summaryrefslogtreecommitdiff
path: root/tools/perf/builtin-script.c
AgeCommit message (Collapse)Author
2023-02-03perf script: Support Retire LatencyKan Liang
The Retire Latency field is added in the var3_w of the PERF_SAMPLE_WEIGHT_STRUCT. The Retire Latency reports the number of elapsed core clocks between the retirement of the instruction indicated by the Instruction Pointer field of the PEBS record and the retirement of the prior instruction. That's quite useful to display the information with perf script. Add a new field retire_lat for the Retire Latency information. Reviewed-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20230104201349.1451191-9-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-02perf script: Show branch speculation infoSandipan Das
Show the branch speculation info if provided by the branch recording hardware feature. This can be useful for optimizing code further. The speculation info is appended to the end of the list of fields so any existing tools that use "/" as a delimiter for access fields via an index remain unaffected. Also show "-" instead of "N/A" when speculation info is unavailable because "/" is used as the field separator. E.g. $ perf record -j any,u,save_type ./test_branch $ perf script --fields brstacksym Before: [...] check_match+0x60/strcmp+0x0/P/-/-/0/CALL do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL [...] After: [...] check_match+0x60/strcmp+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH do_lookup_x+0x3c5/check_match+0x0/P/-/-/0/CALL/NON_SPEC_CORRECT_PATH [...] The bitfield swapping scheme used duing sample parsing has changed because of the addition of new branch flags, namely "spec", "new_type" and "priv". Earlier, these were all part of the "reserved" field but now, each of these fields get swapped separately. Change the expected flag values accordingly for the test to pass. E.g. $ perf test -v 27 Before: 27: Sample parsing : --- start --- test child forked, pid 61979 parsing failed for sample_type 0x800 test child finished with -1 ---- end ---- Sample parsing: FAILED! After: 27: Sample parsing : --- start --- test child forked, pid 63293 test child finished with 0 ---- end ---- Sample parsing: Ok Signed-off-by: Sandipan Das <sandipan.das@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: x86@kernel.org Link: https://lore.kernel.org/r/56e272583552526e999ba0b536ac009ae3613966.1675333809.git.sandipan.das@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-02-02perf script: Add 'cgroup' field for outputNamhyung Kim
There's no field for the cgroup, let's add one. To do that, users need to specify --all-cgroup option for perf record to capture the cgroup info. $ perf record --all-cgroups -- true $ perf script -F comm,pid,cgroup true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... true 337112 /user.slice/user-657345.slice/user@657345.service/... If it's recorded without the --all-cgroups, it'd complain. $ perf script -F comm,pid,cgroup Samples for 'cycles:u' event do not have CGROUP attribute set. Cannot print 'cgroup' field. Hint: run 'perf record --all-cgroups ...' Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20230126213610.3381147-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-23perf: Various spelling fixesDiederik de Haas
Fix various spelling errors as reported by Debian's lintian tool. "amount of times" -> "number of times" ocurrence -> occurrence upto -> up to Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230122122034.48020-1-didi.debian@cknow.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-20perf tools: Fix usage of the verbose variableYang Jihong
The data type of the verbose variable is integer and can be negative, replace improperly used cases in a unified manner: 1. if (verbose) => if (verbose > 0) 2. if (!verbose) => if (verbose <= 0) 3. if (XX && verbose) => if (XX && verbose > 0) 4. if (XX && !verbose) => if (XX && verbose <= 0) Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20221220035702.188413-3-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-12-14perf build: Use libtraceevent from the systemIan Rogers
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command line variables. If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the build, don't compile in libtraceevent and libtracefs support. This also disables CONFIG_TRACE that controls "perf trace". CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles, HAVE_LIBTRACEEVENT is used in C code. Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the commands kmem, kwork, lock, sched and timechart are removed. The majority of commands continue to work including "perf test". Committer notes: Fixed up a tools/perf/util/Build reject and added: #include <traceevent/event-parse.h> to tools/perf/util/scripting-engines/trace-event-perl.c. Committer testing: $ rpm -qi libtraceevent-devel Name : libtraceevent-devel Version : 1.5.3 Release : 2.fc36 Architecture: x86_64 Install Date: Mon 25 Jul 2022 03:20:19 PM -03 Group : Unspecified Size : 27728 License : LGPLv2+ and GPLv2+ Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4 Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm Build Date : Fri 15 Apr 2022 10:57:01 AM -03 Build Host : buildvm-x86-05.iad2.fedoraproject.org Packager : Fedora Project Vendor : Fedora Project URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/ Bug URL : https://bugz.fedoraproject.org/libtraceevent Summary : Development headers of libtraceevent Description : Development headers of libtraceevent-libs $ Default build: $ ldd ~/bin/perf | grep tracee libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000) $ # perf trace -e sched:* --max-events 10 0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1) 0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1) 0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120) 1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120) 1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120) 0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2) 0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2) 0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120) 1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1) 1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120) # Had to tweak tools/perf/util/setup.py to make sure the python binding shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is present in CFLAGS. Building with NO_LIBTRACEEVENT=1 uncovered some more build failures: - Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y - perf-$(CONFIG_LIBTRACEEVENT) += scripts/ - bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y - The python binding needed some fixups and util/trace-event.c can't be built and linked with the python binding shared object, so remove it in tools/perf/util/setup.py and exclude it from the list of dependencies in the python/perf.so Makefile.perf target. Building without libtraceevent-devel installed uncovered more build failures: - The python binding tools/perf/util/python.c was assuming that traceevent/parse-events.h was always available, which was the case when we defaulted to using the in-kernel tools/lib/traceevent/ files, now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like the other parts of it that deal with tracepoints. - We have to ifdef the rules in the Build files with CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't detect libtraceevent-devel installed in the system. Simplification here to avoid these two ways of disabling builtin-trace.c and not having CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean way. From Athira: <quote> tools/perf/arch/powerpc/util/Build -perf-y += kvm-stat.o +perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o </quote> Then, ditto for arm64 and s390, detected by container cross build tests. - s/390 uses test__checkevent_tracepoint() that is now only available if HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT. Also from Athira: <quote> With this change, I could successfully compile in these environment: - Without libtraceevent-devel installed - With libtraceevent-devel installed - With “make NO_LIBTRACEEVENT=1” </quote> Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for consistency with other libraries detected in tools/perf/. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: bpf@vger.kernel.org Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-27perf stat: Allocate evsel->stats->aggr properlyNamhyung Kim
The perf_stat_config.aggr_map should have a correct size of the aggregation map. Use it to allocate aggr_counts. Also AGGR_NONE with per-core events can be tricky because it doesn't aggreate basically but it needs to do so for per-core events only. So only per-core evsels will have stats->aggr data. Note that other caller of evlist__alloc_stat() might not have stat_config or aggr_map. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/20221018020227.85905-9-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-06perf script: Add missing fields in usage hintRavi Bangoria
A few fields are missing in the usage message printed when an unknown field option is passed. Add them to the list. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Link: https://lore.kernel.org/r/20221006153946.7816-9-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-06perf tools: Remove special handling of system-wide evselNamhyung Kim
For system-wide evsels, the thread map should be dummy - i.e. it has a single entry of -1. But the code guarantees such a thread map, so no need to handle it specially. No functional change intended. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221003204647.1481128-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-04perf branch: Extend branch type classificationAnshuman Khandual
This updates the perf tool with generic branch type classification with new ABI extender place holder i.e PERF_BR_EXTEND_ABI, the new 4 bit branch type field i.e perf_branch_entry.new_type, new generic page fault related branch types and some arch specific branch types as added earlier in the kernel. Committer note: Add an extra entry to the branch_type_name array to cope with PERF_BR_EXTEND_ABI, to address build warnings on some compiler/systems, like: 75 8.89 ubuntu:20.04-x-powerpc64el : FAIL gcc version 10.3.0 (Ubuntu 10.3.0-1ubuntu1~20.04) inlined from 'branch_type_stat_display' at util/branch.c:152:4: /usr/powerpc64le-linux-gnu/include/bits/stdio2.h:100:10: error: '%8s' directive argument is null [-Werror=format-overflow=] 100 | return __fprintf_chk (__stream, __USE_FORTIFY_LEVEL - 1, __fmt, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 101 | __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~ Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220824044822.70230-7-anshuman.khandual@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-09-08perf script: Fix Cannot print 'iregs' field for hybrid systemsZhengjun Xing
Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") adds a dummy event on hybrid systems to fix the symbol "unknown" issue when the workload is created in a P-core but runs on an E-core. The added dummy event will cause "perf script -F iregs" to fail. Dummy events do not have "iregs" attribute set, so when we do evsel__check_attr, the "iregs" attribute check will fail, so the issue happened. The following commit [1] has fixed a similar issue by skipping the attr check for the dummy event because it does not have any samples anyway. It works okay for the normal mode, but the issue still happened when running the test in the pipe mode. In the pipe mode, it calls process_attr() which still checks the attr for the dummy event. This commit fixed the issue by skipping the attr check for the dummy event in the API evsel__check_attr, Otherwise, we have to patch everywhere when evsel__check_attr() is called. Before: #./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field. 0x120 [0x90]: failed to process type: 64 # After: # ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100 ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71 ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0 ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1 ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58 # [1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/ Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-31perf script: Skip dummy event attr checkJiri Olsa
Hongtao Yu reported problem when displaying uregs in perf script for system wide perf.data: # perf script -F uregs | head -10 Samples for 'dummy:HG' event do not have UREGS attribute set. Cannot print 'uregs' field. The problem is the extra dummy event added for system wide, which does not have proper sample_type setup. Skipping attr check completely for dummy event as suggested by Namhyung, because it does not have any samples anyway. Reported-by: Hongtao Yu <hoy@fb.com> Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220831124041.219925-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-08-12perf script: Delete repeated word "from"shaomin Deng
Delete the repeated word "from" in code. Signed-off-by: shaomin Deng <dengshaomin@cdjrlc.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220807080642.13004-1-dengshaomin@cdjrlc.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-20perf script: Add machine_pid and vcpuAdrian Hunter
Add fields machine_pid and vcpu. These are displayed only if machine_pid is non-zero. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-16-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-20perf script: Add --dump-unsorted-raw-trace optionAdrian Hunter
When reviewing the results of perf inject, it is useful to be able to see the events in the order they appear in the file. So add --dump-unsorted-raw-trace option to do an unsorted dump. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220711093218.10967-8-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-23perf script: Add some missing event dumpsAdrian Hunter
When the -D option is used, the details of thread-map, cpu-map and event-update events are not currently dumped. Add prints so that they are. Example: # perf record --kcore sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.021 MB perf.data (7 samples) ] # perf script -D | grep 'THREAD\|CPU' 0 0x4950 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 35116 0 0x4978 [0x20]: PERF_RECORD_CPU_MAP: 0-7 # perf script -D | grep -A4 'UPDATE' 0 0x4920 [0x30]: PERF_RECORD_EVENT_UPDATE ... id: 147 ... 0-7 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220610113316.6682-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-23perf script: Add guest_code supportAdrian Hunter
Add an option to indicate that guest code can be found in the hypervisor process. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kvm@vger.kernel.org Link: https://lore.kernel.org/r/20220517131011.6117-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-05-17perf script: Print Intel ptwrite value as a string if it is ASCIIAdrian Hunter
It can be convenient to put a string value into a ptwrite payload as a quick and easy way to identify what is being printed. To make that useful, if the Intel ptwrite payload value contains only printable ASCII characters padded with NULLs, then print it also as a string. Using the example program from the "Emulated PTWRITE" section of tools/perf/Documentation/perf-intel-pt.txt: $ echo -n "Hello" | od -t x8 0000000 0000006f6c6c6548 0000005 $ perf record -e intel_pt//u ./eg_ptw 0x0000006f6c6c6548 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=ew eg_ptw 35563 [005] 18256.087338: ptwrite: IP: 0 payload: 0x6f6c6c6548 Hello 55e764db5196 perf_emulate_ptwrite+0x16 (/home/user/eg_ptw) $ Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220509152400.376613-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-04-22perf script: Always allow field 'data_src' for auxtraceLeo Yan
If use command 'perf script -F,+data_src' to dump memory samples with Arm SPE trace data, it reports error: # perf script -F,+data_src Samples for 'dummy:u' event do not have DATA_SRC attribute set. Cannot print 'data_src' field. This is because the 'dummy:u' event is absent DATA_SRC bit in its sample type, so if a file contains AUX area tracing data then always allow field 'data_src' to be selected as an option for perf script. Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event") Signed-off-by: Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220417114837.839896-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-03-26perf tools: Enhance the matching of sub-commands abbreviationsWei Li
We support short command 'rec*' for 'record' and 'rep*' for 'report' in lots of sub-commands, but the matching is not quite strict currnetly. It may be puzzling sometime, like we mis-type a 'recport' to report but it will perform 'record' in fact without any message. To fix this, add a check to ensure that the short cmd is valid prefix of the real command. Committer testing: [root@quaco ~]# perf c2c re sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c rec sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (16 samples) ] # perf c2c recport sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # perf c2c record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.038 MB perf.data (15 samples) ] # perf c2c records sleep 1 Usage: perf c2c {record|report} -v, --verbose be more verbose (show counter open errors, etc) # Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rui Xiang <rui.xiang@huawei.com> Link: http://lore.kernel.org/lkml/20220325092032.2956161-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-03-22perf script: Add 'brstackinsnlen' for branch stacksKan Liang
When analyzing with 'perf script', it's useful to understand the captured instruction and the next sequential instruction. To calculate the address of the next sequential instruction, the length of the captured instruction is required. For example, you can’t know the next sequential instruction after an unconditional branch unless you calculate that based on its length. For branch stacks, 'perf script' only prints the instruction bytes with 'brstackinsn', but lacks the instruction length. Add 'brstackinsnlen' to print the instruction length. $ perf script -F ip,brstackinsn,brstackinsnlen --xed 7fa555be8f75 _start: 00007fa555be8090 mov %rsp, %rdi ilen: 3 00007fa555be8093 callq 0x7fa555be8ea0 ilen: 5 # PRED 102 cycles [102] 0.02 IPC _dl_start+38: 00007fa555be8ec6 movq %rdx,0x227853(%rip) ilen: 7 00007fa555be8ecd leaq 0x227f94(%rip),%rdx ilen: 7 Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Ahmad Yasin <ahmad.yasin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: https://lore.kernel.org/r/1647871212-184070-1-git-send-email-kan.liang@linux.intel.com [ Added the new field to tools/perf/Documentation/perf-script.txt ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-03-14Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up fixes that went thru perf/urgent. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-03-07perf script: Output branch sample typeJames Clark
The type info is saved when using '-j save_type'. Output this in 'perf script' so it can be accessed by other tools or for debugging. It's appended to the end of the list of fields so any existing tools that split on / and access fields via an index are not affected. Also output '-' instead of 'N/A' when the branch type isn't saved because / is used as a field separator. Entries before this change look like this: 0xaaaadb350838/0xaaaadb3507a4/P/-/-/0 And afterwards like this: 0xaaaadb350838/0xaaaadb3507a4/P/-/-/0/CALL or this if no type info is saved: 0x7fb57586df6b/0x7fb5758731f0/P/-/-/143/- Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220307171917.2555829-5-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-03-07perf script: Refactor branch stack printingJames Clark
Remove duplicate code so that future changes to flags are always made to all 3 printing variations. Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: German Gomez <german.gomez@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220307171917.2555829-4-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-22perf script: Fix error when printing 'weight' fieldGerman Gomez
In SPE traces the 'weight' field can't be printed in 'perf script' because the 'dummy:u' event doesn't have the WEIGHT attribute set. Use evsel__do_check_stype(..) to check this field, as it's done with other fields such as "phys_addr". Before: $ perf record -e arm_spe_0// -- sleep 1 $ perf script -F event,ip,weight Samples for 'dummy:u' event do not have WEIGHT attribute set. Cannot print 'weight' field. After: $ perf script -F event,ip,weight l1d-access: 12 ffffaf629d4cb320 tlb-access: 12 ffffaf629d4cb320 memory: 12 ffffaf629d4cb320 Fixes: b0fde9c6e291e528 ("perf arm-spe: Add SPE total latency as PERF_SAMPLE_WEIGHT") Signed-off-by: German Gomez <german.gomez@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220221171707.62960-1-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-15perf script: Display new D (Intr Disabled) and t (Intr Toggle) flagsAdrian Hunter
Amend the display to include D and t flags in the same way as the x flag. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20220124084201.2699795-21-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-15perf script: Display Intel PT iflag synthesized eventAdrian Hunter
Similar to other Intel PT synth events, display changes to the interrupt flag represented by the MODE.Exec packet. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20220124084201.2699795-20-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-02-15perf script: Display Intel PT CFE (Control Flow Event) / EVD (Event Data) ↵Adrian Hunter
synthesized event Similar to other Intel PT synth events, display Event Trace events recorded by CFE / EVD packets. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20220124084201.2699795-19-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-22perf script: Fix printing 'phys_addr' failure issueYao Jin
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by: German Gomez <german.gomez@arm.com> Signed-off-by: Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.com Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-12perf cpumap: Give CPUs their own typeIan Rogers
A common problem is confusing CPU map indices with the CPU, by wrapping the CPU with a struct then this is avoided. This approach is similar to atomic_t. Committer notes: To make it build with BUILD_BPF_SKEL=1 these files needed the conversions to 'struct perf_cpu' usage: tools/perf/util/bpf_counter.c tools/perf/util/bpf_counter_cgroup.c tools/perf/util/bpf_ftrace.c Also perf_env__get_cpu() was removed back in "perf cpumap: Switch cpu_map__build_map to cpu function". Additionally these needed to be fixed for the ARM builds to complete: tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/pmu.c Suggested-by: John Garry <john.garry@huawei.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-12perf script: Fix flipped index and cpuIan Rogers
perf_counts are accessed by the densely packed index. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-47-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-12perf script: Use for each cpu to aid readabilityIan Rogers
Use perf_cpu_map__for_each_cpu() to help with readability. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-33-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-03Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-28perf script: Fix CPU filtering of a script's switch eventsAdrian Hunter
CPU filtering was not being applied to a script's switch events. Fixes: 5bf83c29a0ad2e78 ("perf script: Add scripting operation process_switch()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211215080636.149562-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-21perf callchain: Enable dwarf_callchain_users on arm64Alexandre Truong
Enable dwarf_callchain_users on arm64 which will be needed to do a DWARF unwind in order to get the caller of the leaf frame. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Alexandre Truong <alexandre.truong@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211217154521.80603-5-german.gomez@arm.com Signed-off-by: German Gomez <german.gomez@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-21perf script: Use callchain_param_setup() instead of open coded equivalentAlexandre Truong
Refactoring script__setup_sample_type() by using callchain_param_setup() to replace the duplicate code for callchain parameter setting up. Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Alexandre Truong <alexandre.truong@arm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211217154521.80603-4-german.gomez@arm.com Signed-off-by: German Gomez <german.gomez@arm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-12-16perf arch: Support register names from all archsGerman Gomez
When reading a perf.data file with register values, there is a mismatch between the names and the values of the registers because the tool is built using only the register names from the local architecture. Reading a perf.data file that was recorded on ARM64, gives the following erroneous output on an X86 machine: # perf report -i perf_arm64.data -D [...] 24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0 ... user regs: mask 0x1ffffffff ABI 64-bit .... AX 0x0000ffffd1515817 .... BX 0x0000ffffd1515480 .... CX 0x0000aaaadabf6c80 .... DX 0x000000000000002e .... SI 0x0000000040100401 .... DI 0x0040600200000080 .... BP 0x0000ffffd1510e10 .... SP 0x0000000000000000 .... IP 0x00000000000000dd .... FLAGS 0x0000ffffd1510cd0 .... CS 0x0000000000000000 .... SS 0x0000000000000030 .... DS 0x0000ffffa569a208 .... ES 0x0000000000000000 .... FS 0x0000000000000000 .... GS 0x0000000000000000 .... R8 0x0000aaaad3de9650 .... R9 0x0000ffffa57397f0 .... R10 0x0000000000000001 .... R11 0x0000ffffa57fd000 .... R12 0x0000ffffd1515817 .... R13 0x0000ffffd1515480 .... R14 0x0000aaaadabf6c80 .... R15 0x0000000000000000 .... unknown 0x0000000000000001 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000000000000000 .... unknown 0x0000ffffd1510d90 .... unknown 0x0000ffffa5739b90 .... unknown 0x0000ffffd1510d80 .... XMM0 0x0000ffffa57392c8 ... thread: perf-exec:43239 ...... dso: [kernel.kallsyms] As can be seen, the register names correspond to X86 registers, even though the perf.data file was recorded on an ARM64 system. After this patch, the output of the command displays the correct register names: # perf report -i perf_arm64.data -D [...] 24661932634451 0x698 [0x21d0]: PERF_RECORD_SAMPLE(IP, 0x1): 43239/43239: 0xffffc5be8f100f98 period: 1 addr: 0 ... user regs: mask 0x1ffffffff ABI 64-bit .... x0 0x0000ffffd1515817 .... x1 0x0000ffffd1515480 .... x2 0x0000aaaadabf6c80 .... x3 0x000000000000002e .... x4 0x0000000040100401 .... x5 0x0040600200000080 .... x6 0x0000ffffd1510e10 .... x7 0x0000000000000000 .... x8 0x00000000000000dd .... x9 0x0000ffffd1510cd0 .... x10 0x0000000000000000 .... x11 0x0000000000000030 .... x12 0x0000ffffa569a208 .... x13 0x0000000000000000 .... x14 0x0000000000000000 .... x15 0x0000000000000000 .... x16 0x0000aaaad3de9650 .... x17 0x0000ffffa57397f0 .... x18 0x0000000000000001 .... x19 0x0000ffffa57fd000 .... x20 0x0000ffffd1515817 .... x21 0x0000ffffd1515480 .... x22 0x0000aaaadabf6c80 .... x23 0x0000000000000000 .... x24 0x0000000000000001 .... x25 0x0000000000000000 .... x26 0x0000000000000000 .... x27 0x0000000000000000 .... x28 0x0000000000000000 .... x29 0x0000ffffd1510d90 .... lr 0x0000ffffa5739b90 .... sp 0x0000ffffd1510d80 .... pc 0x0000ffffa57392c8 ... thread: perf-exec:43239 ...... dso: [kernel.kallsyms] Tester comments: Athira reports: "Looks good to me. Tested this patchset in powerpc by capturing regs in powerpc and doing perf report to read the data from x86." Reported-by: Alexandre Truong <alexandre.truong@arm.com> Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-csky@vger.kernel.org Cc: linux-riscv@lists.infradead.org Link: https://lore.kernel.org/r/20211207180653.1147374-4-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-07perf tools: Check vmlinux/kallsyms arguments in all toolsJames Clark
Only perf report checked the validity of these arguments so apply the same check to all tools that read them for consistency. Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Denis Nikitin <denik@chromium.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20211018134844.2627174-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-01Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up fixes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-31perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT supportKan Liang
-F weight in perf script is broken. # ./perf mem record # ./perf script -F weight Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot print 'weight' field. The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The lower 32 bits are exactly the same for both sample type. The higher 32 bits may be different for different architecture. For a new kernel on x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other ARCHs, the PERF_SAMPLE_WEIGHT is used. With -F weight, current perf script will only check the input string "weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit ea8d0ed6eae3 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a new kernel on x86, the check fails. Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to replace PERF_SAMPLE_WEIGHT Fixes: ea8d0ed6eae37b01 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Joe Mario <jmario@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/1632929894-102778-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-31perf script: Check session->header.env.arch before using itSong Liu
When perf.data is not written cleanly, we would like to process existing data as much as possible (please see f_header.data.size == 0 condition in perf_session__read_header). However, perf.data with partial data may crash perf. Specifically, we see crash in 'perf script' for NULL session->header.env.arch. Fix this by checking session->header.env.arch before using it to determine native_arch. Also split the if condition so it is easier to read. Committer notes: If it is a pipe, we already assume is a native arch, so no need to check session->header.env.arch. Signed-off-by: Song Liu <songliubraving@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-10-28perf script: Support instruction latencyKan Liang
The instruction latency information can be recorded on some platforms, e.g., the Intel Sapphire Rapids server. With both memory latency (weight) and the new instruction latency information, users can easily locate the expensive load instructions, and also understand the time spent in different stages. The users can optimize their applications in different pipeline stages. Add a new field "ins_lat" to filter the instruction latency information, which is available with sample type PERF_SAMPLE_WEIGHT_STRUCT. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Link: https://lore.kernel.org/r/1632929894-102778-2-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-18perf script: Fix ip display when type != attr->typeAdrian Hunter
set_print_ip_opts() was not being called when type != attr->type because there is not a one-to-one relationship between output types and attr->type. That resulted in ip not printing. The attr_type() function is removed, and the match of attr->type to output type is corrected. Example on ADL using taskset to select an atom cpu: # perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ] Before: # perf script | head taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/: taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/: uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/: After: # perf script | head taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms]) taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so) uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms]) Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-03perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta eventStephen Brennan
perf_events may sometimes throttle an event due to creating too many samples during a given timer tick. As of now, the perf tool will not report on throttling, which means this is a silent error. Implement a callback for the throttle and unthrottle events within the Python scripting engine, which can allow scripts to detect and report when events may have been lost due to throttling. The simplest script to report throttle events is: def throttle(*args): print("throttle" + repr(args)) def unthrottle(*args): print("unthrottle" + repr(args)) Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210901210815.133251-1-stephen.s.brennan@oracle.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-11perf script: Fix unnecessary machine_resolve()Adrian Hunter
machine_resolve() may have already been called. Test for that to avoid calling it again unnecessarily. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https //lore.kernel.org/r/20210811101036.17986-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-02perf tools: Remove repipe argument from perf_session__new()Namhyung Kim
The repipe argument is only used by perf inject and the all others passes 'false'. Let's remove it from the function signature and add __perf_session__new() to be called from perf inject directly. This is a preparation of the change the pipe input/output. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org [ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf script: Fix memory 'threads' and 'cpus' leaks on exitRiccardo Mancini
ASan reports several memory leaks while running: # perf test "82: Use vfs_getname probe to get syscall args filenames" Two of these are caused by some refcounts not being decreased on perf-script exit, namely script.threads and script.cpus. This patch adds the missing __put calls in a new perf_script__exit function, which is called at the end of cmd_script. This patch concludes the fixes of all remaining memory leaks in perf test "82: Use vfs_getname probe to get syscall args filenames". Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: cfc8874a48599249 ("perf script: Process cpu/threads maps") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/5ee73b19791c6fa9d24c4d57f4ac1a23609400d7.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-15perf script: Release zstd dataRiccardo Mancini
ASan reports several memory leak while running: # perf test "82: Use vfs_getname probe to get syscall args filenames" One of the leaks is caused by zstd data not being released on exit in perf-script. This patch adds the missing zstd_fini(). Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: b13b04d9382113f7 ("perf script: Initialize zstd_data") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/39388e8cc2f85ca219ea18697a17b7bd8f74b693.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-09libperf: Move 'leader' from tools/perf to perf_evsel::leaderJiri Olsa
Move evsel::leader to perf_evsel::leader, so we can move the group interface to libperf. Also add several evsel helpers to ease up the transition: struct evsel *evsel__leader(struct evsel *evsel); - get leader evsel bool evsel__has_leader(struct evsel *evsel, struct evsel *leader); - true if evsel has leader as leader bool evsel__is_leader(struct evsel *evsel); - true if evsel is itw own leader void evsel__set_leader(struct evsel *evsel, struct evsel *leader); - set leader for evsel Committer notes: Fix this when building with 'make BUILD_BPF_SKEL=1' tools/perf/util/bpf_counter.c - if (evsel->leader->core.nr_members > 1) { + if (evsel->core.leader->nr_members > 1) { Signed-off-by: Jiri Olsa <jolsa@kernel.org> Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210706151704.73662-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01perf script: Add option to pass arguments to dlfiltersAdrian Hunter
Add option --dlarg to pass arguments to dlfilters. The --dlarg option can be repeated to pass more than 1 argument. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210627131818.810-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 12:04:56 +0000