From 3bb1a852ab6c9cdf211a2f4a2f502340c8c38eca Mon Sep 17 00:00:00 2001 From: Martin Bligh Date: Sat, 28 Oct 2006 10:38:24 -0700 Subject: [PATCH] vmscan: Fix temp_priority race The temp_priority field in zone is racy, as we can walk through a reclaim path, and just before we copy it into prev_priority, it can be overwritten (say with DEF_PRIORITY) by another reclaimer. The same bug is contained in both try_to_free_pages and balance_pgdat, but it is fixed slightly differently. In balance_pgdat, we keep a separate priority record per zone in a local array. In try_to_free_pages there is no need to do this, as the priority level is the same for all zones that we reclaim from. Impact of this bug is that temp_priority is copied into prev_priority, and setting this artificially high causes reclaimers to set distress artificially low. They then fail to reclaim mapped pages, when they are, in fact, under severe memory pressure (their priority may be as low as 0). This causes the OOM killer to fire incorrectly. From: Andrew Morton __zone_reclaim() isn't modifying zone->prev_priority. But zone->prev_priority is used in the decision whether or not to bring mapped pages onto the inactive list. Hence there's a risk here that __zone_reclaim() will fail because zone->prev_priority ir large (ie: low urgency) and lots of mapped pages end up stuck on the active list. Fix that up by decreasing (ie making more urgent) zone->prev_priority as __zone_reclaim() scans the zone's pages. This bug perhaps explains why ZONE_RECLAIM_PRIORITY was created. It should be possible to remove that now, and to just start out at DEF_PRIORITY? Cc: Nick Piggin Cc: Christoph Lameter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mmzone.h | 6 +----- mm/page_alloc.c | 2 +- mm/vmscan.c | 55 +++++++++++++++++++++++++++++++++++++------------- mm/vmstat.c | 2 -- 4 files changed, 43 insertions(+), 22 deletions(-) diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index ed0762b283a9..e06683e2bea3 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -218,13 +218,9 @@ struct zone { * under - it drives the swappiness decision: whether to unmap mapped * pages. * - * temp_priority is used to remember the scanning priority at which - * this zone was successfully refilled to free_pages == pages_high. - * - * Access to both these fields is quite racy even on uniprocessor. But + * Access to both this field is quite racy even on uniprocessor. But * it is expected to average out OK. */ - int temp_priority; int prev_priority; diff --git a/mm/page_alloc.c b/mm/page_alloc.c index f5fc45472d5c..ecf853b5e30e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2407,7 +2407,7 @@ static void __meminit free_area_init_core(struct pglist_data *pgdat, zone->zone_pgdat = pgdat; zone->free_pages = 0; - zone->temp_priority = zone->prev_priority = DEF_PRIORITY; + zone->prev_priority = DEF_PRIORITY; zone_pcp_init(zone); INIT_LIST_HEAD(&zone->active_list); diff --git a/mm/vmscan.c b/mm/vmscan.c index f05527bf792b..b32560ead5c0 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -723,6 +723,20 @@ done: return nr_reclaimed; } +/* + * We are about to scan this zone at a certain priority level. If that priority + * level is smaller (ie: more urgent) than the previous priority, then note + * that priority level within the zone. This is done so that when the next + * process comes in to scan this zone, it will immediately start out at this + * priority level rather than having to build up its own scanning priority. + * Here, this priority affects only the reclaim-mapped threshold. + */ +static inline void note_zone_scanning_priority(struct zone *zone, int priority) +{ + if (priority < zone->prev_priority) + zone->prev_priority = priority; +} + static inline int zone_is_near_oom(struct zone *zone) { return zone->pages_scanned >= (zone->nr_active + zone->nr_inactive)*3; @@ -972,9 +986,7 @@ static unsigned long shrink_zones(int priority, struct zone **zones, if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) continue; - zone->temp_priority = priority; - if (zone->prev_priority > priority) - zone->prev_priority = priority; + note_zone_scanning_priority(zone, priority); if (zone->all_unreclaimable && priority != DEF_PRIORITY) continue; /* Let kswapd poll it */ @@ -1024,7 +1036,6 @@ unsigned long try_to_free_pages(struct zone **zones, gfp_t gfp_mask) if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) continue; - zone->temp_priority = DEF_PRIORITY; lru_pages += zone->nr_active + zone->nr_inactive; } @@ -1065,13 +1076,22 @@ unsigned long try_to_free_pages(struct zone **zones, gfp_t gfp_mask) if (!sc.all_unreclaimable) ret = 1; out: + /* + * Now that we've scanned all the zones at this priority level, note + * that level within the zone so that the next thread which performs + * scanning of this zone will immediately start out at this priority + * level. This affects only the decision whether or not to bring + * mapped pages onto the inactive list. + */ + if (priority < 0) + priority = 0; for (i = 0; zones[i] != 0; i++) { struct zone *zone = zones[i]; if (!cpuset_zone_allowed(zone, __GFP_HARDWALL)) continue; - zone->prev_priority = zone->temp_priority; + zone->prev_priority = priority; } return ret; } @@ -1111,6 +1131,11 @@ static unsigned long balance_pgdat(pg_data_t *pgdat, int order) .swap_cluster_max = SWAP_CLUSTER_MAX, .swappiness = vm_swappiness, }; + /* + * temp_priority is used to remember the scanning priority at which + * this zone was successfully refilled to free_pages == pages_high. + */ + int temp_priority[MAX_NR_ZONES]; loop_again: total_scanned = 0; @@ -1118,11 +1143,8 @@ loop_again: sc.may_writepage = !laptop_mode; count_vm_event(PAGEOUTRUN); - for (i = 0; i < pgdat->nr_zones; i++) { - struct zone *zone = pgdat->node_zones + i; - - zone->temp_priority = DEF_PRIORITY; - } + for (i = 0; i < pgdat->nr_zones; i++) + temp_priority[i] = DEF_PRIORITY; for (priority = DEF_PRIORITY; priority >= 0; priority--) { int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */ @@ -1183,10 +1205,9 @@ scan: if (!zone_watermark_ok(zone, order, zone->pages_high, end_zone, 0)) all_zones_ok = 0; - zone->temp_priority = priority; - if (zone->prev_priority > priority) - zone->prev_priority = priority; + temp_priority[i] = priority; sc.nr_scanned = 0; + note_zone_scanning_priority(zone, priority); nr_reclaimed += shrink_zone(priority, zone, &sc); reclaim_state->reclaimed_slab = 0; nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL, @@ -1226,10 +1247,15 @@ scan: break; } out: + /* + * Note within each zone the priority level at which this zone was + * brought into a happy state. So that the next thread which scans this + * zone will start out at that priority level. + */ for (i = 0; i < pgdat->nr_zones; i++) { struct zone *zone = pgdat->node_zones + i; - zone->prev_priority = zone->temp_priority; + zone->prev_priority = temp_priority[i]; } if (!all_zones_ok) { cond_resched(); @@ -1614,6 +1640,7 @@ static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) */ priority = ZONE_RECLAIM_PRIORITY; do { + note_zone_scanning_priority(zone, priority); nr_reclaimed += shrink_zone(priority, zone, &sc); priority--; } while (priority >= 0 && nr_reclaimed < nr_pages); diff --git a/mm/vmstat.c b/mm/vmstat.c index 45b124e012f5..8614e8f6743b 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -587,11 +587,9 @@ static int zoneinfo_show(struct seq_file *m, void *arg) seq_printf(m, "\n all_unreclaimable: %u" "\n prev_priority: %i" - "\n temp_priority: %i" "\n start_pfn: %lu", zone->all_unreclaimable, zone->prev_priority, - zone->temp_priority, zone->zone_start_pfn); spin_unlock_irqrestore(&zone->lock, flags); seq_putc(m, '\n'); -- cgit v1.2.3-58-ga151