From fe710508b6ba9d28730f3021fed70e7043433b2e Mon Sep 17 00:00:00 2001 From: Collin May Date: Sat, 7 Apr 2018 14:32:48 -0700 Subject: USB: serial: simple: add libtransistor console Add simple driver for libtransistor USB console. This device is implemented in software: https://github.com/reswitched/libtransistor/blob/development/lib/usb_serial.c Signed-off-by: Collin May Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/Kconfig | 1 + drivers/usb/serial/usb-serial-simple.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index a646820f5a78..533f127c30ad 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -62,6 +62,7 @@ config USB_SERIAL_SIMPLE - Fundamental Software dongle. - Google USB serial devices - HP4x calculators + - Libtransistor USB console - a number of Motorola phones - Motorola Tetra devices - Novatel Wireless GPS receivers diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index 4ef79e29cb26..40864c2bd9dc 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -63,6 +63,11 @@ DEVICE(flashloader, FLASHLOADER_IDS); 0x01) } DEVICE(google, GOOGLE_IDS); +/* Libtransistor USB console */ +#define LIBTRANSISTOR_IDS() \ + { USB_DEVICE(0x1209, 0x8b00) } +DEVICE(libtransistor, LIBTRANSISTOR_IDS); + /* ViVOpay USB Serial Driver */ #define VIVOPAY_IDS() \ { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ @@ -110,6 +115,7 @@ static struct usb_serial_driver * const serial_drivers[] = { &funsoft_device, &flashloader_device, &google_device, + &libtransistor_device, &vivopay_device, &moto_modem_device, &motorola_tetra_device, @@ -126,6 +132,7 @@ static const struct usb_device_id id_table[] = { FUNSOFT_IDS(), FLASHLOADER_IDS(), GOOGLE_IDS(), + LIBTRANSISTOR_IDS(), VIVOPAY_IDS(), MOTO_IDS(), MOTOROLA_TETRA_IDS(), -- cgit v1.2.3-58-ga151 From 1e23aace21515a8f7615a1de016c0ea8d4e0cc6e Mon Sep 17 00:00:00 2001 From: Kyle Roeschley Date: Mon, 9 Apr 2018 10:23:55 -0500 Subject: USB: serial: cp210x: add ID for NI USB serial console Added the USB VID and PID for the USB serial console on some National Instruments devices. Signed-off-by: Kyle Roeschley Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index de1e759dd512..eb6c26cbe579 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -214,6 +214,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; -- cgit v1.2.3-58-ga151 From 470b5d6f0cf4674be2d1ec94e54283a1770b6a1a Mon Sep 17 00:00:00 2001 From: Vasyl Vavrychuk Date: Wed, 11 Apr 2018 17:05:13 +0300 Subject: USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster Arrow USB Blaster integrated on MAX1000 board uses the same vendor ID (0x0403) and product ID (0x6010) as the "original" FTDI device. This patch avoids picking up by ftdi_sio of the first interface of this USB device. After that this device can be used by Arrow user-space JTAG driver. Signed-off-by: Vasyl Vavrychuk Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 87202ad5a50d..7ea221d42dba 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1898,7 +1898,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial) return ftdi_jtag_probe(serial); if (udev->product && - (!strcmp(udev->product, "BeagleBone/XDS100V2") || + (!strcmp(udev->product, "Arrow USB Blaster") || + !strcmp(udev->product, "BeagleBone/XDS100V2") || !strcmp(udev->product, "SNAP Connect E10"))) return ftdi_jtag_probe(serial); -- cgit v1.2.3-58-ga151 From 621faf4f6a181b6e012c1d1865213f36f4159b7f Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Fri, 20 Apr 2018 16:52:50 +0300 Subject: xhci: Fix USB ports for Dell Inspiron 5775 The Dell Inspiron 5775 is a Raven Ridge. The Enable Slot command timed out when a USB device gets plugged: [ 212.156326] xhci_hcd 0000:03:00.3: Error while assigning device slot ID [ 212.156340] xhci_hcd 0000:03:00.3: Max number of devices this xHCI host supports is 64. [ 212.156348] usb usb2-port3: couldn't allocate usb_device AMD suggests that a delay before xHC suspends can fix the issue. I can confirm it fixes the issue, so use the suspend delay quirk for Raven Ridge's xHC. Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index f17b7eab66cf..85ffda85f8ab 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -126,7 +126,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; - if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb) + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || + pdev->device == 0x15e1 || + pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; if (pdev->vendor == PCI_VENDOR_ID_AMD) -- cgit v1.2.3-58-ga151 From 2d79609bf21eedb2142f9dff7d4af9919cd7399a Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 20 Apr 2018 16:52:51 +0300 Subject: usb: host: xhci-plat: Remove useless test before clk_disable_unprepare clk_disable_unprepare() already checks that the clock pointer is valid. No need to test it before calling it. Signed-off-by: Gregory CLEMENT Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index df327dcc2bac..f0231fea524e 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -320,8 +320,7 @@ put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); disable_clk: - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); + clk_disable_unprepare(clk); put_hcd: usb_put_hcd(hcd); @@ -347,8 +346,7 @@ static int xhci_plat_remove(struct platform_device *dev) usb_remove_hcd(hcd); usb_put_hcd(xhci->shared_hcd); - if (!IS_ERR(clk)) - clk_disable_unprepare(clk); + clk_disable_unprepare(clk); usb_put_hcd(hcd); pm_runtime_set_suspended(&dev->dev); -- cgit v1.2.3-58-ga151 From 3ae2da7b28b393d4f6faef3d384cc725ef39716b Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 20 Apr 2018 16:52:52 +0300 Subject: usb: host: xhci-plat: Fix clock resource by adding a register clock On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The change was done at xhci-plat level and not at a xhci-mvebu.c because, it is expected that other SoC would have this kind of constraint. The binding documentation is updating accordingly. Signed-off-by: Gregory CLEMENT Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- Documentation/devicetree/bindings/usb/usb-xhci.txt | 5 ++++- drivers/usb/host/xhci-plat.c | 25 ++++++++++++++++++---- drivers/usb/host/xhci.h | 3 ++- 3 files changed, 27 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index c4c00dff4b56..bd1dd316fb23 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -28,7 +28,10 @@ Required properties: - interrupts: one XHCI interrupt should be described here. Optional properties: - - clocks: reference to a clock + - clocks: reference to the clocks + - clock-names: mandatory if there is a second clock, in this case + the name must be "core" for the first clock and "reg" for the + second one - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index f0231fea524e..596e7a71b666 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -157,6 +157,7 @@ static int xhci_plat_probe(struct platform_device *pdev) struct resource *res; struct usb_hcd *hcd; struct clk *clk; + struct clk *reg_clk; int ret; int irq; @@ -226,17 +227,27 @@ static int xhci_plat_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); /* - * Not all platforms have a clk so it is not an error if the - * clock does not exists. + * Not all platforms have clks so it is not an error if the + * clock do not exist. */ + reg_clk = devm_clk_get(&pdev->dev, "reg"); + if (!IS_ERR(reg_clk)) { + ret = clk_prepare_enable(reg_clk); + if (ret) + goto put_hcd; + } else if (PTR_ERR(reg_clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; + } + clk = devm_clk_get(&pdev->dev, NULL); if (!IS_ERR(clk)) { ret = clk_prepare_enable(clk); if (ret) - goto put_hcd; + goto disable_reg_clk; } else if (PTR_ERR(clk) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; - goto put_hcd; + goto disable_reg_clk; } xhci = hcd_to_xhci(hcd); @@ -252,6 +263,7 @@ static int xhci_plat_probe(struct platform_device *pdev) device_wakeup_enable(hcd->self.controller); xhci->clk = clk; + xhci->reg_clk = reg_clk; xhci->main_hcd = hcd; xhci->shared_hcd = __usb_create_hcd(driver, sysdev, &pdev->dev, dev_name(&pdev->dev), hcd); @@ -322,6 +334,9 @@ put_usb3_hcd: disable_clk: clk_disable_unprepare(clk); +disable_reg_clk: + clk_disable_unprepare(reg_clk); + put_hcd: usb_put_hcd(hcd); @@ -337,6 +352,7 @@ static int xhci_plat_remove(struct platform_device *dev) struct usb_hcd *hcd = platform_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct clk *clk = xhci->clk; + struct clk *reg_clk = xhci->reg_clk; xhci->xhc_state |= XHCI_STATE_REMOVING; @@ -347,6 +363,7 @@ static int xhci_plat_remove(struct platform_device *dev) usb_put_hcd(xhci->shared_hcd); clk_disable_unprepare(clk); + clk_disable_unprepare(reg_clk); usb_put_hcd(hcd); pm_runtime_set_suspended(&dev->dev); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 05c909b04f14..6dfc4867dbcf 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1729,8 +1729,9 @@ struct xhci_hcd { int page_shift; /* msi-x vectors */ int msix_count; - /* optional clock */ + /* optional clocks */ struct clk *clk; + struct clk *reg_clk; /* data structures */ struct xhci_device_context_array *dcbaa; struct xhci_ring *cmd_ring; -- cgit v1.2.3-58-ga151 From 83a62c51ba7b3c0bf45150c4eac7aefc6c785e94 Mon Sep 17 00:00:00 2001 From: Ravi Chandra Sadineni Date: Fri, 20 Apr 2018 11:08:21 -0700 Subject: USB: Increment wakeup count on remote wakeup. On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by: Ravi Chandra Sadineni Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 1 + drivers/usb/core/hub.c | 10 +++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 777036ae6367..00bb8417050f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2377,6 +2377,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) { + pm_wakeup_event(&hcd->self.root_hub->dev, 0); set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); queue_work(pm_wq, &hcd->wakeup_work); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f6ea16e9f6bb..aa9968d90a48 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -653,12 +653,17 @@ void usb_wakeup_notification(struct usb_device *hdev, unsigned int portnum) { struct usb_hub *hub; + struct usb_port *port_dev; if (!hdev) return; hub = usb_hub_to_struct_hub(hdev); if (hub) { + port_dev = hub->ports[portnum - 1]; + if (port_dev && port_dev->child) + pm_wakeup_event(&port_dev->child->dev, 0); + set_bit(portnum, hub->wakeup_bits); kick_hub_wq(hub); } @@ -3434,8 +3439,11 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg) /* Skip the initial Clear-Suspend step for a remote wakeup */ status = hub_port_status(hub, port1, &portstatus, &portchange); - if (status == 0 && !port_is_suspended(hub, portstatus)) + if (status == 0 && !port_is_suspended(hub, portstatus)) { + if (portchange & USB_PORT_STAT_C_SUSPEND) + pm_wakeup_event(&udev->dev, 0); goto SuspendCleared; + } /* see 7.1.7.7; affects power usage, but not budgeting */ if (hub_is_superspeed(hub->hdev)) -- cgit v1.2.3-58-ga151 From 5b22f676118ff25049382041da0db8012e57c9e8 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 5 Apr 2018 16:31:49 -0600 Subject: usbip: vhci_hcd: check rhport before using in vhci_hub_control() Validate !rhport < 0 before using it to access port_status array. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/vhci_hcd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index 20e3d4609583..d11f3f8dad40 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -354,6 +354,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, usbip_dbg_vhci_rh(" ClearHubFeature\n"); break; case ClearPortFeature: + if (rhport < 0) + goto error; switch (wValue) { case USB_PORT_FEAT_SUSPEND: if (hcd->speed == HCD_USB3) { @@ -511,11 +513,16 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } + if (rhport < 0) + goto error; + vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; break; case USB_PORT_FEAT_POWER: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_POWER\n"); + if (rhport < 0) + goto error; if (hcd->speed == HCD_USB3) vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; else @@ -524,6 +531,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_BH_PORT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); + if (rhport < 0) + goto error; /* Applicable only for USB3.0 hub */ if (hcd->speed != HCD_USB3) { pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " @@ -534,6 +543,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_RESET: usbip_dbg_vhci_rh( " SetPortFeature: USB_PORT_FEAT_RESET\n"); + if (rhport < 0) + goto error; /* if it's already enabled, disable */ if (hcd->speed == HCD_USB3) { vhci_hcd->port_status[rhport] = 0; @@ -554,6 +565,8 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, default: usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", wValue); + if (rhport < 0) + goto error; if (hcd->speed == HCD_USB3) { if ((vhci_hcd->port_status[rhport] & USB_SS_PORT_STAT_POWER) != 0) { -- cgit v1.2.3-58-ga151 From 9020a7efe537856eb3e826ebebdf38a5d07a7857 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 2 Apr 2018 14:52:32 -0600 Subject: usbip: vhci_hcd: Fix usb device and sockfd leaks vhci_hcd fails to do reset to put usb device and sockfd in the module remove/stop paths. Fix the leak. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/usbip/usbip_common.h b/drivers/usb/usbip/usbip_common.h index 473fb8a87289..bf8afe9b5883 100644 --- a/drivers/usb/usbip/usbip_common.h +++ b/drivers/usb/usbip/usbip_common.h @@ -243,7 +243,7 @@ enum usbip_side { #define VUDC_EVENT_ERROR_USB (USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE) #define VUDC_EVENT_ERROR_MALLOC (USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE) -#define VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_BYE) +#define VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE) #define VDEV_EVENT_DOWN (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) #define VDEV_EVENT_ERROR_TCP (USBIP_EH_SHUTDOWN | USBIP_EH_RESET) #define VDEV_EVENT_ERROR_MALLOC (USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE) -- cgit v1.2.3-58-ga151 From 4bfb141bc01312a817d36627cc47c93f801c216d Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 5 Apr 2018 16:29:04 -0600 Subject: usbip: usbip_host: fix to hold parent lock for device_attach() calls usbip_host calls device_attach() without holding dev->parent lock. Fix it. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/stub_main.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index c31c8402a0c5..d41d0cdeec0f 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -186,7 +186,12 @@ static ssize_t rebind_store(struct device_driver *dev, const char *buf, if (!bid) return -ENODEV; + /* device_attach() callers should hold parent lock for USB */ + if (bid->udev->dev.parent) + device_lock(bid->udev->dev.parent); ret = device_attach(&bid->udev->dev); + if (bid->udev->dev.parent) + device_unlock(bid->udev->dev.parent); if (ret < 0) { dev_err(&bid->udev->dev, "rebind failed\n"); return ret; -- cgit v1.2.3-58-ga151 From 4c982482341c64f55daf69b6caa5a2bcd9b43824 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 5 Apr 2018 16:29:50 -0600 Subject: usbip: usbip_event: fix to not print kernel pointer address Fix it to not print kernel pointer address. Remove the conditional and debug message as it isn't very useful. Signed-off-by: Shuah Khan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usbip/usbip_event.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/usb/usbip/usbip_event.c b/drivers/usb/usbip/usbip_event.c index 5b4c0864ad92..5d88917c9631 100644 --- a/drivers/usb/usbip/usbip_event.c +++ b/drivers/usb/usbip/usbip_event.c @@ -91,10 +91,6 @@ static void event_handler(struct work_struct *work) unset_event(ud, USBIP_EH_UNUSABLE); } - /* Stop the error handler. */ - if (ud->event & USBIP_EH_BYE) - usbip_dbg_eh("removed %p\n", ud); - wake_up(&ud->eh_waitq); } } -- cgit v1.2.3-58-ga151 From 2f860691c2d2e3af1404ffeb2d22dd5c3dbca811 Mon Sep 17 00:00:00 2001 From: Tobias Regnery Date: Tue, 10 Apr 2018 10:38:06 +0200 Subject: usb: typec: ucsi: fix tracepoint related build error There is the following build error with CONFIG_TYPEC_UCSI=m, CONFIG_FTRACE=y and CONFIG_TRACING=n: ERROR: "__tracepoint_ucsi_command" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_register_port" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_notify" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_reset_ppm" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_run_command" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_ack" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_connector_change" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! This compination is quite hard to create because CONFIG_TRACING gets selected only in rare cases without CONFIG_FTRACE. The build failure is caused by conditionally compiling trace.c depending on the wrong option CONFIG_FTRACE. Change this to depend on CONFIG_TRACING like other users of tracepoints do. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Tobias Regnery Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile index b57891c1fd31..7afbea512207 100644 --- a/drivers/usb/typec/ucsi/Makefile +++ b/drivers/usb/typec/ucsi/Makefile @@ -5,6 +5,6 @@ obj-$(CONFIG_TYPEC_UCSI) += typec_ucsi.o typec_ucsi-y := ucsi.o -typec_ucsi-$(CONFIG_FTRACE) += trace.o +typec_ucsi-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o -- cgit v1.2.3-58-ga151 From 1acc85d82f1510f1176a5f873c30d57ab7a36218 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 6 Apr 2018 15:41:22 +0300 Subject: Documentation: typec.rst: Use literal-block element with ascii art Using reStructuredText literal-block element with ascii-art. That prevents the ascii art from being processed as reStructuredText. Reported-by: Masanari Iida Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers") Signed-off-by: Heikki Krogerus Reviewed-by: Jani Nikula Tested-by: Jani Nikula Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-api/usb/typec.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst index feb31946490b..48ff58095f11 100644 --- a/Documentation/driver-api/usb/typec.rst +++ b/Documentation/driver-api/usb/typec.rst @@ -210,7 +210,7 @@ If the connector is dual-role capable, there may also be a switch for the data role. USB Type-C Connector Class does not supply separate API for them. The port drivers can use USB Role Class API with those. -Illustration of the muxes behind a connector that supports an alternate mode: +Illustration of the muxes behind a connector that supports an alternate mode:: ------------------------ | Connector | -- cgit v1.2.3-58-ga151 From 3180dabe08e3653bf0a838553905d88f3773f29c Mon Sep 17 00:00:00 2001 From: Kamil Lulko Date: Thu, 19 Apr 2018 16:54:02 -0700 Subject: usb: core: Add quirk for HP v222w 16GB Mini Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by: Kamil Lulko Signed-off-by: Kuppuswamy Sathyanarayanan Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 920f48a49a87..c55def2f1320 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -186,6 +186,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* HP v222w 16GB Mini USB Drive */ + { USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.2.3-58-ga151 From c20f53c58261b121d0989e147368803b9773b413 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 22 Apr 2018 14:31:03 +0200 Subject: Revert "xhci: plat: Register shutdown for xhci_plat" This reverts commit b07c12517f2aed0add8ce18146bb426b14099392 It is incomplete and causes hangs on devices when shutting down. It needs a much more "complete" fix in order to work properly. As that fix has not been merged, revert this patch for now before it causes any more problems. Cc: Greg Hackmann Cc: Adam Wallis Cc: Mathias Nyman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 596e7a71b666..c1b22fc64e38 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -435,7 +435,6 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); static struct platform_driver usb_xhci_driver = { .probe = xhci_plat_probe, .remove = xhci_plat_remove, - .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xhci-hcd", .pm = &xhci_plat_pm_ops, -- cgit v1.2.3-58-ga151 From b1b59e16075f5e5da2943ce8de724ab96bc3c6c2 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Wed, 18 Apr 2018 15:34:10 +0300 Subject: usb: typec: ucsi: Increase command completion timeout value On some boards, under heavy load, the EC firmware is unable to complete commands even in one second. Increasing the command completion timeout value to five seconds. Reported-by: Quanxian Wang Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index bf0977fbd100..bd5cca5632b3 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -28,7 +28,7 @@ * difficult to estimate the time it takes for the system to process the command * before it is actually passed to the PPM. */ -#define UCSI_TIMEOUT_MS 1000 +#define UCSI_TIMEOUT_MS 5000 /* * UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests -- cgit v1.2.3-58-ga151 From dd40438fc6be7454c906093fe2a1b69ca98946fb Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:46 +0200 Subject: usb: core: phy: fix return value of usb_phy_roothub_exit() usb_phy_roothub_exit() should return the error code from the phy_exit() call if exiting the PHY failed. However, since a wrong variable is used usb_phy_roothub_exit() currently always returns 0, even if one of the phy_exit calls returned an error. Clang also reports this bug: kernel/drivers/usb/core/phy.c:114:8: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] error, forbidden warning: phy.c:114 Fix this by assigning the error code from phy_exit() to the "ret" variable to propagate the error correctly. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Signed-off-by: Martin Blumenstingl Signed-off-by: Rishabh Bhatnagar Tested-by: Keerthy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index 09b7c43c0ea4..f19aaa3c899c 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -111,7 +111,7 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub) list_for_each_entry(roothub_entry, head, list) { err = phy_exit(roothub_entry->phy); if (err) - ret = ret; + ret = err; } return ret; -- cgit v1.2.3-58-ga151 From 63cb03f5c11eef2c08b5812f4533ba87cf778fa8 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:47 +0200 Subject: usb: core: split usb_phy_roothub_{init,alloc} Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl Tested-by: Chunfeng Yun Reviewed-by: Roger Quadros Tested-by: Keerthy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 10 +++++++--- drivers/usb/core/phy.c | 53 +++++++++++++++++++++++++------------------------- drivers/usb/core/phy.h | 4 +++- 3 files changed, 37 insertions(+), 30 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 00bb8417050f..f0e5f4d875d8 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2759,12 +2759,16 @@ int usb_add_hcd(struct usb_hcd *hcd, } if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { - hcd->phy_roothub = usb_phy_roothub_init(hcd->self.sysdev); + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); if (IS_ERR(hcd->phy_roothub)) { retval = PTR_ERR(hcd->phy_roothub); - goto err_phy_roothub_init; + goto err_phy_roothub_alloc; } + retval = usb_phy_roothub_init(hcd->phy_roothub); + if (retval) + goto err_phy_roothub_alloc; + retval = usb_phy_roothub_power_on(hcd->phy_roothub); if (retval) goto err_usb_phy_roothub_power_on; @@ -2937,7 +2941,7 @@ err_create_buf: usb_phy_roothub_power_off(hcd->phy_roothub); err_usb_phy_roothub_power_on: usb_phy_roothub_exit(hcd->phy_roothub); -err_phy_roothub_init: +err_phy_roothub_alloc: if (hcd->remove_phy && hcd->usb_phy) { usb_phy_shutdown(hcd->usb_phy); usb_put_phy(hcd->usb_phy); diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index f19aaa3c899c..44f008cda7a8 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -19,19 +19,6 @@ struct usb_phy_roothub { struct list_head list; }; -static struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) -{ - struct usb_phy_roothub *roothub_entry; - - roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); - if (!roothub_entry) - return ERR_PTR(-ENOMEM); - - INIT_LIST_HEAD(&roothub_entry->list); - - return roothub_entry; -} - static int usb_phy_roothub_add_phy(struct device *dev, int index, struct list_head *list) { @@ -45,9 +32,11 @@ static int usb_phy_roothub_add_phy(struct device *dev, int index, return PTR_ERR(phy); } - roothub_entry = usb_phy_roothub_alloc(dev); - if (IS_ERR(roothub_entry)) - return PTR_ERR(roothub_entry); + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); + if (!roothub_entry) + return -ENOMEM; + + INIT_LIST_HEAD(&roothub_entry->list); roothub_entry->phy = phy; @@ -56,11 +45,9 @@ static int usb_phy_roothub_add_phy(struct device *dev, int index, return 0; } -struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev) +struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) { struct usb_phy_roothub *phy_roothub; - struct usb_phy_roothub *roothub_entry; - struct list_head *head; int i, num_phys, err; num_phys = of_count_phandle_with_args(dev->of_node, "phys", @@ -68,16 +55,31 @@ struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev) if (num_phys <= 0) return NULL; - phy_roothub = usb_phy_roothub_alloc(dev); - if (IS_ERR(phy_roothub)) - return phy_roothub; + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); + if (!phy_roothub) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&phy_roothub->list); for (i = 0; i < num_phys; i++) { err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); if (err) - goto err_out; + return ERR_PTR(err); } + return phy_roothub; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); + +int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + head = &phy_roothub->list; list_for_each_entry(roothub_entry, head, list) { @@ -86,14 +88,13 @@ struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev) goto err_exit_phys; } - return phy_roothub; + return 0; err_exit_phys: list_for_each_entry_continue_reverse(roothub_entry, head, list) phy_exit(roothub_entry->phy); -err_out: - return ERR_PTR(err); + return err; } EXPORT_SYMBOL_GPL(usb_phy_roothub_init); diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index 6fde59bfbff8..eb31253201ad 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -1,6 +1,8 @@ struct usb_phy_roothub; -struct usb_phy_roothub *usb_phy_roothub_init(struct device *dev); +struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); + +int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); -- cgit v1.2.3-58-ga151 From f0e36d478faf37fb26413b2530d04e6b30af3834 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:48 +0200 Subject: usb: core: use phy_exit during suspend if wake up is not supported If the USB controller can wake up the system (which is the case for example with the Mediatek USB3 IP) then we must not call phy_exit during suspend to ensure that the USB controller doesn't have to re-enumerate the devices during resume. However, if the USB controller cannot wake up the system (which is the case for example on various TI platforms using a dwc3 controller) then we must call phy_exit during suspend. Otherwise the PHY driver keeps the clocks enabled, which prevents the system from reaching the lowest power levels in the suspend state. Solve this by introducing two new functions in the PHY wrapper which are dedicated to the suspend and resume handling. If the controller can wake up the system the new usb_phy_roothub_suspend function will simply call usb_phy_roothub_power_off. However, if wake up is not supported by the controller it will also call usb_phy_roothub_exit. The also new usb_phy_roothub_resume function takes care of calling usb_phy_roothub_init (if the controller can't wake up the system) in addition to usb_phy_roothub_power_on. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Reported-by: Roger Quadros Suggested-by: Roger Quadros Suggested-by: Chunfeng Yun Signed-off-by: Martin Blumenstingl Tested-by: Chunfeng Yun Reviewed-by: Roger Quadros Tested-by: Keerthy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 8 +++++--- drivers/usb/core/phy.c | 35 +++++++++++++++++++++++++++++++++++ drivers/usb/core/phy.h | 5 +++++ 3 files changed, 45 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index f0e5f4d875d8..0a42c5df3c0f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2262,7 +2262,8 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) hcd->state = HC_STATE_SUSPENDED; if (!PMSG_IS_AUTO(msg)) - usb_phy_roothub_power_off(hcd->phy_roothub); + usb_phy_roothub_suspend(hcd->self.sysdev, + hcd->phy_roothub); /* Did we race with a root-hub wakeup event? */ if (rhdev->do_remote_wakeup) { @@ -2302,7 +2303,8 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) } if (!PMSG_IS_AUTO(msg)) { - status = usb_phy_roothub_power_on(hcd->phy_roothub); + status = usb_phy_roothub_resume(hcd->self.sysdev, + hcd->phy_roothub); if (status) return status; } @@ -2344,7 +2346,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) } } else { hcd->state = old_state; - usb_phy_roothub_power_off(hcd->phy_roothub); + usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub); dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "resume", status); if (status != -ESHUTDOWN) diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index 44f008cda7a8..a39d9bb26a4f 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -157,3 +157,38 @@ void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub) phy_power_off(roothub_entry->phy); } EXPORT_SYMBOL_GPL(usb_phy_roothub_power_off); + +int usb_phy_roothub_suspend(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub) +{ + usb_phy_roothub_power_off(phy_roothub); + + /* keep the PHYs initialized so the device can wake up the system */ + if (device_may_wakeup(controller_dev)) + return 0; + + return usb_phy_roothub_exit(phy_roothub); +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_suspend); + +int usb_phy_roothub_resume(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub) +{ + int err; + + /* if the device can't wake up the system _exit was called */ + if (!device_may_wakeup(controller_dev)) { + err = usb_phy_roothub_init(phy_roothub); + if (err) + return err; + } + + err = usb_phy_roothub_power_on(phy_roothub); + + /* undo _init if _power_on failed */ + if (err && !device_may_wakeup(controller_dev)) + usb_phy_roothub_exit(phy_roothub); + + return err; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_resume); diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index eb31253201ad..605555901d44 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -7,3 +7,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); + +int usb_phy_roothub_suspend(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_resume(struct device *controller_dev, + struct usb_phy_roothub *phy_roothub); -- cgit v1.2.3-58-ga151 From fec94445db7777c65b0a681b8dc0ed2532304d2a Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:49 +0200 Subject: usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled If the generic PHY support is disabled the stub of devm_of_phy_get_by_index returns ENOSYS. This corner case isn't handled properly by usb_phy_roothub_add_phy and at least breaks USB support on Raspberry Pi (bcm2835_defconfig): dwc2 20980000.usb: dwc2_hcd_init() FAILED, returning -38 dwc2: probe of 20980000.usb failed with error -38 Let usb_phy_roothub_alloc() return in case CONFIG_GENERIC_PHY is disabled to fix this issue (compilers might even be smart enough to optimize away most of the code within usb_phy_roothub_alloc and usb_phy_roothub_add_phy if CONFIG_GENERIC_PHY is disabled). All existing usb_phy_roothub_* functions are already NULL-safe, so no special handling is required there. Fixes: 07dbff0ddbd8 ("usb: core: add a wrapper for the USB PHYs on the HCD") Reported-by: Stefan Wahren Signed-off-by: Martin Blumenstingl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/phy.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index a39d9bb26a4f..9879767452a2 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -50,6 +50,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) struct usb_phy_roothub *phy_roothub; int i, num_phys, err; + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) + return NULL; + num_phys = of_count_phandle_with_args(dev->of_node, "phys", "#phy-cells"); if (num_phys <= 0) -- cgit v1.2.3-58-ga151 From 9d3cd19be3e2675f5b30172f3305f79ddcb91023 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:50 +0200 Subject: usb: core: phy: add missing forward declaration for "struct device" Currently hcd.c is the only consumer of the usb_phy_roothub logic. This already includes the required header files so struct device is known. However, future consumers might not know about struct device. Add a forward declaration for struct device to fix potential future consumers which don't include any of the struct device API headers. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Suggested-by: Masahiro Yamada Signed-off-by: Martin Blumenstingl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/phy.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index 605555901d44..bbc969383074 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -1,3 +1,4 @@ +struct device; struct usb_phy_roothub; struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); -- cgit v1.2.3-58-ga151 From 602f4fb71d2b4aa5a447d4ed25a58fd098df9058 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 4 Apr 2018 14:21:53 +0200 Subject: usb: select USB_COMMON for usb role switch config The new axp288 extcon driver has no dependency on USB itself but calls the usb role switch helper functions. This causes a link error when USB_COMMON is disabled, as that subdirectory never gets entered: drivers/extcon/extcon-axp288.o: In function `axp288_usb_role_work': extcon-axp288.c:(.text+0x47b): undefined reference to `usb_role_switch_set_role' extcon-axp288.c:(.text+0x498): undefined reference to `usb_role_switch_get_role' drivers/extcon/extcon-axp288.o: In function `axp288_extcon_probe': extcon-axp288.c:(.text+0x675): undefined reference to `usb_role_switch_get' extcon-axp288.c:(.text+0x6d1): undefined reference to `usb_role_switch_put' drivers/extcon/extcon-axp288.o: In function `axp288_put_role_sw': extcon-axp288.c:(.text+0x1c): undefined reference to `usb_role_switch_put' There are multiple ways of fixing this, I chose to 'select USB_COMMON', since that is how we solved the same problem for other helpers like USB_LED_TRIG or PHY drivers. Fixes: d54f063cdbe4 ("extcon: axp288: Set USB role where necessary") Signed-off-by: Arnd Bergmann Reviewed-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 75f7fb151f71..987fc5ba6321 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -207,5 +207,6 @@ config USB_ULPI_BUS config USB_ROLE_SWITCH tristate + select USB_COMMON endif # USB_SUPPORT -- cgit v1.2.3-58-ga151 From 7fc65d4c2ba9e5006c629669146c6876b65aa233 Mon Sep 17 00:00:00 2001 From: Zhengjun Xing Date: Fri, 13 Apr 2018 15:55:34 +0300 Subject: xhci: Fix Kernel oops in xhci dbgtty tty_unregister_driver may be called more than 1 time in some hotplug cases,it will cause the kernel oops. This patch checked dbc_tty_driver to make sure it is unregistered only 1 time. [ 175.741404] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 [ 175.742309] IP: tty_unregister_driver+0x9/0x70 [ 175.743148] PGD 0 P4D 0 [ 175.743981] Oops: 0000 [#1] SMP PTI [ 175.753904] RIP: 0010:tty_unregister_driver+0x9/0x70 [ 175.754817] RSP: 0018:ffffa8ff831d3bb0 EFLAGS: 00010246 [ 175.755753] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 175.756685] RDX: ffff92089c616000 RSI: ffffe64fe1b26080 RDI: 0000000000000000 [ 175.757608] RBP: ffff92086c988230 R08: 000000006c982701 R09: 00000001801e0016 [ 175.758533] R10: ffffa8ff831d3b48 R11: ffff92086c982100 R12: ffff92086c98827c [ 175.759462] R13: ffff92086c988398 R14: 0000000000000060 R15: ffff92089c5e9b40 [ 175.760401] FS: 0000000000000000(0000) GS:ffff9208a0100000(0000) knlGS:0000000000000000 [ 175.761334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 175.762270] CR2: 0000000000000034 CR3: 000000011800a003 CR4: 00000000003606e0 [ 175.763225] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 175.764164] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 175.765091] Call Trace: [ 175.766014] xhci_dbc_tty_unregister_driver+0x11/0x30 [ 175.766960] xhci_dbc_exit+0x2a/0x40 [ 175.767889] xhci_stop+0x57/0x1c0 [ 175.768824] usb_remove_hcd+0x100/0x250 [ 175.769708] usb_hcd_pci_remove+0x68/0x130 [ 175.770574] pci_device_remove+0x3b/0xc0 [ 175.771435] device_release_driver_internal+0x157/0x230 [ 175.772343] pci_stop_bus_device+0x74/0xa0 [ 175.773205] pci_stop_bus_device+0x2b/0xa0 [ 175.774061] pci_stop_bus_device+0x2b/0xa0 [ 175.774907] pci_stop_bus_device+0x2b/0xa0 [ 175.775741] pci_stop_bus_device+0x2b/0xa0 [ 175.776618] pci_stop_bus_device+0x2b/0xa0 [ 175.777452] pci_stop_bus_device+0x2b/0xa0 [ 175.778273] pci_stop_bus_device+0x2b/0xa0 [ 175.779092] pci_stop_bus_device+0x2b/0xa0 [ 175.779908] pci_stop_bus_device+0x2b/0xa0 [ 175.780750] pci_stop_bus_device+0x2b/0xa0 [ 175.781543] pci_stop_and_remove_bus_device+0xe/0x20 [ 175.782338] pciehp_unconfigure_device+0xb8/0x160 [ 175.783128] pciehp_disable_slot+0x4f/0xd0 [ 175.783920] pciehp_power_thread+0x82/0xa0 [ 175.784766] process_one_work+0x147/0x3c0 [ 175.785564] worker_thread+0x4a/0x440 [ 175.786376] kthread+0xf8/0x130 [ 175.787174] ? rescuer_thread+0x360/0x360 [ 175.787964] ? kthread_associate_blkcg+0x90/0x90 [ 175.788798] ret_from_fork+0x35/0x40 Cc: # 4.16 Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Zhengjun Xing Tested-by: Christian Kellner Reviewed-by: Christian Kellner Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-dbgtty.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index 48779c44c361..eb494ec547e8 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -320,9 +320,11 @@ int xhci_dbc_tty_register_driver(struct xhci_hcd *xhci) void xhci_dbc_tty_unregister_driver(void) { - tty_unregister_driver(dbc_tty_driver); - put_tty_driver(dbc_tty_driver); - dbc_tty_driver = NULL; + if (dbc_tty_driver) { + tty_unregister_driver(dbc_tty_driver); + put_tty_driver(dbc_tty_driver); + dbc_tty_driver = NULL; + } } static void dbc_rx_push(unsigned long _port) -- cgit v1.2.3-58-ga151 From 350f76dc063934215a877ef582206763c8a80395 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Wed, 18 Apr 2018 21:39:51 +0200 Subject: usb: core: phy: add the SPDX-License-Identifier and include guard This clarifies the license of the code. While here also add an include guard to the header file. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Suggested-by: Masahiro Yamada Signed-off-by: Martin Blumenstingl Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/phy.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index bbc969383074..88a3c037e9df 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -1,3 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * USB roothub wrapper + * + * Copyright (C) 2018 Martin Blumenstingl + */ + +#ifndef __USB_CORE_PHY_H_ +#define __USB_CORE_PHY_H_ + struct device; struct usb_phy_roothub; @@ -13,3 +23,5 @@ int usb_phy_roothub_suspend(struct device *controller_dev, struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_resume(struct device *controller_dev, struct usb_phy_roothub *phy_roothub); + +#endif /* __USB_CORE_PHY_H_ */ -- cgit v1.2.3-58-ga151 From 1f81f118406774ca65f5a4b1a63ee2478ba826ac Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 23 Apr 2018 08:50:01 -0500 Subject: USB: musb: host: prevent core phy initialisation Set the new HCD flag which prevents USB core from trying to manage our phys. This is needed to be able to associate the controller platform device with the glue device device-tree node on the BBB which uses legacy USB phys. Otherwise, the generic phy lookup in usb_phy_roothub_init() and thus HCD registration fails repeatedly with -EPROBE_DEFER (see commit 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core")). Note that a related phy-lookup issue was recently worked around in the phy core by commit b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices"). Something similar may now be needed for other USB phys, and in particular if we eventually want to let USB core manage musb generic phys. Cc: Arnd Bergmann Cc: Martin Blumenstingl Signed-off-by: Johan Hovold Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3a8451a15f7f..4fa372c845e1 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2754,6 +2754,7 @@ int musb_host_setup(struct musb *musb, int power_budget) hcd->self.otg_port = 1; musb->xceiv->otg->host = &hcd->self; hcd->power_budget = 2 * (power_budget ? : 250); + hcd->skip_phy_initialization = 1; ret = usb_add_hcd(hcd, 0, 0); if (ret < 0) -- cgit v1.2.3-58-ga151 From be75d8f1da08db6c3ccf3bae5597628109a9e7d0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 23 Apr 2018 08:50:00 -0500 Subject: USB: musb: dsps: drop duplicate phy initialisation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 39cee200c23e ("usb: musb: core: call init and shutdown for the usb phy") the musb USB phy is initialised by musb_core, but the original initialisation in the dsps-glue init callback was left in place resulting in two calls to phy init during probe (and similarly, two shutdowns on remove). Drop the duplicate phy init and shutdown calls from the dsps glue in favour of the ones in musb core, which other glue drivers rely on. Note however that any generic phy is still initialised in the glue init callback (just as for the other drivers). Cc: Uwe Kleine-König Signed-off-by: Johan Hovold Acked-by: Uwe Kleine-König Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_dsps.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 05a679d5e3a2..6a60bc0490c5 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -451,7 +451,6 @@ static int dsps_musb_init(struct musb *musb) if (!rev) return -ENODEV; - usb_phy_init(musb->xceiv); if (IS_ERR(musb->phy)) { musb->phy = NULL; } else { @@ -501,7 +500,6 @@ static int dsps_musb_exit(struct musb *musb) struct dsps_glue *glue = dev_get_drvdata(dev->parent); del_timer_sync(&musb->dev_timer); - usb_phy_shutdown(musb->xceiv); phy_power_off(musb->phy); phy_exit(musb->phy); debugfs_remove_recursive(glue->dbgfs_root); -- cgit v1.2.3-58-ga151