From a500f3bd787f8224341e44b238f318c407b10897 Mon Sep 17 00:00:00 2001 From: Eugen Hristev Date: Tue, 28 Jan 2020 12:57:39 +0000 Subject: iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode The differential channels require writing the channel offset register (COR). Otherwise they do not work in differential mode. The configuration of COR is missing in triggered mode. Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Eugen Hristev Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/at91-sama5d2_adc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c index a5c7771227d5..9d96f7d08b95 100644 --- a/drivers/iio/adc/at91-sama5d2_adc.c +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -723,6 +723,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) { struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit); + u32 cor; if (!chan) continue; @@ -731,6 +732,20 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) chan->type == IIO_PRESSURE) continue; + if (state) { + cor = at91_adc_readl(st, AT91_SAMA5D2_COR); + + if (chan->differential) + cor |= (BIT(chan->channel) | + BIT(chan->channel2)) << + AT91_SAMA5D2_COR_DIFF_OFFSET; + else + cor &= ~(BIT(chan->channel) << + AT91_SAMA5D2_COR_DIFF_OFFSET); + + at91_adc_writel(st, AT91_SAMA5D2_COR, cor); + } + if (state) { at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); -- cgit v1.2.3-58-ga151 From e19ac9d9a978f8238a85a28ed624094a497d5ae6 Mon Sep 17 00:00:00 2001 From: Olivier Moysan Date: Tue, 21 Jan 2020 12:02:56 +0100 Subject: iio: adc: stm32-dfsdm: fix sleep in atomic context This commit fixes the error message: "BUG: sleeping function called from invalid context at kernel/irq/chip.c" Suppress the trigger irq handler. Make the buffer transfers directly in DMA callback, instead. Push buffers without timestamps, as timestamps are not supported in DFSDM driver. Fixes: 11646e81d775 ("iio: adc: stm32-dfsdm: add support for buffer modes") Signed-off-by: Olivier Moysan Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/stm32-dfsdm-adc.c | 43 +++++++++------------------------------ 1 file changed, 10 insertions(+), 33 deletions(-) diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 2aad2cda6943..76a60d93fe23 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -842,31 +842,6 @@ static inline void stm32_dfsdm_process_data(struct stm32_dfsdm_adc *adc, } } -static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p) -{ - struct iio_poll_func *pf = p; - struct iio_dev *indio_dev = pf->indio_dev; - struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); - int available = stm32_dfsdm_adc_dma_residue(adc); - - while (available >= indio_dev->scan_bytes) { - s32 *buffer = (s32 *)&adc->rx_buf[adc->bufi]; - - stm32_dfsdm_process_data(adc, buffer); - - iio_push_to_buffers_with_timestamp(indio_dev, buffer, - pf->timestamp); - available -= indio_dev->scan_bytes; - adc->bufi += indio_dev->scan_bytes; - if (adc->bufi >= adc->buf_sz) - adc->bufi = 0; - } - - iio_trigger_notify_done(indio_dev->trig); - - return IRQ_HANDLED; -} - static void stm32_dfsdm_dma_buffer_done(void *data) { struct iio_dev *indio_dev = data; @@ -874,11 +849,6 @@ static void stm32_dfsdm_dma_buffer_done(void *data) int available = stm32_dfsdm_adc_dma_residue(adc); size_t old_pos; - if (indio_dev->currentmode & INDIO_BUFFER_TRIGGERED) { - iio_trigger_poll_chained(indio_dev->trig); - return; - } - /* * FIXME: In Kernel interface does not support cyclic DMA buffer,and * offers only an interface to push data samples per samples. @@ -906,7 +876,15 @@ static void stm32_dfsdm_dma_buffer_done(void *data) adc->bufi = 0; old_pos = 0; } - /* regular iio buffer without trigger */ + /* + * In DMA mode the trigger services of IIO are not used + * (e.g. no call to iio_trigger_poll). + * Calling irq handler associated to the hardware trigger is not + * relevant as the conversions have already been done. Data + * transfers are performed directly in DMA callback instead. + * This implementation avoids to call trigger irq handler that + * may sleep, in an atomic context (DMA irq handler context). + */ if (adc->dev_data->type == DFSDM_IIO) iio_push_to_buffers(indio_dev, buffer); } @@ -1536,8 +1514,7 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev) } ret = iio_triggered_buffer_setup(indio_dev, - &iio_pollfunc_store_time, - &stm32_dfsdm_adc_trigger_handler, + &iio_pollfunc_store_time, NULL, &stm32_dfsdm_buffer_setup_ops); if (ret) { stm32_dfsdm_dma_release(indio_dev); -- cgit v1.2.3-58-ga151 From 29e8c8253d7d5265f58122c0a7902e26df6c6f61 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Fri, 14 Feb 2020 17:46:35 +0100 Subject: iio: trigger: stm32-timer: disable master mode when stopping Master mode should be disabled when stopping. This mainly impacts possible other use-case after timer has been stopped. Currently, master mode remains set (from start routine). Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/trigger/stm32-timer-trigger.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c index 2e0d32aa8436..2f82e8c32186 100644 --- a/drivers/iio/trigger/stm32-timer-trigger.c +++ b/drivers/iio/trigger/stm32-timer-trigger.c @@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm32_timer_trigger *priv, return 0; } -static void stm32_timer_stop(struct stm32_timer_trigger *priv) +static void stm32_timer_stop(struct stm32_timer_trigger *priv, + struct iio_trigger *trig) { u32 ccer, cr1; @@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv) regmap_write(priv->regmap, TIM_PSC, 0); regmap_write(priv->regmap, TIM_ARR, 0); + /* Force disable master mode */ + if (stm32_timer_is_trgo2_name(trig->name)) + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0); + else + regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0); + /* Make sure that registers are updated */ regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); } @@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(struct device *dev, return ret; if (freq == 0) { - stm32_timer_stop(priv); + stm32_timer_stop(priv, trig); } else { ret = stm32_timer_start(priv, trig, freq); if (ret) -- cgit v1.2.3-58-ga151 From b500c086e4110829a308c23e83a7cdc65b26228a Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 14 Feb 2020 12:03:24 +0100 Subject: iio: magnetometer: ak8974: Fix negative raw values in sysfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At the moment, reading from in_magn_*_raw in sysfs tends to return large values around 65000, even though the output of ak8974 is actually limited to ±32768. This happens because the value is never converted to the signed 16-bit integer variant. Add an explicit cast to s16 to fix this. Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974") Signed-off-by: Stephan Gerhold Reviewed-by: Linus Waleij Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/magnetometer/ak8974.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c index fc7e910f8e8b..d32996702110 100644 --- a/drivers/iio/magnetometer/ak8974.c +++ b/drivers/iio/magnetometer/ak8974.c @@ -564,7 +564,7 @@ static int ak8974_read_raw(struct iio_dev *indio_dev, * We read all axes and discard all but one, for optimized * reading, use the triggered buffer. */ - *val = le16_to_cpu(hw_values[chan->address]); + *val = (s16)le16_to_cpu(hw_values[chan->address]); ret = IIO_VAL_INT; } -- cgit v1.2.3-58-ga151 From cb2116ff97859d34fda6cb561ac654415f4c6230 Mon Sep 17 00:00:00 2001 From: Alexandru Tachici Date: Wed, 19 Feb 2020 16:31:12 +0200 Subject: iio: accel: adxl372: Set iio_chan BE Data stored in the iio-buffer is BE and this should be specified in the iio_chan_spec struct. Fixes: f4f55ce38e5f8 ("iio:adxl372: Add FIFO and interrupts support") Signed-off-by: Alexandru Tachici Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/adxl372.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c index 67b8817995c0..60daf04ce188 100644 --- a/drivers/iio/accel/adxl372.c +++ b/drivers/iio/accel/adxl372.c @@ -237,6 +237,7 @@ static const struct adxl372_axis_lookup adxl372_axis_lookup_table[] = { .realbits = 12, \ .storagebits = 16, \ .shift = 4, \ + .endianness = IIO_BE, \ }, \ } -- cgit v1.2.3-58-ga151 From b42aa97ed5f1169cfd37175ef388ea62ff2dcf43 Mon Sep 17 00:00:00 2001 From: Tomas Novotny Date: Tue, 18 Feb 2020 16:44:50 +0100 Subject: iio: light: vcnl4000: update sampling periods for vcnl4200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. This explains the drift seen during experiments. The proximity pulse width is also changed from 32us to 30us. According to the support, the tolerance also applies to ambient light. So update the sampling periods. As the reading is blocking, current users may notice slightly longer response time. Fixes: be38866fbb97 ("iio: vcnl4000: add support for VCNL4200") Reviewed-by: Guido Günther Signed-off-by: Tomas Novotny Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/vcnl4000.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index b0e241aaefb4..98428bf430bd 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -167,10 +167,10 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->vcnl4200_ps.reg = VCNL4200_PS_DATA; switch (id) { case VCNL4200_PROD_ID: - /* Integration time is 50ms, but the experiments */ - /* show 54ms in total. */ - data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000); - data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000); + /* Default wait time is 50ms, add 20% tolerance. */ + data->vcnl4200_al.sampling_rate = ktime_set(0, 60000 * 1000); + /* Default wait time is 4.8ms, add 20% tolerance. */ + data->vcnl4200_ps.sampling_rate = ktime_set(0, 5760 * 1000); data->al_scale = 24000; break; case VCNL4040_PROD_ID: -- cgit v1.2.3-58-ga151 From 2ca5a8792d617b4035aacd0a8be527f667fbf912 Mon Sep 17 00:00:00 2001 From: Tomas Novotny Date: Tue, 18 Feb 2020 16:44:51 +0100 Subject: iio: light: vcnl4000: update sampling periods for vcnl4040 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Vishay has published a new version of "Designing the VCNL4200 Into an Application" application note in October 2019. The new version specifies that there is +-20% of part to part tolerance. Although the application note is related to vcnl4200, according to support the vcnl4040's "ASIC is quite similar to that one for the VCNL4200". So update the sampling periods (and comment), including the correct sampling period for proximity. Both sampling periods are lower. Users relying on the blocking behaviour of reading will get proximity measurements much earlier. Fixes: 5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor") Reviewed-by: Guido Günther Tested-by: Guido Günther Signed-off-by: Tomas Novotny Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/light/vcnl4000.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c index 98428bf430bd..e5b00a6611ac 100644 --- a/drivers/iio/light/vcnl4000.c +++ b/drivers/iio/light/vcnl4000.c @@ -174,9 +174,10 @@ static int vcnl4200_init(struct vcnl4000_data *data) data->al_scale = 24000; break; case VCNL4040_PROD_ID: - /* Integration time is 80ms, add 10ms. */ - data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000); - data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000); + /* Default wait time is 80ms, add 20% tolerance. */ + data->vcnl4200_al.sampling_rate = ktime_set(0, 96000 * 1000); + /* Default wait time is 5ms, add 20% tolerance. */ + data->vcnl4200_ps.sampling_rate = ktime_set(0, 6000 * 1000); data->al_scale = 120000; break; } -- cgit v1.2.3-58-ga151 From e43d110cdc206b6df4dd438cd10c81d1da910aad Mon Sep 17 00:00:00 2001 From: Wen-chien Jesse Sung Date: Mon, 24 Feb 2020 17:54:26 +0800 Subject: iio: st_sensors: remap SMO8840 to LIS2DH12 According to ST, the HID is for LIS2DH12. Fixes: 3d56e19815b3 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id") Signed-off-by: Wen-chien Jesse Sung Tested-by: Hans de Goede Reviewed-by: Hans de Goede Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index 633955d764cc..849cf74153c4 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -110,7 +110,7 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id st_accel_acpi_match[] = { - {"SMO8840", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME}, + {"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME}, {"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME}, { }, }; -- cgit v1.2.3-58-ga151 From 016a8845f6da65b2203f102f192046fbb624e250 Mon Sep 17 00:00:00 2001 From: Petr Štetiar Date: Thu, 27 Feb 2020 17:27:34 +0100 Subject: iio: chemical: sps30: fix missing triggered buffer dependency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SPS30 uses triggered buffer, but the dependency is not specified in the Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER config symbols. Cc: stable@vger.kernel.org Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor") Signed-off-by: Petr Štetiar Signed-off-by: Jonathan Cameron --- drivers/iio/chemical/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index 0b91de4df8f4..a7e65a59bf42 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -91,6 +91,8 @@ config SPS30 tristate "SPS30 particulate matter sensor" depends on I2C select CRC8 + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say Y here to build support for the Sensirion SPS30 particulate matter sensor. -- cgit v1.2.3-58-ga151 From 10856d88f7653b42196ca5b2775bbc1f15122a58 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 4 Mar 2020 19:34:23 +0800 Subject: iio: ping: set pa_laser_ping_cfg in of_ping_match pa_laser_ping_cfg should be set in of_ping_match instead of pa_ping_cfg. Fixes: 7bb501f49ddb ("iio: ping: add parallax ping sensors") Signed-off-by: YueHaibing Acked-by: Andreas Klinger Signed-off-by: Jonathan Cameron --- drivers/iio/proximity/ping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/proximity/ping.c b/drivers/iio/proximity/ping.c index 34aff108dff5..12b893c5b0ee 100644 --- a/drivers/iio/proximity/ping.c +++ b/drivers/iio/proximity/ping.c @@ -269,7 +269,7 @@ static const struct iio_chan_spec ping_chan_spec[] = { static const struct of_device_id of_ping_match[] = { { .compatible = "parallax,ping", .data = &pa_ping_cfg}, - { .compatible = "parallax,laserping", .data = &pa_ping_cfg}, + { .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg}, {}, }; -- cgit v1.2.3-58-ga151 From 9d32c0cde4e2d1343dfb88a67b2ec6397705b32b Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 6 Mar 2020 01:30:47 +0100 Subject: staging/speakup: fix get_word non-space look-ahead get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1 Reported-by: Kirk Reiser Reported-by: Janina Sajka Reported-by: Alexandr Epaneshnikov Reported-by: Gregory Nowak Reported-by: deedra waters Signed-off-by: Samuel Thibault Tested-by: Alexandr Epaneshnikov Tested-by: Gregory Nowak Tested-by: Michael Taboada Cc: stable Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c index 488f2539aa9a..81ecfd1a200d 100644 --- a/drivers/staging/speakup/main.c +++ b/drivers/staging/speakup/main.c @@ -561,7 +561,7 @@ static u_long get_word(struct vc_data *vc) return 0; } else if (tmpx < vc->vc_cols - 2 && (ch == SPACE || ch == 0 || (ch < 0x100 && IS_WDLM(ch))) && - get_char(vc, (u_short *)&tmp_pos + 1, &temp) > SPACE) { + get_char(vc, (u_short *)tmp_pos + 1, &temp) > SPACE) { tmp_pos += 2; tmpx++; } else { -- cgit v1.2.3-58-ga151 From bab0a0b03442a62fe3abefcb2169e0b9ff95990c Mon Sep 17 00:00:00 2001 From: Jérôme Pouiller Date: Tue, 10 Mar 2020 11:13:52 +0100 Subject: staging: wfx: fix warning about freeing in-use mutex during device unregister MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After hif_shutdown(), communication with the chip is no more possible. It the only request that never reply. Therefore, hif_cmd.lock is never unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential warning during disposal of device. hif_cmd.key_renew_lock should also been unlocked for the same reason. Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200310101356.182818-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/hif_tx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/wfx/hif_tx.c b/drivers/staging/wfx/hif_tx.c index 2428363371fa..7b732c531a74 100644 --- a/drivers/staging/wfx/hif_tx.c +++ b/drivers/staging/wfx/hif_tx.c @@ -140,6 +140,7 @@ int hif_shutdown(struct wfx_dev *wdev) else control_reg_write(wdev, 0); mutex_unlock(&wdev->hif_cmd.lock); + mutex_unlock(&wdev->hif_cmd.key_renew_lock); kfree(hif); return ret; } -- cgit v1.2.3-58-ga151 From c918c27ac6f0252aaa2374cdaa0426df4d5df9df Mon Sep 17 00:00:00 2001 From: Jérôme Pouiller Date: Tue, 10 Mar 2020 11:13:53 +0100 Subject: staging: wfx: fix lines ending with a comma instead of a semicolon MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Obviously introduced by mistake. Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage") Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200310101356.182818-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/hif_tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/wfx/hif_tx.c b/drivers/staging/wfx/hif_tx.c index 7b732c531a74..7a56e45bcdaa 100644 --- a/drivers/staging/wfx/hif_tx.c +++ b/drivers/staging/wfx/hif_tx.c @@ -428,9 +428,9 @@ int hif_start(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf, struct hif_msg *hif; struct hif_req_start *body = wfx_alloc_hif(sizeof(*body), &hif); - body->dtim_period = conf->dtim_period, - body->short_preamble = conf->use_short_preamble, - body->channel_number = cpu_to_le16(channel->hw_value), + body->dtim_period = conf->dtim_period; + body->short_preamble = conf->use_short_preamble; + body->channel_number = cpu_to_le16(channel->hw_value); body->beacon_interval = cpu_to_le32(conf->beacon_int); body->basic_rate_set = cpu_to_le32(wfx_rate_mask_to_hw(wvif->wdev, conf->basic_rates)); -- cgit v1.2.3-58-ga151 From 4bbc6a3e7ad0d0f31ae3ba9858dbca45eb7a848e Mon Sep 17 00:00:00 2001 From: Jérôme Pouiller Date: Tue, 10 Mar 2020 11:13:54 +0100 Subject: staging: wfx: make warning about pending frame less scary MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Removing station while some traffic is in progress may happen. Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200310101356.182818-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/sta.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c index 03d0f224ffdb..010e13bcd33e 100644 --- a/drivers/staging/wfx/sta.c +++ b/drivers/staging/wfx/sta.c @@ -605,7 +605,9 @@ int wfx_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int i; for (i = 0; i < ARRAY_SIZE(sta_priv->buffered); i++) - WARN(sta_priv->buffered[i], "release station while Tx is in progress"); + if (sta_priv->buffered[i]) + dev_warn(wvif->wdev->dev, "release station while %d pending frame on queue %d", + sta_priv->buffered[i], i); // FIXME: see note in wfx_sta_add() if (vif->type == NL80211_IFTYPE_STATION) return 0; -- cgit v1.2.3-58-ga151 From 046cc2effd1312a23b9e3d8363be7c68f6e91f3c Mon Sep 17 00:00:00 2001 From: Jérôme Pouiller Date: Tue, 10 Mar 2020 11:13:55 +0100 Subject: staging: wfx: fix RCU usage in wfx_join_finalize() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Access to sta->ht_cap is protected by RCU. However, hif_set_association_mode() may sleep, so it can't be called in RCU. This patch fix this behavior by handling sta and its RCU directly from function hif_set_association_mode(). Signed-off-by: Jérôme Pouiller Fixes: d00149011066 ("staging: wfx: fix RCU usage") Link: https://lore.kernel.org/r/20200310101356.182818-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/hif_tx_mib.h | 15 ++++++++++----- drivers/staging/wfx/sta.c | 4 ++-- 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/staging/wfx/hif_tx_mib.h b/drivers/staging/wfx/hif_tx_mib.h index bf3769c2a9b6..26b1406f9f6c 100644 --- a/drivers/staging/wfx/hif_tx_mib.h +++ b/drivers/staging/wfx/hif_tx_mib.h @@ -191,10 +191,10 @@ static inline int hif_set_block_ack_policy(struct wfx_vif *wvif, } static inline int hif_set_association_mode(struct wfx_vif *wvif, - struct ieee80211_bss_conf *info, - struct ieee80211_sta_ht_cap *ht_cap) + struct ieee80211_bss_conf *info) { int basic_rates = wfx_rate_mask_to_hw(wvif->wdev, info->basic_rates); + struct ieee80211_sta *sta = NULL; struct hif_mib_set_association_mode val = { .preambtype_use = 1, .mode = 1, @@ -204,12 +204,17 @@ static inline int hif_set_association_mode(struct wfx_vif *wvif, .basic_rate_set = cpu_to_le32(basic_rates) }; + rcu_read_lock(); // protect sta + if (info->bssid && !info->ibss_joined) + sta = ieee80211_find_sta(wvif->vif, info->bssid); + // FIXME: it is strange to not retrieve all information from bss_info - if (ht_cap && ht_cap->ht_supported) { - val.mpdu_start_spacing = ht_cap->ampdu_density; + if (sta && sta->ht_cap.ht_supported) { + val.mpdu_start_spacing = sta->ht_cap.ampdu_density; if (!(info->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT)) - val.greenfield = !!(ht_cap->cap & IEEE80211_HT_CAP_GRN_FLD); + val.greenfield = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD); } + rcu_read_unlock(); return hif_write_mib(wvif->wdev, wvif->id, HIF_MIB_ID_SET_ASSOCIATION_MODE, &val, sizeof(val)); diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c index 010e13bcd33e..ed16475c207c 100644 --- a/drivers/staging/wfx/sta.c +++ b/drivers/staging/wfx/sta.c @@ -691,6 +691,7 @@ static void wfx_join_finalize(struct wfx_vif *wvif, wfx_rate_mask_to_hw(wvif->wdev, sta->supp_rates[wvif->channel->band]); else wvif->bss_params.operational_rate_set = -1; + rcu_read_unlock(); if (sta && info->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT) hif_dual_cts_protection(wvif, true); @@ -703,8 +704,7 @@ static void wfx_join_finalize(struct wfx_vif *wvif, wvif->bss_params.beacon_lost_count = 20; wvif->bss_params.aid = info->aid; - hif_set_association_mode(wvif, info, sta ? &sta->ht_cap : NULL); - rcu_read_unlock(); + hif_set_association_mode(wvif, info); if (!info->ibss_joined) { hif_keep_alive_period(wvif, 30 /* sec */); -- cgit v1.2.3-58-ga151 From ac42c12dd752d315a7027dcb50421dbbd1af53bd Mon Sep 17 00:00:00 2001 From: Jérôme Pouiller Date: Tue, 10 Mar 2020 11:13:56 +0100 Subject: staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Access to result of ieee80211_bss_get_ie() is protected by RCU. In other hand, function hif_join() can sleep and cannot be called with RCU locked. Provide a copy of "ssidie" to hif_join() to solve this behavior. Fixes: 9ced9b593741 ("staging: wfx: simplify hif_join()") Signed-off-by: Jérôme Pouiller Link: https://lore.kernel.org/r/20200310101356.182818-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wfx/hif_tx.c | 8 ++++---- drivers/staging/wfx/hif_tx.h | 2 +- drivers/staging/wfx/sta.c | 17 ++++++++++------- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/staging/wfx/hif_tx.c b/drivers/staging/wfx/hif_tx.c index 7a56e45bcdaa..77bca43aca42 100644 --- a/drivers/staging/wfx/hif_tx.c +++ b/drivers/staging/wfx/hif_tx.c @@ -290,7 +290,7 @@ int hif_stop_scan(struct wfx_vif *wvif) } int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf, - const struct ieee80211_channel *channel, const u8 *ssidie) + struct ieee80211_channel *channel, const u8 *ssid, int ssidlen) { int ret; struct hif_msg *hif; @@ -308,9 +308,9 @@ int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf, body->basic_rate_set = cpu_to_le32(wfx_rate_mask_to_hw(wvif->wdev, conf->basic_rates)); memcpy(body->bssid, conf->bssid, sizeof(body->bssid)); - if (!conf->ibss_joined && ssidie) { - body->ssid_length = cpu_to_le32(ssidie[1]); - memcpy(body->ssid, &ssidie[2], ssidie[1]); + if (!conf->ibss_joined && ssid) { + body->ssid_length = cpu_to_le32(ssidlen); + memcpy(body->ssid, ssid, ssidlen); } wfx_fill_header(hif, wvif->id, HIF_REQ_ID_JOIN, sizeof(*body)); ret = wfx_cmd_send(wvif->wdev, hif, NULL, 0, false); diff --git a/drivers/staging/wfx/hif_tx.h b/drivers/staging/wfx/hif_tx.h index 20977e461718..f8520a14c14c 100644 --- a/drivers/staging/wfx/hif_tx.h +++ b/drivers/staging/wfx/hif_tx.h @@ -46,7 +46,7 @@ int hif_scan(struct wfx_vif *wvif, struct cfg80211_scan_request *req80211, int chan_start, int chan_num); int hif_stop_scan(struct wfx_vif *wvif); int hif_join(struct wfx_vif *wvif, const struct ieee80211_bss_conf *conf, - const struct ieee80211_channel *channel, const u8 *ssidie); + struct ieee80211_channel *channel, const u8 *ssid, int ssidlen); int hif_set_pm(struct wfx_vif *wvif, bool ps, int dynamic_ps_timeout); int hif_set_bss_params(struct wfx_vif *wvif, const struct hif_req_set_bss_params *arg); diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c index ed16475c207c..af4f4bbd0572 100644 --- a/drivers/staging/wfx/sta.c +++ b/drivers/staging/wfx/sta.c @@ -491,9 +491,11 @@ static void wfx_set_mfp(struct wfx_vif *wvif, static void wfx_do_join(struct wfx_vif *wvif) { int ret; - const u8 *ssidie; struct ieee80211_bss_conf *conf = &wvif->vif->bss_conf; struct cfg80211_bss *bss = NULL; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + const u8 *ssidie = NULL; + int ssidlen = 0; wfx_tx_lock_flush(wvif->wdev); @@ -514,11 +516,14 @@ static void wfx_do_join(struct wfx_vif *wvif) if (!wvif->beacon_int) wvif->beacon_int = 1; - rcu_read_lock(); + rcu_read_lock(); // protect ssidie if (!conf->ibss_joined) ssidie = ieee80211_bss_get_ie(bss, WLAN_EID_SSID); - else - ssidie = NULL; + if (ssidie) { + ssidlen = ssidie[1]; + memcpy(ssid, &ssidie[2], ssidie[1]); + } + rcu_read_unlock(); wfx_tx_flush(wvif->wdev); @@ -527,10 +532,8 @@ static void wfx_do_join(struct wfx_vif *wvif) wfx_set_mfp(wvif, bss); - /* Perform actual join */ wvif->wdev->tx_burst_idx = -1; - ret = hif_join(wvif, conf, wvif->channel, ssidie); - rcu_read_unlock(); + ret = hif_join(wvif, conf, wvif->channel, ssid, ssidlen); if (ret) { ieee80211_connection_loss(wvif->vif); wvif->join_complete_status = -1; -- cgit v1.2.3-58-ga151 From 8f3675be4bda33adbdc1dd2ab3b6c76a7599a79e Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Mar 2020 12:01:49 +0100 Subject: staging: greybus: loopback_test: fix poll-mask build breakage A scripted conversion from userland POLL* to kernel EPOLL* constants mistakingly replaced the poll flags in the loopback_test tool, which therefore no longer builds. Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement") Cc: stable # 4.16 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200312110151.22028-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/tools/loopback_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c index ba6f905f26fa..41e1820d9ac9 100644 --- a/drivers/staging/greybus/tools/loopback_test.c +++ b/drivers/staging/greybus/tools/loopback_test.c @@ -655,7 +655,7 @@ static int open_poll_files(struct loopback_test *t) goto err; } read(t->fds[fds_idx].fd, &dummy, 1); - t->fds[fds_idx].events = EPOLLERR|EPOLLPRI; + t->fds[fds_idx].events = POLLERR | POLLPRI; t->fds[fds_idx].revents = 0; fds_idx++; } @@ -748,7 +748,7 @@ static int wait_for_complete(struct loopback_test *t) } for (i = 0; i < t->poll_count; i++) { - if (t->fds[i].revents & EPOLLPRI) { + if (t->fds[i].revents & POLLPRI) { /* Dummy read to clear the event */ read(t->fds[i].fd, &dummy, 1); number_of_events++; -- cgit v1.2.3-58-ga151 From f16023834863932f95dfad13fac3fc47f77d2f29 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Mar 2020 12:01:50 +0100 Subject: staging: greybus: loopback_test: fix potential path truncation Newer GCC warns about a possible truncation of a generated sysfs path name as we're concatenating a directory path with a file name and placing the result in a buffer that is half the size of the maximum length of the directory path (which is user controlled). loopback_test.c: In function 'open_poll_files': loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=] 651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count"); | ^~ loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255 651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count"); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by making sure the buffer is large enough the concatenated strings. Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback") Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/tools/loopback_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c index 41e1820d9ac9..d38bb4fbd6b9 100644 --- a/drivers/staging/greybus/tools/loopback_test.c +++ b/drivers/staging/greybus/tools/loopback_test.c @@ -637,7 +637,7 @@ baddir: static int open_poll_files(struct loopback_test *t) { struct loopback_device *dev; - char buf[MAX_STR_LEN]; + char buf[MAX_SYSFS_PATH + MAX_STR_LEN]; char dummy; int fds_idx = 0; int i; -- cgit v1.2.3-58-ga151 From ae62cf5eb2792d9a818c2d93728ed92119357017 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 12 Mar 2020 12:01:51 +0100 Subject: staging: greybus: loopback_test: fix potential path truncations Newer GCC warns about possible truncations of two generated path names as we're concatenating the configurable sysfs and debugfs path prefixes with a filename and placing the results in buffers of the same size as the maximum length of the prefixes. snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id); snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/", t->sysfs_prefix, d->name); snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s", t->debugfs_prefix, d->name); Fix this by separating the maximum path length from the maximum prefix length and reducing the latter enough to fit the generated strings. Note that we also need to reduce the device-name buffer size as GCC isn't smart enough to figure out that we ever only used MAX_STR_LEN bytes of it. Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/tools/loopback_test.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c index d38bb4fbd6b9..69c6dce9be31 100644 --- a/drivers/staging/greybus/tools/loopback_test.c +++ b/drivers/staging/greybus/tools/loopback_test.c @@ -19,6 +19,7 @@ #include #define MAX_NUM_DEVICES 10 +#define MAX_SYSFS_PREFIX 0x80 #define MAX_SYSFS_PATH 0x200 #define CSV_MAX_LINE 0x1000 #define SYSFS_MAX_INT 0x20 @@ -67,7 +68,7 @@ struct loopback_results { }; struct loopback_device { - char name[MAX_SYSFS_PATH]; + char name[MAX_STR_LEN]; char sysfs_entry[MAX_SYSFS_PATH]; char debugfs_entry[MAX_SYSFS_PATH]; struct loopback_results results; @@ -93,8 +94,8 @@ struct loopback_test { int stop_all; int poll_count; char test_name[MAX_STR_LEN]; - char sysfs_prefix[MAX_SYSFS_PATH]; - char debugfs_prefix[MAX_SYSFS_PATH]; + char sysfs_prefix[MAX_SYSFS_PREFIX]; + char debugfs_prefix[MAX_SYSFS_PREFIX]; struct timespec poll_timeout; struct loopback_device devices[MAX_NUM_DEVICES]; struct loopback_results aggregate_results; @@ -907,10 +908,10 @@ int main(int argc, char *argv[]) t.iteration_max = atoi(optarg); break; case 'S': - snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", optarg); + snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg); break; case 'D': - snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", optarg); + snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg); break; case 'm': t.mask = atol(optarg); @@ -961,10 +962,10 @@ int main(int argc, char *argv[]) } if (!strcmp(t.sysfs_prefix, "")) - snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", sysfs_prefix); + snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", sysfs_prefix); if (!strcmp(t.debugfs_prefix, "")) - snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", debugfs_prefix); + snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", debugfs_prefix); ret = find_loopback_devices(&t); if (ret) -- cgit v1.2.3-58-ga151 From bb5786b9286c253557a0115bc8d21879e61b7b94 Mon Sep 17 00:00:00 2001 From: Michael Straube Date: Thu, 12 Mar 2020 10:36:52 +0100 Subject: staging: rtl8188eu: Add device id for MERCUSYS MW150US v2 This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7 Signed-off-by: Michael Straube Cc: stable Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/os_dep/usb_intf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rtl8188eu/os_dep/usb_intf.c b/drivers/staging/rtl8188eu/os_dep/usb_intf.c index b5d42f411dd8..845c8817281c 100644 --- a/drivers/staging/rtl8188eu/os_dep/usb_intf.c +++ b/drivers/staging/rtl8188eu/os_dep/usb_intf.c @@ -38,6 +38,7 @@ static const struct usb_device_id rtw_usb_id_tbl[] = { {USB_DEVICE(0x2001, 0x331B)}, /* D-Link DWA-121 rev B1 */ {USB_DEVICE(0x2357, 0x010c)}, /* TP-Link TL-WN722N v2 */ {USB_DEVICE(0x2357, 0x0111)}, /* TP-Link TL-WN727N v5.21 */ + {USB_DEVICE(0x2C4E, 0x0102)}, /* MERCUSYS MW150US v2 */ {USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */ {USB_DEVICE(USB_VENDER_ID_REALTEK, 0xffef)}, /* Rosewill RNX-N150NUB */ {} /* Terminating entry */ -- cgit v1.2.3-58-ga151