| Age | Commit message (Collapse) | Author |
|---|
|
Dan reported that smatch reports wrong size check and after analysis it
is confirmed that we are comparing wrong value: pointer size instead of
array size. However the check itself is problematic as in UAPI header
there are two fields:
struct snd_soc_tplg_enum_control {
(...)
char texts[SND_SOC_TPLG_NUM_TEXTS][SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
__le32 values[SND_SOC_TPLG_NUM_TEXTS * SNDRV_CTL_ELEM_ID_NAME_MAXLEN / 4];
the texts field is for names and the values one for values assigned to
those named fields, after analysis it becomes clear that there is quite
a lot overhead values than we may possibly name. So instead of changing
check to ARRAY_SIZE(ec->values), as it was first suggested, use
hardcoded value of SND_SOC_TPLG_NUM_TEXTS.
Link: https://lore.kernel.org/alsa-devel/X9B0eDcKy+9B6kZl@mwanda/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we parse "values" we perform check if there is correct number of
them. However similar check is missing in case of "texts", add it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201210152541.191728-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The condition boot_iteration == HDA_FW_BOOT_ATTEMPTS to determine
the log level for the DSP status dump would only work in the case of DSP
init failure after maximum number of attempts to initialize the DSP. If
DSP init succeeds in less than HDA_FW_BOOT_ATTEMPTS attempts and FW
loading fails, the ROM status dump would end up getting logged as debug
instead of an error.
So, add a new flag, SOF_DBG_DUMP_LOG_ERROR, to explicitly specify
the log level for DSP status dump.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SOF_DBG_* macros are used for dual purposes right now, for the
sof_core_debug module parameter and for the dbg_dump() ops. So, separate
these two types of flags into different types to avoid confusion.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the duplicate status dump in case DSP init fails. The core will
be powered down in this case and the status dump will be invalid anyway.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211100743.3188821-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
RT1015p needs 300ms delay after SDB pulling high for internal
calibration during the power on sequence.
Delays 300ms right before data sends out to avoid data truncated.
Assuming the calibration state gets lost after system suspend.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Moves SDB control from DAI ops trigger to DAPM. As long as BCLK
and LRCLK are ready, SDB can be toggled earlier.
Changes from using gpiod_set_value() to gpiod_set_value_cansleep()
because it executes in non-atomic context.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201211051224.2307349-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current channel-map control implementation in USB-audio driver may
lead to an error message like
"control 3:0:0:Playback Channel Map:0: access overflow"
when CONFIG_SND_CTL_VALIDATION is set. It's because the chmap get
callback clears the whole array no matter which count is set, and
rather the false-positive detection.
This patch fixes the problem by clearing only the needed array range
at usb_chmap_ctl_get().
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201211130048.6358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The debug prints from patch_hdmi.c are not aligned with HDA common code
in hda_codec.c nor with other HDA codec drivers.
To align with rest of the codebase, use hexadecimal formatting whenever
printing value of a HDA NID. Also refer to NIDs with capital letters in
traces as is done other modules. This presentation is also aligned with
the formatting used in HDA codec procfs entry.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201211124547.3243871-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add supported for more Lenovo ALC285 Headset Button.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/bb1f1da1526d460885aa4257be81eb94@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that the DSP's audio configuration is understood, remove previous
hacky methods of trying to properly configure it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-6-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make sure that the DSP has no DMA channels allocated once the firmware
is downloaded, and that the default audio streams in use by the DSP are
setup in the correct order.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-5-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add functions for both reading and writing to the 8051's exram. Also,
add a little bit of documentation on how the addresses are segmented.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-4-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add function for remapping a ChipIO stream's ports. Also include some
documentation as to how this works.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-3-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Reset the codec upon initialization to clear out anything that may have
been setup on a previous boot into Windows, or in case of an improper
shutdown.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201210160658.461739-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A problem exists in enabling silent stream when connection type is
DisplayPort. Silent stream programming is completed when a new DP
receiver is connected, but infoframe transmission does not actually
start until PCM is opened for the first time. This can result in audible
gap of multiple seconds. This only affects the first PCM open.
Fix the issue by properly assigning a converter to the silent stream,
and modifying the required stream ID programming sequence.
This change only affects Intel display audio codecs.
BugLink: https://github.com/thesofproject/linux/issues/2468
Fixes: 951894cf30f4 ("ALSA: hda/hdmi: Add Intel silent stream support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201210174445.3134104-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the Input Source enumerated control's strings to make it play
nice with pulseaudio.
Fixes: 7cb9d94c05de9 ("ALSA: hda/ca0132: add alt_select_in/out for R3Di + SBZ")
Cc: <stable@kernel.org>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201208195223.424753-2-conmanx360@gmail.com
Link: https://lore.kernel.org/r/20201210173550.2968-2-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Windows driver sets the pincfg for the AE-5's rear-headphone to
report as a microphone. This causes issues with Pulseaudio mistakenly
believing there is no headphone plugged in. In Linux, we should instead
set it to be a headphone.
Fixes: a6b0961b39896 ("ALSA: hda/ca0132 - fix AE-5 pincfg")
Cc: <stable@kernel.org>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Link: https://lore.kernel.org/r/20201208195223.424753-1-conmanx360@gmail.com
Link: https://lore.kernel.org/r/20201210173550.2968-1-conmanx360@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It seems that the HD-audio clear and reconfig sysfs don't work any
longer after the recent driver core change. There are multiple issues
around that: the linked list corruption and the dead device handling.
The former issue is fixed by another patch for the driver core itself,
while the latter patch needs to be addressed in HD-audio side.
This patch corresponds to the latter, it recovers those broken
functions by replacing the device detach and attach actions with the
standard core API functions, which are almost equivalent with unbind
and bind actions.
Fixes: 654888327e9f ("driver core: Avoid binding drivers to dead devices")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209207
Link: https://lore.kernel.org/r/20201209150119.7705-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a driver for simple mux driven by gpios. It currently only supports one
gpio, muxing one of two inputs to a single output.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201205001508.346439-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Expand SOF support for Alder Lake by adding ACPI machine tables
for ADL-S systems with SoundWire codecs. Modify kernel config
to choose SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE for these
platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Initial support for ADL w/ RT711
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201209153102.3028310-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Users reported that some Lenovo AMD platforms do not have ACP microphone,
but the BIOS advertises it via ACPI.
This patch create a simple DMI table, where those machines with the broken
BIOS can be added. The DMI description for Lenovo IdeaPad 5 and
IdeaPad Flex 5 devices are added there.
Also describe the dmic_acpi_check kernel module parameter in a more
understandable way.
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208171200.2737620-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
<kuninori.morimoto.gx@renesas.com>:
Hi Mark
These are focusing to trigger function,
which can be cleanup, tidyup.
Kuninori Morimoto (2):
ASoC: soc-pcm: remove dpcm_do_trigger()
ASoC: soc-pcm: care trigger rollback
include/sound/soc-component.h | 3 +-
include/sound/soc-dai.h | 4 +-
include/sound/soc-link.h | 3 +-
include/sound/soc.h | 1 +
sound/soc/soc-component.c | 45 ++++++++++++++++++----
sound/soc/soc-dai.c | 44 +++++++++++++++++----
sound/soc/soc-link.c | 30 ++++++++++++++-
sound/soc/soc-pcm.c | 72 ++++++++++++++++++++---------------
8 files changed, 152 insertions(+), 50 deletions(-)
--
2.25.1
|
|
In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is simply no reason to do that.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-4-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use regmap_{set,clear}_bits instead of regmap_update_bits, when
applicable.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).
int dpcm_be_dai_trigger(...)
{
for_each_dpcm_be(fe, stream, dpcm) {
(B) ...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_RESUME:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_STOP:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_SUSPEND:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
...
(1) ret = dpcm_do_trigger(...);
...
}
}
}
But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.
static int dpcm_do_trigger(...)
{
int ret;
(A) dev_dbg(...);
ret = soc_pcm_trigger(substream, cmd);
if (ret < 0)
(C) dev_err(...);
return ret;
}
This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Raven and Renoir ACP can be distinguished by the PCI revision.
Let's do the check very early, otherwise the wrong probe code
can be run.
Link: https://lore.kernel.org/alsa-devel/2e4587f8-f602-cf23-4845-fd27a32b1cfc@amd.com/
Cc: <stable@kernel.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201208181233.2745726-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These error paths return success but they should return -EINVAL.
Fixes: 97ed3e509ee6 ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset
microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
To help in debugging issues with DisplayPort Multi-Stream Transport (aka
DP-MST) support, print information of active connections for each device
of a display audio pin widget.
Example output with the patch with two monitors connected to a DP-MST hub:
Devices: 4
Dev 00: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Dev 01: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
*Dev 02: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03 0x05* 0x07 0x09 ]
Dev 03: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Connection: 4
0x03 0x05* 0x07 0x09
Format of existing "Connection:" entry is left intact to keep
compatibility.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201208185736.2877541-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
sof-audio-acpi" from Hans de Goede <hdegoede@redhat.com>:
Hi All,
Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.
Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.
I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.
These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.
Regards,
Hans
|
|
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes: bb24a31ed584 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!
Fix it by renaming the secondary streams to unique names.
Fixes: a497a4363706 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.
Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.
When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.
Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.
The new sequence would be:
soc_pcm_prepare()
-> SND_SOC_DAPM_STREAM_START
soc_pcm_hw_free()
-> soc_pcm_hw_free()
-> SND_SOC_DAPM_STREAM_STOP
dpcm_fe_dai_shutdown()
-> SND_SOC_DAPM_STREAM_STOP
Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.
Fixes: a27b421f1d04 ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASUS laptop X430UN with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207072755.16210-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The runtime->avail field may be accessed concurrently while some
places refer to it without taking the runtime->lock spinlock, as
detected by KCSAN. Usually this isn't a big problem, but for
consistency and safety, we should take the spinlock at each place
referencing this field.
Reported-by: syzbot+a23a6f1215c84756577c@syzkaller.appspotmail.com
Reported-by: syzbot+3d367d1df1d2b67f5c19@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083527.21163-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
