From 60cd4dba9b75da175c79d0dc6d7beb8701307ff8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 15 Jun 2012 16:38:23 -0600 Subject: sparc/PCI: remove unused pcibios_assign_resource() definition pcibios_assign_resource() isn't used anywhere; remove it. Signed-off-by: Bjorn Helgaas --- arch/sparc/kernel/pcic.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index ded3f6090c3f..46ba84998f16 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -884,11 +884,6 @@ void __init sun4m_pci_init_IRQ(void) sparc_config.load_profile_irq = pcic_load_profile_irq; } -int pcibios_assign_resource(struct pci_dev *pdev, int resource) -{ - return -ENXIO; -} - /* * This probably belongs here rather than ioport.c because * we do not want this crud linked into SBus kernels. -- cgit v1.2.3-58-ga151 From 8356aad43005ecb771a67efb4182dc038b4187e3 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Fri, 15 Jun 2012 21:15:49 +0800 Subject: PCI: cleanup assign_requested_resources_sorted() kernel-doc warning Warning(drivers/pci/setup-bus.c:277): No description found for parameter 'fail_head' Warning(drivers/pci/setup-bus.c:277): Excess function parameter 'failed_list' description in 'assign_requested_resources_sorted' Signed-off-by: Wanpeng Li Signed-off-by: Bjorn Helgaas --- drivers/pci/setup-bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 8fa2d4be88de..9165d25cc792 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -265,7 +265,7 @@ out: * assign_requested_resources_sorted() - satisfy resource requests * * @head : head of the list tracking requests for resources - * @failed_list : head of the list tracking requests that could + * @fail_head : head of the list tracking requests that could * not be allocated * * Satisfy resource requests of each element in the list. Add -- cgit v1.2.3-58-ga151 From d6d88c832eaea6c6947ddf7b664601930a9f8a14 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 19 Jun 2012 06:54:49 -0600 Subject: PCI: use __weak consistently Use "__weak" instead of the gcc-specific "__attribute__ ((weak))" Signed-off-by: Bjorn Helgaas --- drivers/pci/pci-sysfs.c | 2 +- drivers/pci/pci.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 86c63fe45d11..a0b435f20bd6 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -1112,7 +1112,7 @@ static struct bin_attribute pcie_config_attr = { .write = pci_write_config, }; -int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev) +int __weak pcibios_add_platform_entries(struct pci_dev *dev) { return 0; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 447e83472c01..8f4a5ea543fc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1349,7 +1349,7 @@ void pcim_pin_device(struct pci_dev *pdev) * is the default implementation. Architecture implementations can * override this. */ -void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} +void __weak pcibios_disable_device (struct pci_dev *dev) {} static void do_pci_disable_device(struct pci_dev *dev) { @@ -1413,8 +1413,8 @@ pci_disable_device(struct pci_dev *dev) * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ -int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, - enum pcie_reset_state state) +int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state) { return -EINVAL; } @@ -3851,7 +3851,7 @@ static void __devinit pci_no_domains(void) * greater than 0xff). This is the default implementation. Architecture * implementations can override this. */ -int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev) +int __weak pci_ext_cfg_avail(struct pci_dev *dev) { return 1; } -- cgit v1.2.3-58-ga151 From 8291550f8479fde2cee571d1b367e6918819f189 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 19 Jun 2012 07:35:34 -0600 Subject: PCI: fix upstream P2P bridge checks when enabling OBFF and LTR pci_enable_obff() and pci_enable_ltr() incorrectly check "dev->bus" instead of "dev->bus->self" to determine whether the upstream device is a P2P bridge or a host bridge. For devices on the root bus, the upstream device is a host bridge, "dev->bus != NULL" and "dev->bus->self == NULL", and we panic with a null pointer dereference. These functions should previously have panicked when called on devices supporting OBFF or LTR, so they should be regarded as untested. Found by Coverity (CID 143038 and CID 143039). Signed-off-by: Bjorn Helgaas --- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8f4a5ea543fc..b9e93cf1eb40 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2108,7 +2108,7 @@ int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type) return -ENOTSUPP; /* no OBFF support at all */ /* Make sure the topology supports OBFF as well */ - if (dev->bus) { + if (dev->bus->self) { ret = pci_enable_obff(dev->bus->self, type); if (ret) return ret; @@ -2215,7 +2215,7 @@ int pci_enable_ltr(struct pci_dev *dev) return -EINVAL; /* Enable upstream ports first */ - if (dev->bus) { + if (dev->bus->self) { ret = pci_enable_ltr(dev->bus->self); if (ret) return ret; -- cgit v1.2.3-58-ga151 From 8f38eaca55d0fab7499b33adb1dec33e16de5abb Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 19 Jun 2012 07:45:44 -0600 Subject: PCI: fix P2P bridge I/O port window sign extension On P2P bridges with 32-bit I/O decoding, we incorrectly sign-extended windows starting at 0x80000000 or above. In "base |= (io_base_hi << 16)", "io_base_hi" is promoted to a signed int before being extended to an unsigned long. This would cause a window starting at I/O address 0x80000000 to be treated as though it started at 0xffffffff80008000 instead, which should cause "no compatible bridge window" errors when we enumerate devices using that I/O space. The mmio and mmio_pref casts are not strictly necessary, but without them, correctness depends on the types of the PCI_MEMORY_RANGE_MASK and PCI_PREF_RANGE_MASK constants, which are not obvious from reading the local code. Found by Coverity (CID 138747 and CID 138748). Signed-off-by: Bjorn Helgaas --- drivers/pci/probe.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 658ac977cb56..a7a504fc82b9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -281,10 +281,11 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child) if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { u16 io_base_hi, io_limit_hi; + pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi); pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi); - base |= (io_base_hi << 16); - limit |= (io_limit_hi << 16); + base |= ((unsigned long) io_base_hi << 16); + limit |= ((unsigned long) io_limit_hi << 16); } if (base && base <= limit) { @@ -312,8 +313,8 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child) res = child->resource[1]; pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); - base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; - limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; + base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; + limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; if (base && base <= limit) { res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; region.start = base; @@ -334,11 +335,12 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) res = child->resource[2]; pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo); - base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16; - limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; + base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16; + limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { u32 mem_base_hi, mem_limit_hi; + pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi); pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi); @@ -349,8 +351,8 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child) */ if (mem_base_hi <= mem_limit_hi) { #if BITS_PER_LONG == 64 - base |= ((long) mem_base_hi) << 32; - limit |= ((long) mem_limit_hi) << 32; + base |= ((unsigned long) mem_base_hi) << 32; + limit |= ((unsigned long) mem_limit_hi) << 32; #else if (mem_base_hi || mem_limit_hi) { dev_err(&dev->dev, "can't handle 64-bit " -- cgit v1.2.3-58-ga151 From 67454b6602c3519d15193630e6765a5f02f39160 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 20 Jun 2012 16:11:45 -0600 Subject: PCI: shpchp: remove dead code "slots_not_empty" is initialized to zero and can't be set again before reaching this point, so this return statement is dead. Remove it. Found by Coverity (CID 114324). Signed-off-by: Bjorn Helgaas --- drivers/pci/hotplug/shpchp_ctrl.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index b00b09bdd38a..f9b5a52e4115 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -262,9 +262,6 @@ static int board_added(struct slot *p_slot) } if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) { - if (slots_not_empty) - return WRONG_BUS_FREQUENCY; - if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { ctrl_err(ctrl, "%s: Issue of set bus speed mode command" " failed\n", __func__); -- cgit v1.2.3-58-ga151 From dfb117b3e50c52c7b3416db4a4569224b8db80bb Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 20 Jun 2012 16:18:29 -0600 Subject: PCI: acpiphp: check whether _ADR evaluation succeeded Check whether we evaluated _ADR successfully. Previously we ignored failure, so we would have used garbage data from the stack as the device and function number. We return AE_OK so that we ignore only this slot and continue looking for other slots. Found by Coverity (CID 113981). Signed-off-by: Bjorn Helgaas --- drivers/pci/hotplug/acpiphp_glue.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 806c44fa645a..09bf37721842 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -132,6 +132,15 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; + status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr); + if (ACPI_FAILURE(status)) { + warn("can't evaluate _ADR (%#x)\n", status); + return AE_OK; + } + + device = (adr >> 16) & 0xffff; + function = adr & 0xffff; + pdev = pbus->self; if (pdev && pci_is_pcie(pdev)) { tmp = acpi_find_root_bridge_handle(pdev); @@ -144,10 +153,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) } } - acpi_evaluate_integer(handle, "_ADR", NULL, &adr); - device = (adr >> 16) & 0xffff; - function = adr & 0xffff; - newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL); if (!newfunc) return AE_NO_MEMORY; -- cgit v1.2.3-58-ga151 From 809a3bf9f34cb6d0c0383b31b3495fa1ed3508a6 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 20 Jun 2012 16:41:16 -0600 Subject: PCI: remove useless pcix_set_mmrbc() dev->bus check For a valid pci_dev, dev->bus != NULL always, so remove this unnecessary test. Found by Coverity (CID 101680). Signed-off-by: Bjorn Helgaas --- drivers/pci/pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index b9e93cf1eb40..7f1310e58534 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3395,8 +3395,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc) o = (cmd & PCI_X_CMD_MAX_READ) >> 2; if (o != v) { - if (v > o && dev->bus && - (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC)) + if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC)) return -EIO; cmd &= ~PCI_X_CMD_MAX_READ; -- cgit v1.2.3-58-ga151