summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)Author
2024-05-16ALSA: usb-audio: Fix for sampling rates support for Mbox3Manuel Barrio Linares
Fixed wrong use of usb_sndctrlpipe to usb_rcvctrlpipe Fixes: 44f69ddccb66 ("ALSA: usb-audio: Add sampling rates support for Mbox3") Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com> Link: https://lore.kernel.org/r/20240516134003.39104-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-12ALSA: scarlett2: Increase mixer range to +12dBGeoffrey D. Bennett
The values loaded into the mixer are 16-bit values, with 8192 representing 0dB, going up to a current maximum of 16345 (+6dB). All supported interfaces have no problem going up to 32612 (+12dB), so update SCARLETT2_MIXER_MAX_DB and scarlett2_mixer_values[] to allow for this. Tested with: - Scarlett 2nd Gen 6i6, 18i8, 18i20 - Scarlett 3rd Gen 4i4, 8i6, 18i8, 18i20 - Scarlett 4th Gen Solo, 2i2, 4i4 - Clarett+ 2Pre, 4Pre, 8Pre - Vocaster One and Two Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/Zj+gYT4F2XeKTD93@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-12ALSA: scarlett2: Add S/PDIF source selection controlsGeoffrey D. Bennett
Add S/PDIF Source/Digital I/O Mode selection controls for the Scarlett 3rd Gen 18i8/18i20 and Clarett 4Pre/8Pre interfaces. These models have both coax S/PDIF and optical inputs, and the optical inputs are switchable between being used as S/PDIF and ADAT inputs. The Scarlett 3rd Gen 18i20 also has a "Dual ADAT" mode for 8-channel audio at 88.2/96kHz. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Link: https://lore.kernel.org/r/Zj8zCTjzPsTDENN+@m.b4.vu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-09ALSA: usb-audio: Add name for HP Engage Go dockSteven 'Steve' Kendall
This dock previously presented as 'generic USB Audio'. UCM may now be applied specific to this dock. Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org> Link: https://lore.kernel.org/r/20240508-usb-audio-hp-engage-go-dock-v1-1-9e2984d49e63@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-05-08ALSA: usb: Use *-y instead of *-objs in MakefileTakashi Iwai
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20240507135513.14919-6-tiwai@suse.de
2024-05-08ALSA: usb-audio: Add sampling rates support for Mbox3Manuel Barrio Linares
This adds support for all sample rates supported by the hardware,Digidesign Mbox 3 supports: {44100, 48000, 88200, 96000} Fixes syncing clock issues that presented as pops. To test this, without this patch playing 440hz tone produces pops. Clock is now synced between playback and capture interfaces so no more latency drift issue when using pipewire pro-profile. (https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3900) Signed-off-by: Manuel Barrio Linares <mbarriolinares@gmail.com> Link: https://lore.kernel.org/r/20240430171020.192285-1-mbarriolinares@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-21ALSA: scarlett2: Zero initialize ret in scarlett2_ag_target_ctl_get()Nathan Chancellor
Clang warns (or errors with CONFIG_WERROR): sound/usb/mixer_scarlett2.c:3697:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] 3697 | if (private->autogain_updated) { | ^~~~~~~~~~~~~~~~~~~~~~~~~ sound/usb/mixer_scarlett2.c:3707:9: note: uninitialized use occurs here 3707 | return err; | ^~~ sound/usb/mixer_scarlett2.c:3697:2: note: remove the 'if' if its condition is always true 3697 | if (private->autogain_updated) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/usb/mixer_scarlett2.c:3688:9: note: initialize the variable 'err' to silence this warning 3688 | int err; | ^ | = 0 1 error generated. Initialize ret to zero to ensure ret is initialized in all paths within scarlett2_ag_target_ctl_get(), which matches the style of other functions in this driver. Fixes: e30ea5340c25 ("ALSA: scarlett2: Add autogain target controls") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Message-ID: <20240419-alsa-scarlett2-fix-wsometimes-uninitialized-v1-1-e2ace8642e08@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-18ALSA: scarlett2: Add Bluetooth volume control for Vocaster TwoGeoffrey D. Bennett
The Vocaster Two has a Bluetooth module with a volume control. Add a corresponding ALSA mixer control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <b78687f7243142a4466f63c0aee9742b44ee395d.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add autogain target controlsGeoffrey D. Bennett
The Scarlett 4th Gen and Vocaster interfaces allow the autogain target dBFS value(s) to be configured. Add Mean and Peak Target controls for 4th Gen, and a Hot Target control for Vocaster. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <33d7f6dc965ab09522361ec99745a0685e4b8272.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for Focusrite Vocaster One and TwoGeoffrey D. Bennett
Add Focusrite Vocaster One and Two USB IDs, notification arrays, config sets, and device info data. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <5fb48555a8db7bb322b25784b165829357cd6e42.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add DSP controlsGeoffrey D. Bennett
Add filter and compressor DSP controls for the Vocaster interfaces. Mark scarlett2_notify_input_dsp() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <a45316f79600b862dae38da24f13def638b06476.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add input mute controlsGeoffrey D. Bennett
Add controls for the input mute switches that the Vocaster interfaces have. Mark scarlett2_notify_input_mute() as __always_unused until it gets used when the Vocaster callback function array is added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <3b384b4e759241bd06f0c223e9f4f00467d88318.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Define autogain status texts per-config-setGeoffrey D. Bennett
The autogain status texts are different for Vocaster vs. Scarlett 4th Gen, so make them configurable per-config-set. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <b1adcd3dc48117d4ebe16812eeb7f1dbf1ede472.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Define the maximum preamp input gain per-config-setGeoffrey D. Bennett
Remove the #define SCARLETT2_MAX_GAIN_DB and replace with a per-config-set TLV as the Vocaster has a maximum gain of 70dB vs the 4th Gen 69dB. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <ade8e18ce38927ea0224946ec7cfea23ad3793d8.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add additional input configuration parametersGeoffrey D. Bennett
The 4th Gen Scarlett interfaces added software-controllable input gain along with channel select, channel link, auto-gain, and "safe" mode. Vocaster has software-controllable input gain and auto-gain but not channel select, channel link, or safe mode. Add a device info field safe_input_count to indicate how many channels have a safe mode control, and use the presence of the input select and input link switch configuration parameters to determine if those controls should be created. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <167f04a37d0fb23f3077705df835adbc4f2b6a8e.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for config items with size = 32Geoffrey D. Bennett
Update scarlett2_usb_get_config() to support 32-bit values which are needed by the upcoming Vocaster support. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <ee35dce0172b2aa3fec8163ab8f35bdc35a141bd.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add pbuf field to struct scarlett2_configGeoffrey D. Bennett
scarlett2_usb_set_config() was using size = 0 as a signal to use the parameter buffer. Replace that with an explicit indication (pbuf = 1), as the upcoming Vocaster support has a config item written via the parameter buffer with size = 1 rather than the implicit size of 8. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <50a7d85bb04f9a7f13f667c70a706826c8d3ef93.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Rename gen4_write_addr to param_buf_addrGeoffrey D. Bennett
The location pointed to by gen4_write_addr and gen4_write_addr + 1 is officially known as the parameter buffer. Update the code to match. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <aa36ecb8d3ce67387b5edf6c900f0b8a509241ce.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Add support for reading from flashGeoffrey D. Bennett
Add hwdep read op so flash segments can be read. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <800d20a801e8c59c2905c82ecae5676cd4f31429.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Implement handling of the ACK notificationGeoffrey D. Bennett
After scarlett2_usb() sends a command, it seems that we should wait for an ACK before attempting to read the response. Not doing that didn't seem necessary previously but seems to be causing occasional issues with 4th Gen devices. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <452d1263c40fa8eba1cfb24e2055e40a84cbc437.1710264833.git.g@b4.vu>
2024-04-18ALSA: scarlett2: Move initialisation code lower in the sourceGeoffrey D. Bennett
So that more forward declarations won't be required when we add handling of the ACK notification, move the initialisation functions to after the notification functions. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <0922071cb8be99a2394705de27b917d1e4e46f3f.1710264833.git.g@b4.vu>
2024-04-02ALSA: line6: Zero-initialize message buffersTakashi Iwai
For shutting up spurious KMSAN uninit-value warnings, just replace kmalloc() calls with kzalloc() for the buffers used for communications. There should be no real issue with the original code, but it's still better to cover. Reported-by: syzbot+7fb05ccf7b3d2f9617b3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/00000000000084b18706150bcca5@google.com Message-ID: <20240402063628.26609-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-17Revert "ALSA: usb-audio: Name feature ctl using output if input is PCM"Takashi Iwai
This reverts commit 1601cd53c7e3197181277326dbfc131d20a74e46. This fix is applied globally to all devices, and it may change the existing control names. When the devices are managed with the fixed configuration like UCM, such control name mismatch may lead to significant regressions. For avoiding that kind of regression, we would need to apply such changes conditionally, but it'd take time to settle down. While the original fix is a good thing in general, in order to address the regression, let's revert the change for now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218605 Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Message-ID: <20240316083744.28126-1-tiwai@suse.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-13ALSA: usb-audio: Stop parsing channels bits when all channels are found.Johan Carlsson
If a usb audio device sets more bits than the amount of channels it could write outside of the map array. Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering> Fixes: 04324ccc75f9 ("ALSA: usb-audio: add channel map support") Message-ID: <20240313081509.9801-1-johan.carlsson@teenage.engineering> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen input gain range againGeoffrey D. Bennett
The 4th Gen input preamp gain range is 0dB to +69dB, although the control values range from 0 to 70. Replace SCARLETT2_MAX_GAIN with SCARLETT2_MAX_GAIN_VALUE and SCARLETT2_MAX_GAIN_DB, and update the TLV again. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: a45cf0a08347 ("ALSA: scarlett2: Fix Scarlett 4th Gen input gain range") Message-ID: <Ze7OMA8ntG7KteGa@m.b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen input gain rangeGeoffrey D. Bennett
The input gain range TLV was declared as -70dB to 0dB, but the preamp gain range is actually 0dB to +70dB. Rename SCARLETT2_GAIN_BIAS to SCARLETT2_MAX_GAIN and update the TLV to fix. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <9168317b5ac5335943d3f14dbcd1cc2d9b2299d0.1710047969.git.g@b4.vu>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen autogain status valuesGeoffrey D. Bennett
The meanings of the raw_auto_gain_status values were originally guessed through experimentation, but the official names have now been discovered. Update the autogain status control strings accordingly. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <8bd12a5e7dc714801dd9887c4bc5cb35c384e27c.1710047969.git.g@b4.vu>
2024-03-11ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detectionGeoffrey D. Bennett
The value currently being read to determine the low-voltage state is actually the front panel state. Fix the code to use the correct offset for the low-voltage state. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Fixes: d7cfa2fdfc8a ("ALSA: scarlett2: Add power status control") Signed-off-by: Takashi Iwai <tiwai@suse.de> Message-ID: <d97b7d87f43b0e54f37e1552394be2f3ae182704.1710047969.git.g@b4.vu>
2024-03-04ALSA: usb-audio: Name feature ctl using output if input is PCMKenny Levinsen
When building feature controls from a unit without a name, we try to derive a name first from the feature unit's input, then fall back to the output terminal. If a feature unit connects directly to a "USB Streaming" input terminal rather than a mixer or other virtual type, the control receives the somewhat meaningless name "PCM", even if the output had a descriptive type such as "Headset" or "Speaker". Here is an example of such AudioControl descriptor from a USB headset which ends up named "PCM Playback" and is therefore not recognized as headphones by userspace: AudioControl Interface Descriptor: bLength 12 bDescriptorType 36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 4 wTerminalType 0x0101 USB Streaming bAssocTerminal 5 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType 36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0402 Headset bAssocTerminal 4 bSourceID 6 iTerminal 0 AudioControl Interface Descriptor: bLength 13 bDescriptorType 36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 6 bSourceID 4 bControlSize 2 bmaControls(0) 0x0002 Volume Control bmaControls(1) 0x0000 bmaControls(2) 0x0000 iFeature 0 Other headsets and DACs I tried that used their output terminal for naming only did so due to their input being an unnamed sidetone mixer. Instead of always starting with the input terminal, check the type of it first. If it seems uninteresting, invert the order and use the output terminal first for naming. This makes userspace recognize headsets with simple controls as headphones, and leads to more consistent naming of playback devices based on their outputs irrespective of sidetone mixers. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20240301231107.42679-1-kl@kl.wtf Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-15ALSA: usb-audio: More relaxed check of MIDI jack namesTakashi Iwai
The USB audio driver tries to retrieve MIDI jack name strings that can be used for rawmidi substream names and sequencer port names, but its checking is too strict: often the firmware provides the jack info for unexpected directions, and then we miss the info although it's present. In this patch, the code to extract the jack info is changed to allow both in and out directions in a single loop. That is, the former two functions to obtain the descriptor pointers for jack in and out are changed to a single function that returns iJack of the corresponding jack ID, no matter which direction is used. It's a code simplification at the same time as well as the fix. Fixes: eb596e0fd13c ("ALSA: usb-audio: generate midi streaming substream names from jack names") Link: https://lore.kernel.org/r/20240215153144.26047-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-02-01ALSA: usb-audio: Ignore clock selector errors for single connectionAlexander Tsoy
For devices with multiple clock sources connected to a selector, we need to check what a clock selector control request has returned. This is needed to ensure that a requested clock source is indeed selected and for autoclock feature to work. For devices with single clock source connected, if we get an error there is nothing else we can do about it. We can't skip clock selector setup as it is required by some devices. So lets just ignore error in this case. This should fix various buggy Mackie devices: [ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) There is also interesting info from the Windows documentation [1] (this is probably why manufacturers dont't even test this feature): "The USB Audio 2.0 driver doesn't support clock selection. The driver uses the Clock Source Entity, which is selected by default and never issues a Clock Selector Control SET CUR request." Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342 Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29ALSA: usb-audio: Check presence of valid altsetting controlAlexander Tsoy
Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests. MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates: [ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1 Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-29Revert "ALSA: usb-audio: Skip setting clock selector for single connections"Alexander Tsoy
This reverts commit 67794f882adca00d043899ac248bc002751da9f6. We need to explicitly set up the clock selector to workaround a problem with the Behringer mixers. This was originally done in d2e8f641257d ("ALSA: usb-audio: Explicitly set up the clock selector") The problem with MOTU M Series mentioned in commit message was fixed in a different way by checking control capabilities of clock selectors. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240128132338.819273-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-26ALSA: usb-audio: Support read-only clock selector controlAlexander Tsoy
Clock selector control might be read-only. Add corresponding checks to prevent sending control requests that would fail. Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240125205457.28258-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-24ALSA: usb-audio: Sort quirk table entriesTakashi Iwai
The quirk table entries should be put in the USB ID order, but some entries have been put in random places. Re-sort them. Fixes: bf990c102319 ("ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue") Fixes: fd28941cff1c ("ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless") Fixes: dfd5fe19db7d ("ALSA: usb-audio: Add FIXED_RATE quirk for JBL Quantum610 Wireless") Fixes: 4a63e68a2951 ("ALSA: usb-audio: Fix microphone sound on Nexigo webcam.") Fixes: 7822baa844a8 ("ALSA: usb-audio: add quirk for RODE NT-USB+") Fixes: 4fb7c24f69c4 ("ALSA: usb-audio: Add quirk for Fiero SC-01") Fixes: 2307a0e1ca0b ("ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)") Link: https://lore.kernel.org/r/20240124155307.16996-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-24ALSA: usb-audio: add quirk for RODE NT-USB+Sean Young
The RODE NT-USB+ is marketed as a professional usb microphone, however the usb audio interface is a mess: [ 1.130977] usb 1-5: new full-speed USB device number 2 using xhci_hcd [ 1.503906] usb 1-5: config 1 has an invalid interface number: 5 but max is 4 [ 1.503912] usb 1-5: config 1 has no interface number 4 [ 1.519689] usb 1-5: New USB device found, idVendor=19f7, idProduct=0035, bcdDevice= 1.09 [ 1.519695] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.519697] usb 1-5: Product: RØDE NT-USB+ [ 1.519699] usb 1-5: Manufacturer: RØDE [ 1.519700] usb 1-5: SerialNumber: 1D773A1A [ 8.327495] usb 1-5: 1:1: cannot get freq at ep 0x82 [ 8.344500] usb 1-5: 1:2: cannot get freq at ep 0x82 [ 8.365499] usb 1-5: 2:1: cannot get freq at ep 0x2 Add QUIRK_FLAG_GET_SAMPLE_RATE to work around the broken sample rate get. I have asked Rode support to fix it, but they show no interest. Signed-off-by: Sean Young <sean@mess.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240124151524.23314-1-sean@mess.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-24ALSA: usb-audio: Add delay quirk for MOTU M Series 2nd revisionAlexander Tsoy
Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601 Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240124130239.358298-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-24ALSA: usb-audio: fix typoJacob Siverskog
fix typo in midi fallback log. Signed-off-by: Jacob Siverskog <jacob@teenage.engineering> Fixes: ff49d1df79ae ("ALSA: usb-audio: USB MIDI 2.0 UMP support") Link: https://lore.kernel.org/r/20240124101827.35433-1-jacob@teenage.engineering Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-23ALSA: usb-audio: Skip setting clock selector for single connectionsAlexander Tsoy
Since commit 086b957cc17f5 ("ALSA: usb-audio: Skip the clock selector inquiry for single connections") we are already skipping clock selector inquiry if only one clock source is connected, but we are still sending a set request. Lets skip that too. This should fix errors when setting a sample rate on devices that don't have any controls present within the clock selector. An example of such device is the new revision of MOTU M Series (07fd:000b): AudioControl Interface Descriptor: bLength 8 bDescriptorType 36 bDescriptorSubtype 11 (CLOCK_SELECTOR) bClockID 1 bNrInPins 1 baCSourceID(0) 2 bmControls 0x00 iClockSelector 0 Perhaps we also should check if clock selectors are readable and writeable like we already do for clock sources, but this is out of scope of this patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217601 Signed-off-by: Alexander Tsoy <alexander@tsoy.me> Link: https://lore.kernel.org/r/20240123134635.54026-1-alexander@tsoy.me Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-23ALSA: usb-audio: Add a quirk for Yamaha YIT-W12TX transmitterJulian Sikorski
The device fails to initialize otherwise, giving the following error: [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 Signed-off-by: Julian Sikorski <belegdol+github@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240123084935.2745-1-belegdol+github@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-01-15ALSA: scarlett2: Fix yet more -Wformat-truncation warningsTakashi Iwai
The recent code change introduced a few false-positive compile warnings with -Wformat-trucation again. Suppress them by replacing snprintf() with scnprintf(). Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401062344.AzZCYlpa-lkp@intel.com/ Link: https://lore.kernel.org/r/20240112171000.31855-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4Geoffrey D. Bennett
When the Direct button on the Solo Gen 4 is held for 3 seconds, the PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer Outputs E and F. This patch adds the corresponding ALSA control. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4Geoffrey D. Bennett
Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config sets, and device info data. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b33526d3b7a56bb2c86aa4eb2137a415bd23f1ce.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add R/O headphone volume controlGeoffrey D. Bennett
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition to a R/O master volume control (which is already supported). Mark the new scarlett2_notify_volume() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add minimum firmware version checkGeoffrey D. Bennett
Early firmware for the Scarlett Gen 4 devices has sufficient differences that it is better to enforce a minimum firmware version than to try and work around those differences. Add a minimum firmware version field to the device info struct, and display a message if the firmware version is too old. Only create the Firmware Version and MSD (optional) controls in this case. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Rename DSP mux channelsGeoffrey D. Bennett
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the ALSA controls would refer to them "Mix X" and "Mixer Input X". This patch fixes them to be called "DSP X" and "DSP Input X". Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for DSP mux channelsGeoffrey D. Bennett
The DSP mux channels in the Scarlett 4th Gen appear as SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer controls. Add a dsp_count option to the device info struct to exclude those DSP channels from the num_mix_in/num_mix_out counts. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Add support for custom Gen 4 Direct Monitor mixesGeoffrey D. Bennett
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces are configurable. This patch adds ALSA controls for the gains which are copied to the mixer when Direct Monitor is enabled. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Handle Gen 4 Direct Monitor mix updatesGeoffrey D. Bennett
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces is used, the Mix A and B gains are updated by the interface. This patch calls snd_ctl_notify() for the ALSA mix controls when a Direct Monitor notification is received. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
2023-12-29ALSA: scarlett2: Store mix_ctls for Gen 4 Direct MonitorGeoffrey D. Bennett
The Scarlett 4th Gen small interfaces have a software-controllable mixer like the large 2nd and 3rd Gen interfaces do. Pressing the "Direct" button on the interface updates the mixer controls, which this driver hasn't needed to deal with previously. This commit stores the ALSA mixer controls, and adds a mix_updated flag so that the controls can be updated when a notification is received. Signed-off-by: Geoffrey D. Bennett <g@b4.vu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 04:38:23 +0000