From 9020b7cc27439e23a0e993f79ef8632fea5e88d5 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 19 Jul 2012 19:58:39 +0200 Subject: RTC: add DT bindings to pxa-rtc This patch adds generic device tree bindings to the PXA RTC driver. Documentation for bindings were also added. Signed-off-by: Daniel Mack Cc: Robert Jarzmik Cc: Alessandro Zummo Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- Documentation/devicetree/bindings/rtc/pxa-rtc.txt | 14 ++++++++++++++ drivers/rtc/rtc-pxa.c | 11 +++++++++++ 2 files changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/pxa-rtc.txt diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt new file mode 100644 index 000000000000..8c6672a1b7d7 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt @@ -0,0 +1,14 @@ +* PXA RTC + +PXA specific RTC driver. + +Required properties: +- compatible : Should be "marvell,pxa-rtc" + +Examples: + +rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; +}; diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c index 0075c8fd93d8..f771b2ee4b18 100644 --- a/drivers/rtc/rtc-pxa.c +++ b/drivers/rtc/rtc-pxa.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include @@ -396,6 +398,14 @@ static int __exit pxa_rtc_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id pxa_rtc_dt_ids[] = { + { .compatible = "marvell,pxa-rtc" }, + {} +}; +MODULE_DEVICE_TABLE(of, pxa_rtc_dt_ids); +#endif + #ifdef CONFIG_PM static int pxa_rtc_suspend(struct device *dev) { @@ -425,6 +435,7 @@ static struct platform_driver pxa_rtc_driver = { .remove = __exit_p(pxa_rtc_remove), .driver = { .name = "pxa-rtc", + .of_match_table = of_match_ptr(pxa_rtc_dt_ids), #ifdef CONFIG_PM .pm = &pxa_rtc_pm_ops, #endif -- cgit v1.2.3-58-ga151 From 1e7ba630d4aeabef8e022a4099b20ab9f660d37d Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 22 Jul 2012 19:51:02 +0200 Subject: MTD: pxa3xx-nand: add devicetree bindings This patch contains a hack to get the DMA resources of the device when probed from a devicetree node. This can be removed once a generic DMA controller framework lands. A mtd_part_parser_data is passed mtd_device_parse_register which contains a reference to the device node, so MTD partitions can be added as children. Signed-off-by: Daniel Mack Cc: David Woodhouse Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- .../devicetree/bindings/mtd/pxa3xx-nand.txt | 31 ++++++++ drivers/mtd/nand/pxa3xx_nand.c | 85 ++++++++++++++++++---- 2 files changed, 102 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt new file mode 100644 index 000000000000..f1421e2bbab7 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -0,0 +1,31 @@ +PXA3xx NAND DT bindings + +Required properties: + + - compatible: Should be "marvell,pxa3xx-nand" + - reg: The register base for the controller + - interrupts: The interrupt to map + - #address-cells: Set to <1> if the node includes partitions + +Optional properties: + + - marvell,nand-enable-arbiter: Set to enable the bus arbiter + - marvell,nand-keep-config: Set to keep the NAND controller config as set + by the bootloader + - num-cs: Number of chipselect lines to usw + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + + marvell,nand-enable-arbiter; + marvell,nand-keep-config; + num-cs = <1>; + + /* partitions (optional) */ + }; + diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 252aaefcacfa..b0319d8934ad 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include #include @@ -1081,21 +1083,31 @@ static int alloc_nand_resource(struct platform_device *pdev) } clk_enable(info->clk); - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no resource defined for data DMA\n"); - ret = -ENXIO; - goto fail_put_clk; - } - info->drcmr_dat = r->start; + /* + * This is a dirty hack to make this driver work from devicetree + * bindings. It can be removed once we have a prober DMA controller + * framework for DT. + */ + if (pdev->dev.of_node && cpu_is_pxa3xx()) { + info->drcmr_dat = 97; + info->drcmr_cmd = 99; + } else { + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no resource defined for data DMA\n"); + ret = -ENXIO; + goto fail_put_clk; + } + info->drcmr_dat = r->start; - r = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (r == NULL) { - dev_err(&pdev->dev, "no resource defined for command DMA\n"); - ret = -ENXIO; - goto fail_put_clk; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r == NULL) { + dev_err(&pdev->dev, "no resource defined for command DMA\n"); + ret = -ENXIO; + goto fail_put_clk; + } + info->drcmr_cmd = r->start; } - info->drcmr_cmd = r->start; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -1200,12 +1212,55 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static struct of_device_id pxa3xx_nand_dt_ids[] = { + { .compatible = "marvell,pxa3xx-nand" }, + {} +}; +MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); + +static int pxa3xx_nand_probe_dt(struct platform_device *pdev) +{ + struct pxa3xx_nand_platform_data *pdata; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(pxa3xx_nand_dt_ids, &pdev->dev); + + if (!of_id) + return 0; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + if (of_get_property(np, "marvell,nand-enable-arbiter", NULL)) + pdata->enable_arbiter = 1; + if (of_get_property(np, "marvell,nand-keep-config", NULL)) + pdata->keep_config = 1; + of_property_read_u32(np, "num-cs", &pdata->num_cs); + + pdev->dev.platform_data = pdata; + + return 0; +} +#else +static inline int pxa3xx_nand_probe_dt(struct platform_device *) +{ + return 0; +} +#endif + static int pxa3xx_nand_probe(struct platform_device *pdev) { struct pxa3xx_nand_platform_data *pdata; + struct mtd_part_parser_data ppdata = {}; struct pxa3xx_nand_info *info; int ret, cs, probe_success; + ret = pxa3xx_nand_probe_dt(pdev); + if (ret) + return ret; + pdata = pdev->dev.platform_data; if (!pdata) { dev_err(&pdev->dev, "no platform data defined\n"); @@ -1229,8 +1284,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) continue; } + ppdata.of_node = pdev->dev.of_node; ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, - NULL, pdata->parts[cs], + &ppdata, pdata->parts[cs], pdata->nr_parts[cs]); if (!ret) probe_success = 1; @@ -1306,6 +1362,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) static struct platform_driver pxa3xx_nand_driver = { .driver = { .name = "pxa3xx-nand", + .of_match_table = of_match_ptr(pxa3xx_nand_dt_ids), }, .probe = pxa3xx_nand_probe, .remove = pxa3xx_nand_remove, -- cgit v1.2.3-58-ga151 From 9450be76d0e3ebedf301aa09e4f98b4d3a175229 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 22 Jul 2012 16:55:44 +0200 Subject: GPIO: gpio-pxa: simplify pxa_gpio_to_irq() and pxa_irq_to_chip() Simplify the code in gpio-pxa.c and make them based on irq_base. When not probed from devicetree, initialize irq_base from PXA_GPIO_TO_IRQ() or MMP_GPIO_TO_IRQ(), respectively, so the non-DT case still works. Only tested on PXA3xx. Signed-off-by: Daniel Mack Acked-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Haojian Zhuang --- drivers/gpio/gpio-pxa.c | 70 +++++++++++-------------------------------------- 1 file changed, 16 insertions(+), 54 deletions(-) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 58a6a63a6ece..6d0cb9dff27d 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -59,6 +59,7 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) int pxa_last_gpio; +static int irq_base; #ifdef CONFIG_OF static struct irq_domain *domain; @@ -166,63 +167,14 @@ static inline int __gpio_is_occupied(unsigned gpio) return ret; } -#ifdef CONFIG_ARCH_PXA -static inline int __pxa_gpio_to_irq(int gpio) -{ - if (gpio_is_pxa_type(gpio_type)) - return PXA_GPIO_TO_IRQ(gpio); - return -1; -} - -static inline int __pxa_irq_to_gpio(int irq) -{ - if (gpio_is_pxa_type(gpio_type)) - return irq - PXA_GPIO_TO_IRQ(0); - return -1; -} -#else -static inline int __pxa_gpio_to_irq(int gpio) { return -1; } -static inline int __pxa_irq_to_gpio(int irq) { return -1; } -#endif - -#ifdef CONFIG_ARCH_MMP -static inline int __mmp_gpio_to_irq(int gpio) -{ - if (gpio_is_mmp_type(gpio_type)) - return MMP_GPIO_TO_IRQ(gpio); - return -1; -} - -static inline int __mmp_irq_to_gpio(int irq) -{ - if (gpio_is_mmp_type(gpio_type)) - return irq - MMP_GPIO_TO_IRQ(0); - return -1; -} -#else -static inline int __mmp_gpio_to_irq(int gpio) { return -1; } -static inline int __mmp_irq_to_gpio(int irq) { return -1; } -#endif - static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - int gpio, ret; - - gpio = chip->base + offset; - ret = __pxa_gpio_to_irq(gpio); - if (ret >= 0) - return ret; - return __mmp_gpio_to_irq(gpio); + return chip->base + offset + irq_base; } int pxa_irq_to_gpio(int irq) { - int ret; - - ret = __pxa_irq_to_gpio(irq); - if (ret >= 0) - return ret; - return __mmp_irq_to_gpio(irq); + return irq - irq_base; } static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset) @@ -510,7 +462,7 @@ const struct irq_domain_ops pxa_irq_domain_ops = { #ifdef CONFIG_OF static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev) { - int ret, nr_banks, nr_gpios, irq_base; + int ret, nr_banks, nr_gpios; struct device_node *prev, *next, *np = pdev->dev.of_node; const struct of_device_id *of_id = of_match_device(pxa_gpio_dt_ids, &pdev->dev); @@ -564,10 +516,20 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; ret = pxa_gpio_probe_dt(pdev); - if (ret < 0) + if (ret < 0) { pxa_last_gpio = pxa_gpio_nums(); - else +#ifdef CONFIG_ARCH_PXA + if (gpio_is_pxa_type(gpio_type)) + irq_base = PXA_GPIO_TO_IRQ(0); +#endif +#ifdef CONFIG_ARCH_MMP + if (gpio_is_mmp_type(gpio_type)) + irq_base = MMP_GPIO_TO_IRQ(0); +#endif + } else { use_of = 1; + } + if (!pxa_last_gpio) return -EINVAL; -- cgit v1.2.3-58-ga151 From 089d03629b04ebe8163905a2398742b426e35085 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sun, 22 Jul 2012 19:50:22 +0200 Subject: ARM: pxa: add devicetree code for irq handling Properly register on-chip interrupt using the irqdomain logic. The number of interrupts is taken from the devicetree node. That includes the following changes: - cpu_has_ipr() was converted from an inline function to a static bool variable, so it can be set using the "marvell,intc-priority" property inside the device node of the tree. - IRQ_BASE was converted from a macro to a runtime variable so that it can be initialized dynamically from the DT init code. - irq_base() now uses pxa_irq_base and just adds an offset. Hence, there are now no compile-time fixed values used in case of DT initialization. Signed-off-by: Daniel Mack Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/irq.c | 131 +++++++++++++++++++++++++++++++++++++-------- arch/arm/mach-pxa/pxa3xx.c | 17 +++++- 2 files changed, 125 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 5dae15ea6718..b6cc1816463e 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include @@ -25,8 +27,6 @@ #include "generic.h" -#define IRQ_BASE io_p2v(0x40d00000) - #define ICIP (0x000) #define ICMR (0x004) #define ICLR (0x008) @@ -48,22 +48,19 @@ * This is for peripheral IRQs internal to the PXA chip. */ +static void __iomem *pxa_irq_base; static int pxa_internal_irq_nr; - -static inline int cpu_has_ipr(void) -{ - return !cpu_is_pxa25x(); -} +static bool cpu_has_ipr; static inline void __iomem *irq_base(int i) { - static unsigned long phys_base[] = { - 0x40d00000, - 0x40d0009c, - 0x40d00130, + static unsigned long phys_base_offset[] = { + 0x0, + 0x9c, + 0x130, }; - return io_p2v(phys_base[i]); + return pxa_irq_base + phys_base_offset[i]; } void pxa_mask_irq(struct irq_data *d) @@ -96,8 +93,8 @@ asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) uint32_t icip, icmr, mask; do { - icip = __raw_readl(IRQ_BASE + ICIP); - icmr = __raw_readl(IRQ_BASE + ICMR); + icip = __raw_readl(pxa_irq_base + ICIP); + icmr = __raw_readl(pxa_irq_base + ICMR); mask = icip & icmr; if (mask == 0) @@ -128,6 +125,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) BUG_ON(irq_nr > MAX_INTERNAL_IRQS); pxa_internal_irq_nr = irq_nr; + cpu_has_ipr = !cpu_is_pxa25x(); + pxa_irq_base = io_p2v(0x40d00000); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); @@ -136,8 +135,8 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ for (i = n; (i < (n + 32)) && (i < irq_nr); i++) { /* initialize interrupt priority */ - if (cpu_has_ipr()) - __raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i)); + if (cpu_has_ipr) + __raw_writel(i | IPR_VALID, pxa_irq_base + IPR(i)); irq = PXA_IRQ(i); irq_set_chip_and_handler(irq, &pxa_internal_irq_chip, @@ -168,9 +167,9 @@ static int pxa_irq_suspend(void) __raw_writel(0, base + ICMR); } - if (cpu_has_ipr()) { + if (cpu_has_ipr) { for (i = 0; i < pxa_internal_irq_nr; i++) - saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i)); + saved_ipr[i] = __raw_readl(pxa_irq_base + IPR(i)); } return 0; @@ -187,11 +186,11 @@ static void pxa_irq_resume(void) __raw_writel(0, base + ICLR); } - if (cpu_has_ipr()) + if (cpu_has_ipr) for (i = 0; i < pxa_internal_irq_nr; i++) - __raw_writel(saved_ipr[i], IRQ_BASE + IPR(i)); + __raw_writel(saved_ipr[i], pxa_irq_base + IPR(i)); - __raw_writel(1, IRQ_BASE + ICCR); + __raw_writel(1, pxa_irq_base + ICCR); } #else #define pxa_irq_suspend NULL @@ -202,3 +201,93 @@ struct syscore_ops pxa_irq_syscore_ops = { .suspend = pxa_irq_suspend, .resume = pxa_irq_resume, }; + +#ifdef CONFIG_OF +static struct irq_domain *pxa_irq_domain; + +static int pxa_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + void __iomem *base = irq_base(hw / 32); + + /* initialize interrupt priority */ + if (cpu_has_ipr) + __raw_writel(hw | IPR_VALID, pxa_irq_base + IPR(hw)); + + irq_set_chip_and_handler(hw, &pxa_internal_irq_chip, + handle_level_irq); + irq_set_chip_data(hw, base); + set_irq_flags(hw, IRQF_VALID); + + return 0; +} + +static struct irq_domain_ops pxa_irq_ops = { + .map = pxa_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static const struct of_device_id intc_ids[] __initconst = { + { .compatible = "marvell,pxa-intc", }, + {} +}; + +void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)) +{ + struct device_node *node; + const struct of_device_id *of_id; + struct pxa_intc_conf *conf; + struct resource res; + int n, ret; + + node = of_find_matching_node(NULL, intc_ids); + if (!node) { + pr_err("Failed to find interrupt controller in arch-pxa\n"); + return; + } + of_id = of_match_node(intc_ids, node); + conf = of_id->data; + + ret = of_property_read_u32(node, "marvell,intc-nr-irqs", + &pxa_internal_irq_nr); + if (ret) { + pr_err("Not found marvell,intc-nr-irqs property\n"); + return; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret < 0) { + pr_err("No registers defined for node\n"); + return; + } + pxa_irq_base = io_p2v(res.start); + + if (of_find_property(node, "marvell,intc-priority", NULL)) + cpu_has_ipr = 1; + + ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0); + if (ret < 0) { + pr_err("Failed to allocate IRQ numbers\n"); + return; + } + + pxa_irq_domain = irq_domain_add_legacy(node, pxa_internal_irq_nr, 0, 0, + &pxa_irq_ops, NULL); + if (!pxa_irq_domain) + panic("Unable to add PXA IRQ domain\n"); + + irq_set_default_host(pxa_irq_domain); + + for (n = 0; n < pxa_internal_irq_nr; n += 32) { + void __iomem *base = irq_base(n >> 5); + + __raw_writel(0, base + ICMR); /* disable all IRQs */ + __raw_writel(0, base + ICLR); /* all IRQs are IRQ, not FIQ */ + } + + /* only unmasked interrupts kick us out of idle */ + __raw_writel(1, irq_base(0) + ICCR); + + pxa_internal_irq_chip.irq_set_wake = fn; +} +#endif /* CONFIG_OF */ diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index dffb7e813d98..1827d3ce2d5b 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -40,6 +40,8 @@ #define PECR_IE(n) ((1 << ((n) * 2)) << 28) #define PECR_IS(n) ((1 << ((n) * 2)) << 29) +extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); + static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1); static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1); static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1); @@ -382,7 +384,7 @@ static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *, pxa_ext_wakeup_chip.irq_set_wake = fn; } -void __init pxa3xx_init_irq(void) +static void __init __pxa3xx_init_irq(void) { /* enable CP6 access */ u32 value; @@ -390,10 +392,21 @@ void __init pxa3xx_init_irq(void) value |= (1 << 6); __asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value)); - pxa_init_irq(56, pxa3xx_set_wake); pxa_init_ext_wakeup_irq(pxa3xx_set_wake); } +void __init pxa3xx_init_irq(void) +{ + __pxa3xx_init_irq(); + pxa_init_irq(56, pxa3xx_set_wake); +} + +void __init pxa3xx_dt_init_irq(void) +{ + __pxa3xx_init_irq(); + pxa_dt_irq_init(pxa3xx_set_wake); +} + static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ .virtual = (unsigned long)SMEMC_VIRT, -- cgit v1.2.3-58-ga151 From 82ce44d104dc97f4f7fbd035ca34f723f0fb7287 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Jul 2012 17:52:52 +0200 Subject: ARM: pxa3xx: skip default device initialization when booting via DT When booting via DT, the default PXA devices must not have been probed before, otherwise the augmented information from the device tree is ignored. Signed-off-by: Daniel Mack Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/pxa3xx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1827d3ce2d5b..4a9d04a57de5 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -479,7 +480,8 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa3xx_mfp_syscore_ops); register_syscore_ops(&pxa3xx_clock_syscore_ops); - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (!of_have_populated_dt()) + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } return ret; -- cgit v1.2.3-58-ga151 From e7749a266bb3d0334887b2cf4e24de410e70c57a Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Jul 2012 17:54:41 +0200 Subject: ARM: pxa3xx: add generic DT machine code Add a DT_MACHINE_START entry for PXA3xx machines and a auxdata table for some of the devices. This file can be extended to also support pxa2xx and pxa9xx boards. Signed-off-by: Daniel Mack Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/Kconfig | 12 +++++++++ arch/arm/mach-pxa/Makefile | 3 +++ arch/arm/mach-pxa/pxa-dt.c | 63 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 78 insertions(+) create mode 100644 arch/arm/mach-pxa/pxa-dt.c diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index fe2d1f80ef50..8e6288de69b9 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -25,6 +25,18 @@ config PXA_V7_MACH_AUTO if !ARCH_PXA_V7 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" +config MACH_PXA3XX_DT + bool "Support PXA3xx platforms from device tree" + select PXA3xx + select CPU_PXA300 + select POWER_SUPPLY + select HAVE_PWM + select USE_OF + help + Include support for Marvell PXA3xx based platforms using + the device tree. Needn't select any other machine while + MACH_PXA3XX_DT is enabled. + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select PXA25x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index be0f7df8685c..2bedc9ed076c 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -26,6 +26,9 @@ obj-$(CONFIG_CPU_PXA930) += pxa930.o # NOTE: keep the order of boards in accordance to their order in Kconfig +# Device Tree support +obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o + # Intel/Marvell Dev Platforms obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c new file mode 100644 index 000000000000..c9192cea0033 --- /dev/null +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -0,0 +1,63 @@ +/* + * linux/arch/arm/mach-pxa/pxa-dt.c + * + * Copyright (C) 2012 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" + +#ifdef CONFIG_PXA3xx +extern void __init pxa3xx_dt_init_irq(void); + +static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL), + OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL), + OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL), + OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL), + OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL), + OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL), + OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL), + OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL), + OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL), + OF_DEV_AUXDATA("marvell,pxa3xx-nand", 0x43100000, "pxa3xx-nand", NULL), + {} +}; + +static void __init pxa3xx_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + pxa3xx_auxdata_lookup, NULL); +} + +static const char *pxa3xx_dt_board_compat[] __initdata = { + "marvell,pxa300", + "marvell,pxa310", + "marvell,pxa320", + NULL, +}; +#endif + +#ifdef CONFIG_PXA3xx +DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)") + .map_io = pxa3xx_map_io, + .init_irq = pxa3xx_dt_init_irq, + .handle_irq = pxa3xx_handle_irq, + .timer = &pxa_timer, + .restart = pxa_restart, + .init_machine = pxa3xx_dt_init, + .dt_compat = pxa3xx_dt_board_compat, +MACHINE_END +#endif -- cgit v1.2.3-58-ga151 From aff18a67078e61088ea05efa6d077ffb838786e9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 Jul 2012 17:56:48 +0200 Subject: ARM: pxa: add .dtsi files This adds .dtsi files to describe the PXA SoCs. pxa3xx simply augments pxa2xx. Not all devices are listed yet, and it will need some time to get all the drivers ported. For now, pxa27x.dtsi only enables the PXA's interrupt priority feature. Signed-off-by: Daniel Mack Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- arch/arm/boot/dts/pxa27x.dtsi | 14 +++++ arch/arm/boot/dts/pxa2xx.dtsi | 132 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/pxa3xx.dtsi | 32 ++++++++++ 3 files changed, 178 insertions(+) create mode 100644 arch/arm/boot/dts/pxa27x.dtsi create mode 100644 arch/arm/boot/dts/pxa2xx.dtsi create mode 100644 arch/arm/boot/dts/pxa3xx.dtsi diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi new file mode 100644 index 000000000000..d7c5d721a5c7 --- /dev/null +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -0,0 +1,14 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA27x familiy SoC"; + compatible = "marvell,pxa27x"; + + pxabus { + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <34>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi new file mode 100644 index 000000000000..f18aad35e8b3 --- /dev/null +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -0,0 +1,132 @@ +/* + * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC + * + * Copyright (C) 2011 Marek Vasut + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell PXA2xx family SoC"; + compatible = "marvell,pxa2xx"; + interrupt-parent = <&pxairq>; + + aliases { + serial0 = &ffuart; + serial1 = &btuart; + serial2 = &stuart; + serial3 = &hwuart; + i2c0 = &pwri2c; + i2c1 = &pxai2c1; + }; + + cpus { + cpu@0 { + compatible = "arm,xscale"; + }; + }; + + pxabus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxairq: interrupt-controller@40d00000 { + #interrupt-cells = <1>; + compatible = "marvell,pxa-intc"; + interrupt-controller; + interrupt-parent; + marvell,intc-nr-irqs = <32>; + reg = <0x40d00000 0xd0>; + }; + + gpio: gpio@40e00000 { + compatible = "mrvl,pxa-gpio"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x40e00000 0x10000>; + gpio-controller; + #gpio-cells = <0x2>; + interrupts = <10>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <0x2>; + ranges; + + gcb0: gpio@40e00000 { + reg = <0x40e00000 0x4>; + }; + + gcb1: gpio@40e00004 { + reg = <0x40e00004 0x4>; + }; + + gcb2: gpio@40e00008 { + reg = <0x40e00008 0x4>; + }; + gcb3: gpio@40e0000c { + reg = <0x40e0000c 0x4>; + }; + }; + + ffuart: uart@40100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40100000 0x30>; + interrupts = <22>; + status = "disabled"; + }; + + btuart: uart@40200000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40200000 0x30>; + interrupts = <21>; + status = "disabled"; + }; + + stuart: uart@40700000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40700000 0x30>; + interrupts = <20>; + status = "disabled"; + }; + + hwuart: uart@41100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x41100000 0x30>; + interrupts = <7>; + status = "disabled"; + }; + + pxai2c1: i2c@40301680 { + compatible = "mrvl,pxa-i2c"; + reg = <0x40301680 0x30>; + interrupts = <18>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb0: ohci@4c000000 { + compatible = "mrvl,pxa-ohci"; + reg = <0x4c000000 0x10000>; + interrupts = <3>; + status = "disabled"; + }; + + mmc0: mmc@41100000 { + compatible = "mrvl,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + status = "disabled"; + }; + + rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi new file mode 100644 index 000000000000..f9d92da86783 --- /dev/null +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -0,0 +1,32 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA3xx familiy SoC"; + compatible = "marvell,pxa3xx"; + + pxabus { + pwri2c: i2c@40f500c0 { + compatible = "mrvl,pwri2c"; + reg = <0x40f500c0 0x30>; + interrupts = <6>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <56>; + }; + }; +}; -- cgit v1.2.3-58-ga151 From cd0a4a9503345c7076978ecc81c38a1c61730bfe Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:08 +0800 Subject: ARM: pxa: support CKENC in clk_enable Since more device clock is supported in PXA95x, add CKENC support. Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/clock-pxa3xx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c index 2a37a9a8f621..d4e9499832dc 100644 --- a/arch/arm/mach-pxa/clock-pxa3xx.c +++ b/arch/arm/mach-pxa/clock-pxa3xx.c @@ -127,8 +127,10 @@ void clk_pxa3xx_cken_enable(struct clk *clk) if (clk->cken < 32) CKENA |= mask; - else + else if (clk->cken < 64) CKENB |= mask; + else + CKENC |= mask; } void clk_pxa3xx_cken_disable(struct clk *clk) @@ -137,8 +139,10 @@ void clk_pxa3xx_cken_disable(struct clk *clk) if (clk->cken < 32) CKENA &= ~mask; - else + else if (clk->cken < 64) CKENB &= ~mask; + else + CKENC &= ~mask; } const struct clkops clk_pxa3xx_cken_ops = { -- cgit v1.2.3-58-ga151 From 0d2ee5d773c209504db643ec4d4b9f3624a6663f Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:09 +0800 Subject: gpio: pxa: add chain_eneter and chain_exit for irq handler Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- drivers/gpio/gpio-pxa.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 6d0cb9dff27d..db5c2958f973 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -26,6 +26,8 @@ #include #include +#include + #include /* @@ -331,6 +333,9 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) struct pxa_gpio_chip *c; int loop, gpio, gpio_base, n; unsigned long gedr; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); do { loop = 0; @@ -350,6 +355,8 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) } } } while (loop); + + chained_irq_exit(chip, desc); } static void pxa_ack_muxed_gpio(struct irq_data *d) -- cgit v1.2.3-58-ga151 From 5967b546dd7142e7747993bb4c79422cd7b6f34f Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:10 +0800 Subject: ARM: cache: fix uninitialized ptr in tauros2_init init the variable "mode" to NULL to ensure the later NULL checking is taking effect. Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- arch/arm/mm/cache-tauros2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 23a7643e9a87..97e2ac81399f 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -192,7 +192,7 @@ static inline void __init write_actlr(u32 actlr) void __init tauros2_init(void) { extern int processor_id; - char *mode; + char *mode = NULL; disable_l2_prefetch(); -- cgit v1.2.3-58-ga151 From fa79b8d6a2f38bf2c612acf38787a7fcf60c5db7 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:11 +0800 Subject: ARM: cache: add cputype.h for tauros2 Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- arch/arm/mm/cache-tauros2.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 97e2ac81399f..4b787bba2b58 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -161,8 +162,6 @@ static void __init disable_l2_prefetch(void) static inline int __init cpuid_scheme(void) { - extern int processor_id; - return !!((processor_id & 0x000f0000) == 0x000f0000); } @@ -191,7 +190,6 @@ static inline void __init write_actlr(u32 actlr) void __init tauros2_init(void) { - extern int processor_id; char *mode = NULL; disable_l2_prefetch(); -- cgit v1.2.3-58-ga151 From 38f2e3772429f29a273a2ed7e95dd7a41f662f06 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:12 +0800 Subject: ARM: cache: add extra feature enable for tauros2 The extra feature may be used by SOCs are prefetch, burst8, write buffer coalesce Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- arch/arm/include/asm/hardware/cache-tauros2.h | 5 ++- arch/arm/mm/cache-tauros2.c | 44 ++++++++++++++++----------- 2 files changed, 31 insertions(+), 18 deletions(-) diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h index 538f17ca905b..295e2e40151b 100644 --- a/arch/arm/include/asm/hardware/cache-tauros2.h +++ b/arch/arm/include/asm/hardware/cache-tauros2.h @@ -8,4 +8,7 @@ * warranty of any kind, whether express or implied. */ -extern void __init tauros2_init(void); +#define CACHE_TAUROS2_PREFETCH_ON (1 << 0) +#define CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1) + +extern void __init tauros2_init(unsigned int features); diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index 4b787bba2b58..e9f054fc7e87 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -145,21 +145,6 @@ static inline void __init write_extra_features(u32 u) __asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u)); } -static void __init disable_l2_prefetch(void) -{ - u32 u; - - /* - * Read the CPU Extra Features register and verify that the - * Disable L2 Prefetch bit is set. - */ - u = read_extra_features(); - if (!(u & 0x01000000)) { - printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n"); - write_extra_features(u | 0x01000000); - } -} - static inline int __init cpuid_scheme(void) { return !!((processor_id & 0x000f0000) == 0x000f0000); @@ -188,11 +173,36 @@ static inline void __init write_actlr(u32 actlr) __asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr)); } -void __init tauros2_init(void) +static void enable_extra_feature(unsigned int features) +{ + u32 u; + + u = read_extra_features(); + + if (features & CACHE_TAUROS2_PREFETCH_ON) + u &= ~0x01000000; + else + u |= 0x01000000; + printk(KERN_INFO "Tauros2: %s L2 prefetch.\n", + (features & CACHE_TAUROS2_PREFETCH_ON) + ? "Enabling" : "Disabling"); + + if (features & CACHE_TAUROS2_LINEFILL_BURST8) + u |= 0x00100000; + else + u &= ~0x00100000; + printk(KERN_INFO "Tauros2: %s line fill burt8.\n", + (features & CACHE_TAUROS2_LINEFILL_BURST8) + ? "Enabling" : "Disabling"); + + write_extra_features(u); +} + +void __init tauros2_init(unsigned int features) { char *mode = NULL; - disable_l2_prefetch(); + enable_extra_feature(features); #ifdef CONFIG_CPU_32v5 if ((processor_id & 0xff0f0000) == 0x56050000) { -- cgit v1.2.3-58-ga151 From 5cc5815795379690a07d8226fda24ba2fc3f1339 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:13 +0800 Subject: ARM: mmp&dove: modify tauros2_init call The tauros2_init has argument, change the calling of tauros2_init to support argument. Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- arch/arm/mach-dove/common.c | 2 +- arch/arm/mach-mmp/mmp2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7..db399dfbe905 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -288,7 +288,7 @@ void __init dove_init(void) printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif dove_setup_cpu_mbus(); diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index c709a24a9d25..c2bb95cf1a82 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -163,7 +163,7 @@ static int __init mmp2_init(void) { if (cpu_is_mmp2()) { #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(mmp2_addr_map); -- cgit v1.2.3-58-ga151 From c2b7e05c753156dfba3240c59c400d557c5c8746 Mon Sep 17 00:00:00 2001 From: Chao Xie Date: Tue, 31 Jul 2012 14:13:14 +0800 Subject: ARM: cache: add dt support for tauros2 cache Signed-off-by: Chao Xie Signed-off-by: Haojian Zhuang --- .../devicetree/bindings/arm/mrvl/tauros2.txt | 17 +++++++++++ arch/arm/mm/cache-tauros2.c | 35 +++++++++++++++++++++- 2 files changed, 51 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/mrvl/tauros2.txt diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt new file mode 100644 index 000000000000..31af1cbb60bd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt @@ -0,0 +1,17 @@ +* Marvell Tauros2 Cache + +Required properties: +- compatible : Should be "marvell,tauros2-cache". +- marvell,tauros2-cache-features : Specify the features supported for the + tauros2 cache. + The features including + CACHE_TAUROS2_PREFETCH_ON (1 << 0) + CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1) + The definition can be found at + arch/arm/include/asm/hardware/cache-tauros2.h + +Example: + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c index e9f054fc7e87..1be0f4e5e6eb 100644 --- a/arch/arm/mm/cache-tauros2.c +++ b/arch/arm/mm/cache-tauros2.c @@ -15,6 +15,8 @@ */ #include +#include +#include #include #include #include @@ -198,7 +200,7 @@ static void enable_extra_feature(unsigned int features) write_extra_features(u); } -void __init tauros2_init(unsigned int features) +static void __init tauros2_internal_init(unsigned int features) { char *mode = NULL; @@ -294,3 +296,34 @@ void __init tauros2_init(unsigned int features) printk(KERN_INFO "Tauros2: L2 cache support initialised " "in %s mode.\n", mode); } + +#ifdef CONFIG_OF +static const struct of_device_id tauros2_ids[] __initconst = { + { .compatible = "marvell,tauros2-cache"}, + {} +}; +#endif + +void __init tauros2_init(unsigned int features) +{ +#ifdef CONFIG_OF + struct device_node *node; + int ret; + unsigned int f; + + node = of_find_matching_node(NULL, tauros2_ids); + if (!node) { + pr_info("Not found marvell,tauros2-cache, disable it\n"); + return; + } + + ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f); + if (ret) { + pr_info("Not found marvell,tauros-cache-features property, " + "disable extra features\n"); + features = 0; + } else + features = f; +#endif + tauros2_internal_init(features); +} -- cgit v1.2.3-58-ga151 From a03d8b1e4606be10c0fedf1ccabe22dc3a5060f9 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Sat, 4 Aug 2012 23:57:38 +0800 Subject: ARM: mmp: enable tauros2 cache in pxa910 Signed-off-by: Haojian Zhuang --- arch/arm/boot/dts/pxa910.dtsi | 5 +++++ arch/arm/mach-mmp/pxa910.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index aebf32de73b4..a3be44d86bcd 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -25,6 +25,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 6da52e9f2bdc..51ac8d1898c1 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include @@ -116,6 +117,9 @@ static struct clk_lookup pxa910_clkregs[] = { static int __init pxa910_init(void) { if (cpu_is_pxa910()) { +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(0); +#endif mfp_init_base(MFPR_VIRT_BASE); mfp_init_addr(pxa910_mfp_addr_map); pxa_init_dma(IRQ_PXA910_DMA_INT0, 32); -- cgit v1.2.3-58-ga151 From 51931b37fcb17a2f48f726fd21b88e3af770ddc2 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Sun, 5 Aug 2012 10:28:30 +0800 Subject: ARM: mmp: enable tauros2 cache in mmp2 dt Signed-off-by: Haojian Zhuang --- arch/arm/boot/dts/mmp2.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 80f74e256408..0514fb41627e 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -26,6 +26,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-58-ga151 From 98916a2fbc4f9b7bf85d9c4d2f9aa301c1f71259 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 16:33:44 -0300 Subject: ARM: imx23-olinuxino.dts: Add AUART0 support Add AUART0 support. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 6 ++++++ arch/arm/boot/dts/imx23.dtsi | 11 +++++++++++ 2 files changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 20912b1d8893..a28687303e49 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -39,6 +39,12 @@ pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index e6138310e5ce..9700872794d0 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -140,6 +140,17 @@ fsl,pull-up = <0>; }; + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */ + 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < -- cgit v1.2.3-58-ga151 From e317317a7148fce681166a5ab01f36a1844254c7 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Wed, 1 Aug 2012 11:20:16 +0800 Subject: ARM: mx28evk: add missed clkmux select for saif Added missed clkmux setting for mx28evk. Cc: Mark Brown Cc: Liam Girdwood Cc: Wolfram Sang Signed-off-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8dabfe81d07c..02d1ab2a27f2 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -24,6 +24,7 @@ #include #include #include +#include static struct fb_videomode mx23evk_video_modes[] = { { @@ -237,6 +238,8 @@ static void __init imx28_evk_init(void) mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes); mxsfb_pdata.default_bpp = 32; mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; + + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } static void __init m28evk_init(void) -- cgit v1.2.3-58-ga151 From 58a8c59e1c15eb9901a14c0750a2012b109a5e4f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Aug 2012 11:29:00 -0300 Subject: ARM: mach-mxs: Remove board entries in dt_board_compat There is no need for adding board related entries into dt_board_compat. Leave only the SoC entry. This way we do not need to patch a C file when adding dt support for a new board. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 02d1ab2a27f2..ceb739844780 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -289,19 +289,11 @@ static void __init mxs_machine_init(void) } static const char *imx23_dt_compat[] __initdata = { - "fsl,imx23-evk", - "fsl,stmp378x_devb" - "olimex,imx23-olinuxino", "fsl,imx23", NULL, }; static const char *imx28_dt_compat[] __initdata = { - "bluegiga,apx4devkit", - "crystalfontz,cfa10036", - "denx,m28evk", - "fsl,imx28-evk", - "karo,tx28", "fsl,imx28", NULL, }; -- cgit v1.2.3-58-ga151 From aef35104a9e5b8555cdaeebd4563df9921f6d605 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 Aug 2012 10:42:52 +0800 Subject: ARM: dts: imx28: Add compatible and interrupt for LRADC Signed-off-by: Marek Vasut Cc: Jonathan Cameron Cc: Juergen Beisert Cc: Lars-Peter Clausen Cc: Wolfgang Denk Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3fa6d190fab4..e2240da7ba95 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -638,7 +638,10 @@ }; lradc@80050000 { + compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; status = "disabled"; }; -- cgit v1.2.3-58-ga151 From 2c7c2c1d01a2559d452c0f0aa5e6f6ca2643e6b1 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 13 Jul 2012 14:15:34 +0800 Subject: ARM: mxs: tx28: reset fec phy for device tree boot MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For non-DT boot, function tx28_add_fec0 configures all ENET0 pins into gpio mode for resetting fec phy, and then reconfigures those pins into ENET function after that. For DT boot, all the pin configuration is done by pinctrl subsystem. Ideally, when gpio_request gets called, GPIO subsystem should call pinctrl to configure pins into gpio mode automatically, and have pins freed up from pinctrl subsystem when gpio_free is called. But right now, this cooperation between gpio and pinctrl hasn't been available. As the result, we have to explicitly call pinctrl_get_select and pinctrl_put for device tree boot. Signed-off-by: Shawn Guo Acked-by: Lothar Waßmann --- arch/arm/boot/dts/imx28-tx28.dts | 21 +++++++++- arch/arm/mach-mxs/mach-mxs.c | 82 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 101 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 62bf767409a6..a56ae05f9fa9 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -34,6 +34,24 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + mac0_pins_gpio: mac0-gpio-mode@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */ + 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */ + 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */ + 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */ + 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */ + 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */ + 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */ + 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */ + 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; }; @@ -72,8 +90,9 @@ ahb@80080000 { mac0: ethernet@800f0000 { phy-mode = "rmii"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio_mode"; pinctrl-0 = <&mac0_pins_a>; + pinctrl-1 = <&mac0_pins_gpio>; status = "okay"; }; }; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index ceb739844780..8378fe5cfaf5 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -12,8 +12,9 @@ #include #include +#include #include -#include +#include #include #include #include @@ -21,10 +22,12 @@ #include #include #include +#include #include #include #include #include +#include static struct fb_videomode mx23evk_video_modes[] = { { @@ -273,6 +276,80 @@ static void __init apx4devkit_init(void) mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT; } +#define ENET0_MDC__GPIO_4_0 MXS_GPIO_NR(4, 0) +#define ENET0_MDIO__GPIO_4_1 MXS_GPIO_NR(4, 1) +#define ENET0_RX_EN__GPIO_4_2 MXS_GPIO_NR(4, 2) +#define ENET0_RXD0__GPIO_4_3 MXS_GPIO_NR(4, 3) +#define ENET0_RXD1__GPIO_4_4 MXS_GPIO_NR(4, 4) +#define ENET0_TX_EN__GPIO_4_6 MXS_GPIO_NR(4, 6) +#define ENET0_TXD0__GPIO_4_7 MXS_GPIO_NR(4, 7) +#define ENET0_TXD1__GPIO_4_8 MXS_GPIO_NR(4, 8) +#define ENET_CLK__GPIO_4_16 MXS_GPIO_NR(4, 16) + +#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) +#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) +#define TX28_FEC_nINT MXS_GPIO_NR(4, 5) + +static const struct gpio tx28_gpios[] __initconst = { + { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" }, + { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" }, + { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" }, + { ENET0_RXD0__GPIO_4_3, GPIOF_OUT_INIT_LOW, "GPIO_4_3" }, + { ENET0_RXD1__GPIO_4_4, GPIOF_OUT_INIT_LOW, "GPIO_4_4" }, + { ENET0_TX_EN__GPIO_4_6, GPIOF_OUT_INIT_LOW, "GPIO_4_6" }, + { ENET0_TXD0__GPIO_4_7, GPIOF_OUT_INIT_LOW, "GPIO_4_7" }, + { ENET0_TXD1__GPIO_4_8, GPIOF_OUT_INIT_LOW, "GPIO_4_8" }, + { ENET_CLK__GPIO_4_16, GPIOF_OUT_INIT_LOW, "GPIO_4_16" }, + { TX28_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, + { TX28_FEC_PHY_RESET, GPIOF_OUT_INIT_LOW, "fec-phy-reset" }, + { TX28_FEC_nINT, GPIOF_DIR_IN, "fec-int" }, +}; + +static void __init tx28_post_init(void) +{ + struct device_node *np; + struct platform_device *pdev; + struct pinctrl *pctl; + int ret; + + enable_clk_enet_out(); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-fec"); + pdev = of_find_device_by_node(np); + if (!pdev) { + pr_err("%s: failed to find fec device\n", __func__); + return; + } + + pctl = pinctrl_get_select(&pdev->dev, "gpio_mode"); + if (IS_ERR(pctl)) { + pr_err("%s: failed to get pinctrl state\n", __func__); + return; + } + + ret = gpio_request_array(tx28_gpios, ARRAY_SIZE(tx28_gpios)); + if (ret) { + pr_err("%s: failed to request gpios: %d\n", __func__, ret); + return; + } + + /* Power up fec phy */ + gpio_set_value(TX28_FEC_PHY_POWER, 1); + msleep(26); /* 25ms according to data sheet */ + + /* Mode strap pins */ + gpio_set_value(ENET0_RX_EN__GPIO_4_2, 1); + gpio_set_value(ENET0_RXD0__GPIO_4_3, 1); + gpio_set_value(ENET0_RXD1__GPIO_4_4, 1); + + udelay(100); /* minimum assertion time for nRST */ + + /* Deasserting FEC PHY RESET */ + gpio_set_value(TX28_FEC_PHY_RESET, 1); + + pinctrl_put(pctl); +} + static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) @@ -286,6 +363,9 @@ static void __init mxs_machine_init(void) of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); + + if (of_machine_is_compatible("karo,tx28")) + tx28_post_init(); } static const char *imx23_dt_compat[] __initdata = { -- cgit v1.2.3-58-ga151 From 44ffb78fe03e1302dacbc681027ca611f7fcf4c2 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 22:00:45 +0800 Subject: ARM: mxs: use auxdata to pass flexcan_switch function hook There are some efforts going on to have flexcan_switch function implemented in flexcan driver, so that this platform function hook can be saved for device tree boot. But due to the mx28evk board design oddness that two flexcan transceivers share one switch gpio, we have to come up a separate and generic gpio-switch driver to handle all these gpio switch use cases. Before that happens, we choose to use auxdata to pass flexcan_switch function hook, so that the DT conversion is not blocked there. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 8378fe5cfaf5..3b0d9c64c235 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -12,6 +12,7 @@ #include #include +#include #include #include #include @@ -103,9 +104,40 @@ static struct fb_videomode apx4devkit_video_modes[] = { static struct mxsfb_platform_data mxsfb_pdata __initdata; +/* + * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers + */ +#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) + +static int flexcan0_en, flexcan1_en; + +static void mx28evk_flexcan_switch(void) +{ + if (flexcan0_en || flexcan1_en) + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); + else + gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); +} + +static void mx28evk_flexcan0_switch(int enable) +{ + flexcan0_en = enable; + mx28evk_flexcan_switch(); +} + +static void mx28evk_flexcan1_switch(int enable) +{ + flexcan1_en = enable; + mx28evk_flexcan_switch(); +} + +static struct flexcan_platform_data flexcan_pdata[2]; + static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata), OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata), + OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80032000, NULL, &flexcan_pdata[0]), + OF_DEV_AUXDATA("fsl,imx28-flexcan", 0x80034000, NULL, &flexcan_pdata[1]), { /* sentinel */ } }; @@ -245,6 +277,15 @@ static void __init imx28_evk_init(void) mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); } +static void __init imx28_evk_post_init(void) +{ + if (!gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, + "flexcan-switch")) { + flexcan_pdata[0].transceiver_switch = mx28evk_flexcan0_switch; + flexcan_pdata[1].transceiver_switch = mx28evk_flexcan1_switch; + } +} + static void __init m28evk_init(void) { enable_clk_enet_out(); @@ -366,6 +407,9 @@ static void __init mxs_machine_init(void) if (of_machine_is_compatible("karo,tx28")) tx28_post_init(); + + if (of_machine_is_compatible("fsl,imx28-evk")) + imx28_evk_post_init(); } static const char *imx23_dt_compat[] __initdata = { -- cgit v1.2.3-58-ga151 From ab9aad57f1fdfaefce1b34b69e069be51d5aa42b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 22:27:40 +0800 Subject: ARM: mxs: remove board files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since DT kernel provides the equivalent support with those board files, we can remove them now. Signed-off-by: Shawn Guo Cc: Lothar Waßmann Cc: Marek Vasut Cc: Lauri Hintsala --- arch/arm/configs/mxs_defconfig | 6 - arch/arm/mach-mxs/Kconfig | 87 ------ arch/arm/mach-mxs/Makefile | 7 - arch/arm/mach-mxs/mach-apx4devkit.c | 273 ------------------- arch/arm/mach-mxs/mach-m28evk.c | 366 ------------------------- arch/arm/mach-mxs/mach-mx23evk.c | 190 ------------- arch/arm/mach-mxs/mach-mx28evk.c | 477 --------------------------------- arch/arm/mach-mxs/mach-stmp378x_devb.c | 123 --------- arch/arm/mach-mxs/mach-tx28.c | 184 ------------- arch/arm/mach-mxs/module-tx28.c | 160 ----------- arch/arm/mach-mxs/module-tx28.h | 10 - 11 files changed, 1883 deletions(-) delete mode 100644 arch/arm/mach-mxs/mach-apx4devkit.c delete mode 100644 arch/arm/mach-mxs/mach-m28evk.c delete mode 100644 arch/arm/mach-mxs/mach-mx23evk.c delete mode 100644 arch/arm/mach-mxs/mach-mx28evk.c delete mode 100644 arch/arm/mach-mxs/mach-stmp378x_devb.c delete mode 100644 arch/arm/mach-mxs/mach-tx28.c delete mode 100644 arch/arm/mach-mxs/module-tx28.c delete mode 100644 arch/arm/mach-mxs/module-tx28.h diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 4edcfb4e4dee..36d60dda310c 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y CONFIG_MACH_MXS_DT=y -CONFIG_MACH_MX23EVK=y -CONFIG_MACH_MX28EVK=y -CONFIG_MACH_STMP378X_DEVB=y -CONFIG_MACH_TX28=y -CONFIG_MACH_M28EVK=y -CONFIG_MACH_APX4DEVKIT=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 9a8bbda195b2..2e6cb6d8604f 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -27,91 +27,4 @@ config MACH_MXS_DT Include support for Freescale MXS platforms(i.MX23 and i.MX28) using the device tree for discovery -config MACH_STMP378X_DEVB - bool "Support STMP378x_devb Platform" - select SOC_IMX23 - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for STMP378x-devb platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX23EVK - bool "Support MX23EVK Platform" - select SOC_IMX23 - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for MX23EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX28EVK - bool "Support MX28EVK Platform" - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_FLEXCAN - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - select MXS_HAVE_PLATFORM_MXS_SAIF - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - help - Include support for MX28EVK platform. This includes specific - configurations for the board and its peripherals. - -config MODULE_TX28 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXS_PWM - select MXS_HAVE_PLATFORM_RTC_STMP3XXX - -config MODULE_M28 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_FLEXCAN - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXSFB - -config MODULE_APX4 - bool - select SOC_IMX28 - select LEDS_GPIO_REGISTER - select MXS_HAVE_AMBA_DUART - select MXS_HAVE_PLATFORM_AUART - select MXS_HAVE_PLATFORM_FEC - select MXS_HAVE_PLATFORM_MXS_I2C - select MXS_HAVE_PLATFORM_MXS_MMC - select MXS_HAVE_PLATFORM_MXS_SAIF - -config MACH_TX28 - bool "Ka-Ro TX28 module" - select MODULE_TX28 - -config MACH_M28EVK - bool "Support DENX M28EVK Platform" - select MODULE_M28 - -config MACH_APX4DEVKIT - bool "Support Bluegiga APX4 Development Kit" - select MODULE_APX4 - endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index fed3695a1339..a7ace243cfcc 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -4,12 +4,5 @@ obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o -obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o -obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o -obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o -obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o -obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o -obj-$(CONFIG_MODULE_TX28) += module-tx28.o -obj-$(CONFIG_MACH_TX28) += mach-tx28.o obj-y += devices/ diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c deleted file mode 100644 index f5f061757deb..000000000000 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Copyright (C) 2011-2012 - * Lauri Hintsala, Bluegiga, - * Veli-Pekka Peltola, Bluegiga, - * - * based on: mach-mx28evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-mx28.h" - -#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) - -static const iomux_cfg_t apx4devkit_pads[] __initconst = { - /* duart */ - MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, - - /* auart1 */ - MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, - MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, - - /* auart2 */ - MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, - - /* auart3 */ - MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - - /* i2c */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, - - /* saif0 & saif1 */ - MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), -}; - -/* led */ -static const struct gpio_led apx4devkit_leds[] __initconst = { - { - .name = "user-led", - .default_trigger = "heartbeat", - .gpio = APX4DEVKIT_GPIO_USERLED, - }, -}; - -static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { - .leds = apx4devkit_leds, - .num_leds = ARRAY_SIZE(apx4devkit_leds), -}; - -static const struct fec_platform_data mx28_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - -static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { - { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ - { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ - defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("VDDA", "0-000a"), - REGULATOR_SUPPLY("VDDIO", "0-000a"), -}; - -static struct regulator_init_data apx4devkit_vdd_reg_init_data = { - .constraints = { - .name = "3V3", - .always_on = 1, - }, - .consumer_supplies = apx4devkit_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), -}; - -static struct fixed_voltage_config apx4devkit_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &apx4devkit_vdd_reg_init_data, -}; - -static struct platform_device apx4devkit_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &apx4devkit_vdd_pdata, - }, -}; - -static void __init apx4devkit_add_regulators(void) -{ - platform_device_register(&apx4devkit_voltage_regulator); -} -#else -static void __init apx4devkit_add_regulators(void) {} -#endif - -static const struct mxs_saif_platform_data - apx4devkit_mxs_saif_pdata[] __initconst = { - /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ - { - .master_mode = 1, - .master_id = 0, - }, { - .master_mode = 0, - .master_id = 0, - }, -}; - -static int apx4devkit_phy_fixup(struct phy_device *phy) -{ - phy->dev_flags |= MICREL_PHY_50MHZ_CLK; - return 0; -} - -static void __init apx4devkit_fec_phy_clk_enable(void) -{ - struct clk *clk; - - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); -} - -static void __init apx4devkit_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(apx4devkit_pads, - ARRAY_SIZE(apx4devkit_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart1(); - mx28_add_auart2(); - mx28_add_auart3(); - - /* - * Register fixup for the Micrel KS8031 PHY clock - * (shares same ID with KS8051) - */ - phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, - apx4devkit_phy_fixup); - - apx4devkit_fec_phy_clk_enable(); - mx28_add_fec(0, &mx28_fec_pdata); - - mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); - - gpio_led_register_device(0, &apx4devkit_led_data); - - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); - mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); - mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); - - apx4devkit_add_regulators(); - - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, apx4devkit_i2c_boardinfo, - ARRAY_SIZE(apx4devkit_i2c_boardinfo)); - - mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); -} - -static void __init apx4devkit_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer apx4devkit_timer = { - .init = apx4devkit_timer_init, -}; - -MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &apx4devkit_timer, - .init_machine = apx4devkit_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c deleted file mode 100644 index 4c00c879b893..000000000000 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, - * - * based on: mach-mx28_evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx28.h" - -#define M28EVK_GPIO_USERLED1 MXS_GPIO_NR(3, 16) -#define M28EVK_GPIO_USERLED2 MXS_GPIO_NR(3, 17) - -#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) -#define M28EVK_LCD_ENABLE MXS_GPIO_NR(3, 28) - -#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) -#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) - -static const iomux_cfg_t m28evk_pads[] __initconst = { - /* duart */ - MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - - /* auart3 */ - MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, - MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, - - /* flexcan0 */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - - /* flexcan1 */ - MX28_PAD_GPMI_CE2N__CAN1_TX, - MX28_PAD_GPMI_CE3N__CAN1_RX, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* mxsfb (lcdif) */ - MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, - MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, - MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, - MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, - MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, - MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, - MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, - MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, - MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, - MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, - MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, - MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, - MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, - MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, - MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, - MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, - - MX28_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL, - - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* mmc1 */ - MX28_PAD_GPMI_D00__SSP1_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D01__SSP1_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D02__SSP1_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D03__SSP1_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D04__SSP1_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D05__SSP1_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D06__SSP1_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D07__SSP1_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY1__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_WRN__SSP1_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_GPMI_RESETN__GPIO_0_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM4__GPIO_3_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL, - MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL, - - /* nand */ - MX28_PAD_GPMI_D00__GPMI_D0 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D01__GPMI_D1 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D02__GPMI_D2 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D03__GPMI_D3 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D04__GPMI_D4 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D05__GPMI_D5 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D06__GPMI_D6 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_D07__GPMI_D7 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_CE0N__GPMI_CE0N | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_RDY0__GPMI_READY0 | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_RDN__GPMI_RDN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_WRN__GPMI_WRN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_ALE__GPMI_ALE | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_CLE__GPMI_CLE | - (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RESETN__GPMI_RESETN | - (MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP), - - /* Backlight */ - MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, -}; - -/* led */ -static const struct gpio_led m28evk_leds[] __initconst = { - { - .name = "user-led1", - .default_trigger = "heartbeat", - .gpio = M28EVK_GPIO_USERLED1, - }, - { - .name = "user-led2", - .default_trigger = "heartbeat", - .gpio = M28EVK_GPIO_USERLED2, - }, -}; - -static const struct gpio_led_platform_data m28evk_led_data __initconst = { - .leds = m28evk_leds, - .num_leds = ARRAY_SIZE(m28evk_leds), -}; - -static struct fec_platform_data mx28_fec_pdata[] __initdata = { - { - /* fec0 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, { - /* fec1 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, -}; - -static int __init m28evk_fec_get_mac(void) -{ - int i; - u32 val; - const u32 *ocotp = mxs_get_ocotp(); - - if (!ocotp) - return -ETIMEDOUT; - - /* - * OCOTP only stores the last 4 octets for each mac address, - * so hard-code DENX OUI (C0:E5:4E) here. - */ - for (i = 0; i < 2; i++) { - val = ocotp[i]; - mx28_fec_pdata[i].mac[0] = 0xC0; - mx28_fec_pdata[i].mac[1] = 0xE5; - mx28_fec_pdata[i].mac[2] = 0x4E; - mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; - mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; - mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; - } - - return 0; -} - -/* mxsfb (lcdif) */ -static struct fb_videomode m28evk_video_modes[] = { - { - .name = "Ampire AM-800480R2TMQW-T01H", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 30066, /* picosecond (33.26 MHz) */ - .left_margin = 0, - .right_margin = 256, - .upper_margin = 0, - .lower_margin = 45, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT, - }, -}; - -static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = { - .mode_list = m28evk_video_modes, - .mode_count = ARRAY_SIZE(m28evk_video_modes), - .default_bpp = 16, - .ld_intf_width = STMLCDIF_18BIT, -}; - -static struct at24_platform_data m28evk_eeprom = { - .byte_len = 16384, - .page_size = 32, - .flags = AT24_FLAG_ADDR16, -}; - -static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = { - { - I2C_BOARD_INFO("at24", 0x51), /* E0=1, E1=0, E2=0 */ - .platform_data = &m28evk_eeprom, - }, -}; - -static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = { - { - /* mmc0 */ - .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, { - /* mmc1 */ - .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, -}; - -static void __init m28evk_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart3(); - - if (!m28evk_fec_get_mac()) { - mx28_add_fec(0, &mx28_fec_pdata[0]); - mx28_add_fec(1, &mx28_fec_pdata[1]); - } - - mx28_add_flexcan(0, NULL); - mx28_add_flexcan(1, NULL); - - mx28_add_mxsfb(&m28evk_mxsfb_pdata); - - mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]); - mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]); - - gpio_led_register_device(0, &m28evk_led_data); - - /* I2C */ - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo, - ARRAY_SIZE(m28_stk5v3_i2c_boardinfo)); -} - -static void __init m28evk_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer m28evk_timer = { - .init = m28evk_timer_init, -}; - -MACHINE_START(M28EVK, "DENX M28 EVK") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &m28evk_timer, - .init_machine = m28evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c deleted file mode 100644 index e7272a41939d..000000000000 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx23.h" - -#define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) -#define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) -#define MX23EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) -#define MX23EVK_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) - -static const iomux_cfg_t mx23evk_pads[] __initconst = { - /* duart */ - MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart */ - MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, - MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, - MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL, - MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL, - - /* mxsfb (lcdif) */ - MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL, - MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL, - MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL, - MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL, - MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL, - MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL, - MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL, - MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL, - MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL, - MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL, - MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL, - MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL, - MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL, - MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL, - MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL, - MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, - /* LCD panel enable */ - MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, - /* backlight control */ - MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, - - /* mmc */ - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D08__SSP1_DATA4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D09__SSP1_DATA5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D10__SSP1_DATA6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_GPMI_D11__SSP1_DATA7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_CMD__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DETECT__SSP1_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_SSP1_SCK__SSP1_SCK | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX23_PAD_PWM4__GPIO_1_30 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX23_PAD_PWM3__GPIO_1_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), -}; - -/* mxsfb (lcdif) */ -static struct fb_videomode mx23evk_video_modes[] = { - { - .name = "Samsung-LMS430HF02", - .refresh = 60, - .xres = 480, - .yres = 272, - .pixclock = 108096, /* picosecond (9.2 MHz) */ - .left_margin = 15, - .right_margin = 8, - .upper_margin = 12, - .lower_margin = 4, - .hsync_len = 1, - .vsync_len = 1, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; - -static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { - .mode_list = mx23evk_video_modes, - .mode_count = ARRAY_SIZE(mx23evk_video_modes), - .default_bpp = 32, - .ld_intf_width = STMLCDIF_24BIT, -}; - -static struct mxs_mmc_platform_data mx23evk_mmc_pdata __initdata = { - .wp_gpio = MX23EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, -}; - -static void __init mx23evk_init(void) -{ - int ret; - - mx23_soc_init(); - - mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); - - mx23_add_duart(); - mx23_add_auart0(); - - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX23EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - mx23_add_mxs_mmc(0, &mx23evk_mmc_pdata); - - ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); - if (ret) - pr_warn("failed to request gpio lcd-enable: %d\n", ret); - else - gpio_set_value(MX23EVK_LCD_ENABLE, 1); - - ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); - if (ret) - pr_warn("failed to request gpio bl-enable: %d\n", ret); - else - gpio_set_value(MX23EVK_BL_ENABLE, 1); - - mx23_add_mxsfb(&mx23evk_mxsfb_pdata); - mx23_add_rtc_stmp3xxx(); -} - -static void __init mx23evk_timer_init(void) -{ - mx23_clocks_init(); -} - -static struct sys_timer mx23evk_timer = { - .init = mx23evk_timer_init, -}; - -MACHINE_START(MX23EVK, "Freescale MX23 EVK") - /* Maintainer: Freescale Semiconductor, Inc. */ - .map_io = mx23_map_io, - .init_irq = mx23_init_irq, - .timer = &mx23evk_timer, - .init_machine = mx23evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c deleted file mode 100644 index dafd48e86c8c..000000000000 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-mx28.h" - -#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) -#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) -#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) -#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) -#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) -#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) - -#define MX28EVK_MMC0_WRITE_PROTECT MXS_GPIO_NR(2, 12) -#define MX28EVK_MMC1_WRITE_PROTECT MXS_GPIO_NR(0, 28) -#define MX28EVK_MMC0_SLOT_POWER MXS_GPIO_NR(3, 28) -#define MX28EVK_MMC1_SLOT_POWER MXS_GPIO_NR(3, 29) - -static const iomux_cfg_t mx28evk_pads[] __initconst = { - /* duart */ - MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, - MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, - - /* auart0 */ - MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, - MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, - MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, - /* auart3 */ - MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL, - MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL, - MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL, - MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL, - -#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) - /* fec0 */ - MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, - /* fec1 */ - MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC, - MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC, - MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC, - /* phy power line */ - MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL, - /* phy reset line */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL, - - /* flexcan0 */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - /* flexcan1 */ - MX28_PAD_GPMI_CE2N__CAN1_TX, - MX28_PAD_GPMI_CE3N__CAN1_RX, - /* transceiver power control */ - MX28_PAD_SSP1_CMD__GPIO_2_13, - - /* mxsfb (lcdif) */ - MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL, - MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL, - MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL, - MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL, - MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL, - MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL, - MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL, - MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL, - MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL, - MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL, - MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, - MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, - MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, - MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, - MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, - MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, - MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, - MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, - MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL, - MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL, - MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL, - MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL, - MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL, - MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL, - MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL, - MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL, - MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL, - MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL, - /* LCD panel enable */ - MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL, - /* backlight control */ - MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL, - /* mmc0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_SSP1_SCK__GPIO_2_12 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM3__GPIO_3_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* mmc1 */ - MX28_PAD_GPMI_D00__SSP1_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D01__SSP1_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D02__SSP1_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D03__SSP1_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D04__SSP1_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D05__SSP1_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D06__SSP1_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_D07__SSP1_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY1__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_GPMI_WRN__SSP1_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* write protect */ - MX28_PAD_GPMI_RESETN__GPIO_0_28 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - /* slot power enable */ - MX28_PAD_PWM4__GPIO_3_29 | - (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - - /* led */ - MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_I2C0_SDA__I2C0_SDA | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - - /* saif0 & saif1 */ - MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), -}; - -/* led */ -static const struct gpio_led mx28evk_leds[] __initconst = { - { - .name = "GPIO-LED", - .default_trigger = "heartbeat", - .gpio = MX28EVK_GPIO_LED, - }, -}; - -static const struct gpio_led_platform_data mx28evk_led_data __initconst = { - .leds = mx28evk_leds, - .num_leds = ARRAY_SIZE(mx28evk_leds), -}; - -/* fec */ -static void __init mx28evk_fec_reset(void) -{ - struct clk *clk; - - /* Enable fec phy clock */ - clk = clk_get_sys("enet_out", NULL); - if (!IS_ERR(clk)) - clk_prepare_enable(clk); - - gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); - mdelay(1); - gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); -} - -static struct fec_platform_data mx28_fec_pdata[] __initdata = { - { - /* fec0 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, { - /* fec1 */ - .phy = PHY_INTERFACE_MODE_RMII, - }, -}; - -static int __init mx28evk_fec_get_mac(void) -{ - int i; - u32 val; - const u32 *ocotp = mxs_get_ocotp(); - - if (!ocotp) - return -ETIMEDOUT; - - /* - * OCOTP only stores the last 4 octets for each mac address, - * so hard-code Freescale OUI (00:04:9f) here. - */ - for (i = 0; i < 2; i++) { - val = ocotp[i]; - mx28_fec_pdata[i].mac[0] = 0x00; - mx28_fec_pdata[i].mac[1] = 0x04; - mx28_fec_pdata[i].mac[2] = 0x9f; - mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff; - mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff; - mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff; - } - - return 0; -} - -/* - * MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers - */ -static int flexcan0_en, flexcan1_en; - -static void mx28evk_flexcan_switch(void) -{ - if (flexcan0_en || flexcan1_en) - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1); - else - gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0); -} - -static void mx28evk_flexcan0_switch(int enable) -{ - flexcan0_en = enable; - mx28evk_flexcan_switch(); -} - -static void mx28evk_flexcan1_switch(int enable) -{ - flexcan1_en = enable; - mx28evk_flexcan_switch(); -} - -static const struct flexcan_platform_data - mx28evk_flexcan_pdata[] __initconst = { - { - .transceiver_switch = mx28evk_flexcan0_switch, - }, { - .transceiver_switch = mx28evk_flexcan1_switch, - } -}; - -/* mxsfb (lcdif) */ -static struct fb_videomode mx28evk_video_modes[] = { - { - .name = "Seiko-43WVF1G", - .refresh = 60, - .xres = 800, - .yres = 480, - .pixclock = 29851, /* picosecond (33.5 MHz) */ - .left_margin = 89, - .right_margin = 164, - .upper_margin = 23, - .lower_margin = 10, - .hsync_len = 10, - .vsync_len = 10, - .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | - FB_SYNC_DOTCLK_FAILING_ACT, - }, -}; - -static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = { - .mode_list = mx28evk_video_modes, - .mode_count = ARRAY_SIZE(mx28evk_video_modes), - .default_bpp = 32, - .ld_intf_width = STMLCDIF_24BIT, -}; - -static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = { - { - /* mmc0 */ - .wp_gpio = MX28EVK_MMC0_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, { - /* mmc1 */ - .wp_gpio = MX28EVK_MMC1_WRITE_PROTECT, - .flags = SLOTF_8_BIT_CAPABLE, - }, -}; - -static struct i2c_board_info mxs_i2c0_board_info[] __initdata = { - { - I2C_BOARD_INFO("sgtl5000", 0x0a), - }, -}; - -#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) -static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = { - REGULATOR_SUPPLY("VDDA", "0-000a"), - REGULATOR_SUPPLY("VDDIO", "0-000a"), -}; - -static struct regulator_init_data mx28evk_vdd_reg_init_data = { - .constraints = { - .name = "3V3", - .always_on = 1, - }, - .consumer_supplies = mx28evk_audio_consumer_supplies, - .num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies), -}; - -static struct fixed_voltage_config mx28evk_vdd_pdata = { - .supply_name = "board-3V3", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &mx28evk_vdd_reg_init_data, -}; -static struct platform_device mx28evk_voltage_regulator = { - .name = "reg-fixed-voltage", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &mx28evk_vdd_pdata, - }, -}; -static void __init mx28evk_add_regulators(void) -{ - platform_device_register(&mx28evk_voltage_regulator); -} -#else -static void __init mx28evk_add_regulators(void) {} -#endif - -static const struct gpio mx28evk_gpios[] __initconst = { - { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, - { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, - { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, - { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, - { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, - { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, - { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, -}; - -static const struct mxs_saif_platform_data - mx28evk_mxs_saif_pdata[] __initconst = { - /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ - { - .master_mode = 1, - .master_id = 0, - }, { - .master_mode = 0, - .master_id = 0, - }, -}; - -static void __init mx28evk_init(void) -{ - int ret; - - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads)); - - mx28_add_duart(); - mx28_add_auart0(); - mx28_add_auart3(); - - if (mx28evk_fec_get_mac()) - pr_warn("%s: failed on fec mac setup\n", __func__); - - ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); - if (ret) - pr_err("One or more GPIOs failed to be requested: %d\n", ret); - - mx28evk_fec_reset(); - mx28_add_fec(0, &mx28_fec_pdata[0]); - mx28_add_fec(1, &mx28_fec_pdata[1]); - - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); - - mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); - mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); - mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]); - - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, mxs_i2c0_board_info, - ARRAY_SIZE(mxs_i2c0_board_info)); - - mx28evk_add_regulators(); - - mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, - NULL, 0); - - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); - - mx28_add_rtc_stmp3xxx(); - - gpio_led_register_device(0, &mx28evk_led_data); -} - -static void __init mx28evk_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer mx28evk_timer = { - .init = mx28evk_timer_init, -}; - -MACHINE_START(MX28EVK, "Freescale MX28 EVK") - /* Maintainer: Freescale Semiconductor, Inc. */ - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &mx28evk_timer, - .init_machine = mx28evk_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c deleted file mode 100644 index 6548965e4a76..000000000000 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * board setup for STMP378x-Development-Board - * - * based on mx23evk board setup and information gained form the original - * plat-stmp based board setup, now converted to mach-mxs. - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "devices-mx23.h" - -#define STMP378X_DEVB_MMC0_WRITE_PROTECT MXS_GPIO_NR(1, 30) -#define STMP378X_DEVB_MMC0_SLOT_POWER MXS_GPIO_NR(1, 29) - -#define STMP378X_DEVB_PAD_AUART (MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL) - -static const iomux_cfg_t stmp378x_dvb_pads[] __initconst = { - /* duart (extended setup missing in old boardcode, too */ - MX23_PAD_PWM0__DUART_RX, - MX23_PAD_PWM1__DUART_TX, - - /* auart */ - MX23_PAD_AUART1_RX__AUART1_RX | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_TX__AUART1_TX | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_CTS__AUART1_CTS | STMP378X_DEVB_PAD_AUART, - MX23_PAD_AUART1_RTS__AUART1_RTS | STMP378X_DEVB_PAD_AUART, - - /* mmc */ - MX23_PAD_SSP1_DATA0__SSP1_DATA0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA1__SSP1_DATA1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA2__SSP1_DATA2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DATA3__SSP1_DATA3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_CMD__SSP1_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX23_PAD_SSP1_DETECT__SSP1_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_SSP1_SCK__SSP1_SCK | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX23_PAD_PWM4__GPIO_1_30 | MXS_PAD_CTRL, /* write protect */ - MX23_PAD_PWM3__GPIO_1_29 | MXS_PAD_CTRL, /* power enable */ -}; - -static struct mxs_mmc_platform_data stmp378x_dvb_mmc_pdata __initdata = { - .wp_gpio = STMP378X_DEVB_MMC0_WRITE_PROTECT, -}; - -static struct spi_board_info spi_board_info[] __initdata = { -#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE) - { - .modalias = "enc28j60", - .max_speed_hz = 6 * 1000 * 1000, - .bus_num = 1, - .chip_select = 0, - .platform_data = NULL, - }, -#endif -}; - -static void __init stmp378x_dvb_init(void) -{ - int ret; - - mx23_soc_init(); - - mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads, - ARRAY_SIZE(stmp378x_dvb_pads)); - - mx23_add_duart(); - mx23_add_auart0(); - mx23_add_rtc_stmp3xxx(); - - /* power on mmc slot */ - ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER, - GPIOF_OUT_INIT_LOW, "mmc0-slot-power"); - if (ret) - pr_warn("could not power mmc (%d)\n", ret); - - mx23_add_mxs_mmc(0, &stmp378x_dvb_mmc_pdata); - - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); -} - -static void __init stmp378x_dvb_timer_init(void) -{ - mx23_clocks_init(); -} - -static struct sys_timer stmp378x_dvb_timer = { - .init = stmp378x_dvb_timer_init, -}; - -MACHINE_START(STMP378X, "STMP378X") - .map_io = mx23_map_io, - .init_irq = mx23_init_irq, - .timer = &stmp378x_dvb_timer, - .init_machine = stmp378x_dvb_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c deleted file mode 100644 index 8837029de1a4..000000000000 --- a/arch/arm/mach-mxs/mach-tx28.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * Copyright (C) 2010 - * - * based on: mach-mx28_evk.c - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include - -#include "devices-mx28.h" -#include "module-tx28.h" - -#define TX28_STK5_GPIO_LED MXS_GPIO_NR(4, 10) - -static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { - /* LED */ - MX28_PAD_ENET0_RXD3__GPIO_4_10 | - MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL, - - /* framebuffer */ -#define LCD_MODE (MXS_PAD_3V3 | MXS_PAD_4MA) - MX28_PAD_LCD_D00__LCD_D0 | LCD_MODE, - MX28_PAD_LCD_D01__LCD_D1 | LCD_MODE, - MX28_PAD_LCD_D02__LCD_D2 | LCD_MODE, - MX28_PAD_LCD_D03__LCD_D3 | LCD_MODE, - MX28_PAD_LCD_D04__LCD_D4 | LCD_MODE, - MX28_PAD_LCD_D05__LCD_D5 | LCD_MODE, - MX28_PAD_LCD_D06__LCD_D6 | LCD_MODE, - MX28_PAD_LCD_D07__LCD_D7 | LCD_MODE, - MX28_PAD_LCD_D08__LCD_D8 | LCD_MODE, - MX28_PAD_LCD_D09__LCD_D9 | LCD_MODE, - MX28_PAD_LCD_D10__LCD_D10 | LCD_MODE, - MX28_PAD_LCD_D11__LCD_D11 | LCD_MODE, - MX28_PAD_LCD_D12__LCD_D12 | LCD_MODE, - MX28_PAD_LCD_D13__LCD_D13 | LCD_MODE, - MX28_PAD_LCD_D14__LCD_D14 | LCD_MODE, - MX28_PAD_LCD_D15__LCD_D15 | LCD_MODE, - MX28_PAD_LCD_D16__LCD_D16 | LCD_MODE, - MX28_PAD_LCD_D17__LCD_D17 | LCD_MODE, - MX28_PAD_LCD_D18__LCD_D18 | LCD_MODE, - MX28_PAD_LCD_D19__LCD_D19 | LCD_MODE, - MX28_PAD_LCD_D20__LCD_D20 | LCD_MODE, - MX28_PAD_LCD_D21__LCD_D21 | LCD_MODE, - MX28_PAD_LCD_D22__LCD_D22 | LCD_MODE, - MX28_PAD_LCD_D23__LCD_D23 | LCD_MODE, - MX28_PAD_LCD_RD_E__LCD_VSYNC | LCD_MODE, - MX28_PAD_LCD_WR_RWN__LCD_HSYNC | LCD_MODE, - MX28_PAD_LCD_RS__LCD_DOTCLK | LCD_MODE, - MX28_PAD_LCD_CS__LCD_CS | LCD_MODE, - MX28_PAD_LCD_VSYNC__LCD_VSYNC | LCD_MODE, - MX28_PAD_LCD_HSYNC__LCD_HSYNC | LCD_MODE, - MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | LCD_MODE, - MX28_PAD_LCD_ENABLE__GPIO_1_31 | LCD_MODE, - MX28_PAD_LCD_RESET__GPIO_3_30 | LCD_MODE, - MX28_PAD_PWM0__PWM_0 | LCD_MODE, - - /* UART1 */ - MX28_PAD_AUART0_CTS__DUART_RX, - MX28_PAD_AUART0_RTS__DUART_TX, - MX28_PAD_AUART0_TX__DUART_RTS, - MX28_PAD_AUART0_RX__DUART_CTS, - - /* UART2 */ - MX28_PAD_AUART1_RX__AUART1_RX, - MX28_PAD_AUART1_TX__AUART1_TX, - MX28_PAD_AUART1_RTS__AUART1_RTS, - MX28_PAD_AUART1_CTS__AUART1_CTS, - - /* CAN */ - MX28_PAD_GPMI_RDY2__CAN0_TX, - MX28_PAD_GPMI_RDY3__CAN0_RX, - - /* I2C */ - MX28_PAD_I2C0_SCL__I2C0_SCL, - MX28_PAD_I2C0_SDA__I2C0_SDA, - - /* TSC2007 */ - MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP, - - /* MMC0 */ - MX28_PAD_SSP0_DATA0__SSP0_D0 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA1__SSP0_D1 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA2__SSP0_D2 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA3__SSP0_D3 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_CMD__SSP0_CMD | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), - MX28_PAD_SSP0_SCK__SSP0_SCK | - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), -}; - -static const struct gpio_led tx28_stk5v3_leds[] __initconst = { - { - .name = "GPIO-LED", - .default_trigger = "heartbeat", - .gpio = TX28_STK5_GPIO_LED, - }, -}; - -static const struct gpio_led_platform_data tx28_stk5v3_led_data __initconst = { - .leds = tx28_stk5v3_leds, - .num_leds = ARRAY_SIZE(tx28_stk5v3_leds), -}; - -static struct spi_board_info tx28_spi_board_info[] = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .controller_data = (void *)SPI_GPIO_NO_CHIPSELECT, - .mode = SPI_MODE_0, - }, -}; - -static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, -}; - -static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { - .wp_gpio = -EINVAL, - .flags = SLOTF_4_BIT_CAPABLE, -}; - -static void __init tx28_stk5v3_init(void) -{ - mx28_soc_init(); - - mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, - ARRAY_SIZE(tx28_stk5v3_pads)); - - mx28_add_duart(); /* UART1 */ - mx28_add_auart(1); /* UART2 */ - - tx28_add_fec0(); - /* spi via ssp will be added when available */ - spi_register_board_info(tx28_spi_board_info, - ARRAY_SIZE(tx28_spi_board_info)); - gpio_led_register_device(0, &tx28_stk5v3_led_data); - mx28_add_mxs_i2c(0); - i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, - ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); - mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); - mx28_add_rtc_stmp3xxx(); -} - -static void __init tx28_timer_init(void) -{ - mx28_clocks_init(); -} - -static struct sys_timer tx28_timer = { - .init = tx28_timer_init, -}; - -MACHINE_START(TX28, "Ka-Ro electronics TX28 module") - .map_io = mx28_map_io, - .init_irq = mx28_init_irq, - .timer = &tx28_timer, - .init_machine = tx28_stk5v3_init, - .restart = mxs_restart, -MACHINE_END diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c deleted file mode 100644 index 0f71f82101cc..000000000000 --- a/arch/arm/mach-mxs/module-tx28.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 2010 - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include -#include -#include - -#include -#include "devices-mx28.h" - -#include "module-tx28.h" - -#define TX28_FEC_PHY_POWER MXS_GPIO_NR(3, 29) -#define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13) - -static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = { - /* PHY POWER */ - MX28_PAD_PWM4__GPIO_3_29 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - /* PHY RESET */ - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - /* Mode strap pins 0-2 */ - MX28_PAD_ENET0_RXD0__GPIO_4_3 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - MX28_PAD_ENET0_RXD1__GPIO_4_4 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - MX28_PAD_ENET0_RX_EN__GPIO_4_2 | - MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3, - /* nINT */ - MX28_PAD_ENET0_TX_CLK__GPIO_4_5 | - MXS_PAD_4MA | MXS_PAD_NOPULL | MXS_PAD_3V3, - - MX28_PAD_ENET0_MDC__GPIO_4_0, - MX28_PAD_ENET0_MDIO__GPIO_4_1, - MX28_PAD_ENET0_TX_EN__GPIO_4_6, - MX28_PAD_ENET0_TXD0__GPIO_4_7, - MX28_PAD_ENET0_TXD1__GPIO_4_8, - MX28_PAD_ENET_CLK__GPIO_4_16, -}; - -#define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3) -static const iomux_cfg_t tx28_fec0_pads[] __initconst = { - MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE, - MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE, - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE, - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | FEC_MODE, - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | FEC_MODE, - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | FEC_MODE, - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | FEC_MODE, - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | FEC_MODE, - MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE, -}; - -static const iomux_cfg_t tx28_fec1_pads[] __initconst = { - MX28_PAD_ENET0_RXD2__ENET1_RXD0, - MX28_PAD_ENET0_RXD3__ENET1_RXD1, - MX28_PAD_ENET0_TXD2__ENET1_TXD0, - MX28_PAD_ENET0_TXD3__ENET1_TXD1, - MX28_PAD_ENET0_COL__ENET1_TX_EN, - MX28_PAD_ENET0_CRS__ENET1_RX_EN, -}; - -static const struct fec_platform_data tx28_fec0_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct fec_platform_data tx28_fec1_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -int __init tx28_add_fec0(void) -{ - int i, ret; - - pr_debug("%s: Switching FEC PHY power off\n", __func__); - ret = mxs_iomux_setup_multiple_pads(tx28_fec_gpio_pads, - ARRAY_SIZE(tx28_fec_gpio_pads)); - for (i = 0; i < ARRAY_SIZE(tx28_fec_gpio_pads); i++) { - unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i])); - - ret = gpio_request(gpio, "FEC"); - if (ret) { - pr_err("Failed to request GPIO_%d_%d: %d\n", - PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i]), ret); - goto free_gpios; - } - ret = gpio_direction_output(gpio, 0); - if (ret) { - pr_err("Failed to set direction of GPIO_%d_%d to output: %d\n", - gpio / 32 + 1, gpio % 32, ret); - goto free_gpios; - } - } - - /* Power up fec phy */ - pr_debug("%s: Switching FEC PHY power on\n", __func__); - ret = gpio_direction_output(TX28_FEC_PHY_POWER, 1); - if (ret) { - pr_err("Failed to power on PHY: %d\n", ret); - goto free_gpios; - } - mdelay(26); /* 25ms according to data sheet */ - - /* nINT */ - gpio_direction_input(MXS_GPIO_NR(4, 5)); - /* Mode strap pins */ - gpio_direction_output(MXS_GPIO_NR(4, 2), 1); - gpio_direction_output(MXS_GPIO_NR(4, 3), 1); - gpio_direction_output(MXS_GPIO_NR(4, 4), 1); - - udelay(100); /* minimum assertion time for nRST */ - - pr_debug("%s: Deasserting FEC PHY RESET\n", __func__); - gpio_set_value(TX28_FEC_PHY_RESET, 1); - - ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads, - ARRAY_SIZE(tx28_fec0_pads)); - if (ret) { - pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", - __func__, ret); - goto free_gpios; - } - pr_debug("%s: Registering FEC0 device\n", __func__); - mx28_add_fec(0, &tx28_fec0_data); - return 0; - -free_gpios: - while (--i >= 0) { - unsigned int gpio = MXS_GPIO_NR(PAD_BANK(tx28_fec_gpio_pads[i]), - PAD_PIN(tx28_fec_gpio_pads[i])); - - gpio_free(gpio); - } - - return ret; -} - -int __init tx28_add_fec1(void) -{ - int ret; - - ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads, - ARRAY_SIZE(tx28_fec1_pads)); - if (ret) { - pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n", - __func__, ret); - return ret; - } - pr_debug("%s: Registering FEC1 device\n", __func__); - mx28_add_fec(1, &tx28_fec1_data); - return 0; -} diff --git a/arch/arm/mach-mxs/module-tx28.h b/arch/arm/mach-mxs/module-tx28.h deleted file mode 100644 index 8ed425457d30..000000000000 --- a/arch/arm/mach-mxs/module-tx28.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -int __init tx28_add_fec0(void); -int __init tx28_add_fec1(void); -- cgit v1.2.3-58-ga151 From 4a1e75b60fff66b668b06a18fea100adc5613f86 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 23:02:46 +0800 Subject: ARM: mxs: remove non-DT core functions With all board files removed, those core functions used for non-DT boot only can be removed now. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/common.h | 9 -------- arch/arm/mach-mxs/mm.c | 39 --------------------------------- 2 files changed, 48 deletions(-) diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index de6c7ba42544..4dec79563f19 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -17,21 +17,12 @@ extern void mxs_timer_init(int); extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); -extern void mx23_soc_init(void); extern int mx23_clocks_init(void); extern void mx23_map_io(void); -extern void mx23_init_irq(void); -extern void mx28_soc_init(void); extern int mx28_clocks_init(void); extern void mx28_map_io(void); -extern void mx28_init_irq(void); extern void icoll_init_irq(void); -extern struct platform_device *mxs_add_dma(const char *devid, - resource_size_t base); -extern struct platform_device *mxs_add_gpio(char *name, int id, - resource_size_t iobase, int irq); - #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index dccb67a9e7c4..a4294aa9f301 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -13,14 +13,11 @@ #include #include -#include #include #include #include -#include -#include /* * Define the MX23 memory map. @@ -48,43 +45,7 @@ void __init mx23_map_io(void) iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc)); } -void __init mx23_init_irq(void) -{ - icoll_init_irq(); -} - void __init mx28_map_io(void) { iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc)); } - -void __init mx28_init_irq(void) -{ - icoll_init_irq(); -} - -void __init mx23_soc_init(void) -{ - pinctrl_provide_dummies(); - - mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR); - mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR); - - mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); - mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); - mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); -} - -void __init mx28_soc_init(void) -{ - pinctrl_provide_dummies(); - - mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR); - mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR); - - mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); - mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); - mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); - mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); - mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); -} -- cgit v1.2.3-58-ga151 From f940b0272a7313176ed48696c397e55a9e4b4850 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 22:48:11 +0800 Subject: ARM: mxs: remove platform device codes With all the board files removed, there is no user for those platform device code. Remove them. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/Kconfig | 2 - arch/arm/mach-mxs/Makefile | 4 +- arch/arm/mach-mxs/devices-mx23.h | 43 -------- arch/arm/mach-mxs/devices-mx28.h | 63 ------------ arch/arm/mach-mxs/devices.c | 87 ----------------- arch/arm/mach-mxs/devices/Kconfig | 33 ------- arch/arm/mach-mxs/devices/Makefile | 12 --- arch/arm/mach-mxs/devices/platform-auart.c | 65 ------------ arch/arm/mach-mxs/devices/platform-dma.c | 31 ------ arch/arm/mach-mxs/devices/platform-fec.c | 52 ---------- arch/arm/mach-mxs/devices/platform-flexcan.c | 51 ---------- arch/arm/mach-mxs/devices/platform-gpio-mxs.c | 33 ------- arch/arm/mach-mxs/devices/platform-gpmi-nand.c | 81 --------------- arch/arm/mach-mxs/devices/platform-mxs-i2c.c | 52 ---------- arch/arm/mach-mxs/devices/platform-mxs-mmc.c | 76 --------------- arch/arm/mach-mxs/devices/platform-mxs-pwm.c | 22 ----- arch/arm/mach-mxs/devices/platform-mxs-saif.c | 61 ------------ arch/arm/mach-mxs/devices/platform-mxsfb.c | 47 --------- arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c | 51 ---------- arch/arm/mach-mxs/include/mach/devices-common.h | 114 ---------------------- 20 files changed, 1 insertion(+), 979 deletions(-) delete mode 100644 arch/arm/mach-mxs/devices-mx23.h delete mode 100644 arch/arm/mach-mxs/devices-mx28.h delete mode 100644 arch/arm/mach-mxs/devices.c delete mode 100644 arch/arm/mach-mxs/devices/Kconfig delete mode 100644 arch/arm/mach-mxs/devices/Makefile delete mode 100644 arch/arm/mach-mxs/devices/platform-auart.c delete mode 100644 arch/arm/mach-mxs/devices/platform-dma.c delete mode 100644 arch/arm/mach-mxs/devices/platform-fec.c delete mode 100644 arch/arm/mach-mxs/devices/platform-flexcan.c delete mode 100644 arch/arm/mach-mxs/devices/platform-gpio-mxs.c delete mode 100644 arch/arm/mach-mxs/devices/platform-gpmi-nand.c delete mode 100644 arch/arm/mach-mxs/devices/platform-mxs-i2c.c delete mode 100644 arch/arm/mach-mxs/devices/platform-mxs-mmc.c delete mode 100644 arch/arm/mach-mxs/devices/platform-mxs-pwm.c delete mode 100644 arch/arm/mach-mxs/devices/platform-mxs-saif.c delete mode 100644 arch/arm/mach-mxs/devices/platform-mxsfb.c delete mode 100644 arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c delete mode 100644 arch/arm/mach-mxs/include/mach/devices-common.h diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 2e6cb6d8604f..ecc431909d6f 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -1,7 +1,5 @@ if ARCH_MXS -source "arch/arm/mach-mxs/devices/Kconfig" - config SOC_IMX23 bool select ARM_AMBA diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index a7ace243cfcc..2480ce99c6c4 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,8 +1,6 @@ # Common support -obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o +obj-y := icoll.o iomux.o ocotp.o system.o timer.o mm.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o - -obj-y += devices/ diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h deleted file mode 100644 index 9ee5cede3d42..000000000000 --- a/arch/arm/mach-mxs/devices-mx23.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -static inline int mx23_add_duart(void) -{ - struct amba_device *d; - - d = amba_ahb_device_add(NULL, "duart", MX23_DUART_BASE_ADDR, SZ_8K, - MX23_INT_DUART, 0, 0, 0); - return IS_ERR(d) ? PTR_ERR(d) : 0; -} - -extern const struct mxs_auart_data mx23_auart_data[] __initconst; -#define mx23_add_auart(id) mxs_add_auart(&mx23_auart_data[id]) -#define mx23_add_auart0() mx23_add_auart(0) -#define mx23_add_auart1() mx23_add_auart(1) - -extern const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst; -#define mx23_add_gpmi_nand(pdata) \ - mxs_add_gpmi_nand(pdata, &mx23_gpmi_nand_data) - -extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst; -#define mx23_add_mxs_mmc(id, pdata) \ - mxs_add_mxs_mmc(&mx23_mxs_mmc_data[id], pdata) - -#define mx23_add_mxs_pwm(id) mxs_add_mxs_pwm(MX23_PWM_BASE_ADDR, id) - -struct platform_device *__init mx23_add_mxsfb( - const struct mxsfb_platform_data *pdata); - -struct platform_device *__init mx23_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h deleted file mode 100644 index fcab431060f4..000000000000 --- a/arch/arm/mach-mxs/devices-mx28.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -static inline int mx28_add_duart(void) -{ - struct amba_device *d; - - d = amba_ahb_device_add(NULL, "duart", MX28_DUART_BASE_ADDR, SZ_8K, - MX28_INT_DUART, 0, 0, 0); - return IS_ERR(d) ? PTR_ERR(d) : 0; -} - -extern const struct mxs_auart_data mx28_auart_data[] __initconst; -#define mx28_add_auart(id) mxs_add_auart(&mx28_auart_data[id]) -#define mx28_add_auart0() mx28_add_auart(0) -#define mx28_add_auart1() mx28_add_auart(1) -#define mx28_add_auart2() mx28_add_auart(2) -#define mx28_add_auart3() mx28_add_auart(3) -#define mx28_add_auart4() mx28_add_auart(4) - -extern const struct mxs_fec_data mx28_fec_data[] __initconst; -#define mx28_add_fec(id, pdata) \ - mxs_add_fec(&mx28_fec_data[id], pdata) - -extern const struct mxs_flexcan_data mx28_flexcan_data[] __initconst; -#define mx28_add_flexcan(id, pdata) \ - mxs_add_flexcan(&mx28_flexcan_data[id], pdata) -#define mx28_add_flexcan0(pdata) mx28_add_flexcan(0, pdata) -#define mx28_add_flexcan1(pdata) mx28_add_flexcan(1, pdata) - -extern const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst; -#define mx28_add_gpmi_nand(pdata) \ - mxs_add_gpmi_nand(pdata, &mx28_gpmi_nand_data) - -extern const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst; -#define mx28_add_mxs_i2c(id) mxs_add_mxs_i2c(&mx28_mxs_i2c_data[id]) - -extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst; -#define mx28_add_mxs_mmc(id, pdata) \ - mxs_add_mxs_mmc(&mx28_mxs_mmc_data[id], pdata) - -#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id) - -struct platform_device *__init mx28_add_mxsfb( - const struct mxsfb_platform_data *pdata); - -extern const struct mxs_saif_data mx28_saif_data[] __initconst; -#define mx28_add_saif(id, pdata) \ - mxs_add_saif(&mx28_saif_data[id], pdata) - -struct platform_device *__init mx28_add_rtc_stmp3xxx(void); diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c deleted file mode 100644 index cf50b5a66dda..000000000000 --- a/arch/arm/mach-mxs/devices.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -struct platform_device *__init mxs_add_platform_device_dmamask( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask) -{ - int ret = -ENOMEM; - struct platform_device *pdev; - - pdev = platform_device_alloc(name, id); - if (!pdev) - goto err; - - if (dmamask) { - /* - * This memory isn't freed when the device is put, - * I don't have a nice idea for that though. Conceptually - * dma_mask in struct device should not be a pointer. - * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 - */ - pdev->dev.dma_mask = - kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); - if (!pdev->dev.dma_mask) - /* ret is still -ENOMEM; */ - goto err; - - *pdev->dev.dma_mask = dmamask; - pdev->dev.coherent_dma_mask = dmamask; - } - - if (res) { - ret = platform_device_add_resources(pdev, res, num_resources); - if (ret) - goto err; - } - - if (data) { - ret = platform_device_add_data(pdev, data, size_data); - if (ret) - goto err; - } - - ret = platform_device_add(pdev); - if (ret) { -err: - if (dmamask) - kfree(pdev->dev.dma_mask); - platform_device_put(pdev); - return ERR_PTR(ret); - } - - return pdev; -} - -struct device mxs_apbh_bus = { - .init_name = "mxs_apbh", - .parent = &platform_bus, -}; - -static int __init mxs_device_init(void) -{ - return device_register(&mxs_apbh_bus); -} -core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig deleted file mode 100644 index 19659de1c4e8..000000000000 --- a/arch/arm/mach-mxs/devices/Kconfig +++ /dev/null @@ -1,33 +0,0 @@ -config MXS_HAVE_AMBA_DUART - bool - -config MXS_HAVE_PLATFORM_AUART - bool - -config MXS_HAVE_PLATFORM_FEC - bool - -config MXS_HAVE_PLATFORM_FLEXCAN - select HAVE_CAN_FLEXCAN if CAN - bool - -config MXS_HAVE_PLATFORM_GPMI_NAND - bool - -config MXS_HAVE_PLATFORM_MXS_I2C - bool - -config MXS_HAVE_PLATFORM_MXS_MMC - bool - -config MXS_HAVE_PLATFORM_MXS_PWM - bool - -config MXS_HAVE_PLATFORM_MXSFB - bool - -config MXS_HAVE_PLATFORM_MXS_SAIF - bool - -config MXS_HAVE_PLATFORM_RTC_STMP3XXX - bool diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile deleted file mode 100644 index 5f72d9787444..000000000000 --- a/arch/arm/mach-mxs/devices/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -obj-$(CONFIG_MXS_HAVE_PLATFORM_AUART) += platform-auart.o -obj-y += platform-dma.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_GPMI_NAND) += platform-gpmi-nand.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o -obj-y += platform-gpio-mxs.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o -obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c deleted file mode 100644 index 27608f5d2ac8..000000000000 --- a/arch/arm/mach-mxs/devices/platform-auart.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Sascha Hauer - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#define mxs_auart_data_entry_single(soc, _id, hwid) \ - { \ - .id = _id, \ - .iobase = soc ## _AUART ## hwid ## _BASE_ADDR, \ - .irq = soc ## _INT_AUART ## hwid, \ - } - -#define mxs_auart_data_entry(soc, _id, hwid) \ - [_id] = mxs_auart_data_entry_single(soc, _id, hwid) - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_auart_data mx23_auart_data[] __initconst = { -#define mx23_auart_data_entry(_id, hwid) \ - mxs_auart_data_entry(MX23, _id, hwid) - mx23_auart_data_entry(0, 1), - mx23_auart_data_entry(1, 2), -}; -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_auart_data mx28_auart_data[] __initconst = { -#define mx28_auart_data_entry(_id) \ - mxs_auart_data_entry(MX28, _id, _id) - mx28_auart_data_entry(0), - mx28_auart_data_entry(1), - mx28_auart_data_entry(2), - mx28_auart_data_entry(3), - mx28_auart_data_entry(4), -}; -#endif - -struct platform_device *__init mxs_add_auart( - const struct mxs_auart_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device_dmamask("mxs-auart", data->id, - res, ARRAY_SIZE(res), NULL, 0, - DMA_BIT_MASK(32)); -} - diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c deleted file mode 100644 index 46824501de00..000000000000 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -#include -#include -#include - -struct platform_device *__init mxs_add_dma(const char *devid, - resource_size_t base) -{ - struct resource res[] = { - { - .start = base, - .end = base + SZ_8K - 1, - .flags = IORESOURCE_MEM, - } - }; - - return mxs_add_platform_device_dmamask(devid, -1, - res, ARRAY_SIZE(res), NULL, 0, - DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c deleted file mode 100644 index ae96a4fd8f14..000000000000 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -#define mxs_fec_data_entry_single(soc, _id) \ - { \ - .id = _id, \ - .iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR, \ - .irq = soc ## _INT_ENET_MAC ## _id, \ - } - -#define mxs_fec_data_entry(soc, _id) \ - [_id] = mxs_fec_data_entry_single(soc, _id) - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_fec_data mx28_fec_data[] __initconst = { -#define mx28_fec_data_entry(_id) \ - mxs_fec_data_entry(MX28, _id) - mx28_fec_data_entry(0), - mx28_fec_data_entry(1), -}; -#endif - -struct platform_device *__init mxs_add_fec( - const struct mxs_fec_data *data, - const struct fec_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device_dmamask("imx28-fec", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata), - DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-mxs/devices/platform-flexcan.c b/arch/arm/mach-mxs/devices/platform-flexcan.c deleted file mode 100644 index 43a6b4bae6fe..000000000000 --- a/arch/arm/mach-mxs/devices/platform-flexcan.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2010, 2011 Pengutronix, - * Marc Kleine-Budde - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include - -#define mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) \ - { \ - .id = _id, \ - .iobase = soc ## _CAN ## _hwid ## _BASE_ADDR, \ - .iosize = _size, \ - .irq = soc ## _INT_CAN ## _hwid, \ - } - -#define mxs_flexcan_data_entry(soc, _id, _hwid, _size) \ - [_id] = mxs_flexcan_data_entry_single(soc, _id, _hwid, _size) - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_flexcan_data mx28_flexcan_data[] __initconst = { -#define mx28_flexcan_data_entry(_id, _hwid) \ - mxs_flexcan_data_entry_single(MX28, _id, _hwid, SZ_8K) - mx28_flexcan_data_entry(0, 0), - mx28_flexcan_data_entry(1, 1), -}; -#endif /* ifdef CONFIG_SOC_IMX28 */ - -struct platform_device *__init mxs_add_flexcan( - const struct mxs_flexcan_data *data, - const struct flexcan_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("flexcan", data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c deleted file mode 100644 index cd99f19ec637..000000000000 --- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -struct platform_device *__init mxs_add_gpio( - char *name, int id, resource_size_t iobase, int irq) -{ - struct resource res[] = { - { - .start = iobase, - .end = iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .end = irq, - .flags = IORESOURCE_IRQ, - }, - }; - - return platform_device_register_resndata(&mxs_apbh_bus, - name, id, res, ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c b/arch/arm/mach-mxs/devices/platform-gpmi-nand.c deleted file mode 100644 index 3e22df5944a8..000000000000 --- a/arch/arm/mach-mxs/devices/platform-gpmi-nand.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#include -#include -#include -#include -#include - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_gpmi_nand_data mx23_gpmi_nand_data __initconst = { - .devid = "imx23-gpmi-nand", - .res = { - /* GPMI */ - DEFINE_RES_MEM_NAMED(MX23_GPMI_BASE_ADDR, SZ_8K, - GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), - DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_ATTENTION, - GPMI_NAND_GPMI_INTERRUPT_RES_NAME), - /* BCH */ - DEFINE_RES_MEM_NAMED(MX23_BCH_BASE_ADDR, SZ_8K, - GPMI_NAND_BCH_REGS_ADDR_RES_NAME), - DEFINE_RES_IRQ_NAMED(MX23_INT_BCH, - GPMI_NAND_BCH_INTERRUPT_RES_NAME), - /* DMA */ - DEFINE_RES_NAMED(MX23_DMA_GPMI0, - MX23_DMA_GPMI3 - MX23_DMA_GPMI0 + 1, - GPMI_NAND_DMA_CHANNELS_RES_NAME, - IORESOURCE_DMA), - DEFINE_RES_IRQ_NAMED(MX23_INT_GPMI_DMA, - GPMI_NAND_DMA_INTERRUPT_RES_NAME), - }, -}; -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_gpmi_nand_data mx28_gpmi_nand_data __initconst = { - .devid = "imx28-gpmi-nand", - .res = { - /* GPMI */ - DEFINE_RES_MEM_NAMED(MX28_GPMI_BASE_ADDR, SZ_8K, - GPMI_NAND_GPMI_REGS_ADDR_RES_NAME), - DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI, - GPMI_NAND_GPMI_INTERRUPT_RES_NAME), - /* BCH */ - DEFINE_RES_MEM_NAMED(MX28_BCH_BASE_ADDR, SZ_8K, - GPMI_NAND_BCH_REGS_ADDR_RES_NAME), - DEFINE_RES_IRQ_NAMED(MX28_INT_BCH, - GPMI_NAND_BCH_INTERRUPT_RES_NAME), - /* DMA */ - DEFINE_RES_NAMED(MX28_DMA_GPMI0, - MX28_DMA_GPMI7 - MX28_DMA_GPMI0 + 1, - GPMI_NAND_DMA_CHANNELS_RES_NAME, - IORESOURCE_DMA), - DEFINE_RES_IRQ_NAMED(MX28_INT_GPMI_DMA, - GPMI_NAND_DMA_INTERRUPT_RES_NAME), - }, -}; -#endif - -struct platform_device *__init -mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, - const struct mxs_gpmi_nand_data *data) -{ - return mxs_add_platform_device_dmamask(data->devid, -1, - data->res, GPMI_NAND_RES_SIZE, - pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c b/arch/arm/mach-mxs/devices/platform-mxs-i2c.c deleted file mode 100644 index 79222ec8ede1..000000000000 --- a/arch/arm/mach-mxs/devices/platform-mxs-i2c.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2011 Pengutronix - * Wolfram Sang - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include - -#define mxs_i2c_data_entry_single(soc, _id) \ - { \ - .id = _id, \ - .iobase = soc ## _I2C ## _id ## _BASE_ADDR, \ - .errirq = soc ## _INT_I2C ## _id ## _ERROR, \ - .dmairq = soc ## _INT_I2C ## _id ## _DMA, \ - } - -#define mxs_i2c_data_entry(soc, _id) \ - [_id] = mxs_i2c_data_entry_single(soc, _id) - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_mxs_i2c_data mx28_mxs_i2c_data[] __initconst = { - mxs_i2c_data_entry(MX28, 0), - mxs_i2c_data_entry(MX28, 1), -}; -#endif - -struct platform_device *__init mxs_add_mxs_i2c( - const struct mxs_mxs_i2c_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->errirq, - .end = data->errirq, - .flags = IORESOURCE_IRQ, - }, { - .start = data->dmairq, - .end = data->dmairq, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("mxs-i2c", data->id, res, - ARRAY_SIZE(res), NULL, 0); -} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c deleted file mode 100644 index b33c9d05c552..000000000000 --- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig - * - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ - -#include -#include -#include - -#include -#include -#include - -#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \ - { \ - .devid = _devid, \ - .id = _id, \ - .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \ - .dma = soc ## _DMA_SSP ## hwid, \ - .irq_err = soc ## _INT_SSP ## hwid ## _ERROR, \ - .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \ - } - -#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \ - [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) - - -#ifdef CONFIG_SOC_IMX23 -const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1), - mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2), -}; -#endif - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0), - mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1), - mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2), - mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3), -}; -#endif - -struct platform_device *__init mxs_add_mxs_mmc( - const struct mxs_mxs_mmc_data *data, - const struct mxs_mmc_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->dma, - .end = data->dma, - .flags = IORESOURCE_DMA, - }, { - .start = data->irq_err, - .end = data->irq_err, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irq_dma, - .end = data->irq_dma, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device(data->devid, data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c b/arch/arm/mach-mxs/devices/platform-mxs-pwm.c deleted file mode 100644 index 680f5a902936..000000000000 --- a/arch/arm/mach-mxs/devices/platform-mxs-pwm.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Sascha Hauer - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include - -struct platform_device *__init mxs_add_mxs_pwm(resource_size_t iobase, int id) -{ - struct resource res = { - .flags = IORESOURCE_MEM, - }; - - res.start = iobase + 0x10 + 0x20 * id; - res.end = res.start + 0x1f; - - return mxs_add_platform_device("mxs-pwm", id, &res, 1, NULL, 0); -} diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c deleted file mode 100644 index f6e3a60b4201..000000000000 --- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -#define mxs_saif_data_entry_single(soc, _id) \ - { \ - .id = _id, \ - .iobase = soc ## _SAIF ## _id ## _BASE_ADDR, \ - .irq = soc ## _INT_SAIF ## _id, \ - .dma = soc ## _DMA_SAIF ## _id, \ - .dmairq = soc ## _INT_SAIF ## _id ##_DMA, \ - } - -#define mxs_saif_data_entry(soc, _id) \ - [_id] = mxs_saif_data_entry_single(soc, _id) - -#ifdef CONFIG_SOC_IMX28 -const struct mxs_saif_data mx28_saif_data[] __initconst = { - mxs_saif_data_entry(MX28, 0), - mxs_saif_data_entry(MX28, 1), -}; -#endif - -struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data, - const struct mxs_saif_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irq, - .end = data->irq, - .flags = IORESOURCE_IRQ, - }, { - .start = data->dma, - .end = data->dma, - .flags = IORESOURCE_DMA, - }, { - .start = data->dmairq, - .end = data->dmairq, - .flags = IORESOURCE_IRQ, - }, - - }; - - return mxs_add_platform_device("mxs-saif", data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c deleted file mode 100644 index 76b53f73418e..000000000000 --- a/arch/arm/mach-mxs/devices/platform-mxsfb.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2011 Pengutronix, Sascha Hauer - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_SOC_IMX23 -struct platform_device *__init mx23_add_mxsfb( - const struct mxsfb_platform_data *pdata) -{ - struct resource res[] = { - { - .start = MX23_LCDIF_BASE_ADDR, - .end = MX23_LCDIF_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - }; - - return mxs_add_platform_device_dmamask("imx23-fb", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} -#endif /* ifdef CONFIG_SOC_IMX23 */ - -#ifdef CONFIG_SOC_IMX28 -struct platform_device *__init mx28_add_mxsfb( - const struct mxsfb_platform_data *pdata) -{ - struct resource res[] = { - { - .start = MX28_LCDIF_BASE_ADDR, - .end = MX28_LCDIF_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - }; - - return mxs_add_platform_device_dmamask("imx28-fb", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); -} -#endif /* ifdef CONFIG_SOC_IMX28 */ diff --git a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c b/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c deleted file mode 100644 index 639eaee15553..000000000000 --- a/arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2011 Pengutronix, Wolfram Sang - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -#ifdef CONFIG_SOC_IMX23 -struct platform_device *__init mx23_add_rtc_stmp3xxx(void) -{ - struct resource res[] = { - { - .start = MX23_RTC_BASE_ADDR, - .end = MX23_RTC_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX23_INT_RTC_ALARM, - .end = MX23_INT_RTC_ALARM, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res), - NULL, 0); -} -#endif /* CONFIG_SOC_IMX23 */ - -#ifdef CONFIG_SOC_IMX28 -struct platform_device *__init mx28_add_rtc_stmp3xxx(void) -{ - struct resource res[] = { - { - .start = MX28_RTC_BASE_ADDR, - .end = MX28_RTC_BASE_ADDR + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX28_INT_RTC_ALARM, - .end = MX28_INT_RTC_ALARM, - .flags = IORESOURCE_IRQ, - }, - }; - - return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res), - NULL, 0); -} -#endif /* CONFIG_SOC_IMX28 */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h deleted file mode 100644 index e8b1d958240b..000000000000 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (C) 2009-2010 Pengutronix - * Uwe Kleine-Koenig - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include -#include -#include - -extern struct device mxs_apbh_bus; - -struct platform_device *mxs_add_platform_device_dmamask( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data, u64 dmamask); - -static inline struct platform_device *mxs_add_platform_device( - const char *name, int id, - const struct resource *res, unsigned int num_resources, - const void *data, size_t size_data) -{ - return mxs_add_platform_device_dmamask( - name, id, res, num_resources, data, size_data, 0); -} - -/* auart */ -struct mxs_auart_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_auart( - const struct mxs_auart_data *data); - -/* fec */ -#include -struct mxs_fec_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_fec( - const struct mxs_fec_data *data, - const struct fec_platform_data *pdata); - -/* flexcan */ -#include -struct mxs_flexcan_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irq; -}; -struct platform_device *__init mxs_add_flexcan( - const struct mxs_flexcan_data *data, - const struct flexcan_platform_data *pdata); - -/* gpmi-nand */ -#include -struct mxs_gpmi_nand_data { - const char *devid; - const struct resource res[GPMI_NAND_RES_SIZE]; -}; -struct platform_device *__init -mxs_add_gpmi_nand(const struct gpmi_nand_platform_data *pdata, - const struct mxs_gpmi_nand_data *data); - -/* i2c */ -struct mxs_mxs_i2c_data { - int id; - resource_size_t iobase; - resource_size_t errirq; - resource_size_t dmairq; -}; -struct platform_device * __init mxs_add_mxs_i2c( - const struct mxs_mxs_i2c_data *data); - -/* mmc */ -#include -struct mxs_mxs_mmc_data { - const char *devid; - int id; - resource_size_t iobase; - resource_size_t dma; - resource_size_t irq_err; - resource_size_t irq_dma; -}; -struct platform_device *__init mxs_add_mxs_mmc( - const struct mxs_mxs_mmc_data *data, - const struct mxs_mmc_platform_data *pdata); - -/* pwm */ -struct platform_device *__init mxs_add_mxs_pwm( - resource_size_t iobase, int id); - -/* saif */ -#include -struct mxs_saif_data { - int id; - resource_size_t iobase; - resource_size_t irq; - resource_size_t dma; - resource_size_t dmairq; -}; - -struct platform_device *__init mxs_add_saif( - const struct mxs_saif_data *data, - const struct mxs_saif_platform_data *pdata); -- cgit v1.2.3-58-ga151 From 55e8bf4e18f7fdc6d621379ed4ca0fd836e9915c Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 6 Aug 2012 23:11:22 +0800 Subject: ARM: mxs: remove iomux driver With all board files removed, there is no user of iomux driver. Remove it. Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/Makefile | 2 +- arch/arm/mach-mxs/include/mach/iomux-mx23.h | 355 ------------------ arch/arm/mach-mxs/include/mach/iomux-mx28.h | 537 ---------------------------- arch/arm/mach-mxs/include/mach/iomux.h | 168 --------- arch/arm/mach-mxs/iomux.c | 101 ------ 5 files changed, 1 insertion(+), 1162 deletions(-) delete mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx23.h delete mode 100644 arch/arm/mach-mxs/include/mach/iomux-mx28.h delete mode 100644 arch/arm/mach-mxs/include/mach/iomux.h delete mode 100644 arch/arm/mach-mxs/iomux.c diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 2480ce99c6c4..3d3c8a973062 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := icoll.o iomux.o ocotp.o system.o timer.o mm.o +obj-y := icoll.o ocotp.o system.o timer.o mm.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h deleted file mode 100644 index b0190a4822f2..000000000000 --- a/arch/arm/mach-mxs/include/mach/iomux-mx23.h +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Copyright (C) 2009-2010 Amit Kucheria - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_IOMUX_MX23_H__ -#define __MACH_IOMUX_MX23_H__ - -#include - -/* - * The naming convention for the pad modes is MX23_PAD___ - * If or refers to a GPIO, it is named GPIO__ - * See also iomux.h - * - * BANK PIN MUX - */ -/* MUXSEL_0 */ -#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) -#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0) -#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0) -#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0) - -#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) -#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) -#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) -#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) -#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) -#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) -#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) -#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) -#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) -#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) -#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) -#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) -#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) -#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) -#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) - -#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) -#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) -#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) -#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) -#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) -#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0) -#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) -#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0) -#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0) -#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0) - -#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) -#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) -#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) -#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) - -/* MUXSEL_1 */ -#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) -#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) -#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1) -#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1) -#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1) - -#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1) -#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1) -#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1) -#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1) -#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) -#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) -#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) -#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) -#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) -#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) -#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) -#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) -#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) - -#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1) -#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1) -#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) -#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) -#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1) - -/* MUXSEL_2 */ -#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) -#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2) -#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2) -#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2) -#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2) - -#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) -#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) -#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) -#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2) -#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2) -#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) -#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) - -#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2) -#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2) -#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2) -#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2) - -/* MUXSEL_GPIO */ -#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO) - -#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) - -#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) -#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) -#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) -#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO) -#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO) - -#endif /* __MACH_IOMUX_MX23_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h deleted file mode 100644 index f50fefd10520..000000000000 --- a/arch/arm/mach-mxs/include/mach/iomux-mx28.h +++ /dev/null @@ -1,537 +0,0 @@ -/* - * Copyright (C) 2009-2010 Amit Kucheria - * Copyright (C) 2010 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#ifndef __MACH_IOMUX_MX28_H__ -#define __MACH_IOMUX_MX28_H__ - -#include - -/* - * The naming convention for the pad modes is MX28_PAD___ - * If or refers to a GPIO, it is named GPIO__ - * See also iomux.h - * - * BANK PIN MUX - */ -/* MUXSEL_0 */ -#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0) -#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0) - -#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0) -#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0) -#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0) -#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0) -#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0) -#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0) -#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0) -#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0) -#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0) -#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0) - -#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0) -#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0) -#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0) -#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0) -#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0) -#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0) -#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0) -#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0) -#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0) -#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0) -#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0) - -#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0) -#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0) -#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0) -#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0) -#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0) -#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0) -#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0) -#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0) -#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0) -#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0) -#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0) -#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0) -#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0) -#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0) -#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0) -#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0) -#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0) -#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0) -#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0) -#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0) -#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0) -#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0) -#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0) -#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0) -#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0) -#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0) -#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0) -#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0) -#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0) -#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0) - -#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0) -#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0) -#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0) -#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0) - -#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0) -#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0) -#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0) -#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0) -#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0) -#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0) - -#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0) -#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0) -#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0) -#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0) -#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0) -#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0) -#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0) -#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0) -#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0) -#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0) -#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0) - -/* MUXSEL_1 */ -#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1) -#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1) - -#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1) -#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1) -#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1) -#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1) -#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1) -#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1) -#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1) -#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1) -#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1) - -#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1) -#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1) -#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1) -#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1) -#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1) -#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1) -#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1) -#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1) -#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1) -#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1) -#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1) -#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1) -#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1) - -#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1) -#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1) -#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1) -#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1) -#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1) -#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1) -#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1) -#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1) -#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1) -#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1) -#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1) -#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1) -#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1) -#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1) -#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1) -#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1) -#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1) -#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1) -#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1) -#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1) -#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1) -#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1) -#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1) -#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1) -#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1) -#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1) -#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1) - -#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1) -#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1) - -/* MUXSEL_2 */ -#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2) -#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2) - -#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2) -#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2) -#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2) -#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2) -#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2) -#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2) - -#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2) -#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2) -#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2) -#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2) -#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2) -#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2) -#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2) -#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2) -#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2) - -#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2) -#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2) -#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2) -#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2) -#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2) -#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2) -#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2) -#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2) -#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2) -#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2) -#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2) -#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2) -#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2) -#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2) -#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2) -#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2) -#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2) -#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2) -#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2) -#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2) -#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2) -#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2) -#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2) -#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2) -#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2) -#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2) -#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2) - -#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2) -#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2) - -/* MUXSEL_GPIO */ -#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO) -#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO) - -#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO) - -#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO) -#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO) - -#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO) -#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO) -#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO) -#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO) -#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO) -#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO) -#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO) -#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO) -#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO) -#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO) -#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO) -#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO) -#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO) -#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO) -#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO) -#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO) - -#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO) -#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO) -#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO) - -#endif /* __MACH_IOMUX_MX28_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h deleted file mode 100644 index 7abdf58b8bb7..000000000000 --- a/arch/arm/mach-mxs/include/mach/iomux.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, - * - * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_MXS_IOMUX_H__ -#define __MACH_MXS_IOMUX_H__ - -/* - * IOMUX/PAD Bit field definitions - * - * PAD_BANK: 0..2 (3) - * PAD_PIN: 3..7 (5) - * PAD_MUXSEL: 8..9 (2) - * PAD_MA: 10..11 (2) - * PAD_MA_VALID: 12 (1) - * PAD_VOL: 13 (1) - * PAD_VOL_VALID: 14 (1) - * PAD_PULL: 15 (1) - * PAD_PULL_VALID: 16 (1) - * RESERVED: 17..31 (15) - */ -typedef u32 iomux_cfg_t; - -#define MXS_PAD_BANK_SHIFT 0 -#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT) -#define MXS_PAD_PIN_SHIFT 3 -#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT) -#define MXS_PAD_MUXSEL_SHIFT 8 -#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT) -#define MXS_PAD_MA_SHIFT 10 -#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT) -#define MXS_PAD_MA_VALID_SHIFT 12 -#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT) -#define MXS_PAD_VOL_SHIFT 13 -#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT) -#define MXS_PAD_VOL_VALID_SHIFT 14 -#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT) -#define MXS_PAD_PULL_SHIFT 15 -#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT) -#define MXS_PAD_PULL_VALID_SHIFT 16 -#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT) - -#define PAD_MUXSEL_0 0 -#define PAD_MUXSEL_1 1 -#define PAD_MUXSEL_2 2 -#define PAD_MUXSEL_GPIO 3 - -#define PAD_4MA 0 -#define PAD_8MA 1 -#define PAD_12MA 2 -#define PAD_16MA 3 - -#define PAD_1V8 0 -#define PAD_3V3 1 - -#define PAD_NOPULL 0 -#define PAD_PULLUP 1 - -#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \ - MXS_PAD_MA_VALID_MASK) -#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \ - MXS_PAD_MA_VALID_MASK) -#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \ - MXS_PAD_MA_VALID_MASK) -#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \ - MXS_PAD_MA_VALID_MASK) - -#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \ - MXS_PAD_VOL_VALID_MASK) -#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \ - MXS_PAD_VOL_VALID_MASK) - -#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \ - MXS_PAD_PULL_VALID_MASK) -#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \ - MXS_PAD_PULL_VALID_MASK) - -/* generic pad control used in most cases */ -#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL) - -#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \ - (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \ - ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \ - ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \ - ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \ - ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \ - ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT)) - -/* - * A pad becomes naked, when none of mA, vol or pull - * validity bits is set. - */ -#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \ - MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0) - -static inline unsigned int PAD_BANK(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT; -} - -static inline unsigned int PAD_PIN(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT; -} - -static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT; -} - -static inline unsigned int PAD_MA(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT; -} - -static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT; -} - -static inline unsigned int PAD_VOL(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT; -} - -static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT; -} - -static inline unsigned int PAD_PULL(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT; -} - -static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad) -{ - return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT; -} - -/* - * configures a single pad in the iomuxer - */ -int mxs_iomux_setup_pad(iomux_cfg_t pad); - -/* - * configures multiple pads - * convenient way to call the above function with tables - */ -int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); - -#endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c deleted file mode 100644 index 0e804e2f11f4..000000000000 --- a/arch/arm/mach-mxs/iomux.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer - * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include - -/* - * configures a single pad in the iomuxer - */ -int mxs_iomux_setup_pad(iomux_cfg_t pad) -{ - u32 reg, ofs, bp, bm; - void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR); - - /* muxsel */ - ofs = 0x100; - ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10; - bp = PAD_PIN(pad) % 16 * 2; - bm = 0x3 << bp; - reg = __raw_readl(iomux_base + ofs); - reg &= ~bm; - reg |= PAD_MUXSEL(pad) << bp; - __raw_writel(reg, iomux_base + ofs); - - /* drive */ - ofs = cpu_is_mx23() ? 0x200 : 0x300; - ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10; - /* mA */ - if (PAD_MA_VALID(pad)) { - bp = PAD_PIN(pad) % 8 * 4; - bm = 0x3 << bp; - reg = __raw_readl(iomux_base + ofs); - reg &= ~bm; - reg |= PAD_MA(pad) << bp; - __raw_writel(reg, iomux_base + ofs); - } - /* vol */ - if (PAD_VOL_VALID(pad)) { - bp = PAD_PIN(pad) % 8 * 4 + 2; - if (PAD_VOL(pad)) - __mxs_setl(1 << bp, iomux_base + ofs); - else - __mxs_clrl(1 << bp, iomux_base + ofs); - } - - /* pull */ - if (PAD_PULL_VALID(pad)) { - ofs = cpu_is_mx23() ? 0x400 : 0x600; - ofs += PAD_BANK(pad) * 0x10; - bp = PAD_PIN(pad); - if (PAD_PULL(pad)) - __mxs_setl(1 << bp, iomux_base + ofs); - else - __mxs_clrl(1 << bp, iomux_base + ofs); - } - - return 0; -} - -int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count) -{ - const iomux_cfg_t *p = pad_list; - int i; - int ret; - - for (i = 0; i < count; i++) { - ret = mxs_iomux_setup_pad(*p); - if (ret) - return ret; - p++; - } - - return 0; -} -- cgit v1.2.3-58-ga151 From d8bbb55266f48e4c227ade192244a692710b9aae Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 20 Aug 2012 13:38:15 +0800 Subject: ARM: pxa: append the definition of CKENC Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/include/mach/pxa3xx-regs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h index 207ecb49a61b..f4d48d20754e 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h @@ -131,6 +131,7 @@ #define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ #define CKENA __REG(0x4134000C) /* A Clock Enable Register */ #define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define CKENC __REG(0x41340024) /* C Clock Enable Register */ #define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ #define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ -- cgit v1.2.3-58-ga151 From 6e308f87c821e5b9316d9eb69e96d8a33910412a Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 20 Aug 2012 13:40:31 +0800 Subject: mtd: nand: append missing parameter and value Signed-off-by: Haojian Zhuang --- drivers/mtd/nand/pxa3xx_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index b0319d8934ad..d944d6ef7da8 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1034,7 +1034,7 @@ static int alloc_nand_resource(struct platform_device *pdev) struct pxa3xx_nand_platform_data *pdata; struct pxa3xx_nand_info *info; struct pxa3xx_nand_host *host; - struct nand_chip *chip; + struct nand_chip *chip = NULL; struct mtd_info *mtd; struct resource *r; int ret, irq, cs; @@ -1244,7 +1244,7 @@ static int pxa3xx_nand_probe_dt(struct platform_device *pdev) return 0; } #else -static inline int pxa3xx_nand_probe_dt(struct platform_device *) +static inline int pxa3xx_nand_probe_dt(struct platform_device *pdev) { return 0; } -- cgit v1.2.3-58-ga151 From e6c509c8ef85155bf504254399d758384a3b2e38 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 20 Aug 2012 13:46:51 +0800 Subject: ARM: pxa: fix build issue while CONFIG_OF is disabled arch/arm/mach-pxa/built-in.o: In function `pxa3xx_dt_init_irq': saar.c:(.init.text+0x604): undefined reference to `pxa_dt_irq_init' Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/pxa3xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 4a9d04a57de5..ff9c9574ec3e 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -402,11 +402,13 @@ void __init pxa3xx_init_irq(void) pxa_init_irq(56, pxa3xx_set_wake); } +#ifdef CONFIG_OF void __init pxa3xx_dt_init_irq(void) { __pxa3xx_init_irq(); pxa_dt_irq_init(pxa3xx_set_wake); } +#endif /* CONFIG_OF */ static struct map_desc pxa3xx_io_desc[] __initdata = { { /* Mem Ctl */ -- cgit v1.2.3-58-ga151 From e0e35b48a81d7bf4d9894b6e506ad8fbf8abf811 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Aug 2012 13:25:31 -0300 Subject: ARM: mxs: Rename 'hog-gpios' hog_pins is used to setup the pin functions, and it is not neccesarily used only for GPIO pins, so use only 'hog' to describe a more generic term. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-evk.dts | 2 +- arch/arm/boot/dts/imx23-stmp378x_devb.dts | 2 +- arch/arm/boot/dts/imx28-apx4devkit.dts | 2 +- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx28-tx28.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index e3486f486b40..1093dd55c87a 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -42,7 +42,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 757a327ff3e8..85c3864b6a56 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b383417a558f..5171667a7763 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 773c0e84d1fb..ab78ee53fdc7 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -50,7 +50,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 183a3fd2d859..ac3eff96a70c 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -69,7 +69,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index a56ae05f9fa9..37be532f0055 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -25,7 +25,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ -- cgit v1.2.3-58-ga151 From 74b42123f2605ab83bb264fac8ea57cd33e2580c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Aug 2012 13:25:32 -0300 Subject: ARM: mxs: Let mmc0 pin detect be generic Instead of assigning SSP1_DETECT inside mmc0_4bit_pins_a, let the board dts handle this setup. Not every board will use MX23_PAD_SSP1_DETECT as SSP1 functionality. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-evk.dts | 1 + arch/arm/boot/dts/imx23.dtsi | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 1093dd55c87a..035c13f9d3c0 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -48,6 +48,7 @@ 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9700872794d0..b00f3cfb3bf8 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -194,7 +194,6 @@ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ >; fsl,drive-strength = <1>; -- cgit v1.2.3-58-ga151 From ba5db4990c2d1774fe854de3e3f6398fe9074fde Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 22 Aug 2012 13:25:33 -0300 Subject: ARM: olinuxino: Add gpio-led support Olinuxino has a LED connected to MX23_PAD_SSP1_DETECT__GPIO_2_1 pin. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index a28687303e49..711dcf5742b6 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -31,6 +31,21 @@ bus-width = <4>; status = "okay"; }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; }; apbx@80040000 { @@ -47,4 +62,14 @@ }; }; }; + + leds { + compatible = "gpio-leds"; + + user { + label = "green"; + gpios = <&gpio2 1 0>; + linux,default-trigger = "default-on"; + }; + }; }; -- cgit v1.2.3-58-ga151 From a9d1f92407a2114aff580a2e28803d64b4c437e0 Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Wed, 18 Jul 2012 11:42:43 +0200 Subject: ARM i.MX53: dts: add flexcan to imx53 Cc: Sascha Hauer Signed-off-by: Steffen Trumtrar Signed-off-by: Marc Kleine-Budde Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index cd37165edce5..0132078aca03 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -203,6 +203,20 @@ status = "disabled"; }; + can1: can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + status = "disabled"; + }; + + can2: can@53fcc000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fcc000 0x4000>; + interrupts = <83>; + status = "disabled"; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; -- cgit v1.2.3-58-ga151 From 03b276505435927b5c4f7d246557a991fbedad92 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 30 Jul 2012 11:03:16 -0300 Subject: ARM: dts: imx: Always enable the watchdog Instead of enabling the watchdog in each individual dts file, select in the SoC dtsi file instead. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27-phytec-phycore.dts | 4 ---- arch/arm/boot/dts/imx27.dtsi | 1 - arch/arm/boot/dts/imx51-babbage.dts | 4 ---- arch/arm/boot/dts/imx51.dtsi | 1 - arch/arm/boot/dts/imx53-ard.dts | 4 ---- arch/arm/boot/dts/imx53-evk.dts | 4 ---- arch/arm/boot/dts/imx53-qsb.dts | 4 ---- arch/arm/boot/dts/imx53-smd.dts | 4 ---- arch/arm/boot/dts/imx53.dtsi | 1 - arch/arm/boot/dts/imx6q.dtsi | 1 - 10 files changed, 28 deletions(-) diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 2b0ff60247a4..777caa33cd85 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 5303ab680a34..3e54f1498841 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -62,7 +62,6 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; - status = "disabled"; }; uart1: serial@1000a000 { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea2..ce08d19f8414 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -169,10 +169,6 @@ }; }; - wdog@73f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc-babbage"; reg = <0x73fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index aba28dc87fc8..140fd28de6ab 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -174,7 +174,6 @@ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@73f9c000 { /* WDOG2 */ diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index da895e93a999..d356f10dd35a 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -31,10 +31,6 @@ }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc-ard"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 9c798034675e..5d36dde14038 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -62,10 +62,6 @@ }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc-evk"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 2d803a9a6949..3bfa6f147296 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -41,10 +41,6 @@ }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc-qsb"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 08091029168e..45848afab1bd 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -77,10 +77,6 @@ }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc-smd"; reg = <0x53fa8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 0132078aca03..25b216e610f5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -179,7 +179,6 @@ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@53f9c000 { /* WDOG2 */ diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index fd57079f71a9..a8cd96eed298 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -362,7 +362,6 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; - status = "disabled"; }; wdog@020c0000 { /* WDOG2 */ -- cgit v1.2.3-58-ga151 From 7e4f03657d3751adda76f1fecf12283bf8082af8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 8 Aug 2012 11:28:07 -0300 Subject: ARM: dts: imx: Move SDMA firmware to SoC dtsi file Instead of adding sdma-ram-script-name into each board dts file, move it to the SoC dtsi file instead. Signed-off-by: Fabio Estevam Acked-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 4 ---- arch/arm/boot/dts/imx51.dtsi | 1 + arch/arm/boot/dts/imx53-ard.dts | 6 ------ arch/arm/boot/dts/imx53-evk.dts | 4 ---- arch/arm/boot/dts/imx53-qsb.dts | 4 ---- arch/arm/boot/dts/imx53-smd.dts | 4 ---- arch/arm/boot/dts/imx53.dtsi | 1 + 7 files changed, 2 insertions(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index ce08d19f8414..68460008f662 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -185,10 +185,6 @@ }; aips@80000000 { /* aips-2 */ - sdma@83fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; - }; - i2c@83fc4000 { /* I2C2 */ status = "okay"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 140fd28de6ab..b166e8a5242c 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -218,6 +218,7 @@ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; cspi@83fc0000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index d356f10dd35a..e6a189096017 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -40,12 +40,6 @@ status = "okay"; }; }; - - aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - }; }; eim-cs1@f4000000 { diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 5d36dde14038..86aebc5b4091 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -73,10 +73,6 @@ }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 3bfa6f147296..a0e816f2182b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -52,10 +52,6 @@ }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 45848afab1bd..8cdf0a2b0ff3 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -92,10 +92,6 @@ }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 25b216e610f5..4994e01a1838 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -290,6 +290,7 @@ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; cspi@63fc0000 { -- cgit v1.2.3-58-ga151 From 7811aa94f45474fea070c327d5edfe7bc4b15d2a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 9 Aug 2012 15:35:33 +0200 Subject: ARM: imx/imx31-dt: drop selecting USE_OF MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit since commit 3e62af8 (ARM: imx: select USE_OF) ARM_MXC already selects USE_OF, so there is no need to repeat it for MACH_IMX31_DT Signed-off-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index afd542ad6f97..156c98629624 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -561,7 +561,6 @@ config MACH_BUG config MACH_IMX31_DT bool "Support i.MX31 platforms from device tree" select SOC_IMX31 - select USE_OF help Include support for Freescale i.MX31 based platforms using the device tree for discovery. -- cgit v1.2.3-58-ga151 From d23f13f75628415b4de82d870814bd208b97cb4d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Aug 2012 11:26:30 -0300 Subject: ARM: mach-imx: Remove board entries in dt_board_compat There is no need for adding board related entries into dt_board_compat. Leave only the SoC entry. This way we do not need to patch a C file when adding dt support for a new board. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/mach-imx/imx51-dt.c | 1 - arch/arm/mach-imx/imx53-dt.c | 4 ---- arch/arm/mach-imx/mach-imx6q.c | 3 --- 3 files changed, 8 deletions(-) diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index d4067fe36357..8604165b2a57 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -79,7 +79,6 @@ static struct sys_timer imx51_timer = { }; static const char *imx51_dt_board_compat[] __initdata = { - "fsl,imx51-babbage", "fsl,imx51", NULL }; diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 1b7a2fc36591..d193d8f1334f 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -105,10 +105,6 @@ static struct sys_timer imx53_timer = { }; static const char *imx53_dt_board_compat[] __initdata = { - "fsl,imx53-ard", - "fsl,imx53-evk", - "fsl,imx53-qsb", - "fsl,imx53-smd", "fsl,imx53", NULL }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a76..7a9599fcbf82 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -218,9 +218,6 @@ static struct sys_timer imx6q_timer = { }; static const char *imx6q_dt_compat[] __initdata = { - "fsl,imx6q-arm2", - "fsl,imx6q-sabrelite", - "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; -- cgit v1.2.3-58-ga151 From 212d0b8327b21d6dfe0a9e9dc8935a7150e370d0 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 23 Aug 2012 12:35:57 +0200 Subject: ARM: dts: imx: add imx5x usb entries Signed-off-by: Michael Grzeschik Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51.dtsi | 28 ++++++++++++++++++++++++++++ arch/arm/boot/dts/imx53.dtsi | 28 ++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+) diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index b166e8a5242c..6aedb323f184 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -130,6 +130,34 @@ }; }; + usb@73f80000 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@73f80200 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@73f80400 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@73f80600 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 4994e01a1838..776ce410d057 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,6 +135,34 @@ }; }; + usb@53f80000 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@53f80200 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@53f80400 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@53f80600 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; -- cgit v1.2.3-58-ga151 From f60c99e22cae4d8761c86967a14e4621322c057e Mon Sep 17 00:00:00 2001 From: Matt Sealey Date: Wed, 1 Aug 2012 12:49:28 -0500 Subject: ARM: efikamx: remove support for Genesi Efika MX from the build Disable building for Efika MX boards by not having any configuration or object file definitions. Signed-off-by: Matt Sealey Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 26 -------------------------- arch/arm/mach-imx/Makefile | 3 --- 2 files changed, 29 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 156c98629624..e4aa08217260 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -736,32 +736,6 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - comment "i.MX53 machines:" config MACH_IMX53_DT diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cf..88b756c4082b 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -89,9 +89,6 @@ obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -- cgit v1.2.3-58-ga151 From 56a12b3984a368b1feab41a77f58fe81cc6771bf Mon Sep 17 00:00:00 2001 From: Matt Sealey Date: Wed, 1 Aug 2012 12:49:29 -0500 Subject: ARM: efikamx: remove Genesi Efika MX from the i.MX v6/v7 defconfig No need to have Efika MX listed in the defconfig if it can't be built. Signed-off-by: Matt Sealey Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3c9f32f9b6b4..400ef342d13e 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -32,8 +32,6 @@ CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51SD=y -CONFIG_MACH_MX51_EFIKAMX=y -CONFIG_MACH_MX51_EFIKASB=y CONFIG_MACH_IMX53_DT=y CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y -- cgit v1.2.3-58-ga151 From c7c29b3aeb318b9efe3035cacf42800dfe2970f5 Mon Sep 17 00:00:00 2001 From: Matt Sealey Date: Wed, 1 Aug 2012 12:49:30 -0500 Subject: ARM: efikamx: remove Genesi Efika MX platform files from the tree Delete the files that can no longer be built. Signed-off-by: Matt Sealey Signed-off-by: Shawn Guo --- arch/arm/mach-imx/efika.h | 10 - arch/arm/mach-imx/mach-mx51_efikamx.c | 300 ---------------- arch/arm/mach-imx/mach-mx51_efikasb.c | 296 ---------------- arch/arm/mach-imx/mx51_efika.c | 633 ---------------------------------- 4 files changed, 1239 deletions(-) delete mode 100644 arch/arm/mach-imx/efika.h delete mode 100644 arch/arm/mach-imx/mach-mx51_efikamx.c delete mode 100644 arch/arm/mach-imx/mach-mx51_efikasb.c delete mode 100644 arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h deleted file mode 100644 index 014aa985faae..000000000000 --- a/arch/arm/mach-imx/efika.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _EFIKA_H -#define _EFIKA_H - -#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16) -#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10) -#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9) - -void __init efika_board_common_init(void); - -#endif diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c deleted file mode 100644 index 8d09c0126cab..000000000000 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright (C) 2010 Linaro Limited - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) -#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) -#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11) - -#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13) -#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14) -#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15) - -#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) - -/* board 1.1 doesn't have same reset gpio */ -#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) -#define EFIKAMX_RESET IMX_GPIO_NR(1, 4) - -#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -/* the pci ids pin have pull up. they're driven low according to board id */ -#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) - -static iomux_v3_cfg_t mx51efikamx_pads[] = { - /* board id */ - MX51_PAD_PCBID0, - MX51_PAD_PCBID1, - MX51_PAD_PCBID2, - - /* leds */ - MX51_PAD_CSI1_D9__GPIO3_13, - MX51_PAD_CSI1_VSYNC__GPIO3_14, - MX51_PAD_CSI1_HSYNC__GPIO3_15, - - /* power key */ - MX51_PAD_PWRKEY, - - /* reset */ - MX51_PAD_DI1_PIN13__GPIO3_2, - MX51_PAD_GPIO1_4__GPIO1_4, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, -}; - -/* PCBID2 PCBID1 PCBID0 STATE - 1 1 1 ER1:rev1.1 - 1 1 0 ER2:rev1.2 - 1 0 1 ER3:rev1.3 - 1 0 0 ER4:rev1.4 -*/ -static void __init mx51_efikamx_board_id(void) -{ - int id; - - /* things are taking time to settle */ - msleep(150); - - gpio_request(EFIKAMX_PCBID0, "pcbid0"); - gpio_direction_input(EFIKAMX_PCBID0); - gpio_request(EFIKAMX_PCBID1, "pcbid1"); - gpio_direction_input(EFIKAMX_PCBID1); - gpio_request(EFIKAMX_PCBID2, "pcbid2"); - gpio_direction_input(EFIKAMX_PCBID2); - - id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; - id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; - - switch (id) { - case 7: - system_rev = 0x11; - break; - case 6: - system_rev = 0x12; - break; - case 5: - system_rev = 0x13; - break; - case 4: - system_rev = 0x14; - break; - default: - system_rev = 0x10; - break; - } - - if ((system_rev == 0x10) - || (system_rev == 0x12) - || (system_rev == 0x14)) { - printk(KERN_WARNING - "EfikaMX: Unsupported board revision 1.%u!\n", - system_rev & 0xf); - } -} - -static struct gpio_led mx51_efikamx_leds[] __initdata = { - { - .name = "efikamx:green", - .default_trigger = "default-on", - .gpio = EFIKAMX_GREEN_LED, - }, - { - .name = "efikamx:red", - .default_trigger = "ide-disk", - .gpio = EFIKAMX_RED_LED, - }, - { - .name = "efikamx:blue", - .default_trigger = "mmc0", - .gpio = EFIKAMX_BLUE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikamx_leds_data __initconst = { - .leds = mx51_efikamx_leds, - .num_leds = ARRAY_SIZE(mx51_efikamx_leds), -}; - -static struct esdhc_platform_data sd_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct gpio_keys_button mx51_efikamx_powerkey[] = { - { - .code = KEY_POWER, - .gpio = EFIKAMX_POWER_KEY, - .type = EV_PWR, - .desc = "Power Button (CM)", - .wakeup = 1, - .debounce_interval = 10, /* ms */ - }, -}; - -static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = { - .buttons = mx51_efikamx_powerkey, - .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), -}; - -static void mx51_efikamx_restart(char mode, const char *cmd) -{ - if (system_rev == 0x11) - gpio_direction_output(EFIKAMX_RESET1_1, 0); - else - gpio_direction_output(EFIKAMX_RESET, 0); -} - -static struct regulator *pwgt1, *pwgt2, *coincell; - -static void mx51_efikamx_power_off(void) -{ - if (!IS_ERR(coincell)) - regulator_disable(coincell); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKAMX_POWEROFF, 1); -} - -static int __init mx51_efikamx_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKAMX_POWEROFF, "poweroff"); - pm_power_off = mx51_efikamx_power_off; - - /* enable coincell charger. maybe need a small power driver ? */ - coincell = regulator_get(NULL, "coincell"); - if (!IS_ERR(coincell)) { - regulator_set_voltage(coincell, 3000000, 3000000); - regulator_enable(coincell); - } - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikamx_init_late(void) -{ - imx51_init_late(); - mx51_efikamx_power_init(); -} - -static void __init mx51_efikamx_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, - ARRAY_SIZE(mx51efikamx_pads)); - efika_board_common_init(); - - mx51_efikamx_board_id(); - - /* on < 1.2 boards both SD controllers are used */ - if (system_rev < 0x12) { - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, &sd_pdata); - mx51_efikamx_leds[2].default_trigger = "mmc1"; - } else - imx51_add_sdhci_esdhc_imx(0, &sd_pdata); - - gpio_led_register_device(-1, &mx51_efikamx_leds_data); - imx_add_gpio_keys(&mx51_efikamx_powerkey_data); - - if (system_rev == 0x11) { - gpio_request(EFIKAMX_RESET1_1, "reset"); - gpio_direction_output(EFIKAMX_RESET1_1, 1); - } else { - gpio_request(EFIKAMX_RESET, "reset"); - gpio_direction_output(EFIKAMX_RESET, 1); - } - - /* - * enable wifi by default only on mx - * sb and mx have same wlan pin but the value to enable it are - * different :/ - */ - gpio_request(EFIKA_WLAN_EN, "wlan_en"); - gpio_direction_output(EFIKA_WLAN_EN, 0); - msleep(10); - - gpio_request(EFIKA_WLAN_RESET, "wlan_rst"); - gpio_direction_output(EFIKA_WLAN_RESET, 0); - msleep(10); - gpio_set_value(EFIKA_WLAN_RESET, 1); -} - -static void __init mx51_efikamx_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikamx_timer = { - .init = mx51_efikamx_timer_init, -}; - -MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mx51_efikamx_timer, - .init_machine = mx51_efikamx_init, - .init_late = mx51_efikamx_init_late, - .restart = mx51_efikamx_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c deleted file mode 100644 index fdbd181b97ef..000000000000 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (C) Arnaud Patard - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20) -#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3) -#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25) -#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28) -#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29) -#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31) -#define EFIKASB_LID IMX_GPIO_NR(3, 14) -#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13) -#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) - -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) -#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL) - -static iomux_v3_cfg_t mx51efikasb_pads[] = { - /* USB HOST2 */ - MX51_PAD_EIM_D16__USBH2_DATA0, - MX51_PAD_EIM_D17__USBH2_DATA1, - MX51_PAD_EIM_D18__USBH2_DATA2, - MX51_PAD_EIM_D19__USBH2_DATA3, - MX51_PAD_EIM_D20__USBH2_DATA4, - MX51_PAD_EIM_D21__USBH2_DATA5, - MX51_PAD_EIM_D22__USBH2_DATA6, - MX51_PAD_EIM_D23__USBH2_DATA7, - MX51_PAD_EIM_A24__USBH2_CLK, - MX51_PAD_EIM_A25__USBH2_DIR, - MX51_PAD_EIM_A26__USBH2_STP, - MX51_PAD_EIM_A27__USBH2_NXT, - - /* leds */ - MX51_PAD_EIM_CS0__GPIO2_25, - MX51_PAD_GPIO1_3__GPIO1_3, - - /* pcb id */ - MX51_PAD_EIM_CS3__GPIO2_28, - MX51_PAD_EIM_CS4__GPIO2_29, - - /* lid */ - MX51_PAD_CSI1_VSYNC__GPIO3_14, - - /* power key*/ - MX51_PAD_PWRKEY, - - /* wifi/bt button */ - MX51_PAD_DI1_PIN12__GPIO3_1, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, - - /* wdog reset */ - MX51_PAD_GPIO1_4__WDOG1_WDOG_B, - - /* BT */ - MX51_PAD_EIM_A17__GPIO2_11, - - MX51_PAD_SD1_CD, -}; - -static int initialize_usbh2_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP; - iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20; - - mxc_iomux_v3_setup_pad(usbh2gpio); - gpio_request(EFIKASB_USBH2_STP, "usbh2_stp"); - gpio_direction_output(EFIKASB_USBH2_STP, 0); - msleep(1); - gpio_set_value(EFIKASB_USBH2_STP, 1); - msleep(1); - - gpio_free(EFIKASB_USBH2_STP); - mxc_iomux_v3_setup_pad(usbh2stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh2_config __initdata = { - .init = initialize_usbh2_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init mx51_efikasb_usb(void) -{ - usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - if (usbh2_config.otg) - imx51_add_mxc_ehci_hs(2, &usbh2_config); -} - -static const struct gpio_led mx51_efikasb_leds[] __initconst = { - { - .name = "efikasb:green", - .default_trigger = "default-on", - .gpio = EFIKASB_GREEN_LED, - .active_low = 1, - }, - { - .name = "efikasb:white", - .default_trigger = "caps", - .gpio = EFIKASB_WHITE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikasb_leds_data __initconst = { - .leds = mx51_efikasb_leds, - .num_leds = ARRAY_SIZE(mx51_efikasb_leds), -}; - -static struct gpio_keys_button mx51_efikasb_keys[] = { - { - .code = KEY_POWER, - .gpio = EFIKASB_PWRKEY, - .type = EV_KEY, - .desc = "Power Button", - .wakeup = 1, - .active_low = 1, - }, - { - .code = SW_LID, - .gpio = EFIKASB_LID, - .type = EV_SW, - .desc = "Lid Switch", - .active_low = 1, - }, - { - .code = KEY_RFKILL, - .gpio = EFIKASB_RFKILL, - .type = EV_KEY, - .desc = "rfkill", - .active_low = 1, - }, -}; - -static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = { - .buttons = mx51_efikasb_keys, - .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), -}; - -static struct esdhc_platform_data sd0_pdata = { -#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27) - .cd_gpio = EFIKASB_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct regulator *pwgt1, *pwgt2; - -static void mx51_efikasb_power_off(void) -{ - gpio_set_value(EFIKA_USB_PHY_RESET, 0); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKASB_POWEROFF, 1); -} - -static int __init mx51_efikasb_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKASB_POWEROFF, "poweroff"); - pm_power_off = mx51_efikasb_power_off; - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikasb_init_late(void) -{ - imx51_init_late(); - mx51_efikasb_power_init(); -} - -/* 01 R1.3 board - 10 R2.0 board */ -static void __init mx51_efikasb_board_id(void) -{ - int id; - - gpio_request(EFIKASB_PCBID0, "pcb id0"); - gpio_direction_input(EFIKASB_PCBID0); - gpio_request(EFIKASB_PCBID1, "pcb id1"); - gpio_direction_input(EFIKASB_PCBID1); - - id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; - - switch (id) { - default: - break; - case 1: - system_rev = 0x13; - break; - case 2: - system_rev = 0x20; - break; - } -} - -static void __init efikasb_board_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, - ARRAY_SIZE(mx51efikasb_pads)); - efika_board_common_init(); - - mx51_efikasb_board_id(); - mx51_efikasb_usb(); - imx51_add_sdhci_esdhc_imx(0, &sd0_pdata); - imx51_add_sdhci_esdhc_imx(1, &sd1_pdata); - - gpio_led_register_device(-1, &mx51_efikasb_leds_data); - imx_add_gpio_keys(&mx51_efikasb_keys_data); -} - -static void __init mx51_efikasb_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikasb_timer = { - .init = mx51_efikasb_timer_init, -}; - -MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_machine = efikasb_board_init, - .init_late = mx51_efikasb_init_late, - .timer = &mx51_efikasb_timer, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c deleted file mode 100644 index ee870c49bc63..000000000000 --- a/arch/arm/mach-imx/mx51_efika.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" -#include "cpu_op-mx51.h" - -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 - -#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) -#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) - -#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -static iomux_v3_cfg_t mx51efika_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - - /* SD/MMC WP/CD */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, - - /* spi */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_CSPI1_RDY__ECSPI1_RDY, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_GPIO1_6__GPIO1_6, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB RESET */ - MX51_PAD_GPIO1_5__GPIO1_5, - - /* WLAN */ - MX51_PAD_EIM_A22__GPIO2_16, - MX51_PAD_EIM_A16__GPIO2_10, - - /* USB PHY RESET */ - MX51_PAD_EIM_D27__GPIO2_9, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* This function is board specific as the bit mask for the plldiv will also - * be different for other Freescale SoCs, thus a common bitmask is not - * possible and cannot get place in /plat-mxc/ehci.c. - */ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; - u32 v; - void __iomem *usb_base; - void __iomem *socregs_base; - - mxc_iomux_v3_setup_pad(usbh1gpio); - gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); - gpio_direction_output(EFIKAMX_USBH1_STP, 0); - msleep(1); - gpio_set_value(EFIKAMX_USBH1_STP, 1); - msleep(1); - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* The clock for the USBH1 ULPI port will come externally */ - /* from the PHY. */ - v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - socregs_base + MX51_USB_CTRL_1_OFFSET); - - iounmap(usb_base); - - gpio_free(EFIKAMX_USBH1_STP); - mxc_iomux_v3_setup_pad(usbh1stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh1_config __initdata = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void mx51_efika_hubreset(void) -{ - gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); - gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); -} - -static void __init mx51_efika_usb(void) -{ - mx51_efika_hubreset(); - - /* pulling it low, means no USB at all... */ - gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); - gpio_direction_output(EFIKA_USB_PHY_RESET, 0); - msleep(1); - gpio_set_value(EFIKA_USB_PHY_RESET, 1); - - usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - - imx51_add_mxc_ehci_otg(&dr_utmi_config); - if (usbh1_config.otg) - imx51_add_mxc_ehci_hs(1, &usbh1_config); -} - -static struct mtd_partition mx51_efika_spi_nor_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - }, -}; - -static struct flash_platform_data mx51_efika_spi_flash_data = { - .name = "spi_flash", - .parts = mx51_efika_spi_nor_partitions, - .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), - .type = "sst25vf032b", -}; - -static struct regulator_consumer_supply sw1_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_consumer_supply vdig_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDA", "1-000a"), - REGULATOR_SUPPLY("VDDD", "1-000a"), -}; - -static struct regulator_consumer_supply vvideo_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDIO", "1-000a"), -}; - -static struct regulator_consumer_supply vsd_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"), - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"), -}; - -static struct regulator_consumer_supply pwgt1_consumer[] = { - { - .supply = "pwgt1", - } -}; - -static struct regulator_consumer_supply pwgt2_consumer[] = { - { - .supply = "pwgt2", - } -}; - -static struct regulator_consumer_supply coincell_consumer[] = { - { - .supply = "coincell", - } -}; - -static struct regulator_init_data sw1_init = { - .constraints = { - .name = "SW1", - .min_uV = 600000, - .max_uV = 1375000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = 0, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 850000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), - .consumer_supplies = sw1_consumers, -}; - -static struct regulator_init_data sw2_init = { - .constraints = { - .name = "SW2", - .min_uV = 900000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 950000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - } -}; - -static struct regulator_init_data sw3_init = { - .constraints = { - .name = "SW3", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw4_init = { - .constraints = { - .name = "SW4", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data viohi_init = { - .constraints = { - .name = "VIOHI", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb_init = { - .constraints = { - .name = "VUSB", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data swbst_init = { - .constraints = { - .name = "SWBST", - } -}; - -static struct regulator_init_data vdig_init = { - .constraints = { - .name = "VDIG", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), - .consumer_supplies = vdig_consumers, -}; - -static struct regulator_init_data vpll_init = { - .constraints = { - .name = "VPLL", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb2_init = { - .constraints = { - .name = "VUSB2", - .min_uV = 2400000, - .max_uV = 2775000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vvideo_init = { - .constraints = { - .name = "VVIDEO", - .min_uV = 2775000, - .max_uV = 2775000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), - .consumer_supplies = vvideo_consumers, -}; - -static struct regulator_init_data vaudio_init = { - .constraints = { - .name = "VAUDIO", - .min_uV = 2300000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - } -}; - -static struct regulator_init_data vsd_init = { - .constraints = { - .name = "VSD", - .min_uV = 1800000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), - .consumer_supplies = vsd_consumers, -}; - -static struct regulator_init_data vcam_init = { - .constraints = { - .name = "VCAM", - .min_uV = 2500000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, - .boot_on = 1, - } -}; - -static struct regulator_init_data vgen1_init = { - .constraints = { - .name = "VGEN1", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen2_init = { - .constraints = { - .name = "VGEN2", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen3_init = { - .constraints = { - .name = "VGEN3", - .min_uV = 1800000, - .max_uV = 2900000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data gpo1_init = { - .constraints = { - .name = "GPO1", - } -}; - -static struct regulator_init_data gpo2_init = { - .constraints = { - .name = "GPO2", - } -}; - -static struct regulator_init_data gpo3_init = { - .constraints = { - .name = "GPO3", - } -}; - -static struct regulator_init_data gpo4_init = { - .constraints = { - .name = "GPO4", - } -}; - -static struct regulator_init_data pwgt1_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), - .consumer_supplies = pwgt1_consumer, -}; - -static struct regulator_init_data pwgt2_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), - .consumer_supplies = pwgt2_consumer, -}; - -static struct regulator_init_data vcoincell_init = { - .constraints = { - .name = "COINCELL", - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), - .consumer_supplies = coincell_consumer, -}; - -static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { - { .id = MC13892_SW1, .init_data = &sw1_init }, - { .id = MC13892_SW2, .init_data = &sw2_init }, - { .id = MC13892_SW3, .init_data = &sw3_init }, - { .id = MC13892_SW4, .init_data = &sw4_init }, - { .id = MC13892_SWBST, .init_data = &swbst_init }, - { .id = MC13892_VIOHI, .init_data = &viohi_init }, - { .id = MC13892_VPLL, .init_data = &vpll_init }, - { .id = MC13892_VDIG, .init_data = &vdig_init }, - { .id = MC13892_VSD, .init_data = &vsd_init }, - { .id = MC13892_VUSB2, .init_data = &vusb2_init }, - { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, - { .id = MC13892_VCAM, .init_data = &vcam_init }, - { .id = MC13892_VGEN1, .init_data = &vgen1_init }, - { .id = MC13892_VGEN2, .init_data = &vgen2_init }, - { .id = MC13892_VGEN3, .init_data = &vgen3_init }, - { .id = MC13892_VUSB, .init_data = &vusb_init }, - { .id = MC13892_GPO1, .init_data = &gpo1_init }, - { .id = MC13892_GPO2, .init_data = &gpo2_init }, - { .id = MC13892_GPO3, .init_data = &gpo3_init }, - { .id = MC13892_GPO4, .init_data = &gpo4_init }, - { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, - { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, - { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, -}; - -static struct mc13xxx_platform_data mx51_efika_mc13892_data = { - .flags = MC13XXX_USE_RTC, - .regulators = { - .num_regulators = ARRAY_SIZE(mx51_efika_regulators), - .regulators = mx51_efika_regulators, - }, -}; - -static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &mx51_efika_spi_flash_data, - .irq = -1, - }, - { - .modalias = "mc13892", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &mx51_efika_mc13892_data, - /* irq number is run-time assigned */ - }, -}; - -static int mx51_efika_spi_cs[] = { - EFIKAMX_SPI_CS0, - EFIKAMX_SPI_CS1, -}; - -static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { - .chipselect = mx51_efika_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), -}; - -void __init efika_board_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, - ARRAY_SIZE(mx51efika_pads)); - imx51_add_imx_uart(0, &uart_pdata); - mx51_efika_usb(); - - /* FIXME: comes from original code. check this. */ - if (mx51_revision() < IMX_CHIP_REVISION_2_0) - sw2_init.constraints.state_mem.uV = 1100000; - else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { - sw2_init.constraints.state_mem.uV = 1250000; - sw1_init.constraints.state_mem.uV = 1000000; - } - if (machine_is_mx51_efikasb()) - vgen1_init.constraints.max_uV = 1200000; - - gpio_request(EFIKAMX_PMIC, "pmic irq"); - gpio_direction_input(EFIKAMX_PMIC); - mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC); - spi_register_board_info(mx51_efika_spi_board_info, - ARRAY_SIZE(mx51_efika_spi_board_info)); - imx51_add_ecspi(0, &mx51_efika_spi_pdata); - - imx51_add_pata_imx(); - -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif -} -- cgit v1.2.3-58-ga151 From 5dd18b0150e6f4eb3a9d06a2621cad8c73a3eccf Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Tue, 7 Aug 2012 12:48:21 +0530 Subject: arm/dts: omap5: Add mmc controller nodes and board data Add OMAP MMC related device tree data for OMAP5. Signed-off-by: Balaji T K Acked-by: Arnd Bergmann Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-evm.dts | 31 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap5.dtsi | 31 +++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 200c39ad1c82..7bb0c9dc5257 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -17,4 +17,35 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 57e527083746..881d60cb12ae 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -180,5 +180,36 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; }; }; -- cgit v1.2.3-58-ga151 From 53d91034cf29936cabf9a4d59270dc94ed7e6c1d Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 15 Aug 2012 16:53:25 +0530 Subject: arm/dts: AM33XX: Set the default status of module to "disabled" state Ideally in common SoC dtsi file should set all modules to "disabled" state and it should get enabled in respective EVM/Board dts file as per usage. This patch sets default status of all modules to "disabled" state in am33xx.dtsi file. Currently there are no modules supported as part of Bone and EVM dts support, so care to add entry "status = "okay"" while adding support for any module. Signed-off-by: Vaibhav Hiremath Acked-by: Arnd Bergmann Cc: Benoit Cousson Cc: Grant Likely Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone.dts | 6 ++++++ arch/arm/boot/dts/am335x-evm.dts | 6 ++++++ arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++ 3 files changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a9af4db7234c..a7906cb7989f 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -17,4 +17,10 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44E09000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6a97d9eff72..5dd8a6b9f194 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -17,4 +17,10 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44E09000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5..5f6c8e33060f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -102,36 +102,42 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + status = "disabled"; }; uart4: serial@481A6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + status = "disabled"; }; uart5: serial@481A8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + status = "disabled"; }; uart6: serial@481AA000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + status = "disabled"; }; i2c1: i2c@44E0B000 { @@ -139,6 +145,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + status = "disabled"; }; i2c2: i2c@4802A000 { @@ -146,6 +153,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + status = "disabled"; }; i2c3: i2c@4819C000 { @@ -153,6 +161,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + status = "disabled"; }; }; }; -- cgit v1.2.3-58-ga151 From 85d7ff9b907685b6469058888f1d961b3e8d47ad Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 23 Aug 2012 09:51:29 -0700 Subject: ARM: omap: add dtb targets Makes it easier to just do 'make dtbs' for whatever the kernel was configured for, just like some other platforms. Signed-off-by: Olof Johansson Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Makefile.boot | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index b03e562acc60..6cf1c2d336da 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -1,3 +1,9 @@ zreladdr-y += 0x80008000 params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 + +dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb +dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb -- cgit v1.2.3-58-ga151 From 5c697ea2eec2bf4146e57f964e1163333659cbf8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 23 Aug 2012 10:42:29 +0200 Subject: ARM: dts: mxs: Add alternative I2C muxing options for imx28 Signed-off-by: Maxime Ripard Cc: Brian Lilly Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e2240da7ba95..fac0f69a16ec 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -410,6 +410,17 @@ fsl,pull-up = <1>; }; + i2c0_pins_b: i2c0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ + 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < -- cgit v1.2.3-58-ga151 From 2f44211f938397be1a9a06945e8c6e07a7232333 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 23 Aug 2012 10:42:30 +0200 Subject: ARM: dts: mxs: Add pwm4 muxing options for imx28 Signed-off-by: Maxime Ripard Cc: Brian Lilly Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fac0f69a16ec..ece801c727f9 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -464,6 +464,16 @@ fsl,pull-up = <0>; }; + pwm4_pins_a: pwm4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < -- cgit v1.2.3-58-ga151 From 7f1222130c1ba4171eac1e4794c8c41631aad915 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 25 Aug 2012 01:51:37 +0200 Subject: ARM: mx28: Add SPI 2 pinmux into imx28.dtsi Add this SSP port 2 pin multiplexing configuration into the imx28.dtsi file. Signed-off-by: Marek Vasut Cc: Chris Ball Cc: Fabio Estevam Cc: Mark Brown Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index ece801c727f9..fa5253a1f16d 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -528,6 +528,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ + 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ + 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ + 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl@8001c000 { -- cgit v1.2.3-58-ga151 From bb2f1261c2ededd168d774e84e456bdad25ffdbf Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 25 Aug 2012 01:51:38 +0200 Subject: ARM: mx28: Add USB PHY overcurrent pinmux Add the pinmux settings for USB PHY overcurrent pins. Signed-off-by: Marek Vasut Cc: Chris Ball Cc: Fabio Estevam Cc: Mark Brown Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index fa5253a1f16d..5f9dbea7e6a5 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -541,6 +541,36 @@ fsl,voltage = <1>; fsl,pull-up = <1>; }; + + usbphy0_pins_a: usbphy0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy0_pins_b: usbphy0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy1_pins_a: usbphy1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { -- cgit v1.2.3-58-ga151 From 91ed4938ced262e3356a377b08e1f367da941a85 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 26 Aug 2012 14:59:31 +0200 Subject: ARM: mxs: Update DENX M28 machine and dts file Update the mach-mxs machine by removing the enet_clkout(). The new revision of the board doesn't need that. Also, update the DTS file with all the new drivers pulled in the mainline recently, that is, SPI, LRADC, USB. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-m28evk.dts | 79 +++++++++++++++++++++++++++++++++++--- arch/arm/mach-mxs/mach-mxs.c | 1 - 2 files changed, 73 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index ac3eff96a70c..8118b64362b6 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -23,6 +23,8 @@ apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; @@ -62,9 +64,27 @@ &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio3 10 1>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; @@ -72,8 +92,11 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ + 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -129,6 +152,7 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { @@ -151,32 +175,51 @@ }; }; + lradc@80050000 { + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + usbphy0: usbphy@8007c000 { status = "okay"; }; - auart3: serial@80070000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; + pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_a>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio3 11 0>; status = "okay"; }; @@ -198,6 +241,30 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 13 0>; + }; }; sound { diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 3b0d9c64c235..5cbb6376c685 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -288,7 +288,6 @@ static void __init imx28_evk_post_init(void) static void __init m28evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_DENX); mxsfb_pdata.mode_list = m28evk_video_modes; -- cgit v1.2.3-58-ga151 From 5decb4b63ab25fa826e117f844d6428c5e442c6f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Aug 2012 13:23:27 -0300 Subject: ARM: mx28evk: Add SPI flash support mx28evk has a free slot (J89) which can be used to populate an SPI NOR Flash. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-evk.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ab78ee53fdc7..8a9a2f4023ce 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -46,6 +46,23 @@ wp-gpios = <&gpio0 28 0>; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; -- cgit v1.2.3-58-ga151 From 8495a24386d3b1f0cfd17fd42e4c3ad80d88edbb Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Aug 2012 13:23:28 -0300 Subject: ARM: mx28evk: Add LRADC support Add LRADC support. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-evk.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 8a9a2f4023ce..ed92d61b8915 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -145,6 +145,10 @@ status = "okay"; }; + lradc@80050000 { + status = "okay"; + }; + i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; -- cgit v1.2.3-58-ga151 From c88a79a7789b2909ad1cf69ea2c9142030bbd6f4 Mon Sep 17 00:00:00 2001 From: Tetsuyuki Kobayashi Date: Mon, 23 Jul 2012 19:57:16 +0900 Subject: ARM: mach-shmobile: Add compilation support for dtbs using 'make dtbs' Add compilation support for dtbs using 'make dtbs' Cc: Nobuhiro Iwamatsu Cc: Kuninori Morimoto Cc: Simon Horman Signed-off-by: Tetsuyuki Kobayashi Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/Makefile.boot | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 498efd99338d..5e410192ffb8 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,3 +7,7 @@ __ZRELADDR := $(shell /bin/bash -c 'printf "0x%08x" \ # #params_phys-y (Instead: Pass atags pointer in r2) #initrd_phys-y (Instead: Use compiled-in initramfs) + +dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb +dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb +dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb -- cgit v1.2.3-58-ga151 From 624411ceba816b38e9e4a013c7e4c5f36a9f4cfe Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 30 Jul 2012 18:42:20 +0530 Subject: arm/dts: Cleanup regulator naming and remove @0,1 regulators do not have a 'reg' property, hence the regulator@0, regulator@1 do not make sense. get rid of it. Reported-by: David Brown Signed-off-by: Rajendra Nayak Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap4-sdp.dts | 4 ++-- arch/arm/boot/dts/twl4030.dtsi | 6 +++--- arch/arm/boot/dts/twl6030.dtsi | 26 +++++++++++++------------- 4 files changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index cdcb98c7e075..e60cba0ed6f1 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -27,7 +27,7 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator@10 { + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 72216e932fc0..dbcdc4a79491 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -18,7 +18,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator@0 { + vdd_eth: fixedregulator-vdd-eth { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -28,7 +28,7 @@ regulator-boot-on; }; - vbat: fixedregulator@2 { + vbat: fixedregulator-vbat { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 22f4d1394ed3..ff000172c93c 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,19 +19,19 @@ interrupts = <11>; }; - vdac: regulator@0 { + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vpll2: regulator@1 { + vpll2: regulator-vpll2 { compatible = "ti,twl4030-vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vmmc1: regulator@2 { + vmmc1: regulator-vmmc1 { compatible = "ti,twl4030-vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index d351b27d7213..123e2c40218a 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -20,70 +20,70 @@ interrupts = <11>; }; - vaux1: regulator@0 { + vaux1: regulator-vaux1 { compatible = "ti,twl6030-vaux1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vaux2: regulator@1 { + vaux2: regulator-vaux2 { compatible = "ti,twl6030-vaux2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2800000>; }; - vaux3: regulator@2 { + vaux3: regulator-vaux3 { compatible = "ti,twl6030-vaux3"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vmmc: regulator@3 { + vmmc: regulator-vmmc { compatible = "ti,twl6030-vmmc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; }; - vpp: regulator@4 { + vpp: regulator-vpp { compatible = "ti,twl6030-vpp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; }; - vusim: regulator@5 { + vusim: regulator-vusim { compatible = "ti,twl6030-vusim"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2900000>; }; - vdac: regulator@6 { + vdac: regulator-vdac { compatible = "ti,twl6030-vdac"; }; - vana: regulator@7 { + vana: regulator-vana { compatible = "ti,twl6030-vana"; }; - vcxio: regulator@8 { + vcxio: regulator-vcxio { compatible = "ti,twl6030-vcxio"; regulator-always-on; }; - vusb: regulator@9 { + vusb: regulator-vusb { compatible = "ti,twl6030-vusb"; }; - v1v8: regulator@10 { + v1v8: regulator-v1v8 { compatible = "ti,twl6030-v1v8"; regulator-always-on; }; - v2v1: regulator@11 { + v2v1: regulator-v2v1 { compatible = "ti,twl6030-v2v1"; regulator-always-on; }; - clk32kg: regulator@12 { + clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; }; -- cgit v1.2.3-58-ga151 From d5d08e2e1672da627d7c9d34a9dc1089c653e23a Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 21 Aug 2012 16:47:27 +0530 Subject: arm/dts: regulator: Add tps65910 device tree data Add device tree data for tps65910 regulator by adding all tps65910 regulator nodes. Regulator is initialized based on compatiable name provided in tps65910 DT file. All tps65910 PMIC regulator device tree nodes are placed in a seperate device tree include file (tps65910.dtsi). This patch was tested on AM335x-EVM. Signed-off-by: AnilKumar Ch Reviewed-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/tps65910.dtsi | 86 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 arch/arm/boot/dts/tps65910.dtsi diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi new file mode 100644 index 000000000000..92693a89160e --- /dev/null +++ b/arch/arm/boot/dts/tps65910.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 54a37bae248d5b9e1d1057c4f8b4f8af8d6e5456 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 21 Aug 2012 16:47:28 +0530 Subject: arm/dts: regulator: Add tps65217 device tree data Add device tree data for tps65217 regulator by adding all tps65217 regulator nodes. Regulator is initialized based on compatiable name provided in tps65217 DT file. All tps65910 PMIC regulator device tree nodes are placed in a seperate device tree include file (tps65217.dtsi). This patch was tested on AM335x-Bone. Signed-off-by: AnilKumar Ch Reviewed-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/tps65217.dtsi | 56 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 arch/arm/boot/dts/tps65217.dtsi diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 1b2a9702b0f5f377ceacdbd3b2cfdf863ef53bbc Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 21 Aug 2012 16:47:29 +0530 Subject: arm/dts: Add tps65910 regulator DT data to am335x-evm.dts Add tps65910 regulator device tree data to AM335x-EVM by adding regulator consumers with tightened constraints and regulator-name. TPS65910 regulator handle can be obtained by using this regulator name. This patch also add I2C node with I2C frequency and tps65910 PMIC I2C slave address. Signed-off-by: AnilKumar Ch Reviewed-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-evm.dts | 94 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 5dd8a6b9f194..9fcbacdb8f38 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -22,5 +22,99 @@ uart1: serial@44E09000 { status = "okay"; }; + + i2c1: i2c@44E0B000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2D { + reg = <0x2D>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; }; }; -- cgit v1.2.3-58-ga151 From a06ceff6f29e34edff5d6b082885c1c4139a0362 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Tue, 21 Aug 2012 16:47:30 +0530 Subject: arm/dts: Add tps65217 regulator DT data to am335x-bone.dts Add tps65217 regulator device tree data to AM335x-Bone by adding regulator consumers with tightened constraints and regulator-name. TPS65217 regulator handle can be obtained by using this regulator name. This patch also add I2C node with I2C frequency and tps65217 PMIC I2C slave address. Signed-off-by: AnilKumar Ch Reviewed-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone.dts | 54 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a7906cb7989f..917e7843bee7 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -22,5 +22,59 @@ uart1: serial@44E09000 { status = "okay"; }; + + i2c1: i2c@44E0B000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; }; }; -- cgit v1.2.3-58-ga151 From de7e934f2bd27e2636946600e4335c929fae3c87 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 31 Aug 2012 16:00:40 +0200 Subject: ARM: dts: mxs: Add I2C1 muxing options for imx28 Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 5f9dbea7e6a5..a9bda8e2ecca 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -421,6 +421,17 @@ fsl,pull-up = <1>; }; + i2c1_pins_a: i2c1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ + 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < -- cgit v1.2.3-58-ga151 From db84c038d6d7ff5ad1f18e2613b4d67583a7e40f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 31 Aug 2012 16:00:41 +0200 Subject: ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-cfa10049.dts | 31 +++++++++++++++++++++++++++++++ arch/arm/mach-mxs/Makefile.boot | 1 + 2 files changed, 32 insertions(+) create mode 100644 arch/arm/boot/dts/imx28-cfa10049.dts diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts new file mode 100644 index 000000000000..e0e4b8cad628 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -0,0 +1,31 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10049 Board"; + compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbx@80040000 { + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot index 4582999cf080..8bd23a8558db 100644 --- a/arch/arm/mach-mxs/Makefile.boot +++ b/arch/arm/mach-mxs/Makefile.boot @@ -5,6 +5,7 @@ dtb-y += imx23-evk.dtb \ imx23-stmp378x_devb.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ + imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-tx28.dtb \ -- cgit v1.2.3-58-ga151 From 186e3d943a2e8cd42b2c87cba7413168e8159d3e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 3 Sep 2012 16:15:25 +0200 Subject: ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-cfa10049.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index e0e4b8cad628..557befe1830d 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -26,6 +26,31 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; }; }; }; -- cgit v1.2.3-58-ga151 From fa876ceff9a78e05fb4df2b8639caa2bea24b878 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 Aug 2012 16:39:59 -0300 Subject: ARM: mx28evk: Add I2C EEPROM support mx28evk has a free slot U50 that can be used to populate an I2C EEPROM. Add support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-evk.dts | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ed92d61b8915..a0ad71ca3a44 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -161,6 +161,12 @@ VDDIO-supply = <®_3p3v>; }; + + at24@51 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x51>; + }; }; pwm: pwm@80064000 { -- cgit v1.2.3-58-ga151 From 41bf5706f46a19a35c5b38dd1202f8e69eb2ffbf Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 4 Sep 2012 10:44:02 +0200 Subject: ARM: dts: mxs: Add missing address and size cells in SSP nodes Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a9bda8e2ecca..96fe74e4935c 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -86,6 +86,8 @@ }; ssp0: ssp@80010000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80010000 0x2000>; interrupts = <96 82>; fsl,ssp-dma-channel = <0>; @@ -93,6 +95,8 @@ }; ssp1: ssp@80012000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80012000 0x2000>; interrupts = <97 83>; fsl,ssp-dma-channel = <1>; @@ -100,6 +104,8 @@ }; ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80014000 0x2000>; interrupts = <98 84>; fsl,ssp-dma-channel = <2>; @@ -107,6 +113,8 @@ }; ssp3: ssp@80016000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80016000 0x2000>; interrupts = <99 85>; fsl,ssp-dma-channel = <3>; -- cgit v1.2.3-58-ga151 From 223d1f9213d0c5473da905ab5984c5751a8d3d6f Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 4 Sep 2012 10:44:03 +0200 Subject: ARM: dts: cfa10049: Add SSP3 to the 10049 board Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-cfa10049.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 557befe1830d..1f7fa50414b6 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -20,6 +20,28 @@ compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28"; apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ + 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + ssp3: ssp@80016000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_cfa10049>; + status = "okay"; + }; + }; + apbx@80040000 { i2c1: i2c@8005a000 { pinctrl-names = "default"; -- cgit v1.2.3-58-ga151 From acd3b69f303173b88413ba5daf5b920cd3700a48 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 5 Sep 2012 04:56:56 +0200 Subject: ARM: dts: m28evk: Fix MMC WP pin being inverted The MMC WP is active high on the m28evk, fix this. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 8118b64362b6..3bab6b00c52d 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -63,7 +63,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; - wp-gpios = <&gpio3 10 1>; + wp-gpios = <&gpio3 10 0>; vmmc-supply = <®_vddio_sd0>; status = "okay"; }; -- cgit v1.2.3-58-ga151 From 500b6ae3c1edbc8fc7a3ba551f9e09acffaa4304 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 23 Aug 2012 10:47:52 +0800 Subject: ARM: PRIMA2: add missing interrupts property for pinctrl node commit 5130216265f6f924a4 missed the interrupts property Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/prima2-cb.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index 34ae3a64ba25..4245306d60e1 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -284,6 +284,7 @@ #interrupt-cells = <2>; compatible = "sirf,prima2-gpio-pinmux"; reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; gpio-controller; interrupt-controller; }; -- cgit v1.2.3-58-ga151 From 434e1c574cc304eaff630f4e92ed239f7886815f Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 23 Aug 2012 10:47:53 +0800 Subject: ARM: PRIMA2: rename prima2-cb.dts to prima2.dtsi as it only has SoC features The current prima2-cb.dts only includes prima2 SoC feature without board- specific descriptions. This patches rename it to dtsi and clean some useless content. Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/prima2-cb.dts | 425 ---------------------------------------- arch/arm/boot/dts/prima2.dtsi | 423 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 423 insertions(+), 425 deletions(-) delete mode 100644 arch/arm/boot/dts/prima2-cb.dts create mode 100644 arch/arm/boot/dts/prima2.dtsi diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts deleted file mode 100644 index 4245306d60e1..000000000000 --- a/arch/arm/boot/dts/prima2-cb.dts +++ /dev/null @@ -1,425 +0,0 @@ -/dts-v1/; -/ { - model = "SiRF Prima2 eVB"; - compatible = "sirf,prima2-cb", "sirf,prima2"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1"; - linux,stdout-path = &uart1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - /* from bootloader */ - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0x80000000>; - - l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; - reg = <0x80040000 0x1000>; - interrupts = <59>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0 0x40000000>; - }; - - intc: interrupt-controller@80020000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "sirf,prima2-intc"; - reg = <0x80020000 0x1000>; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x88000000 0x88000000 0x40000>; - - clock-controller@88000000 { - compatible = "sirf,prima2-clkc"; - reg = <0x88000000 0x1000>; - interrupts = <3>; - }; - - reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - }; - - rsc-controller@88020000 { - compatible = "sirf,prima2-rsc"; - reg = <0x88020000 0x1000>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90000000 0x90000000 0x10000>; - - memory-controller@90000000 { - compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x10000>; - interrupts = <27>; - }; - }; - - disp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90010000 0x90010000 0x30000>; - - display@90010000 { - compatible = "sirf,prima2-lcd"; - reg = <0x90010000 0x20000>; - interrupts = <30>; - }; - - vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x98000000 0x98000000 0x8000000>; - - graphics@98000000 { - compatible = "powervr,sgx531"; - reg = <0x98000000 0x8000000>; - interrupts = <6>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa0000000 0xa0000000 0x8000000>; - - multimedia@a0000000 { - compatible = "sirf,prima2-video-codec"; - reg = <0xa0000000 0x8000000>; - interrupts = <5>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa8000000 0xa8000000 0x2000000>; - - dspif@a8000000 { - compatible = "sirf,prima2-dspif"; - reg = <0xa8000000 0x10000>; - interrupts = <9>; - }; - - gps@a8010000 { - compatible = "sirf,prima2-gps"; - reg = <0xa8010000 0x10000>; - interrupts = <7>; - }; - - dsp@a9000000 { - compatible = "sirf,prima2-dsp"; - reg = <0xa9000000 0x1000000>; - interrupts = <8>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; - - timer@b0020000 { - compatible = "sirf,prima2-tick"; - reg = <0xb0020000 0x1000>; - interrupts = <0>; - }; - - nand@b0030000 { - compatible = "sirf,prima2-nand"; - reg = <0xb0030000 0x10000>; - interrupts = <41>; - }; - - audio@b0040000 { - compatible = "sirf,prima2-audio"; - reg = <0xb0040000 0x10000>; - interrupts = <35>; - }; - - uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; - interrupts = <17>; - }; - - uart1: uart@b0060000 { - cell-index = <1>; - compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; - interrupts = <18>; - }; - - uart2: uart@b0070000 { - cell-index = <2>; - compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; - interrupts = <19>; - }; - - usp0: usp@b0080000 { - cell-index = <0>; - compatible = "sirf,prima2-usp"; - reg = <0xb0080000 0x10000>; - interrupts = <20>; - }; - - usp1: usp@b0090000 { - cell-index = <1>; - compatible = "sirf,prima2-usp"; - reg = <0xb0090000 0x10000>; - interrupts = <21>; - }; - - usp2: usp@b00a0000 { - cell-index = <2>; - compatible = "sirf,prima2-usp"; - reg = <0xb00a0000 0x10000>; - interrupts = <22>; - }; - - dmac0: dma-controller@b00b0000 { - cell-index = <0>; - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - }; - - dmac1: dma-controller@b0160000 { - cell-index = <1>; - compatible = "sirf,prima2-dmac"; - reg = <0xb0160000 0x10000>; - interrupts = <13>; - }; - - vip@b00C0000 { - compatible = "sirf,prima2-vip"; - reg = <0xb00C0000 0x10000>; - }; - - spi0: spi@b00d0000 { - cell-index = <0>; - compatible = "sirf,prima2-spi"; - reg = <0xb00d0000 0x10000>; - interrupts = <15>; - }; - - spi1: spi@b0170000 { - cell-index = <1>; - compatible = "sirf,prima2-spi"; - reg = <0xb0170000 0x10000>; - interrupts = <16>; - }; - - i2c0: i2c@b00e0000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00e0000 0x10000>; - interrupts = <24>; - }; - - i2c1: i2c@b00f0000 { - cell-index = <1>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00f0000 0x10000>; - interrupts = <25>; - }; - - tsc@b0110000 { - compatible = "sirf,prima2-tsc"; - reg = <0xb0110000 0x10000>; - interrupts = <33>; - }; - - gpio: gpio-controller@b0120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio-pinmux"; - reg = <0xb0120000 0x10000>; - interrupts = <43 44 45 46 47>; - gpio-controller; - interrupt-controller; - }; - - pwm@b0130000 { - compatible = "sirf,prima2-pwm"; - reg = <0xb0130000 0x10000>; - }; - - efusesys@b0140000 { - compatible = "sirf,prima2-efuse"; - reg = <0xb0140000 0x10000>; - }; - - pulsec@b0150000 { - compatible = "sirf,prima2-pulsec"; - reg = <0xb0150000 0x10000>; - interrupts = <48>; - }; - - pci-iobg { - compatible = "sirf,prima2-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x56000000 0x56000000 0x1b00000>; - - sd0: sdhci@56000000 { - cell-index = <0>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56000000 0x100000>; - interrupts = <38>; - }; - - sd1: sdhci@56100000 { - cell-index = <1>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56100000 0x100000>; - interrupts = <38>; - }; - - sd2: sdhci@56200000 { - cell-index = <2>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56200000 0x100000>; - interrupts = <23>; - }; - - sd3: sdhci@56300000 { - cell-index = <3>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56300000 0x100000>; - interrupts = <23>; - }; - - sd4: sdhci@56400000 { - cell-index = <4>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56400000 0x100000>; - interrupts = <39>; - }; - - sd5: sdhci@56500000 { - cell-index = <5>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56500000 0x100000>; - interrupts = <39>; - }; - - pci-copy@57900000 { - compatible = "sirf,prima2-pcicp"; - reg = <0x57900000 0x100000>; - interrupts = <40>; - }; - - rom-interface@57a00000 { - compatible = "sirf,prima2-romif"; - reg = <0x57a00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80030000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,prima2-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <55 56 57>; - }; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <52 53 54>; - }; - - pwrc@3000 { - compatible = "sirf,prima2-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <32>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb8000000 0xb8000000 0x40000>; - - usb0: usb@b00e0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8000000 0x10000>; - interrupts = <10>; - }; - - usb1: usb@b00f0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8010000 0x10000>; - interrupts = <11>; - }; - - sata@b00f0000 { - compatible = "synopsys,dwc-ahsata"; - reg = <0xb8020000 0x10000>; - interrupts = <37>; - }; - - security@b00f0000 { - compatible = "sirf,prima2-security"; - reg = <0xb8030000 0x10000>; - interrupts = <42>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi new file mode 100644 index 000000000000..1b716aae64f7 --- /dev/null +++ b/arch/arm/boot/dts/prima2.dtsi @@ -0,0 +1,423 @@ +/* + * DTS file for CSR SiRFprimaII SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,prima2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + l2-cache-controller@80040000 { + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + reg = <0x80040000 0x1000>; + interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; + }; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clock-controller@88000000 { + compatible = "sirf,prima2-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + display@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx531"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + multimedia@a0000000 { + compatible = "sirf,prima2-video-codec"; + reg = <0xa0000000 0x8000000>; + interrupts = <5>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x10000>; + interrupts = <17>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x10000>; + interrupts = <18>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x10000>; + interrupts = <19>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + }; + + usp2: usp@b00a0000 { + cell-index = <2>; + compatible = "sirf,prima2-usp"; + reg = <0xb00a0000 0x10000>; + interrupts = <22>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + }; + + gpio: gpio-controller@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,prima2-gpio-pinmux"; + reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; + gpio-controller; + interrupt-controller; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + }; + + sd4: sdhci@56400000 { + cell-index = <4>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56400000 0x100000>; + interrupts = <39>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + }; + + sata@b00f0000 { + compatible = "synopsys,dwc-ahsata"; + reg = <0xb8020000 0x10000>; + interrupts = <37>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + }; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 056876f6c73406c06d530d16d020177f5ec4a0bd Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 23 Aug 2012 10:47:54 +0800 Subject: pinctrl: sirf: add DT-binding pinmux mapping support This makes us possible to define pinmux mapping in board-specific DTS. prima2.dtsi provides all possible (groups,functions) configuration, and device in .dts select configurations from dtsi files. Signed-off-by: Barry Song Acked-by: Linus Walleij --- arch/arm/boot/dts/prima2-evb.dts | 37 +++++++ arch/arm/boot/dts/prima2.dtsi | 221 ++++++++++++++++++++++++++++++++++++- arch/arm/mach-prima2/Makefile.boot | 2 + drivers/pinctrl/pinctrl-sirf.c | 58 +++++++++- 4 files changed, 315 insertions(+), 3 deletions(-) create mode 100644 arch/arm/boot/dts/prima2-evb.dts diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts new file mode 100644 index 000000000000..57286b4e7b87 --- /dev/null +++ b/arch/arm/boot/dts/prima2-evb.dts @@ -0,0 +1,37 @@ +/* + * DTS file for CSR SiRFprimaII Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "prima2.dtsi" + +/ { + model = "CSR SiRFprimaII Evaluation Board"; + compatible = "sirf,prima2", "sirf,prima2-cb"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + axi { + peri-iobg { + uart@b0060000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + }; + spi@b00d0000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + }; + spi@b0170000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 1b716aae64f7..055fca542120 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -277,14 +277,231 @@ interrupts = <33>; }; - gpio: gpio-controller@b0120000 { + gpio: pinctrl@b0120000 { #gpio-cells = <2>; #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio-pinmux"; + compatible = "sirf,prima2-pinctrl"; reg = <0xb0120000 0x10000>; interrupts = <43 44 45 46 47>; gpio-controller; interrupt-controller; + + lcd_16pins_a: lcd0@0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0@1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0@2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0@0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0@0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1@0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0@0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1@0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0@0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1@0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0@0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1@0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2@0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3@0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + gps_pins_a: gps@0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip@0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0@0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1@0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2@0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc3_pins_a: sdmmc3@0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc4_pins_a: sdmmc4@0 { + sdmmc4 { + sirf,pins = "sdmmc4grp"; + sirf,function = "sdmmc4"; + }; + }; + sdmmc5_pins_a: sdmmc5@0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s@0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + ac97_pins_a: ac97@0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand@0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0@0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1@0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usp2_pins_a: usp2@0 { + usp2 { + sirf,pins = "usp2grp"; + sirf,function = "usp2"; + }; + }; + usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 { + usb0_utmi_drvbus { + sirf,pins = "usb0_utmi_drvbusgrp"; + sirf,function = "usb0_utmi_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst@0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count@0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst@0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst@0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; }; pwm@b0130000 { diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot index c77a4883a4ee..98167da874c9 100644 --- a/arch/arm/mach-prima2/Makefile.boot +++ b/arch/arm/mach-prima2/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 7fca6ce5952b..304360cd213e 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -916,11 +917,66 @@ static void sirfsoc_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s seq_printf(s, " " DRIVER_NAME); } +static int sirfsoc_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + struct sirfsoc_pmx *spmx = pinctrl_dev_get_drvdata(pctldev); + struct device_node *np; + struct property *prop; + const char *function, *group; + int ret, index = 0, count = 0; + + /* calculate number of maps required */ + for_each_child_of_node(np_config, np) { + ret = of_property_read_string(np, "sirf,function", &function); + if (ret < 0) + return ret; + + ret = of_property_count_strings(np, "sirf,pins"); + if (ret < 0) + return ret; + + count += ret; + } + + if (!count) { + dev_err(spmx->dev, "No child nodes passed via DT\n"); + return -ENODEV; + } + + *map = kzalloc(sizeof(**map) * count, GFP_KERNEL); + if (!*map) + return -ENOMEM; + + for_each_child_of_node(np_config, np) { + of_property_read_string(np, "sirf,function", &function); + of_property_for_each_string(np, "sirf,pins", prop, group) { + (*map)[index].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[index].data.mux.group = group; + (*map)[index].data.mux.function = function; + index++; + } + } + + *num_maps = count; + + return 0; +} + +static void sirfsoc_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + kfree(map); +} + static struct pinctrl_ops sirfsoc_pctrl_ops = { .get_groups_count = sirfsoc_get_groups_count, .get_group_name = sirfsoc_get_group_name, .get_group_pins = sirfsoc_get_group_pins, .pin_dbg_show = sirfsoc_pin_dbg_show, + .dt_node_to_map = sirfsoc_dt_node_to_map, + .dt_free_map = sirfsoc_dt_free_map, }; struct sirfsoc_pmx_func { @@ -1221,7 +1277,7 @@ out_no_gpio_remap: } static const struct of_device_id pinmux_ids[] __devinitconst = { - { .compatible = "sirf,prima2-gpio-pinmux" }, + { .compatible = "sirf,prima2-pinctrl" }, {} }; -- cgit v1.2.3-58-ga151 From 067c182fb5b0db856b532427956b0ecd7a87c170 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 6 Sep 2012 11:40:42 +0200 Subject: ARM: LPC32xx: Adjust device tree node to new standard num-cs In spi-pl022.c, the new device tree binding is now "num-cs" for the number of chip selects. Further, pl022,hierarchy and pl022,slave-tx-disable isn't supported in favour of reasonable defaults in the driver. Adjusting phy3250.dts to it. Signed-off-by: Roland Stigge --- arch/arm/boot/dts/phy3250.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 802ec5b2fd00..a7ad85e4b8f9 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -135,13 +135,11 @@ ssp0: ssp@20084000 { #address-cells = <1>; #size-cells = <0>; - pl022,num-chipselects = <1>; + num-cs = <1>; cs-gpios = <&gpio 3 5 0>; eeprom: at25@0 { - pl022,hierarchy = <0>; pl022,interface = <0>; - pl022,slave-tx-disable = <0>; pl022,com-mode = <0>; pl022,rx-level-trig = <1>; pl022,tx-level-trig = <1>; -- cgit v1.2.3-58-ga151 From 25b3ab6c7e39e42245d98c27d25d9902baec7b65 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Thu, 6 Sep 2012 11:40:48 +0200 Subject: ARM: LPC32xx: Extend dts for EA3250 board This patch adds keys and leds to the EA3250 board's dts device tree file. Signed-off-by: Roland Stigge --- arch/arm/boot/dts/ea3250.dts | 109 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 108 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts index d79b28d9c963..a4ba31b23c88 100644 --- a/arch/arm/boot/dts/ea3250.dts +++ b/arch/arm/boot/dts/ea3250.dts @@ -166,9 +166,116 @@ #size-cells = <0>; autorepeat; button@21 { - label = "GPIO Key UP"; + label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { + label = "KEY1"; + linux,code = <1>; + gpios = <&pca9532 0 0>; + }; + key2 { + label = "KEY2"; + linux,code = <2>; + gpios = <&pca9532 1 0>; + }; + key3 { + label = "KEY3"; + linux,code = <3>; + gpios = <&pca9532 2 0>; + }; + key4 { + label = "KEY4"; + linux,code = <4>; + gpios = <&pca9532 3 0>; + }; + joy0 { + label = "Joystick Key 0"; + linux,code = <10>; + gpios = <&gpio 2 0 0>; /* P2.0 */ + }; + joy1 { + label = "Joystick Key 1"; + linux,code = <11>; + gpios = <&gpio 2 1 0>; /* P2.1 */ + }; + joy2 { + label = "Joystick Key 2"; + linux,code = <12>; + gpios = <&gpio 2 2 0>; /* P2.2 */ + }; + joy3 { + label = "Joystick Key 3"; + linux,code = <13>; + gpios = <&gpio 2 3 0>; /* P2.3 */ + }; + joy4 { + label = "Joystick Key 4"; + linux,code = <14>; + gpios = <&gpio 2 4 0>; /* P2.4 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + /* LEDs on OEM Board */ + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + + led2 { + gpios = <&gpio 2 10 1>; /* P2.10, active low */ + default-state = "off"; + }; + + led3 { + gpios = <&gpio 2 11 1>; /* P2.11, active low */ + default-state = "off"; + }; + + led4 { + gpios = <&gpio 2 12 1>; /* P2.12, active low */ + default-state = "off"; + }; + + /* LEDs on Base Board */ + + lede1 { + gpios = <&pca9532 8 0>; + default-state = "off"; + }; + lede2 { + gpios = <&pca9532 9 0>; + default-state = "off"; + }; + lede3 { + gpios = <&pca9532 10 0>; + default-state = "off"; + }; + lede4 { + gpios = <&pca9532 11 0>; + default-state = "off"; + }; + lede5 { + gpios = <&pca9532 12 0>; + default-state = "off"; + }; + lede6 { + gpios = <&pca9532 13 0>; + default-state = "off"; + }; + lede7 { + gpios = <&pca9532 14 0>; + default-state = "off"; + }; + lede8 { + gpios = <&pca9532 15 0>; + default-state = "off"; + }; }; }; -- cgit v1.2.3-58-ga151 From 3956a1a0d1e072c321fcf1b1136e35a22be12af5 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 23 Aug 2012 16:54:09 +0300 Subject: ARM: OMAP: omap_device: Fix up resource names when booted with devicetree When booted with some resource will have their name set to NULL. This can cause later kernel crash since this is not expected by the platform code. When we boot without DT the devices are created with platform_device_add() which itself fixes up the missing resource names: if (r->name == NULL) r->name = dev_name(&pdev->dev); The of core also fixes up the resource names when taking the information from DT data - in __of_address_to_resource(): r->name = name ? name : dev->full_name; When we boot OMAP with devicetree: of will create the devices based on the DT data so the resource names are guarantied to be not NULL. Since we have the 'ti,hwmod' tag, we remove the of created resources from the device and re-create them based on hwmod data. If the hwmod data does not specify a name for a resource it will be NULL. This can cause kernel crash if the driver uses platform_get_resource_byname() to get any resource. Signed-off-by: Peter Ujfalusi [b-cousson@ti.com: Change omap_hwmod to omap_device in subject] Signed-off-by: Benoit Cousson --- arch/arm/plat-omap/omap_device.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index c490240bb82c..ff57b5aeba4e 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -370,6 +370,14 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } + /* Fix up missing resource names */ + for (i = 0; i < pdev->num_resources; i++) { + struct resource *r = &pdev->resource[i]; + + if (r->name == NULL) + r->name = dev_name(&pdev->dev); + } + if (of_get_property(node, "ti,no_idle_on_suspend", NULL)) omap_device_disable_idle_on_suspend(pdev); -- cgit v1.2.3-58-ga151 From 167e62798ccd4172d02c8f10ca7010a301498aa3 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 9 Aug 2012 16:30:37 +0530 Subject: ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra30-cardhu.dts | 134 +++++++++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts index c169bced131e..6f9daaead5f9 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -126,6 +126,120 @@ ti,vsel0-state-high; ti,vsel1-state-high; }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vdd1"; + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vdd2"; + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vddctrl"; + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vio"; + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; }; ahub { @@ -134,6 +248,11 @@ }; }; + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + sdhci@78000000 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ @@ -147,6 +266,21 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-cardhu", "nvidia,tegra-audio-wm8903"; -- cgit v1.2.3-58-ga151 From 640a7af58b4ac9ca2347a25410b364829bde1bb7 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 9 Aug 2012 16:30:38 +0530 Subject: ARM: dt: tegra: cardhu: split dts file for support multiple board versions There is multiple version of cardhu starting from A01 to A07. Cardhu A01 and A03 are not supported. Cardhu A02 will have different sets of GPIOs for fixed regulator compare to cardhu A04. The Cardhu A05, A06, A07 are compatibe with A04. Based on cardhu version, the related dts file need to be chosen like for cardhu A02, use tegra30-cardhu-a02.dts, cardhu A04 and more, use tegra30-cardhu-a04.dts. This patch create the DTS file A02 and A04 and convert tegra30-cardhu.dts as dts include file. Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 11 ++ arch/arm/boot/dts/tegra30-cardhu-a04.dts | 10 + arch/arm/boot/dts/tegra30-cardhu.dts | 305 ----------------------------- arch/arm/boot/dts/tegra30-cardhu.dtsi | 326 +++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 3 +- 5 files changed, 349 insertions(+), 306 deletions(-) create mode 100644 arch/arm/boot/dts/tegra30-cardhu-a02.dts create mode 100644 arch/arm/boot/dts/tegra30-cardhu-a04.dts delete mode 100644 arch/arm/boot/dts/tegra30-cardhu.dts create mode 100644 arch/arm/boot/dts/tegra30-cardhu.dtsi diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts new file mode 100644 index 000000000000..dd870b7f188b --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -0,0 +1,11 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A02 version of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; + compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; +}; + diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts new file mode 100644 index 000000000000..a4cae6c16ddf --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -0,0 +1,10 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A04 and later versions of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; + compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts deleted file mode 100644 index 6f9daaead5f9..000000000000 --- a/arch/arm/boot/dts/tegra30-cardhu.dts +++ /dev/null @@ -1,305 +0,0 @@ -/dts-v1/; - -/include/ "tegra30.dtsi" - -/ { - model = "NVIDIA Tegra30 Cardhu evaluation board"; - compatible = "nvidia,cardhu", "nvidia,tegra30"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - dap2_fs_pa2 { - nvidia,pins = "dap2_fs_pa2", - "dap2_sclk_pa3", - "dap2_din_pa4", - "dap2_dout_pa5"; - nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - serial@70006000 { - status = "okay"; - clock-frequency = <408000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - - /* ALS and Proximity sensor */ - isl29028@44 { - compatible = "isil,isl29028"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <88 0x04>; /*gpio PL0 */ - }; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - - wm8903: wm8903@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <179 0x04>; /* gpio PW3 */ - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; - }; - - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - - pmic: tps65911@2d { - compatible = "ti,tps65911"; - reg = <0x2d>; - - interrupts = <0 86 0x4>; - #interrupt-cells = <2>; - interrupt-controller; - - #gpio-cells = <2>; - gpio-controller; - - vcc1-supply = <&vdd_ac_bat_reg>; - vcc2-supply = <&vdd_ac_bat_reg>; - vcc3-supply = <&vio_reg>; - vcc5-supply = <&vdd_ac_bat_reg>; - vcc6-supply = <&vdd2_reg>; - vcc7-supply = <&vdd_ac_bat_reg>; - vccio-supply = <&vdd_ac_bat_reg>; - - regulators { - #address-cells = <1>; - #size-cells = <0>; - - vdd1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "vdd1"; - regulator-name = "vddio_ddr_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vdd2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "vdd2"; - regulator-name = "vdd_1v5_gen"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - vddctrl_reg: regulator@2 { - reg = <2>; - regulator-compatible = "vddctrl"; - regulator-name = "vdd_cpu,vdd_sys"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - vio_reg: regulator@3 { - reg = <3>; - regulator-compatible = "vio"; - regulator-name = "vdd_1v8_gen"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; - regulator-name = "vdd_pexa,vdd_pexb"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; - regulator-name = "vdd_sata,avdd_plle"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - /* LDO3 is not connected to anything */ - - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; - regulator-name = "vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; - regulator-name = "avdd_dsi_csi,pwrdet_mipi"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; - regulator-name = "vdd_pllm,x,u,a_p_c_s"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; - regulator-name = "vdd_ddr_hs"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - }; - }; - }; - - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - pmc { - status = "okay"; - nvidia,invert-interrupt; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_ac_bat_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_ac_bat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-cardhu", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Cardhu"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - }; -}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi new file mode 100644 index 000000000000..ba38527fcb7f --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -0,0 +1,326 @@ +/include/ "tegra30.dtsi" + +/** + * This file contains common DT entry for all fab version of Cardhu. + * There is multiple fab version of Cardhu starting from A01 to A07. + * Cardhu fab version A01 and A03 are not supported. Cardhu fab version + * A02 will have different sets of GPIOs for fixed regulator compare to + * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are + * compatible with fab version A04. Based on Cardhu fab version, the + * related dts file need to be chosen like for Cardhu fab version A02, + * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use + * tegra30-cardhu-a04.dts. + * The identification of board is done in two ways, by looking the sticker + * on PCB and by reading board id eeprom. + * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * number is the fab version like here it is 002 and hence fab version A02. + * The (downstream internal) U-Boot of Cardhu display the board-id as + * follows: + * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00 + * In this Fab version is 02 i.e. A02. + * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56). + * The location 0x8 of this eeprom contains the Fab version. It is 1 byte + * wide. + */ + +/ { + model = "NVIDIA Tegra30 Cardhu evaluation board"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <408000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <88 0x04>; /*gpio PL0 */ + }; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <179 0x04>; /* gpio PW3 */ + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vdd1"; + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vdd2"; + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vddctrl"; + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vio"; + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-cardhu", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Cardhu"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 7a1bb62ddcf0..6e3520725b06 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -8,4 +8,5 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb -dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a02.dtb +dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu-a04.dtb -- cgit v1.2.3-58-ga151 From fa4a925230835eab27c9c97a0a6d72caa4fe2b67 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Thu, 9 Aug 2012 16:30:39 +0530 Subject: ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 76 ++++++++++++++++ arch/arm/boot/dts/tegra30-cardhu-a04.dts | 88 ++++++++++++++++++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 147 +++++++++++++++++++++++++++++++ 3 files changed, 311 insertions(+) diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index dd870b7f188b..dd4222f00eca 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -7,5 +7,81 @@ / { model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 2 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 83 0>; /* GPIO PK3 */ + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index a4cae6c16ddf..0828f097ca86 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -7,4 +7,92 @@ / { model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + reg = <100>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 234 0>; /* GPIO PDD2 */ + }; + + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + reg = <106>; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 232 0>; /* GPIO PDD0 */ + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index ba38527fcb7f..47946939b49e 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -162,6 +162,7 @@ vcc1-supply = <&vdd_ac_bat_reg>; vcc2-supply = <&vdd_ac_bat_reg>; vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; vcc5-supply = <&vdd_ac_bat_reg>; vcc6-supply = <&vdd2_reg>; vcc7-supply = <&vdd_ac_bat_reg>; @@ -234,6 +235,15 @@ regulator-always-on; }; + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6_reg: regulator@9 { reg = <9>; regulator-compatible = "ldo6"; @@ -300,6 +310,143 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 220 0>; /* gpio PBB4 */ + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 25 0>; /* gpio PD1 */ + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6 */ + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 142 0>; /* gpio PR6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 143 0>; /* gpio PR7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 144 0>; /* gpio PS0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 24 0>; /* gpio PD0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 94 0>; /* gpio PL6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 92 0>; /* gpio PL4 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { -- cgit v1.2.3-58-ga151 From 6529e638057d6591fb64f43a64820cce283c3536 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 20 Jun 2012 15:58:34 -0600 Subject: ARM: dt: tegra: seaboard: add regulators Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-seaboard.dts | 184 +++++++++++++++++++++++++++++++++ 1 file changed, 184 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 85e621ab2968..92deb36ae03c 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -374,6 +374,152 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + temperature-sensor@4c { compatible = "nct1008"; reg = <0x4c>; @@ -387,6 +533,10 @@ }; }; + pmc { + nvidia,invert-interrupt; + }; + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; @@ -473,6 +623,40 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-seaboard", "nvidia,tegra-audio-wm8903"; -- cgit v1.2.3-58-ga151 From 017a01045e5a2e6d1bf4394d6b895662522c25f3 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 20 Jun 2012 16:53:41 -0600 Subject: ARM: dt: tegra: ventana: add regulators Ventana uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. The data was chosen to match the PMIC HW defaults, with the following exception: ldo6: The HW default is 2.85v. The schematics are unlabelled. Internal research indicates that 1.8v is correct. Our downstream kernel also uses 1.8v. Portions based on work by Laxman Dewangan Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-ventana.dts | 204 ++++++++++++++++++++++++++++++++++ 1 file changed, 204 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index be90544e6b59..4ec6b4cd9d52 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -289,6 +289,156 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -317,6 +467,60 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-ventana", "nvidia,tegra-audio-wm8903"; -- cgit v1.2.3-58-ga151 From 217b8f0f357798270d9be396931e41e28ea2d00c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 21 Jun 2012 14:24:57 -0600 Subject: ARM: dt: tegra: paz00: add regulators The Toshiba AC100/PAZ00 uses a TPS6586x regulator. Instantiate this. Three data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each rail in the signal names. * The AC100 kernel used by the Ubuntu port: repo git://gitorious.org/~marvin24/ac100/marvin24s-kernel.git branch chromeos-ac100-3.0 file arch/arm/mach-tegra/board-paz00-power.c For many rails, the constraints in that tree specified differing min and max voltages. In all cases, the min value was ignored, since there's no need currently to vary any of the voltages at run-time. DVFS might change this in the future. In most cases these sources all matched. Differences are: sm0: HW defaults and schematic match at 1.2v. marvin24's kernel had a max of 1.3v, but this higher voltage was only applied to HW by DVFS code, which isn't currently supported in mainline. sm1: HW defaults and schematic match at 1.0v. marvin24's kernel had a max of 1.125v, but this higher voltage was only applied to HW by DVFS code, which isn't currently supported in mainline. ldo3: The HW default is on. marvin24's kernel didn't specify always-on, but since the board wasn't marked as having fully constrained regulators, the rail was not turned off, so the difference had no effect. The rail is needed for USB. ldo6: The HW default is 2.85v. The schematics indicate 2.85v. However, since this regulator is used for the same purpose as on other boards that require 1.8v, this is set to 1.8v. Note that this regulator feeds the CRT VDAC on Tegra, and so in practice is unlikely to be used, even though it is actaully hooked up in HW. Portions based on work by Laxman Dewangan Signed-off-by: Stephen Warren Tested-by: Marc Dietrich # v2 Acked-by: Laxman Dewangan --- arch/arm/boot/dts/tegra20-paz00.dts | 173 ++++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 684a9e1ff7e9..ddf287f52d49 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -272,12 +272,170 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&p5valw_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "+1.2vs_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "+1.0vs_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "+3.7vs_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "+1.1vs_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "+1.2vs_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "+3.3vs_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "+2.85vs_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + /* + * Research indicates this should be + * 1.8v; other boards that use this + * rail for the same purpose need it + * set to 1.8v. The schematic signal + * name is incorrect; perhaps copied + * from an incorrect NVIDIA reference. + */ + regulator-name = "+2.85vs_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "+3.3vs_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "+3.3vs_rtc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; }; + pmc { + nvidia,invert-interrupt; + }; + usb@c5000000 { status = "okay"; }; @@ -325,6 +483,21 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + p5valw_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+5valw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-alc5632-paz00", "nvidia,tegra-audio-alc5632"; -- cgit v1.2.3-58-ga151 From e7765b3746dcbd7bc3477c14217fcf0747043b4f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 25 Jun 2012 16:41:25 -0600 Subject: ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-whistler.dts | 293 +++++++++++++++++++++++++++++++++ 1 file changed, 293 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 6916310bf58f..4ae1e5dcfa62 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -261,6 +261,284 @@ gpio-controller; #gpio-cells = <2>; }; + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + mbatt-supply = <&usb0_vbus_reg>; + in-v1-supply = <&mbatt_reg>; + in-v2-supply = <&mbatt_reg>; + in-v3-supply = <&mbatt_reg>; + in1-supply = <&mbatt_reg>; + in2-supply = <&nvvdd_sv3_reg>; + in3-supply = <&mbatt_reg>; + in4-supply = <&mbatt_reg>; + in5-supply = <&mbatt_reg>; + in6-supply = <&mbatt_reg>; + in7-supply = <&mbatt_reg>; + in8-supply = <&mbatt_reg>; + in9-supply = <&mbatt_reg>; + in10-supply = <&mbatt_reg>; + in11-supply = <&mbatt_reg>; + in12-supply = <&mbatt_reg>; + in13-supply = <&mbatt_reg>; + in14-supply = <&mbatt_reg>; + in15-supply = <&mbatt_reg>; + in16-supply = <&mbatt_reg>; + in17-supply = <&nvvdd_sv3_reg>; + in18-supply = <&nvvdd_sv3_reg>; + in19-supply = <&mbatt_reg>; + in20-supply = <&mbatt_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + mbatt_reg: regulator@0 { + reg = <0>; + regulator-compatible = "mbatt"; + regulator-name = "vbat_pmu"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sd1"; + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sd2"; + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + nvvdd_sv3_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sd3"; + regulator-name = "nvvdd_sv3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "nvvdd_ldo2,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo3"; + regulator-name = "nvvdd_ldo3,vcom_1v8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "nvvdd_ldo4,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "nvvdd_ldo7,avddio_audio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo9"; + regulator-name = "nvvdd_ldo9,avdd_cam*"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo10"; + regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo11"; + regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@15 { + reg = <15>; + regulator-compatible = "ldo12"; + regulator-name = "nvvdd_ldo12,vddio_sdio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@16 { + reg = <16>; + regulator-compatible = "ldo13"; + regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@17 { + reg = <17>; + regulator-compatible = "ldo14"; + regulator-name = "nvvdd_ldo14,avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@18 { + reg = <18>; + regulator-compatible = "ldo15"; + regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@19 { + reg = <19>; + regulator-compatible = "ldo16"; + regulator-name = "nvvdd_ldo16,vdd_dbrtr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + regulator@20 { + reg = <20>; + regulator-compatible = "ldo17"; + regulator-name = "nvvdd_ldo17,vddio_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@21 { + reg = <21>; + regulator-compatible = "ldo18"; + regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@22 { + reg = <22>; + regulator-compatible = "ldo19"; + regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@23 { + reg = <23>; + regulator-compatible = "ldo20"; + regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@24 { + reg = <24>; + regulator-compatible = "out5v"; + regulator-name = "usb0_vbus_reg"; + }; + + regulator@25 { + reg = <25>; + regulator-compatible = "out33v"; + regulator-name = "pmu_out3v3"; + }; + + regulator@26 { + reg = <26>; + regulator-compatible = "bbat"; + regulator-name = "pmu_bbat"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + regulator-always-on; + }; + + regulator@27 { + reg = <27>; + regulator-compatible = "sdby"; + regulator-name = "vdd_aon"; + regulator-always-on; + }; + + regulator@28 { + reg = <28>; + regulator-compatible = "vrtc"; + regulator-name = "vrtc,pmu_vccadc"; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -284,6 +562,21 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb0_vbus_reg: regulator { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8753-whistler", "nvidia,tegra-audio-wm8753"; -- cgit v1.2.3-58-ga151 From 172c6a13653ac8cd6a231293b87c93821e90c1d6 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 7 Sep 2012 06:49:47 +0900 Subject: gpio: samsung: add devicetree init for s3c24xx arches Until now the EXYNOS-SoC was the only Samsung-SoC supporting the GPIOs via the device tree. This patch implements dt-support for the s3c24xx arches. The controllers contain only 3 cells, as the underlying gpio controller does not support controlling the drive strength on a gpio level. Tested with the gpio-keys driver on a s3c2416 based machine. Signed-off-by: Heiko Stuebner Reviewed-by: Thomas Abraham Acked-by: Linus Walleij [kgene.kim@samsung.com: fixed build error] Signed-off-by: Kukjin Kim --- .../devicetree/bindings/gpio/gpio-samsung.txt | 43 +++++++++++++++ drivers/gpio/gpio-samsung.c | 63 ++++++++++++++++++++++ 2 files changed, 106 insertions(+) diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt index 5375625e8cd2..f1e5dfecf55d 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -39,3 +39,46 @@ Example: #gpio-cells = <4>; gpio-controller; }; + + +Samsung S3C24XX GPIO Controller + +Required properties: +- compatible: Compatible property value should be "samsung,s3c24xx-gpio". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes + should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [flags and pull up/down] + + Values for gpio specifier: + - Pin number: depending on the controller a number from 0 up to 15. + - Mux function: Depending on the SoC and the gpio bank the gpio can be set + as input, output or a special function + - Flags and Pull Up/Down: the values to use differ for the individual SoCs + example S3C2416/S3C2450: + 0 - Pull Up/Down Disabled. + 1 - Pull Down Enabled. + 2 - Pull Up Enabled. + Bit 16 (0x00010000) - Input is active low. + Consult the user manual for the correct values of Mux and Pull Up/Down. + +- gpio-controller: Specifies that the node is a gpio controller. +- #address-cells: should be 1. +- #size-cells: should be 1. + +Example: + + gpa: gpio-controller@56000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,s3c24xx-gpio"; + reg = <0x56000000 0x10>; + #gpio-cells = <3>; + gpio-controller; + }; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index ba126cc04073..f4814a889a5b 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -938,6 +938,67 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) s3c_gpiolib_track(chip); } +#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) +static int s3c24xx_gpio_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + unsigned int pin; + + if (WARN_ON(gc->of_gpio_n_cells < 3)) + return -EINVAL; + + if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells)) + return -EINVAL; + + if (gpiospec->args[0] > gc->ngpio) + return -EINVAL; + + pin = gc->base + gpiospec->args[0]; + + if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1]))) + pr_warn("gpio_xlate: failed to set pin function\n"); + if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff)) + pr_warn("gpio_xlate: failed to set pin pull up/down\n"); + + if (flags) + *flags = gpiospec->args[2] >> 16; + + return gpiospec->args[0]; +} + +static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = { + { .compatible = "samsung,s3c24xx-gpio", }, + {} +}; + +static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + struct gpio_chip *gc = &chip->chip; + u64 address; + + if (!of_have_populated_dt()) + return; + + address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset; + gc->of_node = of_find_matching_node_by_address(NULL, + s3c24xx_gpio_dt_match, address); + if (!gc->of_node) { + pr_info("gpio: device tree node not found for gpio controller" + " with base address %08llx\n", address); + return; + } + gc->of_gpio_n_cells = 3; + gc->of_xlate = s3c24xx_gpio_xlate; +} +#else +static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip, + u64 base, u64 offset) +{ + return; +} +#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */ + static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, int nr_chips, void __iomem *base) { @@ -962,6 +1023,8 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, gc->direction_output = samsung_gpiolib_2bit_output; samsung_gpiolib_add(chip); + + s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10); } } -- cgit v1.2.3-58-ga151 From b82b04e8eb27abe0cfe9cd7bf4fee8bb1bb9b013 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 29 Aug 2012 15:18:11 +0530 Subject: ARM: OMAP: omap_device: Do not overwrite resources allocated by OF layer With the new devices (like, AM33XX and OMAP5) we now only support DT boot mode of operation and now it is the time to start killing slowly the dependency on hwmod, so with this patch, we are starting with device resources. The idea here is implemented considering to both boot modes - - DT boot mode OF framework will construct the resource structure (currently does for MEM & IRQ resource) and we should respect/use these resources, killing hwmod dependency. If pdev->num_resources > 0, we assume that MEM & IRQ resources have been allocated by OF layer already (through DTB). Once DMA resource is available from OF layer, we should kill filling any resources from hwmod. - Non-DT boot mode Here, pdev->num_resources = 0, and we should get all the resources from hwmod (following existing steps) Signed-off-by: Vaibhav Hiremath Cc: Tony Lindgren Cc: Paul Walmsley Cc: Kevin Hilman [b-cousson@ti.com: Fix some checkpatch CHECK issues] Signed-off-by: Benoit Cousson --- arch/arm/mach-omap2/omap_hwmod.c | 27 +++++++++++ arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 + arch/arm/plat-omap/omap_device.c | 71 +++++++++++++++++++++++----- 3 files changed, 87 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e519968d..7768804457e3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3157,6 +3157,33 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) return r; } +/** + * omap_hwmod_fill_dma_resources - fill struct resource array with dma data + * @oh: struct omap_hwmod * + * @res: pointer to the array of struct resource to fill + * + * Fill the struct resource array @res with dma resource data from the + * omap_hwmod @oh. Intended to be called by code that registers + * omap_devices. See also omap_hwmod_count_resources(). Returns the + * number of array elements filled. + */ +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res) +{ + int i, sdma_reqs_cnt; + int r = 0; + + sdma_reqs_cnt = _count_sdma_reqs(oh); + for (i = 0; i < sdma_reqs_cnt; i++) { + (res + r)->name = (oh->sdma_reqs + i)->name; + (res + r)->start = (oh->sdma_reqs + i)->dma_req; + (res + r)->end = (oh->sdma_reqs + i)->dma_req; + (res + r)->flags = IORESOURCE_DMA; + r++; + } + + return r; +} + /** * omap_hwmod_get_resource_byname - fetch IP block integration data by name * @oh: struct omap_hwmod * to operate on diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 6132972aff37..5857b9cd6eb9 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -615,6 +615,7 @@ int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); +int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res); int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type, const char *name, struct resource *res); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index ff57b5aeba4e..6f5c58096819 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -493,6 +493,33 @@ static int omap_device_fill_resources(struct omap_device *od, return 0; } +/** + * _od_fill_dma_resources - fill in array of struct resource with dma resources + * @od: struct omap_device * + * @res: pointer to an array of struct resource to be filled in + * + * Populate one or more empty struct resource pointed to by @res with + * the dma resource data for this omap_device @od. Used by + * omap_device_alloc() after calling omap_device_count_resources(). + * + * Ideally this function would not be needed at all. If we have + * mechanism to get dma resources from DT. + * + * Returns 0. + */ +static int _od_fill_dma_resources(struct omap_device *od, + struct resource *res) +{ + int i, r; + + for (i = 0; i < od->hwmods_cnt; i++) { + r = omap_hwmod_fill_dma_resources(od->hwmods[i], res); + res += r; + } + + return 0; +} + /** * omap_device_alloc - allocate an omap_device * @pdev: platform_device that will be included in this omap_device @@ -532,24 +559,44 @@ struct omap_device *omap_device_alloc(struct platform_device *pdev, od->hwmods = hwmods; od->pdev = pdev; + res_count = omap_device_count_resources(od); /* - * HACK: Ideally the resources from DT should match, and hwmod - * should just add the missing ones. Since the name is not - * properly populated by DT, stick to hwmod resources only. + * DT Boot: + * OF framework will construct the resource structure (currently + * does for MEM & IRQ resource) and we should respect/use these + * resources, killing hwmod dependency. + * If pdev->num_resources > 0, we assume that MEM & IRQ resources + * have been allocated by OF layer already (through DTB). + * + * Non-DT Boot: + * Here, pdev->num_resources = 0, and we should get all the + * resources from hwmod. + * + * TODO: Once DMA resource is available from OF layer, we should + * kill filling any resources from hwmod. */ - if (pdev->num_resources && pdev->resource) - dev_warn(&pdev->dev, "%s(): resources already allocated %d\n", - __func__, pdev->num_resources); - - res_count = omap_device_count_resources(od); - if (res_count > 0) { - dev_dbg(&pdev->dev, "%s(): resources allocated from hwmod %d\n", - __func__, res_count); + if (res_count > pdev->num_resources) { + /* Allocate resources memory to account for new resources */ res = kzalloc(sizeof(struct resource) * res_count, GFP_KERNEL); if (!res) goto oda_exit3; - omap_device_fill_resources(od, res); + /* + * If pdev->num_resources > 0, then assume that, + * MEM and IRQ resources will only come from DT and only + * fill DMA resource from hwmod layer. + */ + if (pdev->num_resources && pdev->resource) { + dev_dbg(&pdev->dev, "%s(): resources already allocated %d\n", + __func__, res_count); + memcpy(res, pdev->resource, + sizeof(struct resource) * pdev->num_resources); + _od_fill_dma_resources(od, &res[pdev->num_resources]); + } else { + dev_dbg(&pdev->dev, "%s(): using resources from hwmod %d\n", + __func__, res_count); + omap_device_fill_resources(od, res); + } ret = platform_device_add_resources(pdev, res, res_count); kfree(res); -- cgit v1.2.3-58-ga151 From 6e6a9a504757e681e00d7212587950a925f66332 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Wed, 25 Jul 2012 10:57:58 +0530 Subject: ARM: dts: omap5-evm: Add I2C support Add I2C data nodes in omap5 device tree file. Signed-off-by: Sourav Poddar Acked-by: Santosh Shilimkar Acked-by: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 881d60cb12ae..424ad161aa44 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -145,6 +145,41 @@ #interrupt-cells = <1>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@4807A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; + + i2c5: i2c@4807C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; -- cgit v1.2.3-58-ga151 From 08f3e21b81d4907e8ef513d97805d02df008f7d2 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Wed, 25 Jul 2012 11:02:43 +0530 Subject: ARM: dts: omap5-evm: Add tmp102 sensor support Add tmp102 temperature sensor data in omap5 evm dts file. Signed-off-by: Sourav Poddar Acked-by: Santosh Shilimkar Acked-by: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5-evm.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 7bb0c9dc5257..1790f41ca23e 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -49,3 +49,13 @@ &mmc5 { status = "disabled"; }; + +&i2c4 { + clock-frequency = <400000>; + + /* Temperature Sensor */ + tmp102@48{ + compatible = "ti,tmp102"; + reg = <0x48>; + }; +}; -- cgit v1.2.3-58-ga151 From 5449fbc27b27317526391409b7bcacd2104a6a2f Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Wed, 25 Jul 2012 11:03:27 +0530 Subject: ARM: dts: omap5-evm: Add keypad data Add keypad data node in omap5 device tree file. Also fill the device tree binding parameters with the required value in "omap5-evm" dts file. Signed-off-by: Sourav Poddar Acked-by: Santosh Shilimkar Acked-by: Felipe Balbi [b-cousson@ti.com: Fix merge issue with MMC patches, put node at the proper place, align entries and comments] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5-evm.dts | 13 +++++++++++++ arch/arm/boot/dts/omap5.dtsi | 5 +++++ 2 files changed, 18 insertions(+) diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 1790f41ca23e..457d1ec7ed93 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -24,6 +24,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + }; &mmc1 { @@ -59,3 +60,15 @@ reg = <0x48>; }; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x02020073 /* VOLUP */ + 0x02030072 /* VOLDOWM */ + 0x020400e7 /* SEND */ + 0x02050066 /* HOME */ + 0x0206006b /* END */ + 0x020700d9>; /* SEARCH */ + linux,input-no-autorepeat; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 424ad161aa44..4c11ae1975cc 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -246,5 +246,10 @@ ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; }; }; -- cgit v1.2.3-58-ga151 From 288710151333ee2c730e9c9c26376c1dac83c292 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Wed, 25 Jul 2012 10:59:40 +0530 Subject: ARM: dts: omap5-evm: Add bmp085 sensor support Add bmp085 pressure sensor data in omap5 evm dts file. Signed-off-by: Sourav Poddar Acked-by: Santosh Shilimkar Acked-by: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5-evm.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 457d1ec7ed93..9c41a3f311aa 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -51,6 +51,16 @@ status = "disabled"; }; +&i2c2 { + clock-frequency = <400000>; + + /* Pressure Sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; +}; + &i2c4 { clock-frequency = <400000>; -- cgit v1.2.3-58-ga151 From 61bc35445baacab98f500b3367d40e9b8cf41c43 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Tue, 14 Aug 2012 16:45:37 +0530 Subject: ARM: dts: omap4-sdp: Add keypad data Add keypad data node in omap4 device tree file. Also fill the device tree binding parameters with the required value in "omap4-sdp" dts file. Signed-off-by: Sourav Poddar Cc: Tony Lindgren Cc: Rob Herring Cc: Grant Likely Cc: Felipe Balbi Signed-off-by: Benoit Cousson [b-cousson@ti.com: Re-align the entries and the comments] --- arch/arm/boot/dts/omap4-sdp.dts | 70 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 5 +++ 2 files changed, 75 insertions(+) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dbcdc4a79491..8869c1e209fe 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -226,3 +226,73 @@ bus-width = <4>; ti,non-removable; }; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 04cbbcb6ff91..7fc45bb8a951 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -295,5 +295,10 @@ interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; + + keypad: keypad@4a31c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; }; }; -- cgit v1.2.3-58-ga151 From 399264b897bc0efb4fb5c026705805bec9ed93b8 Mon Sep 17 00:00:00 2001 From: Sourav Poddar Date: Wed, 25 Jul 2012 10:57:58 +0530 Subject: Documentation: dt: i2c: trivial-devices: Update for tmp102 Add Description for tmp102 temperature sensor. Cc: Felipe Balbi Cc: Santosh Shilimkar Signed-off-by: Sourav Poddar Signed-off-by: Benoit Cousson --- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1a85f986961b..2f5322b119eb 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller +ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -- cgit v1.2.3-58-ga151 From 274c27b1f18060db6cc6bedad7812e5a7f97c6a4 Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Thu, 1 Dec 2011 17:47:09 +0530 Subject: Documentation: dt: device tree bindings for LPDDR2 memories device tree bindings for LPDDR2 SDRAM memories compliant to JESD209-2 standard. The 'lpddr2' binding in-turn uses another binding 'lpddr2-timings' for specifying the AC timing parameters of the memory device at different speed-bins. Reviewed-by: Benoit Cousson Reviewed-by: Grant Likely Tested-by: Lokesh Vutla Signed-off-by: Aneesh V [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar Signed-off-by: Benoit Cousson --- .../devicetree/bindings/lpddr2/lpddr2-timings.txt | 52 +++++++++++ .../devicetree/bindings/lpddr2/lpddr2.txt | 102 +++++++++++++++++++++ 2 files changed, 154 insertions(+) create mode 100644 Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt create mode 100644 Documentation/devicetree/bindings/lpddr2/lpddr2.txt diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt new file mode 100644 index 000000000000..9ceb19e0c7fd --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt @@ -0,0 +1,52 @@ +* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin + +Required properties: +- compatible : Should be "jedec,lpddr2-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is +- max-freq : maximum DDR clock frequency for the speed-bin. Type is + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type and the default unit is ps (pico seconds). Parameters with +a different unit have a suffix indicating the unit such as 'tRAS-max-ns' +- tRCD +- tWR +- tRAS-min +- tRRD +- tWTR +- tXP +- tRTP +- tDQSCK-max +- tFAW +- tZQCS +- tZQinit +- tRPab +- tZQCL +- tCKESR +- tRAS-max-ns +- tDQSCK-max-derated + +Example: + +timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; +}; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt new file mode 100644 index 000000000000..58354a075e13 --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt @@ -0,0 +1,102 @@ +* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 + +Required properties: +- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", + "jedec,lpddr2-s4" + + "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type + + "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type + + "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type + +- density : representing density in Mb (Mega bits) + +- io-width : representing bus width. Possible values are 8, 16, and 32 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRRD-min-tck +- tWTR-min-tck +- tXP-min-tck +- tRTP-min-tck +- tCKE-min-tck +- tRPab-min-tck +- tRCD-min-tck +- tWR-min-tck +- tRASmin-min-tck +- tCKESR-min-tck +- tFAW-min-tck + +Child nodes: +- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. Please see Documentation/devicetree/ + bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + +Example: + +elpida_ECB240ABACN : lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + +} -- cgit v1.2.3-58-ga151 From 6bc9c66e5657a33d19559fce730bfa36112cb1cc Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Sat, 17 Dec 2011 17:24:25 +0530 Subject: Documentation: dt: emif: device tree bindings for TI's EMIF sdram controller EMIF - External Memory Interface - is an SDRAM controller used in TI SoCs. EMIF supports, based on the IP revision, one or more of DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance of the EMIF IP and memory parts attached to it. Reviewed-by: Grant Likely Tested-by: Lokesh Vutla Signed-off-by: Aneesh V [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar Signed-off-by: Benoit Cousson --- .../bindings/memory-controllers/ti/emif.txt | 55 ++++++++++++++++++++++ 1 file changed, 55 insertions(+) create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti/emif.txt diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt new file mode 100644 index 000000000000..938f8e1ba205 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -0,0 +1,55 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : Should be of the form "ti,emif-" where + is the IP revision of the specific EMIF instance. + +- phy-type : indicating the DDR phy type. Following are the + allowed values + <1> : Attila PHY + <2> : Intelli PHY + +- device-handle : phandle to a "lpddr2" node representing the memory part + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif" where is the number of the EMIF + instance with base 1. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-dll-calib-ctrl: Have this property if the controller + supports dll calibration control + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + device-handle = <&elpida_ECB240ABACN>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +}; -- cgit v1.2.3-58-ga151 From 11c27069cf963f7445a7b515bcb703d90ae0c162 Mon Sep 17 00:00:00 2001 From: Aneesh V Date: Fri, 20 Jan 2012 20:35:26 +0530 Subject: ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards Device tree data for the EMIF sdram controllers in OMAP4 and LPDDR2 memory devices attached to OMAP4 boards. Reviewed-by: Grant Likely Tested-by: Lokesh Vutla Signed-off-by: Aneesh V [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar [b-cousson@ti.com: Use label in board to access EMIF nodes] Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/elpida_ecb240abacn.dtsi | 67 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4-panda.dts | 11 +++++ arch/arm/boot/dts/omap4-sdp.dts | 11 +++++ arch/arm/boot/dts/omap4.dtsi | 18 +++++++++ 4 files changed, 107 insertions(+) create mode 100644 arch/arm/boot/dts/elpida_ecb240abacn.dtsi diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 000000000000..f97f70f83374 --- /dev/null +++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,67 @@ +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9880c12877b3..20b966ee1bb3 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -126,3 +127,13 @@ ti,non-removable; bus-width = <4>; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 8869c1e209fe..7e83a61de0b2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -227,6 +228,16 @@ ti,non-removable; }; +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7fc45bb8a951..c7dc11feb9da 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -300,5 +300,23 @@ compatible = "ti,omap4-keypad"; ti,hwmods = "kbd"; }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif1"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; }; -- cgit v1.2.3-58-ga151 From 926fd45ba9eeb4c3d0454b934161ee884dd82a22 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 4 Jul 2012 17:57:34 +0530 Subject: ARM: OMAP4: Add L2 Cache Controller in Device Tree Provide PL310 Level 2 Cache Controller Device Tree support for OMAP4 based devices. Signed-off-by: Santosh Shilimkar Acked-by: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4.dtsi | 9 +++++++++ arch/arm/mach-omap2/omap4-common.c | 6 +++++- 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index c7dc11feb9da..cb18d2a2971c 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -30,12 +30,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; }; + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c29dee998a79..6f95992f37c6 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -171,7 +172,10 @@ static int __init omap_l2_cache_init(void) /* Enable PL310 L2 Cache controller */ omap_smc1(0x102, 0x1); - l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); + if (of_have_populated_dt()) + l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); + else + l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK); /* * Override default outer_cache.disable with a OMAP4 -- cgit v1.2.3-58-ga151 From eed0de27726a55f145490619510c8ec58c9dc767 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 4 Jul 2012 18:32:32 +0530 Subject: ARM: OMAP4: Add local timer support for Device Tree Add cortex-a9 local timer support for all OMAP4 based SOCs using DT. Signed-off-by: Santosh Shilimkar Acked-by: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4.dtsi | 6 ++++++ arch/arm/mach-omap2/timer.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index cb18d2a2971c..2b670ab86eae 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -45,6 +45,12 @@ cache-level = <2>; }; + local-timer@0x48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x20>; + interrupts = <1 13 0x304>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41ec6c6..31f9c936125f 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -386,6 +387,11 @@ static void __init omap4_timer_init(void) if (omap_rev() != OMAP4430_REV_ES1_0) { int err; + if (of_have_populated_dt()) { + twd_local_timer_of_register(); + return; + } + err = twd_local_timer_register(&twd_local_timer); if (err) pr_err("twd_local_timer_register failed %d\n", err); -- cgit v1.2.3-58-ga151 From 5635121edb18cda14a60e4702f3ae53add5df894 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Mon, 3 Sep 2012 17:56:32 +0200 Subject: ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP Remove some useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP. This will not change the functionality but will reflect the reality more accurately. Signed-off-by: Benoit Cousson Acked-by: Santosh Shilimkar --- arch/arm/boot/dts/omap4.dtsi | 40 ++++++++-------------------------------- 1 file changed, 8 insertions(+), 32 deletions(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 2b670ab86eae..1853dc73085b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -38,6 +38,14 @@ }; }; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + L2: l2-cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; @@ -76,30 +84,6 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -111,14 +95,6 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; - }; - gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1"; -- cgit v1.2.3-58-ga151 From f74ce8fb849e9f9c54a494cff5fc30d53ca4e963 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Wed, 5 Sep 2012 09:46:25 +0200 Subject: gpio/twl4030: get platform data from device tree Adds a number of missing device tree properties for twl4030/gpio, and update bindings: - "ti,use-leds" -> .use_leds - "ti,debounce" -> .debounce - "ti,mmc-cd" -> .mmc_cd - "ti,pullups" -> .pullups - "ti,pulldowns" -> .pulldowns Signed-off-by: Florian Vaussard Acked-by: Linus Walleij Acked-by: Vaibhav Hiremath [b-cousson@ti.com: Fix some checkpatch CHECK issues] Signed-off-by: Benoit Cousson --- .../devicetree/bindings/gpio/gpio-twl4030.txt | 6 ++ drivers/gpio/gpio-twl4030.c | 82 +++++++++++++++------- 2 files changed, 61 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 16695d9cf1e8..66788fda1db3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. +- ti,use-leds : Enables LEDA and LEDB outputs if set +- ti,debounce : if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -20,4 +25,5 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; + ti,use-leds; }; diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 94256fe7bf36..f923252da839 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -395,6 +395,31 @@ static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) static int gpio_twl4030_remove(struct platform_device *pdev); +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) +{ + struct twl4030_gpio_platform_data *omap_twl_info; + + omap_twl_info = devm_kzalloc(dev, sizeof(*omap_twl_info), GFP_KERNEL); + if (!omap_twl_info) + return NULL; + + omap_twl_info->gpio_base = -1; + + omap_twl_info->use_leds = of_property_read_bool(dev->of_node, + "ti,use-leds"); + + of_property_read_u32(dev->of_node, "ti,debounce", + &omap_twl_info->debounce); + of_property_read_u32(dev->of_node, "ti,mmc-cd", + (u32 *)&omap_twl_info->mmc_cd); + of_property_read_u32(dev->of_node, "ti,pullups", + &omap_twl_info->pullups); + of_property_read_u32(dev->of_node, "ti,pulldowns", + &omap_twl_info->pulldowns); + + return omap_twl_info; +} + static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; @@ -423,39 +448,42 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev) twl4030_gpio_irq_base = irq_base; no_irqs: - twl_gpiochip.base = -1; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - if (pdata) { - twl_gpiochip.base = pdata->gpio_base; + if (node) + pdata = of_gpio_twl4030(&pdev->dev); - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - /* - * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform data is missing\n"); + return -ENXIO; } + twl_gpiochip.base = pdata->gpio_base; + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); -- cgit v1.2.3-58-ga151 From a60be2fe9735894b8e0e2de80d2bdb37d87cd0c5 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Wed, 5 Sep 2012 09:46:26 +0200 Subject: ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM Add device tree properties for twl4030/gpio, according to the platform data of corresponding boards. This enables the led connected to LEDB output for both boards, as well as pullups/pulldowns on GPIO for the BeagleBoard. Signed-off-by: Florian Vaussard Acked-by: Linus Walleij Acked-by: Vaibhav Hiremath --- arch/arm/boot/dts/omap3-beagle.dts | 20 ++++++++++++++++++++ arch/arm/boot/dts/omap3-evm.dts | 13 +++++++++++++ 2 files changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index e60cba0ed6f1..3fe35c27ce1c 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -17,6 +17,14 @@ device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + }; }; &i2c1 { @@ -67,3 +75,15 @@ &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9182ce..e8ba1c247a39 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds; +}; -- cgit v1.2.3-58-ga151 From 1c1737e5635d902e125394d7f66bccaf0f8c772c Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 5 Sep 2012 16:42:04 +0200 Subject: ARM: dts: omap3-beagle: Add heartbeat and mmc LEDs support Add the support for D6 and D7 LEDs on Beagle board. - D6 will be used for heartbeat - D7 will be used for mmc0 Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-beagle.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 3fe35c27ce1c..ca46fb2b5803 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -24,6 +24,18 @@ label = "beagleboard::pmu_stat"; gpios = <&twl_gpio 19 0>; /* LEDB */ }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; }; }; -- cgit v1.2.3-58-ga151 From 3f187f82948c236cfbc7df3783df50eedcf62d03 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 26 Jul 2012 17:01:32 +0300 Subject: ARM: dts: omap2: Add McBSP entries for OMAP2420 and OMAP2430 SoC The McBSP IP within OMAP2420 and 2430 is different we need to create separate dtsi files for them. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap2420.dtsi | 39 +++++++++++++++++++ arch/arm/boot/dts/omap2430.dtsi | 83 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+) create mode 100644 arch/arm/boot/dts/omap2420.dtsi create mode 100644 arch/arm/boot/dts/omap2430.dtsi diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi new file mode 100644 index 000000000000..6174d3d93b1f --- /dev/null +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -0,0 +1,39 @@ +/* + * Device Tree Source for OMAP2420 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2420", "ti,omap2"; + + ocp { + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi new file mode 100644 index 000000000000..59a639a33794 --- /dev/null +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -0,0 +1,83 @@ +/* + * Device Tree Source for OMAP243x SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2"; + + ocp { + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <64>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>, /* RX interrupt */ + <61>; /* RX overflow interrupt */ + interrupt-names = "common", "tx", "rx", "rx_overflow"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@4808c000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808c000 0xff>; + reg-names = "mpu"; + interrupts = <17>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@4808e000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808e000 0xff>; + reg-names = "mpu"; + interrupts = <18>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <19>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 40c9e5cacfc186b537b402a59319cd6a88ce338b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 8 Aug 2012 11:02:52 +0300 Subject: ARM: dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2 Since the board is based on OMAP2420 we should include the dedicated dtsi file (which includes the common omap2 dtsi). Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap2420-h4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 25b50b759dec..77b84e17c477 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2.dtsi" +/include/ "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; -- cgit v1.2.3-58-ga151 From 0be484bf4d0e9a78520b9e576de03de89e9d5882 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 5 Sep 2012 14:21:22 +0300 Subject: ARM: dts: omap3: Add McBSP entries Create the needed sections to be able to probe McBSP ports via DT. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3.dtsi | 69 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 810947198208..f024bb3034a6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -220,5 +220,74 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <17>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>, /* RX interrupt */ + <4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@49024000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49024000 0xff>, + <0x4902a000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <22>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>, /* RX interrupt */ + <5>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@49026000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49026000 0xff>; + reg-names = "mpu"; + interrupts = <23>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <27>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; }; }; -- cgit v1.2.3-58-ga151 From 2995a10002e20b5acfbaf9553ca1f22d9575f032 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 26 Jul 2012 17:13:21 +0300 Subject: ARM: dts: omap4: Add McBSP entries Create the sections describing the McBSP ports to be able to use them via DT. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4.dtsi | 47 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 1853dc73085b..5ed3b944965b 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -287,6 +287,53 @@ ti,hwmods = "dmic"; }; + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@48096000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x48096000 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <0 16 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + keypad: keypad@4a31c000 { compatible = "ti,omap4-keypad"; ti,hwmods = "kbd"; -- cgit v1.2.3-58-ga151 From 63467cf23284588901f2edfcaabbfdef489ffc9b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Aug 2012 16:31:06 +0300 Subject: ARM: dts: omap4: Add reg-names for McPDM and DMIC In order to get the memory areas by name when booted with DT. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 5ed3b944965b..9f851dfe7507 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -273,6 +273,7 @@ compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -282,6 +283,7 @@ compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; -- cgit v1.2.3-58-ga151 From ffd5db24e7491135da12d73244d6974153f4765f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Aug 2012 16:31:04 +0300 Subject: ARM: dts: omap5: Add McBSP entries Create the sections describing the McBSP ports to be able to use them via DT. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 4c11ae1975cc..aa97e9318def 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -251,5 +251,41 @@ compatible = "ti,omap4-keypad"; ti,hwmods = "kbd"; }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; }; }; -- cgit v1.2.3-58-ga151 From cbb57f071f4dbd7684e6b7280dbc2286fdcecf0b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Aug 2012 16:31:07 +0300 Subject: ARM: dts: omap5: Add McPDM and DMIC section to the dtsi file To be able to load the McPDM and DMIC driver when booted with device tree. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap5.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index aa97e9318def..9ac75b37c992 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -252,6 +252,26 @@ ti,hwmods = "kbd"; }; + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; + mcbsp1: mcbsp@40122000 { compatible = "ti,omap4-mcbsp"; reg = <0x40122000 0xff>, /* MPU private access */ -- cgit v1.2.3-58-ga151 From 2c195f9cebeb03f7fb10ede6aeca5ce3ce6ed350 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 29 Aug 2012 16:31:05 +0300 Subject: ARM: dts: omap3-beagle: Enable audio support Add the needed sections to enable audio support on BeagleBoard when booted with DT blob. Signed-off-by: Peter Ujfalusi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-beagle.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index ca46fb2b5803..a9d98d5ade9a 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -37,6 +37,14 @@ linux,default-trigger = "mmc0"; }; }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -52,6 +60,12 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; -- cgit v1.2.3-58-ga151 From 5d83cb86227baf87ab04a646d60fb8b26b880743 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 27 Aug 2012 16:59:08 +0530 Subject: ARM: dts: AM33XX: Convert all hex numbers to lower-case To make it consistent, convert all hex number presentation to lower-case from all am33xx specific nodes. Signed-off-by: Vaibhav Hiremath Cc: Tony Lindgren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am335x-bone.dts | 4 ++-- arch/arm/boot/dts/am335x-evm.dts | 8 ++++---- arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++---------- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 917e7843bee7..c634f87e230e 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -19,11 +19,11 @@ }; ocp { - uart1: serial@44E09000 { + uart1: serial@44e09000 { status = "okay"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 9fcbacdb8f38..185d6325a458 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -19,16 +19,16 @@ }; ocp { - uart1: serial@44E09000 { + uart1: serial@44e09000 { status = "okay"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { status = "okay"; clock-frequency = <400000>; - tps: tps@2D { - reg = <0x2D>; + tps: tps@2d { + reg = <0x2d>; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index dde76f7e81a8..be435117f5dd 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -71,7 +71,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -80,7 +80,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -89,7 +89,7 @@ #interrupt-cells = <1>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -98,7 +98,7 @@ #interrupt-cells = <1>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; @@ -119,28 +119,28 @@ status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -148,7 +148,7 @@ status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -156,7 +156,7 @@ status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-58-ga151 From 4462b31cf416e74e54a37b57de7177cc4d244699 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 27 Aug 2012 17:21:01 +0530 Subject: ARM: dts: AM33XX: Specify reg and interrupt property for all nodes The device/node resources (like, IORESOURCE_MEM and IORESOURCE_IRQ) are overwritten by hwmod resources, due to all known reasons but that should not be the reason for not providing all the information in the DTS blob. Ideally we should use DTS resource and use HWMOD framework wherever required and for only specific things. Newer platforms like, OMAP5 and AM33XX, we only support DT boot mode, so this patch is preparation for the future where we supposed to get rid of hwmod dependency anyway. Signed-off-by: Vaibhav Hiremath Cc: Tony Lindgren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am33xx.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index be435117f5dd..bb31bff01998 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,6 +69,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; gpio2: gpio@4804c000 { @@ -78,6 +81,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; gpio3: gpio@481ac000 { @@ -87,6 +93,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; gpio4: gpio@481ae000 { @@ -96,12 +105,18 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; status = "disabled"; }; @@ -109,6 +124,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; status = "disabled"; }; @@ -116,6 +134,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; status = "disabled"; }; @@ -123,6 +144,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; status = "disabled"; }; @@ -130,6 +154,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; status = "disabled"; }; @@ -137,6 +164,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; status = "disabled"; }; @@ -145,6 +175,9 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; status = "disabled"; }; @@ -153,6 +186,9 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; status = "disabled"; }; @@ -161,12 +197,18 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; -- cgit v1.2.3-58-ga151 From 48420dbcf2168004f8a5ed9f1ecd2d877dc798da Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 5 Sep 2012 11:38:23 +0200 Subject: ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson Cc: Santosh Shilimkar Cc: Tony Lindgren Cc: Felipe Balbi Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap4.dtsi | 55 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 9f851dfe7507..75095e306d77 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -97,6 +97,8 @@ gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; + reg = <0x4a310000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -106,6 +108,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -115,6 +119,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -124,6 +130,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -133,6 +141,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -142,6 +152,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -151,30 +163,40 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -182,6 +204,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -189,6 +213,8 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -196,6 +222,8 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; + reg = <0x48350000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -203,6 +231,8 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -211,6 +241,8 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -219,6 +251,8 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -227,6 +261,8 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -235,6 +271,8 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -242,30 +280,40 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x4a314000 0x80>; + interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -338,11 +386,16 @@ keypad: keypad@4a31c000 { compatible = "ti,omap4-keypad"; + reg = <0x4a31c000 0x80>; + interrupts = <0 120 0x4>; + reg-names = "mpu"; ti,hwmods = "kbd"; }; emif1: emif@4c000000 { compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <0 110 0x4>; ti,hwmods = "emif1"; phy-type = <1>; hw-caps-read-idle-ctrl; @@ -352,6 +405,8 @@ emif2: emif@4d000000 { compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <0 111 0x4>; ti,hwmods = "emif2"; phy-type = <1>; hw-caps-read-idle-ctrl; -- cgit v1.2.3-58-ga151 From bc7fedad82deb398f440b875f54dc81f931a71e3 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 Aug 2012 18:06:11 +0200 Subject: ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board The Gumstix Overo is a computer on module using an OMAP3 processor. This module must be plugged into an expansion board. This patch adds a first device tree support for the Overo, using the Tobi expansion board. The current support is able to boot and mount the rootfs from MMC. This patche also updates the omap3 dtb build target. Currently working: - mmc0 (on board microSD) - i2c0 and i2c2 (i2c1 not used) - led on GPIO Signed-off-by: Florian Vaussard Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-overo.dtsi | 42 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-tobi.dts | 35 +++++++++++++++++++++++++++++++ arch/arm/mach-omap2/Makefile.boot | 2 +- 3 files changed, 78 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/omap3-overo.dtsi create mode 100644 arch/arm/boot/dts/omap3-tobi.dts diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi new file mode 100644 index 000000000000..d6cc5e2671e7 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Gumstix Overo must be combined with an expansion board. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +/* i2c2 pins are used for gpio */ +&i2c2 { + status = "disabled"; +}; + +/* on board microSD slot */ +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +/* optional on board WiFi */ +&mmc2 { + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts new file mode 100644 index 000000000000..a13d12de77ff --- /dev/null +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/include/ "omap3-overo.dtsi" + +/ { + model = "TI OMAP3 Gumstix Overo on Tobi"; + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 6cf1c2d336da..18813ab1bb3c 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -3,7 +3,7 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb omap3-tobi.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb -- cgit v1.2.3-58-ga151 From 807e1b426db755a605f0aa03604c1cd00630e727 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Fri, 31 Aug 2012 18:06:12 +0200 Subject: Documentation: dt: Update the OMAP documentation with Overo/Toby Add the Tobi/Overo board to the list of supported platforms. Signed-off-by: Florian Vaussard Signed-off-by: Benoit Cousson --- Documentation/devicetree/bindings/arm/omap/omap.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ccdd0e53451f..d0051a750587 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,6 +36,9 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" +- OMAP3 Tobi with Overo : Commercial expansion board with daughter board + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" -- cgit v1.2.3-58-ga151 From a135f2f82c64fa779adbc19b41e21039a258a6a4 Mon Sep 17 00:00:00 2001 From: Florian Vaussard Date: Mon, 10 Sep 2012 15:16:36 +0200 Subject: ARM: dts: omap3-overo: Add support for the blue LED Support the blue LED connected to the LEDB pin of the TWL4030 on the Gumstix Overo. Signed-off-by: Florian Vaussard Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/omap3-overo.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index d6cc5e2671e7..89808ce01673 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -13,6 +13,17 @@ /include/ "omap3.dtsi" +/ { + leds { + compatible = "gpio-leds"; + overo { + label = "overo:blue:COM"; + gpios = <&twl_gpio 19 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + &i2c1 { clock-frequency = <2600000>; @@ -40,3 +51,7 @@ &mmc2 { bus-width = <4>; }; + +&twl_gpio { + ti,use-leds; +}; -- cgit v1.2.3-58-ga151 From 642f12b4c7505943a6f50101d5b087a74fd9ae72 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 10 Sep 2012 10:20:44 -0700 Subject: arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm The extra serial port is not available on 34xx. And the current omap3-beagle.dts file is for omap3-beagle-xm.dts as it lists 512MB of memory. Please somebody submit a new omap3-beagle.dts for the original 34xx BeagleBoard after testing it properly. Cc: Benoit Cousson Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 115 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-beagle.dts | 115 ---------------------------------- arch/arm/boot/dts/omap3.dtsi | 7 --- arch/arm/boot/dts/omap36xx.dtsi | 25 ++++++++ arch/arm/mach-omap2/Makefile.boot | 2 +- 5 files changed, 141 insertions(+), 123 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-beagle-xm.dts delete mode 100644 arch/arm/boot/dts/omap3-beagle.dts create mode 100644 arch/arm/boot/dts/omap36xx.dtsi diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts new file mode 100644 index 000000000000..c38cf76df81f --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap36xx.dtsi" + +/ { + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + vsim: regulator-vsim { + compatible = "ti,twl4030-vsim"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in the EEPROM + * as EDID data. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts deleted file mode 100644 index a9d98d5ade9a..000000000000 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -/include/ "omap3.dtsi" - -/ { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB */ - }; - - leds { - compatible = "gpio-leds"; - pmu_stat { - label = "beagleboard::pmu_stat"; - gpios = <&twl_gpio 19 0>; /* LEDB */ - }; - - heartbeat { - label = "beagleboard::usr0"; - gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "beagleboard::usr1"; - gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ - linux,default-trigger = "mmc0"; - }; - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "omap3beagle"; - - ti,mcbsp = <&mcbsp2>; - ti,codec = <&twl_audio>; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - - vsim: regulator-vsim { - compatible = "ti,twl4030-vsim"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - }; - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; - }; -}; - -/include/ "twl4030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in the EEPROM - * as EDID data. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&twl_gpio { - ti,use-leds; - /* pullups: BIT(1) */ - ti,pullups = <0x000002>; - /* - * pulldowns: - * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) - * BIT(15), BIT(16), BIT(17) - */ - ti,pulldowns = <0x03a1c4>; -}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f024bb3034a6..05c26c4f6606 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -141,12 +140,6 @@ clock-frequency = <48000000>; }; - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 000000000000..96bf0287cb9f --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 18813ab1bb3c..be0fe9226d67 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -3,7 +3,7 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb omap3-tobi.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb -- cgit v1.2.3-58-ga151 From 679e33104dbf9b78d88b812fc3c1ac88536d24bf Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 10 Sep 2012 10:34:51 -0700 Subject: arm/dts: Add pinctrl driver entries for omap2/3/4 Add pinctrl driver entries for omap2+. These all use the generic pinctrl-single driver for the padconf registers. Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Linus Walleij [tony@atomide.com: updated to drop omap2420.dtsi rename changes] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2420.dtsi | 9 +++++++++ arch/arm/boot/dts/omap2430.dtsi | 9 +++++++++ arch/arm/boot/dts/omap3.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 17 +++++++++++++++++ 4 files changed, 53 insertions(+) diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 6174d3d93b1f..bfd76b4a0ddc 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,15 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + omap2420_pmx: pinmux@48000030 { + compatible = "ti,omap2420-padconf", "pinctrl-single"; + reg = <0x48000030 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2420-mcbsp"; reg = <0x48074000 0xff>; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 59a639a33794..4565d9750f4d 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,15 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + omap2430_pmx: pinmux@49002030 { + compatible = "ti,omap2430-padconf", "pinctrl-single"; + reg = <0x49002030 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + mcbsp1: mcbsp@48074000 { compatible = "ti,omap2430-mcbsp"; reg = <0x48074000 0xff>; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 05c26c4f6606..f38ea8771b44 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -68,6 +68,24 @@ reg = <0x48200000 0x1000>; }; + omap3_pmx_core: pinmux@48002030 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002030 0x05cc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap3_pmx_wkup: pinmux@0x48002a58 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002a58 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; ti,hwmods = "gpio1"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 75095e306d77..5d1c48459e6e 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -95,6 +95,23 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + omap4_pmx_core: pinmux@4a100040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap4_pmx_wkup: pinmux@4a31e040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a31e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; -- cgit v1.2.3-58-ga151 From 8f31cefe32b9c6bcab43e0ec79fb26393d5c7713 Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Mon, 10 Sep 2012 10:34:52 -0700 Subject: ARM: OMAP2+: select PINCTRL in Kconfig Select PINCTRL in Kconfig under Typical OMAP configuration, this is required to add pinctrl driver to omap2+ family of devices. Signed-off-by: AnilKumar Ch [tony@atomide.com: updated to select pinctrl-single in defconfig] Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + arch/arm/mach-omap2/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index e58edc36b406..62303043db9c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4a4d058ed146..e45bbffb7eec 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -18,6 +18,7 @@ config ARCH_OMAP2PLUS_TYPICAL select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4 select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4 select HIGHMEM + select PINCTRL help Compile a kernel suitable for booting most boards -- cgit v1.2.3-58-ga151 From 26638c667e645de368cd68cade716ed0faef6269 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 10 Sep 2012 10:34:52 -0700 Subject: arm/dts: Mux uart pins for omap4-sdp Mux uart pins for the serial ports. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-sdp.dts | 42 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 7e83a61de0b2..94a23b39033d 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -116,6 +116,33 @@ }; }; +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ + 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ + 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ + 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ + 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ + 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ + 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ + 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -307,3 +334,18 @@ 0x0707006c>; /* KEY_DOWN */ linux,input-no-autorepeat; }; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; -- cgit v1.2.3-58-ga151 From 13b4569bbbcf58891727138b84b8db5ea4178d32 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 10 Sep 2012 22:35:41 +0200 Subject: ARM: dts: cfa10049: Add the 74HC595 gpio expanders Add the two daisy-chains of 74hc595s shift registers available on the CFA-10049. Signed-off-by: Maxime Ripard Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-cfa10049.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 1f7fa50414b6..05c892e931e3 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -27,6 +27,8 @@ fsl,pinmux-ids = < 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ + 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ + 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -39,6 +41,25 @@ pinctrl-names = "default"; pinctrl-0 = <&spi3_pins_cfa10049>; status = "okay"; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + + gpio6: gpio6@1 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + }; }; -- cgit v1.2.3-58-ga151 From b598b9f311a604ca533033baa5afcf45beb037d9 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:36:29 +0800 Subject: clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup It really becomes a maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx28 client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo --- .../devicetree/bindings/clock/imx28-clock.txt | 99 ++++++++++++++++++ arch/arm/boot/dts/imx28.dtsi | 35 ++++++- drivers/clk/mxs/clk-imx28.c | 113 ++------------------- 3 files changed, 142 insertions(+), 105 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx28-clock.txt diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt new file mode 100644 index 000000000000..aa2af2866fe8 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -0,0 +1,99 @@ +* Clock bindings for Freescale i.MX28 + +Required properties: +- compatible: Should be "fsl,imx28-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX28 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_pwr 62 + usb1_pwr 63 + enet_out 64 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 45 */ + ... + "end_of_list"; +}; + +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 96fe74e4935c..03e0fef8e7a7 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -65,6 +65,7 @@ dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 25>; }; perfmon@80006000 { @@ -81,6 +82,7 @@ reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 50>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -90,6 +92,7 @@ #size-cells = <0>; reg = <0x80010000 0x2000>; interrupts = <96 82>; + clocks = <&clks 46>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; @@ -99,6 +102,7 @@ #size-cells = <0>; reg = <0x80012000 0x2000>; interrupts = <97 83>; + clocks = <&clks 47>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -108,6 +112,7 @@ #size-cells = <0>; reg = <0x80014000 0x2000>; interrupts = <98 84>; + clocks = <&clks 48>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -117,6 +122,7 @@ #size-cells = <0>; reg = <0x80016000 0x2000>; interrupts = <99 85>; + clocks = <&clks 49>; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -606,6 +612,7 @@ dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 26>; }; dcp@80028000 { @@ -634,6 +641,7 @@ compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; interrupts = <38 86>; + clocks = <&clks 55>; status = "disabled"; }; @@ -641,6 +649,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; + clocks = <&clks 58>, <&clks 58>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -648,6 +658,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; + clocks = <&clks 59>, <&clks 59>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -694,15 +706,17 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + clocks = <&clks 53>; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -716,6 +730,7 @@ compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58 81>; + clocks = <&clks 54>; fsl,saif-dma-channel = <5>; status = "disabled"; }; @@ -763,6 +778,7 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 44>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; @@ -777,6 +793,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + clocks = <&clks 45>; status = "disabled"; }; @@ -784,6 +801,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + clocks = <&clks 45>; status = "disabled"; }; @@ -791,6 +809,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + clocks = <&clks 45>; status = "disabled"; }; @@ -798,6 +817,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + clocks = <&clks 45>; status = "disabled"; }; @@ -805,6 +825,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + clocks = <&clks 45>; status = "disabled"; }; @@ -812,18 +833,22 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80074000 0x1000>; interrupts = <47>; + clocks = <&clks 45>, <&clks 26>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; usbphy0: usbphy@8007c000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 62>; status = "disabled"; }; usbphy1: usbphy@8007e000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; + clocks = <&clks 63>; status = "disabled"; }; }; @@ -840,6 +865,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; interrupts = <93>; + clocks = <&clks 60>; fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -848,6 +874,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; interrupts = <92>; + clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -861,6 +888,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -868,6 +897,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f4000 0x4000>; interrupts = <102>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index e3aab67b3eb7..613e76f3758e 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include "clk.h" @@ -120,90 +121,6 @@ static void __init clk_misc_init(void) writel_relaxed(val, FRAC0); } -static struct clk_lookup uart_lookups[] = { - { .dev_id = "duart", }, - { .dev_id = "mxs-auart.0", }, - { .dev_id = "mxs-auart.1", }, - { .dev_id = "mxs-auart.2", }, - { .dev_id = "mxs-auart.3", }, - { .dev_id = "mxs-auart.4", }, - { .dev_id = "8006a000.serial", }, - { .dev_id = "8006c000.serial", }, - { .dev_id = "8006e000.serial", }, - { .dev_id = "80070000.serial", }, - { .dev_id = "80072000.serial", }, - { .dev_id = "80074000.serial", }, -}; - -static struct clk_lookup hbus_lookups[] = { - { .dev_id = "imx28-dma-apbh", }, - { .dev_id = "80004000.dma-apbh", }, -}; - -static struct clk_lookup xbus_lookups[] = { - { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "80074000.serial", .con_id = "apb_pclk"}, - { .dev_id = "imx28-dma-apbx", }, - { .dev_id = "80024000.dma-apbx", }, -}; - -static struct clk_lookup ssp0_lookups[] = { - { .dev_id = "imx28-mmc.0", }, - { .dev_id = "80010000.ssp", }, -}; - -static struct clk_lookup ssp1_lookups[] = { - { .dev_id = "imx28-mmc.1", }, - { .dev_id = "80012000.ssp", }, -}; - -static struct clk_lookup ssp2_lookups[] = { - { .dev_id = "imx28-mmc.2", }, - { .dev_id = "80014000.ssp", }, -}; - -static struct clk_lookup ssp3_lookups[] = { - { .dev_id = "imx28-mmc.3", }, - { .dev_id = "80016000.ssp", }, -}; - -static struct clk_lookup lcdif_lookups[] = { - { .dev_id = "imx28-fb", }, - { .dev_id = "80030000.lcdif", }, -}; - -static struct clk_lookup gpmi_lookups[] = { - { .dev_id = "imx28-gpmi-nand", }, - { .dev_id = "8000c000.gpmi-nand", }, -}; - -static struct clk_lookup fec_lookups[] = { - { .dev_id = "imx28-fec.0", }, - { .dev_id = "imx28-fec.1", }, - { .dev_id = "800f0000.ethernet", }, - { .dev_id = "800f4000.ethernet", }, -}; - -static struct clk_lookup can0_lookups[] = { - { .dev_id = "flexcan.0", }, - { .dev_id = "80032000.can", }, -}; - -static struct clk_lookup can1_lookups[] = { - { .dev_id = "flexcan.1", }, - { .dev_id = "80034000.can", }, -}; - -static struct clk_lookup saif0_lookups[] = { - { .dev_id = "mxs-saif.0", }, - { .dev_id = "80042000.saif", }, -}; - -static struct clk_lookup saif1_lookups[] = { - { .dev_id = "mxs-saif.1", }, - { .dev_id = "80046000.saif", }, -}; - static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", }; static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", }; @@ -228,6 +145,7 @@ enum imx28_clk { }; static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; static enum imx28_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, @@ -235,6 +153,7 @@ static enum imx28_clk clks_init_on[] __initdata = { int __init mx28_clocks_init(void) { + struct device_node *np; int i; clk_misc_init(); @@ -312,27 +231,15 @@ int __init mx28_clocks_init(void) return PTR_ERR(clks[i]); } + np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl"); + if (np) { + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clks[clk32k], NULL, "timrot"); clk_register_clkdev(clks[enet_out], NULL, "enet_out"); - clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); - clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); - clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); - clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); - clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups)); - clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups)); - clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups)); - clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups)); - clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); - clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups)); - clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups)); - clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); - clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups)); - clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups)); - clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups)); - clk_register_clkdev(clks[usb0_pwr], NULL, "8007c000.usbphy"); - clk_register_clkdev(clks[usb1_pwr], NULL, "8007e000.usbphy"); - clk_register_clkdev(clks[usb0], NULL, "80080000.usb"); - clk_register_clkdev(clks[usb1], NULL, "80090000.usb"); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); -- cgit v1.2.3-58-ga151 From 53f9443da63db38212e784b0aa205881168757aa Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:36:30 +0800 Subject: clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup It really becomes a maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx23 client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo --- .../devicetree/bindings/clock/imx23-clock.txt | 76 ++++++++++++++++++++++ arch/arm/boot/dts/imx23.dtsi | 16 ++++- drivers/clk/mxs/clk-imx23.c | 55 +++------------- 3 files changed, 100 insertions(+), 47 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx23-clock.txt diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt new file mode 100644 index 000000000000..a0b867ef8d96 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -0,0 +1,76 @@ +* Clock bindings for Freescale i.MX23 + +Required properties: +- compatible: Should be "fsl,imx23-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX23 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_pwr 41 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 32 */ + ... + "end_of_list"; +}; + +auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index b00f3cfb3bf8..9d0e803e3eca 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -52,6 +52,7 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 15>; }; ecc@80008000 { @@ -67,6 +68,7 @@ reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 34>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -74,6 +76,7 @@ ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; interrupts = <15 14>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -290,6 +293,7 @@ dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 16>; }; dcp@80028000 { @@ -316,12 +320,14 @@ compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; interrupts = <46 45>; + clocks = <&clks 38>; status = "disabled"; }; ssp1: ssp@80034000 { reg = <0x80034000 0x2000>; interrupts = <2 20>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -339,9 +345,10 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { @@ -393,6 +400,7 @@ pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 30>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; @@ -407,6 +415,7 @@ compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; + clocks = <&clks 32>; status = "disabled"; }; @@ -414,6 +423,7 @@ compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; + clocks = <&clks 32>; status = "disabled"; }; @@ -421,6 +431,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80070000 0x2000>; interrupts = <0>; + clocks = <&clks 32>, <&clks 16>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index 844043ad0fe4..9f6d15546cbe 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include "clk.h" @@ -71,44 +72,6 @@ static void __init clk_misc_init(void) __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); } -static struct clk_lookup uart_lookups[] = { - { .dev_id = "duart", }, - { .dev_id = "mxs-auart.0", }, - { .dev_id = "mxs-auart.1", }, - { .dev_id = "8006c000.serial", }, - { .dev_id = "8006e000.serial", }, - { .dev_id = "80070000.serial", }, -}; - -static struct clk_lookup hbus_lookups[] = { - { .dev_id = "imx23-dma-apbh", }, - { .dev_id = "80004000.dma-apbh", }, -}; - -static struct clk_lookup xbus_lookups[] = { - { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "80070000.serial", .con_id = "apb_pclk"}, - { .dev_id = "imx23-dma-apbx", }, - { .dev_id = "80024000.dma-apbx", }, -}; - -static struct clk_lookup ssp_lookups[] = { - { .dev_id = "imx23-mmc.0", }, - { .dev_id = "imx23-mmc.1", }, - { .dev_id = "80010000.ssp", }, - { .dev_id = "80034000.ssp", }, -}; - -static struct clk_lookup lcdif_lookups[] = { - { .dev_id = "imx23-fb", }, - { .dev_id = "80030000.lcdif", }, -}; - -static struct clk_lookup gpmi_lookups[] = { - { .dev_id = "imx23-gpmi-nand", }, - { .dev_id = "8000c000.gpmi-nand", }, -}; - static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", }; @@ -127,6 +90,7 @@ enum imx23_clk { }; static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; static enum imx23_clk clks_init_on[] __initdata = { cpu, hbus, xbus, emi, uart, @@ -134,6 +98,7 @@ static enum imx23_clk clks_init_on[] __initdata = { int __init mx23_clocks_init(void) { + struct device_node *np; int i; clk_misc_init(); @@ -188,14 +153,14 @@ int __init mx23_clocks_init(void) return PTR_ERR(clks[i]); } + np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl"); + if (np) { + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + } + clk_register_clkdev(clks[clk32k], NULL, "timrot"); - clk_register_clkdev(clks[pwm], NULL, "80064000.pwm"); - clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); - clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); - clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); - clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups)); - clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); - clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); -- cgit v1.2.3-58-ga151 From 44a509fc4794c8a072c83be030579024beb037c9 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 10 Aug 2012 17:17:56 +0800 Subject: ARM: dts: imx6q: improve indentation for fsl,pins Change the indentation for property fsl,pins a little bit, so that the first and the last line get the same indentation with all other lines. Then it will be easier to copy and past any of these lines. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 8 +-- arch/arm/boot/dts/imx6q.dtsi | 114 +++++++++++++++++++--------------- 2 files changed, 68 insertions(+), 54 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 72f30f3e6171..505235fcfd58 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -51,10 +51,10 @@ gpios { pinctrl_gpio_hog: gpiohog { fsl,pins = < - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ - >; + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + >; }; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index a8cd96eed298..e12c27f93795 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -513,86 +513,100 @@ /* shared pinctrl settings */ audmux { pinctrl_audmux_1: audmux-1 { - fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ - 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ - 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ - 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + fsl,pins = < + 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + >; }; }; gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ - 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ - 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ - 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ - 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ - 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ - 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ - 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ - 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ - 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ - 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ - 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ - 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ - 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ - 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ - 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ - 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ - 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ - 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + fsl,pins = < + 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + >; }; }; i2c1 { pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ - 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + fsl,pins = < + 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + >; }; }; serial2 { pinctrl_serial2_1: serial2grp-1 { - fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ - 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */ + fsl,pins = < + 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ + 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ + >; }; }; usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { - fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ - 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ - 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ - 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ - 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + >; }; }; usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { - fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ - 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ - 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ - 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ - 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + >; }; }; ecspi1 { pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + fsl,pins = < + 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + >; }; }; }; -- cgit v1.2.3-58-ga151 From e30ba89fdf3891c3ff32d25a73fbffd37e893572 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 12:33:51 +0800 Subject: ARM: dts: imx6q: name iomuxc sub-nodes following pin function Name iomuxc sub-nodes following pin function and hardware manual. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 2 +- arch/arm/boot/dts/imx6q.dtsi | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 505235fcfd58..dc1933c73067 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -99,7 +99,7 @@ uart2: serial@021e8000 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2_1>; + pinctrl-0 = <&pinctrl_uart2_1>; }; i2c@021a0000 { /* I2C1 */ diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e12c27f93795..d5ced4614016 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -557,8 +557,8 @@ }; }; - serial2 { - pinctrl_serial2_1: serial2grp-1 { + uart2 { + pinctrl_uart2_1: uart2grp-1 { fsl,pins = < 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ -- cgit v1.2.3-58-ga151 From 52ccd4920301b9fecbac577ad4283995730ecf76 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 11:17:42 +0800 Subject: ARM: dts: imx6q: sort iomuxc sub-nodes in name Sort iomuxc sub-nodes in name so that the node can be located a little bit easier. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index d5ced4614016..5612ccf2a563 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -522,6 +522,16 @@ }; }; + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + >; + }; + }; + gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { fsl,pins = < @@ -599,16 +609,6 @@ >; }; }; - - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = < - 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ - >; - }; - }; }; dcic@020e4000 { /* DCIC1 */ -- cgit v1.2.3-58-ga151 From 99d5f0cc17c0c7191e1bb9dc40849a1711a77439 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 10:47:14 +0800 Subject: ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet Add missing pinctrl of usdhc and enet for imx6q-sabrelite board. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 13 ++++++++++- arch/arm/boot/dts/imx6q.dtsi | 44 +++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index dc1933c73067..e34ace784ea3 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -51,8 +51,13 @@ gpios { pinctrl_gpio_hog: gpiohog { fsl,pins = < - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ >; }; @@ -71,12 +76,16 @@ }; ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; vmmc-supply = <®_3p3v>; @@ -84,6 +93,8 @@ }; usdhc@0219c000 { /* uSDHC4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_2>; cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; vmmc-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 5612ccf2a563..9d180220212a 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -532,6 +532,28 @@ }; }; + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ + 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; + }; + }; + gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { fsl,pins = < @@ -591,6 +613,17 @@ 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ >; }; + + pinctrl_usdhc3_2: usdhc3grp-2 { + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + >; + }; }; usdhc4 { @@ -608,6 +641,17 @@ 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ >; }; + + pinctrl_usdhc4_2: usdhc4grp-2 { + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + >; + }; }; }; -- cgit v1.2.3-58-ga151 From 9e3c00665d915c4f5645d43aec5a943b5eee55de Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 12:49:11 +0800 Subject: ARM: dts: imx6q-arm2: add pinctrl for uart and enet Add missing pinctrl of uart and enet for imx6q-arm2 board. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-arm2.dts | 21 +++++++++++++++++++++ arch/arm/boot/dts/imx6q.dtsi | 29 +++++++++++++++++++++++++++++ 2 files changed, 50 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d792581672cc..15df4c105e89 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -28,8 +28,27 @@ status = "disabled"; /* gpmi nand conflicts with SD */ }; + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + >; + }; + }; + }; + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; phy-mode = "rgmii"; status = "okay"; }; @@ -52,6 +71,8 @@ }; uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 9d180220212a..f6c99f722f4c 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -552,6 +552,26 @@ 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ >; }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ + 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; + }; }; gpmi-nand { @@ -598,6 +618,15 @@ }; }; + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ + 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + >; + }; + }; + usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { fsl,pins = < -- cgit v1.2.3-58-ga151 From 497ae1747b8c52fde4ab7e9987326ca43886b652 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 22:06:26 +0800 Subject: ARM: dts: imx6q-sabresd: add pinctrl settings Add pinctrl settings for existing devices in imx6q-sabresd.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabresd.dts | 25 ++++++++++++++++++++++++- arch/arm/boot/dts/imx6q.dtsi | 26 ++++++++++++++++++++++++++ 2 files changed, 50 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 07509a181178..e596c28c214d 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -22,28 +22,51 @@ }; soc { - aips-bus@02000000 { /* AIPS1 */ spba-bus@02000000 { uart1: serial@02020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; + + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; status = "okay"; }; usdhc@02194000 { /* uSDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index f6c99f722f4c..1d07be2530b5 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -609,6 +609,15 @@ }; }; + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ + 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + >; + }; + }; + uart2 { pinctrl_uart2_1: uart2grp-1 { fsl,pins = < @@ -627,6 +636,23 @@ }; }; + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ + 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ + 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ + 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ + 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ + 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ + 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ + 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ + 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ + 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + >; + }; + }; + usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { fsl,pins = < -- cgit v1.2.3-58-ga151 From d9d253a498a60043b5f63ff7b4060ef6553f24d9 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sat, 11 Aug 2012 22:33:48 +0800 Subject: ARM: imx6q: remove dummy pinctrl state As all imx6q boards have pinctrl set up in device tree, it's time to remove the dummy pinctrl state. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 7a9599fcbf82..263bc9148183 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include @@ -159,12 +158,6 @@ static void __init imx6q_usb_init(void) static void __init imx6q_init_machine(void) { - /* - * This should be removed when all imx6q boards have pinctrl - * states for devices defined in device tree. - */ - pinctrl_provide_dummies(); - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) imx6q_sabrelite_init(); -- cgit v1.2.3-58-ga151 From 5be03a7bdb0f7411465eb90b3b670e99e1aefbe5 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 20:02:10 +0800 Subject: ARM: dts: imx53-qsb: add pinctrl settings Add pinctrl settings for existing devices in imx53-qsb.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsb.dts | 34 +++++++++++++++- arch/arm/boot/dts/imx53.dtsi | 90 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 122 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index a0e816f2182b..08948af86d1a 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -25,6 +25,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; status = "okay"; }; @@ -35,6 +37,8 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; @@ -42,17 +46,37 @@ }; iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-qsb"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ + 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -64,6 +88,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -150,10 +176,14 @@ }; audmux@63fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 776ce410d057..01fa49abab6d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -216,6 +216,96 @@ status = "disabled"; }; + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc"; + reg = <0x53fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ + 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ + 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ + 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ + 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ + 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ + 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ + 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ + 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ + 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ + 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ + 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ + 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; + }; + + esdhc3 { + pinctrl_esdhc3_1: esdhc3grp-1 { + fsl,pins = < + 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ + 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ + 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ + 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ + 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ + 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ + 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ + 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ + 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ + 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ + 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ + 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ + 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ + >; + }; + }; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; -- cgit v1.2.3-58-ga151 From 4bb6143cbee3c66c23a3f259b5e479608bed0831 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 2 Aug 2012 22:48:39 +0800 Subject: ARM: dts: imx53-ard: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-ard.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-ard.dts | 49 +++++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx53.dtsi | 22 ++++++++++++++++++ 2 files changed, 69 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e6a189096017..4be76f223526 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -25,6 +25,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; cd-gpios = <&gpio1 1 0>; wp-gpios = <&gpio1 9 0>; status = "okay"; @@ -32,11 +34,54 @@ }; iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-ard"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ + 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ + 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ + 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ + 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ + 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ + 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ + 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ + 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ + 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ + 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ + 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ + 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ + 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ + 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ + 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ + 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ + 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ + 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ + 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ + 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ + 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ + 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ + 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ + 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ + 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ + 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ + 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ + 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ + 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ + 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ + 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ + 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ + 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 01fa49abab6d..20b67bc5f70b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -259,6 +259,21 @@ 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ >; }; + + pinctrl_esdhc1_2: esdhc1grp-2 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ + 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ + 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ + 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; }; esdhc3 { @@ -303,6 +318,13 @@ 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ >; }; + + pinctrl_uart1_2: uart1grp-2 { + fsl,pins = < + 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ + 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ + >; + }; }; }; -- cgit v1.2.3-58-ga151 From 327a79c01e45e269da33af1500cd7da8a24c3ba4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 21:47:36 +0800 Subject: ARM: dts: imx53-evk: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-evk.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-evk.dts | 31 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx53.dtsi | 10 ++++++++++ 2 files changed, 39 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 86aebc5b4091..a124d1e25258 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -25,12 +25,16 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio3 14 0>; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -56,6 +60,8 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; @@ -63,17 +69,36 @@ }; iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-evk"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; pmic: mc13892@08 { @@ -88,6 +113,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 20b67bc5f70b..c08bec5a8400 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -248,6 +248,16 @@ }; }; + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ + 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ + 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ + >; + }; + }; + esdhc1 { pinctrl_esdhc1_1: esdhc1grp-1 { fsl,pins = < -- cgit v1.2.3-58-ga151 From 072480426ba9b5a0d68d91006fdb07fd568ef6ad Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 22:22:33 +0800 Subject: ARM: dts: imx53-smd: add pinctrl settings Add pinctrl settings for the exsiting devices in imx53-smd.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-smd.dts | 38 ++++++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx53.dtsi | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 8cdf0a2b0ff3..06c68580c842 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -25,22 +25,30 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio4 11 0>; status = "okay"; }; esdhc@50008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; non-removable; status = "okay"; }; uart3: serial@5000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -72,27 +80,49 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; non-removable; status = "okay"; }; }; iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-smd"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; uart2: serial@53fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; codec: sgtl5000@0a { @@ -112,6 +142,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -131,6 +163,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index c08bec5a8400..221cf3321b0a 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -286,6 +286,19 @@ }; }; + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ + 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ + 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ + 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ + 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ + 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ + >; + }; + }; + esdhc3 { pinctrl_esdhc3_1: esdhc3grp-1 { fsl,pins = < @@ -336,6 +349,26 @@ >; }; }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ + 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ + 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ + 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ + >; + }; + }; }; uart1: serial@53fbc000 { -- cgit v1.2.3-58-ga151 From 1a60a4de8be4f8cf17f5d36c2642153b9a95184a Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 22:33:43 +0800 Subject: ARM: imx53: build in pinctrl support As all imx53 boards booting from device tree have pinctrl set up in dts, it's time to remove the dummy pinctrl state and build in the real imx53 pinctrl support. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 2 ++ arch/arm/mach-imx/imx53-dt.c | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e4aa08217260..1afdc67a5f22 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -108,6 +108,8 @@ config SOC_IMX53 select ARCH_MX5 select ARCH_MX53 select HAVE_CAN_FLEXCAN if CAN + select PINCTRL + select PINCTRL_IMX53 if ARCH_IMX_V4_V5 diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index d193d8f1334f..21fcbd0e3081 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -78,8 +77,6 @@ static void __init imx53_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - pinctrl_provide_dummies(); - node = of_find_matching_node(NULL, imx53_iomuxc_of_match); if (node) { of_id = of_match_node(imx53_iomuxc_of_match, node); -- cgit v1.2.3-58-ga151 From 721a44145aa789b9d2ee7927afa28c2d60ffa036 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 22:43:22 +0800 Subject: ARM: imx53: decouple device tree boot from board files Now, imx53 device tree kernel calls pinctrl to set up pins. The functions used to hook up non-DT pin setup is not needed for DT boot any more. Remove them from DT image. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/imx53-dt.c | 20 -------------------- arch/arm/plat-mxc/include/mach/common.h | 4 ---- 2 files changed, 24 deletions(-) diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 21fcbd0e3081..29711e95579f 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -50,14 +50,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, - { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, - { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, }, - { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, }, - { /* sentinel */ } -}; - static void __init imx53_qsb_init(void) { struct clk *clk; @@ -73,18 +65,6 @@ static void __init imx53_qsb_init(void) static void __init imx53_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - node = of_find_matching_node(NULL, imx53_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx53_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 7128e9710417..96fa702dc783 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -138,10 +138,6 @@ extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); extern void imx51_babbage_common_init(void); -extern void imx53_ard_common_init(void); -extern void imx53_evk_common_init(void); -extern void imx53_qsb_common_init(void); -extern void imx53_smd_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); -- cgit v1.2.3-58-ga151 From 442279da12c6e3eada16d604b866226b77876c30 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 23:21:39 +0800 Subject: ARM: imx53: support device tree boot only With device tree kernel provides the equal support as those imx53 board files, it's time to remove the board files and get imx53 support device tree only. Signed-off-by: Shawn Guo --- arch/arm/configs/imx_v6_v7_defconfig | 2 +- arch/arm/mach-imx/Kconfig | 79 ++------- arch/arm/mach-imx/Makefile | 6 +- arch/arm/mach-imx/Makefile.boot | 8 +- arch/arm/mach-imx/imx53-dt.c | 99 ----------- arch/arm/mach-imx/mach-imx53.c | 99 +++++++++++ arch/arm/mach-imx/mach-mx53_ard.c | 272 ----------------------------- arch/arm/mach-imx/mach-mx53_evk.c | 179 ------------------- arch/arm/mach-imx/mach-mx53_loco.c | 321 ----------------------------------- arch/arm/mach-imx/mach-mx53_smd.c | 168 ------------------ 10 files changed, 117 insertions(+), 1116 deletions(-) delete mode 100644 arch/arm/mach-imx/imx53-dt.c create mode 100644 arch/arm/mach-imx/mach-imx53.c delete mode 100644 arch/arm/mach-imx/mach-mx53_ard.c delete mode 100644 arch/arm/mach-imx/mach-mx53_evk.c delete mode 100644 arch/arm/mach-imx/mach-mx53_loco.c delete mode 100644 arch/arm/mach-imx/mach-mx53_smd.c diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 400ef342d13e..565132d02105 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -32,7 +32,7 @@ CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51SD=y -CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_SMP=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 1afdc67a5f22..374fcc256d43 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -102,15 +102,6 @@ config SOC_IMX51 select ARCH_MX5 select ARCH_MX51 -config SOC_IMX53 - bool - select SOC_IMX5 - select ARCH_MX5 - select ARCH_MX53 - select HAVE_CAN_FLEXCAN if CAN - select PINCTRL - select PINCTRL_IMX53 - if ARCH_IMX_V4_V5 comment "MX1 platforms:" @@ -738,69 +729,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. +comment "Device tree only" -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. +config SOC_IMX53 + bool "i.MX53 support" + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN + select PINCTRL + select PINCTRL_IMX53 -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -comment "i.MX6 family:" + This enables support for Freescale i.MX53 processor. config SOC_IMX6Q bool "i.MX6 Quad support" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 88b756c4082b..58dc7c67d606 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -83,13 +83,9 @@ endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o +obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 05541cf4a878..c60967629e27 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -39,8 +39,12 @@ params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb -dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ - imx53-qsb.dtb imx53-smd.dtb + +dtb-$(CONFIG_SOC_IMX53) += imx53-ard.dtb \ + imx53-evk.dtb \ + imx53-qsb.dtb \ + imx53-smd.dtb \ + dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c deleted file mode 100644 index 29711e95579f..000000000000 --- a/arch/arm/mach-imx/imx53-dt.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Lookup table for attaching a specific name and platform_data pointer to - * devices as they get created by of_platform_populate(). Ideally this table - * would not exist, but the current clock implementation depends on some devices - * having a specific name. - */ -static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL), - OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL), - OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL), - OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL), - OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), - { /* sentinel */ } -}; - -static void __init imx53_qsb_init(void) -{ - struct clk *clk; - - clk = clk_get_sys(NULL, "ssi_ext1"); - if (IS_ERR(clk)) { - pr_err("failed to get clk ssi_ext1\n"); - return; - } - - clk_register_clkdev(clk, NULL, "0-000a"); -} - -static void __init imx53_dt_init(void) -{ - if (of_machine_is_compatible("fsl,imx53-qsb")) - imx53_qsb_init(); - - of_platform_populate(NULL, of_default_bus_match_table, - imx53_auxdata_lookup, NULL); -} - -static void __init imx53_timer_init(void) -{ - mx53_clocks_init_dt(); -} - -static struct sys_timer imx53_timer = { - .init = imx53_timer_init, -}; - -static const char *imx53_dt_board_compat[] __initdata = { - "fsl,imx53", - NULL -}; - -DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &imx53_timer, - .init_machine = imx53_dt_init, - .init_late = imx53_init_late, - .dt_compat = imx53_dt_board_compat, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c new file mode 100644 index 000000000000..29711e95579f --- /dev/null +++ b/arch/arm/mach-imx/mach-imx53.c @@ -0,0 +1,99 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Lookup table for attaching a specific name and platform_data pointer to + * devices as they get created by of_platform_populate(). Ideally this table + * would not exist, but the current clock implementation depends on some devices + * having a specific name. + */ +static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL), + OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL), + OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL), + OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL), + OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL), + OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), + OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL), + OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL), + OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), + { /* sentinel */ } +}; + +static void __init imx53_qsb_init(void) +{ + struct clk *clk; + + clk = clk_get_sys(NULL, "ssi_ext1"); + if (IS_ERR(clk)) { + pr_err("failed to get clk ssi_ext1\n"); + return; + } + + clk_register_clkdev(clk, NULL, "0-000a"); +} + +static void __init imx53_dt_init(void) +{ + if (of_machine_is_compatible("fsl,imx53-qsb")) + imx53_qsb_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + imx53_auxdata_lookup, NULL); +} + +static void __init imx53_timer_init(void) +{ + mx53_clocks_init_dt(); +} + +static struct sys_timer imx53_timer = { + .init = imx53_timer_init, +}; + +static const char *imx53_dt_board_compat[] __initdata = { + "fsl,imx53", + NULL +}; + +DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") + .map_io = mx53_map_io, + .init_early = imx53_init_early, + .init_irq = mx53_init_irq, + .handle_irq = imx53_handle_irq, + .timer = &imx53_timer, + .init_machine = imx53_dt_init, + .init_late = imx53_init_late, + .dt_compat = imx53_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c deleted file mode 100644 index 6c28e65f424d..000000000000 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) -#define ARD_SD1_CD IMX_GPIO_NR(1, 1) -#define ARD_SD1_WP IMX_GPIO_NR(1, 9) -#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) -#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) -#define ARD_HOME IMX_GPIO_NR(5, 10) -#define ARD_BACK IMX_GPIO_NR(5, 11) -#define ARD_PROG IMX_GPIO_NR(5, 12) -#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) - -static iomux_v3_cfg_t mx53_ard_pads[] = { - /* UART1 */ - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, - /* WEIM for CS1 */ - MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ - MX53_PAD_EIM_D16__EMI_WEIM_D_16, - MX53_PAD_EIM_D17__EMI_WEIM_D_17, - MX53_PAD_EIM_D18__EMI_WEIM_D_18, - MX53_PAD_EIM_D19__EMI_WEIM_D_19, - MX53_PAD_EIM_D20__EMI_WEIM_D_20, - MX53_PAD_EIM_D21__EMI_WEIM_D_21, - MX53_PAD_EIM_D22__EMI_WEIM_D_22, - MX53_PAD_EIM_D23__EMI_WEIM_D_23, - MX53_PAD_EIM_D24__EMI_WEIM_D_24, - MX53_PAD_EIM_D25__EMI_WEIM_D_25, - MX53_PAD_EIM_D26__EMI_WEIM_D_26, - MX53_PAD_EIM_D27__EMI_WEIM_D_27, - MX53_PAD_EIM_D28__EMI_WEIM_D_28, - MX53_PAD_EIM_D29__EMI_WEIM_D_29, - MX53_PAD_EIM_D30__EMI_WEIM_D_30, - MX53_PAD_EIM_D31__EMI_WEIM_D_31, - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, - MX53_PAD_EIM_OE__EMI_WEIM_OE, - MX53_PAD_EIM_RW__EMI_WEIM_RW, - MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, - /* SDHC1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - MX53_PAD_PATA_DATA8__ESDHC1_DAT4, - MX53_PAD_PATA_DATA9__ESDHC1_DAT5, - MX53_PAD_PATA_DATA10__ESDHC1_DAT6, - MX53_PAD_PATA_DATA11__ESDHC1_DAT7, - MX53_PAD_GPIO_1__GPIO1_1, - MX53_PAD_GPIO_9__GPIO1_9, - /* I2C2 */ - MX53_PAD_EIM_EB2__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* I2C3 */ - MX53_PAD_GPIO_3__I2C3_SCL, - MX53_PAD_GPIO_16__I2C3_SDA, - /* GPIO */ - MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ - MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ - MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ - MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ - MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button ard_buttons[] = { - GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), - GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), - GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), - GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data ard_button_data __initconst = { - .buttons = ard_buttons, - .nbuttons = ARRAY_SIZE(ard_buttons), -}; - -static struct resource ard_smsc911x_resources[] = { - { - .start = MX53_CS1_64MB_BASE_ADDR, - .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct smsc911x_platform_config ard_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, -}; - -static struct platform_device ard_smsc_lan9220_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ard_smsc911x_resources), - .resource = ard_smsc911x_resources, - .dev = { - .platform_data = &ard_smsc911x_config, - }, -}; - -static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { - .cd_gpio = ARD_SD1_CD, - .wp_gpio = ARD_SD1_WP, -}; - -static struct imxi2c_platform_data mx53_ard_i2c2_data = { - .bitrate = 50000, -}; - -static struct imxi2c_platform_data mx53_ard_i2c3_data = { - .bitrate = 400000, -}; - -static void __init mx53_ard_io_init(void) -{ - gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); - gpio_direction_input(ARD_ETHERNET_INT_B); - - gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); - gpio_direction_output(ARD_I2CPORTEXP_B, 1); -} - -/* Config CS1 settings for ethernet controller */ -static int weim_cs_config(void) -{ - u32 reg; - void __iomem *weim_base, *iomuxc_base; - - weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); - if (!weim_base) - return -ENOMEM; - - iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) { - iounmap(weim_base); - return -ENOMEM; - } - - /* CS1 timings for LAN9220 */ - writel(0x20001, (weim_base + 0x18)); - writel(0x0, (weim_base + 0x1C)); - writel(0x16000202, (weim_base + 0x20)); - writel(0x00000002, (weim_base + 0x24)); - writel(0x16002082, (weim_base + 0x28)); - writel(0x00000000, (weim_base + 0x2C)); - writel(0x00000000, (weim_base + 0x90)); - - /* specify 64 MB on CS1 and CS0 on GPR1 */ - reg = readl(iomuxc_base + 0x4); - reg &= ~0x3F; - reg |= 0x1B; - writel(reg, (iomuxc_base + 0x4)); - - iounmap(iomuxc_base); - iounmap(weim_base); - - return 0; -} - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -void __init imx53_ard_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, - ARRAY_SIZE(mx53_ard_pads)); - weim_cs_config(); -} - -static struct platform_device *devices[] __initdata = { - &ard_smsc_lan9220_device, -}; - -static void __init mx53_ard_board_init(void) -{ - imx53_soc_init(); - imx53_add_imx_uart(0, NULL); - - imx53_ard_common_init(); - mx53_ard_io_init(); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B); - ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); - imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); - imx_add_gpio_keys(&ard_button_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_ard_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_ard_timer = { - .init = mx53_ard_timer_init, -}; - -MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_ard_timer, - .init_machine = mx53_ard_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c deleted file mode 100644 index 09fe2197b491..000000000000 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2010 Yong Shen. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) -#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) -#define MX53EVK_LED IMX_GPIO_NR(7, 7) - -#include "devices-imx53.h" - -static iomux_v3_cfg_t mx53_evk_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - MX53_PAD_PATA_DIOR__UART2_RTS, - MX53_PAD_PATA_INTRQ__UART2_CTS, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - - MX53_PAD_EIM_D16__ECSPI1_SCLK, - MX53_PAD_EIM_D17__ECSPI1_MISO, - MX53_PAD_EIM_D18__ECSPI1_MOSI, - - /* ecspi chip select lines */ - MX53_PAD_EIM_EB2__GPIO2_30, - MX53_PAD_EIM_D19__GPIO3_19, - /* LED */ - MX53_PAD_PATA_DA_1__GPIO7_7, -}; - -static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct gpio_led mx53evk_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = MX53EVK_LED, - }, -}; - -static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { - .leds = mx53evk_leds, - .num_leds = ARRAY_SIZE(mx53evk_leds), -}; - -static inline void mx53_evk_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, &mx53_evk_uart_pdata); - imx53_add_imx_uart(2, NULL); -} - -static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_evk_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, - "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static struct spi_board_info mx53_evk_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx53_evk_spi_cs[] = { - EVK_ECSPI1_CS0, - EVK_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx53_evk_spi_data __initconst = { - .chipselect = mx53_evk_spi_cs, - .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs), -}; - -void __init imx53_evk_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, - ARRAY_SIZE(mx53_evk_pads)); -} - -static void __init mx53_evk_board_init(void) -{ - imx53_soc_init(); - imx53_evk_common_init(); - - mx53_evk_init_uart(); - mx53_evk_fec_reset(); - imx53_add_fec(&mx53_evk_fec_pdata); - - imx53_add_imx_i2c(0, &mx53_evk_i2c_data); - imx53_add_imx_i2c(1, &mx53_evk_i2c_data); - - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - - spi_register_board_info(mx53_evk_spi_board_info, - ARRAY_SIZE(mx53_evk_spi_board_info)); - imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0); - gpio_led_register_device(-1, &mx53evk_leds_data); -} - -static void __init mx53_evk_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_evk_timer = { - .init = mx53_evk_timer_init, -}; - -MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_evk_timer, - .init_machine = mx53_evk_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c deleted file mode 100644 index 8abe23c1d3c8..000000000000 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) -#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) -#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) -#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define LOCO_LED IMX_GPIO_NR(7, 7) -#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) -#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) -#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) -#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14) - -static iomux_v3_cfg_t mx53_loco_pads[] = { - /* FEC */ - MX53_PAD_FEC_MDC__FEC_MDC, - MX53_PAD_FEC_MDIO__FEC_MDIO, - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - MX53_PAD_FEC_RX_ER__FEC_RX_ER, - MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - MX53_PAD_FEC_RXD1__FEC_RDATA_1, - MX53_PAD_FEC_RXD0__FEC_RDATA_0, - MX53_PAD_FEC_TX_EN__FEC_TX_EN, - MX53_PAD_FEC_TXD1__FEC_TDATA_1, - MX53_PAD_FEC_TXD0__FEC_TDATA_0, - /* FEC_nRST */ - MX53_PAD_PATA_DA_0__GPIO7_6, - /* FEC_nINT */ - MX53_PAD_PATA_DATA4__GPIO2_4, - /* AUDMUX5 */ - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC, - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */ - /* I2C2 */ - MX53_PAD_KEY_COL3__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD1_CD */ - MX53_PAD_EIM_DA13__GPIO3_13, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, - /* SD3_CD */ - MX53_PAD_EIM_DA11__GPIO3_11, - /* SD3_WP */ - MX53_PAD_EIM_DA12__GPIO3_12, - /* VGA */ - MX53_PAD_EIM_OE__IPU_DI1_PIN7, - MX53_PAD_EIM_RW__IPU_DI1_PIN8, - /* DISPLB */ - MX53_PAD_EIM_D20__IPU_SER_DISP0_CS, - MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK, - MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN, - MX53_PAD_EIM_D23__IPU_DI0_D0_CS, - /* DISP0_POWER_EN */ - MX53_PAD_EIM_D24__GPIO3_24, - /* DISP0 DET INT */ - MX53_PAD_EIM_D31__GPIO3_31, - /* LVDS */ - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3, - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2, - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK, - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1, - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* UART1 */ - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - /* CSI0 */ - MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12, - MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13, - MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14, - MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15, - MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16, - MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17, - MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18, - MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19, - MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC, - MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC, - MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK, - /* DISPLAY */ - MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, - MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, - MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, - MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, - MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, - MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, - MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, - MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, - MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, - MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, - MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, - MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, - MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, - MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, - MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, - MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, - MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, - MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, - MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, - MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, - MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, - MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, - MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, - MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, - MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, - MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, - MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, - MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, - /* Audio CLK*/ - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK, - /* PWM */ - MX53_PAD_GPIO_1__PWM2_PWMO, - /* SPDIF */ - MX53_PAD_GPIO_7__SPDIF_PLOCK, - MX53_PAD_GPIO_17__SPDIF_OUT1, - /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ - MX53_PAD_PATA_DA_2__GPIO7_8, - MX53_PAD_PATA_DATA5__GPIO2_5, - MX53_PAD_PATA_DATA6__GPIO2_6, - MX53_PAD_PATA_DATA14__GPIO2_14, - MX53_PAD_PATA_DATA15__GPIO2_15, - MX53_PAD_PATA_INTRQ__GPIO7_2, - MX53_PAD_EIM_WAIT__GPIO5_0, - MX53_PAD_NANDF_WP_B__GPIO6_9, - MX53_PAD_NANDF_RB0__GPIO6_10, - MX53_PAD_NANDF_CS1__GPIO6_14, - MX53_PAD_NANDF_CS2__GPIO6_15, - MX53_PAD_NANDF_CS3__GPIO6_16, - MX53_PAD_GPIO_5__GPIO1_5, - MX53_PAD_GPIO_16__GPIO7_11, - MX53_PAD_GPIO_8__GPIO1_8, -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button loco_buttons[] = { - GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), - GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data loco_button_data __initconst = { - .buttons = loco_buttons, - .nbuttons = ARRAY_SIZE(loco_buttons), -}; - -static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { - .cd_gpio = LOCO_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { - .cd_gpio = LOCO_SD3_CD, - .wp_gpio = LOCO_SD3_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -static inline void mx53_loco_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(LOCO_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(LOCO_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_loco_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct gpio_led mx53loco_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = LOCO_LED, - }, -}; - -static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { - .leds = mx53loco_leds, - .num_leds = ARRAY_SIZE(mx53loco_leds), -}; - -void __init imx53_qsb_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, - ARRAY_SIZE(mx53_loco_pads)); -} - -static struct i2c_board_info mx53loco_i2c_devices[] = { - { - I2C_BOARD_INFO("mma8450", 0x1C), - }, -}; - -static void __init mx53_loco_board_init(void) -{ - int ret; - imx53_soc_init(); - imx53_qsb_common_init(); - - imx53_add_imx_uart(0, NULL); - mx53_loco_fec_reset(); - imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0); - - ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); - if (ret) - pr_err("Cannot request ACCEL_EN pin: %d\n", ret); - - i2c_register_board_info(0, mx53loco_i2c_devices, - ARRAY_SIZE(mx53loco_i2c_devices)); - imx53_add_imx_i2c(0, &mx53_loco_i2c_data); - imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); - imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); - imx_add_gpio_keys(&loco_button_data); - gpio_led_register_device(-1, &mx53loco_leds_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_loco_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 0, 0); -} - -static struct sys_timer mx53_loco_timer = { - .init = mx53_loco_timer_init, -}; - -MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_loco_timer, - .init_machine = mx53_loco_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c deleted file mode 100644 index b15d6a6d3b68..000000000000 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3) - -static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_DA_2__UART3_RTS, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD2 */ - MX53_PAD_SD2_CMD__ESDHC2_CMD, - MX53_PAD_SD2_CLK__ESDHC2_CLK, - MX53_PAD_SD2_DATA0__ESDHC2_DAT0, - MX53_PAD_SD2_DATA1__ESDHC2_DAT1, - MX53_PAD_SD2_DATA2__ESDHC2_DAT2, - MX53_PAD_SD2_DATA3__ESDHC2_DAT3, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, -}; - -static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mx53_smd_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, NULL); - imx53_add_imx_uart(2, &mx53_smd_uart_data); -} - -static inline void mx53_smd_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_smd_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_smd_ahci_pwr_on(void) -{ - int ret; - - /* Enable SATA PWR */ - ret = gpio_request_one(MX53_SMD_SATA_PWR_EN, - GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr"); - if (ret) { - pr_err("failed to enable SATA_PWR_EN: %d\n", ret); - return; - } -} - -void __init imx53_smd_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, - ARRAY_SIZE(mx53_smd_pads)); -} - -static void __init mx53_smd_board_init(void) -{ - imx53_soc_init(); - imx53_smd_common_init(); - - mx53_smd_init_uart(); - mx53_smd_fec_reset(); - imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(0, &mx53_smd_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); - mx53_smd_ahci_pwr_on(); - imx53_add_ahci_imx(); -} - -static void __init mx53_smd_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_smd_timer = { - .init = mx53_smd_timer_init, -}; - -MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_smd_timer, - .init_machine = mx53_smd_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END -- cgit v1.2.3-58-ga151 From 0f9d4504a50bd29954f21a6184ca680103595c53 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 12 Aug 2012 23:43:31 +0800 Subject: ARM: imx53: remove unneeded files and functions Now imx53 is a device tree only platform, so the files and functions used only by non-DT kernel can be removed. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/devices-imx53.h | 48 -- arch/arm/mach-imx/mm-imx5.c | 47 -- arch/arm/plat-mxc/include/mach/common.h | 1 - arch/arm/plat-mxc/include/mach/iomux-mx53.h | 1219 --------------------------- 4 files changed, 1315 deletions(-) delete mode 100644 arch/arm/mach-imx/devices-imx53.h delete mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx53.h diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h deleted file mode 100644 index 77e0db96c448..000000000000 --- a/arch/arm/mach-imx/devices-imx53.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2010 Yong Shen. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include - -extern const struct imx_fec_data imx53_fec_data; -#define imx53_add_fec(pdata) \ - imx_add_fec(&imx53_fec_data, pdata) - -extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[]; -#define imx53_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata) - - -extern const struct imx_imx_i2c_data imx53_imx_i2c_data[]; -#define imx53_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[]; -#define imx53_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx53_ecspi_data[]; -#define imx53_add_ecspi(id, pdata) \ - imx_add_spi_imx(&imx53_ecspi_data[id], pdata) - -extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id) \ - imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) - -extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; -#define imx53_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) - -extern const struct imx_imx_keypad_data imx53_imx_keypad_data; -#define imx53_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) - -extern const struct imx_pata_imx_data imx53_pata_imx_data; -#define imx53_add_pata_imx() \ - imx_add_pata_imx(&imx53_pata_imx_data) - -extern struct platform_device *__init imx53_add_ahci_imx(void); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 52d8f534be10..acb0aadb4255 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -128,25 +128,6 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = { .script_addrs = &imx51_sdma_script, }; -static struct sdma_script_start_addrs imx53_sdma_script __initdata = { - .ap_2_ap_addr = 642, - .app_2_mcu_addr = 683, - .mcu_2_app_addr = 747, - .uart_2_mcu_addr = 817, - .shp_2_mcu_addr = 891, - .mcu_2_shp_addr = 960, - .uartsh_2_mcu_addr = 1032, - .spdif_2_mcu_addr = 1100, - .mcu_2_spdif_addr = 1134, - .firi_2_mcu_addr = 1193, - .mcu_2_firi_addr = 1290, -}; - -static struct sdma_platform_data imx53_sdma_pdata __initdata = { - .fw_name = "sdma-imx53.bin", - .script_addrs = &imx53_sdma_script, -}; - static const struct resource imx50_audmux_res[] __initconst = { DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), }; @@ -155,10 +136,6 @@ static const struct resource imx51_audmux_res[] __initconst = { DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), }; -static const struct resource imx53_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), -}; - void __init imx50_soc_init(void) { /* i.mx50 has the i.mx35 type gpio */ @@ -196,30 +173,6 @@ void __init imx51_soc_init(void) ARRAY_SIZE(imx51_audmux_res)); } -void __init imx53_soc_init(void) -{ - /* i.mx53 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); - mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); - mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); - mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); - mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); - mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); - mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); - - pinctrl_provide_dummies(); - /* i.mx53 has the i.mx35 type sdma */ - imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); - - /* Setup AIPS registers */ - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR)); - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR)); - - /* i.mx53 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, - ARRAY_SIZE(imx53_audmux_res)); -} - void __init imx51_init_late(void) { mx51_neon_fixup(); diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 96fa702dc783..0932fc6e2223 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -52,7 +52,6 @@ extern void imx31_soc_init(void); extern void imx35_soc_init(void); extern void imx50_soc_init(void); extern void imx51_soc_init(void); -extern void imx53_soc_init(void); extern void imx51_init_late(void); extern void imx53_init_late(void); extern void epit_timer_init(void __iomem *base, int irq); diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h deleted file mode 100644 index 9761e003bde2..000000000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ /dev/null @@ -1,1219 +0,0 @@ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc.. - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_IOMUX_MX53_H__ -#define __MACH_IOMUX_MX53_H__ - -#include - -/* These 2 defines are for pins that may not have a mux register, but could - * have a pad setting register, and vice-versa. */ -#define __NA_ 0x00 - -#define MX53_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ - PAD_CTL_SRE_FAST) - - -#define MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__CCM_CLKO IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__SPDIF_OUT1 IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__KPP_ROW_0 IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__GPIO4_7 IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__ECSPI1_MOSI IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW0__FEC_TX_ER IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__KPP_ROW_1 IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__GPIO4_9 IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__ECSPI1_SS0 IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__FEC_COL IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__KPP_COL_2 IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__GPIO4_10 IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__CAN1_TXCAN IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__FEC_MDIO IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__ECSPI1_SS1 IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__FEC_RDATA_2 IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__KPP_ROW_2 IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__GPIO4_11 IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__CAN1_RXCAN IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__FEC_MDC IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__ECSPI1_SS2 IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__FEC_TDATA_2 IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW2__USBPHY1_RXERROR IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__KPP_COL_3 IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__GPIO4_12 IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__USBOH3_H2_DP IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__SPDIF_IN1 IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__I2C2_SCL IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__ECSPI1_SS3 IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__FEC_CRS IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__KPP_ROW_3 IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__GPIO4_13 IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__I2C2_SDA IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__KPP_COL_4 IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__GPIO4_14 IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__CAN2_TXCAN IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__IPU_SISG_4 IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__UART5_RTS IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__KPP_ROW_4 IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__GPIO4_16 IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__GPIO4_17 IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN15__USBPHY1_BVALID IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__GPIO4_18 IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__GPIO4_19 IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN3__USBPHY1_IDDIG IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__GPIO4_20 IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__ESDHC1_WP IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__GPIO4_21 IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__CSPI_SCLK IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__GPIO4_22 IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__CSPI_MOSI IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL \ - IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__GPIO4_23 IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__CSPI_MISO IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__GPIO4_24 IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__CSPI_SS0 IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__GPIO4_25 IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__CSPI_SS1 IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__GPIO4_26 IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__CSPI_SS2 IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__GPIO4_27 IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__CSPI_SS3 IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__GPIO4_28 IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__CSPI_RDY IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__GPIO4_29 IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__PWM1_PWMO IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT8__USBPHY2_AVALID IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__GPIO4_30 IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__PWM2_PWMO IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__GPIO4_31 IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 \ - IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__GPIO5_5 IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 \ - IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__GPIO5_6 IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 \ - IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__GPIO5_7 IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 \ - IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__GPIO5_8 IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 \ - IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__GPIO5_9 IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__ECSPI1_SS1 IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__ECSPI2_SS1 IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 \ - IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__GPIO5_10 IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__ECSPI2_MOSI IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 \ - IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__GPIO5_11 IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__ECSPI2_MISO IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 \ - IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__GPIO5_12 IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__ECSPI2_SS0 IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 \ - IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__GPIO5_13 IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__ECSPI2_SCLK IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 \ - IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__GPIO5_14 IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__ECSPI1_SCLK IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 \ - IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT20__SATA_PHY_TDI IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__GPIO5_15 IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__ECSPI1_MOSI IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT21__SATA_PHY_TDO IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__GPIO5_16 IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__ECSPI1_MISO IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT22__SATA_PHY_TCK IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__GPIO5_17 IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__ECSPI1_SS0 IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_DISP0_DAT23__SATA_PHY_TMS IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__GPIO5_18 IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__GPIO5_19 IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_MCLK__TPIU_TRCTL IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__GPIO5_20 IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__GPIO5_21 IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__GPIO5_22 IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__KPP_COL_5 IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__ECSPI1_SCLK IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__GPIO5_23 IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__KPP_ROW_5 IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__ECSPI1_MOSI IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__GPIO5_24 IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__KPP_COL_6 IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__ECSPI1_MISO IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__GPIO5_25 IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__KPP_ROW_6 IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__ECSPI1_SS0 IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__GPIO5_26 IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__KPP_COL_7 IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__GPIO5_27 IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__GPIO5_29 IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__UART1_RXD_MUX IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__ECSPI2_SS0 IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__GPIO5_31 IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__GPIO6_1 IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__GPIO6_2 IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__UART4_RTS IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__GPIO6_4 IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__UART5_RTS IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__EMI_WEIM_A_25 IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__GPIO5_2 IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__ECSPI2_RDY IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__IPU_DI1_PIN12 IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__CSPI_SS1 IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__IPU_DI0_D1_CS IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A25__USBPHY1_BISTOK IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__GPIO2_30 IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__ECSPI1_SS0 IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB2__I2C2_SCL IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__GPIO3_16 IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__IPU_DI0_PIN8 IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__IPU_DI0_PIN16 IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__CSPI_SS0 IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__EPIT2_EPITO IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D20__UART1_RTS IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__EMI_WEIM_D_21 IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__GPIO3_21 IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__IPU_DI0_PIN1 IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__CSPI_MISO IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D23__IPU_DI1_PIN14 IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__GPIO2_31 IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__UART3_RTS IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_EB3__UART1_RI IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__ECSPI2_SS2 IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D24__UART1_DTR IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__EMI_WEIM_D_25 IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__GPIO3_25 IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__UART3_RXD_MUX IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D25__ECSPI1_SS3 IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__CSPI_SS3 IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__ECSPI2_SS3 IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__IPU_SISG_2 IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__EMI_WEIM_D_27 IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__GPIO3_27 IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__UART2_RXD_MUX IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D27__FIRI_TXD IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__IPU_CSI0_D_0 IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__IPU_DI1_PIN13 IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__IPU_SISG_3 IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__GPIO3_29 IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__UART2_RTS IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__CSPI_SS0 IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__IPU_DI1_PIN15 IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__IPU_CSI1_VSYNC IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__USBOH3_USBH1_OC IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D30__USBOH3_USBH2_OC IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__EMI_WEIM_D_31 IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__GPIO3_31 IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__UART3_RTS IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_EIM_D31__IPU_CSI0_D_2 IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__IPU_DI0_PIN12 IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__USBOH3_USBH1_PWR IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_D31__USBOH3_USBH2_PWR IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__EMI_WEIM_A_24 IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__GPIO5_4 IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__IPU_CSI1_D_19 IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__IPU_SISG_2 IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A24__USBPHY2_BVALID IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__EMI_WEIM_A_23 IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__GPIO6_6 IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__IPU_CSI1_D_18 IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__IPU_SISG_3 IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A23__USBPHY2_ENDSESSION IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__EMI_WEIM_A_22 IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__GPIO2_16 IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__IPU_CSI1_D_17 IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A22__SRC_BT_CFG1_7 IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__EMI_WEIM_A_21 IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__GPIO2_17 IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__IPU_CSI1_D_16 IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A21__SRC_BT_CFG1_6 IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__EMI_WEIM_A_20 IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__GPIO2_18 IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__IPU_CSI1_D_15 IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A20__SRC_BT_CFG1_5 IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__EMI_WEIM_A_19 IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__GPIO2_19 IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__IPU_CSI1_D_14 IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A19__SRC_BT_CFG1_4 IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__EMI_WEIM_A_18 IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__GPIO2_20 IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__IPU_CSI1_D_13 IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A18__SRC_BT_CFG1_3 IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__EMI_WEIM_A_17 IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__GPIO2_21 IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__IPU_CSI1_D_12 IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A17__SRC_BT_CFG1_2 IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__EMI_WEIM_A_16 IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__GPIO2_22 IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_A16__SRC_BT_CFG1_1 IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__GPIO2_23 IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__ECSPI2_SCLK IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS0__IPU_DI1_PIN5 IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__GPIO2_24 IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__ECSPI2_MOSI IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_CS1__IPU_DI1_PIN6 IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__EMI_WEIM_OE IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__GPIO2_25 IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__ECSPI2_MISO IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__IPU_DI1_PIN7 IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_OE__USBPHY2_IDDIG IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__EMI_WEIM_RW IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__GPIO2_26 IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__ECSPI2_SS0 IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__IPU_DI1_PIN8 IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__EMI_WEIM_LBA IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__GPIO2_27 IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__ECSPI2_SS1 IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__IPU_DI1_PIN17 IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__GPIO2_28 IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__IPU_CSI1_D_11 IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__GPC_PMIC_RDY IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__GPIO2_29 IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__IPU_CSI1_D_10 IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__GPIO3_0 IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__IPU_CSI1_D_9 IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__GPIO3_1 IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__IPU_CSI1_D_8 IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__GPIO3_2 IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__IPU_CSI1_D_7 IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__GPIO3_3 IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__IPU_CSI1_D_6 IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__GPIO3_4 IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__IPU_CSI1_D_5 IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__IPU_CSI1_D_3 IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__GPIO3_7 IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__IPU_CSI1_D_2 IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__GPIO3_8 IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__IPU_CSI1_D_1 IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__GPIO3_9 IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__IPU_CSI1_D_0 IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__GPIO3_10 IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__IPU_DI1_PIN15 IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__GPIO3_11 IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__IPU_DI1_PIN2 IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__GPIO3_12 IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__IPU_DI1_PIN3 IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__GPIO3_13 IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__IPU_DI1_D0_CS IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__GPIO3_14 IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__IPU_DI1_D1_CS IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__GPIO3_15 IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__IPU_DI1_PIN1 IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_DA15__IPU_DI1_PIN4 IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WE_B__GPIO6_12 IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RE_B__GPIO6_13 IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_WAIT__GPIO5_0 IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX3_P__GPIO6_22 IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX2_P__GPIO6_24 IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_CLK_P__GPIO6_26 IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX1_P__GPIO6_28 IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX0_P__GPIO6_30 IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX3_P__GPIO7_22 IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_CLK_P__GPIO7_24 IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX2_P__GPIO7_26 IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX1_P__GPIO7_28 IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX0_P__GPIO7_30 IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_10__GPIO4_0 IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_10__OSC32k_32K_OUT IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_11__GPIO4_1 IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_12__GPIO4_2 IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_13__GPIO4_3 IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_14__GPIO4_4 IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CLE__EMI_NANDF_CLE IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CLE__GPIO6_7 IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_ALE__EMI_NANDF_ALE IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_ALE__GPIO6_8 IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WP_B__GPIO6_9 IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RB0__GPIO6_10 IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS0__GPIO6_11 IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__GPIO6_14 IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__MLB_MLBCLK IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__GPIO6_15 IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__IPU_SISG_0 IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__ESAI1_TX0 IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__EMI_WEIM_CRE IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__MLB_MLBSIG IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__GPIO6_16 IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__IPU_SISG_1 IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__ESAI1_TX1 IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__MLB_MLBDAT IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL) -#define MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__GPIO1_22 IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__ESAI1_SCKR IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__FEC_COL IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__FEC_TX_CLK IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__GPIO1_23 IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__ESAI1_FSR IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__FEC_RX_ER IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__GPIO1_24 IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__ESAI1_HCKR IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__FEC_RX_CLK IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_CRS_DV__FEC_RX_DV IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_CRS_DV__GPIO1_25 IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_CRS_DV__ESAI1_SCKT IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__FEC_RDATA_1 IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__GPIO1_26 IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__ESAI1_FST IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__MLB_MLBSIG IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__FEC_RDATA_0 IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__GPIO1_27 IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__ESAI1_HCKT IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_RXD0__OSC32k_32K_OUT IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TX_EN__GPIO1_28 IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__FEC_TDATA_1 IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__GPIO1_29 IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__MLB_MLBCLK IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__FEC_TDATA_0 IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__GPIO1_30 IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__GPIO1_31 IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__MLB_MLBDAT IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMACK__UART1_RXD_MUX IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_BUFFER_EN__GPIO7_1 IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOR__PATA_DIOR IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOR__GPIO7_3 IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOR__UART2_RTS IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DIOR__CAN1_RXCAN IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL) -#define MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__GPIO7_5 IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__ESDHC3_CLK IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__UART1_RTS IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__CAN2_RXCAN IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL) -#define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_0__PATA_DA_0 IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_0__GPIO7_6 IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_0__ESDHC3_RST IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_0__OWIRE_LINE IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DA_2__ESDHC4_CLK IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DA_2__UART3_RTS IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_CS_1__UART3_RXD_MUX IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL) -#define MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__PATA_DATA_0 IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__GPIO2_0 IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__ESDHC3_DAT4 IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__PATA_DATA_1 IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__GPIO2_1 IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__ESDHC3_DAT5 IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__PATA_DATA_2 IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__GPIO2_2 IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__ESDHC3_DAT6 IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__PATA_DATA_3 IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__GPIO2_3 IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__ESDHC3_DAT7 IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__PATA_DATA_4 IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__GPIO2_4 IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__ESDHC4_DAT4 IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__PATA_DATA_5 IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__GPIO2_5 IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__ESDHC4_DAT7 IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__PATA_DATA_8 IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__GPIO2_8 IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__ESDHC1_DAT4 IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__ESDHC3_DAT0 IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__PATA_DATA_9 IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__GPIO2_9 IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__ESDHC1_DAT5 IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__ESDHC3_DAT1 IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__PATA_DATA_10 IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__GPIO2_10 IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__ESDHC1_DAT6 IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__ESDHC3_DAT2 IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__PATA_DATA_11 IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__GPIO2_11 IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__ESDHC1_DAT7 IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__ESDHC3_DAT3 IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__PATA_DATA_12 IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__GPIO2_12 IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__ESDHC2_DAT4 IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__ESDHC4_DAT0 IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__PATA_DATA_13 IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__GPIO2_13 IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__ESDHC2_DAT5 IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__ESDHC4_DAT1 IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__PATA_DATA_14 IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__GPIO2_14 IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__ESDHC2_DAT6 IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__ESDHC4_DAT2 IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__PATA_DATA_15 IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__GPIO2_15 IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__ESDHC2_DAT7 IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__ESDHC4_DAT3 IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__GPIO1_16 IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__GPT_CAPIN1 IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__CSPI_MISO IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA0__CCM_PLL3_BYP IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__GPIO1_17 IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__GPT_CAPIN2 IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__CSPI_SS0 IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA1__CCM_PLL4_BYP IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_CMD__GPIO1_18 IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__GPT_CMPOUT1 IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__CSPI_MOSI IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL) -#define MX53_PAD_SD1_CMD__CCM_PLL1_BYP IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__GPIO1_19 IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__GPT_CMPOUT2 IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__PWM2_PWMO IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_B IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__CSPI_SS1 IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA2__CCM_PLL2_BYP IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_CLK__GPIO1_20 IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__OSC32k_32K_OUT IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__GPT_CLKIN IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__CSPI_SCLK IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL) -#define MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__GPIO1_21 IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__GPT_CMPOUT3 IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__PWM1_PWMO IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_B IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__CSPI_SS2 IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_CLK__GPIO1_10 IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__KPP_COL_5 IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL) -#define MX53_PAD_SD2_CLK__SCC_RANDOM_V IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_CMD__GPIO1_11 IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__KPP_ROW_5 IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL) -#define MX53_PAD_SD2_CMD__SCC_RANDOM IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__GPIO1_12 IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__KPP_COL_6 IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA3__SJC_DONE IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__GPIO1_13 IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__KPP_ROW_6 IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__CSPI_SS1 IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA2__SJC_FAIL IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__GPIO1_14 IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__KPP_COL_7 IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__CSPI_SS0 IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA1__RTIC_SEC_VIO IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__GPIO1_15 IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__KPP_ROW_7 IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__CSPI_MISO IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL) -#define MX53_PAD_SD2_DATA0__RTIC_DONE_INT IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__CCM_CLKO IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__GPIO1_0 IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__KPP_COL_5 IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__EPIT1_EPITO IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__SRTC_ALARM_DEB IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__USBOH3_USBH1_PWR IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_0__CSU_TD IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__ESAI1_SCKR IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__GPIO1_1 IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__KPP_ROW_5 IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__PWM2_PWMO IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__WDOG2_WDOG_B IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__ESDHC1_CD IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_1__SRC_TESTER_ACK IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__ESAI1_FSR IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__GPIO1_9 IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__KPP_COL_6 IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__CCM_REF_EN_B IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__PWM1_PWMO IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__WDOG1_WDOG_B IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__ESDHC1_WP IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_9__SCC_FAIL_STATE IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__ESAI1_HCKR IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__GPIO1_3 IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__I2C3_SCL IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__CCM_CLKO2 IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__USBOH3_USBH1_OC IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_3__MLB_MLBCLK IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__ESAI1_SCKT IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__GPIO1_6 IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__I2C3_SDA IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__ESDHC2_LCTL IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_6__MLB_MLBSIG IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__ESAI1_FST IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__GPIO1_2 IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__KPP_ROW_6 IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__CCM_CCM_OUT_1 IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__ESDHC2_WP IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_2__MLB_MLBDAT IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__ESAI1_HCKT IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__GPIO1_4 IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__KPP_COL_7 IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__CCM_CCM_OUT_2 IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__ESDHC2_CD IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_4__SCC_SEC_STATE IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__ESAI1_TX2_RX3 IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__GPIO1_5 IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__KPP_ROW_7 IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL) -#define MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL) -#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_8__CCM_PLL3_BYP IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__ESAI1_TX3_RX2 IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__GPIO7_11 IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__SPDIF_IN1 IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__I2C3_SDA IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL) -#define MX53_PAD_GPIO_16__SJC_DE_B IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__ESAI1_TX0 IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__GPIO7_12 IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__GPC_PMIC_RDY IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__SPDIF_OUT1 IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__IPU_SNOOP2 IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_17__SJC_JTAG_ACT IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__ESAI1_TX1 IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__GPIO7_13 IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__OWIRE_LINE IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__ESDHC1_LCTL IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL) -#define MX53_PAD_GPIO_18__SRC_SYSTEM_RST IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL) - -#endif /* __MACH_IOMUX_MX53_H__ */ -- cgit v1.2.3-58-ga151 From b72cf10578651411143b0ef21bfe0b6ffc921aa2 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Aug 2012 19:45:19 +0800 Subject: ARM: dts: imx51-babbage: add pinctrl settings Add pinctrl settings for the exsiting devices in imx51-babbage.dts. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 36 ++++++++++- arch/arm/boot/dts/imx51.dtsi | 116 ++++++++++++++++++++++++++++++++++++ 2 files changed, 150 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 68460008f662..6f4c80e26c57 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,23 +25,31 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; fsl,cd-internal; fsl,wp-internal; status = "okay"; }; esdhc@70008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; cd-gpios = <&gpio1 6 0>; wp-gpios = <&gpio1 5 0>; status = "okay"; }; uart3: serial@7000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@70010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; @@ -170,22 +178,42 @@ }; iomuxc@73fa8000 { - compatible = "fsl,imx51-iomuxc-babbage"; - reg = <0x73fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; }; uart1: serial@73fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; fsl,uart-has-rtscts; status = "okay"; }; uart2: serial@73fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@80000000 { /* aips-2 */ i2c@83fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -198,10 +226,14 @@ }; audmux@83fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@83fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "mii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 6aedb323f184..2f71a91ca98e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -211,6 +211,122 @@ status = "disabled"; }; + iomuxc@73fa8000 { + compatible = "fsl,imx51-iomuxc"; + reg = <0x73fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ + 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ + 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ + 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ + 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ + 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ + 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ + 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ + 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ + 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ + 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ + 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ + 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ + 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ + 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ + 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ + 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ + 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ + 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ + 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ + 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ + 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ + 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ + 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ + 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ + 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ + 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ + 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ + 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ + 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ + 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ + 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ + 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ + 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ + 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ + 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ + 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ + 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ + 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ + 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ + >; + }; + }; + }; + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; -- cgit v1.2.3-58-ga151 From b6798f88bc1458eb7ab671b874880fd7ba77cfb4 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Aug 2012 19:55:37 +0800 Subject: ARM: imx51: build in pinctrl support With the imx51 DT board having pinctrl setup define in device tree, it's time to remove dummy pinctrl state and build in the real imx51 pinctrl support. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/Kconfig | 2 ++ arch/arm/mach-imx/imx51-dt.c | 3 --- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 374fcc256d43..7ca5fe45945f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -101,6 +101,8 @@ config SOC_IMX51 select SOC_IMX5 select ARCH_MX5 select ARCH_MX51 + select PINCTRL + select PINCTRL_IMX51 if ARCH_IMX_V4_V5 diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 8604165b2a57..306cddca6c7c 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -55,8 +54,6 @@ static void __init imx51_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - pinctrl_provide_dummies(); - node = of_find_matching_node(NULL, imx51_iomuxc_of_match); if (node) { of_id = of_match_node(imx51_iomuxc_of_match, node); -- cgit v1.2.3-58-ga151 From 07827831822517b3713661c943e42389977407ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 13 Aug 2012 21:13:10 +0800 Subject: ARM: imx51: decouple device tree boot from board files Now, imx51 device tree kernel calls pinctrl to set up pins. The function used to hook up non-DT pin setup is not needed for DT boot any more. Remove it from DT image. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/imx51-dt.c | 17 ----------------- arch/arm/plat-mxc/include/mach/common.h | 1 - 2 files changed, 18 deletions(-) diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 306cddca6c7c..f233b4bb2342 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -43,25 +43,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, - { /* sentinel */ } -}; - static void __init imx51_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - node = of_find_matching_node(NULL, imx51_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx51_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - of_platform_populate(NULL, of_default_bus_match_table, imx51_auxdata_lookup, NULL); } diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 0932fc6e2223..28ba09f4ebb9 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -136,7 +136,6 @@ extern void imx_src_prepare_restart(void); extern void imx_gpc_init(void); extern void imx_gpc_pre_suspend(void); extern void imx_gpc_post_resume(void); -extern void imx51_babbage_common_init(void); extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); extern void imx6q_clock_map_io(void); -- cgit v1.2.3-58-ga151 From f8135a74df53ba7010a162dddd112b73ee5652e3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 24 Aug 2012 12:24:50 -0300 Subject: ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog' 'pinctrl_gpio_hog' is used to setup the pin functions, and it is not neccesarily used only for GPIO pins, so remove 'gpio' from its name to describe a more generic term. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e34ace784ea3..1c57e19e8a8a 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -46,10 +46,10 @@ iomuxc@020e0000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_hog>; + pinctrl-0 = <&pinctrl_hog>; - gpios { - pinctrl_gpio_hog: gpiohog { + hog { + pinctrl_hog: hoggrp { fsl,pins = < 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ -- cgit v1.2.3-58-ga151 From 0e87e0436c0cc3954eb62181a96d7217ca955a4f Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 22 Aug 2012 21:36:28 +0800 Subject: ARM: imx6q: replace clk_register_clkdev with clock DT lookup It really becomes an maintenance issue that every time a device needs to look up (clk_get) a clock we have to patch kernel clock file to call clk_register_clkdev for that clock. Since clock DT support which is meant to resolve clock lookup in device tree is in place, the patch moves imx6q client devices' clock lookup over to device tree, so that any new lookup to be added at later time can just get done in DT instead of kernel. Signed-off-by: Shawn Guo --- .../devicetree/bindings/clock/imx6q-clock.txt | 222 +++++++++++++++++++++ arch/arm/boot/dts/imx6q-sabrelite.dts | 1 + arch/arm/boot/dts/imx6q.dtsi | 73 ++++++- arch/arm/mach-imx/clk-imx6q.c | 44 +--- arch/arm/mach-imx/mach-imx6q.c | 1 - 5 files changed, 291 insertions(+), 50 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.txt diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt new file mode 100644 index 000000000000..492bd991d52a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -0,0 +1,222 @@ +* Clock bindings for Freescale i.MX6 Quad + +Required properties: +- compatible: Should be "fsl,imx6q-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX6Q +clocks and IDs. + + Clock ID + --------------------------- + dummy 0 + ckil 1 + ckih 2 + osc 3 + pll2_pfd0_352m 4 + pll2_pfd1_594m 5 + pll2_pfd2_396m 6 + pll3_pfd0_720m 7 + pll3_pfd1_540m 8 + pll3_pfd2_508m 9 + pll3_pfd3_454m 10 + pll2_198m 11 + pll3_120m 12 + pll3_80m 13 + pll3_60m 14 + twd 15 + step 16 + pll1_sw 17 + periph_pre 18 + periph2_pre 19 + periph_clk2_sel 20 + periph2_clk2_sel 21 + axi_sel 22 + esai_sel 23 + asrc_sel 24 + spdif_sel 25 + gpu2d_axi 26 + gpu3d_axi 27 + gpu2d_core_sel 28 + gpu3d_core_sel 29 + gpu3d_shader_sel 30 + ipu1_sel 31 + ipu2_sel 32 + ldb_di0_sel 33 + ldb_di1_sel 34 + ipu1_di0_pre_sel 35 + ipu1_di1_pre_sel 36 + ipu2_di0_pre_sel 37 + ipu2_di1_pre_sel 38 + ipu1_di0_sel 39 + ipu1_di1_sel 40 + ipu2_di0_sel 41 + ipu2_di1_sel 42 + hsi_tx_sel 43 + pcie_axi_sel 44 + ssi1_sel 45 + ssi2_sel 46 + ssi3_sel 47 + usdhc1_sel 48 + usdhc2_sel 49 + usdhc3_sel 50 + usdhc4_sel 51 + enfc_sel 52 + emi_sel 53 + emi_slow_sel 54 + vdo_axi_sel 55 + vpu_axi_sel 56 + cko1_sel 57 + periph 58 + periph2 59 + periph_clk2 60 + periph2_clk2 61 + ipg 62 + ipg_per 63 + esai_pred 64 + esai_podf 65 + asrc_pred 66 + asrc_podf 67 + spdif_pred 68 + spdif_podf 69 + can_root 70 + ecspi_root 71 + gpu2d_core_podf 72 + gpu3d_core_podf 73 + gpu3d_shader 74 + ipu1_podf 75 + ipu2_podf 76 + ldb_di0_podf 77 + ldb_di1_podf 78 + ipu1_di0_pre 79 + ipu1_di1_pre 80 + ipu2_di0_pre 81 + ipu2_di1_pre 82 + hsi_tx_podf 83 + ssi1_pred 84 + ssi1_podf 85 + ssi2_pred 86 + ssi2_podf 87 + ssi3_pred 88 + ssi3_podf 89 + uart_serial_podf 90 + usdhc1_podf 91 + usdhc2_podf 92 + usdhc3_podf 93 + usdhc4_podf 94 + enfc_pred 95 + enfc_podf 96 + emi_podf 97 + emi_slow_podf 98 + vpu_axi_podf 99 + cko1_podf 100 + axi 101 + mmdc_ch0_axi_podf 102 + mmdc_ch1_axi_podf 103 + arm 104 + ahb 105 + apbh_dma 106 + asrc 107 + can1_ipg 108 + can1_serial 109 + can2_ipg 110 + can2_serial 111 + ecspi1 112 + ecspi2 113 + ecspi3 114 + ecspi4 115 + ecspi5 116 + enet 117 + esai 118 + gpt_ipg 119 + gpt_ipg_per 120 + gpu2d_core 121 + gpu3d_core 122 + hdmi_iahb 123 + hdmi_isfr 124 + i2c1 125 + i2c2 126 + i2c3 127 + iim 128 + enfc 129 + ipu1 130 + ipu1_di0 131 + ipu1_di1 132 + ipu2 133 + ipu2_di0 134 + ldb_di0 135 + ldb_di1 136 + ipu2_di1 137 + hsi_tx 138 + mlb 139 + mmdc_ch0_axi 140 + mmdc_ch1_axi 141 + ocram 142 + openvg_axi 143 + pcie_axi 144 + pwm1 145 + pwm2 146 + pwm3 147 + pwm4 148 + per1_bch 149 + gpmi_bch_apb 150 + gpmi_bch 151 + gpmi_io 152 + gpmi_apb 153 + sata 154 + sdma 155 + spba 156 + ssi1 157 + ssi2 158 + ssi3 159 + uart_ipg 160 + uart_serial 161 + usboh3 162 + usdhc1 163 + usdhc2 164 + usdhc3 165 + usdhc4 166 + vdo_axi 167 + vpu_axi 168 + cko1 169 + pll1_sys 170 + pll2_bus 171 + pll3_usb_otg 172 + pll4_audio 173 + pll5_video 174 + pll6_mlb 175 + pll7_usb_host 176 + pll8_enet 177 + ssi1_ipg 178 + ssi2_ipg 179 + ssi3_ipg 180 + rom 181 + usbphy1 182 + usbphy2 183 + ldb_di0_div_3_5 184 + ldb_di1_div_3_5 185 + +Examples: + +clks: ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + clock-output-names = ... + "uart_ipg", + "uart_serial", + ...; +}; + +uart1: serial@02020000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 72f30f3e6171..cfdbe539c43e 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -111,6 +111,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 169>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index fd57079f71a9..925da33420e2 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -97,18 +97,23 @@ dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + clocks = <&clks 106>; }; gpmi-nand@00112000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x00112000 0x2000>, <0x00114000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; - fsl,gpmi-dma-channel = <0>; - status = "disabled"; + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 152>, <&clks 153>, <&clks 151>, + <&clks 150>, <&clks 149>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; }; timer@00a00600 { @@ -150,6 +155,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 0x04>; + clocks = <&clks 112>, <&clks 112>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -159,6 +166,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 0x04>; + clocks = <&clks 113>, <&clks 113>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -168,6 +177,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 0x04>; + clocks = <&clks 114>, <&clks 114>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -177,6 +188,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 0x04>; + clocks = <&clks 115>, <&clks 115>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -186,6 +199,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 0x04>; + clocks = <&clks 116>, <&clks 116>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -193,6 +208,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,6 +222,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; + clocks = <&clks 178>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <38 37>; status = "disabled"; @@ -214,6 +232,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; + clocks = <&clks 179>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <42 41>; status = "disabled"; @@ -223,6 +242,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; + clocks = <&clks 180>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <46 45>; status = "disabled"; @@ -362,6 +382,7 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; + clocks = <&clks 0>; status = "disabled"; }; @@ -369,13 +390,15 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; + clocks = <&clks 0>; status = "disabled"; }; - ccm@020c4000 { + clks: ccm@020c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; }; anatop@020c8000 { @@ -472,12 +495,14 @@ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + clocks = <&clks 182>; }; usbphy2: usbphy@020ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; + clocks = <&clks 183>; }; snvs@020cc000 { @@ -612,6 +637,9 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; + clocks = <&clks 155>, <&clks 155>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; }; }; @@ -635,6 +663,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -643,6 +672,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy2>; status = "disabled"; }; @@ -651,6 +681,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; + clocks = <&clks 162>; status = "disabled"; }; @@ -658,6 +689,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; + clocks = <&clks 162>; status = "disabled"; }; @@ -665,6 +697,8 @@ compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; + clocks = <&clks 117>, <&clks 117>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -677,6 +711,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; + clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -684,6 +720,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; + clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -691,6 +729,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; + clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -698,6 +738,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; + clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -707,6 +749,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; + clocks = <&clks 125>; status = "disabled"; }; @@ -716,6 +759,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; + clocks = <&clks 126>; status = "disabled"; }; @@ -725,6 +769,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; + clocks = <&clks 127>; status = "disabled"; }; @@ -788,6 +833,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -795,6 +842,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -802,6 +851,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -809,6 +860,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; }; diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e22..bbc71f57b92b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -157,6 +157,7 @@ enum mx6q_clks { }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { mmdc_ch0_axi, rom, @@ -392,48 +393,13 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); - clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); - clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); - clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); - clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); - clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial"); - clk_register_clkdev(clk[enet], NULL, "2188000.ethernet"); - clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc"); - clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc"); - clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc"); - clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc"); - clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c"); - clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c"); - clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c"); - clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi"); - clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi"); - clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi"); - clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi"); - clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi"); - clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma"); - clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog"); - clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi"); clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a76..0b30aa8799d2 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -100,7 +100,6 @@ static void __init imx6q_sabrelite_cko1_setup(void) clk_set_parent(cko1_sel, ahb); rate = clk_round_rate(cko1, 16000000); clk_set_rate(cko1, rate); - clk_register_clkdev(cko1, NULL, "0-000a"); put_clk: if (!IS_ERR(cko1_sel)) clk_put(cko1_sel); -- cgit v1.2.3-58-ga151 From 44b12ef78106141574f038852d013fd3207acb23 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 11 Sep 2012 11:42:26 -0600 Subject: ARM: dt: tegra: configure power off for some boards For Seaboard, Ventana, and Cardhu, add DT property to tell the regulator that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-seaboard.dts | 2 ++ arch/arm/boot/dts/tegra20-ventana.dts | 2 ++ arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 92deb36ae03c..e60dc7124e92 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -379,6 +379,8 @@ reg = <0x34>; interrupts = <0 86 0x4>; + ti,system-power-controller; + #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 4ec6b4cd9d52..3e5952fcfbc5 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -295,6 +295,8 @@ reg = <0x34>; interrupts = <0 86 0x4>; + ti,system-power-controller; + #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 47946939b49e..d10c9c5a3606 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -156,6 +156,8 @@ #interrupt-cells = <2>; interrupt-controller; + ti,system-power-controller; + #gpio-cells = <2>; gpio-controller; -- cgit v1.2.3-58-ga151 From 63c86c950132c3e61c6793c1dc9116e134e73f9d Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 16:00:13 -0700 Subject: ARM: msm: Add handle_irq handler for 8660 DT machine Commit 041f777 (ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER, 2011-09-06) forgot to add the .handle_irq for the DT machine record. Add it so we get interrupts instead of panics on DT enabled bootloaders. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm8x60.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index e37a724cd1eb..13ca9bb5a4d6 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -158,6 +158,7 @@ MACHINE_END DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, .init_machine = msm8x60_dt_init, .init_late = msm8x60_init_late, .timer = &msm_timer, -- cgit v1.2.3-58-ga151 From e8ea1ea90bfd90d3047924b77a3f76cf2147ada1 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 22 Aug 2012 16:00:14 -0700 Subject: ARM: msm: Add msm8660-surf.dts to Makefile.boot Add this entry to the Makefile so that we can build the dtb automatically with 'make dtbs'. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile.boot | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot index 9b803a578b4d..8de06781c6df 100644 --- a/arch/arm/mach-msm/Makefile.boot +++ b/arch/arm/mach-msm/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x10008000 params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 + +dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb -- cgit v1.2.3-58-ga151 From 66a8950949c12a2600ff62e78b24f42ef8f6d28e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:51 -0700 Subject: ARM: msm: Don't touch GIC registers outside of GIC code The MSM code has some antiquated register writes to set up the PPIs to be edge triggered. Now that we have the percpu irq interface we don't need this code so let's remove it and update the percpu irq user (msm_timer) to set the irq type. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-msm8960.c | 13 ------------- arch/arm/mach-msm/board-msm8x60.c | 3 --- arch/arm/mach-msm/platsmp.c | 8 -------- arch/arm/mach-msm/timer.c | 4 ++-- 4 files changed, 2 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 65f4a1daa2e5..bdafe791fd0b 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -55,24 +55,11 @@ static void __init msm8960_map_io(void) static void __init msm8960_init_irq(void) { - unsigned int i; gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, (void *)MSM_QGIC_CPU_BASE); - /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ - writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - if (machine_is_msm8960_rumi3()) writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); - - /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet - * as they are configured as level, which does not play nice with - * handle_percpu_irq. - */ - for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { - if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) - irq_set_handler(i, handle_percpu_irq); - } } static struct platform_device *sim_devices[] __initdata = { diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 13ca9bb5a4d6..9df5c8357495 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -67,9 +67,6 @@ static void __init msm8x60_init_irq(void) of_irq_init(msm_dt_gic_match); #endif - /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ - writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - /* RUMI does not adhere to GIC spec by enabling STIs by default. * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. */ diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index db0117ec55f4..b119f9947dfe 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -22,17 +22,12 @@ #include #include -#include - #include "scm-boot.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ -#define GIC_PPI_EDGE_MASK 0xFFFFD7FF - extern void msm_secondary_startup(void); /* * control for which core is the next to come out of the secondary @@ -50,9 +45,6 @@ static inline int get_core_count(void) void __cpuinit platform_secondary_init(unsigned int cpu) { - /* Configure edge-triggered PPIs */ - writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 812808254936..36bbc60b699f 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -151,7 +151,7 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) *__this_cpu_ptr(msm_evt.percpu_evt) = evt; clockevents_register_device(evt); - enable_percpu_irq(evt->irq, 0); + enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); return 0; } @@ -219,7 +219,7 @@ static void __init msm_timer_init(void) res = request_percpu_irq(ce->irq, msm_timer_interrupt, ce->name, msm_evt.percpu_evt); if (!res) { - enable_percpu_irq(ce->irq, 0); + enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_LOCAL_TIMERS local_timer_register(&msm_local_timer_ops); #endif -- cgit v1.2.3-58-ga151 From 4312a7ef9cd744849e16ef4bdeb7ca6beec9ec76 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:52 -0700 Subject: ARM: msm: Allow timer.c to compile on multiple targets The timer code relies on #defines from mach/iomap.h, cpu_is_*() checks, and a global irq #define. All this makes this file impossible to compile in a mult-target build. Therefore, make a sys_timer struct for each SoC so that machine descriptors can reference the correct timer. Then go through and replace all the defines with raw values that are passed to a common initialization function. This paves the way to adding DT support to this code as well as allows us to compile this file on multiple targets at the same time. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-halibut.c | 5 +- arch/arm/mach-msm/board-msm7x30.c | 9 ++- arch/arm/mach-msm/board-msm8960.c | 5 +- arch/arm/mach-msm/board-msm8x60.c | 11 +-- arch/arm/mach-msm/board-qsd8x50.c | 7 +- arch/arm/mach-msm/board-trout.c | 5 +- arch/arm/mach-msm/common.h | 21 ++++++ arch/arm/mach-msm/include/mach/board.h | 2 - arch/arm/mach-msm/timer.c | 120 +++++++++++++++++++++++---------- 9 files changed, 125 insertions(+), 60 deletions(-) create mode 100644 arch/arm/mach-msm/common.h diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 4fa3e99d9a62..6ce542e2e21c 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -36,6 +36,7 @@ #include #include "devices.h" +#include "common.h" static struct resource smc91x_resources[] = { [0] = { @@ -66,8 +67,6 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; -extern struct sys_timer msm_timer; - static void __init halibut_init_early(void) { arch_ioremap_caller = __msm_ioremap_caller; @@ -107,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .init_irq = halibut_init_irq, .init_machine = halibut_init, .init_late = halibut_init_late, - .timer = &msm_timer, + .timer = &msm7x01_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index a5001378135d..effa6f4336c7 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -38,8 +38,7 @@ #include "devices.h" #include "gpiomux.h" #include "proc_comm.h" - -extern struct sys_timer msm_timer; +#include "common.h" static void __init msm7x30_fixup(struct tag *tag, char **cmdline, struct meminfo *mi) @@ -132,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") @@ -143,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") @@ -154,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index bdafe791fd0b..fafead236311 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -31,6 +31,7 @@ #include #include "devices.h" +#include "common.h" static void __init msm8960_fixup(struct tag *tag, char **cmdline, struct meminfo *mi) @@ -90,7 +91,7 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, - .timer = &msm_timer, + .timer = &msm8960_timer, .handle_irq = gic_handle_irq, .init_machine = msm8960_sim_init, .init_late = msm8960_init_late, @@ -101,7 +102,7 @@ MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, - .timer = &msm_timer, + .timer = &msm8960_timer, .handle_irq = gic_handle_irq, .init_machine = msm8960_rumi3_init, .init_late = msm8960_init_late, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 9df5c8357495..93f90410d0dd 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -28,6 +28,7 @@ #include #include +#include "common.h" static void __init msm8x60_fixup(struct tag *tag, char **cmdline, struct meminfo *mi) @@ -114,7 +115,7 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .init_late = msm8x60_init_late, - .timer = &msm_timer, + .timer = &msm8x60_timer, MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") @@ -125,7 +126,7 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .init_late = msm8x60_init_late, - .timer = &msm_timer, + .timer = &msm8x60_timer, MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") @@ -136,7 +137,7 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .init_late = msm8x60_init_late, - .timer = &msm_timer, + .timer = &msm8x60_timer, MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") @@ -147,7 +148,7 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") .handle_irq = gic_handle_irq, .init_machine = msm8x60_init, .init_late = msm8x60_init_late, - .timer = &msm_timer, + .timer = &msm8x60_timer, MACHINE_END #ifdef CONFIG_OF @@ -158,7 +159,7 @@ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .handle_irq = gic_handle_irq, .init_machine = msm8x60_dt_init, .init_late = msm8x60_init_late, - .timer = &msm_timer, + .timer = &msm8x60_timer, .dt_compat = msm8x60_fluid_match, MACHINE_END #endif /* CONFIG_OF */ diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index c8fe0edb9761..b16b71abf5f6 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -35,8 +35,7 @@ #include #include "devices.h" - -extern struct sys_timer msm_timer; +#include "common.h" static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; @@ -201,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &msm_timer, + .timer = &qsd8x50_timer, MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") @@ -210,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &msm_timer, + .timer = &qsd8x50_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index bbe13f12fa01..4ba0800e243e 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -31,6 +31,7 @@ #include "devices.h" #include "board-trout.h" +#include "common.h" extern int trout_init_mmc(unsigned int); @@ -42,8 +43,6 @@ static struct platform_device *devices[] __initdata = { &msm_device_i2c, }; -extern struct sys_timer msm_timer; - static void __init trout_init_early(void) { arch_ioremap_caller = __msm_ioremap_caller; @@ -111,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream") .init_irq = trout_init_irq, .init_machine = trout_init, .init_late = trout_init_late, - .timer = &msm_timer, + .timer = &msm7x01_timer, MACHINE_END diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h new file mode 100644 index 000000000000..4c2dd16e659b --- /dev/null +++ b/arch/arm/mach-msm/common.h @@ -0,0 +1,21 @@ +/* Copyright (c) 2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_COMMON_H +#define __MACH_COMMON_H + +extern struct sys_timer msm7x01_timer; +extern struct sys_timer msm7x30_timer; +extern struct sys_timer msm8x60_timer; +extern struct sys_timer msm8960_timer; +extern struct sys_timer qsd8x50_timer; + +#endif diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8edfafd1..fc40bbc18e41 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -33,8 +33,6 @@ struct msm_acpu_clock_platform_data struct clk_lookup; -extern struct sys_timer msm_timer; - /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 36bbc60b699f..ddb870117659 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -1,7 +1,7 @@ /* * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -26,9 +26,7 @@ #include #include -#include -#include -#include +#include "common.h" #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 @@ -36,7 +34,7 @@ #define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) #define TIMER_ENABLE_EN BIT(0) #define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x0034 +#define DGT_CLK_CTL 0x0030 #define DGT_CLK_CTL_DIV_4 0x3 #define GPT_HZ 32768 @@ -172,44 +170,21 @@ static notrace u32 msm_sched_clock_read(void) return msm_clocksource.read(&msm_clocksource); } -static void __init msm_timer_init(void) +static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, + bool percpu) { struct clock_event_device *ce = &msm_clockevent; struct clocksource *cs = &msm_clocksource; int res; - u32 dgt_hz; - - if (cpu_is_msm7x01()) { - event_base = MSM_CSR_BASE; - source_base = MSM_CSR_BASE + 0x10; - dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */ - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - } else if (cpu_is_msm7x30()) { - event_base = MSM_CSR_BASE + 0x04; - source_base = MSM_CSR_BASE + 0x24; - dgt_hz = 24576000 / 4; - } else if (cpu_is_qsd8x50()) { - event_base = MSM_CSR_BASE; - source_base = MSM_CSR_BASE + 0x10; - dgt_hz = 19200000 / 4; - } else if (cpu_is_msm8x60() || cpu_is_msm8960()) { - event_base = MSM_TMR_BASE + 0x04; - /* Use CPU0's timer as the global clock source. */ - source_base = MSM_TMR0_BASE + 0x24; - dgt_hz = 27000000 / 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); - } else - BUG(); writel_relaxed(0, event_base + TIMER_ENABLE); writel_relaxed(0, event_base + TIMER_CLEAR); writel_relaxed(~0, event_base + TIMER_MATCH_VAL); ce->cpumask = cpumask_of(0); + ce->irq = irq; - ce->irq = INT_GP_TIMER_EXP; clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff); - if (cpu_is_msm8x60() || cpu_is_msm8960()) { + if (percpu) { msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *); if (!msm_evt.percpu_evt) { pr_err("memory allocation failed for %s\n", ce->name); @@ -238,10 +213,83 @@ err: res = clocksource_register_hz(cs, dgt_hz); if (res) pr_err("clocksource_register failed\n"); - setup_sched_clock(msm_sched_clock_read, - cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz); + setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz); } -struct sys_timer msm_timer = { - .init = msm_timer_init +static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) +{ + event_base = ioremap(event, SZ_64); + if (!event_base) { + pr_err("Failed to map event base\n"); + return 1; + } + source_base = ioremap(source, SZ_64); + if (!source_base) { + pr_err("Failed to map source base\n"); + return 1; + } + return 0; +} + +static void __init msm7x01_timer_init(void) +{ + struct clocksource *cs = &msm_clocksource; + + if (msm_timer_map(0xc0100000, 0xc0100010)) + return; + cs->read = msm_read_timer_count_shift; + cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); + /* 600 KHz */ + msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, + false); +} + +struct sys_timer msm7x01_timer = { + .init = msm7x01_timer_init +}; + +static void __init msm7x30_timer_init(void) +{ + if (msm_timer_map(0xc0100004, 0xc0100024)) + return; + msm_timer_init(24576000 / 4, 32, 1, false); +} + +struct sys_timer msm7x30_timer = { + .init = msm7x30_timer_init +}; + +static void __init msm8x60_timer_init(void) +{ + if (msm_timer_map(0x02000004, 0x02040024)) + return; + writel_relaxed(DGT_CLK_CTL_DIV_4, event_base + DGT_CLK_CTL); + msm_timer_init(27000000 / 4, 32, 17, true); +} + +struct sys_timer msm8x60_timer = { + .init = msm8x60_timer_init +}; + +static void __init msm8960_timer_init(void) +{ + if (msm_timer_map(0x0200A004, 0x0208A024)) + return; + writel_relaxed(DGT_CLK_CTL_DIV_4, event_base + DGT_CLK_CTL); + msm_timer_init(27000000 / 4, 32, 17, true); +} + +struct sys_timer msm8960_timer = { + .init = msm8960_timer_init +}; + +static void __init qsd8x50_timer_init(void) +{ + if (msm_timer_map(0xAC100000, 0xAC100010)) + return; + msm_timer_init(19200000 / 4, 32, 7, false); +} + +struct sys_timer qsd8x50_timer = { + .init = qsd8x50_timer_init }; -- cgit v1.2.3-58-ga151 From 6e3321631ac2eca99b3289b83ea1f290b1a8bd92 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:53 -0700 Subject: ARM: msm: Add DT support to msm_timer Add support to setup the MSM timer via information obtained from the devicetree. Signed-off-by: Stephen Boyd [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown --- .../devicetree/bindings/arm/msm/timer.txt | 38 ++++++++++ arch/arm/mach-msm/common.h | 1 + arch/arm/mach-msm/timer.c | 87 ++++++++++++++++++++++ 3 files changed, 126 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/msm/timer.txt diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt new file mode 100644 index 000000000000..8c5907b9cae8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -0,0 +1,38 @@ +* MSM Timer + +Properties: + +- compatible : Should at least contain "qcom,msm-timer". More specific + properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general + purpose timer and a debug timer respectively. + +- interrupts : Interrupt indicating a match event. + +- reg : Specifies the base address of the timer registers. The second region + specifies an optional register used to configure the clock divider. + +- clock-frequency : The frequency of the timer in Hz. + +Optional: + +- cpu-offset : per-cpu offset used when the timer is accessed without the + CPU remapping facilities. The offset is cpu-offset * cpu-nr. + +Example: + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 3 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 4c2dd16e659b..7d57fb076193 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -16,6 +16,7 @@ extern struct sys_timer msm7x01_timer; extern struct sys_timer msm7x30_timer; extern struct sys_timer msm8x60_timer; extern struct sys_timer msm8960_timer; +extern struct sys_timer msm_dt_timer; extern struct sys_timer qsd8x50_timer; #endif diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index ddb870117659..b17a39db991e 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -20,6 +20,9 @@ #include #include #include +#include +#include +#include #include #include @@ -216,6 +219,90 @@ err: setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz); } +#ifdef CONFIG_OF +static const struct of_device_id msm_dgt_match[] __initconst = { + { .compatible = "qcom,msm-dgt" }, + { }, +}; + +static const struct of_device_id msm_gpt_match[] __initconst = { + { .compatible = "qcom,msm-gpt" }, + { }, +}; + +static void __init msm_dt_timer_init(void) +{ + struct device_node *np; + u32 freq; + int irq; + struct resource res; + u32 percpu_offset; + void __iomem *dgt_clk_ctl; + + np = of_find_matching_node(NULL, msm_gpt_match); + if (!np) { + pr_err("Can't find GPT DT node\n"); + return; + } + + event_base = of_iomap(np, 0); + if (!event_base) { + pr_err("Failed to map event base\n"); + return; + } + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_err("Can't get irq\n"); + return; + } + of_node_put(np); + + np = of_find_matching_node(NULL, msm_dgt_match); + if (!np) { + pr_err("Can't find DGT DT node\n"); + return; + } + + if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + + if (of_address_to_resource(np, 0, &res)) { + pr_err("Failed to parse DGT resource\n"); + return; + } + + source_base = ioremap(res.start + percpu_offset, resource_size(&res)); + if (!source_base) { + pr_err("Failed to map source base\n"); + return; + } + + if (!of_address_to_resource(np, 1, &res)) { + dgt_clk_ctl = ioremap(res.start + percpu_offset, + resource_size(&res)); + if (!dgt_clk_ctl) { + pr_err("Failed to map DGT control base\n"); + return; + } + writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl); + iounmap(dgt_clk_ctl); + } + + if (of_property_read_u32(np, "clock-frequency", &freq)) { + pr_err("Unknown frequency\n"); + return; + } + of_node_put(np); + + msm_timer_init(freq, 32, irq, !!percpu_offset); +} + +struct sys_timer msm_dt_timer = { + .init = msm_dt_timer_init +}; +#endif + static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) { event_base = ioremap(event, SZ_64); -- cgit v1.2.3-58-ga151 From 8407116075eca1d8d22a466759c3d38678b9dd12 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:54 -0700 Subject: ARM: msm: Move 8660 to DT timer Add the timer entry and point the machine descriptor to the device tree based msm timer. Signed-off-by: Stephen Boyd [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown --- arch/arm/boot/dts/msm8660-surf.dts | 19 ++++++++++++++++++- arch/arm/mach-msm/board-msm8x60.c | 2 +- 2 files changed, 19 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 45bc4bb04e57..31f2157cd7d7 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -7,7 +7,7 @@ compatible = "qcom,msm8660-surf", "qcom,msm8660"; interrupt-parent = <&intc>; - intc: interrupt-controller@02080000 { + intc: interrupt-controller@2080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; #interrupt-cells = <3>; @@ -15,6 +15,23 @@ < 0x02081000 0x1000 >; }; + timer@2000004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x02000004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@2000024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 0 0x301>; + reg = <0x02000024 0x10>, + <0x02000034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; + serial@19c400000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 93f90410d0dd..a28a20e2f118 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -159,7 +159,7 @@ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .handle_irq = gic_handle_irq, .init_machine = msm8x60_dt_init, .init_late = msm8x60_init_late, - .timer = &msm8x60_timer, + .timer = &msm_dt_timer, .dt_compat = msm8x60_fluid_match, MACHINE_END #endif /* CONFIG_OF */ -- cgit v1.2.3-58-ga151 From 5b67bfbae6612c4caa28fa52ced7cf1c122a185e Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:55 -0700 Subject: ARM: msm: Make 8660 a DT only target We don't plan to support anything besides devicetree on these targets so remove all other machine support. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 27 +--------- arch/arm/mach-msm/board-msm8x60.c | 106 ++------------------------------------ arch/arm/mach-msm/common.h | 1 - arch/arm/mach-msm/timer.c | 12 ----- 4 files changed, 6 insertions(+), 140 deletions(-) diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 1cd40ad301d3..cd7842794e4b 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -38,8 +38,6 @@ config ARCH_QSD8X50 config ARCH_MSM8X60 bool "MSM8X60" - select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \ - && !MACH_MSM8X60_FFA) select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 @@ -47,6 +45,7 @@ config ARCH_MSM8X60 select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP + select USE_OF config ARCH_MSM8960 bool "MSM8960" @@ -112,30 +111,6 @@ config MACH_QSD8X50A_ST1_5 help Support for the Qualcomm ST1.5. -config MACH_MSM8X60_RUMI3 - depends on ARCH_MSM8X60 - bool "MSM8x60 RUMI3" - help - Support for the Qualcomm MSM8x60 RUMI3 emulator. - -config MACH_MSM8X60_SURF - depends on ARCH_MSM8X60 - bool "MSM8x60 SURF" - help - Support for the Qualcomm MSM8x60 SURF eval board. - -config MACH_MSM8X60_SIM - depends on ARCH_MSM8X60 - bool "MSM8x60 Simulator" - help - Support for the Qualcomm MSM8x60 simulator. - -config MACH_MSM8X60_FFA - depends on ARCH_MSM8X60 - bool "MSM8x60 FFA" - help - Support for the Qualcomm MSM8x60 FFA eval board. - config MACH_MSM8960_SIM depends on ARCH_MSM8960 bool "MSM8960 Simulator" diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index a28a20e2f118..fdbed439855a 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved. +/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -10,73 +10,26 @@ * GNU General Public License for more details. */ -#include -#include -#include -#include -#include +#include #include -#include #include #include -#include -#include #include #include -#include #include #include #include "common.h" -static void __init msm8x60_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && - tag->u.mem.start == 0x40200000) { - tag->u.mem.start = 0x40000000; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm8x60_reserve(void) -{ - memblock_remove(0x40000000, SZ_2M); -} - -static void __init msm8x60_map_io(void) -{ - msm_map_msm8x60_io(); -} - -#ifdef CONFIG_OF -static struct of_device_id msm_dt_gic_match[] __initdata = { +static const struct of_device_id msm_dt_gic_match[] __initconst = { { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, {} }; -#endif static void __init msm8x60_init_irq(void) { - if (!of_have_populated_dt()) - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); -#ifdef CONFIG_OF - else - of_irq_init(msm_dt_gic_match); -#endif - - /* RUMI does not adhere to GIC spec by enabling STIs by default. - * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. - */ - if (!machine_is_msm8x60_sim()) - writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); -} - -static void __init msm8x60_init(void) -{ + of_irq_init(msm_dt_gic_match); } static void __init msm8x60_init_late(void) @@ -84,7 +37,6 @@ static void __init msm8x60_init_late(void) smd_debugfs_init(); } -#ifdef CONFIG_OF static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; @@ -105,56 +57,9 @@ static const char *msm8x60_fluid_match[] __initdata = { "qcom,msm8660-surf", NULL }; -#endif /* CONFIG_OF */ - -MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm8x60_timer, -MACHINE_END - -MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm8x60_timer, -MACHINE_END - -MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm8x60_timer, -MACHINE_END - -MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm8x60_timer, -MACHINE_END -#ifdef CONFIG_OF -/* TODO: General device tree support for all MSM. */ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .map_io = msm8x60_map_io, + .map_io = msm_map_msm8x60_io, .init_irq = msm8x60_init_irq, .handle_irq = gic_handle_irq, .init_machine = msm8x60_dt_init, @@ -162,4 +67,3 @@ DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") .timer = &msm_dt_timer, .dt_compat = msm8x60_fluid_match, MACHINE_END -#endif /* CONFIG_OF */ diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 7d57fb076193..a20e78e58b0d 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -14,7 +14,6 @@ extern struct sys_timer msm7x01_timer; extern struct sys_timer msm7x30_timer; -extern struct sys_timer msm8x60_timer; extern struct sys_timer msm8960_timer; extern struct sys_timer msm_dt_timer; extern struct sys_timer qsd8x50_timer; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index b17a39db991e..27ade4f1ee16 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -346,18 +346,6 @@ struct sys_timer msm7x30_timer = { .init = msm7x30_timer_init }; -static void __init msm8x60_timer_init(void) -{ - if (msm_timer_map(0x02000004, 0x02040024)) - return; - writel_relaxed(DGT_CLK_CTL_DIV_4, event_base + DGT_CLK_CTL); - msm_timer_init(27000000 / 4, 32, 17, true); -} - -struct sys_timer msm8x60_timer = { - .init = msm8x60_timer_init -}; - static void __init msm8960_timer_init(void) { if (msm_timer_map(0x0200A004, 0x0208A024)) -- cgit v1.2.3-58-ga151 From 5a6e814f5d2bdb6eea99ed032e4be3a2dc295099 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:56 -0700 Subject: ARM: msm: Rename board-msm8x60 to signify its DT only status Rename this file to signify that this board is only supported via devicetree. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Makefile | 2 +- arch/arm/mach-msm/board-dt-8660.c | 69 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-msm/board-msm8x60.c | 69 --------------------------------------- 3 files changed, 70 insertions(+), 70 deletions(-) create mode 100644 arch/arm/mach-msm/board-dt-8660.c delete mode 100644 arch/arm/mach-msm/board-msm8x60.c diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4ad3969b9881..c4f5169a684d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o +obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c new file mode 100644 index 000000000000..fdbed439855a --- /dev/null +++ b/arch/arm/mach-msm/board-dt-8660.c @@ -0,0 +1,69 @@ +/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include "common.h" + +static const struct of_device_id msm_dt_gic_match[] __initconst = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; + +static void __init msm8x60_init_irq(void) +{ + of_irq_init(msm_dt_gic_match); +} + +static void __init msm8x60_init_late(void) +{ + smd_debugfs_init(); +} + +static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { + {} +}; + +static void __init msm8x60_dt_init(void) +{ + if (of_machine_is_compatible("qcom,msm8660-surf")) { + printk(KERN_INFO "Init surf UART registers\n"); + msm8x60_init_uart12dm(); + } + + of_platform_populate(NULL, of_default_bus_match_table, + msm_auxdata_lookup, NULL); +} + +static const char *msm8x60_fluid_match[] __initdata = { + "qcom,msm8660-fluid", + "qcom,msm8660-surf", + NULL +}; + +DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") + .map_io = msm_map_msm8x60_io, + .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, + .init_machine = msm8x60_dt_init, + .init_late = msm8x60_init_late, + .timer = &msm_dt_timer, + .dt_compat = msm8x60_fluid_match, +MACHINE_END diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c deleted file mode 100644 index fdbed439855a..000000000000 --- a/arch/arm/mach-msm/board-msm8x60.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include "common.h" - -static const struct of_device_id msm_dt_gic_match[] __initconst = { - { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, - {} -}; - -static void __init msm8x60_init_irq(void) -{ - of_irq_init(msm_dt_gic_match); -} - -static void __init msm8x60_init_late(void) -{ - smd_debugfs_init(); -} - -static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { - {} -}; - -static void __init msm8x60_dt_init(void) -{ - if (of_machine_is_compatible("qcom,msm8660-surf")) { - printk(KERN_INFO "Init surf UART registers\n"); - msm8x60_init_uart12dm(); - } - - of_platform_populate(NULL, of_default_bus_match_table, - msm_auxdata_lookup, NULL); -} - -static const char *msm8x60_fluid_match[] __initdata = { - "qcom,msm8660-fluid", - "qcom,msm8660-surf", - NULL -}; - -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .map_io = msm_map_msm8x60_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_dt_init, - .init_late = msm8x60_init_late, - .timer = &msm_dt_timer, - .dt_compat = msm8x60_fluid_match, -MACHINE_END -- cgit v1.2.3-58-ga151 From 85a9f0f576372e033f0aa15485109aa0ee05fef3 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:57 -0700 Subject: ARM: msm: Move io mapping prototypes to common.h Consolidate the handful of iomapping functions into common.h so that board files don't need to include mach/msm_iomap.h if they don't need static virtual mapping addresses. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/board-dt-8660.c | 1 - arch/arm/mach-msm/common.h | 10 ++++++++++ arch/arm/mach-msm/include/mach/board.h | 1 - arch/arm/mach-msm/include/mach/msm_iomap-7x00.h | 7 ------- arch/arm/mach-msm/include/mach/msm_iomap-7x30.h | 4 ---- arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 4 ---- arch/arm/mach-msm/include/mach/msm_iomap-8x50.h | 4 ---- arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 4 ---- arch/arm/mach-msm/io.c | 2 ++ 9 files changed, 12 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c index fdbed439855a..c1ddd480fc87 100644 --- a/arch/arm/mach-msm/board-dt-8660.c +++ b/arch/arm/mach-msm/board-dt-8660.c @@ -19,7 +19,6 @@ #include #include -#include #include "common.h" static const struct of_device_id msm_dt_gic_match[] __initconst = { diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index a20e78e58b0d..9975575a81b9 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -18,4 +18,14 @@ extern struct sys_timer msm8960_timer; extern struct sys_timer msm_dt_timer; extern struct sys_timer qsd8x50_timer; +extern void msm_map_common_io(void); +extern void msm_map_msm7x30_io(void); +extern void msm_map_msm8x60_io(void); +extern void msm_map_msm8960_io(void); +extern void msm_map_qsd8x50_io(void); + +extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller); + + #endif diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index fc40bbc18e41..09654aca6152 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -36,7 +36,6 @@ struct clk_lookup; /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); -void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 6c4046c21296..67dc0e98b958 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -105,11 +105,4 @@ #define MSM_AD5_PHYS 0xAC000000 #define MSM_AD5_SIZE (SZ_1M*13) -#ifndef __ASSEMBLY__ - -extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, - unsigned int mtype, void *caller); - -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index f944fe65a657..198202c267c8 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -100,8 +100,4 @@ #define MSM_HSUSB_PHYS 0xA3600000 #define MSM_HSUSB_SIZE SZ_1K -#ifndef __ASSEMBLY__ -extern void msm_map_msm7x30_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index a1752c0284fc..800b55767e6b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -50,8 +50,4 @@ #define MSM_DEBUG_UART_PHYS 0x16440000 #endif -#ifndef __ASSEMBLY__ -extern void msm_map_msm8960_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index da77cc1d545d..0faa894729b7 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -122,8 +122,4 @@ #define MSM_SDC4_PHYS 0xA0600000 #define MSM_SDC4_SIZE SZ_4K -#ifndef __ASSEMBLY__ -extern void msm_map_qsd8x50_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 5aed57dc808c..54e12caa8d86 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -67,8 +67,4 @@ #define MSM_DEBUG_UART_PHYS 0x19C40000 #endif -#ifndef __ASSEMBLY__ -extern void msm_map_msm8x60_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b1168850..3cbe74a41d9b 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -29,6 +29,8 @@ #include +#include "common.h" + #define MSM_CHIP_DEVICE(name, chip) { \ .virtual = (unsigned long) MSM_##name##_BASE, \ .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ -- cgit v1.2.3-58-ga151 From c446407c09ce0b339a84931f3d45f3dabb9f0b17 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:58 -0700 Subject: ARM: msm: Add DT support for 8960 Add basic support to boot 8960 with device tree. For now just support a basic machine with a uart device. Signed-off-by: Stephen Boyd [davidb@codeaurora.org: Remove leading zeros] Signed-off-by: David Brown --- arch/arm/boot/dts/msm8960-cdp.dts | 41 ++++++++++++++++++++++++++++++++ arch/arm/mach-msm/Kconfig | 1 + arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/Makefile.boot | 1 + arch/arm/mach-msm/board-dt-8960.c | 49 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 93 insertions(+) create mode 100644 arch/arm/boot/dts/msm8960-cdp.dts create mode 100644 arch/arm/mach-msm/board-dt-8960.c diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts new file mode 100644 index 000000000000..9e621b5ad3dd --- /dev/null +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -0,0 +1,41 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8960 CDP"; + compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x80000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x80000>; + }; + + serial@19c400000 { + compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + }; +}; diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index cd7842794e4b..2e5a27ecbdce 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -56,6 +56,7 @@ config ARCH_MSM8960 select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP + select USE_OF endchoice diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index c4f5169a684d..bc2a3cc8ab8d 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o +obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot index 8de06781c6df..f7d6ae9c3487 100644 --- a/arch/arm/mach-msm/Makefile.boot +++ b/arch/arm/mach-msm/Makefile.boot @@ -3,3 +3,4 @@ params_phys-y := 0x10000100 initrd_phys-y := 0x10800000 dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb +dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c new file mode 100644 index 000000000000..8df99b8f3c92 --- /dev/null +++ b/arch/arm/mach-msm/board-dt-8960.c @@ -0,0 +1,49 @@ +/* Copyright (c) 2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include +#include + +#include "common.h" + +static const struct of_device_id msm_dt_gic_match[] __initconst = { + { .compatible = "qcom,msm-qgic2", .data = gic_of_init }, + { } +}; + +static void __init msm_dt_init_irq(void) +{ + of_irq_init(msm_dt_gic_match); +} + +static void __init msm_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const msm8960_dt_match[] __initconst = { + "qcom,msm8960-cdp", + NULL +}; + +DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)") + .map_io = msm_map_msm8960_io, + .init_irq = msm_dt_init_irq, + .timer = &msm_dt_timer, + .init_machine = msm_dt_init, + .dt_compat = msm8960_dt_match, + .handle_irq = gic_handle_irq, +MACHINE_END -- cgit v1.2.3-58-ga151 From 0607fa5884f1759b396a0e1c07be561515daddc8 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 5 Sep 2012 12:28:59 -0700 Subject: ARM: msm: Remove non-DT targets from 8960 Remove the non-DT targets supported by 8960. This makes 8960 a device tree only target. Signed-off-by: Stephen Boyd Signed-off-by: David Brown --- arch/arm/mach-msm/Kconfig | 13 ----- arch/arm/mach-msm/Makefile | 1 - arch/arm/mach-msm/board-msm8960.c | 110 ------------------------------------ arch/arm/mach-msm/common.h | 1 - arch/arm/mach-msm/devices-msm8960.c | 85 ---------------------------- arch/arm/mach-msm/timer.c | 13 ----- 6 files changed, 223 deletions(-) delete mode 100644 arch/arm/mach-msm/board-msm8960.c delete mode 100644 arch/arm/mach-msm/devices-msm8960.c diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 2e5a27ecbdce..b2740c800e8c 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -50,7 +50,6 @@ config ARCH_MSM8X60 config ARCH_MSM8960 bool "MSM8960" select ARCH_MSM_SCORPIONMP - select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3) select ARM_GIC select CPU_V7 select MSM_V2_TLMM @@ -112,18 +111,6 @@ config MACH_QSD8X50A_ST1_5 help Support for the Qualcomm ST1.5. -config MACH_MSM8960_SIM - depends on ARCH_MSM8960 - bool "MSM8960 Simulator" - help - Support for the Qualcomm MSM8960 simulator. - -config MACH_MSM8960_RUMI3 - depends on ARCH_MSM8960 - bool "MSM8960 RUMI3" - help - Support for the Qualcomm MSM8960 RUMI3 emulator. - endmenu config MSM_SMD_PKG3 diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index bc2a3cc8ab8d..c7720cf53f38 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o -obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c deleted file mode 100644 index fafead236311..000000000000 --- a/arch/arm/mach-msm/board-msm8960.c +++ /dev/null @@ -1,110 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include "devices.h" -#include "common.h" - -static void __init msm8960_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && - tag->u.mem.start == 0x40200000) { - tag->u.mem.start = 0x40000000; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm8960_reserve(void) -{ - memblock_remove(0x40000000, SZ_2M); -} - -static void __init msm8960_map_io(void) -{ - msm_map_msm8960_io(); -} - -static void __init msm8960_init_irq(void) -{ - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); - - if (machine_is_msm8960_rumi3()) - writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); -} - -static struct platform_device *sim_devices[] __initdata = { - &msm8960_device_uart_gsbi2, -}; - -static struct platform_device *rumi3_devices[] __initdata = { - &msm8960_device_uart_gsbi5, -}; - -static void __init msm8960_sim_init(void) -{ - platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices)); -} - -static void __init msm8960_rumi3_init(void) -{ - platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices)); -} - -static void __init msm8960_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") - .fixup = msm8960_fixup, - .reserve = msm8960_reserve, - .map_io = msm8960_map_io, - .init_irq = msm8960_init_irq, - .timer = &msm8960_timer, - .handle_irq = gic_handle_irq, - .init_machine = msm8960_sim_init, - .init_late = msm8960_init_late, -MACHINE_END - -MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") - .fixup = msm8960_fixup, - .reserve = msm8960_reserve, - .map_io = msm8960_map_io, - .init_irq = msm8960_init_irq, - .timer = &msm8960_timer, - .handle_irq = gic_handle_irq, - .init_machine = msm8960_rumi3_init, - .init_late = msm8960_init_late, -MACHINE_END - diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h index 9975575a81b9..d68e5d7854f5 100644 --- a/arch/arm/mach-msm/common.h +++ b/arch/arm/mach-msm/common.h @@ -14,7 +14,6 @@ extern struct sys_timer msm7x01_timer; extern struct sys_timer msm7x30_timer; -extern struct sys_timer msm8960_timer; extern struct sys_timer msm_dt_timer; extern struct sys_timer qsd8x50_timer; diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c deleted file mode 100644 index d9e1f26475de..000000000000 --- a/arch/arm/mach-msm/devices-msm8960.c +++ /dev/null @@ -1,85 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include -#include - -#include -#include -#include - -#include "devices.h" - -#define MSM_GSBI2_PHYS 0x16100000 -#define MSM_UART2DM_PHYS (MSM_GSBI2_PHYS + 0x40000) - -#define MSM_GSBI5_PHYS 0x16400000 -#define MSM_UART5DM_PHYS (MSM_GSBI5_PHYS + 0x40000) - -static struct resource resources_uart_gsbi2[] = { - { - .start = GSBI2_UARTDM_IRQ, - .end = GSBI2_UARTDM_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2DM_PHYS, - .end = MSM_UART2DM_PHYS + PAGE_SIZE - 1, - .name = "uart_resource", - .flags = IORESOURCE_MEM, - }, - { - .start = MSM_GSBI2_PHYS, - .end = MSM_GSBI2_PHYS + PAGE_SIZE - 1, - .name = "gsbi_resource", - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device msm8960_device_uart_gsbi2 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart_gsbi2), - .resource = resources_uart_gsbi2, -}; - -static struct resource resources_uart_gsbi5[] = { - { - .start = GSBI5_UARTDM_IRQ, - .end = GSBI5_UARTDM_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART5DM_PHYS, - .end = MSM_UART5DM_PHYS + PAGE_SIZE - 1, - .name = "uart_resource", - .flags = IORESOURCE_MEM, - }, - { - .start = MSM_GSBI5_PHYS, - .end = MSM_GSBI5_PHYS + PAGE_SIZE - 1, - .name = "gsbi_resource", - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device msm8960_device_uart_gsbi5 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart_gsbi5), - .resource = resources_uart_gsbi5, -}; diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 27ade4f1ee16..7a49195f7a92 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -37,7 +37,6 @@ #define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) #define TIMER_ENABLE_EN BIT(0) #define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x0030 #define DGT_CLK_CTL_DIV_4 0x3 #define GPT_HZ 32768 @@ -346,18 +345,6 @@ struct sys_timer msm7x30_timer = { .init = msm7x30_timer_init }; -static void __init msm8960_timer_init(void) -{ - if (msm_timer_map(0x0200A004, 0x0208A024)) - return; - writel_relaxed(DGT_CLK_CTL_DIV_4, event_base + DGT_CLK_CTL); - msm_timer_init(27000000 / 4, 32, 17, true); -} - -struct sys_timer msm8960_timer = { - .init = msm8960_timer_init -}; - static void __init qsd8x50_timer_init(void) { if (msm_timer_map(0xAC100000, 0xAC100010)) -- cgit v1.2.3-58-ga151 From 8c41d57395ff5b9b16724786c7c4b4c4081510cc Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 13 Sep 2012 13:23:22 +0200 Subject: ARM: dts: mxs: Add ethernetX to macX aliases Add ethernet0 and ethernet1 aliases into the imx28.dtsi file, as that is what most bootloaders use to pass MAC address. The bootloader seeks for this alias and adds "mac-address" and "local-mac-address" properties to the aliased node. This fixes issues with FEC having NULL MAC address when update_fec_mac_prop() wasn't called. And not all boards call update_fec_mac_prop() . Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 03e0fef8e7a7..724147eab84b 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -27,6 +27,8 @@ serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; + ethernet0 = &mac0; + ethernet1 = &mac1; }; cpus { -- cgit v1.2.3-58-ga151 From d6475317b569d531730c07bbc27b29257c348fd0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 13 Sep 2012 14:33:38 -0300 Subject: ARM: dts: mx23: Add USB resources Add USB resources for mx23. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9d0e803e3eca..3f3b6fc229b3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -436,8 +436,10 @@ status = "disabled"; }; - usbphy@8007c000 { + usbphy0: usbphy@8007c000 { + compatible = "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 41>; status = "disabled"; }; }; @@ -450,8 +452,12 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx23-usb", "fsl,imx27-usb"; reg = <0x80080000 0x40000>; + interrupts = <11>; + fsl,usbphy = <&usbphy0>; + clocks = <&clks 40>; status = "disabled"; }; }; -- cgit v1.2.3-58-ga151 From 28342c6113dcfb1c730dff71c7ac0feab5ee2e6a Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 14 Sep 2012 14:42:45 +0800 Subject: ARM: dts: imx6q-sabrelite: add usbmisc device - add usbmisc device - set property fsl,usbmisc for usb controllers - set disable-over-current for imx6q-sabrelite usb otg Signed-off-by: Richard Zhao Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 1 + arch/arm/boot/dts/imx6q.dtsi | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 0fb29ca7a9e1..0cb7dcd63c9e 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -68,6 +68,7 @@ aips-bus@02100000 { /* AIPS2 */ usb@02184000 { /* USB OTG */ vbus-supply = <®_usb_otg_vbus>; + disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e45476dc6d32..b40c0ddd2648 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -777,6 +777,7 @@ interrupts = <0 43 0x04>; clocks = <&clks 162>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -786,6 +787,7 @@ interrupts = <0 40 0x04>; clocks = <&clks 162>; fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -794,6 +796,7 @@ reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -802,9 +805,17 @@ reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks 162>; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; -- cgit v1.2.3-58-ga151 From b493129482851ad34c43db3369b2750fc59aa249 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 17 Sep 2012 10:01:45 -0300 Subject: ARM: dts: imx23-olinuxino: Add USB host support Add USB host support. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23-olinuxino.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 711dcf5742b6..384d8b66f337 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -40,6 +40,7 @@ reg = <0>; fsl,pinmux-ids = < 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -60,6 +61,31 @@ pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */ + gpio = <&gpio0 17 0>; }; }; -- cgit v1.2.3-58-ga151 From 97a53092a148e6c70aabf13835143cc3dd4b524c Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Wed, 19 Sep 2012 11:25:16 +0800 Subject: ARM: dts: imx6q-sabrelite: add usbotg pinctrl support Signed-off-by: Richard Zhao Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-sabrelite.dts | 2 ++ arch/arm/boot/dts/imx6q.dtsi | 8 ++++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 0cb7dcd63c9e..d152328285a1 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -68,6 +68,8 @@ aips-bus@02100000 { /* AIPS2 */ usb@02184000 { /* USB OTG */ vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index b40c0ddd2648..35e5895ba3df 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -661,6 +661,14 @@ }; }; + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { + fsl,pins = < + 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ + >; + }; + }; + usdhc2 { pinctrl_usdhc2_1: usdhc2grp-1 { fsl,pins = < -- cgit v1.2.3-58-ga151 From cc7887c3b1a08d3900160d93df4ddda5fa7f725b Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Mon, 10 Sep 2012 15:17:56 +0800 Subject: ARM: imx6q: use pll2_pfd2_396m as the enfc_sel's parent The gpmi-nand driver can support the ONFI nand chip's EDO (extra data out) mode in the asynchrounous mode. In the asynchrounous mode 5, the gpmi needs 100MHz clock for the IO. But with the pll2_pfd0_352m, we can not get the 100MHz clock. So choose pll2_pfd2_396m as enfc_sel's parent. Signed-off-by: Huang Shijie Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index bbc71f57b92b..744327fc5e2b 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -404,6 +404,13 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); + /* + * The gpmi needs 100MHz frequency in the EDO/Sync mode, + * We can not get the 100MHz from the pll2_pfd0_352m. + * So choose pll2_pfd2_396m as enfc_sel's parent. + */ + clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]); + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); -- cgit v1.2.3-58-ga151 From fa6d79d27614223d82418023b7f5300f1a1530d3 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 13 Aug 2012 14:24:24 +0530 Subject: ARM: OMAP: Add initialisation for the real-time counter. The real time counter also called master counter, is a free-running counter. It produces the count used by the CPU local timer peripherals in the MPU cluster. The timer counts at a rate of 6.144 MHz. The ratio registers needs to be configured based on system clock only onetime. After initialisation, hardware takes care of adjusting the clock in different low power modes to keep counter rate constant. Signed-off-by: Santosh Shilimkar --- arch/arm/mach-omap2/Kconfig | 4 ++ arch/arm/mach-omap2/timer.c | 90 ++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 93 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 346fd26f3aa6..4b773fd56978 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,9 @@ config ARCH_OMAP2PLUS_TYPICAL config SOC_HAS_OMAP2_SDRC bool "OMAP2 SDRAM Controller support" +config SOC_HAS_REALTIME_COUNTER + bool "Real time free running counter" + config ARCH_OMAP2 bool "TI OMAP2" depends on ARCH_OMAP2PLUS @@ -70,6 +73,7 @@ config SOC_OMAP5 select ARM_GIC select HAVE_SMP select ARM_CPU_SUSPEND if PM + select SOC_HAS_REALTIME_COUNTER comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ba4f57dda86..026fcfff6698 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -69,6 +69,11 @@ #define OMAP3_SECURE_TIMER 1 #endif +#define REALTIME_COUNTER_BASE 0x48243200 +#define INCREMENTER_NUMERATOR_OFFSET 0x10 +#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 +#define NUMERATOR_DENUMERATOR_MASK 0xfffff000 + /* Clockevent code */ static struct omap_dm_timer clkev; @@ -346,6 +351,84 @@ static void __init omap2_clocksource_init(int gptimer_id, omap2_gptimer_clocksource_init(gptimer_id, fck_source); } +#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER +/* + * The realtime counter also called master counter, is a free-running + * counter, which is related to real time. It produces the count used + * by the CPU local timer peripherals in the MPU cluster. The timer counts + * at a rate of 6.144 MHz. Because the device operates on different clocks + * in different power modes, the master counter shifts operation between + * clocks, adjusting the increment per clock in hardware accordingly to + * maintain a constant count rate. + */ +static void __init realtime_counter_init(void) +{ + void __iomem *base; + static struct clk *sys_clk; + unsigned long rate; + unsigned int reg, num, den; + + base = ioremap(REALTIME_COUNTER_BASE, SZ_32); + if (!base) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + sys_clk = clk_get(NULL, "sys_clkin_ck"); + if (!sys_clk) { + pr_err("%s: failed to get system clock handle\n", __func__); + iounmap(base); + return; + } + + rate = clk_get_rate(sys_clk); + /* Numerator/denumerator values refer TRM Realtime Counter section */ + switch (rate) { + case 1200000: + num = 64; + den = 125; + break; + case 1300000: + num = 768; + den = 1625; + break; + case 19200000: + num = 8; + den = 25; + break; + case 2600000: + num = 384; + den = 1625; + break; + case 2700000: + num = 256; + den = 1125; + break; + case 38400000: + default: + /* Program it for 38.4 MHz */ + num = 4; + den = 25; + break; + } + + /* Program numerator and denumerator registers */ + reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & + NUMERATOR_DENUMERATOR_MASK; + reg |= num; + __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); + + reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & + NUMERATOR_DENUMERATOR_MASK; + reg |= den; + __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); + + iounmap(base); +} +#else +static inline void __init realtime_counter_init(void) +{} +#endif + #define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ clksrc_nr, clksrc_src) \ static void __init omap##name##_timer_init(void) \ @@ -403,7 +486,12 @@ OMAP_SYS_TIMER(4) #endif #ifdef CONFIG_SOC_OMAP5 -OMAP_SYS_TIMER_INIT(5, 1, OMAP4_CLKEV_SOURCE, 2, OMAP4_MPU_SOURCE) +static void __init omap5_timer_init(void) +{ + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_clocksource_init(2, OMAP4_MPU_SOURCE); + realtime_counter_init(); +} OMAP_SYS_TIMER(5) #endif -- cgit v1.2.3-58-ga151 From 3c7c5dab44d6c8861bc86dab924353d8d40344f8 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Mon, 13 Aug 2012 14:39:03 +0530 Subject: ARM: OMAP5: Enable arch timer support Enable Cortex A15 generic timer support for OMAP5 based SOCs. The CPU local timers run on the free running real time counter clock. Acked-by: Benoit Cousson Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/omap5.dtsi | 12 ++++++++++++ arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/timer.c | 7 +++++++ 3 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 57e527083746..7b986eddd0b9 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -33,9 +33,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; cpu@1 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; }; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4b773fd56978..4609163b0395 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -74,6 +74,7 @@ config SOC_OMAP5 select HAVE_SMP select ARM_CPU_SUSPEND if PM select SOC_HAS_REALTIME_COUNTER + select ARM_ARCH_TIMER comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 026fcfff6698..2c5a45d8ca8c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "common.h" #include #include @@ -488,9 +489,15 @@ OMAP_SYS_TIMER(4) #ifdef CONFIG_SOC_OMAP5 static void __init omap5_timer_init(void) { + int err; + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); omap2_clocksource_init(2, OMAP4_MPU_SOURCE); realtime_counter_init(); + + err = arch_timer_of_register(); + if (err) + pr_err("%s: arch_timer_register failed %d\n", __func__, err); } OMAP_SYS_TIMER(5) #endif -- cgit v1.2.3-58-ga151 From 7aff3fba8437438a86e6debe2429cd12a69b05d0 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 19 Sep 2012 00:37:17 +0200 Subject: ARM: mxs: m28evk: Disable OCOTP OUI loading Don't load the FEC MAC address from OCOTP, but use the one supplied via device tree by U-Boot. This is the preferred way, every DT-capable bootloader does set up "mac-address" and "local-mac-address" properties into the DT passed to the kernel. Signed-off-by: Marek Vasut Cc: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-mxs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 5cbb6376c685..433af893ad8a 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -288,8 +288,6 @@ static void __init imx28_evk_post_init(void) static void __init m28evk_init(void) { - update_fec_mac_prop(OUI_DENX); - mxsfb_pdata.mode_list = m28evk_video_modes; mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes); mxsfb_pdata.default_bpp = 16; -- cgit v1.2.3-58-ga151 From b37ed4a3e561db09549ce16e9f572e6f204315f7 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 11 Sep 2012 13:13:05 -0600 Subject: ARM: dt: tegra: whistler: configure power off Add DT property to tell the MAX8907 that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-whistler.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 4ae1e5dcfa62..c636d002d6d8 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -267,6 +267,8 @@ reg = <0x3c>; interrupts = <0 86 0x4>; + maxim,system-power-controller; + mbatt-supply = <&usb0_vbus_reg>; in-v1-supply = <&mbatt_reg>; in-v2-supply = <&mbatt_reg>; -- cgit v1.2.3-58-ga151 From 5ca032ee21cdabd08fb368ce3f02fa8906b0ef5f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 14 Sep 2012 16:16:08 +0100 Subject: ASoC: Ux500: Move MSP pinctrl setup into the MSP driver In the initial submission of the MSP driver msp1 and msp3's associated pinctrl mechanism was passed back to platform code using a plat_init() call-back routine, but it has no place in platform code. The MSP driver should set this up for the appropriate ports. Instead we use a use_pinctrl identifier which is passed from platform_data/Device Tree which indicates which ports should use pinctrl. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 79 +--------------------------------- arch/arm/mach-ux500/include/mach/msp.h | 2 - sound/soc/ux500/ux500_msp_i2s.c | 67 +++++++++++++++++++++------- sound/soc/ux500/ux500_msp_i2s.h | 8 +++- 4 files changed, 58 insertions(+), 98 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index df15646036aa..ace6c051bc1a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include @@ -23,53 +22,6 @@ #include "devices-db8500.h" #include "pins-db8500.h" -/* MSP1/3 Tx/Rx usage protection */ -static DEFINE_SPINLOCK(msp_rxtx_lock); - -/* Reference Count */ -static int msp_rxtx_ref; - -/* Pin modes */ -struct pinctrl *msp1_p; -struct pinctrl_state *msp1_def; -struct pinctrl_state *msp1_sleep; - -int msp13_i2s_init(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) { - retval = pinctrl_select_state(msp1_p, msp1_def); - if (retval) - pr_err("could not set MSP1 defstate\n"); - } - if (!retval) - msp_rxtx_ref++; - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - -int msp13_i2s_exit(void) -{ - int retval = 0; - unsigned long flags; - - spin_lock_irqsave(&msp_rxtx_lock, flags); - WARN_ON(!msp_rxtx_ref); - msp_rxtx_ref--; - if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) { - retval = pinctrl_select_state(msp1_p, msp1_sleep); - if (retval) - pr_err("could not set MSP1 sleepstate\n"); - } - spin_unlock_irqrestore(&msp_rxtx_lock, flags); - - return retval; -} - static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, .dir = STEDMA40_PERIPH_TO_MEM, @@ -132,8 +84,6 @@ static struct msp_i2s_platform_data msp1_platform_data = { .id = MSP_I2S_1, .msp_i2s_dma_rx = NULL, .msp_i2s_dma_tx = &msp1_dma_tx, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, }; static struct stedma40_chan_cfg msp2_dma_rx = { @@ -219,49 +169,22 @@ static struct msp_i2s_platform_data msp3_platform_data = { .id = MSP_I2S_3, .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, - .msp_i2s_init = msp13_i2s_init, - .msp_i2s_exit = msp13_i2s_exit, }; int mop500_msp_init(struct device *parent) { - struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, &msp0_platform_data); - msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, &msp1_platform_data); db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, &msp2_platform_data); db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, &msp3_platform_data); - /* Get the pinctrl handle for MSP1 */ - if (msp1) { - msp1_p = pinctrl_get(&msp1->dev); - if (IS_ERR(msp1_p)) - dev_err(&msp1->dev, "could not get MSP1 pinctrl\n"); - else { - msp1_def = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(msp1_def)) { - dev_err(&msp1->dev, - "could not get MSP1 defstate\n"); - } - msp1_sleep = pinctrl_lookup_state(msp1_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(msp1_sleep)) - dev_err(&msp1->dev, - "could not get MSP1 idlestate\n"); - } - } - - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); - return 0; } diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h index 798be19129ef..3cc7142eee02 100644 --- a/arch/arm/mach-ux500/include/mach/msp.h +++ b/arch/arm/mach-ux500/include/mach/msp.h @@ -22,8 +22,6 @@ struct msp_i2s_platform_data { enum msp_i2s_id id; struct stedma40_chan_cfg *msp_i2s_dma_rx; struct stedma40_chan_cfg *msp_i2s_dma_tx; - int (*msp_i2s_init) (void); - int (*msp_i2s_exit) (void); }; #endif diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index eb85113d472a..12d7f567420d 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -15,6 +15,7 @@ #include #include +#include #include #include @@ -25,6 +26,9 @@ #include "ux500_msp_i2s.h" +/* MSP1/3 Tx/Rx usage protection */ +static DEFINE_SPINLOCK(msp_rxtx_lock); + /* Protocol desciptors */ static const struct msp_protdesc prot_descs[] = { { /* I2S */ @@ -352,17 +356,23 @@ static int configure_multichannel(struct ux500_msp *msp, static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config) { - int status = 0; + int status = 0, retval = 0; u32 reg_val_DMACR, reg_val_GCR; + unsigned long flags; /* Check msp state whether in RUN or CONFIGURED Mode */ - if ((msp->msp_state == MSP_STATE_IDLE) && (msp->plat_init)) { - status = msp->plat_init(); - if (status) { - dev_err(msp->dev, "%s: ERROR: Failed to init MSP (%d)!\n", - __func__, status); - return status; + if (msp->msp_state == MSP_STATE_IDLE) { + spin_lock_irqsave(&msp_rxtx_lock, flags); + if (msp->pinctrl_rxtx_ref == 0 && + !(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_def))) { + retval = pinctrl_select_state(msp->pinctrl_p, + msp->pinctrl_def); + if (retval) + pr_err("could not set MSP defstate\n"); } + if (!retval) + msp->pinctrl_rxtx_ref++; + spin_unlock_irqrestore(&msp_rxtx_lock, flags); } /* Configure msp with protocol dependent settings */ @@ -620,7 +630,8 @@ int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction) int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir) { - int status = 0; + int status = 0, retval = 0; + unsigned long flags; dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir); @@ -631,12 +642,19 @@ int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir) writel((readl(msp->registers + MSP_GCR) & (~(FRAME_GEN_ENABLE | SRG_ENABLE))), msp->registers + MSP_GCR); - if (msp->plat_exit) - status = msp->plat_exit(); - if (status) - dev_warn(msp->dev, - "%s: WARN: ux500_msp_i2s_exit failed (%d)!\n", - __func__, status); + + spin_lock_irqsave(&msp_rxtx_lock, flags); + WARN_ON(!msp->pinctrl_rxtx_ref); + msp->pinctrl_rxtx_ref--; + if (msp->pinctrl_rxtx_ref == 0 && + !(IS_ERR(msp->pinctrl_p) || IS_ERR(msp->pinctrl_sleep))) { + retval = pinctrl_select_state(msp->pinctrl_p, + msp->pinctrl_sleep); + if (retval) + pr_err("could not set MSP sleepstate\n"); + } + spin_unlock_irqrestore(&msp_rxtx_lock, flags); + writel(0, msp->registers + MSP_GCR); writel(0, msp->registers + MSP_TCF); writel(0, msp->registers + MSP_RCF); @@ -675,8 +693,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, msp->id = platform_data->id; msp->dev = &pdev->dev; - msp->plat_init = platform_data->msp_i2s_init; - msp->plat_exit = platform_data->msp_i2s_exit; msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx; msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx; @@ -713,6 +729,25 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, dev_dbg(&pdev->dev, "I2S device-name: '%s'\n", i2s_cont->name); msp->i2s_cont = i2s_cont; + msp->pinctrl_p = pinctrl_get(msp->dev); + if (IS_ERR(msp->pinctrl_p)) + dev_err(&pdev->dev, "could not get MSP pinctrl\n"); + else { + msp->pinctrl_def = pinctrl_lookup_state(msp->pinctrl_p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(msp->pinctrl_def)) { + dev_err(&pdev->dev, + "could not get MSP defstate (%li)\n", + PTR_ERR(msp->pinctrl_def)); + } + msp->pinctrl_sleep = pinctrl_lookup_state(msp->pinctrl_p, + PINCTRL_STATE_SLEEP); + if (IS_ERR(msp->pinctrl_sleep)) + dev_err(&pdev->dev, + "could not get MSP idlestate (%li)\n", + PTR_ERR(msp->pinctrl_def)); + } + return 0; } diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h index 2d9136da9865..1311c0df7628 100644 --- a/sound/soc/ux500/ux500_msp_i2s.h +++ b/sound/soc/ux500/ux500_msp_i2s.h @@ -524,14 +524,18 @@ struct ux500_msp { struct dma_chan *rx_pipeid; enum msp_state msp_state; int (*transfer) (struct ux500_msp *msp, struct i2s_message *message); - int (*plat_init) (void); - int (*plat_exit) (void); struct timer_list notify_timer; int def_elem_len; unsigned int dir_busy; int loopback_enable; u32 backup_regs[MAX_MSP_BACKUP_REGS]; unsigned int f_bitclk; + /* Pin modes */ + struct pinctrl *pinctrl_p; + struct pinctrl_state *pinctrl_def; + struct pinctrl_state *pinctrl_sleep; + /* Reference Count */ + int pinctrl_rxtx_ref; }; struct ux500_msp_dma_params { -- cgit v1.2.3-58-ga151 From 0af541ce47ee4e80393dda12109a1efaf757fdcd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 26 Jul 2012 16:48:34 +0100 Subject: ASoC: Ux500: Enable MOP500 driver for Device Tree Here we ensure that the MOP500 audio driver will be probed during a Device Tree boot. We also parse the sound node to link together the codec, dma and the CPU-side Digital Audio Interface. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- sound/soc/ux500/mop500.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 31c4d26d0359..6840df79d798 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -56,8 +57,35 @@ static struct snd_soc_card mop500_card = { .num_links = ARRAY_SIZE(mop500_dai_links), }; +static int __devinit mop500_of_probe(struct platform_device *pdev, + struct device_node *np) +{ + struct device_node *codec_np, *msp_np[2]; + int i; + + msp_np[0] = of_parse_phandle(np, "stericsson,cpu-dai", 0); + msp_np[1] = of_parse_phandle(np, "stericsson,cpu-dai", 1); + codec_np = of_parse_phandle(np, "stericsson,audio-codec", 0); + + if (!(msp_np[0] && msp_np[1] && codec_np)) { + dev_err(&pdev->dev, "Phandle missing or invalid\n"); + return -EINVAL; + } + + for (i = 0; i < 2; i++) { + mop500_dai_links[i].cpu_of_node = msp_np[i]; + mop500_dai_links[i].cpu_dai_name = NULL; + mop500_dai_links[i].codec_of_node = codec_np; + mop500_dai_links[i].codec_name = NULL; + } + + snd_soc_of_parse_card_name(&mop500_card, "stericsson,card-name"); + + return 0; +} static int __devinit mop500_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; int ret; pr_debug("%s: Enter.\n", __func__); @@ -66,6 +94,12 @@ static int __devinit mop500_probe(struct platform_device *pdev) mop500_card.dev = &pdev->dev; + if (np) { + ret = mop500_of_probe(pdev, np); + if (ret) + return ret; + } + dev_dbg(&pdev->dev, "%s: Card %s: Set platform drvdata.\n", __func__, mop500_card.name); platform_set_drvdata(pdev, &mop500_card); @@ -101,10 +135,16 @@ static int __devexit mop500_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id snd_soc_mop500_match[] = { + { .compatible = "stericsson,snd-soc-mop500", }, + {}, +}; + static struct platform_driver snd_soc_mop500_driver = { .driver = { .owner = THIS_MODULE, .name = "snd-soc-mop500", + .of_match_table = snd_soc_mop500_match, }, .probe = mop500_probe, .remove = __devexit_p(mop500_remove), -- cgit v1.2.3-58-ga151 From 49731c23bee88fd76af8cd57b915547b2175a26a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 26 Jul 2012 17:07:26 +0100 Subject: ASoC: Ux500: Enable ux500 MSP driver for Device Tree Register both parts of the MSP driver from Device Tree so that they are probed when Device Tree is enabled. Also, as there is platform data involved, we ensure that there is allocated memory to place the configuration into and that the correct information is extracted from the DT binary. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- sound/soc/ux500/ux500_msp_dai.c | 6 ++++++ sound/soc/ux500/ux500_msp_i2s.c | 22 +++++++++++++++++++--- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/sound/soc/ux500/ux500_msp_dai.c b/sound/soc/ux500/ux500_msp_dai.c index 057e28ef770e..45e43b4057b0 100644 --- a/sound/soc/ux500/ux500_msp_dai.c +++ b/sound/soc/ux500/ux500_msp_dai.c @@ -830,10 +830,16 @@ static int __devexit ux500_msp_drv_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id ux500_msp_i2s_match[] = { + { .compatible = "stericsson,ux500-msp-i2s", }, + {}, +}; + static struct platform_driver msp_i2s_driver = { .driver = { .name = "ux500-msp-i2s", .owner = THIS_MODULE, + .of_match_table = ux500_msp_i2s_match, }, .probe = ux500_msp_drv_probe, .remove = ux500_msp_drv_remove, diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index 12d7f567420d..e5c79ca42518 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -683,14 +684,29 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, { struct resource *res = NULL; struct i2s_controller *i2s_cont; + struct device_node *np = pdev->dev.of_node; struct ux500_msp *msp; - dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, - pdev->name, platform_data->id); - *msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL); msp = *msp_p; + if (np) { + if (!platform_data) { + platform_data = devm_kzalloc(&pdev->dev, + sizeof(struct msp_i2s_platform_data), GFP_KERNEL); + if (!platform_data) + ret = -ENOMEM; + } + } else + if (!platform_data) + ret = -EINVAL; + + if (ret) + goto err_res; + + dev_dbg(&pdev->dev, "%s: Enter (name: %s, id: %d).\n", __func__, + pdev->name, platform_data->id); + msp->id = platform_data->id; msp->dev = &pdev->dev; msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx; -- cgit v1.2.3-58-ga151 From db5c811d4044b5bd2ef923c7466bd2720eee0887 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 27 Jul 2012 08:50:05 +0100 Subject: ASoC: codecs: Enable AB8500 CODEC for Device Tree We continue to allow the AB8500 CODEC to be registered via the AB8500 Multi Functional Device API, only this time we extract its configuration from the Device Tree binary. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- include/linux/mfd/abx500/ab8500-codec.h | 6 ++- sound/soc/codecs/ab8500-codec.c | 81 +++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+), 2 deletions(-) diff --git a/include/linux/mfd/abx500/ab8500-codec.h b/include/linux/mfd/abx500/ab8500-codec.h index dc6529202cdd..d7079413def0 100644 --- a/include/linux/mfd/abx500/ab8500-codec.h +++ b/include/linux/mfd/abx500/ab8500-codec.h @@ -23,7 +23,8 @@ enum amic_type { /* Mic-biases */ enum amic_micbias { AMIC_MICBIAS_VAMIC1, - AMIC_MICBIAS_VAMIC2 + AMIC_MICBIAS_VAMIC2, + AMIC_MICBIAS_UNKNOWN }; /* Bias-voltage */ @@ -31,7 +32,8 @@ enum ear_cm_voltage { EAR_CMV_0_95V, EAR_CMV_1_10V, EAR_CMV_1_27V, - EAR_CMV_1_58V + EAR_CMV_1_58V, + EAR_CMV_UNKNOWN }; /* Analog microphone settings */ diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c index 23b40186f9b8..07abd09e0b1d 100644 --- a/sound/soc/codecs/ab8500-codec.c +++ b/sound/soc/codecs/ab8500-codec.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include @@ -2394,9 +2395,65 @@ struct snd_soc_dai_driver ab8500_codec_dai[] = { } }; +static void ab8500_codec_of_probe(struct device *dev, struct device_node *np, + struct ab8500_codec_platform_data *codec) +{ + u32 value; + + if (of_get_property(np, "stericsson,amic1-type-single-ended", NULL)) + codec->amics.mic1_type = AMIC_TYPE_SINGLE_ENDED; + else + codec->amics.mic1_type = AMIC_TYPE_DIFFERENTIAL; + + if (of_get_property(np, "stericsson,amic2-type-single-ended", NULL)) + codec->amics.mic2_type = AMIC_TYPE_SINGLE_ENDED; + else + codec->amics.mic2_type = AMIC_TYPE_DIFFERENTIAL; + + /* Has a non-standard Vamic been requested? */ + if (of_get_property(np, "stericsson,amic1a-bias-vamic2", NULL)) + codec->amics.mic1a_micbias = AMIC_MICBIAS_VAMIC2; + else + codec->amics.mic1a_micbias = AMIC_MICBIAS_VAMIC1; + + if (of_get_property(np, "stericsson,amic1b-bias-vamic2", NULL)) + codec->amics.mic1b_micbias = AMIC_MICBIAS_VAMIC2; + else + codec->amics.mic1b_micbias = AMIC_MICBIAS_VAMIC1; + + if (of_get_property(np, "stericsson,amic2-bias-vamic1", NULL)) + codec->amics.mic2_micbias = AMIC_MICBIAS_VAMIC1; + else + codec->amics.mic2_micbias = AMIC_MICBIAS_VAMIC2; + + if (!of_property_read_u32(np, "stericsson,earpeice-cmv", &value)) { + switch (value) { + case 950 : + codec->ear_cmv = EAR_CMV_0_95V; + break; + case 1100 : + codec->ear_cmv = EAR_CMV_1_10V; + break; + case 1270 : + codec->ear_cmv = EAR_CMV_1_27V; + break; + case 1580 : + codec->ear_cmv = EAR_CMV_1_58V; + break; + default : + codec->ear_cmv = EAR_CMV_UNKNOWN; + dev_err(dev, "Unsuitable earpiece voltage found in DT\n"); + } + } else { + dev_warn(dev, "No earpiece voltage found in DT - using default\n"); + codec->ear_cmv = EAR_CMV_0_95V; + } +} + static int ab8500_codec_probe(struct snd_soc_codec *codec) { struct device *dev = codec->dev; + struct device_node *np = dev->of_node; struct ab8500_codec_drvdata *drvdata = dev_get_drvdata(dev); struct ab8500_platform_data *pdata; struct filter_control *fc; @@ -2410,6 +2467,30 @@ static int ab8500_codec_probe(struct snd_soc_codec *codec) /* Inform SoC Core that we have our own I/O arrangements. */ codec->control_data = (void *)true; + if (np) { + if (!pdata) + pdata = devm_kzalloc(dev, + sizeof(struct ab8500_platform_data), + GFP_KERNEL); + + if (pdata && !pdata->codec) + pdata->codec + = devm_kzalloc(dev, + sizeof(struct ab8500_codec_platform_data), + GFP_KERNEL); + + if (!(pdata && pdata->codec)) + return -ENOMEM; + + ab8500_codec_of_probe(dev, np, pdata->codec); + + } else { + if (!(pdata && pdata->codec)) { + dev_err(dev, "No codec platform data or DT found\n"); + return -EINVAL; + } + } + status = ab8500_audio_setup_mics(codec, &pdata->codec->amics); if (status < 0) { pr_err("%s: Failed to setup mics (%d)!\n", __func__, status); -- cgit v1.2.3-58-ga151 From 2087a692a54947ef5688d096e398111a25356692 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 21 Aug 2012 10:06:44 +0100 Subject: ASoC: Ux500: Minor coding layout changes Includes removal of duplicate debug print affirming entry into the probe function, an unnecessary line break of a coding line <80 chars and a white space change (unintentional tab). Acked-by: Ola Lilja Signed-off-by: Lee Jones --- sound/soc/ux500/mop500.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/soc/ux500/mop500.c b/sound/soc/ux500/mop500.c index 6840df79d798..356611d9654d 100644 --- a/sound/soc/ux500/mop500.c +++ b/sound/soc/ux500/mop500.c @@ -88,8 +88,6 @@ static int __devinit mop500_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; int ret; - pr_debug("%s: Enter.\n", __func__); - dev_dbg(&pdev->dev, "%s: Enter.\n", __func__); mop500_card.dev = &pdev->dev; @@ -117,8 +115,7 @@ static int __devinit mop500_probe(struct platform_device *pdev) ret = snd_soc_register_card(&mop500_card); if (ret) dev_err(&pdev->dev, - "Error: snd_soc_register_card failed (%d)!\n", - ret); + "Error: snd_soc_register_card failed (%d)!\n", ret); return ret; } @@ -131,7 +128,7 @@ static int __devexit mop500_remove(struct platform_device *pdev) snd_soc_unregister_card(mop500_card); mop500_ab8500_remove(mop500_card); - + return 0; } -- cgit v1.2.3-58-ga151 From bfde5afa0804b690224b9be3e44b2ce78ce6e32f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 11:56:51 +0100 Subject: Documentation: Define the MOP500 Audio Machine Driver Device Tree bindings Here we add the required documentation for the new Device Tree bindings pertaining to the MOP500 Audio Machine driver. Acked-by: Ola Lilja Signed-off-by: Lee Jones --- .../devicetree/bindings/sound/ux500-mop500.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ux500-mop500.txt diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt new file mode 100644 index 000000000000..48e071c96b46 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt @@ -0,0 +1,39 @@ +* MOP500 Audio Machine Driver + +This node is responsible for linking together all ux500 Audio Driver components. + +Required properties: + - compatible : "stericsson,snd-soc-mop500" + +Non-standard properties: + - stericsson,cpu-dai : Phandle to the CPU-side DAI + - stericsson,audio-codec : Phandle to the Audio CODEC + - stericsson,card-name : Over-ride default card name + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; -- cgit v1.2.3-58-ga151 From b4cad7af6665743647f28119b689e1552326d4da Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 11:59:21 +0100 Subject: Documentation: Define the MSP Driver Device Tree bindings Here we add the required documentation for the new Device Tree bindings pertaining to the MSP CPU-side DAI Driver. Acked-by: Ola Lilja Signed-off-by: Lee Jones --- .../devicetree/bindings/sound/ux500-msp.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ux500-msp.txt diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt new file mode 100644 index 000000000000..99acd9c774e1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt @@ -0,0 +1,43 @@ +* ux500 MSP (CPU-side Digital Audio Interface) + +Required properties: + - compatible :"stericsson,ux500-msp-i2s" + - reg : Physical base address and length of the device's registers. + +Optional properties: + - interrupts : The interrupt output from the device. + - interrupt-parent : The parent interrupt controller. + - -supply : Phandle to the regulator supply + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,platform-pcm-dma = <&pcm>; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + pcm: ux500-pcm { + compatible = "stericsson,ux500-pcm"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; -- cgit v1.2.3-58-ga151 From d582cb0bef9d9556ba2a06b2fb9c3ebb5274668c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 30 Jul 2012 09:34:46 +0100 Subject: ARM: ux500: Rename db8500.dtsi to dbx5x0.dtsi to encompass the u9500, u8540 and u9540 Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/db8500.dtsi | 592 ----------------------------------------- arch/arm/boot/dts/dbx5x0.dtsi | 592 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/snowball.dts | 2 +- 3 files changed, 593 insertions(+), 593 deletions(-) delete mode 100644 arch/arm/boot/dts/db8500.dtsi create mode 100644 arch/arm/boot/dts/dbx5x0.dtsi diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi deleted file mode 100644 index 3180a9c588b9..000000000000 --- a/arch/arm/boot/dts/db8500.dtsi +++ /dev/null @@ -1,592 +0,0 @@ -/* - * Copyright 2012 Linaro Ltd - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -/include/ "skeleton.dtsi" - -/ { - soc-u9500 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "stericsson,db8500"; - interrupt-parent = <&intc>; - ranges; - - intc: interrupt-controller@a0411000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xa0411000 0x1000>, - <0xa0410100 0x100>; - }; - - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0xa0412000 0x1000>; - interrupts = <0 13 4>; - cache-unified; - cache-level = <2>; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 7 0x4>; - }; - - timer@a0410600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0xa0410600 0x20>; - interrupts = <1 13 0x304>; - }; - - rtc@80154000 { - compatible = "arm,rtc-pl031", "arm,primecell"; - reg = <0x80154000 0x1000>; - interrupts = <0 18 0x4>; - }; - - gpio0: gpio@8012e000 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8012e000 0x80>; - interrupts = <0 119 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <0>; - }; - - gpio1: gpio@8012e080 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8012e080 0x80>; - interrupts = <0 120 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <1>; - }; - - gpio2: gpio@8000e000 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8000e000 0x80>; - interrupts = <0 121 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <2>; - }; - - gpio3: gpio@8000e080 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8000e080 0x80>; - interrupts = <0 122 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <3>; - }; - - gpio4: gpio@8000e100 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8000e100 0x80>; - interrupts = <0 123 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <4>; - }; - - gpio5: gpio@8000e180 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8000e180 0x80>; - interrupts = <0 124 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <5>; - }; - - gpio6: gpio@8011e000 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8011e000 0x80>; - interrupts = <0 125 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <6>; - }; - - gpio7: gpio@8011e080 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0x8011e080 0x80>; - interrupts = <0 126 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <7>; - }; - - gpio8: gpio@a03fe000 { - compatible = "stericsson,db8500-gpio", - "st,nomadik-gpio"; - reg = <0xa03fe000 0x80>; - interrupts = <0 127 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - st,supports-sleepmode; - gpio-controller; - #gpio-cells = <2>; - gpio-bank = <8>; - }; - - pinctrl { - compatible = "stericsson,nmk_pinctrl"; - }; - - usb@a03e0000 { - compatible = "stericsson,db8500-musb", - "mentor,musb"; - reg = <0xa03e0000 0x10000>; - interrupts = <0 23 0x4>; - }; - - dma-controller@801C0000 { - compatible = "stericsson,db8500-dma40", - "stericsson,dma40"; - reg = <0x801C0000 0x1000 0x40010000 0x800>; - interrupts = <0 25 0x4>; - }; - - prcmu@80157000 { - compatible = "stericsson,db8500-prcmu"; - reg = <0x80157000 0x1000>; - interrupts = <0 47 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - prcmu-timer-4@80157450 { - compatible = "stericsson,db8500-prcmu-timer-4"; - reg = <0x80157450 0xC>; - }; - - db8500-prcmu-regulators { - compatible = "stericsson,db8500-prcmu-regulator"; - - // DB8500_REGULATOR_VAPE - db8500_vape_reg: db8500_vape { - regulator-compatible = "db8500_vape"; - regulator-name = "db8500-vape"; - regulator-always-on; - }; - - // DB8500_REGULATOR_VARM - db8500_varm_reg: db8500_varm { - regulator-compatible = "db8500_varm"; - regulator-name = "db8500-varm"; - }; - - // DB8500_REGULATOR_VMODEM - db8500_vmodem_reg: db8500_vmodem { - regulator-compatible = "db8500_vmodem"; - regulator-name = "db8500-vmodem"; - }; - - // DB8500_REGULATOR_VPLL - db8500_vpll_reg: db8500_vpll { - regulator-compatible = "db8500_vpll"; - regulator-name = "db8500-vpll"; - }; - - // DB8500_REGULATOR_VSMPS1 - db8500_vsmps1_reg: db8500_vsmps1 { - regulator-compatible = "db8500_vsmps1"; - regulator-name = "db8500-vsmps1"; - }; - - // DB8500_REGULATOR_VSMPS2 - db8500_vsmps2_reg: db8500_vsmps2 { - regulator-compatible = "db8500_vsmps2"; - regulator-name = "db8500-vsmps2"; - }; - - // DB8500_REGULATOR_VSMPS3 - db8500_vsmps3_reg: db8500_vsmps3 { - regulator-compatible = "db8500_vsmps3"; - regulator-name = "db8500-vsmps3"; - }; - - // DB8500_REGULATOR_VRF1 - db8500_vrf1_reg: db8500_vrf1 { - regulator-compatible = "db8500_vrf1"; - regulator-name = "db8500-vrf1"; - }; - - // DB8500_REGULATOR_SWITCH_SVAMMDSP - db8500_sva_mmdsp_reg: db8500_sva_mmdsp { - regulator-compatible = "db8500_sva_mmdsp"; - regulator-name = "db8500-sva-mmdsp"; - }; - - // DB8500_REGULATOR_SWITCH_SVAMMDSPRET - db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { - regulator-compatible = "db8500_sva_mmdsp_ret"; - regulator-name = "db8500-sva-mmdsp-ret"; - }; - - // DB8500_REGULATOR_SWITCH_SVAPIPE - db8500_sva_pipe_reg: db8500_sva_pipe { - regulator-compatible = "db8500_sva_pipe"; - regulator-name = "db8500_sva_pipe"; - }; - - // DB8500_REGULATOR_SWITCH_SIAMMDSP - db8500_sia_mmdsp_reg: db8500_sia_mmdsp { - regulator-compatible = "db8500_sia_mmdsp"; - regulator-name = "db8500_sia_mmdsp"; - }; - - // DB8500_REGULATOR_SWITCH_SIAMMDSPRET - db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; - }; - - // DB8500_REGULATOR_SWITCH_SIAPIPE - db8500_sia_pipe_reg: db8500_sia_pipe { - regulator-compatible = "db8500_sia_pipe"; - regulator-name = "db8500-sia-pipe"; - }; - - // DB8500_REGULATOR_SWITCH_SGA - db8500_sga_reg: db8500_sga { - regulator-compatible = "db8500_sga"; - regulator-name = "db8500-sga"; - vin-supply = <&db8500_vape_reg>; - }; - - // DB8500_REGULATOR_SWITCH_B2R2_MCDE - db8500_b2r2_mcde_reg: db8500_b2r2_mcde { - regulator-compatible = "db8500_b2r2_mcde"; - regulator-name = "db8500-b2r2-mcde"; - vin-supply = <&db8500_vape_reg>; - }; - - // DB8500_REGULATOR_SWITCH_ESRAM12 - db8500_esram12_reg: db8500_esram12 { - regulator-compatible = "db8500_esram12"; - regulator-name = "db8500-esram12"; - }; - - // DB8500_REGULATOR_SWITCH_ESRAM12RET - db8500_esram12_ret_reg: db8500_esram12_ret { - regulator-compatible = "db8500_esram12_ret"; - regulator-name = "db8500-esram12-ret"; - }; - - // DB8500_REGULATOR_SWITCH_ESRAM34 - db8500_esram34_reg: db8500_esram34 { - regulator-compatible = "db8500_esram34"; - regulator-name = "db8500-esram34"; - }; - - // DB8500_REGULATOR_SWITCH_ESRAM34RET - db8500_esram34_ret_reg: db8500_esram34_ret { - regulator-compatible = "db8500_esram34_ret"; - regulator-name = "db8500-esram34-ret"; - }; - }; - - ab8500@5 { - compatible = "stericsson,ab8500"; - reg = <5>; /* mailbox 5 is i2c */ - interrupts = <0 40 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - - ab8500-rtc { - compatible = "stericsson,ab8500-rtc"; - interrupts = <17 0x4 - 18 0x4>; - interrupt-names = "60S", "ALARM"; - }; - - ab8500-gpadc { - compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 0x4 - 39 0x4>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - }; - - ab8500-usb { - compatible = "stericsson,ab8500-usb"; - interrupts = < 90 0x4 - 96 0x4 - 14 0x4 - 15 0x4 - 79 0x4 - 74 0x4 - 75 0x4>; - interrupt-names = "ID_WAKEUP_R", - "ID_WAKEUP_F", - "VBUS_DET_F", - "VBUS_DET_R", - "USB_LINK_STATUS", - "USB_ADP_PROBE_PLUG", - "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; - v-ape-supply = <&db8500_vape_reg>; - musb_1v8-supply = <&db8500_vsmps2_reg>; - }; - - ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; - interrupts = <6 0x4 - 7 0x4>; - interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; - }; - - ab8500-sysctrl { - compatible = "stericsson,ab8500-sysctrl"; - }; - - ab8500-pwm { - compatible = "stericsson,ab8500-pwm"; - }; - - ab8500-debugfs { - compatible = "stericsson,ab8500-debug"; - }; - - ab8500-regulators { - compatible = "stericsson,ab8500-regulator"; - - // supplies to the display/camera - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-compatible = "ab8500_ldo_aux1"; - regulator-name = "V-DISPLAY"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - /* BUG: If turned off MMC will be affected. */ - regulator-always-on; - }; - - // supplies to the on-board eMMC - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-compatible = "ab8500_ldo_aux2"; - regulator-name = "V-eMMC1"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <3300000>; - }; - - // supply for VAUX3; SDcard slots - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-compatible = "ab8500_ldo_aux3"; - regulator-name = "V-MMC-SD"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <3300000>; - }; - - // supply for v-intcore12; VINTCORE12 LDO - ab8500_ldo_initcore_reg: ab8500_ldo_initcore { - regulator-compatible = "ab8500_ldo_initcore"; - regulator-name = "V-INTCORE"; - }; - - // supply for tvout; gpadc; TVOUT LDO - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-compatible = "ab8500_ldo_tvout"; - regulator-name = "V-TVOUT"; - }; - - // supply for ab8500-usb; USB LDO - ab8500_ldo_usb_reg: ab8500_ldo_usb { - regulator-compatible = "ab8500_ldo_usb"; - regulator-name = "dummy"; - }; - - // supply for ab8500-vaudio; VAUDIO LDO - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-compatible = "ab8500_ldo_audio"; - regulator-name = "V-AUD"; - }; - - // supply for v-anamic1 VAMic1-LDO - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-compatible = "ab8500_ldo_anamic1"; - regulator-name = "V-AMIC1"; - }; - - // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 - ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { - regulator-compatible = "ab8500_ldo_amamic2"; - regulator-name = "V-AMIC2"; - }; - - // supply for v-dmic; VDMIC LDO - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-compatible = "ab8500_ldo_dmic"; - regulator-name = "V-DMIC"; - }; - - // supply for U8500 CSI/DSI; VANA LDO - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-compatible = "ab8500_ldo_ana"; - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - - i2c@80004000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; - reg = <0x80004000 0x1000>; - interrupts = <0 21 0x4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@80122000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; - reg = <0x80122000 0x1000>; - interrupts = <0 22 0x4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@80128000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; - reg = <0x80128000 0x1000>; - interrupts = <0 55 0x4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@80110000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; - reg = <0x80110000 0x1000>; - interrupts = <0 12 0x4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; - reg = <0x8012a000 0x1000>; - interrupts = <0 51 0x4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - ssp@80002000 { - compatible = "arm,pl022", "arm,primecell"; - reg = <80002000 0x1000>; - interrupts = <0 14 0x4>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - - // Add one of these for each child device - cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 - &gpio6 22 0x4 &gpio7 0 0x4>; - - }; - - uart@80120000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80120000 0x1000>; - interrupts = <0 11 0x4>; - status = "disabled"; - }; - uart@80121000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80121000 0x1000>; - interrupts = <0 19 0x4>; - status = "disabled"; - }; - uart@80007000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x80007000 0x1000>; - interrupts = <0 26 0x4>; - status = "disabled"; - }; - - sdi@80126000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80126000 0x1000>; - interrupts = <0 60 0x4>; - status = "disabled"; - }; - sdi@80118000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80118000 0x1000>; - interrupts = <0 50 0x4>; - status = "disabled"; - }; - sdi@80005000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80005000 0x1000>; - interrupts = <0 41 0x4>; - status = "disabled"; - }; - sdi@80119000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80119000 0x1000>; - interrupts = <0 59 0x4>; - status = "disabled"; - }; - sdi@80114000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; - interrupts = <0 99 0x4>; - status = "disabled"; - }; - sdi@80008000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; - interrupts = <0 100 0x4>; - status = "disabled"; - }; - - external-bus@50000000 { - compatible = "simple-bus"; - reg = <0x50000000 0x4000000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x50000000 0x4000000>; - status = "disabled"; - }; - }; -}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi new file mode 100644 index 000000000000..3180a9c588b9 --- /dev/null +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -0,0 +1,592 @@ +/* + * Copyright 2012 Linaro Ltd + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + soc-u9500 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "stericsson,db8500"; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@a0411000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xa0411000 0x1000>, + <0xa0410100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xa0412000 0x1000>; + interrupts = <0 13 4>; + cache-unified; + cache-level = <2>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 7 0x4>; + }; + + timer@a0410600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xa0410600 0x20>; + interrupts = <1 13 0x304>; + }; + + rtc@80154000 { + compatible = "arm,rtc-pl031", "arm,primecell"; + reg = <0x80154000 0x1000>; + interrupts = <0 18 0x4>; + }; + + gpio0: gpio@8012e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8012e000 0x80>; + interrupts = <0 119 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <0>; + }; + + gpio1: gpio@8012e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8012e080 0x80>; + interrupts = <0 120 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <1>; + }; + + gpio2: gpio@8000e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e000 0x80>; + interrupts = <0 121 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <2>; + }; + + gpio3: gpio@8000e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e080 0x80>; + interrupts = <0 122 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <3>; + }; + + gpio4: gpio@8000e100 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e100 0x80>; + interrupts = <0 123 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <4>; + }; + + gpio5: gpio@8000e180 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8000e180 0x80>; + interrupts = <0 124 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <5>; + }; + + gpio6: gpio@8011e000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8011e000 0x80>; + interrupts = <0 125 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <6>; + }; + + gpio7: gpio@8011e080 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0x8011e080 0x80>; + interrupts = <0 126 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <7>; + }; + + gpio8: gpio@a03fe000 { + compatible = "stericsson,db8500-gpio", + "st,nomadik-gpio"; + reg = <0xa03fe000 0x80>; + interrupts = <0 127 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + st,supports-sleepmode; + gpio-controller; + #gpio-cells = <2>; + gpio-bank = <8>; + }; + + pinctrl { + compatible = "stericsson,nmk_pinctrl"; + }; + + usb@a03e0000 { + compatible = "stericsson,db8500-musb", + "mentor,musb"; + reg = <0xa03e0000 0x10000>; + interrupts = <0 23 0x4>; + }; + + dma-controller@801C0000 { + compatible = "stericsson,db8500-dma40", + "stericsson,dma40"; + reg = <0x801C0000 0x1000 0x40010000 0x800>; + interrupts = <0 25 0x4>; + }; + + prcmu@80157000 { + compatible = "stericsson,db8500-prcmu"; + reg = <0x80157000 0x1000>; + interrupts = <0 47 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + prcmu-timer-4@80157450 { + compatible = "stericsson,db8500-prcmu-timer-4"; + reg = <0x80157450 0xC>; + }; + + db8500-prcmu-regulators { + compatible = "stericsson,db8500-prcmu-regulator"; + + // DB8500_REGULATOR_VAPE + db8500_vape_reg: db8500_vape { + regulator-compatible = "db8500_vape"; + regulator-name = "db8500-vape"; + regulator-always-on; + }; + + // DB8500_REGULATOR_VARM + db8500_varm_reg: db8500_varm { + regulator-compatible = "db8500_varm"; + regulator-name = "db8500-varm"; + }; + + // DB8500_REGULATOR_VMODEM + db8500_vmodem_reg: db8500_vmodem { + regulator-compatible = "db8500_vmodem"; + regulator-name = "db8500-vmodem"; + }; + + // DB8500_REGULATOR_VPLL + db8500_vpll_reg: db8500_vpll { + regulator-compatible = "db8500_vpll"; + regulator-name = "db8500-vpll"; + }; + + // DB8500_REGULATOR_VSMPS1 + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-compatible = "db8500_vsmps1"; + regulator-name = "db8500-vsmps1"; + }; + + // DB8500_REGULATOR_VSMPS2 + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-compatible = "db8500_vsmps2"; + regulator-name = "db8500-vsmps2"; + }; + + // DB8500_REGULATOR_VSMPS3 + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-compatible = "db8500_vsmps3"; + regulator-name = "db8500-vsmps3"; + }; + + // DB8500_REGULATOR_VRF1 + db8500_vrf1_reg: db8500_vrf1 { + regulator-compatible = "db8500_vrf1"; + regulator-name = "db8500-vrf1"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSP + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-compatible = "db8500_sva_mmdsp"; + regulator-name = "db8500-sva-mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SVAMMDSPRET + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-compatible = "db8500_sva_mmdsp_ret"; + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SVAPIPE + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-compatible = "db8500_sva_pipe"; + regulator-name = "db8500_sva_pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSP + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-compatible = "db8500_sia_mmdsp"; + regulator-name = "db8500_sia_mmdsp"; + }; + + // DB8500_REGULATOR_SWITCH_SIAMMDSPRET + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + // DB8500_REGULATOR_SWITCH_SIAPIPE + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-compatible = "db8500_sia_pipe"; + regulator-name = "db8500-sia-pipe"; + }; + + // DB8500_REGULATOR_SWITCH_SGA + db8500_sga_reg: db8500_sga { + regulator-compatible = "db8500_sga"; + regulator-name = "db8500-sga"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_B2R2_MCDE + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-compatible = "db8500_b2r2_mcde"; + regulator-name = "db8500-b2r2-mcde"; + vin-supply = <&db8500_vape_reg>; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12 + db8500_esram12_reg: db8500_esram12 { + regulator-compatible = "db8500_esram12"; + regulator-name = "db8500-esram12"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM12RET + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-compatible = "db8500_esram12_ret"; + regulator-name = "db8500-esram12-ret"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34 + db8500_esram34_reg: db8500_esram34 { + regulator-compatible = "db8500_esram34"; + regulator-name = "db8500-esram34"; + }; + + // DB8500_REGULATOR_SWITCH_ESRAM34RET + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-compatible = "db8500_esram34_ret"; + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + compatible = "stericsson,ab8500"; + reg = <5>; /* mailbox 5 is i2c */ + interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; + + ab8500-regulators { + compatible = "stericsson,ab8500-regulator"; + + // supplies to the display/camera + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-compatible = "ab8500_ldo_aux1"; + regulator-name = "V-DISPLAY"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + /* BUG: If turned off MMC will be affected. */ + regulator-always-on; + }; + + // supplies to the on-board eMMC + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-compatible = "ab8500_ldo_aux2"; + regulator-name = "V-eMMC1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for VAUX3; SDcard slots + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-compatible = "ab8500_ldo_aux3"; + regulator-name = "V-MMC-SD"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + // supply for v-intcore12; VINTCORE12 LDO + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-compatible = "ab8500_ldo_initcore"; + regulator-name = "V-INTCORE"; + }; + + // supply for tvout; gpadc; TVOUT LDO + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-compatible = "ab8500_ldo_tvout"; + regulator-name = "V-TVOUT"; + }; + + // supply for ab8500-usb; USB LDO + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-compatible = "ab8500_ldo_usb"; + regulator-name = "dummy"; + }; + + // supply for ab8500-vaudio; VAUDIO LDO + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-compatible = "ab8500_ldo_audio"; + regulator-name = "V-AUD"; + }; + + // supply for v-anamic1 VAMic1-LDO + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-compatible = "ab8500_ldo_anamic1"; + regulator-name = "V-AMIC1"; + }; + + // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-compatible = "ab8500_ldo_amamic2"; + regulator-name = "V-AMIC2"; + }; + + // supply for v-dmic; VDMIC LDO + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-compatible = "ab8500_ldo_dmic"; + regulator-name = "V-DMIC"; + }; + + // supply for U8500 CSI/DSI; VANA LDO + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-compatible = "ab8500_ldo_ana"; + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + + i2c@80004000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80004000 0x1000>; + interrupts = <0 21 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80122000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80122000 0x1000>; + interrupts = <0 22 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80128000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80128000 0x1000>; + interrupts = <0 55 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@80110000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80110000 0x1000>; + interrupts = <0 12 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@8012a000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x8012a000 0x1000>; + interrupts = <0 51 0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ssp@80002000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <80002000 0x1000>; + interrupts = <0 14 0x4>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + // Add one of these for each child device + cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4 + &gpio6 22 0x4 &gpio7 0 0x4>; + + }; + + uart@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 0x4>; + status = "disabled"; + }; + uart@80121000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80121000 0x1000>; + interrupts = <0 19 0x4>; + status = "disabled"; + }; + uart@80007000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80007000 0x1000>; + interrupts = <0 26 0x4>; + status = "disabled"; + }; + + sdi@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <0 60 0x4>; + status = "disabled"; + }; + sdi@80118000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80118000 0x1000>; + interrupts = <0 50 0x4>; + status = "disabled"; + }; + sdi@80005000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80005000 0x1000>; + interrupts = <0 41 0x4>; + status = "disabled"; + }; + sdi@80119000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80119000 0x1000>; + interrupts = <0 59 0x4>; + status = "disabled"; + }; + sdi@80114000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 99 0x4>; + status = "disabled"; + }; + sdi@80008000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80114000 0x1000>; + interrupts = <0 100 0x4>; + status = "disabled"; + }; + + external-bus@50000000 { + compatible = "simple-bus"; + reg = <0x50000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x4000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 7e334d4cae21..df6fc577f0d6 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "db8500.dtsi" +/include/ "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; -- cgit v1.2.3-58-ga151 From 38cd8c5d7561c01619959f09099c7430420c4008 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 27 Jun 2012 08:42:08 +0100 Subject: ARM: ux500: Clean-up temporary Device Tree enablement helpers Here we remove some of the extra overhead we introduced to make DT:ing the Snowball platform easier. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/cpu-db8500.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index db3c52d56ca4..38b7f9c4788b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -138,10 +138,6 @@ static struct platform_device *platform_devs[] __initdata = { &db8500_prcmu_device, }; -static struct platform_device *of_platform_devs[] __initdata = { - &u8500_dma40_device, -}; - static resource_size_t __initdata db8500_gpio_base[] = { U8500_GPIOBANK0_BASE, U8500_GPIOBANK1_BASE, @@ -235,7 +231,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) struct device * __init u8500_of_init_devices(void) { struct device *parent; - int i; parent = db8500_soc_device_init(); @@ -244,8 +239,7 @@ struct device * __init u8500_of_init_devices(void) platform_device_register_data(parent, "cpufreq-u8500", -1, NULL, 0); - for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++) - of_platform_devs[i]->dev.parent = parent; + u8500_dma40_device.dev.parent = parent; /* * Devices to be DT:ed: @@ -253,7 +247,7 @@ struct device * __init u8500_of_init_devices(void) * db8500_pmu_device = done * db8500_prcmu_device = done */ - platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs)); + platform_device_register(&u8500_dma40_device); return parent; } -- cgit v1.2.3-58-ga151 From 96bbf7910c9a198fda9c71081e4900a7e365dbbc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 6 Jul 2012 09:06:20 +0100 Subject: ARM: ux500: Pass PMU platform data due for Perf though AUXDATA When booting with Device Tree we need a way to call-back to the DB8500 PMU IRQ handler. This is necessary because the two CPU IRQ lines are muxed together on the DB8500 chip. The DB8500 PMU IRQ handler contains logic to pass over to the other core in the case of IRQ_NONE. This patch allows the DB8500 PMU IRQ handler to be passed to Perf through platform data. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 2 ++ arch/arm/mach-ux500/board-mop500.h | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a534d8880de1..5d9600b1020b 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -732,6 +732,8 @@ static struct platform_device *snowball_of_platform_devs[] __initdata = { }; struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index b5bfc1a78b1a..d04a8e6ce7ee 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -81,6 +81,7 @@ struct device; struct i2c_board_info; extern struct mmci_platform_data mop500_sdi0_data; extern struct mmci_platform_data mop500_sdi4_data; +extern struct arm_pmu_platdata db8500_pmu_platdata; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); -- cgit v1.2.3-58-ga151 From e8b9acd26bbb3f05b9d7fbb8b439441eb328e51d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 12:30:57 +0100 Subject: Documentation: Add the AB8500 CODEC device to the MFD AB8500 doc Here we document the AB8500 Audio CODEC in the existing MFD AB8500 document. CC: alsa-devel@alsa-project.org Acked-by: Linus Walleij Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/ab8500.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 69e757a657a0..ce83c8d3c00e 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -23,6 +23,7 @@ Device IRQ Names Supply Names Description ab8500-bm : : : Battery Manager ab8500-btemp : : : Battery Temperature ab8500-charger : : : Battery Charger +ab8500-codec : : : Audio Codec ab8500-fg : : : Fuel Gauge ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : @@ -52,6 +53,14 @@ Optional child device properties: supplied in the interrupts property - -supply : contains a phandle to the regulator supply node in Device Tree +Non-standard child device properties: + - Audio CODEC: + - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential) + - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) + ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ @@ -110,6 +119,12 @@ ab8500@5 { compatible = "stericsson,ab8500-pwm"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; -- cgit v1.2.3-58-ga151 From 62861095dc3f40594958f45257f2551c1d7e2655 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 Aug 2012 13:44:59 +0100 Subject: of/irq: Create stub for of_irq_find_parent when !CONFIG_OF of_irq_find_parent is a handy function to use outside the confines of the Open Firmware subsystem. One such use-case is when the IRQ Domain wishes to find an IRQ domain for a given device node. Currently it can not take any notice of the 'interrupt-parent' property. Instead it just uses the first IRQ controller as it climbs the Device Tree. If we were to use this as a precursor the resultant controller is more likely to be correct. Acked-by: Rob Herring Acked-by: Linus Walleij Signed-off-by: Lee Jones --- include/linux/of_irq.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index 1717cd935e1c..b8e241125201 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -83,6 +83,11 @@ static inline unsigned int irq_of_parse_and_map(struct device_node *dev, { return 0; } + +static inline void *of_irq_find_parent(struct device_node *child) +{ + return NULL; +} #endif /* !CONFIG_OF */ #endif /* __OF_IRQ_H */ -- cgit v1.2.3-58-ga151 From c09090bb2fa557a697636c1a5484f5b695e2f89d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Aug 2012 15:42:25 +0100 Subject: ARM: ux500: Identify the PRCMU as an interrupt controller We're just about to provide the DB8500-PRCMU with its own IRQ domain, so that its subordinate drivers can use it as an interrupt controller. It's obligatory for all IRQ controllers to reference themselves as such from its own node in Device Tree. This patch does just that. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 3180a9c588b9..04cd525eb870 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -194,6 +194,8 @@ interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; ranges; prcmu-timer-4@80157450 { -- cgit v1.2.3-58-ga151 From 8d4c6d45bcdde7e9294ead322c5348873430003d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 3 Aug 2012 20:37:35 +0100 Subject: ARM: ux500: Force AB8500 to use the GIC as its interrupt controller It's understood that the AB8500 should be subordinate to the DB8500; however, the AB8500 uses the GIC as it's interrupt controller. If we do not specify which IRQ controller to use the default is to use the next encountered IRQ controller as we climb the tree. This would be the DB8500. This patch ensures the AB8500 makes use of the correct interrupt controller. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 04cd525eb870..daedefe23eab 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -332,6 +332,7 @@ ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ + interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3-58-ga151 From e9edfe1ec02574b7ece2c195834a7a5387558c70 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 30 Aug 2012 14:08:19 +0100 Subject: Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping" This reverts commit ca3b3faf9bee4dc5df4f10eae2d1e48f7de0a8ad. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Acked-by: Dmitry Torokhov Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/input/misc/ab8500-ponkey.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index f06231b7cab1..84ec691c05aa 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -74,8 +74,8 @@ static int __devinit ab8500_ponkey_probe(struct platform_device *pdev) ponkey->idev = input; ponkey->ab8500 = ab8500; - ponkey->irq_dbf = ab8500_irq_get_virq(ab8500, irq_dbf); - ponkey->irq_dbr = ab8500_irq_get_virq(ab8500, irq_dbr); + ponkey->irq_dbf = irq_dbf; + ponkey->irq_dbr = irq_dbr; input->name = "AB8500 POn(PowerOn) Key"; input->dev.parent = &pdev->dev; -- cgit v1.2.3-58-ga151 From 436d99e6c9d44fa8d7632a70cb32291cffc493dd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 19 Jul 2012 16:52:10 +0100 Subject: ARM: ux500: Remove unused snowball_of_platform_devs struct This was left over during a recent clean-up which removed Device Tree helper structs. There is no longer a requirement for it, so we can just remove it. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5d9600b1020b..5d0f1357580e 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -726,11 +726,6 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), -- cgit v1.2.3-58-ga151 From 746307061dd8ed1c31bff94183e018be7fa03b68 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 13:00:12 +0100 Subject: ARM: ux500: Match Power-On-Key MFD and DTS compatible strings The compatible string found in the Power-On-Key's MFD cell matches the device name provided in the driver. Keeping this naming convention seems like a good idea, so we're changing the one found in the DTS file to match. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index daedefe23eab..dc290d0b72f8 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -374,7 +374,7 @@ }; ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; + compatible = "stericsson,ab8500-poweron-key"; interrupts = <6 0x4 7 0x4>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; -- cgit v1.2.3-58-ga151 From c55c7ba7f8183780dcc60aff1ff90f047f0a3ea4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 9 Aug 2012 13:28:19 +0100 Subject: drivers/rtc/rtc-ab8500.c: Revoke Device Tree enablement All AB8500 devices are now registered via MFD core, so Device Tree capability is no longer required for probing. Here we pull the DT match table to ensure we're no longer probed during Device Tree start-up. CC: Alessandro Zummo CC: rtc-linux@googlegroups.com Acked-by: Linus Walleij Signed-off-by: Lee Jones --- drivers/rtc/rtc-ab8500.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/rtc/rtc-ab8500.c b/drivers/rtc/rtc-ab8500.c index bf3c2f669c3c..2e5970fe9eeb 100644 --- a/drivers/rtc/rtc-ab8500.c +++ b/drivers/rtc/rtc-ab8500.c @@ -462,16 +462,10 @@ static int __devexit ab8500_rtc_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id ab8500_rtc_match[] = { - { .compatible = "stericsson,ab8500-rtc", }, - {} -}; - static struct platform_driver ab8500_rtc_driver = { .driver = { .name = "ab8500-rtc", .owner = THIS_MODULE, - .of_match_table = ab8500_rtc_match, }, .probe = ab8500_rtc_probe, .remove = __devexit_p(ab8500_rtc_remove), -- cgit v1.2.3-58-ga151 From d524fa7ff674e834607fe9d6d6284a5e129762c7 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 18 Jun 2012 09:55:44 +0100 Subject: ARM: ux500: Add i2c configurations to the Device Tree for DB8500 based devices Since initial support was provided for the Nomadik I2C driver, it has been converted to an AMBA device. AMBA devices are probed in a slightly different way to other devices, so we have to identify them using an "arm,primecell" compatible string. As well as doing just that, this patch specifies which regulators the controller should use and requests a clock-speed. The latter is provided as more of an example, as it's the same as the recently changed default configuration. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index dc290d0b72f8..cbef6abbf907 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -474,43 +474,58 @@ }; i2c@80004000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80122000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80128000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80110000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; ssp@80002000 { -- cgit v1.2.3-58-ga151 From 6af7fd88fff48553b3afc01a75fa588cae5b8420 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 30 Aug 2012 15:53:39 +0100 Subject: ARM: ux500: Add skeleton Device Tree for the HREF reference board First commit applying the new Device Tree for ST-Ericsson's u8500 based hardware reference board. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 arch/arm/boot/dts/hrefv60plus.dts diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts new file mode 100644 index 000000000000..96bf8a3af70c --- /dev/null +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson HREF platform with Device Tree"; + compatible = "st-ericsson,hrefv60+"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + + }; +}; -- cgit v1.2.3-58-ga151 From 9905f7c1dbfb53fe9537b0da722d1be1e956f66b Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 30 Aug 2012 15:57:31 +0100 Subject: ARM: ux500: Add UART support to the HREF Device Tree Here we add three nodes enabling UART support on the HREF hardware reference board. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 96bf8a3af70c..32cd7a03817d 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -21,6 +21,16 @@ }; soc-u9500 { + uart@80120000 { + status = "okay"; + }; + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; }; }; -- cgit v1.2.3-58-ga151 From 9cf24b157c3c4e7bc4060668245dc4affba3dcfc Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 30 Aug 2012 16:11:08 +0100 Subject: ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI There are four SDIs on the HREF, as opposed to the original two enabled on Snowball. To get them working we have to pass their DMA information in the same was as we need with the other two. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-sdi.c | 4 ++-- arch/arm/mach-ux500/board-mop500.c | 2 ++ arch/arm/mach-ux500/board-mop500.h | 2 ++ 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 18ff781cfbe4..9c8e4a9e83ee 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi1_data = { +struct mmci_platform_data mop500_sdi1_data = { .ocr_mask = MMC_VDD_29_30, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA, @@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { }; #endif -static struct mmci_platform_data mop500_sdi2_data = { +struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 5d0f1357580e..8890b19b90e7 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -736,6 +736,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA bindings. */ OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), /* Requires clock name bindings. */ OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index d04a8e6ce7ee..eb421f9f01aa 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -80,6 +80,8 @@ struct device; struct i2c_board_info; extern struct mmci_platform_data mop500_sdi0_data; +extern struct mmci_platform_data mop500_sdi1_data; +extern struct mmci_platform_data mop500_sdi2_data; extern struct mmci_platform_data mop500_sdi4_data; extern struct arm_pmu_platdata db8500_pmu_platdata; -- cgit v1.2.3-58-ga151 From 65b67d33fbce920d7c502a146504fcbb2db99e40 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 14 Sep 2012 15:43:52 +0100 Subject: ARM: ux500: Clean-up MSP platform code This patch contains a couple of general MSP clean-ups pertaining to layout changes and changing functions to be void instead of int instead of regardlessly returning '0'. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 14 ++++++-------- arch/arm/mach-ux500/board-mop500-msp.h | 14 -------------- arch/arm/mach-ux500/board-mop500.c | 1 - arch/arm/mach-ux500/board-mop500.h | 1 + 4 files changed, 7 insertions(+), 23 deletions(-) delete mode 100644 arch/arm/mach-ux500/board-mop500-msp.h diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index ace6c051bc1a..dcf5ea9884f8 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -143,11 +143,11 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, /* Platform device for ASoC MOP500 machine */ static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, + .name = "snd-soc-mop500", + .id = 0, + .dev = { + .platform_data = NULL, + }, }; /* Platform device for Ux500-PCM */ @@ -171,7 +171,7 @@ static struct msp_i2s_platform_data msp3_platform_data = { .msp_i2s_dma_tx = NULL, }; -int mop500_msp_init(struct device *parent) +void mop500_msp_init(struct device *parent) { pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); platform_device_register(&snd_soc_mop500); @@ -185,6 +185,4 @@ int mop500_msp_init(struct device *parent) &msp2_platform_data); db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, &msp3_platform_data); - - return 0; } diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h deleted file mode 100644 index 6fcfb5e2cc94..000000000000 --- a/arch/arm/mach-ux500/board-mop500-msp.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2012 - * - * Author: Ola Lilja , - * for ST-Ericsson. - * - * License terms: - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -void mop500_msp_init(struct device *parent); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8890b19b90e7..a7994776ef30 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -54,7 +54,6 @@ #include "devices-db8500.h" #include "board-mop500.h" #include "board-mop500-regulators.h" -#include "board-mop500-msp.h" static struct gpio_led snowball_led_array[] = { { diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index eb421f9f01aa..bdae9b03a33b 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -94,6 +94,7 @@ void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); +void mop500_msp_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, -- cgit v1.2.3-58-ga151 From 9c06af30207276a0a4bcaf8aa57521095f440383 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 25 Jul 2012 12:50:13 +0100 Subject: ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree Ensure correct probing and pass though important configuration options to the AB8500 CODEC driver when DT is enabled Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index cbef6abbf907..f055902a9b7d 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -392,6 +392,12 @@ compatible = "stericsson,ab8500-debug"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; -- cgit v1.2.3-58-ga151 From ae6d35b9486b61c50294f88c1eb5dc1c7b74e65b Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 26 Jul 2012 17:42:01 +0100 Subject: ARM: ux500: Fork MSP platform registration for step-by-step DT enablement We've done this before and it worked well last time. Here we're duplicating a complex registration function to ease the process of enabling it for Device Tree. As there are quite a few steps taken during the registration process, it makes sense to break them up into more manageable chunks. This patch will aid us. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 20 ++++++++++++++++++++ arch/arm/mach-ux500/board-mop500.c | 2 +- arch/arm/mach-ux500/board-mop500.h | 2 ++ 3 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index dcf5ea9884f8..bfd48515073d 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -171,6 +171,26 @@ static struct msp_i2s_platform_data msp3_platform_data = { .msp_i2s_dma_tx = NULL, }; +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_msp_init(struct device *parent) +{ + pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); + platform_device_register(&snd_soc_mop500); + + pr_info("Initialize MSP I2S-devices.\n"); + db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); + + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); +} + void mop500_msp_init(struct device *parent) { pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index a7994776ef30..e7593b0a4f42 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -804,7 +804,7 @@ static void __init u8500_init_machine(void) mop500_uib_init(); } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_msp_init(parent); + mop500_of_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index bdae9b03a33b..c6daea208870 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -95,6 +95,8 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_msp_init(struct device *parent); +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_msp_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, -- cgit v1.2.3-58-ga151 From 724ebbf4cf248cd747b29fe91ecc96de302a469a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 25 Jul 2012 13:58:36 +0100 Subject: ARM: ux500: Pass MSP DMA platform data though AUXDATA It isn't currently possible to pass all platform specific configuration though Device Tree. Thinks like device names used in the clock infrastructure, call-backs and DMA information have to be passed in via AUXDATA structures and the MSP is no exception. Here we're passing DMA settings. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 8 ++++---- arch/arm/mach-ux500/board-mop500.c | 9 +++++++++ arch/arm/mach-ux500/board-mop500.h | 5 +++++ 3 files changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index bfd48515073d..1c60135abee8 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -48,7 +48,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = { /* data_width is set during configuration */ }; -static struct msp_i2s_platform_data msp0_platform_data = { +struct msp_i2s_platform_data msp0_platform_data = { .id = MSP_I2S_0, .msp_i2s_dma_rx = &msp0_dma_rx, .msp_i2s_dma_tx = &msp0_dma_tx, @@ -80,7 +80,7 @@ static struct stedma40_chan_cfg msp1_dma_tx = { /* data_width is set during configuration */ }; -static struct msp_i2s_platform_data msp1_platform_data = { +struct msp_i2s_platform_data msp1_platform_data = { .id = MSP_I2S_1, .msp_i2s_dma_rx = NULL, .msp_i2s_dma_tx = &msp1_dma_tx, @@ -159,13 +159,13 @@ static struct platform_device ux500_pcm = { }, }; -static struct msp_i2s_platform_data msp2_platform_data = { +struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, .msp_i2s_dma_tx = &msp2_dma_tx, }; -static struct msp_i2s_platform_data msp3_platform_data = { +struct msp_i2s_platform_data msp3_platform_data = { .id = MSP_I2S_3, .msp_i2s_dma_rx = &msp1_dma_rx, .msp_i2s_dma_tx = NULL, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index e7593b0a4f42..2cb13bc33c83 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -755,6 +755,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), /* Requires device name bindings. */ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), + /* Requires clock name and DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), {}, }; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index c6daea208870..67943243eb12 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -9,6 +9,7 @@ /* For NOMADIK_NR_GPIO */ #include +#include #include /* Snowball specific GPIO assignments, this board has no GPIO expander */ @@ -83,6 +84,10 @@ extern struct mmci_platform_data mop500_sdi0_data; extern struct mmci_platform_data mop500_sdi1_data; extern struct mmci_platform_data mop500_sdi2_data; extern struct mmci_platform_data mop500_sdi4_data; +extern struct msp_i2s_platform_data msp0_platform_data; +extern struct msp_i2s_platform_data msp1_platform_data; +extern struct msp_i2s_platform_data msp2_platform_data; +extern struct msp_i2s_platform_data msp3_platform_data; extern struct arm_pmu_platdata db8500_pmu_platdata; extern void mop500_sdi_init(struct device *parent); -- cgit v1.2.3-58-ga151 From 2aed23d3e84aab9f0f066f31db5f6927c067d076 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 26 Jul 2012 17:43:13 +0100 Subject: ARM: ux500: Stop registering the MOP500 Audio driver from platform code In this patch we prevent MOP500 driver registration from platform code and rely solely on Device Tree to do the probing for us. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 1c60135abee8..ddc74c574eaf 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -174,9 +174,6 @@ struct msp_i2s_platform_data msp3_platform_data = { /* Due for removal once the MSP driver has been fully DT:ed. */ void mop500_of_msp_init(struct device *parent) { - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_mop500); - pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, &msp0_platform_data); -- cgit v1.2.3-58-ga151 From 4fa469419f8f9216c0313489f3819e1099a4933f Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 24 Aug 2012 13:12:07 +0100 Subject: ARM: ux500: Remove platform registration of MSP devices This patch removes platform device registration of all 4 MSP devices. It also takes care of all redundant infrastructure now that each of the ux500 audio components have been Device Tree enabled. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500-msp.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index ddc74c574eaf..d04f54d7527f 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -174,16 +174,6 @@ struct msp_i2s_platform_data msp3_platform_data = { /* Due for removal once the MSP driver has been fully DT:ed. */ void mop500_of_msp_init(struct device *parent) { - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); platform_device_register(&ux500_pcm); } -- cgit v1.2.3-58-ga151 From 39b740bf142ab34566c6d1f4498176bb7600ca18 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 14 Sep 2012 15:46:29 +0100 Subject: ARM: ux500: Rename MSP board file to something more meaningful The 'msp' board file does more than just register MSP devices. It also registers some other components necessary to get audio working on ux500 based platforms; such as the PCM and Machine Drivers. For that reason we're changing the filename to be more encompassing - 'audio'. Acked-by: Ola Lilja Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/Makefile | 2 +- arch/arm/mach-ux500/board-mop500-audio.c | 195 +++++++++++++++++++++++++++++++ arch/arm/mach-ux500/board-mop500-msp.c | 195 ------------------------------- arch/arm/mach-ux500/board-mop500.c | 12 +- arch/arm/mach-ux500/board-mop500.h | 4 +- 5 files changed, 204 insertions(+), 204 deletions(-) create mode 100644 arch/arm/mach-ux500/board-mop500-audio.c delete mode 100644 arch/arm/mach-ux500/board-mop500-msp.c diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 026086ff9e6c..1dc2cfa8bcb5 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ board-mop500-uib.o board-mop500-stuib.o \ board-mop500-u8500uib.o \ board-mop500-pins.o \ - board-mop500-msp.o + board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c new file mode 100644 index 000000000000..070629a95625 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -0,0 +1,195 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#include "ste-dma40-db8500.h" +#include "board-mop500.h" +#include "devices-db8500.h" +#include "pins-db8500.h" + +static struct stedma40_chan_cfg msp0_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp0_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +struct msp_i2s_platform_data msp0_platform_data = { + .id = MSP_I2S_0, + .msp_i2s_dma_rx = &msp0_dma_rx, + .msp_i2s_dma_tx = &msp0_dma_tx, +}; + +static struct stedma40_chan_cfg msp1_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp1_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + /* data_width is set during configuration */ +}; + +struct msp_i2s_platform_data msp1_platform_data = { + .id = MSP_I2S_1, + .msp_i2s_dma_rx = NULL, + .msp_i2s_dma_tx = &msp1_dma_tx, +}; + +static struct stedma40_chan_cfg msp2_dma_rx = { + .high_priority = true, + .dir = STEDMA40_PERIPH_TO_MEM, + + .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, + .dst_dev_type = STEDMA40_DEV_DST_MEMORY, + + /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + + /* data_width is set during configuration */ +}; + +static struct stedma40_chan_cfg msp2_dma_tx = { + .high_priority = true, + .dir = STEDMA40_MEM_TO_PERIPH, + + .src_dev_type = STEDMA40_DEV_DST_MEMORY, + .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, + + .src_info.psize = STEDMA40_PSIZE_LOG_4, + .dst_info.psize = STEDMA40_PSIZE_LOG_4, + + .use_fixed_channel = true, + .phy_channel = 1, + + /* data_width is set during configuration */ +}; + +static struct platform_device *db8500_add_msp_i2s(struct device *parent, + int id, + resource_size_t base, int irq, + struct msp_i2s_platform_data *pdata) +{ + struct platform_device *pdev; + struct resource res[] = { + DEFINE_RES_MEM(base, SZ_4K), + DEFINE_RES_IRQ(irq), + }; + + pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", + id, irq); + pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); + if (!pdev) { + pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", + id); + return NULL; + } + + return pdev; +} + +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +/* Platform device for Ux500-PCM */ +static struct platform_device ux500_pcm = { + .name = "ux500-pcm", + .id = 0, + .dev = { + .platform_data = NULL, + }, +}; + +struct msp_i2s_platform_data msp2_platform_data = { + .id = MSP_I2S_2, + .msp_i2s_dma_rx = &msp2_dma_rx, + .msp_i2s_dma_tx = &msp2_dma_tx, +}; + +struct msp_i2s_platform_data msp3_platform_data = { + .id = MSP_I2S_3, + .msp_i2s_dma_rx = &msp1_dma_rx, + .msp_i2s_dma_tx = NULL, +}; + +void mop500_audio_init(struct device *parent) +{ + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); + + pr_info("Initialize MSP I2S-devices.\n"); + db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, + &msp0_platform_data); + db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, + &msp1_platform_data); + db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, + &msp2_platform_data); + db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, + &msp3_platform_data); +} + +/* Due for removal once the MSP driver has been fully DT:ed. */ +void mop500_of_audio_init(struct device *parent) +{ + pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); + platform_device_register(&ux500_pcm); +} diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c deleted file mode 100644 index d04f54d7527f..000000000000 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL), version 2 - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "ste-dma40-db8500.h" -#include "board-mop500.h" -#include "devices-db8500.h" -#include "pins-db8500.h" - -static struct stedma40_chan_cfg msp0_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp0_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -struct msp_i2s_platform_data msp0_platform_data = { - .id = MSP_I2S_0, - .msp_i2s_dma_rx = &msp0_dma_rx, - .msp_i2s_dma_tx = &msp0_dma_tx, -}; - -static struct stedma40_chan_cfg msp1_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV30_MSP3_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp1_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - /* data_width is set during configuration */ -}; - -struct msp_i2s_platform_data msp1_platform_data = { - .id = MSP_I2S_1, - .msp_i2s_dma_rx = NULL, - .msp_i2s_dma_tx = &msp1_dma_tx, -}; - -static struct stedma40_chan_cfg msp2_dma_rx = { - .high_priority = true, - .dir = STEDMA40_PERIPH_TO_MEM, - - .src_dev_type = DB8500_DMA_DEV14_MSP2_RX, - .dst_dev_type = STEDMA40_DEV_DST_MEMORY, - - /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */ - .src_info.psize = STEDMA40_PSIZE_LOG_1, - .dst_info.psize = STEDMA40_PSIZE_LOG_1, - - /* data_width is set during configuration */ -}; - -static struct stedma40_chan_cfg msp2_dma_tx = { - .high_priority = true, - .dir = STEDMA40_MEM_TO_PERIPH, - - .src_dev_type = STEDMA40_DEV_DST_MEMORY, - .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX, - - .src_info.psize = STEDMA40_PSIZE_LOG_4, - .dst_info.psize = STEDMA40_PSIZE_LOG_4, - - .use_fixed_channel = true, - .phy_channel = 1, - - /* data_width is set during configuration */ -}; - -static struct platform_device *db8500_add_msp_i2s(struct device *parent, - int id, - resource_size_t base, int irq, - struct msp_i2s_platform_data *pdata) -{ - struct platform_device *pdev; - struct resource res[] = { - DEFINE_RES_MEM(base, SZ_4K), - DEFINE_RES_IRQ(irq), - }; - - pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n", - id, irq); - pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id, - res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); - if (!pdev) { - pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n", - id); - return NULL; - } - - return pdev; -} - -/* Platform device for ASoC MOP500 machine */ -static struct platform_device snd_soc_mop500 = { - .name = "snd-soc-mop500", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -/* Platform device for Ux500-PCM */ -static struct platform_device ux500_pcm = { - .name = "ux500-pcm", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - -struct msp_i2s_platform_data msp2_platform_data = { - .id = MSP_I2S_2, - .msp_i2s_dma_rx = &msp2_dma_rx, - .msp_i2s_dma_tx = &msp2_dma_tx, -}; - -struct msp_i2s_platform_data msp3_platform_data = { - .id = MSP_I2S_3, - .msp_i2s_dma_rx = &msp1_dma_rx, - .msp_i2s_dma_tx = NULL, -}; - -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_msp_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); -} - -void mop500_msp_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); - platform_device_register(&snd_soc_mop500); - - pr_info("Initialize MSP I2S-devices.\n"); - db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, - &msp0_platform_data); - db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, - &msp1_platform_data); - db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, - &msp2_platform_data); - db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, - &msp3_platform_data); -} diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 2cb13bc33c83..ab3fe2cd0b7d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -607,7 +607,7 @@ static void __init mop500_init_machine(void) mop500_i2c_init(parent); mop500_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); u8500_cryp1_hash1_init(parent); @@ -641,7 +641,7 @@ static void __init snowball_init_machine(void) mop500_i2c_init(parent); snowball_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); /* This board has full regulator constraints */ @@ -673,7 +673,7 @@ static void __init hrefv60_init_machine(void) mop500_i2c_init(parent); hrefv60_sdi_init(parent); mop500_spi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); mop500_uart_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); @@ -804,7 +804,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -813,7 +813,7 @@ static void __init u8500_init_machine(void) mop500_uib_init(); } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_of_msp_init(parent); + mop500_of_audio_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -825,7 +825,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); - mop500_msp_init(parent); + mop500_audio_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 67943243eb12..aca39a68712a 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -99,9 +99,9 @@ void __init mop500_stuib_init(void); void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); -void mop500_msp_init(struct device *parent); +void mop500_audio_init(struct device *parent); /* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_msp_init(struct device *parent); +void mop500_of_audio_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, -- cgit v1.2.3-58-ga151 From fe1645290872300f87bca17e90b3068fcb264089 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 12:37:16 +0100 Subject: ARM: ux500: Add nodes for the MSP into Device Tree This patch inserts all known MSP devices into the DBx5x0 Device Tree disabled and enables the two important ones for the Snowball low-cost development board. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 33 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/snowball.dts | 8 ++++++++ 2 files changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index f055902a9b7d..3708a6ba7ed3 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -604,6 +604,39 @@ status = "disabled"; }; + msp0: msp@80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <0 31 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + // HDMI sound + msp2: msp@80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <0 98 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + external-bus@50000000 { compatible = "simple-bus"; reg = <0x50000000 0x4000000>; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index df6fc577f0d6..fce4a0067a74 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -83,6 +83,14 @@ }; soc-u9500 { + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + external-bus@50000000 { status = "okay"; -- cgit v1.2.3-58-ga151 From e6488065cdee7ef7051e754960ba22943464b37d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 31 Jul 2012 13:31:50 +0100 Subject: ARM: ux500: Add all encompassing sound node to the Snowball Device Tree This is where we link together all of the SoC sound components for a given platform. This all encompassing sound node is only found in the very lowest hierarchical DTS file, since the component mix may well change from board variant to board variant. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/snowball.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index fce4a0067a74..29699971b5b3 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -83,6 +83,14 @@ }; soc-u9500 { + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + msp1: msp@80124000 { status = "okay"; }; -- cgit v1.2.3-58-ga151 From 341976e79874c1059516dd2f99f2b10152f595da Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 14 Sep 2012 15:25:26 +0100 Subject: ARM: ux500: Stop registering Audio devices for HREF when DT is enabled Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index ab3fe2cd0b7d..671229e0b23c 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -825,7 +825,6 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); - mop500_audio_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; -- cgit v1.2.3-58-ga151 From 65392b8253cbf10da5fcf45d855f27715fc30873 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Sep 2012 17:08:50 +0200 Subject: ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled Here we remove all calls to register I2C sub-devices from platform code when Device Tree is enabled. Instead the I2C driver will parse the Device Tree for them. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 671229e0b23c..3faedf07ed6a 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -824,15 +824,6 @@ static void __init u8500_init_machine(void) platform_add_devices(mop500_platform_devs, ARRAY_SIZE(mop500_platform_devs)); - hrefv60_sdi_init(parent); - - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; - - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - mop500_uib_init(); } -- cgit v1.2.3-58-ga151 From 71e8118fe722827365376a4d80faa40d939973c1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Sep 2012 17:17:38 +0200 Subject: ARM: ux500: Add all known I2C sub-device nodes to the HREF DT Here we add the skeleton nodes for each of the known I2C sub-devices currently registered on ST-Ericsson's HREF Development Platform. We will fill these nodes in turn as the drivers are enabled for Device Tree. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 32cd7a03817d..1d2c642fece0 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -32,5 +32,34 @@ uart@80007000 { status = "okay"; }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + }; + + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; }; }; -- cgit v1.2.3-58-ga151 From 301c38590d1d437dc5d3c709145998676487d2d1 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Sep 2012 17:21:00 +0200 Subject: ARM: ux500: Add nodes for the MSP into the HREF Device Tree This patch enables the two important MSP devices for ST-Ericsson's hardware reference development board. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 1d2c642fece0..62ba5e80123d 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -61,5 +61,13 @@ reg = <0x33>; }; }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; }; }; -- cgit v1.2.3-58-ga151 From 73faf2b07feeabd874790baabe80f2f59b630ee9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Sep 2012 17:22:23 +0200 Subject: ARM: ux500: Add all encompassing sound node to the HREF Device Tree This is where we link together all of the SoC sound components for a given platform. This all encompassing sound node is only found in the very lowest hierarchical DTS file, since the component mix may well change from board variant to board variant. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 62ba5e80123d..e853882921ec 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -62,6 +62,13 @@ }; }; + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + msp1: msp@80124000 { status = "okay"; }; -- cgit v1.2.3-58-ga151 From 0ce89380ded57d96a9496c100e92acf55283011c Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 18 Sep 2012 17:26:48 +0200 Subject: ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT This property has no place here as the populated node is not related to a GPIO controller. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/snowball.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 29699971b5b3..702c0baa6004 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -127,7 +127,6 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; -- cgit v1.2.3-58-ga151 From 3cb920a15126be91de38d22d902e9cb18d3fbe49 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 19 Sep 2012 16:25:32 +0200 Subject: ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT This patch ensures the tc3589x and tc3598x-gpio devices are rightfully given interrupt controller status. We also describe the tc3598x-gpio GPIO expander in full and specify it as a GPIO controller. Finally we reference that the external MMC slot's Card Detection GPIO on the HREF is located on the tc3598x-gpio expander. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/hrefv60plus.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index e853882921ec..2131d77dc9c9 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -37,6 +37,21 @@ tc3589x@42 { compatible = "tc3589x"; reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; tps61052@33 { -- cgit v1.2.3-58-ga151 From c164fa62b93782165f12c0e8366f7b46507edb4d Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 7 Sep 2012 12:09:34 +0100 Subject: ARM: ux500: Fix SSP register address format SSP won't probe unless the specified register address format is correct i.e. we have to specify that the address is in hex. After this patch has been applied, the SSP (SPI) driver probes as expected. Acked-by: Linus Walleij Signed-off-by: Lee Jones --- arch/arm/boot/dts/dbx5x0.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 3708a6ba7ed3..748ba7aa746c 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -536,7 +536,7 @@ ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; - reg = <80002000 0x1000>; + reg = <0x80002000 0x1000>; interrupts = <0 14 0x4>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-58-ga151 From 2b8b15da668be78cd80eb2ee302f777423a82f7b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 20 Sep 2012 17:06:05 +0200 Subject: ARM: tegra: dts: Add pwm label PWM devices can be referenced in the DT by phandle and per-chip index. In order for this to work properly, the PWM controller needs to have a label attached to it. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 405d1673904e..67a6cd910b96 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -123,7 +123,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 3e4334d14efb..b1497c7d7d68 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; -- cgit v1.2.3-58-ga151 From 307e28ee374addbc59f0929d98a0b0d811e3323e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 20 Sep 2012 17:06:06 +0200 Subject: ARM: tegra: Add Avionic Design Tamonten support The Tamonten is an NVIDIA Tegra2 based system-on-module (SOM) that is designed to cover a broad range of applications. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-tamonten.dtsi | 449 ++++++++++++++++++++++++++++++++ 1 file changed, 449 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-tamonten.dtsi diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi new file mode 100644 index 000000000000..f18cec9f6a77 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -0,0 +1,449 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + clock-frequency = <216000000>; + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; -- cgit v1.2.3-58-ga151 From a3ee1293b1bec15e179b5a4c99fe07157de35202 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 20 Sep 2012 17:06:07 +0200 Subject: ARM: tegra: Add Avionic Design Plutux support The Plutux is a set-top box device based on the Tamonten SOM and can be connected to a display via HDMI. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-plutux.dts | 50 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 51 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-plutux.dts diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts new file mode 100644 index 000000000000..331a3ef24d59 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Plutux board"; + compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-plutux", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Plutux"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 6e3520725b06..63f1d61a4378 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -4,6 +4,7 @@ initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb -- cgit v1.2.3-58-ga151 From 731fb450ae029c1579dc45e559c1a778ff2f62d0 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 20 Sep 2012 17:06:08 +0200 Subject: ARM: tegra: Add Avionic Design Medcom-Wide support The Medcom is a 16:9 15" terminal that is used for patient infotainment in hospitals. Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-medcom-wide.dts | 58 +++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 59 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-medcom-wide.dts diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts new file mode 100644 index 000000000000..a2d6d6541f83 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Medcom-Wide board"; + compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-medcom-wide", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Medcom-Wide"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 63f1d61a4378..020548a20daa 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -3,6 +3,7 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb -- cgit v1.2.3-58-ga151 From 175f16fa38977dfed9f9fe247279516ce892fb15 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 20 Sep 2012 17:06:09 +0200 Subject: ARM: tegra: Add Avionic Design Tamonten Evaluation Carrier support The Tamonten Evaluation Carrier is an evaluation board for the Tamonten SOM. More information is available here: http://www.avionic-design.de/en/products/nvidia-tegra-tamonten-system-en/nvidia-tegra-tamonten-evboard-en.html Signed-off-by: Thierry Reding Signed-off-by: Stephen Warren --- arch/arm/boot/dts/tegra20-tec.dts | 53 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-tegra/Makefile.boot | 1 + 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-tec.dts diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts new file mode 100644 index 000000000000..9aff31b0fe4a --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten Evaluation Carrier"; + compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-tec", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design TEC"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index 020548a20daa..54c16aade475 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-medcom-wide.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-plutux.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb +dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-tec.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb -- cgit v1.2.3-58-ga151 From cb935e71577ad0fb5babe34c5494de6a0093693d Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Fri, 3 Aug 2012 20:54:16 +1200 Subject: arm: vt8500: Add device tree files for VIA/Wondermedia SoC's Add device tree files for VT8500, WM8505 and WM8650 SoC's and reference boards. Signed-off-by: Tony Prisk --- arch/arm/boot/dts/vt8500-bv07.dts | 36 ++++++++++ arch/arm/boot/dts/vt8500.dtsi | 116 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/wm8505-ref.dts | 36 ++++++++++ arch/arm/boot/dts/wm8505.dtsi | 143 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/wm8650-mid.dts | 36 ++++++++++ arch/arm/boot/dts/wm8650.dtsi | 147 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 514 insertions(+) create mode 100644 arch/arm/boot/dts/vt8500-bv07.dts create mode 100644 arch/arm/boot/dts/vt8500.dtsi create mode 100644 arch/arm/boot/dts/wm8505-ref.dts create mode 100644 arch/arm/boot/dts/wm8505.dtsi create mode 100644 arch/arm/boot/dts/wm8650-mid.dts create mode 100644 arch/arm/boot/dts/wm8650.dtsi diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts new file mode 100644 index 000000000000..567cf4e8ab84 --- /dev/null +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -0,0 +1,36 @@ +/* + * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "vt8500.dtsi" + +/ { + model = "Benign BV07 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi new file mode 100644 index 000000000000..d8645e990b21 --- /dev/null +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -0,0 +1,116 @@ +/* + * vt8500.dtsi - Device tree file for VIA VT8500 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "via,vt8500"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc>; + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts new file mode 100644 index 000000000000..fd4e248074c6 --- /dev/null +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -0,0 +1,36 @@ +/* + * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8505.dtsi" + +/ { + model = "Wondermedia WM8505 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <32>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi new file mode 100644 index 000000000000..b459691655ab --- /dev/null +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -0,0 +1,143 @@ +/* + * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8505"; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8505-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007100 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007100 0x200>; + interrupts = <43>; + }; + + uhci@d8007300 { + compatible = "platform-uhci"; + reg = <0xd8007300 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + uart@d8370000 { + compatible = "via,vt8500-uart"; + reg = <0xd8370000 0x1040>; + interrupts = <31>; + clocks = <&ref24>; + }; + + uart@d8380000 { + compatible = "via,vt8500-uart"; + reg = <0xd8380000 0x1040>; + interrupts = <30>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts new file mode 100644 index 000000000000..cefd938f842f --- /dev/null +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -0,0 +1,36 @@ +/* + * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8650.dtsi" + +/ { + model = "Wondermedia WM8650-MID Tablet"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi new file mode 100644 index 000000000000..83b9467559bb --- /dev/null +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -0,0 +1,147 @@ +/* + * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8650"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8650-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + arm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; -- cgit v1.2.3-58-ga151 From 7f4b48b363263d2b62e3d0adecf56045994e721d Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Fri, 3 Aug 2012 20:55:28 +1200 Subject: rtc: vt8500: Add devicetree support for vt8500-rtc Signed-off-by: Tony Prisk Reviewed-by: Linus Walleij --- drivers/rtc/rtc-vt8500.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c index 9e94fb147c26..07bf19364a74 100644 --- a/drivers/rtc/rtc-vt8500.c +++ b/drivers/rtc/rtc-vt8500.c @@ -23,6 +23,7 @@ #include #include #include +#include /* * Register definitions @@ -302,12 +303,18 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "via,vt8500-rtc", }, + {} +}; + static struct platform_driver vt8500_rtc_driver = { .probe = vt8500_rtc_probe, .remove = __devexit_p(vt8500_rtc_remove), .driver = { .name = "vt8500-rtc", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wmt_dt_ids), }, }; @@ -315,5 +322,5 @@ module_platform_driver(vt8500_rtc_driver); MODULE_AUTHOR("Alexey Charkov "); MODULE_DESCRIPTION("VIA VT8500 SoC Realtime Clock Driver (RTC)"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:vt8500-rtc"); -- cgit v1.2.3-58-ga151 From 4001130df1a74948cfa8be02b420953a84ab83e8 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Fri, 3 Aug 2012 20:56:25 +1200 Subject: serial: vt8500: Add devicetree support for vt8500-serial Increase vt8500_max_ports to 6 as the WM8505 as 6 available uarts. Use devicetree port id as primary addressing for ports but allow auto-allocation if id not specified. Signed-off-by: Tony Prisk Acked-by: Alan Cox --- drivers/tty/serial/vt8500_serial.c | 58 ++++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 2be006fb3da0..205d4cf4a063 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -34,6 +34,7 @@ #include #include #include +#include /* * UART Register offsets @@ -76,6 +77,8 @@ #define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) #define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) +#define VT8500_MAX_PORTS 6 + struct vt8500_port { struct uart_port uart; char name[16]; @@ -83,6 +86,13 @@ struct vt8500_port { unsigned int ier; }; +/* + * we use this variable to keep track of which ports + * have been allocated as we can't use pdev->id in + * devicetree + */ +static unsigned long vt8500_ports_in_use; + static inline void vt8500_write(struct uart_port *port, unsigned int val, unsigned int off) { @@ -431,7 +441,7 @@ static int vt8500_verify_port(struct uart_port *port, return 0; } -static struct vt8500_port *vt8500_uart_ports[4]; +static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS]; static struct uart_driver vt8500_uart_driver; #ifdef CONFIG_SERIAL_VT8500_CONSOLE @@ -548,7 +558,9 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev) { struct vt8500_port *vt8500_port; struct resource *mmres, *irqres; + struct device_node *np = pdev->dev.of_node; int ret; + int port; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); @@ -559,16 +571,46 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev) if (!vt8500_port) return -ENOMEM; + if (np) + port = of_alias_get_id(np, "serial"); + if (port > VT8500_MAX_PORTS) + port = -1; + else + port = -1; + + if (port < 0) { + /* calculate the port id */ + port = find_first_zero_bit(&vt8500_ports_in_use, + sizeof(vt8500_ports_in_use)); + } + + if (port > VT8500_MAX_PORTS) + return -ENODEV; + + /* reserve the port id */ + if (test_and_set_bit(port, &vt8500_ports_in_use)) { + /* port already in use - shouldn't really happen */ + return -EBUSY; + } + vt8500_port->uart.type = PORT_VT8500; vt8500_port->uart.iotype = UPIO_MEM; vt8500_port->uart.mapbase = mmres->start; vt8500_port->uart.irq = irqres->start; vt8500_port->uart.fifosize = 16; vt8500_port->uart.ops = &vt8500_uart_pops; - vt8500_port->uart.line = pdev->id; + vt8500_port->uart.line = port; vt8500_port->uart.dev = &pdev->dev; vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - vt8500_port->uart.uartclk = 24000000; + + vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0); + if (vt8500_port->clk) { + vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); + } else { + /* use the default of 24Mhz if not specified and warn */ + pr_warn("%s: serial clock source not specified\n", __func__); + vt8500_port->uart.uartclk = 24000000; + } snprintf(vt8500_port->name, sizeof(vt8500_port->name), "VT8500 UART%d", pdev->id); @@ -579,7 +621,7 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev) goto err; } - vt8500_uart_ports[pdev->id] = vt8500_port; + vt8500_uart_ports[port] = vt8500_port; uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart); @@ -603,12 +645,18 @@ static int __devexit vt8500_serial_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "via,vt8500-uart", }, + {} +}; + static struct platform_driver vt8500_platform_driver = { .probe = vt8500_serial_probe, .remove = __devexit_p(vt8500_serial_remove), .driver = { .name = "vt8500_serial", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(wmt_dt_ids), }, }; @@ -642,4 +690,4 @@ module_exit(vt8500_serial_exit); MODULE_AUTHOR("Alexey Charkov "); MODULE_DESCRIPTION("Driver for vt8500 serial device"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-58-ga151 From e7b995371fe1e29838321fcdc3cfe35bb0d6bfc4 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Fri, 3 Aug 2012 20:58:22 +1200 Subject: video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb Update vt8500-fb, wm8505-fb and wmt-ge-rops to support device tree bindings. Small change in wm8505-fb.c to support WM8650 framebuffer color format. Signed-off-by: Tony Prisk --- drivers/video/Kconfig | 6 +-- drivers/video/vt8500lcdfb.c | 79 +++++++++++++++++++++++++++++++----- drivers/video/wm8505fb.c | 97 ++++++++++++++++++++++++++++++++++++++------- drivers/video/wmt_ge_rops.c | 9 ++++- 4 files changed, 161 insertions(+), 30 deletions(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 0217f7415ef5..b66d951b8e32 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1788,7 +1788,7 @@ config FB_AU1200 config FB_VT8500 bool "VT8500 LCD Driver" - depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500 + depends on (FB = y) && ARM && ARCH_VT8500 select FB_WMT_GE_ROPS select FB_SYS_IMAGEBLIT help @@ -1797,11 +1797,11 @@ config FB_VT8500 config FB_WM8505 bool "WM8505 frame buffer support" - depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505 + depends on (FB = y) && ARM && ARCH_VT8500 select FB_WMT_GE_ROPS select FB_SYS_IMAGEBLIT help - This is the framebuffer driver for WonderMedia WM8505 + This is the framebuffer driver for WonderMedia WM8505/WM8650 integrated LCD controller. source "drivers/video/geode/Kconfig" diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c index 2a5fe6ede845..d24595cd0c9b 100644 --- a/drivers/video/vt8500lcdfb.c +++ b/drivers/video/vt8500lcdfb.c @@ -35,6 +35,13 @@ #include "vt8500lcdfb.h" #include "wmt_ge_rops.h" +#ifdef CONFIG_OF +#include +#include +#include +#endif + + #define to_vt8500lcd_info(__info) container_of(__info, \ struct vt8500lcd_info, fb) @@ -270,15 +277,21 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev) { struct vt8500lcd_info *fbi; struct resource *res; - struct vt8500fb_platform_data *pdata = pdev->dev.platform_data; void *addr; int irq, ret; + struct fb_videomode of_mode; + struct device_node *np; + u32 bpp; + dma_addr_t fb_mem_phys; + unsigned long fb_mem_len; + void *fb_mem_virt; + ret = -ENOMEM; fbi = NULL; - fbi = kzalloc(sizeof(struct vt8500lcd_info) + sizeof(u32) * 16, - GFP_KERNEL); + fbi = devm_kzalloc(&pdev->dev, sizeof(struct vt8500lcd_info) + + sizeof(u32) * 16, GFP_KERNEL); if (!fbi) { dev_err(&pdev->dev, "Failed to initialize framebuffer device\n"); ret = -ENOMEM; @@ -333,9 +346,45 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev) goto failed_free_res; } - fbi->fb.fix.smem_start = pdata->video_mem_phys; - fbi->fb.fix.smem_len = pdata->video_mem_len; - fbi->fb.screen_base = pdata->video_mem_virt; + np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0); + if (!np) { + pr_err("%s: No display description in Device Tree\n", __func__); + ret = -EINVAL; + goto failed_free_res; + } + + /* + * This code is copied from Sascha Hauer's of_videomode helper + * and can be replaced with a call to the helper once mainlined + */ + ret = 0; + ret |= of_property_read_u32(np, "hactive", &of_mode.xres); + ret |= of_property_read_u32(np, "vactive", &of_mode.yres); + ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin); + ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin); + ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len); + ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin); + ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin); + ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len); + ret |= of_property_read_u32(np, "bpp", &bpp); + if (ret) { + pr_err("%s: Unable to read display properties\n", __func__); + goto failed_free_res; + } + of_mode.vmode = FB_VMODE_NONINTERLACED; + + /* try allocating the framebuffer */ + fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8); + fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys, + GFP_KERNEL); + if (!fb_mem_virt) { + pr_err("%s: Failed to allocate framebuffer\n", __func__); + return -ENOMEM; + }; + + fbi->fb.fix.smem_start = fb_mem_phys; + fbi->fb.fix.smem_len = fb_mem_len; + fbi->fb.screen_base = fb_mem_virt; fbi->palette_size = PAGE_ALIGN(512); fbi->palette_cpu = dma_alloc_coherent(&pdev->dev, @@ -370,10 +419,11 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev) goto failed_free_irq; } - fb_videomode_to_var(&fbi->fb.var, &pdata->mode); - fbi->fb.var.bits_per_pixel = pdata->bpp; - fbi->fb.var.xres_virtual = pdata->xres_virtual; - fbi->fb.var.yres_virtual = pdata->yres_virtual; + fb_videomode_to_var(&fbi->fb.var, &of_mode); + + fbi->fb.var.xres_virtual = of_mode.xres; + fbi->fb.var.yres_virtual = of_mode.yres * 2; + fbi->fb.var.bits_per_pixel = bpp; ret = vt8500lcd_set_par(&fbi->fb); if (ret) { @@ -448,12 +498,18 @@ static int __devexit vt8500lcd_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id via_dt_ids[] = { + { .compatible = "via,vt8500-fb", }, + {} +}; + static struct platform_driver vt8500lcd_driver = { .probe = vt8500lcd_probe, .remove = __devexit_p(vt8500lcd_remove), .driver = { .owner = THIS_MODULE, .name = "vt8500-lcd", + .of_match_table = of_match_ptr(via_dt_ids), }, }; @@ -461,4 +517,5 @@ module_platform_driver(vt8500lcd_driver); MODULE_AUTHOR("Alexey Charkov "); MODULE_DESCRIPTION("LCD controller driver for VIA VT8500"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, via_dt_ids); diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c index c8703bd61b74..ec4742442103 100644 --- a/drivers/video/wm8505fb.c +++ b/drivers/video/wm8505fb.c @@ -28,6 +28,9 @@ #include #include #include +#include +#include +#include #include @@ -59,8 +62,12 @@ static int wm8505fb_init_hw(struct fb_info *info) writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR); writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1); - /* Set in-memory picture format to RGB 32bpp */ - writel(0x1c, fbi->regbase + WMT_GOVR_COLORSPACE); + /* + * Set in-memory picture format to RGB + * 0x31C sets the correct color mode (RGB565) for WM8650 + * Bit 8+9 (0x300) are ignored on WM8505 as reserved + */ + writel(0x31c, fbi->regbase + WMT_GOVR_COLORSPACE); writel(1, fbi->regbase + WMT_GOVR_COLORSPACE1); /* Virtual buffer size */ @@ -127,6 +134,18 @@ static int wm8505fb_set_par(struct fb_info *info) info->var.blue.msb_right = 0; info->fix.visual = FB_VISUAL_TRUECOLOR; info->fix.line_length = info->var.xres_virtual << 2; + } else if (info->var.bits_per_pixel == 16) { + info->var.red.offset = 11; + info->var.red.length = 5; + info->var.red.msb_right = 0; + info->var.green.offset = 5; + info->var.green.length = 6; + info->var.green.msb_right = 0; + info->var.blue.offset = 0; + info->var.blue.length = 5; + info->var.blue.msb_right = 0; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.line_length = info->var.xres_virtual << 1; } wm8505fb_set_timing(info); @@ -246,16 +265,20 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev) struct wm8505fb_info *fbi; struct resource *res; void *addr; - struct vt8500fb_platform_data *pdata; int ret; - pdata = pdev->dev.platform_data; + struct fb_videomode of_mode; + struct device_node *np; + u32 bpp; + dma_addr_t fb_mem_phys; + unsigned long fb_mem_len; + void *fb_mem_virt; ret = -ENOMEM; fbi = NULL; - fbi = kzalloc(sizeof(struct wm8505fb_info) + sizeof(u32) * 16, - GFP_KERNEL); + fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) + + sizeof(u32) * 16, GFP_KERNEL); if (!fbi) { dev_err(&pdev->dev, "Failed to initialize framebuffer device\n"); ret = -ENOMEM; @@ -305,21 +328,58 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev) goto failed_free_res; } - fb_videomode_to_var(&fbi->fb.var, &pdata->mode); + np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0); + if (!np) { + pr_err("%s: No display description in Device Tree\n", __func__); + ret = -EINVAL; + goto failed_free_res; + } + + /* + * This code is copied from Sascha Hauer's of_videomode helper + * and can be replaced with a call to the helper once mainlined + */ + ret = 0; + ret |= of_property_read_u32(np, "hactive", &of_mode.xres); + ret |= of_property_read_u32(np, "vactive", &of_mode.yres); + ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin); + ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin); + ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len); + ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin); + ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin); + ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len); + ret |= of_property_read_u32(np, "bpp", &bpp); + if (ret) { + pr_err("%s: Unable to read display properties\n", __func__); + goto failed_free_res; + } + + of_mode.vmode = FB_VMODE_NONINTERLACED; + fb_videomode_to_var(&fbi->fb.var, &of_mode); fbi->fb.var.nonstd = 0; fbi->fb.var.activate = FB_ACTIVATE_NOW; fbi->fb.var.height = -1; fbi->fb.var.width = -1; - fbi->fb.var.xres_virtual = pdata->xres_virtual; - fbi->fb.var.yres_virtual = pdata->yres_virtual; - fbi->fb.var.bits_per_pixel = pdata->bpp; - fbi->fb.fix.smem_start = pdata->video_mem_phys; - fbi->fb.fix.smem_len = pdata->video_mem_len; - fbi->fb.screen_base = pdata->video_mem_virt; - fbi->fb.screen_size = pdata->video_mem_len; + /* try allocating the framebuffer */ + fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8); + fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys, + GFP_KERNEL); + if (!fb_mem_virt) { + pr_err("%s: Failed to allocate framebuffer\n", __func__); + return -ENOMEM; + }; + + fbi->fb.var.xres_virtual = of_mode.xres; + fbi->fb.var.yres_virtual = of_mode.yres * 2; + fbi->fb.var.bits_per_pixel = bpp; + + fbi->fb.fix.smem_start = fb_mem_phys; + fbi->fb.fix.smem_len = fb_mem_len; + fbi->fb.screen_base = fb_mem_virt; + fbi->fb.screen_size = fb_mem_len; if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) { dev_err(&pdev->dev, "Failed to allocate color map\n"); @@ -395,12 +455,18 @@ static int __devexit wm8505fb_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "wm,wm8505-fb", }, + {} +}; + static struct platform_driver wm8505fb_driver = { .probe = wm8505fb_probe, .remove = __devexit_p(wm8505fb_remove), .driver = { .owner = THIS_MODULE, .name = DRIVER_NAME, + .of_match_table = of_match_ptr(wmt_dt_ids), }, }; @@ -408,4 +474,5 @@ module_platform_driver(wm8505fb_driver); MODULE_AUTHOR("Ed Spiridonov "); MODULE_DESCRIPTION("Framebuffer driver for WMT WM8505"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, wmt_dt_ids); diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c index 55be3865015b..ba025b4c7d09 100644 --- a/drivers/video/wmt_ge_rops.c +++ b/drivers/video/wmt_ge_rops.c @@ -158,12 +158,18 @@ static int __devexit wmt_ge_rops_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "wm,prizm-ge-rops", }, + { /* sentinel */ } +}; + static struct platform_driver wmt_ge_rops_driver = { .probe = wmt_ge_rops_probe, .remove = __devexit_p(wmt_ge_rops_remove), .driver = { .owner = THIS_MODULE, .name = "wmt_ge_rops", + .of_match_table = of_match_ptr(wmt_dt_ids), }, }; @@ -172,4 +178,5 @@ module_platform_driver(wmt_ge_rops_driver); MODULE_AUTHOR("Alexey Charkov Date: Wed, 22 Aug 2012 02:01:39 +1200 Subject: arm: vt8500: clk: Add Common Clock Framework support This patch adds common clock framework support for arch-vt8500. Support for PLL and device clocks on VT8500, WM8505 and WM8650 are included. Signed-off-by: Tony Prisk Acked-by: Mike Turquette --- drivers/clk/Makefile | 1 + drivers/clk/clk-vt8500.c | 510 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 511 insertions(+) create mode 100644 drivers/clk/clk-vt8500.c diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5869ea387054..42fb17367f78 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_ARCH_INTEGRATOR) += versatile/ +obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c new file mode 100644 index 000000000000..a885600f5270 --- /dev/null +++ b/drivers/clk/clk-vt8500.c @@ -0,0 +1,510 @@ +/* + * Clock implementation for VIA/Wondermedia SoC's + * Copyright (C) 2012 Tony Prisk + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include + +/* All clocks share the same lock as none can be changed concurrently */ +static DEFINE_SPINLOCK(_lock); + +struct clk_device { + struct clk_hw hw; + void __iomem *div_reg; + unsigned int div_mask; + void __iomem *en_reg; + int en_bit; + spinlock_t *lock; +}; + +/* + * Add new PLL_TYPE_x definitions here as required. Use the first known model + * to support the new type as the name. + * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and + * vtwm_pll_set_rate() to handle the new PLL_TYPE_x + */ + +#define PLL_TYPE_VT8500 0 +#define PLL_TYPE_WM8650 1 + +struct clk_pll { + struct clk_hw hw; + void __iomem *reg; + spinlock_t *lock; + int type; +}; + +static void __iomem *pmc_base; + +#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw) + +#define VT8500_PMC_BUSY_MASK 0x18 + +static void vt8500_pmc_wait_busy(void) +{ + while (readl(pmc_base) & VT8500_PMC_BUSY_MASK) + cpu_relax(); +} + +static int vt8500_dclk_enable(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val; + unsigned long flags = 0; + + spin_lock_irqsave(cdev->lock, flags); + + en_val = readl(cdev->en_reg); + en_val |= BIT(cdev->en_bit); + writel(en_val, cdev->en_reg); + + spin_unlock_irqrestore(cdev->lock, flags); + return 0; +} + +static void vt8500_dclk_disable(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val; + unsigned long flags = 0; + + spin_lock_irqsave(cdev->lock, flags); + + en_val = readl(cdev->en_reg); + en_val &= ~BIT(cdev->en_bit); + writel(en_val, cdev->en_reg); + + spin_unlock_irqrestore(cdev->lock, flags); +} + +static int vt8500_dclk_is_enabled(struct clk_hw *hw) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit)); + + return en_val ? 1 : 0; +} + +static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 div = readl(cdev->div_reg) & cdev->div_mask; + + /* Special case for SDMMC devices */ + if ((cdev->div_mask == 0x3F) && (div & BIT(5))) + div = 64 * (div & 0x1f); + + /* div == 0 is actually the highest divisor */ + if (div == 0) + div = (cdev->div_mask + 1); + + return parent_rate / div; +} + +static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 divisor = *prate / rate; + + return *prate / divisor; +} + +static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_device *cdev = to_clk_device(hw); + u32 divisor = parent_rate / rate; + unsigned long flags = 0; + + if (divisor == cdev->div_mask + 1) + divisor = 0; + + if (divisor > cdev->div_mask) { + pr_err("%s: invalid divisor for clock\n", __func__); + return -EINVAL; + } + + spin_lock_irqsave(cdev->lock, flags); + + vt8500_pmc_wait_busy(); + writel(divisor, cdev->div_reg); + vt8500_pmc_wait_busy(); + + spin_lock_irqsave(cdev->lock, flags); + + return 0; +} + + +static const struct clk_ops vt8500_gated_clk_ops = { + .enable = vt8500_dclk_enable, + .disable = vt8500_dclk_disable, + .is_enabled = vt8500_dclk_is_enabled, +}; + +static const struct clk_ops vt8500_divisor_clk_ops = { + .round_rate = vt8500_dclk_round_rate, + .set_rate = vt8500_dclk_set_rate, + .recalc_rate = vt8500_dclk_recalc_rate, +}; + +static const struct clk_ops vt8500_gated_divisor_clk_ops = { + .enable = vt8500_dclk_enable, + .disable = vt8500_dclk_disable, + .is_enabled = vt8500_dclk_is_enabled, + .round_rate = vt8500_dclk_round_rate, + .set_rate = vt8500_dclk_set_rate, + .recalc_rate = vt8500_dclk_recalc_rate, +}; + +#define CLK_INIT_GATED BIT(0) +#define CLK_INIT_DIVISOR BIT(1) +#define CLK_INIT_GATED_DIVISOR (CLK_INIT_DIVISOR | CLK_INIT_GATED) + +static __init void vtwm_device_clk_init(struct device_node *node) +{ + u32 en_reg, div_reg; + struct clk *clk; + struct clk_device *dev_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + int clk_init_flags = 0; + + dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL); + if (WARN_ON(!dev_clk)) + return; + + dev_clk->lock = &_lock; + + rc = of_property_read_u32(node, "enable-reg", &en_reg); + if (!rc) { + dev_clk->en_reg = pmc_base + en_reg; + rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit); + if (rc) { + pr_err("%s: enable-bit property required for gated clock\n", + __func__); + return; + } + clk_init_flags |= CLK_INIT_GATED; + } + + rc = of_property_read_u32(node, "divisor-reg", &div_reg); + if (!rc) { + dev_clk->div_reg = pmc_base + div_reg; + /* + * use 0x1f as the default mask since it covers + * almost all the clocks and reduces dts properties + */ + dev_clk->div_mask = 0x1f; + + of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask); + clk_init_flags |= CLK_INIT_DIVISOR; + } + + of_property_read_string(node, "clock-output-names", &clk_name); + + switch (clk_init_flags) { + case CLK_INIT_GATED: + init.ops = &vt8500_gated_clk_ops; + break; + case CLK_INIT_DIVISOR: + init.ops = &vt8500_divisor_clk_ops; + break; + case CLK_INIT_GATED_DIVISOR: + init.ops = &vt8500_gated_divisor_clk_ops; + break; + default: + pr_err("%s: Invalid clock description in device tree\n", + __func__); + kfree(dev_clk); + return; + } + + init.name = clk_name; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + dev_clk->hw.init = &init; + + clk = clk_register(NULL, &dev_clk->hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(dev_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); +} + + +/* PLL clock related functions */ + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +/* Helper macros for PLL_VT8500 */ +#define VT8500_PLL_MUL(x) ((x & 0x1F) << 1) +#define VT8500_PLL_DIV(x) ((x & 0x100) ? 1 : 2) + +#define VT8500_BITS_TO_FREQ(r, m, d) \ + ((r / d) * m) + +#define VT8500_BITS_TO_VAL(m, d) \ + ((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F)) + +/* Helper macros for PLL_WM8650 */ +#define WM8650_PLL_MUL(x) (x & 0x3FF) +#define WM8650_PLL_DIV(x) (((x >> 10) & 7) * (1 << ((x >> 13) & 3))) + +#define WM8650_BITS_TO_FREQ(r, m, d1, d2) \ + (r * m / (d1 * (1 << d2))) + +#define WM8650_BITS_TO_VAL(m, d1, d2) \ + ((d2 << 13) | (d1 << 10) | (m & 0x3FF)) + + +static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate, + u32 *multiplier, u32 *prediv) +{ + unsigned long tclk; + + /* sanity check */ + if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) { + pr_err("%s: requested rate out of range\n", __func__); + *multiplier = 0; + *prediv = 1; + return; + } + if (rate <= parent_rate * 31) + /* use the prediv to double the resolution */ + *prediv = 2; + else + *prediv = 1; + + *multiplier = rate / (parent_rate / *prediv); + tclk = (parent_rate / *prediv) * *multiplier; + + if (tclk != rate) + pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, + rate, tclk); +} + +static void wm8650_find_pll_bits(unsigned long rate, unsigned long parent_rate, + u32 *multiplier, u32 *divisor1, u32 *divisor2) +{ + u32 mul, div1, div2; + u32 best_mul, best_div1, best_div2; + unsigned long tclk, rate_err, best_err; + + best_err = (unsigned long)-1; + + /* Find the closest match (lower or equal to requested) */ + for (div1 = 5; div1 >= 3; div1--) + for (div2 = 3; div2 >= 0; div2--) + for (mul = 3; mul <= 1023; mul++) { + tclk = parent_rate * mul / (div1 * (1 << div2)); + if (tclk > rate) + continue; + /* error will always be +ve */ + rate_err = rate - tclk; + if (rate_err == 0) { + *multiplier = mul; + *divisor1 = div1; + *divisor2 = div2; + return; + } + + if (rate_err < best_err) { + best_err = rate_err; + best_mul = mul; + best_div1 = div1; + best_div2 = div2; + } + } + + /* if we got here, it wasn't an exact match */ + pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate, + rate - best_err); + *multiplier = mul; + *divisor1 = div1; + *divisor2 = div2; +} + +static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 mul, div1, div2; + u32 pll_val; + unsigned long flags = 0; + + /* sanity check */ + + switch (pll->type) { + case PLL_TYPE_VT8500: + vt8500_find_pll_bits(rate, parent_rate, &mul, &div1); + pll_val = VT8500_BITS_TO_VAL(mul, div1); + break; + case PLL_TYPE_WM8650: + wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2); + pll_val = WM8650_BITS_TO_VAL(mul, div1, div2); + break; + default: + pr_err("%s: invalid pll type\n", __func__); + return 0; + } + + spin_lock_irqsave(pll->lock, flags); + + vt8500_pmc_wait_busy(); + writel(pll_val, pll->reg); + vt8500_pmc_wait_busy(); + + spin_unlock_irqrestore(pll->lock, flags); + + return 0; +} + +static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 mul, div1, div2; + long round_rate; + + switch (pll->type) { + case PLL_TYPE_VT8500: + vt8500_find_pll_bits(rate, *prate, &mul, &div1); + round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1); + break; + case PLL_TYPE_WM8650: + wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2); + round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2); + break; + default: + round_rate = 0; + } + + return round_rate; +} + +static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + u32 pll_val = readl(pll->reg); + unsigned long pll_freq; + + switch (pll->type) { + case PLL_TYPE_VT8500: + pll_freq = parent_rate * VT8500_PLL_MUL(pll_val); + pll_freq /= VT8500_PLL_DIV(pll_val); + break; + case PLL_TYPE_WM8650: + pll_freq = parent_rate * WM8650_PLL_MUL(pll_val); + pll_freq /= WM8650_PLL_DIV(pll_val); + break; + default: + pll_freq = 0; + } + + return pll_freq; +} + +const struct clk_ops vtwm_pll_ops = { + .round_rate = vtwm_pll_round_rate, + .set_rate = vtwm_pll_set_rate, + .recalc_rate = vtwm_pll_recalc_rate, +}; + +static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type) +{ + u32 reg; + struct clk *clk; + struct clk_pll *pll_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + + rc = of_property_read_u32(node, "reg", ®); + if (WARN_ON(rc)) + return; + + pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); + if (WARN_ON(!pll_clk)) + return; + + pll_clk->reg = pmc_base + reg; + pll_clk->lock = &_lock; + pll_clk->type = pll_type; + + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = &vtwm_pll_ops; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + pll_clk->hw.init = &init; + + clk = clk_register(NULL, &pll_clk->hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(pll_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); +} + + +/* Wrappers for initialization functions */ + +static void __init vt8500_pll_init(struct device_node *node) +{ + vtwm_pll_clk_init(node, PLL_TYPE_VT8500); +} + +static void __init wm8650_pll_init(struct device_node *node) +{ + vtwm_pll_clk_init(node, PLL_TYPE_WM8650); +} + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, }, + { .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, }, + { .compatible = "via,vt8500-device-clock", + .data = vtwm_device_clk_init, }, + { /* sentinel */ } +}; + +void __init vtwm_clk_init(void __iomem *base) +{ + if (!base) + return; + + pmc_base = base; + + of_clk_init(clk_match); +} -- cgit v1.2.3-58-ga151 From 95e9fd10f06cb5642028b6b851e32b8c8afb4571 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 4 Aug 2012 16:04:56 +1200 Subject: arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices Bindings for gpio, interrupt controller, power management controller, timer, realtime clock, serial uart, ehci and uhci controllers and framebuffer controllers used on the arch-vt8500 platform. Framebuffer binding also specifies a 'display' node which is required for determining the lcd panel data. Signed-off-by: Tony Prisk --- Documentation/devicetree/bindings/arm/vt8500.txt | 14 +++++ .../bindings/arm/vt8500/via,vt8500-intc.txt | 16 +++++ .../bindings/arm/vt8500/via,vt8500-pmc.txt | 13 ++++ .../bindings/arm/vt8500/via,vt8500-timer.txt | 15 +++++ Documentation/devicetree/bindings/clock/vt8500.txt | 72 ++++++++++++++++++++++ .../devicetree/bindings/gpio/gpio-vt8500.txt | 24 ++++++++ .../devicetree/bindings/rtc/via,vt8500-rtc.txt | 15 +++++ .../bindings/tty/serial/via,vt8500-uart.txt | 17 +++++ .../devicetree/bindings/usb/platform-uhci.txt | 15 +++++ .../devicetree/bindings/usb/via,vt8500-ehci.txt | 15 +++++ .../devicetree/bindings/vendor-prefixes.txt | 2 + .../devicetree/bindings/video/via,vt8500-fb.txt | 62 +++++++++++++++++++ .../devicetree/bindings/video/wm,prizm-ge-rops.txt | 13 ++++ .../devicetree/bindings/video/wm,wm8505-fb.txt | 23 +++++++ 14 files changed, 316 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/vt8500.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt create mode 100644 Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt create mode 100644 Documentation/devicetree/bindings/clock/vt8500.txt create mode 100644 Documentation/devicetree/bindings/gpio/gpio-vt8500.txt create mode 100644 Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt create mode 100644 Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt create mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt create mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt create mode 100644 Documentation/devicetree/bindings/video/via,vt8500-fb.txt create mode 100644 Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt create mode 100644 Documentation/devicetree/bindings/video/wm,wm8505-fb.txt diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt new file mode 100644 index 000000000000..d657832c6819 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.txt @@ -0,0 +1,14 @@ +VIA/Wondermedia VT8500 Platforms Device Tree Bindings +--------------------------------------- + +Boards with the VIA VT8500 SoC shall have the following properties: +Required root node property: +compatible = "via,vt8500"; + +Boards with the Wondermedia WM8505 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8505"; + +Boards with the Wondermedia WM8650 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8650"; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt new file mode 100644 index 000000000000..0a4ce1051b02 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt @@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt new file mode 100644 index 000000000000..521b9c7de933 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia VT8500 Power Management Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-pmc" +- reg : Should contain 1 register ranges(address and length) + +Example: + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt new file mode 100644 index 000000000000..901c73f0d8ef --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Timer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-timer" +- reg : Should contain 1 register ranges(address and length) +- interrupts : interrupt for the timer + +Example: + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt new file mode 100644 index 000000000000..a880c70d0047 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vt8500.txt @@ -0,0 +1,72 @@ +Device Tree Clock bindings for arch-vt8500 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock + "wm,wm8650-pll-clock" - for a WM8650 PLL clock + "via,vt8500-device-clock" - for a VT/WM device clock + +Required properties for PLL clocks: +- reg : shall be the control register offset from PMC base for the pll clock. +- clocks : shall be the input parent clock phandle for the clock. This should + be the reference clock. +- #clock-cells : from common clock binding; shall be set to 0. + +Required properties for device clocks: +- clocks : shall be the input parent clock phandle for the clock. This should + be a pll output. +- #clock-cells : from common clock binding; shall be set to 0. + + +Device Clocks + +Device clocks are required to have one or both of the following sets of +properties: + + +Gated device clocks: + +Required properties: +- enable-reg : shall be the register offset from PMC base for the enable + register. +- enable-bit : shall be the bit within enable-reg to enable/disable the clock. + + +Divisor device clocks: + +Required property: +- divisor-reg : shall be the register offset from PMC base for the divisor + register. +Optional property: +- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f + if not specified. + + +For example: + +ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; +}; + +plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; +}; + +sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt new file mode 100644 index 000000000000..f4dc5233167e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt @@ -0,0 +1,24 @@ +VIA/Wondermedia VT8500 GPIO Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" + or "wm,wm8650-gpio" depending on your SoC +- reg : Should contain 1 register range (address and length) +- #gpio-cells : should be <3>. + 1) bank + 2) pin number + 3) flags - should be 0 + +Example: + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + vibrate { + gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ + }; diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt new file mode 100644 index 000000000000..3c0484c49582 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Realtime Clock Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-rtc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : alarm interrupt + +Example: + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt new file mode 100644 index 000000000000..5feef1ef167d --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt @@ -0,0 +1,17 @@ +VIA/Wondermedia VT8500 UART Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-uart" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UART interrupt +- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) + +Example: + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt new file mode 100644 index 000000000000..a4fb0719d157 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt @@ -0,0 +1,15 @@ +Generic Platform UHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "platform-uhci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UHCI controller interrupt + +Example: + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt new file mode 100644 index 000000000000..17b3ad1d97e7 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 EHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-ehci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : ehci controller interrupt + +Example: + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index db4d3af3643c..5c63da29aa05 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -47,5 +47,7 @@ sirf SiRF Technology, Inc. st STMicroelectronics stericsson ST-Ericsson ti Texas Instruments +via VIA Technologies, Inc. wlf Wolfson Microelectronics +wm Wondermedia Technologies, Inc. xlnx Xilinx diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt new file mode 100644 index 000000000000..c870b6478ec8 --- /dev/null +++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt @@ -0,0 +1,62 @@ +VIA VT8500 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-fb" +- reg : Should contain 1 register ranges(address and length) +- interrupts : framebuffer controller interrupt +- display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. +- default-mode: a videomode within the display with timing parameters + as specified below. + +Example: + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + +VIA VT8500 Display +----------------------------------------------------- +Required properties (as per of_videomode_helper): + + - hactive, vactive: Display resolution + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters + in pixels + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in + lines + - clock: displayclock in Hz + - bpp: lcd panel bit-depth. + <16> for RGB565, <32> for RGB888 + +Optional properties (as per of_videomode_helper): + - width-mm, height-mm: Display dimensions in mm + - hsync-active-high (bool): Hsync pulse is active high + - vsync-active-high (bool): Vsync pulse is active high + - interlaced (bool): This is an interlaced mode + - doublescan (bool): This is a doublescan mode + +Example: + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt new file mode 100644 index 000000000000..a850fa011f02 --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia Graphics Engine Controller +----------------------------------------------------- + +Required properties: +- compatible : "wm,prizm-ge-rops" +- reg : Should contain 1 register ranges(address and length) + +Example: + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt new file mode 100644 index 000000000000..3d325e1d11ee --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt @@ -0,0 +1,23 @@ +Wondermedia WM8505 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "wm,wm8505-fb" +- reg : Should contain 1 register ranges(address and length) +- via,display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. See definition in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt +- default-mode: a videomode node as specified in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt + +Example: + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; -- cgit v1.2.3-58-ga151 From 4e48b1c56019868b34efcd0e2334b7cdfac14092 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Wed, 8 Aug 2012 13:05:55 +1200 Subject: arm: vt8500: gpio: Devicetree support for arch-vt8500 Converted the existing arch-vt8500 gpio to a platform_device. Added support for WM8505 and WM8650 GPIO controllers. Replaced existing readl/writel calls with _relaxed variants. Replaced existing unsigned variables with u32 to match register size. Signed-off-by: Tony Prisk Reviewed-by: Linus Walleij --- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-vt8500.c | 316 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 323 insertions(+) create mode 100644 drivers/gpio/gpio-vt8500.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ba7926f5c099..a00b828b1643 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -183,6 +183,12 @@ config GPIO_STA2X11 Say yes here to support the STA2x11/ConneXt GPIO device. The GPIO module has 128 GPIO pins with alternate functions. +config GPIO_VT8500 + bool "VIA/Wondermedia SoC GPIO Support" + depends on ARCH_VT8500 + help + Say yes here to support the VT8500/WM8505/WM8650 GPIO controller. + config GPIO_XILINX bool "Xilinx GPIO support" depends on PPC_OF || MICROBLAZE diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 153caceeb053..a288142ad998 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o +obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c new file mode 100644 index 000000000000..bcd8e4aa7c7d --- /dev/null +++ b/drivers/gpio/gpio-vt8500.c @@ -0,0 +1,316 @@ +/* drivers/gpio/gpio-vt8500.c + * + * Copyright (C) 2012 Tony Prisk + * Based on arch/arm/mach-vt8500/gpio.c: + * - Copyright (C) 2010 Alexey Charkov + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + We handle GPIOs by bank, each bank containing up to 32 GPIOs covered + by one set of registers (although not all may be valid). + + Because different SoC's have different register offsets, we pass the + register offsets as data in vt8500_gpio_dt_ids[]. + + A value of NO_REG is used to indicate that this register is not + supported. Only used for ->en at the moment. +*/ + +#define NO_REG 0xFFFF + +/* + * struct vt8500_gpio_bank_regoffsets + * @en: offset to enable register of the bank + * @dir: offset to direction register of the bank + * @data_out: offset to the data out register of the bank + * @data_in: offset to the data in register of the bank + * @ngpio: highest valid pin in this bank + */ + +struct vt8500_gpio_bank_regoffsets { + unsigned int en; + unsigned int dir; + unsigned int data_out; + unsigned int data_in; + unsigned char ngpio; +}; + +struct vt8500_gpio_data { + unsigned int num_banks; + struct vt8500_gpio_bank_regoffsets banks[]; +}; + +#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \ +{ \ + .en = __en, \ + .dir = __dir, \ + .data_out = __out, \ + .data_in = __in, \ + .ngpio = __ngpio, \ +} + +static struct vt8500_gpio_data vt8500_data = { + .num_banks = 7, + .banks = { + VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26), + VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28), + VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31), + VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19), + VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19), + VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23), + VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9), + }, +}; + +static struct vt8500_gpio_data wm8505_data = { + .num_banks = 10, + .banks = { + VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8), + VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32), + VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6), + VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16), + VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25), + VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5), + VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5), + VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12), + VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16), + VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22), + }, +}; + +/* + * No information about which bits are valid so we just make + * them all available until its figured out. + */ +static struct vt8500_gpio_data wm8650_data = { + .num_banks = 9, + .banks = { + VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32), + VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32), + VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32), + VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32), + VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32), + VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32), + VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32), + VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32), + VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32), + }, +}; + +struct vt8500_gpio_chip { + struct gpio_chip chip; + + const struct vt8500_gpio_bank_regoffsets *regs; + void __iomem *base; +}; + + +#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip) + +static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + u32 val; + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + if (vt8500_chip->regs->en == NO_REG) + return 0; + + val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); + val |= BIT(offset); + writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); + + return 0; +} + +static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + u32 val; + + if (vt8500_chip->regs->en == NO_REG) + return; + + val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en); + val &= ~BIT(offset); + writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en); +} + +static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); + val &= ~BIT(offset); + writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); + + return 0; +} + +static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir); + val |= BIT(offset); + writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir); + + if (value) { + val = readl_relaxed(vt8500_chip->base + + vt8500_chip->regs->data_out); + val |= BIT(offset); + writel_relaxed(val, vt8500_chip->base + + vt8500_chip->regs->data_out); + } + return 0; +} + +static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >> + offset) & 1; +} + +static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); + + u32 val = readl_relaxed(vt8500_chip->base + + vt8500_chip->regs->data_out); + if (value) + val |= BIT(offset); + else + val &= ~BIT(offset); + + writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out); +} + +static int vt8500_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, u32 *flags) +{ + /* bank if specificed in gpiospec->args[0] */ + if (flags) + *flags = gpiospec->args[2]; + + return gpiospec->args[1]; +} + +static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base, + const struct vt8500_gpio_data *data) +{ + struct vt8500_gpio_chip *vtchip; + struct gpio_chip *chip; + int i; + int pin_cnt = 0; + + vtchip = devm_kzalloc(&pdev->dev, + sizeof(struct vt8500_gpio_chip) * data->num_banks, + GFP_KERNEL); + if (!vtchip) { + pr_err("%s: failed to allocate chip memory\n", __func__); + return -ENOMEM; + } + + for (i = 0; i < data->num_banks; i++) { + vtchip[i].base = base; + vtchip[i].regs = &data->banks[i]; + + chip = &vtchip[i].chip; + + chip->of_xlate = vt8500_of_xlate; + chip->of_gpio_n_cells = 3; + chip->of_node = pdev->dev.of_node; + + chip->request = vt8500_gpio_request; + chip->free = vt8500_gpio_free; + chip->direction_input = vt8500_gpio_direction_input; + chip->direction_output = vt8500_gpio_direction_output; + chip->get = vt8500_gpio_get_value; + chip->set = vt8500_gpio_set_value; + chip->can_sleep = 0; + chip->base = pin_cnt; + chip->ngpio = data->banks[i].ngpio; + + pin_cnt += data->banks[i].ngpio; + + gpiochip_add(chip); + } + return 0; +} + +static struct of_device_id vt8500_gpio_dt_ids[] = { + { .compatible = "via,vt8500-gpio", .data = &vt8500_data, }, + { .compatible = "wm,wm8505-gpio", .data = &wm8505_data, }, + { .compatible = "wm,wm8650-gpio", .data = &wm8650_data, }, + { /* Sentinel */ }, +}; + +static int __devinit vt8500_gpio_probe(struct platform_device *pdev) +{ + void __iomem *gpio_base; + struct device_node *np; + const struct of_device_id *of_id = + of_match_device(vt8500_gpio_dt_ids, &pdev->dev); + + if (!of_id) { + dev_err(&pdev->dev, "Failed to find gpio controller\n"); + return -ENODEV; + } + + np = pdev->dev.of_node; + if (!np) { + dev_err(&pdev->dev, "Missing GPIO description in devicetree\n"); + return -EFAULT; + } + + gpio_base = of_iomap(np, 0); + if (!gpio_base) { + dev_err(&pdev->dev, "Unable to map GPIO registers\n"); + of_node_put(np); + return -ENOMEM; + } + + vt8500_add_chips(pdev, gpio_base, of_id->data); + + return 0; +} + +static struct platform_driver vt8500_gpio_driver = { + .probe = vt8500_gpio_probe, + .driver = { + .name = "vt8500-gpio", + .owner = THIS_MODULE, + .of_match_table = vt8500_gpio_dt_ids, + }, +}; + +module_platform_driver(vt8500_gpio_driver); + +MODULE_DESCRIPTION("VT8500 GPIO Driver"); +MODULE_AUTHOR("Tony Prisk "); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids); -- cgit v1.2.3-58-ga151 From e9a91de7602a0a6999f23a2981db68b69aa695a7 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Fri, 3 Aug 2012 21:00:06 +1200 Subject: arm: vt8500: Update arch-vt8500 to devicetree support. Merged existing board files to a single dt-capable file. Converted irq and timer code to devicetree. Removed existing device files that are no longer required with devicetree support. All existing platform devices are converted to devicetree nodes except PWM. Removed restart.c and moved code into vt8500.c to remove duplicate PMC code. Signed-off-by: Tony Prisk Acked-by: Arnd Bergmann --- arch/arm/Kconfig | 7 +- arch/arm/mach-vt8500/Kconfig | 73 ------- arch/arm/mach-vt8500/Makefile | 8 +- arch/arm/mach-vt8500/bv07.c | 80 ------- arch/arm/mach-vt8500/common.h | 28 +++ arch/arm/mach-vt8500/devices-vt8500.c | 91 -------- arch/arm/mach-vt8500/devices-wm8505.c | 99 --------- arch/arm/mach-vt8500/devices.c | 270 ------------------------ arch/arm/mach-vt8500/devices.h | 88 -------- arch/arm/mach-vt8500/gpio.c | 240 --------------------- arch/arm/mach-vt8500/include/mach/restart.h | 4 +- arch/arm/mach-vt8500/include/mach/vt8500_irqs.h | 88 -------- arch/arm/mach-vt8500/include/mach/vt8500_regs.h | 79 ------- arch/arm/mach-vt8500/include/mach/wm8505_irqs.h | 115 ---------- arch/arm/mach-vt8500/include/mach/wm8505_regs.h | 78 ------- arch/arm/mach-vt8500/irq.c | 209 ++++++++++-------- arch/arm/mach-vt8500/restart.c | 54 ----- arch/arm/mach-vt8500/timer.c | 67 ++++-- arch/arm/mach-vt8500/vt8500.c | 196 +++++++++++++++++ arch/arm/mach-vt8500/wm8505_7in.c | 79 ------- 20 files changed, 405 insertions(+), 1548 deletions(-) delete mode 100644 arch/arm/mach-vt8500/Kconfig delete mode 100644 arch/arm/mach-vt8500/bv07.c create mode 100644 arch/arm/mach-vt8500/common.h delete mode 100644 arch/arm/mach-vt8500/devices-vt8500.c delete mode 100644 arch/arm/mach-vt8500/devices-wm8505.c delete mode 100644 arch/arm/mach-vt8500/devices.c delete mode 100644 arch/arm/mach-vt8500/devices.h delete mode 100644 arch/arm/mach-vt8500/gpio.c delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/vt8500_regs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_irqs.h delete mode 100644 arch/arm/mach-vt8500/include/mach/wm8505_regs.h delete mode 100644 arch/arm/mach-vt8500/restart.c create mode 100644 arch/arm/mach-vt8500/vt8500.c delete mode 100644 arch/arm/mach-vt8500/wm8505_7in.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2f88d8d97701..26f7e3b4373c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1005,6 +1005,10 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB + select USE_OF + select COMMON_CLK + select HAVE_CLK + select CLKDEV_LOOKUP help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. @@ -1129,8 +1133,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-vt8500/Kconfig" - source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -1623,6 +1625,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 288 if ARCH_VT8500 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig deleted file mode 100644 index 2c20a341c11a..000000000000 --- a/arch/arm/mach-vt8500/Kconfig +++ /dev/null @@ -1,73 +0,0 @@ -if ARCH_VT8500 - -config VTWM_VERSION_VT8500 - bool - -config VTWM_VERSION_WM8505 - bool - -config MACH_BV07 - bool "Benign BV07-8500 Mini Netbook" - depends on ARCH_VT8500 - select VTWM_VERSION_VT8500 - help - Add support for the inexpensive 7-inch netbooks sold by many - Chinese distributors under various names. Note that there are - many hardware implementations in identical exterior, make sure - that yours is indeed based on a VIA VT8500 chip. - -config MACH_WM8505_7IN_NETBOOK - bool "WM8505 7-inch generic netbook" - depends on ARCH_VT8500 - select VTWM_VERSION_WM8505 - help - Add support for the inexpensive 7-inch netbooks sold by many - Chinese distributors under various names. Note that there are - many hardware implementations in identical exterior, make sure - that yours is indeed based on a WonderMedia WM8505 chip. - -comment "LCD panel size" - -config WMT_PANEL_800X480 - bool "7-inch with 800x480 resolution" - depends on (FB_VT8500 || FB_WM8505) - default y - help - These are found in most of the netbooks in generic cases, as - well as in Eken M001 tablets and possibly elsewhere. - - To select this panel at runtime, say y here and append - 'panel=800x480' to your kernel command line. Otherwise, the - largest one available will be used. - -config WMT_PANEL_800X600 - bool "8-inch with 800x600 resolution" - depends on (FB_VT8500 || FB_WM8505) - help - These are found in Eken M003 tablets and possibly elsewhere. - - To select this panel at runtime, say y here and append - 'panel=800x600' to your kernel command line. Otherwise, the - largest one available will be used. - -config WMT_PANEL_1024X576 - bool "10-inch with 1024x576 resolution" - depends on (FB_VT8500 || FB_WM8505) - help - These are found in CherryPal netbooks and possibly elsewhere. - - To select this panel at runtime, say y here and append - 'panel=1024x576' to your kernel command line. Otherwise, the - largest one available will be used. - -config WMT_PANEL_1024X600 - bool "10-inch with 1024x600 resolution" - depends on (FB_VT8500 || FB_WM8505) - help - These are found in Eken M006 tablets and possibly elsewhere. - - To select this panel at runtime, say y here and append - 'panel=1024x600' to your kernel command line. Otherwise, the - largest one available will be used. - -endif diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile index 7ce51767c99c..e035251cda48 100644 --- a/arch/arm/mach-vt8500/Makefile +++ b/arch/arm/mach-vt8500/Makefile @@ -1,7 +1 @@ -obj-y += devices.o gpio.o irq.o timer.o restart.o - -obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o -obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o - -obj-$(CONFIG_MACH_BV07) += bv07.o -obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o +obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c deleted file mode 100644 index f9fbeb2d10e9..000000000000 --- a/arch/arm/mach-vt8500/bv07.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-vt8500/bv07.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include - -#include -#include -#include - -#include "devices.h" - -static void __iomem *pmc_hiber; - -static struct platform_device *devices[] __initdata = { - &vt8500_device_uart0, - &vt8500_device_lcdc, - &vt8500_device_ehci, - &vt8500_device_ge_rops, - &vt8500_device_pwm, - &vt8500_device_pwmbl, - &vt8500_device_rtc, -}; - -static void vt8500_power_off(void) -{ - local_irq_disable(); - writew(5, pmc_hiber); - asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); -} - -void __init bv07_init(void) -{ -#ifdef CONFIG_FB_VT8500 - void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4); - if (gpio_mux_reg) { - writel(readl(gpio_mux_reg) | 1, gpio_mux_reg); - iounmap(gpio_mux_reg); - } else { - printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n"); - } -#endif - pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2); - if (pmc_hiber) - pm_power_off = &vt8500_power_off; - else - printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); - - wmt_setup_restart(); - vt8500_set_resources(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - vt8500_gpio_init(); -} - -MACHINE_START(BV07, "Benign BV07 Mini Netbook") - .atag_offset = 0x100, - .restart = wmt_restart, - .reserve = vt8500_reserve_mem, - .map_io = vt8500_map_io, - .init_irq = vt8500_init_irq, - .timer = &vt8500_timer, - .init_machine = bv07_init, -MACHINE_END diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h new file mode 100644 index 000000000000..2b2419646e95 --- /dev/null +++ b/arch/arm/mach-vt8500/common.h @@ -0,0 +1,28 @@ +/* linux/arch/arm/mach-vt8500/dt_common.h + * + * Copyright (C) 2012 Tony Prisk + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_VT8500_DT_COMMON_H +#define __ARCH_ARM_MACH_VT8500_DT_COMMON_H + +#include + +void __init vt8500_timer_init(void); +int __init vt8500_irq_init(struct device_node *node, + struct device_node *parent); + +/* defined in drivers/clk/clk-vt8500.c */ +void __init vtwm_clk_init(void __iomem *pmc_base); + +#endif diff --git a/arch/arm/mach-vt8500/devices-vt8500.c b/arch/arm/mach-vt8500/devices-vt8500.c deleted file mode 100644 index 19519aeecf37..000000000000 --- a/arch/arm/mach-vt8500/devices-vt8500.c +++ /dev/null @@ -1,91 +0,0 @@ -/* linux/arch/arm/mach-vt8500/devices-vt8500.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - -#include -#include -#include -#include "devices.h" - -void __init vt8500_set_resources(void) -{ - struct resource tmp[3]; - - tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K); - tmp[1] = wmt_irq_res(IRQ_LCDC); - wmt_res_add(&vt8500_device_lcdc, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART0); - wmt_res_add(&vt8500_device_uart0, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART1); - wmt_res_add(&vt8500_device_uart1, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART2); - wmt_res_add(&vt8500_device_uart2, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART3); - wmt_res_add(&vt8500_device_uart3, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512); - tmp[1] = wmt_irq_res(IRQ_EHCI); - wmt_res_add(&vt8500_device_ehci, tmp, 2); - - tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256); - wmt_res_add(&vt8500_device_ge_rops, tmp, 1); - - tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44); - wmt_res_add(&vt8500_device_pwm, tmp, 1); - - tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c); - tmp[1] = wmt_irq_res(IRQ_RTC); - tmp[2] = wmt_irq_res(IRQ_RTCSM); - wmt_res_add(&vt8500_device_rtc, tmp, 3); -} - -static void __init vt8500_set_externs(void) -{ - /* Non-resource-aware stuff */ - wmt_ic_base = VT8500_IC_BASE; - wmt_gpio_base = VT8500_GPIO_BASE; - wmt_pmc_base = VT8500_PMC_BASE; - wmt_i8042_base = VT8500_PS2_BASE; - - wmt_nr_irqs = VT8500_NR_IRQS; - wmt_timer_irq = IRQ_PMCOS0; - wmt_gpio_ext_irq[0] = IRQ_EXT0; - wmt_gpio_ext_irq[1] = IRQ_EXT1; - wmt_gpio_ext_irq[2] = IRQ_EXT2; - wmt_gpio_ext_irq[3] = IRQ_EXT3; - wmt_gpio_ext_irq[4] = IRQ_EXT4; - wmt_gpio_ext_irq[5] = IRQ_EXT5; - wmt_gpio_ext_irq[6] = IRQ_EXT6; - wmt_gpio_ext_irq[7] = IRQ_EXT7; - wmt_i8042_kbd_irq = IRQ_PS2KBD; - wmt_i8042_aux_irq = IRQ_PS2MOUSE; -} - -void __init vt8500_map_io(void) -{ - iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc)); - - /* Should be done before interrupts and timers are initialized */ - vt8500_set_externs(); -} diff --git a/arch/arm/mach-vt8500/devices-wm8505.c b/arch/arm/mach-vt8500/devices-wm8505.c deleted file mode 100644 index db4594e029f4..000000000000 --- a/arch/arm/mach-vt8500/devices-wm8505.c +++ /dev/null @@ -1,99 +0,0 @@ -/* linux/arch/arm/mach-vt8500/devices-wm8505.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include - -#include -#include -#include -#include "devices.h" - -void __init wm8505_set_resources(void) -{ - struct resource tmp[3]; - - tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512); - wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1); - - tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART0); - wmt_res_add(&vt8500_device_uart0, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART1); - wmt_res_add(&vt8500_device_uart1, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART2); - wmt_res_add(&vt8500_device_uart2, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART3); - wmt_res_add(&vt8500_device_uart3, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART4); - wmt_res_add(&vt8500_device_uart4, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040); - tmp[1] = wmt_irq_res(IRQ_UART5); - wmt_res_add(&vt8500_device_uart5, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512); - tmp[1] = wmt_irq_res(IRQ_EHCI); - wmt_res_add(&vt8500_device_ehci, tmp, 2); - - tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256); - wmt_res_add(&vt8500_device_ge_rops, tmp, 1); - - tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44); - wmt_res_add(&vt8500_device_pwm, tmp, 1); - - tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c); - tmp[1] = wmt_irq_res(IRQ_RTC); - tmp[2] = wmt_irq_res(IRQ_RTCSM); - wmt_res_add(&vt8500_device_rtc, tmp, 3); -} - -static void __init wm8505_set_externs(void) -{ - /* Non-resource-aware stuff */ - wmt_ic_base = WM8505_IC_BASE; - wmt_sic_base = WM8505_SIC_BASE; - wmt_gpio_base = WM8505_GPIO_BASE; - wmt_pmc_base = WM8505_PMC_BASE; - wmt_i8042_base = WM8505_PS2_BASE; - - wmt_nr_irqs = WM8505_NR_IRQS; - wmt_timer_irq = IRQ_PMCOS0; - wmt_gpio_ext_irq[0] = IRQ_EXT0; - wmt_gpio_ext_irq[1] = IRQ_EXT1; - wmt_gpio_ext_irq[2] = IRQ_EXT2; - wmt_gpio_ext_irq[3] = IRQ_EXT3; - wmt_gpio_ext_irq[4] = IRQ_EXT4; - wmt_gpio_ext_irq[5] = IRQ_EXT5; - wmt_gpio_ext_irq[6] = IRQ_EXT6; - wmt_gpio_ext_irq[7] = IRQ_EXT7; - wmt_i8042_kbd_irq = IRQ_PS2KBD; - wmt_i8042_aux_irq = IRQ_PS2MOUSE; -} - -void __init wm8505_map_io(void) -{ - iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc)); - - /* Should be done before interrupts and timers are initialized */ - wm8505_set_externs(); -} diff --git a/arch/arm/mach-vt8500/devices.c b/arch/arm/mach-vt8500/devices.c deleted file mode 100644 index 1fcdc36b358d..000000000000 --- a/arch/arm/mach-vt8500/devices.c +++ /dev/null @@ -1,270 +0,0 @@ -/* linux/arch/arm/mach-vt8500/devices.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include "devices.h" - -/* These can't use resources currently */ -unsigned long wmt_ic_base __initdata; -unsigned long wmt_sic_base __initdata; -unsigned long wmt_gpio_base __initdata; -unsigned long wmt_pmc_base __initdata; -unsigned long wmt_i8042_base __initdata; - -int wmt_nr_irqs __initdata; -int wmt_timer_irq __initdata; -int wmt_gpio_ext_irq[8] __initdata; - -/* Should remain accessible after init. - * i8042 driver desperately calls for attention... - */ -int wmt_i8042_kbd_irq; -int wmt_i8042_aux_irq; - -static u64 fb_dma_mask = DMA_BIT_MASK(32); - -struct platform_device vt8500_device_lcdc = { - .name = "vt8500-lcd", - .id = 0, - .dev = { - .dma_mask = &fb_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device vt8500_device_wm8505_fb = { - .name = "wm8505-fb", - .id = 0, -}; - -/* Smallest to largest */ -static struct vt8500fb_platform_data panels[] = { -#ifdef CONFIG_WMT_PANEL_800X480 -{ - .xres_virtual = 800, - .yres_virtual = 480 * 2, - .mode = { - .name = "800x480", - .xres = 800, - .yres = 480, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 0, - .vsync_len = 1, - .vmode = FB_VMODE_NONINTERLACED, - }, -}, -#endif -#ifdef CONFIG_WMT_PANEL_800X600 -{ - .xres_virtual = 800, - .yres_virtual = 600 * 2, - .mode = { - .name = "800x600", - .xres = 800, - .yres = 600, - .left_margin = 88, - .right_margin = 40, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 0, - .vsync_len = 1, - .vmode = FB_VMODE_NONINTERLACED, - }, -}, -#endif -#ifdef CONFIG_WMT_PANEL_1024X576 -{ - .xres_virtual = 1024, - .yres_virtual = 576 * 2, - .mode = { - .name = "1024x576", - .xres = 1024, - .yres = 576, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .vmode = FB_VMODE_NONINTERLACED, - }, -}, -#endif -#ifdef CONFIG_WMT_PANEL_1024X600 -{ - .xres_virtual = 1024, - .yres_virtual = 600 * 2, - .mode = { - .name = "1024x600", - .xres = 1024, - .yres = 600, - .left_margin = 66, - .right_margin = 2, - .upper_margin = 19, - .lower_margin = 1, - .hsync_len = 23, - .vsync_len = 8, - .vmode = FB_VMODE_NONINTERLACED, - }, -}, -#endif -}; - -static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1; - -static int __init panel_setup(char *str) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(panels); i++) { - if (strcmp(panels[i].mode.name, str) == 0) { - current_panel_idx = i; - break; - } - } - return 0; -} - -early_param("panel", panel_setup); - -static inline void preallocate_fb(struct vt8500fb_platform_data *p, - unsigned long align) { - p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >> - (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 : - (8 / p->bpp) + 1)); - p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len, - align); - p->video_mem_virt = phys_to_virt(p->video_mem_phys); -} - -struct platform_device vt8500_device_uart0 = { - .name = "vt8500_serial", - .id = 0, -}; - -struct platform_device vt8500_device_uart1 = { - .name = "vt8500_serial", - .id = 1, -}; - -struct platform_device vt8500_device_uart2 = { - .name = "vt8500_serial", - .id = 2, -}; - -struct platform_device vt8500_device_uart3 = { - .name = "vt8500_serial", - .id = 3, -}; - -struct platform_device vt8500_device_uart4 = { - .name = "vt8500_serial", - .id = 4, -}; - -struct platform_device vt8500_device_uart5 = { - .name = "vt8500_serial", - .id = 5, -}; - -static u64 ehci_dma_mask = DMA_BIT_MASK(32); - -struct platform_device vt8500_device_ehci = { - .name = "vt8500-ehci", - .id = 0, - .dev = { - .dma_mask = &ehci_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device vt8500_device_ge_rops = { - .name = "wmt_ge_rops", - .id = -1, -}; - -struct platform_device vt8500_device_pwm = { - .name = "vt8500-pwm", - .id = 0, -}; - -static struct platform_pwm_backlight_data vt8500_pwmbl_data = { - .pwm_id = 0, - .max_brightness = 128, - .dft_brightness = 70, - .pwm_period_ns = 250000, /* revisit when clocks are implemented */ -}; - -struct platform_device vt8500_device_pwmbl = { - .name = "pwm-backlight", - .id = 0, - .dev = { - .platform_data = &vt8500_pwmbl_data, - }, -}; - -struct platform_device vt8500_device_rtc = { - .name = "vt8500-rtc", - .id = 0, -}; - -struct map_desc wmt_io_desc[] __initdata = { - /* SoC MMIO registers */ - [0] = { - .virtual = 0xf8000000, - .pfn = __phys_to_pfn(0xd8000000), - .length = 0x00390000, /* max of all chip variants */ - .type = MT_DEVICE - }, - /* PCI I/O space, numbers tied to those in */ - [1] = { - .virtual = 0xf0000000, - .pfn = __phys_to_pfn(0xc0000000), - .length = SZ_64K, - .type = MT_DEVICE - }, -}; - -void __init vt8500_reserve_mem(void) -{ -#ifdef CONFIG_FB_VT8500 - panels[current_panel_idx].bpp = 16; /* Always use RGB565 */ - preallocate_fb(&panels[current_panel_idx], SZ_4M); - vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx]; -#endif -} - -void __init wm8505_reserve_mem(void) -{ -#if defined CONFIG_FB_WM8505 - panels[current_panel_idx].bpp = 32; /* Always use RGB888 */ - preallocate_fb(&panels[current_panel_idx], 32); - vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx]; -#endif -} diff --git a/arch/arm/mach-vt8500/devices.h b/arch/arm/mach-vt8500/devices.h deleted file mode 100644 index 188d4e17f35c..000000000000 --- a/arch/arm/mach-vt8500/devices.h +++ /dev/null @@ -1,88 +0,0 @@ -/* linux/arch/arm/mach-vt8500/devices.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H -#define __ARCH_ARM_MACH_VT8500_DEVICES_H - -#include -#include - -void __init vt8500_init_irq(void); -void __init wm8505_init_irq(void); -void __init vt8500_map_io(void); -void __init wm8505_map_io(void); -void __init vt8500_reserve_mem(void); -void __init wm8505_reserve_mem(void); -void __init vt8500_gpio_init(void); -void __init vt8500_set_resources(void); -void __init wm8505_set_resources(void); - -extern unsigned long wmt_ic_base __initdata; -extern unsigned long wmt_sic_base __initdata; -extern unsigned long wmt_gpio_base __initdata; -extern unsigned long wmt_pmc_base __initdata; - -extern int wmt_nr_irqs __initdata; -extern int wmt_timer_irq __initdata; -extern int wmt_gpio_ext_irq[8] __initdata; - -extern struct map_desc wmt_io_desc[2] __initdata; - -static inline struct resource wmt_mmio_res(u32 start, u32 size) -{ - struct resource tmp = { - .flags = IORESOURCE_MEM, - .start = start, - .end = start + size - 1, - }; - - return tmp; -} - -static inline struct resource wmt_irq_res(int irq) -{ - struct resource tmp = { - .flags = IORESOURCE_IRQ, - .start = irq, - .end = irq, - }; - - return tmp; -} - -static inline void wmt_res_add(struct platform_device *pdev, - const struct resource *res, unsigned int num) -{ - if (unlikely(platform_device_add_resources(pdev, res, num))) - pr_err("Failed to assign resources\n"); -} - -extern struct sys_timer vt8500_timer; - -extern struct platform_device vt8500_device_uart0; -extern struct platform_device vt8500_device_uart1; -extern struct platform_device vt8500_device_uart2; -extern struct platform_device vt8500_device_uart3; -extern struct platform_device vt8500_device_uart4; -extern struct platform_device vt8500_device_uart5; - -extern struct platform_device vt8500_device_lcdc; -extern struct platform_device vt8500_device_wm8505_fb; -extern struct platform_device vt8500_device_ehci; -extern struct platform_device vt8500_device_ge_rops; -extern struct platform_device vt8500_device_pwm; -extern struct platform_device vt8500_device_pwmbl; -extern struct platform_device vt8500_device_rtc; -#endif diff --git a/arch/arm/mach-vt8500/gpio.c b/arch/arm/mach-vt8500/gpio.c deleted file mode 100644 index 2bcc0ec783df..000000000000 --- a/arch/arm/mach-vt8500/gpio.c +++ /dev/null @@ -1,240 +0,0 @@ -/* linux/arch/arm/mach-vt8500/gpio.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include - -#include "devices.h" - -#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip) - -#define ENABLE_REGS 0x0 -#define DIRECTION_REGS 0x20 -#define OUTVALUE_REGS 0x40 -#define INVALUE_REGS 0x60 - -#define EXT_REGOFF 0x1c - -static void __iomem *regbase; - -struct vt8500_gpio_chip { - struct gpio_chip chip; - unsigned int shift; - unsigned int regoff; -}; - -static int gpio_to_irq_map[8]; - -static int vt8500_muxed_gpio_request(struct gpio_chip *chip, - unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff); - - val |= (1 << vt8500_chip->shift << offset); - writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff); - - return 0; -} - -static void vt8500_muxed_gpio_free(struct gpio_chip *chip, - unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff); - - val &= ~(1 << vt8500_chip->shift << offset); - writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff); -} - -static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff); - - val &= ~(1 << vt8500_chip->shift << offset); - writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff); - - return 0; -} - -static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff); - - val |= (1 << vt8500_chip->shift << offset); - writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff); - - if (value) { - val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff); - val |= (1 << vt8500_chip->shift << offset); - writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff); - } - return 0; -} - -static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip, - unsigned offset) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - - return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff) - >> vt8500_chip->shift >> offset) & 1; -} - -static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip); - unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff); - - if (value) - val |= (1 << vt8500_chip->shift << offset); - else - val &= ~(1 << vt8500_chip->shift << offset); - - writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff); -} - -#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \ -{ \ - .chip = { \ - .label = __name, \ - .request = vt8500_muxed_gpio_request, \ - .free = vt8500_muxed_gpio_free, \ - .direction_input = vt8500_muxed_gpio_direction_input, \ - .direction_output = vt8500_muxed_gpio_direction_output, \ - .get = vt8500_muxed_gpio_get_value, \ - .set = vt8500_muxed_gpio_set_value, \ - .can_sleep = 0, \ - .base = __base, \ - .ngpio = __num, \ - }, \ - .shift = __shift, \ - .regoff = __off, \ -} - -static struct vt8500_gpio_chip vt8500_muxed_gpios[] = { - VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4), - VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4), - VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4), - VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4), - VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4), - VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2), - - VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11), - VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7), - VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2), - VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2), - - VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20), - VT8500_GPIO_BANK("see", 20, 0x8, 72, 4), - VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7), - - VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19), - - VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11), - - VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23), -}; - -static int vt8500_gpio_direction_input(struct gpio_chip *chip, - unsigned offset) -{ - unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF); - - val &= ~(1 << offset); - writel(val, regbase + DIRECTION_REGS + EXT_REGOFF); - return 0; -} - -static int vt8500_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF); - - val |= (1 << offset); - writel(val, regbase + DIRECTION_REGS + EXT_REGOFF); - - if (value) { - val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF); - val |= (1 << offset); - writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF); - } - return 0; -} - -static int vt8500_gpio_get_value(struct gpio_chip *chip, - unsigned offset) -{ - return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1; -} - -static void vt8500_gpio_set_value(struct gpio_chip *chip, - unsigned offset, int value) -{ - unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF); - - if (value) - val |= (1 << offset); - else - val &= ~(1 << offset); - - writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF); -} - -static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - if (offset > 7) - return -EINVAL; - - return gpio_to_irq_map[offset]; -} - -static struct gpio_chip vt8500_external_gpios = { - .label = "extgpio", - .direction_input = vt8500_gpio_direction_input, - .direction_output = vt8500_gpio_direction_output, - .get = vt8500_gpio_get_value, - .set = vt8500_gpio_set_value, - .to_irq = vt8500_gpio_to_irq, - .can_sleep = 0, - .base = 0, - .ngpio = 8, -}; - -void __init vt8500_gpio_init(void) -{ - int i; - - for (i = 0; i < 8; i++) - gpio_to_irq_map[i] = wmt_gpio_ext_irq[i]; - - regbase = ioremap(wmt_gpio_base, SZ_64K); - if (!regbase) { - printk(KERN_ERR "Failed to map MMIO registers for GPIO\n"); - return; - } - - gpiochip_add(&vt8500_external_gpios); - - for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++) - gpiochip_add(&vt8500_muxed_gpios[i].chip); -} diff --git a/arch/arm/mach-vt8500/include/mach/restart.h b/arch/arm/mach-vt8500/include/mach/restart.h index 89f9b787d2a0..738979518acb 100644 --- a/arch/arm/mach-vt8500/include/mach/restart.h +++ b/arch/arm/mach-vt8500/include/mach/restart.h @@ -13,5 +13,5 @@ * */ -void wmt_setup_restart(void); -void wmt_restart(char mode, const char *cmd); +void vt8500_setup_restart(void); +void vt8500_restart(char mode, const char *cmd); diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h b/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h deleted file mode 100644 index ecfee9124711..000000000000 --- a/arch/arm/mach-vt8500/include/mach/vt8500_irqs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* VT8500 Interrupt Sources */ - -#define IRQ_JPEGENC 0 /* JPEG Encoder */ -#define IRQ_JPEGDEC 1 /* JPEG Decoder */ - /* Reserved */ -#define IRQ_PATA 3 /* PATA Controller */ - /* Reserved */ -#define IRQ_DMA 5 /* DMA Controller */ -#define IRQ_EXT0 6 /* External Interrupt 0 */ -#define IRQ_EXT1 7 /* External Interrupt 1 */ -#define IRQ_GE 8 /* Graphic Engine */ -#define IRQ_GOV 9 /* Graphic Overlay Engine */ -#define IRQ_ETHER 10 /* Ethernet MAC */ -#define IRQ_MPEGTS 11 /* Transport Stream Interface */ -#define IRQ_LCDC 12 /* LCD Controller */ -#define IRQ_EXT2 13 /* External Interrupt 2 */ -#define IRQ_EXT3 14 /* External Interrupt 3 */ -#define IRQ_EXT4 15 /* External Interrupt 4 */ -#define IRQ_CIPHER 16 /* Cipher */ -#define IRQ_VPP 17 /* Video Post-Processor */ -#define IRQ_I2C1 18 /* I2C 1 */ -#define IRQ_I2C0 19 /* I2C 0 */ -#define IRQ_SDMMC 20 /* SD/MMC Controller */ -#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */ -#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */ - /* Reserved */ -#define IRQ_SPI0 24 /* SPI 0 */ -#define IRQ_SPI1 25 /* SPI 1 */ -#define IRQ_SPI2 26 /* SPI 2 */ -#define IRQ_LCDDF 27 /* LCD Data Formatter */ -#define IRQ_NAND 28 /* NAND Flash Controller */ -#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */ -#define IRQ_MS 30 /* MemoryStick Controller */ -#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */ -#define IRQ_UART0 32 /* UART 0 */ -#define IRQ_UART1 33 /* UART 1 */ -#define IRQ_I2S 34 /* I2S */ -#define IRQ_PCM 35 /* PCM */ -#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */ -#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */ -#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */ -#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */ -#define IRQ_VPU 40 /* Video Processing Unit */ -#define IRQ_VID 41 /* Video Digital Input Interface */ -#define IRQ_AC97 42 /* AC97 Interface */ -#define IRQ_EHCI 43 /* USB */ -#define IRQ_NOR 44 /* NOR Flash Controller */ -#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */ -#define IRQ_PS2KBD 46 /* PS/2 Keyboard */ -#define IRQ_UART2 47 /* UART 2 */ -#define IRQ_RTC 48 /* RTC Interrupt */ -#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */ -#define IRQ_UART3 50 /* UART 3 */ -#define IRQ_ADC 51 /* ADC */ -#define IRQ_EXT5 52 /* External Interrupt 5 */ -#define IRQ_EXT6 53 /* External Interrupt 6 */ -#define IRQ_EXT7 54 /* External Interrupt 7 */ -#define IRQ_CIR 55 /* CIR */ -#define IRQ_DMA0 56 /* DMA Channel 0 */ -#define IRQ_DMA1 57 /* DMA Channel 1 */ -#define IRQ_DMA2 58 /* DMA Channel 2 */ -#define IRQ_DMA3 59 /* DMA Channel 3 */ -#define IRQ_DMA4 60 /* DMA Channel 4 */ -#define IRQ_DMA5 61 /* DMA Channel 5 */ -#define IRQ_DMA6 62 /* DMA Channel 6 */ -#define IRQ_DMA7 63 /* DMA Channel 7 */ - -#define VT8500_NR_IRQS 64 diff --git a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h b/arch/arm/mach-vt8500/include/mach/vt8500_regs.h deleted file mode 100644 index 29c63ecb2383..000000000000 --- a/arch/arm/mach-vt8500/include/mach/vt8500_regs.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/vt8500_regs.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_VT8500_REGS_H -#define __ASM_ARM_ARCH_VT8500_REGS_H - -/* VT8500 Registers Map */ - -#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */ -#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */ - -#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory - Controller */ -#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */ -#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory - Controller */ -#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */ -#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */ -#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */ -# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */ -# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */ -#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */ -#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */ -#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */ -#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */ -#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */ -#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */ -#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */ -#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */ -#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */ -#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */ -#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */ -#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */ -#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */ -#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */ -#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */ -#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */ -#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */ -#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */ -#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/ -#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */ -#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/ -#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */ -#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */ -#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */ -#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */ -#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */ -#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */ -#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */ -#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */ -#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */ -#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */ -#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */ -#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */ -#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */ -#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */ -#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */ - -#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */ -#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \ - - VT8500_REGS_START_PHYS + 1) - -#endif diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h b/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h deleted file mode 100644 index 6128627ac753..000000000000 --- a/arch/arm/mach-vt8500/include/mach/wm8505_irqs.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* WM8505 Interrupt Sources */ - -#define IRQ_UHCI 0 /* UHC FS (UHCI?) */ -#define IRQ_EHCI 1 /* UHC HS */ -#define IRQ_UDCDMA 2 /* UDC DMA */ - /* Reserved */ -#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */ -#define IRQ_UDC 5 /* UDC */ -#define IRQ_EXT0 6 /* External Interrupt 0 */ -#define IRQ_EXT1 7 /* External Interrupt 1 */ -#define IRQ_KEYPAD 8 /* Keypad */ -#define IRQ_DMA 9 /* DMA Controller */ -#define IRQ_ETHER 10 /* Ethernet MAC */ - /* Reserved */ - /* Reserved */ -#define IRQ_EXT2 13 /* External Interrupt 2 */ -#define IRQ_EXT3 14 /* External Interrupt 3 */ -#define IRQ_EXT4 15 /* External Interrupt 4 */ -#define IRQ_APB 16 /* APB Bridge */ -#define IRQ_DMA0 17 /* DMA Channel 0 */ -#define IRQ_I2C1 18 /* I2C 1 */ -#define IRQ_I2C0 19 /* I2C 0 */ -#define IRQ_SDMMC 20 /* SD/MMC Controller */ -#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */ -#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */ -#define IRQ_PS2KBD 23 /* PS/2 Keyboard */ -#define IRQ_SPI0 24 /* SPI 0 */ -#define IRQ_SPI1 25 /* SPI 1 */ -#define IRQ_SPI2 26 /* SPI 2 */ -#define IRQ_DMA1 27 /* DMA Channel 1 */ -#define IRQ_NAND 28 /* NAND Flash Controller */ -#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */ -#define IRQ_UART5 30 /* UART 5 */ -#define IRQ_UART4 31 /* UART 4 */ -#define IRQ_UART0 32 /* UART 0 */ -#define IRQ_UART1 33 /* UART 1 */ -#define IRQ_DMA2 34 /* DMA Channel 2 */ -#define IRQ_I2S 35 /* I2S */ -#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */ -#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */ -#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */ -#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */ -#define IRQ_DMA3 40 /* DMA Channel 3 */ -#define IRQ_DMA4 41 /* DMA Channel 4 */ -#define IRQ_AC97 42 /* AC97 Interface */ - /* Reserved */ -#define IRQ_NOR 44 /* NOR Flash Controller */ -#define IRQ_DMA5 45 /* DMA Channel 5 */ -#define IRQ_DMA6 46 /* DMA Channel 6 */ -#define IRQ_UART2 47 /* UART 2 */ -#define IRQ_RTC 48 /* RTC Interrupt */ -#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */ -#define IRQ_UART3 50 /* UART 3 */ -#define IRQ_DMA7 51 /* DMA Channel 7 */ -#define IRQ_EXT5 52 /* External Interrupt 5 */ -#define IRQ_EXT6 53 /* External Interrupt 6 */ -#define IRQ_EXT7 54 /* External Interrupt 7 */ -#define IRQ_CIR 55 /* CIR */ -#define IRQ_SIC0 56 /* SIC IRQ0 */ -#define IRQ_SIC1 57 /* SIC IRQ1 */ -#define IRQ_SIC2 58 /* SIC IRQ2 */ -#define IRQ_SIC3 59 /* SIC IRQ3 */ -#define IRQ_SIC4 60 /* SIC IRQ4 */ -#define IRQ_SIC5 61 /* SIC IRQ5 */ -#define IRQ_SIC6 62 /* SIC IRQ6 */ -#define IRQ_SIC7 63 /* SIC IRQ7 */ - /* Reserved */ -#define IRQ_JPEGDEC 65 /* JPEG Decoder */ -#define IRQ_SAE 66 /* SAE (?) */ - /* Reserved */ -#define IRQ_VPU 79 /* Video Processing Unit */ -#define IRQ_VPP 80 /* Video Post-Processor */ -#define IRQ_VID 81 /* Video Digital Input Interface */ -#define IRQ_SPU 82 /* SPU (?) */ -#define IRQ_PIP 83 /* PIP Error */ -#define IRQ_GE 84 /* Graphic Engine */ -#define IRQ_GOV 85 /* Graphic Overlay Engine */ -#define IRQ_DVO 86 /* Digital Video Output */ - /* Reserved */ -#define IRQ_DMA8 92 /* DMA Channel 8 */ -#define IRQ_DMA9 93 /* DMA Channel 9 */ -#define IRQ_DMA10 94 /* DMA Channel 10 */ -#define IRQ_DMA11 95 /* DMA Channel 11 */ -#define IRQ_DMA12 96 /* DMA Channel 12 */ -#define IRQ_DMA13 97 /* DMA Channel 13 */ -#define IRQ_DMA14 98 /* DMA Channel 14 */ -#define IRQ_DMA15 99 /* DMA Channel 15 */ - /* Reserved */ -#define IRQ_GOVW 111 /* GOVW (?) */ -#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */ -#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */ -#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */ -#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */ - -#define WM8505_NR_IRQS 116 diff --git a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h b/arch/arm/mach-vt8500/include/mach/wm8505_regs.h deleted file mode 100644 index df1550941efb..000000000000 --- a/arch/arm/mach-vt8500/include/mach/wm8505_regs.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * arch/arm/mach-vt8500/include/mach/wm8505_regs.h - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_WM8505_REGS_H -#define __ASM_ARM_ARCH_WM8505_REGS_H - -/* WM8505 Registers Map */ - -#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */ -#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */ - -#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory - Controller */ -#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */ -#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */ -#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory - Controller */ -#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */ -#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */ -#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */ -# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */ -# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */ -#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */ -#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */ -#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */ -#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */ -#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */ -#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */ -#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */ -#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */ -#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */ -#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */ -#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */ -#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */ -#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */ -#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */ -#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/ -#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */ -#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/ -#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */ -#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */ -#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */ -#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */ -#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */ -#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */ -#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */ -#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */ -#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */ -#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */ -#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */ -#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */ -#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */ -#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */ -#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */ -#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */ -#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */ - -#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */ -#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \ - - WM8505_REGS_START_PHYS + 1) - -#endif diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 642de0408f25..f8f9ab9bc56e 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -1,6 +1,7 @@ /* * arch/arm/mach-vt8500/irq.c * + * Copyright (C) 2012 Tony Prisk * Copyright (C) 2010 Alexey Charkov * * This program is free software; you can redistribute it and/or modify @@ -18,81 +19,102 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* + * This file is copied and modified from the original irq.c provided by + * Alexey Charkov. Minor changes have been made for Device Tree Support. + */ + +#include #include #include +#include #include +#include + +#include +#include +#include #include -#include "devices.h" -#define VT8500_IC_DCTR 0x40 /* Destination control - register, 64*u8 */ -#define VT8500_INT_ENABLE (1 << 3) -#define VT8500_TRIGGER_HIGH (0 << 4) -#define VT8500_TRIGGER_RISING (1 << 4) -#define VT8500_TRIGGER_FALLING (2 << 4) +#define VT8500_ICPC_IRQ 0x20 +#define VT8500_ICPC_FIQ 0x24 +#define VT8500_ICDC 0x40 /* Destination Control 64*u32 */ +#define VT8500_ICIS 0x80 /* Interrupt status, 16*u32 */ + +/* ICPC */ +#define ICPC_MASK 0x3F +#define ICPC_ROTATE BIT(6) + +/* IC_DCTR */ +#define ICDC_IRQ 0x00 +#define ICDC_FIQ 0x01 +#define ICDC_DSS0 0x02 +#define ICDC_DSS1 0x03 +#define ICDC_DSS2 0x04 +#define ICDC_DSS3 0x05 +#define ICDC_DSS4 0x06 +#define ICDC_DSS5 0x07 + +#define VT8500_INT_DISABLE 0 +#define VT8500_INT_ENABLE BIT(3) + +#define VT8500_TRIGGER_HIGH 0 +#define VT8500_TRIGGER_RISING BIT(5) +#define VT8500_TRIGGER_FALLING BIT(6) #define VT8500_EDGE ( VT8500_TRIGGER_RISING \ | VT8500_TRIGGER_FALLING) -#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */ -static void __iomem *ic_regbase; -static void __iomem *sic_regbase; +static int irq_cnt; + +struct vt8500_irq_priv { + void __iomem *base; +}; static void vt8500_irq_mask(struct irq_data *d) { - void __iomem *base = ic_regbase; - unsigned irq = d->irq; + struct vt8500_irq_priv *priv = + (struct vt8500_irq_priv *)(d->domain->host_data); + void __iomem *base = priv->base; u8 edge; - if (irq >= 64) { - base = sic_regbase; - irq -= 64; - } - edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE; + edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE; if (edge) { - void __iomem *stat_reg = base + VT8500_IC_STATUS - + (irq < 32 ? 0 : 4); + void __iomem *stat_reg = base + VT8500_ICIS + + (d->hwirq < 32 ? 0 : 4); unsigned status = readl(stat_reg); - status |= (1 << (irq & 0x1f)); + status |= (1 << (d->hwirq & 0x1f)); writel(status, stat_reg); } else { - u8 dctr = readb(base + VT8500_IC_DCTR + irq); + u8 dctr = readb(base + VT8500_ICDC + d->hwirq); dctr &= ~VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_IC_DCTR + irq); + writeb(dctr, base + VT8500_ICDC + d->hwirq); } } static void vt8500_irq_unmask(struct irq_data *d) { - void __iomem *base = ic_regbase; - unsigned irq = d->irq; + struct vt8500_irq_priv *priv = + (struct vt8500_irq_priv *)(d->domain->host_data); + void __iomem *base = priv->base; u8 dctr; - if (irq >= 64) { - base = sic_regbase; - irq -= 64; - } - dctr = readb(base + VT8500_IC_DCTR + irq); + dctr = readb(base + VT8500_ICDC + d->hwirq); dctr |= VT8500_INT_ENABLE; - writeb(dctr, base + VT8500_IC_DCTR + irq); + writeb(dctr, base + VT8500_ICDC + d->hwirq); } static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { - void __iomem *base = ic_regbase; - unsigned irq = d->irq; - unsigned orig_irq = irq; + struct vt8500_irq_priv *priv = + (struct vt8500_irq_priv *)(d->domain->host_data); + void __iomem *base = priv->base; u8 dctr; - if (irq >= 64) { - base = sic_regbase; - irq -= 64; - } - - dctr = readb(base + VT8500_IC_DCTR + irq); + dctr = readb(base + VT8500_ICDC + d->hwirq); dctr &= ~VT8500_EDGE; switch (flow_type) { @@ -100,18 +122,18 @@ static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) return -EINVAL; case IRQF_TRIGGER_HIGH: dctr |= VT8500_TRIGGER_HIGH; - __irq_set_handler_locked(orig_irq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); break; case IRQF_TRIGGER_FALLING: dctr |= VT8500_TRIGGER_FALLING; - __irq_set_handler_locked(orig_irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); break; case IRQF_TRIGGER_RISING: dctr |= VT8500_TRIGGER_RISING; - __irq_set_handler_locked(orig_irq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); break; } - writeb(dctr, base + VT8500_IC_DCTR + irq); + writeb(dctr, base + VT8500_ICDC + d->hwirq); return 0; } @@ -124,57 +146,76 @@ static struct irq_chip vt8500_irq_chip = { .irq_set_type = vt8500_irq_set_type, }; -void __init vt8500_init_irq(void) +static void __init vt8500_init_irq_hw(void __iomem *base) { unsigned int i; - ic_regbase = ioremap(wmt_ic_base, SZ_64K); + /* Enable rotating priority for IRQ */ + writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ); + writel(0x00, base + VT8500_ICPC_FIQ); - if (ic_regbase) { - /* Enable rotating priority for IRQ */ - writel((1 << 6), ic_regbase + 0x20); - writel(0, ic_regbase + 0x24); + for (i = 0; i < 64; i++) { + /* Disable all interrupts and route them to IRQ */ + writeb(VT8500_INT_DISABLE | ICDC_IRQ, + base + VT8500_ICDC + i); + } +} - for (i = 0; i < wmt_nr_irqs; i++) { - /* Disable all interrupts and route them to IRQ */ - writeb(0x00, ic_regbase + VT8500_IC_DCTR + i); +static int vt8500_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &vt8500_irq_chip, handle_level_irq); + set_irq_flags(virq, IRQF_VALID); - irq_set_chip_and_handler(i, &vt8500_irq_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } - } else { - printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n"); - } + return 0; } -void __init wm8505_init_irq(void) +static struct irq_domain_ops vt8500_irq_domain_ops = { + .map = vt8500_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +int __init vt8500_irq_init(struct device_node *node, struct device_node *parent) { - unsigned int i; + struct irq_domain *vt8500_irq_domain; + struct vt8500_irq_priv *priv; + int irq, i; + struct device_node *np = node; + + priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL); + priv->base = of_iomap(np, 0); + + vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0, + &vt8500_irq_domain_ops, priv); + if (!vt8500_irq_domain) + pr_err("%s: Unable to add wmt irq domain!\n", __func__); + + irq_set_default_host(vt8500_irq_domain); + + vt8500_init_irq_hw(priv->base); - ic_regbase = ioremap(wmt_ic_base, SZ_64K); - sic_regbase = ioremap(wmt_sic_base, SZ_64K); - - if (ic_regbase && sic_regbase) { - /* Enable rotating priority for IRQ */ - writel((1 << 6), ic_regbase + 0x20); - writel(0, ic_regbase + 0x24); - writel((1 << 6), sic_regbase + 0x20); - writel(0, sic_regbase + 0x24); - - for (i = 0; i < wmt_nr_irqs; i++) { - /* Disable all interrupts and route them to IRQ */ - if (i < 64) - writeb(0x00, ic_regbase + VT8500_IC_DCTR + i); - else - writeb(0x00, sic_regbase + VT8500_IC_DCTR - + i - 64); - - irq_set_chip_and_handler(i, &vt8500_irq_chip, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); + pr_info("Added IRQ Controller @ %x [virq_base = %d]\n", + (u32)(priv->base), irq_cnt); + + /* check if this is a slaved controller */ + if (of_irq_count(np) != 0) { + /* check that we have the correct number of interrupts */ + if (of_irq_count(np) != 8) { + pr_err("%s: Incorrect IRQ map for slave controller\n", + __func__); + return -EINVAL; } - } else { - printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n"); + + for (i = 0; i < 8; i++) { + irq = irq_of_parse_and_map(np, i); + enable_irq(irq); + } + + pr_info("vt8500-irq: Enabled slave->parent interrupts\n"); } + + irq_cnt += 64; + + return 0; } + diff --git a/arch/arm/mach-vt8500/restart.c b/arch/arm/mach-vt8500/restart.c deleted file mode 100644 index 497e89a5e130..000000000000 --- a/arch/arm/mach-vt8500/restart.c +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-vt8500/restart.c - * - * Copyright (C) 2012 Tony Prisk - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include -#include -#include - -#define LEGACY_PMC_BASE 0xD8130000 -#define WMT_PRIZM_PMSR_REG 0x60 - -static void __iomem *pmc_base; - -void wmt_setup_restart(void) -{ - struct device_node *np; - - /* - * Check if Power Mgmt Controller node is present in device tree. If no - * device tree node, use the legacy PMSR value (valid for all current - * SoCs). - */ - np = of_find_compatible_node(NULL, NULL, "wmt,prizm-pmc"); - if (np) { - pmc_base = of_iomap(np, 0); - - if (!pmc_base) - pr_err("%s:of_iomap(pmc) failed\n", __func__); - - of_node_put(np); - } else { - pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); - if (!pmc_base) { - pr_err("%s:ioremap(rstc) failed\n", __func__); - return; - } - } -} - -void wmt_restart(char mode, const char *cmd) -{ - if (pmc_base) - writel(1, pmc_base + WMT_PRIZM_PMSR_REG); -} diff --git a/arch/arm/mach-vt8500/timer.c b/arch/arm/mach-vt8500/timer.c index d5376c592ab6..050e1833f2d0 100644 --- a/arch/arm/mach-vt8500/timer.c +++ b/arch/arm/mach-vt8500/timer.c @@ -1,6 +1,7 @@ /* - * arch/arm/mach-vt8500/timer.c + * arch/arm/mach-vt8500/timer_dt.c * + * Copyright (C) 2012 Tony Prisk * Copyright (C) 2010 Alexey Charkov * * This program is free software; you can redistribute it and/or modify @@ -18,18 +19,25 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* + * This file is copied and modified from the original timer.c provided by + * Alexey Charkov. Minor changes have been made for Device Tree Support. + */ + #include #include #include #include #include #include - #include -#include "devices.h" +#include +#include +#include #define VT8500_TIMER_OFFSET 0x0100 +#define VT8500_TIMER_HZ 3000000 #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0010 #define TIMER_STATUS_VAL 0x0014 @@ -39,7 +47,6 @@ #define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */ #define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */ #define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */ -#define VT8500_TIMER_HZ 3000000 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) @@ -55,7 +62,7 @@ static cycle_t vt8500_timer_read(struct clocksource *cs) return readl(regbase + TIMER_COUNT_VAL); } -struct clocksource clocksource = { +static struct clocksource clocksource = { .name = "vt8500_timer", .rating = 200, .read = vt8500_timer_read, @@ -98,7 +105,7 @@ static void vt8500_timer_set_mode(enum clock_event_mode mode, } } -struct clock_event_device clockevent = { +static struct clock_event_device clockevent = { .name = "vt8500_timer", .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 200, @@ -115,26 +122,51 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -struct irqaction irq = { +static struct irqaction irq = { .name = "vt8500_timer", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = vt8500_timer_interrupt, .dev_id = &clockevent, }; -static void __init vt8500_timer_init(void) +static struct of_device_id vt8500_timer_ids[] = { + { .compatible = "via,vt8500-timer" }, + { } +}; + +void __init vt8500_timer_init(void) { - regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28); - if (!regbase) - printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n"); + struct device_node *np; + int timer_irq; + + np = of_find_matching_node(NULL, vt8500_timer_ids); + if (!np) { + pr_err("%s: Timer description missing from Device Tree\n", + __func__); + return; + } + regbase = of_iomap(np, 0); + if (!regbase) { + pr_err("%s: Missing iobase description in Device Tree\n", + __func__); + of_node_put(np); + return; + } + timer_irq = irq_of_parse_and_map(np, 0); + if (!timer_irq) { + pr_err("%s: Missing irq description in Device Tree\n", + __func__); + of_node_put(np); + return; + } writel(1, regbase + TIMER_CTRL_VAL); writel(0xf, regbase + TIMER_STATUS_VAL); writel(~0, regbase + TIMER_MATCH_VAL); if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ)) - printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n", - clocksource.name); + pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n", + __func__, clocksource.name); clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4); @@ -144,12 +176,9 @@ static void __init vt8500_timer_init(void) clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent); clockevent.cpumask = cpumask_of(0); - if (setup_irq(wmt_timer_irq, &irq)) - printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n", - clockevent.name); + if (setup_irq(timer_irq, &irq)) + pr_err("%s: setup_irq failed for %s\n", __func__, + clockevent.name); clockevents_register_device(&clockevent); } -struct sys_timer vt8500_timer = { - .init = vt8500_timer_init -}; diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c new file mode 100644 index 000000000000..449499354449 --- /dev/null +++ b/arch/arm/mach-vt8500/vt8500.c @@ -0,0 +1,196 @@ +/* + * arch/arm/mach-vt8500/vt8500.c + * + * Copyright (C) 2012 Tony Prisk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "common.h" + +#define LEGACY_GPIO_BASE 0xD8110000 +#define LEGACY_PMC_BASE 0xD8130000 + +/* Registers in GPIO Controller */ +#define VT8500_GPIO_MUX_REG 0x200 + +/* Registers in Power Management Controller */ +#define VT8500_HCR_REG 0x12 +#define VT8500_PMSR_REG 0x60 + +static void __iomem *pmc_base; + +void vt8500_restart(char mode, const char *cmd) +{ + if (pmc_base) + writel(1, pmc_base + VT8500_PMSR_REG); +} + +static struct map_desc vt8500_io_desc[] __initdata = { + /* SoC MMIO registers */ + [0] = { + .virtual = 0xf8000000, + .pfn = __phys_to_pfn(0xd8000000), + .length = 0x00390000, /* max of all chip variants */ + .type = MT_DEVICE + }, +}; + +void __init vt8500_map_io(void) +{ + iotable_init(vt8500_io_desc, ARRAY_SIZE(vt8500_io_desc)); +} + +static void vt8500_power_off(void) +{ + local_irq_disable(); + writew(5, pmc_base + VT8500_HCR_REG); + asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); +} + +void __init vt8500_init(void) +{ + struct device_node *np, *fb; + void __iomem *gpio_base; + +#ifdef CONFIG_FB_VT8500 + fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb"); + if (fb) { + np = of_find_compatible_node(NULL, NULL, "via,vt8500-gpio"); + if (np) { + gpio_base = of_iomap(np, 0); + + if (!gpio_base) + pr_err("%s: of_iomap(gpio_mux) failed\n", + __func__); + + of_node_put(np); + } else { + gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000); + if (!gpio_base) + pr_err("%s: ioremap(legacy_gpio_mux) failed\n", + __func__); + } + if (gpio_base) { + writel(readl(gpio_base + VT8500_GPIO_MUX_REG) | 1, + gpio_base + VT8500_GPIO_MUX_REG); + iounmap(gpio_base); + } else + pr_err("%s: Could not remap GPIO mux\n", __func__); + + of_node_put(fb); + } +#endif + +#ifdef CONFIG_FB_WM8505 + fb = of_find_compatible_node(NULL, NULL, "wm,wm8505-fb"); + if (fb) { + np = of_find_compatible_node(NULL, NULL, "wm,wm8505-gpio"); + if (!np) + np = of_find_compatible_node(NULL, NULL, + "wm,wm8650-gpio"); + if (np) { + gpio_base = of_iomap(np, 0); + + if (!gpio_base) + pr_err("%s: of_iomap(gpio_mux) failed\n", + __func__); + + of_node_put(np); + } else { + gpio_base = ioremap(LEGACY_GPIO_BASE, 0x1000); + if (!gpio_base) + pr_err("%s: ioremap(legacy_gpio_mux) failed\n", + __func__); + } + if (gpio_base) { + writel(readl(gpio_base + VT8500_GPIO_MUX_REG) | + 0x80000000, gpio_base + VT8500_GPIO_MUX_REG); + iounmap(gpio_base); + } else + pr_err("%s: Could not remap GPIO mux\n", __func__); + + of_node_put(fb); + } +#endif + + np = of_find_compatible_node(NULL, NULL, "via,vt8500-pmc"); + if (np) { + pmc_base = of_iomap(np, 0); + + if (!pmc_base) + pr_err("%s:of_iomap(pmc) failed\n", __func__); + + of_node_put(np); + } else { + pmc_base = ioremap(LEGACY_PMC_BASE, 0x1000); + if (!pmc_base) + pr_err("%s:ioremap(power_off) failed\n", __func__); + } + if (pmc_base) + pm_power_off = &vt8500_power_off; + else + pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); + + vtwm_clk_init(pmc_base); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const struct of_device_id vt8500_irq_match[] __initconst = { + { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, }, + { /* sentinel */ }, +}; + +static void __init vt8500_init_irq(void) +{ + of_irq_init(vt8500_irq_match); +}; + +static struct sys_timer vt8500_timer = { + .init = vt8500_timer_init, +}; + +static const char * const vt8500_dt_compat[] = { + "via,vt8500", + "wm,wm8650", + "wm,wm8505", +}; + +DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)") + .dt_compat = vt8500_dt_compat, + .map_io = vt8500_map_io, + .init_irq = vt8500_init_irq, + .timer = &vt8500_timer, + .init_machine = vt8500_init, + .restart = vt8500_restart, +MACHINE_END + diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c deleted file mode 100644 index db19886caf7c..000000000000 --- a/arch/arm/mach-vt8500/wm8505_7in.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-vt8500/wm8505_7in.c - * - * Copyright (C) 2010 Alexey Charkov - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include - -#include -#include -#include - -#include "devices.h" - -static void __iomem *pmc_hiber; - -static struct platform_device *devices[] __initdata = { - &vt8500_device_uart0, - &vt8500_device_ehci, - &vt8500_device_wm8505_fb, - &vt8500_device_ge_rops, - &vt8500_device_pwm, - &vt8500_device_pwmbl, - &vt8500_device_rtc, -}; - -static void vt8500_power_off(void) -{ - local_irq_disable(); - writew(5, pmc_hiber); - asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); -} - -void __init wm8505_7in_init(void) -{ -#ifdef CONFIG_FB_WM8505 - void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4); - if (gpio_mux_reg) { - writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg); - iounmap(gpio_mux_reg); - } else { - printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n"); - } -#endif - pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2); - if (pmc_hiber) - pm_power_off = &vt8500_power_off; - else - printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n"); - wmt_setup_restart(); - wm8505_set_resources(); - platform_add_devices(devices, ARRAY_SIZE(devices)); - vt8500_gpio_init(); -} - -MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook") - .atag_offset = 0x100, - .restart = wmt_restart, - .reserve = wm8505_reserve_mem, - .map_io = wm8505_map_io, - .init_irq = wm8505_init_irq, - .timer = &vt8500_timer, - .init_machine = wm8505_7in_init, -MACHINE_END -- cgit v1.2.3-58-ga151 From 37586e0b9cadd1072196c3cca8ea8559b91b1605 Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Mon, 3 Sep 2012 11:03:47 +0800 Subject: ARM: dt: mmp-dma: add binding file Signed-off-by: Zhangfei Gao Acked-by: Arnd Bergmann Signed-off-by: Haojian Zhuang --- Documentation/devicetree/bindings/dma/mmp-dma.txt | 74 +++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/mmp-dma.txt diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt new file mode 100644 index 000000000000..a4fa4efa1d83 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -0,0 +1,74 @@ +* MARVELL MMP DMA controller + +Marvell Peripheral DMA Controller +Used platfroms: pxa688, pxa910, pxa3xx, etc + +Required properties: +- compatible: Should be "marvell,pdma-1.0" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for pdma device +- #dma-channels: Number of DMA channels supported by the controller. + +"marvell,pdma-1.0" +Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. + +Examples: + +/* + * Each channel has specific irq + * ICU parse out irq channel from ICU register, + * while DMA controller may not able to distinguish the irq channel + * Using this method, interrupt-parent is required as demuxer + * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, + * 18~21 is ADMA irq + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + interrupt-parent = <&intcmux32>; + #dma-channels = <16>; + }; + +/* + * One irq for all channels + * Dmaengine driver (DMA controller) distinguish irq channel via + * parsing internal register + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-channels = <16>; + }; + + +Marvell Two Channel DMA Controller used specifically for audio +Used platfroms: pxa688, pxa910 + +Required properties: +- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for dma device + +"marvell,adma-1.0" used on pxa688 +"marvell,pxa910-squ" used on pxa910 + +Examples: + +/* each channel has specific irq */ +adma0: dma-controller@d42a0800 { + compatible = "marvell,adma-1.0"; + reg = <0xd42a0800 0x100>; + interrupts = <18 19>; + interrupt-parent = <&intcmux32>; + }; + +/* One irq for all channels */ +squ: dma-controller@d42a0800 { + compatible = "marvell,pxa910-squ"; + reg = <0xd42a0800 0x100>; + interrupts = <46>; + }; -- cgit v1.2.3-58-ga151 From 07c7e12ca7e32e942d2c42dd67329c5fc3886b07 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Tue, 25 Sep 2012 10:11:41 +0200 Subject: ARM: LPC32xx: LED fix in PHY3250 DTS file This patch adjusts the PHY3250 board file to the actual LED configuration (active high, default-state and trigger configuration). Signed-off-by: Roland Stigge --- arch/arm/boot/dts/phy3250.dts | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index a7ad85e4b8f9..90fdbd77f274 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -189,16 +189,14 @@ leds { compatible = "gpio-leds"; - led0 { - gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */ - linux,default-trigger = "heartbeat"; + led0 { /* red */ + gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */ default-state = "off"; }; - led1 { - gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ - linux,default-trigger = "timer"; - default-state = "off"; + led1 { /* green */ + gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */ + linux,default-trigger = "heartbeat"; }; }; }; -- cgit v1.2.3-58-ga151 From 075954b1a935899865fd3f7b5cddef42b8b6d57e Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Wed, 26 Sep 2012 05:47:19 +1200 Subject: arm: vt8500: Fixup for missing gpio.h mach/include/gpio.h was removed as part of the multiplatform-3.7 update. This patch removes the include from arch-vt8500/vt8500.c Signed-off-by: Tony Prisk Signed-off-by: Olof Johansson --- arch/arm/mach-vt8500/vt8500.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 449499354449..587ea950d08b 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -32,7 +32,6 @@ #include #include -#include #include "common.h" -- cgit v1.2.3-58-ga151