From bc9b934b2fbbd51008a1b52c0cd1b457e6440736 Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Tue, 25 Jul 2017 14:00:22 +0200 Subject: memory: atmel-ebi: Fix smc timing return value evaluation Setting optional EBI/SMC properties through device tree always fails due to wrong evaluation of the return value of atmel_ebi_xslate_smc_timings(). If you put some of those properties in your dts file, but not 'atmel,smc-tdf-ns' the local variable 'required' in atmel_ebi_xslate_smc_timings() stays on 'false' after the first 'if' block. This leads to setting 'ret' to -EINVAL in the first run of the following 'for' loop which is then the return value of this function. However if you set 'atmel,smc-tdf-ns' in the dts file and everything in atmel_ebi_xslate_smc_timings() works well, it returns the content of 'required' which is 'true' then. So the function atmel_ebi_xslate_smc_timings() always returns non-zero which lets its call in atmel_ebi_xslate_smc_config() always fail and thus returning -EINVAL, so the EBI configuration for this node fails. Judging from the following code evaluating the local 'required' variable in atmel_ebi_xslate_smc_config() and the call of caps->xlate_config in atmel_ebi_dev_setup() it's probably right to only let the call fail if a negative error code is returned. Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- drivers/memory/atmel-ebi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 99e644cda4d1..1cf34d24d4e0 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -263,7 +263,7 @@ static int atmel_ebi_xslate_smc_config(struct atmel_ebi_dev *ebid, } ret = atmel_ebi_xslate_smc_timings(ebid, np, &conf->smcconf); - if (ret) + if (ret < 0) return -EINVAL; if ((ret > 0 && !required) || (!ret && required)) { -- cgit v1.2.3-58-ga151 From 1f6b53901f5bffbbb0464c732e83bb2a3a784ff7 Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Tue, 25 Jul 2017 14:00:23 +0200 Subject: memory: atmel-ebi: Allow t_DF timings of zero ns As reported in [1] and in [2] it's not possible to set the device tree property 'atmel,smc-tdf-ns' to zero, although the SoC allows a setting of 0ns for the t_DF time. Allow this setting by doing the same thing as in the atmel nand controller driver by setting ncycles to ATMEL_SMC_MODE_TDF_MIN if zero is set in the dts. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490966.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-July/520652.html Suggested-by: Boris Brezillon Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Signed-off-by: Alexandre Belloni --- drivers/memory/atmel-ebi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index 1cf34d24d4e0..f8a01aea422e 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -120,12 +120,14 @@ static int atmel_ebi_xslate_smc_timings(struct atmel_ebi_dev *ebid, if (!ret) { required = true; ncycles = DIV_ROUND_UP(val, clk_period_ns); - if (ncycles > ATMEL_SMC_MODE_TDF_MAX || - ncycles < ATMEL_SMC_MODE_TDF_MIN) { + if (ncycles > ATMEL_SMC_MODE_TDF_MAX) { ret = -EINVAL; goto out; } + if (ncycles < ATMEL_SMC_MODE_TDF_MIN) + ncycles = ATMEL_SMC_MODE_TDF_MIN; + smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles); } -- cgit v1.2.3-58-ga151 From 3fb3b3c4b68e33bb4acf42361b6a0db96115de35 Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Tue, 25 Jul 2017 14:00:24 +0200 Subject: memory: atmel-ebi: Fix smc cycle xlate converter The converter function for translating ns timings in register values was initialized with a wrong function pointer. This resulted in wrong register values also for the setup and pulse registers when configuring the EBI interface trough dts. Includes a small fix in a comment of the smc driver, which was probably just a copy'n'paste mistake. Signed-off-by: Alexander Dahl Acked-by: Boris Brezillon Acked-by: Lee Jones Signed-off-by: Alexandre Belloni --- drivers/memory/atmel-ebi.c | 2 +- drivers/mfd/atmel-smc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c index f8a01aea422e..ebf69ff48ae2 100644 --- a/drivers/memory/atmel-ebi.c +++ b/drivers/memory/atmel-ebi.c @@ -72,7 +72,7 @@ struct atmel_smc_timing_xlate { { .name = nm, .converter = atmel_smc_cs_conf_set_pulse, .shift = pos} #define ATMEL_SMC_CYCLE_XLATE(nm, pos) \ - { .name = nm, .converter = atmel_smc_cs_conf_set_setup, .shift = pos} + { .name = nm, .converter = atmel_smc_cs_conf_set_cycle, .shift = pos} static void at91sam9_ebi_get_config(struct atmel_ebi_dev *ebid, struct atmel_ebi_dev_config *conf) diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index 954cf0f66a31..20cc0ea470fa 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -206,7 +206,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse); * parameter * * This function encodes the @ncycles value as described in the datasheet - * (section "SMC Pulse Register"), and then stores the result in the + * (section "SMC Cycle Register"), and then stores the result in the * @conf->setup field at @shift position. * * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in -- cgit v1.2.3-58-ga151 From 4459398b6d9e3055ced5de9820364b3bdd79ac25 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Mon, 31 Jul 2017 10:01:36 +0530 Subject: soc: ti: knav: Add a NULL pointer check for kdev in knav_pool_create knav_pool_create is an exported function. In the event of a call before knav_queue_probe, we encounter a NULL pointer dereference in the following line. Hence return -EPROBE_DEFER to the caller till the kdev pointer is non-NULL. Signed-off-by: Keerthy Acked-by: Santosh Shilimkar Signed-off-by: Arnd Bergmann --- drivers/soc/ti/knav_qmss_queue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/soc/ti/knav_qmss_queue.c b/drivers/soc/ti/knav_qmss_queue.c index 279e7c5551dd..39225de9d7f1 100644 --- a/drivers/soc/ti/knav_qmss_queue.c +++ b/drivers/soc/ti/knav_qmss_queue.c @@ -745,6 +745,9 @@ void *knav_pool_create(const char *name, bool slot_found; int ret; + if (!kdev) + return ERR_PTR(-EPROBE_DEFER); + if (!kdev->dev) return ERR_PTR(-ENODEV); -- cgit v1.2.3-58-ga151 From dbeb0c8e84805b78f3979b53a4a12751403e4520 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 23 Aug 2017 16:46:15 +0200 Subject: ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platforms My previous patch fixed a link error for all at91 platforms when CONFIG_ARM_CPU_SUSPEND was not set, however this caused another problem on a configuration that enabled CONFIG_ARCH_AT91 but none of the individual SoCs, and that also enabled CPU_ARM720 as the only CPU: warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE) arch/arm/kernel/sleep.o: In function `cpu_resume': (.text+0xf0): undefined reference to `cpu_arm720_suspend_size' arch/arm/kernel/suspend.o: In function `__cpu_suspend_save': suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend' This improves the hack some more by only selecting ARM_CPU_SUSPEND for the part that requires it, and changing pm.c to drop the contents of unused init functions so we no longer refer to cpu_resume on at91 platforms that don't need it. Fixes: cc7a938f5f30 ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND") Acked-by: Alexandre Belloni Signed-off-by: Arnd Bergmann --- arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/pm.c | 12 ++++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index d735e5fc4772..195da38cb9a2 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,7 +1,7 @@ menuconfig ARCH_AT91 bool "Atmel SoCs" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M - select ARM_CPU_SUSPEND if PM + select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7 select COMMON_CLK_AT91 select GPIOLIB select PINCTRL diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 667fddac3856..5036f996e694 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -608,6 +608,9 @@ static void __init at91_pm_init(void (*pm_idle)(void)) void __init at91rm9200_pm_init(void) { + if (!IS_ENABLED(CONFIG_SOC_AT91RM9200)) + return; + at91_dt_ramc(); /* @@ -620,18 +623,27 @@ void __init at91rm9200_pm_init(void) void __init at91sam9_pm_init(void) { + if (!IS_ENABLED(CONFIG_SOC_AT91SAM9)) + return; + at91_dt_ramc(); at91_pm_init(at91sam9_idle); } void __init sama5_pm_init(void) { + if (!IS_ENABLED(CONFIG_SOC_SAMA5)) + return; + at91_dt_ramc(); at91_pm_init(NULL); } void __init sama5d2_pm_init(void) { + if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) + return; + at91_pm_backup_init(); sama5_pm_init(); } -- cgit v1.2.3-58-ga151 From 93a4c8355e0e448d83f31801b4c72f66e4360975 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 23 Aug 2017 18:24:50 +0200 Subject: ARM: dts: exynos: add needs-hpd for Odroid-XU3/4 CEC support was added for Exynos5 in 4.13, but for the Odroids we need to set 'needs-hpd' as well since CEC is disabled when there is no HDMI hotplug signal, just as for the exynos4 Odroid-U3. This is due to the level-shifter that is disabled when there is no HPD, thus blocking the CEC signal as well. Same close-but-no-cigar board design as the Odroid-U3. Tested with my Odroid XU4. Signed-off-by: Hans Verkuil Signed-off-by: Krzysztof Kozlowski Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index f92f95741207..a183b56283f8 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -266,6 +266,7 @@ &hdmicec { status = "okay"; + needs-hpd; }; &hsi2c_4 { -- cgit v1.2.3-58-ga151