summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2007-10-16[ALSA] fix bootup crash in snd_gus_interrupt()Ingo Molnar
when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Fix SKU ID function for realtek codecsKailang Yang
Fixed SKU ID function for realtek codecs. It's used by the automatic BIOS configuration mode. Now it supports the correct jack-detection mechanism, too. Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Support ASUS P701 eeepc [0x1043 0x82a1] supportKailang Yang
Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Add array terminator for dmic in STAC codecTakashi Iwai
Reported by Jan-Marek Glogowski. The dmic array is passed to snd_hda_parse_pin_def_config() and should be zero-terminated. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hdsp - Fix zero divisionTakashi Iwai
Fix zero-division bug in the calculation dds offset. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] usb-audio - Fix double commentTakashi Iwai
Remove superfluous comment line (maybe a merge failure). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Fix STAC922x volume knob controlTakashi Iwai
Reported by zhejiang <zhe.jiang@intel.com> 'I found that STAC_VOLKNOB hardwired the KNOB nid to 0x24. It is okay for stac9205 and stac927x. But the VolumeKnob nid of stac9220-9221 is 0x16.' Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16[ALSA] hda-codec - Fix for Fujitsu Lifebook C1410Takashi Iwai
Fixed ALC262 fujitsu model to support Fujitsu Lifebook C1410 properly. It requires EAPD and has separate int/ext mic inputs (which was missing in the current driver). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] mpu-401: remove MPU401_INFO_UART_ONLY flagClemens Ladisch
Since the last patch made the ENTER_UART command optional, the enter_uart option and its corresponding flag have become superfluous. The uart_enter option remains for backward compatibility but just prints a warning when used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] mpu-401: do not require an ACK byte for the ENTER_UART commandClemens Ladisch
The original MPU-401 does not send an ACK byte after processing the ENTER_UART command, so we better do not try to wait for it. Many clones get this wrong and do send an ACK, but when interpreting it as MIDI, it is just a harmless Active Sensing message, and it is likely to be read and discarded by the interrupt handler before the MIDI input device is triggered. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] via82xx - Add DXS quirk for Shuttle AK31v2Takashi Iwai
Shuttle AK31v2 works well with dxs_support=5 (ALSA bug#2926). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix input_mux numbers for vaio stac92xxTakashi Iwai
My bad, I forgot to update the num_items field when added a new item to vaio_mux items table, so the last item 'PCM' disappeared. Now it has the right number 3. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Re-add quirk support for Dell XPS 1330 and Inspiron 1420Tim Gardner
Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] pcxhr - Fix dB level informationTakashi Iwai
Some dB level information is wrong in pcxhr driver according to the datasheet. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix Gateway laptops with STAC9200Takashi Iwai
Fix the output of Gateway laptops with STAC9200 codec chip. They require the EAPD control for some pins. These pins shouldn't be powered down. To enable EAPD control, a new model 'gateway' was added to STAC9200. The known PCI SSIDs are included in the quirk list. The fix was originally suggested by Brian Hinz, in ALSA bug#2948. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Add zero checks in input-mux helper functionsTakashi Iwai
Added zero checks in input-mux helper functions to avoid Oops. Some devices may have no input pins while the driver registers control elements calling these functions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sound: snd_register_device_for_dev fixMariusz Kozlowski
snd_register_device_for_dev() can oops when device_create() returns ERR_PTR(err). Scenario: preg->dev = device_create(...); /* fails */ if (preg->dev) /* contains ERR_PTR(err) */ dev_set_drvdata(preg->dev, private_data); and dev_set_drvdata() looks like this: static inline void dev_set_drvdata (struct device *dev, void *data) { dev->driver_data = data; <--- boom } This patch should prevent that. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] snd-usb-audio: Add basic support for E-Mu USB devices.James Courtier-Dutton
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] git-alsa kconfig fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sound/hda: fix help textRandy Dunlap
Fix hda help text typo. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] alsa: Add the MCP79 support to hda_intel driverPeer Chen
Add the MCP79 support to hda driver. The patch base on kernel 2.6.23-rc7 Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Workaround for invalid signature read of CS8427Takashi Iwai
Reading the signature of CS8427 over SPI/I2C fails on some devices by mysterious reason. In most cases, however, it succeeds at the sequential read. So, let's give a second chance to check the signature again. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Missing support ASUS A7JKailang Yang
Added the missing support for ASUS A7J [0x1043 0x1243] Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec - Fix ALC662 codec supportKailang Yang
* Fixed ALC662 init verbs (wrong NIDs) * Fixed ALC662 auto model issue (wrong DAC index) Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848: simplify MCE down codeTrent Piepho
The polling loop to check for ACI to go down was more convoluted than it needed to be. New loop should be more efficient and it is a lot simpler. The old loop checked for a timeout before checking for ACI down, which could result in an erroneous timeout. It's only a failure if the timeout expires _and_ ACI is still high. There is nothing wrong with the timeout expiring while the task is sleeping if ACI went low. A polling loop to check for the device to leaving INIT mode is removed. The device must have already left init for the previous ACI loop to have finished. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848: Fix msleep while atomicTrent Piepho
Simplest fix. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ac97: YMF743 missing controls support (2/2)Keita Maehara
These patches enable a few YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The second one contains following changes: - A chip-specific SPDIF support for YMF743 (It doesn't have AC97 standard SPDIF registers seen on YMF753). - The implementation for 'IEC958 Playback Source' and 'IEC958 Mute' are identical to the ones for YMF753. But there is no 'IEC958 Output Pin' for YMF743. Signed-off-by: Keita Maehara <maehara@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ac97: YMF743 missing controls support (1/2)Keita Maehara
These patches enable some YMF743 controls (Tone/3D/IEC958) that won't be detected with the current version of ALSA. The first one contains only cosmetic changes to share a few YMF753-specific symbols with YMF743. Signed-off-by: Keita Maehara <maehara@debian.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] schedule_timeout() fix for core/seq/seq_instr.cRene Herman
Replace schedule_timeout() with schedule_timeout_uninterruptible() to avoid signals in loop. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] alsa-kernel: schedule_timeout() fixesRene Herman
Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda: More subsystem id BIOS changesMatthew Ranostay
More laptop BIOS changes the subsystem id for STAC9205 cards if the microphone is toggled on/off in the settings. The patch removes the old STAC_9205_M43xx and use STAC_9205_DELL_M43. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Add default values for power-saving as Kconfig optionsTakashi Iwai
Added CONFIG_SND_AC97_POWER_SAVE_DEFAULT and CONFIG_SND_HDA_POWER_SAVE_DEFAULT Kconfig options as the default values for power-saving mode of AC97 and HD-audio drivers, respectively. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sscape: support for audio part of VIVO cardsKrzysztof Helt
This patch adds support for audio part of the Ensoniq SoundScape VIVO cards. The MIDI part is not supported. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] opti9xx: adjust OPL3 FM resource valueTakashi Iwai
The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through pnp and put their on-chip OPL3 at +8. The driver assumes the provided value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, which means that simply adding 8 to the pnp provides value works to fix detection of both OPL3 and OPL4. Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 925 (together all OPTi ISA-PnP chips) by me. Signed-off-by; Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sscape: driver extension to 2nd DMA and WSS portKrzysztof Helt
This patch adds second DMA channel and WSS port settings to the sscape driver. Also, it adds internal card type setting. The Ensoniq SoundScape VIVO PnP id is added but not handled yet. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] caiaq - support for Native Instrument's RigKontrol3Daniel Mack
This patch adds support for Native Instrument's upcoming RigKontrol3 sound interface. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sc6000: 2 minor fixesKrzysztof Helt
This patch zeroes buffer for the card name and fixes incorrect jump in the probe function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Routines for effect processor FX8010: Use list_for_each_entryMatthias Kaehlcke
Routines for effect processor FX8010: Use list_for_each_entry instead of list_for_each Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] Intel HD Audio: Use list_for_each_entry(_safe)Matthias Kaehlcke
Intel HD Audio: Use list_for_each_entry(_safe) instead of list_for_each(_safe) Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entryMatthias Kaehlcke
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of list_for_each Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] ad1848_lib: waiting loops done after cs4231_libKrzysztof Helt
This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] sc6000 build fixAndrew Morton
sound/isa/sc6000.c: In function 'sc6000_dsp_reset': sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay' sound/isa/sc6000.c: In function 'sc6000_init_mss': sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep' {standard input}: Assembler messages: Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] echoaudio - Add barrier() to prevent compiler optimizationGiuliano Pochini
This patch adds a barrier() to prevent the compiler from moving the read outside of the loop. It also fixes a comment. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec: Add two new systems to ALC883Tobin Davis
This patch adds support for the Asus M2A-VM HDMI and Abit IP35-PRO motherboards. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] hda-codec: Add 4 channel support for Realtek ALC883Tobin Davis
I had a request for a 4 channel mode. This should implement front and surround outputs, leaving the 3rd plug for mic input. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix distortion on rear channelsClemens Ladisch
When playing multichannel data, the rear channels can get distorted if the last sample of the last played stereo stream was not zero. To avoid this, add a hack to play a few silence samples after the stream is stopped. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: clean up struct cmipci_pcmClemens Ladisch
Remove some unused field from the struct cmipci_pcm, and change the type of some others to save some space. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: fix lookup of double ratesClemens Ladisch
When using one of the double sampling rates, use half the sample rate to look up in the rates[] table, otherwise we stumble over the BUG(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16[ALSA] cmipci: reorganize set_dac_channels()Clemens Ladisch
By reorganizing the code that sets the CHB3DxC bits we can not only simplify this code but also fix the bug where the CHB3D8C bit was not reset when playing a stereo stream after a 7.1 stream. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-26 19:10:43 +0000