| Age | Commit message (Collapse) | Author |
|---|
|
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
|
|
Since commit d927ef5004ef ("perf cs-etm: Add exception level consistency
check"), the exception that was added to Perf will be triggered unless
the following bugfix from OpenCSD is present:
- _Version 1.2.1_:
- __Bugfix__:
ETM4x / ETE - output of context elements to client can in some
circumstances be delayed until after subsequent atoms have been
processed leading to incorrect memory decode access via the client
callbacks. Fixed to flush context elements immediately they are
committed.
Rather than remove the assert and silently fail, just increase the
minimum version requirement to avoid hard to debug issues and
regressions.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230901133716.677499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dwarf_getcfi() is available on libdw 0.142+. Instead of just
checking the version number, it'd be nice to have a config item to check
the feature at build time.
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231110000012.3538610-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the latest fixes in the perf tools including perf stat output,
dlfilter and LLVM feature detection.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When removing the BPF event for perf a feature test that checks if the
llvm devel files are availabe was removed but that is also used by
bpftool.
bpftool uses it to decide what kind of disassembly it will use: llvm or
binutils based.
Removing the tools/build/feature/test-llvm.cpp file made bpftool to
always fallback to binutils disassembly, even with the llvm devel files
installed, fix it by restoring just that small test-llvm.cpp test file.
Fixes: 56b11a2126bf2f42 ("perf bpf: Remove support for embedding clang for compiling BPF events (-e foo.c)")
Reported-by: Manu Bretelle <chantr4@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Manu Bretelle <chantr4@gmail.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/lkml/ZTGa0Ukt7QyxWcVy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As Dmitry described in [1] changelog the current way of detecting
-s option is broken for new make.
Changing the tools/build -s option detection the same way as it was
fixed for root Makefile in [1].
[1] 4bf73588165b ("kbuild: Port silent mode detection to future gnu make.")
Cc: Dmitry Goncharov <dgoncharov@users.sf.net>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231008212251.236023-2-jolsa@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf tools maintainership:
- Add git information for perf-tools and perf-tools-next trees and
branches to the MAINTAINERS file. That is where development now
takes place and myself and Namhyung Kim have write access, more
people to come as we emulate other maintainer groups.
perf record:
- Record kernel data maps when 'perf record --data' is used, so that
global variables can be resolved and used in tools that do data
profiling.
perf trace:
- Remove the old, experimental support for BPF events in which a .c
file was passed as an event: "perf trace -e hello.c" to then get
compiled and loaded.
The only known usage for that, that shipped with the kernel as an
example for such events, augmented the raw_syscalls tracepoints and
was converted to a libbpf skeleton, reusing all the user space
components and the BPF code connected to the syscalls.
In the end just the way to glue the BPF part and the user space
type beautifiers changed, now being performed by libbpf skeletons.
The next step is to use BTF to do pretty printing of all syscall
types, as discussed with Alan Maguire and others.
Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
path/filenames/strings, some of the networking data structures,
perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
seconds:
# perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0
10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0
3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0
3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0
4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0
Performance counter stats for 'sleep 5':
2,617,347 cycles
1,855,997 instructions # 0.71 insn per cycle
5.002282128 seconds time elapsed
0.000855000 seconds user
0.000852000 seconds sys
perf annotate:
- Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
for licensing reasons, and we missed a build test on
tools/perf/tests makefile.
Since we now default to NDEBUG=1, we ended up segfaulting when
building with BUILD_NONDISTRO=1 because a needed initialization
routine was being "error checked" via an assert.
Fix it by explicitly checking the result and aborting instead if it
fails.
We better back propagate the error, but at least 'perf annotate' on
samples collected for a BPF program is back working when perf is
built with BUILD_NONDISTRO=1.
perf report/top:
- Add back TUI hierarchy mode header, that is seen when using 'perf
report/top --hierarchy'.
- Fix the number of entries for 'e' key in the TUI that was
preventing navigation of lines when expanding an entry.
perf report/script:
- Support cross platform register handling, allowing a perf.data file
collected on one architecture to have registers sampled correctly
displayed when analysis tools such as 'perf report' and 'perf
script' are used on a different architecture.
- Fix handling of event attributes in pipe mode, i.e. when one uses:
perf record -o - | perf report -i -
When no perf.data files are used.
- Handle files generated via pipe mode with a version of perf and
then read also via pipe mode with a different version of perf,
where the event attr record may have changed, use the record size
field to properly support this version mismatch.
perf probe:
- Accessing global variables from uprobes isn't supported, make the
error message state that instead of stating that some minimal
kernel version is needed to have that feature. This seems just a
tool limitation, the kernel probably has all that is needed.
perf tests:
- Fix a reference count related leak in the dlfilter v0 API where the
result of a thread__find_symbol_fb() is not matched with an
addr_location__exit() to drop the reference counts of the resolved
components (machine, thread, map, symbol, etc). Add a dlfilter test
to make sure that doesn't regresses.
- Lots of fixes for the 'perf test' written in shell script related
to problems found with the shellcheck utility.
- Fixes for 'perf test' shell scripts testing features enabled when
perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
counters.
- Add perf record sample filtering test, things like the following
example, that gets implemented as a BPF filter attached to the
event:
# perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'
- Improve the way the task_analyzer test checks if libtraceevent is
linked, using 'perf version --build-options' instead of the more
expensinve 'perf record -e "sched:sched_switch"'.
- Add support for riscv in the mmap-basic test. (This went as well
via the RiscV tree, same contents).
libperf:
- Implement riscv mmap support (This went as well via the RiscV tree,
same contents).
perf script:
- New tool that converts perf.data files to the firefox profiler
format so that one can use the visualizer at
https://profiler.firefox.com/. Done by Anup Sharma as part of this
year's Google Summer of Code.
One can generate the output and upload it to the web interface but
Anup also automated everything:
perf script gecko -F 99 -a sleep 60
- Support syscall name parsing on arm64.
- Print "cgroup" field on the same line as "comm".
perf bench:
- Add new 'uprobe' benchmark to measure the overhead of uprobes
with/without BPF programs attached to it.
- breakpoints are not available on power9, skip that test.
perf stat:
- Add #num_cpus_online literal to be used in 'perf stat' metrics, and
add this extra 'perf test' check that exemplifies its purpose:
TEST_ASSERT_VAL("#num_cpus_online",
expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);
Miscellaneous:
- Improve tool startup time by lazily reading PMU, JSON, sysfs data.
- Improve error reporting in the parsing of events, passing YYLTYPE
to error routines, so that the output can show were the parsing
error was found.
- Add 'perf test' entries to check the parsing of events
improvements.
- Fix various leak for things detected by -fsanitize=address, mostly
things that would be freed at tool exit, including:
- Free evsel->filter on the destructor.
- Allow tools to register a thread->priv destructor and use it in
'perf trace'.
- Free evsel->priv in 'perf trace'.
- Free string returned by synthesize_perf_probe_point() when the
caller fails to do all it needs.
- Adjust various compiler options to not consider errors some
warnings when building with broken headers found in things like
python, flex, bison, as we otherwise build with -Werror. Some for
gcc, some for clang, some for some specific version of those, some
for some specific version of flex or bison, or some specific
combination of these components, bah.
- Allow customization of clang options for BPF target, this helps
building on gentoo where there are other oddities where BPF targets
gets passed some compiler options intended for the native build, so
building with WERROR=0 helps while these oddities are fixed.
- Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
and 'perf lock', fixing some segfaults when handling some odd
failures.
- Add LTO build option.
- Fix format of unordered lists in the perf docs
(tools/perf/Documentation)
- Overhaul the bison files, using constructs such as YYNOMEM.
- Remove unused tokens from the bison .y files.
- Add more comments to various structs.
- A few LoongArch enablement patches.
Vendor events (JSON):
- Add JSON metrics for Yitian 710 DDR (aarch64). Things like:
EventName, BriefDescription
visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.",
op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.",
op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",
- Add AmpereOne metrics (aarch64).
- Update N2 and V2 metrics (aarch64) and events using Arm telemetry
repo.
- Update scale units and descriptions of common topdown metrics on
aarch64. Things like:
- "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
- "BriefDescription": "Frontend bound L1 topdown metric",
+ "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
+ "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",
- Update events for intel: meteorlake to 1.04, sapphirerapids to
1.15, Icelake+ metric constraints.
- Update files for the power10 platform"
* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
perf parse-events: Fix driver config term
perf parse-events: Fixes relating to no_value terms
perf parse-events: Fix propagation of term's no_value when cloning
perf parse-events: Name the two term enums
perf list: Don't print Unit for "default_core"
perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
perf dlfilter: Avoid leak in v0 API test use of resolve_address()
perf metric: Add #num_cpus_online literal
perf pmu: Remove str from perf_pmu_alias
perf parse-events: Make common term list to strbuf helper
perf parse-events: Minor help message improvements
perf pmu: Avoid uninitialized use of alias->str
perf jevents: Use "default_core" for events with no Unit
perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
perf test shell stat_bpf_counters: Fix test on Intel
perf test shell record_bpf_filter: Skip 6.2 kernel
libperf: Get rid of attr.id field
perf tools: Convert to perf_record_header_attr_id()
libperf: Add perf_record_header_attr_id()
perf tools: Handle old data in PERF_RECORD_ATTR
...
|
|
This never was in the default build for perf, is difficult to maintain
as it uses clang/llvm internals so ditch it, keeping, for now, the
external compilation of .c BPF into .o bytecode and its subsequent
loading, that is also going to be removed, do it separately to help
bisection and to properly document what is being removed and why.
Committer notes:
Extracted from a larger patch and removed some leftovers, namely
deleting these now unused feature tests:
tools/build/feature/test-clang.cpp
tools/build/feature/test-cxx.cpp
tools/build/feature/test-llvm-version.cpp
tools/build/feature/test-llvm.cpp
Testing the use of BPF events after applying this patch:
To use the external clang/llvm toolchain to compile a .c event and then
use libbpf to load it, to get the syscalls:sys_enter_open* tracepoints
and read the filename pointer, putting it into the ring buffer right
after the usual tracepoint payload for 'perf trace' to then print it:
[root@quaco ~]# perf trace -e /home/acme/git/perf-tools-next/tools/perf/examples/bpf/augmented_raw_syscalls.c,open* --max-events=10
0.000 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
0.083 abrt-dump-jour/1453 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
0.063 abrt-dump-jour/1454 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
0.082 abrt-dump-jour/1455 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
250.124 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
250.521 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/app.slice/memory.pressure", flags: RDONLY|CLOEXEC) = 12
251.047 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/app.slice/memory.current", flags: RDONLY|CLOEXEC) = 12
251.162 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/app.slice/memory.min", flags: RDONLY|CLOEXEC) = 12
251.242 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/app.slice/memory.low", flags: RDONLY|CLOEXEC) = 12
251.353 systemd-oomd/959 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1000.slice/user@1000.service/app.slice/memory.swap.current", flags: RDONLY|CLOEXEC) = 12
[root@quaco ~]#
Same thing, but with a prebuilt .o BPF bytecode:
[root@quaco ~]# perf trace -e /home/acme/git/perf-tools-next/tools/perf/examples/bpf/augmented_raw_syscalls.o,open* --max-events=10
0.000 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
0.083 abrt-dump-jour/1453 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
0.083 abrt-dump-jour/1455 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
0.062 abrt-dump-jour/1454 openat(dfd: CWD, filename: "/var/log/journal/d6a97235307247e09f13f326fb607e3c/system.journal", flags: RDONLY|CLOEXEC|NONBLOCK) = 4
249.985 systemd-oomd/959 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 12
466.763 thermald/1234 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:2/energy_uj") = 13
467.145 thermald/1234 openat(dfd: CWD, filename: "/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj") = 13
467.311 thermald/1234 openat(dfd: CWD, filename: "/sys/class/thermal/thermal_zone2/temp") = 13
500.040 cgroupify/24006 openat(dfd: 4, filename: ".", flags: RDONLY|CLOEXEC|DIRECTORY|NONBLOCK) = 5
500.295 cgroupify/24006 openat(dfd: 4, filename: "24616/cgroup.procs") = 5
[root@quaco ~]#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/lkml/ZNZWsAXg2px1sm2h@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Perf build auto-detects features and packages already installed for its
build. This is done in directory tools/build/feature. This directory
contains small sample programs. When they successfully compile the
necessary prereqs in form of libraries and header files are present.
Such a check is also done for llvm and clang. And the checks fail.
Fix this and update to the latest C++ standard and use the new library
provided by clang (which contains new packaging) s/ee this link for
reference:
https://fedoraproject.org/wiki/Changes/Stop-Shipping-Individual-Component-Libraries-In-clang-lib-Package
Output before:
# rm -f ./test-clang.bin; make test-clang.bin; ./test-clang.bin; \
ll test-clang.make.output
g++ -MD -Wall -Werror -o test-clang.bin test-clang.cpp \
> test-clang.make.output 2>&1 -std=gnu++14 \
-I/usr/include \
-L/usr/lib64 \
-Wl,--start-group -lclangBasic -lclangDriver \
-lclangFrontend -lclangEdit -lclangLex \
-lclangAST -Wl,--end-group \
-lLLVM-16 \
\
> test-clang.make.output 2>&1
make: *** [Makefile:356: test-clang.bin] Error 1
-bash: ./test-clang.bin: No such file or directory
-rw-r--r--. 1 root root 252041 Jul 12 09:56 test-clang.make.output
#
File test-clang.make.output contains many lines of unreferenced
symbols.
Output after:
# rm -f ./test-clang.bin; make test-clang.bin; ./test-clang.bin; \
cat test-clang.make.output
g++ -MD -Wall -Werror -o test-clang.bin test-clang.cpp \
> test-clang.make.output 2>&1 -std=gnu++17 \
-I/usr/include \
-L/usr/lib64 \
-Wl,--start-group -lclang-cpp -Wl,--end-group \
-lLLVM-16 \
\
> test-clang.make.output 2>&1
#
Committer notes:
Test it in the tools/build/feature directory, and have clang-devel and
llvm-devel installed.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lore.kernel.org/r/20230725150347.3479291-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The bison and flex generate C files from the source (.y and .l)
files. When O= option is used, they are saved in a separate directory
but the default build rule assumes the .C files are in the source
directory. So it might read invalid file if there are generated files
from an old version. The same is true for the pmu-events files.
For example, the following command would cause a build failure:
$ git checkout v6.3
$ make -C tools/perf # build in the same directory
$ git checkout v6.5-rc2
$ mkdir build # create a build directory
$ make -C tools/perf O=build # build in a different directory but it
# refers files in the source directory
Let's update the build rule to specify those cases explicitly to depend
on the files in the output directory.
Note that it's not a complete fix and it needs the next patch for the
include path too.
Fixes: 80eeb67fe577aa76 ("perf jevents: Program to convert JSON file")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anup Sharma <anupnewsmail@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230728022447.1323563-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The perf build process auto-detects features and packages already
installed for its build. This is done in directory tools/build/feature.
This directory contains small sample programs. When they successfully
compile the necessary prereqs in form of libraries and header files are
present.
Such a check is also done for libtracefs. And this check fails:
Output before:
# rm -f test-libtracefs.bin; make test-libtracefs.bin
gcc -MD -Wall -Werror -o test-libtracefs.bin test-libtracefs.c \
> test-libtracefs.make.output 2>&1 -ltracefs
make: *** [Makefile:211: test-libtracefs.bin] Error 1
# cat test-libtracefs.make.output
In file included from test-libtracefs.c:2:
/usr/include/tracefs/tracefs.h:11:10: fatal error: \
event-parse.h: No such file or directory
11 | #include <event-parse.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
#
The root cause of this compile error is commit 880885d9c22e
("libtracefs: Remove "traceevent/" from referencing libtraceevent
headers") in the libtracefs project hosted here:
https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/
That mentioned patch removes the traceevent/ directory name from
the include statement, causing the file not to be included even
when the libtraceevent-devel package is installed. This package contains
the file referred to in tracefs/tracefs.h:
# rpm -ql libtraceevent-devel
/usr/include/traceevent
/usr/include/traceevent/event-parse.h <----- here
/usr/include/traceevent/event-utils.h
/usr/include/traceevent/kbuffer.h
/usr/include/traceevent/trace-seq.h
/usr/lib64/libtraceevent.so
/usr/lib64/pkgconfig/libtraceevent.pc
#
With this patch the compile succeeds.
Output after:
# rm -f test-libtracefs.bin; make test-libtracefs.bin
gcc -MD -Wall -Werror -o test-libtracefs.bin test-libtracefs.c \
> test-libtracefs.make.output 2>&1 -I/usr/include/traceevent -ltracefs
#
Committer testing:
$ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools -C tools/perf install-bin
Before:
$ cat /tmp/build/perf-tools/feature/test-libtracefs.make.output
In file included from test-libtracefs.c:2:
/usr/include/tracefs/tracefs.h:11:10: fatal error: event-parse.h: No such file or directory
11 | #include <event-parse.h>
| ^~~~~~~~~~~~~~~
compilation terminated.
$
$ grep -i tracefs /tmp/build/perf-tools/FEATURE-DUMP
feature-libtracefs=0
$
After:
$ cat /tmp/build/perf-tools/feature/test-libtracefs.make.output
$
$ grep -i tracefs /tmp/build/perf-tools/FEATURE-DUMP
feature-libtracefs=1
$
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230711135338.397473-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -target option has been deprecated since clang 3.4 in 2013. Therefore, use
the preferred --target=bpf form instead. This also matches how we use --target=
in scripts/Makefile.clang.
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://github.com/llvm/llvm-project/commit/274b6f0c87a6a1798de0a68135afc7f95def6277
Link: https://lore.kernel.org/bpf/20230624001856.1903733-1-maskray@google.com
|
|
far in musl and uclibc
We use it just when listing tracepoint events, and for root, so just
emit a warning about it to get users to ask the library maintainers to
implement it, as suggested in this systemd ticket:
https://github.com/systemd/casync/issues/129
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZCwv4z5Dh%2FdHUMG6@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
cxxabi.h is part of libsdtc++ and LLVM's libcxx, providing
abi::__cxa_demangle a portable C++ demangler. Add a feature test to
detect that the function is available.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature tests were necessary for libbpf pre-1.0, but as the libbpf
implies at least 1.0 we can remove these now.
Committer notes:
Modified tools/perf/Makefile.config to better reflect the reason for
failure when the libbpf present is < 1.0 and LIBBPF_DYNAMIC=1 was asked
for.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230116010115.490713-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
libbpf 1.0 represented a cleanup and stabilization of APIs. Simplify
development by only passing the feature test if libbpf 1.0 is installed.
Committer notes:
Change 'make -C tools/perf build-test' so that the LIBBPF_DYNAMIC=1 test
runs only if libbpf is >= 1.0.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230116010115.490713-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add quiet_cmd_test so that:
$(Q)$(call echo-cmd,test)
will print:
TEST <path>
This is useful for executing compile-time tests similar to what
happens for fortify tests in the kernel's lib directory.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Florian Fischer <florian.fischer@muhq.space>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kang Minchul <tegongkang@gmail.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230126233645.200509-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bpf_program__set_insns() is available
During the transition to libbpf 1.0 some functions that perf used were
deprecated and finally removed from libbpf, so bpf_program__set_insns()
was introduced for perf to continue to use its bpf loader.
But when build with LIBBPF_DYNAMIC=1 we now need to check if that
function is available so that perf can build with older libbpf versions,
even if the end result is emitting a warning to the user that the use
of the perf BPF loader requires a newer libbpf, since bpf_program__set_insns()
touches libbpf objects internal state.
This affects only 'perf trace' when using bpf C code or pre-compiled
bytecode as an event.
Noticed on RHEL9, that has libbpf 0.7.0, where bpf_program__set_insns()
isn't available.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Sometimes, features are simply different flavors of another feature, to
properly detect the exact dependencies needed by different Linux
distributions.
For example, libbfd has three flavors: libbfd if the distro does not
require any additional dependency; libbfd-liberty if it requires libiberty;
libbfd-liberty-z if it requires libiberty and libz.
It might not be clear to the user whether a feature has been successfully
detected or not, given that some of its flavors will be set to OFF, others
to ON.
Instead, display only the feature main flavor if not in verbose mode
(VF != 1), and set it to ON if at least one of its flavors has been
successfully detected (logical OR), OFF otherwise. Omit the other flavors.
Accomplish that by declaring a FEATURE_GROUP_MEMBERS-<feature main flavor>
variable, with the list of the other flavors as variable value. For now, do
it just for libbfd.
In verbose mode, of if no group is defined for a feature, show the feature
detection result as before.
Committer testing:
Collecting the output from:
$ make -C tools/bpf/bpftool/ clean
$ make -C tools/bpf/bpftool/ |& grep "Auto-detecting system features" -A10
$ diff -u before after
--- before 2022-08-18 10:06:40.422086966 -0300
+++ after 2022-08-18 10:07:59.202138282 -0300
@@ -1,6 +1,4 @@
Auto-detecting system features:
... libbfd: [ on ]
-... libbfd-liberty: [ on ]
-... libbfd-liberty-z: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
$
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220818120957.319995-3-roberto.sassu@huaweicloud.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since now there are features with a long name, increase the room for them,
so that fields are correctly aligned.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20220818120957.319995-2-roberto.sassu@huaweicloud.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As the first eval expansion is used only to generate Makefile statements,
messages should not be displayed at this stage, as for example conditional
expressions are not evaluated.
It can be seen for example in the output of feature detection for bpftool,
where the number of detected features does not change, despite turning on
the verbose mode (VF = 1) and there are additional features to display.
Fix this issue by escaping the $ before $(info) statements, to ensure that
messages are printed only when the function containing them is actually
executed, and not when it is expanded.
In addition, move the $(info) statement out of feature_print_status, due to
the fact that is called both inside and outside an eval context, and place
it to the caller so that the $ can be escaped when necessary. For symmetry,
move the $(info) statement also out of feature_print_text, and place it to
the caller.
Force the TMP variable evaluation in verbose mode, to display the features
in FEATURE_TESTS that are not in FEATURE_DISPLAY.
Reorder perf feature detection messages (first non-verbose, then verbose
ones) by moving the call to feature_display_entries earlier, before the VF
environment variable check.
Also, remove the newline from that function, as perf might display
additional messages. Move the newline to perf Makefile, and display another
one if displaying the detection result is not deferred as in the case of
bpftool.
Committer testing:
Collecting the output from:
$ make VF=1 -C tools/bpf/bpftool/ |& grep "Auto-detecting system features" -A20
$ diff -u before after
--- before 2022-08-18 09:59:55.460529231 -0300
+++ after 2022-08-18 10:01:11.182517282 -0300
@@ -4,3 +4,5 @@
... libbfd-liberty-z: [ on ]
... libcap: [ on ]
... clang-bpf-co-re: [ on ]
+... disassembler-four-args: [ on ]
+... disassembler-init-styled: [ OFF ]
$
Fixes: 0afc5cad387db560 ("perf build: Separate feature make support into config/Makefile.feature")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20220818120957.319995-1-roberto.sassu@huaweicloud.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch to new EVP API for detecting libcrypto, as Fedora 36 returns an
error when it encounters the deprecated function MD5_Init() and the others.
The error would be interpreted as missing libcrypto, while in reality it is
not.
Fixes: 6e8ccb4f624a73c5 ("tools/bpf: properly account for libbfd variations")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220719170555.2576993-4-roberto.sassu@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
feature test"
This reverts commit 10fef869a58e37ec649b61eddab545f2da57a79b.
Because a proper fix was submitted.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While separate features have been defined to determine which linking flags
are required to use libbfd depending on the distribution (libbfd,
libbfd-liberty and libbfd-liberty-z), the same has not been done for other
features requiring linking to libbfd.
For example, disassembler-four-args requires linking to libbfd too, but it
should use the right linking flags. If not all the required ones are
specified, e.g. -liberty, detection will always fail even if the feature is
available.
Instead of creating new features, similarly to libbfd, simply retry
detection with the different set of flags until detection succeeds (or
fails, if the libraries are missing). In this way, feature detection is
transparent for the users of this building mechanism (e.g. perf), and those
users don't have for example to set an appropriate value for the
FEATURE_CHECK_LDFLAGS-disassembler-four-args variable.
The number of retries and features for which the retry mechanism is
implemented is low enough to make the increase in the complexity of
Makefile negligible.
Tested with perf and bpftool on Ubuntu 20.04.4 LTS, Fedora 36 and openSUSE
Tumbleweed.
Committer notes:
Do the retry for disassembler-init-styled as well.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20220719170555.2576993-1-roberto.sassu@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With OpenSSL v3 installed, the libcrypto feature check fails as it use the
deprecated MD5_* API (and is compiled with -Werror). The error message is
as follows.
$ make tools/perf
```
Makefile.config:778: No libcrypto.h found, disables jitted code injection,
please install openssl-devel or libssl-dev
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... libbfd: [ on ]
... libbfd-buildid: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ OFF ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
```
This is very confusing because the suggested library (on my Ubuntu 20.04
it is libssl-dev) is already installed. As the test only checks for the
presence of libcrypto, this commit suppresses the deprecation warning to
allow the test to pass.
Signed-off-by: Zixuan Tan <tanzixuan.me@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20220625153439.513559-1-tanzixuan.me@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature check does not seem important enough to display. Suggested by
Jiri Olsa.
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-3-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/{perf,bpf}, e.g. on debian unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
This commit adds a feature test to detect the new signature. Subsequent
commits will use it to fix the build failures.
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-2-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By adding a feature test for bpf_map_create() and providing a fallback if
it isn't present in older versions of libbpf.
This also fixes the build with torvalds/master at this point:
$ git log --oneline -5 torvalds/master
babf0bb978e3c9fc (torvalds/master) Merge tag 'xfs-5.19-for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
e375780b631a5fc2 Merge tag 'fsnotify_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
8b728edc5be16179 Merge tag 'fs_for_v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
3f306ea2e18568f6 Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
fbe86daca0ba878b Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
$
Coping with:
$ git log --oneline -2 d16495a982324f75
d16495a982324f75 libbpf: remove bpf_create_map*() APIs
e2371b1632b1c61c libbpf: start 1.0 development cycle
$
As the __weak function fails to build as it calls the now removed
bpf_create_map() API.
Testing:
$ rpm -q libbpf-devel
libbpf-devel-0.4.0-2.fc35.x86_64
$
$ make -C tools/perf BUILD_BPF_SKEL=1 LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin
$ cat /tmp/build/perf/feature/test-libbpf-bpf_map_create.make.output
test-libbpf-bpf_map_create.c: In function ‘main’:
test-libbpf-bpf_map_create.c:6:16: error: implicit declaration of function ‘bpf_map_create’; did you mean ‘bpf_map_freeze’? [-Werror=implicit-function-declaration]
6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */,
| ^~~~~~~~~~~~~~
| bpf_map_freeze
test-libbpf-bpf_map_create.c:6:87: error: expected expression before ‘,’ token
6 | return bpf_map_create(0 /* map_type */, NULL /* map_name */, 0, /* key_size */,
| ^
cc1: all warnings being treated as errors
$
$ objdump -dS /tmp/build/perf/perf | grep '<bpf_map_create>:' -A20
000000000058b290 <bpf_map_create>:
{
58b290: 55 push %rbp
58b291: 48 89 e5 mov %rsp,%rbp
58b294: 48 83 ec 10 sub $0x10,%rsp
58b298: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
58b29f: 00 00
58b2a1: 48 89 45 f8 mov %rax,-0x8(%rbp)
58b2a5: 31 c0 xor %eax,%eax
return bpf_create_map(map_type, key_size, value_size, max_entries, 0);
58b2a7: 48 8b 45 f8 mov -0x8(%rbp),%rax
58b2ab: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax
58b2b2: 00 00
58b2b4: 75 10 jne 58b2c6 <bpf_map_create+0x36>
}
58b2b6: c9 leave
58b2b7: 89 d6 mov %edx,%esi
58b2b9: 89 ca mov %ecx,%edx
58b2bb: 44 89 c1 mov %r8d,%ecx
return bpf_create_map(map_type, key_size, value_size, max_entries, 0);
58b2be: 45 31 c0 xor %r8d,%r8d
$
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/Yo+XvQNKL4K5khl2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By adding a feature test for btf__raw_data() and providing a fallback if
it isn't present in older versions of libbpf.
Committer testing:
$ rpm -q libbpf-devel
libbpf-devel-0.4.0-2.fc35.x86_64
$ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin
$ cat /tmp/build/perf/feature/test-libbpf-btf__raw_data.make.output
test-libbpf-btf__raw_data.c: In function ‘main’:
test-libbpf-btf__raw_data.c:6:9: error: implicit declaration of function ‘btf__raw_data’; did you mean ‘btf__get_raw_data’? [-Werror=implicit-function-declaration]
6 | btf__raw_data(NULL /* btf_ro */, NULL /* size */);
| ^~~~~~~~~~~~~
| btf__get_raw_data
cc1: all warnings being treated as errors
$ objdump -dS /tmp/build/perf/perf | grep '<btf__raw_data>:' -A20
00000000005b3050 <btf__raw_data>:
{
5b3050: 55 push %rbp
5b3051: 48 89 e5 mov %rsp,%rbp
5b3054: 48 83 ec 10 sub $0x10,%rsp
5b3058: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5b305f: 00 00
5b3061: 48 89 45 f8 mov %rax,-0x8(%rbp)
5b3065: 31 c0 xor %eax,%eax
return btf__get_raw_data(btf_ro, size);
5b3067: 48 8b 45 f8 mov -0x8(%rbp),%rax
5b306b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax
5b3072: 00 00
5b3074: 75 06 jne 5b307c <btf__raw_data+0x2c>
}
5b3076: c9 leave
return btf__get_raw_data(btf_ro, size);
5b3077: e9 14 99 e5 ff jmp 40c990 <btf__get_raw_data@plt>
5b307c: e8 af a7 e5 ff call 40d830 <__stack_chk_fail@plt>
5b3081: 66 66 2e 0f 1f 84 00 data16 cs nopw 0x0(%rax,%rax,1)
5b3088: 00 00 00 00
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
versions
By adding a feature test for bpf_object__next_map() and providing a fallback if
it isn't present in older versions of libbpf.
Committer testing:
$ rpm -q libbpf-devel
libbpf-devel-0.4.0-2.fc35.x86_64
$ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin
$ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_map.make.output
test-libbpf-bpf_object__next_map.c: In function ‘main’:
test-libbpf-bpf_object__next_map.c:6:9: error: implicit declaration of function ‘bpf_object__next_map’; did you mean ‘bpf_object__next’? [-Werror=implicit-function-declaration]
6 | bpf_object__next_map(NULL /* obj */, NULL /* prev */);
| ^~~~~~~~~~~~~~~~~~~~
| bpf_object__next
cc1: all warnings being treated as errors
$
$ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_map>:' -A20
00000000005b2e00 <bpf_object__next_map>:
{
5b2e00: 55 push %rbp
5b2e01: 48 89 e5 mov %rsp,%rbp
5b2e04: 48 83 ec 10 sub $0x10,%rsp
5b2e08: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5b2e0f: 00 00
5b2e11: 48 89 45 f8 mov %rax,-0x8(%rbp)
5b2e15: 31 c0 xor %eax,%eax
return bpf_map__next(prev, obj);
5b2e17: 48 8b 45 f8 mov -0x8(%rbp),%rax
5b2e1b: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax
5b2e22: 00 00
5b2e24: 75 0f jne 5b2e35 <bpf_object__next_map+0x35>
}
5b2e26: c9 leave
5b2e27: 49 89 f8 mov %rdi,%r8
5b2e2a: 48 89 f7 mov %rsi,%rdi
return bpf_map__next(prev, obj);
5b2e2d: 4c 89 c6 mov %r8,%rsi
5b2e30: e9 cb b1 e5 ff jmp 40e000 <bpf_map__next@plt>
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
libbpf versions
By adding a feature test for bpf_object__next_program() and providing a fallback if
it isn't present in older versions of libbpf.
Committer testing:
$ rpm -q libbpf-devel
libbpf-devel-0.4.0-2.fc35.x86_64
$ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin
$ cat /tmp/build/perf/feature/test-libbpf-bpf_object__next_program.make.output
test-libbpf-bpf_object__next_program.c: In function ‘main’:
test-libbpf-bpf_object__next_program.c:6:9: error: implicit declaration of function ‘bpf_object__next_program’; did you mean ‘bpf_object__unpin_programs’? [-Werror=implicit-function-declaration]
6 | bpf_object__next_program(NULL /* obj */, NULL /* prev */);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| bpf_object__unpin_programs
cc1: all warnings being treated as errors
$
$ objdump -dS /tmp/build/perf/perf | grep '<bpf_object__next_program>:' -A20
00000000005b2dc0 <bpf_object__next_program>:
{
5b2dc0: 55 push %rbp
5b2dc1: 48 89 e5 mov %rsp,%rbp
5b2dc4: 48 83 ec 10 sub $0x10,%rsp
5b2dc8: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5b2dcf: 00 00
5b2dd1: 48 89 45 f8 mov %rax,-0x8(%rbp)
5b2dd5: 31 c0 xor %eax,%eax
return bpf_program__next(prev, obj);
5b2dd7: 48 8b 45 f8 mov -0x8(%rbp),%rax
5b2ddb: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax
5b2de2: 00 00
5b2de4: 75 0f jne 5b2df5 <bpf_object__next_program+0x35>
}
5b2de6: c9 leave
5b2de7: 49 89 f8 mov %rdi,%r8
5b2dea: 48 89 f7 mov %rsi,%rdi
return bpf_program__next(prev, obj);
5b2ded: 4c 89 c6 mov %r8,%rsi
5b2df0: e9 3b b4 e5 ff jmp 40e230 <bpf_program__next@plt>
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By adding a feature test for bpf_prog_load() and providing a fallback if
it isn't present in older versions of libbpf.
Committer testing:
$ rpm -q libbpf-devel
libbpf-devel-0.4.0-2.fc35.x86_64
$ make -C tools/perf LIBBPF_DYNAMIC=1 O=/tmp/build/perf install-bin
$ cat /tmp/build/perf/feature/test-libbpf-bpf_prog_load.make.output
test-libbpf-bpf_prog_load.c: In function ‘main’:
test-libbpf-bpf_prog_load.c:6:16: error: implicit declaration of function ‘bpf_prog_load’ [-Werror=implicit-function-declaration]
6 | return bpf_prog_load(0 /* prog_type */, NULL /* prog_name */,
| ^~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ objdump -dS /tmp/build/perf/perf | grep '<bpf_prog_load>:' -A20
00000000005b2d70 <bpf_prog_load>:
{
5b2d70: 55 push %rbp
5b2d71: 48 89 ce mov %rcx,%rsi
5b2d74: 4c 89 c8 mov %r9,%rax
5b2d77: 49 89 d2 mov %rdx,%r10
5b2d7a: 4c 89 c2 mov %r8,%rdx
5b2d7d: 48 89 e5 mov %rsp,%rbp
5b2d80: 48 83 ec 18 sub $0x18,%rsp
5b2d84: 64 48 8b 0c 25 28 00 mov %fs:0x28,%rcx
5b2d8b: 00 00
5b2d8d: 48 89 4d f8 mov %rcx,-0x8(%rbp)
5b2d91: 31 c9 xor %ecx,%ecx
return bpf_load_program(prog_type, insns, insn_cnt, license,
5b2d93: 41 8b 49 5c mov 0x5c(%r9),%ecx
5b2d97: 51 push %rcx
5b2d98: 4d 8b 49 60 mov 0x60(%r9),%r9
5b2d9c: 4c 89 d1 mov %r10,%rcx
5b2d9f: 44 8b 40 1c mov 0x1c(%rax),%r8d
5b2da3: e8 f8 aa e5 ff call 40d8a0 <bpf_load_program@plt>
}
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The btf__load_from_kernel_by_id() only takes one arg, not two.
Committer notes:
I tested it just with an older libbpf, one where
btf__load_from_kernel_by_id() wasn't introduced yet.
A test with a newer dynamic libbpf would fail because the
btf__load_from_kernel_by_id() is there, but takes just one arg.
Fixes: 0ae065a5d265bc5a ("perf build: Fix check for btf__load_from_kernel_by_id() in libbpf")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/linux-perf-users/YozLKby7ITEtchC9@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.
Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.
Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:
$ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
6 | return btf__load_from_kernel_by_id(20151128, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
00000000005ba180 T btf__load_from_kernel_by_id
$
$ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf
/tmp/build/perf-urgent/perf: file format elf64-x86-64
<SNIP>
00000000005ba180 <btf__load_from_kernel_by_id>:
#include "record.h"
#include "util/synthetic-events.h"
#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
struct btf *btf__load_from_kernel_by_id(__u32 id)
{
5ba180: 55 push %rbp
5ba181: 48 89 e5 mov %rsp,%rbp
5ba184: 48 83 ec 10 sub $0x10,%rsp
5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5ba18f: 00 00
5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp)
5ba195: 31 c0 xor %eax,%eax
struct btf *btf;
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
int err = btf__get_from_id(id, &btf);
5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi
5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt>
5ba1a0: 89 c2 mov %eax,%edx
#pragma GCC diagnostic pop
return err ? ERR_PTR(err) : btf;
5ba1a2: 48 98 cltq
5ba1a4: 85 d2 test %edx,%edx
5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax
}
<SNIP>
Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.
Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
In file included from util/scripting-engines/trace-event-perl.c:35:
In file included from /usr/lib64/perl5/CORE/perl.h:4085:
In file included from /usr/lib64/perl5/CORE/hv.h:659:
In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^~~~~~~~~~
/usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
v ^= (v>>23); \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
} STMT_END
^~~~~~~~
/usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
# define STMT_END )
^
Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:
<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?
Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:
https://github.com/Perl/perl5/issues/18780
https://github.com/Perl/perl5/pull/18984
If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>
Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Just like its done for ldopts and for both in tools/perf/Makefile.config.
Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using:
$(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS))
And we need to do it to allow for building with versions of clang where
some gcc options selected by distros are not available.
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
To pick up fixes and get in line with other trees, powerpc kernel
mostly this time, but BPF as well.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tools build system uses KBUILD_HOSTCFLAGS symbol for obvious purposes.
However this is not set for anything under tools/
As such, host tools apps built have no compiler warnings enabled.
Declare HOSTCFLAGS for perf tools build, and also use that symbol in
declaration of host_c_flags. HOSTCFLAGS comes from EXTRA_WARNINGS, which
is independent of target platform/arch warning flags.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1635525041-151876-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
test-all fast path
Since 66dfdff03d196e51 ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:
$ find tools/ -type f | xargs grep feature-libpython-version
$
The only place where this was used was removed in 66dfdff03d196e51:
- ifneq ($(feature-libpython-version), 1)
- $(warning Python 3 is not yet supported; please set)
- $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
- $(warning If you also have Python 2 installed, then)
- $(warning try something like:)
- $(warning $(and ,))
- $(warning $(and ,) make PYTHON=python2)
- $(warning $(and ,))
- $(warning Otherwise, disable Python support entirely:)
- $(warning $(and ,))
- $(warning $(and ,) make NO_LIBPYTHON=1)
- $(warning $(and ,))
- $(error $(and ,))
- else
- LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LANG_BINDINGS += $(obj-perf)python/perf.so
- $(call detected,CONFIG_LIBPYTHON)
- endif
And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.
But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:
$ rpm -qa | grep python.*devel
python3-devel-3.9.7-1.fc34.x86_64
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
$
As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.
With this:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin |& head
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
$ cat /tmp/build/perf/feature/test-all.make.output
$
Reviewed-by: James Clark <james.clark@arm.com>
Fixes: 66dfdff03d196e51 ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add the __NR_bpf definitions to fix the following build errors for mips:
$ cd tools/bpf/bpftool
$ make
[...]
bpf.c:54:4: error: #error __NR_bpf not defined. libbpf does not support your arch.
# error __NR_bpf not defined. libbpf does not support your arch.
^~~~~
bpf.c: In function ‘sys_bpf’:
bpf.c:66:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
[...]
In file included from gen_loader.c:15:0:
skel_internal.h: In function ‘skel_sys_bpf’:
skel_internal.h:53:17: error: ‘__NR_bpf’ undeclared (first use in this function); did you mean ‘__NR_brk’?
return syscall(__NR_bpf, cmd, attr, size);
^~~~~~~~
__NR_brk
We can see the following generated definitions:
$ grep -r "#define __NR_bpf" arch/mips
arch/mips/include/generated/uapi/asm/unistd_o32.h:#define __NR_bpf (__NR_Linux + 355)
arch/mips/include/generated/uapi/asm/unistd_n64.h:#define __NR_bpf (__NR_Linux + 315)
arch/mips/include/generated/uapi/asm/unistd_n32.h:#define __NR_bpf (__NR_Linux + 319)
The __NR_Linux is defined in arch/mips/include/uapi/asm/unistd.h:
$ grep -r "#define __NR_Linux" arch/mips
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 4000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 5000
arch/mips/include/uapi/asm/unistd.h:#define __NR_Linux 6000
That is to say, __NR_bpf is:
4000 + 355 = 4355 for mips o32,
6000 + 319 = 6319 for mips n32,
5000 + 315 = 5315 for mips n64.
So use the GCC pre-defined macro _ABIO32, _ABIN32 and _ABI64 [1] to define
the corresponding __NR_bpf.
This patch is similar with commit bad1926dd2f6 ("bpf, s390: fix build for
libbpf and selftest suite").
[1] https://gcc.gnu.org/git/?p=gcc.git;a=blob;f=gcc/config/mips/mips.h#l549
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1637804167-8323-1-git-send-email-yangtiezhu@loongson.cn
|
|
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
test-all.c: In function ‘main’:
test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
203 | main_test_sync_compare_and_swap(argc, argv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
Fix it, now to figure out what is that test-libpython-version.c
problem...
Fixes: 60fa754b2a5a4e0c ("tools: Remove feature-sync-compare-and-swap feature detection")
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
LLVM 9 (current release is LLVM 13) moved the minimum C++ version to
GNU++14. Bump the version numbers in the feature test and perf build.
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20211012021321.291635-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit cbefd24f0aee3a5d ("tools build: Add test to check if slang.h is
in /usr/include/slang/") added a proper test to check whether slang.h is
in a subdirectory, and commit 1955c8cf5e26b1f7 ("perf tools: Don't
hardcode host include path for libslang") removed the include path for
test-libslang.bin but missed test-all.bin.
Apply the same change to test-all.bin.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang")
Signed-off-by: John Keeping <john@metanate.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211025172314.3766032-1-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently libtracefs isn't used by perf, but there are potential
improvements by using it as identified Steven Rostedt's e-mail:
https://lore.kernel.org/lkml/20210610154759.1ef958f0@oasis.local.home/
This change is modelled on the dynamic libtraceevent patch by Michael
Petlan:
https://lore.kernel.org/linux-perf-users/20210428092023.4009-1-mpetlan@redhat.com/
v3. Adds file missed in v1 and v2 spotted by Jiri Olsa.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210923001024.550263-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
OpenCSD v1.1.1 has a bug fix for the installation of the ETE decoder
headers. This also means that including headers separately for each
decoder is unnecessary so remove these.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-7-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently the clean target when using O= isn't cleaning the feature
detect output. This is because O= and OUTPUT= are set to canonical
paths. For example in tools/perf/Makefile:
FULL_O := $(shell cd $(PWD); readlink -f $(O) || echo $(O))
This means that OUTPUT ends in a / and most usages prepend it to a file
without adding an extra /. This line that was changed adds an extra /
before the 'feature' folder but not to the end, resulting in a clean
command like this:
rm -f /tmp/build//featuretest-all.bin ...
After the change the clean command looks like this:
rm -f /tmp/build/feature/test-all.bin ...
Fixes: 762323eb39a257c3 ("perf build: Move feature cleanup under tools/build")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20210816130705.1331868-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Since the __sync functions have been removed from perf, it's needless
for perf tool to test the feature sync-compare-and-swap.
The feature test is not used by any other components, remove it.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: coresight@lists.linaro.org
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210809111407.596077-10-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
