From 7e7ae38bf928c5cfa6dd6e9a2cf8b42c84a27c92 Mon Sep 17 00:00:00 2001 From: Yoshiaki Okamoto Date: Sat, 20 Jul 2019 22:23:18 +0900 Subject: USB: serial: option: Add support for ZTE MF871A This patch adds support for MF871A USB modem (aka Speed USB STICK U03) to option driver. This modem is manufactured by ZTE corporation, and sold by KDDI. Interface layout: 0: AT 1: MODEM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1481 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=1234567890ABCDEF C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Co-developed-by: Hiroyuki Yamamoto Signed-off-by: Hiroyuki Yamamoto Signed-off-by: Yoshiaki Okamoto Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c1582fbd1150..23d4a5f543af 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1549,6 +1549,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ .driver_info = RSVD(2) }, { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) }, /* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0x00, 0x00) }, /* ZTE MF871A */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-58-ga151 From 552573e42aab5f75aff9bab855a9677979d9a7d5 Mon Sep 17 00:00:00 2001 From: Rogan Dawes Date: Wed, 17 Jul 2019 11:11:34 +0200 Subject: USB: serial: option: add D-Link DWM-222 device ID Add device id for D-Link DWM-222 A2. MI_00 D-Link HS-USB Diagnostics MI_01 D-Link HS-USB Modem MI_02 D-Link HS-USB AT Port MI_03 D-Link HS-USB NMEA MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan) MI_05 USB Mass Storage Device Cc: stable@vger.kernel.org Signed-off-by: Rogan Dawes Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 23d4a5f543af..f2c19660ed16 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1953,6 +1953,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e3d, 0xff), /* D-Link DWM-222 A2 */ + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ -- cgit v1.2.3-58-ga151 From 5dac665cf403967bb79a7aeb8c182a621fe617ff Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 31 Jul 2019 19:15:43 +0900 Subject: usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role" Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Fixes: cc995c9ec118 ("usb: gadget: udc: renesas_usb3: add support for usb role swap") Cc: # v4.12+ Reviewed-by: Geert Uytterhoeven Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/renesas_usb3.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 87062d22134d..1f4c3fbd1df8 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -2450,9 +2451,9 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, if (usb3->forced_b_device) return -EBUSY; - if (!strncmp(buf, "host", strlen("host"))) + if (sysfs_streq(buf, "host")) new_mode_is_host = true; - else if (!strncmp(buf, "peripheral", strlen("peripheral"))) + else if (sysfs_streq(buf, "peripheral")) new_mode_is_host = false; else return -EINVAL; -- cgit v1.2.3-58-ga151 From 602fda17c7356bb7ae98467d93549057481d11dd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 26 Jul 2019 14:59:03 +1000 Subject: usb: gadget: composite: Clear "suspended" on reset/disconnect In some cases, one can get out of suspend with a reset or a disconnect followed by a reconnect. Previously we would leave a stale suspended flag set. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 9118b42c70b6..76883ff4f5bb 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1976,6 +1976,7 @@ void composite_disconnect(struct usb_gadget *gadget) * disconnect callbacks? */ spin_lock_irqsave(&cdev->lock, flags); + cdev->suspended = 0; if (cdev->config) reset_config(cdev); if (cdev->driver->disconnect) -- cgit v1.2.3-58-ga151 From 4a56a478a525d6427be90753451c40e1327caa1a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 26 Jul 2019 14:59:04 +1000 Subject: usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt If fsg_disable() and fsg_set_alt() are called too closely to each other (for example due to a quick reset/reconnect), what can happen is that fsg_set_alt sets common->new_fsg from an interrupt while handle_exception is trying to process the config change caused by fsg_disable(): fsg_disable() ... handle_exception() sets state back to FSG_STATE_NORMAL hasn't yet called do_set_interface() or is inside it. ---> interrupt fsg_set_alt sets common->new_fsg queues a new FSG_STATE_CONFIG_CHANGE <--- Now, the first handle_exception can "see" the updated new_fsg, treats it as if it was a fsg_set_alt() response, call usb_composite_setup_continue() etc... But then, the thread sees the second FSG_STATE_CONFIG_CHANGE, and goes back down the same path, wipes and reattaches a now active fsg, and .. calls usb_composite_setup_continue() which at this point is wrong. Not only we get a backtrace, but I suspect the second set_interface wrecks some state causing the host to get upset in my case. This fixes it by replacing "new_fsg" by a "state argument" (same principle) which is set in the same lock section as the state update, and retrieved similarly. That way, there is never any discrepancy between the dequeued state and the observed value of it. We keep the ability to have the latest reconfig operation take precedence, but we guarantee that once "dequeued" the argument (new_fsg) will not be clobbered by any new event. Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_mass_storage.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 29cc5693e05c..7c96c4665178 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -261,7 +261,7 @@ struct fsg_common; struct fsg_common { struct usb_gadget *gadget; struct usb_composite_dev *cdev; - struct fsg_dev *fsg, *new_fsg; + struct fsg_dev *fsg; wait_queue_head_t io_wait; wait_queue_head_t fsg_wait; @@ -290,6 +290,7 @@ struct fsg_common { unsigned int bulk_out_maxpacket; enum fsg_state state; /* For exception handling */ unsigned int exception_req_tag; + void *exception_arg; enum data_direction data_dir; u32 data_size; @@ -391,7 +392,8 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) /* These routines may be called in process context or in_irq */ -static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +static void __raise_exception(struct fsg_common *common, enum fsg_state new_state, + void *arg) { unsigned long flags; @@ -404,6 +406,7 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state) if (common->state <= new_state) { common->exception_req_tag = common->ep0_req_tag; common->state = new_state; + common->exception_arg = arg; if (common->thread_task) send_sig_info(SIGUSR1, SEND_SIG_PRIV, common->thread_task); @@ -411,6 +414,10 @@ static void raise_exception(struct fsg_common *common, enum fsg_state new_state) spin_unlock_irqrestore(&common->lock, flags); } +static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +{ + __raise_exception(common, new_state, NULL); +} /*-------------------------------------------------------------------------*/ @@ -2285,16 +2292,16 @@ reset: static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = fsg; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, fsg); return USB_GADGET_DELAYED_STATUS; } static void fsg_disable(struct usb_function *f) { struct fsg_dev *fsg = fsg_from_func(f); - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); } @@ -2307,6 +2314,7 @@ static void handle_exception(struct fsg_common *common) enum fsg_state old_state; struct fsg_lun *curlun; unsigned int exception_req_tag; + struct fsg_dev *new_fsg; /* * Clear the existing signals. Anything but SIGUSR1 is converted @@ -2360,6 +2368,7 @@ static void handle_exception(struct fsg_common *common) common->next_buffhd_to_fill = &common->buffhds[0]; common->next_buffhd_to_drain = &common->buffhds[0]; exception_req_tag = common->exception_req_tag; + new_fsg = common->exception_arg; old_state = common->state; common->state = FSG_STATE_NORMAL; @@ -2413,8 +2422,8 @@ static void handle_exception(struct fsg_common *common) break; case FSG_STATE_CONFIG_CHANGE: - do_set_interface(common, common->new_fsg); - if (common->new_fsg) + do_set_interface(common, new_fsg); + if (new_fsg) usb_composite_setup_continue(common->cdev); break; @@ -2989,8 +2998,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) DBG(fsg, "unbind\n"); if (fsg->common->fsg == fsg) { - fsg->common->new_fsg = NULL; - raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + __raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE, NULL); /* FIXME: make interruptible or killable somehow? */ wait_event(common->fsg_wait, common->fsg != fsg); } -- cgit v1.2.3-58-ga151 From 303911cfc5b95d33687d9046133ff184cf5043ff Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 12 Aug 2019 16:11:07 -0400 Subject: USB: core: Fix races in character device registration and deregistraion The syzbot fuzzer has found two (!) races in the USB character device registration and deregistration routines. This patch fixes the races. The first race results from the fact that usb_deregister_dev() sets usb_minors[intf->minor] to NULL before calling device_destroy() on the class device. This leaves a window during which another thread can allocate the same minor number but will encounter a duplicate name error when it tries to register its own class device. A typical error message in the system log would look like: sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0' The patch fixes this race by destroying the class device first. The second race is in usb_register_dev(). When that routine runs, it first allocates a minor number, then drops minor_rwsem, and then creates the class device. If the device creation fails, the minor number is deallocated and the whole routine returns an error. But during the time while minor_rwsem was dropped, there is a window in which the minor number is allocated and so another thread can successfully open the device file. Typically this results in use-after-free errors or invalid accesses when the other thread closes its open file reference, because the kernel then tries to release resources that were already deallocated when usb_register_dev() failed. The patch fixes this race by keeping minor_rwsem locked throughout the entire routine. Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/file.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c index 65de6f73b672..558890ada0e5 100644 --- a/drivers/usb/core/file.c +++ b/drivers/usb/core/file.c @@ -193,9 +193,10 @@ int usb_register_dev(struct usb_interface *intf, intf->minor = minor; break; } - up_write(&minor_rwsem); - if (intf->minor < 0) + if (intf->minor < 0) { + up_write(&minor_rwsem); return -EXFULL; + } /* create a usb class device for this usb interface */ snprintf(name, sizeof(name), class_driver->name, minor - minor_base); @@ -203,12 +204,11 @@ int usb_register_dev(struct usb_interface *intf, MKDEV(USB_MAJOR, minor), class_driver, "%s", kbasename(name)); if (IS_ERR(intf->usb_dev)) { - down_write(&minor_rwsem); usb_minors[minor] = NULL; intf->minor = -1; - up_write(&minor_rwsem); retval = PTR_ERR(intf->usb_dev); } + up_write(&minor_rwsem); return retval; } EXPORT_SYMBOL_GPL(usb_register_dev); @@ -234,12 +234,12 @@ void usb_deregister_dev(struct usb_interface *intf, return; dev_dbg(&intf->dev, "removing %d minor\n", intf->minor); + device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); down_write(&minor_rwsem); usb_minors[intf->minor] = NULL; up_write(&minor_rwsem); - device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor)); intf->usb_dev = NULL; intf->minor = -1; destroy_usb_class(); -- cgit v1.2.3-58-ga151 From 6caf0be40a707689e8ff8824fdb96ef77685b1ba Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 15 Aug 2019 01:26:02 -0700 Subject: USB: serial: option: Add Motorola modem UARTs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Motorola Mapphone devices such as Droid 4 there are five USB ports that do not use the same layout as Gobi 1K/2K/etc devices listed in qcserial.c. So we should use qcaux.c or option.c as noted by Dan Williams . As the Motorola USB serial ports have an interrupt endpoint as shown with lsusb -v, we should use option.c instead of qcaux.c as pointed out by Johan Hovold . The ff/ff/ff interfaces seem to always be UARTs on Motorola devices. For the other interfaces, class 0x0a (CDC Data) should not in general be added as they are typically part of a multi-interface function as noted earlier by Bjørn Mork . However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a class is only used for flashing the modem firmware, and there are no other interfaces. So I've added that too with more details below as it works just fine. The ttyUSB ports on Droid 4 are: ttyUSB0 DIAG, CQDM-capable ttyUSB1 MUX or NMEA, no response ttyUSB2 MUX or NMEA, no response ttyUSB3 TCMD ttyUSB4 AT-capable The ttyUSB0 is detected as QCDM capable by ModemManager. I think it's only used for debugging with ModemManager --debug for sending custom AT commands though. ModemManager already can manage data connection using the USB QMI ports that are already handled by the qmi_wwan.c driver. To enable the MUX or NMEA ports, it seems that something needs to be done additionally to enable them, maybe via the DIAG or TCMD port. It might be just a NVRAM setting somewhere, but I have no idea what NVRAM settings may need changing for that. The TCMD port seems to be a Motorola custom protocol for testing the modem and to configure it's NVRAM and seems to work just fine based on a quick test with a minimal tcmdrw tool I wrote. The voice modem AT-capable port seems to provide only partial support, and no PM support compared to the TS 27.010 based UART wired directly to the modem. The UARTs added with this change are the same product IDs as the Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't have any mdm9600 based devices, so I have only tested these on mdm6600 based droid 4. Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Linux kernel driver moto_flashqsc.c just seems to change the port->bulk_out_size to 8K from the default. And is only used for flashing the modem firmware it seems. I've verified that flashing the modem with signed firmware works just fine with the option driver after manually toggling the GPIO pins, so I've added droid 4 modem flashing mode to the option driver. I've not added the other devices listed in moto_flashqsc.c in case they really need different port->bulk_out_size. Those can be added as they get tested to work for flashing the modem. After this patch the output of /sys/kernel/debug/usb/devices has the following for normal 22b8:2a70 mode including the related qmi_wwan interfaces: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=2a70 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms In 22b8:900e "qc_dload" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=900e Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And in 22b8:4281 "ram_downloader" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=4281 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Cc: Bjørn Mork Cc: Dan Williams Cc: Lars Melin Cc: Marcel Partap Cc: Merlijn Wajer Cc: Michael Scott Cc: NeKit Cc: Pavel Machek Cc: Sebastian Reichel Tested-by: Pavel Machek Signed-off-by: Tony Lindgren Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f2c19660ed16..546d7f610a24 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -968,6 +968,11 @@ static const struct usb_device_id option_ids[] = { { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) }, + /* Motorola devices */ + { USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2a70, 0xff, 0xff, 0xff) }, /* mdm6600 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x2e0a, 0xff, 0xff, 0xff) }, /* mdm9600 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x4281, 0x0a, 0x00, 0xfc) }, /* mdm ram dl */ + { USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x900e, 0xff, 0xff, 0xff) }, /* mdm qc dl */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, -- cgit v1.2.3-58-ga151 From e5d8badf37e6b547842f2fcde10361b29e08bd36 Mon Sep 17 00:00:00 2001 From: Bob Ham Date: Wed, 24 Jul 2019 07:52:26 -0700 Subject: USB: serial: option: add the BroadMobi BM818 card Add a VID:PID for the BroadMobi BM818 M.2 card T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2060 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Bob Ham Signed-off-by: Angus Ainslie (Purism) Cc: stable [ johan: use USB_DEVICE_INTERFACE_CLASS() ] Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 546d7f610a24..38e920ac7f82 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1965,6 +1965,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2031, 0xff), /* Olicard 600 */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x2060, 0xff), /* BroadMobi BM818 */ + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, -- cgit v1.2.3-58-ga151 From c52873e5a1ef72f845526d9f6a50704433f9c625 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 8 Aug 2019 16:21:19 +0200 Subject: usb: cdc-acm: make sure a refcount is taken early enough destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 183b41753c98..62f4fb9b362f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1301,10 +1301,6 @@ made_compressed_probe: tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; - minor = acm_alloc_minor(acm); - if (minor < 0) - goto alloc_fail1; - ctrlsize = usb_endpoint_maxp(epctrl); readsize = usb_endpoint_maxp(epread) * (quirks == SINGLE_RX_URB ? 1 : 2); @@ -1312,6 +1308,13 @@ made_compressed_probe: acm->writesize = usb_endpoint_maxp(epwrite) * 20; acm->control = control_interface; acm->data = data_interface; + + usb_get_intf(acm->control); /* undone in destruct() */ + + minor = acm_alloc_minor(acm); + if (minor < 0) + goto alloc_fail1; + acm->minor = minor; acm->dev = usb_dev; if (h.usb_cdc_acm_descriptor) @@ -1458,7 +1461,6 @@ skip_countries: usb_driver_claim_interface(&acm_driver, data_interface, acm); usb_set_intfdata(data_interface, acm); - usb_get_intf(control_interface); tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor, &control_interface->dev); if (IS_ERR(tty_dev)) { -- cgit v1.2.3-58-ga151 From 54364278fb3cabdea51d6398b07c87415065b3fc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 13 Aug 2019 11:35:41 +0200 Subject: USB: CDC: fix sanity checks in CDC union parser A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index e844bb7b5676..5adf489428aa 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -2218,14 +2218,14 @@ int cdc_parse_cdc_header(struct usb_cdc_parsed_header *hdr, (struct usb_cdc_dmm_desc *)buffer; break; case USB_CDC_MDLM_TYPE: - if (elength < sizeof(struct usb_cdc_mdlm_desc *)) + if (elength < sizeof(struct usb_cdc_mdlm_desc)) goto next_desc; if (desc) return -EINVAL; desc = (struct usb_cdc_mdlm_desc *)buffer; break; case USB_CDC_MDLM_DETAIL_TYPE: - if (elength < sizeof(struct usb_cdc_mdlm_detail_desc *)) + if (elength < sizeof(struct usb_cdc_mdlm_detail_desc)) goto next_desc; if (detail) return -EINVAL; -- cgit v1.2.3-58-ga151 From 777758888ffe59ef754cc39ab2f275dc277732f4 Mon Sep 17 00:00:00 2001 From: Hans Ulli Kroll Date: Sat, 10 Aug 2019 17:04:58 +0200 Subject: usb: host: fotg2: restart hcd after port reset On the Gemini SoC the FOTG2 stalls after port reset so restart the HCD after each port reset. Signed-off-by: Hans Ulli Kroll Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20190810150458.817-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fotg210-hcd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 77cc36efae95..0dbfa5c10703 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -1629,6 +1629,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* see what we found out */ temp = check_reset_complete(fotg210, wIndex, status_reg, fotg210_readl(fotg210, status_reg)); + + /* restart schedule */ + fotg210->command |= CMD_RUN; + fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); } if (!(temp & (PORT_RESUME|PORT_RESET))) { -- cgit v1.2.3-58-ga151 From 141822aa3f79efc8a2ec3ed464f2fd2c93ccd803 Mon Sep 17 00:00:00 2001 From: André Draszik Date: Sat, 10 Aug 2019 16:07:58 +0100 Subject: usb: chipidea: imx: fix EPROBE_DEFER support during driver probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If driver probe needs to be deferred, e.g. because ci_hdrc_add_device() isn't ready yet, this driver currently misbehaves badly: a) success is still reported to the driver core (meaning a 2nd probe attempt will never be done), leaving the driver in a dysfunctional state and the hardware unusable b) driver remove / shutdown OOPSes: [ 206.786916] Unable to handle kernel paging request at virtual address fffffdff [ 206.794148] pgd = 880b9f82 [ 206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000 [ 206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM [ 206.808581] Modules linked in: wl18xx evbug [ 206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1 [ 206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 206.826813] PC is at ci_hdrc_remove_device+0x4/0x20 [ 206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8 [ 206.836407] pc : [<805cd4b0>] lr : [<805d62cc>] psr: 20000013 [ 206.842678] sp : a806be40 ip : 00000001 fp : 80adbd3c [ 206.847906] r10: 80b1b794 r9 : 80d5dfe0 r8 : a8192c44 [ 206.853136] r7 : 80db93a0 r6 : a8192c10 r5 : a8192c00 r4 : a93a4a00 [ 206.859668] r3 : 00000000 r2 : a8192ce4 r1 : ffffffff r0 : fffffdfb [ 206.866201] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 206.873341] Control: 10c5387d Table: a9e0c06a DAC: 00000051 [ 206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c) [ 206.885624] Stack: (0xa806be40 to 0xa806c000) [ 206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000 [ 206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08 [ 206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08 [ 206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005 [ 206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc [ 206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001 [ 206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20 [ 206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140 [ 206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600 [ 206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000 [ 206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058 [ 206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000 [ 207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8) [ 207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218) [ 207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50) [ 207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0) [ 207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 207.045308] Exception stack(0xa806bfa8 to 0xa806bff0) [ 207.050368] bfa0: 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 [ 207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004) [ 207.078021] ---[ end trace be47424e3fd46e9f ]--- [ 207.082647] Kernel panic - not syncing: Fatal exception [ 207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]--- c) the error path in combination with driver removal causes imbalanced calls to the clk_*() and pm_()* APIs a) happens because the original intended return value is overwritten (with 0) by the return code of regulator_disable() in ci_hdrc_imx_probe()'s error path b) happens because ci_pdev is -EPROBE_DEFER, which causes ci_hdrc_remove_device() to OOPS Fix a) by being more careful in ci_hdrc_imx_probe()'s error path and not overwriting the real error code Fix b) by calling the respective cleanup functions during remove only when needed (when ci_pdev != NULL, i.e. when everything was initialised correctly). This also has the side effect of not causing imbalanced clk_*() and pm_*() API calls as part of the error code path. Fixes: 7c8e8909417e ("usb: chipidea: imx: add HSIC support") Signed-off-by: André Draszik Cc: stable CC: Peter Chen CC: Greg Kroah-Hartman CC: Shawn Guo CC: Sascha Hauer CC: Pengutronix Kernel Team CC: Fabio Estevam CC: NXP Linux Team CC: linux-usb@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/ci_hdrc_imx.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index b5abfe89190c..df8812c30640 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -454,9 +454,11 @@ err_clk: imx_disable_unprepare_clks(dev); disable_hsic_regulator: if (data->hsic_pad_regulator) - ret = regulator_disable(data->hsic_pad_regulator); + /* don't overwrite original ret (cf. EPROBE_DEFER) */ + regulator_disable(data->hsic_pad_regulator); if (pdata.flags & CI_HDRC_PMQOS) pm_qos_remove_request(&data->pm_qos_req); + data->ci_pdev = NULL; return ret; } @@ -469,14 +471,17 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); } - ci_hdrc_remove_device(data->ci_pdev); + if (data->ci_pdev) + ci_hdrc_remove_device(data->ci_pdev); if (data->override_phy_control) usb_phy_shutdown(data->phy); - imx_disable_unprepare_clks(&pdev->dev); - if (data->plat_data->flags & CI_HDRC_PMQOS) - pm_qos_remove_request(&data->pm_qos_req); - if (data->hsic_pad_regulator) - regulator_disable(data->hsic_pad_regulator); + if (data->ci_pdev) { + imx_disable_unprepare_clks(&pdev->dev); + if (data->plat_data->flags & CI_HDRC_PMQOS) + pm_qos_remove_request(&data->pm_qos_req); + if (data->hsic_pad_regulator) + regulator_disable(data->hsic_pad_regulator); + } return 0; } -- cgit v1.2.3-58-ga151 From dd3ecf17ba70a70d2c9ef9ba725281b84f8eef12 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 11 Aug 2019 10:05:15 +0200 Subject: usb: don't create dma pools for HCDs with a localmem_pool If the HCD provides a localmem pool we will never use the DMA pools, so don't create them. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20190811080520.21712-2-hch@lst.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/buffer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 1359b78a624e..1a5b3dcae930 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -66,9 +66,9 @@ int hcd_buffer_create(struct usb_hcd *hcd) char name[16]; int i, size; - if (!IS_ENABLED(CONFIG_HAS_DMA) || - (!is_device_dma_capable(hcd->self.sysdev) && - !hcd->localmem_pool)) + if (hcd->localmem_pool || + !IS_ENABLED(CONFIG_HAS_DMA) || + !is_device_dma_capable(hcd->self.sysdev)) return 0; for (i = 0; i < HCD_BUFFER_POOLS; i++) { -- cgit v1.2.3-58-ga151 From edfbcb321faf07ca970e4191abe061deeb7d3788 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 11 Aug 2019 10:05:16 +0200 Subject: usb: add a hcd_uses_dma helper The USB buffer allocation code is the only place in the usb core (and in fact the whole kernel) that uses is_device_dma_capable, while the URB mapping code uses the uses_dma flag in struct usb_bus. Switch the buffer allocation to use the uses_dma flag used by the rest of the USB code, and create a helper in hcd.h that checks this flag as well as the CONFIG_HAS_DMA to simplify the caller a bit. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/buffer.c | 10 +++------- drivers/usb/core/hcd.c | 4 ++-- drivers/usb/dwc2/hcd.c | 2 +- include/linux/usb.h | 2 +- include/linux/usb/hcd.h | 3 +++ 5 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 1a5b3dcae930..6cf22c27f2d2 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -66,9 +66,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) char name[16]; int i, size; - if (hcd->localmem_pool || - !IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(hcd->self.sysdev)) + if (hcd->localmem_pool || !hcd_uses_dma(hcd)) return 0; for (i = 0; i < HCD_BUFFER_POOLS; i++) { @@ -129,8 +127,7 @@ void *hcd_buffer_alloc( return gen_pool_dma_alloc(hcd->localmem_pool, size, dma); /* some USB hosts just use PIO */ - if (!IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(bus->sysdev)) { + if (!hcd_uses_dma(hcd)) { *dma = ~(dma_addr_t) 0; return kmalloc(size, mem_flags); } @@ -160,8 +157,7 @@ void hcd_buffer_free( return; } - if (!IS_ENABLED(CONFIG_HAS_DMA) || - !is_device_dma_capable(bus->sysdev)) { + if (!hcd_uses_dma(hcd)) { kfree(addr); return; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 2ccbc2f83570..8592c0344fe8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1412,7 +1412,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, if (usb_endpoint_xfer_control(&urb->ep->desc)) { if (hcd->self.uses_pio_for_control) return ret; - if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (is_vmalloc_addr(urb->setup_packet)) { WARN_ONCE(1, "setup packet is not dma capable\n"); return -EAGAIN; @@ -1446,7 +1446,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; if (urb->transfer_buffer_length != 0 && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { - if (IS_ENABLED(CONFIG_HAS_DMA) && hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (urb->num_sgs) { int n; diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index ee144ff8af5b..111787a137ee 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4608,7 +4608,7 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, buf = urb->transfer_buffer; - if (hcd->self.uses_dma) { + if (hcd_uses_dma(hcd)) { if (!buf && (urb->transfer_dma & 3)) { dev_err(hsotg->dev, "%s: unaligned transfer with no transfer_buffer", diff --git a/include/linux/usb.h b/include/linux/usb.h index 83d35d993e8c..e87826e23d59 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1457,7 +1457,7 @@ typedef void (*usb_complete_t)(struct urb *); * field rather than determining a dma address themselves. * * Note that transfer_buffer must still be set if the controller - * does not support DMA (as indicated by bus.uses_dma) and when talking + * does not support DMA (as indicated by hcd_uses_dma()) and when talking * to root hub. If you have to trasfer between highmem zone and the device * on such controller, create a bounce buffer or bail out with an error. * If transfer_buffer cannot be set (is in highmem) and the controller is DMA diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index bab27ccc8ff5..a20e7815d814 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -422,6 +422,9 @@ static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd, return hcd->high_prio_bh.completing_ep == ep; } +#define hcd_uses_dma(hcd) \ + (IS_ENABLED(CONFIG_HAS_DMA) && (hcd)->self.uses_dma) + extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, int status); -- cgit v1.2.3-58-ga151