From d8ef4b38cb69d907f9b0e889c44d05fc0f890977 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 9 Apr 2020 14:55:35 -0400 Subject: Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window" This reverts commit 9a9e97b2f1f2 ("cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"). The commit was added in anticipation of memcg rstat conversion which needed synchronous accounting for the event counters (e.g. oom kill count). However, the conversion didn't get merged due to percpu memory overhead concern which couldn't be addressed at the time. Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated() meant that every scheduling event now had to go through an additional full barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test. There's no need to have this barrier in tree now and even if we need synchronous accounting in the future, the right thing to do is separating that out to a separate function so that hot paths which don't care about synchronous behavior don't have to pay the overhead of the full barrier. Let's revert. Signed-off-by: Tejun Heo Reported-by: Mel Gorman Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net Cc: v4.18+ --- kernel/cgroup/rstat.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c index 6f87352f8219..41ca996568df 100644 --- a/kernel/cgroup/rstat.c +++ b/kernel/cgroup/rstat.c @@ -33,12 +33,9 @@ void cgroup_rstat_updated(struct cgroup *cgrp, int cpu) return; /* - * Paired with the one in cgroup_rstat_cpu_pop_updated(). Either we - * see NULL updated_next or they see our updated stat. - */ - smp_mb(); - - /* + * Speculative already-on-list test. This may race leading to + * temporary inaccuracies, which is fine. + * * Because @parent's updated_children is terminated with @parent * instead of NULL, we can tell whether @cgrp is on the list by * testing the next pointer for NULL. @@ -134,13 +131,6 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos, *nextp = rstatc->updated_next; rstatc->updated_next = NULL; - /* - * Paired with the one in cgroup_rstat_cpu_updated(). - * Either they see NULL updated_next or we see their - * updated stat. - */ - smp_mb(); - return pos; } -- cgit v1.2.3-58-ga151 From 772b3140669246e1ab32392c490d338e2eb7b803 Mon Sep 17 00:00:00 2001 From: Daniel Xu Date: Wed, 8 Apr 2020 23:27:29 -0700 Subject: xattr: fix uninitialized out-param `removed_sized` isn't correctly initialized (as the doc comment suggests) on memory allocation failures. Fix by moving initialization up a bit. Fixes: 0c47383ba3bd ("kernfs: Add option to enable user xattrs") Reported-by: Dan Carpenter Signed-off-by: Daniel Xu Signed-off-by: Tejun Heo --- fs/xattr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/xattr.c b/fs/xattr.c index e13265e65871..91608d9bfc6a 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -876,6 +876,9 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name, struct simple_xattr *new_xattr = NULL; int err = 0; + if (removed_size) + *removed_size = -1; + /* value == NULL means remove */ if (value) { new_xattr = simple_xattr_alloc(value, size); @@ -914,9 +917,6 @@ int simple_xattr_set(struct simple_xattrs *xattrs, const char *name, list_add(&new_xattr->list, &xattrs->head); xattr = NULL; } - - if (removed_size) - *removed_size = -1; out: spin_unlock(&xattrs->lock); if (xattr) { -- cgit v1.2.3-58-ga151 From eec8fd0277e37cf447b88c6be181e81df867bcf1 Mon Sep 17 00:00:00 2001 From: Odin Ugedal Date: Fri, 3 Apr 2020 19:55:28 +0200 Subject: device_cgroup: Cleanup cgroup eBPF device filter code Original cgroup v2 eBPF code for filtering device access made it possible to compile with CONFIG_CGROUP_DEVICE=n and still use the eBPF filtering. Change commit 4b7d4d453fc4 ("device_cgroup: Export devcgroup_check_permission") reverted this, making it required to set it to y. Since the device filtering (and all the docs) for cgroup v2 is no longer a "device controller" like it was in v1, someone might compile their kernel with CONFIG_CGROUP_DEVICE=n. Then (for linux 5.5+) the eBPF filter will not be invoked, and all processes will be allowed access to all devices, no matter what the eBPF filter says. Signed-off-by: Odin Ugedal Acked-by: Roman Gushchin Signed-off-by: Tejun Heo --- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 2 +- include/linux/device_cgroup.h | 14 +++++--------- security/Makefile | 2 +- security/device_cgroup.c | 19 ++++++++++++++++--- 4 files changed, 23 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 4a3049841086..c24cad3c64ed 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1050,7 +1050,7 @@ void kfd_dec_compute_active(struct kfd_dev *dev); /* Check with device cgroup if @kfd device is accessible */ static inline int kfd_devcgroup_check_permission(struct kfd_dev *kfd) { -#if defined(CONFIG_CGROUP_DEVICE) +#if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) struct drm_device *ddev = kfd->ddev; return devcgroup_check_permission(DEVCG_DEV_CHAR, ddev->driver->major, diff --git a/include/linux/device_cgroup.h b/include/linux/device_cgroup.h index fa35b52e0002..9a72214496e5 100644 --- a/include/linux/device_cgroup.h +++ b/include/linux/device_cgroup.h @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include -#include #define DEVCG_ACC_MKNOD 1 #define DEVCG_ACC_READ 2 @@ -11,16 +10,10 @@ #define DEVCG_DEV_CHAR 2 #define DEVCG_DEV_ALL 4 /* this represents all devices */ -#ifdef CONFIG_CGROUP_DEVICE -int devcgroup_check_permission(short type, u32 major, u32 minor, - short access); -#else -static inline int devcgroup_check_permission(short type, u32 major, u32 minor, - short access) -{ return 0; } -#endif #if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) +int devcgroup_check_permission(short type, u32 major, u32 minor, + short access); static inline int devcgroup_inode_permission(struct inode *inode, int mask) { short type, access = 0; @@ -61,6 +54,9 @@ static inline int devcgroup_inode_mknod(int mode, dev_t dev) } #else +static inline int devcgroup_check_permission(short type, u32 major, u32 minor, + short access) +{ return 0; } static inline int devcgroup_inode_permission(struct inode *inode, int mask) { return 0; } static inline int devcgroup_inode_mknod(int mode, dev_t dev) diff --git a/security/Makefile b/security/Makefile index 22e73a3482bd..3baf435de541 100644 --- a/security/Makefile +++ b/security/Makefile @@ -30,7 +30,7 @@ obj-$(CONFIG_SECURITY_YAMA) += yama/ obj-$(CONFIG_SECURITY_LOADPIN) += loadpin/ obj-$(CONFIG_SECURITY_SAFESETID) += safesetid/ obj-$(CONFIG_SECURITY_LOCKDOWN_LSM) += lockdown/ -obj-$(CONFIG_CGROUP_DEVICE) += device_cgroup.o +obj-$(CONFIG_CGROUPS) += device_cgroup.o obj-$(CONFIG_BPF_LSM) += bpf/ # Object integrity file lists diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 7d0f8f7431ff..43ab0ad45c1b 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -15,6 +15,8 @@ #include #include +#ifdef CONFIG_CGROUP_DEVICE + static DEFINE_MUTEX(devcgroup_mutex); enum devcg_behavior { @@ -792,7 +794,7 @@ struct cgroup_subsys devices_cgrp_subsys = { }; /** - * __devcgroup_check_permission - checks if an inode operation is permitted + * devcgroup_legacy_check_permission - checks if an inode operation is permitted * @dev_cgroup: the dev cgroup to be tested against * @type: device type * @major: device major number @@ -801,7 +803,7 @@ struct cgroup_subsys devices_cgrp_subsys = { * * returns 0 on success, -EPERM case the operation is not permitted */ -static int __devcgroup_check_permission(short type, u32 major, u32 minor, +static int devcgroup_legacy_check_permission(short type, u32 major, u32 minor, short access) { struct dev_cgroup *dev_cgroup; @@ -825,6 +827,10 @@ static int __devcgroup_check_permission(short type, u32 major, u32 minor, return 0; } +#endif /* CONFIG_CGROUP_DEVICE */ + +#if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) + int devcgroup_check_permission(short type, u32 major, u32 minor, short access) { int rc = BPF_CGROUP_RUN_PROG_DEVICE_CGROUP(type, major, minor, access); @@ -832,6 +838,13 @@ int devcgroup_check_permission(short type, u32 major, u32 minor, short access) if (rc) return -EPERM; - return __devcgroup_check_permission(type, major, minor, access); + #ifdef CONFIG_CGROUP_DEVICE + return devcgroup_legacy_check_permission(type, major, minor, access); + + #else /* CONFIG_CGROUP_DEVICE */ + return 0; + + #endif /* CONFIG_CGROUP_DEVICE */ } EXPORT_SYMBOL(devcgroup_check_permission); +#endif /* defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) */ -- cgit v1.2.3-58-ga151 From f27ad8932725f8dd0cd1a46763de4a40377b1ae6 Mon Sep 17 00:00:00 2001 From: Johnny Chuang Date: Thu, 9 Apr 2020 12:42:42 -0700 Subject: Input: elants_i2c - support palm detection Elan uses the least significant bit of byte 33 to signal the type of contact (finger versus palm). The default value is 1 for all firmwares, which is reported as MT_TOOL_FINGER. If firmware supports palm detection, the bit will change to 0 and the driver will report such contact as MT_TOOL_PALM. Signed-off-by: Johnny Chuang Reviewed-by: Peter Hutterer Link: https://lore.kernel.org/r/1585551756-29066-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/elants_i2c.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 14c577c16b16..2289f9638116 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -19,6 +19,7 @@ */ +#include #include #include #include @@ -73,6 +74,7 @@ #define FW_POS_STATE 1 #define FW_POS_TOTAL 2 #define FW_POS_XY 3 +#define FW_POS_TOOL_TYPE 33 #define FW_POS_CHECKSUM 34 #define FW_POS_WIDTH 35 #define FW_POS_PRESSURE 45 @@ -842,6 +844,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf) { struct input_dev *input = ts->input; unsigned int n_fingers; + unsigned int tool_type; u16 finger_state; int i; @@ -852,6 +855,10 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf) dev_dbg(&ts->client->dev, "n_fingers: %u, state: %04x\n", n_fingers, finger_state); + /* Note: all fingers have the same tool type */ + tool_type = buf[FW_POS_TOOL_TYPE] & BIT(0) ? + MT_TOOL_FINGER : MT_TOOL_PALM; + for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) { if (finger_state & 1) { unsigned int x, y, p, w; @@ -867,7 +874,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf) i, x, y, p, w); input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_mt_report_slot_state(input, tool_type, true); input_event(input, EV_ABS, ABS_MT_POSITION_X, x); input_event(input, EV_ABS, ABS_MT_POSITION_Y, y); input_event(input, EV_ABS, ABS_MT_PRESSURE, p); @@ -1307,6 +1314,8 @@ static int elants_i2c_probe(struct i2c_client *client, input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0); input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(ts->input, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_PALM, 0, 0); input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res); input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res); input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1); -- cgit v1.2.3-58-ga151 From 3f8f770575d911c989043d8f0fb8dec96360c41c Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Thu, 9 Apr 2020 13:49:03 -0700 Subject: Input: mms114 - fix handling of mms345l MMS345L is another first generation touch screen from Melfas, which uses the same registers as MMS152. However, using I2C_M_NOSTART for it causes errors when reading: i2c i2c-0: sendbytes: NAK bailout. mms114 0-0048: __mms114_read_reg: i2c transfer failed (-5) The driver works fine as soon as I2C_M_NOSTART is removed. Reviewed-by: Andi Shyti Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200405170904.61512-1-stephan@gerhold.net [dtor: removed separate mms345l handling, made everyone use standard transfer mode, propagated the 10bit addressing flag to the read part of the transfer as well.] Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/mms114.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 69c6d559eeb0..2ef1adaed9af 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -91,15 +91,15 @@ static int __mms114_read_reg(struct mms114_data *data, unsigned int reg, if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL) BUG(); - /* Write register: use repeated start */ + /* Write register */ xfer[0].addr = client->addr; - xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART; + xfer[0].flags = client->flags & I2C_M_TEN; xfer[0].len = 1; xfer[0].buf = &buf; /* Read data */ xfer[1].addr = client->addr; - xfer[1].flags = I2C_M_RD; + xfer[1].flags = (client->flags & I2C_M_TEN) | I2C_M_RD; xfer[1].len = len; xfer[1].buf = val; @@ -428,10 +428,8 @@ static int mms114_probe(struct i2c_client *client, const void *match_data; int error; - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_PROTOCOL_MANGLING)) { - dev_err(&client->dev, - "Need i2c bus that supports protocol mangling\n"); + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "Not supported I2C adapter\n"); return -ENODEV; } -- cgit v1.2.3-58-ga151 From afcaf61be9d1dbdee5ec186d1dcc67b6b692180f Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 10 Apr 2020 17:06:01 +0800 Subject: xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_input For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index aa35f23c4912..8a202c44f89a 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -644,7 +644,7 @@ resume: dev_put(skb->dev); spin_lock(&x->lock); - if (nexthdr <= 0) { + if (nexthdr < 0) { if (nexthdr == -EBADMSG) { xfrm_audit_state_icvfail(x, skb, x->type->proto); -- cgit v1.2.3-58-ga151 From 06a0afcfe2f551ff755849ea2549b0d8409fd9a0 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 10 Apr 2020 17:06:31 +0800 Subject: xfrm: do pskb_pull properly in __xfrm_transport_prep For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- and in __xfrm_transport_prep(): pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len); it will pull the data pointer to the wrong position, as it missed the nexthdrs/dest opts. This patch is to fix it by using: pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len); as we can be sure transport_header points to ESP header at that moment. It also fixes a panic when packets with ipv6 nexthdr are sent over esp6 transport mode: [ 100.473845] kernel BUG at net/core/skbuff.c:4325! [ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260 [ 100.494355] Call Trace: [ 100.494829] skb_to_sgvec+0x11/0x40 [ 100.495492] esp6_output_tail+0x12e/0x550 [esp6] [ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload] [ 100.498029] validate_xmit_xfrm+0x22f/0x2e0 [ 100.499604] __dev_queue_xmit+0x589/0x910 [ 100.502928] ip6_finish_output2+0x2a5/0x5a0 [ 100.503718] ip6_output+0x6c/0x120 [ 100.505198] xfrm_output_resume+0x4bf/0x530 [ 100.508683] xfrm6_output+0x3a/0xc0 [ 100.513446] inet6_csk_xmit+0xa1/0xf0 [ 100.517335] tcp_sendmsg+0x27/0x40 [ 100.517977] sock_sendmsg+0x3e/0x60 [ 100.518648] __sys_sendto+0xee/0x160 Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_device.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/xfrm/xfrm_device.c b/net/xfrm/xfrm_device.c index 6cc7f7f1dd68..f50d1f97cf8e 100644 --- a/net/xfrm/xfrm_device.c +++ b/net/xfrm/xfrm_device.c @@ -25,12 +25,10 @@ static void __xfrm_transport_prep(struct xfrm_state *x, struct sk_buff *skb, struct xfrm_offload *xo = xfrm_offload(skb); skb_reset_mac_len(skb); - pskb_pull(skb, skb->mac_len + hsize + x->props.header_len); - - if (xo->flags & XFRM_GSO_SEGMENT) { - skb_reset_transport_header(skb); + if (xo->flags & XFRM_GSO_SEGMENT) skb->transport_header -= x->props.header_len; - } + + pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len); } static void __xfrm_mode_tunnel_prep(struct xfrm_state *x, struct sk_buff *skb, -- cgit v1.2.3-58-ga151 From 3c96ec56828922e3fe5477f75eb3fc02f98f98b5 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 10 Apr 2020 17:06:56 +0800 Subject: esp6: get the right proto for transport mode in esp6_gso_encap For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- What it wants to get for x-proto in esp6_gso_encap() is the proto that will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and get the real transport protocol. Othersize, the wrong proto number will be set into ESP nexthdr. This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr() in esp6_gso_encap(). Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv6/esp6_offload.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index 8eab2c869d61..b82850886574 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -123,9 +123,16 @@ static void esp6_gso_encap(struct xfrm_state *x, struct sk_buff *skb) struct ip_esp_hdr *esph; struct ipv6hdr *iph = ipv6_hdr(skb); struct xfrm_offload *xo = xfrm_offload(skb); - int proto = iph->nexthdr; + u8 proto = iph->nexthdr; skb_push(skb, -skb_network_offset(skb)); + + if (x->outer_mode.encap == XFRM_MODE_TRANSPORT) { + __be16 frag; + + ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &proto, &frag); + } + esph = ip_esp_hdr(skb); *skb_mac_header(skb) = IPPROTO_ESP; -- cgit v1.2.3-58-ga151 From 0bcee1191f3c3d6b8b2d422efce91a86e49db7ca Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Sat, 18 Apr 2020 13:50:08 -0700 Subject: Input: cros_ec_keyb - use cros_ec_cmd_xfer_status helper This patch makes use of cros_ec_cmd_xfer_status() instead of cros_ec_cmd_xfer(). In this case there is no advantage of doing this apart from that we want to make cros_ec_cmd_xfer() a private function for the EC protocol and let people only use the cros_ec_cmd_xfer_status() to return Linux standard error codes. Signed-off-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200414210434.1534982-1-enric.balletbo@collabora.com Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/cros_ec_keyb.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index 2b71c5a51f90..fc1793ca2f17 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -347,18 +347,14 @@ static int cros_ec_keyb_info(struct cros_ec_device *ec_dev, params->info_type = info_type; params->event_type = event_type; - ret = cros_ec_cmd_xfer(ec_dev, msg); - if (ret < 0) { - dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n", - (int)info_type, (int)event_type, ret); - } else if (msg->result == EC_RES_INVALID_VERSION) { + ret = cros_ec_cmd_xfer_status(ec_dev, msg); + if (ret == -ENOTSUPP) { /* With older ECs we just return 0 for everything */ memset(result, 0, result_size); ret = 0; - } else if (msg->result != EC_RES_SUCCESS) { - dev_warn(ec_dev->dev, "Error getting info %d/%d: %d\n", - (int)info_type, (int)event_type, msg->result); - ret = -EPROTO; + } else if (ret < 0) { + dev_warn(ec_dev->dev, "Transfer error %d/%d: %d\n", + (int)info_type, (int)event_type, ret); } else if (ret != result_size) { dev_warn(ec_dev->dev, "Wrong size %d/%d: %d != %zu\n", (int)info_type, (int)event_type, -- cgit v1.2.3-58-ga151 From e3b4f94ef52ae1592cbe199bd38dbdc0d58b2217 Mon Sep 17 00:00:00 2001 From: James Hilliard Date: Sat, 18 Apr 2020 21:17:12 -0700 Subject: Input: usbtouchscreen - add support for BonXeon TP Based on available information this uses the singletouch irtouch protocol. This is tested and confirmed to be fully functional on the BonXeon TP hardware I have. Signed-off-by: James Hilliard Link: https://lore.kernel.org/r/20200413184217.55700-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/usbtouchscreen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 16d70201de4a..397cb1d3f481 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -182,6 +182,7 @@ static const struct usb_device_id usbtouch_devices[] = { #endif #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + {USB_DEVICE(0x255e, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, {USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES}, -- cgit v1.2.3-58-ga151 From db87668ad1e4917cfe04e217307ba6ed9390716e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 10 Apr 2020 17:08:24 +0800 Subject: xfrm: remove the xfrm_state_put call becofe going to out_reset This xfrm_state_put call in esp4/6_gro_receive() will cause double put for state, as in out_reset path secpath_reset() will put all states set in skb sec_path. So fix it by simply remove the xfrm_state_put call. Fixes: 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv4/esp4_offload.c | 4 +--- net/ipv6/esp6_offload.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c index 731022cff600..231edcb84c08 100644 --- a/net/ipv4/esp4_offload.c +++ b/net/ipv4/esp4_offload.c @@ -63,10 +63,8 @@ static struct sk_buff *esp4_gro_receive(struct list_head *head, sp->olen++; xo = xfrm_offload(skb); - if (!xo) { - xfrm_state_put(x); + if (!xo) goto out_reset; - } } xo->flags |= XFRM_GRO; diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index b82850886574..b92372b104ba 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -85,10 +85,8 @@ static struct sk_buff *esp6_gro_receive(struct list_head *head, sp->olen++; xo = xfrm_offload(skb); - if (!xo) { - xfrm_state_put(x); + if (!xo) goto out_reset; - } } xo->flags |= XFRM_GRO; -- cgit v1.2.3-58-ga151 From 29e4276667e24ee6b91d9f91064d8fda9a210ea1 Mon Sep 17 00:00:00 2001 From: Antony Antony Date: Wed, 15 Apr 2020 21:47:10 +0200 Subject: xfrm: fix error in comment s/xfrm_state_offload/xfrm_user_offload/ Fixes: d77e38e612a ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Antony Antony Signed-off-by: Steffen Klassert --- include/uapi/linux/xfrm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/xfrm.h b/include/uapi/linux/xfrm.h index 5f3b9fec7b5f..ff7cfdc6cb44 100644 --- a/include/uapi/linux/xfrm.h +++ b/include/uapi/linux/xfrm.h @@ -304,7 +304,7 @@ enum xfrm_attr_type_t { XFRMA_PROTO, /* __u8 */ XFRMA_ADDRESS_FILTER, /* struct xfrm_address_filter */ XFRMA_PAD, - XFRMA_OFFLOAD_DEV, /* struct xfrm_state_offload */ + XFRMA_OFFLOAD_DEV, /* struct xfrm_user_offload */ XFRMA_SET_MARK, /* __u32 */ XFRMA_SET_MARK_MASK, /* __u32 */ XFRMA_IF_ID, /* __u32 */ -- cgit v1.2.3-58-ga151 From 9f0cadc32d738f0f0c8e30be83be7087c7b85ee5 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Thu, 16 Apr 2020 17:45:44 +0200 Subject: xfrm: espintcp: save and call old ->sk_destruct When ESP encapsulation is enabled on a TCP socket, I'm replacing the existing ->sk_destruct callback with espintcp_destruct. We still need to call the old callback to perform the other cleanups when the socket is destroyed. Save the old callback, and call it from espintcp_destruct. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert --- include/net/espintcp.h | 1 + net/xfrm/espintcp.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/include/net/espintcp.h b/include/net/espintcp.h index dd7026a00066..0335bbd76552 100644 --- a/include/net/espintcp.h +++ b/include/net/espintcp.h @@ -25,6 +25,7 @@ struct espintcp_ctx { struct espintcp_msg partial; void (*saved_data_ready)(struct sock *sk); void (*saved_write_space)(struct sock *sk); + void (*saved_destruct)(struct sock *sk); struct work_struct work; bool tx_running; }; diff --git a/net/xfrm/espintcp.c b/net/xfrm/espintcp.c index 037ea156d2f9..5a0ff665b71a 100644 --- a/net/xfrm/espintcp.c +++ b/net/xfrm/espintcp.c @@ -379,6 +379,7 @@ static void espintcp_destruct(struct sock *sk) { struct espintcp_ctx *ctx = espintcp_getctx(sk); + ctx->saved_destruct(sk); kfree(ctx); } @@ -419,6 +420,7 @@ static int espintcp_init_sk(struct sock *sk) sk->sk_socket->ops = &espintcp_ops; ctx->saved_data_ready = sk->sk_data_ready; ctx->saved_write_space = sk->sk_write_space; + ctx->saved_destruct = sk->sk_destruct; sk->sk_data_ready = espintcp_data_ready; sk->sk_write_space = espintcp_write_space; sk->sk_destruct = espintcp_destruct; -- cgit v1.2.3-58-ga151 From 18931506465a762ffd3f4803d36a18d336a67da9 Mon Sep 17 00:00:00 2001 From: Kevin Locke Date: Mon, 20 Apr 2020 10:02:19 -0700 Subject: Input: i8042 - add ThinkPad S230u to i8042 nomux list On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", whether booted in UEFI or Legacy/CSM mode the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring on BIOS 1.57 and later.[1][2][3][4][5] This model does not have an external PS/2 port, so mux does not appear to be useful. Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Adding 33474HU to the nomux list avoids the issue on my system. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/feb8a8339a67025dab3850e6377eb6f3a0e782ba.1587400635.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 08e919dbeb5d..5bbc9152731d 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -541,6 +541,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"), }, }, + { + /* Lenovo ThinkPad Twist S230u */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"), + }, + }, { } }; -- cgit v1.2.3-58-ga151 From 25a44ae93d1a490f36d88a180f11aa2650bef074 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 19 Apr 2020 16:10:00 +0800 Subject: esp6: support ipv6 nexthdrs process for beet gso segment For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP6 hdr| ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- Before doing gso segment in xfrm6_beet_gso_segment(), it should skip all nexthdrs and get the real transport proto, and set transport_header properly. This patch is to fix it by simply calling ipv6_skip_exthdr() in xfrm6_beet_gso_segment(). v1->v2: - remove skb_transport_offset(), as it will always return 0 in xfrm6_beet_gso_segment(), thank Sabrina's check. Fixes: 7f9e40eb18a9 ("esp6: add gso_segment for esp6 beet mode") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv6/esp6_offload.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index b92372b104ba..9c03460b2760 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -171,7 +171,7 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x, struct xfrm_offload *xo = xfrm_offload(skb); struct sk_buff *segs = ERR_PTR(-EINVAL); const struct net_offload *ops; - int proto = xo->proto; + u8 proto = xo->proto; skb->transport_header += x->props.header_len; @@ -182,7 +182,12 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x, proto = ph->nexthdr; } - if (x->sel.family != AF_INET6) { + if (x->sel.family == AF_INET6) { + __be16 frag; + + skb->transport_header += + ipv6_skip_exthdr(skb, 0, &proto, &frag); + } else { skb->transport_header -= (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); -- cgit v1.2.3-58-ga151 From 6f297068a0696eafecef13852408b05a81edb560 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 19 Apr 2020 16:11:02 +0800 Subject: esp4: support ipv6 nexthdrs process for beet gso segment For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- Before doing gso segment in xfrm4_beet_gso_segment(), the same thing is needed as it does in xfrm6_beet_gso_segment() in last patch 'esp6: support ipv6 nexthdrs process for beet gso segment'. v1->v2: - remove skb_transport_offset(), as it will always return 0 in xfrm6_beet_gso_segment(), thank Sabrina's check. Fixes: 384a46ea7bdc ("esp4: add gso_segment for esp4 beet mode") Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv4/esp4_offload.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c index 231edcb84c08..9b1d451edae0 100644 --- a/net/ipv4/esp4_offload.c +++ b/net/ipv4/esp4_offload.c @@ -137,7 +137,7 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x, struct xfrm_offload *xo = xfrm_offload(skb); struct sk_buff *segs = ERR_PTR(-EINVAL); const struct net_offload *ops; - int proto = xo->proto; + u8 proto = xo->proto; skb->transport_header += x->props.header_len; @@ -146,10 +146,15 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x, skb->transport_header += ph->hdrlen * 8; proto = ph->nexthdr; - } else if (x->sel.family != AF_INET6) { + } else if (x->sel.family == AF_INET6) { + __be16 frag; + + skb->transport_header += + ipv6_skip_exthdr(skb, 0, &proto, &frag); + if (proto == IPPROTO_TCP) + skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4; + } else { skb->transport_header -= IPV4_BEET_PHMAXLEN; - } else if (proto == IPPROTO_TCP) { - skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4; } __skb_pull(skb, skb_transport_offset(skb)); -- cgit v1.2.3-58-ga151 From a204aef9fd77dce1efd9066ca4e44eede99cd858 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 20 Apr 2020 21:51:09 +0800 Subject: xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output An use-after-free crash can be triggered when sending big packets over vxlan over esp with esp offload enabled: [] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] Call Trace: [] dump_stack+0x75/0xa0 [] kasan_report+0x37/0x50 [] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] ipv6_gso_segment+0x2c8/0x13c0 [] skb_mac_gso_segment+0x1cb/0x420 [] skb_udp_tunnel_segment+0x6b5/0x1c90 [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] esp4_gso_segment+0xae8/0x1709 [esp4_offload] [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] __skb_gso_segment+0x2d7/0x5f0 [] validate_xmit_skb+0x527/0xb10 [] __dev_queue_xmit+0x10f8/0x2320 <--- [] ip_finish_output2+0xa2e/0x1b50 [] ip_output+0x1a8/0x2f0 [] xfrm_output_resume+0x110e/0x15f0 [] __xfrm4_output+0xe1/0x1b0 [] xfrm4_output+0xa0/0x200 [] iptunnel_xmit+0x5a7/0x920 [] vxlan_xmit_one+0x1658/0x37a0 [vxlan] [] vxlan_xmit+0x5e4/0x3ec8 [vxlan] [] dev_hard_start_xmit+0x125/0x540 [] __dev_queue_xmit+0x17bd/0x2320 <--- [] ip6_finish_output2+0xb20/0x1b80 [] ip6_output+0x1b3/0x390 [] ip6_xmit+0xb82/0x17e0 [] inet6_csk_xmit+0x225/0x3d0 [] __tcp_transmit_skb+0x1763/0x3520 [] tcp_write_xmit+0xd64/0x5fe0 [] __tcp_push_pending_frames+0x8c/0x320 [] tcp_sendmsg_locked+0x2245/0x3500 [] tcp_sendmsg+0x27/0x40 As on the tx path of vxlan over esp, skb->inner_network_header would be set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can overwrite the former one. It causes skb_udp_tunnel_segment() to use a wrong skb->inner_network_header, then the issue occurs. This patch is to fix it by calling xfrm_output_gso() instead when the inner_protocol is set, in which gso_segment of inner_protocol will be done first. While at it, also improve some code around. Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Reported-by: Xiumei Mu Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_output.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index 2fd3d990d992..69c33cab8f49 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -583,18 +583,20 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb) xfrm_state_hold(x); if (skb_is_gso(skb)) { - skb_shinfo(skb)->gso_type |= SKB_GSO_ESP; + if (skb->inner_protocol) + return xfrm_output_gso(net, sk, skb); - return xfrm_output2(net, sk, skb); + skb_shinfo(skb)->gso_type |= SKB_GSO_ESP; + goto out; } if (x->xso.dev && x->xso.dev->features & NETIF_F_HW_ESP_TX_CSUM) goto out; + } else { + if (skb_is_gso(skb)) + return xfrm_output_gso(net, sk, skb); } - if (skb_is_gso(skb)) - return xfrm_output_gso(net, sk, skb); - if (skb->ip_summed == CHECKSUM_PARTIAL) { err = skb_checksum_help(skb); if (err) { -- cgit v1.2.3-58-ga151 From 09264098ff153f60866039d60b31d39b66f55a31 Mon Sep 17 00:00:00 2001 From: Brendan Shanks Date: Wed, 22 Apr 2020 13:45:12 -0700 Subject: Input: evdev - call input_flush_device() on release(), not flush() input_flush_device() should only be called once the struct file is being released and no open descriptors remain, but evdev_flush() was calling it whenever a file descriptor was closed. This caused uploaded force-feedback effects to be erased when a process did a dup()/close() on the event FD, called system(), etc. Call input_flush_device() from evdev_release() instead. Reported-by: Mathieu Maret Signed-off-by: Brendan Shanks Link: https://lore.kernel.org/r/20200421231003.7935-1-bshanks@codeweavers.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/evdev.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index cb6e3a5f509c..0d57e51b8ba1 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -326,20 +326,6 @@ static int evdev_fasync(int fd, struct file *file, int on) return fasync_helper(fd, file, on, &client->fasync); } -static int evdev_flush(struct file *file, fl_owner_t id) -{ - struct evdev_client *client = file->private_data; - struct evdev *evdev = client->evdev; - - mutex_lock(&evdev->mutex); - - if (evdev->exist && !client->revoked) - input_flush_device(&evdev->handle, file); - - mutex_unlock(&evdev->mutex); - return 0; -} - static void evdev_free(struct device *dev) { struct evdev *evdev = container_of(dev, struct evdev, dev); @@ -453,6 +439,10 @@ static int evdev_release(struct inode *inode, struct file *file) unsigned int i; mutex_lock(&evdev->mutex); + + if (evdev->exist && !client->revoked) + input_flush_device(&evdev->handle, file); + evdev_ungrab(evdev, client); mutex_unlock(&evdev->mutex); @@ -1310,7 +1300,6 @@ static const struct file_operations evdev_fops = { .compat_ioctl = evdev_ioctl_compat, #endif .fasync = evdev_fasync, - .flush = evdev_flush, .llseek = no_llseek, }; -- cgit v1.2.3-58-ga151 From 764f7f911bf72450c51eb74cbb262ad9933741d8 Mon Sep 17 00:00:00 2001 From: Łukasz Patron Date: Wed, 22 Apr 2020 14:13:09 -0700 Subject: Input: xpad - add custom init packet for Xbox One S controllers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sending [ 0x05, 0x20, 0x00, 0x0f, 0x06 ] packet for Xbox One S controllers fixes an issue where controller is stuck in Bluetooth mode and not sending any inputs. Signed-off-by: Łukasz Patron Reviewed-by: Cameron Gutman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200422075206.18229-1-priv.luk@gmail.com Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 6b40a1c68f9f..c77cdb3b62b5 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -458,6 +458,16 @@ static const u8 xboxone_fw2015_init[] = { 0x05, 0x20, 0x00, 0x01, 0x00 }; +/* + * This packet is required for Xbox One S (0x045e:0x02ea) + * and Xbox One Elite Series 2 (0x045e:0x0b00) pads to + * initialize the controller that was previously used in + * Bluetooth mode. + */ +static const u8 xboxone_s_init[] = { + 0x05, 0x20, 0x00, 0x0f, 0x06 +}; + /* * This packet is required for the Titanfall 2 Xbox One pads * (0x0e6f:0x0165) to finish initialization and for Hori pads @@ -516,6 +526,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = { XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init), XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init), XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init), + XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init), + XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1), XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), -- cgit v1.2.3-58-ga151 From 38347374ae3f1ec4df56dd688bd603a64e79a0ed Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 22 Apr 2020 13:58:42 -0700 Subject: Input: dlink-dir685-touchkeys - fix a typo in driver name According to the file name and Kconfig, a 'k' is missing in this driver name. It should be "dlink-dir685-touchkeys". Fixes: 131b3de7016b ("Input: add D-Link DIR-685 touchkeys driver") Signed-off-by: Christophe JAILLET Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20200412213937.5287-1-christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/dlink-dir685-touchkeys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c index b0ead7199c40..a69dcc3bd30c 100644 --- a/drivers/input/keyboard/dlink-dir685-touchkeys.c +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -143,7 +143,7 @@ MODULE_DEVICE_TABLE(of, dir685_tk_of_match); static struct i2c_driver dir685_tk_i2c_driver = { .driver = { - .name = "dlin-dir685-touchkeys", + .name = "dlink-dir685-touchkeys", .of_match_table = of_match_ptr(dir685_tk_of_match), }, .probe = dir685_tk_probe, -- cgit v1.2.3-58-ga151 From 976eba8ab596bab94b9714cd46d38d5c6a2c660d Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 21 Apr 2020 20:46:11 +0800 Subject: ip_vti: receive ipip packet by calling ip_tunnel_rcv In Commit dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel"), it tries to receive IPIP packets in vti by calling xfrm_input(). This case happens when a small packet or frag sent by peer is too small to get compressed. However, xfrm_input() will still get to the IPCOMP path where skb sec_path is set, but never dropped while it should have been done in vti_ipcomp4_protocol.cb_handler(vti_rcv_cb), as it's not an ipcomp4 packet. This will cause that the packet can never pass xfrm4_policy_check() in the upper protocol rcv functions. So this patch is to call ip_tunnel_rcv() to process IPIP packets instead. Fixes: dd9ee3444014 ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel") Reported-by: Xiumei Mu Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv4/ip_vti.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c index 1b4e6f298648..1dda7c155c48 100644 --- a/net/ipv4/ip_vti.c +++ b/net/ipv4/ip_vti.c @@ -93,7 +93,28 @@ static int vti_rcv_proto(struct sk_buff *skb) static int vti_rcv_tunnel(struct sk_buff *skb) { - return vti_rcv(skb, ip_hdr(skb)->saddr, true); + struct ip_tunnel_net *itn = net_generic(dev_net(skb->dev), vti_net_id); + const struct iphdr *iph = ip_hdr(skb); + struct ip_tunnel *tunnel; + + tunnel = ip_tunnel_lookup(itn, skb->dev->ifindex, TUNNEL_NO_KEY, + iph->saddr, iph->daddr, 0); + if (tunnel) { + struct tnl_ptk_info tpi = { + .proto = htons(ETH_P_IP), + }; + + if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) + goto drop; + if (iptunnel_pull_header(skb, 0, tpi.proto, false)) + goto drop; + return ip_tunnel_rcv(tunnel, skb, &tpi, NULL, false); + } + + return -EINVAL; +drop: + kfree_skb(skb); + return 0; } static int vti_rcv_cb(struct sk_buff *skb, int err) -- cgit v1.2.3-58-ga151 From c95c5f58b35ef995f66cb55547eee6093ab5fcb8 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Thu, 23 Apr 2020 00:06:45 +0200 Subject: xfrm interface: fix oops when deleting a x-netns interface Here is the steps to reproduce the problem: ip netns add foo ip netns add bar ip -n foo link add xfrmi0 type xfrm dev lo if_id 42 ip -n foo link set xfrmi0 netns bar ip netns del foo ip netns del bar Which results to: [ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI [ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1 [ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 186.689420] Workqueue: netns cleanup_net [ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface] [ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08 [ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286 [ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0 [ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000 [ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040 [ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80 [ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8 [ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000 [ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0 [ 186.700221] Call Trace: [ 186.700508] rollback_registered_many+0x32b/0x3fd [ 186.701058] ? __rtnl_unlock+0x20/0x3d [ 186.701494] ? arch_local_irq_save+0x11/0x17 [ 186.702012] unregister_netdevice_many+0x12/0x55 [ 186.702594] default_device_exit_batch+0x12b/0x150 [ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60 [ 186.703719] cleanup_net+0x17d/0x234 [ 186.704138] process_one_work+0x196/0x2e8 [ 186.704652] worker_thread+0x1a4/0x249 [ 186.705087] ? cancel_delayed_work+0x92/0x92 [ 186.705620] kthread+0x105/0x10f [ 186.706000] ? __kthread_bind_mask+0x57/0x57 [ 186.706501] ret_from_fork+0x35/0x40 [ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy [ 186.710423] ---[ end trace 463bba18105537e5 ]--- The problem is that x-netns xfrm interface are not removed when the link netns is removed. This causes later this oops when thoses interfaces are removed. Let's add a handler to remove all interfaces related to a netns when this netns is removed. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Christophe Gouault Signed-off-by: Nicolas Dichtel Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_interface.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index 3361e3ac5714..1e115cbf21d3 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -750,7 +750,28 @@ static struct rtnl_link_ops xfrmi_link_ops __read_mostly = { .get_link_net = xfrmi_get_link_net, }; +static void __net_exit xfrmi_exit_batch_net(struct list_head *net_exit_list) +{ + struct net *net; + LIST_HEAD(list); + + rtnl_lock(); + list_for_each_entry(net, net_exit_list, exit_list) { + struct xfrmi_net *xfrmn = net_generic(net, xfrmi_net_id); + struct xfrm_if __rcu **xip; + struct xfrm_if *xi; + + for (xip = &xfrmn->xfrmi[0]; + (xi = rtnl_dereference(*xip)) != NULL; + xip = &xi->next) + unregister_netdevice_queue(xi->dev, &list); + } + unregister_netdevice_many(&list); + rtnl_unlock(); +} + static struct pernet_operations xfrmi_net_ops = { + .exit_batch = xfrmi_exit_batch_net, .id = &xfrmi_net_id, .size = sizeof(struct xfrmi_net), }; -- cgit v1.2.3-58-ga151 From 19c26d90ff4ca08ef2a2fef23cc9c13cfbfd891e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 17 Apr 2020 11:21:57 +0200 Subject: gpio: mvebu: Fix probing for chips without PWM The PWM iomem resource is optional and its presence indicates whether the GPIO chip has a PWM or not, which is why mvebu_pwm_probe() returned successfully when the PWM resource was not present. With f51b18d92b66 the driver switched to devm_platform_ioremap_resource_byname() and its error return is propagated to the caller, so now a missing PWM resource leads to a probe error in the driver. To fix this explicitly test for the presence of the PWM resource and return successfully when it's not there. Do this check before the check for the clock is done (which GPIO chips without a PWM do not have). Also move the existing comment why the PWM resource is optional up to the actual check. Fixes: f51b18d92b66 ("gpio: mvebu: use devm_platform_ioremap_resource_byname()") Signed-off-by: Sascha Hauer Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mvebu.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index 3c9f4fb3d5a2..bd65114eb170 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -782,6 +782,15 @@ static int mvebu_pwm_probe(struct platform_device *pdev, "marvell,armada-370-gpio")) return 0; + /* + * There are only two sets of PWM configuration registers for + * all the GPIO lines on those SoCs which this driver reserves + * for the first two GPIO chips. So if the resource is missing + * we can't treat it as an error. + */ + if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm")) + return 0; + if (IS_ERR(mvchip->clk)) return PTR_ERR(mvchip->clk); @@ -804,12 +813,6 @@ static int mvebu_pwm_probe(struct platform_device *pdev, mvchip->mvpwm = mvpwm; mvpwm->mvchip = mvchip; - /* - * There are only two sets of PWM configuration registers for - * all the GPIO lines on those SoCs which this driver reserves - * for the first two GPIO chips. So if the resource is missing - * we can't treat it as an error. - */ mvpwm->membase = devm_platform_ioremap_resource_byname(pdev, "pwm"); if (IS_ERR(mvpwm->membase)) return PTR_ERR(mvpwm->membase); -- cgit v1.2.3-58-ga151 From f4dec2d6160976b14e54be9c3950ce0f52385741 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 27 Apr 2020 18:06:02 -0700 Subject: Revert "Input: i8042 - add ThinkPad S230u to i8042 nomux list" This reverts commit 18931506465a762ffd3f4803d36a18d336a67da9. From Kevin Locke: "... nomux only appeared to fix the issue because the controller continued working after warm reboots. After more thorough testing from both warm and cold start, I now believe the entry should be added to i8042_dmi_reset_table rather than i8042_dmi_nomux_table as i8042.reset=1 alone is sufficient to avoid the issue from both states while i8042.nomux is not." --- drivers/input/serio/i8042-x86ia64io.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5bbc9152731d..08e919dbeb5d 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -541,13 +541,6 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5738"), }, }, - { - /* Lenovo ThinkPad Twist S230u */ - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"), - }, - }, { } }; -- cgit v1.2.3-58-ga151 From 2712c91a54a1058d55c284152b4d93c979b67be6 Mon Sep 17 00:00:00 2001 From: Kevin Locke Date: Mon, 27 Apr 2020 18:07:20 -0700 Subject: Input: i8042 - add ThinkPad S230u to i8042 reset list On the Lenovo ThinkPad Twist S230u (3347-4HU) with BIOS version "GDETC1WW (1.81 ) 06/27/2019", the keyboard, Synaptics TouchPad, and TrackPoint either do not function or stop functioning a few minutes after boot. This problem has been noted before, perhaps only occurring with BIOS 1.57 and later.[1][2][3][4][5] Odds of a BIOS fix appear to be low: 1.57 was released over 6 years ago and although the [BIOS changelog] notes "Fixed an issue of UEFI touchpad/trackpoint/keyboard/touchscreen" in 1.58, it appears to be insufficient. Setting i8042.reset=1 or adding 33474HU to the reset list avoids the issue on my system from either warm or cold boot. [1]: https://bugs.launchpad.net/bugs/1210748 [2]: https://bbs.archlinux.org/viewtopic.php?pid=1360425 [3]: https://forums.linuxmint.com/viewtopic.php?f=46&t=41200 [4]: https://forums.linuxmint.com/viewtopic.php?f=49&t=157115 [5]: https://forums.lenovo.com/topic/findpost/27/1337119 [BIOS changelog]: https://download.lenovo.com/pccbbs/mobiles/gduj33uc.txt Signed-off-by: Kevin Locke Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/94f384b0f75f90f71425d7dce7ac82c59ddb87a8.1587702636.git.kevin@kevinlocke.name Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 08e919dbeb5d..7e048b557462 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -662,6 +662,13 @@ static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "P65xRP"), }, }, + { + /* Lenovo ThinkPad Twist S230u */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "33474HU"), + }, + }, { } }; -- cgit v1.2.3-58-ga151 From d5a5e5b5fa7b86c05bf073acc0ba98fa280174ec Mon Sep 17 00:00:00 2001 From: Evan Green Date: Mon, 27 Apr 2020 18:08:58 -0700 Subject: Input: synaptics-rmi4 - really fix attn_data use-after-free Fix a use-after-free noticed by running with KASAN enabled. If rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among others) will end up reading from drvdata->attn_data.data, which was freed and left dangling in rmi_irq_fn(). Commit 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") correctly identified and analyzed this bug. However the attempted fix only NULLed out a local variable, missing the fact that drvdata->attn_data is a struct, not a pointer. NULL out the correct pointer in the driver data to prevent the attention functions from copying from it. Fixes: 55edde9fff1a ("Input: synaptics-rmi4 - prevent UAF reported by KASAN") Fixes: b908d3cd812a ("Input: synaptics-rmi4 - allow to add attention data") Signed-off-by: Evan Green Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index 190b9974526b..c18e1a25bca6 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -205,7 +205,7 @@ static irqreturn_t rmi_irq_fn(int irq, void *dev_id) if (count) { kfree(attn_data.data); - attn_data.data = NULL; + drvdata->attn_data.data = NULL; } if (!kfifo_is_empty(&drvdata->attn_fifo)) -- cgit v1.2.3-58-ga151 From 5caab2da63207d6d631007f592f5219459e3454d Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 28 Apr 2020 16:09:53 -0700 Subject: Input: synaptics-rmi4 - fix error return code in rmi_driver_probe() Fix to return a negative error code from the input_register_device() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20200428134948.78343-1-weiyongjun1@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/rmi4/rmi_driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c index c18e1a25bca6..258d5fe3d395 100644 --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -1210,7 +1210,8 @@ static int rmi_driver_probe(struct device *dev) if (data->input) { rmi_driver_set_input_name(rmi_dev, data->input); if (!rmi_dev->xport->input) { - if (input_register_device(data->input)) { + retval = input_register_device(data->input); + if (retval) { dev_err(dev, "%s: Failed to register input device.\n", __func__); goto err_destroy_functions; -- cgit v1.2.3-58-ga151 From 2c962369d72f286659e6446919f88d69b943cb4d Mon Sep 17 00:00:00 2001 From: Łukasz Stelmach Date: Mon, 27 Apr 2020 20:36:11 +0100 Subject: ARM: 8970/1: decompressor: increase tag size MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The size field of the tag header structure is supposed to be set to the size of a tag structure including the header. Fixes: c772568788b5f0 ("ARM: add additional table to compressed kernel") Signed-off-by: Łukasz Stelmach Signed-off-by: Russell King --- arch/arm/boot/compressed/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index b247f399de71..f82b5962d97e 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -42,7 +42,7 @@ SECTIONS } .table : ALIGN(4) { _table_start = .; - LONG(ZIMAGE_MAGIC(2)) + LONG(ZIMAGE_MAGIC(4)) LONG(ZIMAGE_MAGIC(0x5a534c4b)) LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start)) LONG(ZIMAGE_MAGIC(_kernel_bss_size)) -- cgit v1.2.3-58-ga151 From 747ffc2fcf969eff9309d7f2d1d61cb8b9e1bb40 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 May 2020 13:03:54 +0100 Subject: ARM: uaccess: consolidate uaccess asm to asm/uaccess-asm.h Consolidate the user access assembly code to asm/uaccess-asm.h. This moves the csdb, check_uaccess, uaccess_mask_range_ptr, uaccess_enable, uaccess_disable, uaccess_save, uaccess_restore macros, and creates two new ones for exception entry and exit - uaccess_entry and uaccess_exit. This makes the uaccess_save and uaccess_restore macros private to asm/uaccess-asm.h. Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 75 +------------------------- arch/arm/include/asm/uaccess-asm.h | 106 +++++++++++++++++++++++++++++++++++++ arch/arm/kernel/entry-armv.S | 11 +--- arch/arm/kernel/entry-header.S | 9 ++-- 4 files changed, 112 insertions(+), 89 deletions(-) create mode 100644 arch/arm/include/asm/uaccess-asm.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 99929122dad7..3546d294d55f 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -18,11 +18,11 @@ #endif #include -#include #include #include #include #include +#include #define IOMEM(x) (x) @@ -446,79 +446,6 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .size \name , . - \name .endm - .macro csdb -#ifdef CONFIG_THUMB2_KERNEL - .inst.w 0xf3af8014 -#else - .inst 0xe320f014 -#endif - .endm - - .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req -#ifndef CONFIG_CPU_USE_DOMAINS - adds \tmp, \addr, #\size - 1 - sbcscc \tmp, \tmp, \limit - bcs \bad -#ifdef CONFIG_CPU_SPECTRE - movcs \addr, #0 - csdb -#endif -#endif - .endm - - .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req -#ifdef CONFIG_CPU_SPECTRE - sub \tmp, \limit, #1 - subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr - addhs \tmp, \tmp, #1 @ if (tmp >= 0) { - subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) } - movlo \addr, #0 @ if (tmp < 0) addr = NULL - csdb -#endif - .endm - - .macro uaccess_disable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - /* - * Whenever we re-enter userspace, the domains should always be - * set appropriately. - */ - mov \tmp, #DACR_UACCESS_DISABLE - mcr p15, 0, \tmp, c3, c0, 0 @ Set domain register - .if \isb - instr_sync - .endif -#endif - .endm - - .macro uaccess_enable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - /* - * Whenever we re-enter userspace, the domains should always be - * set appropriately. - */ - mov \tmp, #DACR_UACCESS_ENABLE - mcr p15, 0, \tmp, c3, c0, 0 - .if \isb - instr_sync - .endif -#endif - .endm - - .macro uaccess_save, tmp -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - mrc p15, 0, \tmp, c3, c0, 0 - str \tmp, [sp, #SVC_DACR] -#endif - .endm - - .macro uaccess_restore -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - ldr r0, [sp, #SVC_DACR] - mcr p15, 0, r0, c3, c0, 0 -#endif - .endm - .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo .macro ret\c, reg #if __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h new file mode 100644 index 000000000000..d475e3e8145d --- /dev/null +++ b/arch/arm/include/asm/uaccess-asm.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_UACCESS_ASM_H__ +#define __ASM_UACCESS_ASM_H__ + +#include +#include +#include +#include + + .macro csdb +#ifdef CONFIG_THUMB2_KERNEL + .inst.w 0xf3af8014 +#else + .inst 0xe320f014 +#endif + .endm + + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcscc \tmp, \tmp, \limit + bcs \bad +#ifdef CONFIG_CPU_SPECTRE + movcs \addr, #0 + csdb +#endif +#endif + .endm + + .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req +#ifdef CONFIG_CPU_SPECTRE + sub \tmp, \limit, #1 + subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr + addhs \tmp, \tmp, #1 @ if (tmp >= 0) { + subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) } + movlo \addr, #0 @ if (tmp < 0) addr = NULL + csdb +#endif + .endm + + .macro uaccess_disable, tmp, isb=1 +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Whenever we re-enter userspace, the domains should always be + * set appropriately. + */ + mov \tmp, #DACR_UACCESS_DISABLE + mcr p15, 0, \tmp, c3, c0, 0 @ Set domain register + .if \isb + instr_sync + .endif +#endif + .endm + + .macro uaccess_enable, tmp, isb=1 +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Whenever we re-enter userspace, the domains should always be + * set appropriately. + */ + mov \tmp, #DACR_UACCESS_ENABLE + mcr p15, 0, \tmp, c3, c0, 0 + .if \isb + instr_sync + .endif +#endif + .endm + + .macro uaccess_save, tmp +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + mrc p15, 0, \tmp, c3, c0, 0 + str \tmp, [sp, #SVC_DACR] +#endif + .endm + + .macro uaccess_restore +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + ldr r0, [sp, #SVC_DACR] + mcr p15, 0, r0, c3, c0, 0 +#endif + .endm + + /* + * Save the address limit on entry to a privileged exception and + * if using PAN, save and disable usermode access. + */ + .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable + ldr \tmp0, [\tsk, #TI_ADDR_LIMIT] + mov \tmp1, #TASK_SIZE + str \tmp1, [\tsk, #TI_ADDR_LIMIT] + str \tmp0, [sp, #SVC_ADDR_LIMIT] + uaccess_save \tmp0 + .if \disable + uaccess_disable \tmp0 + .endif + .endm + + /* Restore the user access state previously saved by uaccess_entry */ + .macro uaccess_exit, tsk, tmp0, tmp1 + ldr \tmp1, [sp, #SVC_ADDR_LIMIT] + uaccess_restore + str \tmp1, [\tsk, #TI_ADDR_LIMIT] + .endm + +#endif /* __ASM_UACCESS_ASM_H__ */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 77f54830554c..55a47df04773 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -27,6 +27,7 @@ #include #include #include +#include #include "entry-header.S" #include @@ -179,15 +180,7 @@ ENDPROC(__und_invalid) stmia r7, {r2 - r6} get_thread_info tsk - ldr r0, [tsk, #TI_ADDR_LIMIT] - mov r1, #TASK_SIZE - str r1, [tsk, #TI_ADDR_LIMIT] - str r0, [sp, #SVC_ADDR_LIMIT] - - uaccess_save r0 - .if \uaccess - uaccess_disable r0 - .endif + uaccess_entry tsk, r0, r1, r2, \uaccess .if \trace #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 32051ec5b33f..40db0f9188b6 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -6,6 +6,7 @@ #include #include #include +#include #include @ Bad Abort numbers @@ -217,9 +218,7 @@ blne trace_hardirqs_off #endif .endif - ldr r1, [sp, #SVC_ADDR_LIMIT] - uaccess_restore - str r1, [tsk, #TI_ADDR_LIMIT] + uaccess_exit tsk, r0, r1 #ifndef CONFIG_THUMB2_KERNEL @ ARM mode SVC restore @@ -263,9 +262,7 @@ @ on the stack remains correct). @ .macro svc_exit_via_fiq - ldr r1, [sp, #SVC_ADDR_LIMIT] - uaccess_restore - str r1, [tsk, #TI_ADDR_LIMIT] + uaccess_exit tsk, r0, r1 #ifndef CONFIG_THUMB2_KERNEL @ ARM mode restore mov r0, sp -- cgit v1.2.3-58-ga151 From 8ede890b0bcebe8c760aacfe20e934d98c3dc6aa Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 May 2020 13:14:09 +0100 Subject: ARM: uaccess: integrate uaccess_save and uaccess_restore Integrate uaccess_save / uaccess_restore macros into the new uaccess_entry / uaccess_exit macros respectively. Signed-off-by: Russell King --- arch/arm/include/asm/uaccess-asm.h | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h index d475e3e8145d..e46468b91eaa 100644 --- a/arch/arm/include/asm/uaccess-asm.h +++ b/arch/arm/include/asm/uaccess-asm.h @@ -67,30 +67,23 @@ #endif .endm - .macro uaccess_save, tmp #ifdef CONFIG_CPU_SW_DOMAIN_PAN - mrc p15, 0, \tmp, c3, c0, 0 - str \tmp, [sp, #SVC_DACR] -#endif - .endm - - .macro uaccess_restore -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - ldr r0, [sp, #SVC_DACR] - mcr p15, 0, r0, c3, c0, 0 +#define DACR(x...) x +#else +#define DACR(x...) #endif - .endm /* * Save the address limit on entry to a privileged exception and * if using PAN, save and disable usermode access. */ .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable - ldr \tmp0, [\tsk, #TI_ADDR_LIMIT] - mov \tmp1, #TASK_SIZE - str \tmp1, [\tsk, #TI_ADDR_LIMIT] - str \tmp0, [sp, #SVC_ADDR_LIMIT] - uaccess_save \tmp0 + ldr \tmp1, [\tsk, #TI_ADDR_LIMIT] + mov \tmp2, #TASK_SIZE + str \tmp2, [\tsk, #TI_ADDR_LIMIT] + DACR( mrc p15, 0, \tmp0, c3, c0, 0) + DACR( str \tmp0, [sp, #SVC_DACR]) + str \tmp1, [sp, #SVC_ADDR_LIMIT] .if \disable uaccess_disable \tmp0 .endif @@ -99,8 +92,11 @@ /* Restore the user access state previously saved by uaccess_entry */ .macro uaccess_exit, tsk, tmp0, tmp1 ldr \tmp1, [sp, #SVC_ADDR_LIMIT] - uaccess_restore + DACR( ldr \tmp0, [sp, #SVC_DACR]) str \tmp1, [\tsk, #TI_ADDR_LIMIT] + DACR( mcr p15, 0, \tmp0, c3, c0, 0) .endm +#undef DACR + #endif /* __ASM_UACCESS_ASM_H__ */ -- cgit v1.2.3-58-ga151 From 71f8af1110101facfad68989ff91f88f8e2c3e22 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 May 2020 13:24:07 +0100 Subject: ARM: uaccess: fix DACR mismatch with nested exceptions Tomas Paukrt reports that his SAM9X60 based system (ARM926, ARMv5TJ) fails to fix up alignment faults, eventually resulting in a kernel oops. The problem occurs when using CONFIG_CPU_USE_DOMAINS with commit e6978e4bf181 ("ARM: save and reset the address limit when entering an exception"). This is because the address limit is set back to TASK_SIZE on exception entry, and, although it is restored on exception exit, the domain register is not. Hence, this sequence can occur: interrupt pt_regs->addr_limit = addr_limit // USER_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER interrupt pt_regs->addr_limit = addr_limit // KERNEL_DS addr_limit = USER_DS alignment exception __probe_kernel_read() old_fs = get_fs() // USER_DS set_fs(KERNEL_DS) addr_limit = KERNEL_DS dacr.kernel = DOMAIN_MANAGER ... set_fs(old_fs) addr_limit = USER_DS dacr.kernel = DOMAIN_CLIENT ... addr_limit = pt_regs->addr_limit // KERNEL_DS interrupt returns At this point, addr_limit is correctly restored to KERNEL_DS for __probe_kernel_read() to continue execution, but dacr.kernel is not, it has been reset by the set_fs(old_fs) to DOMAIN_CLIENT. This would not have happened prior to the mentioned commit, because addr_limit would remain KERNEL_DS, so get_fs() would have returned KERNEL_DS, and so would correctly nest. This commit fixes the problem by also saving the DACR on exception entry if either CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_CPU_USE_DOMAINS are enabled, and resetting the DACR appropriately on exception entry to match addr_limit and PAN settings. Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Tomas Paukrt Signed-off-by: Russell King --- arch/arm/include/asm/uaccess-asm.h | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h index e46468b91eaa..907571fd05c6 100644 --- a/arch/arm/include/asm/uaccess-asm.h +++ b/arch/arm/include/asm/uaccess-asm.h @@ -67,15 +67,21 @@ #endif .endm -#ifdef CONFIG_CPU_SW_DOMAIN_PAN +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS) #define DACR(x...) x #else #define DACR(x...) #endif /* - * Save the address limit on entry to a privileged exception and - * if using PAN, save and disable usermode access. + * Save the address limit on entry to a privileged exception. + * + * If we are using the DACR for kernel access by the user accessors + * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain + * back to client mode, whether or not \disable is set. + * + * If we are using SW PAN, set the DACR user domain to no access + * if \disable is set. */ .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable ldr \tmp1, [\tsk, #TI_ADDR_LIMIT] @@ -84,8 +90,17 @@ DACR( mrc p15, 0, \tmp0, c3, c0, 0) DACR( str \tmp0, [sp, #SVC_DACR]) str \tmp1, [sp, #SVC_ADDR_LIMIT] - .if \disable - uaccess_disable \tmp0 + .if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN) + /* kernel=client, user=no access */ + mov \tmp2, #DACR_UACCESS_DISABLE + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync + .elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS) + /* kernel=client */ + bic \tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL) + orr \tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT) + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync .endif .endm -- cgit v1.2.3-58-ga151 From 333830aa149a87cabeb5d30fbcf12eecc8040d2c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 29 Apr 2020 15:56:54 +0200 Subject: gpio: exar: Fix bad handling for ida_simple_get error path The commit 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") added a goto jump to the common error handler for ida_simple_get() error, but this is wrong in two ways: it doesn't set the proper return code and, more badly, it invokes ida_simple_remove() with a negative index that shall lead to a kernel panic via BUG_ON(). This patch addresses those two issues. Fixes: 7ecced0934e5 ("gpio: exar: add a check for the return value of ida_simple_get fails") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-exar.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c index da1ef0b1c291..b1accfba017d 100644 --- a/drivers/gpio/gpio-exar.c +++ b/drivers/gpio/gpio-exar.c @@ -148,8 +148,10 @@ static int gpio_exar_probe(struct platform_device *pdev) mutex_init(&exar_gpio->lock); index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL); - if (index < 0) - goto err_destroy; + if (index < 0) { + ret = index; + goto err_mutex_destroy; + } sprintf(exar_gpio->name, "exar_gpio%d", index); exar_gpio->gpio_chip.label = exar_gpio->name; @@ -176,6 +178,7 @@ static int gpio_exar_probe(struct platform_device *pdev) err_destroy: ida_simple_remove(&ida_index, index); +err_mutex_destroy: mutex_destroy(&exar_gpio->lock); return ret; } -- cgit v1.2.3-58-ga151 From 18f423748b986c00216b6574c931d3d7581b393f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 5 May 2020 17:11:02 -0700 Subject: Input: lm8333 - update contact email The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20200502142639.18925-1-wsa@kernel.org Signed-off-by: Dmitry Torokhov --- include/linux/input/lm8333.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/input/lm8333.h b/include/linux/input/lm8333.h index 79f918c6e8c5..906da5fc06e0 100644 --- a/include/linux/input/lm8333.h +++ b/include/linux/input/lm8333.h @@ -1,6 +1,6 @@ /* * public include for LM8333 keypad driver - same license as driver - * Copyright (C) 2012 Wolfram Sang, Pengutronix + * Copyright (C) 2012 Wolfram Sang, Pengutronix */ #ifndef _LM8333_H -- cgit v1.2.3-58-ga151 From 9747070c11d6ae021ed7a8e96e2950ed46cd53a9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 5 May 2020 19:06:32 -0700 Subject: Input: axp20x-pek - always register interrupt handlers On some X86 devices we do not register an input-device, because the power-button is also handled by the soc_button_array (GPIO) input driver, and we want to avoid reporting power-button presses to userspace twice. Sofar when we did this we also did not register our interrupt handlers, since those were only necessary to report input events. But on at least 2 device models the Medion Akoya E1239T and the GPD win, the GPIO pin used by the soc_button_array driver for the power-button cannot wakeup the system from suspend. Why this does not work is not clear, I've tried comparing the value of all relevant registers on the Cherry Trail SoC, with those from models where this does work. I've checked: PMC registers: FUNC_DIS, FUNC_DIS2, SOIX_WAKE_EN, D3_STS_0, D3_STS_1, D3_STDBY_STS_0, D3_STDBY_STS_1; PMC ACPI I/O regs: PM1_STS_EN, GPE0a_EN and they all have identical contents in the working and non working cases. I suspect that the firmware either sets some unknown register to a value causing this, or that it turns off a power-plane which is necessary for GPIO wakeups to work during suspend. What does work on the Medion Akoya E1239T is letting the AXP288 wakeup the system on a power-button press (the GPD win has a different PMIC). Move the registering of the power-button press/release interrupt-handler from axp20x_pek_probe_input_device() to axp20x_pek_probe() so that the PMIC will wakeup the system on a power-button press, even if we do not register an input device. Signed-off-by: Hans de Goede Acked-by: Chen-Yu Tsai Link: https://lore.kernel.org/r/20200426155757.297087-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov --- drivers/input/misc/axp20x-pek.c | 72 +++++++++++++++++++++-------------------- 1 file changed, 37 insertions(+), 35 deletions(-) diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c index c8f87df93a50..9c6386b2af33 100644 --- a/drivers/input/misc/axp20x-pek.c +++ b/drivers/input/misc/axp20x-pek.c @@ -205,8 +205,11 @@ ATTRIBUTE_GROUPS(axp20x); static irqreturn_t axp20x_pek_irq(int irq, void *pwr) { - struct input_dev *idev = pwr; - struct axp20x_pek *axp20x_pek = input_get_drvdata(idev); + struct axp20x_pek *axp20x_pek = pwr; + struct input_dev *idev = axp20x_pek->input; + + if (!idev) + return IRQ_HANDLED; /* * The power-button is connected to ground so a falling edge (dbf) @@ -225,22 +228,9 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr) static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, struct platform_device *pdev) { - struct axp20x_dev *axp20x = axp20x_pek->axp20x; struct input_dev *idev; int error; - axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); - if (axp20x_pek->irq_dbr < 0) - return axp20x_pek->irq_dbr; - axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc, - axp20x_pek->irq_dbr); - - axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF"); - if (axp20x_pek->irq_dbf < 0) - return axp20x_pek->irq_dbf; - axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc, - axp20x_pek->irq_dbf); - axp20x_pek->input = devm_input_allocate_device(&pdev->dev); if (!axp20x_pek->input) return -ENOMEM; @@ -255,24 +245,6 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, input_set_drvdata(idev, axp20x_pek); - error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr, - axp20x_pek_irq, 0, - "axp20x-pek-dbr", idev); - if (error < 0) { - dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n", - axp20x_pek->irq_dbr, error); - return error; - } - - error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf, - axp20x_pek_irq, 0, - "axp20x-pek-dbf", idev); - if (error < 0) { - dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n", - axp20x_pek->irq_dbf, error); - return error; - } - error = input_register_device(idev); if (error) { dev_err(&pdev->dev, "Can't register input device: %d\n", @@ -280,8 +252,6 @@ static int axp20x_pek_probe_input_device(struct axp20x_pek *axp20x_pek, return error; } - device_init_wakeup(&pdev->dev, true); - return 0; } @@ -339,6 +309,18 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); + axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); + if (axp20x_pek->irq_dbr < 0) + return axp20x_pek->irq_dbr; + axp20x_pek->irq_dbr = regmap_irq_get_virq( + axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbr); + + axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF"); + if (axp20x_pek->irq_dbf < 0) + return axp20x_pek->irq_dbf; + axp20x_pek->irq_dbf = regmap_irq_get_virq( + axp20x_pek->axp20x->regmap_irqc, axp20x_pek->irq_dbf); + if (axp20x_pek_should_register_input(axp20x_pek, pdev)) { error = axp20x_pek_probe_input_device(axp20x_pek, pdev); if (error) @@ -347,6 +329,26 @@ static int axp20x_pek_probe(struct platform_device *pdev) axp20x_pek->info = (struct axp20x_info *)match->driver_data; + error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr, + axp20x_pek_irq, 0, + "axp20x-pek-dbr", axp20x_pek); + if (error < 0) { + dev_err(&pdev->dev, "Failed to request dbr IRQ#%d: %d\n", + axp20x_pek->irq_dbr, error); + return error; + } + + error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf, + axp20x_pek_irq, 0, + "axp20x-pek-dbf", axp20x_pek); + if (error < 0) { + dev_err(&pdev->dev, "Failed to request dbf IRQ#%d: %d\n", + axp20x_pek->irq_dbf, error); + return error; + } + + device_init_wakeup(&pdev->dev, true); + platform_set_drvdata(pdev, axp20x_pek); return 0; -- cgit v1.2.3-58-ga151 From 820f8a870f6575acda1bf7f1a03c701c43ed5d79 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 6 May 2020 22:11:24 +0300 Subject: ARM: dts: am57xx: fix networking on boards with ksz9031 phy Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on boards: am571x-idk am572x-idk am574x-idk am57xx-beagle-x15 All above boards have phy-mode = "rgmii" and this is worked before because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Cc: Oleksij Rempel Cc: Andrew Lunn Cc: Philippe Schenker Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Reviewed-by: Philippe Schenker Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am571x-idk.dts | 4 ++-- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ++-- arch/arm/boot/dts/am57xx-idk-common.dtsi | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 669559c9c95b..c13756fa0f55 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -190,13 +190,13 @@ &cpsw_port1 { phy-handle = <ðphy0_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <1>; }; &cpsw_port2 { phy-handle = <ðphy1_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index a813a0cf3ff3..565675354de4 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -433,13 +433,13 @@ &cpsw_emac0 { phy-handle = <&phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index aa5e55f98179..a3ff1237d1fa 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -408,13 +408,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; -- cgit v1.2.3-58-ga151 From 1f13aa4d5194cbbc7934012069c05a60fc697df9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 5 May 2020 13:54:36 +0100 Subject: ARM: 8973/1: Add missing newline terminator to kernel message Before commit 874f9c7da9a4acbc ("printk: create pr_ functions"), pr_*() calls without a trailing newline characters would be printed with a newline character appended, both on the console and in the output of the dmesg command. After that commit, no new line character is appended, and the output of the next pr_*() call of the same type may be appended: -No ATAGs? -hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. +No ATAGs?hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. While this commit has been reverted in commit a0cba2179ea4c182 ("Revert "printk: create pr_ functions""), it's still good practice to terminate kernel messages with newlines. Signed-off-by: Geert Uytterhoeven Signed-off-by: Russell King --- arch/arm/kernel/atags_proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c index 4247ebf4b893..3c2faf2bd124 100644 --- a/arch/arm/kernel/atags_proc.c +++ b/arch/arm/kernel/atags_proc.c @@ -42,7 +42,7 @@ static int __init init_atags_procfs(void) size_t size; if (tag->hdr.tag != ATAG_CORE) { - pr_info("No ATAGs?"); + pr_info("No ATAGs?\n"); return -EINVAL; } -- cgit v1.2.3-58-ga151 From 2de00450c0126ec8838f72157577578e85cae5d8 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 7 May 2020 18:12:44 +0300 Subject: ARM: dts: am437x: fix networking on boards with ksz9031 phy Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") the networking is broken on boards: am437x-gp-evm am437x-sk-evm am437x-idk-evm All above boards have phy-mode = "rgmii" and this is worked before, because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Cc: Oleksij Rempel Cc: Andrew Lunn Cc: Philippe Schenker Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Reviewed-by: Philippe Schenker Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- arch/arm/boot/dts/am437x-sk-evm.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 811c8cae315b..d692e3b2812a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -943,7 +943,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &elm { diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 9f66f96d09c9..a958f9ee4a5a 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -504,7 +504,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &rtc { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 25222497f828..4d5a7ca2e25d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -833,13 +833,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; -- cgit v1.2.3-58-ga151 From d34fced41e172fae2df7819b1d5a398c62067599 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 7 May 2020 12:29:54 -0700 Subject: Input: applespi - replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20200507185347.GA14499@embeddedor Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/applespi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c index d38398526965..14362ebab9a9 100644 --- a/drivers/input/keyboard/applespi.c +++ b/drivers/input/keyboard/applespi.c @@ -186,7 +186,7 @@ struct touchpad_protocol { u8 number_of_fingers; u8 clicked2; u8 unknown3[16]; - struct tp_finger fingers[0]; + struct tp_finger fingers[]; }; /** -- cgit v1.2.3-58-ga151 From fb6823a6f9801dbe86b6551103f477dd3c5d115a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 13 May 2020 08:56:26 -0700 Subject: ARM: dts: Fix wrong mdio clock for dm814x Recent PTP-specific cpsw driver changes started exposing an issue on at at least j5eco-evm: Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0169004 ... (davinci_mdio_runtime_suspend) from [] (__rpm_callback+0x84/0x154) (__rpm_callback) from [] (rpm_callback+0x20/0x80) (rpm_callback) from [] (rpm_suspend+0xfc/0x6ac) (rpm_suspend) from [] (pm_runtime_work+0x88/0xa4) (pm_runtime_work) from [] (process_one_work+0x228/0x568) ... Let's fix the issue by using the correct mdio clock as suggested by Grygorii Strashko . The DM814_ETHERNET_CPGMAC0_CLKCTRL clock is the interconnect target module clock and managed by ti-sysc. Fixes: 6398f3478e45 ("ARM: dts: Configure interconnect target module for dm814x cpsw") Cc: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm814x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 44ed5a798164..c28ca0540f03 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -693,7 +693,7 @@ davinci_mdio: mdio@800 { compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; - clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clocks = <&cpsw_125mhz_gclk>; clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-58-ga151 From 9fefca775c8ddbbbcd97f2860218188b8641819d Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Sat, 9 May 2020 16:08:13 +0200 Subject: gpiolib: notify user-space about line status changes after flags are set Currently we emit the REQUESTED line state event after the line is requested but before the flags are configured. This is obviously wrong as we want to pass the updated lineinfo to user-space together with the event. Since the flags can be configured in different ways depending on how the line is being requested - we need to call the notifier chain in different places separately. Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index bf9732ab7f91..66cb3ca40184 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -729,6 +729,10 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) if (ret) goto out_free_descs; } + + atomic_notifier_call_chain(&desc->gdev->notifier, + GPIOLINE_CHANGED_REQUESTED, desc); + dev_dbg(&gdev->dev, "registered chardev handle for line %d\n", offset); } @@ -1083,6 +1087,9 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) if (ret) goto out_free_desc; + atomic_notifier_call_chain(&desc->gdev->notifier, + GPIOLINE_CHANGED_REQUESTED, desc); + le->irq = gpiod_to_irq(desc); if (le->irq <= 0) { ret = -ENODEV; @@ -2998,8 +3005,6 @@ static int gpiod_request_commit(struct gpio_desc *desc, const char *label) } done: spin_unlock_irqrestore(&gpio_lock, flags); - atomic_notifier_call_chain(&desc->gdev->notifier, - GPIOLINE_CHANGED_REQUESTED, desc); return ret; } @@ -4961,6 +4966,9 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev, return ERR_PTR(ret); } + atomic_notifier_call_chain(&desc->gdev->notifier, + GPIOLINE_CHANGED_REQUESTED, desc); + return desc; } EXPORT_SYMBOL_GPL(gpiod_get_index); @@ -5026,6 +5034,9 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode, return ERR_PTR(ret); } + atomic_notifier_call_chain(&desc->gdev->notifier, + GPIOLINE_CHANGED_REQUESTED, desc); + return desc; } EXPORT_SYMBOL_GPL(fwnode_get_named_gpiod); -- cgit v1.2.3-58-ga151 From 56b1b7c667fbb9ee395f7506dfef3c04571e024a Mon Sep 17 00:00:00 2001 From: Xin Long Date: Wed, 13 May 2020 18:38:54 +0800 Subject: esp6: calculate transport_header correctly when sel.family != AF_INET6 In esp6_init_state() for beet mode when x->sel.family != AF_INET6: x->props.header_len = sizeof(struct ip_esp_hdr) + crypto_aead_ivsize(aead) + IPV4_BEET_PHMAXLEN + (sizeof(struct ipv6hdr) - sizeof(struct iphdr)) In xfrm6_beet_gso_segment() skb->transport_header is supposed to move to the end of the ph header for IPPROTO_BEETPH, so if x->sel.family != AF_INET6 and it's IPPROTO_BEETPH, it should do: skb->transport_header -= (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); skb->transport_header += ph->hdrlen * 8; And IPV4_BEET_PHMAXLEN is only reserved for PH header, so if x->sel.family != AF_INET6 and it's not IPPROTO_BEETPH, it should do: skb->transport_header -= (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); skb->transport_header -= IPV4_BEET_PHMAXLEN; Thanks Sabrina for looking deep into this issue. Fixes: 7f9e40eb18a9 ("esp6: add gso_segment for esp6 beet mode") Reported-by: Sabrina Dubroca Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv6/esp6_offload.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/net/ipv6/esp6_offload.c b/net/ipv6/esp6_offload.c index 9c03460b2760..ab0eea336c70 100644 --- a/net/ipv6/esp6_offload.c +++ b/net/ipv6/esp6_offload.c @@ -175,24 +175,27 @@ static struct sk_buff *xfrm6_beet_gso_segment(struct xfrm_state *x, skb->transport_header += x->props.header_len; - if (proto == IPPROTO_BEETPH) { - struct ip_beet_phdr *ph = (struct ip_beet_phdr *)skb->data; + if (x->sel.family != AF_INET6) { + skb->transport_header -= + (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); - skb->transport_header += ph->hdrlen * 8; - proto = ph->nexthdr; - } + if (proto == IPPROTO_BEETPH) { + struct ip_beet_phdr *ph = + (struct ip_beet_phdr *)skb->data; + + skb->transport_header += ph->hdrlen * 8; + proto = ph->nexthdr; + } else { + skb->transport_header -= IPV4_BEET_PHMAXLEN; + } - if (x->sel.family == AF_INET6) { + if (proto == IPPROTO_TCP) + skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV6; + } else { __be16 frag; skb->transport_header += ipv6_skip_exthdr(skb, 0, &proto, &frag); - } else { - skb->transport_header -= - (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); - - if (proto == IPPROTO_TCP) - skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV6; } __skb_pull(skb, skb_transport_offset(skb)); -- cgit v1.2.3-58-ga151 From 3b1f6c5e4dfaf767f6f2f120cd93b347b5a9f1aa Mon Sep 17 00:00:00 2001 From: Hsin-Yi Wang Date: Mon, 4 May 2020 20:44:43 +0800 Subject: arm64: dts: mt8173: fix vcodec-enc clock Fix the assigned-clock-parents to higher frequency clock to avoid h264 encode timeout: [ 134.763465] mtk_vpu 10020000.vpu: vpu ipi 4 ack time out ! [ 134.769008] [MTK_VCODEC][ERROR][18]: vpu_enc_send_msg() vpu_ipi_send msg_id c002 len 32 fail -5 [ 134.777707] [MTK_VCODEC][ERROR][18]: vpu_enc_encode() AP_IPIMSG_ENC_ENCODE 0 fail venc_sel is the clock used by h264 encoder, and venclt_sel is the clock used by vp8 encoder. Assign venc_sel to vcodecpll_ck and venclt_sel to vcodecpll_370p5. vcodecpll 1482000000 vcodecpll_ck 494000000 venc_sel 494000000 ... vcodecpll_370p5 370500000 venclt_sel 370500000 Fixes: fbbad0287cec ("arm64: dts: Using standard CCF interface to set vcodec clk") Signed-off-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200504124442.208004-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index ccb8e88a60c5..d819e44d94a8 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1402,8 +1402,8 @@ "venc_lt_sel"; assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>, <&topckgen CLK_TOP_VENC_LT_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>, - <&topckgen CLK_TOP_UNIVPLL1_D2>; + assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; }; jpegdec: jpegdec@18004000 { -- cgit v1.2.3-58-ga151 From 34c4e4072603ff5c174df73b973896abb76cbb51 Mon Sep 17 00:00:00 2001 From: Dennis YC Hsieh Date: Sun, 8 Mar 2020 18:52:47 +0800 Subject: soc: mediatek: cmdq: return send msg error code Return error code to client if send message fail, so that client has chance to error handling. Fixes: 576f1b4bc802 ("soc: mediatek: Add Mediatek CMDQ helper") Signed-off-by: Dennis YC Hsieh Reviewed-by: CK Hu Link: https://lore.kernel.org/r/1583664775-19382-6-git-send-email-dennis-yc.hsieh@mediatek.com Signed-off-by: Matthias Brugger --- drivers/soc/mediatek/mtk-cmdq-helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c index db37144ae98c..87ee9f767b7a 100644 --- a/drivers/soc/mediatek/mtk-cmdq-helper.c +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c @@ -351,7 +351,9 @@ int cmdq_pkt_flush_async(struct cmdq_pkt *pkt, cmdq_async_flush_cb cb, spin_unlock_irqrestore(&client->lock, flags); } - mbox_send_message(client->chan, pkt); + err = mbox_send_message(client->chan, pkt); + if (err < 0) + return err; /* We can send next packet immediately, so just call txdone. */ mbox_client_txdone(client->chan, 0); -- cgit v1.2.3-58-ga151 From a53bcc19876498bdd3b4ef796c787295dcc498b4 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sat, 16 May 2020 23:50:49 +0200 Subject: gpu/drm: ingenic: Fix bogus crtc_atomic_check callback The code was comparing the SoC's maximum height with the mode's width, and vice-versa. D'oh. Cc: stable@vger.kernel.org # v5.6 Fixes: a7c909b7c037 ("gpu/drm: ingenic: Check for display size in CRTC atomic check") Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20200516215057.392609-4-paul@crapouillou.net Acked-by: Sam Ravnborg --- drivers/gpu/drm/ingenic/ingenic-drm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c index 1754c0547069..a5ad6a4353e1 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c @@ -328,8 +328,8 @@ static int ingenic_drm_crtc_atomic_check(struct drm_crtc *crtc, if (!drm_atomic_crtc_needs_modeset(state)) return 0; - if (state->mode.hdisplay > priv->soc_info->max_height || - state->mode.vdisplay > priv->soc_info->max_width) + if (state->mode.hdisplay > priv->soc_info->max_width || + state->mode.vdisplay > priv->soc_info->max_height) return -EINVAL; rate = clk_round_rate(priv->pix_clk, -- cgit v1.2.3-58-ga151 From abf56fadf0e208abfb13ad1ac0094416058da0ad Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sat, 16 May 2020 23:50:50 +0200 Subject: gpu/drm: Ingenic: Fix opaque pointer casted to wrong type The opaque pointer passed to the IRQ handler is a pointer to the drm_device, not a pointer to our ingenic_drm structure. It still worked, because our ingenic_drm structure contains the drm_device as its first field, so the pointer received had the same value, but this was not semantically correct. Cc: stable@vger.kernel.org # v5.3 Fixes: 90b86fcc47b4 ("DRM: Add KMS driver for the Ingenic JZ47xx SoCs") Signed-off-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20200516215057.392609-5-paul@crapouillou.net Acked-by: Sam Ravnborg --- drivers/gpu/drm/ingenic/ingenic-drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.c b/drivers/gpu/drm/ingenic/ingenic-drm.c index a5ad6a4353e1..548cc25ea4ab 100644 --- a/drivers/gpu/drm/ingenic/ingenic-drm.c +++ b/drivers/gpu/drm/ingenic/ingenic-drm.c @@ -474,7 +474,7 @@ static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder, static irqreturn_t ingenic_drm_irq_handler(int irq, void *arg) { - struct ingenic_drm *priv = arg; + struct ingenic_drm *priv = drm_device_get_priv(arg); unsigned int state; regmap_read(priv->map, JZ_REG_LCD_STATE, &state); -- cgit v1.2.3-58-ga151 From 3ffb93ba326f40b47b17a4e8b3399c0fa2e8cee6 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 18 May 2020 13:35:19 +0800 Subject: esp4: improve xfrm4_beet_gso_segment() to be more readable This patch is to improve the code to make xfrm4_beet_gso_segment() more readable, and keep consistent with xfrm6_beet_gso_segment(). Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/ipv4/esp4_offload.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/net/ipv4/esp4_offload.c b/net/ipv4/esp4_offload.c index 9b1d451edae0..d14133eac476 100644 --- a/net/ipv4/esp4_offload.c +++ b/net/ipv4/esp4_offload.c @@ -141,20 +141,23 @@ static struct sk_buff *xfrm4_beet_gso_segment(struct xfrm_state *x, skb->transport_header += x->props.header_len; - if (proto == IPPROTO_BEETPH) { - struct ip_beet_phdr *ph = (struct ip_beet_phdr *)skb->data; - - skb->transport_header += ph->hdrlen * 8; - proto = ph->nexthdr; - } else if (x->sel.family == AF_INET6) { + if (x->sel.family != AF_INET6) { + if (proto == IPPROTO_BEETPH) { + struct ip_beet_phdr *ph = + (struct ip_beet_phdr *)skb->data; + + skb->transport_header += ph->hdrlen * 8; + proto = ph->nexthdr; + } else { + skb->transport_header -= IPV4_BEET_PHMAXLEN; + } + } else { __be16 frag; skb->transport_header += ipv6_skip_exthdr(skb, 0, &proto, &frag); if (proto == IPPROTO_TCP) skb_shinfo(skb)->gso_type |= SKB_GSO_TCPV4; - } else { - skb->transport_header -= IPV4_BEET_PHMAXLEN; } __skb_pull(skb, skb_transport_offset(skb)); -- cgit v1.2.3-58-ga151 From 2b17b8d7cc65d333a48c6d32ee44fc489cecb7d9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 18 May 2020 15:09:39 +0300 Subject: mmc: sdhci: Fix SDHCI_QUIRK_BROKEN_CQE Previous to commit 511ce378e16f07 ("mmc: Add MMC host software queue support"), removing MMC_CAP2_CQE was enough to disable command queuing, but now the cqe_ops must also be NULL otherwise ->cqe_enable() will be called. Fix SDHCI_QUIRK_BROKEN_CQE to do that. Signed-off-by: Adrian Hunter Fixes: 511ce378e16f07 ("mmc: Add MMC host software queue support") Link: https://lore.kernel.org/r/20200518120939.1399-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 3f716466fcfd..e368f2dabf20 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -4000,9 +4000,6 @@ int sdhci_setup_host(struct sdhci_host *host) mmc_hostname(mmc), host->version); } - if (host->quirks & SDHCI_QUIRK_BROKEN_CQE) - mmc->caps2 &= ~MMC_CAP2_CQE; - if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_SDMA; else if (!(host->caps & SDHCI_CAN_DO_SDMA)) @@ -4539,6 +4536,12 @@ int __sdhci_add_host(struct sdhci_host *host) struct mmc_host *mmc = host->mmc; int ret; + if ((mmc->caps2 & MMC_CAP2_CQE) && + (host->quirks & SDHCI_QUIRK_BROKEN_CQE)) { + mmc->caps2 &= ~MMC_CAP2_CQE; + mmc->cqe_ops = NULL; + } + host->complete_wq = alloc_workqueue("sdhci", flags, 0); if (!host->complete_wq) return -ENOMEM; -- cgit v1.2.3-58-ga151 From 3866f217aaa81bf7165c7f27362eee5d7919c496 Mon Sep 17 00:00:00 2001 From: Fredrik Strupe Date: Mon, 18 May 2020 19:41:11 +0100 Subject: ARM: 8977/1: ptrace: Fix mask for thumb breakpoint hook call_undef_hook() in traps.c applies the same instr_mask for both 16-bit and 32-bit thumb instructions. If instr_mask then is only 16 bits wide (0xffff as opposed to 0xffffffff), the first half-word of 32-bit thumb instructions will be masked out. This makes the function match 32-bit thumb instructions where the second half-word is equal to instr_val, regardless of the first half-word. The result in this case is that all undefined 32-bit thumb instructions with the second half-word equal to 0xde01 (udf #1) work as breakpoints and will raise a SIGTRAP instead of a SIGILL, instead of just the one intended 16-bit instruction. An example of such an instruction is 0xeaa0de01, which is unallocated according to Arm ARM and should raise a SIGILL, but instead raises a SIGTRAP. This patch fixes the issue by setting all the bits in instr_mask, which will still match the intended 16-bit thumb instruction (where the upper half is always 0), but not any 32-bit thumb instructions. Cc: Oleg Nesterov Signed-off-by: Fredrik Strupe Signed-off-by: Russell King --- arch/arm/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index b606cded90cd..4cc6a7eff635 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -219,8 +219,8 @@ static struct undef_hook arm_break_hook = { }; static struct undef_hook thumb_break_hook = { - .instr_mask = 0xffff, - .instr_val = 0xde01, + .instr_mask = 0xffffffff, + .instr_val = 0x0000de01, .cpsr_mask = PSR_T_BIT, .cpsr_val = PSR_T_BIT, .fn = break_trap, -- cgit v1.2.3-58-ga151 From a35cd6447effd5c239b564c80fa109d05ff3d114 Mon Sep 17 00:00:00 2001 From: Kaike Wan Date: Mon, 11 May 2020 23:13:28 -0400 Subject: IB/qib: Call kobject_put() when kobject_init_and_add() fails When kobject_init_and_add() returns an error in the function qib_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. In addition, the ppd->diagc_kobj is released along with other kobjects when the sysfs is unregistered. Fixes: f931551bafe1 ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters") Link: https://lore.kernel.org/r/20200512031328.189865.48627.stgit@awfm-01.aw.intel.com Cc: Suggested-by: Lin Yi Reviewed-by: Mike Marciniszyn Signed-off-by: Kaike Wan Signed-off-by: Dennis Dalessandro Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/qib/qib_sysfs.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c index 568b21eb6ea1..021df0654ba7 100644 --- a/drivers/infiniband/hw/qib/qib_sysfs.c +++ b/drivers/infiniband/hw/qib/qib_sysfs.c @@ -760,7 +760,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num, qib_dev_err(dd, "Skipping linkcontrol sysfs info, (err %d) port %u\n", ret, port_num); - goto bail; + goto bail_link; } kobject_uevent(&ppd->pport_kobj, KOBJ_ADD); @@ -770,7 +770,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num, qib_dev_err(dd, "Skipping sl2vl sysfs info, (err %d) port %u\n", ret, port_num); - goto bail_link; + goto bail_sl; } kobject_uevent(&ppd->sl2vl_kobj, KOBJ_ADD); @@ -780,7 +780,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num, qib_dev_err(dd, "Skipping diag_counters sysfs info, (err %d) port %u\n", ret, port_num); - goto bail_sl; + goto bail_diagc; } kobject_uevent(&ppd->diagc_kobj, KOBJ_ADD); @@ -793,7 +793,7 @@ int qib_create_port_files(struct ib_device *ibdev, u8 port_num, qib_dev_err(dd, "Skipping Congestion Control sysfs info, (err %d) port %u\n", ret, port_num); - goto bail_diagc; + goto bail_cc; } kobject_uevent(&ppd->pport_cc_kobj, KOBJ_ADD); @@ -854,6 +854,7 @@ void qib_verbs_unregister_sysfs(struct qib_devdata *dd) &cc_table_bin_attr); kobject_put(&ppd->pport_cc_kobj); } + kobject_put(&ppd->diagc_kobj); kobject_put(&ppd->sl2vl_kobj); kobject_put(&ppd->pport_kobj); } -- cgit v1.2.3-58-ga151 From 665e7c73a7724a393b4ec92d1ae1e029925ef2b7 Mon Sep 17 00:00:00 2001 From: Robert Beckett Date: Thu, 14 May 2020 19:02:37 +0200 Subject: ARM: dts/imx6q-bx50v3: Set display interface clock parents Avoid LDB and IPU DI clocks both using the same parent. LDB requires pasthrough clock to avoid breaking timing while IPU DI does not. Force IPU DI clocks to use IMX6QDL_CLK_PLL2_PFD0_352M as parent and LDB to use IMX6QDL_CLK_PLL5_VIDEO_DIV. This fixes an issue where attempting atomic modeset while using HDMI and display port at the same time causes LDB clock programming to destroy the programming of HDMI that was done during the same modeset. Cc: stable@vger.kernel.org Signed-off-by: Robert Beckett [Use IMX6QDL_CLK_PLL2_PFD0_352M instead of IMX6QDL_CLK_PLL2_PFD2_396M originally chosen by Robert Beckett to avoid affecting eMMC clock by DRM atomic updates] Signed-off-by: Ian Ray [Squash Robert's and Ian's commits for bisectability, update patch description and add stable tag] Signed-off-by: Sebastian Reichel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-b450v3.dts | 7 ------- arch/arm/boot/dts/imx6q-b650v3.dts | 7 ------- arch/arm/boot/dts/imx6q-b850v3.dts | 11 ----------- arch/arm/boot/dts/imx6q-bx50v3.dtsi | 15 +++++++++++++++ 4 files changed, 15 insertions(+), 25 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 95b8f2d71821..fb0980190aa0 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 611cb7ae7e55..8f762d9c5ae9 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index e4cb118f88c6..1ea64ecf4291 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -53,17 +53,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; -}; - &ldb { fsl,dual-channel; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index fa27dcdf06f1..1938b04199c4 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -377,3 +377,18 @@ #interrupt-cells = <1>; }; }; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; +}; -- cgit v1.2.3-58-ga151 From 58bb90ab415562eededb932455046924e65df342 Mon Sep 17 00:00:00 2001 From: Vincent Stehlé Date: Sat, 18 Apr 2020 14:35:22 +0200 Subject: ARM: dts: bcm2835-rpi-zero-w: Fix led polarity MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low. This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1]. [1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_ZeroW_1p1_reduced.pdf Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé Cc: Stefan Wahren Cc: Florian Fainelli Tested-by: Stefan Wahren Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 4c3f606e5b8d..f65448c01e31 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -24,7 +24,7 @@ leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; -- cgit v1.2.3-58-ga151 From be0ec060b54f0481fb95d59086c1484a949c903c Mon Sep 17 00:00:00 2001 From: Hamish Martin Date: Wed, 20 May 2020 16:30:42 +1200 Subject: ARM: dts: bcm: HR2: Fix PPI interrupt types These error messages are output when booting on a BCM HR2 system: GIC: PPI11 is secure or misconfigured GIC: PPI13 is secure or misconfigured Per ARM documentation these interrupts are triggered on a rising edge. See ARM Cortex A-9 MPCore Technical Reference Manual, Revision r4p1, Section 3.3.8 Interrupt Configuration Registers. The same issue was resolved for NSP systems in commit 5f1aa51c7a1e ("ARM: dts: NSP: Fix PPI interrupt types"). Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Hamish Martin Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-hr2.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 6142c672811e..5e5f5ca3c86f 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -75,7 +75,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = ; + interrupts = ; clocks = <&periph_clk>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -91,7 +91,7 @@ compatible = "arm,cortex-a9-twd-wdt"; reg = <0x20620 0x20>; interrupts = ; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; -- cgit v1.2.3-58-ga151 From ec7d12faf81de983efce8ff23f41c5d1bff14c41 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 19 Apr 2020 19:11:56 +0200 Subject: ARM: dts: mmp3: Use the MMP3 compatible string for /clocks Clocks are in fact slightly different on MMP3. In particular, PLL2 is fixed to a different frequency, there's an extra PLL3, and the GPU clocks are configured differently. Link: https://lore.kernel.org/r/20200419171157.672999-15-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Cc: Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 9b5087a95e73..9df03ba48b21 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -531,7 +531,7 @@ }; soc_clocks: clocks@d4050000 { - compatible = "marvell,mmp2-clock"; + compatible = "marvell,mmp3-clock"; reg = <0xd4050000 0x1000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; -- cgit v1.2.3-58-ga151 From 233cbffaa0b9ca874731efee67a11f005da1f87c Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 19 Apr 2020 19:11:57 +0200 Subject: ARM: dts: mmp3-dell-ariel: Fix the SPI devices I've managed to get about everything wrong while digging these out of OEM's board file. Correct the bus numbers, the exact model of the NOR flash, polarity of the chip selects and align the SPI frequency with the data sheet. Tested that it works now, with a slight fix to the PXA SSP driver. Link: https://lore.kernel.org/r/20200419171157.672999-16-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Cc: Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp3-dell-ariel.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index 15449c72c042..b0ec14c42164 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -98,19 +98,19 @@ status = "okay"; }; -&ssp3 { +&ssp1 { status = "okay"; - cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; firmware-flash@0 { - compatible = "st,m25p80", "jedec,spi-nor"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <40000000>; + spi-max-frequency = <104000000>; m25p,fast-read; }; }; -&ssp4 { - cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; +&ssp2 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; status = "okay"; }; -- cgit v1.2.3-58-ga151 From 24cf6eef79a7e85cfd2ef9dea52f769c9192fc6e Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 19 Apr 2020 19:11:55 +0200 Subject: ARM: dts: mmp3: Drop usb-nop-xceiv from HSIC phy "usb-nop-xceiv" is good enough if we don't lose the configuration done by the firmware, but we'd really prefer a real driver. Unfortunately, the PHY core is odd in that when the node is compatible with "usb-nop-xceiv", it ignores the other compatible strings. Let's just remove it. Signed-off-by: Lubomir Rintel Cc: Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp3.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 9df03ba48b21..826f0a577859 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -202,8 +202,7 @@ }; hsic_phy0: hsic-phy@f0001800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0001800 0x40>; #phy-cells = <0>; status = "disabled"; @@ -224,8 +223,7 @@ }; hsic_phy1: hsic-phy@f0002800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0002800 0x40>; #phy-cells = <0>; status = "disabled"; -- cgit v1.2.3-58-ga151 From 189277f3814c36133f4ff0352f4b5194a38486b6 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Thu, 21 May 2020 10:25:04 +0300 Subject: RDMA/mlx5: Fix NULL pointer dereference in destroy_prefetch_work q_deferred_work isn't initialized when creating an explicit ODP memory region. This can lead to a NULL pointer dereference when user performs asynchronous prefetch MR. Fix it by initializing q_deferred_work for explicit ODP. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 6074 Comm: kworker/u16:6 Not tainted 5.7.0-rc1-for-upstream-perf-2020-04-17_07-03-39-64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound mlx5_ib_prefetch_mr_work [mlx5_ib] RIP: 0010:__wake_up_common+0x49/0x120 Code: 04 89 54 24 0c 89 4c 24 08 74 0a 41 f6 01 04 0f 85 8e 00 00 00 48 8b 47 08 48 83 e8 18 4c 8d 67 08 48 8d 50 18 49 39 d4 74 66 <48> 8b 70 18 31 db 4c 8d 7e e8 eb 17 49 8b 47 18 48 8d 50 e8 49 8d RSP: 0000:ffffc9000097bd88 EFLAGS: 00010082 RAX: ffffffffffffffe8 RBX: ffff888454cd9f90 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff888454cd9f90 RBP: ffffc9000097bdd0 R08: 0000000000000000 R09: ffffc9000097bdd0 R10: 0000000000000000 R11: 0000000000000001 R12: ffff888454cd9f98 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff88846fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000044c19e002 CR4: 0000000000760ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __wake_up_common_lock+0x7a/0xc0 destroy_prefetch_work+0x5a/0x60 [mlx5_ib] mlx5_ib_prefetch_mr_work+0x64/0x80 [mlx5_ib] process_one_work+0x15b/0x360 worker_thread+0x49/0x3d0 kthread+0xf5/0x130 ? rescuer_thread+0x310/0x310 ? kthread_bind+0x10/0x10 ret_from_fork+0x1f/0x30 Fixes: de5ed007a03d ("IB/mlx5: Fix implicit ODP race") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200521072504.567406-1-leon@kernel.org Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index a401931189b7..44683073be0c 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1439,6 +1439,7 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if (is_odp_mr(mr)) { to_ib_umem_odp(mr->umem)->private = mr; + init_waitqueue_head(&mr->q_deferred_work); atomic_set(&mr->num_deferred_work, 0); err = xa_err(xa_store(&dev->odp_mkeys, mlx5_base_mkey(mr->mmkey.key), &mr->mmkey, -- cgit v1.2.3-58-ga151 From 9cb1fd0efd195590b828b9b865421ad345a4a145 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 May 2020 15:32:54 -0700 Subject: Linux 5.7-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 04f5662ae61a..f0d118b86287 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Kleptomaniac Octopus # *DOCUMENTATION* -- cgit v1.2.3-58-ga151 From e2d4a80f93fcfaf72e2e20daf6a28e39c3b90677 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Fri, 22 May 2020 19:04:13 +0200 Subject: mac80211: mesh: fix discovery timer re-arming issue / crash MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On a non-forwarding 802.11s link between two fairly busy neighboring nodes (iperf with -P 16 at ~850MBit/s TCP; 1733.3 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 4), so with frequent PREQ retries, usually after around 30-40 seconds the following crash would occur: [ 1110.822428] Unable to handle kernel read from unreadable memory at virtual address 00000000 [ 1110.830786] Mem abort info: [ 1110.833573] Exception class = IABT (current EL), IL = 32 bits [ 1110.839494] SET = 0, FnV = 0 [ 1110.842546] EA = 0, S1PTW = 0 [ 1110.845678] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800076386000 [ 1110.852204] [0000000000000000] *pgd=00000000f6322003, *pud=00000000f62de003, *pmd=0000000000000000 [ 1110.861167] Internal error: Oops: 86000004 [#1] PREEMPT SMP [ 1110.866730] Modules linked in: pppoe ppp_async batman_adv ath10k_pci ath10k_core ath pppox ppp_generic nf_conntrack_ipv6 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_FLOWOFFLOAD slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 usb_storage xhci_plat_hcd xhci_pci xhci_hcd dwc3 usbcore usb_common [ 1110.932190] Process swapper/3 (pid: 0, stack limit = 0xffff0000090c8000) [ 1110.938884] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.14.162 #0 [ 1110.944965] Hardware name: LS1043A RGW Board (DT) [ 1110.949658] task: ffff8000787a81c0 task.stack: ffff0000090c8000 [ 1110.955568] PC is at 0x0 [ 1110.958097] LR is at call_timer_fn.isra.27+0x24/0x78 [ 1110.963055] pc : [<0000000000000000>] lr : [] pstate: 00400145 [ 1110.970440] sp : ffff00000801be10 [ 1110.973744] x29: ffff00000801be10 x28: ffff000008bf7018 [ 1110.979047] x27: ffff000008bf87c8 x26: ffff000008c160c0 [ 1110.984352] x25: 0000000000000000 x24: 0000000000000000 [ 1110.989657] x23: dead000000000200 x22: 0000000000000000 [ 1110.994959] x21: 0000000000000000 x20: 0000000000000101 [ 1111.000262] x19: ffff8000787a81c0 x18: 0000000000000000 [ 1111.005565] x17: ffff0000089167b0 x16: 0000000000000058 [ 1111.010868] x15: ffff0000089167b0 x14: 0000000000000000 [ 1111.016172] x13: ffff000008916788 x12: 0000000000000040 [ 1111.021475] x11: ffff80007fda9af0 x10: 0000000000000001 [ 1111.026777] x9 : ffff00000801bea0 x8 : 0000000000000004 [ 1111.032080] x7 : 0000000000000000 x6 : ffff80007fda9aa8 [ 1111.037383] x5 : ffff00000801bea0 x4 : 0000000000000010 [ 1111.042685] x3 : ffff00000801be98 x2 : 0000000000000614 [ 1111.047988] x1 : 0000000000000000 x0 : 0000000000000000 [ 1111.053290] Call trace: [ 1111.055728] Exception stack(0xffff00000801bcd0 to 0xffff00000801be10) [ 1111.062158] bcc0: 0000000000000000 0000000000000000 [ 1111.069978] bce0: 0000000000000614 ffff00000801be98 0000000000000010 ffff00000801bea0 [ 1111.077798] bd00: ffff80007fda9aa8 0000000000000000 0000000000000004 ffff00000801bea0 [ 1111.085618] bd20: 0000000000000001 ffff80007fda9af0 0000000000000040 ffff000008916788 [ 1111.093437] bd40: 0000000000000000 ffff0000089167b0 0000000000000058 ffff0000089167b0 [ 1111.101256] bd60: 0000000000000000 ffff8000787a81c0 0000000000000101 0000000000000000 [ 1111.109075] bd80: 0000000000000000 dead000000000200 0000000000000000 0000000000000000 [ 1111.116895] bda0: ffff000008c160c0 ffff000008bf87c8 ffff000008bf7018 ffff00000801be10 [ 1111.124715] bdc0: ffff0000080ff29c ffff00000801be10 0000000000000000 0000000000400145 [ 1111.132534] bde0: ffff8000787a81c0 ffff00000801bde8 0000ffffffffffff 000001029eb19be8 [ 1111.140353] be00: ffff00000801be10 0000000000000000 [ 1111.145220] [< (null)>] (null) [ 1111.149917] [] run_timer_softirq+0x184/0x398 [ 1111.155741] [] __do_softirq+0x100/0x1fc [ 1111.161130] [] irq_exit+0x80/0xd8 [ 1111.166002] [] __handle_domain_irq+0x88/0xb0 [ 1111.171825] [] gic_handle_irq+0x68/0xb0 [ 1111.177213] Exception stack(0xffff0000090cbe30 to 0xffff0000090cbf70) [ 1111.183642] be20: 0000000000000020 0000000000000000 [ 1111.191461] be40: 0000000000000001 0000000000000000 00008000771af000 0000000000000000 [ 1111.199281] be60: ffff000008c95180 0000000000000000 ffff000008c19360 ffff0000090cbef0 [ 1111.207101] be80: 0000000000000810 0000000000000400 0000000000000098 ffff000000000000 [ 1111.214920] bea0: 0000000000000001 ffff0000089167b0 0000000000000000 ffff0000089167b0 [ 1111.222740] bec0: 0000000000000000 ffff000008c198e8 ffff000008bf7018 ffff000008c19000 [ 1111.230559] bee0: 0000000000000000 0000000000000000 ffff8000787a81c0 ffff000008018000 [ 1111.238380] bf00: ffff00000801c000 ffff00000913ba34 ffff8000787a81c0 ffff0000090cbf70 [ 1111.246199] bf20: ffff0000080857cc ffff0000090cbf70 ffff0000080857d0 0000000000400145 [ 1111.254020] bf40: ffff000008018000 ffff00000801c000 ffffffffffffffff ffff0000080fa574 [ 1111.261838] bf60: ffff0000090cbf70 ffff0000080857d0 [ 1111.266706] [] el1_irq+0xe8/0x18c [ 1111.271576] [] arch_cpu_idle+0x10/0x18 [ 1111.276880] [] do_idle+0xec/0x1b8 [ 1111.281748] [] cpu_startup_entry+0x20/0x28 [ 1111.287399] [] secondary_start_kernel+0x104/0x110 [ 1111.293662] Code: bad PC value [ 1111.296710] ---[ end trace 555b6ca4363c3edd ]--- [ 1111.301318] Kernel panic - not syncing: Fatal exception in interrupt [ 1111.307661] SMP: stopping secondary CPUs [ 1111.311574] Kernel Offset: disabled [ 1111.315053] CPU features: 0x0002000 [ 1111.318530] Memory Limit: none [ 1111.321575] Rebooting in 3 seconds.. With some added debug output / delays we were able to push the crash from the timer callback runner into the callback function and by that shedding some light on which object holding the timer gets corrupted: [ 401.720899] Unable to handle kernel read from unreadable memory at virtual address 00000868 [...] [ 402.335836] [] _raw_spin_lock_bh+0x14/0x48 [ 402.341548] [] mesh_path_timer+0x10c/0x248 [mac80211] [ 402.348154] [] call_timer_fn.isra.27+0x24/0x78 [ 402.354150] [] run_timer_softirq+0x184/0x398 [ 402.359974] [] __do_softirq+0x100/0x1fc [ 402.365362] [] irq_exit+0x80/0xd8 [ 402.370231] [] __handle_domain_irq+0x88/0xb0 [ 402.376053] [] gic_handle_irq+0x68/0xb0 The issue happens due to the following sequence of events: 1) mesh_path_start_discovery(): -> spin_unlock_bh(&mpath->state_lock) before mesh_path_sel_frame_tx() 2) mesh_path_free_rcu() -> del_timer_sync(&mpath->timer) [...] -> kfree_rcu(mpath) 3) mesh_path_start_discovery(): -> mod_timer(&mpath->timer, ...) [...] -> rcu_read_unlock() 4) mesh_path_free_rcu()'s kfree_rcu(): -> kfree(mpath) 5) mesh_path_timer() starts after timeout, using freed mpath object So a use-after-free issue due to a timer re-arming bug caused by an early spin-unlocking. This patch fixes this issue by re-checking if mpath is about to be free'd and if so bails out of re-arming the timer. Cc: stable@vger.kernel.org Fixes: 050ac52cbe1f ("mac80211: code for on-demand Hybrid Wireless Mesh Protocol") Cc: Simon Wunderlich Signed-off-by: Linus Lüssing Link: https://lore.kernel.org/r/20200522170413.14973-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 38a0383dfbcf..aa5150929996 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -1103,7 +1103,14 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata) mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->vif.addr, ifmsh->sn, target_flags, mpath->dst, mpath->sn, da, 0, ttl, lifetime, 0, ifmsh->preq_id++, sdata); + + spin_lock_bh(&mpath->state_lock); + if (mpath->flags & MESH_PATH_DELETED) { + spin_unlock_bh(&mpath->state_lock); + goto enddiscovery; + } mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout); + spin_unlock_bh(&mpath->state_lock); enddiscovery: rcu_read_unlock(); -- cgit v1.2.3-58-ga151 From d031781bdabe1027858a3220f868866586bf6e7c Mon Sep 17 00:00:00 2001 From: Pradeep Kumar Chitrapu Date: Wed, 6 May 2020 03:24:30 -0700 Subject: ieee80211: Fix incorrect mask for default PE duration Fixes bitmask for HE opration's default PE duration. Fixes: daa5b83513a7 ("mac80211: update HE operation fields to D3.0") Signed-off-by: Pradeep Kumar Chitrapu Link: https://lore.kernel.org/r/20200506102430.5153-1-pradeepc@codeaurora.org Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 16268ef1cbcc..5d3e48d02033 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2047,7 +2047,7 @@ ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info) } /* HE Operation defines */ -#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x00000003 +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x00000007 #define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000008 #define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x00003ff0 #define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 4 -- cgit v1.2.3-58-ga151 From 202500d21654874aa03243e91f96de153ec61860 Mon Sep 17 00:00:00 2001 From: Peng Hao Date: Fri, 22 May 2020 09:29:25 +0000 Subject: mmc: block: Fix use-after-free issue for rpmb MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The data structure member “rpmb->md” was passed to a call of the function “mmc_blk_put” after a call of the function “put_device”. Reorder these function calls to keep the data accesses consistent. Fixes: 1c87f7357849 ("mmc: block: Fix bug when removing RPMB chardev ") Signed-off-by: Peng Hao Cc: stable@vger.kernel.org [Uffe: Fixed up mangled patch and updated commit message] Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index c5367e2c8487..7896952de1ac 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -2484,8 +2484,8 @@ static int mmc_rpmb_chrdev_release(struct inode *inode, struct file *filp) struct mmc_rpmb_data *rpmb = container_of(inode->i_cdev, struct mmc_rpmb_data, chrdev); - put_device(&rpmb->dev); mmc_blk_put(rpmb->md); + put_device(&rpmb->dev); return 0; } -- cgit v1.2.3-58-ga151 From e6862430fa5ef557d40c221c7f9bb3beb5feaca4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 21 May 2020 09:57:13 +0800 Subject: gpio: mlxbf2: Fix sleeping while holding spinlock mutex_lock() can sleep, don't call mutex_lock() while holding spin_lock. Fixes: bc0ae0e737f5 ("gpio: add driver for Mellanox BlueField 2 GPIO controller") Signed-off-by: Axel Lin Acked-by: asmaa@mellanox.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mlxbf2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c index 7b7085050219..da570e63589d 100644 --- a/drivers/gpio/gpio-mlxbf2.c +++ b/drivers/gpio/gpio-mlxbf2.c @@ -127,8 +127,8 @@ static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs) { u32 arm_gpio_lock_val; - spin_lock(&gs->gc.bgpio_lock); mutex_lock(yu_arm_gpio_lock_param.lock); + spin_lock(&gs->gc.bgpio_lock); arm_gpio_lock_val = readl(yu_arm_gpio_lock_param.io); @@ -136,8 +136,8 @@ static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs) * When lock active bit[31] is set, ModeX is write enabled */ if (YU_LOCK_ACTIVE_BIT(arm_gpio_lock_val)) { - mutex_unlock(yu_arm_gpio_lock_param.lock); spin_unlock(&gs->gc.bgpio_lock); + mutex_unlock(yu_arm_gpio_lock_param.lock); return -EINVAL; } @@ -152,8 +152,8 @@ static int mlxbf2_gpio_lock_acquire(struct mlxbf2_gpio_context *gs) static void mlxbf2_gpio_lock_release(struct mlxbf2_gpio_context *gs) { writel(YU_ARM_GPIO_LOCK_RELEASE, yu_arm_gpio_lock_param.io); - mutex_unlock(yu_arm_gpio_lock_param.lock); spin_unlock(&gs->gc.bgpio_lock); + mutex_unlock(yu_arm_gpio_lock_param.lock); } /* -- cgit v1.2.3-58-ga151 From 558ab2e8155e5f42ca0a6407957cd4173dc166cc Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Fri, 22 May 2020 12:12:19 +0800 Subject: gpio: pxa: Fix return value of pxa_gpio_probe() When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 542c25b7a209 ("drivers: gpio: pxa: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pxa.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 1361270ecf8c..0cb6600b8eee 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -660,8 +660,8 @@ static int pxa_gpio_probe(struct platform_device *pdev) pchip->irq1 = irq1; gpio_reg_base = devm_platform_ioremap_resource(pdev, 0); - if (!gpio_reg_base) - return -EINVAL; + if (IS_ERR(gpio_reg_base)) + return PTR_ERR(gpio_reg_base); clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { -- cgit v1.2.3-58-ga151 From 98f7d1b15e87c84488b30ecc4ec753b0690b9dbf Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Fri, 22 May 2020 12:12:18 +0800 Subject: gpio: bcm-kona: Fix return value of bcm_kona_gpio_probe() Propagate the error code returned by devm_platform_ioremap_resource() out of probe() instead of overwriting it. Fixes: 72d8cb715477 ("drivers: gpio: bcm-kona: use devm_platform_ioremap_resource()") Signed-off-by: Tiezhu Yang [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c index baee8c3f06ad..cf3687a7925f 100644 --- a/drivers/gpio/gpio-bcm-kona.c +++ b/drivers/gpio/gpio-bcm-kona.c @@ -625,7 +625,7 @@ static int bcm_kona_gpio_probe(struct platform_device *pdev) kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(kona_gpio->reg_base)) { - ret = -ENXIO; + ret = PTR_ERR(kona_gpio->reg_base); goto err_irq_domain; } -- cgit v1.2.3-58-ga151 From 0bbab5f0301587cad4e923ccc49bb910db86162c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 25 May 2020 11:38:17 +0200 Subject: cfg80211: fix debugfs rename crash Removing the "if (IS_ERR(dir)) dir = NULL;" check only works if we adjust the remaining code to not rely on it being NULL. Check IS_ERR_OR_NULL() before attempting to dereference it. I'm not actually entirely sure this fixes the syzbot crash as the kernel config indicates that they do have DEBUG_FS in the kernel, but this is what I found when looking there. Cc: stable@vger.kernel.org Fixes: d82574a8e5a4 ("cfg80211: no need to check return value of debugfs_create functions") Reported-by: syzbot+fd5332e429401bf42d18@syzkaller.appspotmail.com Reviewed-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20200525113816.fc4da3ec3d4b.Ica63a110679819eaa9fb3bc1b7437d96b1fd187d@changeid Signed-off-by: Johannes Berg --- net/wireless/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 341402b4f178..ce024440fa51 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -142,7 +142,7 @@ int cfg80211_dev_rename(struct cfg80211_registered_device *rdev, if (result) return result; - if (rdev->wiphy.debugfsdir) + if (!IS_ERR_OR_NULL(rdev->wiphy.debugfsdir)) debugfs_rename(rdev->wiphy.debugfsdir->d_parent, rdev->wiphy.debugfsdir, rdev->wiphy.debugfsdir->d_parent, newname); -- cgit v1.2.3-58-ga151 From ed17b8d377eaf6b4a01d46942b4c647378a79bdd Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 25 May 2020 13:53:37 +0800 Subject: xfrm: fix a warning in xfrm_policy_insert_list This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by: Xiumei Mu Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 297b2fdb3c29..564aa6492e7c 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1436,12 +1436,7 @@ static void xfrm_policy_requeue(struct xfrm_policy *old, static bool xfrm_policy_mark_match(struct xfrm_policy *policy, struct xfrm_policy *pol) { - u32 mark = policy->mark.v & policy->mark.m; - - if (policy->mark.v == pol->mark.v && policy->mark.m == pol->mark.m) - return true; - - if ((mark & pol->mark.m) == pol->mark.v && + if (policy->mark.v == pol->mark.v && policy->priority == pol->priority) return true; -- cgit v1.2.3-58-ga151 From db857e6ae548f0f4f4a0f63fffeeedf3cca21f9d Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Fri, 22 May 2020 22:04:57 -0500 Subject: RDMA/pvrdma: Fix missing pci disable in pvrdma_pci_probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In function pvrdma_pci_probe(), pdev was not disabled in one error path. Thus replace the jump target “err_free_device” by "err_disable_pdev". Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Link: https://lore.kernel.org/r/20200523030457.16160-1-wu000273@umn.edu Signed-off-by: Qiushi Wu Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c index e580ae9cc55a..780fd2dfc07e 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c +++ b/drivers/infiniband/hw/vmw_pvrdma/pvrdma_main.c @@ -829,7 +829,7 @@ static int pvrdma_pci_probe(struct pci_dev *pdev, !(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { dev_err(&pdev->dev, "PCI BAR region not MMIO\n"); ret = -ENOMEM; - goto err_free_device; + goto err_disable_pdev; } ret = pci_request_regions(pdev, DRV_NAME); -- cgit v1.2.3-58-ga151 From e9c284ec4b41c827f4369973d2792992849e4fa5 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 6 May 2020 11:46:25 +0200 Subject: netfilter: nft_reject_bridge: enable reject with bridge vlan Currently, using the bridge reject target with tagged packets results in untagged packets being sent back. Fix this by mirroring the vlan id as well. Fixes: 85f5b3086a04 ("netfilter: bridge: add reject support") Signed-off-by: Michael Braun Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nft_reject_bridge.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bridge/netfilter/nft_reject_bridge.c b/net/bridge/netfilter/nft_reject_bridge.c index b325b569e761..f48cf4cfb80f 100644 --- a/net/bridge/netfilter/nft_reject_bridge.c +++ b/net/bridge/netfilter/nft_reject_bridge.c @@ -31,6 +31,12 @@ static void nft_reject_br_push_etherhdr(struct sk_buff *oldskb, ether_addr_copy(eth->h_dest, eth_hdr(oldskb)->h_source); eth->h_proto = eth_hdr(oldskb)->h_proto; skb_pull(nskb, ETH_HLEN); + + if (skb_vlan_tag_present(oldskb)) { + u16 vid = skb_vlan_tag_get(oldskb); + + __vlan_hwaccel_put_tag(nskb, oldskb->vlan_proto, vid); + } } static int nft_bridge_iphdr_validate(struct sk_buff *skb) -- cgit v1.2.3-58-ga151 From a164b95ad6055c50612795882f35e0efda1f1390 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 14 May 2020 13:31:21 +0200 Subject: netfilter: ipset: Fix subcounter update skip If IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE is set, user requested to not update counters in sub sets. Therefore IPSET_FLAG_SKIP_COUNTER_UPDATE must be set, not unset. Fixes: 6e01781d1c80e ("netfilter: ipset: set match: add support to match the counters") Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_list_set.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipset/ip_set_list_set.c b/net/netfilter/ipset/ip_set_list_set.c index cd747c0962fd..5a67f7966574 100644 --- a/net/netfilter/ipset/ip_set_list_set.c +++ b/net/netfilter/ipset/ip_set_list_set.c @@ -59,7 +59,7 @@ list_set_ktest(struct ip_set *set, const struct sk_buff *skb, /* Don't lookup sub-counters at all */ opt->cmdflags &= ~IPSET_FLAG_MATCH_COUNTERS; if (opt->cmdflags & IPSET_FLAG_SKIP_SUBCOUNTER_UPDATE) - opt->cmdflags &= ~IPSET_FLAG_SKIP_COUNTER_UPDATE; + opt->cmdflags |= IPSET_FLAG_SKIP_COUNTER_UPDATE; list_for_each_entry_rcu(e, &map->members, list) { ret = ip_set_test(e->id, skb, par, opt); if (ret <= 0) -- cgit v1.2.3-58-ga151 From 4c559f15efcc43b996f4da528cd7f9483aaca36d Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Thu, 14 May 2020 14:14:23 +0200 Subject: netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code Dan Carpenter says: "Smatch complains that the value for "cmd" comes from the network and can't be trusted." Add pptp_msg_name() helper function that checks for the array boundary. Fixes: f09943fefe6b ("[NETFILTER]: nf_conntrack/nf_nat: add PPTP helper port") Reported-by: Dan Carpenter Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_pptp.h | 2 +- net/ipv4/netfilter/nf_nat_pptp.c | 7 +--- net/netfilter/nf_conntrack_pptp.c | 62 ++++++++++++++++------------- 3 files changed, 38 insertions(+), 33 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_pptp.h b/include/linux/netfilter/nf_conntrack_pptp.h index fcc409de31a4..6a4ff6d5ebc2 100644 --- a/include/linux/netfilter/nf_conntrack_pptp.h +++ b/include/linux/netfilter/nf_conntrack_pptp.h @@ -10,7 +10,7 @@ #include #include -extern const char *const pptp_msg_name[]; +extern const char *const pptp_msg_name(u_int16_t msg); /* state of the control session */ enum pptp_ctrlsess_state { diff --git a/net/ipv4/netfilter/nf_nat_pptp.c b/net/ipv4/netfilter/nf_nat_pptp.c index 3c25a467b3ef..7afde8828b4c 100644 --- a/net/ipv4/netfilter/nf_nat_pptp.c +++ b/net/ipv4/netfilter/nf_nat_pptp.c @@ -166,8 +166,7 @@ pptp_outbound_pkt(struct sk_buff *skb, break; default: pr_debug("unknown outbound packet 0x%04x:%s\n", msg, - msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : - pptp_msg_name[0]); + pptp_msg_name(msg)); fallthrough; case PPTP_SET_LINK_INFO: /* only need to NAT in case PAC is behind NAT box */ @@ -268,9 +267,7 @@ pptp_inbound_pkt(struct sk_buff *skb, pcid_off = offsetof(union pptp_ctrl_union, setlink.peersCallID); break; default: - pr_debug("unknown inbound packet %s\n", - msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : - pptp_msg_name[0]); + pr_debug("unknown inbound packet %s\n", pptp_msg_name(msg)); fallthrough; case PPTP_START_SESSION_REQUEST: case PPTP_START_SESSION_REPLY: diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index a971183f11af..7ad247784cfa 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -72,24 +72,32 @@ EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expectfn); #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) /* PptpControlMessageType names */ -const char *const pptp_msg_name[] = { - "UNKNOWN_MESSAGE", - "START_SESSION_REQUEST", - "START_SESSION_REPLY", - "STOP_SESSION_REQUEST", - "STOP_SESSION_REPLY", - "ECHO_REQUEST", - "ECHO_REPLY", - "OUT_CALL_REQUEST", - "OUT_CALL_REPLY", - "IN_CALL_REQUEST", - "IN_CALL_REPLY", - "IN_CALL_CONNECT", - "CALL_CLEAR_REQUEST", - "CALL_DISCONNECT_NOTIFY", - "WAN_ERROR_NOTIFY", - "SET_LINK_INFO" +static const char *const pptp_msg_name_array[PPTP_MSG_MAX + 1] = { + [0] = "UNKNOWN_MESSAGE", + [PPTP_START_SESSION_REQUEST] = "START_SESSION_REQUEST", + [PPTP_START_SESSION_REPLY] = "START_SESSION_REPLY", + [PPTP_STOP_SESSION_REQUEST] = "STOP_SESSION_REQUEST", + [PPTP_STOP_SESSION_REPLY] = "STOP_SESSION_REPLY", + [PPTP_ECHO_REQUEST] = "ECHO_REQUEST", + [PPTP_ECHO_REPLY] = "ECHO_REPLY", + [PPTP_OUT_CALL_REQUEST] = "OUT_CALL_REQUEST", + [PPTP_OUT_CALL_REPLY] = "OUT_CALL_REPLY", + [PPTP_IN_CALL_REQUEST] = "IN_CALL_REQUEST", + [PPTP_IN_CALL_REPLY] = "IN_CALL_REPLY", + [PPTP_IN_CALL_CONNECT] = "IN_CALL_CONNECT", + [PPTP_CALL_CLEAR_REQUEST] = "CALL_CLEAR_REQUEST", + [PPTP_CALL_DISCONNECT_NOTIFY] = "CALL_DISCONNECT_NOTIFY", + [PPTP_WAN_ERROR_NOTIFY] = "WAN_ERROR_NOTIFY", + [PPTP_SET_LINK_INFO] = "SET_LINK_INFO" }; + +const char *const pptp_msg_name(u_int16_t msg) +{ + if (msg > PPTP_MSG_MAX) + return pptp_msg_name_array[0]; + + return pptp_msg_name_array[msg]; +} EXPORT_SYMBOL(pptp_msg_name); #endif @@ -276,7 +284,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, typeof(nf_nat_pptp_hook_inbound) nf_nat_pptp_inbound; msg = ntohs(ctlh->messageType); - pr_debug("inbound control message %s\n", pptp_msg_name[msg]); + pr_debug("inbound control message %s\n", pptp_msg_name(msg)); switch (msg) { case PPTP_START_SESSION_REPLY: @@ -311,7 +319,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, pcid = pptpReq->ocack.peersCallID; if (info->pns_call_id != pcid) goto invalid; - pr_debug("%s, CID=%X, PCID=%X\n", pptp_msg_name[msg], + pr_debug("%s, CID=%X, PCID=%X\n", pptp_msg_name(msg), ntohs(cid), ntohs(pcid)); if (pptpReq->ocack.resultCode == PPTP_OUTCALL_CONNECT) { @@ -328,7 +336,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, goto invalid; cid = pptpReq->icreq.callID; - pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid)); + pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid)); info->cstate = PPTP_CALL_IN_REQ; info->pac_call_id = cid; break; @@ -347,7 +355,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, if (info->pns_call_id != pcid) goto invalid; - pr_debug("%s, PCID=%X\n", pptp_msg_name[msg], ntohs(pcid)); + pr_debug("%s, PCID=%X\n", pptp_msg_name(msg), ntohs(pcid)); info->cstate = PPTP_CALL_IN_CONF; /* we expect a GRE connection from PAC to PNS */ @@ -357,7 +365,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, case PPTP_CALL_DISCONNECT_NOTIFY: /* server confirms disconnect */ cid = pptpReq->disc.callID; - pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid)); + pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid)); info->cstate = PPTP_CALL_NONE; /* untrack this call id, unexpect GRE packets */ @@ -384,7 +392,7 @@ pptp_inbound_pkt(struct sk_buff *skb, unsigned int protoff, invalid: pr_debug("invalid %s: type=%d cid=%u pcid=%u " "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n", - msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0], + pptp_msg_name(msg), msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate, ntohs(info->pns_call_id), ntohs(info->pac_call_id)); return NF_ACCEPT; @@ -404,7 +412,7 @@ pptp_outbound_pkt(struct sk_buff *skb, unsigned int protoff, typeof(nf_nat_pptp_hook_outbound) nf_nat_pptp_outbound; msg = ntohs(ctlh->messageType); - pr_debug("outbound control message %s\n", pptp_msg_name[msg]); + pr_debug("outbound control message %s\n", pptp_msg_name(msg)); switch (msg) { case PPTP_START_SESSION_REQUEST: @@ -426,7 +434,7 @@ pptp_outbound_pkt(struct sk_buff *skb, unsigned int protoff, info->cstate = PPTP_CALL_OUT_REQ; /* track PNS call id */ cid = pptpReq->ocreq.callID; - pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid)); + pr_debug("%s, CID=%X\n", pptp_msg_name(msg), ntohs(cid)); info->pns_call_id = cid; break; @@ -440,7 +448,7 @@ pptp_outbound_pkt(struct sk_buff *skb, unsigned int protoff, pcid = pptpReq->icack.peersCallID; if (info->pac_call_id != pcid) goto invalid; - pr_debug("%s, CID=%X PCID=%X\n", pptp_msg_name[msg], + pr_debug("%s, CID=%X PCID=%X\n", pptp_msg_name(msg), ntohs(cid), ntohs(pcid)); if (pptpReq->icack.resultCode == PPTP_INCALL_ACCEPT) { @@ -480,7 +488,7 @@ pptp_outbound_pkt(struct sk_buff *skb, unsigned int protoff, invalid: pr_debug("invalid %s: type=%d cid=%u pcid=%u " "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n", - msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0], + pptp_msg_name(msg), msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate, ntohs(info->pns_call_id), ntohs(info->pac_call_id)); return NF_ACCEPT; -- cgit v1.2.3-58-ga151 From ee04805ff54a63ffd90bc6749ebfe73473734ddb Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 24 May 2020 19:52:10 +0200 Subject: netfilter: conntrack: make conntrack userspace helpers work again Florian Westphal says: "Problem is that after the helper hook was merged back into the confirm one, the queueing itself occurs from the confirm hook, i.e. we queue from the last netfilter callback in the hook-list. Therefore, on return, the packet bypasses the confirm action and the connection is never committed to the main conntrack table. To fix this there are several ways: 1. revert the 'Fixes' commit and have a extra helper hook again. Works, but has the drawback of adding another indirect call for everyone. 2. Special case this: split the hooks only when userspace helper gets added, so queueing occurs at a lower priority again, and normal enqueue reinject would eventually call the last hook. 3. Extend the existing nf_queue ct update hook to allow a forced confirmation (plus run the seqadj code). This goes for 3)." Fixes: 827318feb69cb ("netfilter: conntrack: remove helper hook again") Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 78 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 72 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 1d57b95d3481..08e0c19f6b39 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2016,22 +2016,18 @@ static void nf_conntrack_attach(struct sk_buff *nskb, const struct sk_buff *skb) nf_conntrack_get(skb_nfct(nskb)); } -static int nf_conntrack_update(struct net *net, struct sk_buff *skb) +static int __nf_conntrack_update(struct net *net, struct sk_buff *skb, + struct nf_conn *ct) { struct nf_conntrack_tuple_hash *h; struct nf_conntrack_tuple tuple; enum ip_conntrack_info ctinfo; struct nf_nat_hook *nat_hook; unsigned int status; - struct nf_conn *ct; int dataoff; u16 l3num; u8 l4num; - ct = nf_ct_get(skb, &ctinfo); - if (!ct || nf_ct_is_confirmed(ct)) - return 0; - l3num = nf_ct_l3num(ct); dataoff = get_l4proto(skb, skb_network_offset(skb), l3num, &l4num); @@ -2088,6 +2084,76 @@ static int nf_conntrack_update(struct net *net, struct sk_buff *skb) return 0; } +/* This packet is coming from userspace via nf_queue, complete the packet + * processing after the helper invocation in nf_confirm(). + */ +static int nf_confirm_cthelper(struct sk_buff *skb, struct nf_conn *ct, + enum ip_conntrack_info ctinfo) +{ + const struct nf_conntrack_helper *helper; + const struct nf_conn_help *help; + unsigned int protoff; + + help = nfct_help(ct); + if (!help) + return 0; + + helper = rcu_dereference(help->helper); + if (!(helper->flags & NF_CT_HELPER_F_USERSPACE)) + return 0; + + switch (nf_ct_l3num(ct)) { + case NFPROTO_IPV4: + protoff = skb_network_offset(skb) + ip_hdrlen(skb); + break; +#if IS_ENABLED(CONFIG_IPV6) + case NFPROTO_IPV6: { + __be16 frag_off; + u8 pnum; + + pnum = ipv6_hdr(skb)->nexthdr; + protoff = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &pnum, + &frag_off); + if (protoff < 0 || (frag_off & htons(~0x7)) != 0) + return 0; + break; + } +#endif + default: + return 0; + } + + if (test_bit(IPS_SEQ_ADJUST_BIT, &ct->status) && + !nf_is_loopback_packet(skb)) { + if (!nf_ct_seq_adjust(skb, ct, ctinfo, protoff)) { + NF_CT_STAT_INC_ATOMIC(nf_ct_net(ct), drop); + return -1; + } + } + + /* We've seen it coming out the other side: confirm it */ + return nf_conntrack_confirm(skb) == NF_DROP ? - 1 : 0; +} + +static int nf_conntrack_update(struct net *net, struct sk_buff *skb) +{ + enum ip_conntrack_info ctinfo; + struct nf_conn *ct; + int err; + + ct = nf_ct_get(skb, &ctinfo); + if (!ct) + return 0; + + if (!nf_ct_is_confirmed(ct)) { + err = __nf_conntrack_update(net, skb, ct); + if (err < 0) + return err; + } + + return nf_confirm_cthelper(skb, ct, ctinfo); +} + static bool nf_conntrack_get_tuple_skb(struct nf_conntrack_tuple *dst_tuple, const struct sk_buff *skb) { -- cgit v1.2.3-58-ga151 From 703acd70f2496537457186211c2f03e792409e68 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 24 May 2020 21:04:42 +0200 Subject: netfilter: nfnetlink_cthelper: unbreak userspace helper support Restore helper data size initialization and fix memcopy of the helper data size. Fixes: 157ffffeb5dc ("netfilter: nfnetlink_cthelper: reject too large userspace allocation requests") Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nfnetlink_cthelper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink_cthelper.c b/net/netfilter/nfnetlink_cthelper.c index a5f294aa8e4c..5b0d0a77379c 100644 --- a/net/netfilter/nfnetlink_cthelper.c +++ b/net/netfilter/nfnetlink_cthelper.c @@ -103,7 +103,7 @@ nfnl_cthelper_from_nlattr(struct nlattr *attr, struct nf_conn *ct) if (help->helper->data_len == 0) return -EINVAL; - nla_memcpy(help->data, nla_data(attr), sizeof(help->data)); + nla_memcpy(help->data, attr, sizeof(help->data)); return 0; } @@ -240,6 +240,7 @@ nfnl_cthelper_create(const struct nlattr * const tb[], ret = -ENOMEM; goto err2; } + helper->data_len = size; helper->flags |= NF_CT_HELPER_F_USERSPACE; memcpy(&helper->tuple, tuple, sizeof(struct nf_conntrack_tuple)); -- cgit v1.2.3-58-ga151 From b16a87d0aef7a6be766f6618976dc5ff2c689291 Mon Sep 17 00:00:00 2001 From: Björn Töpel Date: Mon, 25 May 2020 10:03:59 +0200 Subject: xsk: Add overflow check for u64 division, stored into u32 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The npgs member of struct xdp_umem is an u32 entity, and stores the number of pages the UMEM consumes. The calculation of npgs npgs = size / PAGE_SIZE can overflow. To avoid overflow scenarios, the division is now first stored in a u64, and the result is verified to fit into 32b. An alternative would be storing the npgs as a u64, however, this wastes memory and is an unrealisticly large packet area. Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt") Reported-by: "Minh Bùi Quang" Signed-off-by: Björn Töpel Signed-off-by: Daniel Borkmann Acked-by: Jonathan Lemon Link: https://lore.kernel.org/bpf/CACtPs=GGvV-_Yj6rbpzTVnopgi5nhMoCcTkSkYrJHGQHJWFZMQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20200525080400.13195-1-bjorn.topel@gmail.com --- net/xdp/xdp_umem.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c index ed7a6060f73c..3889bd9aec46 100644 --- a/net/xdp/xdp_umem.c +++ b/net/xdp/xdp_umem.c @@ -341,8 +341,8 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr) { bool unaligned_chunks = mr->flags & XDP_UMEM_UNALIGNED_CHUNK_FLAG; u32 chunk_size = mr->chunk_size, headroom = mr->headroom; + u64 npgs, addr = mr->addr, size = mr->len; unsigned int chunks, chunks_per_page; - u64 addr = mr->addr, size = mr->len; int err; if (chunk_size < XDP_UMEM_MIN_CHUNK_SIZE || chunk_size > PAGE_SIZE) { @@ -372,6 +372,10 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr) if ((addr + size) < addr) return -EINVAL; + npgs = div_u64(size, PAGE_SIZE); + if (npgs > U32_MAX) + return -EINVAL; + chunks = (unsigned int)div_u64(size, chunk_size); if (chunks == 0) return -EINVAL; @@ -391,7 +395,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr) umem->size = size; umem->headroom = headroom; umem->chunk_size_nohr = chunk_size - headroom; - umem->npgs = size / PAGE_SIZE; + umem->npgs = (u32)npgs; umem->pgs = NULL; umem->user = NULL; umem->flags = mr->flags; -- cgit v1.2.3-58-ga151 From 0cada33241d9de205522e3858b18e506ca5cce2c Mon Sep 17 00:00:00 2001 From: Vinay Kumar Yadav Date: Sat, 23 May 2020 01:40:31 +0530 Subject: net/tls: fix race condition causing kernel panic tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently. // tls_sw_recvmsg() if (atomic_read(&ctx->decrypt_pending)) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); else reinit_completion(&ctx->async_wait.completion); //tls_decrypt_done() pending = atomic_dec_return(&ctx->decrypt_pending); if (!pending && READ_ONCE(ctx->async_notify)) complete(&ctx->async_wait.completion); Consider the scenario tls_decrypt_done() is about to run complete() if (!pending && READ_ONCE(ctx->async_notify)) and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(), then tls_decrypt_done() runs complete(). This sequence of execution results in wrong completion. Consequently, for next decrypt request, it will not wait for completion, eventually on connection close, crypto resources freed, there is no way to handle pending decrypt response. This race condition can be avoided by having atomic_read() mutually exclusive with atomic_dec_return(),complete().Intoduced spin lock to ensure the mutual exclution. Addressed similar problem in tx direction. v1->v2: - More readable commit message. - Corrected the lock to fix new race scenario. - Removed barrier which is not needed now. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Vinay Kumar Yadav Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- include/net/tls.h | 4 ++++ net/tls/tls_sw.c | 33 +++++++++++++++++++++++++++------ 2 files changed, 31 insertions(+), 6 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index bf9eb4823933..18cd4f418464 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -135,6 +135,8 @@ struct tls_sw_context_tx { struct tls_rec *open_rec; struct list_head tx_list; atomic_t encrypt_pending; + /* protect crypto_wait with encrypt_pending */ + spinlock_t encrypt_compl_lock; int async_notify; u8 async_capable:1; @@ -155,6 +157,8 @@ struct tls_sw_context_rx { u8 async_capable:1; u8 decrypted:1; atomic_t decrypt_pending; + /* protect crypto_wait with decrypt_pending*/ + spinlock_t decrypt_compl_lock; bool async_notify; }; diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 2d399b6c4075..8c2763eb6aae 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -206,10 +206,12 @@ static void tls_decrypt_done(struct crypto_async_request *req, int err) kfree(aead_req); + spin_lock_bh(&ctx->decrypt_compl_lock); pending = atomic_dec_return(&ctx->decrypt_pending); - if (!pending && READ_ONCE(ctx->async_notify)) + if (!pending && ctx->async_notify) complete(&ctx->async_wait.completion); + spin_unlock_bh(&ctx->decrypt_compl_lock); } static int tls_do_decryption(struct sock *sk, @@ -467,10 +469,12 @@ static void tls_encrypt_done(struct crypto_async_request *req, int err) ready = true; } + spin_lock_bh(&ctx->encrypt_compl_lock); pending = atomic_dec_return(&ctx->encrypt_pending); - if (!pending && READ_ONCE(ctx->async_notify)) + if (!pending && ctx->async_notify) complete(&ctx->async_wait.completion); + spin_unlock_bh(&ctx->encrypt_compl_lock); if (!ready) return; @@ -929,6 +933,7 @@ int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size) int num_zc = 0; int orig_size; int ret = 0; + int pending; if (msg->msg_flags & ~(MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL)) return -EOPNOTSUPP; @@ -1095,13 +1100,19 @@ trim_sgl: goto send_end; } else if (num_zc) { /* Wait for pending encryptions to get completed */ - smp_store_mb(ctx->async_notify, true); + spin_lock_bh(&ctx->encrypt_compl_lock); + ctx->async_notify = true; - if (atomic_read(&ctx->encrypt_pending)) + pending = atomic_read(&ctx->encrypt_pending); + spin_unlock_bh(&ctx->encrypt_compl_lock); + if (pending) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); else reinit_completion(&ctx->async_wait.completion); + /* There can be no concurrent accesses, since we have no + * pending encrypt operations + */ WRITE_ONCE(ctx->async_notify, false); if (ctx->async_wait.err) { @@ -1732,6 +1743,7 @@ int tls_sw_recvmsg(struct sock *sk, bool is_kvec = iov_iter_is_kvec(&msg->msg_iter); bool is_peek = flags & MSG_PEEK; int num_async = 0; + int pending; flags |= nonblock; @@ -1894,8 +1906,11 @@ pick_next_record: recv_end: if (num_async) { /* Wait for all previously submitted records to be decrypted */ - smp_store_mb(ctx->async_notify, true); - if (atomic_read(&ctx->decrypt_pending)) { + spin_lock_bh(&ctx->decrypt_compl_lock); + ctx->async_notify = true; + pending = atomic_read(&ctx->decrypt_pending); + spin_unlock_bh(&ctx->decrypt_compl_lock); + if (pending) { err = crypto_wait_req(-EINPROGRESS, &ctx->async_wait); if (err) { /* one of async decrypt failed */ @@ -1907,6 +1922,10 @@ recv_end: } else { reinit_completion(&ctx->async_wait.completion); } + + /* There can be no concurrent accesses, since we have no + * pending decrypt operations + */ WRITE_ONCE(ctx->async_notify, false); /* Drain records from the rx_list & copy if required */ @@ -2293,6 +2312,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) if (tx) { crypto_init_wait(&sw_ctx_tx->async_wait); + spin_lock_init(&sw_ctx_tx->encrypt_compl_lock); crypto_info = &ctx->crypto_send.info; cctx = &ctx->tx; aead = &sw_ctx_tx->aead_send; @@ -2301,6 +2321,7 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) sw_ctx_tx->tx_work.sk = sk; } else { crypto_init_wait(&sw_ctx_rx->async_wait); + spin_lock_init(&sw_ctx_rx->decrypt_compl_lock); crypto_info = &ctx->crypto_recv.info; cctx = &ctx->rx; skb_queue_head_init(&sw_ctx_rx->rx_list); -- cgit v1.2.3-58-ga151 From 5d14c304bfc14b4fd052dc83d5224376b48f52f0 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 25 May 2020 00:22:51 +0300 Subject: dpaa_eth: fix usage as DSA master, try 3 The dpaa-eth driver probes on compatible string for the MAC node, and the fman/mac.c driver allocates a dpaa-ethernet platform device that triggers the probing of the dpaa-eth net device driver. All of this is fine, but the problem is that the struct device of the dpaa_eth net_device is 2 parents away from the MAC which can be referenced via of_node. So of_find_net_device_by_node can't find it, and DSA switches won't be able to probe on top of FMan ports. It would be a bit silly to modify a core function (of_find_net_device_by_node) to look for dev->parent->parent->of_node just for one driver. We're just 1 step away from implementing full recursion. Actually there have already been at least 2 previous attempts to make this work: - Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") - One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA": https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/ (I couldn't really figure out which one was supposed to solve the problem and how). Point being, it looks like this is still pretty much a problem today. On T1040, the /sys/class/net/eth0 symlink currently points to ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/dpaa-ethernet.0/net/eth0 which pretty much illustrates the problem. The closest of_node we've got is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000, which is what we'd like to be able to reference from DSA as host port. For of_find_net_device_by_node to find the eth0 port, we would need the parent of the eth0 net_device to not be the "dpaa-ethernet" platform device, but to point 1 level higher, aka the "fsl,fman-memac" node directly. The new sysfs path would look like this: ../../devices/platform/ffe000000.soc/ffe400000.fman/ffe4e6000.ethernet/net/eth0 And this is exactly what SET_NETDEV_DEV does. It sets the parent of the net_device. The new parent has an of_node associated with it, and of_dev_node_match already checks for the of_node of the device or of its parent. Fixes: a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") Fixes: c6e26ea8c893 ("dpaa_eth: change device used") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c index 2cd1f8efdfa3..6bfa7575af94 100644 --- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -2914,7 +2914,7 @@ static int dpaa_eth_probe(struct platform_device *pdev) } /* Do this here, so we can be verbose early */ - SET_NETDEV_DEV(net_dev, dev); + SET_NETDEV_DEV(net_dev, dev->parent); dev_set_drvdata(dev, net_dev); priv = netdev_priv(net_dev); -- cgit v1.2.3-58-ga151 From 15c973858903009e995b2037683de29dfe968621 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Mon, 25 May 2020 03:24:39 -0500 Subject: qlcnic: fix missing release in qlcnic_83xx_interrupt_test. In function qlcnic_83xx_interrupt_test(), function qlcnic_83xx_diag_alloc_res() is not handled by function qlcnic_83xx_diag_free_res() after a call of the function qlcnic_alloc_mbx_args() failed. Fix this issue by adding a jump target "fail_mbx_args", and jump to this new target when qlcnic_alloc_mbx_args() failed. Fixes: b6b4316c8b2f ("qlcnic: Handle qlcnic_alloc_mbx_args() failure") Signed-off-by: Qiushi Wu Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 2a533280b124..29b9c728a65e 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -3651,7 +3651,7 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev) ahw->diag_cnt = 0; ret = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_INTRPT_TEST); if (ret) - goto fail_diag_irq; + goto fail_mbx_args; if (adapter->flags & QLCNIC_MSIX_ENABLED) intrpt_id = ahw->intr_tbl[0].id; @@ -3681,6 +3681,8 @@ int qlcnic_83xx_interrupt_test(struct net_device *netdev) done: qlcnic_free_mbx_args(&cmd); + +fail_mbx_args: qlcnic_83xx_diag_free_res(netdev, drv_sds_rings); fail_diag_irq: -- cgit v1.2.3-58-ga151 From fb8cd6481ffd126f35e9e146a0dcf0c4e8899f2e Mon Sep 17 00:00:00 2001 From: Changming Liu Date: Tue, 26 May 2020 00:39:21 +0000 Subject: ALSA: hwdep: fix a left shifting 1 by 31 UB bug The "info.index" variable can be 31 in "1 << info.index". This might trigger an undefined behavior since 1 is signed. Fix this by casting 1 to 1u just to be sure "1u << 31" is defined. Signed-off-by: Changming Liu Cc: Link: https://lore.kernel.org/r/BL0PR06MB4548170B842CB055C9AF695DE5B00@BL0PR06MB4548.namprd06.prod.outlook.com Signed-off-by: Takashi Iwai --- sound/core/hwdep.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/core/hwdep.c b/sound/core/hwdep.c index b412d3b3d5ff..21edb8ac95eb 100644 --- a/sound/core/hwdep.c +++ b/sound/core/hwdep.c @@ -216,12 +216,12 @@ static int snd_hwdep_dsp_load(struct snd_hwdep *hw, if (info.index >= 32) return -EINVAL; /* check whether the dsp was already loaded */ - if (hw->dsp_loaded & (1 << info.index)) + if (hw->dsp_loaded & (1u << info.index)) return -EBUSY; err = hw->ops.dsp_load(hw, &info); if (err < 0) return err; - hw->dsp_loaded |= (1 << info.index); + hw->dsp_loaded |= (1u << info.index); return 0; } -- cgit v1.2.3-58-ga151 From 399c01aa49e548c82d40f8161915a5941dd3c60e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 May 2020 08:24:06 +0200 Subject: ALSA: hda/realtek - Add a model for Thinkpad T570 without DAC workaround We fixed the regression of the speaker volume for some Thinkpad models (e.g. T570) by the commit 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570"). Essentially it fixes the DAC / pin pairing by a static table. It was confirmed and merged to stable kernel later. Now, interestingly, we got another regression report for the very same model (T570) about the similar problem, and the commit above was the culprit. That is, by some reason, there are devices that prefer the DAC1, and another device DAC2! Unfortunately those have the same ID and we have no idea what can differentiate, in this patch, a new fixup model "tpt470-dock-fix" is provided, so that users with such a machine can apply it manually. When model=tpt470-dock-fix option is passed to snd-hda-intel module, it avoids the fixed DAC pairing and the DAC1 is assigned to the speaker like the earlier versions. Fixes: 54947cd64c1b ("ALSA: hda/realtek - Fix speaker output regression on Thinkpad T570") BugLink: https://apibugzilla.suse.com/show_bug.cgi?id=1172017 Cc: Link: https://lore.kernel.org/r/20200526062406.9799-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 041d2a32059b..92c6e58c3862 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5484,18 +5484,9 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec, { 0x19, 0x21a11010 }, /* dock mic */ { } }; - /* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise - * the speaker output becomes too low by some reason on Thinkpads with - * ALC298 codec - */ - static const hda_nid_t preferred_pairs[] = { - 0x14, 0x03, 0x17, 0x02, 0x21, 0x02, - 0 - }; struct alc_spec *spec = codec->spec; if (action == HDA_FIXUP_ACT_PRE_PROBE) { - spec->gen.preferred_dacs = preferred_pairs; spec->parse_flags = HDA_PINCFG_NO_HP_FIXUP; snd_hda_apply_pincfgs(codec, pincfgs); } else if (action == HDA_FIXUP_ACT_INIT) { @@ -5508,6 +5499,23 @@ static void alc_fixup_tpt470_dock(struct hda_codec *codec, } } +static void alc_fixup_tpt470_dacs(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + /* Assure the speaker pin to be coupled with DAC NID 0x03; otherwise + * the speaker output becomes too low by some reason on Thinkpads with + * ALC298 codec + */ + static const hda_nid_t preferred_pairs[] = { + 0x14, 0x03, 0x17, 0x02, 0x21, 0x02, + 0 + }; + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) + spec->gen.preferred_dacs = preferred_pairs; +} + static void alc_shutup_dell_xps13(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; @@ -6063,6 +6071,7 @@ enum { ALC700_FIXUP_INTEL_REFERENCE, ALC274_FIXUP_DELL_BIND_DACS, ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, + ALC298_FIXUP_TPT470_DOCK_FIX, ALC298_FIXUP_TPT470_DOCK, ALC255_FIXUP_DUMMY_LINEOUT_VERB, ALC255_FIXUP_DELL_HEADSET_MIC, @@ -6994,12 +7003,18 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC274_FIXUP_DELL_BIND_DACS }, - [ALC298_FIXUP_TPT470_DOCK] = { + [ALC298_FIXUP_TPT470_DOCK_FIX] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_tpt470_dock, .chained = true, .chain_id = ALC293_FIXUP_LENOVO_SPK_NOISE }, + [ALC298_FIXUP_TPT470_DOCK] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc_fixup_tpt470_dacs, + .chained = true, + .chain_id = ALC298_FIXUP_TPT470_DOCK_FIX + }, [ALC255_FIXUP_DUMMY_LINEOUT_VERB] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -7638,6 +7653,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC292_FIXUP_TPT440_DOCK, .name = "tpt440-dock"}, {.id = ALC292_FIXUP_TPT440, .name = "tpt440"}, {.id = ALC292_FIXUP_TPT460, .name = "tpt460"}, + {.id = ALC298_FIXUP_TPT470_DOCK_FIX, .name = "tpt470-dock-fix"}, {.id = ALC298_FIXUP_TPT470_DOCK, .name = "tpt470-dock"}, {.id = ALC233_FIXUP_LENOVO_MULTI_CODECS, .name = "dual-codecs"}, {.id = ALC700_FIXUP_INTEL_REFERENCE, .name = "alc700-ref"}, -- cgit v1.2.3-58-ga151 From 4020d1ccbe55bdf67b31d718d2400506eaf4b43f Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Tue, 26 May 2020 14:26:13 +0800 Subject: ALSA: usb-audio: mixer: volume quirk for ESS Technology Asus USB DAC The Asus USB DAC is a USB type-C audio dongle for connecting to the headset and headphone. The volume minimum value -23040 which is 0xa600 in hexadecimal with the resolution value 1 indicates this should be endianness issue caused by the firmware bug. Add a volume quirk to fix the volume control problem. Also fixes this warning: Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [5] FU [Headset Capture Volume] ch = 1, val = -23040/0/1 Warning! Unlikely big volume range (=23040), cval->res is probably wrong. [7] FU [Headset Playback Volume] ch = 1, val = -23040/0/1 Signed-off-by: Chris Chiu Cc: Link: https://lore.kernel.org/r/20200526062613.55401-1-chiu@endlessm.com Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index a88d7854513b..15769f266790 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -1182,6 +1182,14 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, cval->res = 384; } break; + case USB_ID(0x0495, 0x3042): /* ESS Technology Asus USB DAC */ + if ((strstr(kctl->id.name, "Playback Volume") != NULL) || + strstr(kctl->id.name, "Capture Volume") != NULL) { + cval->min >>= 8; + cval->max = 0; + cval->res = 1; + } + break; } } -- cgit v1.2.3-58-ga151 From 595d153dd1022392083ac93a1550382cbee127e0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 26 May 2020 16:18:08 +1000 Subject: powerpc/64s: Fix restore of NV GPRs after facility unavailable exception Commit 702f09805222 ("powerpc/64s/exception: Remove lite interrupt return") changed the interrupt return path to not restore non-volatile registers by default, and explicitly restore them in paths where it is required. But it missed that the facility unavailable exception can sometimes modify user registers, ie. when it does emulation of move from DSCR. This is seen as a failure of the dscr_sysfs_thread_test: test: dscr_sysfs_thread_test [cpu 0] User DSCR should be 1 but is 0 failure: dscr_sysfs_thread_test So restore non-volatile GPRs after facility unavailable exceptions. Currently the hypervisor facility unavailable exception is also wired up to call facility_unavailable_exception(). In practice we should never take a hypervisor facility unavailable exception for the DSCR. On older bare metal systems we set HFSCR_DSCR unconditionally in __init_HFSCR, or on newer systems it should be enabled via the "data-stream-control-register" device tree CPU feature. Even if it's not, since commit f3c99f97a3cd ("KVM: PPC: Book3S HV: Don't access HFSCR, LPIDR or LPCR when running nested"), the KVM code has unconditionally set HFSCR_DSCR when running guests. So we should only get a hypervisor facility unavailable for the DSCR if skiboot has disabled the "data-stream-control-register" feature, and we are somehow in guest context but not via KVM. Given all that, it should be unnecessary to add a restore of non-volatile GPRs after the hypervisor facility exception, because we never expect to hit that path. But equally we may as well add the restore, because we never expect to hit that path, and if we ever did, at least we would correctly restore the registers to their post emulation state. In future we can split the non-HV and HV facility unavailable handling so that there is no emulation in the HV handler, and then remove the restore for the HV case. Fixes: 702f09805222 ("powerpc/64s/exception: Remove lite interrupt return") Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200526061808.2472279-1-mpe@ellerman.id.au --- arch/powerpc/kernel/exceptions-64s.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index b0ad930cbae5..ebeebab74b56 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -2411,6 +2411,7 @@ EXC_COMMON_BEGIN(facility_unavailable_common) GEN_COMMON facility_unavailable addi r3,r1,STACK_FRAME_OVERHEAD bl facility_unavailable_exception + REST_NVGPRS(r1) /* instruction emulation may change GPRs */ b interrupt_return GEN_KVM facility_unavailable @@ -2440,6 +2441,7 @@ EXC_COMMON_BEGIN(h_facility_unavailable_common) GEN_COMMON h_facility_unavailable addi r3,r1,STACK_FRAME_OVERHEAD bl facility_unavailable_exception + REST_NVGPRS(r1) /* XXX Shouldn't be necessary in practice */ b interrupt_return GEN_KVM h_facility_unavailable -- cgit v1.2.3-58-ga151 From 700d3a5a664df267f01ec8887fd2d8ff98f67e7f Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Fri, 8 May 2020 17:25:32 -0700 Subject: x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long" Revert 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") and add a comment to discourage someone else from making the same mistake again. It turns out that some user code fails to compile if __X32_SYSCALL_BIT is unsigned long. See, for example [1] below. [ bp: Massage and do the same thing in the respective tools/ header. ] Fixes: 45e29d119e99 ("x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long") Reported-by: Thorsten Glaser Signed-off-by: Andy Lutomirski Signed-off-by: Borislav Petkov Cc: stable@kernel.org Link: [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=954294 Link: https://lkml.kernel.org/r/92e55442b744a5951fdc9cfee10badd0a5f7f828.1588983892.git.luto@kernel.org --- arch/x86/include/uapi/asm/unistd.h | 11 +++++++++-- tools/arch/x86/include/uapi/asm/unistd.h | 2 +- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/uapi/asm/unistd.h b/arch/x86/include/uapi/asm/unistd.h index 196fdd02b8b1..be5e2e747f50 100644 --- a/arch/x86/include/uapi/asm/unistd.h +++ b/arch/x86/include/uapi/asm/unistd.h @@ -2,8 +2,15 @@ #ifndef _UAPI_ASM_X86_UNISTD_H #define _UAPI_ASM_X86_UNISTD_H -/* x32 syscall flag bit */ -#define __X32_SYSCALL_BIT 0x40000000UL +/* + * x32 syscall flag bit. Some user programs expect syscall NR macros + * and __X32_SYSCALL_BIT to have type int, even though syscall numbers + * are, for practical purposes, unsigned long. + * + * Fortunately, expressions like (nr & ~__X32_SYSCALL_BIT) do the right + * thing regardless. + */ +#define __X32_SYSCALL_BIT 0x40000000 #ifndef __KERNEL__ # ifdef __i386__ diff --git a/tools/arch/x86/include/uapi/asm/unistd.h b/tools/arch/x86/include/uapi/asm/unistd.h index 196fdd02b8b1..30d7d04d72d6 100644 --- a/tools/arch/x86/include/uapi/asm/unistd.h +++ b/tools/arch/x86/include/uapi/asm/unistd.h @@ -3,7 +3,7 @@ #define _UAPI_ASM_X86_UNISTD_H /* x32 syscall flag bit */ -#define __X32_SYSCALL_BIT 0x40000000UL +#define __X32_SYSCALL_BIT 0x40000000 #ifndef __KERNEL__ # ifdef __i386__ -- cgit v1.2.3-58-ga151 From 18f855e574d9799a0e7489f8ae6fd8447d0dd74a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 26 May 2020 09:38:31 -0600 Subject: sched/fair: Don't NUMA balance for kthreads Stefano reported a crash with using SQPOLL with io_uring: BUG: kernel NULL pointer dereference, address: 00000000000003b0 CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11 RIP: 0010:task_numa_work+0x4f/0x2c0 Call Trace: task_work_run+0x68/0xa0 io_sq_thread+0x252/0x3d0 kthread+0xf9/0x130 ret_from_fork+0x35/0x40 which is task_numa_work() oopsing on current->mm being NULL. The task work is queued by task_tick_numa(), which checks if current->mm is NULL at the time of the call. But this state isn't necessarily persistent, if the kthread is using use_mm() to temporarily adopt the mm of a task. Change the task_tick_numa() check to exclude kernel threads in general, as it doesn't make sense to attempt ot balance for kthreads anyway. Reported-by: Stefano Garzarella Signed-off-by: Jens Axboe Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dk --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 538ba5d94e99..da3e5b54715b 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2908,7 +2908,7 @@ static void task_tick_numa(struct rq *rq, struct task_struct *curr) /* * We don't care about NUMA placement if we don't have memory. */ - if (!curr->mm || (curr->flags & PF_EXITING) || work->next != work) + if ((curr->flags & (PF_EXITING | PF_KTHREAD)) || work->next != work) return; /* -- cgit v1.2.3-58-ga151 From a4ae32c71fe90794127b32d26d7ad795813b502e Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Mon, 25 May 2020 12:56:15 -0500 Subject: exec: Always set cap_ambient in cap_bprm_set_creds An invariant of cap_bprm_set_creds is that every field in the new cred structure that cap_bprm_set_creds might set, needs to be set every time to ensure the fields does not get a stale value. The field cap_ambient is not set every time cap_bprm_set_creds is called, which means that if there is a suid or sgid script with an interpreter that has neither the suid nor the sgid bits set the interpreter should be able to accept ambient credentials. Unfortuantely because cap_ambient is not reset to it's original value the interpreter can not accept ambient credentials. Given that the ambient capability set is expected to be controlled by the caller, I don't think this is particularly serious. But it is definitely worth fixing so the code works correctly. I have tested to verify my reading of the code is correct and the interpreter of a sgid can receive ambient capabilities with this change and cannot receive ambient capabilities without this change. Cc: stable@vger.kernel.org Cc: Andy Lutomirski Fixes: 58319057b784 ("capabilities: ambient capabilities") Signed-off-by: "Eric W. Biederman" --- security/commoncap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/security/commoncap.c b/security/commoncap.c index f4ee0ae106b2..0ca31c8bc0b1 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -812,6 +812,7 @@ int cap_bprm_set_creds(struct linux_binprm *bprm) int ret; kuid_t root_uid; + new->cap_ambient = old->cap_ambient; if (WARN_ON(!cap_ambient_invariant_ok(old))) return -EPERM; -- cgit v1.2.3-58-ga151 From ac21753a5c2c9a6a2019997481a2ac12bbde48c8 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 May 2020 12:56:14 -0600 Subject: nexthops: Move code from remove_nexthop_from_groups to remove_nh_grp_entry Move nh_grp dereference and check for removing nexthop group due to all members gone into remove_nh_grp_entry. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/ipv4/nexthop.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index 715e14475220..b4b772f120a7 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -694,17 +694,21 @@ static void nh_group_rebalance(struct nh_group *nhg) } } -static void remove_nh_grp_entry(struct nh_grp_entry *nhge, - struct nh_group *nhg, +static void remove_nh_grp_entry(struct net *net, struct nh_grp_entry *nhge, struct nl_info *nlinfo) { + struct nexthop *nhp = nhge->nh_parent; struct nexthop *nh = nhge->nh; struct nh_grp_entry *nhges; + struct nh_group *nhg; bool found = false; int i; WARN_ON(!nh); + list_del(&nhge->nh_list); + + nhg = rtnl_dereference(nhp->nh_grp); nhges = nhg->nh_entries; for (i = 0; i < nhg->num_nh; ++i) { if (found) { @@ -728,7 +732,11 @@ static void remove_nh_grp_entry(struct nh_grp_entry *nhge, nexthop_put(nh); if (nlinfo) - nexthop_notify(RTM_NEWNEXTHOP, nhge->nh_parent, nlinfo); + nexthop_notify(RTM_NEWNEXTHOP, nhp, nlinfo); + + /* if this group has no more entries then remove it */ + if (!nhg->num_nh) + remove_nexthop(net, nhp, nlinfo); } static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh, @@ -736,17 +744,8 @@ static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh, { struct nh_grp_entry *nhge, *tmp; - list_for_each_entry_safe(nhge, tmp, &nh->grp_list, nh_list) { - struct nh_group *nhg; - - list_del(&nhge->nh_list); - nhg = rtnl_dereference(nhge->nh_parent->nh_grp); - remove_nh_grp_entry(nhge, nhg, nlinfo); - - /* if this group has no more entries then remove it */ - if (!nhg->num_nh) - remove_nexthop(net, nhge->nh_parent, nlinfo); - } + list_for_each_entry_safe(nhge, tmp, &nh->grp_list, nh_list) + remove_nh_grp_entry(net, nhge, nlinfo); } static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo) -- cgit v1.2.3-58-ga151 From 90f33bffa382598a32cc82abfeb20adc92d041b6 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Tue, 26 May 2020 12:56:15 -0600 Subject: nexthops: don't modify published nexthop groups We must avoid modifying published nexthop groups while they might be in use, otherwise we might see NULL ptr dereferences. In order to do that we allocate 2 nexthoup group structures upon nexthop creation and swap between them when we have to delete an entry. The reason is that we can't fail nexthop group removal, so we can't handle allocation failure thus we move the extra allocation on creation where we can safely fail and return ENOMEM. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David Ahern Signed-off-by: David S. Miller --- include/net/nexthop.h | 1 + net/ipv4/nexthop.c | 91 ++++++++++++++++++++++++++++++++------------------- 2 files changed, 59 insertions(+), 33 deletions(-) diff --git a/include/net/nexthop.h b/include/net/nexthop.h index c440ccc861fc..8a343519ed7a 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -70,6 +70,7 @@ struct nh_grp_entry { }; struct nh_group { + struct nh_group *spare; /* spare group for removals */ u16 num_nh; bool mpath; bool has_v4; diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c index b4b772f120a7..563f71bcb2d7 100644 --- a/net/ipv4/nexthop.c +++ b/net/ipv4/nexthop.c @@ -63,9 +63,16 @@ static void nexthop_free_mpath(struct nexthop *nh) int i; nhg = rcu_dereference_raw(nh->nh_grp); - for (i = 0; i < nhg->num_nh; ++i) - WARN_ON(nhg->nh_entries[i].nh); + for (i = 0; i < nhg->num_nh; ++i) { + struct nh_grp_entry *nhge = &nhg->nh_entries[i]; + WARN_ON(!list_empty(&nhge->nh_list)); + nexthop_put(nhge->nh); + } + + WARN_ON(nhg->spare == nhg); + + kfree(nhg->spare); kfree(nhg); } @@ -697,46 +704,53 @@ static void nh_group_rebalance(struct nh_group *nhg) static void remove_nh_grp_entry(struct net *net, struct nh_grp_entry *nhge, struct nl_info *nlinfo) { + struct nh_grp_entry *nhges, *new_nhges; struct nexthop *nhp = nhge->nh_parent; struct nexthop *nh = nhge->nh; - struct nh_grp_entry *nhges; - struct nh_group *nhg; - bool found = false; - int i; + struct nh_group *nhg, *newg; + int i, j; WARN_ON(!nh); - list_del(&nhge->nh_list); - nhg = rtnl_dereference(nhp->nh_grp); - nhges = nhg->nh_entries; - for (i = 0; i < nhg->num_nh; ++i) { - if (found) { - nhges[i-1].nh = nhges[i].nh; - nhges[i-1].weight = nhges[i].weight; - list_del(&nhges[i].nh_list); - list_add(&nhges[i-1].nh_list, &nhges[i-1].nh->grp_list); - } else if (nhg->nh_entries[i].nh == nh) { - found = true; - } - } + newg = nhg->spare; - if (WARN_ON(!found)) + /* last entry, keep it visible and remove the parent */ + if (nhg->num_nh == 1) { + remove_nexthop(net, nhp, nlinfo); return; + } - nhg->num_nh--; - nhg->nh_entries[nhg->num_nh].nh = NULL; + newg->has_v4 = nhg->has_v4; + newg->mpath = nhg->mpath; + newg->num_nh = nhg->num_nh; - nh_group_rebalance(nhg); + /* copy old entries to new except the one getting removed */ + nhges = nhg->nh_entries; + new_nhges = newg->nh_entries; + for (i = 0, j = 0; i < nhg->num_nh; ++i) { + /* current nexthop getting removed */ + if (nhg->nh_entries[i].nh == nh) { + newg->num_nh--; + continue; + } - nexthop_put(nh); + list_del(&nhges[i].nh_list); + new_nhges[j].nh_parent = nhges[i].nh_parent; + new_nhges[j].nh = nhges[i].nh; + new_nhges[j].weight = nhges[i].weight; + list_add(&new_nhges[j].nh_list, &new_nhges[j].nh->grp_list); + j++; + } + + nh_group_rebalance(newg); + rcu_assign_pointer(nhp->nh_grp, newg); + + list_del(&nhge->nh_list); + nexthop_put(nhge->nh); if (nlinfo) nexthop_notify(RTM_NEWNEXTHOP, nhp, nlinfo); - - /* if this group has no more entries then remove it */ - if (!nhg->num_nh) - remove_nexthop(net, nhp, nlinfo); } static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh, @@ -746,6 +760,9 @@ static void remove_nexthop_from_groups(struct net *net, struct nexthop *nh, list_for_each_entry_safe(nhge, tmp, &nh->grp_list, nh_list) remove_nh_grp_entry(net, nhge, nlinfo); + + /* make sure all see the newly published array before releasing rtnl */ + synchronize_rcu(); } static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo) @@ -759,10 +776,7 @@ static void remove_nexthop_group(struct nexthop *nh, struct nl_info *nlinfo) if (WARN_ON(!nhge->nh)) continue; - list_del(&nhge->nh_list); - nexthop_put(nhge->nh); - nhge->nh = NULL; - nhg->num_nh--; + list_del_init(&nhge->nh_list); } } @@ -1085,6 +1099,7 @@ static struct nexthop *nexthop_create_group(struct net *net, { struct nlattr *grps_attr = cfg->nh_grp; struct nexthop_grp *entry = nla_data(grps_attr); + u16 num_nh = nla_len(grps_attr) / sizeof(*entry); struct nh_group *nhg; struct nexthop *nh; int i; @@ -1095,12 +1110,21 @@ static struct nexthop *nexthop_create_group(struct net *net, nh->is_group = 1; - nhg = nexthop_grp_alloc(nla_len(grps_attr) / sizeof(*entry)); + nhg = nexthop_grp_alloc(num_nh); if (!nhg) { kfree(nh); return ERR_PTR(-ENOMEM); } + /* spare group used for removals */ + nhg->spare = nexthop_grp_alloc(num_nh); + if (!nhg) { + kfree(nhg); + kfree(nh); + return NULL; + } + nhg->spare->spare = nhg; + for (i = 0; i < nhg->num_nh; ++i) { struct nexthop *nhe; struct nh_info *nhi; @@ -1132,6 +1156,7 @@ out_no_nh: for (; i >= 0; --i) nexthop_put(nhg->nh_entries[i].nh); + kfree(nhg->spare); kfree(nhg); kfree(nh); -- cgit v1.2.3-58-ga151 From 0b5e2e39739e861fa5fc84ab27a35dbe62a15330 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 May 2020 12:56:16 -0600 Subject: nexthop: Expand nexthop_is_multipath in a few places I got too fancy consolidating checks on multipath type. The result is that path lookups can access 2 different nh_grp structs as exposed by Nik's torture tests. Expand nexthop_is_multipath within nexthop.h to avoid multiple, nh_grp dereferences and make decisions based on the consistent struct. Only 2 places left using nexthop_is_multipath are within IPv6, both only check that the nexthop is a multipath for a branching decision which are acceptable. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/net/nexthop.h | 41 +++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) diff --git a/include/net/nexthop.h b/include/net/nexthop.h index 8a343519ed7a..f09e8d7d9886 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -137,21 +137,20 @@ static inline unsigned int nexthop_num_path(const struct nexthop *nh) { unsigned int rc = 1; - if (nexthop_is_multipath(nh)) { + if (nh->is_group) { struct nh_group *nh_grp; nh_grp = rcu_dereference_rtnl(nh->nh_grp); - rc = nh_grp->num_nh; + if (nh_grp->mpath) + rc = nh_grp->num_nh; } return rc; } static inline -struct nexthop *nexthop_mpath_select(const struct nexthop *nh, int nhsel) +struct nexthop *nexthop_mpath_select(const struct nh_group *nhg, int nhsel) { - const struct nh_group *nhg = rcu_dereference_rtnl(nh->nh_grp); - /* for_nexthops macros in fib_semantics.c grabs a pointer to * the nexthop before checking nhsel */ @@ -186,12 +185,14 @@ static inline bool nexthop_is_blackhole(const struct nexthop *nh) { const struct nh_info *nhi; - if (nexthop_is_multipath(nh)) { - if (nexthop_num_path(nh) > 1) - return false; - nh = nexthop_mpath_select(nh, 0); - if (!nh) + if (nh->is_group) { + struct nh_group *nh_grp; + + nh_grp = rcu_dereference_rtnl(nh->nh_grp); + if (nh_grp->num_nh > 1) return false; + + nh = nh_grp->nh_entries[0].nh; } nhi = rcu_dereference_rtnl(nh->nh_info); @@ -217,10 +218,15 @@ struct fib_nh_common *nexthop_fib_nhc(struct nexthop *nh, int nhsel) BUILD_BUG_ON(offsetof(struct fib_nh, nh_common) != 0); BUILD_BUG_ON(offsetof(struct fib6_nh, nh_common) != 0); - if (nexthop_is_multipath(nh)) { - nh = nexthop_mpath_select(nh, nhsel); - if (!nh) - return NULL; + if (nh->is_group) { + struct nh_group *nh_grp; + + nh_grp = rcu_dereference_rtnl(nh->nh_grp); + if (nh_grp->mpath) { + nh = nexthop_mpath_select(nh_grp, nhsel); + if (!nh) + return NULL; + } } nhi = rcu_dereference_rtnl(nh->nh_info); @@ -264,8 +270,11 @@ static inline struct fib6_nh *nexthop_fib6_nh(struct nexthop *nh) { struct nh_info *nhi; - if (nexthop_is_multipath(nh)) { - nh = nexthop_mpath_select(nh, 0); + if (nh->is_group) { + struct nh_group *nh_grp; + + nh_grp = rcu_dereference_rtnl(nh->nh_grp); + nh = nexthop_mpath_select(nh_grp, 0); if (!nh) return NULL; } -- cgit v1.2.3-58-ga151 From af7888ad9edbd8ba7f6449d1c27ce281ad4b26fd Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 May 2020 12:56:17 -0600 Subject: ipv4: Refactor nhc evaluation in fib_table_lookup FIB lookups can return an entry that references an external nexthop. While walking the nexthop struct we do not want to make multiple calls into the nexthop code which can result in 2 different structs getting accessed - one returning the number of paths the rest of the loop seeing a different nh_grp struct. If the nexthop group shrunk, the result is an attempt to access a fib_nh_common that does not exist for the new nh_grp struct but did for the old one. To fix that move the device evaluation code to a helper that can be used for inline fib_nh path as well as external nexthops. Update the existing check for fi->nh in fib_table_lookup to call a new helper, nexthop_get_nhc_lookup, which walks the external nexthop with a single rcu dereference. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/net/ip_fib.h | 2 ++ include/net/nexthop.h | 33 +++++++++++++++++++++++++++++++++ net/ipv4/fib_trie.c | 51 ++++++++++++++++++++++++++++++++++++--------------- 3 files changed, 71 insertions(+), 15 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index b219a8fe0950..771ce068bc96 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -479,6 +479,8 @@ void fib_nh_common_release(struct fib_nh_common *nhc); void fib_alias_hw_flags_set(struct net *net, const struct fib_rt_info *fri); void fib_trie_init(void); struct fib_table *fib_trie_table(u32 id, struct fib_table *alias); +bool fib_lookup_good_nhc(const struct fib_nh_common *nhc, int fib_flags, + const struct flowi4 *flp); static inline void fib_combine_itag(u32 *itag, const struct fib_result *res) { diff --git a/include/net/nexthop.h b/include/net/nexthop.h index f09e8d7d9886..9414ae46fc1c 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -233,6 +233,39 @@ struct fib_nh_common *nexthop_fib_nhc(struct nexthop *nh, int nhsel) return &nhi->fib_nhc; } +/* called from fib_table_lookup with rcu_lock */ +static inline +struct fib_nh_common *nexthop_get_nhc_lookup(const struct nexthop *nh, + int fib_flags, + const struct flowi4 *flp, + int *nhsel) +{ + struct nh_info *nhi; + + if (nh->is_group) { + struct nh_group *nhg = rcu_dereference(nh->nh_grp); + int i; + + for (i = 0; i < nhg->num_nh; i++) { + struct nexthop *nhe = nhg->nh_entries[i].nh; + + nhi = rcu_dereference(nhe->nh_info); + if (fib_lookup_good_nhc(&nhi->fib_nhc, fib_flags, flp)) { + *nhsel = i; + return &nhi->fib_nhc; + } + } + } else { + nhi = rcu_dereference(nh->nh_info); + if (fib_lookup_good_nhc(&nhi->fib_nhc, fib_flags, flp)) { + *nhsel = 0; + return &nhi->fib_nhc; + } + } + + return NULL; +} + static inline unsigned int fib_info_num_path(const struct fib_info *fi) { if (unlikely(fi->nh)) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 4f334b425538..248f1c1959a6 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1371,6 +1371,26 @@ static inline t_key prefix_mismatch(t_key key, struct key_vector *n) return (key ^ prefix) & (prefix | -prefix); } +bool fib_lookup_good_nhc(const struct fib_nh_common *nhc, int fib_flags, + const struct flowi4 *flp) +{ + if (nhc->nhc_flags & RTNH_F_DEAD) + return false; + + if (ip_ignore_linkdown(nhc->nhc_dev) && + nhc->nhc_flags & RTNH_F_LINKDOWN && + !(fib_flags & FIB_LOOKUP_IGNORE_LINKSTATE)) + return false; + + if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) { + if (flp->flowi4_oif && + flp->flowi4_oif != nhc->nhc_oif) + return false; + } + + return true; +} + /* should be called with rcu_read_lock */ int fib_table_lookup(struct fib_table *tb, const struct flowi4 *flp, struct fib_result *res, int fib_flags) @@ -1503,6 +1523,7 @@ found: /* Step 3: Process the leaf, if that fails fall back to backtracing */ hlist_for_each_entry_rcu(fa, &n->leaf, fa_list) { struct fib_info *fi = fa->fa_info; + struct fib_nh_common *nhc; int nhsel, err; if ((BITS_PER_LONG > KEYLENGTH) || (fa->fa_slen < KEYLENGTH)) { @@ -1528,26 +1549,25 @@ out_reject: if (fi->fib_flags & RTNH_F_DEAD) continue; - if (unlikely(fi->nh && nexthop_is_blackhole(fi->nh))) { - err = fib_props[RTN_BLACKHOLE].error; - goto out_reject; + if (unlikely(fi->nh)) { + if (nexthop_is_blackhole(fi->nh)) { + err = fib_props[RTN_BLACKHOLE].error; + goto out_reject; + } + + nhc = nexthop_get_nhc_lookup(fi->nh, fib_flags, flp, + &nhsel); + if (nhc) + goto set_result; + goto miss; } for (nhsel = 0; nhsel < fib_info_num_path(fi); nhsel++) { - struct fib_nh_common *nhc = fib_info_nhc(fi, nhsel); + nhc = fib_info_nhc(fi, nhsel); - if (nhc->nhc_flags & RTNH_F_DEAD) + if (!fib_lookup_good_nhc(nhc, fib_flags, flp)) continue; - if (ip_ignore_linkdown(nhc->nhc_dev) && - nhc->nhc_flags & RTNH_F_LINKDOWN && - !(fib_flags & FIB_LOOKUP_IGNORE_LINKSTATE)) - continue; - if (!(flp->flowi4_flags & FLOWI_FLAG_SKIP_NH_OIF)) { - if (flp->flowi4_oif && - flp->flowi4_oif != nhc->nhc_oif) - continue; - } - +set_result: if (!(fib_flags & FIB_LOOKUP_NOREF)) refcount_inc(&fi->fib_clntref); @@ -1568,6 +1588,7 @@ out_reject: return err; } } +miss: #ifdef CONFIG_IP_FIB_TRIE_STATS this_cpu_inc(stats->semantic_match_miss); #endif -- cgit v1.2.3-58-ga151 From 1fd1c768f3624a5e66766e7b4ddb9b607cd834a5 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 26 May 2020 12:56:18 -0600 Subject: ipv4: nexthop version of fib_info_nh_uses_dev Similar to the last path, need to fix fib_info_nh_uses_dev for external nexthops to avoid referencing multiple nh_grp structs. Move the device check in fib_info_nh_uses_dev to a helper and create a nexthop version that is called if the fib_info uses an external nexthop. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: David Ahern Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/net/ip_fib.h | 10 ++++++++++ include/net/nexthop.h | 25 +++++++++++++++++++++++++ net/ipv4/fib_frontend.c | 19 ++++++++++--------- 3 files changed, 45 insertions(+), 9 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 771ce068bc96..2ec062aaa978 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -447,6 +447,16 @@ static inline int fib_num_tclassid_users(struct net *net) #endif int fib_unmerge(struct net *net); +static inline bool nhc_l3mdev_matches_dev(const struct fib_nh_common *nhc, +const struct net_device *dev) +{ + if (nhc->nhc_dev == dev || + l3mdev_master_ifindex_rcu(nhc->nhc_dev) == dev->ifindex) + return true; + + return false; +} + /* Exported by fib_semantics.c */ int ip_fib_check_default(__be32 gw, struct net_device *dev); int fib_sync_down_dev(struct net_device *dev, unsigned long event, bool force); diff --git a/include/net/nexthop.h b/include/net/nexthop.h index 9414ae46fc1c..8c9f1a718859 100644 --- a/include/net/nexthop.h +++ b/include/net/nexthop.h @@ -266,6 +266,31 @@ struct fib_nh_common *nexthop_get_nhc_lookup(const struct nexthop *nh, return NULL; } +static inline bool nexthop_uses_dev(const struct nexthop *nh, + const struct net_device *dev) +{ + struct nh_info *nhi; + + if (nh->is_group) { + struct nh_group *nhg = rcu_dereference(nh->nh_grp); + int i; + + for (i = 0; i < nhg->num_nh; i++) { + struct nexthop *nhe = nhg->nh_entries[i].nh; + + nhi = rcu_dereference(nhe->nh_info); + if (nhc_l3mdev_matches_dev(&nhi->fib_nhc, dev)) + return true; + } + } else { + nhi = rcu_dereference(nh->nh_info); + if (nhc_l3mdev_matches_dev(&nhi->fib_nhc, dev)) + return true; + } + + return false; +} + static inline unsigned int fib_info_num_path(const struct fib_info *fi) { if (unlikely(fi->nh)) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 1bf9da3a75f9..41079490a118 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -309,17 +309,18 @@ bool fib_info_nh_uses_dev(struct fib_info *fi, const struct net_device *dev) { bool dev_match = false; #ifdef CONFIG_IP_ROUTE_MULTIPATH - int ret; + if (unlikely(fi->nh)) { + dev_match = nexthop_uses_dev(fi->nh, dev); + } else { + int ret; - for (ret = 0; ret < fib_info_num_path(fi); ret++) { - const struct fib_nh_common *nhc = fib_info_nhc(fi, ret); + for (ret = 0; ret < fib_info_num_path(fi); ret++) { + const struct fib_nh_common *nhc = fib_info_nhc(fi, ret); - if (nhc->nhc_dev == dev) { - dev_match = true; - break; - } else if (l3mdev_master_ifindex_rcu(nhc->nhc_dev) == dev->ifindex) { - dev_match = true; - break; + if (nhc_l3mdev_matches_dev(nhc, dev)) { + dev_match = true; + break; + } } } #else -- cgit v1.2.3-58-ga151 From f2fb6b6275eba9d312957ca44c487bd780da6169 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 25 May 2020 16:18:14 +0800 Subject: net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For rx filter 'HWTSTAMP_FILTER_PTP_V2_EVENT', it should be PTP v2/802.AS1, any layer, any kind of event packet, but HW only take timestamp snapshot for below PTP message: sync, Pdelay_req, Pdelay_resp. Then it causes below issue when test E2E case: ptp4l[2479.534]: port 1: received DELAY_REQ without timestamp ptp4l[2481.423]: port 1: received DELAY_REQ without timestamp ptp4l[2481.758]: port 1: received DELAY_REQ without timestamp ptp4l[2483.524]: port 1: received DELAY_REQ without timestamp ptp4l[2484.233]: port 1: received DELAY_REQ without timestamp ptp4l[2485.750]: port 1: received DELAY_REQ without timestamp ptp4l[2486.888]: port 1: received DELAY_REQ without timestamp ptp4l[2487.265]: port 1: received DELAY_REQ without timestamp ptp4l[2487.316]: port 1: received DELAY_REQ without timestamp Timestamp snapshot dependency on register bits in received path: SNAPTYPSEL TSMSTRENA TSEVNTENA PTP_Messages 01 x 0 SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up 01 0 1 SYNC, Pdelay_Req, Pdelay_Resp For dwmac v5.10a, enabling all events by setting register DWC_EQOS_TIME_STAMPING[SNAPTYPSEL] to 2’b01, clearing bit [TSEVNTENA] to 0’b0, which can support all required events. Signed-off-by: Fugang Duan Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 1f319c9cee46..7e9cbfd23530 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -630,7 +630,8 @@ static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; ptp_v2 = PTP_TCR_TSVER2ENA; snap_type_sel = PTP_TCR_SNAPTYPSEL_1; - ts_event_en = PTP_TCR_TSEVNTENA; + if (priv->synopsys_id != DWMAC_CORE_5_10) + ts_event_en = PTP_TCR_TSEVNTENA; ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA; ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA; ptp_over_ethernet = PTP_TCR_TSIPENA; -- cgit v1.2.3-58-ga151 From 3a4ef4ca1166d4bad5649c27028906ea92324cc3 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sat, 23 May 2020 00:09:47 -0400 Subject: clk: qcom: sm8250 gcc depends on QCOM_GDSC The driver will always fail to probe without QCOM_GDSC, so select it. Signed-off-by: Jonathan Marek Link: https://lkml.kernel.org/r/20200523040947.31946-1-jonathan@marek.ca Reviewed-by: Bjorn Andersson Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250") Signed-off-by: Stephen Boyd --- drivers/clk/qcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 11ec6f466467..abb121f8de52 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -377,6 +377,7 @@ config SM_GCC_8150 config SM_GCC_8250 tristate "SM8250 Global Clock Controller" + select QCOM_GDSC help Support for the global clock controller on SM8250 devices. Say Y if you want to use peripheral devices such as UART, -- cgit v1.2.3-58-ga151 From a76f274182f054481182c81cd62bb8794a5450a6 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Thu, 21 May 2020 10:57:28 +0530 Subject: clk: qcom: gcc: Fix parent for gpll0_out_even Documentation says that gpll0 is parent of gpll0_out_even, somehow driver coded that as bi_tcxo, so fix it Fixes: 2a1d7eb854bb ("clk: qcom: gcc: Add global clock controller driver for SM8150") Reported-by: Jonathan Marek Signed-off-by: Vinod Koul Link: https://lkml.kernel.org/r/20200521052728.2141377-1-vkoul@kernel.org Reviewed-by: Bjorn Andersson Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-sm8150.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c index ef98fdc51755..732bc7c937e6 100644 --- a/drivers/clk/qcom/gcc-sm8150.c +++ b/drivers/clk/qcom/gcc-sm8150.c @@ -76,8 +76,7 @@ static struct clk_alpha_pll_postdiv gpll0_out_even = { .clkr.hw.init = &(struct clk_init_data){ .name = "gpll0_out_even", .parent_data = &(const struct clk_parent_data){ - .fw_name = "bi_tcxo", - .name = "bi_tcxo", + .hw = &gpll0.clkr.hw, }, .num_parents = 1, .ops = &clk_trion_pll_postdiv_ops, -- cgit v1.2.3-58-ga151 From 0a82e230c68860b7286dad8644d9d9f7cfd755d2 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Mon, 25 May 2020 16:38:47 +0200 Subject: mptcp: avoid NULL-ptr derefence on fallback In the MPTCP receive path we must cope with TCP fallback on blocking recvmsg(). Currently in such code path we detect the fallback condition, but we don't fetch the struct socket required for fallback. The above allowed syzkaller to trigger a NULL pointer dereference: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 7226 Comm: syz-executor523 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:sock_recvmsg_nosec net/socket.c:886 [inline] RIP: 0010:sock_recvmsg+0x92/0x110 net/socket.c:904 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 44 89 6c 24 04 e8 53 18 1d fb 4d 8d 6f 20 4c 89 e8 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 ef e8 20 12 5b fb bd a0 00 00 00 49 03 6d RSP: 0018:ffffc90001077b98 EFLAGS: 00010202 RAX: 0000000000000004 RBX: ffffc90001077dc0 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff86565e59 R09: ffffed10115afeaa R10: ffffed10115afeaa R11: 0000000000000000 R12: 1ffff9200020efbc R13: 0000000000000020 R14: ffffc90001077de0 R15: 0000000000000000 FS: 00007fc6a3abe700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d0050 CR3: 00000000969f0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mptcp_recvmsg+0x18d5/0x19b0 net/mptcp/protocol.c:891 inet_recvmsg+0xf6/0x1d0 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:886 [inline] sock_recvmsg net/socket.c:904 [inline] __sys_recvfrom+0x2f3/0x470 net/socket.c:2057 __do_sys_recvfrom net/socket.c:2075 [inline] __se_sys_recvfrom net/socket.c:2071 [inline] __x64_sys_recvfrom+0xda/0xf0 net/socket.c:2071 do_syscall_64+0xf3/0x1b0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Address the issue initializing the struct socket reference before entering the fallback code. Reported-and-tested-by: syzbot+c6bfc3db991edc918432@syzkaller.appspotmail.com Suggested-by: Ondrej Mosnacek Fixes: 8ab183deb26a ("mptcp: cope with later TCP fallback") Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 32ea8d35489a..c8675d2eb5b9 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -954,7 +954,8 @@ fallback: pr_debug("block timeout %ld", timeo); mptcp_wait_data(sk, &timeo); - if (unlikely(__mptcp_tcp_fallback(msk))) + ssock = __mptcp_tcp_fallback(msk); + if (unlikely(ssock)) goto fallback; } -- cgit v1.2.3-58-ga151 From 6dd912f82680761d8fb6b1bb274a69d4c7010988 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 25 May 2020 15:07:40 -0400 Subject: net: check untrusted gso_size at kernel entry Syzkaller again found a path to a kernel crash through bad gso input: a packet with gso size exceeding len. These packets are dropped in tcp_gso_segment and udp[46]_ufo_fragment. But they may affect gso size calculations earlier in the path. Now that we have thlen as of commit 9274124f023b ("net: stricter validation of untrusted gso packets"), check gso_size at entry too. Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.") Reported-by: syzbot Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/virtio_net.h | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 6f6ade63b04c..88997022a4b5 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -31,6 +31,7 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, { unsigned int gso_type = 0; unsigned int thlen = 0; + unsigned int p_off = 0; unsigned int ip_proto; if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { @@ -68,7 +69,8 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, if (!skb_partial_csum_set(skb, start, off)) return -EINVAL; - if (skb_transport_offset(skb) + thlen > skb_headlen(skb)) + p_off = skb_transport_offset(skb) + thlen; + if (p_off > skb_headlen(skb)) return -EINVAL; } else { /* gso packets without NEEDS_CSUM do not set transport_offset. @@ -92,17 +94,25 @@ retry: return -EINVAL; } - if (keys.control.thoff + thlen > skb_headlen(skb) || + p_off = keys.control.thoff + thlen; + if (p_off > skb_headlen(skb) || keys.basic.ip_proto != ip_proto) return -EINVAL; skb_set_transport_header(skb, keys.control.thoff); + } else if (gso_type) { + p_off = thlen; + if (p_off > skb_headlen(skb)) + return -EINVAL; } } if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); + if (skb->len - p_off <= gso_size) + return -EINVAL; + skb_shinfo(skb)->gso_size = gso_size; skb_shinfo(skb)->gso_type = gso_type; -- cgit v1.2.3-58-ga151 From 591612aa578cd7148b7b9d74869ef40118978389 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Mon, 25 May 2020 23:25:37 +0200 Subject: net: usb: qmi_wwan: add Telit LE910C1-EUX composition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for Telit LE910C1-EUX composition 0x1031: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 4bb8552a00d3..4a2c7355be63 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1324,6 +1324,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */ -- cgit v1.2.3-58-ga151 From b8056e8434b037fdab08158fea99ed7bc8ef3a74 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 25 May 2020 17:41:17 -0400 Subject: bnxt_en: Fix accumulation of bp->net_stats_prev. We have logic to maintain network counters across resets by storing the counters in bp->net_stats_prev before reset. But not all resets will clear the counters. Certain resets that don't need to change the number of rings do not clear the counters. The current logic accumulates the counters before all resets, causing big jumps in the counters after some resets, such as ethtool -G. Fix it by only accumulating the counters during reset if the irq_re_init parameter is set. The parameter signifies that all rings and interrupts will be reset and that means that the counters will also be reset. Reported-by: Vijayendra Suman Fixes: b8875ca356f1 ("bnxt_en: Save ring statistics before reset.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index d1a83716d934..abb203c019ce 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -9310,7 +9310,7 @@ static void __bnxt_close_nic(struct bnxt *bp, bool irq_re_init, bnxt_free_skbs(bp); /* Save ring stats before shutdown */ - if (bp->bnapi) + if (bp->bnapi && irq_re_init) bnxt_get_ring_stats(bp, &bp->net_stats_prev); if (irq_re_init) { bnxt_free_irq(bp); -- cgit v1.2.3-58-ga151 From 95ec1f470b976858264d7635a6ef76bc33c3875b Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Mon, 25 May 2020 17:41:18 -0400 Subject: bnxt_en: Fix return code to "flash_device". When NVRAM directory is not found, return the error code properly as per firmware command failure instead of the hardcode -ENOBUFS. Fixes: 3a707bed13b7 ("bnxt_en: Return -EAGAIN if fw command returns BUSY") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 34046a6286e8..360f9a95c1d5 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -2012,11 +2012,12 @@ int bnxt_flash_package_from_file(struct net_device *dev, const char *filename, bnxt_hwrm_fw_set_time(bp); - if (bnxt_find_nvram_item(dev, BNX_DIR_TYPE_UPDATE, - BNX_DIR_ORDINAL_FIRST, BNX_DIR_EXT_NONE, - &index, &item_len, NULL) != 0) { + rc = bnxt_find_nvram_item(dev, BNX_DIR_TYPE_UPDATE, + BNX_DIR_ORDINAL_FIRST, BNX_DIR_EXT_NONE, + &index, &item_len, NULL); + if (rc) { netdev_err(dev, "PKG update area not created in nvram\n"); - return -ENOBUFS; + return rc; } rc = request_firmware(&fw, filename, &dev->dev); -- cgit v1.2.3-58-ga151 From 2a5a8800fa915bd9bc272c91ca64728e6aa84c0a Mon Sep 17 00:00:00 2001 From: Edwin Peer Date: Mon, 25 May 2020 17:41:19 -0400 Subject: bnxt_en: fix firmware message length endianness The explicit mask and shift is not the appropriate way to parse fields out of a little endian struct. The length field is internally __le16 and the strategy employed only happens to work on little endian machines because the offset used is actually incorrect (length is at offset 6). Also remove the related and no longer used definitions from bnxt.h. Fixes: 845adfe40c2a ("bnxt_en: Improve valid bit checking in firmware response message.") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 14 ++++---------- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 ----- 2 files changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index abb203c019ce..58e0d9a781e9 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4176,14 +4176,12 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, int i, intr_process, rc, tmo_count; struct input *req = msg; u32 *data = msg; - __le32 *resp_len; u8 *valid; u16 cp_ring_id, len = 0; struct hwrm_err_output *resp = bp->hwrm_cmd_resp_addr; u16 max_req_len = BNXT_HWRM_MAX_REQ_LEN; struct hwrm_short_input short_input = {0}; u32 doorbell_offset = BNXT_GRCPF_REG_CHIMP_COMM_TRIGGER; - u8 *resp_addr = (u8 *)bp->hwrm_cmd_resp_addr; u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM; u16 dst = BNXT_HWRM_CHNL_CHIMP; @@ -4201,7 +4199,6 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, bar_offset = BNXT_GRCPF_REG_KONG_COMM; doorbell_offset = BNXT_GRCPF_REG_KONG_COMM_TRIGGER; resp = bp->hwrm_cmd_kong_resp_addr; - resp_addr = (u8 *)bp->hwrm_cmd_kong_resp_addr; } memset(resp, 0, PAGE_SIZE); @@ -4270,7 +4267,6 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, tmo_count = HWRM_SHORT_TIMEOUT_COUNTER; timeout = timeout - HWRM_SHORT_MIN_TIMEOUT * HWRM_SHORT_TIMEOUT_COUNTER; tmo_count += DIV_ROUND_UP(timeout, HWRM_MIN_TIMEOUT); - resp_len = (__le32 *)(resp_addr + HWRM_RESP_LEN_OFFSET); if (intr_process) { u16 seq_id = bp->hwrm_intr_seq_id; @@ -4298,9 +4294,8 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, le16_to_cpu(req->req_type)); return -EBUSY; } - len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >> - HWRM_RESP_LEN_SFT; - valid = resp_addr + len - 1; + len = le16_to_cpu(resp->resp_len); + valid = ((u8 *)resp) + len - 1; } else { int j; @@ -4311,8 +4306,7 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, */ if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state)) return -EBUSY; - len = (le32_to_cpu(*resp_len) & HWRM_RESP_LEN_MASK) >> - HWRM_RESP_LEN_SFT; + len = le16_to_cpu(resp->resp_len); if (len) break; /* on first few passes, just barely sleep */ @@ -4334,7 +4328,7 @@ static int bnxt_hwrm_do_send_msg(struct bnxt *bp, void *msg, u32 msg_len, } /* Last byte of resp contains valid bit */ - valid = resp_addr + len - 1; + valid = ((u8 *)resp) + len - 1; for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) { /* make sure we read from updated DMA memory */ dma_rmb(); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index f6a3250ef1c5..3d39638521d6 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -656,11 +656,6 @@ struct nqe_cn { #define HWRM_CMD_TIMEOUT (bp->hwrm_cmd_timeout) #define HWRM_RESET_TIMEOUT ((HWRM_CMD_TIMEOUT) * 4) #define HWRM_COREDUMP_TIMEOUT ((HWRM_CMD_TIMEOUT) * 12) -#define HWRM_RESP_ERR_CODE_MASK 0xffff -#define HWRM_RESP_LEN_OFFSET 4 -#define HWRM_RESP_LEN_MASK 0xffff0000 -#define HWRM_RESP_LEN_SFT 16 -#define HWRM_RESP_VALID_MASK 0xff000000 #define BNXT_HWRM_REQ_MAX_SIZE 128 #define BNXT_HWRM_REQS_PER_PAGE (BNXT_PAGE_SIZE / \ BNXT_HWRM_REQ_MAX_SIZE) -- cgit v1.2.3-58-ga151 From 9a233d329ec5cd2dd64737d24018c1463ad88f26 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Tue, 26 May 2020 10:55:59 +1200 Subject: net: sctp: Fix spelling in Kconfig help Change 'handeled' to 'handled' in the Kconfig help for SCTP. Signed-off-by: Chris Packham Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/Kconfig b/net/sctp/Kconfig index 6e2eb1dd64ed..68934438ee19 100644 --- a/net/sctp/Kconfig +++ b/net/sctp/Kconfig @@ -31,7 +31,7 @@ menuconfig IP_SCTP homing at either or both ends of an association." To compile this protocol support as a module, choose M here: the - module will be called sctp. Debug messages are handeled by the + module will be called sctp. Debug messages are handled by the kernel's dynamic debugging framework. If in doubt, say N. -- cgit v1.2.3-58-ga151 From 7f5ad9c9003425175f46c94df380e8c9e558cfb5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 26 May 2020 10:28:10 +0200 Subject: ALSA: usb-audio: Quirks for Gigabyte TRX40 Aorus Master onboard audio Gigabyte TRX40 Aorus Master is equipped with two USB-audio devices, a Realtek ALC1220-VB codec (USB ID 0414:a001) and an ESS SABRE9218 DAC (USB ID 0414:a000). The latter serves solely for the headphone output on the front panel while the former serves for the rest I/Os (mostly for the I/Os in the rear panel but also including the front mic). Both chips do work more or less with the unmodified USB-audio driver, but there are a few glitches. The ALC1220-VB returns an error for an inquiry to some jacks, as already seen on other TRX40-based mobos. However this machine has a slightly incompatible configuration, hence the existing mapping cannot be used as is. Meanwhile the ESS chip seems working without any quirk. But since both audio devices don't provide any specific names, both cards appear as "USB-Audio", and it's quite confusing for users. This patch is an attempt to overcome those issues: - The specific mapping table for ALC1220-VB is provided, reducing the non-working nodes and renaming the badly chosen controls. The connector map isn't needed here unlike other TRX40 quirks. - For both USB IDs (0414:a000 and 0414:a001), provide specific card name strings, so that user-space can identify more easily; and more importantly, UCM profile can be applied to each. Reported-by: Linus Torvalds Cc: Link: https://lore.kernel.org/r/20200526082810.29506-1-tiwai@suse.de Signed-off-by: Takashi Iwai --- sound/usb/mixer_maps.c | 19 +++++++++++++++++++ sound/usb/quirks-table.h | 25 +++++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/sound/usb/mixer_maps.c b/sound/usb/mixer_maps.c index bfdc6ad52785..9af7aa93f6fa 100644 --- a/sound/usb/mixer_maps.c +++ b/sound/usb/mixer_maps.c @@ -397,6 +397,21 @@ static const struct usbmix_connector_map trx40_mobo_connector_map[] = { {} }; +/* Rear panel + front mic on Gigabyte TRX40 Aorus Master with ALC1220-VB */ +static const struct usbmix_name_map aorus_master_alc1220vb_map[] = { + { 17, NULL }, /* OT, IEC958?, disabled */ + { 19, NULL, 12 }, /* FU, Input Gain Pad - broken response, disabled */ + { 16, "Line Out" }, /* OT */ + { 22, "Line Out Playback" }, /* FU */ + { 7, "Line" }, /* IT */ + { 19, "Line Capture" }, /* FU */ + { 8, "Mic" }, /* IT */ + { 20, "Mic Capture" }, /* FU */ + { 9, "Front Mic" }, /* IT */ + { 21, "Front Mic Capture" }, /* FU */ + {} +}; + /* * Control map entries */ @@ -526,6 +541,10 @@ static const struct usbmix_ctl_map usbmix_ctl_maps[] = { .id = USB_ID(0x1b1c, 0x0a42), .map = corsair_virtuoso_map, }, + { /* Gigabyte TRX40 Aorus Master (rear panel + front mic) */ + .id = USB_ID(0x0414, 0xa001), + .map = aorus_master_alc1220vb_map, + }, { /* Gigabyte TRX40 Aorus Pro WiFi */ .id = USB_ID(0x0414, 0xa002), .map = trx40_mobo_map, diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 6313c30f5c85..eb89902a83be 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3566,4 +3566,29 @@ ALC1220_VB_DESKTOP(0x0db0, 0x543d), /* MSI TRX40 */ ALC1220_VB_DESKTOP(0x26ce, 0x0a01), /* Asrock TRX40 Creator */ #undef ALC1220_VB_DESKTOP +/* Two entries for Gigabyte TRX40 Aorus Master: + * TRX40 Aorus Master has two USB-audio devices, one for the front headphone + * with ESS SABRE9218 DAC chip, while another for the rest I/O (the rear + * panel and the front mic) with Realtek ALC1220-VB. + * Here we provide two distinct names for making UCM profiles easier. + */ +{ + USB_DEVICE(0x0414, 0xa000), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Gigabyte", + .product_name = "Aorus Master Front Headphone", + .profile_name = "Gigabyte-Aorus-Master-Front-Headphone", + .ifnum = QUIRK_NO_INTERFACE + } +}, +{ + USB_DEVICE(0x0414, 0xa001), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Gigabyte", + .product_name = "Aorus Master Main Audio", + .profile_name = "Gigabyte-Aorus-Master-Main-Audio", + .ifnum = QUIRK_NO_INTERFACE + } +}, + #undef USB_DEVICE_VENDOR_SPEC -- cgit v1.2.3-58-ga151 From 642aa86eaf8f1e6fe894f20fd7f12f0db52ee03c Mon Sep 17 00:00:00 2001 From: Dennis Kadioglu Date: Tue, 26 May 2020 23:03:13 -0700 Subject: Input: synaptics - add a second working PNP_ID for Lenovo T470s The Lenovo Thinkpad T470s I own has a different touchpad with "LEN007a" instead of the already included PNP ID "LEN006c". However, my touchpad seems to work well without any problems using RMI. So this patch adds the other PNP ID. Signed-off-by: Dennis Kadioglu Link: https://lore.kernel.org/r/ff770543cd53ae818363c0fe86477965@mail.eclipso.de Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 4d2036209b45..758dae8d6500 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -170,6 +170,7 @@ static const char * const smbus_pnp_ids[] = { "LEN005b", /* P50 */ "LEN005e", /* T560 */ "LEN006c", /* T470s */ + "LEN007a", /* T470s */ "LEN0071", /* T480 */ "LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */ "LEN0073", /* X1 Carbon G5 (Elantech) */ -- cgit v1.2.3-58-ga151 From a4976a3ef844c510ae9120290b23e9f3f47d6bce Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 26 May 2020 17:28:56 -0700 Subject: crypto: chelsio/chtls: properly set tp->lsndtime TCP tp->lsndtime unit/base is tcp_jiffies32, not tcp_time_stamp() Fixes: 36bedb3f2e5b ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Eric Dumazet Cc: Ayush Sawal Cc: Vinay Kumar Yadav Signed-off-by: David S. Miller --- drivers/crypto/chelsio/chtls/chtls_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/chelsio/chtls/chtls_io.c b/drivers/crypto/chelsio/chtls/chtls_io.c index dccef3a2908b..e1401d9cc756 100644 --- a/drivers/crypto/chelsio/chtls/chtls_io.c +++ b/drivers/crypto/chelsio/chtls/chtls_io.c @@ -682,7 +682,7 @@ int chtls_push_frames(struct chtls_sock *csk, int comp) make_tx_data_wr(sk, skb, immdlen, len, credits_needed, completion); tp->snd_nxt += len; - tp->lsndtime = tcp_time_stamp(tp); + tp->lsndtime = tcp_jiffies32; if (completion) ULP_SKB_CB(skb)->flags &= ~ULPCB_FLAG_NEED_HDR; } else { -- cgit v1.2.3-58-ga151 From 630e36126e420e1756378b3427b42711ce0b9ddd Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Wed, 27 May 2020 14:10:26 +0800 Subject: ALSA: hda/realtek - Add new codec supported for ALC287 Enable new codec supported for ALC287. Signed-off-by: Kailang Yang Cc: Link: https://lore.kernel.org/r/dcf5ce5507104d0589a917cbb71dc3c6@realtek.com Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 92c6e58c3862..e62d58872b6e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -384,6 +384,7 @@ static void alc_fill_eapd_coef(struct hda_codec *codec) case 0x10ec0282: case 0x10ec0283: case 0x10ec0286: + case 0x10ec0287: case 0x10ec0288: case 0x10ec0285: case 0x10ec0298: @@ -8292,6 +8293,7 @@ static int patch_alc269(struct hda_codec *codec) case 0x10ec0215: case 0x10ec0245: case 0x10ec0285: + case 0x10ec0287: case 0x10ec0289: spec->codec_variant = ALC269_TYPE_ALC215; spec->shutup = alc225_shutup; @@ -9570,6 +9572,7 @@ static const struct hda_device_id snd_hda_id_realtek[] = { HDA_CODEC_ENTRY(0x10ec0284, "ALC284", patch_alc269), HDA_CODEC_ENTRY(0x10ec0285, "ALC285", patch_alc269), HDA_CODEC_ENTRY(0x10ec0286, "ALC286", patch_alc269), + HDA_CODEC_ENTRY(0x10ec0287, "ALC287", patch_alc269), HDA_CODEC_ENTRY(0x10ec0288, "ALC288", patch_alc269), HDA_CODEC_ENTRY(0x10ec0289, "ALC289", patch_alc269), HDA_CODEC_ENTRY(0x10ec0290, "ALC290", patch_alc269), -- cgit v1.2.3-58-ga151 From 890bd0f8997ae6ac0a367dd5146154a3963306dd Mon Sep 17 00:00:00 2001 From: Jerry Lee Date: Mon, 18 May 2020 16:03:09 +0800 Subject: libceph: ignore pool overlay and cache logic on redirects OSD client should ignore cache/overlay flag if got redirect reply. Otherwise, the client hangs when the cache tier is in forward mode. [ idryomov: Redirects are effectively deprecated and no longer used or tested. The original tiering modes based on redirects are inherently flawed because redirects can race and reorder, potentially resulting in data corruption. The new proxy and readproxy tiering modes should be used instead of forward and readforward. Still marking for stable as obviously correct, though. ] Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/23296 URL: https://tracker.ceph.com/issues/36406 Signed-off-by: Jerry Lee Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- net/ceph/osd_client.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 998e26b75a78..1d4973f8cd7a 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -3649,7 +3649,9 @@ static void handle_reply(struct ceph_osd *osd, struct ceph_msg *msg) * supported. */ req->r_t.target_oloc.pool = m.redirect.oloc.pool; - req->r_flags |= CEPH_OSD_FLAG_REDIRECTED; + req->r_flags |= CEPH_OSD_FLAG_REDIRECTED | + CEPH_OSD_FLAG_IGNORE_OVERLAY | + CEPH_OSD_FLAG_IGNORE_CACHE; req->r_tid = 0; __submit_request(req, false); goto out_unlock_osdc; -- cgit v1.2.3-58-ga151 From fb33c114d3ed5bdac230716f5b0a93b56b92a90d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 20 May 2020 10:36:07 -0400 Subject: ceph: flush release queue when handling caps for unknown inode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's possible for the VFS to completely forget about an inode, but for it to still be sitting on the cap release queue. If the MDS sends the client a cap message for such an inode, it just ignores it today, which can lead to a stall of up to 5s until the cap release queue is flushed. If we get a cap message for an inode that can't be located, then go ahead and flush the cap release queue. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/45532 Fixes: 1e9c2eb6811e ("ceph: delete stale dentry when last reference is dropped") Reported-and-Tested-by: Andrej Filipčič Suggested-by: Yan, Zheng Signed-off-by: Jeff Layton Signed-off-by: Ilya Dryomov --- fs/ceph/caps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 5f3aa4d607de..f1acde6fb9a6 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -3991,7 +3991,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, __ceph_queue_cap_release(session, cap); spin_unlock(&session->s_cap_lock); } - goto done; + goto flush_cap_releases; } /* these will work even if we don't have a cap yet */ -- cgit v1.2.3-58-ga151 From 46c1e0621a72e0469ec4edfdb6ed4d387ec34f8a Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Wed, 27 May 2020 01:10:39 -0700 Subject: netfilter: conntrack: Pass value of ctinfo to __nf_conntrack_update Clang warns: net/netfilter/nf_conntrack_core.c:2068:21: warning: variable 'ctinfo' is uninitialized when used here [-Wuninitialized] nf_ct_set(skb, ct, ctinfo); ^~~~~~ net/netfilter/nf_conntrack_core.c:2024:2: note: variable 'ctinfo' is declared here enum ip_conntrack_info ctinfo; ^ 1 warning generated. nf_conntrack_update was split up into nf_conntrack_update and __nf_conntrack_update, where the assignment of ctinfo is in nf_conntrack_update but it is used in __nf_conntrack_update. Pass the value of ctinfo from nf_conntrack_update to __nf_conntrack_update so that uninitialized memory is not used and everything works properly. Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again") Link: https://github.com/ClangBuiltLinux/linux/issues/1039 Signed-off-by: Nathan Chancellor Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 08e0c19f6b39..e3b054a2f796 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2017,11 +2017,11 @@ static void nf_conntrack_attach(struct sk_buff *nskb, const struct sk_buff *skb) } static int __nf_conntrack_update(struct net *net, struct sk_buff *skb, - struct nf_conn *ct) + struct nf_conn *ct, + enum ip_conntrack_info ctinfo) { struct nf_conntrack_tuple_hash *h; struct nf_conntrack_tuple tuple; - enum ip_conntrack_info ctinfo; struct nf_nat_hook *nat_hook; unsigned int status; int dataoff; @@ -2146,7 +2146,7 @@ static int nf_conntrack_update(struct net *net, struct sk_buff *skb) return 0; if (!nf_ct_is_confirmed(ct)) { - err = __nf_conntrack_update(net, skb, ct); + err = __nf_conntrack_update(net, skb, ct, ctinfo); if (err < 0) return err; } -- cgit v1.2.3-58-ga151 From 94945ad2b330207cded0fd8d4abebde43a776dfb Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 27 May 2020 12:17:34 +0200 Subject: netfilter: conntrack: comparison of unsigned in cthelper confirmation net/netfilter/nf_conntrack_core.c: In function nf_confirm_cthelper: net/netfilter/nf_conntrack_core.c:2117:15: warning: comparison of unsigned expression in < 0 is always false [-Wtype-limits] 2117 | if (protoff < 0 || (frag_off & htons(~0x7)) != 0) | ^ ipv6_skip_exthdr() returns a signed integer. Reported-by: Colin Ian King Fixes: 703acd70f249 ("netfilter: nfnetlink_cthelper: unbreak userspace helper support") Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index e3b054a2f796..bb72ca5f3999 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2092,7 +2092,7 @@ static int nf_confirm_cthelper(struct sk_buff *skb, struct nf_conn *ct, { const struct nf_conntrack_helper *helper; const struct nf_conn_help *help; - unsigned int protoff; + int protoff; help = nfct_help(ct); if (!help) -- cgit v1.2.3-58-ga151 From 4946ea5c1237036155c3b3a24f049fd5f849f8f6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 27 May 2020 12:24:10 +0200 Subject: netfilter: nf_conntrack_pptp: fix compilation warning with W=1 build >> include/linux/netfilter/nf_conntrack_pptp.h:13:20: warning: 'const' type qualifier on return type has no effect [-Wignored-qualifiers] extern const char *const pptp_msg_name(u_int16_t msg); ^~~~~~ Reported-by: kbuild test robot Fixes: 4c559f15efcc ("netfilter: nf_conntrack_pptp: prevent buffer overflows in debug code") Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/nf_conntrack_pptp.h | 2 +- net/netfilter/nf_conntrack_pptp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_pptp.h b/include/linux/netfilter/nf_conntrack_pptp.h index 6a4ff6d5ebc2..a28aa289afdc 100644 --- a/include/linux/netfilter/nf_conntrack_pptp.h +++ b/include/linux/netfilter/nf_conntrack_pptp.h @@ -10,7 +10,7 @@ #include #include -extern const char *const pptp_msg_name(u_int16_t msg); +const char *pptp_msg_name(u_int16_t msg); /* state of the control session */ enum pptp_ctrlsess_state { diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index 7ad247784cfa..1f44d523b512 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -91,7 +91,7 @@ static const char *const pptp_msg_name_array[PPTP_MSG_MAX + 1] = { [PPTP_SET_LINK_INFO] = "SET_LINK_INFO" }; -const char *const pptp_msg_name(u_int16_t msg) +const char *pptp_msg_name(u_int16_t msg) { if (msg > PPTP_MSG_MAX) return pptp_msg_name_array[0]; -- cgit v1.2.3-58-ga151 From e18a8c104d777af46aa5c8573c8a19ba2b5de597 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 18 May 2020 14:08:54 +0200 Subject: ia64: Hide the archdata.iommu field behind generic IOMMU_API There is a generic, kernel wide configuration symbol for enabling the IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including INTEL_IOMMU driver) select it so use it here as well. This makes the conditional archdata.iommu field consistent with other platforms and also fixes any compile test builds of other IOMMU drivers, when INTEL_IOMMU is not selected). For the case when INTEL_IOMMU and COMPILE_TEST are not selected, this should create functionally equivalent code/choice. With COMPILE_TEST this field could appear if other IOMMU drivers are chosen but INTEL_IOMMU not. Reported-by: kbuild test robot Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200518120855.27822-1-krzk@kernel.org Signed-off-by: Joerg Roedel --- arch/ia64/include/asm/device.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h index 410a769ece95..3eb397415381 100644 --- a/arch/ia64/include/asm/device.h +++ b/arch/ia64/include/asm/device.h @@ -6,7 +6,7 @@ #define _ASM_IA64_DEVICE_H struct dev_archdata { -#ifdef CONFIG_INTEL_IOMMU +#ifdef CONFIG_IOMMU_API void *iommu; /* hook for IOMMU specific extension */ #endif }; -- cgit v1.2.3-58-ga151 From ed3119e45519880a246b085ba6a96aa1074da532 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 18 May 2020 14:08:55 +0200 Subject: x86: Hide the archdata.iommu field behind generic IOMMU_API There is a generic, kernel wide configuration symbol for enabling the IOMMU specific bits: CONFIG_IOMMU_API. Implementations (including INTEL_IOMMU and AMD_IOMMU driver) select it so use it here as well. This makes the conditional archdata.iommu field consistent with other platforms and also fixes any compile test builds of other IOMMU drivers, when INTEL_IOMMU or AMD_IOMMU are not selected). For the case when INTEL_IOMMU/AMD_IOMMU and COMPILE_TEST are not selected, this should create functionally equivalent code/choice. With COMPILE_TEST this field could appear if other IOMMU drivers are chosen but neither INTEL_IOMMU nor AMD_IOMMU are not. Reported-by: kbuild test robot Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski Acked-by: Borislav Petkov Link: https://lore.kernel.org/r/20200518120855.27822-2-krzk@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/device.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h index 7e31f7f1bb06..49bd6cf3eec9 100644 --- a/arch/x86/include/asm/device.h +++ b/arch/x86/include/asm/device.h @@ -3,7 +3,7 @@ #define _ASM_X86_DEVICE_H struct dev_archdata { -#if defined(CONFIG_INTEL_IOMMU) || defined(CONFIG_AMD_IOMMU) +#ifdef CONFIG_IOMMU_API void *iommu; /* hook for IOMMU specific extension */ #endif }; -- cgit v1.2.3-58-ga151 From f17936993af054b16725d0c54baa58115f9e052a Mon Sep 17 00:00:00 2001 From: Amir Goldstein Date: Wed, 27 May 2020 15:54:55 +0300 Subject: fanotify: turn off support for FAN_DIR_MODIFY FAN_DIR_MODIFY has been enabled by commit 44d705b0370b ("fanotify: report name info for FAN_DIR_MODIFY event") in 5.7-rc1. Now we are planning further extensions to the fanotify API and during that we realized that FAN_DIR_MODIFY may behave slightly differently to be more consistent with extensions we plan. So until we finalize these extensions, let's not bind our hands with exposing FAN_DIR_MODIFY to userland. Signed-off-by: Amir Goldstein Signed-off-by: Jan Kara --- fs/notify/fanotify/fanotify.c | 2 +- include/linux/fanotify.h | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c index 5435a40f82be..c18459cea6f4 100644 --- a/fs/notify/fanotify/fanotify.c +++ b/fs/notify/fanotify/fanotify.c @@ -520,7 +520,7 @@ static int fanotify_handle_event(struct fsnotify_group *group, BUILD_BUG_ON(FAN_OPEN_EXEC != FS_OPEN_EXEC); BUILD_BUG_ON(FAN_OPEN_EXEC_PERM != FS_OPEN_EXEC_PERM); - BUILD_BUG_ON(HWEIGHT32(ALL_FANOTIFY_EVENT_BITS) != 20); + BUILD_BUG_ON(HWEIGHT32(ALL_FANOTIFY_EVENT_BITS) != 19); mask = fanotify_group_event_mask(group, iter_info, mask, data, data_type); diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h index 3049a6c06d9e..b79fa9bb7359 100644 --- a/include/linux/fanotify.h +++ b/include/linux/fanotify.h @@ -47,8 +47,7 @@ * Directory entry modification events - reported only to directory * where entry is modified and not to a watching parent. */ -#define FANOTIFY_DIRENT_EVENTS (FAN_MOVE | FAN_CREATE | FAN_DELETE | \ - FAN_DIR_MODIFY) +#define FANOTIFY_DIRENT_EVENTS (FAN_MOVE | FAN_CREATE | FAN_DELETE) /* Events that can only be reported with data type FSNOTIFY_EVENT_INODE */ #define FANOTIFY_INODE_EVENTS (FANOTIFY_DIRENT_EVENTS | \ -- cgit v1.2.3-58-ga151 From c85f4abe66bea0b5db8d28d55da760c4fe0a0301 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 27 May 2020 16:55:34 +0300 Subject: RDMA/core: Fix double destruction of uobject Fix use after free when user user space request uobject concurrently for the same object, within the RCU grace period. In that case, remove_handle_idr_uobject() is called twice and we will have an extra put on the uobject which cause use after free. Fix it by leaving the uobject write locked after it was removed from the idr. Call to rdma_lookup_put_uobject with UVERBS_LOOKUP_DESTROY instead of UVERBS_LOOKUP_WRITE will do the work. refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 1381 at lib/refcount.c:28 refcount_warn_saturate+0xfe/0x1a0 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 1381 Comm: syz-executor.0 Not tainted 5.5.0-rc3 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x94/0xce panic+0x234/0x56f __warn+0x1cc/0x1e1 report_bug+0x200/0x310 fixup_bug.part.11+0x32/0x80 do_error_trap+0xd3/0x100 do_invalid_op+0x31/0x40 invalid_op+0x1e/0x30 RIP: 0010:refcount_warn_saturate+0xfe/0x1a0 Code: 0f 0b eb 9b e8 23 f6 6d ff 80 3d 6c d4 19 03 00 75 8d e8 15 f6 6d ff 48 c7 c7 c0 02 55 bd c6 05 57 d4 19 03 01 e8 a2 58 49 ff <0f> 0b e9 6e ff ff ff e8 f6 f5 6d ff 80 3d 42 d4 19 03 00 0f 85 5c RSP: 0018:ffffc90002df7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88810f6a193c RCX: ffffffffba649009 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88811b0283cc RBP: 0000000000000003 R08: ffffed10236060e3 R09: ffffed10236060e3 R10: 0000000000000001 R11: ffffed10236060e2 R12: ffff88810f6a193c R13: ffffc90002df7d60 R14: 0000000000000000 R15: ffff888116ae6a08 uverbs_uobject_put+0xfd/0x140 __uobj_perform_destroy+0x3d/0x60 ib_uverbs_close_xrcd+0x148/0x170 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f759d122c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bfa8 RCX: 0000000000465b49 RDX: 000000000000000c RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f759d1236bc R13: 00000000004ca27c R14: 000000000070de40 R15: 00000000ffffffff Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x39400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 7452a3c745a2 ("IB/uverbs: Allow RDMA_REMOVE_DESTROY to work concurrently with disassociate") Link: https://lore.kernel.org/r/20200527135534.482279-1-leon@kernel.org Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/rdma_core.c | 20 +++++++++++++------- include/rdma/uverbs_std_types.h | 2 +- 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c index bf8e149d3191..e0a5e897e4b1 100644 --- a/drivers/infiniband/core/rdma_core.c +++ b/drivers/infiniband/core/rdma_core.c @@ -153,9 +153,9 @@ static int uverbs_destroy_uobject(struct ib_uobject *uobj, uobj->context = NULL; /* - * For DESTROY the usecnt is held write locked, the caller is expected - * to put it unlock and put the object when done with it. Only DESTROY - * can remove the IDR handle. + * For DESTROY the usecnt is not changed, the caller is expected to + * manage it via uobj_put_destroy(). Only DESTROY can remove the IDR + * handle. */ if (reason != RDMA_REMOVE_DESTROY) atomic_set(&uobj->usecnt, 0); @@ -187,7 +187,7 @@ static int uverbs_destroy_uobject(struct ib_uobject *uobj, /* * This calls uverbs_destroy_uobject() using the RDMA_REMOVE_DESTROY * sequence. It should only be used from command callbacks. On success the - * caller must pair this with rdma_lookup_put_uobject(LOOKUP_WRITE). This + * caller must pair this with uobj_put_destroy(). This * version requires the caller to have already obtained an * LOOKUP_DESTROY uobject kref. */ @@ -198,6 +198,13 @@ int uobj_destroy(struct ib_uobject *uobj, struct uverbs_attr_bundle *attrs) down_read(&ufile->hw_destroy_rwsem); + /* + * Once the uobject is destroyed by RDMA_REMOVE_DESTROY then it is left + * write locked as the callers put it back with UVERBS_LOOKUP_DESTROY. + * This is because any other concurrent thread can still see the object + * in the xarray due to RCU. Leaving it locked ensures nothing else will + * touch it. + */ ret = uverbs_try_lock_object(uobj, UVERBS_LOOKUP_WRITE); if (ret) goto out_unlock; @@ -216,7 +223,7 @@ out_unlock: /* * uobj_get_destroy destroys the HW object and returns a handle to the uobj * with a NULL object pointer. The caller must pair this with - * uverbs_put_destroy. + * uobj_put_destroy(). */ struct ib_uobject *__uobj_get_destroy(const struct uverbs_api_object *obj, u32 id, struct uverbs_attr_bundle *attrs) @@ -250,8 +257,7 @@ int __uobj_perform_destroy(const struct uverbs_api_object *obj, u32 id, uobj = __uobj_get_destroy(obj, id, attrs); if (IS_ERR(uobj)) return PTR_ERR(uobj); - - rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_WRITE); + uobj_put_destroy(uobj); return 0; } diff --git a/include/rdma/uverbs_std_types.h b/include/rdma/uverbs_std_types.h index 1b28ce1aba07..325fdaa3bb66 100644 --- a/include/rdma/uverbs_std_types.h +++ b/include/rdma/uverbs_std_types.h @@ -88,7 +88,7 @@ struct ib_uobject *__uobj_get_destroy(const struct uverbs_api_object *obj, static inline void uobj_put_destroy(struct ib_uobject *uobj) { - rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_WRITE); + rdma_lookup_put_uobject(uobj, UVERBS_LOOKUP_DESTROY); } static inline void uobj_put_read(struct ib_uobject *uobj) -- cgit v1.2.3-58-ga151 From bb2f930d6dd708469a587dc9ed1efe1ef969c0bf Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Wed, 27 May 2020 02:04:26 +0200 Subject: net/sched: fix infinite loop in sch_fq_pie this command hangs forever: # tc qdisc add dev eth0 root fq_pie flows 65536 watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [tc:1028] [...] CPU: 1 PID: 1028 Comm: tc Not tainted 5.7.0-rc6+ #167 RIP: 0010:fq_pie_init+0x60e/0x8b7 [sch_fq_pie] Code: 4c 89 65 50 48 89 f8 48 c1 e8 03 42 80 3c 30 00 0f 85 2a 02 00 00 48 8d 7d 10 4c 89 65 58 48 89 f8 48 c1 e8 03 42 80 3c 30 00 <0f> 85 a7 01 00 00 48 8d 7d 18 48 c7 45 10 46 c3 23 00 48 89 f8 48 RSP: 0018:ffff888138d67468 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 1ffff9200018d2b2 RBX: ffff888139c1c400 RCX: ffffffffffffffff RDX: 000000000000c5e8 RSI: ffffc900000e5000 RDI: ffffc90000c69590 RBP: ffffc90000c69580 R08: fffffbfff79a9699 R09: fffffbfff79a9699 R10: 0000000000000700 R11: fffffbfff79a9698 R12: ffffc90000c695d0 R13: 0000000000000000 R14: dffffc0000000000 R15: 000000002347c5e8 FS: 00007f01e1850e40(0000) GS:ffff88814c880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000067c340 CR3: 000000013864c000 CR4: 0000000000340ee0 Call Trace: qdisc_create+0x3fd/0xeb0 tc_modify_qdisc+0x3be/0x14a0 rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x121/0x350 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 we can't accept 65536 as a valid number for 'nflows', because the loop on 'idx' in fq_pie_init() will never end. The extack message is correct, but it doesn't say that 0 is not a valid number for 'flows': while at it, fix this also. Add a tdc selftest to check correct validation of 'flows'. CC: Ivan Vecera Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti Reviewed-by: Ivan Vecera Signed-off-by: David S. Miller --- net/sched/sch_fq_pie.c | 4 ++-- .../tc-testing/tc-tests/qdiscs/fq_pie.json | 21 +++++++++++++++++++++ 2 files changed, 23 insertions(+), 2 deletions(-) create mode 100644 tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_pie.json diff --git a/net/sched/sch_fq_pie.c b/net/sched/sch_fq_pie.c index a9da8776bf5b..fb760cee824e 100644 --- a/net/sched/sch_fq_pie.c +++ b/net/sched/sch_fq_pie.c @@ -297,9 +297,9 @@ static int fq_pie_change(struct Qdisc *sch, struct nlattr *opt, goto flow_error; } q->flows_cnt = nla_get_u32(tb[TCA_FQ_PIE_FLOWS]); - if (!q->flows_cnt || q->flows_cnt > 65536) { + if (!q->flows_cnt || q->flows_cnt >= 65536) { NL_SET_ERR_MSG_MOD(extack, - "Number of flows must be < 65536"); + "Number of flows must range in [1..65535]"); goto flow_error; } } diff --git a/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_pie.json b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_pie.json new file mode 100644 index 000000000000..1cda2e11b3ad --- /dev/null +++ b/tools/testing/selftests/tc-testing/tc-tests/qdiscs/fq_pie.json @@ -0,0 +1,21 @@ +[ + { + "id": "83be", + "name": "Create FQ-PIE with invalid number of flows", + "category": [ + "qdisc", + "fq_pie" + ], + "setup": [ + "$IP link add dev $DUMMY type dummy || /bin/true" + ], + "cmdUnderTest": "$TC qdisc add dev $DUMMY root fq_pie flows 65536", + "expExitCode": "2", + "verifyCmd": "$TC qdisc show dev $DUMMY", + "matchPattern": "qdisc", + "matchCount": "0", + "teardown": [ + "$IP link del dev $DUMMY" + ] + } +] -- cgit v1.2.3-58-ga151 From 5b186cd60f033110960a3db424ffbd6de4cee528 Mon Sep 17 00:00:00 2001 From: Heinrich Kuhn Date: Wed, 27 May 2020 09:44:20 +0200 Subject: nfp: flower: fix used time of merge flow statistics Prior to this change the correct value for the used counter is calculated but not stored nor, therefore, propagated to user-space. In use-cases such as OVS use-case at least this results in active flows being removed from the hardware datapath. Which results in both unnecessary flow tear-down and setup, and packet processing on the host. This patch addresses the problem by saving the calculated used value which allows the value to propagate to user-space. Found by inspection. Fixes: aa6ce2ea0c93 ("nfp: flower: support stats update for merge flows") Signed-off-by: Heinrich Kuhn Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/offload.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/offload.c b/drivers/net/ethernet/netronome/nfp/flower/offload.c index c694dbc239d0..6b60771ccb19 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/offload.c +++ b/drivers/net/ethernet/netronome/nfp/flower/offload.c @@ -1440,7 +1440,8 @@ __nfp_flower_update_merge_stats(struct nfp_app *app, ctx_id = be32_to_cpu(sub_flow->meta.host_ctx_id); priv->stats[ctx_id].pkts += pkts; priv->stats[ctx_id].bytes += bytes; - max_t(u64, priv->stats[ctx_id].used, used); + priv->stats[ctx_id].used = max_t(u64, used, + priv->stats[ctx_id].used); } } -- cgit v1.2.3-58-ga151 From 7e0afbdfd13d1e708fe96e31c46c4897101a6a43 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Wed, 27 May 2020 09:56:55 +0200 Subject: vsock: fix timeout in vsock_accept() The accept(2) is an "input" socket interface, so we should use SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout. So this patch replace sock_sndtimeo() with sock_rcvtimeo() to use the right timeout in the vsock_accept(). Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Stefano Garzarella Reviewed-by: Jorgen Hansen Signed-off-by: David S. Miller --- net/vmw_vsock/af_vsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index a5f28708e0e7..626bf9044418 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1408,7 +1408,7 @@ static int vsock_accept(struct socket *sock, struct socket *newsock, int flags, /* Wait for children sockets to appear; these are the new sockets * created upon connection establishment. */ - timeout = sock_sndtimeo(listener, flags & O_NONBLOCK); + timeout = sock_rcvtimeo(listener, flags & O_NONBLOCK); prepare_to_wait(sk_sleep(listener), &wait, TASK_INTERRUPTIBLE); while ((connected = vsock_dequeue_accept(listener)) == NULL && -- cgit v1.2.3-58-ga151 From 9210c075cef29c1f764b4252f93105103bdfb292 Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Wed, 27 May 2020 09:13:52 -0700 Subject: nvme-pci: avoid race between nvme_reap_pending_cqes() and nvme_poll() There may be a race between nvme_reap_pending_cqes() and nvme_poll(), e.g., when doing live reset while polling the nvme device. CPU X CPU Y nvme_poll() nvme_dev_disable() -> nvme_stop_queues() -> nvme_suspend_io_queues() -> nvme_suspend_queue() -> spin_lock(&nvmeq->cq_poll_lock); -> nvme_reap_pending_cqes() -> nvme_process_cq() -> nvme_process_cq() In the above scenario, the nvme_process_cq() for the same queue may be running on both CPU X and CPU Y concurrently. It is much more easier to reproduce the issue when CONFIG_PREEMPT is enabled in kernel. When CONFIG_PREEMPT is disabled, it would take longer time for nvme_stop_queues()-->blk_mq_quiesce_queue() to wait for grace period. This patch protects nvme_process_cq() with nvmeq->cq_poll_lock in nvme_reap_pending_cqes(). Fixes: fa46c6fb5d61 ("nvme/pci: move cqe check after device shutdown") Signed-off-by: Dongli Zhang Reviewed-by: Ming Lei Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 3726dc780d15..cc46e250fcac 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1382,16 +1382,19 @@ static void nvme_disable_admin_queue(struct nvme_dev *dev, bool shutdown) /* * Called only on a device that has been disabled and after all other threads - * that can check this device's completion queues have synced. This is the - * last chance for the driver to see a natural completion before - * nvme_cancel_request() terminates all incomplete requests. + * that can check this device's completion queues have synced, except + * nvme_poll(). This is the last chance for the driver to see a natural + * completion before nvme_cancel_request() terminates all incomplete requests. */ static void nvme_reap_pending_cqes(struct nvme_dev *dev) { int i; - for (i = dev->ctrl.queue_count - 1; i > 0; i--) + for (i = dev->ctrl.queue_count - 1; i > 0; i--) { + spin_lock(&dev->queues[i].cq_poll_lock); nvme_process_cq(&dev->queues[i]); + spin_unlock(&dev->queues[i].cq_poll_lock); + } } static int nvme_cmb_qdepth(struct nvme_dev *dev, int nr_io_queues, -- cgit v1.2.3-58-ga151 From b3b6a84c6a920c60fd1393c43818b3955441424b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 27 May 2020 15:51:13 +0200 Subject: bridge: multicast: work around clang bug Clang-10 and clang-11 run into a corner case of the register allocator on 32-bit ARM, leading to excessive stack usage from register spilling: net/bridge/br_multicast.c:2422:6: error: stack frame size of 1472 bytes in function 'br_multicast_get_stats' [-Werror,-Wframe-larger-than=] Work around this by marking one of the internal functions as noinline_for_stack. Link: https://bugs.llvm.org/show_bug.cgi?id=45802#c9 Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index ad12fe3fca8c..83490bf73a13 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -2413,7 +2413,8 @@ void br_multicast_uninit_stats(struct net_bridge *br) free_percpu(br->mcast_stats); } -static void mcast_stats_add_dir(u64 *dst, u64 *src) +/* noinline for https://bugs.llvm.org/show_bug.cgi?id=45802#c9 */ +static noinline_for_stack void mcast_stats_add_dir(u64 *dst, u64 *src) { dst[BR_MCAST_DIR_RX] += src[BR_MCAST_DIR_RX]; dst[BR_MCAST_DIR_TX] += src[BR_MCAST_DIR_TX]; -- cgit v1.2.3-58-ga151 From 183be6f967fe37c3154bfac39e913c3bafe89d1b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 27 May 2020 19:48:03 +0300 Subject: net: dsa: felix: send VLANs on CPU port as egress-tagged As explained in other commits before (b9cd75e66895 and 87b0f983f66f), ocelot switches have a single egress-untagged VLAN per port, and the driver would deny adding a second one while an egress-untagged VLAN already exists. But on the CPU port (where the VLAN configuration is implicit, because there is no net device for the bridge to control), the DSA core attempts to add a VLAN using the same flags as were used for the front-panel port. This would make adding any untagged VLAN fail due to the CPU port rejecting the configuration: bridge vlan add dev swp0 vid 100 pvid untagged [ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1 [ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16 (note that port 5 is the CPU port and not the front-panel swp0). So this hardware will send all VLANs as tagged towards the CPU. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/ocelot/felix.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c index e8aae64db1ca..e113269c220a 100644 --- a/drivers/net/dsa/ocelot/felix.c +++ b/drivers/net/dsa/ocelot/felix.c @@ -102,13 +102,17 @@ static void felix_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan) { struct ocelot *ocelot = ds->priv; + u16 flags = vlan->flags; u16 vid; int err; + if (dsa_is_cpu_port(ds, port)) + flags &= ~BRIDGE_VLAN_INFO_UNTAGGED; + for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { err = ocelot_vlan_add(ocelot, port, vid, - vlan->flags & BRIDGE_VLAN_INFO_PVID, - vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED); + flags & BRIDGE_VLAN_INFO_PVID, + flags & BRIDGE_VLAN_INFO_UNTAGGED); if (err) { dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n", vid, port, err); -- cgit v1.2.3-58-ga151 From 9e4636545933131de15e1ecd06733538ae939b2f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 26 May 2020 18:39:49 -0400 Subject: copy_xstate_to_kernel(): don't leave parts of destination uninitialized copy the corresponding pieces of init_fpstate into the gaps instead. Cc: stable@kernel.org Tested-by: Alexander Potapenko Acked-by: Borislav Petkov Signed-off-by: Al Viro --- arch/x86/kernel/fpu/xstate.c | 86 ++++++++++++++++++++++++-------------------- 1 file changed, 48 insertions(+), 38 deletions(-) diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c index 32b153d38748..6a54e83d5589 100644 --- a/arch/x86/kernel/fpu/xstate.c +++ b/arch/x86/kernel/fpu/xstate.c @@ -957,18 +957,31 @@ static inline bool xfeatures_mxcsr_quirk(u64 xfeatures) return true; } -/* - * This is similar to user_regset_copyout(), but will not add offset to - * the source data pointer or increment pos, count, kbuf, and ubuf. - */ -static inline void -__copy_xstate_to_kernel(void *kbuf, const void *data, - unsigned int offset, unsigned int size, unsigned int size_total) +static void fill_gap(unsigned to, void **kbuf, unsigned *pos, unsigned *count) { - if (offset < size_total) { - unsigned int copy = min(size, size_total - offset); + if (*pos < to) { + unsigned size = to - *pos; + + if (size > *count) + size = *count; + memcpy(*kbuf, (void *)&init_fpstate.xsave + *pos, size); + *kbuf += size; + *pos += size; + *count -= size; + } +} - memcpy(kbuf + offset, data, copy); +static void copy_part(unsigned offset, unsigned size, void *from, + void **kbuf, unsigned *pos, unsigned *count) +{ + fill_gap(offset, kbuf, pos, count); + if (size > *count) + size = *count; + if (size) { + memcpy(*kbuf, from, size); + *kbuf += size; + *pos += size; + *count -= size; } } @@ -981,8 +994,9 @@ __copy_xstate_to_kernel(void *kbuf, const void *data, */ int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset_start, unsigned int size_total) { - unsigned int offset, size; struct xstate_header header; + const unsigned off_mxcsr = offsetof(struct fxregs_state, mxcsr); + unsigned count = size_total; int i; /* @@ -998,46 +1012,42 @@ int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int of header.xfeatures = xsave->header.xfeatures; header.xfeatures &= ~XFEATURE_MASK_SUPERVISOR; + if (header.xfeatures & XFEATURE_MASK_FP) + copy_part(0, off_mxcsr, + &xsave->i387, &kbuf, &offset_start, &count); + if (header.xfeatures & (XFEATURE_MASK_SSE | XFEATURE_MASK_YMM)) + copy_part(off_mxcsr, MXCSR_AND_FLAGS_SIZE, + &xsave->i387.mxcsr, &kbuf, &offset_start, &count); + if (header.xfeatures & XFEATURE_MASK_FP) + copy_part(offsetof(struct fxregs_state, st_space), 128, + &xsave->i387.st_space, &kbuf, &offset_start, &count); + if (header.xfeatures & XFEATURE_MASK_SSE) + copy_part(xstate_offsets[XFEATURE_MASK_SSE], 256, + &xsave->i387.xmm_space, &kbuf, &offset_start, &count); + /* + * Fill xsave->i387.sw_reserved value for ptrace frame: + */ + copy_part(offsetof(struct fxregs_state, sw_reserved), 48, + xstate_fx_sw_bytes, &kbuf, &offset_start, &count); /* * Copy xregs_state->header: */ - offset = offsetof(struct xregs_state, header); - size = sizeof(header); - - __copy_xstate_to_kernel(kbuf, &header, offset, size, size_total); + copy_part(offsetof(struct xregs_state, header), sizeof(header), + &header, &kbuf, &offset_start, &count); - for (i = 0; i < XFEATURE_MAX; i++) { + for (i = FIRST_EXTENDED_XFEATURE; i < XFEATURE_MAX; i++) { /* * Copy only in-use xstates: */ if ((header.xfeatures >> i) & 1) { void *src = __raw_xsave_addr(xsave, i); - offset = xstate_offsets[i]; - size = xstate_sizes[i]; - - /* The next component has to fit fully into the output buffer: */ - if (offset + size > size_total) - break; - - __copy_xstate_to_kernel(kbuf, src, offset, size, size_total); + copy_part(xstate_offsets[i], xstate_sizes[i], + src, &kbuf, &offset_start, &count); } } - - if (xfeatures_mxcsr_quirk(header.xfeatures)) { - offset = offsetof(struct fxregs_state, mxcsr); - size = MXCSR_AND_FLAGS_SIZE; - __copy_xstate_to_kernel(kbuf, &xsave->i387.mxcsr, offset, size, size_total); - } - - /* - * Fill xsave->i387.sw_reserved value for ptrace frame: - */ - offset = offsetof(struct fxregs_state, sw_reserved); - size = sizeof(xstate_fx_sw_bytes); - - __copy_xstate_to_kernel(kbuf, xstate_fx_sw_bytes, offset, size, size_total); + fill_gap(size_total, &kbuf, &offset_start, &count); return 0; } -- cgit v1.2.3-58-ga151 From 2b86cb8299765688c5119fd18d5f436716c81010 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Wed, 27 May 2020 21:08:05 +0300 Subject: net: dsa: declare lockless TX feature for slave ports Be there a platform with the following layout: Regular NIC | +----> DSA master for switch port | +----> DSA master for another switch port After changing DSA back to static lockdep class keys in commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), this kernel splat can be seen: [ 13.361198] ============================================ [ 13.366524] WARNING: possible recursive locking detected [ 13.371851] 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 Not tainted [ 13.377874] -------------------------------------------- [ 13.383201] swapper/0/0 is trying to acquire lock: [ 13.388004] ffff0000668ff298 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.397879] [ 13.397879] but task is already holding lock: [ 13.403727] ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.413593] [ 13.413593] other info that might help us debug this: [ 13.420140] Possible unsafe locking scenario: [ 13.420140] [ 13.426075] CPU0 [ 13.428523] ---- [ 13.430969] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.435946] lock(&dsa_slave_netdev_xmit_lock_key); [ 13.440924] [ 13.440924] *** DEADLOCK *** [ 13.440924] [ 13.446860] May be due to missing lock nesting notation [ 13.446860] [ 13.453668] 6 locks held by swapper/0/0: [ 13.457598] #0: ffff800010003de0 ((&idev->mc_ifc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x400 [ 13.466593] #1: ffffd4d3fb478700 (rcu_read_lock){....}-{1:2}, at: mld_sendpack+0x0/0x560 [ 13.474803] #2: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x64/0xb10 [ 13.483886] #3: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.492793] #4: ffff0000661a1698 (&dsa_slave_netdev_xmit_lock_key){+.-.}-{2:2}, at: __dev_queue_xmit+0x84c/0xbe0 [ 13.503094] #5: ffffd4d3fb478728 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x6c/0xbe0 [ 13.512000] [ 13.512000] stack backtrace: [ 13.516369] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc4-02121-gc32a05ecd7af-dirty #988 [ 13.530421] Call trace: [ 13.532871] dump_backtrace+0x0/0x1d8 [ 13.536539] show_stack+0x24/0x30 [ 13.539862] dump_stack+0xe8/0x150 [ 13.543271] __lock_acquire+0x1030/0x1678 [ 13.547290] lock_acquire+0xf8/0x458 [ 13.550873] _raw_spin_lock+0x44/0x58 [ 13.554543] __dev_queue_xmit+0x84c/0xbe0 [ 13.558562] dev_queue_xmit+0x24/0x30 [ 13.562232] dsa_slave_xmit+0xe0/0x128 [ 13.565988] dev_hard_start_xmit+0xf4/0x448 [ 13.570182] __dev_queue_xmit+0x808/0xbe0 [ 13.574200] dev_queue_xmit+0x24/0x30 [ 13.577869] neigh_resolve_output+0x15c/0x220 [ 13.582237] ip6_finish_output2+0x244/0xb10 [ 13.586430] __ip6_finish_output+0x1dc/0x298 [ 13.590709] ip6_output+0x84/0x358 [ 13.594116] mld_sendpack+0x2bc/0x560 [ 13.597786] mld_ifc_timer_expire+0x210/0x390 [ 13.602153] call_timer_fn+0xcc/0x400 [ 13.605822] run_timer_softirq+0x588/0x6e0 [ 13.609927] __do_softirq+0x118/0x590 [ 13.613597] irq_exit+0x13c/0x148 [ 13.616918] __handle_domain_irq+0x6c/0xc0 [ 13.621023] gic_handle_irq+0x6c/0x160 [ 13.624779] el1_irq+0xbc/0x180 [ 13.627927] cpuidle_enter_state+0xb4/0x4d0 [ 13.632120] cpuidle_enter+0x3c/0x50 [ 13.635703] call_cpuidle+0x44/0x78 [ 13.639199] do_idle+0x228/0x2c8 [ 13.642433] cpu_startup_entry+0x2c/0x48 [ 13.646363] rest_init+0x1ac/0x280 [ 13.649773] arch_call_rest_init+0x14/0x1c [ 13.653878] start_kernel+0x490/0x4bc Lockdep keys themselves were added in commit ab92d68fc22f ("net: core: add generic lockdep keys"), and it's very likely that this splat existed since then, but I have no real way to check, since this stacked platform wasn't supported by mainline back then. >From Taehee's own words: This patch was considered that all stackable devices have LLTX flag. But the dsa doesn't have LLTX, so this splat happened. After this patch, dsa shares the same lockdep class key. On the nested dsa interface architecture, which you illustrated, the same lockdep class key will be used in __dev_queue_xmit() because dsa doesn't have LLTX. So that lockdep detects deadlock because the same lockdep class key is used recursively although actually the different locks are used. There are some ways to fix this problem. 1. using NETIF_F_LLTX flag. If possible, using the LLTX flag is a very clear way for it. But I'm so sorry I don't know whether the dsa could have LLTX or not. 2. using dynamic lockdep again. It means that each interface uses a separate lockdep class key. So, lockdep will not detect recursive locking. But this way has a problem that it could consume lockdep class key too many. Currently, lockdep can have 8192 lockdep class keys. - you can see this number with the following command. cat /proc/lockdep_stats lock-classes: 1251 [max: 8192] ... The [max: 8192] means that the maximum number of lockdep class keys. If too many lockdep class keys are registered, lockdep stops to work. So, using a dynamic(separated) lockdep class key should be considered carefully. In addition, updating lockdep class key routine might have to be existing. (lockdep_register_key(), lockdep_set_class(), lockdep_unregister_key()) 3. Using lockdep subclass. A lockdep class key could have 8 subclasses. The different subclass is considered different locks by lockdep infrastructure. But "lock-classes" is not counted by subclasses. So, it could avoid stopping lockdep infrastructure by an overflow of lockdep class keys. This approach should also have an updating lockdep class key routine. (lockdep_set_subclass()) 4. Using nonvalidate lockdep class key. The lockdep infrastructure supports nonvalidate lockdep class key type. It means this lockdep is not validated by lockdep infrastructure. So, the splat will not happen but lockdep couldn't detect real deadlock case because lockdep really doesn't validate it. I think this should be used for really special cases. (lockdep_set_novalidate_class()) Further discussion here: https://patchwork.ozlabs.org/project/netdev/patch/20200503052220.4536-2-xiyou.wangcong@gmail.com/ There appears to be no negative side-effect to declaring lockless TX for the DSA virtual interfaces, which means they handle their own locking. So that's what we do to make the splat go away. Patch tested in a wide variety of cases: unicast, multicast, PTP, etc. Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Suggested-by: Taehee Yoo Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- net/dsa/slave.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 62f4ee3da172..d3bcb9afa795 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -1736,6 +1736,7 @@ int dsa_slave_create(struct dsa_port *port) if (ds->ops->port_vlan_add && ds->ops->port_vlan_del) slave_dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; slave_dev->hw_features |= NETIF_F_HW_TC; + slave_dev->features |= NETIF_F_LLTX; slave_dev->ethtool_ops = &dsa_slave_ethtool_ops; if (!IS_ERR_OR_NULL(port->mac)) ether_addr_copy(slave_dev->dev_addr, port->mac); -- cgit v1.2.3-58-ga151 From f7d5991b92ff824798693ddf231cf814c9d5a88b Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Sat, 23 May 2020 11:53:41 +0000 Subject: drm/amd/display: drop cursor position check in atomic test get_cursor_position already handles the case where the cursor has negative off-screen coordinates by not setting dc_cursor_position.enabled. Signed-off-by: Simon Ser Fixes: 626bf90fe03f ("drm/amd/display: add basic atomic check for cursor plane") Cc: Alex Deucher Cc: Nicholas Kazlauskas Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 28e651b173ab..7fc15b82fe48 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -7880,13 +7880,6 @@ static int dm_update_plane_state(struct dc *dc, return -EINVAL; } - if (new_plane_state->crtc_x <= -new_acrtc->max_cursor_width || - new_plane_state->crtc_y <= -new_acrtc->max_cursor_height) { - DRM_DEBUG_ATOMIC("Bad cursor position %d, %d\n", - new_plane_state->crtc_x, new_plane_state->crtc_y); - return -EINVAL; - } - return 0; } -- cgit v1.2.3-58-ga151 From 4e5183200d9b66695c754ef214933402056e7b95 Mon Sep 17 00:00:00 2001 From: Aric Cyr Date: Tue, 12 May 2020 11:48:48 -0400 Subject: drm/amd/display: Fix potential integer wraparound resulting in a hang [Why] If VUPDATE_END is before VUPDATE_START the delay calculated can become very large, causing a soft hang. [How] Take the absolute value of the difference between START and END. Signed-off-by: Aric Cyr Reviewed-by: Nicholas Kazlauskas Acked-by: Qingqing Zhuo Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 82fc3d5b3b2a..416afb99529d 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -1684,6 +1684,8 @@ static void delay_cursor_until_vupdate(struct dc *dc, struct pipe_ctx *pipe_ctx) return; /* Stall out until the cursor update completes. */ + if (vupdate_end < vupdate_start) + vupdate_end += stream->timing.v_total; us_vupdate = (vupdate_end - vupdate_start + 1) * us_per_line; udelay(us_to_vupdate + us_vupdate); } -- cgit v1.2.3-58-ga151 From 1acba6a817852d4aa7916d5c4f2c82f702ee9224 Mon Sep 17 00:00:00 2001 From: Valentine Fatiev Date: Wed, 27 May 2020 16:47:05 +0300 Subject: IB/ipoib: Fix double free of skb in case of multicast traffic in CM mode When connected mode is set, and we have connected and datagram traffic in parallel, ipoib might crash with double free of datagram skb. The current mechanism assumes that the order in the completion queue is the same as the order of sent packets for all QPs. Order is kept only for specific QP, in case of mixed UD and CM traffic we have few QPs (one UD and few CM's) in parallel. The problem: ---------------------------------------------------------- Transmit queue: ----------------- UD skb pointer kept in queue itself, CM skb kept in spearate queue and uses transmit queue as a placeholder to count the number of total transmitted packets. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL ud1 UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ tail head Completion queue (problematic scenario) - the order not the same as in the transmit queue: 1 2 3 4 5 6 7 8 9 ------------------------------------ ud1 CM1 UD2 ud3 cm2 cm3 ud4 cm4 ud5 ------------------------------------ 1. CM1 'wc' processing - skb freed in cm separate ring. - tx_tail of transmit queue increased although UD2 is not freed. Now driver assumes UD2 index is already freed and it could be used for new transmitted skb. 0 1 2 3 4 5 6 7 8 9 10 11 12 13 .........127 ------------------------------------------------------------ NL NL UD2 CM1 ud3 cm2 cm3 ud4 cm4 ud5 NL NL NL ........... ------------------------------------------------------------ ^ ^ ^ (Bad)tail head (Bad - Could be used for new SKB) In this case (due to heavy load) UD2 skb pointer could be replaced by new transmitted packet UD_NEW, as the driver assumes its free. At this point we will have to process two 'wc' with same index but we have only one pointer to free. During second attempt to free the same skb we will have NULL pointer exception. 2. UD2 'wc' processing - skb freed according the index we got from 'wc', but it was already overwritten by mistake. So actually the skb that was released is the skb of the new transmitted packet and not the original one. 3. UD_NEW 'wc' processing - attempt to free already freed skb. NUll pointer exception. The fix: ----------------------------------------------------------------------- The fix is to stop using the UD ring as a placeholder for CM packets, the cyclic ring variables tx_head and tx_tail will manage the UD tx_ring, a new cyclic variables global_tx_head and global_tx_tail are introduced for managing and counting the overall outstanding sent packets, then the send queue will be stopped and waken based on these variables only. Note that no locking is needed since global_tx_head is updated in the xmit flow and global_tx_tail is updated in the NAPI flow only. A previous attempt tried to use one variable to count the outstanding sent packets, but it did not work since xmit and NAPI flows can run at the same time and the counter will be updated wrongly. Thus, we use the same simple cyclic head and tail scheme that we have today for the UD tx_ring. Fixes: 2c104ea68350 ("IB/ipoib: Get rid of the tx_outstanding variable in all modes") Link: https://lore.kernel.org/r/20200527134705.480068-1-leon@kernel.org Signed-off-by: Valentine Fatiev Signed-off-by: Alaa Hleihel Signed-off-by: Leon Romanovsky Acked-by: Doug Ledford Signed-off-by: Jason Gunthorpe --- drivers/infiniband/ulp/ipoib/ipoib.h | 4 ++++ drivers/infiniband/ulp/ipoib/ipoib_cm.c | 15 +++++++++------ drivers/infiniband/ulp/ipoib/ipoib_ib.c | 9 +++++++-- drivers/infiniband/ulp/ipoib/ipoib_main.c | 10 ++++++---- 4 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index e188a95984b5..9a3379c49541 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -377,8 +377,12 @@ struct ipoib_dev_priv { struct ipoib_rx_buf *rx_ring; struct ipoib_tx_buf *tx_ring; + /* cyclic ring variables for managing tx_ring, for UD only */ unsigned int tx_head; unsigned int tx_tail; + /* cyclic ring variables for counting overall outstanding send WRs */ + unsigned int global_tx_head; + unsigned int global_tx_tail; struct ib_sge tx_sge[MAX_SKB_FRAGS + 1]; struct ib_ud_wr tx_wr; struct ib_wc send_wc[MAX_SEND_CQE]; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index c59e00a0881f..9bf0fa30df28 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -756,7 +756,8 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_ return; } - if ((priv->tx_head - priv->tx_tail) == ipoib_sendq_size - 1) { + if ((priv->global_tx_head - priv->global_tx_tail) == + ipoib_sendq_size - 1) { ipoib_dbg(priv, "TX ring 0x%x full, stopping kernel net queue\n", tx->qp->qp_num); netif_stop_queue(dev); @@ -786,7 +787,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_ } else { netif_trans_update(dev); ++tx->tx_head; - ++priv->tx_head; + ++priv->global_tx_head; } } @@ -820,10 +821,11 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) netif_tx_lock(dev); ++tx->tx_tail; - ++priv->tx_tail; + ++priv->global_tx_tail; if (unlikely(netif_queue_stopped(dev) && - (priv->tx_head - priv->tx_tail) <= ipoib_sendq_size >> 1 && + ((priv->global_tx_head - priv->global_tx_tail) <= + ipoib_sendq_size >> 1) && test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))) netif_wake_queue(dev); @@ -1232,8 +1234,9 @@ timeout: dev_kfree_skb_any(tx_req->skb); netif_tx_lock_bh(p->dev); ++p->tx_tail; - ++priv->tx_tail; - if (unlikely(priv->tx_head - priv->tx_tail == ipoib_sendq_size >> 1) && + ++priv->global_tx_tail; + if (unlikely((priv->global_tx_head - priv->global_tx_tail) <= + ipoib_sendq_size >> 1) && netif_queue_stopped(p->dev) && test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) netif_wake_queue(p->dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index c332b4761816..da3c5315bbb5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -407,9 +407,11 @@ static void ipoib_ib_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) dev_kfree_skb_any(tx_req->skb); ++priv->tx_tail; + ++priv->global_tx_tail; if (unlikely(netif_queue_stopped(dev) && - ((priv->tx_head - priv->tx_tail) <= ipoib_sendq_size >> 1) && + ((priv->global_tx_head - priv->global_tx_tail) <= + ipoib_sendq_size >> 1) && test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))) netif_wake_queue(dev); @@ -634,7 +636,8 @@ int ipoib_send(struct net_device *dev, struct sk_buff *skb, else priv->tx_wr.wr.send_flags &= ~IB_SEND_IP_CSUM; /* increase the tx_head after send success, but use it for queue state */ - if (priv->tx_head - priv->tx_tail == ipoib_sendq_size - 1) { + if ((priv->global_tx_head - priv->global_tx_tail) == + ipoib_sendq_size - 1) { ipoib_dbg(priv, "TX ring full, stopping kernel net queue\n"); netif_stop_queue(dev); } @@ -662,6 +665,7 @@ int ipoib_send(struct net_device *dev, struct sk_buff *skb, rc = priv->tx_head; ++priv->tx_head; + ++priv->global_tx_head; } return rc; } @@ -807,6 +811,7 @@ int ipoib_ib_dev_stop_default(struct net_device *dev) ipoib_dma_unmap_tx(priv, tx_req); dev_kfree_skb_any(tx_req->skb); ++priv->tx_tail; + ++priv->global_tx_tail; } for (i = 0; i < ipoib_recvq_size; ++i) { diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 81b8227214f1..ceec24d45185 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1184,9 +1184,11 @@ static void ipoib_timeout(struct net_device *dev, unsigned int txqueue) ipoib_warn(priv, "transmit timeout: latency %d msecs\n", jiffies_to_msecs(jiffies - dev_trans_start(dev))); - ipoib_warn(priv, "queue stopped %d, tx_head %u, tx_tail %u\n", - netif_queue_stopped(dev), - priv->tx_head, priv->tx_tail); + ipoib_warn(priv, + "queue stopped %d, tx_head %u, tx_tail %u, global_tx_head %u, global_tx_tail %u\n", + netif_queue_stopped(dev), priv->tx_head, priv->tx_tail, + priv->global_tx_head, priv->global_tx_tail); + /* XXX reset QP, etc. */ } @@ -1701,7 +1703,7 @@ static int ipoib_dev_init_default(struct net_device *dev) goto out_rx_ring_cleanup; } - /* priv->tx_head, tx_tail & tx_outstanding are already 0 */ + /* priv->tx_head, tx_tail and global_tx_tail/head are already 0 */ if (ipoib_transport_dev_init(dev, priv->ca)) { pr_warn("%s: ipoib_transport_dev_init failed\n", -- cgit v1.2.3-58-ga151 From 900897591b2bf01154db8f59f6ecf8d60e60f15e Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Sun, 24 May 2020 08:03:07 +0000 Subject: csky: Fixup CONFIG_PREEMPT panic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit log: [    0.13373200] Calibrating delay loop... [    0.14077600] ------------[ cut here ]------------ [    0.14116700] WARNING: CPU: 0 PID: 0 at kernel/sched/core.c:3790 preempt_count_add+0xc8/0x11c [    0.14348000] DEBUG_LOCKS_WARN_ON((preempt_count() < 0))Modules linked in: [    0.14395100] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0 #7 [    0.14410800] [    0.14427400] Call Trace: [    0.14450700] [<807cd226>] dump_stack+0x8a/0xe4 [    0.14473500] [<80072792>] __warn+0x10e/0x15c [    0.14495900] [<80072852>] warn_slowpath_fmt+0x72/0xc0 [    0.14518600] [<800a5240>] preempt_count_add+0xc8/0x11c [    0.14544900] [<807ef918>] _raw_spin_lock+0x28/0x68 [    0.14572600] [<800e0eb8>] vprintk_emit+0x84/0x2d8 [    0.14599000] [<800e113a>] vprintk_default+0x2e/0x44 [    0.14625100] [<800e2042>] vprintk_func+0x12a/0x1d0 [    0.14651300] [<800e1804>] printk+0x30/0x48 [    0.14677600] [<80008052>] lockdep_init+0x12/0xb0 [    0.14703800] [<80002080>] start_kernel+0x558/0x7f8 [    0.14730000] [<800052bc>] csky_start+0x58/0x94 [    0.14756600] irq event stamp: 34 [    0.14775100] hardirqs last  enabled at (33): [<80067370>] ret_from_exception+0x2c/0x72 [    0.14793700] hardirqs last disabled at (34): [<800e0eae>] vprintk_emit+0x7a/0x2d8 [    0.14812300] softirqs last  enabled at (32): [<800655b0>] __do_softirq+0x578/0x6d8 [    0.14830800] softirqs last disabled at (25): [<8007b3b8>] irq_exit+0xec/0x128 The preempt_count of reg could be destroyed after csky_do_IRQ without reload from memory. After reference to other architectures (arm64, riscv), we move preempt entry into ret_from_exception and disable irq at the beginning of ret_from_exception instead of RESTORE_ALL. Signed-off-by: Guo Ren Reported-by: Lu Baoquan --- arch/csky/abiv1/inc/abi/entry.h | 1 - arch/csky/abiv2/inc/abi/entry.h | 1 - arch/csky/kernel/entry.S | 36 +++++++++++------------------------- 3 files changed, 11 insertions(+), 27 deletions(-) diff --git a/arch/csky/abiv1/inc/abi/entry.h b/arch/csky/abiv1/inc/abi/entry.h index 61d94ec7dd16..b3559db0c8a8 100644 --- a/arch/csky/abiv1/inc/abi/entry.h +++ b/arch/csky/abiv1/inc/abi/entry.h @@ -80,7 +80,6 @@ .endm .macro RESTORE_ALL - psrclr ie ldw lr, (sp, 4) ldw a0, (sp, 8) mtcr a0, epc diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h index ab63c41abcca..698df2f294be 100644 --- a/arch/csky/abiv2/inc/abi/entry.h +++ b/arch/csky/abiv2/inc/abi/entry.h @@ -63,7 +63,6 @@ .endm .macro RESTORE_ALL - psrclr ie ldw tls, (sp, 0) ldw lr, (sp, 4) ldw a0, (sp, 8) diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S index 3760397fdd3d..bfbef30f8a53 100644 --- a/arch/csky/kernel/entry.S +++ b/arch/csky/kernel/entry.S @@ -208,9 +208,9 @@ ENTRY(ret_from_fork) jbsr syscall_trace_exit ret_from_exception: + psrclr ie ld syscallid, (sp, LSAVE_PSR) btsti syscallid, 31 - bt 1f /* * Load address of current->thread_info, Then get address of task_struct @@ -220,11 +220,20 @@ ret_from_exception: bmaski r10, THREAD_SHIFT andn r9, r10 + bt 1f ldw r12, (r9, TINFO_FLAGS) andi r12, (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | _TIF_UPROBE) cmpnei r12, 0 bt exit_work 1: +#ifdef CONFIG_PREEMPTION + ldw r12, (r9, TINFO_PREEMPT) + cmpnei r12, 0 + bt 2f + jbsr preempt_schedule_irq /* irq en/disable is done inside */ +2: +#endif + #ifdef CONFIG_TRACE_IRQFLAGS ld r10, (sp, LSAVE_PSR) btsti r10, 6 @@ -241,6 +250,7 @@ exit_work: btsti r12, TIF_NEED_RESCHED bt work_resched + psrset ie mov a0, sp mov a1, r12 jmpi do_notify_resume @@ -291,34 +301,10 @@ ENTRY(csky_irq) jbsr trace_hardirqs_off #endif -#ifdef CONFIG_PREEMPTION - mov r9, sp /* Get current stack pointer */ - bmaski r10, THREAD_SHIFT - andn r9, r10 /* Get thread_info */ - - /* - * Get task_struct->stack.preempt_count for current, - * and increase 1. - */ - ldw r12, (r9, TINFO_PREEMPT) - addi r12, 1 - stw r12, (r9, TINFO_PREEMPT) -#endif mov a0, sp jbsr csky_do_IRQ -#ifdef CONFIG_PREEMPTION - subi r12, 1 - stw r12, (r9, TINFO_PREEMPT) - cmpnei r12, 0 - bt 2f - ldw r12, (r9, TINFO_FLAGS) - btsti r12, TIF_NEED_RESCHED - bf 2f - jbsr preempt_schedule_irq /* irq en/disable is done inside */ -#endif -2: jmpi ret_from_exception /* -- cgit v1.2.3-58-ga151 From e0bbb53843b5fdfe464b099217e3b9d97e8a75d7 Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Sun, 24 May 2020 10:44:38 +0000 Subject: csky: Fixup abiv2 syscall_trace break a4 & a5 Current implementation could destory a4 & a5 when strace, so we need to get them from pt_regs by SAVE_ALL. Signed-off-by: Guo Ren --- arch/csky/abiv2/inc/abi/entry.h | 2 ++ arch/csky/kernel/entry.S | 6 ++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h index 698df2f294be..6ee71bfc512a 100644 --- a/arch/csky/abiv2/inc/abi/entry.h +++ b/arch/csky/abiv2/inc/abi/entry.h @@ -13,6 +13,8 @@ #define LSAVE_A1 28 #define LSAVE_A2 32 #define LSAVE_A3 36 +#define LSAVE_A4 40 +#define LSAVE_A5 44 #define KSPTOUSP #define USPTOKSP diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S index bfbef30f8a53..76dc7299681b 100644 --- a/arch/csky/kernel/entry.S +++ b/arch/csky/kernel/entry.S @@ -173,8 +173,10 @@ csky_syscall_trace: ldw a3, (sp, LSAVE_A3) #if defined(__CSKYABIV2__) subi sp, 8 - stw r5, (sp, 0x4) - stw r4, (sp, 0x0) + ldw r9, (sp, LSAVE_A4) + stw r9, (sp, 0x0) + ldw r9, (sp, LSAVE_A5) + stw r9, (sp, 0x4) #else ldw r6, (sp, LSAVE_A4) ldw r7, (sp, LSAVE_A5) -- cgit v1.2.3-58-ga151 From 20f69538b9ab7175e1474a73e2793b8278846e1e Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Sun, 24 May 2020 12:14:11 +0000 Subject: csky: Coding convention in entry.S There is no fixup or feature in the patch, we only cleanup with: - Remove unnecessary reg used (r11, r12), just use r9 & r10 & syscallid regs as temp useage. - Add _TIF_SYSCALL_WORK and _TIF_WORK_MASK to gather macros. Signed-off-by: Guo Ren --- arch/csky/abiv1/inc/abi/entry.h | 5 --- arch/csky/abiv2/inc/abi/entry.h | 5 --- arch/csky/include/asm/thread_info.h | 6 ++++ arch/csky/kernel/entry.S | 66 ++++++++++++++++++++----------------- 4 files changed, 42 insertions(+), 40 deletions(-) diff --git a/arch/csky/abiv1/inc/abi/entry.h b/arch/csky/abiv1/inc/abi/entry.h index b3559db0c8a8..13c23e2c707c 100644 --- a/arch/csky/abiv1/inc/abi/entry.h +++ b/arch/csky/abiv1/inc/abi/entry.h @@ -174,9 +174,4 @@ movi r6, 0 cpwcr r6, cpcr31 .endm - -.macro ANDI_R3 rx, imm - lsri \rx, 3 - andi \rx, (\imm >> 3) -.endm #endif /* __ASM_CSKY_ENTRY_H */ diff --git a/arch/csky/abiv2/inc/abi/entry.h b/arch/csky/abiv2/inc/abi/entry.h index 6ee71bfc512a..4fdd6c12e7ff 100644 --- a/arch/csky/abiv2/inc/abi/entry.h +++ b/arch/csky/abiv2/inc/abi/entry.h @@ -302,9 +302,4 @@ jmpi 3f /* jump to va */ 3: .endm - -.macro ANDI_R3 rx, imm - lsri \rx, 3 - andi \rx, (\imm >> 3) -.endm #endif /* __ASM_CSKY_ENTRY_H */ diff --git a/arch/csky/include/asm/thread_info.h b/arch/csky/include/asm/thread_info.h index 5c61e84e790f..8980e4e64391 100644 --- a/arch/csky/include/asm/thread_info.h +++ b/arch/csky/include/asm/thread_info.h @@ -81,4 +81,10 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \ + _TIF_NOTIFY_RESUME | _TIF_UPROBE) + +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SYSCALL_TRACEPOINT) + #endif /* _ASM_CSKY_THREAD_INFO_H */ diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S index 76dc7299681b..9595e86ce304 100644 --- a/arch/csky/kernel/entry.S +++ b/arch/csky/kernel/entry.S @@ -134,31 +134,32 @@ ENTRY(csky_systemcall) #endif psrset ee, ie - lrw r11, __NR_syscalls - cmphs syscallid, r11 /* Check nr of syscall */ + lrw r9, __NR_syscalls + cmphs syscallid, r9 /* Check nr of syscall */ bt ret_from_exception - lrw r13, sys_call_table - ixw r13, syscallid - ldw r11, (r13) - cmpnei r11, 0 + lrw r9, sys_call_table + ixw r9, syscallid + ldw syscallid, (r9) + cmpnei syscallid, 0 bf ret_from_exception mov r9, sp bmaski r10, THREAD_SHIFT andn r9, r10 - ldw r12, (r9, TINFO_FLAGS) - ANDI_R3 r12, (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT) - cmpnei r12, 0 + ldw r10, (r9, TINFO_FLAGS) + lrw r9, _TIF_SYSCALL_WORK + and r10, r9 + cmpnei r10, 0 bt csky_syscall_trace #if defined(__CSKYABIV2__) subi sp, 8 stw r5, (sp, 0x4) stw r4, (sp, 0x0) - jsr r11 /* Do system call */ + jsr syscallid /* Do system call */ addi sp, 8 #else - jsr r11 + jsr syscallid #endif stw a0, (sp, LSAVE_A0) /* Save return value */ jmpi ret_from_exception @@ -177,13 +178,12 @@ csky_syscall_trace: stw r9, (sp, 0x0) ldw r9, (sp, LSAVE_A5) stw r9, (sp, 0x4) + jsr syscallid /* Do system call */ + addi sp, 8 #else ldw r6, (sp, LSAVE_A4) ldw r7, (sp, LSAVE_A5) -#endif - jsr r11 /* Do system call */ -#if defined(__CSKYABIV2__) - addi sp, 8 + jsr syscallid /* Do system call */ #endif stw a0, (sp, LSAVE_A0) /* Save return value */ @@ -202,18 +202,20 @@ ENTRY(ret_from_fork) mov r9, sp bmaski r10, THREAD_SHIFT andn r9, r10 - ldw r12, (r9, TINFO_FLAGS) - ANDI_R3 r12, (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_AUDIT) - cmpnei r12, 0 + ldw r10, (r9, TINFO_FLAGS) + lrw r9, _TIF_SYSCALL_WORK + and r10, r9 + cmpnei r10, 0 bf ret_from_exception mov a0, sp /* sp = pt_regs pointer */ jbsr syscall_trace_exit ret_from_exception: psrclr ie - ld syscallid, (sp, LSAVE_PSR) - btsti syscallid, 31 + ld r9, (sp, LSAVE_PSR) + btsti r9, 31 + bt 1f /* * Load address of current->thread_info, Then get address of task_struct * Get task_needreshed in task_struct @@ -222,15 +224,19 @@ ret_from_exception: bmaski r10, THREAD_SHIFT andn r9, r10 - bt 1f - ldw r12, (r9, TINFO_FLAGS) - andi r12, (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | _TIF_UPROBE) - cmpnei r12, 0 + ldw r10, (r9, TINFO_FLAGS) + lrw r9, _TIF_WORK_MASK + and r10, r9 + cmpnei r10, 0 bt exit_work 1: #ifdef CONFIG_PREEMPTION - ldw r12, (r9, TINFO_PREEMPT) - cmpnei r12, 0 + mov r9, sp + bmaski r10, THREAD_SHIFT + andn r9, r10 + + ldw r10, (r9, TINFO_PREEMPT) + cmpnei r10, 0 bt 2f jbsr preempt_schedule_irq /* irq en/disable is done inside */ 2: @@ -246,15 +252,15 @@ ret_from_exception: RESTORE_ALL exit_work: - lrw syscallid, ret_from_exception - mov lr, syscallid + lrw r9, ret_from_exception + mov lr, r9 - btsti r12, TIF_NEED_RESCHED + btsti r10, TIF_NEED_RESCHED bt work_resched psrset ie mov a0, sp - mov a1, r12 + mov a1, r10 jmpi do_notify_resume work_resched: -- cgit v1.2.3-58-ga151 From f36e0aab6f1f78d770ce859df3f07a9c5763ce5f Mon Sep 17 00:00:00 2001 From: Guo Ren Date: Tue, 26 May 2020 06:34:50 +0000 Subject: csky: Fixup CONFIG_DEBUG_RSEQ Put the rseq_syscall check point at the prologue of the syscall will break the a0 ... a7. This will casue system call bug when DEBUG_RSEQ is enabled. So move it to the epilogue of syscall, but before syscall_trace. Signed-off-by: Guo Ren --- arch/csky/kernel/entry.S | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/csky/kernel/entry.S b/arch/csky/kernel/entry.S index 9595e86ce304..f13800383a19 100644 --- a/arch/csky/kernel/entry.S +++ b/arch/csky/kernel/entry.S @@ -128,15 +128,11 @@ tlbop_end 1 ENTRY(csky_systemcall) SAVE_ALL TRAP0_SIZE zero_fp -#ifdef CONFIG_RSEQ_DEBUG - mov a0, sp - jbsr rseq_syscall -#endif psrset ee, ie lrw r9, __NR_syscalls cmphs syscallid, r9 /* Check nr of syscall */ - bt ret_from_exception + bt 1f lrw r9, sys_call_table ixw r9, syscallid @@ -162,6 +158,11 @@ ENTRY(csky_systemcall) jsr syscallid #endif stw a0, (sp, LSAVE_A0) /* Save return value */ +1: +#ifdef CONFIG_DEBUG_RSEQ + mov a0, sp + jbsr rseq_syscall +#endif jmpi ret_from_exception csky_syscall_trace: @@ -187,6 +188,10 @@ csky_syscall_trace: #endif stw a0, (sp, LSAVE_A0) /* Save return value */ +#ifdef CONFIG_DEBUG_RSEQ + mov a0, sp + jbsr rseq_syscall +#endif mov a0, sp /* right now, sp --> pt_regs */ jbsr syscall_trace_exit br ret_from_exception -- cgit v1.2.3-58-ga151 From ba051f097fc30b00f6b66044386901141351a557 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 28 May 2020 08:34:57 +0900 Subject: arm64/kernel: Fix return value when cpu_online() fails in __cpu_up() If boot_secondary() was successful, and cpu_online() was an error in __cpu_up(), -EIO was returned, but 0 is returned by commit d22b115cbfbb7 ("arm64/kernel: Simplify __cpu_up() by bailing out early"). Therefore, bringup_wait_for_ap() causes the primary core to wait for a long time, which may cause boot failure. This commit sets -EIO to return code under the same conditions. Fixes: d22b115cbfbb ("arm64/kernel: Simplify __cpu_up() by bailing out early") Signed-off-by: Nobuhiro Iwamatsu Tested-by: Yuji Ishikawa Acked-by: Will Deacon Cc: Gavin Shan Cc: Mark Rutland Link: https://lore.kernel.org/r/20200527233457.2531118-1-nobuhiro1.iwamatsu@toshiba.co.jp [catalin.marinas@arm.com: return -EIO at the end of the function] Signed-off-by: Catalin Marinas --- arch/arm64/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index 061f60fe452f..bb813d06114a 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -176,7 +176,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) panic("CPU%u detected unsupported configuration\n", cpu); } - return ret; + return -EIO; } static void init_gic_priority_masking(void) -- cgit v1.2.3-58-ga151 From d195b1d1d1196681ac4775e0361e9cca70f740c2 Mon Sep 17 00:00:00 2001 From: Petr Mladek Date: Wed, 27 May 2020 14:28:44 +0200 Subject: powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again The commit 0ebeea8ca8a4d1d453a ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") caused that bpf_probe_read{, str}() functions were not longer available on architectures where the same logical address might have different content in kernel and user memory mapping. These architectures should use probe_read_{user,kernel}_str helpers. For backward compatibility, the problematic functions are still available on architectures where the user and kernel address spaces are not overlapping. This is defined CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. At the moment, these backward compatible functions are enabled only on x86_64, arm, and arm64. Let's do it also on powerpc that has the non overlapping address space as well. Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by: Petr Mladek Signed-off-by: Daniel Borkmann Acked-by: Michael Ellerman Link: https://lore.kernel.org/lkml/20200527122844.19524-1-pmladek@suse.com --- arch/powerpc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 924c541a9260..cb042a4ff19a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -126,6 +126,7 @@ config PPC select ARCH_HAS_MMIOWB if PPC64 select ARCH_HAS_PHYS_TO_DMA select ARCH_HAS_PMEM_API + select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE select ARCH_HAS_PTE_DEVMAP if PPC_BOOK3S_64 select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_MEMBARRIER_CALLBACKS -- cgit v1.2.3-58-ga151 From a068aab42258e25094bc2c159948d263ed7d7a77 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Wed, 27 May 2020 22:10:29 -0500 Subject: bonding: Fix reference count leak in bond_sysfs_slave_add. kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Previous commit "b8eb718348b8" fixed a similar problem. Fixes: 07699f9a7c8d ("bonding: add sysfs /slave dir for bond slave devices.") Signed-off-by: Qiushi Wu Acked-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_sysfs_slave.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_sysfs_slave.c b/drivers/net/bonding/bond_sysfs_slave.c index 007481557191..9b8346638f69 100644 --- a/drivers/net/bonding/bond_sysfs_slave.c +++ b/drivers/net/bonding/bond_sysfs_slave.c @@ -149,8 +149,10 @@ int bond_sysfs_slave_add(struct slave *slave) err = kobject_init_and_add(&slave->kobj, &slave_ktype, &(slave->dev->dev.kobj), "bonding_slave"); - if (err) + if (err) { + kobject_put(&slave->kobj); return err; + } for (a = slave_attrs; *a; ++a) { err = sysfs_create_file(&slave->kobj, &((*a)->attr)); -- cgit v1.2.3-58-ga151 From 88743470668ef5eb6b7ba9e0f99888e5999bf172 Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Tue, 26 May 2020 19:57:49 +0200 Subject: x86/dma: Fix max PFN arithmetic overflow on 32 bit systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The patch does not change the later overall result of 0x100000 for MAX_DMA32_PFN (after it has been shifted by PAGE_SHIFT). The new calculation yields the same result, but does not require 64 bit arithmetic. On 32 bit systems the old calculation suffers from an arithmetic overflow in that intermediate term in braces: 4UL aka unsigned long int is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does not fit in 4 bytes), the in braces result is truncated to zero, the following right shift does not alter that, so MAX_DMA32_PFN evaluates to 0 on 32 bit systems. That wrong value is a problem in a comparision against MAX_DMA32_PFN in the init code for swiotlb in pci_swiotlb_detect_4gb() to decide if swiotlb should be active. That comparison yields the opposite result, when compiling on 32 bit systems. This was not possible before 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too") when that MAX_DMA32_PFN was first made visible to x86_32 (and which landed in v3.0). In practice this wasn't a problem, unless CONFIG_SWIOTLB is active on x86-32. However if one has set CONFIG_IOMMU_INTEL, since c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page is used") there's a dependency on CONFIG_SWIOTLB, which was not necessarily active before. That landed in v5.4, where we noticed it in the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both 32 and 64 bit kernel configs there (I could not find out why, so let's just say historical reasons). The effect is at boot time 64 MiB (default size) were allocated for bounce buffers now, which is a noticeable amount of memory on small systems like pcengines ALIX 2D3 with 256 MiB memory, which are still frequently used as home routers. We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4 (LTS) in fli4l and got that kernel messages for example: Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018 … Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem) … PCI-DMA: Using software bounce buffering for IO (SWIOTLB) software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB) The initial analysis and the suggested fix was done by user 'sourcejedi' at stackoverflow and explicitly marked as GPLv2 for inclusion in the Linux kernel: https://unix.stackexchange.com/a/520525/50007 The new calculation, which does not suffer from that overflow, is the same as for arch/mips now as suggested by Robin Murphy. The fix was tested by fli4l users on round about two dozen different systems, including both 32 and 64 bit archs, bare metal and virtualized machines. [ bp: Massage commit message. ] Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too") Reported-by: Alan Jenkins Suggested-by: Robin Murphy Signed-off-by: Alexander Dahl Signed-off-by: Borislav Petkov Reviewed-by: Greg Kroah-Hartman Cc: stable@vger.kernel.org Link: https://unix.stackexchange.com/q/520065/50007 Link: https://web.nettworks.org/bugs/browse/FFL-2560 Link: https://lkml.kernel.org/r/20200526175749.20742-1-post@lespocky.de --- arch/x86/include/asm/dma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/dma.h b/arch/x86/include/asm/dma.h index 00f7cf45e699..8e95aa4b0d17 100644 --- a/arch/x86/include/asm/dma.h +++ b/arch/x86/include/asm/dma.h @@ -74,7 +74,7 @@ #define MAX_DMA_PFN ((16UL * 1024 * 1024) >> PAGE_SHIFT) /* 4GB broken PCI/AGP hardware bus master zone */ -#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT) +#define MAX_DMA32_PFN (1UL << (32 - PAGE_SHIFT)) #ifdef CONFIG_X86_32 /* The maximum address that we can perform a DMA transfer to on this platform */ -- cgit v1.2.3-58-ga151 From af4798a5bba60af881626780cbc6457cb162bfd1 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Wed, 27 May 2020 22:20:40 -0700 Subject: mm/z3fold: silence kmemleak false positives of slots Kmemleak reported many leaks while under memory pressue in, slots = alloc_slots(pool, gfp); which is referenced by "zhdr" in init_z3fold_page(), zhdr->slots = slots; However, "zhdr" could be gone without freeing slots as the later will be freed separately when the last "handle" off of "handles" array is freed. It will be within "slots" which is always aligned. unreferenced object 0xc000000fdadc1040 (size 104): comm "oom04", pid 140476, jiffies 4295359280 (age 3454.970s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: z3fold_zpool_malloc+0x7b0/0xe10 alloc_slots at mm/z3fold.c:214 (inlined by) init_z3fold_page at mm/z3fold.c:412 (inlined by) z3fold_alloc at mm/z3fold.c:1161 (inlined by) z3fold_zpool_malloc at mm/z3fold.c:1735 zpool_malloc+0x34/0x50 zswap_frontswap_store+0x60c/0xda0 zswap_frontswap_store at mm/zswap.c:1093 __frontswap_store+0x128/0x330 swap_writepage+0x58/0x110 pageout+0x16c/0xa40 shrink_page_list+0x1ac8/0x25c0 shrink_inactive_list+0x270/0x730 shrink_lruvec+0x444/0xf30 shrink_node+0x2a4/0x9c0 do_try_to_free_pages+0x158/0x640 try_to_free_pages+0x1bc/0x5f0 __alloc_pages_slowpath.constprop.60+0x4dc/0x15a0 __alloc_pages_nodemask+0x520/0x650 alloc_pages_vma+0xc0/0x420 handle_mm_fault+0x1174/0x1bf0 Signed-off-by: Qian Cai Signed-off-by: Andrew Morton Acked-by: Vitaly Wool Acked-by: Catalin Marinas Link: http://lkml.kernel.org/r/20200522220052.2225-1-cai@lca.pw Signed-off-by: Linus Torvalds --- mm/z3fold.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/z3fold.c b/mm/z3fold.c index 8c3bb5e508b8..460b0feced26 100644 --- a/mm/z3fold.c +++ b/mm/z3fold.c @@ -43,6 +43,7 @@ #include #include #include +#include /* * NCHUNKS_ORDER determines the internal allocation granularity, effectively @@ -215,6 +216,8 @@ static inline struct z3fold_buddy_slots *alloc_slots(struct z3fold_pool *pool, (gfp & ~(__GFP_HIGHMEM | __GFP_MOVABLE))); if (slots) { + /* It will be freed separately in free_handle(). */ + kmemleak_not_leak(slots); memset(slots->slot, 0, sizeof(slots->slot)); slots->pool = (unsigned long)pool; rwlock_init(&slots->lock); -- cgit v1.2.3-58-ga151 From 2f33a706027c94cd4f70fcd3e3f4a17c1ce4ea4b Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 27 May 2020 22:20:43 -0700 Subject: mm,thp: stop leaking unreleased file pages When collapse_file() calls try_to_release_page(), it has already isolated the page: so if releasing buffers happens to fail (as it sometimes does), remember to putback_lru_page(): otherwise that page is left unreclaimable and unfreeable, and the file extent uncollapsible. Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Acked-by: Song Liu Acked-by: Kirill A. Shutemov Acked-by: Johannes Weiner Cc: Rik van Riel Cc: [5.4+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2005231837500.1766@eggly.anvils Signed-off-by: Linus Torvalds --- mm/khugepaged.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/khugepaged.c b/mm/khugepaged.c index 99d77ffb79c2..cd280afb246e 100644 --- a/mm/khugepaged.c +++ b/mm/khugepaged.c @@ -1692,6 +1692,7 @@ static void collapse_file(struct mm_struct *mm, if (page_has_private(page) && !try_to_release_page(page, GFP_KERNEL)) { result = SCAN_PAGE_HAS_PRIVATE; + putback_lru_page(page); goto out_unlock; } -- cgit v1.2.3-58-ga151 From 6988f31d558aa8c744464a7f6d91d34ada48ad12 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Wed, 27 May 2020 22:20:47 -0700 Subject: mm: remove VM_BUG_ON(PageSlab()) from page_mapcount() Replace superfluous VM_BUG_ON() with comment about correct usage. Technically reverts commit 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()"), but context lines have changed. Function isolate_migratepages_block() runs some checks out of lru_lock when choose pages for migration. After checking PageLRU() it checks extra page references by comparing page_count() and page_mapcount(). Between these two checks page could be removed from lru, freed and taken by slab. As a result this race triggers VM_BUG_ON(PageSlab()) in page_mapcount(). Race window is tiny. For certain workload this happens around once a year. page:ffffea0105ca9380 count:1 mapcount:0 mapping:ffff88ff7712c180 index:0x0 compound_mapcount: 0 flags: 0x500000000008100(slab|head) raw: 0500000000008100 dead000000000100 dead000000000200 ffff88ff7712c180 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(PageSlab(page)) ------------[ cut here ]------------ kernel BUG at ./include/linux/mm.h:628! invalid opcode: 0000 [#1] SMP NOPTI CPU: 77 PID: 504 Comm: kcompactd1 Tainted: G W 4.19.109-27 #1 Hardware name: Yandex T175-N41-Y3N/MY81-EX0-Y3N, BIOS R05 06/20/2019 RIP: 0010:isolate_migratepages_block+0x986/0x9b0 The code in isolate_migratepages_block() was added in commit 119d6d59dcc0 ("mm, compaction: avoid isolating pinned pages") before adding VM_BUG_ON into page_mapcount(). This race has been predicted in 2015 by Vlastimil Babka (see link below). [akpm@linux-foundation.org: comment tweaks, per Hugh] Fixes: 1d148e218a0d ("mm: add VM_BUG_ON_PAGE() to page_mapcount()") Signed-off-by: Konstantin Khlebnikov Signed-off-by: Andrew Morton Acked-by: Hugh Dickins Acked-by: Kirill A. Shutemov Acked-by: Vlastimil Babka Cc: David Rientjes Cc: Link: http://lkml.kernel.org/r/159032779896.957378.7852761411265662220.stgit@buzz Link: https://lore.kernel.org/lkml/557710E1.6060103@suse.cz/ Link: https://lore.kernel.org/linux-mm/158937872515.474360.5066096871639561424.stgit@buzz/T/ (v1) Signed-off-by: Linus Torvalds --- include/linux/mm.h | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 5a323422d783..f3fe7371855c 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -782,6 +782,11 @@ static inline void *kvcalloc(size_t n, size_t size, gfp_t flags) extern void kvfree(const void *addr); +/* + * Mapcount of compound page as a whole, does not include mapped sub-pages. + * + * Must be called only for compound pages or any their tail sub-pages. + */ static inline int compound_mapcount(struct page *page) { VM_BUG_ON_PAGE(!PageCompound(page), page); @@ -801,10 +806,16 @@ static inline void page_mapcount_reset(struct page *page) int __page_mapcount(struct page *page); +/* + * Mapcount of 0-order page; when compound sub-page, includes + * compound_mapcount(). + * + * Result is undefined for pages which cannot be mapped into userspace. + * For example SLAB or special types of pages. See function page_has_type(). + * They use this place in struct page differently. + */ static inline int page_mapcount(struct page *page) { - VM_BUG_ON_PAGE(PageSlab(page), page); - if (unlikely(PageCompound(page))) return __page_mapcount(page); return atomic_read(&page->_mapcount) + 1; -- cgit v1.2.3-58-ga151 From 1d605416fb7175e1adf094251466caa52093b413 Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Wed, 27 May 2020 22:20:52 -0700 Subject: fs/binfmt_elf.c: allocate initialized memory in fill_thread_core_info() KMSAN reported uninitialized data being written to disk when dumping core. As a result, several kilobytes of kmalloc memory may be written to the core file and then read by a non-privileged user. Reported-by: sam Signed-off-by: Alexander Potapenko Signed-off-by: Andrew Morton Acked-by: Kees Cook Cc: Al Viro Cc: Alexey Dobriyan Cc: Link: http://lkml.kernel.org/r/20200419100848.63472-1-glider@google.com Link: https://github.com/google/kmsan/issues/76 Signed-off-by: Linus Torvalds --- fs/binfmt_elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 13f25e241ac4..25d489bc9453 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1733,7 +1733,7 @@ static int fill_thread_core_info(struct elf_thread_core_info *t, (!regset->active || regset->active(t->task, regset) > 0)) { int ret; size_t size = regset_size(t->task, regset); - void *data = kmalloc(size, GFP_KERNEL); + void *data = kzalloc(size, GFP_KERNEL); if (unlikely(!data)) return 0; ret = regset->get(t->task, regset, -- cgit v1.2.3-58-ga151 From 4377748c7b5187c3342a60fa2ceb60c8a57a8488 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 27 May 2020 22:20:55 -0700 Subject: include/asm-generic/topology.h: guard cpumask_of_node() macro argument drivers/hwmon/amd_energy.c:195:15: error: invalid operands to binary expression ('void' and 'int') (channel - data->nr_cpus)); ~~~~~~~~~^~~~~~~~~~~~~~~~~ include/asm-generic/topology.h:51:42: note: expanded from macro 'cpumask_of_node' #define cpumask_of_node(node) ((void)node, cpu_online_mask) ^~~~ include/linux/cpumask.h:618:72: note: expanded from macro 'cpumask_first_and' #define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p)) ^~~~~ Fixes: f0b848ce6fe9 ("cpumask: Introduce cpumask_of_{node,pcibus} to replace {node,pcibus}_to_cpumask") Fixes: 8abee9566b7e ("hwmon: Add amd_energy driver to report energy counters") Signed-off-by: Arnd Bergmann Signed-off-by: Andrew Morton Acked-by: Guenter Roeck Link: http://lkml.kernel.org/r/20200527134623.930247-1-arnd@arndb.de Signed-off-by: Linus Torvalds --- include/asm-generic/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/topology.h b/include/asm-generic/topology.h index 238873739550..5aa8705df87e 100644 --- a/include/asm-generic/topology.h +++ b/include/asm-generic/topology.h @@ -48,7 +48,7 @@ #ifdef CONFIG_NEED_MULTIPLE_NODES #define cpumask_of_node(node) ((node) == 0 ? cpu_online_mask : cpu_none_mask) #else - #define cpumask_of_node(node) ((void)node, cpu_online_mask) + #define cpumask_of_node(node) ((void)(node), cpu_online_mask) #endif #endif #ifndef pcibus_to_node -- cgit v1.2.3-58-ga151 From b0beb28097fa04177b3769f4bb7a0d0d9c4ae76e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 28 May 2020 13:19:29 -0600 Subject: Revert "block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT" This reverts commit c58c1f83436b501d45d4050fd1296d71a9760bcb. io_uring does do the right thing for this case, and we're still returning -EAGAIN to userspace for the cases we don't support. Revert this change to avoid doing endless spins of resubmits. Cc: stable@vger.kernel.org # v5.6 Reported-by: Bijan Mottahedeh Signed-off-by: Jens Axboe --- block/blk-core.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 7e4a1da0715e..9bfaee050c82 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -891,14 +891,11 @@ generic_make_request_checks(struct bio *bio) } /* - * Non-mq queues do not honor REQ_NOWAIT, so complete a bio - * with BLK_STS_AGAIN status in order to catch -EAGAIN and - * to give a chance to the caller to repeat request gracefully. + * For a REQ_NOWAIT based request, return -EOPNOTSUPP + * if queue is not a request based queue. */ - if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q)) { - status = BLK_STS_AGAIN; - goto end_io; - } + if ((bio->bi_opf & REQ_NOWAIT) && !queue_is_mq(q)) + goto not_supported; if (should_fail_bio(bio)) goto end_io; -- cgit v1.2.3-58-ga151 From 4bfe6cce133cad82cea04490c308795275857782 Mon Sep 17 00:00:00 2001 From: Jay Lang Date: Sun, 24 May 2020 12:27:39 -0400 Subject: x86/ioperm: Prevent a memory leak when fork fails In the copy_process() routine called by _do_fork(), failure to allocate a PID (or further along in the function) will trigger an invocation to exit_thread(). This is done to clean up from an earlier call to copy_thread_tls(). Naturally, the child task is passed into exit_thread(), however during the process, io_bitmap_exit() nullifies the parent's io_bitmap rather than the child's. As copy_thread_tls() has been called ahead of the failure, the reference count on the calling thread's io_bitmap is incremented as we would expect. However, io_bitmap_exit() doesn't accept any arguments, and thus assumes it should trash the current thread's io_bitmap reference rather than the child's. This is pretty sneaky in practice, because in all instances but this one, exit_thread() is called with respect to the current task and everything works out. A determined attacker can issue an appropriate ioctl (i.e. KDENABIO) to get a bitmap allocated, and force a clone3() syscall to fail by passing in a zeroed clone_args structure. The kernel handles the erroneous struct and the buggy code path is followed, and even though the parent's reference to the io_bitmap is trashed, the child still holds a reference and thus the structure will never be freed. Fix this by tweaking io_bitmap_exit() and its subroutines to accept a task_struct argument which to operate on. Fixes: ea5f1cd7ab49 ("x86/ioperm: Remove bitmap if all permissions dropped") Signed-off-by: Jay Lang Signed-off-by: Thomas Gleixner Cc: stable#@vger.kernel.org Link: https://lkml.kernel.org/r/20200524162742.253727-1-jaytlang@mit.edu --- arch/x86/include/asm/io_bitmap.h | 4 ++-- arch/x86/kernel/ioport.c | 22 +++++++++++----------- arch/x86/kernel/process.c | 4 ++-- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/x86/include/asm/io_bitmap.h b/arch/x86/include/asm/io_bitmap.h index 07344d82e88e..ac1a99ffbd8d 100644 --- a/arch/x86/include/asm/io_bitmap.h +++ b/arch/x86/include/asm/io_bitmap.h @@ -17,7 +17,7 @@ struct task_struct; #ifdef CONFIG_X86_IOPL_IOPERM void io_bitmap_share(struct task_struct *tsk); -void io_bitmap_exit(void); +void io_bitmap_exit(struct task_struct *tsk); void native_tss_update_io_bitmap(void); @@ -29,7 +29,7 @@ void native_tss_update_io_bitmap(void); #else static inline void io_bitmap_share(struct task_struct *tsk) { } -static inline void io_bitmap_exit(void) { } +static inline void io_bitmap_exit(struct task_struct *tsk) { } static inline void tss_update_io_bitmap(void) { } #endif diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c index a53e7b4a7419..e2fab3ceb09f 100644 --- a/arch/x86/kernel/ioport.c +++ b/arch/x86/kernel/ioport.c @@ -33,15 +33,15 @@ void io_bitmap_share(struct task_struct *tsk) set_tsk_thread_flag(tsk, TIF_IO_BITMAP); } -static void task_update_io_bitmap(void) +static void task_update_io_bitmap(struct task_struct *tsk) { - struct thread_struct *t = ¤t->thread; + struct thread_struct *t = &tsk->thread; if (t->iopl_emul == 3 || t->io_bitmap) { /* TSS update is handled on exit to user space */ - set_thread_flag(TIF_IO_BITMAP); + set_tsk_thread_flag(tsk, TIF_IO_BITMAP); } else { - clear_thread_flag(TIF_IO_BITMAP); + clear_tsk_thread_flag(tsk, TIF_IO_BITMAP); /* Invalidate TSS */ preempt_disable(); tss_update_io_bitmap(); @@ -49,12 +49,12 @@ static void task_update_io_bitmap(void) } } -void io_bitmap_exit(void) +void io_bitmap_exit(struct task_struct *tsk) { - struct io_bitmap *iobm = current->thread.io_bitmap; + struct io_bitmap *iobm = tsk->thread.io_bitmap; - current->thread.io_bitmap = NULL; - task_update_io_bitmap(); + tsk->thread.io_bitmap = NULL; + task_update_io_bitmap(tsk); if (iobm && refcount_dec_and_test(&iobm->refcnt)) kfree(iobm); } @@ -102,7 +102,7 @@ long ksys_ioperm(unsigned long from, unsigned long num, int turn_on) if (!iobm) return -ENOMEM; refcount_set(&iobm->refcnt, 1); - io_bitmap_exit(); + io_bitmap_exit(current); } /* @@ -134,7 +134,7 @@ long ksys_ioperm(unsigned long from, unsigned long num, int turn_on) } /* All permissions dropped? */ if (max_long == UINT_MAX) { - io_bitmap_exit(); + io_bitmap_exit(current); return 0; } @@ -192,7 +192,7 @@ SYSCALL_DEFINE1(iopl, unsigned int, level) } t->iopl_emul = level; - task_update_io_bitmap(); + task_update_io_bitmap(current); return 0; } diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 9da70b279dad..35638f1c5791 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -96,7 +96,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) } /* - * Free current thread data structures etc.. + * Free thread data structures etc.. */ void exit_thread(struct task_struct *tsk) { @@ -104,7 +104,7 @@ void exit_thread(struct task_struct *tsk) struct fpu *fpu = &t->fpu; if (test_thread_flag(TIF_IO_BITMAP)) - io_bitmap_exit(); + io_bitmap_exit(tsk); free_vm86(t); -- cgit v1.2.3-58-ga151 From 45ebf73ebcec88a34a778f5feaa0b82b1c76069e Mon Sep 17 00:00:00 2001 From: Jonas Falkevik Date: Wed, 27 May 2020 11:56:40 +0200 Subject: sctp: check assoc before SCTP_ADDR_{MADE_PRIM, ADDED} event Make sure SCTP_ADDR_{MADE_PRIM,ADDED} are sent only for associations that have been established. These events are described in rfc6458#section-6.1 SCTP_PEER_ADDR_CHANGE: This tag indicates that an address that is part of an existing association has experienced a change of state (e.g., a failure or return to service of the reachability of an endpoint via a specific transport address). Signed-off-by: Jonas Falkevik Acked-by: Marcelo Ricardo Leitner Reviewed-by: Xin Long Signed-off-by: David S. Miller --- net/sctp/ulpevent.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index c82dbdcf13f2..77d5c36a8991 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -343,6 +343,9 @@ void sctp_ulpevent_nofity_peer_addr_change(struct sctp_transport *transport, struct sockaddr_storage addr; struct sctp_ulpevent *event; + if (asoc->state < SCTP_STATE_ESTABLISHED) + return; + memset(&addr, 0, sizeof(struct sockaddr_storage)); memcpy(&addr, &transport->ipaddr, transport->af_specific->sockaddr_len); -- cgit v1.2.3-58-ga151 From 7c6d2ecbda83150b2036a2b36b21381ad4667762 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 28 May 2020 14:57:47 -0700 Subject: net: be more gentle about silly gso requests coming from user Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests. When --mss=XXX option is set, packetdrill always provide gso_type & gso_size for its inbound packets, regardless of packet size. if (packet->tcp && packet->mss) { if (packet->ipv4) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; gso.gso_size = packet->mss; } Since many other programs could do the same, relax virtio_net_hdr_to_skb() to no longer return an error, but instead ignore gso settings. This keeps Willem intent to make sure no malicious packet could reach gso stack. Note that TCP stack has a special logic in tcp_set_skb_tso_segs() to clear gso_size for small packets. Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- include/linux/virtio_net.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 88997022a4b5..e8a924eeea3d 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -109,16 +109,17 @@ retry: if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); + struct skb_shared_info *shinfo = skb_shinfo(skb); - if (skb->len - p_off <= gso_size) - return -EINVAL; - - skb_shinfo(skb)->gso_size = gso_size; - skb_shinfo(skb)->gso_type = gso_type; + /* Too small packets are not really GSO ones. */ + if (skb->len - p_off > gso_size) { + shinfo->gso_size = gso_size; + shinfo->gso_type = gso_type; - /* Header must be checked, and gso_segs computed. */ - skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; - skb_shinfo(skb)->gso_segs = 0; + /* Header must be checked, and gso_segs computed. */ + shinfo->gso_type |= SKB_GSO_DODGY; + shinfo->gso_segs = 0; + } } return 0; -- cgit v1.2.3-58-ga151 From f6a23d85d078c2ffde79c66ca81d0a1dde451649 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 26 May 2020 17:41:46 +0800 Subject: xfrm: fix a NULL-ptr deref in xfrm_local_error This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f319f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d48746e4b ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol") Reported-by: Xiumei Mu Signed-off-by: Xin Long Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_output.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c index 69c33cab8f49..69c4900db817 100644 --- a/net/xfrm/xfrm_output.c +++ b/net/xfrm/xfrm_output.c @@ -642,7 +642,8 @@ void xfrm_local_error(struct sk_buff *skb, int mtu) if (skb->protocol == htons(ETH_P_IP)) proto = AF_INET; - else if (skb->protocol == htons(ETH_P_IPV6)) + else if (skb->protocol == htons(ETH_P_IPV6) && + skb->sk->sk_family == AF_INET6) proto = AF_INET6; else return; -- cgit v1.2.3-58-ga151 From 2f26ed1764b42a8c40d9c48441c73a70d805decf Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Fri, 29 May 2020 16:14:46 +1000 Subject: powerpc/64s: Disable sanitisers for C syscall/interrupt entry/exit code syzkaller is picking up a bunch of crashes that look like this: Unrecoverable exception 380 at c00000000037ed60 (msr=8000000000001031) Oops: Unrecoverable exception, sig: 6 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 874 Comm: syz-executor.0 Not tainted 5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e #0 NIP: c00000000037ed60 LR: c00000000004bac8 CTR: c000000000030990 REGS: c0000000555a7230 TRAP: 0380 Not tainted (5.7.0-rc7-syzkaller-00016-gb0c3ba31be3e) MSR: 8000000000001031 CR: 48222882 XER: 20000000 CFAR: c00000000004bac4 IRQMASK: 0 GPR00: c00000000004bb68 c0000000555a74c0 c0000000024b3500 0000000000000005 GPR04: 0000000000000000 0000000000000000 c00000000004bb88 c008000000910000 GPR08: 00000000000b0000 c00000000004bac8 0000000000016000 c000000002503500 GPR12: c000000000030990 c000000003190000 00000000106a5898 00000000106a0000 GPR16: 00000000106a5890 c000000007a92000 c000000008180e00 c000000007a8f700 GPR20: c000000007a904b0 0000000010110000 c00000000259d318 5deadbeef0000100 GPR24: 5deadbeef0000122 c000000078422700 c000000009ee88b8 c000000078422778 GPR28: 0000000000000001 800000000280b033 0000000000000000 c0000000555a75a0 NIP [c00000000037ed60] __sanitizer_cov_trace_pc+0x40/0x50 LR [c00000000004bac8] interrupt_exit_kernel_prepare+0x118/0x310 Call Trace: [c0000000555a74c0] [c00000000004bb68] interrupt_exit_kernel_prepare+0x1b8/0x310 (unreliable) [c0000000555a7530] [c00000000000f9a8] interrupt_return+0x118/0x1c0 --- interrupt: 900 at __sanitizer_cov_trace_pc+0x0/0x50 ...... This is caused by __sanitizer_cov_trace_pc() causing an SLB fault after MSR[RI] has been cleared by __hard_EE_RI_disable(), which we can not recover from. Do not instrument the new syscall/interrupt entry/exit code with KCOV, GCOV or UBSAN. Reported-by: syzbot-ppc64 Fixes: 68b34588e202 ("powerpc/64/sycall: Implement syscall entry/exit logic in C") Signed-off-by: Daniel Axtens Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1c4385852d3d..244542ae2a91 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -162,6 +162,9 @@ UBSAN_SANITIZE_kprobes.o := n GCOV_PROFILE_kprobes-ftrace.o := n KCOV_INSTRUMENT_kprobes-ftrace.o := n UBSAN_SANITIZE_kprobes-ftrace.o := n +GCOV_PROFILE_syscall_64.o := n +KCOV_INSTRUMENT_syscall_64.o := n +UBSAN_SANITIZE_syscall_64.o := n UBSAN_SANITIZE_vdso.o := n # Necessary for booting with kcov enabled on book3e machines -- cgit v1.2.3-58-ga151 From e9bdf7e655b9ee81ee912fae1d59df48ce7311b6 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 27 May 2020 16:07:58 +0200 Subject: gpio: fix locking open drain IRQ lines We provided the right semantics on open drain lines being by definition output but incidentally the irq set up function would only allow IRQs on lines that were "not output". Fix the semantics to allow output open drain lines to be used for IRQs. Reported-by: Hans Verkuil Signed-off-by: Linus Walleij Signed-off-by: Hans Verkuil Tested-by: Hans Verkuil Cc: Russell King Cc: stable@vger.kernel.org # v5.3+ Link: https://lore.kernel.org/r/20200527140758.162280-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index b4b5792fe2ff..c14f0784274a 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -4220,7 +4220,9 @@ int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset) } } - if (test_bit(FLAG_IS_OUT, &desc->flags)) { + /* To be valid for IRQ the line needs to be input or open drain */ + if (test_bit(FLAG_IS_OUT, &desc->flags) && + !test_bit(FLAG_OPEN_DRAIN, &desc->flags)) { chip_err(gc, "%s: tried to flag a GPIO set as output for IRQ\n", __func__); @@ -4283,7 +4285,12 @@ void gpiochip_enable_irq(struct gpio_chip *gc, unsigned int offset) if (!IS_ERR(desc) && !WARN_ON(!test_bit(FLAG_USED_AS_IRQ, &desc->flags))) { - WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags)); + /* + * We must not be output when using IRQ UNLESS we are + * open drain. + */ + WARN_ON(test_bit(FLAG_IS_OUT, &desc->flags) && + !test_bit(FLAG_OPEN_DRAIN, &desc->flags)); set_bit(FLAG_IRQ_IS_ENABLED, &desc->flags); } } -- cgit v1.2.3-58-ga151 From 7cc31613734c4870ae32f5265d576ef296621343 Mon Sep 17 00:00:00 2001 From: Qiushi Wu Date: Wed, 27 May 2020 16:00:19 -0500 Subject: iommu: Fix reference count leak in iommu_group_alloc. kobject_init_and_add() takes reference even when it fails. Thus, when kobject_init_and_add() returns an error, kobject_put() must be called to properly clean up the kobject. Fixes: d72e31c93746 ("iommu: IOMMU Groups") Signed-off-by: Qiushi Wu Link: https://lore.kernel.org/r/20200527210020.6522-1-wu000273@umn.edu Signed-off-by: Joerg Roedel --- drivers/iommu/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 1faa08c8bbb4..03d6a26687bc 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -510,7 +510,7 @@ struct iommu_group *iommu_group_alloc(void) NULL, "%d", group->id); if (ret) { ida_simple_remove(&iommu_group_ida, group->id); - kfree(group); + kobject_put(&group->kobj); return ERR_PTR(ret); } -- cgit v1.2.3-58-ga151 From bf71bc16e02162388808949b179d59d0b571b965 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 28 May 2020 22:29:25 +0200 Subject: parisc: Fix kernel panic in mem_init() The Debian kernel v5.6 triggers this kernel panic: Kernel panic - not syncing: Bad Address (null pointer deref?) Bad Address (null pointer deref?): Code=26 (Data memory access rights trap) at addr 0000000000000000 CPU: 0 PID: 0 Comm: swapper Not tainted 5.6.0-2-parisc64 #1 Debian 5.6.14-1 IAOQ[0]: mem_init+0xb0/0x150 IAOQ[1]: mem_init+0xb4/0x150 RP(r2): start_kernel+0x6c8/0x1190 Backtrace: [<0000000040101ab4>] start_kernel+0x6c8/0x1190 [<0000000040108574>] start_parisc+0x158/0x1b8 on a HP-PARISC rp3440 machine with this memory layout: Memory Ranges: 0) Start 0x0000000000000000 End 0x000000003fffffff Size 1024 MB 1) Start 0x0000004040000000 End 0x00000040ffdfffff Size 3070 MB Fix the crash by avoiding virt_to_page() and similar functions in mem_init() until the memory zones have been fully set up. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org # v5.0+ --- arch/parisc/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 5224fb38d766..01d7071b23f7 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -562,7 +562,7 @@ void __init mem_init(void) > BITS_PER_LONG); high_memory = __va((max_pfn << PAGE_SHIFT)); - set_max_mapnr(page_to_pfn(virt_to_page(high_memory - 1)) + 1); + set_max_mapnr(max_low_pfn); memblock_free_all(); #ifdef CONFIG_PA11 -- cgit v1.2.3-58-ga151 From 20be493b787cd581c9fffad7fcd6bfbe6af1050c Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Tue, 26 May 2020 20:11:51 +0200 Subject: gfs2: Even more gfs2_find_jhead fixes Fix several issues in the previous gfs2_find_jhead fix: * When updating @blocks_submitted, @block refers to the first block block not submitted yet, not the last block submitted, so fix an off-by-one error. * We want to ensure that @blocks_submitted is far enough ahead of @blocks_read to guarantee that there is in-flight I/O. Otherwise, we'll eventually end up waiting for pages that haven't been submitted, yet. * It's much easier to compare the number of blocks added with the number of blocks submitted to limit the maximum bio size. * Even with bio chaining, we can keep adding blocks until we reach the maximum bio size, as long as we stop at a page boundary. This simplifies the logic. Signed-off-by: Andreas Gruenbacher Reviewed-by: Bob Peterson --- fs/gfs2/lops.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index 48b54ec1c793..cb2a11b458c6 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -509,12 +509,12 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, unsigned int bsize = sdp->sd_sb.sb_bsize, off; unsigned int bsize_shift = sdp->sd_sb.sb_bsize_shift; unsigned int shift = PAGE_SHIFT - bsize_shift; - unsigned int max_bio_size = 2 * 1024 * 1024; + unsigned int max_blocks = 2 * 1024 * 1024 >> bsize_shift; struct gfs2_journal_extent *je; int sz, ret = 0; struct bio *bio = NULL; struct page *page = NULL; - bool bio_chained = false, done = false; + bool done = false; errseq_t since; memset(head, 0, sizeof(*head)); @@ -537,10 +537,7 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, off = 0; } - if (!bio || (bio_chained && !off) || - bio->bi_iter.bi_size >= max_bio_size) { - /* start new bio */ - } else { + if (bio && (off || block < blocks_submitted + max_blocks)) { sector_t sector = dblock << sdp->sd_fsb2bb_shift; if (bio_end_sector(bio) == sector) { @@ -553,19 +550,17 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, (PAGE_SIZE - off) >> bsize_shift; bio = gfs2_chain_bio(bio, blocks); - bio_chained = true; goto add_block_to_new_bio; } } if (bio) { - blocks_submitted = block + 1; + blocks_submitted = block; submit_bio(bio); } bio = gfs2_log_alloc_bio(sdp, dblock, gfs2_end_log_read); bio->bi_opf = REQ_OP_READ; - bio_chained = false; add_block_to_new_bio: sz = bio_add_page(bio, page, bsize, off); BUG_ON(sz != bsize); @@ -573,7 +568,7 @@ block_added: off += bsize; if (off == PAGE_SIZE) page = NULL; - if (blocks_submitted < 2 * max_bio_size >> bsize_shift) { + if (blocks_submitted <= blocks_read + max_blocks) { /* Keep at least one bio in flight */ continue; } -- cgit v1.2.3-58-ga151 From 8fc3e29be9248048f449793502c15af329f35c6e Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Wed, 20 May 2020 17:32:08 +0000 Subject: net/mlx5: Fix crash upon suspend/resume Currently a Linux system with the mlx5 NIC always crashes upon hibernation - suspend/resume. Add basic callbacks so the NIC could be suspended and resumed. Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Tested-by: Dexuan Cui Signed-off-by: Mark Bloch Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index c1618b818f3a..17f818a54090 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1549,6 +1549,22 @@ static void shutdown(struct pci_dev *pdev) mlx5_pci_disable_device(dev); } +static int mlx5_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct mlx5_core_dev *dev = pci_get_drvdata(pdev); + + mlx5_unload_one(dev, false); + + return 0; +} + +static int mlx5_resume(struct pci_dev *pdev) +{ + struct mlx5_core_dev *dev = pci_get_drvdata(pdev); + + return mlx5_load_one(dev, false); +} + static const struct pci_device_id mlx5_core_pci_table[] = { { PCI_VDEVICE(MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTIB) }, { PCI_VDEVICE(MELLANOX, 0x1012), MLX5_PCI_DEV_IS_VF}, /* Connect-IB VF */ @@ -1592,6 +1608,8 @@ static struct pci_driver mlx5_core_driver = { .id_table = mlx5_core_pci_table, .probe = init_one, .remove = remove_one, + .suspend = mlx5_suspend, + .resume = mlx5_resume, .shutdown = shutdown, .err_handler = &mlx5_err_handler, .sriov_configure = mlx5_core_sriov_configure, -- cgit v1.2.3-58-ga151 From 0a2a6f498fa060cc0d592d56148da856e9d77bd8 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 27 May 2020 21:46:09 +0300 Subject: net/mlx5e: Fix stats update for matchall classifier It's bytes, packets, lastused. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 5bcf95fcdd59..cac36c27c7fa 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -4614,7 +4614,7 @@ void mlx5e_tc_stats_matchall(struct mlx5e_priv *priv, dpkts = cur_stats.rx_packets - rpriv->prev_vf_vport_stats.rx_packets; dbytes = cur_stats.rx_bytes - rpriv->prev_vf_vport_stats.rx_bytes; rpriv->prev_vf_vport_stats = cur_stats; - flow_stats_update(&ma->stats, dpkts, dbytes, jiffies, + flow_stats_update(&ma->stats, dbytes, dpkts, jiffies, FLOW_ACTION_HW_STATS_DELAYED); } -- cgit v1.2.3-58-ga151 From 20300aafa7a2719f71d50f97a8846459d9869b75 Mon Sep 17 00:00:00 2001 From: Maor Dickman Date: Sun, 24 May 2020 09:45:44 +0300 Subject: net/mlx5e: Remove warning "devices are not on same switch HW" On tunnel decap rule insertion, the indirect mechanism will attempt to offload the rule on all uplink representors which will trigger the "devices are not on same switch HW, can't offload forwarding" message for the uplink which isn't on the same switch HW as the VF representor. The above flow is valid and shouldn't cause warning message, fix by removing the warning and only report this flow using extack. Fixes: 321348475d54 ("net/mlx5e: Fix allowed tc redirect merged eswitch offload cases") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index cac36c27c7fa..6e7b2ce29d41 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -3849,10 +3849,6 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, if (!mlx5e_is_valid_eswitch_fwd_dev(priv, out_dev)) { NL_SET_ERR_MSG_MOD(extack, "devices are not on same switch HW, can't offload forwarding"); - netdev_warn(priv->netdev, - "devices %s %s not on same switch HW, can't offload forwarding\n", - priv->netdev->name, - out_dev->name); return -EOPNOTSUPP; } -- cgit v1.2.3-58-ga151 From b623603bbb473e7e19af358b98335e63bebb2eb5 Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Mon, 13 Apr 2020 11:31:00 +0300 Subject: net/mlx5e: Fix arch depending casting issue in FEC Change type of active_fec to u32 to match the type expected by mlx5e_get_fec_mode. Copy active_fec and configured_fec values to unsigned long before preforming bitwise manipulations. Take the same approach when configuring FEC over 50G link modes: copy the policy into an unsigned long and only than preform bitwise operations. Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes") Signed-off-by: Aya Levin Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 24 ++++++++++++---------- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 20 ++++++++++-------- 2 files changed, 24 insertions(+), 20 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index 2c4a670c8ffd..2a8950b3056f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -369,17 +369,19 @@ enum mlx5e_fec_supported_link_mode { *_policy = MLX5_GET(pplm_reg, _buf, fec_override_admin_##link); \ } while (0) -#define MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(buf, policy, write, link) \ - do { \ - u16 *__policy = &(policy); \ - bool _write = (write); \ - \ - if (_write && *__policy) \ - *__policy = find_first_bit((u_long *)__policy, \ - sizeof(u16) * BITS_PER_BYTE);\ - MLX5E_FEC_OVERRIDE_ADMIN_POLICY(buf, *__policy, _write, link); \ - if (!_write && *__policy) \ - *__policy = 1 << *__policy; \ +#define MLX5E_FEC_OVERRIDE_ADMIN_50G_POLICY(buf, policy, write, link) \ + do { \ + unsigned long policy_long; \ + u16 *__policy = &(policy); \ + bool _write = (write); \ + \ + policy_long = *__policy; \ + if (_write && *__policy) \ + *__policy = find_first_bit(&policy_long, \ + sizeof(policy_long) * BITS_PER_BYTE);\ + MLX5E_FEC_OVERRIDE_ADMIN_POLICY(buf, *__policy, _write, link); \ + if (!_write && *__policy) \ + *__policy = 1 << *__policy; \ } while (0) /* get/set FEC admin field for a given speed */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 6d703ddee4e2..6f582eb83e54 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -665,11 +665,12 @@ static const u32 pplm_fec_2_ethtool_linkmodes[] = { static int get_fec_supported_advertised(struct mlx5_core_dev *dev, struct ethtool_link_ksettings *link_ksettings) { - u_long active_fec = 0; + unsigned long active_fec_long; + u32 active_fec; u32 bitn; int err; - err = mlx5e_get_fec_mode(dev, (u32 *)&active_fec, NULL); + err = mlx5e_get_fec_mode(dev, &active_fec, NULL); if (err) return (err == -EOPNOTSUPP) ? 0 : err; @@ -682,10 +683,11 @@ static int get_fec_supported_advertised(struct mlx5_core_dev *dev, MLX5E_ADVERTISE_SUPPORTED_FEC(MLX5E_FEC_LLRS_272_257_1, ETHTOOL_LINK_MODE_FEC_LLRS_BIT); + active_fec_long = active_fec; /* active fec is a bit set, find out which bit is set and * advertise the corresponding ethtool bit */ - bitn = find_first_bit(&active_fec, sizeof(u32) * BITS_PER_BYTE); + bitn = find_first_bit(&active_fec_long, sizeof(active_fec_long) * BITS_PER_BYTE); if (bitn < ARRAY_SIZE(pplm_fec_2_ethtool_linkmodes)) __set_bit(pplm_fec_2_ethtool_linkmodes[bitn], link_ksettings->link_modes.advertising); @@ -1517,8 +1519,8 @@ static int mlx5e_get_fecparam(struct net_device *netdev, { struct mlx5e_priv *priv = netdev_priv(netdev); struct mlx5_core_dev *mdev = priv->mdev; - u16 fec_configured = 0; - u32 fec_active = 0; + u16 fec_configured; + u32 fec_active; int err; err = mlx5e_get_fec_mode(mdev, &fec_active, &fec_configured); @@ -1526,14 +1528,14 @@ static int mlx5e_get_fecparam(struct net_device *netdev, if (err) return err; - fecparam->active_fec = pplm2ethtool_fec((u_long)fec_active, - sizeof(u32) * BITS_PER_BYTE); + fecparam->active_fec = pplm2ethtool_fec((unsigned long)fec_active, + sizeof(unsigned long) * BITS_PER_BYTE); if (!fecparam->active_fec) return -EOPNOTSUPP; - fecparam->fec = pplm2ethtool_fec((u_long)fec_configured, - sizeof(u16) * BITS_PER_BYTE); + fecparam->fec = pplm2ethtool_fec((unsigned long)fec_configured, + sizeof(unsigned long) * BITS_PER_BYTE); return 0; } -- cgit v1.2.3-58-ga151 From ebeaf084ad5c0eeaf8ea3314f62cc28cb79d529f Mon Sep 17 00:00:00 2001 From: Tal Gilboa Date: Thu, 23 Apr 2020 13:23:06 +0300 Subject: net/mlx5e: Properly set default values when disabling adaptive moderation Add a call to mlx5e_reset_rx/tx_moderation() when enabling/disabling adaptive moderation, in order to select the proper default values. In order to do so, we separate the logic of selecting the moderation values and setting moderion mode (CQE/EQE based). Fixes: 0088cbbc4b66 ("net/mlx5e: Enable CQE based moderation on TX CQ") Fixes: 9908aa292971 ("net/mlx5e: CQE based moderation") Signed-off-by: Tal Gilboa Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 10 ++++++---- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 21 +++++++++++++++++---- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 20 ++++++++++++++------ 3 files changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 59745402747b..0a5aada0f50f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -1068,10 +1068,12 @@ void mlx5e_deactivate_priv_channels(struct mlx5e_priv *priv); void mlx5e_build_default_indir_rqt(u32 *indirection_rqt, int len, int num_channels); -void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, - u8 cq_period_mode); -void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, - u8 cq_period_mode); + +void mlx5e_reset_tx_moderation(struct mlx5e_params *params, u8 cq_period_mode); +void mlx5e_reset_rx_moderation(struct mlx5e_params *params, u8 cq_period_mode); +void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); +void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode); + void mlx5e_set_rq_type(struct mlx5_core_dev *mdev, struct mlx5e_params *params); void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev, struct mlx5e_params *params); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 6f582eb83e54..bc290ae80a53 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -527,8 +527,8 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, struct dim_cq_moder *rx_moder, *tx_moder; struct mlx5_core_dev *mdev = priv->mdev; struct mlx5e_channels new_channels = {}; + bool reset_rx, reset_tx; int err = 0; - bool reset; if (!MLX5_CAP_GEN(mdev, cq_moderation)) return -EOPNOTSUPP; @@ -566,15 +566,28 @@ int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv, } /* we are opened */ - reset = (!!coal->use_adaptive_rx_coalesce != priv->channels.params.rx_dim_enabled) || - (!!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled); + reset_rx = !!coal->use_adaptive_rx_coalesce != priv->channels.params.rx_dim_enabled; + reset_tx = !!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled; - if (!reset) { + if (!reset_rx && !reset_tx) { mlx5e_set_priv_channels_coalesce(priv, coal); priv->channels.params = new_channels.params; goto out; } + if (reset_rx) { + u8 mode = MLX5E_GET_PFLAG(&new_channels.params, + MLX5E_PFLAG_RX_CQE_BASED_MODER); + + mlx5e_reset_rx_moderation(&new_channels.params, mode); + } + if (reset_tx) { + u8 mode = MLX5E_GET_PFLAG(&new_channels.params, + MLX5E_PFLAG_TX_CQE_BASED_MODER); + + mlx5e_reset_tx_moderation(&new_channels.params, mode); + } + err = mlx5e_safe_switch_channels(priv, &new_channels, NULL, NULL); out: diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c6b83042d431..bd8d0e096085 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -4716,7 +4716,7 @@ static u8 mlx5_to_net_dim_cq_period_mode(u8 cq_period_mode) DIM_CQ_PERIOD_MODE_START_FROM_EQE; } -void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) +void mlx5e_reset_tx_moderation(struct mlx5e_params *params, u8 cq_period_mode) { if (params->tx_dim_enabled) { u8 dim_period_mode = mlx5_to_net_dim_cq_period_mode(cq_period_mode); @@ -4725,13 +4725,9 @@ void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) } else { params->tx_cq_moderation = mlx5e_get_def_tx_moderation(cq_period_mode); } - - MLX5E_SET_PFLAG(params, MLX5E_PFLAG_TX_CQE_BASED_MODER, - params->tx_cq_moderation.cq_period_mode == - MLX5_CQ_PERIOD_MODE_START_FROM_CQE); } -void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) +void mlx5e_reset_rx_moderation(struct mlx5e_params *params, u8 cq_period_mode) { if (params->rx_dim_enabled) { u8 dim_period_mode = mlx5_to_net_dim_cq_period_mode(cq_period_mode); @@ -4740,7 +4736,19 @@ void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) } else { params->rx_cq_moderation = mlx5e_get_def_rx_moderation(cq_period_mode); } +} + +void mlx5e_set_tx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) +{ + mlx5e_reset_tx_moderation(params, cq_period_mode); + MLX5E_SET_PFLAG(params, MLX5E_PFLAG_TX_CQE_BASED_MODER, + params->tx_cq_moderation.cq_period_mode == + MLX5_CQ_PERIOD_MODE_START_FROM_CQE); +} +void mlx5e_set_rx_cq_mode_params(struct mlx5e_params *params, u8 cq_period_mode) +{ + mlx5e_reset_rx_moderation(params, cq_period_mode); MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_BASED_MODER, params->rx_cq_moderation.cq_period_mode == MLX5_CQ_PERIOD_MODE_START_FROM_CQE); -- cgit v1.2.3-58-ga151 From cb9a0641b531ac11cd7e3076de23ceada19b892e Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Mon, 25 May 2020 16:57:51 +0300 Subject: net/mlx5e: Fix MLX5_TC_CT dependencies Change MLX5_TC_CT config dependencies to include MLX5_ESWITCH instead of MLX5_CORE_EN && NET_SWITCHDEV, which are already required by MLX5_ESWITCH. Without this change mlx5 fails to compile if user disables MLX5_ESWITCH without also manually disabling MLX5_TC_CT. Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking") Signed-off-by: Vlad Buslov Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 7d69a3061f17..fd375cbe586e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -80,7 +80,7 @@ config MLX5_ESWITCH config MLX5_TC_CT bool "MLX5 TC connection tracking offload support" - depends on MLX5_CORE_EN && NET_SWITCHDEV && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT + depends on MLX5_ESWITCH && NF_FLOW_TABLE && NET_ACT_CT && NET_TC_SKB_EXT default y help Say Y here if you want to support offloading connection tracking rules -- cgit v1.2.3-58-ga151 From a683012a8e77675a1947cc8f11f97cdc1d5bb769 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 19 Apr 2020 14:12:35 +0200 Subject: net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() The drivers reports EINVAL to userspace through netlink on invalid meta match. This is confusing since EINVAL is usually reserved for malformed netlink messages. Replace it by more meaningful codes. Fixes: 6d65bc64e232 ("net/mlx5e: Add mlx5e_flower_parse_meta support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 6e7b2ce29d41..10f705761666 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -2068,7 +2068,7 @@ static int mlx5e_flower_parse_meta(struct net_device *filter_dev, flow_rule_match_meta(rule, &match); if (match.mask->ingress_ifindex != 0xFFFFFFFF) { NL_SET_ERR_MSG_MOD(extack, "Unsupported ingress ifindex mask"); - return -EINVAL; + return -EOPNOTSUPP; } ingress_dev = __dev_get_by_index(dev_net(filter_dev), @@ -2076,13 +2076,13 @@ static int mlx5e_flower_parse_meta(struct net_device *filter_dev, if (!ingress_dev) { NL_SET_ERR_MSG_MOD(extack, "Can't find the ingress port to match on"); - return -EINVAL; + return -ENOENT; } if (ingress_dev != filter_dev) { NL_SET_ERR_MSG_MOD(extack, "Can't match on the ingress filter port"); - return -EINVAL; + return -EOPNOTSUPP; } return 0; -- cgit v1.2.3-58-ga151 From 18644cec714aabbab173729192c7594ee57a406b Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Thu, 28 May 2020 21:38:36 -0700 Subject: bpf: Fix use-after-free in fmod_ret check Fix the following issue: [ 436.749342] BUG: KASAN: use-after-free in bpf_trampoline_put+0x39/0x2a0 [ 436.749995] Write of size 4 at addr ffff8881ef38b8a0 by task kworker/3:5/2243 [ 436.750712] [ 436.752677] Workqueue: events bpf_prog_free_deferred [ 436.753183] Call Trace: [ 436.756483] bpf_trampoline_put+0x39/0x2a0 [ 436.756904] bpf_prog_free_deferred+0x16d/0x3d0 [ 436.757377] process_one_work+0x94a/0x15b0 [ 436.761969] [ 436.762130] Allocated by task 2529: [ 436.763323] bpf_trampoline_lookup+0x136/0x540 [ 436.763776] bpf_check+0x2872/0xa0a8 [ 436.764144] bpf_prog_load+0xb6f/0x1350 [ 436.764539] __do_sys_bpf+0x16d7/0x3720 [ 436.765825] [ 436.765988] Freed by task 2529: [ 436.767084] kfree+0xc6/0x280 [ 436.767397] bpf_trampoline_put+0x1fd/0x2a0 [ 436.767826] bpf_check+0x6832/0xa0a8 [ 436.768197] bpf_prog_load+0xb6f/0x1350 [ 436.768594] __do_sys_bpf+0x16d7/0x3720 prog->aux->trampoline = tr should be set only when prog is valid. Otherwise prog freeing will try to put trampoline via prog->aux->trampoline, but it may not point to a valid trampoline. Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Signed-off-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann Acked-by: KP Singh Link: https://lore.kernel.org/bpf/20200529043839.15824-2-alexei.starovoitov@gmail.com --- kernel/bpf/verifier.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 8d7ee40e2748..bfea3f9a972f 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -10428,22 +10428,13 @@ static int check_struct_ops_btf_id(struct bpf_verifier_env *env) } #define SECURITY_PREFIX "security_" -static int check_attach_modify_return(struct bpf_verifier_env *env) +static int check_attach_modify_return(struct bpf_prog *prog, unsigned long addr) { - struct bpf_prog *prog = env->prog; - unsigned long addr = (unsigned long) prog->aux->trampoline->func.addr; - - /* This is expected to be cleaned up in the future with the KRSI effort - * introducing the LSM_HOOK macro for cleaning up lsm_hooks.h. - */ if (within_error_injection_list(addr) || !strncmp(SECURITY_PREFIX, prog->aux->attach_func_name, sizeof(SECURITY_PREFIX) - 1)) return 0; - verbose(env, "fmod_ret attach_btf_id %u (%s) is not modifiable\n", - prog->aux->attach_btf_id, prog->aux->attach_func_name); - return -EINVAL; } @@ -10654,11 +10645,18 @@ static int check_attach_btf_id(struct bpf_verifier_env *env) goto out; } } + + if (prog->expected_attach_type == BPF_MODIFY_RETURN) { + ret = check_attach_modify_return(prog, addr); + if (ret) + verbose(env, "%s() is not modifiable\n", + prog->aux->attach_func_name); + } + + if (ret) + goto out; tr->func.addr = (void *)addr; prog->aux->trampoline = tr; - - if (prog->expected_attach_type == BPF_MODIFY_RETURN) - ret = check_attach_modify_return(env); out: mutex_unlock(&tr->mutex); if (ret) -- cgit v1.2.3-58-ga151 From 3a71dc366d4aa51a22f385445f2862231d3fda3b Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 29 May 2020 10:28:40 -0700 Subject: bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones With the latest trunk llvm (llvm 11), I hit a verifier issue for test_prog subtest test_verif_scale1. The following simplified example illustrate the issue: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... w2 = w9 /* R2_w=inv0 */ r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r2 /* R6_w=inv(id=0) */ r3 = r6 /* R3_w=inv(id=0) */ r3 += 14 /* R3_w=inv(id=0) */ if r3 > r8 goto end r5 = *(u32 *)(r6 + 0) /* R6_w=inv(id=0) */ <== error here: R6 invalid mem access 'inv' ... end: In real test_verif_scale1 code, "w9 = 0" and "w2 = w9" are in different basic blocks. In the above, after "r6 += r2", r6 becomes a scalar, which eventually caused the memory access error. The correct register state should be a pkt pointer. The inprecise register state starts at "w2 = w9". The 32bit register w9 is 0, in __reg_assign_32_into_64(), the 64bit reg->smax_value is assigned to be U32_MAX. The 64bit reg->smin_value is 0 and the 64bit register itself remains constant based on reg->var_off. In adjust_ptr_min_max_vals(), the verifier checks for a known constant, smin_val must be equal to smax_val. Since they are not equal, the verifier decides r6 is a unknown scalar, which caused later failure. The llvm10 does not have this issue as it generates different code: w9 = 0 /* R9_w=inv0 */ r8 = *(u32 *)(r1 + 80) /* __sk_buff->data_end */ r7 = *(u32 *)(r1 + 76) /* __sk_buff->data */ ...... r6 = r7 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r6 += r9 /* R6_w=pkt(id=0,off=0,r=0,imm=0) */ r3 = r6 /* R3_w=pkt(id=0,off=0,r=0,imm=0) */ r3 += 14 /* R3_w=pkt(id=0,off=14,r=0,imm=0) */ if r3 > r8 goto end ... To fix the above issue, we can include zero in the test condition for assigning the s32_max_value and s32_min_value to their 64-bit equivalents smax_value and smin_value. Further, fix the condition to avoid doing zero extension bounds checks when s32_min_value <= 0. This could allow for the case where bounds 32-bit bounds (-1,1) get incorrectly translated to (0,1) 64-bit bounds. When in-fact the -1 min value needs to force U32_MAX bound. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/159077331983.6014.5758956193749002737.stgit@john-Precision-5820-Tower --- kernel/bpf/verifier.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index bfea3f9a972f..efe14cf24bc6 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1168,14 +1168,14 @@ static void __reg_assign_32_into_64(struct bpf_reg_state *reg) * but must be positive otherwise set to worse case bounds * and refine later from tnum. */ - if (reg->s32_min_value > 0) - reg->smin_value = reg->s32_min_value; - else - reg->smin_value = 0; - if (reg->s32_max_value > 0) + if (reg->s32_min_value >= 0 && reg->s32_max_value >= 0) reg->smax_value = reg->s32_max_value; else reg->smax_value = U32_MAX; + if (reg->s32_min_value >= 0) + reg->smin_value = reg->s32_min_value; + else + reg->smin_value = 0; } static void __reg_combine_32_into_64(struct bpf_reg_state *reg) -- cgit v1.2.3-58-ga151 From e3effcdfe02eb20f23d4f1833c75658ddc49e65a Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 29 May 2020 10:28:59 -0700 Subject: bpf, selftests: Verifier bounds tests need to be updated After previous fix for zero extension test_verifier tests #65 and #66 now fail. Before the fix we can see the alu32 mov op at insn 10 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=0,smax_value=2147483647, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm After the fix at insn 10 because we have 's32_min_value < 0' the following step 11 now has 'smax_value=U32_MAX' where before we pulled the s32_max_value bound into the smax_value as seen above in 11 with smax_value=2147483647. 10: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=4294967168,smax_value=4294967423, umin_value=4294967168,umax_value=4294967423, var_off=(0x0; 0x1ffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 10: (bc) w1 = w1 11: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=4294967295, umin_value=0,umax_value=4294967295, var_off=(0x0; 0xffffffff), s32_min_value=-2147483648, s32_max_value=2147483647, u32_min_value=0, u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm The fall out of this is by the time we get to the failing instruction at step 14 where previously we had the following: 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=72057594021150720,smax_value=72057594029539328, umin_value=72057594021150720,umax_value=72057594029539328, var_off=(0xffffffff000000; 0xffffff), s32_min_value=-16777216,s32_max_value=-1, u32_min_value=-16777216,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 We now have, 14: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=inv(id=0, smin_value=0,smax_value=72057594037927935, umin_value=0,umax_value=72057594037927935, var_off=(0x0; 0xffffffffffffff), s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm 14: (0f) r0 += r1 In the original step 14 'smin_value=72057594021150720' this trips the logic in the verifier function check_reg_sane_offset(), if (smin >= BPF_MAX_VAR_OFF || smin <= -BPF_MAX_VAR_OFF) { verbose(env, "value %lld makes %s pointer be out of bounds\n", smin, reg_type_str[type]); return false; } Specifically, the 'smin <= -BPF_MAX_VAR_OFF' check. But with the fix at step 14 we have bounds 'smin_value=0' so the above check is not tripped because BPF_MAX_VAR_OFF=1<<29. We have a smin_value=0 here because at step 10 the smaller smin_value=0 means the subtractions at steps 11 and 12 bring the smin_value negative. 11: (17) r1 -= 2147483584 12: (17) r1 -= 2147483584 13: (77) r1 >>= 8 Then the shift clears the top bit and smin_value is set to 0. Note we still have the smax_value in the fixed code so any reads will fail. An alternative would be to have reg_sane_check() do both smin and smax value tests. To fix the test we can omit the 'r1 >>=8' at line 13. This will change the err string, but keeps the intention of the test as suggseted by the title, "check after truncation of boundary-crossing range". If the verifier logic changes a different value is likely to be thrown in the error or the error will no longer be thrown forcing this test to be examined. With this change we see the new state at step 13. 13: R0_w=map_value(id=0,off=0,ks=8,vs=8,imm=0) R1_w=invP(id=0, smin_value=-4294967168,smax_value=127, umin_value=0,umax_value=18446744073709551615, s32_min_value=-2147483648,s32_max_value=2147483647, u32_min_value=0,u32_max_value=-1) R10=fp0 fp-8_w=mmmmmmmm Giving the expected out of bounds error, "value -4294967168 makes map_value pointer be out of bounds" However, for unpriv case we see a different error now because of the mixed signed bounds pointer arithmatic. This seems OK so I've only added the unpriv_errstr for this. Another optino may have been to do addition on r1 instead of subtraction but I favor the approach above slightly. Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/159077333942.6014.14004320043595756079.stgit@john-Precision-5820-Tower --- tools/testing/selftests/bpf/verifier/bounds.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/tools/testing/selftests/bpf/verifier/bounds.c b/tools/testing/selftests/bpf/verifier/bounds.c index a253a064e6e0..fafa5409bdac 100644 --- a/tools/testing/selftests/bpf/verifier/bounds.c +++ b/tools/testing/selftests/bpf/verifier/bounds.c @@ -238,7 +238,7 @@ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), - BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 8), /* r1 = [0x00, 0xff] */ BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_0, 0), BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 0xffffff80 >> 1), @@ -253,10 +253,6 @@ * [0xffff'ffff'0000'0080, 0xffff'ffff'ffff'ffff] */ BPF_ALU64_IMM(BPF_SUB, BPF_REG_1, 0xffffff80 >> 1), - /* r1 = 0 or - * [0x00ff'ffff'ff00'0000, 0x00ff'ffff'ffff'ffff] - */ - BPF_ALU64_IMM(BPF_RSH, BPF_REG_1, 8), /* error on OOB pointer computation */ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1), /* exit */ @@ -265,8 +261,10 @@ }, .fixup_map_hash_8b = { 3 }, /* not actually fully unbounded, but the bound is very high */ - .errstr = "value 72057594021150720 makes map_value pointer be out of bounds", - .result = REJECT + .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds, pointer arithmetic with it prohibited for !root", + .result_unpriv = REJECT, + .errstr = "value -4294967168 makes map_value pointer be out of bounds", + .result = REJECT, }, { "bounds check after truncation of boundary-crossing range (2)", @@ -276,7 +274,7 @@ BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), - BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 9), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 8), /* r1 = [0x00, 0xff] */ BPF_LDX_MEM(BPF_B, BPF_REG_1, BPF_REG_0, 0), BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 0xffffff80 >> 1), @@ -293,10 +291,6 @@ * [0xffff'ffff'0000'0080, 0xffff'ffff'ffff'ffff] */ BPF_ALU64_IMM(BPF_SUB, BPF_REG_1, 0xffffff80 >> 1), - /* r1 = 0 or - * [0x00ff'ffff'ff00'0000, 0x00ff'ffff'ffff'ffff] - */ - BPF_ALU64_IMM(BPF_RSH, BPF_REG_1, 8), /* error on OOB pointer computation */ BPF_ALU64_REG(BPF_ADD, BPF_REG_0, BPF_REG_1), /* exit */ @@ -305,8 +299,10 @@ }, .fixup_map_hash_8b = { 3 }, /* not actually fully unbounded, but the bound is very high */ - .errstr = "value 72057594021150720 makes map_value pointer be out of bounds", - .result = REJECT + .errstr_unpriv = "R1 has unknown scalar with mixed signed bounds, pointer arithmetic with it prohibited for !root", + .result_unpriv = REJECT, + .errstr = "value -4294967168 makes map_value pointer be out of bounds", + .result = REJECT, }, { "bounds check after wrapping 32-bit addition", -- cgit v1.2.3-58-ga151 From cf66c29bd7534813d2e1971fab71e25fe87c7e0a Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 29 May 2020 10:29:18 -0700 Subject: bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones Added a verifier test for assigning 32bit reg states to 64bit where 32bit reg holds a constant value of 0. Without previous kernel verifier.c fix, the test in this patch will fail. Signed-off-by: Yonghong Song Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/159077335867.6014.2075350327073125374.stgit@john-Precision-5820-Tower --- tools/testing/selftests/bpf/verifier/bounds.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/tools/testing/selftests/bpf/verifier/bounds.c b/tools/testing/selftests/bpf/verifier/bounds.c index fafa5409bdac..58f4aa593b1b 100644 --- a/tools/testing/selftests/bpf/verifier/bounds.c +++ b/tools/testing/selftests/bpf/verifier/bounds.c @@ -535,3 +535,25 @@ }, .result = ACCEPT }, +{ + "assigning 32bit bounds to 64bit for wA = 0, wB = wA", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_8, BPF_REG_1, + offsetof(struct __sk_buff, data_end)), + BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_1, + offsetof(struct __sk_buff, data)), + BPF_MOV32_IMM(BPF_REG_9, 0), + BPF_MOV32_REG(BPF_REG_2, BPF_REG_9), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_7), + BPF_ALU64_REG(BPF_ADD, BPF_REG_6, BPF_REG_2), + BPF_MOV64_REG(BPF_REG_3, BPF_REG_6), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 8), + BPF_JMP_REG(BPF_JGT, BPF_REG_3, BPF_REG_8, 1), + BPF_LDX_MEM(BPF_W, BPF_REG_5, BPF_REG_6, 0), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .result = ACCEPT, + .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, +}, -- cgit v1.2.3-58-ga151 From 96d10d5b192e7f064457fd957e6a3ce8c2dce4b4 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Thu, 28 May 2020 15:15:13 +0800 Subject: neigh: fix ARP retransmit timer guard In commit 19e16d220f0a ("neigh: support smaller retrans_time settting") we add more accurate control for ARP and NS. But for ARP I forgot to update the latest guard in neigh_timer_handler(), then the next retransmit would be reset to jiffies + HZ/2 if we set the retrans_time less than 500ms. Fix it by setting the time_before() check to HZ/100. IPv6 does not have this issue. Reported-by: Jianwen Ji Fixes: 19e16d220f0a ("neigh: support smaller retrans_time settting") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- net/core/neighbour.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 116139233d57..dbe0c6ead773 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1082,8 +1082,8 @@ static void neigh_timer_handler(struct timer_list *t) } if (neigh->nud_state & NUD_IN_TIMER) { - if (time_before(next, jiffies + HZ/2)) - next = jiffies + HZ/2; + if (time_before(next, jiffies + HZ/100)) + next = jiffies + HZ/100; if (!mod_timer(&neigh->timer, next)) neigh_hold(neigh); } -- cgit v1.2.3-58-ga151 From 3decabdc714ca56c944f4669b4cdec5c2c1cea23 Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Thu, 28 May 2020 18:20:37 +0800 Subject: NFC: st21nfca: add missed kfree_skb() in an error path st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path. Add the missed function call to fix it. Fixes: 1892bf844ea0 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode") Signed-off-by: Chuhong Yuan Signed-off-by: David S. Miller --- drivers/nfc/st21nfca/dep.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/st21nfca/dep.c b/drivers/nfc/st21nfca/dep.c index a1d69f9b2d4a..0b9ca6d20ffa 100644 --- a/drivers/nfc/st21nfca/dep.c +++ b/drivers/nfc/st21nfca/dep.c @@ -173,8 +173,10 @@ static int st21nfca_tm_send_atr_res(struct nfc_hci_dev *hdev, memcpy(atr_res->gbi, atr_req->gbi, gb_len); r = nfc_set_remote_general_bytes(hdev->ndev, atr_res->gbi, gb_len); - if (r < 0) + if (r < 0) { + kfree_skb(skb); return r; + } } info->dep_info.curr_nfc_dep_pni = 0; -- cgit v1.2.3-58-ga151 From 784688993ebac34dffe44a9f2fabbe126ebfd4db Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Thu, 28 May 2020 11:19:17 -0500 Subject: drivers/net/ibmvnic: Update VNIC protocol version reporting VNIC protocol version is reported in big-endian format, but it is not byteswapped before logging. Fix that, and remove version comparison as only one protocol version exists at this time. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 3de549c6c693..197dc5b2c090 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -4678,12 +4678,10 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, dev_err(dev, "Error %ld in VERSION_EXCHG_RSP\n", rc); break; } - dev_info(dev, "Partner protocol version is %d\n", - crq->version_exchange_rsp.version); - if (be16_to_cpu(crq->version_exchange_rsp.version) < - ibmvnic_version) - ibmvnic_version = + ibmvnic_version = be16_to_cpu(crq->version_exchange_rsp.version); + dev_info(dev, "Partner protocol version is %d\n", + ibmvnic_version); send_cap_queries(adapter); break; case QUERY_CAPABILITY_RSP: -- cgit v1.2.3-58-ga151 From 8692cefc433f282228fd44938dd4d26ed38254a2 Mon Sep 17 00:00:00 2001 From: Jia He Date: Sat, 30 May 2020 09:38:28 +0800 Subject: virtio_vsock: Fix race condition in virtio_transport_recv_pkt When client on the host tries to connect(SOCK_STREAM, O_NONBLOCK) to the server on the guest, there will be a panic on a ThunderX2 (armv8a server): [ 463.718844] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 463.718848] Mem abort info: [ 463.718849] ESR = 0x96000044 [ 463.718852] EC = 0x25: DABT (current EL), IL = 32 bits [ 463.718853] SET = 0, FnV = 0 [ 463.718854] EA = 0, S1PTW = 0 [ 463.718855] Data abort info: [ 463.718856] ISV = 0, ISS = 0x00000044 [ 463.718857] CM = 0, WnR = 1 [ 463.718859] user pgtable: 4k pages, 48-bit VAs, pgdp=0000008f6f6e9000 [ 463.718861] [0000000000000000] pgd=0000000000000000 [ 463.718866] Internal error: Oops: 96000044 [#1] SMP [...] [ 463.718977] CPU: 213 PID: 5040 Comm: vhost-5032 Tainted: G O 5.7.0-rc7+ #139 [ 463.718980] Hardware name: GIGABYTE R281-T91-00/MT91-FS1-00, BIOS F06 09/25/2018 [ 463.718982] pstate: 60400009 (nZCv daif +PAN -UAO) [ 463.718995] pc : virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.718999] lr : virtio_transport_recv_pkt+0x1fc/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719000] sp : ffff80002dbe3c40 [...] [ 463.719025] Call trace: [ 463.719030] virtio_transport_recv_pkt+0x4c8/0xd40 [vmw_vsock_virtio_transport_common] [ 463.719034] vhost_vsock_handle_tx_kick+0x360/0x408 [vhost_vsock] [ 463.719041] vhost_worker+0x100/0x1a0 [vhost] [ 463.719048] kthread+0x128/0x130 [ 463.719052] ret_from_fork+0x10/0x18 The race condition is as follows: Task1 Task2 ===== ===== __sock_release virtio_transport_recv_pkt __vsock_release vsock_find_bound_socket (found sk) lock_sock_nested vsock_remove_sock sock_orphan sk_set_socket(sk, NULL) sk->sk_shutdown = SHUTDOWN_MASK ... release_sock lock_sock virtio_transport_recv_connecting sk->sk_socket->state (panic!) The root cause is that vsock_find_bound_socket can't hold the lock_sock, so there is a small race window between vsock_find_bound_socket() and lock_sock(). If __vsock_release() is running in another task, sk->sk_socket will be set to NULL inadvertently. This fixes it by checking sk->sk_shutdown(suggested by Stefano) after lock_sock since sk->sk_shutdown is set to SHUTDOWN_MASK under the protection of lock_sock_nested. Signed-off-by: Jia He Reviewed-by: Stefano Garzarella Signed-off-by: David S. Miller --- net/vmw_vsock/virtio_transport_common.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 69efc891885f..0edda1edf988 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -1132,6 +1132,14 @@ void virtio_transport_recv_pkt(struct virtio_transport *t, lock_sock(sk); + /* Check if sk has been released before lock_sock */ + if (sk->sk_shutdown == SHUTDOWN_MASK) { + (void)virtio_transport_reset_no_sock(t, pkt); + release_sock(sk); + sock_put(sk); + goto free_pkt; + } + /* Update CID in case it has changed after a transport reset event */ vsk->local_addr.svm_cid = dst.svm_cid; -- cgit v1.2.3-58-ga151 From 1b49cd71b52403822731dc9f283185d1da355f97 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Sat, 30 May 2020 11:34:33 +0800 Subject: devinet: fix memleak in inetdev_init() When devinet_sysctl_register() failed, the memory allocated in neigh_parms_alloc() should be freed. Fixes: 20e61da7ffcf ("ipv4: fail early when creating netdev named all or default") Signed-off-by: Yang Yingliang Acked-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index c0dd561aa190..5267b6b191eb 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -276,6 +276,7 @@ static struct in_device *inetdev_init(struct net_device *dev) err = devinet_sysctl_register(in_dev); if (err) { in_dev->dead = 1; + neigh_parms_release(&arp_tbl, in_dev->arp_parms); in_dev_put(in_dev); in_dev = NULL; goto out; -- cgit v1.2.3-58-ga151 From 05aa69e5cba61d8900970a364825f854401694ec Mon Sep 17 00:00:00 2001 From: wenxu Date: Sat, 30 May 2020 13:54:51 +0800 Subject: net/sched: act_ct: add nat mangle action only for NAT-conntrack Currently add nat mangle action with comparing invert and orig tuple. It is better to check IPS_NAT_MASK flags first to avoid non necessary memcmp for non-NAT conntrack. Signed-off-by: wenxu Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sched/act_ct.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index 1a766393be62..20577355235a 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -199,6 +199,9 @@ static int tcf_ct_flow_table_add_action_nat(struct net *net, const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple; struct nf_conntrack_tuple target; + if (!(ct->status & IPS_NAT_MASK)) + return 0; + nf_ct_invert_tuple(&target, &ct->tuplehash[!dir].tuple); switch (tuple->src.l3num) { -- cgit v1.2.3-58-ga151 From 41be81a8d3d09acb9033799938306349328861f9 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 29 May 2020 17:43:29 +0200 Subject: mptcp: fix unblocking connect() Currently unblocking connect() on MPTCP sockets fails frequently. If mptcp_stream_connect() is invoked to complete a previously attempted unblocking connection, it will still try to create the first subflow via __mptcp_socket_create(). If the 3whs is completed and the 'can_ack' flag is already set, the latter will fail with -EINVAL. This change addresses the issue checking for pending connect and delegating the completion to the first subflow. Additionally do msk addresses and sk_state changes only when needed. Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index c8675d2eb5b9..8959a74f707d 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1712,6 +1712,14 @@ static int mptcp_stream_connect(struct socket *sock, struct sockaddr *uaddr, int err; lock_sock(sock->sk); + if (sock->state != SS_UNCONNECTED && msk->subflow) { + /* pending connection or invalid state, let existing subflow + * cope with that + */ + ssock = msk->subflow; + goto do_connect; + } + ssock = __mptcp_socket_create(msk, TCP_SYN_SENT); if (IS_ERR(ssock)) { err = PTR_ERR(ssock); @@ -1726,9 +1734,17 @@ static int mptcp_stream_connect(struct socket *sock, struct sockaddr *uaddr, mptcp_subflow_ctx(ssock->sk)->request_mptcp = 0; #endif +do_connect: err = ssock->ops->connect(ssock, uaddr, addr_len, flags); - inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk)); - mptcp_copy_inaddrs(sock->sk, ssock->sk); + sock->state = ssock->state; + + /* on successful connect, the msk state will be moved to established by + * subflow_finish_connect() + */ + if (!err || err == EINPROGRESS) + mptcp_copy_inaddrs(sock->sk, ssock->sk); + else + inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk)); unlock: release_sock(sock->sk); -- cgit v1.2.3-58-ga151 From 10f6d46c943d1ccd1d730d2e915226cbdeaad2d5 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 29 May 2020 17:43:30 +0200 Subject: mptcp: fix race between MP_JOIN and close If a MP_JOIN subflow completes the 3whs while another CPU is closing the master msk, we can hit the following race: CPU1 CPU2 close() mptcp_close subflow_syn_recv_sock mptcp_token_get_sock mptcp_finish_join inet_sk_state_load mptcp_token_destroy inet_sk_state_store(TCP_CLOSE) __mptcp_flush_join_list() mptcp_sock_graft list_add_tail sk_common_release sock_orphan() The MP_JOIN socket will be leaked. Additionally we can hit UaF for the msk 'struct socket' referenced via the 'conn' field. This change try to address the issue introducing some synchronization between the MP_JOIN 3whs and mptcp_close via the join_list spinlock. If we detect the msk is closing the MP_JOIN socket is closed, too. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 42 +++++++++++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 15 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 8959a74f707d..35bdfb4f3eae 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1266,8 +1266,12 @@ static void mptcp_close(struct sock *sk, long timeout) mptcp_token_destroy(msk->token); inet_sk_state_store(sk, TCP_CLOSE); - __mptcp_flush_join_list(msk); - + /* be sure to always acquire the join list lock, to sync vs + * mptcp_finish_join(). + */ + spin_lock_bh(&msk->join_list_lock); + list_splice_tail_init(&msk->join_list, &msk->conn_list); + spin_unlock_bh(&msk->join_list_lock); list_splice_init(&msk->conn_list, &conn_list); data_fin_tx_seq = msk->write_seq; @@ -1623,22 +1627,30 @@ bool mptcp_finish_join(struct sock *sk) if (!msk->pm.server_side) return true; - /* passive connection, attach to msk socket */ + if (!mptcp_pm_allow_new_subflow(msk)) + return false; + + /* active connections are already on conn_list, and we can't acquire + * msk lock here. + * use the join list lock as synchronization point and double-check + * msk status to avoid racing with mptcp_close() + */ + spin_lock_bh(&msk->join_list_lock); + ret = inet_sk_state_load(parent) == TCP_ESTABLISHED; + if (ret && !WARN_ON_ONCE(!list_empty(&subflow->node))) + list_add_tail(&subflow->node, &msk->join_list); + spin_unlock_bh(&msk->join_list_lock); + if (!ret) + return false; + + /* attach to msk socket only after we are sure he will deal with us + * at close time + */ parent_sock = READ_ONCE(parent->sk_socket); if (parent_sock && !sk->sk_socket) mptcp_sock_graft(sk, parent_sock); - - ret = mptcp_pm_allow_new_subflow(msk); - if (ret) { - subflow->map_seq = msk->ack_seq; - - /* active connections are already on conn_list */ - spin_lock_bh(&msk->join_list_lock); - if (!WARN_ON_ONCE(!list_empty(&subflow->node))) - list_add_tail(&subflow->node, &msk->join_list); - spin_unlock_bh(&msk->join_list_lock); - } - return ret; + subflow->map_seq = msk->ack_seq; + return true; } bool mptcp_sk_is_subflow(const struct sock *sk) -- cgit v1.2.3-58-ga151 From c5c79763fac115fe827ed6a18ed94fff2432f678 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 29 May 2020 17:43:31 +0200 Subject: mptcp: remove msk from the token container at destruction time. Currently we remote the msk from the token container only via mptcp_close(). The MPTCP master socket can be destroyed also via other paths (e.g. if not yet accepted, when shutting down the listener socket). When we hit the latter scenario, dangling msk references are left into the token container, leading to memory corruption and/or UaF. This change addresses the issue by moving the token removal into the msk destructor. Fixes: 79c0949e9a09 ("mptcp: Add key generation and token tree") Signed-off-by: Paolo Abeni Reviewed-by: Mat Martineau Signed-off-by: David S. Miller --- net/mptcp/protocol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 35bdfb4f3eae..34dd0e278a82 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -1263,7 +1263,6 @@ static void mptcp_close(struct sock *sk, long timeout) lock_sock(sk); - mptcp_token_destroy(msk->token); inet_sk_state_store(sk, TCP_CLOSE); /* be sure to always acquire the join list lock, to sync vs @@ -1461,6 +1460,7 @@ static void mptcp_destroy(struct sock *sk) { struct mptcp_sock *msk = mptcp_sk(sk); + mptcp_token_destroy(msk->token); if (msk->cached_ext) __skb_ext_put(msk->cached_ext); -- cgit v1.2.3-58-ga151 From c6e08d6251f342090a9b9abccbf26b19bcb54d17 Mon Sep 17 00:00:00 2001 From: Chris Lew Date: Thu, 28 May 2020 16:05:26 -0700 Subject: net: qrtr: Allocate workqueue before kernel_bind A null pointer dereference in qrtr_ns_data_ready() is seen if a client opens a qrtr socket before qrtr_ns_init() can bind to the control port. When the control port is bound, the ENETRESET error will be broadcasted and clients will close their sockets. This results in DEL_CLIENT packets being sent to the ns and qrtr_ns_data_ready() being called without the workqueue being allocated. Allocate the workqueue before setting sk_data_ready and binding to the control port. This ensures that the work and workqueue structs are allocated and initialized before qrtr_ns_data_ready can be called. Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Chris Lew Reviewed-by: Bjorn Andersson Reviewed-by: Manivannan Sadhasivam Signed-off-by: David S. Miller --- net/qrtr/ns.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/qrtr/ns.c b/net/qrtr/ns.c index e7d0fe3f4330..c5b3202a14ca 100644 --- a/net/qrtr/ns.c +++ b/net/qrtr/ns.c @@ -712,6 +712,10 @@ void qrtr_ns_init(void) goto err_sock; } + qrtr_ns.workqueue = alloc_workqueue("qrtr_ns_handler", WQ_UNBOUND, 1); + if (!qrtr_ns.workqueue) + goto err_sock; + qrtr_ns.sock->sk->sk_data_ready = qrtr_ns_data_ready; sq.sq_port = QRTR_PORT_CTRL; @@ -720,17 +724,13 @@ void qrtr_ns_init(void) ret = kernel_bind(qrtr_ns.sock, (struct sockaddr *)&sq, sizeof(sq)); if (ret < 0) { pr_err("failed to bind to socket\n"); - goto err_sock; + goto err_wq; } qrtr_ns.bcast_sq.sq_family = AF_QIPCRTR; qrtr_ns.bcast_sq.sq_node = QRTR_NODE_BCAST; qrtr_ns.bcast_sq.sq_port = QRTR_PORT_CTRL; - qrtr_ns.workqueue = alloc_workqueue("qrtr_ns_handler", WQ_UNBOUND, 1); - if (!qrtr_ns.workqueue) - goto err_sock; - ret = say_hello(&qrtr_ns.bcast_sq); if (ret < 0) goto err_wq; -- cgit v1.2.3-58-ga151 From 02c71b144c811bcdd865e0a1226d0407d11357e8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 May 2020 11:20:53 -0700 Subject: l2tp: do not use inet_hash()/inet_unhash() syzbot recently found a way to crash the kernel [1] Issue here is that inet_hash() & inet_unhash() are currently only meant to be used by TCP & DCCP, since only these protocols provide the needed hashinfo pointer. L2TP uses a single list (instead of a hash table) This old bug became an issue after commit 610236587600 ("bpf: Add new cgroup attach type to enable sock modifications") since after this commit, sk_common_release() can be called while the L2TP socket is still considered 'hashed'. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: sk_common_release+0xba/0x370 net/core/sock.c:3210 inet_create net/ipv4/af_inet.c:390 [inline] inet_create+0x966/0xe00 net/ipv4/af_inet.c:248 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x441e29 Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29 RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 23b6578228ce553e ]--- RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00 RSP: 0018:ffffc90001777d30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242 RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008 RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1 R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0 R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00 FS: 0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support") Signed-off-by: Eric Dumazet Cc: James Chapman Cc: Andrii Nakryiko Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com --- net/l2tp/l2tp_ip.c | 29 ++++++++++++++++++++++------- net/l2tp/l2tp_ip6.c | 30 ++++++++++++++++++++++-------- 2 files changed, 44 insertions(+), 15 deletions(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 0d7c887a2b75..955662a6dee7 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -209,15 +208,31 @@ discard: return 0; } -static int l2tp_ip_open(struct sock *sk) +static int l2tp_ip_hash(struct sock *sk) { - /* Prevent autobind. We don't have ports. */ - inet_sk(sk)->inet_num = IPPROTO_L2TP; + if (sk_unhashed(sk)) { + write_lock_bh(&l2tp_ip_lock); + sk_add_node(sk, &l2tp_ip_table); + write_unlock_bh(&l2tp_ip_lock); + } + return 0; +} +static void l2tp_ip_unhash(struct sock *sk) +{ + if (sk_unhashed(sk)) + return; write_lock_bh(&l2tp_ip_lock); - sk_add_node(sk, &l2tp_ip_table); + sk_del_node_init(sk); write_unlock_bh(&l2tp_ip_lock); +} + +static int l2tp_ip_open(struct sock *sk) +{ + /* Prevent autobind. We don't have ports. */ + inet_sk(sk)->inet_num = IPPROTO_L2TP; + l2tp_ip_hash(sk); return 0; } @@ -594,8 +609,8 @@ static struct proto l2tp_ip_prot = { .sendmsg = l2tp_ip_sendmsg, .recvmsg = l2tp_ip_recvmsg, .backlog_rcv = l2tp_ip_backlog_recv, - .hash = inet_hash, - .unhash = inet_unhash, + .hash = l2tp_ip_hash, + .unhash = l2tp_ip_unhash, .obj_size = sizeof(struct l2tp_ip_sock), #ifdef CONFIG_COMPAT .compat_setsockopt = compat_ip_setsockopt, diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index d148766f40d1..0fa694bd3f6a 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -20,8 +20,6 @@ #include #include #include -#include -#include #include #include #include @@ -222,15 +220,31 @@ discard: return 0; } -static int l2tp_ip6_open(struct sock *sk) +static int l2tp_ip6_hash(struct sock *sk) { - /* Prevent autobind. We don't have ports. */ - inet_sk(sk)->inet_num = IPPROTO_L2TP; + if (sk_unhashed(sk)) { + write_lock_bh(&l2tp_ip6_lock); + sk_add_node(sk, &l2tp_ip6_table); + write_unlock_bh(&l2tp_ip6_lock); + } + return 0; +} +static void l2tp_ip6_unhash(struct sock *sk) +{ + if (sk_unhashed(sk)) + return; write_lock_bh(&l2tp_ip6_lock); - sk_add_node(sk, &l2tp_ip6_table); + sk_del_node_init(sk); write_unlock_bh(&l2tp_ip6_lock); +} + +static int l2tp_ip6_open(struct sock *sk) +{ + /* Prevent autobind. We don't have ports. */ + inet_sk(sk)->inet_num = IPPROTO_L2TP; + l2tp_ip6_hash(sk); return 0; } @@ -728,8 +742,8 @@ static struct proto l2tp_ip6_prot = { .sendmsg = l2tp_ip6_sendmsg, .recvmsg = l2tp_ip6_recvmsg, .backlog_rcv = l2tp_ip6_backlog_recv, - .hash = inet6_hash, - .unhash = inet_unhash, + .hash = l2tp_ip6_hash, + .unhash = l2tp_ip6_unhash, .obj_size = sizeof(struct l2tp_ip6_sock), #ifdef CONFIG_COMPAT .compat_setsockopt = compat_ipv6_setsockopt, -- cgit v1.2.3-58-ga151 From d9a81a225277686eb629938986d97629ea102633 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 May 2020 11:32:25 -0700 Subject: l2tp: add sk_family checks to l2tp_validate_socket syzbot was able to trigger a crash after using an ISDN socket and fool l2tp. Fix this by making sure the UDP socket is of the proper family. BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018 CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x188/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511 kasan_report+0x33/0x50 mm/kasan/common.c:625 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline] genl_family_rcv_msg net/netlink/genetlink.c:718 [inline] genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x45ca29 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005 RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4 Allocated by task 3018: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x161/0x7a0 mm/slab.c:3665 kmalloc include/linux/slab.h:560 [inline] sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612 sk_alloc+0x36/0x1100 net/core/sock.c:1666 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline] mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796 __sock_create+0x3cb/0x730 net/socket.c:1428 sock_create net/socket.c:1479 [inline] __sys_socket+0xef/0x200 net/socket.c:1521 __do_sys_socket net/socket.c:1530 [inline] __se_sys_socket net/socket.c:1528 [inline] __x64_sys_socket+0x6f/0xb0 net/socket.c:1528 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 Freed by task 2484: save_stack+0x1b/0x40 mm/kasan/common.c:49 set_track mm/kasan/common.c:57 [inline] kasan_set_free_info mm/kasan/common.c:317 [inline] __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456 __cache_free mm/slab.c:3426 [inline] kfree+0x109/0x2b0 mm/slab.c:3757 kvfree+0x42/0x50 mm/util.c:603 __free_fdtable+0x2d/0x70 fs/file.c:31 put_files_struct fs/file.c:420 [inline] put_files_struct+0x248/0x2e0 fs/file.c:413 exit_files+0x7e/0xa0 fs/file.c:445 do_exit+0xb04/0x2dd0 kernel/exit.c:791 do_group_exit+0x125/0x340 kernel/exit.c:894 get_signal+0x47b/0x24e0 kernel/signal.c:2739 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305 entry_SYSCALL_64_after_hwframe+0x49/0xb3 The buggy address belongs to the object at ffff88808ed0c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1424 bytes inside of 2048-byte region [ffff88808ed0c000, ffff88808ed0c800) The buggy address belongs to the page: page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00 raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 6b9f34239b00 ("l2tp: fix races in tunnel creation") Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet Cc: James Chapman Cc: Guillaume Nault Reported-by: syzbot Acked-by: Guillaume Nault Signed-off-by: David S. Miller --- net/l2tp/l2tp_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index fcb53ed1c4fb..6d7ef78c88af 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1458,6 +1458,9 @@ static int l2tp_validate_socket(const struct sock *sk, const struct net *net, if (sk->sk_type != SOCK_DGRAM) return -EPROTONOSUPPORT; + if (sk->sk_family != PF_INET && sk->sk_family != PF_INET6) + return -EPROTONOSUPPORT; + if ((encap == L2TP_ENCAPTYPE_UDP && sk->sk_protocol != IPPROTO_UDP) || (encap == L2TP_ENCAPTYPE_IP && sk->sk_protocol != IPPROTO_L2TP)) return -EPROTONOSUPPORT; -- cgit v1.2.3-58-ga151 From bdc48fa11e46f867ea4d75fa59ee87a7f48be144 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 29 May 2020 16:12:21 -0700 Subject: checkpatch/coding-style: deprecate 80-column warning Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by: Joe Perches Signed-off-by: Linus Torvalds --- Documentation/process/coding-style.rst | 23 ++++++++++++++--------- scripts/checkpatch.pl | 14 +++++++++----- 2 files changed, 23 insertions(+), 14 deletions(-) diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index acb2f1b36350..17a8e584f15f 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -84,15 +84,20 @@ Get a decent editor and don't leave whitespace at the end of lines. Coding style is all about readability and maintainability using commonly available tools. -The limit on the length of lines is 80 columns and this is a strongly -preferred limit. - -Statements longer than 80 columns will be broken into sensible chunks, unless -exceeding 80 columns significantly increases readability and does not hide -information. Descendants are always substantially shorter than the parent and -are placed substantially to the right. The same applies to function headers -with a long argument list. However, never break user-visible strings such as -printk messages, because that breaks the ability to grep for them. +The preferred limit on the length of a single line is 80 columns. + +Statements longer than 80 columns should be broken into sensible chunks, +unless exceeding 80 columns significantly increases readability and does +not hide information. + +Descendants are always substantially shorter than the parent and are +are placed substantially to the right. A very commonly used style +is to align descendants to a function open parenthesis. + +These same rules are applied to function headers with a long argument list. + +However, never break user-visible strings such as printk messages because +that breaks the ability to grep for them. 3) Placing Braces and Spaces diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index eac40f0abd56..b83be177edf0 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -51,7 +51,7 @@ my %ignore_type = (); my @ignore = (); my $help = 0; my $configuration_file = ".checkpatch.conf"; -my $max_line_length = 80; +my $max_line_length = 100; my $ignore_perl_version = 0; my $minimum_perl_version = 5.10.0; my $min_conf_desc_length = 4; @@ -97,9 +97,11 @@ Options: --types TYPE(,TYPE2...) show only these comma separated message types --ignore TYPE(,TYPE2...) ignore various comma separated message types --show-types show the specific message type in the output - --max-line-length=n set the maximum line length, if exceeded, warn + --max-line-length=n set the maximum line length, (default $max_line_length) + if exceeded, warn on patches + requires --strict for use with --file --min-conf-desc-length=n set the min description length, if shorter, warn - --tab-size=n set the number of spaces for tab (default 8) + --tab-size=n set the number of spaces for tab (default $tabsize) --root=PATH PATH to the kernel tree root --no-summary suppress the per-file summary --mailback only produce a report in case of warnings/errors @@ -3240,8 +3242,10 @@ sub process { if ($msg_type ne "" && (show_type("LONG_LINE") || show_type($msg_type))) { - WARN($msg_type, - "line over $max_line_length characters\n" . $herecurr); + my $msg_level = \&WARN; + $msg_level = \&CHK if ($file); + &{$msg_level}($msg_type, + "line length of $length exceeds $max_line_length columns\n" . $herecurr); } } -- cgit v1.2.3-58-ga151