From 3a92c319c44a7bcee9f48dff9d97d001943b54c6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Jun 2016 14:46:54 -0500 Subject: PCI: Ignore write combining when mapping I/O port space PCI exposes files like /proc/bus/pci/00/00.0 in procfs. These files support operations like this: ioctl(fd, PCIIOC_MMAP_IS_IO); # request I/O port space ioctl(fd, PCIIOC_WRITE_COMBINE, 1); # request write-combining mmap(fd, ...) Write combining is useful on PCI memory space, but I don't think it makes sense on PCI I/O port space. We *could* change proc_bus_pci_ioctl() to make it impossible to set mmap_state == pci_mmap_io and write_combine at the same time, but that would break the following sequence, which is currently legal: mmap(fd, ...) # default is I/O, non-combining ioctl(fd, PCIIOC_WRITE_COMBINE, 1); # request write-combining ioctl(fd, PCIIOC_MMAP_IS_MEM); # request memory space mmap(fd, ...) # get write-combining mapping Ignore the write-combining flag when mapping I/O port space. This patch should have no functional effect, based on this analysis of all implementations of pci_mmap_page_range(): - ia64 mips parisc sh unicore32 x86 do not support mapping of I/O port space at all. - arm cris microblaze mn10300 sparc xtensa support mapping of I/O port space, but ignore the write_combine argument to pci_mmap_page_range(). - powerpc supports mapping of I/O port space and uses write_combine, and it disables write combining for I/O port space in __pci_mmap_set_pgprot(). This patch makes it possible to remove __pci_mmap_set_pgprot() from powerpc, which simplifies that path. Signed-off-by: Bjorn Helgaas --- drivers/pci/proc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 3f155e78513f..2408abe4ee8c 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -231,7 +231,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma) { struct pci_dev *dev = PDE_DATA(file_inode(file)); struct pci_filp_private *fpriv = file->private_data; - int i, ret; + int i, ret, write_combine; if (!capable(CAP_SYS_RAWIO)) return -EPERM; @@ -245,9 +245,12 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma) if (i >= PCI_ROM_RESOURCE) return -ENODEV; + if (fpriv->mmap_state == pci_mmap_mem) + write_combine = fpriv->write_combine; + else + write_combine = 0; ret = pci_mmap_page_range(dev, vma, - fpriv->mmap_state, - fpriv->write_combine); + fpriv->mmap_state, write_combine); if (ret < 0) return ret; -- cgit v1.2.3-58-ga151 From 1e70cdd6e654a66b4f6296a92cd0f7c265a02429 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 Jun 2016 14:43:33 -0500 Subject: powerpc/pci: Remove __pci_mmap_set_pgprot() The powerpc-specific __pci_mmap_set_pgprot() does two things: 1) Disables write combining for I/O port space mappings This only affects procfs mappings. The pci_mmap_resource() sysfs path only requests write combining for resources with IORESOURCE_PREFETCH set, which doesn't include I/O resources. The only way to request write combining for I/O port space mappings was via the PCIIOC_WRITE_COMBINE ioctl and the proc_bus_pci_mmap() path, and we recently changed that path to ignore write combining for I/O, so this code in powerpc is no longer needed. 2) Automatically enables write combining for mappings of prefetchable resources, even if not requested by the user Both procfs (via PCIIOC_MMAP_IS_MEM and PCIIOC_WRITE_COMBINE ioctls) and sysfs (via "resourceN_wc" files, which are created for resources with IORESOURCE_PREFETCH) provide ways for the user to map PCI memory space with write combining. Users that desire write combining should use one of those ways instead of relying on powerpc-specific behavior. Remove the powerpc-specific __pci_mmap_set_pgprot(). The user-visible effect of this change is that powerpc users mapping prefetchable PCI memory space via procfs without PCIIOC_WRITE_COMBINE or via sysfs "resourceN" (not "resourceN_wc") will get regular uncacheable mappings instead of the write combining mappings they used to get. The new behavior matches the behavior on all other arches that support write combining mapping. [bhelgaas: changelog] Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas --- arch/powerpc/kernel/pci-common.c | 37 ++++--------------------------------- 1 file changed, 4 insertions(+), 33 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 0f7a60f1e9f6..8c6beb0229fe 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -355,36 +355,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, return NULL; } -/* - * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci - * device mapping. - */ -static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, - pgprot_t protection, - enum pci_mmap_state mmap_state, - int write_combine) -{ - - /* Write combine is always 0 on non-memory space mappings. On - * memory space, if the user didn't pass 1, we check for a - * "prefetchable" resource. This is a bit hackish, but we use - * this to workaround the inability of /sysfs to provide a write - * combine bit - */ - if (mmap_state != pci_mmap_mem) - write_combine = 0; - else if (write_combine == 0) { - if (rp->flags & IORESOURCE_PREFETCH) - write_combine = 1; - } - - /* XXX would be nice to have a way to ask for write-through */ - if (write_combine) - return pgprot_noncached_wc(protection); - else - return pgprot_noncached(protection); -} - /* * This one is used by /dev/mem and fbdev who have no clue about the * PCI device, it tries to find the PCI device first and calls the @@ -458,9 +428,10 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; vma->vm_pgoff = offset >> PAGE_SHIFT; - vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, - vma->vm_page_prot, - mmap_state, write_combine); + if (write_combine) + vma->vm_page_prot = pgprot_noncached_wc(vma->vm_page_prot); + else + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot); -- cgit v1.2.3-58-ga151 From c444a2be22144d23dae10821868e6073d3e3ef29 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jun 2016 14:43:33 -0500 Subject: microblaze/PCI: Remove useless __pci_mmap_set_pgprot() The microblaze __pci_mmap_set_pgprot() was apparently copied from powerpc, where it computes either an uncacheable pgprot_t or a write-combining one. But on microblaze, we always use the regular uncacheable pgprot_t. Remove the useless code in __pci_mmap_set_pgprot() and inline it at the only call site. Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu --- arch/microblaze/pci/pci-common.c | 31 +------------------------------ 1 file changed, 1 insertion(+), 30 deletions(-) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 14cba600da7a..1974567f3b4b 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -218,33 +218,6 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, return NULL; } -/* - * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci - * device mapping. - */ -static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, - pgprot_t protection, - enum pci_mmap_state mmap_state, - int write_combine) -{ - pgprot_t prot = protection; - - /* Write combine is always 0 on non-memory space mappings. On - * memory space, if the user didn't pass 1, we check for a - * "prefetchable" resource. This is a bit hackish, but we use - * this to workaround the inability of /sysfs to provide a write - * combine bit - */ - if (mmap_state != pci_mmap_mem) - write_combine = 0; - else if (write_combine == 0) { - if (rp->flags & IORESOURCE_PREFETCH) - write_combine = 1; - } - - return pgprot_noncached(prot); -} - /* * This one is used by /dev/mem and fbdev who have no clue about the * PCI device, it tries to find the PCI device first and calls the @@ -317,9 +290,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; vma->vm_pgoff = offset >> PAGE_SHIFT; - vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, - vma->vm_page_prot, - mmap_state, write_combine); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot); -- cgit v1.2.3-58-ga151 From 8221a013528597edc18d371b22667e8eefca599b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jun 2016 14:43:34 -0500 Subject: PCI: Unify pci_resource_to_user() declarations Replace the pci_resource_to_user() declarations in each arch that defines HAVE_ARCH_PCI_RESOURCE_TO_USER with a single one in linux/pci.h. Change the MIPS static inline implementation to a non-inline version so the static inline doesn't conflict with the new non-static linux/pci.h declaration. No functional change intended. Signed-off-by: Bjorn Helgaas --- arch/microblaze/include/asm/pci.h | 3 --- arch/mips/include/asm/pci.h | 10 ---------- arch/mips/pci/pci.c | 10 ++++++++++ arch/powerpc/include/asm/pci.h | 3 --- arch/sparc/include/asm/pci_64.h | 3 --- include/linux/pci.h | 6 +++++- 6 files changed, 15 insertions(+), 20 deletions(-) diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index fc3ecb55f1b2..2a120bb70e54 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -82,9 +82,6 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file, pgprot_t prot); #define HAVE_ARCH_PCI_RESOURCE_TO_USER -extern void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); extern void pcibios_setup_bus_devices(struct pci_bus *bus); extern void pcibios_setup_bus_self(struct pci_bus *bus); diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 86b239d9d75d..9b63cd41213d 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -80,16 +80,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, #define HAVE_ARCH_PCI_RESOURCE_TO_USER -static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, resource_size_t *start, - resource_size_t *end) -{ - phys_addr_t size = resource_size(rsrc); - - *start = fixup_bigphys_addr(rsrc->start, size); - *end = rsrc->start + size; -} - /* * Dynamic DMA mapping stuff. * MIPS has everything mapped statically. diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index f1b11f0dea2d..5717384a986d 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -319,6 +319,16 @@ void pcibios_fixup_bus(struct pci_bus *bus) EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, resource_size_t *start, + resource_size_t *end) +{ + phys_addr_t size = resource_size(rsrc); + + *start = fixup_bigphys_addr(rsrc->start, size); + *end = rsrc->start + size; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index a6f3ac0d4602..e9bd6cf0212f 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -136,9 +136,6 @@ extern pgprot_t pci_phys_mem_access_prot(struct file *file, pgprot_t prot); #define HAVE_ARCH_PCI_RESOURCE_TO_USER -extern void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose); extern void pcibios_setup_bus_devices(struct pci_bus *bus); diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index 022d16008a00..2303635158f5 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -55,9 +55,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #define HAVE_ARCH_PCI_RESOURCE_TO_USER -void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); #endif /* __KERNEL__ */ #endif /* __SPARC64_PCI_H */ diff --git a/include/linux/pci.h b/include/linux/pci.h index b67e4df20801..9c201d4dbd51 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1554,7 +1554,11 @@ static inline const char *pci_name(const struct pci_dev *pdev) /* Some archs don't want to expose struct resource to userland as-is * in sysfs and /proc */ -#ifndef HAVE_ARCH_PCI_RESOURCE_TO_USER +#ifdef HAVE_ARCH_PCI_RESOURCE_TO_USER +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + resource_size_t *start, resource_size_t *end); +#else static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, resource_size_t *start, resource_size_t *end) -- cgit v1.2.3-58-ga151 From 0ad8f06d589900b0e7006dd5194904f1c0be352c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jun 2016 14:43:34 -0500 Subject: microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() "User" addresses are shown in /sys/devices/pci.../.../resource and /proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F files. For I/O port resources on microblaze, these are PCI bus addresses, i.e., raw BAR values. Previously pci_resource_to_user() computed the user address by subtracting "hose->io_base_virt - _IO_BASE" from the resource start: pci_resource_to_user() if (IO) offset = (unsigned long)hose->io_base_virt - _IO_BASE; *start = rsrc->start - offset; We've already told the PCI core about that "hose->io_base_virt - _IO_BASE" offset: pcibios_setup_phb_resources() res = &hose->io_resource; pci_add_resource_offset(resources, res, hose->io_base_virt - _IO_BASE); so pcibios_resource_to_bus() knows how to do that translation. No functional change intended. Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu --- arch/microblaze/pci/pci-common.c | 42 ++++++++++++++-------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 1974567f3b4b..81556b843a8e 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -444,39 +444,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, resource_size_t *start, resource_size_t *end) { - struct pci_controller *hose = pci_bus_to_host(dev->bus); - resource_size_t offset = 0; + struct pci_bus_region region; - if (hose == NULL) + if (rsrc->flags & IORESOURCE_IO) { + pcibios_resource_to_bus(dev->bus, ®ion, + (struct resource *) rsrc); + *start = region.start; + *end = region.end; return; + } - if (rsrc->flags & IORESOURCE_IO) - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - - /* We pass a fully fixed up address to userland for MMIO instead of - * a BAR value because X is lame and expects to be able to use that - * to pass to /dev/mem ! + /* We pass a CPU physical address to userland for MMIO instead of a + * BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem! * - * That means that we'll have potentially 64 bits values where some - * userland apps only expect 32 (like X itself since it thinks only - * Sparc has 64 bits MMIO) but if we don't do that, we break it on - * 32 bits CHRPs :-( - * - * Hopefully, the sysfs insterface is immune to that gunk. Once X - * has been fixed (and the fix spread enough), we can re-enable the - * 2 lines below and pass down a BAR value to userland. In that case - * we'll also have to re-enable the matching code in - * __pci_mmap_make_offset(). - * - * BenH. + * That means we may have 64-bit values where some apps only expect + * 32 (like X itself since it thinks only Sparc has 64-bit MMIO). */ -#if 0 - else if (rsrc->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; -#endif - - *start = rsrc->start - offset; - *end = rsrc->end - offset; + *start = rsrc->start; + *end = rsrc->end; } /** -- cgit v1.2.3-58-ga151 From 38301358573be7398e43115170f2d76598c8d43b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jun 2016 14:43:34 -0500 Subject: powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus() "User" addresses are shown in /sys/devices/pci.../.../resource and /proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F files. For I/O port resources on powerpc, these are PCI bus addresses, i.e., raw BAR values. Previously pci_resource_to_user() computed the user address by subtracting "hose->io_base_virt - _IO_BASE" from the resource start: pci_resource_to_user() if (IO) offset = (unsigned long)hose->io_base_virt - _IO_BASE; *start = rsrc->start - offset; We've already told the PCI core about that "hose->io_base_virt - _IO_BASE" offset: pcibios_setup_phb_resources() res = &hose->io_resource; offset = pcibios_io_space_offset(); /* i.e., "offset = hose->io_base_virt - _IO_BASE" */ pci_add_resource_offset(resources, res, offset); so pcibios_resource_to_bus() knows how to do that translation. No functional change intended. Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu --- arch/powerpc/kernel/pci-common.c | 42 ++++++++++++++-------------------------- 1 file changed, 14 insertions(+), 28 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8c6beb0229fe..6de6e0e96ce5 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -581,39 +581,25 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, const struct resource *rsrc, resource_size_t *start, resource_size_t *end) { - struct pci_controller *hose = pci_bus_to_host(dev->bus); - resource_size_t offset = 0; + struct pci_bus_region region; - if (hose == NULL) + if (rsrc->flags & IORESOURCE_IO) { + pcibios_resource_to_bus(dev->bus, ®ion, + (struct resource *) rsrc); + *start = region.start; + *end = region.end; return; + } - if (rsrc->flags & IORESOURCE_IO) - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - - /* We pass a fully fixed up address to userland for MMIO instead of - * a BAR value because X is lame and expects to be able to use that - * to pass to /dev/mem ! - * - * That means that we'll have potentially 64 bits values where some - * userland apps only expect 32 (like X itself since it thinks only - * Sparc has 64 bits MMIO) but if we don't do that, we break it on - * 32 bits CHRPs :-( - * - * Hopefully, the sysfs insterface is immune to that gunk. Once X - * has been fixed (and the fix spread enough), we can re-enable the - * 2 lines below and pass down a BAR value to userland. In that case - * we'll also have to re-enable the matching code in - * __pci_mmap_make_offset(). + /* We pass a CPU physical address to userland for MMIO instead of a + * BAR value because X is lame and expects to be able to use that + * to pass to /dev/mem! * - * BenH. + * That means we may have 64-bit values where some apps only expect + * 32 (like X itself since it thinks only Sparc has 64-bit MMIO). */ -#if 0 - else if (rsrc->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; -#endif - - *start = rsrc->start - offset; - *end = rsrc->end - offset; + *start = rsrc->start; + *end = rsrc->end; } /** -- cgit v1.2.3-58-ga151 From 3b146b24a40096d1a42f288e237e24352c93269e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 17 Jun 2016 14:43:34 -0500 Subject: sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus() "User" addresses are shown in /sys/devices/pci.../.../resource and /proc/bus/pci/devices and used as mmap offsets for /proc/bus/pci/BB/DD.F files. On sparc, these are PCI bus addresses, i.e., raw BAR values. Previously pci_resource_to_user() computed the user address by subtracting either pbm->io_space.start or pbm->mem_space.start from the resource start. We've already told the PCI core about those offsets here: pci_scan_one_pbm() pci_add_resource_offset(&resources, &pbm->io_space, pbm->io_space.start); pci_add_resource_offset(&resources, &pbm->mem_space, pbm->mem_space.start); pci_add_resource_offset(&resources, &pbm->mem64_space, pbm->mem_space.start); so pcibios_resource_to_bus() knows how to do that translation. No functional change intended. Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu --- arch/sparc/kernel/pci.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index c2b202d763a1..9c1878f4fa9f 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -986,16 +986,18 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar, const struct resource *rp, resource_size_t *start, resource_size_t *end) { - struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller; - unsigned long offset; - - if (rp->flags & IORESOURCE_IO) - offset = pbm->io_space.start; - else - offset = pbm->mem_space.start; + struct pci_bus_region region; - *start = rp->start - offset; - *end = rp->end - offset; + /* + * "User" addresses are shown in /sys/devices/pci.../.../resource + * and /proc/bus/pci/devices and used as mmap offsets for + * /proc/bus/pci/BB/DD.F files (see proc_bus_pci_mmap()). + * + * On sparc, these are PCI bus addresses, i.e., raw BAR values. + */ + pcibios_resource_to_bus(pdev->bus, ®ion, (struct resource *) rp); + *start = region.start; + *end = region.end; } void pcibios_set_master(struct pci_dev *dev) -- cgit v1.2.3-58-ga151 From 644a544fd9bcd65f524768b85ab22f62ed08e107 Mon Sep 17 00:00:00 2001 From: "Koehrer Mathias (ETAS/ESW5)" Date: Tue, 7 Jun 2016 14:24:17 +0000 Subject: PCI: Extending pci=resource_alignment to specify device/vendor IDs Some uio-based PCI drivers, e.g., uio_cif do not work if the assigned PCI memory resources are not page aligned. By using the kernel option "pci=resource_alignment" it is possible to force single PCI boards to use page alignment for their memory resources. However, this is fairly cumbersome if several of these boards are in use as the specification of the cards has to be done via PCI bus/slot/function number which might change, e.g., by adding another board. Extend the kernel option "pci=resource_alignment" to allow specification of relevant devices via PCI device/vendor (and subdevice/subvendor) IDs. The specification of the devices via device/vendor is indicated by a leading string "pci:" as argument to "pci=resource_alignment". The format of the specification is pci::[::] Signed-off-by: Mathias Koehrer Signed-off-by: Bjorn Helgaas --- Documentation/kernel-parameters.txt | 2 ++ drivers/pci/pci.c | 66 ++++++++++++++++++++++++++----------- 2 files changed, 49 insertions(+), 19 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 82b42c958d1c..0618cdd5707e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2998,6 +2998,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. resource_alignment= Format: [@][:]:.[; ...] + [@]pci::\ + [::][; ...] Specifies alignment and device to reassign aligned memory resources. If is not specified, diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c8b4dbdd1bdd..78de36f1b012 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4755,6 +4755,7 @@ static DEFINE_SPINLOCK(resource_alignment_lock); static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) { int seg, bus, slot, func, align_order, count; + unsigned short vendor, device, subsystem_vendor, subsystem_device; resource_size_t align = 0; char *p; @@ -4768,28 +4769,55 @@ static resource_size_t pci_specified_resource_alignment(struct pci_dev *dev) } else { align_order = -1; } - if (sscanf(p, "%x:%x:%x.%x%n", - &seg, &bus, &slot, &func, &count) != 4) { - seg = 0; - if (sscanf(p, "%x:%x.%x%n", - &bus, &slot, &func, &count) != 3) { - /* Invalid format */ - printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n", - p); + if (strncmp(p, "pci:", 4) == 0) { + /* PCI vendor/device (subvendor/subdevice) ids are specified */ + p += 4; + if (sscanf(p, "%hx:%hx:%hx:%hx%n", + &vendor, &device, &subsystem_vendor, &subsystem_device, &count) != 4) { + if (sscanf(p, "%hx:%hx%n", &vendor, &device, &count) != 2) { + printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: pci:%s\n", + p); + break; + } + subsystem_vendor = subsystem_device = 0; + } + p += count; + if ((!vendor || (vendor == dev->vendor)) && + (!device || (device == dev->device)) && + (!subsystem_vendor || (subsystem_vendor == dev->subsystem_vendor)) && + (!subsystem_device || (subsystem_device == dev->subsystem_device))) { + if (align_order == -1) + align = PAGE_SIZE; + else + align = 1 << align_order; + /* Found */ break; } } - p += count; - if (seg == pci_domain_nr(dev->bus) && - bus == dev->bus->number && - slot == PCI_SLOT(dev->devfn) && - func == PCI_FUNC(dev->devfn)) { - if (align_order == -1) - align = PAGE_SIZE; - else - align = 1 << align_order; - /* Found */ - break; + else { + if (sscanf(p, "%x:%x:%x.%x%n", + &seg, &bus, &slot, &func, &count) != 4) { + seg = 0; + if (sscanf(p, "%x:%x.%x%n", + &bus, &slot, &func, &count) != 3) { + /* Invalid format */ + printk(KERN_ERR "PCI: Can't parse resource_alignment parameter: %s\n", + p); + break; + } + } + p += count; + if (seg == pci_domain_nr(dev->bus) && + bus == dev->bus->number && + slot == PCI_SLOT(dev->devfn) && + func == PCI_FUNC(dev->devfn)) { + if (align_order == -1) + align = PAGE_SIZE; + else + align = 1 << align_order; + /* Found */ + break; + } } if (*p != ';' && *p != ',') { /* End of param or invalid format */ -- cgit v1.2.3-58-ga151 From be9d2e8927cef02076bb7b5b2637cd9f4be2e8df Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:01 +0200 Subject: PCI: Add helpers to request/release memory and I/O regions Add helpers to request and release a device's memory or I/O regions. With these helpers in place, one does not need to select a device's memory or I/O regions with pci_select_bars() prior to requesting or releasing them. Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig --- include/linux/pci.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/include/linux/pci.h b/include/linux/pci.h index 9c201d4dbd51..6af3b93f0710 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1402,6 +1402,34 @@ typedef int (*arch_set_vga_state_t)(struct pci_dev *pdev, bool decode, unsigned int command_bits, u32 flags); void pci_register_set_vga_state(arch_set_vga_state_t func); +static inline int +pci_request_io_regions(struct pci_dev *pdev, const char *name) +{ + return pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_IO), name); +} + +static inline void +pci_release_io_regions(struct pci_dev *pdev) +{ + return pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_IO)); +} + +static inline int +pci_request_mem_regions(struct pci_dev *pdev, const char *name) +{ + return pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), name); +} + +static inline void +pci_release_mem_regions(struct pci_dev *pdev) +{ + return pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +} + #else /* CONFIG_PCI is not enabled */ static inline void pci_set_flags(int flags) { } -- cgit v1.2.3-58-ga151 From a1f447b35b7226f9c5f5ebe5697ec691f8dc8257 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:02 +0200 Subject: NVMe: Use pci_(request|release)_mem_regions Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the NVMe driver. Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig CC: Keith Busch CC: Jens Axboe --- drivers/nvme/host/pci.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 78dca3193ca4..7e4d81208da7 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1681,7 +1681,7 @@ static void nvme_dev_unmap(struct nvme_dev *dev) { if (dev->bar) iounmap(dev->bar); - pci_release_regions(to_pci_dev(dev->dev)); + pci_release_mem_regions(to_pci_dev(dev->dev)); } static void nvme_pci_disable(struct nvme_dev *dev) @@ -1909,13 +1909,9 @@ static const struct nvme_ctrl_ops nvme_pci_ctrl_ops = { static int nvme_dev_map(struct nvme_dev *dev) { - int bars; struct pci_dev *pdev = to_pci_dev(dev->dev); - bars = pci_select_bars(pdev, IORESOURCE_MEM); - if (!bars) - return -ENODEV; - if (pci_request_selected_regions(pdev, bars, "nvme")) + if (pci_request_mem_regions(pdev, "nvme")) return -ENODEV; dev->bar = ioremap(pci_resource_start(pdev, 0), 8192); @@ -1924,7 +1920,7 @@ static int nvme_dev_map(struct nvme_dev *dev) return 0; release: - pci_release_regions(pdev); + pci_release_mem_regions(pdev); return -ENODEV; } -- cgit v1.2.3-58-ga151 From e0c0483c22e567f5d105046f745c033f28a2f0b0 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:03 +0200 Subject: lpfc: Use pci_(request|release)_mem_regions Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the lpfc driver. Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Acked-by: Dick Kennedy CC: James Smart CC: James E.J. Bottomley CC: Martin K. Petersen --- drivers/scsi/lpfc/lpfc_init.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index b43f7ac9812c..3a0f3a4ee944 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4775,20 +4775,17 @@ static int lpfc_enable_pci_dev(struct lpfc_hba *phba) { struct pci_dev *pdev; - int bars = 0; /* Obtain PCI device reference */ if (!phba->pcidev) goto out_error; else pdev = phba->pcidev; - /* Select PCI BARs */ - bars = pci_select_bars(pdev, IORESOURCE_MEM); /* Enable PCI device */ if (pci_enable_device_mem(pdev)) goto out_error; /* Request PCI resource for the device */ - if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME)) + if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME)) goto out_disable_device; /* Set up device as PCI master and save state for EEH */ pci_set_master(pdev); @@ -4805,7 +4802,7 @@ out_disable_device: pci_disable_device(pdev); out_error: lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "1401 Failed to enable pci device, bars:x%x\n", bars); + "1401 Failed to enable pci device\n"); return -ENODEV; } @@ -4820,17 +4817,14 @@ static void lpfc_disable_pci_dev(struct lpfc_hba *phba) { struct pci_dev *pdev; - int bars; /* Obtain PCI device reference */ if (!phba->pcidev) return; else pdev = phba->pcidev; - /* Select PCI BARs */ - bars = pci_select_bars(pdev, IORESOURCE_MEM); /* Release PCI resource and disable PCI device */ - pci_release_selected_regions(pdev, bars); + pci_release_mem_regions(pdev); pci_disable_device(pdev); return; @@ -9722,7 +9716,6 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev) struct lpfc_vport **vports; struct lpfc_hba *phba = vport->phba; int i; - int bars = pci_select_bars(pdev, IORESOURCE_MEM); spin_lock_irq(&phba->hbalock); vport->load_flag |= FC_UNLOADING; @@ -9797,7 +9790,7 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev) lpfc_hba_free(phba); - pci_release_selected_regions(pdev, bars); + pci_release_mem_regions(pdev); pci_disable_device(pdev); } -- cgit v1.2.3-58-ga151 From f03774bdcfc91c943f5e762b1f7f7dc06653e02b Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:04 +0200 Subject: GenWQE: Use pci_(request|release)_mem_regions Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the genwqe driver. [bhelgaas: fix build issues] Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig CC: Frank Haverkamp CC: Greg Kroah-Hartman --- drivers/misc/genwqe/card_base.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 4cf8f82cfca2..a70b853fa2c9 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -182,7 +182,7 @@ static void genwqe_dev_free(struct genwqe_dev *cd) */ static int genwqe_bus_reset(struct genwqe_dev *cd) { - int bars, rc = 0; + int rc = 0; struct pci_dev *pci_dev = cd->pci_dev; void __iomem *mmio; @@ -193,8 +193,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd) cd->mmio = NULL; pci_iounmap(pci_dev, mmio); - bars = pci_select_bars(pci_dev, IORESOURCE_MEM); - pci_release_selected_regions(pci_dev, bars); + pci_release_mem_regions(pci_dev); /* * Firmware/BIOS might change memory mapping during bus reset. @@ -218,7 +217,7 @@ static int genwqe_bus_reset(struct genwqe_dev *cd) GENWQE_INJECT_GFIR_FATAL | GENWQE_INJECT_GFIR_INFO); - rc = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name); + rc = pci_request_mem_regions(pci_dev, genwqe_driver_name); if (rc) { dev_err(&pci_dev->dev, "[%s] err: request bars failed (%d)\n", __func__, rc); @@ -1068,10 +1067,9 @@ static int genwqe_health_check_stop(struct genwqe_dev *cd) */ static int genwqe_pci_setup(struct genwqe_dev *cd) { - int err, bars; + int err; struct pci_dev *pci_dev = cd->pci_dev; - bars = pci_select_bars(pci_dev, IORESOURCE_MEM); err = pci_enable_device_mem(pci_dev); if (err) { dev_err(&pci_dev->dev, @@ -1080,7 +1078,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) } /* Reserve PCI I/O and memory resources */ - err = pci_request_selected_regions(pci_dev, bars, genwqe_driver_name); + err = pci_request_mem_regions(pci_dev, genwqe_driver_name); if (err) { dev_err(&pci_dev->dev, "[%s] err: request bars failed (%d)\n", __func__, err); @@ -1142,7 +1140,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) out_iounmap: pci_iounmap(pci_dev, cd->mmio); out_release_resources: - pci_release_selected_regions(pci_dev, bars); + pci_release_mem_regions(pci_dev); err_disable_device: pci_disable_device(pci_dev); err_out: @@ -1154,14 +1152,12 @@ static int genwqe_pci_setup(struct genwqe_dev *cd) */ static void genwqe_pci_remove(struct genwqe_dev *cd) { - int bars; struct pci_dev *pci_dev = cd->pci_dev; if (cd->mmio) pci_iounmap(pci_dev, cd->mmio); - bars = pci_select_bars(pci_dev, IORESOURCE_MEM); - pci_release_selected_regions(pci_dev, bars); + pci_release_mem_regions(pci_dev); pci_disable_device(pci_dev); } -- cgit v1.2.3-58-ga151 From 56d766d64ca5c9c18abae3c69667edb59459ef55 Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:05 +0200 Subject: ethernet/intel: Use pci_(request|release)_mem_regions Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the Intel ethernet drivers. Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig Acked-by: Jeff Kirsher CC: David S. Miller --- drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++---- drivers/net/ethernet/intel/fm10k/fm10k_pci.c | 11 +++-------- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++------ drivers/net/ethernet/intel/igb/igb_main.c | 10 +++------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 +++------ 5 files changed, 14 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 75e60897b7e7..a2dfa2fbedd8 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -7321,8 +7321,7 @@ err_flashmap: err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -7389,8 +7388,7 @@ static void e1000_remove(struct pci_dev *pdev) if ((adapter->hw.flash_address) && (adapter->hw.mac.type < e1000_pch_spt)) iounmap(adapter->hw.flash_address); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); free_netdev(netdev); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index e05aca9bef0e..a5bccc801177 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -1869,10 +1869,7 @@ static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_dma; } - err = pci_request_selected_regions(pdev, - pci_select_bars(pdev, - IORESOURCE_MEM), - fm10k_driver_name); + err = pci_request_mem_regions(pdev, fm10k_driver_name); if (err) { dev_err(&pdev->dev, "pci_request_selected_regions failed: %d\n", err); @@ -1976,8 +1973,7 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_netdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -2025,8 +2021,7 @@ static void fm10k_remove(struct pci_dev *pdev) free_netdev(netdev); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); pci_disable_pcie_error_reporting(pdev); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5ea22008d721..2e10d2341a29 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -10769,8 +10769,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } /* set up pci connections */ - err = pci_request_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM), i40e_driver_name); + err = pci_request_mem_regions(pdev, i40e_driver_name); if (err) { dev_info(&pdev->dev, "pci_request_selected_regions failed %d\n", err); @@ -11267,8 +11266,7 @@ err_ioremap: kfree(pf); err_pf_alloc: pci_disable_pcie_error_reporting(pdev); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -11379,8 +11377,7 @@ static void i40e_remove(struct pci_dev *pdev) iounmap(hw->hw_addr); kfree(pf); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ef3d642f5ff2..1c96fe83000a 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2323,9 +2323,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } } - err = pci_request_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); + err = pci_request_mem_regions(pdev, igb_driver_name); if (err) goto err_pci_reg; @@ -2749,8 +2747,7 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -2915,8 +2912,7 @@ static void igb_remove(struct pci_dev *pdev) pci_iounmap(pdev, adapter->io_addr); if (hw->flash_address) iounmap(hw->flash_address); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); kfree(adapter->shadow_vfta); free_netdev(netdev); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 088c47cf27d9..162946838772 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -9331,8 +9331,7 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_using_dac = 0; } - err = pci_request_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM), ixgbe_driver_name); + err = pci_request_mem_regions(pdev, ixgbe_driver_name); if (err) { dev_err(&pdev->dev, "pci_request_selected_regions failed 0x%x\n", err); @@ -9718,8 +9717,7 @@ err_ioremap: disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); err_pci_reg: err_dma: if (!adapter || disable_dev) @@ -9786,8 +9784,7 @@ static void ixgbe_remove(struct pci_dev *pdev) #endif iounmap(adapter->io_addr); - pci_release_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM)); + pci_release_mem_regions(pdev); e_dev_info("complete\n"); -- cgit v1.2.3-58-ga151 From caa8e9323e5a4d012c8bd16bc9ef2a444af8243a Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Tue, 7 Jun 2016 09:44:06 +0200 Subject: alx: Use pci_(request|release)_mem_regions Now that we do have pci_request_mem_regions() and pci_release_mem_regions() at hand, use it in the ethernet drivers. Suggested-by: Christoph Hellwig Signed-off-by: Johannes Thumshirn Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig CC: Jay Cliburn CC: Chris Snook CC: David S. Miller --- drivers/net/ethernet/atheros/alx/main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index c98acdc0d14f..ec157a0c5d2a 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1284,7 +1284,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) struct alx_priv *alx; struct alx_hw *hw; bool phy_configured; - int bars, err; + int err; err = pci_enable_device_mem(pdev); if (err) @@ -1304,11 +1304,10 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } } - bars = pci_select_bars(pdev, IORESOURCE_MEM); - err = pci_request_selected_regions(pdev, bars, alx_drv_name); + err = pci_request_mem_regions(pdev, alx_drv_name); if (err) { dev_err(&pdev->dev, - "pci_request_selected_regions failed(bars:%d)\n", bars); + "pci_request_mem_regions failed\n"); goto out_pci_disable; } @@ -1434,7 +1433,7 @@ out_unmap: out_free_netdev: free_netdev(netdev); out_pci_release: - pci_release_selected_regions(pdev, bars); + pci_release_mem_regions(pdev); out_pci_disable: pci_disable_device(pdev); return err; @@ -1453,8 +1452,7 @@ static void alx_remove(struct pci_dev *pdev) unregister_netdev(alx->dev); iounmap(hw->hw_addr); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); + pci_release_mem_regions(pdev); pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); -- cgit v1.2.3-58-ga151 From 765bf9b739731b925ca26a8f05765b87f2bd9724 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 8 Jun 2016 12:04:47 +0100 Subject: PCI: Add generic pci_bus_claim_resources() All PCI resources (bridge windows and BARs) should be inserted in the iomem_resource and ioport_resource trees so we know what space is occupied and what is available for other devices. There's nothing arch-specific about this, but it is currently done by arch-specific code. Add a generic pci_bus_claim_resources() interface so we can migrate away from the arch-specific code. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas CC: Arnd Bergmann CC: Yinghai Lu --- drivers/pci/setup-bus.c | 68 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 1 + 2 files changed, 69 insertions(+) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 55641a39a3e9..1d1a2c952c35 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1423,6 +1423,74 @@ void pci_bus_assign_resources(const struct pci_bus *bus) } EXPORT_SYMBOL(pci_bus_assign_resources); +static void pci_claim_device_resources(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (!r->flags || r->parent) + continue; + + pci_claim_resource(dev, i); + } +} + +static void pci_claim_bridge_resources(struct pci_dev *dev) +{ + int i; + + for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (!r->flags || r->parent) + continue; + + pci_claim_bridge_resource(dev, i); + } +} + +static void pci_bus_allocate_dev_resources(struct pci_bus *b) +{ + struct pci_dev *dev; + struct pci_bus *child; + + list_for_each_entry(dev, &b->devices, bus_list) { + pci_claim_device_resources(dev); + + child = dev->subordinate; + if (child) + pci_bus_allocate_dev_resources(child); + } +} + +static void pci_bus_allocate_resources(struct pci_bus *b) +{ + struct pci_bus *child; + + /* + * Carry out a depth-first search on the PCI bus + * tree to allocate bridge apertures. Read the + * programmed bridge bases and recursively claim + * the respective bridge resources. + */ + if (b->self) { + pci_read_bridge_bases(b); + pci_claim_bridge_resources(b->self); + } + + list_for_each_entry(child, &b->children, node) + pci_bus_allocate_resources(child); +} + +void pci_bus_claim_resources(struct pci_bus *b) +{ + pci_bus_allocate_resources(b); + pci_bus_allocate_dev_resources(b); +} +EXPORT_SYMBOL(pci_bus_claim_resources); + static void __pci_bridge_assign_resources(const struct pci_dev *bridge, struct list_head *add_head, struct list_head *fail_head) diff --git a/include/linux/pci.h b/include/linux/pci.h index 6af3b93f0710..d6cfecfee864 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1114,6 +1114,7 @@ int pci_set_vpd_size(struct pci_dev *dev, size_t len); /* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */ resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx); void pci_bus_assign_resources(const struct pci_bus *bus); +void pci_bus_claim_resources(struct pci_bus *bus); void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); int pci_claim_bridge_resource(struct pci_dev *bridge, int i); -- cgit v1.2.3-58-ga151 From dcce0f153b63412291db4c5c5f714404a6e4f7a1 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 8 Jun 2016 12:04:48 +0100 Subject: PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups We claim PCI BAR and bridge window resources in pci_bus_assign_resources(), but when PCI_PROBE_ONLY is set, we treat those resources as immutable and don't call pci_bus_assign_resources(), so the resources aren't put in the resource tree. When the resources aren't in the tree, they don't show up in /proc/iomem, we can't detect conflicts, and we need special cases elsewhere for PCI_PROBE_ONLY or resources without a parent pointer. Claim all PCI BAR and window resources in the PCI_PROBE_ONLY case. If a PCI_PROBE_ONLY platform assigns conflicting resources, Linux can't fix the conflicts. Previously we didn't notice the conflicts, but now we will, which may expose new failures. [bhelgaas: changelog, summarize comment] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Will Deacon CC: Arnd Bergmann CC: David Daney --- drivers/pci/host/pci-host-common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/pci/host/pci-host-common.c b/drivers/pci/host/pci-host-common.c index 8cba7ab73df9..c95d45dc5699 100644 --- a/drivers/pci/host/pci-host-common.c +++ b/drivers/pci/host/pci-host-common.c @@ -155,7 +155,14 @@ int pci_host_common_probe(struct platform_device *pdev, pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); - if (!pci_has_flag(PCI_PROBE_ONLY)) { + /* + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). + */ + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); -- cgit v1.2.3-58-ga151 From b30742aa307ac9d7db846c0823685e064dc66aaf Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Thu, 23 Jun 2016 11:36:22 +0100 Subject: ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups We claim PCI BAR and bridge window resources in pci_bus_assign_resources(), but when PCI_PROBE_ONLY is set, we treat those resources as immutable and don't call pci_bus_assign_resources(), so the resources aren't put in the resource tree. When the resources aren't in the tree, they don't show up in /proc/iomem, we can't detect conflicts, and we need special cases elsewhere for PCI_PROBE_ONLY or resources without a parent pointer. Claim all PCI BAR and window resources in the PCI_PROBE_ONLY case. If a PCI_PROBE_ONLY platform assigns conflicting resources, Linux can't fix the conflicts. Previously we didn't notice the conflicts, but now we will, which may expose new failures. [bhelgaas: changelog, add resource comment, remove size/assign comments] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas CC: Russell King --- arch/arm/kernel/bios32.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 05e61a2eeabe..ad4710e9da3e 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -515,25 +515,23 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) list_for_each_entry(sys, &head, node) { struct pci_bus *bus = sys->bus; - if (!pci_has_flag(PCI_PROBE_ONLY)) { + /* + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). + */ + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { struct pci_bus *child; - /* - * Size the bridge windows. - */ pci_bus_size_bridges(bus); - - /* - * Assign resources. - */ pci_bus_assign_resources(bus); list_for_each_entry(child, &bus->children, node) pcie_bus_configure_settings(child); } - /* - * Tell drivers about devices found. - */ + pci_bus_add_devices(bus); } } -- cgit v1.2.3-58-ga151 From 046136170a56ba47338fbd10fdf4db4214b30567 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Jun 2016 16:32:20 -0500 Subject: MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups We claim PCI BAR and bridge window resources in pci_bus_assign_resources(), but when PCI_PROBE_ONLY is set, we treat those resources as immutable and don't call pci_bus_assign_resources(), so the resources aren't put in the resource tree. When the resources aren't in the tree, they don't show up in /proc/iomem, we can't detect conflicts, and we need special cases elsewhere for PCI_PROBE_ONLY or resources without a parent pointer. Claim all PCI BAR and window resources in the PCI_PROBE_ONLY case. If a PCI_PROBE_ONLY platform assigns conflicting resources, Linux can't fix the conflicts. Previously we didn't notice the conflicts, but now we will, which may expose new failures. Signed-off-by: Bjorn Helgaas --- arch/mips/pci/pci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 5717384a986d..b4c02f29663e 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -112,7 +112,14 @@ static void pcibios_scanbus(struct pci_controller *hose) need_domain_info = 1; } - if (!pci_has_flag(PCI_PROBE_ONLY)) { + /* + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). + */ + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { pci_bus_size_bridges(bus); pci_bus_assign_resources(bus); } -- cgit v1.2.3-58-ga151 From f615bca4ccb9a91b33f0d378503b070fad97e181 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 8 Jun 2016 12:04:49 +0100 Subject: ARM64/PCI: Remove arch-specific pcibios_enable_device() On systems with PCI_PROBE_ONLY set, we rely on BAR assignments from firmware. Previously we did not insert those resources into the resource tree, so we had to skip pci_enable_resources() because it fails if resources are not in the resource tree. Now that we *do* insert resources even when PCI_PROBE_ONLY is set, we no longer need the ARM64-specific pcibios_enable_device(). Remove it so we use the generic version. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Will Deacon CC: Arnd Bergmann CC: Catalin Marinas --- arch/arm64/kernel/pci.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c index 3c4e308b40a0..39cfa032ffa7 100644 --- a/arch/arm64/kernel/pci.c +++ b/arch/arm64/kernel/pci.c @@ -36,19 +36,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, return res->start; } -/** - * pcibios_enable_device - Enable I/O and memory. - * @dev: PCI device to be enabled - * @mask: bitmask of BARs to enable - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - if (pci_has_flag(PCI_PROBE_ONLY)) - return 0; - - return pci_enable_resources(dev, mask); -} - /* * Try to assign the IRQ number from DT when adding a new device */ -- cgit v1.2.3-58-ga151 From 313cb90285d8715302d79069700d78770ee91e9a Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Wed, 8 Jun 2016 12:04:50 +0100 Subject: ARM/PCI: Remove arch-specific pcibios_enable_device() On systems with PCI_PROBE_ONLY set, we rely on BAR assignments from firmware. Previously we did not insert those resources into the resource tree, so we had to skip pci_enable_resources() because it fails if resources are not in the resource tree. Now that we *do* insert resources even when PCI_PROBE_ONLY is set, we no longer need the ARM-specific pcibios_enable_device(). Remove it so we use the generic version. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Will Deacon CC: Arnd Bergmann CC: Russell King --- arch/arm/kernel/bios32.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ad4710e9da3e..af8e4668fbf9 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -588,18 +588,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, return start; } -/** - * pcibios_enable_device - Enable I/O and memory. - * @dev: PCI device to be enabled - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - if (pci_has_flag(PCI_PROBE_ONLY)) - return 0; - - return pci_enable_resources(dev, mask); -} - int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { -- cgit v1.2.3-58-ga151 From ab2b750cad0276cebbb9f765ca5652bd35dcb7af Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 23 Jun 2016 11:33:24 -0500 Subject: unicore32/PCI: Remove pci=firmware command line parameter handling Remove support for the "pci=firmware" command line parameter, which was way to keep the kernel from changing any PCI BAR assignments. This was copied from ARM, but is not actually needed on unicore32. The corresponding ARM support was removed by 903589ca7165 ("ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling"). Signed-off-by: Bjorn Helgaas --- arch/unicore32/kernel/pci.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c index d45fa5f3e9c4..62137d13c6f9 100644 --- a/arch/unicore32/kernel/pci.c +++ b/arch/unicore32/kernel/pci.c @@ -265,10 +265,8 @@ static int __init pci_common_init(void) pci_fixup_irqs(pci_common_swizzle, pci_puv3_map_irq); - if (!pci_has_flag(PCI_PROBE_ONLY)) { - pci_bus_size_bridges(puv3_bus); - pci_bus_assign_resources(puv3_bus); - } + pci_bus_size_bridges(puv3_bus); + pci_bus_assign_resources(puv3_bus); pci_bus_add_devices(puv3_bus); return 0; } @@ -279,9 +277,6 @@ char * __init pcibios_setup(char *str) if (!strcmp(str, "debug")) { debug_pci = 1; return NULL; - } else if (!strcmp(str, "firmware")) { - pci_add_flags(PCI_PROBE_ONLY); - return NULL; } return str; } -- cgit v1.2.3-58-ga151