From 45b611c896faf29e235d9de6c7a8ceb3393c2b9c Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 15 Sep 2017 04:00:02 +0200 Subject: rtc: rv3029: fix vendor string The vendor string for Microcrystal is microcrystal. Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/trivial-devices.txt | 2 +- drivers/rtc/rtc-rv3029c2.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index af284fbd4d23..aae37352c574 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -72,7 +72,6 @@ isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface -mc,rv3029c2 Real Time Clock Module with I2C-Bus mcube,mc3230 mCube 3-axis 8-bit digital accelerometer memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) @@ -141,6 +140,7 @@ microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection +microcrystal,rv3029 Real Time Clock Module with I2C-Bus miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index aa09771de04f..cfe3aece51d1 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -876,6 +876,8 @@ static const struct i2c_device_id rv3029_id[] = { MODULE_DEVICE_TABLE(i2c, rv3029_id); static const struct of_device_id rv3029_of_match[] = { + { .compatible = "microcrystal,rv3029" }, + /* Backward compatibility only, do not use compatibles below: */ { .compatible = "rv3029" }, { .compatible = "rv3029c2" }, { .compatible = "mc,rv3029c2" }, -- cgit v1.2.3-58-ga151 From 74717b28cb32e1ad3c1042cafd76b264c8c0f68d Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Thu, 28 Sep 2017 13:53:27 +0200 Subject: rtc: set the alarm to the next expiring timer If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Alexandre Belloni --- drivers/rtc/interface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 8cec9a02c0b8..9eb32ead63db 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -779,7 +779,7 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer) } timerqueue_add(&rtc->timerqueue, &timer->node); - if (!next) { + if (!next || ktime_before(timer->node.expires, next->expires)) { struct rtc_wkalrm alarm; int err; alarm.time = rtc_ktime_to_tm(timer->node.expires); -- cgit v1.2.3-58-ga151 From 584ce30c72954e5ec67aaf317d7cbffe6c2c97fa Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 29 Aug 2017 21:52:56 +0200 Subject: rtc: ds1307: improve weekday handling The current code for checking and fixing the weekday in ds1307_probe faces some issues: - This check is applied to all chips even if its applicable (AFAIK) to mcp794xx only - The check uses MCP794XX constants for registers and bits even though it's executed also on other chips (ok, this could be fixed easily) - It relies on tm_wday being properly populated when core calls set_time and set_alarm. This is not guaranteed at all. First two issue we could solve by moving the check to the mcp794xx-specific initialization (where also VBATEN flag is set). The proposed alternative is in the set_alarm path for mcp794xx only and calculates the alarm weekday based on the current weekday in the RTC timekeeping regs and the difference between alarm date and current date. So we are fine with any weekday even if it doesn't match the date. Still there are cases where this could fail, e.g.: - rtc date/time + weekday have power-on-reset default values - alarm is set to actual date/time + x - set_time is called (may change diff between rtc weekday and actual weekday) But similar issues we have with the current code too: - rtc date/time + weekday have power-on-reset default values - alarm is set to rtc date/time + x - set_time is called before the alarm triggers Using random rtc date/time with relative alarms simply can interfere with set_time. I'm not totally convinced of either option yet. Signed-off-by: Heiner Kallweit Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1307.c | 52 ++++++++++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index e7d9215c9201..1cca20fdd025 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -787,8 +787,6 @@ static int rx8130_alarm_irq_enable(struct device *dev, unsigned int enabled) * Alarm support for mcp794xx devices. */ -#define MCP794XX_REG_WEEKDAY 0x3 -#define MCP794XX_REG_WEEKDAY_WDAY_MASK 0x7 #define MCP794XX_REG_CONTROL 0x07 # define MCP794XX_BIT_ALM0_EN 0x10 # define MCP794XX_BIT_ALM1_EN 0x20 @@ -877,15 +875,38 @@ static int mcp794xx_read_alarm(struct device *dev, struct rtc_wkalrm *t) return 0; } +/* + * We may have a random RTC weekday, therefore calculate alarm weekday based + * on current weekday we read from the RTC timekeeping regs + */ +static int mcp794xx_alm_weekday(struct device *dev, struct rtc_time *tm_alarm) +{ + struct rtc_time tm_now; + int days_now, days_alarm, ret; + + ret = ds1307_get_time(dev, &tm_now); + if (ret) + return ret; + + days_now = div_s64(rtc_tm_to_time64(&tm_now), 24 * 60 * 60); + days_alarm = div_s64(rtc_tm_to_time64(tm_alarm), 24 * 60 * 60); + + return (tm_now.tm_wday + days_alarm - days_now) % 7 + 1; +} + static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t) { struct ds1307 *ds1307 = dev_get_drvdata(dev); unsigned char regs[10]; - int ret; + int wday, ret; if (!test_bit(HAS_ALARM, &ds1307->flags)) return -EINVAL; + wday = mcp794xx_alm_weekday(dev, &t->time); + if (wday < 0) + return wday; + dev_dbg(dev, "%s, sec=%d min=%d hour=%d wday=%d mday=%d mon=%d " "enabled=%d pending=%d\n", __func__, t->time.tm_sec, t->time.tm_min, t->time.tm_hour, @@ -902,7 +923,7 @@ static int mcp794xx_set_alarm(struct device *dev, struct rtc_wkalrm *t) regs[3] = bin2bcd(t->time.tm_sec); regs[4] = bin2bcd(t->time.tm_min); regs[5] = bin2bcd(t->time.tm_hour); - regs[6] = bin2bcd(t->time.tm_wday + 1); + regs[6] = wday; regs[7] = bin2bcd(t->time.tm_mday); regs[8] = bin2bcd(t->time.tm_mon + 1); @@ -1354,14 +1375,12 @@ static int ds1307_probe(struct i2c_client *client, { struct ds1307 *ds1307; int err = -ENODEV; - int tmp, wday; + int tmp; const struct chip_desc *chip; bool want_irq; bool ds1307_can_wakeup_device = false; unsigned char regs[8]; struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev); - struct rtc_time tm; - unsigned long timestamp; u8 trickle_charger_setup = 0; ds1307 = devm_kzalloc(&client->dev, sizeof(struct ds1307), GFP_KERNEL); @@ -1641,25 +1660,6 @@ read_rtc: bin2bcd(tmp)); } - /* - * Some IPs have weekday reset value = 0x1 which might not correct - * hence compute the wday using the current date/month/year values - */ - ds1307_get_time(ds1307->dev, &tm); - wday = tm.tm_wday; - timestamp = rtc_tm_to_time64(&tm); - rtc_time64_to_tm(timestamp, &tm); - - /* - * Check if reset wday is different from the computed wday - * If different then set the wday which we computed using - * timestamp - */ - if (wday != tm.tm_wday) - regmap_update_bits(ds1307->regmap, MCP794XX_REG_WEEKDAY, - MCP794XX_REG_WEEKDAY_WDAY_MASK, - tm.tm_wday + 1); - if (want_irq || ds1307_can_wakeup_device) { device_set_wakeup_capable(ds1307->dev, true); set_bit(HAS_ALARM, &ds1307->flags); -- cgit v1.2.3-58-ga151 From 49de9828810cb4ccf85ac213d4fd15f1a30fb4f6 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Sun, 10 Sep 2017 21:39:57 +0200 Subject: rtc: jz4740: remove duplicate 'write' in message Trivial fix in error message with duplicate 'write' Signed-off-by: Mathieu Malaterre Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-jz4740.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c index 64989afffa3d..c9536fb0ba4a 100644 --- a/drivers/rtc/rtc-jz4740.c +++ b/drivers/rtc/rtc-jz4740.c @@ -368,7 +368,7 @@ static int jz4740_rtc_probe(struct platform_device *pdev) ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SCRATCHPAD, 0x12345678); ret = jz4740_rtc_reg_write(rtc, JZ_REG_RTC_SEC, 0); if (ret) { - dev_err(&pdev->dev, "Could not write write to RTC registers\n"); + dev_err(&pdev->dev, "Could not write to RTC registers\n"); return ret; } } -- cgit v1.2.3-58-ga151 From 695e38d8818dd858d7516c77bab96be266f56694 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Mon, 18 Sep 2017 21:10:13 +0200 Subject: rtc: jz4740: fix loading of rtc driver The current timeout for waiting for WRDY is not always sufficient. Always increase it to 10000 even on JZ4740. This is technically only required on JZ4780, where the current symptoms seen after a hard reboot are: jz4740-rtc 10003000.rtc: rtc core: registered 10003000.rtc as rtc0 jz4740-rtc 10003000.rtc: Could not write to RTC registers jz4740-rtc: probe of 10003000.rtc failed with error -5 Suggested-by: Alex Smith Cc: Zubair Lutfullah Kakakhel Signed-off-by: Mathieu Malaterre Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-jz4740.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c index c9536fb0ba4a..ff65a7d2b9c9 100644 --- a/drivers/rtc/rtc-jz4740.c +++ b/drivers/rtc/rtc-jz4740.c @@ -82,7 +82,7 @@ static inline uint32_t jz4740_rtc_reg_read(struct jz4740_rtc *rtc, size_t reg) static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc) { uint32_t ctrl; - int timeout = 1000; + int timeout = 10000; do { ctrl = jz4740_rtc_reg_read(rtc, JZ_REG_RTC_CTRL); @@ -94,7 +94,7 @@ static int jz4740_rtc_wait_write_ready(struct jz4740_rtc *rtc) static inline int jz4780_rtc_enable_write(struct jz4740_rtc *rtc) { uint32_t ctrl; - int ret, timeout = 1000; + int ret, timeout = 10000; ret = jz4740_rtc_wait_write_ready(rtc); if (ret != 0) -- cgit v1.2.3-58-ga151 From 97f5b0379c382d9c2b944baa02852338dee7d8aa Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 Sep 2017 00:45:30 +0300 Subject: rtc: rv3029: Clean up error handling in rv3029_eeprom_write() We don't need both "ret" and "err" when they do the same thing. All the functions called here return zero on success or negative error codes. It's more clear to return a literal zero at the end instead of "return ret;" Signed-off-by: Dan Carpenter Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rv3029c2.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c index cfe3aece51d1..3d6174eb32f6 100644 --- a/drivers/rtc/rtc-rv3029c2.c +++ b/drivers/rtc/rtc-rv3029c2.c @@ -282,13 +282,13 @@ static int rv3029_eeprom_read(struct device *dev, u8 reg, static int rv3029_eeprom_write(struct device *dev, u8 reg, u8 const buf[], size_t len) { - int ret, err; + int ret; size_t i; u8 tmp; - err = rv3029_eeprom_enter(dev); - if (err < 0) - return err; + ret = rv3029_eeprom_enter(dev); + if (ret < 0) + return ret; for (i = 0; i < len; i++, reg++) { ret = rv3029_read_regs(dev, reg, &tmp, 1); @@ -304,11 +304,11 @@ static int rv3029_eeprom_write(struct device *dev, u8 reg, break; } - err = rv3029_eeprom_exit(dev); - if (err < 0) - return err; + ret = rv3029_eeprom_exit(dev); + if (ret < 0) + return ret; - return ret; + return 0; } static int rv3029_eeprom_update_bits(struct device *dev, -- cgit v1.2.3-58-ga151 From eb508b36d549d96a7ddcf1fe0656cdd86b038fe5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:22:00 +0100 Subject: rtc: pl031: constify amba_ids The AMBA device IDs should be marked const. Make that so. Reviewed-by: Linus Walleij Signed-off-by: Russell King Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pl031.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index e1687e19c59f..0d87b90b1903 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -446,7 +446,7 @@ static struct pl031_vendor_data stv2_pl031 = { .irqflags = IRQF_SHARED | IRQF_COND_SUSPEND, }; -static struct amba_id pl031_ids[] = { +static const struct amba_id pl031_ids[] = { { .id = 0x00041031, .mask = 0x000fffff, -- cgit v1.2.3-58-ga151 From 273c868e85a56481ccb34822be2033dbe63248fb Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:22:05 +0100 Subject: rtc: pl031: use devm_* for allocating memory and mapping resource Use the devm_* APIs for allocating memory and mapping the memory in the probe function to relieve the driver from having to deal with this in the cleanup paths. Signed-off-by: Russell King Reviewed-by: Linus Walleij Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pl031.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 0d87b90b1903..777da06d53ee 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -310,8 +310,6 @@ static int pl031_remove(struct amba_device *adev) device_init_wakeup(&adev->dev, false); free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); - iounmap(ldata->base); - kfree(ldata); amba_release_regions(adev); return 0; @@ -329,18 +327,19 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) if (ret) goto err_req; - ldata = kzalloc(sizeof(struct pl031_local), GFP_KERNEL); + ldata = devm_kzalloc(&adev->dev, sizeof(struct pl031_local), + GFP_KERNEL); if (!ldata) { ret = -ENOMEM; goto out; } ldata->vendor = vendor; - ldata->base = ioremap(adev->res.start, resource_size(&adev->res)); - + ldata->base = devm_ioremap(&adev->dev, adev->res.start, + resource_size(&adev->res)); if (!ldata->base) { ret = -ENOMEM; - goto out_no_remap; + goto out; } amba_set_drvdata(adev, ldata); @@ -378,7 +377,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) THIS_MODULE); if (IS_ERR(ldata->rtc)) { ret = PTR_ERR(ldata->rtc); - goto out_no_rtc; + goto out; } if (request_irq(adev->irq[0], pl031_interrupt, @@ -391,10 +390,6 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) out_no_irq: rtc_device_unregister(ldata->rtc); -out_no_rtc: - iounmap(ldata->base); -out_no_remap: - kfree(ldata); out: amba_release_regions(adev); err_req: -- cgit v1.2.3-58-ga151 From b86f581f8cdbec3655d400ad952c2203a74edde1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:22:10 +0100 Subject: rtc: pl031: avoid exposing alarm if no interrupt If the RTC has no interrupt, there is little point in exposing the RTC alarm capabilities, as it can't be used as a wakeup source nor can it deliver an event to userspace. Signed-off-by: Russell King Reviewed-by: Linus Walleij Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pl031.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 777da06d53ee..64c77ec1b4ea 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -320,7 +320,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) int ret; struct pl031_local *ldata; struct pl031_vendor_data *vendor = id->data; - struct rtc_class_ops *ops = &vendor->ops; + struct rtc_class_ops *ops; unsigned long time, data; ret = amba_request_regions(adev, NULL); @@ -329,12 +329,14 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) ldata = devm_kzalloc(&adev->dev, sizeof(struct pl031_local), GFP_KERNEL); - if (!ldata) { + ops = devm_kmemdup(&adev->dev, &vendor->ops, sizeof(vendor->ops), + GFP_KERNEL); + if (!ldata || !ops) { ret = -ENOMEM; goto out; } - ldata->vendor = vendor; + ldata->vendor = vendor; ldata->base = devm_ioremap(&adev->dev, adev->res.start, resource_size(&adev->res)); if (!ldata->base) { @@ -372,6 +374,13 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) } } + if (!adev->irq[0]) { + /* When there's no interrupt, no point in exposing the alarm */ + ops->read_alarm = NULL; + ops->set_alarm = NULL; + ops->alarm_irq_enable = NULL; + } + device_init_wakeup(&adev->dev, true); ldata->rtc = rtc_device_register("pl031", &adev->dev, ops, THIS_MODULE); -- cgit v1.2.3-58-ga151 From 5b64a2965dfdfca8039e93303c64e2b15c19ff0c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:22:15 +0100 Subject: rtc: pl031: make interrupt optional On some platforms, the interrupt for the PL031 is optional. Avoid trying to claim the interrupt if it's not specified. Reviewed-by: Linus Walleij Signed-off-by: Russell King Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pl031.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 64c77ec1b4ea..82eb7da2c478 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -308,7 +308,8 @@ static int pl031_remove(struct amba_device *adev) dev_pm_clear_wake_irq(&adev->dev); device_init_wakeup(&adev->dev, false); - free_irq(adev->irq[0], ldata); + if (adev->irq[0]) + free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); amba_release_regions(adev); @@ -389,12 +390,13 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id) goto out; } - if (request_irq(adev->irq[0], pl031_interrupt, - vendor->irqflags, "rtc-pl031", ldata)) { - ret = -EIO; - goto out_no_irq; + if (adev->irq[0]) { + ret = request_irq(adev->irq[0], pl031_interrupt, + vendor->irqflags, "rtc-pl031", ldata); + if (ret) + goto out_no_irq; + dev_pm_set_wake_irq(&adev->dev, adev->irq[0]); } - dev_pm_set_wake_irq(&adev->dev, adev->irq[0]); return 0; out_no_irq: -- cgit v1.2.3-58-ga151 From 6a4e89161e4ae4aa57eb8d4a419e7fb2cc340a13 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:03:22 +0200 Subject: rtc: ds1305: switch to rtc_register_device This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1305.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index 72b22935eb62..c3232c818e65 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -708,10 +708,15 @@ static int ds1305_probe(struct spi_device *spi) dev_dbg(&spi->dev, "AM/PM\n"); /* register RTC ... from here on, ds1305->ctrl needs locking */ - ds1305->rtc = devm_rtc_device_register(&spi->dev, "ds1305", - &ds1305_ops, THIS_MODULE); + ds1305->rtc = devm_rtc_allocate_device(&spi->dev); if (IS_ERR(ds1305->rtc)) { - status = PTR_ERR(ds1305->rtc); + return PTR_ERR(ds1305->rtc); + } + + ds1305->rtc->ops = &ds1305_ops; + + status = rtc_register_device(ds1305->rtc); + if (status) { dev_dbg(&spi->dev, "register rtc --> %d\n", status); return status; } -- cgit v1.2.3-58-ga151 From 41e607f21b16ce648d629daa0349bfe4bf4cadaa Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:03:23 +0200 Subject: rtc: ds1305: use generic nvmem Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1305.c | 59 +++++++++++++++++------------------------------- 1 file changed, 21 insertions(+), 38 deletions(-) diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c index c3232c818e65..d8df2e9e14ad 100644 --- a/drivers/rtc/rtc-ds1305.c +++ b/drivers/rtc/rtc-ds1305.c @@ -514,56 +514,43 @@ static void msg_init(struct spi_message *m, struct spi_transfer *x, spi_message_add_tail(x, m); } -static ssize_t -ds1305_nvram_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) +static int ds1305_nvram_read(void *priv, unsigned int off, void *buf, + size_t count) { - struct spi_device *spi; + struct ds1305 *ds1305 = priv; + struct spi_device *spi = ds1305->spi; u8 addr; struct spi_message m; struct spi_transfer x[2]; - int status; - - spi = to_spi_device(kobj_to_dev(kobj)); addr = DS1305_NVRAM + off; msg_init(&m, x, &addr, count, NULL, buf); - status = spi_sync(spi, &m); - if (status < 0) - dev_err(&spi->dev, "nvram %s error %d\n", "read", status); - return (status < 0) ? status : count; + return spi_sync(spi, &m); } -static ssize_t -ds1305_nvram_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) +static int ds1305_nvram_write(void *priv, unsigned int off, void *buf, + size_t count) { - struct spi_device *spi; + struct ds1305 *ds1305 = priv; + struct spi_device *spi = ds1305->spi; u8 addr; struct spi_message m; struct spi_transfer x[2]; - int status; - - spi = to_spi_device(kobj_to_dev(kobj)); addr = (DS1305_WRITE | DS1305_NVRAM) + off; msg_init(&m, x, &addr, count, buf, NULL); - status = spi_sync(spi, &m); - if (status < 0) - dev_err(&spi->dev, "nvram %s error %d\n", "write", status); - return (status < 0) ? status : count; + return spi_sync(spi, &m); } -static struct bin_attribute nvram = { - .attr.name = "nvram", - .attr.mode = S_IRUGO | S_IWUSR, - .read = ds1305_nvram_read, - .write = ds1305_nvram_write, - .size = DS1305_NVRAM_LEN, +static struct nvmem_config ds1305_nvmem_cfg = { + .name = "ds1305_nvram", + .word_size = 1, + .stride = 1, + .size = DS1305_NVRAM_LEN, + .reg_read = ds1305_nvram_read, + .reg_write = ds1305_nvram_write, }; /*----------------------------------------------------------------------*/ @@ -715,6 +702,10 @@ static int ds1305_probe(struct spi_device *spi) ds1305->rtc->ops = &ds1305_ops; + ds1305_nvmem_cfg.priv = ds1305; + ds1305->rtc->nvmem_config = &ds1305_nvmem_cfg; + ds1305->rtc->nvram_old_abi = true; + status = rtc_register_device(ds1305->rtc); if (status) { dev_dbg(&spi->dev, "register rtc --> %d\n", status); @@ -739,12 +730,6 @@ static int ds1305_probe(struct spi_device *spi) } } - /* export NVRAM */ - status = sysfs_create_bin_file(&spi->dev.kobj, &nvram); - if (status < 0) { - dev_err(&spi->dev, "register nvram --> %d\n", status); - } - return 0; } @@ -752,8 +737,6 @@ static int ds1305_remove(struct spi_device *spi) { struct ds1305 *ds1305 = spi_get_drvdata(spi); - sysfs_remove_bin_file(&spi->dev.kobj, &nvram); - /* carefully shut down irq and workqueue, if present */ if (spi->irq) { set_bit(FLAG_EXITING, &ds1305->flags); -- cgit v1.2.3-58-ga151 From 5508c72528d22805e301ecdfd3abcd85af24b0ec Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:04:20 +0200 Subject: rtc: m48t86: switch to rtc_register_device This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m48t86.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c index 02af045305dd..22656a90cfc5 100644 --- a/drivers/rtc/rtc-m48t86.c +++ b/drivers/rtc/rtc-m48t86.c @@ -228,6 +228,7 @@ static int m48t86_rtc_probe(struct platform_device *pdev) struct m48t86_rtc_info *info; struct resource *res; unsigned char reg; + int err; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -254,11 +255,16 @@ static int m48t86_rtc_probe(struct platform_device *pdev) return -ENODEV; } - info->rtc = devm_rtc_device_register(&pdev->dev, "m48t86", - &m48t86_rtc_ops, THIS_MODULE); + info->rtc = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(info->rtc)) return PTR_ERR(info->rtc); + info->rtc->ops = &m48t86_rtc_ops; + + err = rtc_register_device(info->rtc); + if (err) + return err; + /* read battery status */ reg = m48t86_readb(&pdev->dev, M48T86_D); dev_info(&pdev->dev, "battery %s\n", -- cgit v1.2.3-58-ga151 From f8033aabb23bd8b2b51e2c32ee759f860ecdd1ee Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:04:21 +0200 Subject: rtc: m48t86: use generic nvmem Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m48t86.c | 48 +++++++++++++++++++++++------------------------- 1 file changed, 23 insertions(+), 25 deletions(-) diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c index 22656a90cfc5..d9aea9b6d9cd 100644 --- a/drivers/rtc/rtc-m48t86.c +++ b/drivers/rtc/rtc-m48t86.c @@ -163,35 +163,30 @@ static const struct rtc_class_ops m48t86_rtc_ops = { .proc = m48t86_rtc_proc, }; -static ssize_t m48t86_nvram_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) +static int m48t86_nvram_read(void *priv, unsigned int off, void *buf, + size_t count) { - struct device *dev = kobj_to_dev(kobj); + struct device *dev = priv; unsigned int i; for (i = 0; i < count; i++) - buf[i] = m48t86_readb(dev, M48T86_NVRAM(off + i)); + ((u8 *)buf)[i] = m48t86_readb(dev, M48T86_NVRAM(off + i)); - return count; + return 0; } -static ssize_t m48t86_nvram_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) +static int m48t86_nvram_write(void *priv, unsigned int off, void *buf, + size_t count) { - struct device *dev = kobj_to_dev(kobj); + struct device *dev = priv; unsigned int i; for (i = 0; i < count; i++) - m48t86_writeb(dev, buf[i], M48T86_NVRAM(off + i)); + m48t86_writeb(dev, ((u8 *)buf)[i], M48T86_NVRAM(off + i)); - return count; + return 0; } -static BIN_ATTR(nvram, 0644, m48t86_nvram_read, m48t86_nvram_write, - M48T86_NVRAM_LEN); - /* * The RTC is an optional feature at purchase time on some Technologic Systems * boards. Verify that it actually exists by checking if the last two bytes @@ -223,6 +218,15 @@ static bool m48t86_verify_chip(struct platform_device *pdev) return false; } +static struct nvmem_config m48t86_nvmem_cfg = { + .name = "m48t86_nvram", + .word_size = 1, + .stride = 1, + .size = M48T86_NVRAM_LEN, + .reg_read = m48t86_nvram_read, + .reg_write = m48t86_nvram_write, +}; + static int m48t86_rtc_probe(struct platform_device *pdev) { struct m48t86_rtc_info *info; @@ -261,6 +265,10 @@ static int m48t86_rtc_probe(struct platform_device *pdev) info->rtc->ops = &m48t86_rtc_ops; + m48t86_nvmem_cfg.priv = &pdev->dev; + info->rtc->nvmem_config = &m48t86_nvmem_cfg; + info->rtc->nvram_old_abi = true; + err = rtc_register_device(info->rtc); if (err) return err; @@ -270,15 +278,6 @@ static int m48t86_rtc_probe(struct platform_device *pdev) dev_info(&pdev->dev, "battery %s\n", (reg & M48T86_D_VRT) ? "ok" : "exhausted"); - if (device_create_bin_file(&pdev->dev, &bin_attr_nvram)) - dev_err(&pdev->dev, "failed to create nvram sysfs entry\n"); - - return 0; -} - -static int m48t86_rtc_remove(struct platform_device *pdev) -{ - device_remove_bin_file(&pdev->dev, &bin_attr_nvram); return 0; } @@ -287,7 +286,6 @@ static struct platform_driver m48t86_rtc_platform_driver = { .name = "rtc-m48t86", }, .probe = m48t86_rtc_probe, - .remove = m48t86_rtc_remove, }; module_platform_driver(m48t86_rtc_platform_driver); -- cgit v1.2.3-58-ga151 From 9360a6a81862d3acfeb44745d9db4f9861ba4159 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:04:46 +0200 Subject: rtc: abx80x: switch to rtc_register_device This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-abx80x.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c index fea9a60b06cf..442e62a3c9a9 100644 --- a/drivers/rtc/rtc-abx80x.c +++ b/drivers/rtc/rtc-abx80x.c @@ -614,12 +614,16 @@ static int abx80x_probe(struct i2c_client *client, if (err) return err; - rtc = devm_rtc_device_register(&client->dev, "abx8xx", - &abx80x_rtc_ops, THIS_MODULE); - + rtc = devm_rtc_allocate_device(&client->dev); if (IS_ERR(rtc)) return PTR_ERR(rtc); + rtc->ops = &abx80x_rtc_ops; + + err = rtc_register_device(rtc); + if (err) + return err; + i2c_set_clientdata(client, rtc); if (client->irq > 0) { -- cgit v1.2.3-58-ga151 From 9da32ba64d59d577297bf766a3f12753ebef5712 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:04:47 +0200 Subject: rtc: abx80x: solve race condition There is a race condition that can happen if abx80x_probe() fails after the rtc registration succeeded. Solve that by moving the registration at the end of the probe function. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-abx80x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c index 442e62a3c9a9..b033bc556f5d 100644 --- a/drivers/rtc/rtc-abx80x.c +++ b/drivers/rtc/rtc-abx80x.c @@ -620,10 +620,6 @@ static int abx80x_probe(struct i2c_client *client, rtc->ops = &abx80x_rtc_ops; - err = rtc_register_device(rtc); - if (err) - return err; - i2c_set_clientdata(client, rtc); if (client->irq > 0) { @@ -650,10 +646,14 @@ static int abx80x_probe(struct i2c_client *client, err = devm_add_action_or_reset(&client->dev, rtc_calib_remove_sysfs_group, &client->dev); - if (err) + if (err) { dev_err(&client->dev, "Failed to add sysfs cleanup action: %d\n", err); + return err; + } + + err = rtc_register_device(rtc); return err; } -- cgit v1.2.3-58-ga151 From 3032269b21fdbfc021b14d14a50bec39f9891b08 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:05:27 +0200 Subject: rtc: ds1511: switch to rtc_register_device This allows for future improvement of the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1511.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index 1b2dcb58c0ab..d44635178771 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -477,11 +477,16 @@ static int ds1511_rtc_probe(struct platform_device *pdev) spin_lock_init(&pdata->lock); platform_set_drvdata(pdev, pdata); - pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, - &ds1511_rtc_ops, THIS_MODULE); + pdata->rtc = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(pdata->rtc)) return PTR_ERR(pdata->rtc); + pdata->rtc->ops = &ds1511_rtc_ops; + + ret = rtc_register_device(pdata->rtc); + if (ret) + return ret; + /* * if the platform has an interrupt in mind for this device, * then by all means, set it -- cgit v1.2.3-58-ga151 From a283d27625ffe3dadf5daece25674eab89722b6a Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:05:28 +0200 Subject: rtc: ds1511: allow waking platform Disabling interrupts when removing the driver is bad practice as this will prevent some platform from waking up when using that RTC. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1511.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index d44635178771..eda45358d63a 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -511,16 +511,8 @@ static int ds1511_rtc_probe(struct platform_device *pdev) static int ds1511_rtc_remove(struct platform_device *pdev) { - struct rtc_plat_data *pdata = platform_get_drvdata(pdev); - sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); - if (pdata->irq > 0) { - /* - * disable the alarm interrupt - */ - rtc_write(rtc_read(RTC_CMD) & ~RTC_TIE, RTC_CMD); - rtc_read(RTC_CMD1); - } + return 0; } -- cgit v1.2.3-58-ga151 From 9d7ed21ff4af20628bad39689ff946d4649472d6 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:05:29 +0200 Subject: rtc: ds1511: use generic nvmem Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1511.c | 58 ++++++++++++++++++------------------------------ 1 file changed, 22 insertions(+), 36 deletions(-) diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c index eda45358d63a..1e95312a6f2e 100644 --- a/drivers/rtc/rtc-ds1511.c +++ b/drivers/rtc/rtc-ds1511.c @@ -398,42 +398,37 @@ static const struct rtc_class_ops ds1511_rtc_ops = { .alarm_irq_enable = ds1511_rtc_alarm_irq_enable, }; -static ssize_t -ds1511_nvram_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *ba, - char *buf, loff_t pos, size_t size) +static int ds1511_nvram_read(void *priv, unsigned int pos, void *buf, + size_t size) { - ssize_t count; + int i; rtc_write(pos, DS1511_RAMADDR_LSB); - for (count = 0; count < size; count++) - *buf++ = rtc_read(DS1511_RAMDATA); + for (i = 0; i < size; i++) + *(char *)buf++ = rtc_read(DS1511_RAMDATA); - return count; + return 0; } -static ssize_t -ds1511_nvram_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t pos, size_t size) +static int ds1511_nvram_write(void *priv, unsigned int pos, void *buf, + size_t size) { - ssize_t count; + int i; rtc_write(pos, DS1511_RAMADDR_LSB); - for (count = 0; count < size; count++) - rtc_write(*buf++, DS1511_RAMDATA); + for (i = 0; i < size; i++) + rtc_write(*(char *)buf++, DS1511_RAMDATA); - return count; + return 0; } -static struct bin_attribute ds1511_nvram_attr = { - .attr = { - .name = "nvram", - .mode = S_IRUGO | S_IWUSR, - }, +static struct nvmem_config ds1511_nvmem_cfg = { + .name = "ds1511_nvram", + .word_size = 1, + .stride = 1, .size = DS1511_RAM_MAX, - .read = ds1511_nvram_read, - .write = ds1511_nvram_write, + .reg_read = ds1511_nvram_read, + .reg_write = ds1511_nvram_write, }; static int ds1511_rtc_probe(struct platform_device *pdev) @@ -483,6 +478,10 @@ static int ds1511_rtc_probe(struct platform_device *pdev) pdata->rtc->ops = &ds1511_rtc_ops; + ds1511_nvmem_cfg.priv = &pdev->dev; + pdata->rtc->nvmem_config = &ds1511_nvmem_cfg; + pdata->rtc->nvram_old_abi = true; + ret = rtc_register_device(pdata->rtc); if (ret) return ret; @@ -501,18 +500,6 @@ static int ds1511_rtc_probe(struct platform_device *pdev) } } - ret = sysfs_create_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); - if (ret) - dev_err(&pdev->dev, "Unable to create sysfs entry: %s\n", - ds1511_nvram_attr.attr.name); - - return 0; -} - -static int ds1511_rtc_remove(struct platform_device *pdev) -{ - sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr); - return 0; } @@ -521,7 +508,6 @@ MODULE_ALIAS("platform:ds1511"); static struct platform_driver ds1511_rtc_driver = { .probe = ds1511_rtc_probe, - .remove = ds1511_rtc_remove, .driver = { .name = "ds1511", }, -- cgit v1.2.3-58-ga151 From 8a25c8f66c46077bd5ae8ea5f6fd6fa08ea8231a Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:23:25 +0100 Subject: rtc: clarify the RTC offset correction The RTC offset correction documentation is not very clear about the exact relationship between "offset" and the effect it has on the RTC. Supplement the documentation with an equation giving the relationship. Signed-off-by: Russell King Signed-off-by: Alexandre Belloni --- drivers/rtc/interface.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 9eb32ead63db..672b192f8153 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -1004,6 +1004,10 @@ int rtc_read_offset(struct rtc_device *rtc, long *offset) * to compensate for differences in the actual clock rate due to temperature, * the crystal, capacitor, etc. * + * The adjustment applied is as follows: + * t = t0 * (1 + offset * 1e-9) + * where t0 is the measured length of 1 RTC second with offset = 0 + * * Kernel interface to adjust an rtc clock offset. * Return 0 on success, or a negative number on error. * If the rtc offset is not setable (or not implemented), return -EINVAL -- cgit v1.2.3-58-ga151 From f94ffbc2c2a4128c4412bb483d0807722dfb682b Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:23:31 +0100 Subject: rtc: armada38x: add support for trimming the RTC Add support for trimming the RTC using the offset mechanism. This RTC supports two modes: low update mode and high update mode. Low update mode has finer precision than high update mode, so we use the low mode where possible. Signed-off-by: Russell King Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-armada38x.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 101 insertions(+) diff --git a/drivers/rtc/rtc-armada38x.c b/drivers/rtc/rtc-armada38x.c index 21f355c37eab..1e4978c96ffd 100644 --- a/drivers/rtc/rtc-armada38x.c +++ b/drivers/rtc/rtc-armada38x.c @@ -28,6 +28,8 @@ #define RTC_IRQ_AL_EN BIT(0) #define RTC_IRQ_FREQ_EN BIT(1) #define RTC_IRQ_FREQ_1HZ BIT(2) +#define RTC_CCR 0x18 +#define RTC_CCR_MODE BIT(15) #define RTC_TIME 0xC #define RTC_ALARM1 0x10 @@ -343,18 +345,117 @@ static irqreturn_t armada38x_rtc_alarm_irq(int irq, void *data) return IRQ_HANDLED; } +/* + * The information given in the Armada 388 functional spec is complex. + * They give two different formulas for calculating the offset value, + * but when considering "Offset" as an 8-bit signed integer, they both + * reduce down to (we shall rename "Offset" as "val" here): + * + * val = (f_ideal / f_measured - 1) / resolution where f_ideal = 32768 + * + * Converting to time, f = 1/t: + * val = (t_measured / t_ideal - 1) / resolution where t_ideal = 1/32768 + * + * => t_measured / t_ideal = val * resolution + 1 + * + * "offset" in the RTC interface is defined as: + * t = t0 * (1 + offset * 1e-9) + * where t is the desired period, t0 is the measured period with a zero + * offset, which is t_measured above. With t0 = t_measured and t = t_ideal, + * offset = (t_ideal / t_measured - 1) / 1e-9 + * + * => t_ideal / t_measured = offset * 1e-9 + 1 + * + * so: + * + * offset * 1e-9 + 1 = 1 / (val * resolution + 1) + * + * We want "resolution" to be an integer, so resolution = R * 1e-9, giving + * offset = 1e18 / (val * R + 1e9) - 1e9 + * val = (1e18 / (offset + 1e9) - 1e9) / R + * with a common transformation: + * f(x) = 1e18 / (x + 1e9) - 1e9 + * offset = f(val * R) + * val = f(offset) / R + * + * Armada 38x supports two modes, fine mode (954ppb) and coarse mode (3815ppb). + */ +static long armada38x_ppb_convert(long ppb) +{ + long div = ppb + 1000000000L; + + return div_s64(1000000000000000000LL + div / 2, div) - 1000000000L; +} + +static int armada38x_rtc_read_offset(struct device *dev, long *offset) +{ + struct armada38x_rtc *rtc = dev_get_drvdata(dev); + unsigned long ccr, flags; + long ppb_cor; + + spin_lock_irqsave(&rtc->lock, flags); + ccr = rtc->data->read_rtc_reg(rtc, RTC_CCR); + spin_unlock_irqrestore(&rtc->lock, flags); + + ppb_cor = (ccr & RTC_CCR_MODE ? 3815 : 954) * (s8)ccr; + /* ppb_cor + 1000000000L can never be zero */ + *offset = armada38x_ppb_convert(ppb_cor); + + return 0; +} + +static int armada38x_rtc_set_offset(struct device *dev, long offset) +{ + struct armada38x_rtc *rtc = dev_get_drvdata(dev); + unsigned long ccr = 0; + long ppb_cor, off; + + /* + * The maximum ppb_cor is -128 * 3815 .. 127 * 3815, but we + * need to clamp the input. This equates to -484270 .. 488558. + * Not only is this to stop out of range "off" but also to + * avoid the division by zero in armada38x_ppb_convert(). + */ + offset = clamp(offset, -484270L, 488558L); + + ppb_cor = armada38x_ppb_convert(offset); + + /* + * Use low update mode where possible, which gives a better + * resolution of correction. + */ + off = DIV_ROUND_CLOSEST(ppb_cor, 954); + if (off > 127 || off < -128) { + ccr = RTC_CCR_MODE; + off = DIV_ROUND_CLOSEST(ppb_cor, 3815); + } + + /* + * Armada 388 requires a bit pattern in bits 14..8 depending on + * the sign bit: { 0, ~S, S, S, S, S, S } + */ + ccr |= (off & 0x3fff) ^ 0x2000; + rtc_delayed_write(ccr, rtc, RTC_CCR); + + return 0; +} + static const struct rtc_class_ops armada38x_rtc_ops = { .read_time = armada38x_rtc_read_time, .set_time = armada38x_rtc_set_time, .read_alarm = armada38x_rtc_read_alarm, .set_alarm = armada38x_rtc_set_alarm, .alarm_irq_enable = armada38x_rtc_alarm_irq_enable, + .read_offset = armada38x_rtc_read_offset, + .set_offset = armada38x_rtc_set_offset, }; static const struct rtc_class_ops armada38x_rtc_ops_noirq = { .read_time = armada38x_rtc_read_time, .set_time = armada38x_rtc_set_time, .read_alarm = armada38x_rtc_read_alarm, + .read_offset = armada38x_rtc_read_offset, + .set_offset = armada38x_rtc_set_offset, }; static const struct armada38x_rtc_data armada38x_data = { -- cgit v1.2.3-58-ga151 From bc3bee0252725240ffa62180d387cc245179c549 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 Sep 2017 11:23:36 +0100 Subject: rtc: pcf8523: add support for trimming the RTC oscillator Add support for reading and writing the RTC offset register, converting it to the corresponding parts-per-billion value. When setting the drift, the PCF8523 has two modes: one applies the adjustment every two hours, the other applies the adjustment every minute. We select between these two modes according to which ever gives the closest PPB value to the one requested. Signed-off-by: Russell King Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf8523.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c index 28c48b3c1946..c312af0db729 100644 --- a/drivers/rtc/rtc-pcf8523.c +++ b/drivers/rtc/rtc-pcf8523.c @@ -35,6 +35,9 @@ #define REG_MONTHS 0x08 #define REG_YEARS 0x09 +#define REG_OFFSET 0x0e +#define REG_OFFSET_MODE BIT(7) + struct pcf8523 { struct rtc_device *rtc; }; @@ -272,10 +275,47 @@ static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, #define pcf8523_rtc_ioctl NULL #endif +static int pcf8523_rtc_read_offset(struct device *dev, long *offset) +{ + struct i2c_client *client = to_i2c_client(dev); + int err; + u8 value; + s8 val; + + err = pcf8523_read(client, REG_OFFSET, &value); + if (err < 0) + return err; + + /* sign extend the 7-bit offset value */ + val = value << 1; + *offset = (value & REG_OFFSET_MODE ? 4069 : 4340) * (val >> 1); + + return 0; +} + +static int pcf8523_rtc_set_offset(struct device *dev, long offset) +{ + struct i2c_client *client = to_i2c_client(dev); + long reg_m0, reg_m1; + u8 value; + + reg_m0 = clamp(DIV_ROUND_CLOSEST(offset, 4340), -64L, 63L); + reg_m1 = clamp(DIV_ROUND_CLOSEST(offset, 4069), -64L, 63L); + + if (abs(reg_m0 * 4340 - offset) < abs(reg_m1 * 4069 - offset)) + value = reg_m0 & 0x7f; + else + value = (reg_m1 & 0x7f) | REG_OFFSET_MODE; + + return pcf8523_write(client, REG_OFFSET, value); +} + static const struct rtc_class_ops pcf8523_rtc_ops = { .read_time = pcf8523_rtc_read_time, .set_time = pcf8523_rtc_set_time, .ioctl = pcf8523_rtc_ioctl, + .read_offset = pcf8523_rtc_read_offset, + .set_offset = pcf8523_rtc_set_offset, }; static int pcf8523_probe(struct i2c_client *client, -- cgit v1.2.3-58-ga151 From 1901142ba8d5bf9f21b86d33770be8309071c25d Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 23 Oct 2017 15:16:44 +0800 Subject: dt-bindings: rtc: mediatek: add bindings for MediaTek SoC based RTC Add device-tree binding for MediaTek SoC based RTC Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- .../devicetree/bindings/rtc/rtc-mt7622.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt7622.txt diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt new file mode 100644 index 000000000000..09fe8f51476f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-mt7622.txt @@ -0,0 +1,21 @@ +Device-Tree bindings for MediaTek SoC based RTC + +Required properties: +- compatible : Should be + "mediatek,mt7622-rtc", "mediatek,soc-rtc" : for MT7622 SoC +- reg : Specifies base physical address and size of the registers; +- interrupts : Should contain the interrupt for RTC alarm; +- clocks : Specifies list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : Should contain "rtc" entries + +Example: + +rtc: rtc@10212800 { + compatible = "mediatek,mt7622-rtc", + "mediatek,soc-rtc"; + reg = <0 0x10212800 0 0x200>; + interrupts = ; + clocks = <&topckgen CLK_TOP_RTC>; + clock-names = "rtc"; +}; -- cgit v1.2.3-58-ga151 From ba5d018135ef4eb59e6143bff0aaeef118ff78a1 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 23 Oct 2017 15:16:45 +0800 Subject: rtc: mediatek: add driver for RTC on MT7622 SoC This patch introduces the driver for the RTC on MT7622 SoC. Signed-off-by: Sean Wang Reviewed-by: Yingjoe Chen Signed-off-by: Alexandre Belloni --- drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mt7622.c | 422 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 433 insertions(+) create mode 100644 drivers/rtc/rtc-mt7622.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e0e58f3b1420..322752ebc5a7 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1715,6 +1715,16 @@ config RTC_DRV_MT6397 If you want to use Mediatek(R) RTC interface, select Y or M here. +config RTC_DRV_MT7622 + tristate "MediaTek SoC based RTC" + depends on ARCH_MEDIATEK || COMPILE_TEST + help + This enables support for the real time clock built in the MediaTek + SoCs. + + This drive can also be built as a module. If so, the module + will be called rtc-mt7622. + config RTC_DRV_XGENE tristate "APM X-Gene RTC" depends on HAS_IOMEM diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 7230014c92af..5ec891a81f4f 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o obj-$(CONFIG_RTC_DRV_VRTC) += rtc-mrst.o obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o +obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o diff --git a/drivers/rtc/rtc-mt7622.c b/drivers/rtc/rtc-mt7622.c new file mode 100644 index 000000000000..d79b9ae4d237 --- /dev/null +++ b/drivers/rtc/rtc-mt7622.c @@ -0,0 +1,422 @@ +/* + * Driver for MediaTek SoC based RTC + * + * Copyright (C) 2017 Sean Wang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define MTK_RTC_DEV KBUILD_MODNAME + +#define MTK_RTC_PWRCHK1 0x4 +#define RTC_PWRCHK1_MAGIC 0xc6 + +#define MTK_RTC_PWRCHK2 0x8 +#define RTC_PWRCHK2_MAGIC 0x9a + +#define MTK_RTC_KEY 0xc +#define RTC_KEY_MAGIC 0x59 + +#define MTK_RTC_PROT1 0x10 +#define RTC_PROT1_MAGIC 0xa3 + +#define MTK_RTC_PROT2 0x14 +#define RTC_PROT2_MAGIC 0x57 + +#define MTK_RTC_PROT3 0x18 +#define RTC_PROT3_MAGIC 0x67 + +#define MTK_RTC_PROT4 0x1c +#define RTC_PROT4_MAGIC 0xd2 + +#define MTK_RTC_CTL 0x20 +#define RTC_RC_STOP BIT(0) + +#define MTK_RTC_DEBNCE 0x2c +#define RTC_DEBNCE_MASK GENMASK(2, 0) + +#define MTK_RTC_INT 0x30 +#define RTC_INT_AL_STA BIT(4) + +/* + * Ranges from 0x40 to 0x78 provide RTC time setup for year, month, + * day of month, day of week, hour, minute and second. + */ +#define MTK_RTC_TREG(_t, _f) (0x40 + (0x4 * (_f)) + ((_t) * 0x20)) + +#define MTK_RTC_AL_CTL 0x7c +#define RTC_AL_EN BIT(0) +#define RTC_AL_ALL GENMASK(7, 0) + +/* + * The offset is used in the translation for the year between in struct + * rtc_time and in hardware register MTK_RTC_TREG(x,MTK_YEA) + */ +#define MTK_RTC_TM_YR_OFFSET 100 + +/* + * The lowest value for the valid tm_year. RTC hardware would take incorrectly + * tm_year 100 as not a leap year and thus it is also required being excluded + * from the valid options. + */ +#define MTK_RTC_TM_YR_L (MTK_RTC_TM_YR_OFFSET + 1) + +/* + * The most year the RTC can hold is 99 and the next to 99 in year register + * would be wraparound to 0, for MT7622. + */ +#define MTK_RTC_HW_YR_LIMIT 99 + +/* The highest value for the valid tm_year */ +#define MTK_RTC_TM_YR_H (MTK_RTC_TM_YR_OFFSET + MTK_RTC_HW_YR_LIMIT) + +/* Simple macro helps to check whether the hardware supports the tm_year */ +#define MTK_RTC_TM_YR_VALID(_y) ((_y) >= MTK_RTC_TM_YR_L && \ + (_y) <= MTK_RTC_TM_YR_H) + +/* Types of the function the RTC provides are time counter and alarm. */ +enum { + MTK_TC, + MTK_AL, +}; + +/* Indexes are used for the pointer to relevant registers in MTK_RTC_TREG */ +enum { + MTK_YEA, + MTK_MON, + MTK_DOM, + MTK_DOW, + MTK_HOU, + MTK_MIN, + MTK_SEC +}; + +struct mtk_rtc { + struct rtc_device *rtc; + void __iomem *base; + int irq; + struct clk *clk; +}; + +static void mtk_w32(struct mtk_rtc *rtc, u32 reg, u32 val) +{ + writel_relaxed(val, rtc->base + reg); +} + +static u32 mtk_r32(struct mtk_rtc *rtc, u32 reg) +{ + return readl_relaxed(rtc->base + reg); +} + +static void mtk_rmw(struct mtk_rtc *rtc, u32 reg, u32 mask, u32 set) +{ + u32 val; + + val = mtk_r32(rtc, reg); + val &= ~mask; + val |= set; + mtk_w32(rtc, reg, val); +} + +static void mtk_set(struct mtk_rtc *rtc, u32 reg, u32 val) +{ + mtk_rmw(rtc, reg, 0, val); +} + +static void mtk_clr(struct mtk_rtc *rtc, u32 reg, u32 val) +{ + mtk_rmw(rtc, reg, val, 0); +} + +static void mtk_rtc_hw_init(struct mtk_rtc *hw) +{ + /* The setup of the init sequence is for allowing RTC got to work */ + mtk_w32(hw, MTK_RTC_PWRCHK1, RTC_PWRCHK1_MAGIC); + mtk_w32(hw, MTK_RTC_PWRCHK2, RTC_PWRCHK2_MAGIC); + mtk_w32(hw, MTK_RTC_KEY, RTC_KEY_MAGIC); + mtk_w32(hw, MTK_RTC_PROT1, RTC_PROT1_MAGIC); + mtk_w32(hw, MTK_RTC_PROT2, RTC_PROT2_MAGIC); + mtk_w32(hw, MTK_RTC_PROT3, RTC_PROT3_MAGIC); + mtk_w32(hw, MTK_RTC_PROT4, RTC_PROT4_MAGIC); + mtk_rmw(hw, MTK_RTC_DEBNCE, RTC_DEBNCE_MASK, 0); + mtk_clr(hw, MTK_RTC_CTL, RTC_RC_STOP); +} + +static void mtk_rtc_get_alarm_or_time(struct mtk_rtc *hw, struct rtc_time *tm, + int time_alarm) +{ + u32 year, mon, mday, wday, hour, min, sec; + + /* + * Read again until the field of the second is not changed which + * ensures all fields in the consistent state. Note that MTK_SEC must + * be read first. In this way, it guarantees the others remain not + * changed when the results for two MTK_SEC consecutive reads are same. + */ + do { + sec = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC)); + min = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_MIN)); + hour = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_HOU)); + wday = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_DOW)); + mday = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_DOM)); + mon = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_MON)); + year = mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_YEA)); + } while (sec != mtk_r32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC))); + + tm->tm_sec = sec; + tm->tm_min = min; + tm->tm_hour = hour; + tm->tm_wday = wday; + tm->tm_mday = mday; + tm->tm_mon = mon - 1; + + /* Rebase to the absolute year which userspace queries */ + tm->tm_year = year + MTK_RTC_TM_YR_OFFSET; +} + +static void mtk_rtc_set_alarm_or_time(struct mtk_rtc *hw, struct rtc_time *tm, + int time_alarm) +{ + u32 year; + + /* Rebase to the relative year which RTC hardware requires */ + year = tm->tm_year - MTK_RTC_TM_YR_OFFSET; + + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_YEA), year); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_MON), tm->tm_mon + 1); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_DOW), tm->tm_wday); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_DOM), tm->tm_mday); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_HOU), tm->tm_hour); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_MIN), tm->tm_min); + mtk_w32(hw, MTK_RTC_TREG(time_alarm, MTK_SEC), tm->tm_sec); +} + +static irqreturn_t mtk_rtc_alarmirq(int irq, void *id) +{ + struct mtk_rtc *hw = (struct mtk_rtc *)id; + u32 irq_sta; + + irq_sta = mtk_r32(hw, MTK_RTC_INT); + if (irq_sta & RTC_INT_AL_STA) { + /* Stop alarm also implicitly disables the alarm interrupt */ + mtk_w32(hw, MTK_RTC_AL_CTL, 0); + rtc_update_irq(hw->rtc, 1, RTC_IRQF | RTC_AF); + + /* Ack alarm interrupt status */ + mtk_w32(hw, MTK_RTC_INT, RTC_INT_AL_STA); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int mtk_rtc_gettime(struct device *dev, struct rtc_time *tm) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + + mtk_rtc_get_alarm_or_time(hw, tm, MTK_TC); + + return rtc_valid_tm(tm); +} + +static int mtk_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + + if (!MTK_RTC_TM_YR_VALID(tm->tm_year)) + return -EINVAL; + + /* Stop time counter before setting a new one*/ + mtk_set(hw, MTK_RTC_CTL, RTC_RC_STOP); + + mtk_rtc_set_alarm_or_time(hw, tm, MTK_TC); + + /* Restart the time counter */ + mtk_clr(hw, MTK_RTC_CTL, RTC_RC_STOP); + + return 0; +} + +static int mtk_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + struct rtc_time *alrm_tm = &wkalrm->time; + + mtk_rtc_get_alarm_or_time(hw, alrm_tm, MTK_AL); + + wkalrm->enabled = !!(mtk_r32(hw, MTK_RTC_AL_CTL) & RTC_AL_EN); + wkalrm->pending = !!(mtk_r32(hw, MTK_RTC_INT) & RTC_INT_AL_STA); + + return 0; +} + +static int mtk_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + struct rtc_time *alrm_tm = &wkalrm->time; + + if (!MTK_RTC_TM_YR_VALID(alrm_tm->tm_year)) + return -EINVAL; + + /* + * Stop the alarm also implicitly including disables interrupt before + * setting a new one. + */ + mtk_clr(hw, MTK_RTC_AL_CTL, RTC_AL_EN); + + /* + * Avoid contention between mtk_rtc_setalarm and IRQ handler so that + * disabling the interrupt and awaiting for pending IRQ handler to + * complete. + */ + synchronize_irq(hw->irq); + + mtk_rtc_set_alarm_or_time(hw, alrm_tm, MTK_AL); + + /* Restart the alarm with the new setup */ + mtk_w32(hw, MTK_RTC_AL_CTL, RTC_AL_ALL); + + return 0; +} + +static const struct rtc_class_ops mtk_rtc_ops = { + .read_time = mtk_rtc_gettime, + .set_time = mtk_rtc_settime, + .read_alarm = mtk_rtc_getalarm, + .set_alarm = mtk_rtc_setalarm, +}; + +static const struct of_device_id mtk_rtc_match[] = { + { .compatible = "mediatek,mt7622-rtc" }, + { .compatible = "mediatek,soc-rtc" }, + {}, +}; + +static int mtk_rtc_probe(struct platform_device *pdev) +{ + struct mtk_rtc *hw; + struct resource *res; + int ret; + + hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + + platform_set_drvdata(pdev, hw); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hw->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hw->base)) + return PTR_ERR(hw->base); + + hw->clk = devm_clk_get(&pdev->dev, "rtc"); + if (IS_ERR(hw->clk)) { + dev_err(&pdev->dev, "No clock\n"); + return PTR_ERR(hw->clk); + } + + ret = clk_prepare_enable(hw->clk); + if (ret) + return ret; + + hw->irq = platform_get_irq(pdev, 0); + if (hw->irq < 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + ret = hw->irq; + goto err; + } + + ret = devm_request_irq(&pdev->dev, hw->irq, mtk_rtc_alarmirq, + 0, dev_name(&pdev->dev), hw); + if (ret) { + dev_err(&pdev->dev, "Can't request IRQ\n"); + goto err; + } + + mtk_rtc_hw_init(hw); + + device_init_wakeup(&pdev->dev, true); + + hw->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, + &mtk_rtc_ops, THIS_MODULE); + if (IS_ERR(hw->rtc)) { + ret = PTR_ERR(hw->rtc); + dev_err(&pdev->dev, "Unable to register device\n"); + goto err; + } + + return 0; +err: + clk_disable_unprepare(hw->clk); + + return ret; +} + +static int mtk_rtc_remove(struct platform_device *pdev) +{ + struct mtk_rtc *hw = platform_get_drvdata(pdev); + + clk_disable_unprepare(hw->clk); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk_rtc_suspend(struct device *dev) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(hw->irq); + + return 0; +} + +static int mtk_rtc_resume(struct device *dev) +{ + struct mtk_rtc *hw = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(hw->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mtk_rtc_pm_ops, mtk_rtc_suspend, mtk_rtc_resume); + +#define MTK_RTC_PM_OPS (&mtk_rtc_pm_ops) +#else /* CONFIG_PM */ +#define MTK_RTC_PM_OPS NULL +#endif /* CONFIG_PM */ + +static struct platform_driver mtk_rtc_driver = { + .probe = mtk_rtc_probe, + .remove = mtk_rtc_remove, + .driver = { + .name = MTK_RTC_DEV, + .of_match_table = mtk_rtc_match, + .pm = MTK_RTC_PM_OPS, + }, +}; + +module_platform_driver(mtk_rtc_driver); + +MODULE_DESCRIPTION("MediaTek SoC based RTC Driver"); +MODULE_AUTHOR("Sean Wang "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-58-ga151 From d00a7ed288e7943fcf253c6402abb09f0f9689d0 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 23 Oct 2017 15:16:46 +0800 Subject: rtc: mediatek: enhance the description for MediaTek PMIC based RTC Give a better description for original MediaTek RTC driver as PMIC based RTC in order to distinguish SoC based RTC. Also turning all words with Mediatek to MediaTek here. Cc: Eddie Huang Signed-off-by: Sean Wang Acked-by: Eddie Huang Signed-off-by: Alexandre Belloni --- drivers/rtc/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 322752ebc5a7..616fe53c788e 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1706,14 +1706,14 @@ config RTC_DRV_MOXART will be called rtc-moxart config RTC_DRV_MT6397 - tristate "Mediatek Real Time Clock driver" + tristate "MediaTek PMIC based RTC" depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN) help - This selects the Mediatek(R) RTC driver. RTC is part of Mediatek + This selects the MediaTek(R) RTC driver. RTC is part of MediaTek MT6397 PMIC. You should enable MT6397 PMIC MFD before select - Mediatek(R) RTC driver. + MediaTek(R) RTC driver. - If you want to use Mediatek(R) RTC interface, select Y or M here. + If you want to use MediaTek(R) RTC interface, select Y or M here. config RTC_DRV_MT7622 tristate "MediaTek SoC based RTC" -- cgit v1.2.3-58-ga151 From 1bb5a74b31151008480ebaa831c1ec1b007e8f43 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Mon, 23 Oct 2017 15:16:47 +0800 Subject: rtc: mediatek: update MAINTAINERS entry with MediaTek RTC driver I work for MediaTek on maintaining the MediaTek SoC based RTC driver for the existing SoCs and keep adding support for the following SoCs in the future. Cc: Eddie Huang Signed-off-by: Sean Wang Signed-off-by: Alexandre Belloni --- MAINTAINERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2281af4b41b6..332c04ccc05f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1579,10 +1579,13 @@ F: drivers/rtc/rtc-armada38x.c ARM/Mediatek RTC DRIVER M: Eddie Huang +M: Sean Wang L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained +F: Documentation/devicetree/bindings/rtc/rtc-mt7622.txt F: drivers/rtc/rtc-mt6397.c +F: drivers/rtc/rtc-mt7622.c ARM/Mediatek SoC support M: Matthias Brugger -- cgit v1.2.3-58-ga151 From 47dd47292828a552d62d0e68b7cd6bdc99d9e0aa Mon Sep 17 00:00:00 2001 From: Bastian Stender Date: Tue, 17 Oct 2017 14:46:07 +0200 Subject: rtc: ds1307: add OF and ACPI entries for Epson RX8130 Make Epson RX8130 device tree and ACPI aware. Fixes: ee0981be7704 ("rtc: ds1307: Add support for Epson RX8130CE") Signed-off-by: Bastian Stender Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1307.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index 1cca20fdd025..923dde912f60 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -325,6 +325,10 @@ static const struct of_device_id ds1307_of_match[] = { .compatible = "isil,isl12057", .data = (void *)ds_1337 }, + { + .compatible = "epson,rx8130", + .data = (void *)rx_8130 + }, { } }; MODULE_DEVICE_TABLE(of, ds1307_of_match); @@ -348,6 +352,7 @@ static const struct acpi_device_id ds1307_acpi_ids[] = { { .id = "PT7C4338", .driver_data = ds_1307 }, { .id = "RX8025", .driver_data = rx_8025 }, { .id = "ISL12057", .driver_data = ds_1337 }, + { .id = "RX8130", .driver_data = rx_8130 }, { } }; MODULE_DEVICE_TABLE(acpi, ds1307_acpi_ids); -- cgit v1.2.3-58-ga151 From 3ba2c76a9d3a339cd1b77e88915680ae2e9ac2da Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 27 Oct 2017 13:09:47 +0200 Subject: rtc: ds1390: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. Worse, the compatible is documented but doesn't currently match the driver. Add the proper compatible to the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-ds1390.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c index aa0d2c6f1edc..4d5b007d7fc6 100644 --- a/drivers/rtc/rtc-ds1390.c +++ b/drivers/rtc/rtc-ds1390.c @@ -216,9 +216,16 @@ static int ds1390_probe(struct spi_device *spi) return res; } +static const struct of_device_id ds1390_of_match[] = { + { .compatible = "dallas,ds1390" }, + {} +}; +MODULE_DEVICE_TABLE(of, ds1390_of_match); + static struct spi_driver ds1390_driver = { .driver = { .name = "rtc-ds1390", + .of_match_table = of_match_ptr(ds1390_of_match), }, .probe = ds1390_probe, }; -- cgit v1.2.3-58-ga151 From 26e480f7bb7840fc0daa9c3af7c4501b2cf5902f Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:06:44 +0200 Subject: rtc: omap: fix error path when pinctrl_register fails If pinctrl_register() fails probe will return with an error without locking the RTC and disabling pm_runtime. Set ret and jump to err instead. Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration") Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 13f7cd11c07e..3bdc041fc2e9 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -830,7 +830,8 @@ static int omap_rtc_probe(struct platform_device *pdev) rtc->pctldev = pinctrl_register(&rtc_pinctrl_desc, &pdev->dev, rtc); if (IS_ERR(rtc->pctldev)) { dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); - return PTR_ERR(rtc->pctldev); + ret = PTR_ERR(rtc->pctldev); + goto err; } return 0; -- cgit v1.2.3-58-ga151 From 57072758623fa4f3019bce65e2b00f24af8dfdd7 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 13 Oct 2017 00:06:45 +0200 Subject: rtc: omap: switch to rtc_register_device This removes a possible race condition and crash and allows for further improvement of the driver. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 3bdc041fc2e9..d56d937966dc 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -797,13 +797,14 @@ static int omap_rtc_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, true); - rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, - &omap_rtc_ops, THIS_MODULE); + rtc->rtc = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(rtc->rtc)) { ret = PTR_ERR(rtc->rtc); goto err; } + rtc->rtc->ops = &omap_rtc_ops; + /* handle periodic and alarm irqs */ ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0, dev_name(&rtc->rtc->dev), rtc); @@ -834,6 +835,10 @@ static int omap_rtc_probe(struct platform_device *pdev) goto err; } + ret = rtc_register_device(rtc->rtc); + if (ret) + goto err; + return 0; err: -- cgit v1.2.3-58-ga151 From b6ee15efe6788113c4184843365f74fde08e6284 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Tue, 31 Oct 2017 17:27:31 +0100 Subject: rtc: omap: Support scratch registers Register an nvmem device to expose the 3 scratch registers (total of 12 bytes) to both userspace and kernel space. Reviewed-by: Sekhar Nori Tested-by: Keerthy Reviewed-by: Keerthy Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 45 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index d56d937966dc..1d666ac9ef70 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -70,6 +70,10 @@ #define OMAP_RTC_COMP_MSB_REG 0x50 #define OMAP_RTC_OSC_REG 0x54 +#define OMAP_RTC_SCRATCH0_REG 0x60 +#define OMAP_RTC_SCRATCH1_REG 0x64 +#define OMAP_RTC_SCRATCH2_REG 0x68 + #define OMAP_RTC_KICK0_REG 0x6c #define OMAP_RTC_KICK1_REG 0x70 @@ -667,6 +671,45 @@ static struct pinctrl_desc rtc_pinctrl_desc = { .owner = THIS_MODULE, }; +static int omap_rtc_scratch_read(void *priv, unsigned int offset, void *_val, + size_t bytes) +{ + struct omap_rtc *rtc = priv; + u32 *val = _val; + int i; + + for (i = 0; i < bytes / 4; i++) + val[i] = rtc_readl(rtc, + OMAP_RTC_SCRATCH0_REG + offset + (i * 4)); + + return 0; +} + +static int omap_rtc_scratch_write(void *priv, unsigned int offset, void *_val, + size_t bytes) +{ + struct omap_rtc *rtc = priv; + u32 *val = _val; + int i; + + rtc->type->unlock(rtc); + for (i = 0; i < bytes / 4; i++) + rtc_writel(rtc, + OMAP_RTC_SCRATCH0_REG + offset + (i * 4), val[i]); + rtc->type->lock(rtc); + + return 0; +} + +static struct nvmem_config omap_rtc_nvmem_config = { + .name = "omap_rtc_scratch", + .word_size = 4, + .stride = 4, + .size = OMAP_RTC_KICK0_REG - OMAP_RTC_SCRATCH0_REG, + .reg_read = omap_rtc_scratch_read, + .reg_write = omap_rtc_scratch_write, +}; + static int omap_rtc_probe(struct platform_device *pdev) { struct omap_rtc *rtc; @@ -804,6 +847,8 @@ static int omap_rtc_probe(struct platform_device *pdev) } rtc->rtc->ops = &omap_rtc_ops; + omap_rtc_nvmem_config.priv = rtc; + rtc->rtc->nvmem_config = &omap_rtc_nvmem_config; /* handle periodic and alarm irqs */ ret = devm_request_irq(&pdev->dev, rtc->irq_timer, rtc_irq, 0, -- cgit v1.2.3-58-ga151 From a9687aa2764dd2669602bd19dc636cbeef5293d5 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 1 Nov 2017 08:01:20 -0700 Subject: rtc: add support for NXP PCF85363 real-time clock Note that alarms are not currently implemented. 64 bytes of nvmem is supported and exposed in sysfs (# is the instance number, starting with 0): /sys/bus/nvmem/devices/pcf85363-#/nvmem Signed-off-by: Eric Nelson Reviewed-by: Fabio Estevam Tested-by: Alexandre Belloni Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/rtc/pcf85363.txt | 17 ++ drivers/rtc/Kconfig | 13 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-pcf85363.c | 220 +++++++++++++++++++++ 4 files changed, 251 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/pcf85363.txt create mode 100644 drivers/rtc/rtc-pcf85363.c diff --git a/Documentation/devicetree/bindings/rtc/pcf85363.txt b/Documentation/devicetree/bindings/rtc/pcf85363.txt new file mode 100644 index 000000000000..76fdabc59742 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pcf85363.txt @@ -0,0 +1,17 @@ +NXP PCF85363 Real Time Clock +============================ + +Required properties: +- compatible: Should contain "nxp,pcf85363". +- reg: I2C address for chip. + +Optional properties: +- interrupts: IRQ line for the RTC (not implemented). + +Example: + +pcf85363: pcf85363@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; +}; + diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 616fe53c788e..47663e03f9a8 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -433,6 +433,19 @@ config RTC_DRV_PCF85063 This driver can also be built as a module. If so, the module will be called rtc-pcf85063. +config RTC_DRV_PCF85363 + tristate "NXP PCF85363" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the PCF85363 RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-pcf85363. + + The nvmem interface will be named pcf85363-#, where # is the + zero-based instance number. + config RTC_DRV_PCF8563 tristate "Philips PCF8563/Epson RTC8564" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 5ec891a81f4f..0b5acd6b5cc3 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -114,6 +114,7 @@ obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o obj-$(CONFIG_RTC_DRV_PCF2127) += rtc-pcf2127.o obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o obj-$(CONFIG_RTC_DRV_PCF85063) += rtc-pcf85063.o +obj-$(CONFIG_RTC_DRV_PCF85363) += rtc-pcf85363.o obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c new file mode 100644 index 000000000000..ea04e9f0930b --- /dev/null +++ b/drivers/rtc/rtc-pcf85363.c @@ -0,0 +1,220 @@ +/* + * drivers/rtc/rtc-pcf85363.c + * + * Driver for NXP PCF85363 real-time clock. + * + * Copyright (C) 2017 Eric Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based loosely on rtc-8583 by Russell King, Wolfram Sang and Juergen Beisert + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Date/Time registers + */ +#define DT_100THS 0x00 +#define DT_SECS 0x01 +#define DT_MINUTES 0x02 +#define DT_HOURS 0x03 +#define DT_DAYS 0x04 +#define DT_WEEKDAYS 0x05 +#define DT_MONTHS 0x06 +#define DT_YEARS 0x07 + +/* + * Alarm registers + */ +#define DT_SECOND_ALM1 0x08 +#define DT_MINUTE_ALM1 0x09 +#define DT_HOUR_ALM1 0x0a +#define DT_DAY_ALM1 0x0b +#define DT_MONTH_ALM1 0x0c +#define DT_MINUTE_ALM2 0x0d +#define DT_HOUR_ALM2 0x0e +#define DT_WEEKDAY_ALM2 0x0f +#define DT_ALARM_EN 0x10 + +/* + * Time stamp registers + */ +#define DT_TIMESTAMP1 0x11 +#define DT_TIMESTAMP2 0x17 +#define DT_TIMESTAMP3 0x1d +#define DT_TS_MODE 0x23 + +/* + * control registers + */ +#define CTRL_OFFSET 0x24 +#define CTRL_OSCILLATOR 0x25 +#define CTRL_BATTERY 0x26 +#define CTRL_PIN_IO 0x27 +#define CTRL_FUNCTION 0x28 +#define CTRL_INTA_EN 0x29 +#define CTRL_INTB_EN 0x2a +#define CTRL_FLAGS 0x2b +#define CTRL_RAMBYTE 0x2c +#define CTRL_WDOG 0x2d +#define CTRL_STOP_EN 0x2e +#define CTRL_RESETS 0x2f +#define CTRL_RAM 0x40 + +#define NVRAM_SIZE 0x40 + +static struct i2c_driver pcf85363_driver; + +struct pcf85363 { + struct device *dev; + struct rtc_device *rtc; + struct nvmem_config nvmem_cfg; + struct regmap *regmap; +}; + +static int pcf85363_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct pcf85363 *pcf85363 = dev_get_drvdata(dev); + unsigned char buf[DT_YEARS + 1]; + int ret, len = sizeof(buf); + + /* read the RTC date and time registers all at once */ + ret = regmap_bulk_read(pcf85363->regmap, DT_100THS, buf, len); + if (ret) { + dev_err(dev, "%s: error %d\n", __func__, ret); + return ret; + } + + tm->tm_year = bcd2bin(buf[DT_YEARS]); + /* adjust for 1900 base of rtc_time */ + tm->tm_year += 100; + + tm->tm_wday = buf[DT_WEEKDAYS] & 7; + buf[DT_SECS] &= 0x7F; + tm->tm_sec = bcd2bin(buf[DT_SECS]); + buf[DT_MINUTES] &= 0x7F; + tm->tm_min = bcd2bin(buf[DT_MINUTES]); + tm->tm_hour = bcd2bin(buf[DT_HOURS]); + tm->tm_mday = bcd2bin(buf[DT_DAYS]); + tm->tm_mon = bcd2bin(buf[DT_MONTHS]) - 1; + + return 0; +} + +static int pcf85363_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct pcf85363 *pcf85363 = dev_get_drvdata(dev); + unsigned char buf[DT_YEARS + 1]; + int len = sizeof(buf); + + buf[DT_100THS] = 0; + buf[DT_SECS] = bin2bcd(tm->tm_sec); + buf[DT_MINUTES] = bin2bcd(tm->tm_min); + buf[DT_HOURS] = bin2bcd(tm->tm_hour); + buf[DT_DAYS] = bin2bcd(tm->tm_mday); + buf[DT_WEEKDAYS] = tm->tm_wday; + buf[DT_MONTHS] = bin2bcd(tm->tm_mon + 1); + buf[DT_YEARS] = bin2bcd(tm->tm_year % 100); + + return regmap_bulk_write(pcf85363->regmap, DT_100THS, + buf, len); +} + +static const struct rtc_class_ops rtc_ops = { + .read_time = pcf85363_rtc_read_time, + .set_time = pcf85363_rtc_set_time, +}; + +static int pcf85363_nvram_read(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + struct pcf85363 *pcf85363 = priv; + + return regmap_bulk_read(pcf85363->regmap, CTRL_RAM + offset, + val, bytes); +} + +static int pcf85363_nvram_write(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + struct pcf85363 *pcf85363 = priv; + + return regmap_bulk_write(pcf85363->regmap, CTRL_RAM + offset, + val, bytes); +} + +static const struct regmap_config regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int pcf85363_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf85363 *pcf85363; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + pcf85363 = devm_kzalloc(&client->dev, sizeof(struct pcf85363), + GFP_KERNEL); + if (!pcf85363) + return -ENOMEM; + + pcf85363->regmap = devm_regmap_init_i2c(client, ®map_config); + if (IS_ERR(pcf85363->regmap)) { + dev_err(&client->dev, "regmap allocation failed\n"); + return PTR_ERR(pcf85363->regmap); + } + + pcf85363->dev = &client->dev; + i2c_set_clientdata(client, pcf85363); + + pcf85363->rtc = devm_rtc_allocate_device(pcf85363->dev); + if (IS_ERR(pcf85363->rtc)) + return PTR_ERR(pcf85363->rtc); + + pcf85363->nvmem_cfg.name = "pcf85363-"; + pcf85363->nvmem_cfg.word_size = 1; + pcf85363->nvmem_cfg.stride = 1; + pcf85363->nvmem_cfg.size = NVRAM_SIZE; + pcf85363->nvmem_cfg.reg_read = pcf85363_nvram_read; + pcf85363->nvmem_cfg.reg_write = pcf85363_nvram_write; + pcf85363->nvmem_cfg.priv = pcf85363; + pcf85363->rtc->nvmem_config = &pcf85363->nvmem_cfg; + pcf85363->rtc->ops = &rtc_ops; + + return rtc_register_device(pcf85363->rtc); +} + +static const struct of_device_id dev_ids[] = { + { .compatible = "nxp,pcf85363" }, + {} +}; +MODULE_DEVICE_TABLE(of, dev_ids); + +static struct i2c_driver pcf85363_driver = { + .driver = { + .name = "pcf85363", + .of_match_table = of_match_ptr(dev_ids), + }, + .probe = pcf85363_probe, +}; + +module_i2c_driver(pcf85363_driver); + +MODULE_AUTHOR("Eric Nelson"); +MODULE_DESCRIPTION("pcf85363 I2C RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-58-ga151 From de6042d2fa8afe22b76e3c68fd6e9584c9415a3b Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Nov 2017 18:58:12 -0700 Subject: rtc: m41t80: m41t80_sqw_set_rate should return 0 on success Previously it was returning -EINVAL upon success. Signed-off-by: Troy Kisky Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m41t80.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index f4c070ea8384..8f5843169dc2 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -510,10 +510,7 @@ static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, reg = (reg & 0x0f) | (val << 4); ret = i2c_smbus_write_byte_data(client, reg_sqw, reg); - if (ret < 0) - return ret; - - return -EINVAL; + return ret; } static int m41t80_sqw_control(struct clk_hw *hw, bool enable) -- cgit v1.2.3-58-ga151 From c8384bb04261b9d32fe7402a6068ddaf38913b23 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Nov 2017 18:58:13 -0700 Subject: rtc: m41t80: fix m41t80_sqw_round_rate return value Previously it was returning the best of 32768, 8192, 1024, 64, 2, 0 Now, best of 32768, 8192, 4096, 2048, 1024, 512, 256, 128, 64, 32, 16, 8, 4, 2, 1, 0 Signed-off-by: Troy Kisky Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m41t80.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 8f5843169dc2..42fc735a5446 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -468,18 +468,13 @@ static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw, static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - int i, freq = M41T80_SQW_MAX_FREQ; - - if (freq <= rate) - return freq; - - for (i = 2; i <= ilog2(M41T80_SQW_MAX_FREQ); i++) { - freq /= 1 << i; - if (freq <= rate) - return freq; - } - - return 0; + if (rate >= M41T80_SQW_MAX_FREQ) + return M41T80_SQW_MAX_FREQ; + if (rate >= M41T80_SQW_MAX_FREQ / 4) + return M41T80_SQW_MAX_FREQ / 4; + if (!rate) + return 0; + return 1 << ilog2(rate); } static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, -- cgit v1.2.3-58-ga151 From 2cb90ed3de1e279dbaf23df141f54eb9fb1861e6 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Nov 2017 18:58:14 -0700 Subject: rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate This is a little more efficient, and avoids the warning WARNING: possible circular locking dependency detected 4.14.0-rc7-00007 #14 Not tainted ------------------------------------------------------ alsactl/330 is trying to acquire lock: (prepare_lock){+.+.}, at: [] clk_prepare_lock+0x80/0xf4 but task is already holding lock: (i2c_register_adapter){+.+.}, at: [] i2c_adapter_lock_bus+0x14/0x18 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (i2c_register_adapter){+.+.}: rt_mutex_lock+0x44/0x5c i2c_adapter_lock_bus+0x14/0x18 i2c_transfer+0xa8/0xbc i2c_smbus_xfer+0x20c/0x5d8 i2c_smbus_read_byte_data+0x38/0x48 m41t80_sqw_recalc_rate+0x24/0x58 Signed-off-by: Troy Kisky Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m41t80.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 42fc735a5446..f44dcf628c87 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -154,6 +154,7 @@ struct m41t80_data { struct rtc_device *rtc; #ifdef CONFIG_COMMON_CLK struct clk_hw sqw; + unsigned long freq; #endif }; @@ -443,26 +444,28 @@ static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume); #ifdef CONFIG_COMMON_CLK #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw) -static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long m41t80_decode_freq(int setting) +{ + return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ : + M41T80_SQW_MAX_FREQ >> setting; +} + +static unsigned long m41t80_get_freq(struct m41t80_data *m41t80) { - struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); struct i2c_client *client = m41t80->client; int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ? M41T80_REG_WDAY : M41T80_REG_SQW; int ret = i2c_smbus_read_byte_data(client, reg_sqw); - unsigned long val = M41T80_SQW_MAX_FREQ; if (ret < 0) return 0; + return m41t80_decode_freq(ret >> 4); +} - ret >>= 4; - if (ret == 0) - val = 0; - else if (ret > 1) - val = val / (1 << ret); - - return val; +static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return sqw_to_m41t80_data(hw)->freq; } static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate, @@ -505,6 +508,8 @@ static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, reg = (reg & 0x0f) | (val << 4); ret = i2c_smbus_write_byte_data(client, reg_sqw, reg); + if (!ret) + m41t80->freq = m41t80_decode_freq(val); return ret; } @@ -579,6 +584,7 @@ static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80) init.parent_names = NULL; init.num_parents = 0; m41t80->sqw.init = &init; + m41t80->freq = m41t80_get_freq(m41t80); /* optional override of the clockname */ of_property_read_string(node, "clock-output-names", &init.name); -- cgit v1.2.3-58-ga151 From 13bb1d78f2e372ec0d9b30489ac63768240140fc Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Nov 2017 18:58:15 -0700 Subject: rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared This is a little more efficient and avoids the warning WARNING: possible circular locking dependency detected 4.14.0-rc7-00010 #16 Not tainted ------------------------------------------------------ kworker/2:1/70 is trying to acquire lock: (prepare_lock){+.+.}, at: [] clk_prepare_lock+0x80/0xf4 but task is already holding lock: (i2c_register_adapter){+.+.}, at: [] i2c_adapter_lock_bus+0x14/0x18 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (i2c_register_adapter){+.+.}: rt_mutex_lock+0x44/0x5c i2c_adapter_lock_bus+0x14/0x18 i2c_transfer+0xa8/0xbc i2c_smbus_xfer+0x20c/0x5d8 i2c_smbus_read_byte_data+0x38/0x48 m41t80_sqw_is_prepared+0x18/0x28 Signed-off-by: Troy Kisky Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m41t80.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index f44dcf628c87..96a606d5f6e6 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -155,6 +155,7 @@ struct m41t80_data { #ifdef CONFIG_COMMON_CLK struct clk_hw sqw; unsigned long freq; + unsigned int sqwe; #endif }; @@ -527,7 +528,10 @@ static int m41t80_sqw_control(struct clk_hw *hw, bool enable) else ret &= ~M41T80_ALMON_SQWE; - return i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret); + ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret); + if (!ret) + m41t80->sqwe = enable; + return ret; } static int m41t80_sqw_prepare(struct clk_hw *hw) @@ -542,14 +546,7 @@ static void m41t80_sqw_unprepare(struct clk_hw *hw) static int m41t80_sqw_is_prepared(struct clk_hw *hw) { - struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); - struct i2c_client *client = m41t80->client; - int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); - - if (ret < 0) - return ret; - - return !!(ret & M41T80_ALMON_SQWE); + return sqw_to_m41t80_data(hw)->sqwe; } static const struct clk_ops m41t80_sqw_ops = { -- cgit v1.2.3-58-ga151 From 05a03bf260e0480bfc0db91b1fdbc2115e3f193b Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Nov 2017 18:58:16 -0700 Subject: rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate m41t80_sqw_set_rate will be called with the result from m41t80_sqw_round_rate, so might as well make m41t80_sqw_set_rate(n) same as m41t80_sqw_set_rate(m41t80_sqw_round_rate(n)) As Russell King wrote[1], "clk_round_rate() is supposed to tell you what you end up with if you ask clk_set_rate() to set the exact same value you passed in - but clk_round_rate() won't modify the hardware." [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2012-January/080175.html Signed-off-by: Troy Kisky Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-m41t80.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index 96a606d5f6e6..c90fba3ed861 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -490,17 +490,12 @@ static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, M41T80_REG_WDAY : M41T80_REG_SQW; int reg, ret, val = 0; - if (rate) { - if (!is_power_of_2(rate)) - return -EINVAL; - val = ilog2(rate); - if (val == ilog2(M41T80_SQW_MAX_FREQ)) - val = 1; - else if (val < (ilog2(M41T80_SQW_MAX_FREQ) - 1)) - val = ilog2(M41T80_SQW_MAX_FREQ) - val; - else - return -EINVAL; - } + if (rate >= M41T80_SQW_MAX_FREQ) + val = 1; + else if (rate >= M41T80_SQW_MAX_FREQ / 4) + val = 2; + else if (rate) + val = 15 - ilog2(rate); reg = i2c_smbus_read_byte_data(client, reg_sqw); if (reg < 0) -- cgit v1.2.3-58-ga151 From e0b6576fcd01b7dea606312d36b91ed0c047673b Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Fri, 3 Nov 2017 13:32:39 -0400 Subject: rtc: rx8010: Remove duplicate define Remove duplicate define for RX8010_YEAR Signed-off-by: Akshay Bhat Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rx8010.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index 1ed3403ff8ac..f948f7547806 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -24,7 +24,6 @@ #define RX8010_MDAY 0x14 #define RX8010_MONTH 0x15 #define RX8010_YEAR 0x16 -#define RX8010_YEAR 0x16 #define RX8010_RESV17 0x17 #define RX8010_ALMIN 0x18 #define RX8010_ALHOUR 0x19 -- cgit v1.2.3-58-ga151 From abf57f73ef0f88f215d35c1418bba0ab7bdee710 Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Fri, 3 Nov 2017 13:32:40 -0400 Subject: rtc: rx8010: Specify correct address for RX8010_RESV31 Define for reserved register 31 had the incorrect address. Specify the correct address. Reported-by: Jens-Peter Oswald Signed-off-by: Akshay Bhat Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rx8010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index f948f7547806..2e06e5fc4a16 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -35,7 +35,7 @@ #define RX8010_CTRL 0x1F /* 0x20 to 0x2F are user registers */ #define RX8010_RESV30 0x30 -#define RX8010_RESV31 0x32 +#define RX8010_RESV31 0x31 #define RX8010_IRQ 0x32 #define RX8010_EXT_WADA BIT(3) -- cgit v1.2.3-58-ga151 From 804a6cfeb5c9e1caae86b345a5a8a50f77ddccc4 Mon Sep 17 00:00:00 2001 From: Akshay Bhat Date: Wed, 8 Nov 2017 14:58:14 -0500 Subject: rtc: rx8010: Fix for incorrect return value The err variable is not being reset after a successful read. Explicitly return 0 at the end of function call to account for all return paths. Reported-by: Jens-Peter Oswald Signed-off-by: Akshay Bhat Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-rx8010.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-rx8010.c b/drivers/rtc/rtc-rx8010.c index 2e06e5fc4a16..5c5938ab3d86 100644 --- a/drivers/rtc/rtc-rx8010.c +++ b/drivers/rtc/rtc-rx8010.c @@ -247,7 +247,7 @@ static int rx8010_init_client(struct i2c_client *client) rx8010->ctrlreg = (ctrl[1] & ~RX8010_CTRL_TEST); - return err; + return 0; } static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t) @@ -276,7 +276,7 @@ static int rx8010_read_alarm(struct device *dev, struct rtc_wkalrm *t) t->enabled = !!(rx8010->ctrlreg & RX8010_CTRL_AIE); t->pending = (flagreg & RX8010_FLAG_AF) && t->enabled; - return err; + return 0; } static int rx8010_set_alarm(struct device *dev, struct rtc_wkalrm *t) -- cgit v1.2.3-58-ga151 From a3350f9c57ffad569c40f7320b89da1f3061c5bb Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 7 Nov 2017 13:12:17 +0100 Subject: rtc: pcf8563: fix output clock rate The pcf8563_clkout_recalc_rate function erroneously ignores the frequency index read from the CLKO register and always returns 32768 Hz. Fixes: a39a6405d5f9 ("rtc: pcf8563: add CLKOUT to common clock framework") Signed-off-by: Philipp Zabel Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf8563.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index cea6ea4df970..8c836c51a508 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -422,7 +422,7 @@ static unsigned long pcf8563_clkout_recalc_rate(struct clk_hw *hw, return 0; buf &= PCF8563_REG_CLKO_F_MASK; - return clkout_rates[ret]; + return clkout_rates[buf]; } static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate, -- cgit v1.2.3-58-ga151 From 1856e0b2ace70a0231a94ec9d1286904c6ffa1ca Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Wed, 8 Nov 2017 05:27:45 +0100 Subject: rtc: pcf8563: don't alway enable the alarm Allow setting the alarm and later enable it instead of enabling it unconditionally. Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-pcf8563.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf8563.c b/drivers/rtc/rtc-pcf8563.c index 8c836c51a508..3efc86c25d27 100644 --- a/drivers/rtc/rtc-pcf8563.c +++ b/drivers/rtc/rtc-pcf8563.c @@ -387,7 +387,7 @@ static int pcf8563_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm) if (err) return err; - return pcf8563_set_alarm_mode(client, 1); + return pcf8563_set_alarm_mode(client, !!tm->enabled); } static int pcf8563_irq_enable(struct device *dev, unsigned int enabled) -- cgit v1.2.3-58-ga151 From d0bcd82b13794c4bc89876e9383000fc1cb069d2 Mon Sep 17 00:00:00 2001 From: Loc Ho Date: Mon, 14 Apr 2014 12:09:04 -0600 Subject: rtc: xgene: Fix suspend/resume This patch fixes suspend/resume functions properly for the APM X-Gene SoC RTC driver. Signed-off-by: Loc Ho Reviewed-by: Mark Brown Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-xgene.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-) diff --git a/drivers/rtc/rtc-xgene.c b/drivers/rtc/rtc-xgene.c index 65b432a096fe..360eae24a8c8 100644 --- a/drivers/rtc/rtc-xgene.c +++ b/drivers/rtc/rtc-xgene.c @@ -52,6 +52,7 @@ struct xgene_rtc_dev { void __iomem *csr_base; struct clk *clk; unsigned int irq_wake; + unsigned int irq_enabled; }; static int xgene_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -104,15 +105,19 @@ static int xgene_rtc_alarm_irq_enable(struct device *dev, u32 enabled) return 0; } +static int xgene_rtc_alarm_irq_enabled(struct device *dev) +{ + struct xgene_rtc_dev *pdata = dev_get_drvdata(dev); + + return readl(pdata->csr_base + RTC_CCR) & RTC_CCR_IE ? 1 : 0; +} + static int xgene_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { struct xgene_rtc_dev *pdata = dev_get_drvdata(dev); - unsigned long rtc_time; unsigned long alarm_time; - rtc_time = readl(pdata->csr_base + RTC_CCVR); rtc_tm_to_time(&alrm->time, &alarm_time); - pdata->alarm_time = alarm_time; writel((u32) pdata->alarm_time, pdata->csr_base + RTC_CMR); @@ -180,12 +185,18 @@ static int xgene_rtc_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Couldn't get the clock for RTC\n"); return -ENODEV; } - clk_prepare_enable(pdata->clk); + ret = clk_prepare_enable(pdata->clk); + if (ret) + return ret; /* Turn on the clock and the crystal */ writel(RTC_CCR_EN, pdata->csr_base + RTC_CCR); - device_init_wakeup(&pdev->dev, 1); + ret = device_init_wakeup(&pdev->dev, 1); + if (ret) { + clk_disable_unprepare(pdata->clk); + return ret; + } pdata->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &xgene_rtc_ops, THIS_MODULE); @@ -218,14 +229,20 @@ static int xgene_rtc_suspend(struct device *dev) int irq; irq = platform_get_irq(pdev, 0); + + /* + * If this RTC alarm will be used for waking the system up, + * don't disable it of course. Else we just disable the alarm + * and await suspension. + */ if (device_may_wakeup(&pdev->dev)) { if (!enable_irq_wake(irq)) pdata->irq_wake = 1; } else { + pdata->irq_enabled = xgene_rtc_alarm_irq_enabled(dev); xgene_rtc_alarm_irq_enable(dev, 0); - clk_disable(pdata->clk); + clk_disable_unprepare(pdata->clk); } - return 0; } @@ -234,16 +251,22 @@ static int xgene_rtc_resume(struct device *dev) struct platform_device *pdev = to_platform_device(dev); struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev); int irq; + int rc; irq = platform_get_irq(pdev, 0); + if (device_may_wakeup(&pdev->dev)) { if (pdata->irq_wake) { disable_irq_wake(irq); pdata->irq_wake = 0; } } else { - clk_enable(pdata->clk); - xgene_rtc_alarm_irq_enable(dev, 1); + rc = clk_prepare_enable(pdata->clk); + if (rc) { + dev_err(dev, "Unable to enable clock error %d\n", rc); + return rc; + } + xgene_rtc_alarm_irq_enable(dev, pdata->irq_enabled); } return 0; -- cgit v1.2.3-58-ga151 From 573e2bf05421d0dc69dc3c604f286b3473d2f2cd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 8 Nov 2017 13:08:10 +0100 Subject: rtc: xgene: mark PM functions as __maybe_unused The new xgene_rtc_alarm_irq_enabled() function is only accessed from PM code, which is inside of an #ifdef; this causes a harmless build warning when CONFIG_PM is disabled: drivers/rtc/rtc-xgene.c:108:12: error: 'xgene_rtc_alarm_irq_enabled' defined but not used [-Werror=unused-function] Just remove the #ifdef and use __maybe_unused annotations instead, to make the code more robust here. Fixes: d0bcd82b1379 ("rtc: xgene: Fix suspend/resume") Signed-off-by: Arnd Bergmann Reviewed-by: Loc Ho Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-xgene.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-xgene.c b/drivers/rtc/rtc-xgene.c index 360eae24a8c8..0c34d3b81279 100644 --- a/drivers/rtc/rtc-xgene.c +++ b/drivers/rtc/rtc-xgene.c @@ -221,8 +221,7 @@ static int xgene_rtc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP -static int xgene_rtc_suspend(struct device *dev) +static int __maybe_unused xgene_rtc_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev); @@ -246,7 +245,7 @@ static int xgene_rtc_suspend(struct device *dev) return 0; } -static int xgene_rtc_resume(struct device *dev) +static int __maybe_unused xgene_rtc_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct xgene_rtc_dev *pdata = platform_get_drvdata(pdev); @@ -271,7 +270,6 @@ static int xgene_rtc_resume(struct device *dev) return 0; } -#endif static SIMPLE_DEV_PM_OPS(xgene_rtc_pm_ops, xgene_rtc_suspend, xgene_rtc_resume); -- cgit v1.2.3-58-ga151 From 9a06da2ecc92a81e969bd8c3768f63b63cb02e80 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 9 Nov 2017 15:09:20 +0800 Subject: rtc: sysfs: Use time64_t variables to set time/alarm Use time64_t variables and related APIs for sysfs interfaces to support setting time or alarm after the year 2038 on 32-bit system. Signed-off-by: Baolin Wang Reviewed-by: Arnd Bergmann Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-sysfs.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c index e364550eb9a7..92ff2edb86a6 100644 --- a/drivers/rtc/rtc-sysfs.c +++ b/drivers/rtc/rtc-sysfs.c @@ -72,9 +72,10 @@ since_epoch_show(struct device *dev, struct device_attribute *attr, char *buf) retval = rtc_read_time(to_rtc_device(dev), &tm); if (retval == 0) { - unsigned long time; - rtc_tm_to_time(&tm, &time); - retval = sprintf(buf, "%lu\n", time); + time64_t time; + + time = rtc_tm_to_time64(&tm); + retval = sprintf(buf, "%lld\n", time); } return retval; @@ -132,7 +133,7 @@ static ssize_t wakealarm_show(struct device *dev, struct device_attribute *attr, char *buf) { ssize_t retval; - unsigned long alarm; + time64_t alarm; struct rtc_wkalrm alm; /* Don't show disabled alarms. For uniformity, RTC alarms are @@ -145,8 +146,8 @@ wakealarm_show(struct device *dev, struct device_attribute *attr, char *buf) */ retval = rtc_read_alarm(to_rtc_device(dev), &alm); if (retval == 0 && alm.enabled) { - rtc_tm_to_time(&alm.time, &alarm); - retval = sprintf(buf, "%lu\n", alarm); + alarm = rtc_tm_to_time64(&alm.time); + retval = sprintf(buf, "%lld\n", alarm); } return retval; @@ -157,8 +158,8 @@ wakealarm_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { ssize_t retval; - unsigned long now, alarm; - unsigned long push = 0; + time64_t now, alarm; + time64_t push = 0; struct rtc_wkalrm alm; struct rtc_device *rtc = to_rtc_device(dev); const char *buf_ptr; @@ -170,7 +171,7 @@ wakealarm_store(struct device *dev, struct device_attribute *attr, retval = rtc_read_time(rtc, &alm.time); if (retval < 0) return retval; - rtc_tm_to_time(&alm.time, &now); + now = rtc_tm_to_time64(&alm.time); buf_ptr = buf; if (*buf_ptr == '+') { @@ -181,7 +182,7 @@ wakealarm_store(struct device *dev, struct device_attribute *attr, } else adjust = 1; } - retval = kstrtoul(buf_ptr, 0, &alarm); + retval = kstrtos64(buf_ptr, 0, &alarm); if (retval) return retval; if (adjust) { @@ -197,7 +198,7 @@ wakealarm_store(struct device *dev, struct device_attribute *attr, return retval; if (alm.enabled) { if (push) { - rtc_tm_to_time(&alm.time, &push); + push = rtc_tm_to_time64(&alm.time); alarm += push; } else return -EBUSY; @@ -212,7 +213,7 @@ wakealarm_store(struct device *dev, struct device_attribute *attr, */ alarm = now + 300; } - rtc_time_to_tm(alarm, &alm.time); + rtc_time64_to_tm(alarm, &alm.time); retval = rtc_set_alarm(rtc, &alm); return (retval < 0) ? retval : n; -- cgit v1.2.3-58-ga151 From 275ebe2b8fcab4ba4a774e6ee1e3e28d495cff3e Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 10 Nov 2017 09:59:30 +0100 Subject: rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm Calculating yday in the read_alarm callback is useless as this value is never used later. Also, it was buggy anyway because at the time this is done, tm_year is always 0 as the alarm register doesn't hold the year. Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-at91rm9200.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index e221b78b6f10..e84f5ec4faf6 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -208,7 +208,6 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) struct rtc_time *tm = &alrm->time; at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm); - tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year); tm->tm_year = at91_alarm_year - 1900; alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) -- cgit v1.2.3-58-ga151 From eaa1dc7ba18db14842fbee9c57e71d28ae1c407d Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 10 Nov 2017 09:59:31 +0100 Subject: rtc: at91rm9200: fix reading alarm value When alarm value is read at boot time, at91_alarm_year is not yet set to the proper value so the year is always set to 1900. This results in that kind of message at boot: rtc rtc0: invalid alarm value: 1900-1-14 2:11:39 There is no way to recover from that as the alarm is now only read when booting. Instead, rely on the rtc core to figure out the proper year. Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-at91rm9200.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index e84f5ec4faf6..de81ecedd571 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -42,8 +42,6 @@ #define at91_rtc_write(field, val) \ writel_relaxed((val), at91_rtc_regs + field) -#define AT91_RTC_EPOCH 1900UL /* just like arch/arm/common/rtctime.c */ - struct at91_rtc_config { bool use_shadow_imr; }; @@ -51,7 +49,6 @@ struct at91_rtc_config { static const struct at91_rtc_config *at91_rtc_config; static DECLARE_COMPLETION(at91_rtc_updated); static DECLARE_COMPLETION(at91_rtc_upd_rdy); -static unsigned int at91_alarm_year = AT91_RTC_EPOCH; static void __iomem *at91_rtc_regs; static int irq; static DEFINE_SPINLOCK(at91_rtc_lock); @@ -131,8 +128,7 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg, /* * The Calendar Alarm register does not have a field for - * the year - so these will return an invalid value. When an - * alarm is set, at91_alarm_year will store the current year. + * the year - so these will return an invalid value. */ tm->tm_year = bcd2bin(date & AT91_RTC_CENT) * 100; /* century */ tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8); /* year */ @@ -208,14 +204,14 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) struct rtc_time *tm = &alrm->time; at91_rtc_decodetime(AT91_RTC_TIMALR, AT91_RTC_CALALR, tm); - tm->tm_year = at91_alarm_year - 1900; + tm->tm_year = -1; alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM) ? 1 : 0; - dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, - 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, - tm->tm_hour, tm->tm_min, tm->tm_sec); + dev_dbg(dev, "%s(): %02d-%02d %02d:%02d:%02d %sabled\n", __func__, + tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec, + alrm->enabled ? "en" : "dis"); return 0; } @@ -229,8 +225,6 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) at91_rtc_decodetime(AT91_RTC_TIMR, AT91_RTC_CALR, &tm); - at91_alarm_year = tm.tm_year; - tm.tm_mon = alrm->time.tm_mon; tm.tm_mday = alrm->time.tm_mday; tm.tm_hour = alrm->time.tm_hour; @@ -254,7 +248,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) } dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__, - at91_alarm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, + tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); return 0; -- cgit v1.2.3-58-ga151 From 8f6596f4c94a155b93a809989314e5e8c01d0618 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 9 Nov 2017 11:34:16 +0800 Subject: dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation This patch adds the binding documentation for Spreadtrum SC27xx series RTC device. Signed-off-by: Baolin Wang Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- .../devicetree/bindings/rtc/sprd,sc27xx-rtc.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt diff --git a/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt new file mode 100644 index 000000000000..7c170da0d4b7 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt @@ -0,0 +1,27 @@ +Spreadtrum SC27xx Real Time Clock + +Required properties: +- compatible: should be "sprd,sc2731-rtc". +- reg: address offset of rtc register. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. + +Example: + + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; -- cgit v1.2.3-58-ga151 From 495bbde523969c596bcfb8285a6027c746a18ef4 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 9 Nov 2017 11:34:17 +0800 Subject: rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver This patch adds the Spreadtrum RTC driver, which embedded in the Spreadtrum SC27xx series PMICs. Signed-off-by: Baolin Wang Signed-off-by: Alexandre Belloni --- drivers/rtc/Kconfig | 11 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-sc27xx.c | 662 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 674 insertions(+) create mode 100644 drivers/rtc/rtc-sc27xx.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 47663e03f9a8..b59a31b079a5 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1187,6 +1187,17 @@ config RTC_DRV_WM8350 This driver can also be built as a module. If so, the module will be called "rtc-wm8350". +config RTC_DRV_SC27XX + tristate "Spreadtrum SC27xx RTC" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + help + If you say Y here you will get support for the RTC subsystem + of the Spreadtrum SC27xx series PMICs. The SC27xx series PMICs + includes the SC2720, SC2721, SC2723, SC2730 and SC2731 chips. + + This driver can also be built as a module. If so, the module + will be called rtc-sc27xx. + config RTC_DRV_SPEAR tristate "SPEAR ST RTC" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 0b5acd6b5cc3..5cf6b0a44f01 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -145,6 +145,7 @@ obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_S5M) += rtc-s5m.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o +obj-$(CONFIG_RTC_DRV_SC27XX) += rtc-sc27xx.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_SIRFSOC) += rtc-sirfsoc.o obj-$(CONFIG_RTC_DRV_SNVS) += rtc-snvs.o diff --git a/drivers/rtc/rtc-sc27xx.c b/drivers/rtc/rtc-sc27xx.c new file mode 100644 index 000000000000..d544d5268757 --- /dev/null +++ b/drivers/rtc/rtc-sc27xx.c @@ -0,0 +1,662 @@ +/* + * Copyright (C) 2017 Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define SPRD_RTC_SEC_CNT_VALUE 0x0 +#define SPRD_RTC_MIN_CNT_VALUE 0x4 +#define SPRD_RTC_HOUR_CNT_VALUE 0x8 +#define SPRD_RTC_DAY_CNT_VALUE 0xc +#define SPRD_RTC_SEC_CNT_UPD 0x10 +#define SPRD_RTC_MIN_CNT_UPD 0x14 +#define SPRD_RTC_HOUR_CNT_UPD 0x18 +#define SPRD_RTC_DAY_CNT_UPD 0x1c +#define SPRD_RTC_SEC_ALM_UPD 0x20 +#define SPRD_RTC_MIN_ALM_UPD 0x24 +#define SPRD_RTC_HOUR_ALM_UPD 0x28 +#define SPRD_RTC_DAY_ALM_UPD 0x2c +#define SPRD_RTC_INT_EN 0x30 +#define SPRD_RTC_INT_RAW_STS 0x34 +#define SPRD_RTC_INT_CLR 0x38 +#define SPRD_RTC_INT_MASK_STS 0x3C +#define SPRD_RTC_SEC_ALM_VALUE 0x40 +#define SPRD_RTC_MIN_ALM_VALUE 0x44 +#define SPRD_RTC_HOUR_ALM_VALUE 0x48 +#define SPRD_RTC_DAY_ALM_VALUE 0x4c +#define SPRD_RTC_SPG_VALUE 0x50 +#define SPRD_RTC_SPG_UPD 0x54 +#define SPRD_RTC_SEC_AUXALM_UPD 0x60 +#define SPRD_RTC_MIN_AUXALM_UPD 0x64 +#define SPRD_RTC_HOUR_AUXALM_UPD 0x68 +#define SPRD_RTC_DAY_AUXALM_UPD 0x6c + +/* BIT & MASK definition for SPRD_RTC_INT_* registers */ +#define SPRD_RTC_SEC_EN BIT(0) +#define SPRD_RTC_MIN_EN BIT(1) +#define SPRD_RTC_HOUR_EN BIT(2) +#define SPRD_RTC_DAY_EN BIT(3) +#define SPRD_RTC_ALARM_EN BIT(4) +#define SPRD_RTC_HRS_FORMAT_EN BIT(5) +#define SPRD_RTC_AUXALM_EN BIT(6) +#define SPRD_RTC_SPG_UPD_EN BIT(7) +#define SPRD_RTC_SEC_UPD_EN BIT(8) +#define SPRD_RTC_MIN_UPD_EN BIT(9) +#define SPRD_RTC_HOUR_UPD_EN BIT(10) +#define SPRD_RTC_DAY_UPD_EN BIT(11) +#define SPRD_RTC_ALMSEC_UPD_EN BIT(12) +#define SPRD_RTC_ALMMIN_UPD_EN BIT(13) +#define SPRD_RTC_ALMHOUR_UPD_EN BIT(14) +#define SPRD_RTC_ALMDAY_UPD_EN BIT(15) +#define SPRD_RTC_INT_MASK GENMASK(15, 0) + +#define SPRD_RTC_TIME_INT_MASK \ + (SPRD_RTC_SEC_UPD_EN | SPRD_RTC_MIN_UPD_EN | \ + SPRD_RTC_HOUR_UPD_EN | SPRD_RTC_DAY_UPD_EN) + +#define SPRD_RTC_ALMTIME_INT_MASK \ + (SPRD_RTC_ALMSEC_UPD_EN | SPRD_RTC_ALMMIN_UPD_EN | \ + SPRD_RTC_ALMHOUR_UPD_EN | SPRD_RTC_ALMDAY_UPD_EN) + +#define SPRD_RTC_ALM_INT_MASK \ + (SPRD_RTC_SEC_EN | SPRD_RTC_MIN_EN | \ + SPRD_RTC_HOUR_EN | SPRD_RTC_DAY_EN | \ + SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN) + +/* second/minute/hour/day values mask definition */ +#define SPRD_RTC_SEC_MASK GENMASK(5, 0) +#define SPRD_RTC_MIN_MASK GENMASK(5, 0) +#define SPRD_RTC_HOUR_MASK GENMASK(4, 0) +#define SPRD_RTC_DAY_MASK GENMASK(15, 0) + +/* alarm lock definition for SPRD_RTC_SPG_UPD register */ +#define SPRD_RTC_ALMLOCK_MASK GENMASK(7, 0) +#define SPRD_RTC_ALM_UNLOCK 0xa5 +#define SPRD_RTC_ALM_LOCK (~SPRD_RTC_ALM_UNLOCK & \ + SPRD_RTC_ALMLOCK_MASK) + +/* SPG values definition for SPRD_RTC_SPG_UPD register */ +#define SPRD_RTC_POWEROFF_ALM_FLAG BIT(8) +#define SPRD_RTC_POWER_RESET_FLAG BIT(9) + +/* timeout of synchronizing time and alarm registers (us) */ +#define SPRD_RTC_POLL_TIMEOUT 200000 +#define SPRD_RTC_POLL_DELAY_US 20000 + +struct sprd_rtc { + struct rtc_device *rtc; + struct regmap *regmap; + struct device *dev; + u32 base; + int irq; + bool valid; +}; + +/* + * The Spreadtrum RTC controller has 3 groups registers, including time, normal + * alarm and auxiliary alarm. The time group registers are used to set RTC time, + * the normal alarm registers are used to set normal alarm, and the auxiliary + * alarm registers are used to set auxiliary alarm. Both alarm event and + * auxiliary alarm event can wake up system from deep sleep, but only alarm + * event can power up system from power down status. + */ +enum sprd_rtc_reg_types { + SPRD_RTC_TIME, + SPRD_RTC_ALARM, + SPRD_RTC_AUX_ALARM, +}; + +static int sprd_rtc_clear_alarm_ints(struct sprd_rtc *rtc) +{ + return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, + SPRD_RTC_ALM_INT_MASK); +} + +static int sprd_rtc_disable_ints(struct sprd_rtc *rtc) +{ + int ret; + + ret = regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_INT_MASK, 0); + if (ret) + return ret; + + return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, + SPRD_RTC_INT_MASK); +} + +static int sprd_rtc_lock_alarm(struct sprd_rtc *rtc, bool lock) +{ + int ret; + u32 val; + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val); + if (ret) + return ret; + + val &= ~(SPRD_RTC_ALMLOCK_MASK | SPRD_RTC_POWEROFF_ALM_FLAG); + if (lock) + val |= SPRD_RTC_ALM_LOCK; + else + val |= SPRD_RTC_ALM_UNLOCK | SPRD_RTC_POWEROFF_ALM_FLAG; + + ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_SPG_UPD, val); + if (ret) + return ret; + + /* wait until the SPG value is updated successfully */ + ret = regmap_read_poll_timeout(rtc->regmap, + rtc->base + SPRD_RTC_INT_RAW_STS, val, + (val & SPRD_RTC_SPG_UPD_EN), + SPRD_RTC_POLL_DELAY_US, + SPRD_RTC_POLL_TIMEOUT); + if (ret) { + dev_err(rtc->dev, "failed to update SPG value:%d\n", ret); + return ret; + } + + return 0; +} + +static int sprd_rtc_get_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type, + time64_t *secs) +{ + u32 sec_reg, min_reg, hour_reg, day_reg; + u32 val, sec, min, hour, day; + int ret; + + switch (type) { + case SPRD_RTC_TIME: + sec_reg = SPRD_RTC_SEC_CNT_VALUE; + min_reg = SPRD_RTC_MIN_CNT_VALUE; + hour_reg = SPRD_RTC_HOUR_CNT_VALUE; + day_reg = SPRD_RTC_DAY_CNT_VALUE; + break; + case SPRD_RTC_ALARM: + sec_reg = SPRD_RTC_SEC_ALM_VALUE; + min_reg = SPRD_RTC_MIN_ALM_VALUE; + hour_reg = SPRD_RTC_HOUR_ALM_VALUE; + day_reg = SPRD_RTC_DAY_ALM_VALUE; + break; + case SPRD_RTC_AUX_ALARM: + sec_reg = SPRD_RTC_SEC_AUXALM_UPD; + min_reg = SPRD_RTC_MIN_AUXALM_UPD; + hour_reg = SPRD_RTC_HOUR_AUXALM_UPD; + day_reg = SPRD_RTC_DAY_AUXALM_UPD; + break; + default: + return -EINVAL; + } + + ret = regmap_read(rtc->regmap, rtc->base + sec_reg, &val); + if (ret) + return ret; + + sec = val & SPRD_RTC_SEC_MASK; + + ret = regmap_read(rtc->regmap, rtc->base + min_reg, &val); + if (ret) + return ret; + + min = val & SPRD_RTC_MIN_MASK; + + ret = regmap_read(rtc->regmap, rtc->base + hour_reg, &val); + if (ret) + return ret; + + hour = val & SPRD_RTC_HOUR_MASK; + + ret = regmap_read(rtc->regmap, rtc->base + day_reg, &val); + if (ret) + return ret; + + day = val & SPRD_RTC_DAY_MASK; + *secs = (((time64_t)(day * 24) + hour) * 60 + min) * 60 + sec; + return 0; +} + +static int sprd_rtc_set_secs(struct sprd_rtc *rtc, enum sprd_rtc_reg_types type, + time64_t secs) +{ + u32 sec_reg, min_reg, hour_reg, day_reg, sts_mask; + u32 sec, min, hour, day, val; + int ret, rem; + + /* convert seconds to RTC time format */ + day = div_s64_rem(secs, 86400, &rem); + hour = rem / 3600; + rem -= hour * 3600; + min = rem / 60; + sec = rem - min * 60; + + switch (type) { + case SPRD_RTC_TIME: + sec_reg = SPRD_RTC_SEC_CNT_UPD; + min_reg = SPRD_RTC_MIN_CNT_UPD; + hour_reg = SPRD_RTC_HOUR_CNT_UPD; + day_reg = SPRD_RTC_DAY_CNT_UPD; + sts_mask = SPRD_RTC_TIME_INT_MASK; + break; + case SPRD_RTC_ALARM: + sec_reg = SPRD_RTC_SEC_ALM_UPD; + min_reg = SPRD_RTC_MIN_ALM_UPD; + hour_reg = SPRD_RTC_HOUR_ALM_UPD; + day_reg = SPRD_RTC_DAY_ALM_UPD; + sts_mask = SPRD_RTC_ALMTIME_INT_MASK; + break; + case SPRD_RTC_AUX_ALARM: + sec_reg = SPRD_RTC_SEC_AUXALM_UPD; + min_reg = SPRD_RTC_MIN_AUXALM_UPD; + hour_reg = SPRD_RTC_HOUR_AUXALM_UPD; + day_reg = SPRD_RTC_DAY_AUXALM_UPD; + sts_mask = 0; + break; + default: + return -EINVAL; + } + + ret = regmap_write(rtc->regmap, rtc->base + sec_reg, sec); + if (ret) + return ret; + + ret = regmap_write(rtc->regmap, rtc->base + min_reg, min); + if (ret) + return ret; + + ret = regmap_write(rtc->regmap, rtc->base + hour_reg, hour); + if (ret) + return ret; + + ret = regmap_write(rtc->regmap, rtc->base + day_reg, day); + if (ret) + return ret; + + if (type == SPRD_RTC_AUX_ALARM) + return 0; + + /* + * Since the time and normal alarm registers are put in always-power-on + * region supplied by VDDRTC, then these registers changing time will + * be very long, about 125ms. Thus here we should wait until all + * values are updated successfully. + */ + ret = regmap_read_poll_timeout(rtc->regmap, + rtc->base + SPRD_RTC_INT_RAW_STS, val, + ((val & sts_mask) == sts_mask), + SPRD_RTC_POLL_DELAY_US, + SPRD_RTC_POLL_TIMEOUT); + if (ret < 0) { + dev_err(rtc->dev, "set time/alarm values timeout\n"); + return ret; + } + + return regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, + sts_mask); +} + +static int sprd_rtc_read_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs; + u32 val; + int ret; + + ret = sprd_rtc_get_secs(rtc, SPRD_RTC_AUX_ALARM, &secs); + if (ret) + return ret; + + rtc_time64_to_tm(secs, &alrm->time); + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val); + if (ret) + return ret; + + alrm->enabled = !!(val & SPRD_RTC_AUXALM_EN); + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val); + if (ret) + return ret; + + alrm->pending = !!(val & SPRD_RTC_AUXALM_EN); + return 0; +} + +static int sprd_rtc_set_aux_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs = rtc_tm_to_time64(&alrm->time); + int ret; + + /* clear the auxiliary alarm interrupt status */ + ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, + SPRD_RTC_AUXALM_EN); + if (ret) + return ret; + + ret = sprd_rtc_set_secs(rtc, SPRD_RTC_AUX_ALARM, secs); + if (ret) + return ret; + + if (alrm->enabled) { + ret = regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_AUXALM_EN, + SPRD_RTC_AUXALM_EN); + } else { + ret = regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_AUXALM_EN, 0); + } + + return ret; +} + +static int sprd_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs; + int ret; + + if (!rtc->valid) { + dev_warn(dev, "RTC values are invalid\n"); + return -EINVAL; + } + + ret = sprd_rtc_get_secs(rtc, SPRD_RTC_TIME, &secs); + if (ret) + return ret; + + rtc_time64_to_tm(secs, tm); + return rtc_valid_tm(tm); +} + +static int sprd_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs = rtc_tm_to_time64(tm); + u32 val; + int ret; + + ret = sprd_rtc_set_secs(rtc, SPRD_RTC_TIME, secs); + if (ret) + return ret; + + if (!rtc->valid) { + /* + * Set SPRD_RTC_POWER_RESET_FLAG to indicate now RTC has valid + * time values. + */ + ret = regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_SPG_UPD, + SPRD_RTC_POWER_RESET_FLAG, + SPRD_RTC_POWER_RESET_FLAG); + if (ret) + return ret; + + ret = regmap_read_poll_timeout(rtc->regmap, + rtc->base + SPRD_RTC_INT_RAW_STS, + val, (val & SPRD_RTC_SPG_UPD_EN), + SPRD_RTC_POLL_DELAY_US, + SPRD_RTC_POLL_TIMEOUT); + if (ret) { + dev_err(rtc->dev, "failed to update SPG value:%d\n", + ret); + return ret; + } + + rtc->valid = true; + } + + return 0; +} + +static int sprd_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs; + int ret; + u32 val; + + /* + * If aie_timer is enabled, we should get the normal alarm time. + * Otherwise we should get auxiliary alarm time. + */ + if (rtc->rtc && rtc->rtc->aie_timer.enabled == 0) + return sprd_rtc_read_aux_alarm(dev, alrm); + + ret = sprd_rtc_get_secs(rtc, SPRD_RTC_ALARM, &secs); + if (ret) + return ret; + + rtc_time64_to_tm(secs, &alrm->time); + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, &val); + if (ret) + return ret; + + alrm->enabled = !!(val & SPRD_RTC_ALARM_EN); + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_INT_RAW_STS, &val); + if (ret) + return ret; + + alrm->pending = !!(val & SPRD_RTC_ALARM_EN); + return 0; +} + +static int sprd_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + time64_t secs = rtc_tm_to_time64(&alrm->time); + struct rtc_time aie_time = + rtc_ktime_to_tm(rtc->rtc->aie_timer.node.expires); + int ret; + + /* + * We have 2 groups alarms: normal alarm and auxiliary alarm. Since + * both normal alarm event and auxiliary alarm event can wake up system + * from deep sleep, but only alarm event can power up system from power + * down status. Moreover we do not need to poll about 125ms when + * updating auxiliary alarm registers. Thus we usually set auxiliary + * alarm when wake up system from deep sleep, and for other scenarios, + * we should set normal alarm with polling status. + * + * So here we check if the alarm time is set by aie_timer, if yes, we + * should set normal alarm, if not, we should set auxiliary alarm which + * means it is just a wake event. + */ + if (!rtc->rtc->aie_timer.enabled || rtc_tm_sub(&aie_time, &alrm->time)) + return sprd_rtc_set_aux_alarm(dev, alrm); + + /* clear the alarm interrupt status firstly */ + ret = regmap_write(rtc->regmap, rtc->base + SPRD_RTC_INT_CLR, + SPRD_RTC_ALARM_EN); + if (ret) + return ret; + + ret = sprd_rtc_set_secs(rtc, SPRD_RTC_ALARM, secs); + if (ret) + return ret; + + if (alrm->enabled) { + ret = regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_ALARM_EN, + SPRD_RTC_ALARM_EN); + if (ret) + return ret; + + /* unlock the alarm to enable the alarm function. */ + ret = sprd_rtc_lock_alarm(rtc, false); + } else { + regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_ALARM_EN, 0); + + /* + * Lock the alarm function in case fake alarm event will power + * up systems. + */ + ret = sprd_rtc_lock_alarm(rtc, true); + } + + return ret; +} + +static int sprd_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) +{ + struct sprd_rtc *rtc = dev_get_drvdata(dev); + int ret; + + if (enabled) { + ret = regmap_update_bits(rtc->regmap, + rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, + SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN); + if (ret) + return ret; + + ret = sprd_rtc_lock_alarm(rtc, false); + } else { + regmap_update_bits(rtc->regmap, rtc->base + SPRD_RTC_INT_EN, + SPRD_RTC_ALARM_EN | SPRD_RTC_AUXALM_EN, 0); + + ret = sprd_rtc_lock_alarm(rtc, true); + } + + return ret; +} + +static const struct rtc_class_ops sprd_rtc_ops = { + .read_time = sprd_rtc_read_time, + .set_time = sprd_rtc_set_time, + .read_alarm = sprd_rtc_read_alarm, + .set_alarm = sprd_rtc_set_alarm, + .alarm_irq_enable = sprd_rtc_alarm_irq_enable, +}; + +static irqreturn_t sprd_rtc_handler(int irq, void *dev_id) +{ + struct sprd_rtc *rtc = dev_id; + int ret; + + ret = sprd_rtc_clear_alarm_ints(rtc); + if (ret) + return IRQ_RETVAL(ret); + + rtc_update_irq(rtc->rtc, 1, RTC_AF | RTC_IRQF); + return IRQ_HANDLED; +} + +static int sprd_rtc_check_power_down(struct sprd_rtc *rtc) +{ + u32 val; + int ret; + + ret = regmap_read(rtc->regmap, rtc->base + SPRD_RTC_SPG_VALUE, &val); + if (ret) + return ret; + + /* + * If the SPRD_RTC_POWER_RESET_FLAG was not set, which means the RTC has + * been powered down, so the RTC time values are invalid. + */ + rtc->valid = (val & SPRD_RTC_POWER_RESET_FLAG) ? true : false; + return 0; +} + +static int sprd_rtc_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct sprd_rtc *rtc; + int ret; + + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); + if (!rtc) + return -ENOMEM; + + rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!rtc->regmap) + return -ENODEV; + + ret = of_property_read_u32(node, "reg", &rtc->base); + if (ret) { + dev_err(&pdev->dev, "failed to get RTC base address\n"); + return ret; + } + + rtc->irq = platform_get_irq(pdev, 0); + if (rtc->irq < 0) { + dev_err(&pdev->dev, "failed to get RTC irq number\n"); + return rtc->irq; + } + + rtc->dev = &pdev->dev; + platform_set_drvdata(pdev, rtc); + + /* clear all RTC interrupts and disable all RTC interrupts */ + ret = sprd_rtc_disable_ints(rtc); + if (ret) { + dev_err(&pdev->dev, "failed to disable RTC interrupts\n"); + return ret; + } + + /* check if RTC time values are valid */ + ret = sprd_rtc_check_power_down(rtc); + if (ret) { + dev_err(&pdev->dev, "failed to check RTC time values\n"); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL, + sprd_rtc_handler, + IRQF_ONESHOT | IRQF_EARLY_RESUME, + pdev->name, rtc); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request RTC irq\n"); + return ret; + } + + rtc->rtc = devm_rtc_device_register(&pdev->dev, pdev->name, + &sprd_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc->rtc)) + return PTR_ERR(rtc->rtc); + + device_init_wakeup(&pdev->dev, 1); + return 0; +} + +static int sprd_rtc_remove(struct platform_device *pdev) +{ + device_init_wakeup(&pdev->dev, 0); + return 0; +} + +static const struct of_device_id sprd_rtc_of_match[] = { + { .compatible = "sprd,sc2731-rtc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sprd_rtc_of_match); + +static struct platform_driver sprd_rtc_driver = { + .driver = { + .name = "sprd-rtc", + .of_match_table = sprd_rtc_of_match, + }, + .probe = sprd_rtc_probe, + .remove = sprd_rtc_remove, +}; +module_platform_driver(sprd_rtc_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Spreadtrum RTC Device Driver"); +MODULE_AUTHOR("Baolin Wang "); -- cgit v1.2.3-58-ga151 From 87c9fd81825363237ac5560822e2261535800597 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 15 Nov 2017 10:59:53 -0200 Subject: dt-bindings: rtc: imxdi: Improve the bindings text Improve the bindings text by doing the following changes: - Remove the i.MX53 reference, as the RTC on i.MX53 is a different hardware - Add 'clocks' to the list of required properties - Explain that the optional security violation irq is the second entry - Use the real unit address and irq numbers for i.MX25 Signed-off-by: Fabio Estevam Acked-by: Juergen Borleis Acked-by: Rob Herring Signed-off-by: Alexandre Belloni --- Documentation/devicetree/bindings/rtc/imxdi-rtc.txt | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt index 323cf26374cb..c797bc9d77d2 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt @@ -1,20 +1,20 @@ * i.MX25 Real Time Clock controller -This binding supports the following chips: i.MX25, i.MX53 - Required properties: - compatible: should be: "fsl,imx25-rtc" - reg: physical base address of the controller and length of memory mapped region. +- clocks: should contain the phandle for the rtc clock - interrupts: rtc alarm interrupt Optional properties: -- interrupts: dryice security violation interrupt +- interrupts: dryice security violation interrupt (second entry) Example: -rtc@80056000 { - compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; - reg = <0x80056000 2000>; - interrupts = <29 56>; +rtc@53ffc000 { + compatible = "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + interrupts = <25 56>; }; -- cgit v1.2.3-58-ga151