| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"An unfortunately larger set of fixes, but a large portion is
selftests:
- Fix the missing clusterid initializaiton for x2apic cluster
management which caused boot failures due to IPIs being sent to the
wrong cluster
- Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat
task
- Wrap access to __supported_pte_mask in __startup_64() where clang
compile fails due to a non PC relative access being generated.
- Two fixes for 5 level paging fallout in the decompressor:
- Handle GOT correctly for paging_prepare() and
cleanup_trampoline()
- Fix the page table handling in cleanup_trampoline() to avoid
page table corruption.
- Stop special casing protection key 0 as this is inconsistent with
the manpage and also inconsistent with the allocation map handling.
- Override the protection key wen moving away from PROT_EXEC to
prevent inaccessible memory.
- Fix and update the protection key selftests to address breakage and
to cover the above issue
- Add a MOV SS self test"
[ Part of the x86 fixes were in the earlier core pull due to dependencies ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm: Drop TS_COMPAT on 64-bit exec() syscall
x86/apic/x2apic: Initialize cluster ID properly
x86/boot/compressed/64: Fix moving page table out of trampoline memory
x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
x86/pkeys: Do not special case protection key 0
x86/pkeys/selftests: Add a test for pkey 0
x86/pkeys/selftests: Save off 'prot' for allocations
x86/pkeys/selftests: Fix pointer math
x86/pkeys: Override pkey when moving away from PROT_EXEC
x86/pkeys/selftests: Fix pkey exhaustion test off-by-one
x86/pkeys/selftests: Add PROT_EXEC test
x86/pkeys/selftests: Factor out "instruction page"
x86/pkeys/selftests: Allow faults on unknown keys
x86/pkeys/selftests: Avoid printf-in-signal deadlocks
x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal
x86/pkeys/selftests: Stop using assert()
x86/pkeys/selftests: Give better unexpected fault error messages
x86/selftests: Add mov_to_ss test
x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI
x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI
...
|
|
Add a test which shows a race in the multi-order iteration code. This
test reliably hits the race in under a second on my machine, and is the
result of a real bug report against kernel a production v4.15 based
kernel (4.15.6-300.fc27.x86_64). With a real kernel this issue is hit
when using order 9 PMD DAX radix tree entries.
The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree. Remember that an order 2
entry looks like this:
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'
When we delete 'entry' from the tree, we call :
radix_tree_delete()
radix_tree_delete_item()
__radix_tree_delete()
replace_slot()
replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL. This means that for a
brief period of time we end up with one or more of the siblings removed,
so:
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection. This is a common case in
mm/filemap.c.
The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:
V preceding slot
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
^ current slot
This lets you find the first sibling, and you skip them all in order.
But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:
V preceding slot
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
^ current slot
This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers. This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.
In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.
In the radix tree test suite this will be caught by the address
sanitizer:
==27063==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x60c0008ae400 at pc 0x00000040ce4f bp 0x7fa89b8fcad0 sp 0x7fa89b8fcac0
READ of size 8 at 0x60c0008ae400 thread T3
#0 0x40ce4e in __radix_tree_next_slot /home/rzwisler/project/linux/tools/testing/radix-tree/radix-tree.c:1660
#1 0x4022cc in radix_tree_next_slot linux/../../../../include/linux/radix-tree.h:567
#2 0x4022cc in iterator_func /home/rzwisler/project/linux/tools/testing/radix-tree/multiorder.c:655
#3 0x7fa8a088d50a in start_thread (/lib64/libpthread.so.0+0x750a)
#4 0x7fa8a03bd16e in clone (/lib64/libc.so.6+0xf516e)
Link: http://lkml.kernel.org/r/20180503192430.7582-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the lifetime of "struct item" entries in the radix tree are
not controlled by RCU, but are instead deleted inline as they are
removed from the tree.
In the following patches we add a test which has threads iterating over
items pulled from the tree and verifying them in an
rcu_read_lock()/rcu_read_unlock() section. This means that though an
item has been removed from the tree it could still be being worked on by
other threads until the RCU grace period expires. So, we need to
actually free the "struct item" structures at the end of the grace
period, just as we do with "struct radix_tree_node" items.
Link: http://lkml.kernel.org/r/20180503192430.7582-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit c6ce3e2fe3da ("radix tree test suite: Add config option for map
shift") introduced a phony makefile target called 'mapshift' that ends
up generating the file generated/map-shift.h. This phony target was
then added as a dependency of the top level 'targets' build target,
which is what is run when you go to tools/testing/radix-tree and just
type 'make'.
Unfortunately, this phony target doesn't actually work as a dependency,
so you end up getting:
$ make
make: *** No rule to make target 'generated/map-shift.h', needed by 'main.o'. Stop.
make: *** Waiting for unfinished jobs....
Fix this by making the file generated/map-shift.h our real makefile
target, and add this a dependency of the top level build target.
Link: http://lkml.kernel.org/r/20180503192430.7582-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
|
|
Protection key 0 is the default key for all memory and will
not normally come back from pkey_alloc(). But, you might
still want pass it to mprotect_pkey().
This check ensures that you can use pkey 0.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171356.9E40B254@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This makes it possible to to tell what 'prot' a given allocation
is supposed to have. That way, if we want to change just the
pkey, we know what 'prot' to pass to mprotect_pkey().
Also, keep a record of the most recent allocation so the tests
can easily find it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171354.AA23E228@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We dump out the entire area of the siginfo where the si_pkey_ptr is
supposed to be. But, we do some math on the poitner, which is a u32.
We intended to do byte math, not u32 math on the pointer.
Cast it over to a u8* so it works.
Also, move this block of code to below th si_code check. It doesn't
hurt anything, but the si_pkey field is gibberish for other signal
types.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171352.9BE09819@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In our "exhaust all pkeys" test, we make sure that there
is the expected number available. Turns out that the
test did not cover the execute-only key, but discussed
it anyway. It did *not* discuss the test-allocated
key.
Now that we have a test for the mprotect(PROT_EXEC) case,
this off-by-one issue showed itself. Correct the off-by-
one and add the explanation for the case we missed.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171350.E1656B95@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Under the covers, implement executable-only memory with
protection keys when userspace calls mprotect(PROT_EXEC).
But, we did not have a selftest for that. Now we do.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171348.9EEE4BEF@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We currently have an execute-only test, but it is for
the explicit mprotect_pkey() interface. We will soon
add a test for the implicit mprotect(PROT_EXEC)
enterface. We need this code in both tests.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171347.C64AB733@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The exec-only pkey is allocated inside the kernel and userspace
is not told what it is. So, allow PK faults to occur that have
an unknown key.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171345.7FC7DA00@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
printf() and friends are unusable in signal handlers. They deadlock.
The pkey selftest does not do any normal printing in signal handlers,
only extra debugging. So, just print the format string so we get
*some* output when debugging.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171344.C53FD2F3@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There is some noisy debug code at the end of the signal handler. It was
disabled by an early, unconditional "return". However, that return also
hid a dprint_in_signal=0, which kept dprint_in_signal=1 and effectively
locked us into permanent dprint_in_signal=1 behavior.
Remove the return and the dead code, fixing dprint_in_signal.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171342.846B9B2E@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If we use assert(), the program "crashes". That can be scary to users,
so stop doing it. Just exit with a >0 exit code instead.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171340.E63EF7DA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
do_not_expect_pk_fault() is a helper that we call when we do not expect
a PK fault to have occurred. But, it is a function, which means that
it obscures the line numbers from pkey_assert(). It also gives no
details.
Replace it with an implementation that gives nice line numbers and
also lets callers pass in a more descriptive message about what
happened that caused the unexpected fault.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171338.55D13B64@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This exercises a nasty corner case of the x86 ISA.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/67e08b69817171da8026e0eb3af0214b06b4d74f.1525800455.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix this warning:
mpx-mini-test.c:422:0: warning: "SEGV_BNDERR" redefined
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: dave.hansen@intel.com
Cc: linux-mm@kvack.org
Cc: linuxram@us.ibm.com
Cc: mpe@ellerman.id.au
Cc: shakeelb@google.com
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180514085908.GA12798@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
pkeys ABI
Ubuntu 18.04 started exporting pkeys details in header files, resulting
in build failures and warnings in the pkeys self-tests:
protection_keys.c:232:0: warning: "SEGV_BNDERR" redefined
protection_keys.c:387:5: error: conflicting types for ‘pkey_get’
protection_keys.c:409:5: error: conflicting types for ‘pkey_set’
...
Fix these namespace conflicts and double definitions, plus also
clean up the ABI definitions to make it all a bit more readable ...
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: dave.hansen@intel.com
Cc: linux-mm@kvack.org
Cc: linuxram@us.ibm.com
Cc: mpe@ellerman.id.au
Cc: shakeelb@google.com
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180514085623.GB7094@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Right now, skipped tests are returning a failure exit code if /dev/kvm does
not exists. Consistently return a zero status code so that various scripts
over the interwebs do not complain. Also return a zero status code if
the KVM_CAP_SYNC_REGS capability is not present, and hardcode in the
test the register kinds that are covered (rather than just using whatever
value of KVM_SYNC_X86_VALID_FIELDS is provided by the kernel headers).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
- correct a typo in the value of 'matchPattern' of test 282d, potentially
causing false negative
- allow errors when 'teardown' executes '$TC action flush action bpf' in
test 282d, to fix false positive when it is run with act_bpf unloaded
- correct the value of 'matchPattern' in test e939, causing false positive
in case the BPF JIT is enabled
Fixes: 440ea4ae1828 ("tc-testing: add selftests for 'bpf' action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a script file that isn't generated uses the variable
TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
performed the script file gets removed and git shows the file as
deleted. For script files that isn't generated TEST_PROGS_EXTENDED
should be used.
Fixes: 9faedd643fd9 ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This Kselftest update for 4.17-rc4 consists of a fix for a syntax
error in the script that runs selftests. Mathieu Desnoyers found this
bug in the script on systems running GNU Make 3.8 or older"
* tag 'linux-kselftest-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix lib.mk run_tests target shell script
|
|
Pull networking fixes from David Miller:
1) Various sockmap fixes from John Fastabend (pinned map handling,
blocking in recvmsg, double page put, error handling during redirect
failures, etc.)
2) Fix dead code handling in x86-64 JIT, from Gianluca Borello.
3) Missing device put in RDS IB code, from Dag Moxnes.
4) Don't process fast open during repair mode in TCP< from Yuchung
Cheng.
5) Move address/port comparison fixes in SCTP, from Xin Long.
6) Handle add a bond slave's master into a bridge properly, from
Hangbin Liu.
7) IPv6 multipath code can operate on unitialized memory due to an
assumption that the icmp header is in the linear SKB area. Fix from
Eric Dumazet.
8) Don't invoke do_tcp_sendpages() recursively via TLS, from Dave
Watson.
9) Fix memory leaks in x86-64 JIT, from Daniel Borkmann.
10) RDS leaks kernel memory to userspace, from Eric Dumazet.
11) DCCP can invoke a tasklet on a freed socket, take a refcount. Also
from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits)
dccp: fix tasklet usage
smc: fix sendpage() call
net/smc: handle unregistered buffers
net/smc: call consolidation
qed: fix spelling mistake: "offloded" -> "offloaded"
net/mlx5e: fix spelling mistake: "loobpack" -> "loopback"
tcp: restore autocorking
rds: do not leak kernel memory to user land
qmi_wwan: do not steal interfaces from class drivers
ipv4: fix fnhe usage by non-cached routes
bpf: sockmap, fix error handling in redirect failures
bpf: sockmap, zero sg_size on error when buffer is released
bpf: sockmap, fix scatterlist update on error path in send with apply
net_sched: fq: take care of throttled flows before reuse
ipv6: Revert "ipv6: Allow non-gateway ECMP for IPv6"
bpf, x64: fix memleak when not converging on calls
bpf, x64: fix memleak when not converging after image
net/smc: restrict non-blocking connect finish
8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
sctp: fix the issue that the cookie-ack with auth can't get processed
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Several BPF sockmap fixes mostly related to bugs in error path
handling, that is, a bug in updating the scatterlist length /
offset accounting, a missing sk_mem_uncharge() in redirect
error handling, and a bug where the outstanding bytes counter
sg_size was not zeroed, from John.
2) Fix two memory leaks in the x86-64 BPF JIT, one in an error
path where we still don't converge after image was allocated
and another one where BPF calls are used and JIT passes don't
converge, from Daniel.
3) Minor fix in BPF selftests where in test_stacktrace_build_id()
we drop useless args in urandom_read and we need to add a missing
newline in a CHECK() error message, from Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
1. remove useless parameter list to ./urandom_read
2. add missing "\n" to the end of an error message
Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 pti fixes from Thomas Gleixner:
"A set of updates for the x86/pti related code:
- Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the
int$80 entry code removed that quite some time ago. Make it correct
again.
- A set of fixes for the Global Bit work which went into 4.17 and
caused a bunch of interesting regressions:
- Triggering a BUG in the page attribute code due to a missing
check for early boot stage
- Warnings in the page attribute code about holes in the kernel
text mapping which are caused by the freeing of the init code.
Handle such holes gracefully.
- Reduce the amount of kernel memory which is set global to the
actual text and do not incidentally overlap with data.
- Disable the global bit when RANDSTRUCT is enabled as it
partially defeats the hardening.
- Make the page protection setup correct for vma->page_prot
population again. The adjustment of the protections fell through
the crack during the Global bit rework and triggers warnings on
machines which do not support certain features, e.g. NX"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64/compat: Preserve r8-r11 in int $0x80
x86/pti: Filter at vma->vm_page_prot population
x86/pti: Disallow global kernel text with RANDSTRUCT
x86/pti: Reduce amount of kernel text allowed to be Global
x86/pti: Fix boot warning from Global-bit setting
x86/pti: Fix boot problems from Global-bit setting
|
|
Within run_tests target, the whole script needs to be executed within
the same shell and not as separate subshells, so the initial test_num
variable set to 0 is still present when executing "test_num=`echo
$$test_num+1 | bc`;".
Demonstration of the issue (make run_tests):
TAP version 13
(standard_in) 1: syntax error
selftests: basic_test
========================================
ok 1.. selftests: basic_test [PASS]
(standard_in) 1: syntax error
selftests: basic_percpu_ops_test
========================================
ok 1.. selftests: basic_percpu_ops_test [PASS]
(standard_in) 1: syntax error
selftests: param_test
========================================
ok 1.. selftests: param_test [PASS]
With fix applied:
TAP version 13
selftests: basic_test
========================================
ok 1..1 selftests: basic_test [PASS]
selftests: basic_percpu_ops_test
========================================
ok 1..2 selftests: basic_percpu_ops_test [PASS]
selftests: param_test
========================================
ok 1..3 selftests: param_test [PASS]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 1f87c7c15d7 ("selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format")
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: linux-kselftest@vger.kernel.org
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Script in_netns.sh is a utility function and not its own test so it
shouldn't be part of the TEST_PROGS. The in_netns.sh get used by
run_afpackettests.
To install in_netns.sh without being added to the main run_kselftest.sh
script use the TEST_GEN_PROGS_EXTENDED variable.
Fixes: 5ff9c1a3dd92 ("selftests: net: add in_netns.sh to TEST_PROGS")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg Kroah-Hartman:
"Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce
the number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: some documentation fixes
selftests:firmware: fixes a call to a wrong function name
kobject: don't use WARN for registration failures
firmware: Fix firmware documentation for recent file renames
test_firmware: fix setting old custom fw path back on exit, second try
test_firmware: Install all scripts
drivers: change struct device_driver::coredump() return type to void
|
|
32-bit user code that uses int $80 doesn't care about r8-r11. There is,
however, some 64-bit user code that intentionally uses int $0x80 to invoke
32-bit system calls. From what I've seen, basically all such code assumes
that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I
doubt that there's any code that depends on int $0x80 zeroing r8-r11,
change the kernel to preserve them.
I suspect that very little user code is broken by the old clobber, since
r8-r11 are only rarely allocated by gcc, and they're clobbered by function
calls, so they only way we'd see a problem is if the same function that
invokes int $0x80 also spills something important to one of these
registers.
The current behavior seems to date back to the historical commit
"[PATCH] x86-64 merge for 2.6.4". Before that, all regs were
preserved. I can't find any explanation of why this change was made.
Update the test_syscall_vdso_32 testcase as well to verify the new
behavior, and it strengthens the test to make sure that the kernel doesn't
accidentally permute r8..r15.
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lkml.kernel.org/r/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add workqueue forward declaration (for new work, but a nice clean up)
- seftest fixes for the new histogram code
- Print output fix for hwlat tracer
- Fix missing system call events - due to change in x86 syscall naming
- Fix kprobe address being used by perf being hashed
* tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix missing tab for hwlat_detector print format
selftests: ftrace: Add a testcase for multiple actions on trigger
selftests: ftrace: Fix trigger extended error testcase
kprobes: Fix random address output of blacklist file
tracing: Fix kernel crash while using empty filter with perf
tracing/x86: Update syscall trace events to handle new prefixed syscall func names
tracing: Add missing forward declaration
|
|
This is a patch to the tools/testing/selftests/firmware/fw_run_tests.sh
file which fixes a bug which calls to a wrong function name,which in turn
blocks the execution of certain tests.
Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a testcase for multiple actions with different
parameters on an event trigger, which has been fixed
by commit 192c283e93bd ("tracing: Add action comparisons
when testing matching hist triggers").
Link: http://lkml.kernel.org/r/152292055227.15769.6327959816123227152.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Previous testcase redirects echo-out into /dev/null
using "&>" as below
echo "trigger-command" >> trigger &> /dev/null
But this means redirecting both stdout and stderr into
/dev/null because it is same as below
echo "trigger-command" >> trigger > /dev/null 2>&1
So ">> trigger" redirects stdout to trigger file, but
next "> /dev/null" redirects stdout to /dev/null again
and the last "2>/&1" redirects stderr to stdout (/dev/null)
This fixes it by "2> /dev/null". And also, since it
must fail, add "!" to echo command.
Link: http://lkml.kernel.org/r/152292052250.15769.12565292689264162435.stgit@devbox
Fixes: f06eec4d0f2c ("selftests: ftrace: Add inter-event hist triggers testcases")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull networking fixes from David Miller:
1) Fix rtnl deadlock in ipvs, from Julian Anastasov.
2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls,
bad MAC address update sequence, request side races on command IO
timeouts).
3) Handle seq_file overflow properly in l2tp, from Guillaume Nault.
4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk.
5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from
Alexander Aring.
6) Fix out of bounds access in tcp md5 option parser, from Jann Horn.
7) Missing netlink attribute policies in rtm_ipv6_policy table, from
Eric Dumazet.
8) Missing socket address length checks in l2tp and pppoe connect, from
Guillaume Nault.
9) Fix netconsole over team and bonding, from Xin Long.
10) Fix race with AF_PACKET socket state bitfields, from Willem de
Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
ice: Fix insufficient memory issue in ice_aq_manage_mac_read
sfc: ARFS filter IDs
net: ethtool: Add missing kernel doc for FEC parameters
packet: fix bitfield update race
ice: Do not check INTEVENT bit for OICR interrupts
ice: Fix incorrect comment for action type
ice: Fix initialization for num_nodes_added
igb: Fix the transmission mode of queue 0 for Qav mode
ixgbevf: ensure xdp_ring resources are free'd on error exit
team: fix netconsole setup over team
amd-xgbe: Only use the SFP supported transceiver signals
amd-xgbe: Improve KR auto-negotiation and training
amd-xgbe: Add pre/post auto-negotiation phy hooks
pppoe: check sockaddr length in pppoe_connect()
l2tp: check sockaddr length in pppol2tp_connect()
net: phy: marvell: clear wol event before setting it
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
tcp: don't read out-of-bounds opsize
ibmvnic: Clean actual number of RX or TX pools
...
|
|
Commit 65c79230576 tried to clear the custom firmware path on exit by
writing a single space to the firmware_class.path parameter. This
doesn't work because nothing strips this space from the value stored
and fw_get_filesystem_firmware() only ignores zero-length paths.
Instead, write a null byte.
Fixes: 0a8adf58475 ("test: add firmware_class loader test")
Fixes: 65c79230576 ("test_firmware: fix setting old custom fw path back on exit")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
List all the scripts invoked by fw_run_tests.sh, so that
"make TARGETS=firmware install" keeps working.
Fixes: 29a1c00ce1df8 ("test_firmware: add simple firmware firmware test ...")
Fixes: b3cf21fae1fe0 ("test_firmware: test three firmware kernel configs ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when
one task is detaching a BPF prog via perf_event_detach_bpf_prog()
and another one dumping through bpf_prog_array_copy_info(). For
the latter we move the copy_to_user() out of the bpf_event_mutex
lock to fix it, from Yonghong.
2) Fix test_sock and test_sock_addr.sh failures. The former was
hitting rlimit issues and the latter required ping to specify
the address family, from Yonghong.
3) Remove a dead check in sockmap's sock_map_alloc(), from Jann.
4) Add generated files to BPF kselftests gitignore that were previously
missed, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A regression fix, new unit test infrastructure and a build fix:
- Regression fix addressing support for the new NVDIMM label storage
area access commands (_LSI, _LSR, and _LSW).
The Intel specific version of these commands communicated the
"Device Locked" status on the label-storage-information command.
However, these new commands (standardized in ACPI 6.2) communicate
the "Device Locked" status on the label-storage-read command, and
the driver was missing the indication.
Reading from locked persistent memory is similar to reading
unmapped PCI memory space, returns all 1's.
- Unit test infrastructure is added to regression test the "Device
Locked" detection failure.
- A build fix is included to allow the "of_pmem" driver to be built
as a module and translate an Open Firmware described device to its
local numa node"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: Add backup maintainers for libnvdimm and DAX
device-dax: allow MAP_SYNC to succeed
Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error"
libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()
tools/testing/nvdimm: enable labels for nfit_test.1 dimms
tools/testing/nvdimm: fix missing newline in nfit_test_dimm 'handle' attribute
tools/testing/nvdimm: support nfit_test_dimm attributes under nfit_test.1
tools/testing/nvdimm: allow custom error code injection
libnvdimm, dimm: handle EACCES failures from label reads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A fix from Michael Ellerman to not run dnotify_test by default to
prevent Kselftest running forever"
* tag 'linux-kselftest-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/filesystems: Don't run dnotify_test by default
|
|
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
|
|
The bpf selftests test_sock and test_sock_addr.sh failed
in my test machine. The failure looks like:
$ ./test_sock
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
Test case: bind4 load with invalid access: mark .. [PASS]
Test case: bind6 load with invalid access: src_ip4 .. [PASS]
Test case: sock_create load with invalid access: src_port .. [PASS]
Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL]
Test case: sock_create load w/ expected_attach_type .. [FAIL]
Test case: attach type mismatch bind4 vs bind6 .. [FAIL]
...
Summary: 4 PASSED, 12 FAILED
$ ./test_sock_addr.sh
Wait for testing IPv4/IPv6 to become available .....
ERROR: Timeout waiting for test IP to become available.
In test_sock, bpf program loads failed due to hitting memlock limits.
In test_sock_addr.sh, my test machine is a ipv6 only test box and using
"ping" without specifying address family for an ipv6 address does not work.
This patch fixed the issue by including header bpf_rlimit.h in test_sock.c
and test_sock_addr.c, and specifying address family for ping command.
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
In commit ce290a19609d ("selftests: add devpts selftests"), the
filesystems directory was added to the top-level selftests Makefile.
That had the effect of causing the existing dnotify_test in the
filesystems directory to now be run as part of the default selftests
test-run. Unfortunately dnotify_test is actually an infinite loop.
Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says
that it's a generated file (ie. built) but should not be run as part
of the default test suite run (it's an "extended" test).
While we're here cleanup a few other things, devpts_pts should be in
TEST_GEN_PROGS to indicate that it's built, and with the above two
changes we no longer need a custom all or clean rule.
Fixes: ce290a19609d ("selftests: add devpts selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bug fixes, plus a new test case and the associated infrastructure for
writing nested virtualization tests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: add vmx_tsc_adjust_test
kvm: x86: move MSR_IA32_TSC handling to x86.c
X86/KVM: Properly update 'tsc_offset' to represent the running guest
kvm: selftests: add -std=gnu99 cflags
x86: Add check for APIC access address for vmentry of L2 guests
KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update
X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available
kvm: selftests: fix spelling mistake: "divisable" and "divisible"
X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted
|
|
The test checks the behavior of setting MSR_IA32_TSC in a nested guest,
and the TSC_OFFSET VMCS field in general. It also introduces the testing
infrastructure for Intel nested virtualization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable test cases for the kernel's fallback to label-less mode.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Sysfs userspace tooling generally expects the kernel to emit a newlines
when reading sysfs attributes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The nfit_test.1 bus provides a pmem topology without blk-aperture
enabling, so it presents different failure modes for label space
handling. Allow custom DSM command error injection.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Given that libnvdimm driver stack takes specific actions on DIMM command
error codes like -EACCES, provide a facility to inject custom failures.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
