linux/cpufreq.h | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 963051a967d6..3ec6e7ff5fbd 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -32,15 +32,7 @@ * CPUFREQ NOTIFIER INTERFACE * *********************************************************************/ -#ifdef CONFIG_CPU_FREQ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list); -#else -static inline int cpufreq_register_notifier(struct notifier_block *nb, - unsigned int list) -{ - return 0; -} -#endif int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list); #define CPUFREQ_TRANSITION_NOTIFIER (0) @@ -268,22 +260,17 @@ struct freq_attr { int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); +/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ +unsigned int cpufreq_get(unsigned int cpu); -/* - * query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it - */ +/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ #ifdef CONFIG_CPU_FREQ unsigned int cpufreq_quick_get(unsigned int cpu); -unsigned int cpufreq_get(unsigned int cpu); #else static inline unsigned int cpufreq_quick_get(unsigned int cpu) { return 0; } -static inline unsigned int cpufreq_get(unsigned int cpu) -{ - return 0; -} #endif -- cgit v1.2.3-58-ga151 From 9c908f97d0f9aee32fa6d4b0a44c4c5d0ccab2b0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 27 Sep 2007 13:09:28 -0700 Subject: [SPARC]: Fix EBUS use of uninitialized variable. If of_get_property() fails, it returns NULL and the 'len' parameter is undefined. So we need to explicitly set len to zero in such cases. Noticed by Al Viro. Signed-off-by: David S. Miller --- arch/sparc/kernel/ebus.c | 2 ++ arch/sparc64/kernel/ebus.c | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c index e2d02fd13f35..d850785b2080 100644 --- a/arch/sparc/kernel/ebus.c +++ b/arch/sparc/kernel/ebus.c @@ -156,6 +156,8 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d dev->prom_node = dp; regs = of_get_property(dp, "reg", &len); + if (!regs) + len = 0; if (len % sizeof(struct linux_prom_registers)) { prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", dev->prom_node->name, len, diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c index bc9ae36f7a43..04ab81cb4f48 100644 --- a/arch/sparc64/kernel/ebus.c +++ b/arch/sparc64/kernel/ebus.c @@ -375,7 +375,10 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de dev->num_addrs = 0; dev->num_irqs = 0; } else { - (void) of_get_property(dp, "reg", &len); + const int *regs = of_get_property(dp, "reg", &len); + + if (!regs) + len = 0; dev->num_addrs = len / sizeof(struct linux_prom_registers); for (i = 0; i < dev->num_addrs; i++) -- cgit v1.2.3-58-ga151 From e79ad711a0108475c1b3a03815527e7237020b08 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 27 Sep 2007 13:52:00 -0700 Subject: [NET]: Zero length write() on socket should not simply return 0. This fixes kernel bugzilla #5731 It should generate an empty packet for datagram protocols when the socket is connected, for one. The check is doubly-wrong because all that a write() can be is a sendmsg() call with a NULL msg_control and a single entry iovec. No special semantics should be assigned to it, therefore the zero length check should be removed entirely. This matches the behavior of BSD and several other systems. Alan Cox notes that SuSv3 says the behavior of a zero length write on non-files is "unspecified", but that's kind of useless since BSD has defined this behavior for a quarter century and BSD is essentially what application folks code to. Based upon a patch from Stephen Hemminger. Signed-off-by: David S. Miller --- net/socket.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/socket.c b/net/socket.c index 7d44453dfae1..b09eb9036a17 100644 --- a/net/socket.c +++ b/net/socket.c @@ -777,9 +777,6 @@ static ssize_t sock_aio_write(struct kiocb *iocb, const struct iovec *iov, if (pos != 0) return -ESPIPE; - if (iocb->ki_left == 0) /* Match SYS5 behaviour */ - return 0; - x = alloc_sock_iocb(iocb, &siocb); if (!x) return -ENOMEM; -- cgit v1.2.3-58-ga151 From 6e351064b16914e4843248355288b777fa559947 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 26 Sep 2007 13:01:37 +0100 Subject: [MIPS] IP32: Fix initialization of UART base addresses. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index ba3697ee7ff6..7309e48d163d 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -41,8 +41,8 @@ static struct platform_device uart8250_device = { static int __init uart8250_init(void) { - uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1; - uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1; + uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1; + uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1; return platform_device_register(&uart8250_device); } -- cgit v1.2.3-58-ga151 From 7d809ba3f98b8aa8f9ba0dcdf6349958a0b77b7b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 11 Sep 2007 08:50:40 +0100 Subject: [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0. The __pa() for those did assume that all symbols have XKPHYS values and the math fails for any other address range. Signed-off-by: Ralf Baechle --- include/asm-mips/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index b92dd8c760da..e3301e54d559 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -142,7 +142,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; /* * __pa()/__va() should be used only during mem init. */ -#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) +#ifdef CONFIG_64BIT #define __pa(x) \ ({ \ unsigned long __x = (unsigned long)(x); \ -- cgit v1.2.3-58-ga151 From e4a7b1d1d90d202a030688ab5b177c3c0f15ee3e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 28 Sep 2007 11:46:28 +1000 Subject: i915: make vbl interrupts work properly on i965g/gm hw. This code is ported from the DRM git tree and allows the vblank interrupts to function on the i965 hw. It also requires a change in Mesa's 965 driver to actually use them. [ Without this patch, my 965GM drops vblank interrupts - Jesse ] Signed-off-by: Dave Airlie Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/char/drm/i915_drv.h | 6 ++++++ drivers/char/drm/i915_irq.c | 12 ++++++++++++ 2 files changed, 18 insertions(+) diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 737088bd0780..28b98733beb8 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -210,6 +210,12 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define I915REG_INT_MASK_R 0x020a8 #define I915REG_INT_ENABLE_R 0x020a0 +#define I915REG_PIPEASTAT 0x70024 +#define I915REG_PIPEBSTAT 0x71024 + +#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define I915_VBLANK_CLEAR (1UL<<1) + #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 #define SR01 1 diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c index 4b4b2ce89863..bb8e9e9c8201 100644 --- a/drivers/char/drm/i915_irq.c +++ b/drivers/char/drm/i915_irq.c @@ -214,6 +214,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u16 temp; + u32 pipea_stats, pipeb_stats; + + pipea_stats = I915_READ(I915REG_PIPEASTAT); + pipeb_stats = I915_READ(I915REG_PIPEBSTAT); temp = I915_READ16(I915REG_INT_IDENTITY_R); @@ -225,6 +229,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) return IRQ_NONE; I915_WRITE16(I915REG_INT_IDENTITY_R, temp); + (void) I915_READ16(I915REG_INT_IDENTITY_R); + DRM_READMEMORYBARRIER(); dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); @@ -252,6 +258,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (dev_priv->swaps_pending > 0) drm_locked_tasklet(dev, i915_vblank_tasklet); + I915_WRITE(I915REG_PIPEASTAT, + pipea_stats|I915_VBLANK_INTERRUPT_ENABLE| + I915_VBLANK_CLEAR); + I915_WRITE(I915REG_PIPEBSTAT, + pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE| + I915_VBLANK_CLEAR); } return IRQ_HANDLED; -- cgit v1.2.3-58-ga151 From 3b12e0141f7a97c3b84731b5f935ed738bb6f960 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 26 Sep 2007 17:58:47 -0700 Subject: sky2: sky2 FE+ receive status workaround The Yukon FE+ chip appears to have a hardware glitch that causes bogus receive status values to be posted. The data in the packet is good, but the status value is random garbage. As a temporary workaround until the problem is better understood, implement the workaround the vendor driver used of ignoring the status value on this chip. Since this means trusting dodgy hardware values; add additional checking of the receive packet length. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 0792031a5cf9..a3de0b6127eb 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -2148,6 +2148,18 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (length < ETH_ZLEN || length > sky2->rx_data_size) + goto len_error; + + /* This chip has hardware problems that generates bogus status. + * So do only marginal checking and expect higher level protocols + * to handle crap frames. + */ + if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && + sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 && + length != count) + goto okay; + if (status & GMR_FS_ANY_ERR) goto error; @@ -2156,8 +2168,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, /* if length reported by DMA does not match PHY, packet was truncated */ if (length != count) - goto len_mismatch; + goto len_error; +okay: if (length < copybreak) skb = receive_copy(sky2, re, length); else @@ -2167,13 +2180,13 @@ resubmit: return skb; -len_mismatch: +len_error: /* Truncation of overlength packets causes PHY length to not match MAC length */ ++sky2->net_stats.rx_length_errors; if (netif_msg_rx_err(sky2) && net_ratelimit()) - pr_info(PFX "%s: rx length mismatch: length %d status %#x\n", - dev->name, length, status); + pr_info(PFX "%s: rx length error: status %#x length %d\n", + dev->name, status, length); goto resubmit; error: @@ -3934,13 +3947,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); - /* This chip has hardware problems that generates - * bogus PHY receive status so by default shut up the message. - */ - if (hw->chip_id == CHIP_ID_YUKON_FE_P && - hw->chip_rev == CHIP_REV_YU_FE2_A0) - sky2->msg_enable &= ~NETIF_MSG_RX_ERR; - /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->flow_mode = FC_BOTH; -- cgit v1.2.3-58-ga151 From d6c9bc1ed4301cbc3df4565ff5348b64bf2a767c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 27 Sep 2007 12:32:44 -0700 Subject: sky2: FE+ vlan workaround The FE+ workaround means the driver can no longer trust the status register to indicate VLAN tagged frames. The fix for this is to just disable VLAN acceleration for that chip version. Tested and works fine. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index a3de0b6127eb..3bfc9d3e3c6e 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -3970,8 +3970,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->features |= NETIF_F_HIGHDMA; #ifdef SKY2_VLAN_TAG_USED - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->vlan_rx_register = sky2_vlan_rx_register; + /* The workaround for FE+ status conflicts with VLAN tag detection. */ + if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && + sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = sky2_vlan_rx_register; + } #endif /* read the mac address */ -- cgit v1.2.3-58-ga151 From 88f5f0cad396be594d6d55cb2d0cd69e8df9ab16 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 27 Sep 2007 12:38:12 -0700 Subject: sky2: fix transmit state on resume This should fix http://bugzilla.kernel.org/show_bug.cgi?id=8667 After resume, driver has reset the chip so the current state of transmit checksum offload state machine and DMA state machine will be undefined. The fix is to set the state so that first Tx will set MSS and offset values. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3bfc9d3e3c6e..162489b9f599 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -910,6 +910,20 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) return le; } +static void tx_init(struct sky2_port *sky2) +{ + struct sky2_tx_le *le; + + sky2->tx_prod = sky2->tx_cons = 0; + sky2->tx_tcpsum = 0; + sky2->tx_last_mss = 0; + + le = get_tx_le(sky2); + le->addr = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = 0; +} + static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, struct sky2_tx_le *le) { @@ -1320,7 +1334,8 @@ static int sky2_up(struct net_device *dev) GFP_KERNEL); if (!sky2->tx_ring) goto err_out; - sky2->tx_prod = sky2->tx_cons = 0; + + tx_init(sky2); sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, &sky2->rx_le_map); -- cgit v1.2.3-58-ga151 From f4ec7f98714c2c0b7afa422c0cba6fb5c875c2c2 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 30 Aug 2007 11:23:58 -0700 Subject: e1000: Add device IDs of blade version of the 82571 quad port This blade-specific board form factor is identical to the 82571EB board. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 1 + drivers/net/e1000/e1000_hw.c | 1 + drivers/net/e1000/e1000_hw.h | 1 + drivers/net/e1000/e1000_main.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 4c3785c9d4b8..9ecc3adcf6c1 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1726,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol case E1000_DEV_ID_82571EB_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: + case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index ba120f7fb0be..8604adbe351c 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -387,6 +387,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_SERDES_DUAL: case E1000_DEV_ID_82571EB_SERDES_QUAD: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: hw->mac_type = e1000_82571; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index fe8714655c90..07f0ea73676e 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -475,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 +#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5 #define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5 #define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC #define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4a225950fb43..e7c8951f47fa 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -108,6 +108,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x10BC), INTEL_E1000_ETHERNET_DEVICE(0x10C4), INTEL_E1000_ETHERNET_DEVICE(0x10C5), + INTEL_E1000_ETHERNET_DEVICE(0x10D5), INTEL_E1000_ETHERNET_DEVICE(0x10D9), INTEL_E1000_ETHERNET_DEVICE(0x10DA), /* required last entry */ @@ -1101,6 +1102,7 @@ e1000_probe(struct pci_dev *pdev, case E1000_DEV_ID_82571EB_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: + case E1000_DEV_ID_82571PT_QUAD_COPPER: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; -- cgit v1.2.3-58-ga151 From 83af919e0f239e87bc644a2c932b9cebf5771380 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 24 Sep 2007 19:13:46 +0200 Subject: [POWERPC] Fix copy'n'paste typo in commproc.c The powerpc version of commproc.c exports cpm_dpram_addr twice and cpm_dpram_phys not at all due to a typo. This patch fixes this problem. CC arch/powerpc/sysdev/commproc.o arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kcrctab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kcrctab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__kstrtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__kstrtab_cpm_dpram_addr' was here arch/powerpc/sysdev/commproc.c:398: error: redefinition of '__ksymtab_cpm_dpram_addr' arch/powerpc/sysdev/commproc.c:392: error: previous definition of '__ksymtab_cpm_dpram_addr' was here make[1]: *** [arch/powerpc/sysdev/commproc.o] Error 1 make: *** [arch/powerpc/sysdev] Error 2 Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/commproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c index 4f67b89ba1d0..dd5417aec1b4 100644 --- a/arch/powerpc/sysdev/commproc.c +++ b/arch/powerpc/sysdev/commproc.c @@ -395,4 +395,4 @@ uint cpm_dpram_phys(u8* addr) { return (dpram_pbase + (uint)(addr - dpram_vbase)); } -EXPORT_SYMBOL(cpm_dpram_addr); +EXPORT_SYMBOL(cpm_dpram_phys); -- cgit v1.2.3-58-ga151 From bc63818931ea55c54d6e59b7d38bff8f295dc8c1 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 24 Sep 2007 19:14:57 +0200 Subject: [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem cpm_dpram_addr returns physical memory of the DP RAM instead of iomapped virtual memory. As there usually is a 1:1 MMU map of the IMMR area, this is often not noticed. However, cpm_dpram_phys assumes this iomapped virtual memory and returns garbage on the 1:1 mapped memory causing CPM1 uart console to fail. This patch fixes the problem (copied from the powerpc tree). Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- arch/ppc/8xx_io/commproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 7088428e1fe2..9da880be4dc0 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -459,7 +459,7 @@ EXPORT_SYMBOL(cpm_dpdump); void *cpm_dpram_addr(unsigned long offset) { - return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset; + return (void *)(dpram_vbase + offset); } EXPORT_SYMBOL(cpm_dpram_addr); -- cgit v1.2.3-58-ga151 From d214602804a85e5da68b745ae69d9beaa5bedc93 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 24 Sep 2007 19:15:43 +0200 Subject: [POWERPC] Fix cpm_uart driver for cpm1 machines in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart_cpm1.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index a99e45e2b6d8..2a6477834c3e 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -37,6 +37,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) up->smc_tfcr = SMC_EB; } -#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0]) +#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) #endif -- cgit v1.2.3-58-ga151 From 39db0fd9db6caea8887f61fee4a0e53c6f8fec5e Mon Sep 17 00:00:00 2001 From: "jacmet@sunsite.dk" Date: Fri, 28 Sep 2007 16:21:14 +0200 Subject: [POWERPC] Fix mpc834x USB-MPH configuration. mpc834x USB-MPH configuration got broken by commit 6f442560021aecf08658e26ed9a37e6928ef0fa1. The selection bits in SICRL should be cleared rather than set to configure the USB MUXes for the MPH. Signed-off-by: Peter Korsgaard Signed-off-by: Kumar Gala --- arch/powerpc/platforms/83xx/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index e7fdf013cd39..eafe7605cdac 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -76,14 +76,14 @@ int mpc834x_usb_cfg(void) if (port0_is_dr) printk(KERN_WARNING "834x USB port0 can't be used by both DR and MPH!\n"); - sicrl |= MPC834X_SICRL_USB0; + sicrl &= ~MPC834X_SICRL_USB0; } prop = of_get_property(np, "port1", NULL); if (prop) { if (port1_is_dr) printk(KERN_WARNING "834x USB port1 can't be used by both DR and MPH!\n"); - sicrl |= MPC834X_SICRL_USB1; + sicrl &= ~MPC834X_SICRL_USB1; } of_node_put(np); } -- cgit v1.2.3-58-ga151 From f93c7c5aab8d5efaf99c88c8452d9303baabc89b Mon Sep 17 00:00:00 2001 From: "jacmet@sunsite.dk" Date: Fri, 28 Sep 2007 16:21:15 +0200 Subject: [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode. Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make much sense for the mini-AB connector on the ITX board. Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet properly support it. Signed-off-by: Peter Korsgaard Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8349emitx.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 502f47c01797..44c065a6b5e7 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -99,6 +99,7 @@ #size-cells = <0>; interrupt-parent = < &ipic >; interrupts = <26 8>; + dr_mode = "peripheral"; phy_type = "ulpi"; }; -- cgit v1.2.3-58-ga151 From 4ee5b10abeb2b5581be10d3022694cd19084e9b0 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 27 Sep 2007 17:17:12 -0700 Subject: [x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820 The e820 probe code was checking %edx, not %eax, for the SMAP signature on return. This worked on *almost* all systems, since %edx still contained SMAP from the call on entry, but on a handful of systems it failed -- plus, we would have missed real mismatches. The error output is "=d" to make sure gcc knows %edx is clobbered here. Signed-off-by: H. Peter Anvin --- arch/i386/boot/memory.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/i386/boot/memory.c b/arch/i386/boot/memory.c index bccaa1cf6645..378353956b5d 100644 --- a/arch/i386/boot/memory.c +++ b/arch/i386/boot/memory.c @@ -28,11 +28,14 @@ static int detect_memory_e820(void) do { size = sizeof(struct e820entry); - id = SMAP; + + /* Important: %edx is clobbered by some BIOSes, + so it must be either used for the error output + or explicitly marked clobbered. */ asm("int $0x15; setc %0" - : "=am" (err), "+b" (next), "+d" (id), "+c" (size), + : "=d" (err), "+b" (next), "=a" (id), "+c" (size), "=m" (*desc) - : "D" (desc), "a" (0xe820)); + : "D" (desc), "d" (SMAP), "a" (0xe820)); /* Some BIOSes stop returning SMAP in the middle of the search loop. We don't know exactly how the BIOS -- cgit v1.2.3-58-ga151 From d8998737bd56e65d5e7326b515769c20dc01cb63 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 26 Sep 2007 13:01:37 +0100 Subject: [MIPS] IP32: Fix initialization of UART base addresses. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-platform.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index ba3697ee7ff6..7309e48d163d 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -41,8 +41,8 @@ static struct platform_device uart8250_device = { static int __init uart8250_init(void) { - uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1; - uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1; + uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1; + uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1; return platform_device_register(&uart8250_device); } -- cgit v1.2.3-58-ga151 From 9ae6399f0178c49a6e9cb7562ecc2f7d10c9f195 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 11 Sep 2007 08:50:40 +0100 Subject: [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0. The __pa() for those did assume that all symbols have XKPHYS values and the math fails for any other address range. Signed-off-by: Ralf Baechle --- include/asm-mips/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index b92dd8c760da..e3301e54d559 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -142,7 +142,7 @@ typedef struct { unsigned long pgprot; } pgprot_t; /* * __pa()/__va() should be used only during mem init. */ -#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64) +#ifdef CONFIG_64BIT #define __pa(x) \ ({ \ unsigned long __x = (unsigned long)(x); \ -- cgit v1.2.3-58-ga151 From 422efb17eee0471baf4e1876ac9e8ba4c9e7a37a Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 28 Sep 2007 13:15:20 -0400 Subject: [MIPS] Fix fallocate on o32 binary compat ABI MIPS was mistakenly forgetting to use the fallocate compat wrapper, which I noticed while cleaning up all the duplicate fallocate wrappers. Signed-off-by: Kyle McMartin Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index b3ed731a24c6..dd68afce7da5 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -525,5 +525,5 @@ sys_call_table: PTR compat_sys_signalfd PTR compat_sys_timerfd PTR sys_eventfd - PTR sys_fallocate /* 4320 */ + PTR sys32_fallocate /* 4320 */ .size sys_call_table,.-sys_call_table -- cgit v1.2.3-58-ga151 From f8ab18d2d987a59ccbf0495032b2aef05b730037 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 28 Sep 2007 15:18:35 -0700 Subject: [TCP]: Fix MD5 signature handling on big-endian. Based upon a report and initial patch by Peter Lieven. tcp4_md5sig_key and tcp6_md5sig_key need to start with the exact same members as tcp_md5sig_key. Because they are both cast to that type by tcp_v{4,6}_md5_do_lookup(). Unfortunately tcp{4,6}_md5sig_key use a u16 for the key length instead of a u8, which is what tcp_md5sig_key uses. This just so happens to work by accident on little-endian, but on big-endian it doesn't. Instead of casting, just place tcp_md5sig_key as the first member of the address-family specific structures, adjust the access sites, and kill off the ugly casts. Signed-off-by: David S. Miller --- include/net/tcp.h | 6 ++---- net/ipv4/tcp_ipv4.c | 19 +++++++++---------- net/ipv6/tcp_ipv6.c | 18 +++++++++--------- 3 files changed, 20 insertions(+), 23 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 185c7ecce4cc..54053de0bdd7 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1059,14 +1059,12 @@ struct tcp_md5sig_key { }; struct tcp4_md5sig_key { - u8 *key; - u16 keylen; + struct tcp_md5sig_key base; __be32 addr; }; struct tcp6_md5sig_key { - u8 *key; - u16 keylen; + struct tcp_md5sig_key base; #if 0 u32 scope_id; /* XXX */ #endif diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 9c94627c8c7e..e089a978e128 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -833,8 +833,7 @@ static struct tcp_md5sig_key * return NULL; for (i = 0; i < tp->md5sig_info->entries4; i++) { if (tp->md5sig_info->keys4[i].addr == addr) - return (struct tcp_md5sig_key *) - &tp->md5sig_info->keys4[i]; + return &tp->md5sig_info->keys4[i].base; } return NULL; } @@ -865,9 +864,9 @@ int tcp_v4_md5_do_add(struct sock *sk, __be32 addr, key = (struct tcp4_md5sig_key *)tcp_v4_md5_do_lookup(sk, addr); if (key) { /* Pre-existing entry - just update that one. */ - kfree(key->key); - key->key = newkey; - key->keylen = newkeylen; + kfree(key->base.key); + key->base.key = newkey; + key->base.keylen = newkeylen; } else { struct tcp_md5sig_info *md5sig; @@ -906,9 +905,9 @@ int tcp_v4_md5_do_add(struct sock *sk, __be32 addr, md5sig->alloced4++; } md5sig->entries4++; - md5sig->keys4[md5sig->entries4 - 1].addr = addr; - md5sig->keys4[md5sig->entries4 - 1].key = newkey; - md5sig->keys4[md5sig->entries4 - 1].keylen = newkeylen; + md5sig->keys4[md5sig->entries4 - 1].addr = addr; + md5sig->keys4[md5sig->entries4 - 1].base.key = newkey; + md5sig->keys4[md5sig->entries4 - 1].base.keylen = newkeylen; } return 0; } @@ -930,7 +929,7 @@ int tcp_v4_md5_do_del(struct sock *sk, __be32 addr) for (i = 0; i < tp->md5sig_info->entries4; i++) { if (tp->md5sig_info->keys4[i].addr == addr) { /* Free the key */ - kfree(tp->md5sig_info->keys4[i].key); + kfree(tp->md5sig_info->keys4[i].base.key); tp->md5sig_info->entries4--; if (tp->md5sig_info->entries4 == 0) { @@ -964,7 +963,7 @@ static void tcp_v4_clear_md5_list(struct sock *sk) if (tp->md5sig_info->entries4) { int i; for (i = 0; i < tp->md5sig_info->entries4; i++) - kfree(tp->md5sig_info->keys4[i].key); + kfree(tp->md5sig_info->keys4[i].base.key); tp->md5sig_info->entries4 = 0; tcp_free_md5sig_pool(); } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 0f7defb482e9..3e06799b37a6 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -539,7 +539,7 @@ static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(struct sock *sk, for (i = 0; i < tp->md5sig_info->entries6; i++) { if (ipv6_addr_cmp(&tp->md5sig_info->keys6[i].addr, addr) == 0) - return (struct tcp_md5sig_key *)&tp->md5sig_info->keys6[i]; + return &tp->md5sig_info->keys6[i].base; } return NULL; } @@ -567,9 +567,9 @@ static int tcp_v6_md5_do_add(struct sock *sk, struct in6_addr *peer, key = (struct tcp6_md5sig_key*) tcp_v6_md5_do_lookup(sk, peer); if (key) { /* modify existing entry - just update that one */ - kfree(key->key); - key->key = newkey; - key->keylen = newkeylen; + kfree(key->base.key); + key->base.key = newkey; + key->base.keylen = newkeylen; } else { /* reallocate new list if current one is full. */ if (!tp->md5sig_info) { @@ -603,8 +603,8 @@ static int tcp_v6_md5_do_add(struct sock *sk, struct in6_addr *peer, ipv6_addr_copy(&tp->md5sig_info->keys6[tp->md5sig_info->entries6].addr, peer); - tp->md5sig_info->keys6[tp->md5sig_info->entries6].key = newkey; - tp->md5sig_info->keys6[tp->md5sig_info->entries6].keylen = newkeylen; + tp->md5sig_info->keys6[tp->md5sig_info->entries6].base.key = newkey; + tp->md5sig_info->keys6[tp->md5sig_info->entries6].base.keylen = newkeylen; tp->md5sig_info->entries6++; } @@ -626,7 +626,7 @@ static int tcp_v6_md5_do_del(struct sock *sk, struct in6_addr *peer) for (i = 0; i < tp->md5sig_info->entries6; i++) { if (ipv6_addr_cmp(&tp->md5sig_info->keys6[i].addr, peer) == 0) { /* Free the key */ - kfree(tp->md5sig_info->keys6[i].key); + kfree(tp->md5sig_info->keys6[i].base.key); tp->md5sig_info->entries6--; if (tp->md5sig_info->entries6 == 0) { @@ -657,7 +657,7 @@ static void tcp_v6_clear_md5_list (struct sock *sk) if (tp->md5sig_info->entries6) { for (i = 0; i < tp->md5sig_info->entries6; i++) - kfree(tp->md5sig_info->keys6[i].key); + kfree(tp->md5sig_info->keys6[i].base.key); tp->md5sig_info->entries6 = 0; tcp_free_md5sig_pool(); } @@ -668,7 +668,7 @@ static void tcp_v6_clear_md5_list (struct sock *sk) if (tp->md5sig_info->entries4) { for (i = 0; i < tp->md5sig_info->entries4; i++) - kfree(tp->md5sig_info->keys4[i].key); + kfree(tp->md5sig_info->keys4[i].base.key); tp->md5sig_info->entries4 = 0; tcp_free_md5sig_pool(); } -- cgit v1.2.3-58-ga151 From 54af3bb543c071769141387a42deaaab5074da55 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 28 Sep 2007 12:27:41 -0400 Subject: NFS: Fix an Oops in encode_lookup() It doesn't look as if the NFS file name limit is being initialised correctly in the struct nfs_server. Make sure that we limit whatever is being set in nfs_probe_fsinfo() and nfs_init_server(). Also ensure that readdirplus and nfs4_path_walk respect our file name limits. Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- fs/nfs/client.c | 29 +++++++++++++++++++---------- fs/nfs/dir.c | 2 ++ fs/nfs/getroot.c | 3 +++ 3 files changed, 24 insertions(+), 10 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index a49f9feff776..a204484072f3 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -588,16 +588,6 @@ static int nfs_init_server(struct nfs_server *server, const struct nfs_mount_dat server->namelen = data->namlen; /* Create a client RPC handle for the NFSv3 ACL management interface */ nfs_init_server_aclclient(server); - if (clp->cl_nfsversion == 3) { - if (server->namelen == 0 || server->namelen > NFS3_MAXNAMLEN) - server->namelen = NFS3_MAXNAMLEN; - if (!(data->flags & NFS_MOUNT_NORDIRPLUS)) - server->caps |= NFS_CAP_READDIRPLUS; - } else { - if (server->namelen == 0 || server->namelen > NFS2_MAXNAMLEN) - server->namelen = NFS2_MAXNAMLEN; - } - dprintk("<-- nfs_init_server() = 0 [new %p]\n", clp); return 0; @@ -794,6 +784,16 @@ struct nfs_server *nfs_create_server(const struct nfs_mount_data *data, error = nfs_probe_fsinfo(server, mntfh, &fattr); if (error < 0) goto error; + if (server->nfs_client->rpc_ops->version == 3) { + if (server->namelen == 0 || server->namelen > NFS3_MAXNAMLEN) + server->namelen = NFS3_MAXNAMLEN; + if (!(data->flags & NFS_MOUNT_NORDIRPLUS)) + server->caps |= NFS_CAP_READDIRPLUS; + } else { + if (server->namelen == 0 || server->namelen > NFS2_MAXNAMLEN) + server->namelen = NFS2_MAXNAMLEN; + } + if (!(fattr.valid & NFS_ATTR_FATTR)) { error = server->nfs_client->rpc_ops->getattr(server, mntfh, &fattr); if (error < 0) { @@ -984,6 +984,9 @@ struct nfs_server *nfs4_create_server(const struct nfs4_mount_data *data, if (error < 0) goto error; + if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN) + server->namelen = NFS4_MAXNAMLEN; + BUG_ON(!server->nfs_client); BUG_ON(!server->nfs_client->rpc_ops); BUG_ON(!server->nfs_client->rpc_ops->file_inode_ops); @@ -1056,6 +1059,9 @@ struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *data, if (error < 0) goto error; + if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN) + server->namelen = NFS4_MAXNAMLEN; + dprintk("Referral FSID: %llx:%llx\n", (unsigned long long) server->fsid.major, (unsigned long long) server->fsid.minor); @@ -1115,6 +1121,9 @@ struct nfs_server *nfs_clone_server(struct nfs_server *source, if (error < 0) goto out_free_server; + if (server->namelen == 0 || server->namelen > NFS4_MAXNAMLEN) + server->namelen = NFS4_MAXNAMLEN; + dprintk("Cloned FSID: %llx:%llx\n", (unsigned long long) server->fsid.major, (unsigned long long) server->fsid.minor); diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index ea97408e423e..e4a04d16b8b0 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1162,6 +1162,8 @@ static struct dentry *nfs_readdir_lookup(nfs_readdir_descriptor_t *desc) } if (!desc->plus || !(entry->fattr->valid & NFS_ATTR_FATTR)) return NULL; + if (name.len > NFS_SERVER(dir)->namelen) + return NULL; /* Note: caller is already holding the dir->i_mutex! */ dentry = d_alloc(parent, &name); if (dentry == NULL) diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c index d1cbf0a0fbb2..522e5ad4d8ad 100644 --- a/fs/nfs/getroot.c +++ b/fs/nfs/getroot.c @@ -175,6 +175,9 @@ next_component: path++; name.len = path - (const char *) name.name; + if (name.len > NFS4_MAXNAMLEN) + return -ENAMETOOLONG; + eat_dot_dir: while (*path == '/') path++; -- cgit v1.2.3-58-ga151 From b082dff349e0a9374d19765f17b3fdceb74fda56 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 27 Sep 2007 00:09:29 -0400 Subject: Input: xpad - fix dependancy on LEDS class Input: xpad - fix dependancy on LEDS class The driver can not be built-in when LEDS class is a module. Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/joystick/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index e2abe18e575d..7c662ee594a3 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -277,7 +277,7 @@ config JOYSTICK_XPAD_FF config JOYSTICK_XPAD_LEDS bool "LED Support for Xbox360 controller 'BigX' LED" - depends on LEDS_CLASS && JOYSTICK_XPAD + depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD) ---help--- This option enables support for the LED which surrounds the Big X on XBox 360 controller. -- cgit v1.2.3-58-ga151 From 1bef7dc00caa7bcbff4fdb55e599e2591461fafa Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sat, 29 Sep 2007 09:06:21 +1000 Subject: Fix bogus PCI quirk for e100 Linas reported me that some machines were crashing at boot in quirk_e100_interrupt. It appears that this quirk is doing an ioremap directly on a PCI BAR value, which isn't legal and will cause all sorts of bad things to happen on architectures where PCI BARs don't directly match processor bus addresses. This fixes it by using the proper PCI resources instead which is possible since the quirk has been moved by a previous commit to happen late enough for that. Signed-off-by: Benjamin Herrenschmidt Acked-by: Linas Vepstas Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7dcaa09b3c20..50f2dd9e1bb2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1444,7 +1444,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); static void __devinit quirk_e100_interrupt(struct pci_dev *dev) { u16 command; - u32 bar; u8 __iomem *csr; u8 cmd_hi; @@ -1476,12 +1475,12 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) * re-enable them when it's ready. */ pci_read_config_word(dev, PCI_COMMAND, &command); - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); - if (!(command & PCI_COMMAND_MEMORY) || !bar) + if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) return; - csr = ioremap(bar, 8); + /* Convert from PCI bus to resource space. */ + csr = ioremap(pci_resource_start(dev, 0), 8); if (!csr) { printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", pci_name(dev)); -- cgit v1.2.3-58-ga151 From 2bcff60f7ce88c09a2bc1302ff14510737bfcb7b Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Fri, 28 Sep 2007 06:30:43 -0700 Subject: mv643xx_eth: Check ETH_INT_CAUSE_STATE bit Commit 468d09f8946d40228c56de26fe4874b2f98067ed masked the "state" interrupt (bit 20 of the cause register). This results in Radstone's PPC7D repeatedly re-entering the interrupt routine, locking up the board. The following patch returns the required handling for this interrupt. Signed-off-by: Martyn Welch Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 2 +- drivers/net/mv643xx_eth.h | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 456d1e1c98bd..34288fe038c3 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -534,7 +534,7 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id) } /* PHY status changed */ - if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) { + if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) { struct ethtool_cmd cmd; if (mii_link_ok(&mp->mii)) { diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h index 82f8c0cbfb64..565b96696aca 100644 --- a/drivers/net/mv643xx_eth.h +++ b/drivers/net/mv643xx_eth.h @@ -64,7 +64,9 @@ #define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8) #define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR) #define ETH_INT_CAUSE_PHY 0x00010000 -#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY) +#define ETH_INT_CAUSE_STATE 0x00100000 +#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \ + ETH_INT_CAUSE_STATE) #define ETH_INT_MASK_ALL 0x00000000 #define ETH_INT_MASK_ALL_EXT 0x00000000 -- cgit v1.2.3-58-ga151 From 4827bbb06e4b59922c2b9bfb13ad1bf936bdebe5 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sat, 29 Sep 2007 15:28:48 +0200 Subject: i386: remove bogus comment about memory barrier The comment being removed by this patch is incorrect and misleading. In the following situation: 1. load ... 2. store 1 -> X 3. wmb 4. rmb 5. load a <- Y 6. store ... 4 will only ensure ordering of 1 with 5. 3 will only ensure ordering of 2 with 6. Further, a CPU with strictly in-order stores will still only provide that 2 and 6 are ordered (effectively, it is the same as a weakly ordered CPU with wmb after every store). In all cases, 5 may still be executed before 2 is visible to other CPUs! The additional piece of the puzzle that mb() provides is the store/load ordering, which fundamentally cannot be achieved with any combination of rmb()s and wmb()s. This can be an unexpected result if one expected any sort of global ordering guarantee to barriers (eg. that the barriers themselves are sequentially consistent with other types of barriers). However sfence or lfence barriers need only provide an ordering partial ordering of memory operations -- Consider that wmb may be implemented as nothing more than inserting a special barrier entry in the store queue, or, in the case of x86, it can be a noop as the store queue is in order. And an rmb may be implemented as a directive to prevent subsequent loads only so long as their are no previous outstanding loads (while there could be stores still in store queues). I can actually see the occasional load/store being reordered around lfence on my core2. That doesn't prove my above assertions, but it does show the comment is wrong (unless my program is -- can send it out by request). So: mb() and smp_mb() always have and always will require a full mfence or lock prefixed instruction on x86. And we should remove this comment. Signed-off-by: Nick Piggin Cc: Paul McKenney Cc: David Howells Cc: Andi Kleen Signed-off-by: Linus Torvalds --- include/asm-i386/system.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h index 609756c61676..d69ba937e092 100644 --- a/include/asm-i386/system.h +++ b/include/asm-i386/system.h @@ -214,11 +214,6 @@ static inline unsigned long get_limit(unsigned long segment) */ -/* - * Actually only lfence would be needed for mb() because all stores done - * by the kernel should be already ordered. But keep a full barrier for now. - */ - #define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2) #define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2) -- cgit v1.2.3-58-ga151 From a64314e62d89562b6fc77593648bec3acc35bf61 Mon Sep 17 00:00:00 2001 From: Jan Lübbe Date: Sat, 29 Sep 2007 18:47:51 +0200 Subject: fix console change race exposed by CFS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The new behaviour of CFS exposes a race which occurs if a switch is requested when vt_mode.mode is VT_PROCESS. The process with vc->vt_pid is signaled before vc->vt_newvt is set. This causes the switch to fail when triggered by the monitoing process because the target is still -1. [ If the signal sending fails, the subsequent "reset_vc(vc)" will then reset vt_newvt to -1, so this works for that case too. - Linus ] Signed-off-by: Jan Lübbe Signed-off-by: Linus Torvalds --- drivers/char/vt_ioctl.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index c6f6f4209739..045e6888d15b 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -1208,15 +1208,18 @@ void change_console(struct vc_data *new_vc) /* * Send the signal as privileged - kill_pid() will * tell us if the process has gone or something else - * is awry + * is awry. + * + * We need to set vt_newvt *before* sending the signal or we + * have a race. */ + vc->vt_newvt = new_vc->vc_num; if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) { /* * It worked. Mark the vt to switch to and * return. The process needs to send us a * VT_RELDISP ioctl to complete the switch. */ - vc->vt_newvt = new_vc->vc_num; return; } -- cgit v1.2.3-58-ga151 From cb50f548c0ee9b2aac39743fc4021a7188825a98 Mon Sep 17 00:00:00 2001 From: Ian Armstrong Date: Sat, 18 Aug 2007 15:58:51 -0300 Subject: V4L/DVB (6052): ivtv: fix udma yuv bug Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-fileops.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 0285c4a830eb..66ea3cbc369c 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -754,9 +754,11 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts) ivtv_yuv_close(itv); } if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_YUV) - itv->output_mode = OUT_NONE; + itv->output_mode = OUT_NONE; + else if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_UDMA_YUV) + itv->output_mode = OUT_NONE; else if (s->type == IVTV_DEC_STREAM_TYPE_MPG && itv->output_mode == OUT_MPG) - itv->output_mode = OUT_NONE; + itv->output_mode = OUT_NONE; itv->speed = 0; clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); -- cgit v1.2.3-58-ga151 From 46edfc54ee2cc60db0f10d982d6b9b7850733ff2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 30 Sep 2007 17:36:22 +0100 Subject: [ARM] Resolve PCI section warnings Fix the following (valid) section warnings: WARNING: vmlinux.o(.text+0xf7b5c): Section mismatch: reference to .init.text:pcibios_fixup_bus (between 'pci_scan_child_bus' and 'pci_scan_bridge') WARNING: vmlinux.o(.text+0xfc5f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_map_rom' and 'pci_unmap_rom') WARNING: vmlinux.o(.text+0xfc824): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_update_resource' and 'pci_claim_resource') WARNING: vmlinux.o(.text+0xfd6d8): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd730): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd788): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfd7e0): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_setup_cardbus' and 'find_free_bus_resource') WARNING: vmlinux.o(.text+0xfe024): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe0f4): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') WARNING: vmlinux.o(.text+0xfe17c): Section mismatch: reference to .init.text:pcibios_resource_to_bus (between 'pci_bus_assign_resources' and 'sys_pciconfig_read') Signed-off-by: Russell King --- arch/arm/kernel/bios32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 240c448ec31c..a2dd930d11ef 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -338,7 +338,7 @@ pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root) * pcibios_fixup_bus - Called after each bus is probed, * but before its children are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { struct pci_sys_data *root = bus->sysdata; struct pci_dev *dev; @@ -419,7 +419,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* * Convert from Linux-centric to bus-centric addresses for bridge devices. */ -void __devinit +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { -- cgit v1.2.3-58-ga151 From 8cc8c28a9acdceda0e60519167a052cc3408c5c3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 30 Sep 2007 17:00:34 -0700 Subject: [SPARC64]: Fix put_user() calls in binfmt_aout32.c argv and envp are pointers to u32's in userspace, so don't try to put_user() a NULL to them. Aparently gcc-4.2.x now warns about this, and since we use -Werror for arch/sparc64 code, this breaks the build. Signed-off-by: David S. Miller --- arch/sparc64/kernel/binfmt_aout32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c index f205fc7cbcd0..d208cc7804f2 100644 --- a/arch/sparc64/kernel/binfmt_aout32.c +++ b/arch/sparc64/kernel/binfmt_aout32.c @@ -177,7 +177,7 @@ static u32 __user *create_aout32_tables(char __user *p, struct linux_binprm *bpr get_user(c,p++); } while (c); } - put_user(NULL,argv); + put_user(0,argv); current->mm->arg_end = current->mm->env_start = (unsigned long) p; while (envc-->0) { char c; @@ -186,7 +186,7 @@ static u32 __user *create_aout32_tables(char __user *p, struct linux_binprm *bpr get_user(c,p++); } while (c); } - put_user(NULL,envp); + put_user(0,envp); current->mm->env_end = (unsigned long) p; return sp; } -- cgit v1.2.3-58-ga151 From f998351c755a0e87785f2616c4f91f1b3b19b149 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 30 Sep 2007 20:35:39 -0400 Subject: [PATCH] libertas: build problems when partially modular Fix missing symbols in libertas USB driver when it is modular and rest of libertas is built-in. Signed-off-by: Randy Dunlap Signed-off-by: John W. Linville --- drivers/net/wireless/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index ef35bc6c4a22..4eb6d9752881 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o obj-$(CONFIG_USB_ZD1201) += zd1201.o -obj-$(CONFIG_LIBERTAS_USB) += libertas/ +obj-$(CONFIG_LIBERTAS) += libertas/ rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o obj-$(CONFIG_RTL8187) += rtl8187.o -- cgit v1.2.3-58-ga151 From ca074a33928762c65e261dd94006c1b6a47e46fa Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 30 Sep 2007 00:45:08 +0100 Subject: [MIPS] Fix value of O_TRUNC A "cleanup" almost two years ago deleted the old definition from , so asm-generic/fcntl.h defaulted it to the the same value as FASYNC ... which happened to be the wrong thing. Signed-off-by: Ralf Baechle --- include/asm-mips/fcntl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-mips/fcntl.h b/include/asm-mips/fcntl.h index 00a50ec1c19f..2a52333a062d 100644 --- a/include/asm-mips/fcntl.h +++ b/include/asm-mips/fcntl.h @@ -13,6 +13,7 @@ #define O_SYNC 0x0010 #define O_NONBLOCK 0x0080 #define O_CREAT 0x0100 /* not fcntl */ +#define O_TRUNC 0x0200 /* not fcntl */ #define O_EXCL 0x0400 /* not fcntl */ #define O_NOCTTY 0x0800 /* not fcntl */ #define FASYNC 0x1000 /* fcntl, for BSD compatibility */ -- cgit v1.2.3-58-ga151 From 6f6b3940ed326eed58074d777ab92fda3a60a382 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 1 Oct 2007 13:24:04 +0100 Subject: [MIPS] vmlinux.lds.S: Handle note sections Store any note sections after the exception tables like the other architectures do. This is required for .note.gnu.build-id emitted from binutils 2.18 onwards if nothing else. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 60bbaecde187..087ab997487d 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -45,6 +45,8 @@ SECTIONS __dbe_table : { *(__dbe_table) } __stop___dbe_table = .; + NOTES + RODATA /* writeable */ -- cgit v1.2.3-58-ga151 From 8814842fbb6d8907cd23711cc4cbc3a6a191080f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 1 Oct 2007 01:20:09 -0700 Subject: Add /dev/oldmem to devices.txt documentation Signed-off-by: Dave Jones Cc: "H. Peter Anvin" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/devices.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 8de132a02ba9..6c46730c631a 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -94,6 +94,8 @@ Your cooperation is appreciated. 9 = /dev/urandom Faster, less secure random number gen. 10 = /dev/aio Asynchronous I/O notification interface 11 = /dev/kmsg Writes to this come out as printk's + 12 = /dev/oldmem Used by crashdump kernels to access + the memory of the kernel that crashed. 1 block RAM disk 0 = /dev/ram0 First RAM disk -- cgit v1.2.3-58-ga151 From 281e0e3b34acb76a157576d27abc85c09fcf78e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 1 Oct 2007 01:20:10 -0700 Subject: hugetlb: fix clear_user_highpage arguments The virtual address space argument of clear_user_highpage is supposed to be the virtual address where the page being cleared will eventually be mapped. This allows architectures with virtually indexed caches a few clever tricks. That sort of trick falls over in painful ways if the virtual address argument is wrong. Signed-off-by: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 84c795ee2d65..eab8c428cc93 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -42,7 +42,7 @@ static void clear_huge_page(struct page *page, unsigned long addr) might_sleep(); for (i = 0; i < (HPAGE_SIZE/PAGE_SIZE); i++) { cond_resched(); - clear_user_highpage(page + i, addr); + clear_user_highpage(page + i, addr + i * PAGE_SIZE); } } -- cgit v1.2.3-58-ga151 From 4047727e5ae33f9b8d2b7766d1994ea6e5ec2991 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Mon, 1 Oct 2007 01:20:10 -0700 Subject: Fix SMP poweroff hangs We need to disable all CPUs other than the boot CPU (usually 0) before attempting to power-off modern SMP machines. This fixes the hang-on-poweroff issue on my MythTV SMP box, and also on Thomas Gleixner's new toybox. Signed-off-by: Mark Lord Acked-by: Thomas Gleixner Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sys.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sys.c b/kernel/sys.c index 1b33b05d346b..8ae2e636eb1b 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -878,6 +879,7 @@ void kernel_power_off(void) kernel_shutdown_prepare(SYSTEM_POWER_OFF); if (pm_power_off_prepare) pm_power_off_prepare(); + disable_nonboot_cpus(); sysdev_shutdown(); printk(KERN_EMERG "Power down.\n"); machine_power_off(); -- cgit v1.2.3-58-ga151 From 8792f961ba8057d9f27987def3600253a3ba060f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Mon, 1 Oct 2007 01:20:12 -0700 Subject: VT ioctl race fix When calling the RELDISP VT ioctl, we are reading vt_newvt while the console workqueue could be messing with it (through change_console()). We fix this race by taking the console semaphore before reading vt_newvt. Signed-off-by: Samuel Ortiz Acked-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/vt_ioctl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 045e6888d15b..c799b7f7bbb3 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -770,6 +770,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * Switching-from response */ + acquire_console_sem(); if (vc->vt_newvt >= 0) { if (arg == 0) /* @@ -784,7 +785,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, * complete the switch. */ int newvt; - acquire_console_sem(); newvt = vc->vt_newvt; vc->vt_newvt = -1; i = vc_allocate(newvt); @@ -798,7 +798,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, * other console switches.. */ complete_change_console(vc_cons[newvt].d); - release_console_sem(); } } @@ -810,9 +809,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * If it's just an ACK, ignore it */ - if (arg != VT_ACKACQ) + if (arg != VT_ACKACQ) { + release_console_sem(); return -EINVAL; + } } + release_console_sem(); return 0; -- cgit v1.2.3-58-ga151 From 9f96cb1e8bca179a92afa40dfc3c49990f1cfc71 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 1 Oct 2007 01:20:13 -0700 Subject: robust futex thread exit race Calling handle_futex_death in exit_robust_list for the different robust mutexes of a thread basically frees the mutex. Another thread might grab the lock immediately which updates the next pointer of the mutex. fetch_robust_entry over the next pointer might therefore branch into the robust mutex list of a different thread. This can cause two problems: 1) some mutexes held by the dead thread are not getting freed and 2) some mutexs held by a different thread are freed. The next point need to be read before calling handle_futex_death. Signed-off-by: Martin Schwidefsky Acked-by: Ingo Molnar Acked-by: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/futex.c | 26 ++++++++++++++++---------- kernel/futex_compat.c | 28 ++++++++++++++++++---------- 2 files changed, 34 insertions(+), 20 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index e8935b195e88..fcc94e7b4086 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1943,9 +1943,10 @@ static inline int fetch_robust_entry(struct robust_list __user **entry, void exit_robust_list(struct task_struct *curr) { struct robust_list_head __user *head = curr->robust_list; - struct robust_list __user *entry, *pending; - unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; + struct robust_list __user *entry, *next_entry, *pending; + unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip; unsigned long futex_offset; + int rc; /* * Fetch the list head (which was registered earlier, via @@ -1965,11 +1966,13 @@ void exit_robust_list(struct task_struct *curr) if (fetch_robust_entry(&pending, &head->list_op_pending, &pip)) return; - if (pending) - handle_futex_death((void __user *)pending + futex_offset, - curr, pip); - + next_entry = NULL; /* avoid warning with gcc */ while (entry != &head->list) { + /* + * Fetch the next entry in the list before calling + * handle_futex_death: + */ + rc = fetch_robust_entry(&next_entry, &entry->next, &next_pi); /* * A pending lock might already be on the list, so * don't process it twice: @@ -1978,11 +1981,10 @@ void exit_robust_list(struct task_struct *curr) if (handle_futex_death((void __user *)entry + futex_offset, curr, pi)) return; - /* - * Fetch the next entry in the list: - */ - if (fetch_robust_entry(&entry, &entry->next, &pi)) + if (rc) return; + entry = next_entry; + pi = next_pi; /* * Avoid excessively long or circular lists: */ @@ -1991,6 +1993,10 @@ void exit_robust_list(struct task_struct *curr) cond_resched(); } + + if (pending) + handle_futex_death((void __user *)pending + futex_offset, + curr, pip); } long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout, diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c index 7e52eb051f22..2c2e2954b713 100644 --- a/kernel/futex_compat.c +++ b/kernel/futex_compat.c @@ -38,10 +38,11 @@ fetch_robust_entry(compat_uptr_t *uentry, struct robust_list __user **entry, void compat_exit_robust_list(struct task_struct *curr) { struct compat_robust_list_head __user *head = curr->compat_robust_list; - struct robust_list __user *entry, *pending; - unsigned int limit = ROBUST_LIST_LIMIT, pi, pip; - compat_uptr_t uentry, upending; + struct robust_list __user *entry, *next_entry, *pending; + unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip; + compat_uptr_t uentry, next_uentry, upending; compat_long_t futex_offset; + int rc; /* * Fetch the list head (which was registered earlier, via @@ -61,10 +62,15 @@ void compat_exit_robust_list(struct task_struct *curr) if (fetch_robust_entry(&upending, &pending, &head->list_op_pending, &pip)) return; - if (pending) - handle_futex_death((void __user *)pending + futex_offset, curr, pip); + next_entry = NULL; /* avoid warning with gcc */ while (entry != (struct robust_list __user *) &head->list) { + /* + * Fetch the next entry in the list before calling + * handle_futex_death: + */ + rc = fetch_robust_entry(&next_uentry, &next_entry, + (compat_uptr_t __user *)&entry->next, &next_pi); /* * A pending lock might already be on the list, so * dont process it twice: @@ -74,12 +80,11 @@ void compat_exit_robust_list(struct task_struct *curr) curr, pi)) return; - /* - * Fetch the next entry in the list: - */ - if (fetch_robust_entry(&uentry, &entry, - (compat_uptr_t __user *)&entry->next, &pi)) + if (rc) return; + uentry = next_uentry; + entry = next_entry; + pi = next_pi; /* * Avoid excessively long or circular lists: */ @@ -88,6 +93,9 @@ void compat_exit_robust_list(struct task_struct *curr) cond_resched(); } + if (pending) + handle_futex_death((void __user *)pending + futex_offset, + curr, pip); } asmlinkage long -- cgit v1.2.3-58-ga151 From 564256c9e06d75e16d894a2cd30604bd6582cbba Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Mon, 1 Oct 2007 16:39:37 +1000 Subject: Revert "[XFS] Avoid replaying inode buffer initialisation log items if on-disk version is newer." This reverts commit b394e43e995d08821588a22561c6a71a63b4ff27. Lachlan McIlroy says: It tried to fix an issue where log replay is replaying an inode cluster initialisation transaction that should not be replayed because the inode cluster on disk is more up to date. Since we don't log file sizes (we rely on inode flushing to get them to disk) then we can't just replay all the transations in the log and expect the inode to be completely restored. We lose file size updates. Unfortunately this fix is causing more (serious) problems than it is fixing. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29804a Signed-off-by: Lachlan McIlroy Signed-off-by: Tim Shimmin --- fs/xfs/xfs_buf_item.h | 5 ----- fs/xfs/xfs_log_recover.c | 51 +++--------------------------------------------- fs/xfs/xfs_trans_buf.c | 1 - 3 files changed, 3 insertions(+), 54 deletions(-) diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h index fa25b7dcc6c3..d7e136143066 100644 --- a/fs/xfs/xfs_buf_item.h +++ b/fs/xfs/xfs_buf_item.h @@ -52,11 +52,6 @@ typedef struct xfs_buf_log_format_t { #define XFS_BLI_UDQUOT_BUF 0x4 #define XFS_BLI_PDQUOT_BUF 0x8 #define XFS_BLI_GDQUOT_BUF 0x10 -/* - * This flag indicates that the buffer contains newly allocated - * inodes. - */ -#define XFS_BLI_INODE_NEW_BUF 0x20 #define XFS_BLI_CHUNK 128 #define XFS_BLI_SHIFT 7 diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 7174991f4bef..8ae6e8e5f3db 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1874,7 +1874,6 @@ xlog_recover_do_inode_buffer( /*ARGSUSED*/ STATIC void xlog_recover_do_reg_buffer( - xfs_mount_t *mp, xlog_recover_item_t *item, xfs_buf_t *bp, xfs_buf_log_format_t *buf_f) @@ -1885,50 +1884,6 @@ xlog_recover_do_reg_buffer( unsigned int *data_map = NULL; unsigned int map_size = 0; int error; - int stale_buf = 1; - - /* - * Scan through the on-disk inode buffer and attempt to - * determine if it has been written to since it was logged. - * - * - If any of the magic numbers are incorrect then the buffer is stale - * - If any of the modes are non-zero then the buffer is not stale - * - If all of the modes are zero and at least one of the generation - * counts is non-zero then the buffer is stale - * - * If the end result is a stale buffer then the log buffer is replayed - * otherwise it is skipped. - * - * This heuristic is not perfect. It can be improved by scanning the - * entire inode chunk for evidence that any of the inode clusters have - * been updated. To fix this problem completely we will need a major - * architectural change to the logging system. - */ - if (buf_f->blf_flags & XFS_BLI_INODE_NEW_BUF) { - xfs_dinode_t *dip; - int inodes_per_buf; - int mode_count = 0; - int gen_count = 0; - - stale_buf = 0; - inodes_per_buf = XFS_BUF_COUNT(bp) >> mp->m_sb.sb_inodelog; - for (i = 0; i < inodes_per_buf; i++) { - dip = (xfs_dinode_t *)xfs_buf_offset(bp, - i * mp->m_sb.sb_inodesize); - if (be16_to_cpu(dip->di_core.di_magic) != - XFS_DINODE_MAGIC) { - stale_buf = 1; - break; - } - if (dip->di_core.di_mode) - mode_count++; - if (dip->di_core.di_gen) - gen_count++; - } - - if (!mode_count && gen_count) - stale_buf = 1; - } switch (buf_f->blf_type) { case XFS_LI_BUF: @@ -1962,7 +1917,7 @@ xlog_recover_do_reg_buffer( -1, 0, XFS_QMOPT_DOWARN, "dquot_buf_recover"); } - if (!error && stale_buf) + if (!error) memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLI_SHIFT), /* dest */ item->ri_buf[i].i_addr, /* source */ @@ -2134,7 +2089,7 @@ xlog_recover_do_dquot_buffer( if (log->l_quotaoffs_flag & type) return; - xlog_recover_do_reg_buffer(mp, item, bp, buf_f); + xlog_recover_do_reg_buffer(item, bp, buf_f); } /* @@ -2235,7 +2190,7 @@ xlog_recover_do_buffer_trans( (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) { xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f); } else { - xlog_recover_do_reg_buffer(mp, item, bp, buf_f); + xlog_recover_do_reg_buffer(item, bp, buf_f); } if (error) return XFS_ERROR(error); diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c index 95fff6872a2f..60b6b898022b 100644 --- a/fs/xfs/xfs_trans_buf.c +++ b/fs/xfs/xfs_trans_buf.c @@ -966,7 +966,6 @@ xfs_trans_inode_alloc_buf( ASSERT(atomic_read(&bip->bli_refcount) > 0); bip->bli_flags |= XFS_BLI_INODE_ALLOC_BUF; - bip->bli_format.blf_flags |= XFS_BLI_INODE_NEW_BUF; } -- cgit v1.2.3-58-ga151 From 75723957673bfa10c98b735259f891cc79cf0450 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 1 Oct 2007 13:17:28 -0700 Subject: Fix possible splice() mmap_sem deadlock Nick Piggin points out that splice isn't being good about the mmap semaphore: while two readers can nest inside each others, it does leave a possible deadlock if a writer (ie a new mmap()) comes in during that nesting. Original "just move the locking" patch by Nick, replaced by one by me based on an optimistic pagefault_disable(). And then Jens tested and updated that patch. Reported-by: Nick Piggin Tested-by: Jens Axboe Cc: Andrew Morton Signed-off-by: Linus Torvalds --- fs/splice.c | 46 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index c010a72ca2d2..e95a36228863 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -1223,6 +1223,33 @@ static long do_splice(struct file *in, loff_t __user *off_in, return -EINVAL; } +/* + * Do a copy-from-user while holding the mmap_semaphore for reading, in a + * manner safe from deadlocking with simultaneous mmap() (grabbing mmap_sem + * for writing) and page faulting on the user memory pointed to by src. + * This assumes that we will very rarely hit the partial != 0 path, or this + * will not be a win. + */ +static int copy_from_user_mmap_sem(void *dst, const void __user *src, size_t n) +{ + int partial; + + pagefault_disable(); + partial = __copy_from_user_inatomic(dst, src, n); + pagefault_enable(); + + /* + * Didn't copy everything, drop the mmap_sem and do a faulting copy + */ + if (unlikely(partial)) { + up_read(¤t->mm->mmap_sem); + partial = copy_from_user(dst, src, n); + down_read(¤t->mm->mmap_sem); + } + + return partial; +} + /* * Map an iov into an array of pages and offset/length tupples. With the * partial_page structure, we can map several non-contiguous ranges into @@ -1236,31 +1263,26 @@ static int get_iovec_page_array(const struct iovec __user *iov, { int buffers = 0, error = 0; - /* - * It's ok to take the mmap_sem for reading, even - * across a "get_user()". - */ down_read(¤t->mm->mmap_sem); while (nr_vecs) { unsigned long off, npages; + struct iovec entry; void __user *base; size_t len; int i; - /* - * Get user address base and length for this iovec. - */ - error = get_user(base, &iov->iov_base); - if (unlikely(error)) - break; - error = get_user(len, &iov->iov_len); - if (unlikely(error)) + error = -EFAULT; + if (copy_from_user_mmap_sem(&entry, iov, sizeof(entry))) break; + base = entry.iov_base; + len = entry.iov_len; + /* * Sanity check this iovec. 0 read succeeds. */ + error = 0; if (unlikely(!len)) break; error = -EFAULT; -- cgit v1.2.3-58-ga151 From e48395f1753cab0fde6c03f1db833cece9ef2ba0 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 1 Oct 2007 07:45:55 +1000 Subject: [POWERPC] Fix xics set_affinity code On a POWER6 machine running 2.6.23-rc8 I sometimes see the following error: xics_set_affinity: No online cpus in the mask 00000000,00000000,00000000,00000001 for irq 20 In a desperate attempt to get a changelog entry in 2.6.23, I took a look into it. It turns out we are passing a real and not a virtual irq into get_irq_server. This works for the case where hwirq < NR_IRQS and we set virq = hwirq. In my case however hwirq = 590082 and we try and access irq_desc[590082], slightly past the end at 512 entries. Lucky we ship lots of memory with our machines. Signed-off-by: Anton Blanchard Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/xics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 5bd90a7eb763..f0b5ff17d860 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -419,7 +419,7 @@ static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) * For the moment only implement delivery to all cpus or one cpu. * Get current irq_server for the given irq */ - irq_server = get_irq_server(irq, 1); + irq_server = get_irq_server(virq, 1); if (irq_server == -1) { char cpulist[128]; cpumask_scnprintf(cpulist, sizeof(cpulist), cpumask); -- cgit v1.2.3-58-ga151 From cf8dc57cbac0fe089308f57c333ab763c36782ff Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 1 Oct 2007 01:20:08 -0700 Subject: x86_64: increase VDSO_TEXT_OFFSET for ancient binutils For some reason old binutils genertate larger headers so increase the text offset of the vdso to avoid linker errors. Roland McGrath explains: "There are extra symbols in the '.dynsym' section that are responsible for the size difference (They also cause corresponding inflation in '.gnu.version') Older ld's wrongly generated these unneeded symbols in .dynsym. This was fixed not all that long ago (2006); binutils-2.17.50.0.6 might be the first fixed version, but I have not verified for sure where the cutoff was. The unneeded symbols et al from old ld add almost 700 bytes excess. This limits fairly tightly the amount by which the actual text and data in the vDSO can grow in the future without pushing the whole file over 4kb. If it does grow later on, we should consider changing the layout with a config option or something to pack it better without that padding, when building the kernel with newer binutils." Signed-off-by: Andi Kleen Cc: Roland McGrath Cc: Badari Pulavarty Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86_64/vdso/voffset.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86_64/vdso/voffset.h b/arch/x86_64/vdso/voffset.h index 5304204911f2..4af67c79085f 100644 --- a/arch/x86_64/vdso/voffset.h +++ b/arch/x86_64/vdso/voffset.h @@ -1 +1 @@ -#define VDSO_TEXT_OFFSET 0x500 +#define VDSO_TEXT_OFFSET 0x600 -- cgit v1.2.3-58-ga151 From 3146b39c185f8a436d430132457e84fa1d8f8208 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 1 Oct 2007 20:24:52 -0700 Subject: Linux 2.6.23-rc9 No, I didn't want to do this, but we had more stuff go in after -rc8 than we had in the previous -rc. Gaah. --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4dac25301d5f..6fc97bfea36c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 23 -EXTRAVERSION =-rc8 +EXTRAVERSION =-rc9 NAME = Arr Matey! A Hairy Bilge Rat! # *DOCUMENTATION* -- cgit v1.2.3-58-ga151 From 32740ddc1095e5e320bf961dda146bf97bc28adb Mon Sep 17 00:00:00 2001 From: Alexey Kuznetsov Date: Sun, 30 Sep 2007 17:51:33 -0700 Subject: [SFQ]: Remove artificial limitation for queue limit. This is followup to Patrick's patch. A little optimization to enqueue routine allows to remove artificial limitation on queue length. Plus, testing showed that hash function used by SFQ is too bad or even worse. It does not even sweep the whole range of hash values. Switched to Jenkins' hash. Signed-off-by: Alexey Kuznetsov Signed-off-by: David S. Miller --- net/sched/sch_sfq.c | 47 +++++++++++++++++++++++++++++++---------------- 1 file changed, 31 insertions(+), 16 deletions(-) diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 3a23e30bc79e..b542c875e154 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -95,7 +96,7 @@ struct sfq_sched_data /* Variables */ struct timer_list perturb_timer; - int perturbation; + u32 perturbation; sfq_index tail; /* Index of current slot in round */ sfq_index max_depth; /* Maximal depth */ @@ -109,12 +110,7 @@ struct sfq_sched_data static __inline__ unsigned sfq_fold_hash(struct sfq_sched_data *q, u32 h, u32 h1) { - int pert = q->perturbation; - - /* Have we any rotation primitives? If not, WHY? */ - h ^= (h1<>(0x1F - pert)); - h ^= h>>10; - return h & 0x3FF; + return jhash_2words(h, h1, q->perturbation) & (SFQ_HASH_DIVISOR - 1); } static unsigned sfq_hash(struct sfq_sched_data *q, struct sk_buff *skb) @@ -256,6 +252,13 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc* sch) q->ht[hash] = x = q->dep[SFQ_DEPTH].next; q->hash[x] = hash; } + /* If selected queue has length q->limit, this means that + * all another queues are empty and that we do simple tail drop, + * i.e. drop _this_ packet. + */ + if (q->qs[x].qlen >= q->limit) + return qdisc_drop(skb, sch); + sch->qstats.backlog += skb->len; __skb_queue_tail(&q->qs[x], skb); sfq_inc(q, x); @@ -294,6 +297,19 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc* sch) } sch->qstats.backlog += skb->len; __skb_queue_head(&q->qs[x], skb); + /* If selected queue has length q->limit+1, this means that + * all another queues are empty and we do simple tail drop. + * This packet is still requeued at head of queue, tail packet + * is dropped. + */ + if (q->qs[x].qlen > q->limit) { + skb = q->qs[x].prev; + __skb_unlink(skb, &q->qs[x]); + sch->qstats.drops++; + sch->qstats.backlog -= skb->len; + kfree_skb(skb); + return NET_XMIT_CN; + } sfq_inc(q, x); if (q->qs[x].qlen == 1) { /* The flow is new */ if (q->tail == SFQ_DEPTH) { /* It is the first flow */ @@ -370,12 +386,10 @@ static void sfq_perturbation(unsigned long arg) struct Qdisc *sch = (struct Qdisc*)arg; struct sfq_sched_data *q = qdisc_priv(sch); - q->perturbation = net_random()&0x1F; + get_random_bytes(&q->perturbation, 4); - if (q->perturb_period) { - q->perturb_timer.expires = jiffies + q->perturb_period; - add_timer(&q->perturb_timer); - } + if (q->perturb_period) + mod_timer(&q->perturb_timer, jiffies + q->perturb_period); } static int sfq_change(struct Qdisc *sch, struct rtattr *opt) @@ -391,7 +405,7 @@ static int sfq_change(struct Qdisc *sch, struct rtattr *opt) q->quantum = ctl->quantum ? : psched_mtu(sch->dev); q->perturb_period = ctl->perturb_period*HZ; if (ctl->limit) - q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 2); + q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 1); qlen = sch->q.qlen; while (sch->q.qlen > q->limit) @@ -400,8 +414,8 @@ static int sfq_change(struct Qdisc *sch, struct rtattr *opt) del_timer(&q->perturb_timer); if (q->perturb_period) { - q->perturb_timer.expires = jiffies + q->perturb_period; - add_timer(&q->perturb_timer); + mod_timer(&q->perturb_timer, jiffies + q->perturb_period); + get_random_bytes(&q->perturbation, 4); } sch_tree_unlock(sch); return 0; @@ -423,12 +437,13 @@ static int sfq_init(struct Qdisc *sch, struct rtattr *opt) q->dep[i+SFQ_DEPTH].next = i+SFQ_DEPTH; q->dep[i+SFQ_DEPTH].prev = i+SFQ_DEPTH; } - q->limit = SFQ_DEPTH - 2; + q->limit = SFQ_DEPTH - 1; q->max_depth = 0; q->tail = SFQ_DEPTH; if (opt == NULL) { q->quantum = psched_mtu(sch->dev); q->perturb_period = 0; + get_random_bytes(&q->perturbation, 4); } else { int err = sfq_change(sch, opt); if (err) -- cgit v1.2.3-58-ga151 From 9b42c336d06411e6463949d2dac63949f66ff70b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 1 Oct 2007 13:58:36 -0700 Subject: [TCP]: secure_tcp_sequence_number() should not use a too fast clock TCP V4 sequence numbers are 32bits, and RFC 793 assumed a 250 KHz clock. In order to follow network speed increase, we can use a faster clock, but we should limit this clock so that the delay between two rollovers is greater than MSL (TCP Maximum Segment Lifetime : 2 minutes) Choosing a 64 nsec clock should be OK, since the rollovers occur every 274 seconds. Problem spotted by Denys Fedoryshchenko [ This bug was introduced by f85958151900f9d30fa5ff941b0ce71eaa45a7de ] Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/char/random.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 397c714cf2ba..af274e5a25ee 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1550,11 +1550,13 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr, * As close as possible to RFC 793, which * suggests using a 250 kHz clock. * Further reading shows this assumes 2 Mb/s networks. - * For 10 Gb/s Ethernet, a 1 GHz clock is appropriate. - * That's funny, Linux has one built in! Use it! - * (Networks are faster now - should this be increased?) + * For 10 Mb/s Ethernet, a 1 MHz clock is appropriate. + * For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but + * we also need to limit the resolution so that the u32 seq + * overlaps less than one time per MSL (2 minutes). + * Choosing a clock of 64 ns period is OK. (period of 274 s) */ - seq += ktime_get_real().tv64; + seq += ktime_get_real().tv64 >> 6; #if 0 printk("init_seq(%lx, %lx, %d, %d) = %d\n", saddr, daddr, sport, dport, seq); -- cgit v1.2.3-58-ga151 From 04045f98e0457aba7d4e6736f37eed189c48a5f7 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 1 Oct 2007 21:03:54 -0700 Subject: [IEEE80211]: avoid integer underflow for runt rx frames Reported by Chris Evans : > The summary is that an evil 80211 frame can crash out a victim's > machine. It only applies to drivers using the 80211 wireless code, and > only then to certain drivers (and even then depends on a card's > firmware not dropping a dubious packet). I must confess I'm not > keeping track of Linux wireless support, and the different protocol > stacks etc. > > Details are as follows: > > ieee80211_rx() does not explicitly check that "skb->len >= hdrlen". > There are other skb->len checks, but not enough to prevent a subtle > off-by-two error if the frame has the IEEE80211_STYPE_QOS_DATA flag > set. > > This leads to integer underflow and crash here: > > if (frag != 0) > flen -= hdrlen; > > (flen is subsequently used as a memcpy length parameter). How about this? Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- net/ieee80211/ieee80211_rx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index f2de2e48b021..6284c99b456e 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -366,6 +366,12 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, frag = WLAN_GET_SEQ_FRAG(sc); hdrlen = ieee80211_get_hdrlen(fc); + if (skb->len < hdrlen) { + printk(KERN_INFO "%s: invalid SKB length %d\n", + dev->name, skb->len); + goto rx_dropped; + } + /* Put this code here so that we avoid duplicating it in all * Rx paths. - Jean II */ #ifdef CONFIG_WIRELESS_EXT -- cgit v1.2.3-58-ga151 From 25e5566ed38650f7990041fcd20571d6ddd2a040 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 2 Oct 2007 01:03:09 -0700 Subject: [SPARC64]: Fix missing load-twin usage in Niagara-1 memcpy. For the case where the source is not aligned modulo 8 we don't use load-twins to suck the data in and this kills performance since normal loads allocate in the L1 cache (unlike load-twin) and thus big memcpys swipe the entire L1 D-cache. We need to allocate a register window to implement this properly, but that actually simplifies a lot of things as a nice side-effect. Signed-off-by: David S. Miller --- arch/sparc64/lib/NGcopy_from_user.S | 8 +- arch/sparc64/lib/NGcopy_to_user.S | 8 +- arch/sparc64/lib/NGmemcpy.S | 371 +++++++++++++++++++++--------------- 3 files changed, 221 insertions(+), 166 deletions(-) diff --git a/arch/sparc64/lib/NGcopy_from_user.S b/arch/sparc64/lib/NGcopy_from_user.S index 2d93456f76dd..e7f433f71b42 100644 --- a/arch/sparc64/lib/NGcopy_from_user.S +++ b/arch/sparc64/lib/NGcopy_from_user.S @@ -1,6 +1,6 @@ /* NGcopy_from_user.S: Niagara optimized copy from userspace. * - * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ #define EX_LD(x) \ @@ -8,8 +8,8 @@ .section .fixup; \ .align 4; \ 99: wr %g0, ASI_AIUS, %asi;\ - retl; \ - mov 1, %o0; \ + ret; \ + restore %g0, 1, %o0; \ .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ @@ -24,7 +24,7 @@ #define LOAD(type,addr,dest) type##a [addr] ASI_AIUS, dest #define LOAD_TWIN(addr_reg,dest0,dest1) \ ldda [addr_reg] ASI_BLK_INIT_QUAD_LDD_AIUS, dest0 -#define EX_RETVAL(x) 0 +#define EX_RETVAL(x) %g0 #ifdef __KERNEL__ #define PREAMBLE \ diff --git a/arch/sparc64/lib/NGcopy_to_user.S b/arch/sparc64/lib/NGcopy_to_user.S index 34112d5054ef..6ea01c5532a0 100644 --- a/arch/sparc64/lib/NGcopy_to_user.S +++ b/arch/sparc64/lib/NGcopy_to_user.S @@ -1,6 +1,6 @@ /* NGcopy_to_user.S: Niagara optimized copy to userspace. * - * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ #define EX_ST(x) \ @@ -8,8 +8,8 @@ .section .fixup; \ .align 4; \ 99: wr %g0, ASI_AIUS, %asi;\ - retl; \ - mov 1, %o0; \ + ret; \ + restore %g0, 1, %o0; \ .section __ex_table,"a";\ .align 4; \ .word 98b, 99b; \ @@ -23,7 +23,7 @@ #define FUNC_NAME NGcopy_to_user #define STORE(type,src,addr) type##a src, [addr] ASI_AIUS #define STORE_ASI ASI_BLK_INIT_QUAD_LDD_AIUS -#define EX_RETVAL(x) 0 +#define EX_RETVAL(x) %g0 #ifdef __KERNEL__ /* Writing to %asi is _expensive_ so we hardcode it. diff --git a/arch/sparc64/lib/NGmemcpy.S b/arch/sparc64/lib/NGmemcpy.S index 66063a9a66b8..605cb3f09900 100644 --- a/arch/sparc64/lib/NGmemcpy.S +++ b/arch/sparc64/lib/NGmemcpy.S @@ -1,6 +1,6 @@ /* NGmemcpy.S: Niagara optimized memcpy. * - * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ #ifdef __KERNEL__ @@ -16,6 +16,12 @@ wr %g0, ASI_PNF, %asi #endif +#ifdef __sparc_v9__ +#define SAVE_AMOUNT 128 +#else +#define SAVE_AMOUNT 64 +#endif + #ifndef STORE_ASI #define STORE_ASI ASI_BLK_INIT_QUAD_LDD_P #endif @@ -50,7 +56,11 @@ #endif #ifndef STORE_INIT +#ifndef SIMULATE_NIAGARA_ON_NON_NIAGARA #define STORE_INIT(src,addr) stxa src, [addr] %asi +#else +#define STORE_INIT(src,addr) stx src, [addr + 0x00] +#endif #endif #ifndef FUNC_NAME @@ -73,18 +83,19 @@ .globl FUNC_NAME .type FUNC_NAME,#function -FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ - srlx %o2, 31, %g2 +FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ + PREAMBLE + save %sp, -SAVE_AMOUNT, %sp + srlx %i2, 31, %g2 cmp %g2, 0 tne %xcc, 5 - PREAMBLE - mov %o0, GLOBAL_SPARE - cmp %o2, 0 + mov %i0, %o0 + cmp %i2, 0 be,pn %XCC, 85f - or %o0, %o1, %o3 - cmp %o2, 16 + or %o0, %i1, %i3 + cmp %i2, 16 blu,a,pn %XCC, 80f - or %o3, %o2, %o3 + or %i3, %i2, %i3 /* 2 blocks (128 bytes) is the minimum we can do the block * copy with. We need to ensure that we'll iterate at least @@ -93,31 +104,31 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ * to (64 - 1) bytes from the length before we perform the * block copy loop. */ - cmp %o2, (2 * 64) + cmp %i2, (2 * 64) blu,pt %XCC, 70f - andcc %o3, 0x7, %g0 + andcc %i3, 0x7, %g0 /* %o0: dst - * %o1: src - * %o2: len (known to be >= 128) + * %i1: src + * %i2: len (known to be >= 128) * - * The block copy loops will use %o4/%o5,%g2/%g3 as + * The block copy loops will use %i4/%i5,%g2/%g3 as * temporaries while copying the data. */ - LOAD(prefetch, %o1, #one_read) + LOAD(prefetch, %i1, #one_read) wr %g0, STORE_ASI, %asi /* Align destination on 64-byte boundary. */ - andcc %o0, (64 - 1), %o4 + andcc %o0, (64 - 1), %i4 be,pt %XCC, 2f - sub %o4, 64, %o4 - sub %g0, %o4, %o4 ! bytes to align dst - sub %o2, %o4, %o2 -1: subcc %o4, 1, %o4 - EX_LD(LOAD(ldub, %o1, %g1)) + sub %i4, 64, %i4 + sub %g0, %i4, %i4 ! bytes to align dst + sub %i2, %i4, %i2 +1: subcc %i4, 1, %i4 + EX_LD(LOAD(ldub, %i1, %g1)) EX_ST(STORE(stb, %g1, %o0)) - add %o1, 1, %o1 + add %i1, 1, %i1 bne,pt %XCC, 1b add %o0, 1, %o0 @@ -136,111 +147,155 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ * aligned store data at a time, this is easy to ensure. */ 2: - andcc %o1, (16 - 1), %o4 - andn %o2, (64 - 1), %g1 ! block copy loop iterator - sub %o2, %g1, %o2 ! final sub-block copy bytes + andcc %i1, (16 - 1), %i4 + andn %i2, (64 - 1), %g1 ! block copy loop iterator be,pt %XCC, 50f - cmp %o4, 8 - be,a,pt %XCC, 10f - sub %o1, 0x8, %o1 + sub %i2, %g1, %i2 ! final sub-block copy bytes + + cmp %i4, 8 + be,pt %XCC, 10f + sub %i1, %i4, %i1 /* Neither 8-byte nor 16-byte aligned, shift and mask. */ - mov %g1, %o4 - and %o1, 0x7, %g1 - sll %g1, 3, %g1 - mov 64, %o3 - andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1, %g2)) - sub %o3, %g1, %o3 - sllx %g2, %g1, %g2 + and %i4, 0x7, GLOBAL_SPARE + sll GLOBAL_SPARE, 3, GLOBAL_SPARE + mov 64, %i5 + EX_LD(LOAD_TWIN(%i1, %g2, %g3)) + sub %i5, GLOBAL_SPARE, %i5 + mov 16, %o4 + mov 32, %o5 + mov 48, %o7 + mov 64, %i3 + + bg,pn %XCC, 9f + nop -#define SWIVEL_ONE_DWORD(SRC, TMP1, TMP2, PRE_VAL, PRE_SHIFT, POST_SHIFT, DST)\ - EX_LD(LOAD(ldx, SRC, TMP1)); \ - srlx TMP1, PRE_SHIFT, TMP2; \ - or TMP2, PRE_VAL, TMP2; \ - EX_ST(STORE_INIT(TMP2, DST)); \ - sllx TMP1, POST_SHIFT, PRE_VAL; - -1: add %o1, 0x8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x00) - add %o1, 0x8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x08) - add %o1, 0x8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x10) - add %o1, 0x8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x18) - add %o1, 32, %o1 - LOAD(prefetch, %o1, #one_read) - sub %o1, 32 - 8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x20) - add %o1, 8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x28) - add %o1, 8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x30) - add %o1, 8, %o1 - SWIVEL_ONE_DWORD(%o1, %g3, %o5, %g2, %o3, %g1, %o0 + 0x38) - subcc %o4, 64, %o4 - bne,pt %XCC, 1b +#define MIX_THREE_WORDS(WORD1, WORD2, WORD3, PRE_SHIFT, POST_SHIFT, TMP) \ + sllx WORD1, POST_SHIFT, WORD1; \ + srlx WORD2, PRE_SHIFT, TMP; \ + sllx WORD2, POST_SHIFT, WORD2; \ + or WORD1, TMP, WORD1; \ + srlx WORD3, PRE_SHIFT, TMP; \ + or WORD2, TMP, WORD2; + +8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3)) + MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1) + LOAD(prefetch, %i1 + %i3, #one_read) + + EX_ST(STORE_INIT(%g2, %o0 + 0x00)) + EX_ST(STORE_INIT(%g3, %o0 + 0x08)) + + EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3)) + MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%o2, %o0 + 0x10)) + EX_ST(STORE_INIT(%o3, %o0 + 0x18)) + + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%g2, %o0 + 0x20)) + EX_ST(STORE_INIT(%g3, %o0 + 0x28)) + + EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3)) + add %i1, 64, %i1 + MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%o2, %o0 + 0x30)) + EX_ST(STORE_INIT(%o3, %o0 + 0x38)) + + subcc %g1, 64, %g1 + bne,pt %XCC, 8b add %o0, 64, %o0 -#undef SWIVEL_ONE_DWORD + ba,pt %XCC, 60f + add %i1, %i4, %i1 + +9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3)) + MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1) + LOAD(prefetch, %i1 + %i3, #one_read) + + EX_ST(STORE_INIT(%g3, %o0 + 0x00)) + EX_ST(STORE_INIT(%o2, %o0 + 0x08)) + + EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3)) + MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%o3, %o0 + 0x10)) + EX_ST(STORE_INIT(%g2, %o0 + 0x18)) + + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%g3, %o0 + 0x20)) + EX_ST(STORE_INIT(%o2, %o0 + 0x28)) + + EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3)) + add %i1, 64, %i1 + MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1) + + EX_ST(STORE_INIT(%o3, %o0 + 0x30)) + EX_ST(STORE_INIT(%g2, %o0 + 0x38)) + + subcc %g1, 64, %g1 + bne,pt %XCC, 9b + add %o0, 64, %o0 - srl %g1, 3, %g1 ba,pt %XCC, 60f - add %o1, %g1, %o1 + add %i1, %i4, %i1 10: /* Destination is 64-byte aligned, source was only 8-byte * aligned but it has been subtracted by 8 and we perform * one twin load ahead, then add 8 back into source when * we finish the loop. */ - EX_LD(LOAD_TWIN(%o1, %o4, %o5)) -1: add %o1, 16, %o1 - EX_LD(LOAD_TWIN(%o1, %g2, %g3)) - add %o1, 16 + 32, %o1 - LOAD(prefetch, %o1, #one_read) - sub %o1, 32, %o1 + EX_LD(LOAD_TWIN(%i1, %o4, %o5)) + mov 16, %o7 + mov 32, %g2 + mov 48, %g3 + mov 64, %o1 +1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + LOAD(prefetch, %i1 + %o1, #one_read) EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line - EX_ST(STORE_INIT(%g2, %o0 + 0x08)) - EX_LD(LOAD_TWIN(%o1, %o4, %o5)) - add %o1, 16, %o1 - EX_ST(STORE_INIT(%g3, %o0 + 0x10)) + EX_ST(STORE_INIT(%o2, %o0 + 0x08)) + EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5)) + EX_ST(STORE_INIT(%o3, %o0 + 0x10)) EX_ST(STORE_INIT(%o4, %o0 + 0x18)) - EX_LD(LOAD_TWIN(%o1, %g2, %g3)) - add %o1, 16, %o1 + EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3)) EX_ST(STORE_INIT(%o5, %o0 + 0x20)) - EX_ST(STORE_INIT(%g2, %o0 + 0x28)) - EX_LD(LOAD_TWIN(%o1, %o4, %o5)) - EX_ST(STORE_INIT(%g3, %o0 + 0x30)) + EX_ST(STORE_INIT(%o2, %o0 + 0x28)) + EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5)) + add %i1, 64, %i1 + EX_ST(STORE_INIT(%o3, %o0 + 0x30)) EX_ST(STORE_INIT(%o4, %o0 + 0x38)) subcc %g1, 64, %g1 bne,pt %XCC, 1b add %o0, 64, %o0 ba,pt %XCC, 60f - add %o1, 0x8, %o1 + add %i1, 0x8, %i1 50: /* Destination is 64-byte aligned, and source is 16-byte * aligned. */ -1: EX_LD(LOAD_TWIN(%o1, %o4, %o5)) - add %o1, 16, %o1 - EX_LD(LOAD_TWIN(%o1, %g2, %g3)) - add %o1, 16 + 32, %o1 - LOAD(prefetch, %o1, #one_read) - sub %o1, 32, %o1 + mov 16, %o7 + mov 32, %g2 + mov 48, %g3 + mov 64, %o1 +1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5)) + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + LOAD(prefetch, %i1 + %o1, #one_read) EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line EX_ST(STORE_INIT(%o5, %o0 + 0x08)) - EX_LD(LOAD_TWIN(%o1, %o4, %o5)) - add %o1, 16, %o1 - EX_ST(STORE_INIT(%g2, %o0 + 0x10)) - EX_ST(STORE_INIT(%g3, %o0 + 0x18)) - EX_LD(LOAD_TWIN(%o1, %g2, %g3)) - add %o1, 16, %o1 + EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5)) + EX_ST(STORE_INIT(%o2, %o0 + 0x10)) + EX_ST(STORE_INIT(%o3, %o0 + 0x18)) + EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3)) + add %i1, 64, %i1 EX_ST(STORE_INIT(%o4, %o0 + 0x20)) EX_ST(STORE_INIT(%o5, %o0 + 0x28)) - EX_ST(STORE_INIT(%g2, %o0 + 0x30)) - EX_ST(STORE_INIT(%g3, %o0 + 0x38)) + EX_ST(STORE_INIT(%o2, %o0 + 0x30)) + EX_ST(STORE_INIT(%o3, %o0 + 0x38)) subcc %g1, 64, %g1 bne,pt %XCC, 1b add %o0, 64, %o0 @@ -249,47 +304,47 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 60: membar #Sync - /* %o2 contains any final bytes still needed to be copied + /* %i2 contains any final bytes still needed to be copied * over. If anything is left, we copy it one byte at a time. */ - RESTORE_ASI(%o3) - brz,pt %o2, 85f - sub %o0, %o1, %o3 + RESTORE_ASI(%i3) + brz,pt %i2, 85f + sub %o0, %i1, %i3 ba,a,pt %XCC, 90f .align 64 70: /* 16 < len <= 64 */ bne,pn %XCC, 75f - sub %o0, %o1, %o3 + sub %o0, %i1, %i3 72: - andn %o2, 0xf, %o4 - and %o2, 0xf, %o2 -1: subcc %o4, 0x10, %o4 - EX_LD(LOAD(ldx, %o1, %o5)) - add %o1, 0x08, %o1 - EX_LD(LOAD(ldx, %o1, %g1)) - sub %o1, 0x08, %o1 - EX_ST(STORE(stx, %o5, %o1 + %o3)) - add %o1, 0x8, %o1 - EX_ST(STORE(stx, %g1, %o1 + %o3)) + andn %i2, 0xf, %i4 + and %i2, 0xf, %i2 +1: subcc %i4, 0x10, %i4 + EX_LD(LOAD(ldx, %i1, %i5)) + add %i1, 0x08, %i1 + EX_LD(LOAD(ldx, %i1, %g1)) + sub %i1, 0x08, %i1 + EX_ST(STORE(stx, %i5, %i1 + %i3)) + add %i1, 0x8, %i1 + EX_ST(STORE(stx, %g1, %i1 + %i3)) bgu,pt %XCC, 1b - add %o1, 0x8, %o1 -73: andcc %o2, 0x8, %g0 + add %i1, 0x8, %i1 +73: andcc %i2, 0x8, %g0 be,pt %XCC, 1f nop - sub %o2, 0x8, %o2 - EX_LD(LOAD(ldx, %o1, %o5)) - EX_ST(STORE(stx, %o5, %o1 + %o3)) - add %o1, 0x8, %o1 -1: andcc %o2, 0x4, %g0 + sub %i2, 0x8, %i2 + EX_LD(LOAD(ldx, %i1, %i5)) + EX_ST(STORE(stx, %i5, %i1 + %i3)) + add %i1, 0x8, %i1 +1: andcc %i2, 0x4, %g0 be,pt %XCC, 1f nop - sub %o2, 0x4, %o2 - EX_LD(LOAD(lduw, %o1, %o5)) - EX_ST(STORE(stw, %o5, %o1 + %o3)) - add %o1, 0x4, %o1 -1: cmp %o2, 0 + sub %i2, 0x4, %i2 + EX_LD(LOAD(lduw, %i1, %i5)) + EX_ST(STORE(stw, %i5, %i1 + %i3)) + add %i1, 0x4, %i1 +1: cmp %i2, 0 be,pt %XCC, 85f nop ba,pt %xcc, 90f @@ -300,71 +355,71 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %g1, 0x8, %g1 be,pn %icc, 2f sub %g0, %g1, %g1 - sub %o2, %g1, %o2 + sub %i2, %g1, %i2 1: subcc %g1, 1, %g1 - EX_LD(LOAD(ldub, %o1, %o5)) - EX_ST(STORE(stb, %o5, %o1 + %o3)) + EX_LD(LOAD(ldub, %i1, %i5)) + EX_ST(STORE(stb, %i5, %i1 + %i3)) bgu,pt %icc, 1b - add %o1, 1, %o1 + add %i1, 1, %i1 -2: add %o1, %o3, %o0 - andcc %o1, 0x7, %g1 +2: add %i1, %i3, %o0 + andcc %i1, 0x7, %g1 bne,pt %icc, 8f sll %g1, 3, %g1 - cmp %o2, 16 + cmp %i2, 16 bgeu,pt %icc, 72b nop ba,a,pt %xcc, 73b -8: mov 64, %o3 - andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1, %g2)) - sub %o3, %g1, %o3 - andn %o2, 0x7, %o4 +8: mov 64, %i3 + andn %i1, 0x7, %i1 + EX_LD(LOAD(ldx, %i1, %g2)) + sub %i3, %g1, %i3 + andn %i2, 0x7, %i4 sllx %g2, %g1, %g2 -1: add %o1, 0x8, %o1 - EX_LD(LOAD(ldx, %o1, %g3)) - subcc %o4, 0x8, %o4 - srlx %g3, %o3, %o5 - or %o5, %g2, %o5 - EX_ST(STORE(stx, %o5, %o0)) +1: add %i1, 0x8, %i1 + EX_LD(LOAD(ldx, %i1, %g3)) + subcc %i4, 0x8, %i4 + srlx %g3, %i3, %i5 + or %i5, %g2, %i5 + EX_ST(STORE(stx, %i5, %o0)) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 srl %g1, 3, %g1 - andcc %o2, 0x7, %o2 + andcc %i2, 0x7, %i2 be,pn %icc, 85f - add %o1, %g1, %o1 + add %i1, %g1, %i1 ba,pt %xcc, 90f - sub %o0, %o1, %o3 + sub %o0, %i1, %i3 .align 64 80: /* 0 < len <= 16 */ - andcc %o3, 0x3, %g0 + andcc %i3, 0x3, %g0 bne,pn %XCC, 90f - sub %o0, %o1, %o3 + sub %o0, %i1, %i3 1: - subcc %o2, 4, %o2 - EX_LD(LOAD(lduw, %o1, %g1)) - EX_ST(STORE(stw, %g1, %o1 + %o3)) + subcc %i2, 4, %i2 + EX_LD(LOAD(lduw, %i1, %g1)) + EX_ST(STORE(stw, %g1, %i1 + %i3)) bgu,pt %XCC, 1b - add %o1, 4, %o1 + add %i1, 4, %i1 -85: retl - mov EX_RETVAL(GLOBAL_SPARE), %o0 +85: ret + restore EX_RETVAL(%i0), %g0, %o0 .align 32 90: - subcc %o2, 1, %o2 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o1 + %o3)) + subcc %i2, 1, %i2 + EX_LD(LOAD(ldub, %i1, %g1)) + EX_ST(STORE(stb, %g1, %i1 + %i3)) bgu,pt %XCC, 90b - add %o1, 1, %o1 - retl - mov EX_RETVAL(GLOBAL_SPARE), %o0 + add %i1, 1, %i1 + ret + restore EX_RETVAL(%i0), %g0, %o0 .size FUNC_NAME, .-FUNC_NAME -- cgit v1.2.3-58-ga151 From 30084fbd1caa4b2e1a336fcdef60b68129d1d8f8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 2 Oct 2007 14:13:08 +0200 Subject: sched: fix profile=sleep fix sleep profiling - we lost this chunk in the CFS merge. Found-by: Mel Gorman Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c9fbe8e73a45..67c67a87146e 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -639,6 +639,16 @@ static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se) se->block_start = 0; se->sum_sleep_runtime += delta; + + /* + * Blocking time is in units of nanosecs, so shift by 20 to + * get a milliseconds-range estimation of the amount of + * time that the task spent sleeping: + */ + if (unlikely(prof_on == SLEEP_PROFILING)) { + profile_hits(SLEEP_PROFILING, (void *)get_wchan(tsk), + delta >> 20); + } } #endif } -- cgit v1.2.3-58-ga151 From 4c74d4ec3524a8f31deadd115139dd93bc91d598 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 30 Sep 2007 01:11:20 -0700 Subject: ata_piix: add another TECRA M3 entry to broken suspend list There's a different version of DMI table for TECRA M3 where it has proper vendor and product name entry. Add the entry to the broken suspend list. Angus Turnbull reported and provided initial patch. Signed-off-by: Tejun Heo Cc: Angus Turnbull Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3b8bf1812dc8..6996eb5b7506 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -920,6 +920,13 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev) static int piix_broken_suspend(void) { static struct dmi_system_id sysids[] = { + { + .ident = "TECRA M3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"), + }, + }, { .ident = "TECRA M5", .matches = { -- cgit v1.2.3-58-ga151 From b323e0e49fe9331ee3a7a336af879d6e303b16b3 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Mon, 1 Oct 2007 11:43:22 -0700 Subject: qla3xxx: bugfix: Add memory barrier before accessing rx completion. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 69da95b5ad0c..c3fe1c7c301c 100755 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -2248,6 +2248,7 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev, qdev->rsp_consumer_index) && (work_done < work_to_do)) { net_rsp = qdev->rsp_current; + rmb(); switch (net_rsp->opcode) { case OPCODE_OB_MAC_IOCB_FN0: -- cgit v1.2.3-58-ga151 From 50626297b1beb0a29c0f174be39f36485533216c Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Mon, 1 Oct 2007 11:43:23 -0700 Subject: qla3xxx: bugfix: Fix VLAN rx completion handling. Fix 4032 chip undocumented "feature" where bit-8 is set if the inbound completion is for a VLAN. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index c3fe1c7c301c..ea151315050c 100755 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -2249,6 +2249,12 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev, net_rsp = qdev->rsp_current; rmb(); + /* + * Fix 4032 chipe undocumented "feature" where bit-8 is set if the + * inbound completion is for a VLAN. + */ + if (qdev->device_id == QL3032_DEVICE_ID) + net_rsp->opcode &= 0x7f; switch (net_rsp->opcode) { case OPCODE_OB_MAC_IOCB_FN0: -- cgit v1.2.3-58-ga151 From 593ff56ef2a23ed3a66ee87d9c9b33044b9fb193 Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Mon, 1 Oct 2007 16:02:18 -0700 Subject: mv643xx_eth: Do not modify struct netdev tx_queue_len This driver erroneously zeros dev->tx_queue_len, since mp->tx_ring_size has not yet been initialized. Actually, the driver shouldn't modify tx_queue_len at all and should leave the value set by alloc_etherdev(), currently 1000. Signed-off-by: Dale Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 34288fe038c3..315335671f0f 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1357,7 +1357,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev) #endif dev->watchdog_timeo = 2 * HZ; - dev->tx_queue_len = mp->tx_ring_size; dev->base_addr = 0; dev->change_mtu = mv643xx_eth_change_mtu; dev->do_ioctl = mv643xx_eth_do_ioctl; -- cgit v1.2.3-58-ga151 From f662fe5a0b144efadbfc00e8040e603ec318746e Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 1 Oct 2007 13:36:07 +0200 Subject: dm9601: Fix receive MTU dm9601 didn't take the ethernet header into account when calculating RX MTU, causing packets bigger than 1486 to fail. Signed-off-by: Peter Korsgaard Signed-off-by: Jeff Garzik --- drivers/net/usb/dm9601.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 16c7a0e87850..a2de32fabc17 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -405,7 +405,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &dm9601_ethtool_ops; dev->net->hard_header_len += DM_TX_OVERHEAD; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; - dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD; + dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD; dev->mii.dev = dev->net; dev->mii.mdio_read = dm9601_mdio_read; -- cgit v1.2.3-58-ga151 From d136552e8beadcf5e59089292e2ba44f09e3aad8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 2 Oct 2007 13:16:10 -0400 Subject: aic94xx: fix DMA data direction for SMP requests DMA-mapped SMP (scsi management protocol) requests going /to/ the device need the PCI DMA data direction to indicate such. Signed-off-by: Jeff Garzik --- drivers/scsi/aic94xx/aic94xx_task.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_task.c b/drivers/scsi/aic94xx/aic94xx_task.c index d5d8caba3560..ab13824df856 100644 --- a/drivers/scsi/aic94xx/aic94xx_task.c +++ b/drivers/scsi/aic94xx/aic94xx_task.c @@ -451,7 +451,7 @@ static int asd_build_smp_ascb(struct asd_ascb *ascb, struct sas_task *task, struct scb *scb; pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_req, 1, - PCI_DMA_FROMDEVICE); + PCI_DMA_TODEVICE); pci_map_sg(asd_ha->pcidev, &task->smp_task.smp_resp, 1, PCI_DMA_FROMDEVICE); @@ -486,7 +486,7 @@ static void asd_unbuild_smp_ascb(struct asd_ascb *a) BUG_ON(!task); pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_req, 1, - PCI_DMA_FROMDEVICE); + PCI_DMA_TODEVICE); pci_unmap_sg(a->ha->pcidev, &task->smp_task.smp_resp, 1, PCI_DMA_FROMDEVICE); } -- cgit v1.2.3-58-ga151